xref: /freebsd/crypto/openssh/session.c (revision f4b37ed0f8b307b1f3f0f630ca725d68f1dff30d)
1 /* $OpenBSD: session.c,v 1.270 2014/01/31 16:39:19 tedu Exp $ */
2 /* $FreeBSD$ */
3 /*
4  * Copyright (c) 1995 Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland
5  *                    All rights reserved
6  *
7  * As far as I am concerned, the code I have written for this software
8  * can be used freely for any purpose.  Any derived versions of this
9  * software must be clearly marked as such, and if the derived work is
10  * incompatible with the protocol description in the RFC file, it must be
11  * called by a name other than "ssh" or "Secure Shell".
12  *
13  * SSH2 support by Markus Friedl.
14  * Copyright (c) 2000, 2001 Markus Friedl.  All rights reserved.
15  *
16  * Redistribution and use in source and binary forms, with or without
17  * modification, are permitted provided that the following conditions
18  * are met:
19  * 1. Redistributions of source code must retain the above copyright
20  *    notice, this list of conditions and the following disclaimer.
21  * 2. Redistributions in binary form must reproduce the above copyright
22  *    notice, this list of conditions and the following disclaimer in the
23  *    documentation and/or other materials provided with the distribution.
24  *
25  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
26  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
27  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
28  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
29  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
30  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
31  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
32  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
33  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
34  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
35  */
36 
37 #include "includes.h"
38 __RCSID("$FreeBSD$");
39 
40 #include <sys/types.h>
41 #include <sys/param.h>
42 #ifdef HAVE_SYS_STAT_H
43 # include <sys/stat.h>
44 #endif
45 #include <sys/socket.h>
46 #include <sys/un.h>
47 #include <sys/wait.h>
48 
49 #include <arpa/inet.h>
50 
51 #include <errno.h>
52 #include <fcntl.h>
53 #include <grp.h>
54 #ifdef HAVE_PATHS_H
55 #include <paths.h>
56 #endif
57 #include <pwd.h>
58 #include <signal.h>
59 #include <stdarg.h>
60 #include <stdio.h>
61 #include <stdlib.h>
62 #include <string.h>
63 #include <unistd.h>
64 
65 #include "openbsd-compat/sys-queue.h"
66 #include "xmalloc.h"
67 #include "ssh.h"
68 #include "ssh1.h"
69 #include "ssh2.h"
70 #include "sshpty.h"
71 #include "packet.h"
72 #include "buffer.h"
73 #include "match.h"
74 #include "uidswap.h"
75 #include "compat.h"
76 #include "channels.h"
77 #include "key.h"
78 #include "cipher.h"
79 #ifdef GSSAPI
80 #include "ssh-gss.h"
81 #endif
82 #include "hostfile.h"
83 #include "auth.h"
84 #include "auth-options.h"
85 #include "authfd.h"
86 #include "pathnames.h"
87 #include "log.h"
88 #include "servconf.h"
89 #include "sshlogin.h"
90 #include "serverloop.h"
91 #include "canohost.h"
92 #include "misc.h"
93 #include "session.h"
94 #include "kex.h"
95 #include "monitor_wrap.h"
96 #include "sftp.h"
97 
98 #if defined(KRB5) && defined(USE_AFS)
99 #include <kafs.h>
100 #endif
101 
102 #ifdef WITH_SELINUX
103 #include <selinux/selinux.h>
104 #endif
105 
106 #define IS_INTERNAL_SFTP(c) \
107 	(!strncmp(c, INTERNAL_SFTP_NAME, sizeof(INTERNAL_SFTP_NAME) - 1) && \
108 	 (c[sizeof(INTERNAL_SFTP_NAME) - 1] == '\0' || \
109 	  c[sizeof(INTERNAL_SFTP_NAME) - 1] == ' ' || \
110 	  c[sizeof(INTERNAL_SFTP_NAME) - 1] == '\t'))
111 
112 /* func */
113 
114 Session *session_new(void);
115 void	session_set_fds(Session *, int, int, int, int, int);
116 void	session_pty_cleanup(Session *);
117 void	session_proctitle(Session *);
118 int	session_setup_x11fwd(Session *);
119 int	do_exec_pty(Session *, const char *);
120 int	do_exec_no_pty(Session *, const char *);
121 int	do_exec(Session *, const char *);
122 void	do_login(Session *, const char *);
123 #ifdef LOGIN_NEEDS_UTMPX
124 static void	do_pre_login(Session *s);
125 #endif
126 void	do_child(Session *, const char *);
127 void	do_motd(void);
128 int	check_quietlogin(Session *, const char *);
129 
130 static void do_authenticated1(Authctxt *);
131 static void do_authenticated2(Authctxt *);
132 
133 static int session_pty_req(Session *);
134 
135 /* import */
136 extern ServerOptions options;
137 extern char *__progname;
138 extern int log_stderr;
139 extern int debug_flag;
140 extern u_int utmp_len;
141 extern int startup_pipe;
142 extern void destroy_sensitive_data(void);
143 extern Buffer loginmsg;
144 
145 /* original command from peer. */
146 const char *original_command = NULL;
147 
148 /* data */
149 static int sessions_first_unused = -1;
150 static int sessions_nalloc = 0;
151 static Session *sessions = NULL;
152 
153 #define SUBSYSTEM_NONE			0
154 #define SUBSYSTEM_EXT			1
155 #define SUBSYSTEM_INT_SFTP		2
156 #define SUBSYSTEM_INT_SFTP_ERROR	3
157 
158 #ifdef HAVE_LOGIN_CAP
159 login_cap_t *lc;
160 #endif
161 
162 static int is_child = 0;
163 
164 /* Name and directory of socket for authentication agent forwarding. */
165 static char *auth_sock_name = NULL;
166 static char *auth_sock_dir = NULL;
167 
168 /* removes the agent forwarding socket */
169 
170 static void
171 auth_sock_cleanup_proc(struct passwd *pw)
172 {
173 	if (auth_sock_name != NULL) {
174 		temporarily_use_uid(pw);
175 		unlink(auth_sock_name);
176 		rmdir(auth_sock_dir);
177 		auth_sock_name = NULL;
178 		restore_uid();
179 	}
180 }
181 
182 static int
183 auth_input_request_forwarding(struct passwd * pw)
184 {
185 	Channel *nc;
186 	int sock = -1;
187 	struct sockaddr_un sunaddr;
188 
189 	if (auth_sock_name != NULL) {
190 		error("authentication forwarding requested twice.");
191 		return 0;
192 	}
193 
194 	/* Temporarily drop privileged uid for mkdir/bind. */
195 	temporarily_use_uid(pw);
196 
197 	/* Allocate a buffer for the socket name, and format the name. */
198 	auth_sock_dir = xstrdup("/tmp/ssh-XXXXXXXXXX");
199 
200 	/* Create private directory for socket */
201 	if (mkdtemp(auth_sock_dir) == NULL) {
202 		packet_send_debug("Agent forwarding disabled: "
203 		    "mkdtemp() failed: %.100s", strerror(errno));
204 		restore_uid();
205 		free(auth_sock_dir);
206 		auth_sock_dir = NULL;
207 		goto authsock_err;
208 	}
209 
210 	xasprintf(&auth_sock_name, "%s/agent.%ld",
211 	    auth_sock_dir, (long) getpid());
212 
213 	/* Create the socket. */
214 	sock = socket(AF_UNIX, SOCK_STREAM, 0);
215 	if (sock < 0) {
216 		error("socket: %.100s", strerror(errno));
217 		restore_uid();
218 		goto authsock_err;
219 	}
220 
221 	/* Bind it to the name. */
222 	memset(&sunaddr, 0, sizeof(sunaddr));
223 	sunaddr.sun_family = AF_UNIX;
224 	strlcpy(sunaddr.sun_path, auth_sock_name, sizeof(sunaddr.sun_path));
225 
226 	if (bind(sock, (struct sockaddr *)&sunaddr, sizeof(sunaddr)) < 0) {
227 		error("bind: %.100s", strerror(errno));
228 		restore_uid();
229 		goto authsock_err;
230 	}
231 
232 	/* Restore the privileged uid. */
233 	restore_uid();
234 
235 	/* Start listening on the socket. */
236 	if (listen(sock, SSH_LISTEN_BACKLOG) < 0) {
237 		error("listen: %.100s", strerror(errno));
238 		goto authsock_err;
239 	}
240 
241 	/*
242 	 * Allocate a channel for the authentication agent socket.
243 	 * Ignore HPN on that one given no improvement expected.
244 	 */
245 	nc = channel_new("auth socket",
246 	    SSH_CHANNEL_AUTH_SOCKET, sock, sock, -1,
247 	    CHAN_X11_WINDOW_DEFAULT, CHAN_X11_PACKET_DEFAULT,
248 	    0, "auth socket", 1);
249 	nc->path = xstrdup(auth_sock_name);
250 	return 1;
251 
252  authsock_err:
253 	free(auth_sock_name);
254 	if (auth_sock_dir != NULL) {
255 		rmdir(auth_sock_dir);
256 		free(auth_sock_dir);
257 	}
258 	if (sock != -1)
259 		close(sock);
260 	auth_sock_name = NULL;
261 	auth_sock_dir = NULL;
262 	return 0;
263 }
264 
265 static void
266 display_loginmsg(void)
267 {
268 	if (buffer_len(&loginmsg) > 0) {
269 		buffer_append(&loginmsg, "\0", 1);
270 		printf("%s", (char *)buffer_ptr(&loginmsg));
271 		buffer_clear(&loginmsg);
272 	}
273 }
274 
275 void
276 do_authenticated(Authctxt *authctxt)
277 {
278 	setproctitle("%s", authctxt->pw->pw_name);
279 
280 	/* setup the channel layer */
281 	if (no_port_forwarding_flag ||
282 	    (options.allow_tcp_forwarding & FORWARD_LOCAL) == 0)
283 		channel_disable_adm_local_opens();
284 	else
285 		channel_permit_all_opens();
286 
287 	auth_debug_send();
288 
289 	if (compat20)
290 		do_authenticated2(authctxt);
291 	else
292 		do_authenticated1(authctxt);
293 
294 	do_cleanup(authctxt);
295 }
296 
297 /*
298  * Prepares for an interactive session.  This is called after the user has
299  * been successfully authenticated.  During this message exchange, pseudo
300  * terminals are allocated, X11, TCP/IP, and authentication agent forwardings
301  * are requested, etc.
302  */
303 static void
304 do_authenticated1(Authctxt *authctxt)
305 {
306 	Session *s;
307 	char *command;
308 	int success, type, screen_flag;
309 	int enable_compression_after_reply = 0;
310 	u_int proto_len, data_len, dlen, compression_level = 0;
311 
312 	s = session_new();
313 	if (s == NULL) {
314 		error("no more sessions");
315 		return;
316 	}
317 	s->authctxt = authctxt;
318 	s->pw = authctxt->pw;
319 
320 	/*
321 	 * We stay in this loop until the client requests to execute a shell
322 	 * or a command.
