xref: /freebsd/lib/libc/gen/setmode.c (revision 6be3386466ab79a84b48429ae66244f21526d3df)
1 /*-
2  * SPDX-License-Identifier: BSD-3-Clause
3  *
4  * Copyright (c) 1989, 1993, 1994
5  *	The Regents of the University of California.  All rights reserved.
6  *
7  * This code is derived from software contributed to Berkeley by
8  * Dave Borman at Cray Research, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 3. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  */
34 
35 #include <sys/cdefs.h>
36 __SCCSID("@(#)setmode.c	8.2 (Berkeley) 3/25/94");
37 __FBSDID("$FreeBSD$");
38 
39 #include "namespace.h"
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/sysctl.h>
43 
44 #include <ctype.h>
45 #include <errno.h>
46 #include <limits.h>
47 #include <signal.h>
48 #include <stddef.h>
49 #include <stdlib.h>
50 #include <unistd.h>
51 
52 #ifdef SETMODE_DEBUG
53 #include <stdio.h>
54 #endif
55 #include "un-namespace.h"
56 #include "libc_private.h"
57 
58 #define	SET_LEN	6		/* initial # of bitcmd struct to malloc */
59 #define	SET_LEN_INCR 4		/* # of bitcmd structs to add as needed */
60 
61 typedef struct bitcmd {
62 	char	cmd;
63 	char	cmd2;
64 	mode_t	bits;
65 } BITCMD;
66 
67 #define	CMD2_CLR	0x01
68 #define	CMD2_SET	0x02
69 #define	CMD2_GBITS	0x04
70 #define	CMD2_OBITS	0x08
71 #define	CMD2_UBITS	0x10
72 
73 static mode_t	 get_current_umask(void);
74 static BITCMD	*addcmd(BITCMD *, mode_t, mode_t, mode_t, mode_t);
75 static void	 compress_mode(BITCMD *);
76 #ifdef SETMODE_DEBUG
77 static void	 dumpmode(BITCMD *);
78 #endif
79 
80 /*
81  * Given the old mode and an array of bitcmd structures, apply the operations
82  * described in the bitcmd structures to the old mode, and return the new mode.
83  * Note that there is no '=' command; a strict assignment is just a '-' (clear
84  * bits) followed by a '+' (set bits).
85  */
86 mode_t
87 getmode(const void *bbox, mode_t omode)
88 {
89 	const BITCMD *set;
90 	mode_t clrval, newmode, value;
91 
92 	set = (const BITCMD *)bbox;
93 	newmode = omode;
94 	for (value = 0;; set++)
95 		switch(set->cmd) {
96 		/*
97 		 * When copying the user, group or other bits around, we "know"
98 		 * where the bits are in the mode so that we can do shifts to
99 		 * copy them around.  If we don't use shifts, it gets real
100 		 * grundgy with lots of single bit checks and bit sets.
