xref: /freebsd/lib/msun/src/s_log1p.c (revision 0dd5a5603e7a33d976f8e6015620bbc79839c609)

/*
 * ====================================================
 * Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
 *
 * Developed at SunPro, a Sun Microsystems, Inc. business.
 * Permission to use, copy, modify, and distribute this
 * software is freely granted, provided that this notice
 * is preserved.
 * ====================================================
 */

/* double log1p(double x)
 *
 * Method :
 *   1. Argument Reduction: find k and f such that
 *			1+x = 2^k * (1+f),
 *	   where  sqrt(2)/2 < 1+f < sqrt(2) .
 *
 *      Note. If k=0, then f=x is exact. However, if k!=0, then f
 *	may not be representable exactly. In that case, a correction
 *	term is need. Let u=1+x rounded. Let c = (1+x)-u, then
 *	log(1+x) - log(u) ~ c/u. Thus, we proceed to compute log(u),
 *	and add back the correction term c/u.
 *	(Note: when x > 2**53, one can simply return log(x))
 *
 *   2. Approximation of log1p(f).
 *	Let s = f/(2+f) ; based on log(1+f) = log(1+s) - log(1-s)
 *		 = 2s + 2/3 s**3 + 2/5 s**5 + .....,
 *	     	 = 2s + s*R
 *      We use a special Reme algorithm on [0,0.1716] to generate
 * 	a polynomial of degree 14 to approximate R The maximum error
 *	of this polynomial approximation is bounded by 2**-58.45. In
 *	other words,
 *		        2      4      6      8      10      12      14
 *	    R(z) ~ Lp1*s +Lp2*s +Lp3*s +Lp4*s +Lp5*s  +Lp6*s  +Lp7*s
 *  	(the values of Lp1 to Lp7 are listed in the program)
 *	and
 *	    |      2          14          |     -58.45
 *	    | Lp1*s +...+Lp7*s    -  R(z) | <= 2
 *	    |                             |
 *	Note that 2s = f - s*f = f - hfsq + s*hfsq, where hfsq = f*f/2.
 *	In order to guarantee error in log below 1ulp, we compute log
 *	by
 *		log1p(f) = f - (hfsq - s*(hfsq+R)).
 *
 *	3. Finally, log1p(x) = k*ln2 + log1p(f).
 *		 	     = k*ln2_hi+(f-(hfsq-(s*(hfsq+R)+k*ln2_lo)))
 *	   Here ln2 is split into two floating point number:
 *			ln2_hi + ln2_lo,
 *	   where n*ln2_hi is always exact for |n| < 2000.
 *
 * Special cases:
 *	log1p(x) is NaN with signal if x < -1 (including -INF) ;
 *	log1p(+INF) is +INF; log1p(-1) is -INF with signal;
 *	log1p(NaN) is that NaN with no signal.
 *
 * Accuracy:
 *	according to an error analysis, the error is always less than
 *	1 ulp (unit in the last place).
 *
 * Constants:
 * The hexadecimal values are the intended ones for the following
 * constants. The decimal values may be used, provided that the
 * compiler will convert from decimal to binary accurately enough
 * to produce the hexadecimal values shown.
 *
 * Note: Assuming log() return accurate answer, the following
 * 	 algorithm can be used to compute log1p(x) to within a few ULP:
 *
 *		u = 1+x;
 *		if(u==1.0) return x ; else
 *			   return log(u)*(x/(u-1.0));
 *
 *	 See HP-15C Advanced Functions Handbook, p.193.
 */

