xref: /freebsd/lib/libc/gmon/mcount.c (revision 38f0b757fd84d17d0fc24739a7cda160c4516d81)
1 /*-
2  * Copyright (c) 1983, 1992, 1993
3  *	The Regents of the University of California.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 4. Neither the name of the University nor the names of its contributors
14  *    may be used to endorse or promote products derived from this software
15  *    without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
18  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
21  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27  * SUCH DAMAGE.
28  */
29 
30 #if !defined(_KERNEL) && defined(LIBC_SCCS) && !defined(lint)
31 static char sccsid[] = "@(#)mcount.c	8.1 (Berkeley) 6/4/93";
32 #endif
33 #include <sys/cdefs.h>
34 __FBSDID("$FreeBSD$");
35 
36 #include <sys/param.h>
37 #include <sys/gmon.h>
38 #ifdef _KERNEL
39 #include <sys/systm.h>
40 #include <vm/vm.h>
41 #include <vm/vm_param.h>
42 #include <vm/pmap.h>
43 void	bintr(void);
44 void	btrap(void);
45 void	eintr(void);
46 void	user(void);
47 #endif
48 #include <machine/atomic.h>
49 
50 /*
51  * mcount is called on entry to each function compiled with the profiling
52  * switch set.  _mcount(), which is declared in a machine-dependent way
53  * with _MCOUNT_DECL, does the actual work and is either inlined into a
54  * C routine or called by an assembly stub.  In any case, this magic is
55  * taken care of by the MCOUNT definition in <machine/profile.h>.
56  *
57  * _mcount updates data structures that represent traversals of the
58  * program's call graph edges.  frompc and selfpc are the return
59  * address and function address that represents the given call graph edge.
60  *
61  * Note: the original BSD code used the same variable (frompcindex) for
62  * both frompcindex and frompc.  Any reasonable, modern compiler will
63  * perform this optimization.
64  */
65 /* _mcount; may be static, inline, etc */
66 _MCOUNT_DECL(uintfptr_t frompc, uintfptr_t selfpc)
67 {
68 #ifdef GUPROF
69 	u_int delta;
70 #endif
71 	fptrdiff_t frompci;
72 	u_short *frompcindex;
73 	struct tostruct *top, *prevtop;
74 	struct gmonparam *p;
75 	long toindex;
76 #ifdef _KERNEL
77 	MCOUNT_DECL(s)
78 #endif
79 
80 	p = &_gmonparam;
81 #ifndef GUPROF			/* XXX */
82 	/*
83 	 * check that we are profiling
84 	 * and that we aren't recursively invoked.
85 	 */
86 	if (p->state != GMON_PROF_ON)
87 		return;
88 #endif
89 #ifdef _KERNEL
90 	MCOUNT_ENTER(s);
91 #else
92 	if (!atomic_cmpset_acq_int(&p->state, GMON_PROF_ON, GMON_PROF_BUSY))
93 		return;
94 #endif
95 	frompci = frompc - p->lowpc;
96 
97 #ifdef _KERNEL
98 	/*
99 	 * When we are called from an exception handler, frompci may be
100 	 * for a user address.  Convert such frompci's to the index of
101 	 * user() to merge all user counts.
102 	 */
103 	if (frompci >= p->textsize) {
104 		if (frompci + p->lowpc
105 		    >= (uintfptr_t)(VM_MAXUSER_ADDRESS + UPAGES * PAGE_SIZE))
106 			goto done;
107 		frompci = (uintfptr_t)user - p->lowpc;
108 		if (frompci >= p->textsize)
109 		    goto done;
110 	}
111 #endif
112 
113 #ifdef GUPROF
114 	if (p->state != GMON_PROF_HIRES)
115 		goto skip_guprof_stuff;
116 	/*
117 	 * Look at the clock and add the count of clock cycles since the
118 	 * clock was last looked at to a counter for frompc.  This
119 	 * solidifies the count for the function containing frompc and
120 	 * effectively starts another clock for the current function.
121 	 * The count for the new clock will be solidified when another
122 	 * function call is made or the function returns.
123 	 *
124 	 * We use the usual sampling counters since they can be located
125 	 * efficiently.  4-byte counters are usually necessary.
126 	 *
127 	 * There are many complications for subtracting the profiling
128 	 * overheads from the counts for normal functions and adding
129 	 * them to the counts for mcount(), mexitcount() and cputime().
130 	 * We attempt to handle fractional cycles, but the overheads
131 	 * are usually underestimated because they are calibrated for
132 	 * a simpler than usual setup.
133 	 */
134 	delta = cputime() - p->mcount_overhead;
135 	p->cputime_overhead_resid += p->cputime_overhead_frac;
136 	p->mcount_overhead_resid += p->mcount_overhead_frac;
137 	if ((int)delta < 0)
138 		*p->mcount_count += delta + p->mcount_overhead
139 				    - p->cputime_overhead;
140 	else if (delta != 0) {
141 		if (p->cputime_overhead_resid >= CALIB_SCALE) {
142 			p->cputime_overhead_resid -= CALIB_SCALE;
143 			++*p->cputime_count;
144 			--delta;
145 		}
146 		if (delta != 0) {
147 			if (p->mcount_overhead_resid >= CALIB_SCALE) {
148 				p->mcount_overhead_resid -= CALIB_SCALE;
149 				++*p->mcount_count;
150 				--delta;
151 			}
152 			KCOUNT(p, frompci) += delta;
153 		}
154 		*p->mcount_count += p->mcount_overhead_sub;
155 	}
156 	*p->cputime_count += p->cputime_overhead;
157 skip_guprof_stuff:
158 #endif /* GUPROF */
159 
160 #ifdef _KERNEL
161 	/*
162 	 * When we are called from an exception handler, frompc is faked
163 	 * to be for where the exception occurred.  We've just solidified
164 	 * the count for there.  Now convert frompci to the index of btrap()
165 	 * for trap handlers and bintr() for interrupt handlers to make
166 	 * exceptions appear in the call graph as calls from btrap() and
167 	 * bintr() instead of calls from all over.