101 		 */
102 		case 'u':
103 			value = (newmode & S_IRWXU) >> 6;
104 			goto common;
105 
106 		case 'g':
107 			value = (newmode & S_IRWXG) >> 3;
108 			goto common;
109 
110 		case 'o':
111 			value = newmode & S_IRWXO;
112 common:			if (set->cmd2 & CMD2_CLR) {
113 				clrval =
114 				    (set->cmd2 & CMD2_SET) ?  S_IRWXO : value;
115 				if (set->cmd2 & CMD2_UBITS)
116 					newmode &= ~((clrval<<6) & set->bits);
117 				if (set->cmd2 & CMD2_GBITS)
118 					newmode &= ~((clrval<<3) & set->bits);
119 				if (set->cmd2 & CMD2_OBITS)
120 					newmode &= ~(clrval & set->bits);
121 			}
122 			if (set->cmd2 & CMD2_SET) {
123 				if (set->cmd2 & CMD2_UBITS)
124 					newmode |= (value<<6) & set->bits;
125 				if (set->cmd2 & CMD2_GBITS)
126 					newmode |= (value<<3) & set->bits;
127 				if (set->cmd2 & CMD2_OBITS)
128 					newmode |= value & set->bits;
129 			}
130 			break;
131 
132 		case '+':
133 			newmode |= set->bits;
134 			break;
135 
136 		case '-':
137 			newmode &= ~set->bits;
138 			break;
139 
140 		case 'X':
141 			if (omode & (S_IFDIR|S_IXUSR|S_IXGRP|S_IXOTH))
142 				newmode |= set->bits;
143 			break;
144 
145 		case '\0':
146 		default:
147 #ifdef SETMODE_DEBUG
148 			(void)printf("getmode:%04o -> %04o\n", omode, newmode);
149 #endif
150 			return (newmode);
151 		}
152 }
153 
154 #define	ADDCMD(a, b, c, d)						\
155 	if (set >= endset) {						\
156 		BITCMD *newset;						\
157 		setlen += SET_LEN_INCR;					\
158 		newset = reallocarray(saveset, setlen, sizeof(BITCMD));	\
159 		if (newset == NULL)					\
160 			goto out;					\
161 		set = newset + (set - saveset);				\
162 		saveset = newset;					\
163 		endset = newset + (setlen - 2);				\
164 	}								\
165 	set = addcmd(set, (mode_t)(a), (mode_t)(b), (mode_t)(c), (d))
166 
167 #define	STANDARD_BITS	(S_ISUID|S_ISGID|S_IRWXU|S_IRWXG|S_IRWXO)
168 
169 void *
170 setmode(const char *p)
171 {
172 	int serrno;
173 	char op, *ep;
174 	BITCMD *set, *saveset, *endset;
175 	mode_t mask, perm, permXbits, who;
176 	long perml;
177 	int equalopdone;
178 	u_int setlen;
179 
180 	if (!*p) {
181 		errno = EINVAL;
182 		return (NULL);
183 	}
184 
185 	/*
186 	 * Get a copy of the mask for the permissions that are mask relative.
187 	 * Flip the bits, we want what's not set.
188 	 */
189 	mask = ~get_current_umask();
190 
191 	setlen = SET_LEN + 2;
192 
193 	if ((set = malloc(setlen * sizeof(BITCMD))) == NULL)
194 		return (NULL);
195 	saveset = set;
196 	endset = set + (setlen - 2);
197 
198 	/*
199 	 * If an absolute number, get it and return; disallow non-octal digits
200 	 * or illegal bits.
201 	 */
202 	if (isdigit((unsigned char)*p)) {
203 		errno = 0;
204 		perml = strtol(p, &ep, 8);
205 		if (*ep) {
206 			errno = EINVAL;
207 			goto out;
208 		}
209 		if (errno == ERANGE && (perml == LONG_MAX || perml == LONG_MIN))
210 			goto out;
211 		if (perml & ~(STANDARD_BITS|S_ISTXT)) {
212 			errno = EINVAL;
213 			goto out;
214 		}
215 		perm = (mode_t)perml;
216 		ADDCMD('=', (STANDARD_BITS|S_ISTXT), perm, mask);
217 		set->cmd = 0;
218 		return (saveset);
219 	}
220 
221 	/*
222 	 * Build list of structures to set/clear/copy bits as described by
223 	 * each clause of the symbolic mode.