323 	 */
324 	for (;;) {
325 		success = 0;
326 
327 		/* Get a packet from the client. */
328 		type = packet_read();
329 
330 		/* Process the packet. */
331 		switch (type) {
332 		case SSH_CMSG_REQUEST_COMPRESSION:
333 			compression_level = packet_get_int();
334 			packet_check_eom();
335 			if (compression_level < 1 || compression_level > 9) {
336 				packet_send_debug("Received invalid compression level %d.",
337 				    compression_level);
338 				break;
339 			}
340 			if (options.compression == COMP_NONE) {
341 				debug2("compression disabled");
342 				break;
343 			}
344 			/* Enable compression after we have responded with SUCCESS. */
345 			enable_compression_after_reply = 1;
346 			success = 1;
347 			break;
348 
349 		case SSH_CMSG_REQUEST_PTY:
350 			success = session_pty_req(s);
351 			break;
352 
353 		case SSH_CMSG_X11_REQUEST_FORWARDING:
354 			s->auth_proto = packet_get_string(&proto_len);
355 			s->auth_data = packet_get_string(&data_len);
356 
357 			screen_flag = packet_get_protocol_flags() &
358 			    SSH_PROTOFLAG_SCREEN_NUMBER;
359 			debug2("SSH_PROTOFLAG_SCREEN_NUMBER: %d", screen_flag);
360 
361 			if (packet_remaining() == 4) {
362 				if (!screen_flag)
363 					debug2("Buggy client: "
364 					    "X11 screen flag missing");
365 				s->screen = packet_get_int();
366 			} else {
367 				s->screen = 0;
368 			}
369 			packet_check_eom();
370 			success = session_setup_x11fwd(s);
371 			if (!success) {
372 				free(s->auth_proto);
373 				free(s->auth_data);
374 				s->auth_proto = NULL;
375 				s->auth_data = NULL;
376 			}
377 			break;
378 
379 		case SSH_CMSG_AGENT_REQUEST_FORWARDING:
380 			if (!options.allow_agent_forwarding ||
381 			    no_agent_forwarding_flag || compat13) {
382 				debug("Authentication agent forwarding not permitted for this authentication.");
383 				break;
384 			}
385 			debug("Received authentication agent forwarding request.");
386 			success = auth_input_request_forwarding(s->pw);
387 			break;
388 
389 		case SSH_CMSG_PORT_FORWARD_REQUEST:
390 			if (no_port_forwarding_flag) {
391 				debug("Port forwarding not permitted for this authentication.");
392 				break;
393 			}
394 			if (!(options.allow_tcp_forwarding & FORWARD_REMOTE)) {
395 				debug("Port forwarding not permitted.");
396 				break;
397 			}
398 			debug("Received TCP/IP port forwarding request.");
399 			if (channel_input_port_forward_request(s->pw->pw_uid == 0,
400 			    options.gateway_ports) < 0) {
401 				debug("Port forwarding failed.");
402 				break;
403 			}
404 			success = 1;
405 			break;
406 
407 		case SSH_CMSG_MAX_PACKET_SIZE:
408 			if (packet_set_maxsize(packet_get_int()) > 0)
409 				success = 1;
410 			break;
411 
412 		case SSH_CMSG_EXEC_SHELL:
413 		case SSH_CMSG_EXEC_CMD:
414 			if (type == SSH_CMSG_EXEC_CMD) {
415 				command = packet_get_string(&dlen);
416 				debug("Exec command '%.500s'", command);
417 				if (do_exec(s, command) != 0)
418 					packet_disconnect(
419 					    "command execution failed");
420 				free(command);
421 			} else {
422 				if (do_exec(s, NULL) != 0)
423 					packet_disconnect(
424 					    "shell execution failed");
425 			}
426 			packet_check_eom();
427 			session_close(s);
428 			return;
429 
430 		default:
431 			/*
432 			 * Any unknown messages in this phase are ignored,
433 			 * and a failure message is returned.
434 			 */
435 			logit("Unknown packet type received after authentication: %d", type);
436 		}
437 		packet_start(success ? SSH_SMSG_SUCCESS : SSH_SMSG_FAILURE);
438 		packet_send();
439 		packet_write_wait();
440 
441 		/* Enable compression now that we have replied if appropriate. */
442 		if (enable_compression_after_reply) {
443 			enable_compression_after_reply = 0;
444 			packet_start_compression(compression_level);
445 		}
446 	}
447 }
448 
449 #define USE_PIPES 1
450 /*
451  * This is called to fork and execute a command when we have no tty.  This
452  * will call do_child from the child, and server_loop from the parent after
453  * setting up file descriptors and such.
454  */
455 int
456 do_exec_no_pty(Session *s, const char *command)
457 {
458 	pid_t pid;
459 
460 #ifdef USE_PIPES
461 	int pin[2], pout[2], perr[2];
462 
463 	if (s == NULL)
464 		fatal("do_exec_no_pty: no session");
465 
466 	/* Allocate pipes for communicating with the program. */
467 	if (pipe(pin) < 0) {
468 		error("%s: pipe in: %.100s", __func__, strerror(errno));
469 		return -1;
470 	}
471 	if (pipe(pout) < 0) {
472 		error("%s: pipe out: %.100s", __func__, strerror(errno));
473 		close(pin[0]);
474 		close(pin[1]);
475 		return -1;
476 	}
477 	if (pipe(perr) < 0) {
478 		error("%s: pipe err: %.100s", __func__,
479 		    strerror(errno));
480 		close(pin[0]);
481 		close(pin[1]);
482 		close(pout[0]);
483 		close(pout[1]);
484 		return -1;
485 	}
486 #else
487 	int inout[2], err[2];
488 
489 	if (s == NULL)
490 		fatal("do_exec_no_pty: no session");
491 
492 	/* Uses socket pairs to communicate with the program. */
493 	if (socketpair(AF_UNIX, SOCK_STREAM, 0, inout) < 0) {
494 		error("%s: socketpair #1: %.100s", __func__, strerror(errno));
495 		return -1;
496 	}
497 	if (socketpair(AF_UNIX, SOCK_STREAM, 0, err) < 0) {
498 		error("%s: socketpair #2: %.100s", __func__,
499 		    strerror(errno));
500 		close(inout[0]);
501 		close(inout[1]);
502 		return -1;
503 	}
504 #endif
505 
506 	session_proctitle(s);
507 
508 	/* Fork the child. */
509 	switch ((pid = fork())) {
510 	case -1:
511 		error("%s: fork: %.100s", __func__, strerror(errno));
512 #ifdef USE_PIPES
513 		close(pin[0]);
514 		close(pin[1]);
515 		close(pout[0]);
516 		close(pout[1]);
517 		close(perr[0]);
518 		close(perr[1]);
519 #else
520 		close(inout[0]);
521 		close(inout[1]);
522 		close(err[0]);
523 		close(err[1]);
524 #endif
525 		return -1;
526 	case 0:
527 		is_child = 1;
528 
529 		/* Child.  Reinitialize the log since the pid has changed. */
530 		log_init(__progname, options.log_level,
531 		    options.log_facility, log_stderr);
532 
533 		/*
534 		 * Create a new session and process group since the 4.4BSD
535 		 * setlogin() affects the entire process group.
536 		 */
537 		if (setsid() < 0)
538 			error("setsid failed: %.100s", strerror(errno));
539 
540 #ifdef USE_PIPES
541 		/*
542 		 * Redirect stdin.  We close the parent side of the socket
543 		 * pair, and make the child side the standard input.
544 		 */
545 		close(pin[1]);
546 		if (dup2(pin[0], 0) < 0)
547 			perror("dup2 stdin");
548 		close(pin[0]);
549 
550 		/* Redirect stdout. */
551 		close(pout[0]);
552 		if (dup2(pout[1], 1) < 0)
553 			perror("dup2 stdout");
554 		close(pout[1]);
555 
556 		/* Redirect stderr. */
557 		close(perr[0]);
558 		if (dup2(perr[1], 2) < 0)
559 			perror("dup2 stderr");
560 		close(perr[1]);
561 #else
562 		/*
563 		 * Redirect stdin, stdout, and stderr.  Stdin and stdout will
564 		 * use the same socket, as some programs (particularly rdist)
565 		 * seem to depend on it.
566 		 */
567 		close(inout[1]);
568 		close(err[1]);
569 		if (dup2(inout[0], 0) < 0)	/* stdin */
570 			perror("dup2 stdin");
571 		if (dup2(inout[0], 1) < 0)	/* stdout (same as stdin) */
572 			perror("dup2 stdout");
573 		close(inout[0]);
574 		if (dup2(err[0], 2) < 0)	/* stderr */
575 			perror("dup2 stderr");
576 		close(err[0]);
577 #endif
578 
579 
580 #ifdef _UNICOS
581 		cray_init_job(s->pw); /* set up cray jid and tmpdir */
582 #endif
583 
584 		/* Do processing for the child (exec command etc). */
585 		do_child(s, command);
586 		/* NOTREACHED */
587 	default:
588 		break;
589 	}
590 
591 #ifdef _UNICOS
592 	signal(WJSIGNAL, cray_job_termination_handler);
593 #endif /* _UNICOS */
594 #ifdef HAVE_CYGWIN
595 	cygwin_set_impersonation_token(INVALID_HANDLE_VALUE);
596 #endif
597 
598 	s->pid = pid;
599 	/* Set interactive/non-interactive mode. */
600 	packet_set_interactive(s->display != NULL,
601 	    options.ip_qos_interactive, options.ip_qos_bulk);
602 
603 	/*
604 	 * Clear loginmsg, since it's the child's responsibility to display
605 	 * it to the user, otherwise multiple sessions may accumulate
606 	 * multiple copies of the login messages.
607 	 */
608 	buffer_clear(&loginmsg);
609 
610 #ifdef USE_PIPES
611 	/* We are the parent.  Close the child sides of the pipes. */
612 	close(pin[0]);
613 	close(pout[1]);
614 	close(perr[1]);
615 
616 	if (compat20) {
617 		session_set_fds(s, pin[1], pout[0], perr[0],
618 		    s->is_subsystem, 0);
619 	} else {
620 		/* Enter the interactive session. */
621 		server_loop(pid, pin[1], pout[0], perr[0]);
622 		/* server_loop has closed pin[1], pout[0], and perr[0]. */
623 	}
624 #else
625 	/* We are the parent.  Close the child sides of the socket pairs. */
626 	close(inout[0]);
627 	close(err[0]);
628 
629 	/*
630 	 * Enter the interactive session.  Note: server_loop must be able to
631 	 * handle the case that fdin and fdout are the same.
632 	 */
633 	if (compat20) {
634 		session_set_fds(s, inout[1], inout[1], err[1],
635 		    s->is_subsystem, 0);
636 	} else {
637 		server_loop(pid, inout[1], inout[1], err[1]);
638 		/* server_loop has closed inout[1] and err[1]. */
639 	}
640 #endif
641 	return 0;
642 }
643 
644 /*
645  * This is called to fork and execute a command when we have a tty.  This
646  * will call do_child from the child, and server_loop from the parent after
647  * setting up file descriptors, controlling tty, updating wtmp, utmp,
648  * lastlog, and other such operations.
649  */
650 int
651 do_exec_pty(Session *s, const char *command)
652 {
653 	int fdout, ptyfd, ttyfd, ptymaster;
654 	pid_t pid;
655 
656 	if (s == NULL)
657 		fatal("do_exec_pty: no session");
658 	ptyfd = s->ptyfd;
659 	ttyfd = s->ttyfd;
660 
661 	/*
662 	 * Create another descriptor of the pty master side for use as the
663 	 * standard input.  We could use the original descriptor, but this
664 	 * simplifies code in server_loop.  The descriptor is bidirectional.
665 	 * Do this before forking (and cleanup in the child) so as to
666 	 * detect and gracefully fail out-of-fd conditions.
667 	 */
668 	if ((fdout = dup(ptyfd)) < 0) {
669 		error("%s: dup #1: %s", __func__, strerror(errno));
670 		close(ttyfd);
671 		close(ptyfd);
672 		return -1;
673 	}
674 	/* we keep a reference to the pty master */
675 	if ((ptymaster = dup(ptyfd)) < 0) {
676 		error("%s: dup #2: %s", __func__, strerror(errno));
677 		close(ttyfd);
678 		close(ptyfd);
679 		close(fdout);
680 		return -1;
681 	}
682 
683 	/* Fork the child. */
684 	switch ((pid = fork())) {
685 	case -1:
686 		error("%s: fork: %.100s", __func__, strerror(errno));
687 		close(fdout);
688 		close(ptymaster);
689 		close(ttyfd);
690 		close(ptyfd);
691 		return -1;
692 	case 0:
693 		is_child = 1;
694 
695 		close(fdout);
696 		close(ptymaster);
697 
698 		/* Child.  Reinitialize the log because the pid has changed. */
699 		log_init(__progname, options.log_level,
700 		    options.log_facility, log_stderr);
701 		/* Close the master side of the pseudo tty. */
702 		close(ptyfd);
703 
704 		/* Make the pseudo tty our controlling tty. */
705 		pty_make_controlling_tty(&ttyfd, s->tty);
706 
707 		/* Redirect stdin/stdout/stderr from the pseudo tty. */
708 		if (dup2(ttyfd, 0) < 0)
709 			error("dup2 stdin: %s", strerror(errno));
710 		if (dup2(ttyfd, 1) < 0)
711 			error("dup2 stdout: %s", strerror(errno));
712 		if (dup2(ttyfd, 2) < 0)
713 			error("dup2 stderr: %s", strerror(errno));
714 
715 		/* Close the extra descriptor for the pseudo tty. */
716 		close(ttyfd);
717 
718 		/* record login, etc. similar to login(1) */
719 #ifndef HAVE_OSF_SIA
720 		if (!(options.use_login && command == NULL)) {
721 #ifdef _UNICOS
722 			cray_init_job(s->pw); /* set up cray jid and tmpdir */
723 #endif /* _UNICOS */
724 			do_login(s, command);
725 		}
726 # ifdef LOGIN_NEEDS_UTMPX
727 		else
728 			do_pre_login(s);
729 # endif
730 #endif
731 		/*
732 		 * Do common processing for the child, such as execing
733 		 * the command.
