1#!/bin/sh 2# 3# OpenSSL config: determine the operating system and run ./Configure 4# 5# "config -h" for usage information. 6# 7# this is a merge of minarch and GuessOS from the Apache Group. 8# Originally written by Tim Hudson <tjh@cryptsoft.com>. 9 10# Original Apache Group comments on GuessOS 11 12# Simple OS/Platform guesser. Similar to config.guess but 13# much, much smaller. Since it was developed for use with 14# Apache, it follows under Apache's regular licensing 15# with one specific addition: Any changes or additions 16# to this script should be Emailed to the Apache 17# group (apache@apache.org) in general and to 18# Jim Jagielski (jim@jaguNET.com) in specific. 19# 20# Be as similar to the output of config.guess/config.sub 21# as possible. 22 23PREFIX="" 24SUFFIX="" 25TEST="false" 26EXE="" 27 28# pick up any command line args to config 29for i 30do 31case "$i" in 32-d*) PREFIX="debug-";; 33-t*) TEST="true";; 34-h*) TEST="true"; cat <<EOF 35Usage: config [options] 36 -d Add a debug- prefix to machine choice. 37 -t Test mode, do not run the Configure perl script. 38 -h This help. 39 40Any other text will be passed to the Configure perl script. 41See INSTALL for instructions. 42 43EOF 44;; 45*) options=$options" $i" ;; 46esac 47done 48 49# First get uname entries that we use below 50 51MACHINE=`(uname -m) 2>/dev/null` || MACHINE="unknown" 52RELEASE=`(uname -r) 2>/dev/null` || RELEASE="unknown" 53SYSTEM=`(uname -s) 2>/dev/null` || SYSTEM="unknown" 54VERSION=`(uname -v) 2>/dev/null` || VERSION="unknown" 55 56 57# Now test for ISC and SCO, since it is has a braindamaged uname. 58# 59# We need to work around FreeBSD 1.1.5.1 60( 61XREL=`uname -X 2>/dev/null | grep "^Release" | awk '{print $3}'` 62if [ "x$XREL" != "x" ]; then 63 if [ -f /etc/kconfig ]; then 64 case "$XREL" in 65 4.0|4.1) 66 echo "${MACHINE}-whatever-isc4"; exit 0 67 ;; 68 esac 69 else 70 case "$XREL" in 71 3.2v4.2) 72 echo "whatever-whatever-sco3"; exit 0 73 ;; 74 3.2v5.0*) 75 echo "whatever-whatever-sco5"; exit 0 76 ;; 77 4.2MP) 78 case "x${VERSION}" in 79 x2.0*) echo "whatever-whatever-unixware20"; exit 0 ;; 80 x2.1*) echo "whatever-whatever-unixware21"; exit 0 ;; 81 x2*) echo "whatever-whatever-unixware2"; exit 0 ;; 82 esac 83 ;; 84 4.2) 85 echo "i386-whatever-unixware1"; exit 0 86 ;; 87 5) 88 case "x${VERSION}" in 89 # We hardcode i586 in place of ${MACHINE} for the 90 # following reason. The catch is that even though Pentium 91 # is minimum requirement for platforms in question, 92 # ${MACHINE} gets always assigned to i386. Now, problem 93 # with i386 is that it makes ./config pass 386 to 94 # ./Configure, which in turn makes make generate 95 # inefficient SHA-1 (for this moment) code. 96 x7*) echo "i586-sco-unixware7"; exit 0 ;; 97 x8*) echo "i586-unkn-OpenUNIX${VERSION}"; exit 0 ;; 98 esac 99 ;; 100 esac 101 fi 102fi 103# Now we simply scan though... In most cases, the SYSTEM info is enough 104# 105case "${SYSTEM}:${RELEASE}:${VERSION}:${MACHINE}" in 106 MPE/iX:*) 107 MACHINE=`echo "$MACHINE" | sed -e 's/-/_/g'` 108 echo "parisc-hp-MPE/iX"; exit 0 109 ;; 110 A/UX:*) 111 echo "m68k-apple-aux3"; exit 0 112 ;; 113 114 AIX:[3456789]:4:*) 115 echo "${MACHINE}-ibm-aix43"; exit 0 116 ;; 117 118 AIX:*:[56789]:*) 119 echo "${MACHINE}-ibm-aix43"; exit 0 120 ;; 121 122 AIX:*) 123 echo "${MACHINE}-ibm-aix"; exit 0 124 ;; 125 126 dgux:*) 127 echo "${MACHINE}-dg-dgux"; exit 0 128 ;; 129 130 HI-UX:*) 131 echo "${MACHINE}-hi-hiux"; exit 0 132 ;; 133 134 HP-UX:*) 135 HPUXVER=`echo ${RELEASE}|sed -e 's/[^.]