1 2This is an enhanced version of the CMU BOOTP server which was derived 3from the original BOOTP server created by Bill Croft at Stanford. 4This version merges all the enhancements and bug-fixes from the 5NetBSD, Columbia, and other versions. 6 7Please direct questions, comments, and bug reports to the list: 8 <bootp@andrew.cmu.edu> 9 10You can subscribe to this mailing list by sending mail to: 11 bootp-request@andrew.cmu.edu 12(The body of the message should contain: "Add <your-address>") 13 14[ From the NetBSD README file: ] 15 16BOOTPD is a useful adjunct to the nfs diskless boot EPROM code. 17 18The alternatives for initiating a boot of a kernel across a network 19are to use RARP protocol, or BOOTP protocol. BOOTP is more flexible; 20it allows additional items of information to be returned to the 21booting client; it also supports booting across gateways. 22 23[ From the CMU README file: ] 24 25Notes: 261) BOOTP was originally designed and implemented by Bill Croft at Stanford. 27 Much of the credit for the ideas and the code goes to him. We've added 28 code to support the vendor specific area of the packet as specified in 29 RFC1048. We've also improved the host lookup algorithm and added some 30 extra logging. 31 322) The server now uses syslog to do logging. Specifically it uses the 4.3bsd 33 version. I've #ifdef'd all of these calls. If you are running 4.2 you 34 should compile without the -DSYSLOG switch. 35 363) You must update your /etc/services file to contain the following two lines: 37 bootps 67/udp bootp # BOOTP Server 38 bootpc 68/udp # BOOTP Client 39 404) Edit the bootptab. It has some explanitory comments, and there 41 is a manual entry describing its format (bootptab.5) 42 If you have any questions, just let us know. 43 44Construction: 45 [ See the file Installation which is more up-to-date. -gwr ] 46 47 Make sure all of the files exist first. If anything is missing, 48 please contact either Walt Wimer or Drew Perkins by E-mail or phone. 49 Addresses and phone numbers are listed below. 50 51 Type 'make'. The options at present are: -DSYSLOG which enables logging 52 code, -DDEBUG which enables table dumping via signals, and -DVEND_CMU 53 which enables the CMU extensions for CMU PC/IP. 54 55 Edit the bootptab. The man page and the comments in the file should 56 explain how to go about doing so. If you have any problems, let me know. 57 58 Type 'make install'. This should put all of the files in the right place. 59 60 Edit your /etc/rc.local or /etc/inetd.conf file to start up bootpd upon 61 reboot. The following is a sample /etc/inetd.conf entry: 62 # BOOTP server 63 bootps dgram udp wait root /usr/etc/bootpd bootpd -i 64 65Care and feeding: 66 If you change the interface cards on your host or add new hosts you will 67 need to update /etc/bootptab. Just edit it as before. Once you write 68 it back out, bootpd will notice that there is a new copy and will 69 reread it the next time it gets a request. 70 71 If your bootp clients don't get a response then several things might be 72 wrong. Most often, the entry for that host is not in the database. 73 Check the hardware address and then check the entry and make sure 74 everything is right. Other problems include the server machine crashing, 75 bad cables, and the like. If your network is very congested you should 76 try making your bootp clients send additional requests before giving up. 77 78 79November 7, 1988 80 81 82Walter L. Wimer Drew D. Perkins 83ww0n@andrew.cmu.edu ddp@andrew.cmu.edu 84(412) 268-6252 (412) 268-8576 85 864910 Forbes Ave 87Pittsburgh, PA 15213 88 89[ Contents description by file: ] 90 91Announce* Text of release announcements 92Changes Change history, reverse chronological 93ConvOldTab.sh Script to convert old (1.x) bootptab files 94Installation Instructions for building and installing 95Makefile* for "make" 96README This file 97ToDo Things not yet done 98bootp.h The protocol header file 99bootpd.8 Manual page for bootpd, boopgw 100bootpd.c BOOTP server main module 101bootpd.h header for above (and others) 102bootpef.8 Manual page for bootpef 103bootpef.c BOOTP extension file compiler 104bootpgw.c BOOTP gateway main module 105bootptab.5 A manual describing the bootptab format 106bootptab.cmu A sample database file for the server 107bootptab.mcs Another sample from <gwr@mc.com> 108bootptest.8 Manual page for bootptest 109bootptest.c BOOTP test program (fake client) 110bootptest.h header for above 111dovend.c Vendor Option builder (for bootpd, bootpef) 112dovend.h header for above 113dumptab.c Implements debugging dump for bootpd 114getether.c For bootptest (not used yet) 115getether.h header for above 116getif.c Get network interface info. 117getif.h header for above 118hash.c The hash table module 119hash.h header for above 120hwaddr.c Hardware address support 121hwaddr.h header for above 122lookup.c Internet Protocol address lookup 123lookup.h header for above 124patchlevel.h Holds version numbers 125print-bootp.c Prints BOOTP packets (taken from BSD tcpdump) 126readfile.c The configuration file-reading routines 127readfile.h header for above 128report.c Does syslog-style messages 129report.h header for above 130strerror.c Library errno-to-string (for systems lacking it) 131syslog.conf Sample config file for syslogd(8) 132syslog.h For systems that lack syslog(3) 133try*.c Test programs (for debugging) 134tzone.c Get timezone offset 135tzone.h header for above 136