734 		 */
735 		do_child(s, command);
736 		/* NOTREACHED */
737 	default:
738 		break;
739 	}
740 
741 #ifdef _UNICOS
742 	signal(WJSIGNAL, cray_job_termination_handler);
743 #endif /* _UNICOS */
744 #ifdef HAVE_CYGWIN
745 	cygwin_set_impersonation_token(INVALID_HANDLE_VALUE);
746 #endif
747 
748 	s->pid = pid;
749 
750 	/* Parent.  Close the slave side of the pseudo tty. */
751 	close(ttyfd);
752 
753 	/* Enter interactive session. */
754 	s->ptymaster = ptymaster;
755 	packet_set_interactive(1,
756 	    options.ip_qos_interactive, options.ip_qos_bulk);
757 	if (compat20) {
758 		session_set_fds(s, ptyfd, fdout, -1, 1, 1);
759 	} else {
760 		server_loop(pid, ptyfd, fdout, -1);
761 		/* server_loop _has_ closed ptyfd and fdout. */
762 	}
763 	return 0;
764 }
765 
766 #ifdef LOGIN_NEEDS_UTMPX
767 static void
768 do_pre_login(Session *s)
769 {
770 	socklen_t fromlen;
771 	struct sockaddr_storage from;
772 	pid_t pid = getpid();
773 
774 	/*
775 	 * Get IP address of client. If the connection is not a socket, let
776 	 * the address be 0.0.0.0.
777 	 */
778 	memset(&from, 0, sizeof(from));
779 	fromlen = sizeof(from);
780 	if (packet_connection_is_on_socket()) {
781 		if (getpeername(packet_get_connection_in(),
782 		    (struct sockaddr *)&from, &fromlen) < 0) {
783 			debug("getpeername: %.100s", strerror(errno));
784 			cleanup_exit(255);
785 		}
786 	}
787 
788 	record_utmp_only(pid, s->tty, s->pw->pw_name,
789 	    get_remote_name_or_ip(utmp_len, options.use_dns),
790 	    (struct sockaddr *)&from, fromlen);
791 }
792 #endif
793 
794 /*
795  * This is called to fork and execute a command.  If another command is
796  * to be forced, execute that instead.
797  */
798 int
799 do_exec(Session *s, const char *command)
800 {
801 	int ret;
802 	const char *forced = NULL;
803 	char session_type[1024], *tty = NULL;
804 
805 	if (options.adm_forced_command) {
806 		original_command = command;
807 		command = options.adm_forced_command;
808 		forced = "(config)";
809 	} else if (forced_command) {
810 		original_command = command;
811 		command = forced_command;
812 		forced = "(key-option)";
813 	}
814 	if (forced != NULL) {
815 		if (IS_INTERNAL_SFTP(command)) {
816 			s->is_subsystem = s->is_subsystem ?
817 			    SUBSYSTEM_INT_SFTP : SUBSYSTEM_INT_SFTP_ERROR;
818 		} else if (s->is_subsystem)
819 			s->is_subsystem = SUBSYSTEM_EXT;
820 		snprintf(session_type, sizeof(session_type),
821 		    "forced-command %s '%.900s'", forced, command);
822 	} else if (s->is_subsystem) {
823 		snprintf(session_type, sizeof(session_type),
824 		    "subsystem '%.900s'", s->subsys);
825 	} else if (command == NULL) {
826 		snprintf(session_type, sizeof(session_type), "shell");
827 	} else {
828 		/* NB. we don't log unforced commands to preserve privacy */
829 		snprintf(session_type, sizeof(session_type), "command");
830 	}
831 
832 	if (s->ttyfd != -1) {
833 		tty = s->tty;
834 		if (strncmp(tty, "/dev/", 5) == 0)
835 			tty += 5;
836 	}
837 
838 	verbose("Starting session: %s%s%s for %s from %.200s port %d",
839 	    session_type,
840 	    tty == NULL ? "" : " on ",
841 	    tty == NULL ? "" : tty,
842 	    s->pw->pw_name,
843 	    get_remote_ipaddr(),
844 	    get_remote_port());
845 
846 #ifdef SSH_AUDIT_EVENTS
847 	if (command != NULL)
848 		PRIVSEP(audit_run_command(command));
849 	else if (s->ttyfd == -1) {
850 		char *shell = s->pw->pw_shell;
851 
852 		if (shell[0] == '\0')	/* empty shell means /bin/sh */
853 			shell =_PATH_BSHELL;
854 		PRIVSEP(audit_run_command(shell));
855 	}
856 #endif
857 	if (s->ttyfd != -1)
858 		ret = do_exec_pty(s, command);
859 	else
860 		ret = do_exec_no_pty(s, command);
861 
862 	original_command = NULL;
863 
864 	/*
865 	 * Clear loginmsg: it's the child's responsibility to display
866 	 * it to the user, otherwise multiple sessions may accumulate
867 	 * multiple copies of the login messages.
868 	 */
869 	buffer_clear(&loginmsg);
870 
871 	return ret;
872 }
873 
874 /* administrative, login(1)-like work */
875 void
876 do_login(Session *s, const char *command)
877 {
878 	socklen_t fromlen;
879 	struct sockaddr_storage from;
880 	struct passwd * pw = s->pw;
881 	pid_t pid = getpid();
882 
883 	/*
884 	 * Get IP address of client. If the connection is not a socket, let
885 	 * the address be 0.0.0.0.
886 	 */
887 	memset(&from, 0, sizeof(from));
888 	fromlen = sizeof(from);
889 	if (packet_connection_is_on_socket()) {
890 		if (getpeername(packet_get_connection_in(),
891 		    (struct sockaddr *)&from, &fromlen) < 0) {
892 			debug("getpeername: %.100s", strerror(errno));
893 			cleanup_exit(255);
894 		}
895 	}
896 
897 	/* Record that there was a login on that tty from the remote host. */
898 	if (!use_privsep)
899 		record_login(pid, s->tty, pw->pw_name, pw->pw_uid,
900 		    get_remote_name_or_ip(utmp_len,
901 		    options.use_dns),
902 		    (struct sockaddr *)&from, fromlen);
903 
904 #ifdef USE_PAM
905 	/*
906 	 * If password change is needed, do it now.
907 	 * This needs to occur before the ~/.hushlogin check.
908 	 */
909 	if (options.use_pam && !use_privsep && s->authctxt->force_pwchange) {
910 		display_loginmsg();
911 		do_pam_chauthtok();
912 		s->authctxt->force_pwchange = 0;
913 		/* XXX - signal [net] parent to enable forwardings */
914 	}
915 #endif
916 
917 	if (check_quietlogin(s, command))
918 		return;
919 
920 	display_loginmsg();
921 
922 	do_motd();
923 }
924 
925 /*
926  * Display the message of the day.
927  */
928 void
929 do_motd(void)
930 {
931 	FILE *f;
932 	char buf[256];
933 
934 	if (options.print_motd) {
935 #ifdef HAVE_LOGIN_CAP
936 		f = fopen(login_getcapstr(lc, "welcome", "/etc/motd",
937 		    "/etc/motd"), "r");
938 #else
939 		f = fopen("/etc/motd", "r");
940 #endif
941 		if (f) {
942 			while (fgets(buf, sizeof(buf), f))
943 				fputs(buf, stdout);
944 			fclose(f);
945 		}
946 	}
947 }
948 
949 
950 /*
951  * Check for quiet login, either .hushlogin or command given.
952  */
953 int
954 check_quietlogin(Session *s, const char *command)
955 {
956 	char buf[256];
957 	struct passwd *pw = s->pw;
958 	struct stat st;
959 
960 	/* Return 1 if .hushlogin exists or a command given. */
961 	if (command != NULL)
962 		return 1;
963 	snprintf(buf, sizeof(buf), "%.200s/.hushlogin", pw->pw_dir);
964 #ifdef HAVE_LOGIN_CAP
965 	if (login_getcapbool(lc, "hushlogin", 0) || stat(buf, &st) >= 0)
966 		return 1;
967 #else
968 	if (stat(buf, &st) >= 0)
969 		return 1;
970 #endif
971 	return 0;
972 }
973 
974 /*
975  * Sets the value of the given variable in the environment.  If the variable
976  * already exists, its value is overridden.
977  */
978 void
979 child_set_env(char ***envp, u_int *envsizep, const char *name,
980 	const char *value)
981 {
982 	char **env;
983 	u_int envsize;
984 	u_int i, namelen;
985 
986 	if (strchr(name, '=') != NULL) {
987 		error("Invalid environment variable \"%.100s\"", name);
988 		return;
989 	}
990 
991 	/*
992 	 * If we're passed an uninitialized list, allocate a single null
993 	 * entry before continuing.
994 	 */
995 	if (*envp == NULL && *envsizep == 0) {
996 		*envp = xmalloc(sizeof(char *));
997 		*envp[0] = NULL;
998 		*envsizep = 1;
999 	}
1000 
1001 	/*
1002 	 * Find the slot where the value should be stored.  If the variable
1003 	 * already exists, we reuse the slot; otherwise we append a new slot
1004 	 * at the end of the array, expanding if necessary.
1005 	 */
1006 	env = *envp;
1007 	namelen = strlen(name);
1008 	for (i = 0; env[i]; i++)
1009 		if (strncmp(env[i], name, namelen) == 0 && env[i][namelen] == '=')
1010 			break;
1011 	if (env[i]) {
1012 		/* Reuse the slot. */
1013 		free(env[i]);
1014 	} else {
1015 		/* New variable.  Expand if necessary. */
1016 		envsize = *envsizep;
1017 		if (i >= envsize - 1) {
1018 			if (envsize >= 1000)
1019 				fatal("child_set_env: too many env vars");
1020 			envsize += 50;
1021 			env = (*envp) = xrealloc(env, envsize, sizeof(char *));
1022 			*envsizep = envsize;
1023 		}
1024 		/* Need to set the NULL pointer at end of array beyond the new slot. */
1025 		env[i + 1] = NULL;
1026 	}
1027 
1028 	/* Allocate space and format the variable in the appropriate slot. */
1029 	env[i] = xmalloc(strlen(name) + 1 + strlen(value) + 1);
1030 	snprintf(env[i], strlen(name) + 1 + strlen(value) + 1, "%s=%s", name, value);
1031 }
1032 
1033 /*
1034  * Reads environment variables from the given file and adds/overrides them
1035  * into the environment.  If the file does not exist, this does nothing.
1036  * Otherwise, it must consist of empty lines, comments (line starts with '#')
1037  * and assignments of the form name=value.  No other forms are allowed.
1038  */
1039 static void
1040 read_environment_file(char ***env, u_int *envsize,
1041 	const char *filename)
1042 {
1043 	FILE *f;
1044 	char buf[4096];
1045 	char *cp, *value;
1046 	u_int lineno = 0;
1047 
1048 	f = fopen(filename, "r");
1049 	if (!f)
1050 		return;
1051 
1052 	while (fgets(buf, sizeof(buf), f)) {
1053 		if (++lineno > 1000)
1054 			fatal("Too many lines in environment file %s", filename);
1055 		for (cp = buf; *cp == ' ' || *cp == '\t'; cp++)
1056 			;
1057 		if (!*cp || *cp == '#' || *cp == '\n')
1058 			continue;
1059 
1060 		cp[strcspn(cp, "\n")] = '\0';
1061 
1062 		value = strchr(cp, '=');
1063 		if (value == NULL) {
1064 			fprintf(stderr, "Bad line %u in %.100s\n", lineno,
1065 			    filename);
1066 			continue;
1067 		}
1068 		/*
1069 		 * Replace the equals sign by nul, and advance value to
1070 		 * the value string.
1071 		 */
1072 		*value = '\0';
1073 		value++;
1074 		child_set_env(env, envsize, cp, value);
1075 	}
1076 	fclose(f);
1077 }
1078 
1079 #ifdef HAVE_ETC_DEFAULT_LOGIN
1080 /*
1081  * Return named variable from specified environment, or NULL if not present.
1082  */
1083 static char *
1084 child_get_env(char **env, const char *name)
1085 {
1086 	int i;
1087 	size_t len;
1088 
1089 	len = strlen(name);
1090 	for (i=0; env[i] != NULL; i++)
1091 		if (strncmp(name, env[i], len) == 0 && env[i][len] == '=')
1092 			return(env[i] + len + 1);
1093 	return NULL;
1094 }
1095 
1096 /*
1097  * Read /etc/default/login.
1098  * We pick up the PATH (or SUPATH for root) and UMASK.