*.[0B]*//'` 136 case "$HPUXVER" in 137 1[0-9].*) # HPUX 10 and 11 targets are unified 138 echo "${MACHINE}-hp-hpux1x"; exit 0 139 ;; 140 *) 141 echo "${MACHINE}-hp-hpux"; exit 0 142 ;; 143 esac 144 ;; 145 146 IRIX:5.*) 147 echo "mips2-sgi-irix"; exit 0 148 ;; 149 150 IRIX:6.*) 151 echo "mips3-sgi-irix"; exit 0 152 ;; 153 154 IRIX64:*) 155 echo "mips4-sgi-irix64"; exit 0 156 ;; 157 158 Linux:[2-9].*) 159 echo "${MACHINE}-whatever-linux2"; exit 0 160 ;; 161 162 Linux:1.*) 163 echo "${MACHINE}-whatever-linux1"; exit 0 164 ;; 165 166 GNU*) 167 echo "hurd-x86"; exit 0; 168 ;; 169 170 LynxOS:*) 171 echo "${MACHINE}-lynx-lynxos"; exit 0 172 ;; 173 174 BSD/OS:4.*) # BSD/OS always says 386 175 echo "i486-whatever-bsdi4"; exit 0 176 ;; 177 178 BSD/386:*:*:*486*|BSD/OS:*:*:*:*486*) 179 case `/sbin/sysctl -n hw.model` in 180 Pentium*) 181 echo "i586-whatever-bsdi"; exit 0 182 ;; 183 *) 184 echo "i386-whatever-bsdi"; exit 0 185 ;; 186 esac; 187 ;; 188 189 BSD/386:*|BSD/OS:*) 190 echo "${MACHINE}-whatever-bsdi"; exit 0 191 ;; 192 193 FreeBSD:*:*:*386*) 194 VERS=`echo ${RELEASE} | sed -e 's/[-(].*//'` 195 MACH=`sysctl -n hw.model` 196 ARCH='whatever' 197 case ${MACH} in 198 *386* ) MACH="i386" ;; 199 *486* ) MACH="i486" ;; 200 Pentium\ II*) MACH="i686" ;; 201 Pentium* ) MACH="i586" ;; 202 * ) MACH="$MACHINE" ;; 203 esac 204 case ${MACH} in 205 i[0-9]86 ) ARCH="pc" ;; 206 esac 207 echo "${MACH}-${ARCH}-freebsd${VERS}"; exit 0 208 ;; 209 210 FreeBSD:*) 211 echo "${MACHINE}-whatever-freebsd"; exit 0 212 ;; 213 214 NetBSD:*:*:*386*) 215 echo "`(/usr/sbin/sysctl -n hw.model || /sbin/sysctl -n hw.model) | sed 's,.*\(.\)86-class.*,i\186,'`-whatever-netbsd"; exit 0 216 ;; 217 218 NetBSD:*) 219 echo "${MACHINE}-whatever-netbsd"; exit 0 220 ;; 221 222 OpenBSD:*) 223 echo "${MACHINE}-whatever-openbsd"; exit 0 224 ;; 225 226 OpenUNIX:*) 227 echo "${MACHINE}-unknown-OpenUNIX${VERSION}"; exit 0 228 ;; 229 230 OSF1:*:*:*alpha*) 231 OSFMAJOR=`echo ${RELEASE}| sed -e 's/^V\([0-9]*\)\..*$/\1/'` 232 case "$OSFMAJOR" in 233 4|5) 234 echo "${MACHINE}-dec-tru64"; exit 0 235 ;; 236 1|2|3) 237 echo "${MACHINE}-dec-osf"; exit 0 238 ;; 239 *) 240 echo "${MACHINE}-dec-osf"; exit 0 241 ;; 242 esac 243 ;; 244 245 QNX:*) 246 case "$RELEASE" in 247 4*) 248 echo "${MACHINE}-whatever-qnx4" 249 ;; 250 6*) 251 echo "${MACHINE}-whatever-qnx6" 252 ;; 253 *) 254 echo "${MACHINE}-whatever-qnx" 255 ;; 256 esac 257 exit 0 258 ;; 259 260 Paragon*:*:*:*) 261 echo "i860-intel-osf1"; exit 0 262 ;; 263 264 Rhapsody:*) 265 echo "ppc-apple-rhapsody"; exit 0 266 ;; 267 268 Darwin:*) 269 case "$MACHINE" in 270 Power*) 271 echo "ppc-apple-darwin${VERSION}" 272 ;; 273 *) 274 echo "i386-apple-darwin${VERSION}" 275 ;; 276 esac 277 exit 0 278 ;; 279 280 SunOS:5.