224 	 */
225 	equalopdone = 0;
226 	for (;;) {
227 		/* First, find out which bits might be modified. */
228 		for (who = 0;; ++p) {
229 			switch (*p) {
230 			case 'a':
231 				who |= STANDARD_BITS;
232 				break;
233 			case 'u':
234 				who |= S_ISUID|S_IRWXU;
235 				break;
236 			case 'g':
237 				who |= S_ISGID|S_IRWXG;
238 				break;
239 			case 'o':
240 				who |= S_IRWXO;
241 				break;
242 			default:
243 				goto getop;
244 			}
245 		}
246 
247 getop:		if ((op = *p++) != '+' && op != '-' && op != '=') {
248 			errno = EINVAL;
249 			goto out;
250 		}
251 		if (op == '=')
252 			equalopdone = 0;
253 
254 		who &= ~S_ISTXT;
255 		for (perm = 0, permXbits = 0;; ++p) {
256 			switch (*p) {
257 			case 'r':
258 				perm |= S_IRUSR|S_IRGRP|S_IROTH;
259 				break;
260 			case 's':
261 				/* If only "other" bits ignore set-id. */
262 				if (!who || who & ~S_IRWXO)
263 					perm |= S_ISUID|S_ISGID;
264 				break;
265 			case 't':
266 				/* If only "other" bits ignore sticky. */
267 				if (!who || who & ~S_IRWXO) {
268 					who |= S_ISTXT;
269 					perm |= S_ISTXT;
270 				}
271 				break;
272 			case 'w':
273 				perm |= S_IWUSR|S_IWGRP|S_IWOTH;
274 				break;
275 			case 'X':
276 				permXbits = S_IXUSR|S_IXGRP|S_IXOTH;
277 				break;
278 			case 'x':
279 				perm |= S_IXUSR|S_IXGRP|S_IXOTH;
280 				break;
281 			case 'u':
282 			case 'g':
283 			case 'o':
284 				/*
285 				 * When ever we hit 'u', 'g', or 'o', we have
286 				 * to flush out any partial mode that we have,
287 				 * and then do the copying of the mode bits.
288 				 */
289 				if (perm) {
290 					ADDCMD(op, who, perm, mask);
291 					perm = 0;
292 				}
293 				if (op == '=')
294 					equalopdone = 1;
295 				if (op == '+' && permXbits) {
296 					ADDCMD('X', who, permXbits, mask);
297 					permXbits = 0;
298 				}
299 				ADDCMD(*p, who, op, mask);
300 				break;
301 
302 			default:
303 				/*
304 				 * Add any permissions that we haven't already
305 				 * done.
306 				 */
307 				if (perm || (op == '=' && !equalopdone)) {
308 					if (op == '=')
309 						equalopdone = 1;
310 					ADDCMD(op, who, perm, mask);
311 					perm = 0;
312 				}
313 				if (permXbits) {
314 					ADDCMD('X', who, permXbits, mask);
315 					permXbits = 0;
316 				}
317 				goto apply;
318 			}
319 		}
320 
321 apply:		if (!*p)
322 			break;
323 		if (*p != ',')
324 			goto getop;
325 		++p;
326 	}
327 	set->cmd = 0;
328 #ifdef SETMODE_DEBUG
329 	(void)printf("Before compress_mode()\n");
330 	dumpmode(saveset);
331 #endif
332 	compress_mode(saveset);
333 #ifdef SETMODE_DEBUG
334 	(void)printf("After compress_mode()\n");
335 	dumpmode(saveset);
336 #endif
337 	return (saveset);
338 out:
339 	serrno = errno;
340 	free(saveset);
341 	errno = serrno;
342 	return NULL;
343 }
344 
345 static mode_t
346 get_current_umask(void)
347 {
348 	sigset_t sigset, sigoset;
349 	size_t len;
350 	mode_t mask;
351 	u_short smask;
352 
353 #ifdef KERN_PROC_UMASK
354 	/*
355 	 * First try requesting the umask without temporarily modifying it.
356 	 * Note that this does not work if the sysctl
357 	 * security.bsd.unprivileged_proc_debug is set to 0.
358 	 */
359 	len = sizeof(smask);
360 	if (sysctl((int[4]){ CTL_KERN, KERN_PROC, KERN_PROC_UMASK, 0 },
361 	    4, &smask, &len, NULL, 0) == 0)
362 		return (smask);
363 #endif
364 	/*
365 	 * Since it's possible that the caller is opening files inside a signal
366 	 * handler, protect them as best we can.
