1#!/bin/sh 2# 3# OpenSSL config: determine the operating system and run ./Configure 4# 5# "config -h" for usage information. 6# 7# this is a merge of minarch and GuessOS from the Apache Group. 8# Originally written by Tim Hudson <tjh@cryptsoft.com>. 9 10# Original Apache Group comments on GuessOS 11 12# Simple OS/Platform guesser. Similar to config.guess but 13# much, much smaller. Since it was developed for use with 14# Apache, it follows under Apache's regular licensing 15# with one specific addition: Any changes or additions 16# to this script should be Emailed to the Apache 17# group (apache@apache.org) in general and to 18# Jim Jagielski (jim@jaguNET.com) in specific. 19# 20# Be as similar to the output of config.guess/config.sub 21# as possible. 22 23PREFIX="" 24SUFFIX="" 25TEST="false" 26EXE="" 27 28# pick up any command line args to config 29for i 30do 31case "$i" in 32-d) PREFIX="debug-";; 33-t*) TEST="true";; 34-h*) TEST="true"; cat <<EOF 35Usage: config [options] 36 -d Add a debug- prefix to machine choice. 37 -t Test mode, do not run the Configure perl script. 38 -h This help. 39 40Any other text will be passed to the Configure perl script. 41See INSTALL for instructions. 42 43EOF 44;; 45*) options=$options" $i" ;; 46esac 47done 48 49# First get uname entries that we use below 50 51[ "$MACHINE" ] || MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" 52[ "$RELEASE" ] || RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" 53[ "$SYSTEM" ] || SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" 54[ "$BUILD" ] || VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" 55 56 57# Now test for ISC and SCO, since it is has a braindamaged uname. 58# 59# We need to work around FreeBSD 1.1.5.1 60( 61XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` 62if [ "x$XREL" != "x" ]; then 63 if [ -f /etc/kconfig ]; then 64 case "$XREL" in 65 4.0|4.1) 66 echo "${MACHINE}-whatever-isc4"; exit 0 67 ;; 68 esac 69 else 70 case "$XREL" in 71 3.2v4.2) 72 echo "whatever-whatever-sco3"; exit 0 73 ;; 74 3.2v5.0*) 75 echo "whatever-whatever-sco5"; exit 0 76 ;; 77 4.2MP) 78 case "x${VERSION}" in 79 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;; 80 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;; 81 x2*) echo "whatever-whatever-unixware2"; exit 0 ;; 82 esac 83 ;; 84 4.2) 85 echo "whatever-whatever-unixware1"; exit 0 86 ;; 87 5*) 88 case "x${VERSION}" in 89 # We hardcode i586 in place of ${MACHINE} for the 90 # following reason. The catch is that even though Pentium 91 # is minimum requirement for platforms in question, 92 # ${MACHINE} gets always assigned to i386. Now, problem 93 # with i386 is that it makes ./config pass 386 to 94 # ./Configure, which in turn makes make generate 95 # inefficient SHA-1 (for this moment) code. 96 x[678]*) echo "i586-sco-unixware7"; exit 0 ;; 97 esac 98 ;; 99 esac 100 fi 101fi 102# Now we simply scan though... In most cases, the SYSTEM info is enough 103# 104case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in 105 MPE/iX:*) 106 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'` 107 echo "parisc-hp-MPE/iX"; exit 0 108 ;; 109 A/UX:*) 110 echo "m68k-apple-aux3"; exit 0 111 ;; 112 113 AIX:[3-9]:4:*) 114 echo "${MACHINE}-ibm-aix"; exit 0 115 ;; 116 117 AIX:*:[5-9]:*) 118 echo "${MACHINE}-ibm-aix"; exit 0 119 ;; 120 121 AIX:*) 122 echo "${MACHINE}-ibm-aix3"; exit 0 123 ;; 124 125 dgux:*) 126 echo "${MACHINE}-dg-dgux"; exit 0 127 ;; 128 129 HI-UX:*) 130 echo "${MACHINE}-hi-hiux"; exit 0 131 ;; 132 133 HP-UX:*) 134 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` 135 case "$HPUXVER" in 136 1[0-9].