*) 281 echo "${MACHINE}-whatever-solaris2"; exit 0 282 ;; 283 284 SunOS:*) 285 echo "${MACHINE}-sun-sunos4"; exit 0 286 ;; 287 288 UNIX_System_V:4.*:*) 289 echo "${MACHINE}-whatever-sysv4"; exit 0 290 ;; 291 292 VOS:*:*:i786) 293 echo "i386-stratus-vos"; exit 0 294 ;; 295 296 VOS:*:*:*) 297 echo "hppa1.1-stratus-vos"; exit 0 298 ;; 299 300 *:4*:R4*:m88k) 301 echo "${MACHINE}-whatever-sysv4"; exit 0 302 ;; 303 304 DYNIX/ptx:4*:*) 305 echo "${MACHINE}-whatever-sysv4"; exit 0 306 ;; 307 308 *:4.0:3.0:3[34]?? | *:4.0:3.0:3[34]??,*) 309 echo "i486-ncr-sysv4"; exit 0 310 ;; 311 312 ULTRIX:*) 313 echo "${MACHINE}-unknown-ultrix"; exit 0 314 ;; 315 316 SINIX*|ReliantUNIX*) 317 echo "${MACHINE}-siemens-sysv4"; exit 0 318 ;; 319 320 POSIX-BC*) 321 echo "${MACHINE}-siemens-sysv4"; exit 0 # Here, $MACHINE == "BS2000" 322 ;; 323 324 machten:*) 325 echo "${MACHINE}-tenon-${SYSTEM}"; exit 0; 326 ;; 327 328 library:*) 329 echo "${MACHINE}-ncr-sysv4"; exit 0 330 ;; 331 332 ConvexOS:*:11.0:*) 333 echo "${MACHINE}-v11-${SYSTEM}"; exit 0; 334 ;; 335 336 NEWS-OS:4.*) 337 echo "mips-sony-newsos4"; exit 0; 338 ;; 339 340 CYGWIN*) 341 case "$RELEASE" in 342 [bB]*|1.0|1.[12].*) 343 echo "${MACHINE}-whatever-cygwin_pre1.3" 344 ;; 345 *) 346 echo "${MACHINE}-whatever-cygwin" 347 ;; 348 esac 349 exit 0 350 ;; 351 352 *"CRAY T3E") 353 echo "t3e-cray-unicosmk"; exit 0; 354 ;; 355 356 *CRAY*) 357 echo "j90-cray-unicos"; exit 0; 358 ;; 359 360 NONSTOP_KERNEL*) 361 echo "nsr-tandem-nsk"; exit 0; 362 ;; 363esac 364 365# 366# Ugg. These are all we can determine by what we know about 367# the output of uname. Be more creative: 368# 369 370# Do the Apollo stuff first. Here, we just simply assume 371# that the existance of the /usr/apollo directory is proof 372# enough 373if [ -d /usr/apollo ]; then 374 echo "whatever-apollo-whatever" 375 exit 0 376fi 377 378# Now NeXT 379ISNEXT=`hostinfo 2>/dev/null` 380case "$ISNEXT" in 381 *'NeXT Mach 3.3'*) 382 echo "whatever-next-nextstep3.3"; exit 0 383 ;; 384 *NeXT*) 385 echo "whatever-next-nextstep"; exit 0 386 ;; 387esac 388 389# At this point we gone through all the one's 390# we know of: Punt 391 392echo "${MACHINE}-whatever-${SYSTEM}" 393exit 0 394) 2>/dev/null | ( 395 396# --------------------------------------------------------------------------- 397# this is where the translation occurs into SSLeay terms 398# --------------------------------------------------------------------------- 399 400# figure out if gcc is available and if so we use it otherwise 401# we fallback to whatever cc does on the system 402GCCVER=`(gcc -dumpversion) 2>/dev/null` 403if [ "$GCCVER" != "" ]; then 404 CC=gcc 405 # then strip off whatever prefix egcs prepends the number with... 406 # Hopefully, this will work for any future prefixes as well. 407 GCCVER=`echo $GCCVER | sed 's/^[a-zA-Z]*\-//'` 408 # Since gcc 3.1 gcc --version behaviour has changed. gcc -dumpversion 409 # does give us what we want though, so we use that. We just just the 410 # major and minor version numbers. 