367 	 */
368 	sigfillset(&sigset);
369 	(void)__libc_sigprocmask(SIG_BLOCK, &sigset, &sigoset);
370 	(void)umask(mask = umask(0));
371 	(void)__libc_sigprocmask(SIG_SETMASK, &sigoset, NULL);
372 	return (mask);
373 }
374 
375 static BITCMD *
376 addcmd(BITCMD *set, mode_t op, mode_t who, mode_t oparg, mode_t mask)
377 {
378 	switch (op) {
379 	case '=':
380 		set->cmd = '-';
381 		set->bits = who ? who : STANDARD_BITS;
382 		set++;
383 
384 		op = '+';
385 		/* FALLTHROUGH */
386 	case '+':
387 	case '-':
388 	case 'X':
389 		set->cmd = op;
390 		set->bits = (who ? who : mask) & oparg;
391 		break;
392 
393 	case 'u':
394 	case 'g':
395 	case 'o':
396 		set->cmd = op;
397 		if (who) {
398 			set->cmd2 = ((who & S_IRUSR) ? CMD2_UBITS : 0) |
399 				    ((who & S_IRGRP) ? CMD2_GBITS : 0) |
400 				    ((who & S_IROTH) ? CMD2_OBITS : 0);
401 			set->bits = (mode_t)~0;
402 		} else {
403 			set->cmd2 = CMD2_UBITS | CMD2_GBITS | CMD2_OBITS;
404 			set->bits = mask;
405 		}
406 
407 		if (oparg == '+')
408 			set->cmd2 |= CMD2_SET;
409 		else if (oparg == '-')
410 			set->cmd2 |= CMD2_CLR;
411 		else if (oparg == '=')
412 			set->cmd2 |= CMD2_SET|CMD2_CLR;
413 		break;
414 	}
415 	return (set + 1);
416 }
417 
418 #ifdef SETMODE_DEBUG
419 static void
420 dumpmode(BITCMD *set)
421 {
422 	for (; set->cmd; ++set)
423 		(void)printf("cmd: '%c' bits %04o%s%s%s%s%s%s\n",
424 		    set->cmd, set->bits, set->cmd2 ? " cmd2:" : "",
425 		    set->cmd2 & CMD2_CLR ? " CLR" : "",
426 		    set->cmd2 & CMD2_SET ? " SET" : "",
427 		    set->cmd2 & CMD2_UBITS ? " UBITS" : "",
428 		    set->cmd2 & CMD2_GBITS ? " GBITS" : "",
429 		    set->cmd2 & CMD2_OBITS ? " OBITS" : "");
430 }
431 #endif
432 
433 /*
434  * Given an array of bitcmd structures, compress by compacting consecutive
435  * '+', '-' and 'X' commands into at most 3 commands, one of each.  The 'u',
436  * 'g' and 'o' commands continue to be separate.  They could probably be
437  * compacted, but it's not worth the effort.
438  */
439 static void
440 compress_mode(BITCMD *set)
441 {
442 	BITCMD *nset;
443 	int setbits, clrbits, Xbits, op;
444 
445 	for (nset = set;;) {
446 		/* Copy over any 'u', 'g' and 'o' commands. */
447 		while ((op = nset->cmd) != '+' && op != '-' && op != 'X') {
448 			*set++ = *nset++;
449 			if (!op)
450 				return;
451 		}
452 
453 		for (setbits = clrbits = Xbits = 0;; nset++) {
454 			if ((op = nset->cmd) == '-') {
455 				clrbits |= nset->bits;
456 				setbits &= ~nset->bits;
457 				Xbits &= ~nset->bits;
458 			} else if (op == '+') {
459 				setbits |= nset->bits;
460 				clrbits &= ~nset->bits;
461 				Xbits &= ~nset->bits;
462 			} else if (op == 'X')
463 				Xbits |= nset->bits & ~setbits;
464 			else
465 				break;
466 		}
467 		if (clrbits) {
468 			set->cmd = '-';
469 			set->cmd2 = 0;
470 			set->bits = clrbits;
471 			set++;
472 		}
473 		if (setbits) {
474 			set->cmd = '+';
475 			set->cmd2 = 0;
476 			set->bits = setbits;
477 			set++;
478 		}
479 		if (Xbits) {
480 			set->cmd = 'X';
481 			set->cmd2 = 0;
482 			set->bits = Xbits;
483 			set++;
484 		}
485 	}
486 }
487