*) # HPUX 10 and 11 targets are unified 137 echo "${MACHINE}-hp-hpux1x"; exit 0 138 ;; 139 *) 140 echo "${MACHINE}-hp-hpux"; exit 0 141 ;; 142 esac 143 ;; 144 145 IRIX:5.*) 146 echo "mips2-sgi-irix"; exit 0 147 ;; 148 149 IRIX:6.*) 150 echo "mips3-sgi-irix"; exit 0 151 ;; 152 153 IRIX64:*) 154 echo "mips4-sgi-irix64"; exit 0 155 ;; 156 157 Linux:[2-9].*) 158 echo "${MACHINE}-whatever-linux2"; exit 0 159 ;; 160 161 Linux:1.*) 162 echo "${MACHINE}-whatever-linux1"; exit 0 163 ;; 164 165 GNU*) 166 echo "hurd-x86"; exit 0; 167 ;; 168 169 LynxOS:*) 170 echo "${MACHINE}-lynx-lynxos"; exit 0 171 ;; 172 173 BSD/OS:4.*) # BSD/OS always says 386 174 echo "i486-whatever-bsdi4"; exit 0 175 ;; 176 177 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) 178 case `/sbin/sysctl -n hw.model` in 179 Pentium*) 180 echo "i586-whatever-bsdi"; exit 0 181 ;; 182 *) 183 echo "i386-whatever-bsdi"; exit 0 184 ;; 185 esac; 186 ;; 187 188 BSD/386:*|BSD/OS:*) 189 echo "${MACHINE}-whatever-bsdi"; exit 0 190 ;; 191 192 FreeBSD:*:*:*386*) 193 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` 194 MACH=`sysctl -n hw.model` 195 ARCH='whatever' 196 case ${MACH} in 197 *386* ) MACH="i386" ;; 198 *486* ) MACH="i486" ;; 199 Pentium\ II*) MACH="i686" ;; 200 Pentium* ) MACH="i586" ;; 201 * ) MACH="$MACHINE" ;; 202 esac 203 case ${MACH} in 204 i[0-9]86 ) ARCH="pc" ;; 205 esac 206 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 207 ;; 208 209 FreeBSD:*) 210 echo "${MACHINE}-whatever-freebsd"; exit 0 211 ;; 212 213 NetBSD:*:*:*386*) 214 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 215 ;; 216 217 NetBSD:*) 218 echo "${MACHINE}-whatever-netbsd"; exit 0 219 ;; 220 221 OpenBSD:*) 222 echo "${MACHINE}-whatever-openbsd"; exit 0 223 ;; 224 225 OpenUNIX:*) 226 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 227 ;; 228 229 OSF1:*:*:*alpha*) 230 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` 231 case "$OSFMAJOR" in 232 4|5) 233 echo "${MACHINE}-dec-tru64"; exit 0 234 ;; 235 1|2|3) 236 echo "${MACHINE}-dec-osf"; exit 0 237 ;; 238 *) 239 echo "${MACHINE}-dec-osf"; exit 0 240 ;; 241 esac 242 ;; 243 244 QNX:*) 245 case "$RELEASE" in 246 4*) 247 echo "${MACHINE}-whatever-qnx4" 248 ;; 249 6*) 250 echo "${MACHINE}-whatever-qnx6" 251 ;; 252 *) 253 echo "${MACHINE}-whatever-qnx" 254 ;; 255 esac 256 exit 0 257 ;; 258 259 Paragon*:*:*:*) 260 echo "i860-intel-osf1"; exit 0 261 ;; 262 263 Rhapsody:*) 264 echo "ppc-apple-rhapsody"; exit 0 265 ;; 266 267 Darwin:*) 268 case "$MACHINE" in 269 Power*) 270 echo "ppc-apple-darwin${VERSION}" 271 ;; 272 *) 273 echo "i386-apple-darwin${VERSION}" 274 ;; 275 esac 276 exit 0 277 ;; 278 279 SunOS:5.*) 280 echo "${MACHINE}-whatever-solaris2"; exit 0 281 ;; 282 283 SunOS:*) 284 echo "${MACHINE}-sun-sunos4"; exit 0 285 ;; 286 287 UNIX_System_V:4.