411 # peak single digit before and after first dot, e.g. 2.95.1 gives 29 412 GCCVER=`echo $GCCVER | sed 's/\([0-9]\)\.\([0-9]\).*/\1\2/'` 413else 414 CC=cc 415fi 416GCCVER=${GCCVER:-0} 417if [ "$SYSTEM" = "HP-UX" ];then 418 # By default gcc is a ILP32 compiler (with long long == 64). 419 GCC_BITS="32" 420 if [ $GCCVER -ge 30 ]; then 421 # PA64 support only came in with gcc 3.0.x. 422 # We check if the preprocessor symbol __LP64__ is defined... 423 if echo "__LP64__" | gcc -v -E -x c - 2>/dev/null | grep "^__LP64__" 2>&1 > /dev/null; then 424 : # __LP64__ has slipped through, it therefore is not defined 425 else 426 GCC_BITS="64" 427 fi 428 fi 429fi 430if [ "$SYSTEM" = "SunOS" ]; then 431 if [ $GCCVER -ge 30 ]; then 432 # 64-bit ABI isn't officially supported in gcc 3.0, but it appears 433 # to be working, at the very least 'make test' passes... 434 if gcc -v -E -x c /dev/null 2>&1 | grep __arch64__ > /dev/null; then 435 GCC_ARCH="-m64" 436 else 437 GCC_ARCH="-m32" 438 fi 439 fi 440 # check for WorkShop C, expected output is "cc: blah-blah C x.x" 441 CCVER=`(cc -V 2>&1) 2>/dev/null | \ 442 egrep -e '^cc: .* C [0-9]\.[0-9]' | \ 443 sed 's/.* C \([0-9]\)\.\([0-9]\).*/\1\2/'` 444 CCVER=${CCVER:-0} 445 if [ $CCVER -gt 40 ]; then 446 CC=cc # overrides gcc!!! 447 if [ $CCVER -eq 50 ]; then 448 echo "WARNING! Detected WorkShop C 5.0. Do make sure you have" 449 echo " patch #107357-01 or later applied." 450 sleep 5 451 fi 452 elif [ "$CC" = "cc" -a $CCVER -gt 0 ]; then 453 CC=sc3 454 fi 455fi 456 457if [ "${SYSTEM}-${MACHINE}" = "Linux-alpha" ]; then 458 # check for Compaq C, expected output is "blah-blah C Vx.x" 459 CCCVER=`(ccc -V 2>&1) 2>/dev/null | \ 460 egrep -e '.* C V[0-9]\.[0-9]' | \ 461 sed 's/.* C V\([0-9]\)\.\([0-9]\).*/\1\2/'` 462 CCCVER=${CCCVER:-0} 463 if [ $CCCVER -gt 60 ]; then 464 CC=ccc # overrides gcc!!! well, ccc outperforms inoticeably 465 # only on hash routines and des, otherwise gcc (2.95) 466 # keeps along rather tight... 467 fi 468fi 469 470if [ "${SYSTEM}" = "AIX" ]; then # favor vendor cc over gcc 471 (cc) 2>&1 | grep -iv "not found" > /dev/null && CC=cc 472fi 473 474CCVER=${CCVER:-0} 475 476# read the output of the embedded GuessOS 477read GUESSOS 478 479echo Operating system: $GUESSOS 480 481# now map the output into SSLeay terms ... really should hack into the 482# script above so we end up with values in vars but that would take 483# more time that I want to waste at the moment 484case "$GUESSOS" in 485 mips2-sgi-irix) 486 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 487 CPU=${CPU:-0} 488 if [ $CPU -ge 4000 ]; then 489 options="$options -mips2" 490 fi 491 OUT="irix-$CC" 492 ;; 493 mips3-sgi-irix) 494 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 495 CPU=${CPU:-0} 496 if [ $CPU -ge 5000 ]; then 497 options="$options -mips4" 498 else 499 options="$options -mips3" 500 fi 501 OUT="irix-mips3-$CC" 502 ;; 503 mips4-sgi-irix64) 504 echo "WARNING! If you wish to build 64-bit library, then you have to" 505 echo " invoke './Configure irix64-mips4-$CC' *manually*." 506 if [ "$TEST" = "false" ]; then 507 echo " You have about 5 seconds to press Ctrl-C to abort." 