xref: /freebsd/crypto/heimdal/doc/Makefile.in (revision 6a068746777241722b2b32c5d0bc443a2a64d80b)

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# $Id$

# $Id$

# $Id$
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(heimdal_TEXINFOS) $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in $(top_srcdir)/Makefile.am.common \
	$(top_srcdir)/cf/Makefile.am.common mdate-sh
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/cf/aix.m4 \
	$(top_srcdir)/cf/auth-modules.m4 \
	$(top_srcdir)/cf/broken-getaddrinfo.m4 \
	$(top_srcdir)/cf/broken-glob.m4 \
	$(top_srcdir)/cf/broken-realloc.m4 \
	$(top_srcdir)/cf/broken-snprintf.m4 $(top_srcdir)/cf/broken.m4 \
	$(top_srcdir)/cf/broken2.m4 $(top_srcdir)/cf/c-attribute.m4 \
	$(top_srcdir)/cf/capabilities.m4 \
	$(top_srcdir)/cf/check-compile-et.m4 \
	$(top_srcdir)/cf/check-getpwnam_r-posix.m4 \
	$(top_srcdir)/cf/check-man.m4 \
	$(top_srcdir)/cf/check-netinet-ip-and-tcp.m4 \
	$(top_srcdir)/cf/check-type-extra.m4 \
	$(top_srcdir)/cf/check-var.m4 $(top_srcdir)/cf/check-x.m4 \
	$(top_srcdir)/cf/check-xau.m4 $(top_srcdir)/cf/crypto.m4 \
	$(top_srcdir)/cf/db.m4 $(top_srcdir)/cf/destdirs.m4 \
	$(top_srcdir)/cf/dispatch.m4 $(top_srcdir)/cf/dlopen.m4 \
	$(top_srcdir)/cf/find-func-no-libs.m4 \
	$(top_srcdir)/cf/find-func-no-libs2.m4 \
	$(top_srcdir)/cf/find-func.m4 \
	$(top_srcdir)/cf/find-if-not-broken.m4 \
	$(top_srcdir)/cf/framework-security.m4 \
	$(top_srcdir)/cf/have-struct-field.m4 \
	$(top_srcdir)/cf/have-type.m4 $(top_srcdir)/cf/irix.m4 \
	$(top_srcdir)/cf/krb-bigendian.m4 \
	$(top_srcdir)/cf/krb-func-getlogin.m4 \
	$(top_srcdir)/cf/krb-ipv6.m4 $(top_srcdir)/cf/krb-prog-ln-s.m4 \
	$(top_srcdir)/cf/krb-readline.m4 \
	$(top_srcdir)/cf/krb-struct-spwd.m4 \
	$(top_srcdir)/cf/krb-struct-winsize.m4 \
	$(top_srcdir)/cf/largefile.m4 $(top_srcdir)/cf/libtool.m4 \
	$(top_srcdir)/cf/ltoptions.m4 $(top_srcdir)/cf/ltsugar.m4 \
	$(top_srcdir)/cf/ltversion.m4 $(top_srcdir)/cf/lt~obsolete.m4 \
	$(top_srcdir)/cf/mips-abi.m4 $(top_srcdir)/cf/misc.m4 \
	$(top_srcdir)/cf/need-proto.m4 $(top_srcdir)/cf/osfc2.m4 \
	$(top_srcdir)/cf/otp.m4 $(top_srcdir)/cf/pkg.m4 \
	$(top_srcdir)/cf/proto-compat.m4 $(top_srcdir)/cf/pthreads.m4 \
	$(top_srcdir)/cf/resolv.m4 $(top_srcdir)/cf/retsigtype.m4 \
	$(top_srcdir)/cf/roken-frag.m4 \
	$(top_srcdir)/cf/socket-wrapper.m4 $(top_srcdir)/cf/sunos.m4 \
	$(top_srcdir)/cf/telnet.m4 $(top_srcdir)/cf/test-package.m4 \
	$(top_srcdir)/cf/version-script.m4 $(top_srcdir)/cf/wflags.m4 \
	$(top_srcdir)/cf/win32.m4 $(top_srcdir)/cf/with-all.m4 \
	$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/include/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/heimdal.info $(srcdir)/hx509.info
am__TEXINFO_TEX_DIR = $(srcdir)
DVIS = heimdal.dvi hx509.dvi
PDFS = heimdal.pdf hx509.pdf
PSS = heimdal.ps hx509.ps
HTMLS = heimdal.html hx509.html
TEXINFOS = heimdal.texi hx509.texi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__installdirs = "$(DESTDIR)$(infodir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@
AMTAR = @AMTAR@
AR = @AR@
ASN1_COMPILE = @ASN1_COMPILE@
ASN1_COMPILE_DEP = @ASN1_COMPILE_DEP@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CANONICAL_HOST = @CANONICAL_HOST@
CAPNG_CFLAGS = @CAPNG_CFLAGS@
CAPNG_LIBS = @CAPNG_LIBS@
CATMAN = @CATMAN@
CATMANEXT = @CATMANEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
COMPILE_ET = @COMPILE_ET@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DBHEADER = @DBHEADER@
DBLIB = @DBLIB@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DIR_com_err = @DIR_com_err@
DIR_hcrypto = @DIR_hcrypto@
DIR_hdbdir = @DIR_hdbdir@
DIR_roken = @DIR_roken@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
