1 %/*- 2 % * Copyright (c) 2009, Sun Microsystems, Inc. 3 % * All rights reserved. 4 % * 5 % * Redistribution and use in source and binary forms, with or without 6 % * modification, are permitted provided that the following conditions are met: 7 % * - Redistributions of source code must retain the above copyright notice, 8 % * this list of conditions and the following disclaimer. 9 % * - Redistributions in binary form must reproduce the above copyright notice, 10 % * this list of conditions and the following disclaimer in the documentation 11 % * and/or other materials provided with the distribution. 12 % * - Neither the name of Sun Microsystems, Inc. nor the names of its 13 % * contributors may be used to endorse or promote products derived 14 % * from this software without specific prior written permission. 15 % * 16 % * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 17 % * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 % * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 % * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE 20 % * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 21 % * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 22 % * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 23 % * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 24 % * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 25 % * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 26 % * POSSIBILITY OF SUCH DAMAGE. 27 % */ 28 %/* 29 % * Copyright (c) 1988 by Sun Microsystems, Inc. 30 % */ 31 32 %/* from rpcb_prot.x */ 33 34 #ifdef RPC_HDR 35 % 36 %#ifndef _KERNEL 37 % 38 #endif 39 40 /* 41 * rpcb_prot.x 42 * rpcbind protocol, versions 3 and 4, in RPC Language 43 */ 44 % 45 %/* 46 % * The following procedures are supported by the protocol in version 3: 47 % * 48 % * RPCBPROC_NULL() returns () 49 % * takes nothing, returns nothing 50 % * 51 % * RPCBPROC_SET(rpcb) returns (bool_t) 52 % * TRUE is success, FALSE is failure. Registers the tuple 53 % * [prog, vers, address, owner, netid]. 54 % * Finds out owner and netid information on its own. 55 % * 56 % * RPCBPROC_UNSET(rpcb) returns (bool_t) 57 % * TRUE is success, FALSE is failure. Un-registers tuple 58 % * [prog, vers, netid]. addresses is ignored. 59 % * If netid is NULL, unregister all. 60 % * 61 % * RPCBPROC_GETADDR(rpcb) returns (string). 62 % * 0 is failure. Otherwise returns the universal address where the 63 % * triple [prog, vers, netid] is registered. Ignore address and owner. 64 % * 65 % * RPCBPROC_DUMP() RETURNS (rpcblist_ptr) 66 % * used to dump the entire rpcbind maps 67 % * 68 % * RPCBPROC_CALLIT(rpcb_rmtcallargs) 69 % * RETURNS (rpcb_rmtcallres); 70 % * Calls the procedure on the remote machine. If it is not registered, 71 % * this procedure is quiet; i.e. it does not return error information!!! 72 % * This routine only passes null authentication parameters. 73 % * It has no interface to xdr routines for RPCBPROC_CALLIT. 74 % * 75 % * RPCBPROC_GETTIME() returns (int). 76 % * Gets the remote machines time 77 % * 78 % * RPCBPROC_UADDR2TADDR(strint) RETURNS (struct netbuf) 79 % * Returns the netbuf address from universal address. 80 % * 81 % * RPCBPROC_TADDR2UADDR(struct netbuf) RETURNS (string) 82 % * Returns the universal address from netbuf address. 