1 %/* 2 % * Sun RPC is a product of Sun Microsystems, Inc. and is provided for 3 % * unrestricted use provided that this legend is included on all tape 4 % * media and as a part of the software program in whole or part. Users 5 % * may copy or modify Sun RPC without charge, but are not authorized 6 % * to license or distribute it to anyone else except as part of a product or 7 % * program developed by the user. 8 % * 9 % * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE 10 % * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR 11 % * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE. 12 % * 13 % * Sun RPC is provided with no support and without any obligation on the 14 % * part of Sun Microsystems, Inc. to assist in its use, correction, 15 % * modification or enhancement. 16 % * 17 % * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE 18 % * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC 19 % * OR ANY PART THEREOF. 20 % * 21 % * In no event will Sun Microsystems, Inc. be liable for any lost revenue 22 % * or profits or other special, indirect and consequential damages, even if 23 % * Sun has been advised of the possibility of such damages. 24 % * 25 % * Sun Microsystems, Inc. 26 % * 2550 Garcia Avenue 27 % * Mountain View, California 94043 28 % * 29 % * $FreeBSD$ 30 % */ 31 %/* 32 % * Copyright (c) 1984,1989 by Sun Microsystems, Inc. 33 % */ 34 35 %/* from pmap_prot.x */ 36 37 #ifdef RPC_HDR 38 % 39 %#pragma ident "@(#)pmap_prot.x 1.6 94/04/29 SMI" 40 % 41 %#ifndef _KERNEL 42 % 43 #endif 44 45 /* 46 * Port Mapper Protocol Specification (in RPC Language) 47 * derived from RFC 1057 48 */ 49 50 %/* 51 % * Protocol for the local binder service, or pmap. 52 % * 53 % * Copyright (C) 1984, Sun Microsystems, Inc. 54 % * 55 % * The following procedures are supported by the protocol: 56 % * 57 % * PMAPPROC_NULL() returns () 58 % * takes nothing, returns nothing 59 % * 60 % * PMAPPROC_SET(struct pmap) returns (bool_t) 61 % * TRUE is success, FALSE is failure. Registers the tuple 62 % * [prog, vers, prot, port]. 63 % * 64 % * PMAPPROC_UNSET(struct pmap) returns (bool_t) 65 % * TRUE is success, FALSE is failure. Un-registers pair 66 % * [prog, vers]. prot and port are ignored. 67 % * 68 % * PMAPPROC_GETPORT(struct pmap) returns (long unsigned). 69 % * 0 is failure. Otherwise returns the port number where the pair 70 % * [prog, vers] is registered. It may lie! 71 % * 72 % * PMAPPROC_DUMP() RETURNS (struct pmaplist_ptr) 73 % * 74 % * PMAPPROC_CALLIT(unsigned, unsigned, unsigned, string<>) 75 % * RETURNS (port, string<>); 76 % * usage: encapsulatedresults = PMAPPROC_CALLIT(prog, vers, proc, 77 % * encapsulatedargs); 78 % * Calls the procedure on the local machine. If it is not registered, 79 % * this procedure is quite; ie it does not return error information!!! 80 % * This procedure only is supported on rpc/udp and calls via 81 % * rpc/udp. This routine only passes null authentication parameters. 82 % * This file has no interface to xdr routines for PMAPPROC_CALLIT. 83 % * 84 % * The service supports remote procedure calls on udp/ip or tcp/ip socket 111. 85 % */ 86 % 87 const PMAPPORT = 111; /* portmapper port number */ 88 % 89 % 90 %/* 91 % * A mapping of (program, version, protocol) to port number 92 % */ 93 94 struct pmap { 95 unsigned long pm_prog; 96 unsigned long pm_vers; 97 unsigned long pm_prot; 98 unsigned long pm_port; 99 }; 100 #ifdef RPC_HDR 101 % 102 %typedef pmap PMAP; 103 % 104 #endif 105 % 106 %/* 107 % * Supported values for the "prot" field 108 % */ 109 % 110 const PMAP_IPPROTO_TCP = 6; /* protocol number for TCP/IP */ 111 const PMAP_IPPROTO_UDP = 17; /* protocol number for UDP/IP */ 112 % 113 % 114 %/* 115 % * A list of mappings 116 % * 117 % * Below are two definitions for the pmaplist structure. This is done because 118 % * xdr_pmaplist() is specified to take a struct pmaplist **, rather than a 119 % * struct pmaplist * that rpcgen would produce. One version of the pmaplist 120 % * structure (actually called pm__list) is used with rpcgen, and the other is 121 % * defined only in the header file for compatibility with the specified 122 % * interface. 