GROFF = @GROFF@
INCLUDES_roken = @INCLUDES_roken@
INCLUDE_hcrypto = @INCLUDE_hcrypto@
INCLUDE_hesiod = @INCLUDE_hesiod@
INCLUDE_krb4 = @INCLUDE_krb4@
INCLUDE_libedit = @INCLUDE_libedit@
INCLUDE_libintl = @INCLUDE_libintl@
INCLUDE_openldap = @INCLUDE_openldap@
INCLUDE_readline = @INCLUDE_readline@
INCLUDE_sqlite3 = @INCLUDE_sqlite3@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LDFLAGS_VERSION_SCRIPT = @LDFLAGS_VERSION_SCRIPT@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBADD_roken = @LIBADD_roken@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@
LIB_NDBM = @LIB_NDBM@
LIB_XauFileName = @LIB_XauFileName@
LIB_XauReadAuth = @LIB_XauReadAuth@
LIB_XauWriteAuth = @LIB_XauWriteAuth@
LIB_bswap16 = @LIB_bswap16@
LIB_bswap32 = @LIB_bswap32@
LIB_com_err = @LIB_com_err@
LIB_com_err_a = @LIB_com_err_a@
LIB_com_err_so = @LIB_com_err_so@
LIB_crypt = @LIB_crypt@
LIB_db_create = @LIB_db_create@
LIB_dbm_firstkey = @LIB_dbm_firstkey@
LIB_dbopen = @LIB_dbopen@
LIB_dispatch_async_f = @LIB_dispatch_async_f@
LIB_dlopen = @LIB_dlopen@
LIB_dn_expand = @LIB_dn_expand@
LIB_dns_search = @LIB_dns_search@
LIB_door_create = @LIB_door_create@
LIB_freeaddrinfo = @LIB_freeaddrinfo@
LIB_gai_strerror = @LIB_gai_strerror@
LIB_getaddrinfo = @LIB_getaddrinfo@
LIB_gethostbyname = @LIB_gethostbyname@
LIB_gethostbyname2 = @LIB_gethostbyname2@
LIB_getnameinfo = @LIB_getnameinfo@
LIB_getpwnam_r = @LIB_getpwnam_r@
LIB_getsockopt = @LIB_getsockopt@
LIB_hcrypto = @LIB_hcrypto@
LIB_hcrypto_a = @LIB_hcrypto_a@
LIB_hcrypto_appl = @LIB_hcrypto_appl@
LIB_hcrypto_so = @LIB_hcrypto_so@
LIB_hesiod = @LIB_hesiod@
LIB_hstrerror = @LIB_hstrerror@
LIB_kdb = @LIB_kdb@
LIB_krb4 = @LIB_krb4@
LIB_libedit = @LIB_libedit@
LIB_libintl = @LIB_libintl@
LIB_loadquery = @LIB_loadquery@
LIB_logout = @LIB_logout@
LIB_logwtmp = @LIB_logwtmp@
LIB_openldap = @LIB_openldap@
LIB_openpty = @LIB_openpty@
LIB_otp = @LIB_otp@
LIB_pidfile = @LIB_pidfile@
LIB_readline = @LIB_readline@
LIB_res_ndestroy = @LIB_res_ndestroy@
LIB_res_nsearch = @LIB_res_nsearch@
LIB_res_search = @LIB_res_search@
LIB_roken = @LIB_roken@
LIB_security = @LIB_security@
LIB_setsockopt = @LIB_setsockopt@
LIB_socket = @LIB_socket@
LIB_sqlite3 = @LIB_sqlite3@
LIB_syslog = @LIB_syslog@
LIB_tgetent = @LIB_tgetent@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NO_AFS = @NO_AFS@
NROFF = @NROFF@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LDADD = @PTHREAD_LDADD@
PTHREAD_LIBADD = @PTHREAD_LIBADD@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SLC = @SLC@
SLC_DEP = @SLC_DEP@
STRIP = @STRIP@
VERSION = @VERSION@
VERSIONING = @VERSIONING@
WFLAGS = @WFLAGS@
WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@
WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@
XMKMF = @XMKMF@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dpagaix_cflags = @dpagaix_cflags@
dpagaix_ldadd = @dpagaix_ldadd@
dpagaix_ldflags = @dpagaix_ldflags@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUFFIXES = .et .h .x .z .hx .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -I$(top_srcdir)/include
AM_CPPFLAGS = $(INCLUDES_roken)
@do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME
AM_CFLAGS = $(WFLAGS)
CP = cp
buildinclude = $(top_builddir)/include
LIB_el_init = @LIB_el_init@
LIB_getattr = @LIB_getattr@
LIB_getpwent_r = @LIB_getpwent_r@
LIB_odm_initialize = @LIB_odm_initialize@
LIB_setpcred = @LIB_setpcred@
HESIODLIB = @HESIODLIB@
HESIODINCLUDE = @HESIODINCLUDE@
libexec_heimdaldir = $(libexecdir)/heimdal
NROFF_MAN = groff -mandoc -Tascii
LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS)
@KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \
@KRB5_TRUE@	$(top_builddir)/lib/asn1/libasn1.la

@KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la
LIB_heimbase = $(top_builddir)/base/libheimbase.la
@DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la
AUTOMAKE_OPTIONS = no-texinfo.tex
MAKEINFOFLAGS = --css-include=$(srcdir)/heimdal.css
TEXI2DVI = true # ARGH, make distcheck can't be disabled to not build dvifiles
info_TEXINFOS = heimdal.texi hx509.texi
dxy_subst = sed -e 's,[@]srcdir[@],$(srcdir),g' \
	-e 's,[@]objdir[@],.,g' \
	-e 's,[@]PACKAGE_VERSION[@],$(PACKAGE_VERSION),g'

texi_subst = sed -e 's,[@]dbdir[@],$(localstatedir),g' \
	-e 's,[@]PACKAGE_VERSION[@],$(PACKAGE_VERSION),g'

PROJECTS = hcrypto hdb hx509 gssapi krb5 ntlm wind
heimdal_TEXINFOS = \
	ack.texi \
	apps.texi \
	copyright.texi \
	heimdal.texi \
	install.texi \
	intro.texi \
	kerberos4.texi \
	migration.texi \
	misc.texi \
	programming.texi \
	setup.texi \
	vars.texi \
	whatis.texi \
	win2k.texi

EXTRA_DIST = \
	NTMakefile \
	doxyout \
	footer.html \
	gssapi.din \
	hdb.din \
	hcrypto.din \
	header.html \
	heimdal.css \
	hx509.din \
	krb5.din \
	ntlm.din \
	init-creds \
	latin1.tex \
	layman.asc \
	doxytmpl.dxy \
	wind.din \
	vars.tin

CLEANFILES = \
	hcrypto.dxy* \
	hx509.dxy* \
	hdb.dxy* \
	gssapi.dxy* \
	krb5.dxy* \
	ntlm.dxy* \
	wind.dxy* \
	vars.texi*

all: all-am

.SUFFIXES:
.SUFFIXES: .et .h .x .z .hx .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