*:*) 288 echo "${MACHINE}-whatever-sysv4"; exit 0 289 ;; 290 291 VOS:*:*:i786) 292 echo "i386-stratus-vos"; exit 0 293 ;; 294 295 VOS:*:*:*) 296 echo "hppa1.1-stratus-vos"; exit 0 297 ;; 298 299 *:4*:R4*:m88k) 300 echo "${MACHINE}-whatever-sysv4"; exit 0 301 ;; 302 303 DYNIX/ptx:4*:*) 304 echo "${MACHINE}-whatever-sysv4"; exit 0 305 ;; 306 307 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) 308 echo "i486-ncr-sysv4"; exit 0 309 ;; 310 311 ULTRIX:*) 312 echo "${MACHINE}-unknown-ultrix"; exit 0 313 ;; 314 315 SINIX*|ReliantUNIX*) 316 echo "${MACHINE}-siemens-sysv4"; exit 0 317 ;; 318 319 POSIX-BC*) 320 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" 321 ;; 322 323 machten:*) 324 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; 325 ;; 326 327 library:*) 328 echo "${MACHINE}-ncr-sysv4"; exit 0 329 ;; 330 331 ConvexOS:*:11.0:*) 332 echo "${MACHINE}-v11-${SYSTEM}"; exit 0; 333 ;; 334 335 NEWS-OS:4.*) 336 echo "mips-sony-newsos4"; exit 0; 337 ;; 338 339 MINGW*) 340 echo "${MACHINE}-whatever-mingw"; exit 0; 341 ;; 342 CYGWIN*) 343 case "$RELEASE" in 344 [bB]*|1.0|1.[12].*) 345 echo "${MACHINE}-whatever-cygwin_pre1.3" 346 ;; 347 *) 348 echo "${MACHINE}-whatever-cygwin" 349 ;; 350 esac 351 exit 0 352 ;; 353 354 *"CRAY T3E") 355 echo "t3e-cray-unicosmk"; exit 0; 356 ;; 357 358 *CRAY*) 359 echo "j90-cray-unicos"; exit 0; 360 ;; 361 362 NONSTOP_KERNEL*) 363 echo "nsr-tandem-nsk"; exit 0; 364 ;; 365esac 366 367# 368# Ugg. These are all we can determine by what we know about 369# the output of uname. Be more creative: 370# 371 372# Do the Apollo stuff first. Here, we just simply assume 373# that the existance of the /usr/apollo directory is proof 374# enough 375if [ -d /usr/apollo ]; then 376 echo "whatever-apollo-whatever" 377 exit 0 378fi 379 380# Now NeXT 381ISNEXT=`hostinfo 2>/dev/null` 382case "$ISNEXT" in 383 *'NeXT Mach 3.3'*) 384 echo "whatever-next-nextstep3.3"; exit 0 385 ;; 386 *NeXT*) 387 echo "whatever-next-nextstep"; exit 0 388 ;; 389esac 390 391# At this point we gone through all the one's 392# we know of: Punt 393 394echo "${MACHINE}-whatever-${SYSTEM}" 395exit 0 396) 2>/dev/null | ( 397 398# --------------------------------------------------------------------------- 399# this is where the translation occurs into SSLeay terms 400# --------------------------------------------------------------------------- 401 402GCCVER=`(gcc -dumpversion) 2>/dev/null` 403if [ "$GCCVER" != "" ]; then 404 # then strip off whatever prefix egcs prepends the number with... 405 # Hopefully, this will work for any future prefixes as well. 406 GCCVER=`echo $GCCVER | LC_ALL=C sed 's/^[a-zA-Z]*\-//'` 407 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion 408 # does give us what we want though, so we use that. We just just the 409 # major and minor version numbers. 410 # peak single digit before and after first dot, e.g. 2.95.1 gives 29 411 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` 412fi 413 414# Only set CC if not supplied already 415if [ -z "$CC" ]; then 416# figure out if gcc is available and if so we use it otherwise 417# we fallback to whatever cc does on the system 418 if [ "$GCCVER" != "" ]; then 419 CC=gcc 420 else 421 CC=cc 422 fi 423fi 424GCCVER=${GCCVER:-0} 425if [ "$SYSTEM" = "HP-UX" ];then 426 # By default gcc is a ILP32 compiler (with long long == 64). 427 GCC_BITS="32" 428 if [ $GCCVER -ge 30 ]; then 429 # PA64 support only came in with gcc 3.0.x. 430 # We check if the preprocessor symbol __LP64__ is defined... 