1099  */
1100 static void
1101 read_etc_default_login(char ***env, u_int *envsize, uid_t uid)
1102 {
1103 	char **tmpenv = NULL, *var;
1104 	u_int i, tmpenvsize = 0;
1105 	u_long mask;
1106 
1107 	/*
1108 	 * We don't want to copy the whole file to the child's environment,
1109 	 * so we use a temporary environment and copy the variables we're
1110 	 * interested in.
1111 	 */
1112 	read_environment_file(&tmpenv, &tmpenvsize, "/etc/default/login");
1113 
1114 	if (tmpenv == NULL)
1115 		return;
1116 
1117 	if (uid == 0)
1118 		var = child_get_env(tmpenv, "SUPATH");
1119 	else
1120 		var = child_get_env(tmpenv, "PATH");
1121 	if (var != NULL)
1122 		child_set_env(env, envsize, "PATH", var);
1123 
1124 	if ((var = child_get_env(tmpenv, "UMASK")) != NULL)
1125 		if (sscanf(var, "%5lo", &mask) == 1)
1126 			umask((mode_t)mask);
1127 
1128 	for (i = 0; tmpenv[i] != NULL; i++)
1129 		free(tmpenv[i]);
1130 	free(tmpenv);
1131 }
1132 #endif /* HAVE_ETC_DEFAULT_LOGIN */
1133 
1134 void
1135 copy_environment(char **source, char ***env, u_int *envsize)
1136 {
1137 	char *var_name, *var_val;
1138 	int i;
1139 
1140 	if (source == NULL)
1141 		return;
1142 
1143 	for(i = 0; source[i] != NULL; i++) {
1144 		var_name = xstrdup(source[i]);
1145 		if ((var_val = strstr(var_name, "=")) == NULL) {
1146 			free(var_name);
1147 			continue;
1148 		}
1149 		*var_val++ = '\0';
1150 
1151 		debug3("Copy environment: %s=%s", var_name, var_val);
1152 		child_set_env(env, envsize, var_name, var_val);
1153 
1154 		free(var_name);
1155 	}
1156 }
1157 
1158 static char **
1159 do_setup_env(Session *s, const char *shell)
1160 {
1161 	char buf[256];
1162 	u_int i, envsize;
1163 	char **env, *laddr;
1164 	struct passwd *pw = s->pw;
1165 #if !defined (HAVE_LOGIN_CAP) && !defined (HAVE_CYGWIN)
1166 	char *path = NULL;
1167 #else
1168 	extern char **environ;
1169 	char **senv, **var;
1170 #endif
1171 
1172 	/* Initialize the environment. */
1173 	envsize = 100;
1174 	env = xcalloc(envsize, sizeof(char *));
1175 	env[0] = NULL;
1176 
1177 #ifdef HAVE_CYGWIN
1178 	/*
1179 	 * The Windows environment contains some setting which are
1180 	 * important for a running system. They must not be dropped.
1181 	 */
1182 	{
1183 		char **p;
1184 
1185 		p = fetch_windows_environment();
1186 		copy_environment(p, &env, &envsize);
1187 		free_windows_environment(p);
1188 	}
1189 #endif
1190 
1191 	if (getenv("TZ"))
1192 		child_set_env(&env, &envsize, "TZ", getenv("TZ"));
1193 
1194 #ifdef GSSAPI
1195 	/* Allow any GSSAPI methods that we've used to alter
1196 	 * the childs environment as they see fit
1197 	 */
1198 	ssh_gssapi_do_child(&env, &envsize);
1199 #endif
1200 
1201 	if (!options.use_login) {
1202 		/* Set basic environment. */
1203 		for (i = 0; i < s->num_env; i++)
1204 			child_set_env(&env, &envsize, s->env[i].name,
1205 			    s->env[i].val);
1206 
1207 		child_set_env(&env, &envsize, "USER", pw->pw_name);
1208 		child_set_env(&env, &envsize, "LOGNAME", pw->pw_name);
1209 #ifdef _AIX
1210 		child_set_env(&env, &envsize, "LOGIN", pw->pw_name);
1211 #endif
1212 		child_set_env(&env, &envsize, "HOME", pw->pw_dir);
1213 		snprintf(buf, sizeof buf, "%.200s/%.50s",
1214 			 _PATH_MAILDIR, pw->pw_name);
1215 		child_set_env(&env, &envsize, "MAIL", buf);
1216 #ifdef HAVE_LOGIN_CAP
1217 		child_set_env(&env, &envsize, "PATH", _PATH_STDPATH);
1218 		child_set_env(&env, &envsize, "TERM", "su");
1219 		senv = environ;
1220 		environ = xmalloc(sizeof(char *));
1221 		*environ = NULL;
1222 		(void) setusercontext(lc, pw, pw->pw_uid,
1223 		    LOGIN_SETENV|LOGIN_SETPATH);
1224 		copy_environment(environ, &env, &envsize);
1225 		for (var = environ; *var != NULL; ++var)
1226 			free(*var);
1227 		free(environ);
1228 		environ = senv;
1229 #else /* HAVE_LOGIN_CAP */
1230 # ifndef HAVE_CYGWIN
1231 		/*
1232 		 * There's no standard path on Windows. The path contains
1233 		 * important components pointing to the system directories,
1234 		 * needed for loading shared libraries. So the path better
1235 		 * remains intact here.
1236 		 */
1237 #  ifdef HAVE_ETC_DEFAULT_LOGIN
1238 		read_etc_default_login(&env, &envsize, pw->pw_uid);
1239 		path = child_get_env(env, "PATH");
1240 #  endif /* HAVE_ETC_DEFAULT_LOGIN */
1241 		if (path == NULL || *path == '\0') {
1242 			child_set_env(&env, &envsize, "PATH",
1243 			    s->pw->pw_uid == 0 ?
1244 				SUPERUSER_PATH : _PATH_STDPATH);
1245 		}
1246 # endif /* HAVE_CYGWIN */
1247 #endif /* HAVE_LOGIN_CAP */
1248 
1249 		/* Normal systems set SHELL by default. */
1250 		child_set_env(&env, &envsize, "SHELL", shell);
1251 	}
1252 
1253 	/* Set custom environment options from RSA authentication. */
1254 	if (!options.use_login) {
1255 		while (custom_environment) {
1256 			struct envstring *ce = custom_environment;
1257 			char *str = ce->s;
1258 
1259 			for (i = 0; str[i] != '=' && str[i]; i++)
1260 				;
1261 			if (str[i] == '=') {
1262 				str[i] = 0;
1263 				child_set_env(&env, &envsize, str, str + i + 1);
1264 			}
1265 			custom_environment = ce->next;
1266 			free(ce->s);
1267 			free(ce);
1268 		}
1269 	}
1270 
1271 	/* SSH_CLIENT deprecated */
1272 	snprintf(buf, sizeof buf, "%.50s %d %d",
1273 	    get_remote_ipaddr(), get_remote_port(), get_local_port());
1274 	child_set_env(&env, &envsize, "SSH_CLIENT", buf);
1275 
1276 	laddr = get_local_ipaddr(packet_get_connection_in());
1277 	snprintf(buf, sizeof buf, "%.50s %d %.50s %d",
1278 	    get_remote_ipaddr(), get_remote_port(), laddr, get_local_port());
1279 	free(laddr);
1280 	child_set_env(&env, &envsize, "SSH_CONNECTION", buf);
1281 
1282 	if (s->ttyfd != -1)
1283 		child_set_env(&env, &envsize, "SSH_TTY", s->tty);
1284 	if (s->term)
1285 		child_set_env(&env, &envsize, "TERM", s->term);
1286 	if (s->display)
1287 		child_set_env(&env, &envsize, "DISPLAY", s->display);
1288 	if (original_command)
1289 		child_set_env(&env, &envsize, "SSH_ORIGINAL_COMMAND",
1290 		    original_command);
1291 
1292 #ifdef _UNICOS
1293 	if (cray_tmpdir[0] != '\0')
1294 		child_set_env(&env, &envsize, "TMPDIR", cray_tmpdir);
1295 #endif /* _UNICOS */
1296 
1297 	/*
1298 	 * Since we clear KRB5CCNAME at startup, if it's set now then it
1299 	 * must have been set by a native authentication method (eg AIX or
1300 	 * SIA), so copy it to the child.
1301 	 */
1302 	{
1303 		char *cp;
1304 
1305 		if ((cp = getenv("KRB5CCNAME")) != NULL)
1306 			child_set_env(&env, &envsize, "KRB5CCNAME", cp);
1307 	}
1308 
1309 #ifdef _AIX
1310 	{
1311 		char *cp;
1312 
1313 		if ((cp = getenv("AUTHSTATE")) != NULL)
1314 			child_set_env(&env, &envsize, "AUTHSTATE", cp);
1315 		read_environment_file(&env, &envsize, "/etc/environment");
1316 	}
1317 #endif
1318 #ifdef KRB5
1319 	if (s->authctxt->krb5_ccname)
1320 		child_set_env(&env, &envsize, "KRB5CCNAME",
1321 		    s->authctxt->krb5_ccname);
1322 #endif
1323 #ifdef USE_PAM
1324 	/*
1325 	 * Pull in any environment variables that may have
1326 	 * been set by PAM.
1327 	 */
1328 	if (options.use_pam) {
1329 		char **p;
1330 
1331 		p = fetch_pam_child_environment();
1332 		copy_environment(p, &env, &envsize);
1333 		free_pam_environment(p);
1334 
1335 		p = fetch_pam_environment();
1336 		copy_environment(p, &env, &envsize);
1337 		free_pam_environment(p);
1338 	}
1339 #endif /* USE_PAM */
1340 
1341 	if (auth_sock_name != NULL)
1342 		child_set_env(&env, &envsize, SSH_AUTHSOCKET_ENV_NAME,
1343 		    auth_sock_name);
1344 
1345 	/* read $HOME/.ssh/environment. */
1346 	if (options.permit_user_env && !options.use_login) {
1347 		snprintf(buf, sizeof buf, "%.200s/.ssh/environment",
1348 		    strcmp(pw->pw_dir, "/") ? pw->pw_dir : "");
1349 		read_environment_file(&env, &envsize, buf);
1350 	}
1351 	if (debug_flag) {
1352 		/* dump the environment */
1353 		fprintf(stderr, "Environment:\n");
1354 		for (i = 0; env[i]; i++)
1355 			fprintf(stderr, "  %.200s\n", env[i]);
1356 	}
1357 	return env;
1358 }
1359 
1360 /*
1361  * Run $HOME/.ssh/rc, /etc/ssh/sshrc, or xauth (whichever is found
1362  * first in this order).