.texi.info:
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ $<; \
	then \
	  rc=0; \
	  $(am__cd) $(srcdir); \
	else \
	  rc=$$?; \
	  $(am__cd) $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

.texi.dvi:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) $<

.texi.pdf:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) $<

.texi.html:
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) $<; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
$(srcdir)/heimdal.info: heimdal.texi $(heimdal_TEXINFOS)
heimdal.dvi: heimdal.texi $(heimdal_TEXINFOS)
heimdal.pdf: heimdal.texi $(heimdal_TEXINFOS)
heimdal.html: heimdal.texi $(heimdal_TEXINFOS)
$(srcdir)/hx509.info: hx509.texi
hx509.dvi: hx509.texi
hx509.pdf: hx509.texi
hx509.html: hx509.texi
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && \
	    (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf heimdal.aux heimdal.cp heimdal.cps heimdal.fn heimdal.fns \
	  heimdal.ky heimdal.kys heimdal.log heimdal.pg heimdal.tmp \
	  heimdal.toc heimdal.tp heimdal.tps heimdal.vr heimdal.vrs \
	  hx509.aux hx509.cp hx509.cps hx509.fn hx509.fns hx509.ky \
	  hx509.kys hx509.log hx509.pg hx509.tmp hx509.toc hx509.tp \
	  hx509.tps hx509.vr hx509.vrs

clean-aminfo:
	-test -z "heimdal.dvi heimdal.pdf heimdal.ps heimdal.html hx509.dvi hx509.pdf \
	  hx509.ps hx509.html" \
	|| rm -rf heimdal.dvi heimdal.pdf heimdal.ps heimdal.html hx509.dvi hx509.pdf \
	  hx509.ps hx509.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info dist-hook
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-am
all-am: Makefile $(INFO_DEPS) all-local
installdirs:
	for dir in "$(DESTDIR)$(infodir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done
install-exec-am:
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-am

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
	  if test -d "$$d$$p"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d$$p"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }
install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man:

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-pdf-am uninstall-ps-am
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: check-am install-am install-data-am install-exec-am \
	install-strip uninstall-am

.PHONY: all all-am all-local check check-am check-local clean \
	clean-aminfo clean-generic clean-libtool dist-hook dist-info \
	distclean distclean-generic distclean-libtool distdir dvi \
	dvi-am html html-am info info-am install install-am \
	install-data install-data-am install-data-hook install-dvi \
	install-dvi-am install-exec install-exec-am install-exec-hook \
	install-html install-html-am install-info install-info-am \
	install-man install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic mostlyclean mostlyclean-aminfo \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	uninstall uninstall-am uninstall-dvi-am uninstall-hook \
	uninstall-html-am uninstall-info-am uninstall-pdf-am \
	uninstall-ps-am


install-suid-programs:
	@foo='$(bin_SUIDS)'; \
	for file in $$foo; do \
	x=$(DESTDIR)$(bindir)/$$file; \
	if chown 0:0 $$x && chmod u+s $$x; then :; else \
	echo "*"; \
	echo "* Failed to install $$x setuid root"; \
	echo "*"; \
	fi; done

install-exec-hook: install-suid-programs

install-build-headers:: $(include_HEADERS) $(dist_include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ) $(nobase_include_HEADERS)
	@foo='$(include_HEADERS) $(dist_include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \
	for f in $$foo; do \
		f=`basename $$f`; \
		if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \
		else file="$$f"; fi; \
		if cmp -s  $$file $(buildinclude)/$$f 2> /dev/null ; then \
		: ; else \
			echo " $(CP) $$file $(buildinclude)/$$f"; \
			$(CP) $$file $(buildinclude)/$$f; \
		fi ; \
	done ; \
	foo='$(nobase_include_HEADERS)'; \
	for f in $$foo; do \
		if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \
		else file="$$f"; fi; \
		$(mkdir_p) $(buildinclude)/`dirname $$f` ; \
		if cmp -s  $$file $(buildinclude)/$$f 2> /dev/null ; then \
		: ; else \
			echo " $(CP) $$file $(buildinclude)/$$f"; \
			$(CP) $$file $(buildinclude)/$$f; \
		fi ; \
	done