431 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then 432 : # __LP64__ has slipped through, it therefore is not defined 433 else 434 GCC_BITS="64" 435 fi 436 fi 437fi 438if [ "$SYSTEM" = "SunOS" ]; then 439 if [ $GCCVER -ge 30 ]; then 440 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears 441 # to be working, at the very least 'make test' passes... 442 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then 443 GCC_ARCH="-m64" 444 else 445 GCC_ARCH="-m32" 446 fi 447 fi 448 # check for WorkShop C, expected output is "cc: blah-blah C x.x" 449 CCVER=`(cc -V 2>&1) 2>/dev/null | \ 450 egrep -e '^cc: .* C [0-9]\.[0-9]' | \ 451 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` 452 CCVER=${CCVER:-0} 453 if [ $MACHINE != i86pc -a $CCVER -gt 40 ]; then 454 CC=cc # overrides gcc!!! 455 if [ $CCVER -eq 50 ]; then 456 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" 457 echo " patch #107357-01 or later applied." 458 sleep 5 459 fi 460 fi 461fi 462 463if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then 464 # check for Compaq C, expected output is "blah-blah C Vx.x" 465 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \ 466 egrep -e '.* C V[0-9]\.[0-9]' | \ 467 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'` 468 CCCVER=${CCCVER:-0} 469 if [ $CCCVER -gt 60 ]; then 470 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably 471 # only on hash routines and des, otherwise gcc (2.95) 472 # keeps along rather tight... 473 fi 474fi 475 476if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc 477 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc 478fi 479 480CCVER=${CCVER:-0} 481 482# read the output of the embedded GuessOS 483read GUESSOS 484 485echo Operating system: $GUESSOS 486 487# now map the output into SSLeay terms ... really should hack into the 488# script above so we end up with values in vars but that would take 489# more time that I want to waste at the moment 490case "$GUESSOS" in 491 mips2-sgi-irix) 492 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 493 CPU=${CPU:-0} 494 if [ $CPU -ge 4000 ]; then 495 options="$options -mips2" 496 fi 497 OUT="irix-$CC" 498 ;; 499 mips3-sgi-irix) 500 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 501 #CPU=${CPU:-0} 502 #if [ $CPU -ge 5000 ]; then 503 # options="$options -mips4" 504 #else 505 # options="$options -mips3" 506 #fi 507 OUT="irix-mips3-$CC" 508 ;; 509 mips4-sgi-irix64) 510 echo "WARNING! If you wish to build 64-bit library, then you have to" 511 echo " invoke './Configure irix64-mips4-$CC' *manually*." 512 if [ "$TEST" = "false" -a -t 1 ]; then 513 echo " You have about 5 seconds to press Ctrl-C to abort." 514 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 515 fi 516 #CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 517 #CPU=${CPU:-0} 518 #if [ $CPU -ge 5000 ]; then 519 # options="$options -mips4" 520 #else 521 # options="$options -mips3" 522 #fi 523 OUT="irix-mips3-$CC" 524 ;; 525 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; 526 ppc-apple-darwin*) OUT="darwin-ppc-cc" ;; 527 i386-apple-darwin*) OUT="darwin-i386-cc" ;; 528 alpha-*-linux2) 529 ISA=`awk '/cpu model/{print$4;exit(0);}' /proc/cpuinfo` 530 case ${ISA:-generic} in 531 *[678]) OUT="linux-alpha+bwx-$CC" ;; 532 *) OUT="linux-alpha-$CC" ;; 533 esac 534 if [ "$CC" = "gcc" ]; then 535 case ${ISA:-generic} in 536 EV5|EV45) options="$options -mcpu=ev5";; 537 EV56|PCA56) options="$options -mcpu=ev56";; 538 *) options="$options -mcpu=ev6";; 539 esac 540 fi 541 ;; 542 ppc64-*-linux2) 543 echo "WARNING! If you wish to build 64-bit library, then you have to" 544 echo " invoke './Configure linux-ppc64' *manually*." 