1 /* 2 * Copyright (c) 1989, 1993, 1994 3 * The Regents of the University of California. All rights reserved. 4 * 5 * This code is derived from software contributed to Berkeley by 6 * Dave Borman at Cray Research, Inc. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 4. Neither the name of the University nor the names of its contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 */ 32 33 #if defined(LIBC_SCCS) && !defined(lint) 34 static char sccsid[] = "@(#)setmode.c 8.2 (Berkeley) 3/25/94"; 35 #endif /* LIBC_SCCS and not lint */ 36 #include <sys/cdefs.h> 37 __FBSDID("$FreeBSD$"); 38 39 #include "namespace.h" 40 #include <sys/types.h> 41 #include <sys/stat.h> 42 #include <sys/sysctl.h> 43 44 #include <ctype.h> 45 #include <errno.h> 46 #include <limits.h> 47 #include <signal.h> 48 #include <stddef.h> 49 #include <stdlib.h> 50 #include <unistd.h> 51 52 #ifdef SETMODE_DEBUG 53 #include <stdio.h> 54 #endif 55 #include "un-namespace.h" 56 #include "libc_private.h" 57 58 #define SET_LEN 6 /* initial # of bitcmd struct to malloc */ 59 #define SET_LEN_INCR 4 /* # of bitcmd structs to add as needed */ 60 61 typedef struct bitcmd { 62 char cmd; 63 char cmd2; 64 mode_t bits; 65 } BITCMD; 66 67 #define CMD2_CLR 0x01 68 #define CMD2_SET 0x02 69 #define CMD2_GBITS 0x04 70 #define CMD2_OBITS 0x08 71 #define CMD2_UBITS 0x10 72 73 static mode_t getumask(void); 74 static BITCMD *addcmd(BITCMD *, mode_t, mode_t, mode_t, mode_t); 75 static void compress_mode(BITCMD *); 76 #ifdef SETMODE_DEBUG 77 static void dumpmode(BITCMD *); 78 #endif 79 80 /* 81 * Given the old mode and an array of bitcmd structures, apply the operations 82 * described in the bitcmd structures to the old mode, and return the new mode. 83 * Note that there is no '=' command; a strict assignment is just a '-' (clear 84 * bits) followed by a '+' (set bits). 85 */ 86 mode_t 87 getmode(const void *bbox, mode_t omode) 88 { 89 const BITCMD *set; 90 mode_t clrval, newmode, value; 91 92 set = (const BITCMD *)bbox; 93 newmode = omode; 94 for (value = 0;; set++) 95 switch(set->cmd) { 96 /* 97 * When copying the user, group or other bits around, we "know" 98 * where the bits are in the mode so that we can do shifts to 99 * copy them around. If we don't use shifts, it gets real 100 * grundgy with lots of single bit checks and bit sets. 101 */ 102 case 'u': 103 value = (newmode & S_IRWXU) >> 6; 104 goto common; 105 106 case 'g': 107 value = (newmode & S_IRWXG) >> 3; 108 goto common; 109 110 case 'o': 111 value = newmode & S_IRWXO; 112 common: if (set->cmd2 & CMD2_CLR) { 113 clrval = 114 (set->cmd2 & CMD2_SET) ? S_IRWXO : value; 115 if (set->cmd2 & CMD2_UBITS) 116 newmode &= ~((clrval<<6) & set->bits); 117 if (set->cmd2 & CMD2_GBITS) 118 newmode &= ~((clrval<<3) & set->bits); 119 if (set->cmd2 & CMD2_OBITS) 120 newmode &= ~(clrval & set->bits); 121 } 122 if (set->cmd2 & CMD2_SET) { 123 if (set->cmd2 & CMD2_UBITS) 124 newmode |= (value<<6) & set->bits; 125 if (set->cmd2 & CMD2_GBITS) 126 newmode |= (value<<3) & set->bits; 127 if (set->cmd2 & CMD2_OBITS) 128 newmode |= value & set->bits; 129 } 130 break; 131 132 case '+': 133 newmode |= set->bits; 134 break; 135 136 case '-': 137 newmode &= ~set->bits; 138 break; 139 140 case 'X': 141 if (omode & (S_IFDIR|S_IXUSR|S_IXGRP|S_IXOTH)) 142 newmode |= set->bits; 143 break; 144 145 case '\0': 146 default: 147 #ifdef SETMODE_DEBUG 148 (void)printf("getmode:%04o -> %04o\n", omode, newmode); 149 #endif 150 return (newmode); 151 } 152 } 153 154 #define ADDCMD(a, b, c, d) \ 155 if (set >= endset) { \ 156 BITCMD *newset; \ 157 setlen += SET_LEN_INCR; \ 158 newset = realloc(saveset, sizeof(BITCMD) * setlen); \ 159 if (newset == NULL) \ 160 goto out; \ 161 set = newset + (set - saveset); \ 162 saveset = newset; \ 163 endset = newset + (setlen - 2); \ 164 } \ 165 set = addcmd(set, (mode_t)(a), (mode_t)(b), (mode_t)(c), (d)) 166 167 #define STANDARD_BITS (S_ISUID|S_ISGID|S_IRWXU|S_IRWXG|S_IRWXO) 168 169 void * 170 setmode(const char *p) 171 { 172 int serrno; 173 char op, *ep; 174 BITCMD *set, *saveset, *endset; 175 mode_t mask, perm, permXbits, who; 176 long perml; 177 int equalopdone; 178 int setlen; 179 180 if (!