83 % * 84 % * END OF RPCBIND VERSION 3 PROCEDURES 85 % */ 86 %/* 87 % * Except for RPCBPROC_CALLIT, the procedures above are carried over to 88 % * rpcbind version 4. Those below are added or modified for version 4. 89 % * NOTE: RPCBPROC_BCAST HAS THE SAME FUNCTIONALITY AND PROCEDURE NUMBER 90 % * AS RPCBPROC_CALLIT. 91 % * 92 % * RPCBPROC_BCAST(rpcb_rmtcallargs) 93 % * RETURNS (rpcb_rmtcallres); 94 % * Calls the procedure on the remote machine. If it is not registered, 95 % * this procedure IS quiet; i.e. it DOES NOT return error information!!! 96 % * This routine should be used for broadcasting and nothing else. 97 % * 98 % * RPCBPROC_GETVERSADDR(rpcb) returns (string). 99 % * 0 is failure. Otherwise returns the universal address where the 100 % * triple [prog, vers, netid] is registered. Ignore address and owner. 101 % * Same as RPCBPROC_GETADDR except that if the given version number 102 % * is not available, the address is not returned. 103 % * 104 % * RPCBPROC_INDIRECT(rpcb_rmtcallargs) 105 % * RETURNS (rpcb_rmtcallres); 106 % * Calls the procedure on the remote machine. If it is not registered, 107 % * this procedure is NOT quiet; i.e. it DOES return error information!!! 108 % * as any normal application would expect. 109 % * 110 % * RPCBPROC_GETADDRLIST(rpcb) returns (rpcb_entry_list_ptr). 111 % * Same as RPCBPROC_GETADDR except that it returns a list of all the 112 % * addresses registered for the combination (prog, vers) (for all 113 % * transports). 114 % * 115 % * RPCBPROC_GETSTAT(void) returns (rpcb_stat_byvers) 116 % * Returns the statistics about the kind of requests received by rpcbind. 117 % */ 118 % 119 %/* 120 % * A mapping of (program, version, network ID) to address 121 % */ 122 struct rpcb { 123 rpcprog_t r_prog; /* program number */ 124 rpcvers_t r_vers; /* version number */ 125 string r_netid<>; /* network id */ 126 string r_addr<>; /* universal address */ 127 string r_owner<>; /* owner of this service */ 128 }; 129 #ifdef RPC_HDR 130 % 131 %typedef rpcb RPCB; 132 % 133 #endif 134 % 135 %/* 136 % * A list of mappings 137 % * 138 % * Below are two definitions for the rpcblist structure. This is done because 139 % * xdr_rpcblist() is specified to take a struct rpcblist **, rather than a 140 % * struct rpcblist * that rpcgen would produce. One version of the rpcblist 141 % * structure (actually called rp__list) is used with rpcgen, and the other is 142 % * defined only in the header file for compatibility with the specified 143 % * interface. 144 % */ 145 146 struct rp__list { 147 rpcb rpcb_map; 148 struct rp__list *rpcb_next; 149 }; 150 151 typedef rp__list *rpcblist_ptr; /* results of RPCBPROC_DUMP */ 152 153 #ifdef RPC_HDR 154 % 155 %typedef struct rp__list rpcblist; 156 %typedef struct rp__list RPCBLIST; 157 % 158 %#ifndef __cplusplus 159 %struct rpcblist { 160 % RPCB rpcb_map; 161 % struct rpcblist *rpcb_next; 162 %}; 163 %#endif 164 % 165 %#ifdef __cplusplus 166 %extern "C" { 167 %#endif 168 %extern bool_t xdr_rpcblist(XDR *, rpcblist**); 169 %#ifdef __cplusplus 170 %} 171 %#endif 172 % 173 #endif 174 175 % 176 %/* 177 % * Arguments of remote calls 178 % */ 179 struct rpcb_rmtcallargs { 180 rpcprog_t prog; /* program number */ 181 rpcvers_t vers; /* version number */ 182 rpcproc_t proc; /* procedure number */ 183 opaque args<>; /* argument */ 184 }; 185 #ifdef RPC_HDR 186 % 187 %/* 188 % * Client-side only representation of rpcb_rmtcallargs structure. 