545 if [ "$TEST" = "false" -a -t 1 ]; then 546 echo " You have about 5 seconds to press Ctrl-C to abort." 547 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 548 fi 549 OUT="linux-ppc" 550 ;; 551 ppc-*-linux2) OUT="linux-ppc" ;; 552 ia64-*-linux?) OUT="linux-ia64" ;; 553 sparc64-*-linux2) 554 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI" 555 echo " and wish to build 64-bit library, then you have to" 556 echo " invoke './Configure linux64-sparcv9' *manually*." 557 if [ "$TEST" = "false" -a -t 1 ]; then 558 echo " You have about 5 seconds to press Ctrl-C to abort." 559 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 560 fi 561 OUT="linux-sparcv9" ;; 562 sparc-*-linux2) 563 KARCH=`awk '/^type/{print$3;exit(0);}' /proc/cpuinfo` 564 case ${KARCH:-sun4} in 565 sun4u*) OUT="linux-sparcv9" ;; 566 sun4m) OUT="linux-sparcv8" ;; 567 sun4d) OUT="linux-sparcv8" ;; 568 *) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 569 esac ;; 570 parisc*-*-linux2) 571 # 64-bit builds under parisc64 linux are not supported and 572 # compiler is expected to generate 32-bit objects... 573 CPUARCH=`awk '/cpu family/{print substr($5,1,3); exit(0);}' /proc/cpuinfo` 574 CPUSCHEDULE=`awk '/^cpu.[ ]*: PA/{print substr($3,3); exit(0);}' /proc/cpuinfo` 575 576 # ??TODO ?? Model transformations 577 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off 578 # assuming no further arch. identification will ever be used by GCC. 579 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. 580 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers 581 # for these chips in the future. 582 # PA7300LC -> 7100LC (1.1) 583 # PA8200 -> 8000 (2.0) 584 # PA8500 -> 8000 (2.0) 585 # PA8600 -> 8000 (2.0) 586 587 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8.00/8000/'` 588 # Finish Model transformations 589 590 options="$options -DB_ENDIAN -mschedule=$CPUSCHEDULE -march=$CPUARCH" 591 OUT="linux-generic32" ;; 592 arm*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 593 arm*l-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;; 594 sh*b-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 595 sh*-*-linux2) OUT="linux-generic32"; options="$options -DL_ENDIAN" ;; 596 m68k*-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN" ;; 597 s390-*-linux2) OUT="linux-generic32"; options="$options -DB_ENDIAN -DNO_ASM" ;; 598 s390x-*-linux2) OUT="linux-generic64"; options="$options -DB_ENDIAN" ;; 599 x86_64-*-linux?) OUT="linux-x86_64" ;; 600 *86-*-linux2) OUT="linux-elf" 601 if [ "$GCCVER" -gt 28 ]; then 602 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then 603 options="$options -march=pentium" 604 fi 605 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then 606 options="$options -march=pentiumpro" 607 fi 608 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then 609 options="$options -march=k6" 610 fi 611 fi ;; 612 *-*-linux1) OUT="linux-aout" ;; 613 *-*-linux2) OUT="linux-generic32" ;; 614 sun4[uv]*-*-solaris2) 615 OUT="solaris-sparcv9-$CC" 616 ISA64=`(isalist) 2>/dev/null | grep sparcv9` 617 if [ "$ISA64" != "" ]; then 618 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then 619 echo "WARNING! If you wish to build 64-bit library, then you have to" 620 echo " invoke './Configure solaris64-sparcv9-cc' *manually*." 