#include <float.h>

#include "math.h"
#include "math_private.h"

static const double
ln2_hi  =  6.93147180369123816490e-01,	/* 3fe62e42 fee00000 */
ln2_lo  =  1.90821492927058770002e-10,	/* 3dea39ef 35793c76 */
two54   =  1.80143985094819840000e+16,  /* 43500000 00000000 */
Lp1 = 6.666666666666735130e-01,  /* 3FE55555 55555593 */
Lp2 = 3.999999999940941908e-01,  /* 3FD99999 9997FA04 */
Lp3 = 2.857142874366239149e-01,  /* 3FD24924 94229359 */
Lp4 = 2.222219843214978396e-01,  /* 3FCC71C5 1D8E78AF */
Lp5 = 1.818357216161805012e-01,  /* 3FC74664 96CB03DE */
Lp6 = 1.531383769920937332e-01,  /* 3FC39A09 D078C69F */
Lp7 = 1.479819860511658591e-01;  /* 3FC2F112 DF3E5244 */

static const double zero = 0.0;
static volatile double vzero = 0.0;

double
log1p(double x)
{
	double hfsq,f,c,s,z,R,u;
	int32_t k,hx,hu,ax;

	GET_HIGH_WORD(hx,x);
	ax = hx&0x7fffffff;

	k = 1;
	if (hx < 0x3FDA827A) {			/* 1+x < sqrt(2)+ */
	    if(ax>=0x3ff00000) {		/* x <= -1.0 */
		if(x==-1.0) return -two54/vzero; /* log1p(-1)=+inf */
		else return (x-x)/(x-x);	/* log1p(x<-1)=NaN */
	    }
	    if(ax<0x3e200000) {			/* |x| < 2**-29 */
		if(two54+x>zero			/* raise inexact */
	            &&ax<0x3c900000) 		/* |x| < 2**-54 */
		    return x;
		else
		    return x - x*x*0.5;
	    }
	    if(hx>0||hx<=((int32_t)0xbfd2bec4)) {
		k=0;f=x;hu=1;}		/* sqrt(2)/2- <= 1+x < sqrt(2)+ */
	}
	if (hx >= 0x7ff00000) return x+x;
	if(k!=0) {
	    if(hx<0x43400000) {
		STRICT_ASSIGN(double,u,1.0+x);
		GET_HIGH_WORD(hu,u);
	        k  = (hu>>20)-1023;
	        c  = (k>0)? 1.0-(u-x):x-(u-1.0);/* correction term */
		c /= u;
	    } else {
		u  = x;
		GET_HIGH_WORD(hu,u);
	        k  = (hu>>20)-1023;
		c  = 0;
	    }
	    hu &= 0x000fffff;
	    /*
	     * The approximation to sqrt(2) used in thresholds is not
	     * critical.  However, the ones used above must give less
	     * strict bounds than the one here so that the k==0 case is
	     * never reached from here, since here we have committed to
	     * using the correction term but don't use it if k==0.
	     */
	    if(hu<0x6a09e) {			/* u ~< sqrt(2) */
	        SET_HIGH_WORD(u,hu|0x3ff00000);	/* normalize u */
	    } else {
	        k += 1;
		SET_HIGH_WORD(u,hu|0x3fe00000);	/* normalize u/2 */
	        hu = (0x00100000-hu)>>2;
	    }
	    f = u-1.0;
	}
	hfsq=0.5*f*f;
	if(hu==0) {	/* |f| < 2**-20 */
	    if(f==zero) {
		if(k==0) {
		    return zero;
		} else {
		    c += k*ln2_lo;
		    return k*ln2_hi+c;
		}
	    }
	    R = hfsq*(1.0-0.66666666666666666*f);
	    if(k==0) return f-R; else
	    	     return k*ln2_hi-((R-(k*ln2_lo+c))-f);
	}
 	s = f/(2.0+f);
	z = s*s;
	R = z*(Lp1+z*(Lp2+z*(Lp3+z*(Lp4+z*(Lp5+z*(Lp6+z*Lp7))))));
	if(k==0) return f-(hfsq-s*(hfsq+R)); else
		 return k*ln2_hi-((hfsq-(s*(hfsq+R)+(k*ln2_lo+c)))-f);
}

#if (LDBL_MANT_DIG == 53)
__weak_reference(log1p, log1pl);
#endif