189 % * 190 % * The routine that XDRs the rpcb_rmtcallargs structure must deal with the 191 % * opaque arguments in the "args" structure. xdr_rpcb_rmtcallargs() needs to 192 % * be passed the XDR routine that knows the args' structure. This routine 193 % * doesn't need to go over-the-wire (and it wouldn't make sense anyway) since 194 % * the application being called already knows the args structure. So we use a 195 % * different "XDR" structure on the client side, r_rpcb_rmtcallargs, which 196 % * includes the args' XDR routine. 197 % */ 198 %struct r_rpcb_rmtcallargs { 199 % rpcprog_t prog; 200 % rpcvers_t vers; 201 % rpcproc_t proc; 202 % struct { 203 % u_int args_len; 204 % char *args_val; 205 % } args; 206 % xdrproc_t xdr_args; /* encodes args */ 207 %}; 208 % 209 #endif /* def RPC_HDR */ 210 % 211 %/* 212 % * Results of the remote call 213 % */ 214 struct rpcb_rmtcallres { 215 string addr<>; /* remote universal address */ 216 opaque results<>; /* result */ 217 }; 218 #ifdef RPC_HDR 219 % 220 %/* 221 % * Client-side only representation of rpcb_rmtcallres structure. 222 % */ 223 %struct r_rpcb_rmtcallres { 224 % char *addr; 225 % struct { 226 % u_int32_t results_len; 227 % char *results_val; 228 % } results; 229 % xdrproc_t xdr_res; /* decodes results */ 230 %}; 231 #endif /* RPC_HDR */ 232 % 233 %/* 234 % * rpcb_entry contains a merged address of a service on a particular 235 % * transport, plus associated netconfig information. A list of rpcb_entrys 236 % * is returned by RPCBPROC_GETADDRLIST. See netconfig.h for values used 237 % * in r_nc_* fields. 238 % */ 239 struct rpcb_entry { 240 string r_maddr<>; /* merged address of service */ 241 string r_nc_netid<>; /* netid field */ 242 unsigned int r_nc_semantics; /* semantics of transport */ 243 string r_nc_protofmly<>; /* protocol family */ 244 string r_nc_proto<>; /* protocol name */ 245 }; 246 % 247 %/* 248 % * A list of addresses supported by a service. 249 % */ 250 struct rpcb_entry_list { 251 rpcb_entry rpcb_entry_map; 252 struct rpcb_entry_list *rpcb_entry_next; 253 }; 254 255 typedef rpcb_entry_list *rpcb_entry_list_ptr; 256 257 % 258 %/* 259 % * rpcbind statistics 260 % */ 261 % 262 const rpcb_highproc_2 = RPCBPROC_CALLIT; 263 const rpcb_highproc_3 = RPCBPROC_TADDR2UADDR; 264 const rpcb_highproc_4 = RPCBPROC_GETSTAT; 265 266 const RPCBSTAT_HIGHPROC = 13; /* # of procs in rpcbind V4 plus one */ 267 const RPCBVERS_STAT = 3; /* provide only for rpcbind V2, V3 and V4 */ 268 const RPCBVERS_4_STAT = 2; 269 const RPCBVERS_3_STAT = 1; 270 const RPCBVERS_2_STAT = 0; 271 % 272 %/* Link list of all the stats about getport and getaddr */ 273 struct rpcbs_addrlist { 274 rpcprog_t prog; 275 rpcvers_t vers; 276 int success; 277 int failure; 278 string netid<>; 279 struct rpcbs_addrlist *next; 280 }; 281 % 282 %/* Link list of all the stats about rmtcall */ 283 struct rpcbs_rmtcalllist { 284 rpcprog_t prog; 285 rpcvers_t vers; 286 rpcproc_t proc; 287 int success; 