1363  */
1364 static void
1365 do_rc_files(Session *s, const char *shell)
1366 {
1367 	FILE *f = NULL;
1368 	char cmd[1024];
1369 	int do_xauth;
1370 	struct stat st;
1371 
1372 	do_xauth =
1373 	    s->display != NULL && s->auth_proto != NULL && s->auth_data != NULL;
1374 
1375 	/* ignore _PATH_SSH_USER_RC for subsystems and admin forced commands */
1376 	if (!s->is_subsystem && options.adm_forced_command == NULL &&
1377 	    !no_user_rc && stat(_PATH_SSH_USER_RC, &st) >= 0) {
1378 		snprintf(cmd, sizeof cmd, "%s -c '%s %s'",
1379 		    shell, _PATH_BSHELL, _PATH_SSH_USER_RC);
1380 		if (debug_flag)
1381 			fprintf(stderr, "Running %s\n", cmd);
1382 		f = popen(cmd, "w");
1383 		if (f) {
1384 			if (do_xauth)
1385 				fprintf(f, "%s %s\n", s->auth_proto,
1386 				    s->auth_data);
1387 			pclose(f);
1388 		} else
1389 			fprintf(stderr, "Could not run %s\n",
1390 			    _PATH_SSH_USER_RC);
1391 	} else if (stat(_PATH_SSH_SYSTEM_RC, &st) >= 0) {
1392 		if (debug_flag)
1393 			fprintf(stderr, "Running %s %s\n", _PATH_BSHELL,
1394 			    _PATH_SSH_SYSTEM_RC);
1395 		f = popen(_PATH_BSHELL " " _PATH_SSH_SYSTEM_RC, "w");
1396 		if (f) {
1397 			if (do_xauth)
1398 				fprintf(f, "%s %s\n", s->auth_proto,
1399 				    s->auth_data);
1400 			pclose(f);
1401 		} else
1402 			fprintf(stderr, "Could not run %s\n",
1403 			    _PATH_SSH_SYSTEM_RC);
1404 	} else if (do_xauth && options.xauth_location != NULL) {
1405 		/* Add authority data to .Xauthority if appropriate. */
1406 		if (debug_flag) {
1407 			fprintf(stderr,
1408 			    "Running %.500s remove %.100s\n",
1409 			    options.xauth_location, s->auth_display);
1410 			fprintf(stderr,
1411 			    "%.500s add %.100s %.100s %.100s\n",
1412 			    options.xauth_location, s->auth_display,
1413 			    s->auth_proto, s->auth_data);
1414 		}
1415 		snprintf(cmd, sizeof cmd, "%s -q -",
1416 		    options.xauth_location);
1417 		f = popen(cmd, "w");
1418 		if (f) {
1419 			fprintf(f, "remove %s\n",
1420 			    s->auth_display);
1421 			fprintf(f, "add %s %s %s\n",
1422 			    s->auth_display, s->auth_proto,
1423 			    s->auth_data);
1424 			pclose(f);
1425 		} else {
1426 			fprintf(stderr, "Could not run %s\n",
1427 			    cmd);
1428 		}
1429 	}
1430 }
1431 
1432 static void
1433 do_nologin(struct passwd *pw)
1434 {
1435 	FILE *f = NULL;
1436 	char buf[1024], *nl, *def_nl = _PATH_NOLOGIN;
1437 	struct stat sb;
1438 
1439 #ifdef HAVE_LOGIN_CAP
1440 	if (login_getcapbool(lc, "ignorenologin", 0) || pw->pw_uid == 0)
1441 		return;
1442 	nl = login_getcapstr(lc, "nologin", def_nl, def_nl);
1443 #else
1444 	if (pw->pw_uid == 0)
1445 		return;
1446 	nl = def_nl;
1447 #endif
1448 	if (stat(nl, &sb) == -1) {
1449 		if (nl != def_nl)
1450 			free(nl);
1451 		return;
1452 	}
1453 
1454 	/* /etc/nologin exists.  Print its contents if we can and exit. */
1455 	logit("User %.100s not allowed because %s exists", pw->pw_name, nl);
1456 	if ((f = fopen(nl, "r")) != NULL) {
1457  		while (fgets(buf, sizeof(buf), f))
1458  			fputs(buf, stderr);
1459  		fclose(f);
1460  	}
1461 	exit(254);
1462 }
1463 
1464 /*
1465  * Chroot into a directory after checking it for safety: all path components
1466  * must be root-owned directories with strict permissions.
1467  */
1468 static void
1469 safely_chroot(const char *path, uid_t uid)
1470 {
1471 	const char *cp;
1472 	char component[MAXPATHLEN];
1473 	struct stat st;
1474 
1475 	if (*path != '/')
1476 		fatal("chroot path does not begin at root");
1477 	if (strlen(path) >= sizeof(component))
1478 		fatal("chroot path too long");
1479 
1480 	/*
1481 	 * Descend the path, checking that each component is a
1482 	 * root-owned directory with strict permissions.
1483 	 */
1484 	for (cp = path; cp != NULL;) {
1485 		if ((cp = strchr(cp, '/')) == NULL)
1486 			strlcpy(component, path, sizeof(component));
1487 		else {
1488 			cp++;
1489 			memcpy(component, path, cp - path);
1490 			component[cp - path] = '\0';
1491 		}
1492 
1493 		debug3("%s: checking '%s'", __func__, component);
1494 
1495 		if (stat(component, &st) != 0)
1496 			fatal("%s: stat(\"%s\"): %s", __func__,
1497 			    component, strerror(errno));
1498 		if (st.st_uid != 0 || (st.st_mode & 022) != 0)
1499 			fatal("bad ownership or modes for chroot "
1500 			    "directory %s\"%s\"",
1501 			    cp == NULL ? "" : "component ", component);
1502 		if (!S_ISDIR(st.st_mode))
1503 			fatal("chroot path %s\"%s\" is not a directory",
1504 			    cp == NULL ? "" : "component ", component);
1505 
1506 	}
1507 
1508 	if (chdir(path) == -1)
1509 		fatal("Unable to chdir to chroot path \"%s\": "
1510 		    "%s", path, strerror(errno));
1511 	if (chroot(path) == -1)
1512 		fatal("chroot(\"%s\"): %s", path, strerror(errno));
1513 	if (chdir("/") == -1)
1514 		fatal("%s: chdir(/) after chroot: %s",
1515 		    __func__, strerror(errno));
1516 	verbose("Changed root directory to \"%s\"", path);
1517 }
1518 
1519 /* Set login name, uid, gid, and groups. */
1520 void
1521 do_setusercontext(struct passwd *pw)
1522 {
1523 	char *chroot_path, *tmp;
1524 
1525 	platform_setusercontext(pw);
1526 
1527 	if (platform_privileged_uidswap()) {
1528 #ifdef HAVE_LOGIN_CAP
1529 		if (setusercontext(lc, pw, pw->pw_uid,
1530 		    (LOGIN_SETALL & ~(LOGIN_SETENV|LOGIN_SETPATH|LOGIN_SETUSER))) < 0) {
1531 			perror("unable to set user context");
1532 			exit(1);
1533 		}
1534 #else
1535 		if (setlogin(pw->pw_name) < 0)
1536 			error("setlogin failed: %s", strerror(errno));
1537 		if (setgid(pw->pw_gid) < 0) {
1538 			perror("setgid");
1539 			exit(1);
1540 		}
1541 		/* Initialize the group list. */
1542 		if (initgroups(pw->pw_name, pw->pw_gid) < 0) {
1543 			perror("initgroups");
1544 			exit(1);
1545 		}
1546 		endgrent();
1547 #endif
1548 
1549 		platform_setusercontext_post_groups(pw);
1550 
1551 		if (options.chroot_directory != NULL &&
1552 		    strcasecmp(options.chroot_directory, "none") != 0) {
1553                         tmp = tilde_expand_filename(options.chroot_directory,
1554 			    pw->pw_uid);
1555 			chroot_path = percent_expand(tmp, "h", pw->pw_dir,
1556 			    "u", pw->pw_name, (char *)NULL);
1557 			safely_chroot(chroot_path, pw->pw_uid);
1558 			free(tmp);
1559 			free(chroot_path);
1560 			/* Make sure we don't attempt to chroot again */
1561 			free(options.chroot_directory);
1562 			options.chroot_directory = NULL;
1563 		}
1564 
1565 #ifdef HAVE_LOGIN_CAP
1566 		if (setusercontext(lc, pw, pw->pw_uid, LOGIN_SETUSER) < 0) {
1567 			perror("unable to set user context (setuser)");
1568 			exit(1);
1569 		}
1570 		/*
1571 		 * FreeBSD's setusercontext() will not apply the user's
1572 		 * own umask setting unless running with the user's UID.
1573 		 */
1574 		(void) setusercontext(lc, pw, pw->pw_uid, LOGIN_SETUMASK);
1575 #else
1576 # ifdef USE_LIBIAF
1577 	if (set_id(pw->pw_name) != 0) {
1578 		fatal("set_id(%s) Failed", pw->pw_name);
1579 	}
1580 # endif /* USE_LIBIAF */
1581 		/* Permanently switch to the desired uid. */
1582 		permanently_set_uid(pw);
1583 #endif
1584 	} else if (options.chroot_directory != NULL &&
1585 	    strcasecmp(options.chroot_directory, "none") != 0) {
1586 		fatal("server lacks privileges to chroot to ChrootDirectory");
1587 	}
1588 
1589 	if (getuid() != pw->pw_uid || geteuid() != pw->pw_uid)
1590 		fatal("Failed to set uids to %u.", (u_int) pw->pw_uid);
1591 }
1592 
1593 static void
1594 do_pwchange(Session *s)
1595 {
1596 	fflush(NULL);
1597 	fprintf(stderr, "WARNING: Your password has expired.\n");
1598 	if (s->ttyfd != -1) {
1599 		fprintf(stderr,
1600 		    "You must change your password now and login again!\n");
1601 #ifdef WITH_SELINUX
1602 		setexeccon(NULL);
1603 #endif
1604 #ifdef PASSWD_NEEDS_USERNAME
1605 		execl(_PATH_PASSWD_PROG, "passwd", s->pw->pw_name,
1606 		    (char *)NULL);
1607 #else
1608 		execl(_PATH_PASSWD_PROG, "passwd", (char *)NULL);
1609 #endif
1610 		perror("passwd");
1611 	} else {
1612 		fprintf(stderr,
1613 		    "Password change required but no TTY available.\n");
1614 	}
1615 	exit(1);
1616 }
1617 
1618 static void
1619 launch_login(struct passwd *pw, const char *hostname)
1620 {
1621 	/* Launch login(1). */
1622 
1623 	execl(LOGIN_PROGRAM, "login", "-h", hostname,
1624 #ifdef xxxLOGIN_NEEDS_TERM
1625 		    (s->term ? s->term : "unknown"),
1626 #endif /* LOGIN_NEEDS_TERM */
1627 #ifdef LOGIN_NO_ENDOPT
1628 	    "-p", "-f", pw->pw_name, (char *)NULL);
1629 #else
1630 	    "-p", "-f", "--", pw->pw_name, (char *)NULL);
1631 #endif
1632 
1633 	/* Login couldn't be executed, die. */
1634 
1635 	perror("login");
1636 	exit(1);
1637 }
1638 
1639 static void
1640 child_close_fds(void)
1641 {
1642 	extern AuthenticationConnection *auth_conn;
1643 
1644 	if (auth_conn) {
1645 		ssh_close_authentication_connection(auth_conn);
1646 		auth_conn = NULL;
1647 	}
1648 
1649 	if (packet_get_connection_in() == packet_get_connection_out())
1650 		close(packet_get_connection_in());
1651 	else {
1652 		close(packet_get_connection_in());
1653 		close(packet_get_connection_out());
1654 	}
1655 	/*
1656 	 * Close all descriptors related to channels.  They will still remain
1657 	 * open in the parent.
1658 	 */
1659 	/* XXX better use close-on-exec? -markus */
1660 	channel_close_all();
1661 
1662 	/*
1663 	 * Close any extra file descriptors.  Note that there may still be
1664 	 * descriptors left by system functions.  They will be closed later.
1665 	 */
1666 	endpwent();
1667 
1668 	/*
1669 	 * Close any extra open file descriptors so that we don't have them
1670 	 * hanging around in clients.  Note that we want to do this after
1671 	 * initgroups, because at least on Solaris 2.3 it leaves file
1672 	 * descriptors open.
1673 	 */
1674 	closefrom(STDERR_FILENO + 1);
1675 }
1676 
1677 /*
1678  * Performs common processing for the child, such as setting up the
1679  * environment, closing extra file descriptors, setting the user and group
1680  * ids, and executing the command or shell.
1681  */
1682 #define ARGV_MAX 10
1683 void
1684 do_child(Session *s, const char *command)
1685 {
1686 	extern char **environ;
1687 	char **env;
1688 	char *argv[ARGV_MAX];
1689 	const char *shell, *shell0, *hostname = NULL;
1690 	struct passwd *pw = s->pw;
1691 	int r = 0;
1692 
1693 	/* remove hostkey from the child's memory */
1694 	destroy_sensitive_data();
1695 
1696 	/* Force a password change */
1697 	if (s->authctxt->force_pwchange) {
1698 		do_setusercontext(pw);
1699 		child_close_fds();
1700 		do_pwchange(s);
1701 		exit(1);
1702 	}
1703 
1704 	/* login(1) is only called if we execute the login shell */
1705 	if (options.use_login && command != NULL)
1706 		options.use_login = 0;
1707 
1708 #ifdef _UNICOS
1709 	cray_setup(pw->pw_uid, pw->pw_name, command);
1710 #endif /* _UNICOS */
1711 
1712 	/*
1713 	 * Login(1) does this as well, and it needs uid 0 for the "-h"
1714 	 * switch, so we let login(1) to this for us.
1715 	 */
1716 	if (!options.use_login) {
1717 #ifdef HAVE_OSF_SIA
1718 		session_setup_sia(pw, s->ttyfd == -1 ? NULL : s->tty);
1719 		if (!check_quietlogin(s, command))
1720 			do_motd();
1721 #else /* HAVE_OSF_SIA */
1722 		/* When PAM is enabled we rely on it to do the nologin check */
1723 		if (!options.use_pam)
1724 			do_nologin(pw);
1725 		do_setusercontext(pw);
1726 		/*
1727 		 * PAM session modules in do_setusercontext may have
1728 		 * generated messages, so if this in an interactive
1729 		 * login then display them too.