621 if [ "$TEST" = "false" -a -t 1 ]; then 622 echo " You have about 5 seconds to press Ctrl-C to abort." 623 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 624 fi 625 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then 626 # $GCC_ARCH denotes default ABI chosen by compiler driver 627 # (first one found on the $PATH). I assume that user 628 # expects certain consistency with the rest of his builds 629 # and therefore switch over to 64-bit. <appro> 630 OUT="solaris64-sparcv9-gcc" 631 echo "WARNING! If you wish to build 32-bit library, then you have to" 632 echo " invoke './Configure solaris-sparcv9-gcc' *manually*." 633 if [ "$TEST" = "false" -a -t 1 ]; then 634 echo " You have about 5 seconds to press Ctrl-C to abort." 635 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 636 fi 637 elif [ "$GCC_ARCH" = "-m32" ]; then 638 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" 639 echo " and wish to build 64-bit library, then you have to" 640 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*." 641 if [ "$TEST" = "false" -a -t 1 ]; then 642 echo " You have about 5 seconds to press Ctrl-C to abort." 643 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 644 fi 645 fi 646 fi 647 ;; 648 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 649 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 650 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; 651 *86*-*-solaris2) 652 ISA64=`(isalist) 2>/dev/null | grep amd64` 653 if [ "$ISA64" != "" ]; then 654 OUT="solaris64-x86_64-$CC" 655 else 656 OUT="solaris-x86-$CC" 657 if [ `uname -r | sed -e 's/5\.//'` -lt 10 ]; then 658 options="$options no-sse2" 659 fi 660 fi 661 ;; 662 *-*-sunos4) OUT="sunos-$CC" ;; 663 664 *86*-*-bsdi4) OUT="BSD-x86-elf"; options="$options no-sse2 -ldl" ;; 665 alpha*-*-*bsd*) OUT="BSD-generic64"; options="$options -DL_ENDIAN" ;; 666 powerpc64-*-*bsd*) OUT="BSD-generic64"; options="$options -DB_ENDIAN" ;; 667 sparc64-*-*bsd*) OUT="BSD-sparc64" ;; 668 ia64-*-*bsd*) OUT="BSD-ia64" ;; 669 amd64-*-*bsd*) OUT="BSD-x86_64" ;; 670 *86*-*-*bsd*) # mimic ld behaviour when it's looking for libc... 671 if [ -L /usr/lib/libc.so ]; then # [Free|Net]BSD 672 libc=/usr/lib/libc.so 673 else # OpenBSD 674 # ld searches for highest libc.so.* and so do we 675 libc=`(ls /usr/lib/libc.so.* | tail -1) 2>/dev/null` 676 fi 677 case "`(file -L $libc) 2>/dev/null`" in 678 *ELF*) OUT="BSD-x86-elf" ;; 679 *) OUT="BSD-x86"; options="$options no-sse2" ;; 680 esac ;; 681 *-*-*bsd*) OUT="BSD-generic32" ;; 682 683 *-*-osf) OUT="osf1-alpha-cc" ;; 684 *-*-tru64) OUT="tru64-alpha-cc" ;; 685 *-*-[Uu]nix[Ww]are7) 686 if [ "$CC" = "gcc" ]; then 687 OUT="unixware-7-gcc" ; options="$options no-sse2" 688 else 689 OUT="unixware-7" ; options="$options no-sse2 -D__i386__" 690 fi 691 ;; 692 *-*-[Uu]nix[Ww]are20*) OUT="unixware-2.0"; options="$options no-sse2 no-sha512" ;; 693 *-*-[Uu]nix[Ww]are21*) OUT="unixware-2.1"; options="$options