288 int failure; 289 int indirect; /* whether callit or indirect */ 290 string netid<>; 291 struct rpcbs_rmtcalllist *next; 292 }; 293 294 typedef int rpcbs_proc[RPCBSTAT_HIGHPROC]; 295 typedef rpcbs_addrlist *rpcbs_addrlist_ptr; 296 typedef rpcbs_rmtcalllist *rpcbs_rmtcalllist_ptr; 297 298 struct rpcb_stat { 299 rpcbs_proc info; 300 int setinfo; 301 int unsetinfo; 302 rpcbs_addrlist_ptr addrinfo; 303 rpcbs_rmtcalllist_ptr rmtinfo; 304 }; 305 % 306 %/* 307 % * One rpcb_stat structure is returned for each version of rpcbind 308 % * being monitored. 309 % */ 310 311 typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT]; 312 313 #ifdef RPC_HDR 314 % 315 %/* 316 % * We don't define netbuf in RPCL, since it would contain structure member 317 % * names that would conflict with the definition of struct netbuf in 318 % * <tiuser.h>. Instead we merely declare the XDR routine xdr_netbuf() here, 319 % * and implement it ourselves in rpc/rpcb_prot.c. 320 % */ 321 %#ifdef __cplusplus 322 %extern "C" bool_t xdr_netbuf(XDR *, struct netbuf *); 323 % 324 %#else /* __STDC__ */ 325 %extern bool_t xdr_netbuf(XDR *, struct netbuf *); 326 % 327 %#endif 328 #endif /* def RPC_HDR */ 329 330 /* 331 * rpcbind procedures 332 */ 333 program RPCBPROG { 334 version RPCBVERS { 335 bool 336 RPCBPROC_SET(rpcb) = 1; 337 338 bool 339 RPCBPROC_UNSET(rpcb) = 2; 340 341 string 342 RPCBPROC_GETADDR(rpcb) = 3; 343 344 rpcblist_ptr 345 RPCBPROC_DUMP(void) = 4; 346 347 rpcb_rmtcallres 348 RPCBPROC_CALLIT(rpcb_rmtcallargs) = 5; 349 350 unsigned int 351 RPCBPROC_GETTIME(void) = 6; 352 353 struct netbuf 354 RPCBPROC_UADDR2TADDR(string) = 7; 355 356 string 357 RPCBPROC_TADDR2UADDR(struct netbuf) = 8; 358 } = 3; 359 360 version RPCBVERS4 { 361 bool 362 RPCBPROC_SET(rpcb) = 1; 363 364 bool 365 RPCBPROC_UNSET(rpcb) = 2; 366 367 string 368 RPCBPROC_GETADDR(rpcb) = 3; 369 370 rpcblist_ptr 371 RPCBPROC_DUMP(void) = 4; 372 373 /* 374 * NOTE: RPCBPROC_BCAST has the same functionality as CALLIT; 375 * the new name is intended to indicate that this 376 * procedure should be used for broadcast RPC, and 377 * RPCBPROC_INDIRECT should be used for indirect calls. 378 */ 379 rpcb_rmtcallres 380 RPCBPROC_BCAST(rpcb_rmtcallargs) = RPCBPROC_CALLIT; 381 382 unsigned int 383 RPCBPROC_GETTIME(void) = 6; 384 385 struct netbuf 386 RPCBPROC_UADDR2TADDR(string) = 7; 387 388 string 389 RPCBPROC_TADDR2UADDR(struct netbuf) = 8; 390 391 string 392 RPCBPROC_GETVERSADDR(rpcb) = 9; 393 394 rpcb_rmtcallres 395 RPCBPROC_INDIRECT(rpcb_rmtcallargs) = 10; 396 397 rpcb_entry_list_ptr 398 RPCBPROC_GETADDRLIST(rpcb) = 11; 399 400 rpcb_stat_byvers 401 RPCBPROC_GETSTAT(void) = 12; 402 } = 4; 403 } = 100000; 404 #ifdef RPC_HDR 405 % 406 %#define RPCBVERS_3 RPCBVERS 407 %#define RPCBVERS_4 RPCBVERS4 408 % 409 %#define _PATH_RPCBINDSOCK "/var/run/rpcbind.sock" 410 % 411 %#else /* ndef _KERNEL */ 412 %#ifdef __cplusplus 413 %extern "C" { 414 %#endif 415 % 416 %/* 417 % * A mapping of (program, version, network ID) to address 418 % */ 419 %struct rpcb { 420 % rpcprog_t r_prog; /* program number */ 421 % rpcvers_t r_vers; /* version number */ 422 % char *r_netid; /* network id */ 423 % char *r_addr; /* universal address */ 424 % char *r_owner; /* owner