1730 		 */
1731 		if (!check_quietlogin(s, command))
1732 			display_loginmsg();
1733 #endif /* HAVE_OSF_SIA */
1734 	}
1735 
1736 #ifdef USE_PAM
1737 	if (options.use_pam && !options.use_login && !is_pam_session_open()) {
1738 		debug3("PAM session not opened, exiting");
1739 		display_loginmsg();
1740 		exit(254);
1741 	}
1742 #endif
1743 
1744 	/*
1745 	 * Get the shell from the password data.  An empty shell field is
1746 	 * legal, and means /bin/sh.
1747 	 */
1748 	shell = (pw->pw_shell[0] == '\0') ? _PATH_BSHELL : pw->pw_shell;
1749 
1750 	/*
1751 	 * Make sure $SHELL points to the shell from the password file,
1752 	 * even if shell is overridden from login.conf
1753 	 */
1754 	env = do_setup_env(s, shell);
1755 
1756 #ifdef HAVE_LOGIN_CAP
1757 	shell = login_getcapstr(lc, "shell", (char *)shell, (char *)shell);
1758 #endif
1759 
1760 	/* we have to stash the hostname before we close our socket. */
1761 	if (options.use_login)
1762 		hostname = get_remote_name_or_ip(utmp_len,
1763 		    options.use_dns);
1764 	/*
1765 	 * Close the connection descriptors; note that this is the child, and
1766 	 * the server will still have the socket open, and it is important
1767 	 * that we do not shutdown it.  Note that the descriptors cannot be
1768 	 * closed before building the environment, as we call
1769 	 * get_remote_ipaddr there.
1770 	 */
1771 	child_close_fds();
1772 
1773 	/*
1774 	 * Must take new environment into use so that .ssh/rc,
1775 	 * /etc/ssh/sshrc and xauth are run in the proper environment.
1776 	 */
1777 	environ = env;
1778 
1779 #if defined(KRB5) && defined(USE_AFS)
1780 	/*
1781 	 * At this point, we check to see if AFS is active and if we have
1782 	 * a valid Kerberos 5 TGT. If so, it seems like a good idea to see
1783 	 * if we can (and need to) extend the ticket into an AFS token. If
1784 	 * we don't do this, we run into potential problems if the user's
1785 	 * home directory is in AFS and it's not world-readable.
1786 	 */
1787 
1788 	if (options.kerberos_get_afs_token && k_hasafs() &&
1789 	    (s->authctxt->krb5_ctx != NULL)) {
1790 		char cell[64];
1791 
1792 		debug("Getting AFS token");
1793 
1794 		k_setpag();
1795 
1796 		if (k_afs_cell_of_file(pw->pw_dir, cell, sizeof(cell)) == 0)
1797 			krb5_afslog(s->authctxt->krb5_ctx,
1798 			    s->authctxt->krb5_fwd_ccache, cell, NULL);
1799 
1800 		krb5_afslog_home(s->authctxt->krb5_ctx,
1801 		    s->authctxt->krb5_fwd_ccache, NULL, NULL, pw->pw_dir);
1802 	}
1803 #endif
1804 
1805 	/* Change current directory to the user's home directory. */
1806 	if (chdir(pw->pw_dir) < 0) {
1807 		/* Suppress missing homedir warning for chroot case */
1808 #ifdef HAVE_LOGIN_CAP
1809 		r = login_getcapbool(lc, "requirehome", 0);
1810 #endif
1811 		if (r || options.chroot_directory == NULL ||
1812 		    strcasecmp(options.chroot_directory, "none") == 0)
1813 			fprintf(stderr, "Could not chdir to home "
1814 			    "directory %s: %s\n", pw->pw_dir,
1815 			    strerror(errno));
1816 		if (r)
1817 			exit(1);
1818 	}
1819 
1820 	closefrom(STDERR_FILENO + 1);
1821 
1822 	if (!options.use_login)
1823 		do_rc_files(s, shell);
1824 
1825 	/* restore SIGPIPE for child */
1826 	signal(SIGPIPE, SIG_DFL);
1827 
1828 	if (s->is_subsystem == SUBSYSTEM_INT_SFTP_ERROR) {
1829 		printf("This service allows sftp connections only.\n");
1830 		fflush(NULL);
1831 		exit(1);
1832 	} else if (s->is_subsystem == SUBSYSTEM_INT_SFTP) {
1833 		extern int optind, optreset;
1834 		int i;
1835 		char *p, *args;
1836 
1837 		setproctitle("%s@%s", s->pw->pw_name, INTERNAL_SFTP_NAME);
1838 		args = xstrdup(command ? command : "sftp-server");
1839 		for (i = 0, (p = strtok(args, " ")); p; (p = strtok(NULL, " ")))
1840 			if (i < ARGV_MAX - 1)
1841 				argv[i++] = p;
1842 		argv[i] = NULL;
1843 		optind = optreset = 1;
1844 		__progname = argv[0];
1845 #ifdef WITH_SELINUX
1846 		ssh_selinux_change_context("sftpd_t");
1847 #endif
1848 		exit(sftp_server_main(i, argv, s->pw));
1849 	}
1850 
1851 	fflush(NULL);
1852 
1853 	if (options.use_login) {
1854 		launch_login(pw, hostname);
1855 		/* NEVERREACHED */
1856 	}
1857 
1858 	/* Get the last component of the shell name. */
1859 	if ((shell0 = strrchr(shell, '/')) != NULL)
1860 		shell0++;
1861 	else
1862 		shell0 = shell;
1863 
1864 	/*
1865 	 * If we have no command, execute the shell.  In this case, the shell
1866 	 * name to be passed in argv[0] is preceded by '-' to indicate that
1867 	 * this is a login shell.
1868 	 */
1869 	if (!command) {
1870 		char argv0[256];
1871 
1872 		/* Start the shell.  Set initial character to '-'. */
1873 		argv0[0] = '-';
1874 
1875 		if (strlcpy(argv0 + 1, shell0, sizeof(argv0) - 1)
1876 		    >= sizeof(argv0) - 1) {
1877 			errno = EINVAL;
1878 			perror(shell);
1879 			exit(1);
1880 		}
1881 
1882 		/* Execute the shell. */
1883 		argv[0] = argv0;
1884 		argv[1] = NULL;
1885 		execve(shell, argv, env);
1886 
1887 		/* Executing the shell failed. */
1888 		perror(shell);
1889 		exit(1);
1890 	}
1891 	/*
1892 	 * Execute the command using the user's shell.  This uses the -c
1893 	 * option to execute the command.
1894 	 */
1895 	argv[0] = (char *) shell0;
1896 	argv[1] = "-c";
1897 	argv[2] = (char *) command;
1898 	argv[3] = NULL;
1899 	execve(shell, argv, env);
1900 	perror(shell);
1901 	exit(1);
1902 }
1903 
1904 void
1905 session_unused(int id)
1906 {
1907 	debug3("%s: session id %d unused", __func__, id);
1908 	if (id >= options.max_sessions ||
1909 	    id >= sessions_nalloc) {
1910 		fatal("%s: insane session id %d (max %d nalloc %d)",
1911 		    __func__, id, options.max_sessions, sessions_nalloc);
1912 	}
1913 	memset(&sessions[id], 0, sizeof(*sessions));
1914 	sessions[id].self = id;
1915 	sessions[id].used = 0;
1916 	sessions[id].chanid = -1;
1917 	sessions[id].ptyfd = -1;
1918 	sessions[id].ttyfd = -1;
1919 	sessions[id].ptymaster = -1;
1920 	sessions[id].x11_chanids = NULL;
1921 	sessions[id].next_unused = sessions_first_unused;
1922 	sessions_first_unused = id;
1923 }
1924 
1925 Session *
1926 session_new(void)
1927 {
1928 	Session *s, *tmp;
1929 
1930 	if (sessions_first_unused == -1) {
1931 		if (sessions_nalloc >= options.max_sessions)
1932 			return NULL;
1933 		debug2("%s: allocate (allocated %d max %d)",
1934 		    __func__, sessions_nalloc, options.max_sessions);
1935 		tmp = xrealloc(sessions, sessions_nalloc + 1,
1936 		    sizeof(*sessions));
1937 		if (tmp == NULL) {
1938 			error("%s: cannot allocate %d sessions",
1939 			    __func__, sessions_nalloc + 1);
1940 			return NULL;
1941 		}
1942 		sessions = tmp;
1943 		session_unused(sessions_nalloc++);
1944 	}
1945 
1946 	if (sessions_first_unused >= sessions_nalloc ||
1947 	    sessions_first_unused < 0) {
1948 		fatal("%s: insane first_unused %d max %d nalloc %d",
1949 		    __func__, sessions_first_unused, options.max_sessions,
1950 		    sessions_nalloc);
1951 	}
1952 
1953 	s = &sessions[sessions_first_unused];
1954 	if (s->used) {
1955 		fatal("%s: session %d already used",
1956 		    __func__, sessions_first_unused);
1957 	}
1958 	sessions_first_unused = s->next_unused;
1959 	s->used = 1;
1960 	s->next_unused = -1;
1961 	debug("session_new: session %d", s->self);
1962 
1963 	return s;
1964 }
1965 
1966 static void
1967 session_dump(void)
1968 {
1969 	int i;
1970 	for (i = 0; i < sessions_nalloc; i++) {
1971 		Session *s = &sessions[i];
1972 
1973 		debug("dump: used %d next_unused %d session %d %p "
1974 		    "channel %d pid %ld",
1975 		    s->used,
1976 		    s->next_unused,
1977 		    s->self,
1978 		    s,
1979 		    s->chanid,
1980 		    (long)s->pid);
1981 	}
1982 }
1983 
1984 int
1985 session_open(Authctxt *authctxt, int chanid)
1986 {
1987 	Session *s = session_new();
1988 	debug("session_open: channel %d", chanid);
1989 	if (s == NULL) {
1990 		error("no more sessions");
1991 		return 0;
1992 	}
1993 	s->authctxt = authctxt;
1994 	s->pw = authctxt->pw;
1995 	if (s->pw == NULL || !authctxt->valid)
1996 		fatal("no user for session %d", s->self);
1997 	debug("session_open: session %d: link with channel %d", s->self, chanid);
1998 	s->chanid = chanid;
1999 	return 1;
2000 }
2001 
2002 Session *
2003 session_by_tty(char *tty)
2004 {
2005 	int i;
2006 	for (i = 0; i < sessions_nalloc; i++) {
2007 		Session *s = &sessions[i];
2008 		if (s->used && s->ttyfd != -1 && strcmp(s->tty, tty) == 0) {
2009 			debug("session_by_tty: session %d tty %s", i, tty);
2010 			return s;
2011 		}
2012 	}
2013 	debug("session_by_tty: unknown tty %.100s", tty);
2014 	session_dump();
2015 	return NULL;
2016 }
2017 
2018 static Session *
2019 session_by_channel(int id)
2020 {
2021 	int i;
2022 	for (i = 0; i < sessions_nalloc; i++) {
2023 		Session *s = &sessions[i];
2024 		if (s->used && s->chanid == id) {
2025 			debug("session_by_channel: session %d channel %d",
2026 			    i, id);
2027 			return s;
2028 		}
2029 	}
2030 	debug("session_by_channel: unknown channel %d", id);
2031 	session_dump();
2032 	return NULL;
2033 }
2034 
2035 static Session *
2036 session_by_x11_channel(int id)
2037 {
2038 	int i, j;
2039 
2040 	for (i = 0; i < sessions_nalloc; i++) {
2041 		Session *s = &sessions[i];
2042 
2043 		if (s->x11_chanids == NULL || !s->used)
2044 			continue;
2045 		for (j = 0; s->x11_chanids[j] != -1; j++) {
2046 			if (s->x11_chanids[j] == id) {
2047 				debug("session_by_x11_channel: session %d "
2048 				    "channel %d", s->self, id);
2049 				return s;
2050 			}
2051 		}
2052 	}
2053 	debug("session_by_x11_channel: unknown channel %d", id);
2054 	session_dump();
2055 	return NULL;
2056 }
2057 
2058 static Session *
2059 session_by_pid(pid_t pid)
2060 {
2061 	int i;
2062 	debug("session_by_pid: pid %ld", (long)pid);
2063 	for (i = 0; i < sessions_nalloc; i++) {
2064 		Session *s = &sessions[i];
2065 		if (s->used && s->pid == pid)
2066 			return s;
2067 	}
2068 	error("session_by_pid: unknown pid %ld", (long)pid);
2069 	session_dump();
2070 	return NULL;
2071 }
2072 
2073 static int
2074 session_window_change_req(Session *s)
2075 {
2076 	s->col = packet_get_int();
2077 	s->row = packet_get_int();
2078 	s->xpixel = packet_get_int();
2079 	s->ypixel = packet_get_int();
2080 	packet_check_eom();
2081 	pty_change_window_size(s->ptyfd, s->row, s->col, s->xpixel, s->ypixel);
2082 	return 1;
2083 }
2084 
2085 static int
2086 session_pty_req(Session *s)
2087 {
2088 	u_int len;