no-sse2 no-sha512" ;; 694 *-*-vos) 695 options="$options no-threads no-shared no-asm no-dso" 696 EXE=".pm" 697 OUT="vos-$CC" ;; 698 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; 699 RM*-siemens-sysv4) OUT="ReliantUNIX" ;; 700 *-siemens-sysv4) OUT="SINIX" ;; 701 *-hpux1*) 702 if [ $CC = "gcc" -a $GCC_BITS = "64" ]; then 703 OUT="hpux64-parisc2-gcc" 704 fi 705 KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` 706 KERNEL_BITS=${KERNEL_BITS:-32} 707 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` 708 CPU_VERSION=${CPU_VERSION:-0} 709 # See <sys/unistd.h> for further info on CPU_VERSION. 710 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU 711 echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi." 712 echo " If you wish to build 32-bit library, the you have to" 713 echo " invoke './Configure hpux-ia64-cc' *manually*." 714 if [ "$TEST" = "false" -a -t 1 ]; then 715 echo " You have about 5 seconds to press Ctrl-C to abort." 716 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 717 fi 718 OUT="hpux64-ia64-cc" 719 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU 720 OUT=${OUT:-"hpux-parisc2-${CC}"} 721 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then 722 echo "WARNING! If you wish to build 64-bit library then you have to" 723 echo " invoke './Configure hpux64-parisc2-cc' *manually*." 724 if [ "$TEST" = "false" -a -t 1 ]; then 725 echo " You have about 5 seconds to press Ctrl-C to abort." 726 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 727 fi 728 fi 729 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU 730 OUT="hpux-parisc-${CC}" 731 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU 732 OUT="hpux-parisc-${CC}" 733 else # Motorola(?) CPU 734 OUT="hpux-$CC" 735 fi 736 options="$options -D_REENTRANT" ;; 737 *-hpux) OUT="hpux-parisc-$CC" ;; 738 *-aix) 739 KERNEL_BITS=`(getconf KERNEL_BITMODE) 2>/dev/null` 740 KERNEL_BITS=${KERNEL_BITS:-32} 741 OBJECT_MODE=${OBJECT_MODE:-32} 742 if [ "$CC" = "gcc" ]; then 743 OUT="aix-gcc" 744 if [ $OBJECT_MODE -eq 64 ]; then 745 echo 'Your $OBJECT_MODE was found to be set to 64' 746 OUT="aix64-gcc" 747 fi 748 elif [ $OBJECT_MODE -eq 64 ]; then 749 echo 'Your $OBJECT_MODE was found to be set to 64' 750 OUT="aix64-cc" 751 else 752 OUT="aix-cc" 753 if [ $KERNEL_BITS -eq 64 ]; then 754 echo "WARNING! If you wish to build 64-bit kit, then you have to" 755 echo " invoke './Configure aix64-cc' *manually*." 756 if [ "$TEST" = "false" -a -t 1 ]; then 757 echo " You have ~5 seconds to press Ctrl-C to abort." 758 (trap "stty `stty -g`" 2 0; stty -icanon min 0 time 50; read waste) <&1 759 fi 760 fi 761 fi 762 if (lsattr -E -O -l `lsdev -c processor|awk '{print$1;exit}'` | grep -i powerpc) >/dev/null 2>&1; then 763 : # this applies even to Power3 and later, as they return PowerPC_POWER[345] 764 else 765 options="$options no-asm" 766 fi 767 ;; 768 # these are all covered by the catchall below 769 # *-dgux) OUT="dgux" ;; 770 mips-sony-newsos4) OUT="newsos4-gcc" ;; 771 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;; 772 *-*-cygwin) OUT="Cygwin" ;; 773 t3e-cray-unicosmk) OUT="cray-t3e" ;; 774 j90-cray-unicos) OUT="cray-j90" ;; 775 nsr-tandem-nsk) OUT="tandem-c89" ;; 776 x86pc-*-qnx6) OUT="QNX6-i386" ;; 777 *-*-qnx6) OUT="QNX6" ;; 778 