1 /* 2 * Copyright 1995-2018 The OpenSSL Project Authors. All Rights Reserved. 3 * 4 * Licensed under the OpenSSL license (the "License"). You may not use 5 * this file except in compliance with the License. You can obtain a copy 6 * in the file LICENSE in the source distribution or at 7 * https://www.openssl.org/source/license.html 8 */ 9 10 /***************************************************************************** 11 * * 12 * These structures should be considered PRIVATE to the record layer. No * 13 * non-record layer code should be using these structures in any way. * 14 * * 15 *****************************************************************************/ 16 17 typedef struct ssl3_buffer_st { 18 /* at least SSL3_RT_MAX_PACKET_SIZE bytes, see ssl3_setup_buffers() */ 19 unsigned char *buf; 20 /* default buffer size (or 0 if no default set) */ 21 size_t default_len; 22 /* buffer size */ 23 size_t len; 24 /* where to 'copy from' */ 25 size_t offset; 26 /* how many bytes left */ 27 size_t left; 28 } SSL3_BUFFER; 29 30 #define SEQ_NUM_SIZE 8 31 32 typedef struct ssl3_record_st { 33 /* Record layer version */ 34 /* r */ 35 int rec_version; 36 /* type of record */ 37 /* r */ 38 int type; 39 /* How many bytes available */ 40 /* rw */ 41 size_t length; 42 /* 43 * How many bytes were available before padding was removed? This is used 44 * to implement the MAC check in constant time for CBC records. 45 */ 46 /* rw */ 47 size_t orig_len; 48 /* read/write offset into 'buf' */ 49 /* r */ 50 size_t off; 51 /* pointer to the record data */ 52 /* rw */ 53 unsigned char *data; 54 /* where the decode bytes are */ 55 /* rw */ 56 unsigned char *input; 57 /* only used with decompression - malloc()ed */ 58 /* r */ 59 unsigned char *comp; 60 /* Whether the data from this record has already been read or not */ 61 /* r */ 62 unsigned int read; 63 /* epoch number, needed by DTLS1 */ 64 /* r */ 65 unsigned long epoch; 66 /* sequence number, needed by DTLS1 */ 67 /* r */ 68 unsigned char seq_num[SEQ_NUM_SIZE]; 69 } SSL3_RECORD; 70 71 typedef struct dtls1_bitmap_st { 72 /* Track 32 packets on 32-bit systems and 64 - on 64-bit systems */ 73 unsigned long map; 74 /* Max record number seen so far, 64-bit value in big-endian encoding */ 75 unsigned char max_seq_num[SEQ_NUM_SIZE]; 76 } DTLS1_BITMAP; 77 78 typedef struct record_pqueue_st { 79 unsigned short epoch; 80 struct pqueue_st *q; 81 } record_pqueue; 82 83 typedef struct dtls1_record_data_st { 84 unsigned char *packet; 85 size_t packet_length; 86 SSL3_BUFFER rbuf; 87 SSL3_RECORD rrec; 88 #ifndef OPENSSL_NO_SCTP 89 struct bio_dgram_sctp_rcvinfo recordinfo; 90 #endif 91 } DTLS1_RECORD_DATA; 92 93 typedef struct dtls_record_layer_st { 94 /* 95 * The current data and handshake epoch. This is initially 96 * undefined, and starts at zero once the initial handshake is 97 * completed 98 */ 99 unsigned short r_epoch; 100 unsigned short w_epoch; 101 /* records being received in the current epoch */ 102 DTLS1_BITMAP bitmap; 103 /* renegotiation starts a new set of sequence numbers */ 104 DTLS1_BITMAP next_bitmap; 105 /* Received handshake records (processed and unprocessed) */ 106 record_pqueue unprocessed_rcds; 107 record_pqueue processed_rcds; 108 /* 109 * Buffered application records. Only for records between CCS and 110 * Finished to prevent either protocol violation or unnecessary message 111 * loss. 112 */ 113 record_pqueue buffered_app_data; 114 /* save last and current sequence numbers for retransmissions */ 115 unsigned char last_write_sequence[8]; 116 unsigned char curr_write_sequence[8]; 117 } DTLS_RECORD_LAYER; 118 119 /***************************************************************************** 120 * * 121 * This structure should be considered "opaque" to anything outside of the * 122 * record layer. No non-record layer code should be accessing the members of * 123 * this structure. * 124 * * 125 *****************************************************************************/ 126 127 typedef struct record_layer_st { 128 /* The parent SSL structure */ 129 SSL *s; 130 /* 131 * Read as many input bytes as possible (for 132 * non-blocking reads) 133 */ 134 int read_ahead; 135 /* where we are when reading */ 136 int rstate; 137 /* How many pipelines can be used to read data */ 138 size_t numrpipes; 139 /* How many pipelines can be used to write data */ 140 size_t numwpipes; 141 /* read IO goes into here */ 142 SSL3_BUFFER rbuf; 143 /* write IO goes into here */ 144 SSL3_BUFFER wbuf[SSL_MAX_PIPELINES]; 