xref: /freebsd/include/rpcsvc/pmap_prot.x (revision 2e3f49888ec8851bafb22011533217487764fdb0)
1 %/*
2 % * Sun RPC is a product of Sun Microsystems, Inc. and is provided for
3 % * unrestricted use provided that this legend is included on all tape
4 % * media and as a part of the software program in whole or part.  Users
5 % * may copy or modify Sun RPC without charge, but are not authorized
6 % * to license or distribute it to anyone else except as part of a product or
7 % * program developed by the user.
8 % *
9 % * SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE
10 % * WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR
11 % * PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE.
12 % *
13 % * Sun RPC is provided with no support and without any obligation on the
14 % * part of Sun Microsystems, Inc. to assist in its use, correction,
15 % * modification or enhancement.
16 % *
17 % * SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE
18 % * INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC
19 % * OR ANY PART THEREOF.
20 % *
21 % * In no event will Sun Microsystems, Inc. be liable for any lost revenue
22 % * or profits or other special, indirect and consequential damages, even if
23 % * Sun has been advised of the possibility of such damages.
24 % *
25 % * Sun Microsystems, Inc.
26 % * 2550 Garcia Avenue
27 % * Mountain View, California  94043
28 % */
29 %/*
30 % * Copyright (c) 1984,1989 by Sun Microsystems, Inc.
31 % */
32 
33 %/* from pmap_prot.x */
34 
35 #ifdef RPC_HDR
36 %
37 %#ifndef _KERNEL
38 %
39 #endif
40 
41 /*
42  * Port Mapper Protocol Specification (in RPC Language)
43  * derived from RFC 1057
44  */
45 
46 %/*
47 % * Protocol for the local binder service, or pmap.
48 % *
49 % * Copyright (C) 1984, Sun Microsystems, Inc.
50 % *
51 % * The following procedures are supported by the protocol:
52 % *
53 % * PMAPPROC_NULL() returns ()
54 % * 	takes nothing, returns nothing
55 % *
56 % * PMAPPROC_SET(struct pmap) returns (bool_t)
57 % * 	TRUE is success, FALSE is failure.  Registers the tuple
58 % *	[prog, vers, prot, port].
59 % *
60 % * PMAPPROC_UNSET(struct pmap) returns (bool_t)
61 % *	TRUE is success, FALSE is failure.  Un-registers pair
62 % *	[prog, vers].  prot and port are ignored.
63 % *
64 % * PMAPPROC_GETPORT(struct pmap) returns (long unsigned).
65 % *	0 is failure.  Otherwise returns the port number where the pair
66 % *	[prog, vers] is registered.  It may lie!
67 % *
68 % * PMAPPROC_DUMP() RETURNS (struct pmaplist_ptr)
69 % *
70 % * PMAPPROC_CALLIT(unsigned, unsigned, unsigned, string<>)
71 % * 	RETURNS (port, string<>);
72 % * usage: encapsulatedresults = PMAPPROC_CALLIT(prog, vers, proc,
73 % *						encapsulatedargs);
74 % * 	Calls the procedure on the local machine.  If it is not registered,
75 % *	this procedure is quite; ie it does not return error information!!!
76 % *	This procedure only is supported on rpc/udp and calls via
77 % *	rpc/udp.  This routine only passes null authentication parameters.
78 % *	This file has no interface to xdr routines for PMAPPROC_CALLIT.
79 % *
80 % * The service supports remote procedure calls on udp/ip or tcp/ip socket 111.
81 % */
82 %
83 const PMAPPORT = 111;	/* portmapper port number */
84 %
85 %
86 %/*
87 % * A mapping of (program, version, protocol) to port number
88 % */
89 
90 struct pmap {
91 	unsigned long pm_prog;
92 	unsigned long pm_vers;
93 	unsigned long pm_prot;
94 	unsigned long pm_port;
95 };
96 #ifdef RPC_HDR
97 %
98 %typedef pmap PMAP;
99 %
100 #endif
101 %
102 %/*
103 % * Supported values for the "prot" field
104 % */
105 %
106 const PMAP_IPPROTO_TCP = 6;	/* protocol number for TCP/IP */
107 const PMAP_IPPROTO_UDP = 17;	/* protocol number for UDP/IP */
108 %
109 %
110 %/*
111 % * A list of mappings
112 % *
113 % * Below are two definitions for the pmaplist structure.  This is done because
114 % * xdr_pmaplist() is specified to take a struct pmaplist **, rather than a
115 % * struct pmaplist * that rpcgen would produce.  One version of the pmaplist
116 % * structure (actually called pm__list) is used with rpcgen, and the other is
117 % * defined only in the header file for compatibility with the specified
118 % * interface.