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; 779esac 780 781# NB: This atalla support has been superceded by the ENGINE support 782# That contains its own header and definitions anyway. Support can 783# be enabled or disabled on any supported platform without external 784# headers, eg. by adding the "hw-atalla" switch to ./config or 785# perl Configure 786# 787# See whether we can compile Atalla support 788#if [ -f /usr/include/atasi.h ] 789#then 790# options="$options -DATALLA" 791#fi 792 793# gcc < 2.8 does not support -march=ultrasparc 794if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] 795then 796 echo "WARNING! Falling down to 'solaris-sparcv8-gcc'." 797 echo " Upgrade to gcc-2.8 or later." 798 sleep 5 799 OUT=solaris-sparcv8-gcc 800fi 801if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] 802then 803 echo "WARNING! Falling down to 'linux-sparcv8'." 804 echo " Upgrade to gcc-2.8 or later." 805 sleep 5 806 OUT=linux-sparcv8 807fi 808 809case "$GUESSOS" in 810 i386-*) options="$options 386" ;; 811esac 812 813for i in aes bf camellia cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 ripemd rsa seed sha 814do 815 if [ ! -d crypto/$i ] 816 then 817 options="$options no-$i" 818 fi 819done 820 821# Discover Kerberos 5 (since it's still a prototype, we don't 822# do any guesses yet, that's why this section is commented away. 823#if [ -d /usr/kerberos ]; then 824# krb5_dir=/usr/kerberos 825# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\ 826# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ 827# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ 828# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\ 829# -a \( -f $krb5_dir/include/krb5.h \) ]; then 830# options="$options --with-krb5-flavor=MIT" 831# fi 832#elif [ -d /usr/heimdal ]; then 833# krb5_dir=/usr/heimdal 834# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\ 835# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ 836# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ 837# -a \( -f $krb5_dir/include/krb5.h \) ]; then 838# options="$options --with-krb5-flavor=Heimdal" 839# fi 840#fi 841 842if [ -z "$OUT" ]; then 843 OUT="$CC" 844fi 845 846if [ ".$PERL" = . ] ; then 847 for i in . `echo $PATH | sed 's/:/ /g'`; do 848 if [ -f "$i/perl5$EXE" ] ; then 849 PERL="$i/perl5$EXE" 850 break; 851 fi; 852 done 853fi 854 855if [ ".$PERL" = . ] ; then 856 for i in . `echo $PATH | sed 's/:/ /g'`; do 857 if [ -f "$i/perl$EXE" ] ; then 858 if "$i/perl$EXE" -e 'exit($]<5.0)'; then 859 PERL="$i/perl$EXE" 860 break; 861 fi; 862 fi; 863 done 864fi 865 866if [ ".$PERL" = . ] ; then 867 echo "You need Perl 5." 868 exit 1 869fi 870 871# run Configure to check to see if we need to specify the 872# compiler for the platform ... in which case we add it on 873# the end ... otherwise we leave it off 874 875$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null 876if [ $? = "0" ]; then 877 OUT="$OUT-$CC" 878fi 879 880OUT="$PREFIX$OUT" 881 882$PERL ./Configure LIST | grep "$OUT" > /dev/null 883if [ $? = "0" ]; then 884 echo Configuring for $OUT 885 886 if [ "$TEST" = "true" ]; then 887 echo $PERL ./Configure $OUT $options 888 else 889 $PERL ./Configure $OUT $options 890 fi 891else 892 echo "This system ($OUT) is not supported. See file INSTALL for details." 893fi 894) 895