2089 	int n_bytes;
2090 
2091 	if (no_pty_flag || !options.permit_tty) {
2092 		debug("Allocating a pty not permitted for this authentication.");
2093 		return 0;
2094 	}
2095 	if (s->ttyfd != -1) {
2096 		packet_disconnect("Protocol error: you already have a pty.");
2097 		return 0;
2098 	}
2099 
2100 	s->term = packet_get_string(&len);
2101 
2102 	if (compat20) {
2103 		s->col = packet_get_int();
2104 		s->row = packet_get_int();
2105 	} else {
2106 		s->row = packet_get_int();
2107 		s->col = packet_get_int();
2108 	}
2109 	s->xpixel = packet_get_int();
2110 	s->ypixel = packet_get_int();
2111 
2112 	if (strcmp(s->term, "") == 0) {
2113 		free(s->term);
2114 		s->term = NULL;
2115 	}
2116 
2117 	/* Allocate a pty and open it. */
2118 	debug("Allocating pty.");
2119 	if (!PRIVSEP(pty_allocate(&s->ptyfd, &s->ttyfd, s->tty,
2120 	    sizeof(s->tty)))) {
2121 		free(s->term);
2122 		s->term = NULL;
2123 		s->ptyfd = -1;
2124 		s->ttyfd = -1;
2125 		error("session_pty_req: session %d alloc failed", s->self);
2126 		return 0;
2127 	}
2128 	debug("session_pty_req: session %d alloc %s", s->self, s->tty);
2129 
2130 	/* for SSH1 the tty modes length is not given */
2131 	if (!compat20)
2132 		n_bytes = packet_remaining();
2133 	tty_parse_modes(s->ttyfd, &n_bytes);
2134 
2135 	if (!use_privsep)
2136 		pty_setowner(s->pw, s->tty);
2137 
2138 	/* Set window size from the packet. */
2139 	pty_change_window_size(s->ptyfd, s->row, s->col, s->xpixel, s->ypixel);
2140 
2141 	packet_check_eom();
2142 	session_proctitle(s);
2143 	return 1;
2144 }
2145 
2146 static int
2147 session_subsystem_req(Session *s)
2148 {
2149 	struct stat st;
2150 	u_int len;
2151 	int success = 0;
2152 	char *prog, *cmd;
2153 	u_int i;
2154 
2155 	s->subsys = packet_get_string(&len);
2156 	packet_check_eom();
2157 	debug2("subsystem request for %.100s by user %s", s->subsys,
2158 	    s->pw->pw_name);
2159 
2160 	for (i = 0; i < options.num_subsystems; i++) {
2161 		if (strcmp(s->subsys, options.subsystem_name[i]) == 0) {
2162 			prog = options.subsystem_command[i];
2163 			cmd = options.subsystem_args[i];
2164 			if (strcmp(INTERNAL_SFTP_NAME, prog) == 0) {
2165 				s->is_subsystem = SUBSYSTEM_INT_SFTP;
2166 				debug("subsystem: %s", prog);
2167 			} else {
2168 				if (stat(prog, &st) < 0)
2169 					debug("subsystem: cannot stat %s: %s",
2170 					    prog, strerror(errno));
2171 				s->is_subsystem = SUBSYSTEM_EXT;
2172 				debug("subsystem: exec() %s", cmd);
2173 			}
2174 			success = do_exec(s, cmd) == 0;
2175 			break;
2176 		}
2177 	}
2178 
2179 	if (!success)
2180 		logit("subsystem request for %.100s by user %s failed, "
2181 		    "subsystem not found", s->subsys, s->pw->pw_name);
2182 
2183 	return success;
2184 }
2185 
2186 static int
2187 session_x11_req(Session *s)
2188 {
2189 	int success;
2190 
2191 	if (s->auth_proto != NULL || s->auth_data != NULL) {
2192 		error("session_x11_req: session %d: "
2193 		    "x11 forwarding already active", s->self);
2194 		return 0;
2195 	}
2196 	s->single_connection = packet_get_char();
2197 	s->auth_proto = packet_get_string(NULL);
2198 	s->auth_data = packet_get_string(NULL);
2199 	s->screen = packet_get_int();
2200 	packet_check_eom();
2201 
2202 	success = session_setup_x11fwd(s);
2203 	if (!success) {
2204 		free(s->auth_proto);
2205 		free(s->auth_data);
2206 		s->auth_proto = NULL;
2207 		s->auth_data = NULL;
2208 	}
2209 	return success;
2210 }
2211 
2212 static int
2213 session_shell_req(Session *s)
2214 {
2215 	packet_check_eom();
2216 	return do_exec(s, NULL) == 0;
2217 }
2218 
2219 static int
2220 session_exec_req(Session *s)
2221 {
2222 	u_int len, success;
2223 
2224 	char *command = packet_get_string(&len);
2225 	packet_check_eom();
2226 	success = do_exec(s, command) == 0;
2227 	free(command);
2228 	return success;
2229 }
2230 
2231 static int
2232 session_break_req(Session *s)
2233 {
2234 
2235 	packet_get_int();	/* ignored */
2236 	packet_check_eom();
2237 
2238 	if (s->ptymaster == -1 || tcsendbreak(s->ptymaster, 0) < 0)
2239 		return 0;
2240 	return 1;
2241 }
2242 
2243 static int
2244 session_env_req(Session *s)
2245 {
2246 	char *name, *val;
2247 	u_int name_len, val_len, i;
2248 
2249 	name = packet_get_cstring(&name_len);
2250 	val = packet_get_cstring(&val_len);
2251 	packet_check_eom();
2252 
2253 	/* Don't set too many environment variables */
2254 	if (s->num_env > 128) {
2255 		debug2("Ignoring env request %s: too many env vars", name);
2256 		goto fail;
2257 	}
2258 
2259 	for (i = 0; i < options.num_accept_env; i++) {
2260 		if (match_pattern(name, options.accept_env[i])) {
2261 			debug2("Setting env %d: %s=%s", s->num_env, name, val);
2262 			s->env = xrealloc(s->env, s->num_env + 1,
2263 			    sizeof(*s->env));
2264 			s->env[s->num_env].name = name;
2265 			s->env[s->num_env].val = val;
2266 			s->num_env++;
2267 			return (1);
2268 		}
2269 	}
2270 	debug2("Ignoring env request %s: disallowed name", name);
2271 
2272  fail:
2273 	free(name);
2274 	free(val);
2275 	return (0);
2276 }
2277 
2278 static int
2279 session_auth_agent_req(Session *s)
2280 {
2281 	static int called = 0;
2282 	packet_check_eom();
2283 	if (no_agent_forwarding_flag || !options.allow_agent_forwarding) {
2284 		debug("session_auth_agent_req: no_agent_forwarding_flag");
2285 		return 0;
2286 	}
2287 	if (called) {
2288 		return 0;
2289 	} else {
2290 		called = 1;
2291 		return auth_input_request_forwarding(s->pw);
2292 	}
2293 }
2294 
2295 int
2296 session_input_channel_req(Channel *c, const char *rtype)
2297 {
2298 	int success = 0;
2299 	Session *s;
2300 
2301 	if ((s = session_by_channel(c->self)) == NULL) {
2302 		logit("session_input_channel_req: no session %d req %.100s",
2303 		    c->self, rtype);
2304 		return 0;
2305 	}
2306 	debug("session_input_channel_req: session %d req %s", s->self, rtype);
2307 
2308 	/*
2309 	 * a session is in LARVAL state until a shell, a command
2310 	 * or a subsystem is executed
2311 	 */
2312 	if (c->type == SSH_CHANNEL_LARVAL) {
2313 		if (strcmp(rtype, "shell") == 0) {
2314 			success = session_shell_req(s);
2315 		} else if (strcmp(rtype, "exec") == 0) {
2316 			success = session_exec_req(s);
2317 		} else if (strcmp(rtype, "pty-req") == 0) {
2318 			success = session_pty_req(s);
2319 		} else if (strcmp(rtype, "x11-req") == 0) {
2320 			success = session_x11_req(s);
2321 		} else if (strcmp(rtype, "auth-agent-req@openssh.com") == 0) {
2322 			success = session_auth_agent_req(s);
2323 		} else if (strcmp(rtype, "subsystem") == 0) {
2324 			success = session_subsystem_req(s);
2325 		} else if (strcmp(rtype, "env") == 0) {
2326 			success = session_env_req(s);
2327 		}
2328 	}
2329 	if (strcmp(rtype, "window-change") == 0) {
2330 		success = session_window_change_req(s);
2331 	} else if (strcmp(rtype, "break") == 0) {
2332 		success = session_break_req(s);
2333 	}
2334 
2335 	return success;
2336 }
2337 
2338 void
2339 session_set_fds(Session *s, int fdin, int fdout, int fderr, int ignore_fderr,
2340     int is_tty)
2341 {
2342 	if (!compat20)
2343 		fatal("session_set_fds: called for proto != 2.0");
2344 	/*
2345 	 * now that have a child and a pipe to the child,
2346 	 * we can activate our channel and register the fd's
2347 	 */
2348 	if (s->chanid == -1)
2349 		fatal("no channel for session %d", s->self);
2350 	if (options.hpn_disabled)
2351 		channel_set_fds(s->chanid, fdout, fdin, fderr,
2352 		    ignore_fderr ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
2353 		    1, is_tty, CHAN_SES_WINDOW_DEFAULT);
2354 	else
2355 		channel_set_fds(s->chanid, fdout, fdin, fderr,
2356 		    ignore_fderr ? CHAN_EXTENDED_IGNORE : CHAN_EXTENDED_READ,
2357 		    1, is_tty, options.hpn_buffer_size);
2358 }
2359 
2360 /*
2361  * Function to perform pty cleanup. Also called if we get aborted abnormally
2362  * (e.g., due to a dropped connection).
2363  */
2364 void
2365 session_pty_cleanup2(Session *s)
2366 {
2367 	if (s == NULL) {
2368 		error("session_pty_cleanup: no session");
2369 		return;
2370 	}
2371 	if (s->ttyfd == -1)
2372 		return;
2373 
2374 	debug("session_pty_cleanup: session %d release %s", s->self, s->tty);
2375 
2376 	/* Record that the user has logged out. */
2377 	if (s->pid != 0)
2378 		record_logout(s->pid, s->tty, s->pw->pw_name);
2379 
2380 	/* Release the pseudo-tty. */
2381 	if (getuid() == 0)
2382 		pty_release(s->tty);
2383 
2384 	/*
2385 	 * Close the server side of the socket pairs.  We must do this after
2386 	 * the pty cleanup, so that another process doesn't get this pty
2387 	 * while we're still cleaning up.
2388 	 */
2389 	if (s->ptymaster != -1 && close(s->ptymaster) < 0)
2390 		error("close(s->ptymaster/%d): %s",
2391 		    s->ptymaster, strerror(errno));
2392 
2393 	/* unlink pty from session */
2394 	s->ttyfd = -1;
2395 }
2396 
2397 void
2398 session_pty_cleanup(Session *s)
2399 {
2400 	PRIVSEP(session_pty_cleanup2(s));
2401 }
2402 
2403 static char *
2404 sig2name(int sig)
2405 {
2406 #define SSH_SIG(x) if (sig == SIG ## x) return #x
2407 	SSH_SIG(ABRT);
2408 	SSH_SIG(ALRM);
2409 	SSH_SIG(FPE);
2410 	SSH_SIG(HUP);
2411 	SSH_SIG(ILL);
2412 	SSH_SIG(INT);
2413 	SSH_SIG(KILL);
2414 	SSH_SIG(PIPE);
2415 	SSH_SIG(QUIT);
2416 	SSH_SIG(SEGV);
2417 	SSH_SIG(TERM);
2418 	SSH_SIG(USR1);
2419 	SSH_SIG(USR2);
2420 #undef	SSH_SIG
2421 	return "SIG@openssh.com";
2422 }
2423 
2424 static void
2425 session_close_x11(int id)
2426 {
2427 	Channel *c;
2428 
2429 	if ((c = channel_by_id(id)) == NULL) {
2430 		debug("session_close_x11: x11 channel %d missing", id);
2431 	} else {
2432 		/* Detach X11 listener */
2433 		debug("session_close_x11: detach x11 channel %d", id);
2434 		channel_cancel_cleanup(id);
2435 		if (c->ostate != CHAN_OUTPUT_CLOSED)
2436 			chan_mark_dead(c);
2437 	}
2438 }
2439 
2440 static void
2441 session_close_single_x11(int id, void *arg)
2442 {
2443 	Session *s;
2444 	u_int i;
2445 
2446 	debug3("session_close_single_x11: channel %d", id);
2447 	channel_cancel_cleanup(id);
2448 	if ((s = session_by_x11_channel(id)) == NULL)
2449 		fatal("session_close_single_x11: no x11 channel %d", id);
2450 	for (i = 0; s->x11_chanids[i] != -1; i++) {
2451 		debug("session_close_single_x11: session %d: "
2452 		    "closing channel %d", s->self, s->x11_chanids[i]);
2453 		/*
2454 		 * The channel "id" is already closing, but make sure we
2455 		 * close all of its siblings.