*p) { 181 errno = EINVAL; 182 return (NULL); 183 } 184 185 /* 186 * Get a copy of the mask for the permissions that are mask relative. 187 * Flip the bits, we want what's not set. 188 */ 189 mask = ~getumask(); 190 191 setlen = SET_LEN + 2; 192 193 if ((set = malloc((u_int)(sizeof(BITCMD) * setlen))) == NULL) 194 return (NULL); 195 saveset = set; 196 endset = set + (setlen - 2); 197 198 /* 199 * If an absolute number, get it and return; disallow non-octal digits 200 * or illegal bits. 201 */ 202 if (isdigit((unsigned char)*p)) { 203 errno = 0; 204 perml = strtol(p, &ep, 8); 205 if (*ep) { 206 errno = EINVAL; 207 goto out; 208 } 209 if (errno == ERANGE && (perml == LONG_MAX || perml == LONG_MIN)) 210 goto out; 211 if (perml & ~(STANDARD_BITS|S_ISTXT)) { 212 errno = EINVAL; 213 goto out; 214 } 215 perm = (mode_t)perml; 216 ADDCMD('=', (STANDARD_BITS|S_ISTXT), perm, mask); 217 set->cmd = 0; 218 return (saveset); 219 } 220 221 /* 222 * Build list of structures to set/clear/copy bits as described by 223 * each clause of the symbolic mode. 224 */ 225 equalopdone = 0; 226 for (;;) { 227 /* First, find out which bits might be modified. */ 228 for (who = 0;; ++p) { 229 switch (*p) { 230 case 'a': 231 who |= STANDARD_BITS; 232 break; 233 case 'u': 234 who |= S_ISUID|S_IRWXU; 235 break; 236 case 'g': 237 who |= S_ISGID|S_IRWXG; 238 break; 239 case 'o': 240 who |= S_IRWXO; 241 break; 242 default: 243 goto getop; 244 } 245 } 246 247 getop: if ((op = *p++) != '+' && op != '-' && op != '=') { 248 errno = EINVAL; 249 goto out; 250 } 251 if (op == '=') 252 equalopdone = 0; 253 254 who &= ~S_ISTXT; 255 for (perm = 0, permXbits = 0;; ++p) { 256 switch (*p) { 257 case 'r': 258 perm |= S_IRUSR|S_IRGRP|S_IROTH; 259 break; 260 case 's': 261 /* If only "other" bits ignore set-id. */ 262 if (!who || who & ~S_IRWXO) 263 perm |= S_ISUID|S_ISGID; 264 break; 265 case 't': 266 /* If only "other" bits ignore sticky. */ 267 if (!who || who & ~S_IRWXO) { 268 who |= S_ISTXT; 269 perm |= S_ISTXT; 270 } 271 break; 272 case 'w': 273 perm |= S_IWUSR|S_IWGRP|S_IWOTH; 274 break; 275 case 'X': 276 permXbits = S_IXUSR|S_IXGRP|S_IXOTH; 277 break; 278 case 'x': 279 perm |= S_IXUSR|S_IXGRP|S_IXOTH; 280 break; 281 case 'u': 282 case 'g': 283 case 'o': 284 /* 285 * When ever we hit 'u', 'g', or 'o', we have 286 * to flush out any partial mode that we have, 287 * and then do the copying of the mode bits. 288 */ 289 if (perm) { 290 ADDCMD(op, who, perm, mask); 291 perm = 0; 292 } 293 if (op == '=') 294 equalopdone = 1; 295 if (op == '+' && permXbits) { 296 ADDCMD('X', who, permXbits, mask); 297 permXbits = 0; 298 } 299 ADDCMD(*p, who, op, mask); 300 break; 301 302 default: 303 /* 304 * Add any permissions that we haven't already 305 * done. 306 */ 307 if (perm || (op == '=' && !equalopdone)) { 308 if (op == '=') 309 equalopdone = 1; 310 ADDCMD(op, who, perm, mask); 311 perm = 0; 312 } 313 if (permXbits) { 314 ADDCMD('X', who, permXbits, mask); 315 permXbits = 0; 316 } 317 goto apply; 318 } 319 } 320 321 apply: if (!