123 % */ 124 125 struct pm__list { 126 pmap pml_map; 127 struct pm__list *pml_next; 128 }; 129 130 typedef pm__list *pmaplist_ptr; /* results of PMAPPROC_DUMP */ 131 132 #ifdef RPC_HDR 133 % 134 %typedef struct pm__list pmaplist; 135 %typedef struct pm__list PMAPLIST; 136 % 137 %#ifndef __cplusplus 138 %struct pmaplist { 139 % PMAP pml_map; 140 % struct pmaplist *pml_next; 141 %}; 142 %#endif 143 % 144 %#ifdef __cplusplus 145 %extern "C" { 146 %#endif 147 %extern bool_t xdr_pmaplist(XDR *, pmaplist**); 148 %#ifdef __cplusplus 149 %} 150 %#endif 151 % 152 #endif 153 154 % 155 %/* 156 % * Arguments to callit 157 % */ 158 159 struct rmtcallargs { 160 unsigned long prog; 161 unsigned long vers; 162 unsigned long proc; 163 opaque args<>; 164 }; 165 #ifdef RPC_HDR 166 % 167 %/* 168 % * Client-side only representation of rmtcallargs structure. 169 % * 170 % * The routine that XDRs the rmtcallargs structure must deal with the 171 % * opaque arguments in the "args" structure. xdr_rmtcall_args() needs to be 172 % * passed the XDR routine that knows the args' structure. This routine 173 % * doesn't need to go over-the-wire (and it wouldn't make sense anyway) since 174 % * the application being called knows the args structure already. So we use a 175 % * different "XDR" structure on the client side, p_rmtcallargs, which includes 176 % * the args' XDR routine. 177 % */ 178 %struct p_rmtcallargs { 179 % u_long prog; 180 % u_long vers; 181 % u_long proc; 182 % struct { 183 % u_int args_len; 184 % char *args_val; 185 % } args; 186 % xdrproc_t xdr_args; /* encodes args */ 187 %}; 188 % 189 #endif /* def RPC_HDR */ 190 % 191 % 192 %/* 193 % * Results of callit 194 % */ 195 196 struct rmtcallres { 197 unsigned long port; 198 opaque res<>; 199 }; 200 #ifdef RPC_HDR 201 % 202 %/* 203 % * Client-side only representation of rmtcallres structure. 204 % */ 205 %struct p_rmtcallres { 206 % u_long port; 207 % struct { 208 % u_int res_len; 209 % char *res_val; 210 % } res; 211 % xdrproc_t xdr_res; /* decodes res */ 212 %}; 213 % 214 #endif /* def RPC_HDR */ 215 216 /* 217 * Port mapper procedures 218 */ 219 220 program PMAPPROG { 221 version PMAPVERS { 222 void 223 PMAPPROC_NULL(void) = 0; 224 225 bool 226 PMAPPROC_SET(pmap) = 1; 227 228 bool 229 PMAPPROC_UNSET(pmap) = 2; 230 231 unsigned long 232 PMAPPROC_GETPORT(pmap) = 3; 233 234 pmaplist_ptr 235 PMAPPROC_DUMP(void) = 4; 236 237 rmtcallres 238 PMAPPROC_CALLIT(rmtcallargs) = 5; 239 } = 2; 240 } = 100000; 241 % 242 #ifdef RPC_HDR 243 %#define PMAPVERS_PROTO ((u_long)2) 244 %#define PMAPVERS_ORIG ((u_long)1) 245 % 246 %#else /* ndef _KERNEL */ 247 % 248 %#include <rpc/pmap_rmt.h> 249 % 250 %#ifdef __cplusplus 251 %extern "C" { 252 %#endif 253 % 254 %#define PMAPPORT 111 255 % 256 %struct pmap { 257 % long unsigned pm_prog; 258 % long unsigned pm_vers; 259 % long unsigned pm_prot; 260 % long unsigned pm_port; 261 %}; 262 %typedef struct pmap PMAP; 263 %extern bool_t xdr_pmap (XDR *, struct pmap *); 264 % 265 %struct pmaplist { 266 % struct pmap pml_map; 267 % struct pmaplist *pml_next; 268 %}; 269 %typedef struct pmaplist PMAPLIST; 270 %typedef struct pmaplist *pmaplist_ptr; 271 % 272 % 273 %#ifdef __cplusplus 274 %} 275 %#endif 276 % 277 %#endif /* ndef _KERNEL */ 278 #endif 279 280