508 (stty -icanon min 0 time 50; read waste) < /dev/tty 509 fi 510 CPU=`(hinv -t cpu) 2>/dev/null | head -1 | sed 's/^CPU:[^R]*R\([0-9]*\).*/\1/'` 511 CPU=${CPU:-0} 512 if [ $CPU -ge 5000 ]; then 513 options="$options -mips4" 514 else 515 options="$options -mips3" 516 fi 517 OUT="irix-mips3-$CC" 518 ;; 519 alpha-*-linux2) 520 ISA=`awk '/cpu model/{print$4}' /proc/cpuinfo` 521 case ${ISA:-generic} in 522 *[67]) OUT="linux-alpha+bwx-$CC" ;; 523 *) OUT="linux-alpha-$CC" ;; 524 esac 525 if [ "$CC" = "gcc" ]; then 526 case ${ISA:-generic} in 527 EV5|EV45) options="$options -mcpu=ev5";; 528 EV56|PCA56) options="$options -mcpu=ev56";; 529 EV6|EV67|PCA57) options="$options -mcpu=ev6";; 530 esac 531 fi 532 ;; 533 mips-*-linux?) 534 cat >dummy.c <<EOF 535#include <stdio.h> /* for printf() prototype */ 536 int main (argc, argv) int argc; char *argv[]; { 537#ifdef __MIPSEB__ 538 printf ("linux-%s\n", argv[1]); 539#endif 540#ifdef __MIPSEL__ 541 printf ("linux-%sel\n", argv[1]); 542#endif 543 return 0; 544} 545EOF 546 ${CC} -o dummy dummy.c && OUT=`./dummy ${MACHINE}` 547 rm dummy dummy.c 548 ;; 549 ppc64-*-linux2) 550 #Use the standard target for PPC architecture until we create a 551 #special one for the 64bit architecture. 552 OUT="linux-ppc" ;; 553 ppc-*-linux2) OUT="linux-ppc" ;; 554 m68k-*-linux*) OUT="linux-m68k" ;; 555 ia64-*-linux?) OUT="linux-ia64" ;; 556 ppc-apple-rhapsody) OUT="rhapsody-ppc-cc" ;; 557 ppc-apple-darwin*) OUT="darwin-ppc-cc" ;; 558 i386-apple-darwin*) OUT="darwin-i386-cc" ;; 559 sparc64-*-linux2) 560 echo "WARNING! If you *know* that your GNU C supports 64-bit/V9 ABI" 561 echo " and wish to build 64-bit library, then you have to" 562 echo " invoke './Configure linux64-sparcv9' *manually*." 563 if [ "$TEST" = "false" ]; then 564 echo " You have about 5 seconds to press Ctrl-C to abort." 565 (stty -icanon min 0 time 50; read waste) < /dev/tty 566 fi 567 OUT="linux-sparcv9" ;; 568 sparc-*-linux2) 569 KARCH=`awk '/^type/{print$3}' /proc/cpuinfo` 570 case ${KARCH:-sun4} in 571 sun4u*) OUT="linux-sparcv9" ;; 572 sun4m) OUT="linux-sparcv8" ;; 573 sun4d) OUT="linux-sparcv8" ;; 574 *) OUT="linux-sparcv7" ;; 575 esac ;; 576 parisc-*-linux2) 577 CPUARCH=`awk '/cpu family/{print substr($5,1,3)}' /proc/cpuinfo` 578 CPUSCHEDULE=`awk '/^cpu.[ ]: PA/{print substr($3,3)}' /proc/cpuinfo` 579 580 # ??TODO ?? Model transformations 581 # 0. CPU Architecture for the 1.1 processor has letter suffixes. We strip that off 582 # assuming no further arch. identification will ever be used by GCC. 583 # 1. I'm most concerned about whether is a 7300LC is closer to a 7100 versus a 7100LC. 584 # 2. The variant 64-bit processors cause concern should GCC support explicit schedulers 585 # for these chips in the future. 586 # PA7300LC -> 7100LC (1.1) 587 # PA8200 -> 8000 (2.0) 588 # PA8500 -> 8000 (2.0) 589 # PA8600 -> 8000 (2.0) 590 591 CPUSCHEDULE=`echo $CPUSCHEDULE|sed -e 's/7300LC/7100LC/' -e 's/8?00/8000/'` 592 # Finish Model transformations 593 594 options="$options -mschedule=$CPUSCHEDULE -march=$CPUARCH" 595 OUT="linux-parisc" ;; 596 arm*-*-linux2) OUT="linux-elf-arm" ;; 597 s390-*-linux2) OUT="linux-s390" ;; 598 s390x-*-linux?) OUT="linux-s390x" ;; 599 x86_64-*-linux?) OUT="linux-x86_64" ;; 600 *-*-linux2) OUT="linux-elf" 601 if [ "$GCCVER" -gt 28 ]; then 602 if grep '^model.