of the mapping */ 425 %}; 426 %typedef struct rpcb RPCB; 427 % 428 %/* 429 % * A list of mappings 430 % */ 431 %struct rpcblist { 432 % RPCB rpcb_map; 433 % struct rpcblist *rpcb_next; 434 %}; 435 %typedef struct rpcblist RPCBLIST; 436 %typedef struct rpcblist *rpcblist_ptr; 437 % 438 %/* 439 % * Remote calls arguments 440 % */ 441 %struct rpcb_rmtcallargs { 442 % rpcprog_t prog; /* program number */ 443 % rpcvers_t vers; /* version number */ 444 % rpcproc_t proc; /* procedure number */ 445 % u_int32_t arglen; /* arg len */ 446 % caddr_t args_ptr; /* argument */ 447 % xdrproc_t xdr_args; /* XDR routine for argument */ 448 %}; 449 %typedef struct rpcb_rmtcallargs rpcb_rmtcallargs; 450 % 451 %/* 452 % * Remote calls results 453 % */ 454 %struct rpcb_rmtcallres { 455 % char *addr_ptr; /* remote universal address */ 456 % u_int32_t resultslen; /* results length */ 457 % caddr_t results_ptr; /* results */ 458 % xdrproc_t xdr_results; /* XDR routine for result */ 459 %}; 460 %typedef struct rpcb_rmtcallres rpcb_rmtcallres; 461 % 462 %struct rpcb_entry { 463 % char *r_maddr; 464 % char *r_nc_netid; 465 % unsigned int r_nc_semantics; 466 % char *r_nc_protofmly; 467 % char *r_nc_proto; 468 %}; 469 %typedef struct rpcb_entry rpcb_entry; 470 % 471 %/* 472 % * A list of addresses supported by a service. 473 % */ 474 % 475 %struct rpcb_entry_list { 476 % rpcb_entry rpcb_entry_map; 477 % struct rpcb_entry_list *rpcb_entry_next; 478 %}; 479 %typedef struct rpcb_entry_list rpcb_entry_list; 480 % 481 %typedef rpcb_entry_list *rpcb_entry_list_ptr; 482 % 483 %/* 484 % * rpcbind statistics 485 % */ 486 % 487 %#define rpcb_highproc_2 RPCBPROC_CALLIT 488 %#define rpcb_highproc_3 RPCBPROC_TADDR2UADDR 489 %#define rpcb_highproc_4 RPCBPROC_GETSTAT 490 %#define RPCBSTAT_HIGHPROC 13 491 %#define RPCBVERS_STAT 3 492 %#define RPCBVERS_4_STAT 2 493 %#define RPCBVERS_3_STAT 1 494 %#define RPCBVERS_2_STAT 0 495 % 496 %/* Link list of all the stats about getport and getaddr */ 497 % 498 %struct rpcbs_addrlist { 499 % rpcprog_t prog; 500 % rpcvers_t vers; 501 % int success; 502 % int failure; 503 % char *netid; 504 % struct rpcbs_addrlist *next; 505 %}; 506 %typedef struct rpcbs_addrlist rpcbs_addrlist; 507 % 508 %/* Link list of all the stats about rmtcall */ 509 % 510 %struct rpcbs_rmtcalllist { 511 % rpcprog_t prog; 512 % rpcvers_t vers; 513 % rpcproc_t proc; 514 % int success; 515 % int failure; 516 % int indirect; 517 % char *netid; 518 % struct rpcbs_rmtcalllist *next; 519 %}; 520 %typedef struct rpcbs_rmtcalllist rpcbs_rmtcalllist; 521 % 522 %typedef int rpcbs_proc[RPCBSTAT_HIGHPROC]; 523 % 524 %typedef rpcbs_addrlist *rpcbs_addrlist_ptr; 525 % 526 %typedef rpcbs_rmtcalllist *rpcbs_rmtcalllist_ptr; 527 % 528 %struct rpcb_stat { 529 % rpcbs_proc info; 530 % int setinfo; 531 % int unsetinfo; 532 % rpcbs_addrlist_ptr addrinfo; 533 % rpcbs_rmtcalllist_ptr rmtinfo; 534 %}; 535 %typedef struct rpcb_stat rpcb_stat; 536 % 537 %/* 538 % * One rpcb_stat structure is returned for each version of rpcbind 539 % * being monitored. 540 % */ 541 % 542 %typedef rpcb_stat rpcb_stat_byvers[RPCBVERS_STAT]; 543 % 544 %#ifdef __cplusplus 545 %} 546 %#endif 547 % 548 %#endif /* ndef _KERNEL */ 549 #endif /* RPC_HDR */ 550