1 %/* 2 % * Sun RPC is a product of Sun Microsystems, Inc. and is provided for 3 % * unrestricted use provided that this legend is included on all tape 4 % * media and as a part of the software program in whole or part. Users 5 % * may copy or modify Sun RPC without charge, but are not authorized 6 % * to license or distribute it to anyone else except as part of a product or 7 % * program developed by the user. 8 % * 9 % * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE 10 % * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR 11 % * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE. 12 % * 13 % * Sun RPC is provided with no support and without any obligation on the 14 % * part of Sun Microsystems, Inc. to assist in its use, correction, 15 % * modification or enhancement. 16 % * 17 % * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE 18 % * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC 19 % * OR ANY PART THEREOF. 20 % * 21 % * In no event will Sun Microsystems, Inc. be liable for any lost revenue 22 % * or profits or other special, indirect and consequential damages, even if 23 % * Sun has been advised of the possibility of such damages. 24 % * 25 % * Sun Microsystems, Inc. 26 % * 2550 Garcia Avenue 27 % * Mountain View, California 94043 28 % */ 29 %/* 30 % * Copyright (c) 1984,1989 by Sun Microsystems, Inc. 31 % */ 32 33 %/* from pmap_prot.x */ 34 35 #ifdef RPC_HDR 36 % 37 %#pragma ident "@(#)pmap_prot.x 1.6 94/04/29 SMI" 38 %#include <sys/cdefs.h> 39 % 40 %#ifndef _KERNEL 41 % 42 #endif 43 44 /* 45 * Port Mapper Protocol Specification (in RPC Language) 46 * derived from RFC 1057 47 */ 48 49 %/* 50 % * Protocol for the local binder service, or pmap. 51 % * 52 % * Copyright (C) 1984, Sun Microsystems, Inc. 53 % * 54 % * The following procedures are supported by the protocol: 55 % * 56 % * PMAPPROC_NULL() returns () 57 % * takes nothing, returns nothing 58 % * 59 % * PMAPPROC_SET(struct pmap) returns (bool_t) 60 % * TRUE is success, FALSE is failure. Registers the tuple 61 % * [prog, vers, prot, port]. 62 % * 63 % * PMAPPROC_UNSET(struct pmap) returns (bool_t) 64 % * TRUE is success, FALSE is failure. Un-registers pair 65 % * [prog, vers]. prot and port are ignored. 66 % * 67 % * PMAPPROC_GETPORT(struct pmap) returns (long unsigned). 68 % * 0 is failure. Otherwise returns the port number where the pair 69 % * [prog, vers] is registered. It may lie! 70 % * 71 % * PMAPPROC_DUMP() RETURNS (struct pmaplist_ptr) 72 % * 73 % * PMAPPROC_CALLIT(unsigned, unsigned, unsigned, string<>) 74 % * RETURNS (port, string<>); 75 % * usage: encapsulatedresults = PMAPPROC_CALLIT(prog, vers, proc, 76 % * encapsulatedargs); 77 % * Calls the procedure on the local machine. If it is not registered, 78 % * this procedure is quite; ie it does not return error information!!! 79 % * This procedure only is supported on rpc/udp and calls via 80 % * rpc/udp. This routine only passes null authentication parameters. 81 % * This file has no interface to xdr routines for PMAPPROC_CALLIT. 82 % * 83 % * The service supports remote procedure calls on udp/ip or tcp/ip socket 111. 84 % */ 85 % 86 const PMAPPORT = 111; /* portmapper port number */ 87 % 88 % 89 %/* 90 % * A mapping of (program, version, protocol) to port number 91 % */ 92 93 struct pmap { 94 unsigned long pm_prog; 95 unsigned long pm_vers; 96 unsigned long pm_prot; 97 unsigned long pm_port; 98 }; 99 #ifdef RPC_HDR 100 % 101 %typedef pmap PMAP; 102 % 103 #endif 104 % 105 %/* 106 % * Supported values for the "prot" field 107 % */ 108 % 109 const PMAP_IPPROTO_TCP = 6; /* protocol number for TCP/IP */ 110 const PMAP_IPPROTO_UDP = 17; /* protocol number for UDP/IP */ 111 % 112 % 113 %/* 114 % * A list of mappings 115 % * 116 % * Below are two definitions for the pmaplist structure. This is done because 117 % * xdr_pmaplist() is specified to take a struct pmaplist **, rather than a 118 % * struct pmaplist * that rpcgen would produce. One version of the pmaplist 119 % * structure (actually called pm__list) is used with rpcgen, and the other is 120 % * defined only in the header file for compatibility with the specified 121 % * interface. 