*Pentium' /proc/cpuinfo >/dev/null ; then 603 OUT="linux-pentium" 604 fi 605 if grep '^model.*Pentium Pro' /proc/cpuinfo >/dev/null ; then 606 OUT="linux-ppro" 607 fi 608 if grep '^model.*K6' /proc/cpuinfo >/dev/null ; then 609 OUT="linux-k6" 610 fi 611 fi ;; 612 *-*-linux1) OUT="linux-aout" ;; 613 sun4u*-*-solaris2) 614 OUT="solaris-sparcv9-$CC" 615 ISA64=`(isalist) 2>/dev/null | grep sparcv9` 616 if [ "$ISA64" != "" ]; then 617 if [ "$CC" = "cc" -a $CCVER -ge 50 ]; then 618 echo "WARNING! If you wish to build 64-bit library, then you have to" 619 echo " invoke './Configure solaris64-sparcv9-cc' *manually*." 620 if [ "$TEST" = "false" ]; then 621 echo " You have about 5 seconds to press Ctrl-C to abort." 622 (stty -icanon min 0 time 50; read waste) < /dev/tty 623 fi 624 elif [ "$CC" = "gcc" -a "$GCC_ARCH" = "-m64" ]; then 625 # $GCC_ARCH denotes default ABI chosen by compiler driver 626 # (first one found on the $PATH). I assume that user 627 # expects certain consistency with the rest of his builds 628 # and therefore switch over to 64-bit. <appro> 629 OUT="solaris64-sparcv9-gcc" 630 echo "WARNING! If you wish to build 32-bit library, then you have to" 631 echo " invoke './Configure solaris-sparcv9-gcc' *manually*." 632 if [ "$TEST" = "false" ]; then 633 echo " You have about 5 seconds to press Ctrl-C to abort." 634 (stty -icanon min 0 time 50; read waste) < /dev/tty 635 fi 636 elif [ "$GCC_ARCH" = "-m32" ]; then 637 echo "NOTICE! If you *know* that your GNU C supports 64-bit/V9 ABI" 638 echo " and wish to build 64-bit library, then you have to" 639 echo " invoke './Configure solaris64-sparcv9-gcc' *manually*." 640 if [ "$TEST" = "false" ]; then 641 echo " You have about 5 seconds to press Ctrl-C to abort." 642 (stty -icanon min 0 time 50; read waste) < /dev/tty 643 fi 644 fi 645 fi 646 ;; 647 sun4m-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 648 sun4d-*-solaris2) OUT="solaris-sparcv8-$CC" ;; 649 sun4*-*-solaris2) OUT="solaris-sparcv7-$CC" ;; 650 *86*-*-solaris2) OUT="solaris-x86-$CC" ;; 651 *-*-sunos4) OUT="sunos-$CC" ;; 652 alpha*-*-freebsd*) OUT="FreeBSD-alpha" ;; 653 sparc64-*-freebsd*) OUT="FreeBSD-sparc64" ;; 654 ia64-*-freebsd*) OUT="FreeBSD-ia64" ;; 655 *-freebsd[3-9]*) OUT="FreeBSD-elf" ;; 656 *-freebsd[1-2]*) OUT="FreeBSD" ;; 657 *86*-*-netbsd) OUT="NetBSD-x86" ;; 658 sun3*-*-netbsd) OUT="NetBSD-m68" ;; 659 *-*-netbsd) OUT="NetBSD-sparc" ;; 660 alpha*-*-openbsd) OUT="OpenBSD-alpha" ;; 661 *86*-*-openbsd) OUT="OpenBSD-i386" ;; 662 m68k*-*-openbsd) OUT="OpenBSD-m68k" ;; 663 m88k*-*-openbsd) OUT="OpenBSD-m88k" ;; 664 mips*-*-openbsd) OUT="OpenBSD-mips" ;; 665 pmax*-*-openbsd) OUT="OpenBSD-mips" ;; 666 powerpc*-*-openbsd) OUT="OpenBSD-powerpc" ;; 667 sparc64*-*-openbsd) OUT="OpenBSD-sparc64" ;; 668 sparc*-*-openbsd) OUT="OpenBSD-sparc" ;; 669 vax*-*-openbsd) OUT="OpenBSD-vax" ;; 670 hppa*-*-openbsd) OUT="OpenBSD-hppa" ;; 