*p) 322 break; 323 if (*p != ',') 324 goto getop; 325 ++p; 326 } 327 set->cmd = 0; 328 #ifdef SETMODE_DEBUG 329 (void)printf("Before compress_mode()\n"); 330 dumpmode(saveset); 331 #endif 332 compress_mode(saveset); 333 #ifdef SETMODE_DEBUG 334 (void)printf("After compress_mode()\n"); 335 dumpmode(saveset); 336 #endif 337 return (saveset); 338 out: 339 serrno = errno; 340 free(saveset); 341 errno = serrno; 342 return NULL; 343 } 344 345 static mode_t 346 getumask(void) 347 { 348 sigset_t sigset, sigoset; 349 size_t len; 350 mode_t mask; 351 u_short smask; 352 353 /* 354 * First try requesting the umask without temporarily modifying it. 355 * Note that this does not work if the sysctl 356 * security.bsd.unprivileged_proc_debug is set to 0. 357 */ 358 len = sizeof(smask); 359 if (sysctl((int[4]){ CTL_KERN, KERN_PROC, KERN_PROC_UMASK, getpid() }, 360 4, &smask, &len, NULL, 0) == 0) 361 return (smask); 362 363 /* 364 * Since it's possible that the caller is opening files inside a signal 365 * handler, protect them as best we can. 366 */ 367 sigfillset(&sigset); 368 (void)__libc_sigprocmask(SIG_BLOCK, &sigset, &sigoset); 369 (void)umask(mask = umask(0)); 370 (void)__libc_sigprocmask(SIG_SETMASK, &sigoset, NULL); 371 return (mask); 372 } 373 374 static BITCMD * 375 addcmd(BITCMD *set, mode_t op, mode_t who, mode_t oparg, mode_t mask) 376 { 377 switch (op) { 378 case '=': 379 set->cmd = '-'; 380 set->bits = who ? who : STANDARD_BITS; 381 set++; 382 383 op = '+'; 384 /* FALLTHROUGH */ 385 case '+': 386 case '-': 387 case 'X': 388 set->cmd = op; 389 set->bits = (who ? who : mask) & oparg; 390 break; 391 392 case 'u': 393 case 'g': 394 case 'o': 395 set->cmd = op; 396 if (who) { 397 set->cmd2 = ((who & S_IRUSR) ? CMD2_UBITS : 0) | 398 ((who & S_IRGRP) ? CMD2_GBITS : 0) | 399 ((who & S_IROTH) ? CMD2_OBITS : 0); 400 set->bits = (mode_t)~0; 401 } else { 402 set->cmd2 = CMD2_UBITS | CMD2_GBITS | CMD2_OBITS; 403 set->bits = mask; 404 } 405 406 if (oparg == '+') 407 set->cmd2 |= CMD2_SET; 408 else if (oparg == '-') 409 set->cmd2 |= CMD2_CLR; 410 else if (oparg == '=') 411 set->cmd2 |= CMD2_SET|CMD2_CLR; 412 break; 413 } 414 return (set + 1); 415 } 416 417 #ifdef SETMODE_DEBUG 418 static void 419 dumpmode(BITCMD *set) 420 { 421 for (; set->cmd; ++set) 422 (void)printf("cmd: '%c' bits %04o%s%s%s%s%s%s\n", 423 set->cmd, set->bits, set->cmd2 ? " cmd2:" : "", 424 set->cmd2 & CMD2_CLR ? " CLR" : "", 425 set->cmd2 & CMD2_SET ? " SET" : "", 426 set->cmd2 & CMD2_UBITS ? " UBITS" : "", 427 set->cmd2 & CMD2_GBITS ? " GBITS" : "", 428 set->cmd2 & CMD2_OBITS ? " OBITS" : ""); 429 } 430 #endif 431 432 /* 433 * Given an array of bitcmd structures, compress by compacting consecutive 434 * '+', '-' and 'X' commands into at most 3 commands, one of each. The 'u', 435 * 'g' and 'o' commands continue to be separate. They could probably be 436 * compacted, but it's not worth the effort. 437 */ 438 static void 439 compress_mode(BITCMD *set) 440 { 441 BITCMD *nset; 442 int setbits, clrbits, Xbits, op; 443 444 for (nset = set;;) { 445 /* Copy over any 'u', 'g' and 'o' commands. */ 446 while ((op = nset->cmd) != '+' && op != '-' && op != 'X') { 447 *set++ = *nset++; 448 if (!op) 449 return; 450 } 451 452 for (setbits = clrbits = Xbits = 0;; nset++) { 453 if ((op = nset->cmd) == '-') { 454 clrbits |= nset->bits; 455 setbits &= ~nset->bits; 456 Xbits &= ~nset->bits; 457 } else if (op == '+') { 458 setbits |= nset->bits; 459 clrbits &= ~nset->bits; 460 Xbits &= ~nset->bits; 461 } else if (op == 'X') 462 Xbits |= nset->bits & ~setbits; 463 else 464 break; 465 } 466 if (clrbits) { 467 set->cmd = '-'; 468 set->cmd2 = 0; 469 set->bits = clrbits; 470 set++; 471 } 472 if (setbits) { 473 set->cmd = '+'; 474 set->cmd2 = 0; 475 set->bits = setbits; 476 set++; 477 } 478 if (Xbits) { 479 set->cmd = 'X'; 480 set->cmd2 = 0; 481 set->bits = Xbits; 482 set++; 483 } 484 } 485 } 486