2456 		 */
2457 		if (s->x11_chanids[i] != id)
2458 			session_close_x11(s->x11_chanids[i]);
2459 	}
2460 	free(s->x11_chanids);
2461 	s->x11_chanids = NULL;
2462 	free(s->display);
2463 	s->display = NULL;
2464 	free(s->auth_proto);
2465 	s->auth_proto = NULL;
2466 	free(s->auth_data);
2467 	s->auth_data = NULL;
2468 	free(s->auth_display);
2469 	s->auth_display = NULL;
2470 }
2471 
2472 static void
2473 session_exit_message(Session *s, int status)
2474 {
2475 	Channel *c;
2476 
2477 	if ((c = channel_lookup(s->chanid)) == NULL)
2478 		fatal("session_exit_message: session %d: no channel %d",
2479 		    s->self, s->chanid);
2480 	debug("session_exit_message: session %d channel %d pid %ld",
2481 	    s->self, s->chanid, (long)s->pid);
2482 
2483 	if (WIFEXITED(status)) {
2484 		channel_request_start(s->chanid, "exit-status", 0);
2485 		packet_put_int(WEXITSTATUS(status));
2486 		packet_send();
2487 	} else if (WIFSIGNALED(status)) {
2488 		channel_request_start(s->chanid, "exit-signal", 0);
2489 		packet_put_cstring(sig2name(WTERMSIG(status)));
2490 #ifdef WCOREDUMP
2491 		packet_put_char(WCOREDUMP(status)? 1 : 0);
2492 #else /* WCOREDUMP */
2493 		packet_put_char(0);
2494 #endif /* WCOREDUMP */
2495 		packet_put_cstring("");
2496 		packet_put_cstring("");
2497 		packet_send();
2498 	} else {
2499 		/* Some weird exit cause.  Just exit. */
2500 		packet_disconnect("wait returned status %04x.", status);
2501 	}
2502 
2503 	/* disconnect channel */
2504 	debug("session_exit_message: release channel %d", s->chanid);
2505 
2506 	/*
2507 	 * Adjust cleanup callback attachment to send close messages when
2508 	 * the channel gets EOF. The session will be then be closed
2509 	 * by session_close_by_channel when the childs close their fds.
2510 	 */
2511 	channel_register_cleanup(c->self, session_close_by_channel, 1);
2512 
2513 	/*
2514 	 * emulate a write failure with 'chan_write_failed', nobody will be
2515 	 * interested in data we write.
2516 	 * Note that we must not call 'chan_read_failed', since there could
2517 	 * be some more data waiting in the pipe.
2518 	 */
2519 	if (c->ostate != CHAN_OUTPUT_CLOSED)
2520 		chan_write_failed(c);
2521 }
2522 
2523 void
2524 session_close(Session *s)
2525 {
2526 	u_int i;
2527 
2528 	debug("session_close: session %d pid %ld", s->self, (long)s->pid);
2529 	if (s->ttyfd != -1)
2530 		session_pty_cleanup(s);
2531 	free(s->term);
2532 	free(s->display);
2533 	free(s->x11_chanids);
2534 	free(s->auth_display);
2535 	free(s->auth_data);
2536 	free(s->auth_proto);
2537 	free(s->subsys);
2538 	if (s->env != NULL) {
2539 		for (i = 0; i < s->num_env; i++) {
2540 			free(s->env[i].name);
2541 			free(s->env[i].val);
2542 		}
2543 		free(s->env);
2544 	}
2545 	session_proctitle(s);
2546 	session_unused(s->self);
2547 }
2548 
2549 void
2550 session_close_by_pid(pid_t pid, int status)
2551 {
2552 	Session *s = session_by_pid(pid);
2553 	if (s == NULL) {
2554 		debug("session_close_by_pid: no session for pid %ld",
2555 		    (long)pid);
2556 		return;
2557 	}
2558 	if (s->chanid != -1)
2559 		session_exit_message(s, status);
2560 	if (s->ttyfd != -1)
2561 		session_pty_cleanup(s);
2562 	s->pid = 0;
2563 }
2564 
2565 /*
2566  * this is called when a channel dies before
2567  * the session 'child' itself dies
2568  */
2569 void
2570 session_close_by_channel(int id, void *arg)
2571 {
2572 	Session *s = session_by_channel(id);
2573 	u_int i;
2574 
2575 	if (s == NULL) {
2576 		debug("session_close_by_channel: no session for id %d", id);
2577 		return;
2578 	}
2579 	debug("session_close_by_channel: channel %d child %ld",
2580 	    id, (long)s->pid);
2581 	if (s->pid != 0) {
2582 		debug("session_close_by_channel: channel %d: has child", id);
2583 		/*
2584 		 * delay detach of session, but release pty, since
2585 		 * the fd's to the child are already closed
2586 		 */
2587 		if (s->ttyfd != -1)
2588 			session_pty_cleanup(s);
2589 		return;
2590 	}
2591 	/* detach by removing callback */
2592 	channel_cancel_cleanup(s->chanid);
2593 
2594 	/* Close any X11 listeners associated with this session */
2595 	if (s->x11_chanids != NULL) {
2596 		for (i = 0; s->x11_chanids[i] != -1; i++) {
2597 			session_close_x11(s->x11_chanids[i]);
2598 			s->x11_chanids[i] = -1;
2599 		}
2600 	}
2601 
2602 	s->chanid = -1;
2603 	session_close(s);
2604 }
2605 
2606 void
2607 session_destroy_all(void (*closefunc)(Session *))
2608 {
2609 	int i;
2610 	for (i = 0; i < sessions_nalloc; i++) {
2611 		Session *s = &sessions[i];
2612 		if (s->used) {
2613 			if (closefunc != NULL)
2614 				closefunc(s);
2615 			else
2616 				session_close(s);
2617 		}
2618 	}
2619 }
2620 
2621 static char *
2622 session_tty_list(void)
2623 {
2624 	static char buf[1024];
2625 	int i;
2626 	char *cp;
2627 
2628 	buf[0] = '\0';
2629 	for (i = 0; i < sessions_nalloc; i++) {
2630 		Session *s = &sessions[i];
2631 		if (s->used && s->ttyfd != -1) {
2632 
2633 			if (strncmp(s->tty, "/dev/", 5) != 0) {
2634 				cp = strrchr(s->tty, '/');
2635 				cp = (cp == NULL) ? s->tty : cp + 1;
2636 			} else
2637 				cp = s->tty + 5;
2638 
2639 			if (buf[0] != '\0')
2640 				strlcat(buf, ",", sizeof buf);
2641 			strlcat(buf, cp, sizeof buf);
2642 		}
2643 	}
2644 	if (buf[0] == '\0')
2645 		strlcpy(buf, "notty", sizeof buf);
2646 	return buf;
2647 }
2648 
2649 void
2650 session_proctitle(Session *s)
2651 {
2652 	if (s->pw == NULL)
2653 		error("no user for session %d", s->self);
2654 	else
2655 		setproctitle("%s@%s", s->pw->pw_name, session_tty_list());
2656 }
2657 
2658 int
2659 session_setup_x11fwd(Session *s)
2660 {
2661 	struct stat st;
2662 	char display[512], auth_display[512];
2663 	char hostname[MAXHOSTNAMELEN];
2664 	u_int i;
2665 
2666 	if (no_x11_forwarding_flag) {
2667 		packet_send_debug("X11 forwarding disabled in user configuration file.");
2668 		return 0;
2669 	}
2670 	if (!options.x11_forwarding) {
2671 		debug("X11 forwarding disabled in server configuration file.");
2672 		return 0;
2673 	}
2674 	if (!options.xauth_location ||
2675 	    (stat(options.xauth_location, &st) == -1)) {
2676 		packet_send_debug("No xauth program; cannot forward with spoofing.");
2677 		return 0;
2678 	}
2679 	if (options.use_login) {
2680 		packet_send_debug("X11 forwarding disabled; "
2681 		    "not compatible with UseLogin=yes.");
2682 		return 0;
2683 	}
2684 	if (s->display != NULL) {
2685 		debug("X11 display already set.");
2686 		return 0;
2687 	}
2688 	if (x11_create_display_inet(options.x11_display_offset,
2689 	    options.x11_use_localhost, s->single_connection,
2690 	    &s->display_number, &s->x11_chanids) == -1) {
2691 		debug("x11_create_display_inet failed.");
2692 		return 0;
2693 	}
2694 	for (i = 0; s->x11_chanids[i] != -1; i++) {
2695 		channel_register_cleanup(s->x11_chanids[i],
2696 		    session_close_single_x11, 0);
2697 	}
2698 
2699 	/* Set up a suitable value for the DISPLAY variable. */
2700 	if (gethostname(hostname, sizeof(hostname)) < 0)
2701 		fatal("gethostname: %.100s", strerror(errno));
2702 	/*
2703 	 * auth_display must be used as the displayname when the
2704 	 * authorization entry is added with xauth(1).  This will be
2705 	 * different than the DISPLAY string for localhost displays.
2706 	 */
2707 	if (options.x11_use_localhost) {
2708 		snprintf(display, sizeof display, "localhost:%u.%u",
2709 		    s->display_number, s->screen);
2710 		snprintf(auth_display, sizeof auth_display, "unix:%u.%u",
2711 		    s->display_number, s->screen);
2712 		s->display = xstrdup(display);
2713 		s->auth_display = xstrdup(auth_display);
2714 	} else {
2715 #ifdef IPADDR_IN_DISPLAY
2716 		struct hostent *he;
2717 		struct in_addr my_addr;
2718 
2719 		he = gethostbyname(hostname);
2720 		if (he == NULL) {
2721 			error("Can't get IP address for X11 DISPLAY.");
2722 			packet_send_debug("Can't get IP address for X11 DISPLAY.");
2723 			return 0;
2724 		}
2725 		memcpy(&my_addr, he->h_addr_list[0], sizeof(struct in_addr));
2726 		snprintf(display, sizeof display, "%.50s:%u.%u", inet_ntoa(my_addr),
2727 		    s->display_number, s->screen);
2728 #else
2729 		snprintf(display, sizeof display, "%.400s:%u.%u", hostname,
2730 		    s->display_number, s->screen);
2731 #endif
2732 		s->display = xstrdup(display);
2733 		s->auth_display = xstrdup(display);
2734 	}
2735 
2736 	return 1;
2737 }
2738 
2739 static void
2740 do_authenticated2(Authctxt *authctxt)
2741 {
2742 	server_loop2(authctxt);
2743 }
2744 
2745 void
2746 do_cleanup(Authctxt *authctxt)
2747 {
2748 	static int called = 0;
2749 
2750 	debug("do_cleanup");
2751 
2752 	/* no cleanup if we're in the child for login shell */
2753 	if (is_child)
2754 		return;
2755 
2756 	/* avoid double cleanup */
2757 	if (called)
2758 		return;
2759 	called = 1;
2760 
2761 	if (authctxt == NULL)
2762 		return;
2763 
2764 #ifdef USE_PAM
2765 	if (options.use_pam) {
2766 		sshpam_cleanup();
2767 		sshpam_thread_cleanup();
2768 	}
2769 #endif
2770 
2771 	if (!authctxt->authenticated)
2772 		return;
2773 
2774 #ifdef KRB5
2775 	if (options.kerberos_ticket_cleanup &&
2776 	    authctxt->krb5_ctx)
2777 		krb5_cleanup_proc(authctxt);
2778 #endif
2779 
2780 #ifdef GSSAPI
2781 	if (compat20 && options.gss_cleanup_creds)
2782 		ssh_gssapi_cleanup_creds();
2783 #endif
2784 
2785 	/* remove agent socket */
2786 	auth_sock_cleanup_proc(authctxt->pw);
2787 
2788 	/*
2789 	 * Cleanup ptys/utmp only if privsep is disabled,
2790 	 * or if running in monitor.
2791 	 */
2792 	if (!use_privsep || mm_is_monitor())
2793 		session_destroy_all(session_pty_cleanup2);
2794 }
2795