671 *-*-openbsd) OUT="OpenBSD" ;; 672 *86*-*-bsdi4) OUT="bsdi-elf-gcc" ;; 673 *-*-osf) OUT="alphaold-cc" ;; 674 *-*-tru64) OUT="alpha-cc" ;; 675 *-*-OpenUNIX*) 676 if [ "$CC" = "gcc" ]; then 677 OUT="OpenUNIX-8-gcc" 678 else 679 OUT="OpenUNIX-8" 680 fi 681 ;; 682 *-*-unixware7) OUT="unixware-7" ;; 683 *-*-UnixWare7) OUT="unixware-7" ;; 684 *-*-Unixware7) OUT="unixware-7" ;; 685 *-*-unixware20*) OUT="unixware-2.0" ;; 686 *-*-unixware21*) OUT="unixware-2.1" ;; 687 *-*-UnixWare20*) OUT="unixware-2.0" ;; 688 *-*-UnixWare21*) OUT="unixware-2.1" ;; 689 *-*-Unixware20*) OUT="unixware-2.0" ;; 690 *-*-Unixware21*) OUT="unixware-2.1" ;; 691 *-*-vos) 692 options="$options no-threads no-shared no-asm no-dso" 693 EXE=".pm" 694 OUT="vos-$CC" ;; 695 BS2000-siemens-sysv4) OUT="BS2000-OSD" ;; 696 RM*-siemens-sysv4) OUT="ReliantUNIX" ;; 697 *-siemens-sysv4) OUT="SINIX" ;; 698 *-hpux1*) 699 if [ $CC = "gcc" ]; 700 then 701 if [ $GCC_BITS = "64" ]; then 702 OUT="hpux64-parisc2-gcc" 703 else 704 OUT="hpux-parisc-gcc" 705 fi 706 else 707 OUT="hpux-parisc-$CC" 708 fi 709 KERNEL_BITS=`(getconf KERNEL_BITS) 2>/dev/null` 710 KERNEL_BITS=${KERNEL_BITS:-32} 711 CPU_VERSION=`(getconf CPU_VERSION) 2>/dev/null` 712 CPU_VERSION=${CPU_VERSION:-0} 713 # See <sys/unistd.h> for further info on CPU_VERSION. 714 if [ $CPU_VERSION -ge 768 ]; then # IA-64 CPU 715 echo "WARNING! 64-bit ABI is the default configured ABI on HP-UXi." 716 echo " If you wish to build 32-bit library, the you have to" 717 echo " invoke './Configure hpux-ia64-cc' *manually*." 718 if [ "$TEST" = "false" ]; then 719 echo " You have about 5 seconds to press Ctrl-C to abort." 720 (stty -icanon min 0 time 50; read waste) < /dev/tty 721 fi 722 OUT="hpux64-ia64-cc" 723 elif [ $CPU_VERSION -ge 532 ]; then # PA-RISC 2.x CPU 724 if [ "$CC" = "cc" ]; then 725 OUT="hpux-parisc2-cc" # can't we have hpux-parisc2-gcc? 726 fi 727 if [ $KERNEL_BITS -eq 64 -a "$CC" = "cc" ]; then 728 echo "WARNING! If you wish to build 64-bit library then you have to" 729 echo " invoke './Configure hpux64-parisc2-cc' *manually*." 730 if [ "$TEST" = "false" ]; then 731 echo " You have about 5 seconds to press Ctrl-C to abort." 732 (stty -icanon min 0 time 50; read waste) < /dev/tty 733 fi 734 fi 735 elif [ $CPU_VERSION -ge 528 ]; then # PA-RISC 1.1+ CPU 736 : 737 elif [ $CPU_VERSION -ge 523 ]; then # PA-RISC 1.0 CPU 738 : 739 else # Motorola(?) CPU 740 OUT="hpux-$CC" 741 fi 742 options="$options -D_REENTRANT" ;; 743 *-hpux) OUT="hpux-parisc-$CC" ;; 744 # these are all covered by the catchall below 745 # *-aix) OUT="aix-$CC" ;; 746 # *-dgux) OUT="dgux" ;; 747 mips-sony-newsos4) OUT="newsos4-gcc" ;; 748 *-*-cygwin_pre1.3) OUT="Cygwin-pre1.3" ;; 749 *-*-cygwin) OUT="Cygwin" ;; 750 t3e-cray-unicosmk) OUT="cray-t3e" ;; 751 j90-cray-unicos) OUT="cray-j90" ;; 752 nsr-tandem-nsk) OUT="tandem-c89" ;; 753 *) OUT=`echo $GUESSOS | awk -F- '{print $3}'`;; 754esac 755 756# NB: This atalla support has been superceded by the ENGINE support 757# That contains its own header and definitions anyway. Support can 758# be enabled or disabled on any supported platform without external 759# headers, eg. by adding the "hw-atalla" switch to ./config or 760# perl Configure 761# 762# See whether we can compile Atalla support 763#if [ -f /usr/include/atasi.h ] 764#then 765# options="$options -DATALLA" 766#fi 767 768# gcc < 2.8 does not support -mcpu=ultrasparc 769if [ "$OUT" = solaris-sparcv9-gcc -a $GCCVER -lt 28 ] 770then 771 echo "WARNING! Do consider upgrading to gcc-2.8 or later." 