168 	 */
169 	if ((uintfptr_t)selfpc >= (uintfptr_t)btrap
170 	    && (uintfptr_t)selfpc < (uintfptr_t)eintr) {
171 		if ((uintfptr_t)selfpc >= (uintfptr_t)bintr)
172 			frompci = (uintfptr_t)bintr - p->lowpc;
173 		else
174 			frompci = (uintfptr_t)btrap - p->lowpc;
175 	}
176 #endif
177 
178 	/*
179 	 * check that frompc is a reasonable pc value.
180 	 * for example:	signal catchers get called from the stack,
181 	 *		not from text space.  too bad.
182 	 */
183 	if (frompci >= p->textsize)
184 		goto done;
185 
186 	frompcindex = &p->froms[frompci / (p->hashfraction * sizeof(*p->froms))];
187 	toindex = *frompcindex;
188 	if (toindex == 0) {
189 		/*
190 		 *	first time traversing this arc
191 		 */
192 		toindex = ++p->tos[0].link;
193 		if (toindex >= p->tolimit)
194 			/* halt further profiling */
195 			goto overflow;
196 
197 		*frompcindex = toindex;
198 		top = &p->tos[toindex];
199 		top->selfpc = selfpc;
200 		top->count = 1;
201 		top->link = 0;
202 		goto done;
203 	}
204 	top = &p->tos[toindex];
205 	if (top->selfpc == selfpc) {
206 		/*
207 		 * arc at front of chain; usual case.
208 		 */
209 		top->count++;
210 		goto done;
211 	}
212 	/*
213 	 * have to go looking down chain for it.
214 	 * top points to what we are looking at,
215 	 * prevtop points to previous top.
216 	 * we know it is not at the head of the chain.
217 	 */
218 	for (; /* goto done */; ) {
219 		if (top->link == 0) {
220 			/*
221 			 * top is end of the chain and none of the chain
222 			 * had top->selfpc == selfpc.
223 			 * so we allocate a new tostruct
224 			 * and link it to the head of the chain.
225 			 */
226 			toindex = ++p->tos[0].link;
227 			if (toindex >= p->tolimit)
228 				goto overflow;
229 
230 			top = &p->tos[toindex];
231 			top->selfpc = selfpc;
232 			top->count = 1;
233 			top->link = *frompcindex;
234 			*frompcindex = toindex;
235 			goto done;
236 		}
237 		/*
238 		 * otherwise, check the next arc on the chain.
239 		 */
240 		prevtop = top;
241 		top = &p->tos[top->link];
242 		if (top->selfpc == selfpc) {
243 			/*
244 			 * there it is.
245 			 * increment its count
246 			 * move it to the head of the chain.
247 			 */
248 			top->count++;
249 			toindex = prevtop->link;
250 			prevtop->link = top->link;
251 			top->link = *frompcindex;
252 			*frompcindex = toindex;
253 			goto done;
254 		}
255 
256 	}
257 done:
258 #ifdef _KERNEL
259 	MCOUNT_EXIT(s);
260 #else
261 	atomic_store_rel_int(&p->state, GMON_PROF_ON);
262 #endif
263 	return;
264 overflow:
265 	atomic_store_rel_int(&p->state, GMON_PROF_ERROR);
266 #ifdef _KERNEL
267 	MCOUNT_EXIT(s);
268 #endif
269 	return;
270 }
271 
272 /*
273  * Actual definition of mcount function.  Defined in <machine/profile.h>,
274  * which is included by <sys/gmon.h>.
275  */
276 MCOUNT
277 
278 #ifdef GUPROF
279 void
280 mexitcount(selfpc)
281 	uintfptr_t selfpc;
282 {
283 	struct gmonparam *p;
284 	uintfptr_t selfpcdiff;
285 
286 	p = &_gmonparam;
287 	selfpcdiff = selfpc - (uintfptr_t)p->lowpc;
288 	if (selfpcdiff < p->textsize) {
289 		u_int delta;
290 
291 		/*
292 		 * Solidify the count for the current function.
293 		 */
294 		delta = cputime() - p->mexitcount_overhead;
295 		p->cputime_overhead_resid += p->cputime_overhead_frac;
296 		p->mexitcount_overhead_resid += p->mexitcount_overhead_frac;
297 		if ((int)delta < 0)
298 			*p->mexitcount_count += delta + p->mexitcount_overhead
299 						- p->cputime_overhead;
300 		else if (delta != 0) {
301 			if (p->cputime_overhead_resid >= CALIB_SCALE) {
302 				p->cputime_overhead_resid -= CALIB_SCALE;
303 				++*p->cputime_count;
304 				--delta;
305 			}
306 			if (delta != 0) {
307 				if (p->mexitcount_overhead_resid
308 				    >= CALIB_SCALE) {
309 					p->mexitcount_overhead_resid
310 					    -= CALIB_SCALE;
311 					++*p->mexitcount_count;
312 					--delta;
313 				}
314 				KCOUNT(p, selfpcdiff) += delta;
315 			}
316 			*p->mexitcount_count += p->mexitcount_overhead_sub;
317 		}
318 		*p->cputime_count += p->cputime_overhead;
319 	}
320 }
321 #endif /* GUPROF */
322