119 % */
120 
121 struct pm__list {
122 	pmap pml_map;
123 	struct pm__list *pml_next;
124 };
125 
126 typedef pm__list *pmaplist_ptr;		/* results of PMAPPROC_DUMP */
127 
128 #ifdef RPC_HDR
129 %
130 %typedef struct pm__list pmaplist;
131 %typedef struct pm__list PMAPLIST;
132 %
133 %#ifndef __cplusplus
134 %struct pmaplist {
135 %	PMAP pml_map;
136 %	struct pmaplist *pml_next;
137 %};
138 %#endif
139 %
140 %#ifdef __cplusplus
141 %extern "C" {
142 %#endif
143 %extern  bool_t xdr_pmaplist(XDR *, pmaplist**);
144 %#ifdef	__cplusplus
145 %}
146 %#endif
147 %
148 #endif
149 
150 %
151 %/*
152 % * Arguments to callit
153 % */
154 
155 struct rmtcallargs {
156 	unsigned long prog;
157 	unsigned long vers;
158 	unsigned long proc;
159 	opaque args<>;
160 };
161 #ifdef RPC_HDR
162 %
163 %/*
164 % * Client-side only representation of rmtcallargs structure.
165 % *
166 % * The routine that XDRs the rmtcallargs structure must deal with the
167 % * opaque arguments in the "args" structure.  xdr_rmtcall_args() needs to be
168 % * passed the XDR routine that knows the args' structure.  This routine
169 % * doesn't need to go over-the-wire (and it wouldn't make sense anyway) since
170 % * the application being called knows the args structure already.  So we use a
171 % * different "XDR" structure on the client side, p_rmtcallargs, which includes
172 % * the args' XDR routine.
173 % */
174 %struct p_rmtcallargs {
175 %	u_long prog;
176 %	u_long vers;
177 %	u_long proc;
178 %	struct {
179 %		u_int args_len;
180 %		char *args_val;
181 %	} args;
182 %	xdrproc_t	xdr_args;	/* encodes args */
183 %};
184 %
185 #endif	/* def RPC_HDR */
186 %
187 %
188 %/*
189 % * Results of callit
190 % */
191 
192 struct rmtcallres {
193 	unsigned long port;
194 	opaque res<>;
195 };
196 #ifdef RPC_HDR
197 %
198 %/*
199 % * Client-side only representation of rmtcallres structure.
200 % */
201 %struct p_rmtcallres {
202 %	u_long port;
203 %	struct {
204 %		u_int res_len;
205 %		char *res_val;
206 %	} res;
207 %	xdrproc_t	xdr_res;	/* decodes res */
208 %};
209 %
210 #endif	/* def RPC_HDR */
211 
212 /*
213  * Port mapper procedures
214  */
215 
216 program PMAPPROG {
217    version PMAPVERS {
218 	void
219 	PMAPPROC_NULL(void)	= 0;
220 
221 	bool
222 	PMAPPROC_SET(pmap)	= 1;
223 
224 	bool
225 	PMAPPROC_UNSET(pmap)	= 2;
226 
227 	unsigned long
228 	PMAPPROC_GETPORT(pmap)	= 3;
229 
230 	pmaplist_ptr
231 	PMAPPROC_DUMP(void)	= 4;
232 
233 	rmtcallres
234 	PMAPPROC_CALLIT(rmtcallargs)  = 5;
235    } = 2;
236 } = 100000;
237 %
238 #ifdef RPC_HDR
239 %#define PMAPVERS_PROTO		((u_long)2)
240 %#define PMAPVERS_ORIG		((u_long)1)
241 %
242 %#else		/* ndef _KERNEL */
243 %
244 %#include <rpc/pmap_rmt.h>
245 %
246 %#ifdef __cplusplus
247 %extern "C" {
248 %#endif
249 %
250 %#define	PMAPPORT 111
251 %
252 %struct pmap {
253 %	long unsigned pm_prog;
254 %	long unsigned pm_vers;
255 %	long unsigned pm_prot;
256 %	long unsigned pm_port;
257 %};
258 %typedef struct pmap PMAP;
259 %extern bool_t xdr_pmap (XDR *, struct pmap *);
260 %
261 %struct pmaplist {
262 %	struct pmap pml_map;
263 %	struct pmaplist *pml_next;
264 %};
265 %typedef struct pmaplist PMAPLIST;
266 %typedef struct pmaplist *pmaplist_ptr;
267 %
268 %
269 %#ifdef __cplusplus
270 %}
271 %#endif
272 %
273 %#endif		/* ndef _KERNEL */
274 #endif
275 
276