772 sleep 5 773 OUT=solaris-sparcv9-gcc27 774fi 775if [ "$OUT" = "linux-sparcv9" -a $GCCVER -lt 28 ] 776then 777 echo "WARNING! Falling down to 'linux-sparcv8'." 778 echo " Upgrade to gcc-2.8 or later." 779 sleep 5 780 OUT=linux-sparcv8 781fi 782 783case "$GUESSOS" in 784 i386-*) options="$options 386" ;; 785esac 786 787for i in bf cast des dh dsa ec hmac idea md2 md5 mdc2 rc2 rc4 rc5 aes ripemd rsa sha 788do 789 if [ ! -d crypto/$i ] 790 then 791 options="$options no-$i" 792 fi 793done 794 795# Discover Kerberos 5 (since it's still a prototype, we don't 796# do any guesses yet, that's why this section is commented away. 797#if [ -d /usr/kerberos ]; then 798# krb5_dir=/usr/kerberos 799# if [ \( -f $krb5_dir/lib/libgssapi_krb5.a -o -f $krb5_dir/lib/libgssapi_krb5.so* \)\ 800# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ 801# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ 802# -a \( -f $krb5_dir/lib/libk5crypto.a -o -f $krb5_dir/lib/libk5crypto.so* \)\ 803# -a \( -f $krb5_dir/include/krb5.h \) ]; then 804# options="$options --with-krb5-flavor=MIT" 805# fi 806#elif [ -d /usr/heimdal ]; then 807# krb5_dir=/usr/heimdal 808# if [ \( -f $krb5_dir/lib/libgssapi.a -o -f $krb5_dir/lib/libgssapi.so* \)\ 809# -a \( -f $krb5_dir/lib/libkrb5.a -o -f $krb5_dir/lib/libkrb5.so* \)\ 810# -a \( -f $krb5_dir/lib/libcom_err.a -o -f $krb5_dir/lib/libcom_err.so* \)\ 811# -a \( -f $krb5_dir/include/krb5.h \) ]; then 812# options="$options --with-krb5-flavor=Heimdal" 813# fi 814#fi 815 816if [ -z "$OUT" ]; then 817 OUT="$CC" 818fi 819 820if [ ".$PERL" = . ] ; then 821 for i in . `echo $PATH | sed 's/:/ /g'`; do 822 if [ -f "$i/perl5$EXE" ] ; then 823 PERL="$i/perl5$EXE" 824 break; 825 fi; 826 done 827fi 828 829if [ ".$PERL" = . ] ; then 830 for i in . `echo $PATH | sed 's/:/ /g'`; do 831 if [ -f "$i/perl$EXE" ] ; then 832 if "$i/perl$EXE" -e 'exit($]<5.0)'; then 833 PERL="$i/perl$EXE" 834 break; 835 fi; 836 fi; 837 done 838fi 839 840if [ ".$PERL" = . ] ; then 841 echo "You need Perl 5." 842 exit 1 843fi 844 845# run Configure to check to see if we need to specify the 846# compiler for the platform ... in which case we add it on 847# the end ... otherwise we leave it off 848 849$PERL ./Configure LIST | grep "$OUT-$CC" > /dev/null 850if [ $? = "0" ]; then 851 OUT="$OUT-$CC" 852fi 853 854OUT="$PREFIX$OUT" 855 856$PERL ./Configure LIST | grep "$OUT" > /dev/null 857if [ $? = "0" ]; then 858 echo Configuring for $OUT 859 860 if [ "$TEST" = "true" ]; then 861 echo $PERL ./Configure $OUT $options 862 else 863 $PERL ./Configure $OUT $options 864 fi 865else 866 echo "This system ($OUT) is not supported. See file INSTALL for details." 867fi 868) 869