145 /* each decoded record goes in here */ 146 SSL3_RECORD rrec[SSL_MAX_PIPELINES]; 147 /* used internally to point at a raw packet */ 148 unsigned char *packet; 149 size_t packet_length; 150 /* number of bytes sent so far */ 151 size_t wnum; 152 unsigned char handshake_fragment[4]; 153 size_t handshake_fragment_len; 154 /* The number of consecutive empty records we have received */ 155 size_t empty_record_count; 156 /* partial write - check the numbers match */ 157 /* number bytes written */ 158 size_t wpend_tot; 159 int wpend_type; 160 /* number of bytes submitted */ 161 size_t wpend_ret; 162 const unsigned char *wpend_buf; 163 unsigned char read_sequence[SEQ_NUM_SIZE]; 164 unsigned char write_sequence[SEQ_NUM_SIZE]; 165 /* Set to true if this is the first record in a connection */ 166 unsigned int is_first_record; 167 /* Count of the number of consecutive warning alerts received */ 168 unsigned int alert_count; 169 DTLS_RECORD_LAYER *d; 170 } RECORD_LAYER; 171 172 /***************************************************************************** 173 * * 174 * The following macros/functions represent the libssl internal API to the * 175 * record layer. Any libssl code may call these functions/macros * 176 * * 177 *****************************************************************************/ 178 179 #define MIN_SSL2_RECORD_LEN 9 180 181 #define RECORD_LAYER_set_read_ahead(rl, ra) ((rl)->read_ahead = (ra)) 182 #define RECORD_LAYER_get_read_ahead(rl) ((rl)->read_ahead) 183 #define RECORD_LAYER_get_packet(rl) ((rl)->packet) 184 #define RECORD_LAYER_get_packet_length(rl) ((rl)->packet_length) 185 #define RECORD_LAYER_add_packet_length(rl, inc) ((rl)->packet_length += (inc)) 186 #define DTLS_RECORD_LAYER_get_w_epoch(rl) ((rl)->d->w_epoch) 187 #define DTLS_RECORD_LAYER_get_processed_rcds(rl) \ 188 ((rl)->d->processed_rcds) 189 #define DTLS_RECORD_LAYER_get_unprocessed_rcds(rl) \ 190 ((rl)->d->unprocessed_rcds) 191 #define RECORD_LAYER_get_rbuf(rl) (&(rl)->rbuf) 192 #define RECORD_LAYER_get_wbuf(rl) ((rl)->wbuf) 193 194 void RECORD_LAYER_init(RECORD_LAYER *rl, SSL *s); 195 void RECORD_LAYER_clear(RECORD_LAYER *rl); 196 void RECORD_LAYER_release(RECORD_LAYER *rl); 197 int RECORD_LAYER_read_pending(const RECORD_LAYER *rl); 198 int RECORD_LAYER_processed_read_pending(const RECORD_LAYER *rl); 199 int RECORD_LAYER_write_pending(const RECORD_LAYER *rl); 200 void RECORD_LAYER_reset_read_sequence(RECORD_LAYER *rl); 201 void RECORD_LAYER_reset_write_sequence(RECORD_LAYER *rl); 202 int RECORD_LAYER_is_sslv2_record(RECORD_LAYER *rl); 203 size_t RECORD_LAYER_get_rrec_length(RECORD_LAYER *rl); 204 __owur size_t ssl3_pending(const SSL *s); 205 __owur int ssl3_write_bytes(SSL *s, int type, const void *buf, size_t len, 206 size_t *written); 207 int do_ssl3_write(SSL *s, int type, const unsigned char *buf, 208 size_t *pipelens, size_t numpipes, 209 int create_empty_fragment, size_t *written); 210 __owur int ssl3_read_bytes(SSL *s, int type, int *recvd_type, 211 unsigned char *buf, size_t len, int peek, 212 size_t *readbytes); 213 __owur int ssl3_setup_buffers(SSL *s); 214 __owur int ssl3_enc(SSL *s, SSL3_RECORD *inrecs, size_t n_recs, int send); 215 __owur int n_ssl3_mac(SSL *ssl, SSL3_RECORD *rec, unsigned char *md, int send); 216 __owur int ssl3_write_pending(SSL *s, int type, const unsigned char *buf, size_t len, 217 size_t *written); 218 __owur int tls1_enc(SSL *s, SSL3_RECORD *recs, size_t n_recs, int send); 219 __owur int tls1_mac(SSL *ssl, SSL3_RECORD *rec, unsigned char *md, int send); 220 __owur int tls13_enc(SSL *s, SSL3_RECORD *recs, size_t n_recs, int send); 221 int DTLS_RECORD_LAYER_new(RECORD_LAYER *rl); 222 void DTLS_RECORD_LAYER_free(RECORD_LAYER *rl); 223 void DTLS_RECORD_LAYER_clear(RECORD_LAYER *rl); 224 void DTLS_RECORD_LAYER_set_saved_w_epoch(RECORD_LAYER *rl, unsigned short e); 225 void DTLS_RECORD_LAYER_clear(RECORD_LAYER *rl); 226 void DTLS_RECORD_LAYER_set_write_sequence(RECORD_LAYER *rl, unsigned char *seq); 227 __owur int dtls1_read_bytes(SSL *s, int type, int *recvd_type, 228 unsigned char *buf, size_t len, int peek, 229 size_t *readbytes); 230 __owur int dtls1_write_bytes(SSL *s, int type, const void *buf, size_t len, 231 size_t *written); 232 int do_dtls1_write(SSL *s, int type, const unsigned char *buf, 233 size_t len, int create_empty_fragment, size_t *written); 234 void dtls1_reset_seq_numbers(SSL *s, int rw); 235 int dtls_buffer_listen_record(SSL *s, size_t len, unsigned char *seq, 236 size_t off); 237