122 % */ 123 124 struct pm__list { 125 pmap pml_map; 126 struct pm__list *pml_next; 127 }; 128 129 typedef pm__list *pmaplist_ptr; /* results of PMAPPROC_DUMP */ 130 131 #ifdef RPC_HDR 132 % 133 %typedef struct pm__list pmaplist; 134 %typedef struct pm__list PMAPLIST; 135 % 136 %#ifndef __cplusplus 137 %struct pmaplist { 138 % PMAP pml_map; 139 % struct pmaplist *pml_next; 140 %}; 141 %#endif 142 % 143 %#ifdef __cplusplus 144 %extern "C" { 145 %#endif 146 %extern bool_t xdr_pmaplist(XDR *, pmaplist**); 147 %#ifdef __cplusplus 148 %} 149 %#endif 150 % 151 #endif 152 153 % 154 %/* 155 % * Arguments to callit 156 % */ 157 158 struct rmtcallargs { 159 unsigned long prog; 160 unsigned long vers; 161 unsigned long proc; 162 opaque args<>; 163 }; 164 #ifdef RPC_HDR 165 % 166 %/* 167 % * Client-side only representation of rmtcallargs structure. 168 % * 169 % * The routine that XDRs the rmtcallargs structure must deal with the 170 % * opaque arguments in the "args" structure. xdr_rmtcall_args() needs to be 171 % * passed the XDR routine that knows the args' structure. This routine 172 % * doesn't need to go over-the-wire (and it wouldn't make sense anyway) since 173 % * the application being called knows the args structure already. So we use a 174 % * different "XDR" structure on the client side, p_rmtcallargs, which includes 175 % * the args' XDR routine. 176 % */ 177 %struct p_rmtcallargs { 178 % u_long prog; 179 % u_long vers; 180 % u_long proc; 181 % struct { 182 % u_int args_len; 183 % char *args_val; 184 % } args; 185 % xdrproc_t xdr_args; /* encodes args */ 186 %}; 187 % 188 #endif /* def RPC_HDR */ 189 % 190 % 191 %/* 192 % * Results of callit 193 % */ 194 195 struct rmtcallres { 196 unsigned long port; 197 opaque res<>; 198 }; 199 #ifdef RPC_HDR 200 % 201 %/* 202 % * Client-side only representation of rmtcallres structure. 203 % */ 204 %struct p_rmtcallres { 205 % u_long port; 206 % struct { 207 % u_int res_len; 208 % char *res_val; 209 % } res; 210 % xdrproc_t xdr_res; /* decodes res */ 211 %}; 212 % 213 #endif /* def RPC_HDR */ 214 215 /* 216 * Port mapper procedures 217 */ 218 219 program PMAPPROG { 220 version PMAPVERS { 221 void 222 PMAPPROC_NULL(void) = 0; 223 224 bool 225 PMAPPROC_SET(pmap) = 1; 226 227 bool 228 PMAPPROC_UNSET(pmap) = 2; 229 230 unsigned long 231 PMAPPROC_GETPORT(pmap) = 3; 232 233 pmaplist_ptr 234 PMAPPROC_DUMP(void) = 4; 235 236 rmtcallres 237 PMAPPROC_CALLIT(rmtcallargs) = 5; 238 } = 2; 239 } = 100000; 240 % 241 #ifdef RPC_HDR 242 %#define PMAPVERS_PROTO ((u_long)2) 243 %#define PMAPVERS_ORIG ((u_long)1) 244 % 245 %#else /* ndef _KERNEL */ 246 % 247 %#include <rpc/pmap_rmt.h> 248 % 249 %#ifdef __cplusplus 250 %extern "C" { 251 %#endif 252 % 253 %#define PMAPPORT 111 254 % 255 %struct pmap { 256 % long unsigned pm_prog; 257 % long unsigned pm_vers; 258 % long unsigned pm_prot; 259 % long unsigned pm_port; 260 %}; 261 %typedef struct pmap PMAP; 262 %extern bool_t xdr_pmap (XDR *, struct pmap *); 263 % 264 %struct pmaplist { 265 % struct pmap pml_map; 266 % struct pmaplist *pml_next; 267 %}; 268 %typedef struct pmaplist PMAPLIST; 269 %typedef struct pmaplist *pmaplist_ptr; 270 % 271 % 272 %#ifdef __cplusplus 273 %} 274 %#endif 275 % 276 %#endif /* ndef _KERNEL */ 277 #endif 278 279