all-local: install-build-headers

check-local::
	@if test '$(CHECK_LOCAL)' = "no-check-local"; then \
	  foo=''; elif test '$(CHECK_LOCAL)'; then \
	  foo='$(CHECK_LOCAL)'; else \
	  foo='$(PROGRAMS)'; fi; \
	  if test "$$foo"; then \
	  failed=0; all=0; \
	  for i in $$foo; do \
	    all=`expr $$all + 1`; \
	    if (./$$i --version && ./$$i --help) > /dev/null 2>&1; then \
	      echo "PASS: $$i"; \
	    else \
	      echo "FAIL: $$i"; \
	      failed=`expr $$failed + 1`; \
	    fi; \
	  done; \
	  if test "$$failed" -eq 0; then \
	    banner="All $$all tests passed"; \
	  else \
	    banner="$$failed of $$all tests failed"; \
	  fi; \
	  dashes=`echo "$$banner" | sed s/./=/g`; \
	  echo "$$dashes"; \
	  echo "$$banner"; \
	  echo "$$dashes"; \
	  test "$$failed" -eq 0 || exit 1; \
	fi

.x.c:
	@cmp -s $< $@ 2> /dev/null || cp $< $@

.hx.h:
	@cmp -s $< $@ 2> /dev/null || cp $< $@
#NROFF_MAN = nroff -man
.1.cat1:
	$(NROFF_MAN) $< > $@
.3.cat3:
	$(NROFF_MAN) $< > $@
.5.cat5:
	$(NROFF_MAN) $< > $@
.8.cat8:
	$(NROFF_MAN) $< > $@

dist-cat1-mans:
	@foo='$(man1_MANS)'; \
	bar='$(man_MANS)'; \
	for i in $$bar; do \
	case $$i in \
	*.1) foo="$$foo $$i";; \
	esac; done ;\
	for i in $$foo; do \
		x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \
		echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
		$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
	done

dist-cat3-mans:
	@foo='$(man3_MANS)'; \
	bar='$(man_MANS)'; \
	for i in $$bar; do \
	case $$i in \
	*.3) foo="$$foo $$i";; \
	esac; done ;\
	for i in $$foo; do \
		x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \
		echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
		$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
	done

dist-cat5-mans:
	@foo='$(man5_MANS)'; \
	bar='$(man_MANS)'; \
	for i in $$bar; do \
	case $$i in \
	*.5) foo="$$foo $$i";; \
	esac; done ;\
	for i in $$foo; do \
		x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \
		echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
		$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
	done

dist-cat8-mans:
	@foo='$(man8_MANS)'; \
	bar='$(man_MANS)'; \
	for i in $$bar; do \
	case $$i in \
	*.8) foo="$$foo $$i";; \
	esac; done ;\
	for i in $$foo; do \
		x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \
		echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
		$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
	done

dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans

install-cat-mans:
	$(SHELL) $(top_srcdir)/cf/install-catman.sh install "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS)

uninstall-cat-mans:
	$(SHELL) $(top_srcdir)/cf/install-catman.sh uninstall "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS)

install-data-hook: install-cat-mans
uninstall-hook: uninstall-cat-mans

.et.h:
	$(COMPILE_ET) $<
.et.c:
	$(COMPILE_ET) $<

#
# Useful target for debugging
#

check-valgrind:
	tobjdir=`cd $(top_builddir) && pwd` ; \
	tsrcdir=`cd $(top_srcdir) && pwd` ; \
	env TESTS_ENVIRONMENT="$${tsrcdir}/cf/maybe-valgrind.sh -s $${tsrcdir} -o $${tobjdir}" make check

#
# Target to please samba build farm, builds distfiles in-tree.
# Will break when automake changes...
#

distdir-in-tree: $(DISTFILES) $(INFO_DEPS)
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" != .; then \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) distdir-in-tree) ; \
	  fi ; \
	done

hcrypto.dxy: hcrypto.din Makefile
	$(dxy_subst) < $(srcdir)/hcrypto.din > hcrypto.dxy.tmp
	chmod +x hcrypto.dxy.tmp
	mv hcrypto.dxy.tmp hcrypto.dxy

hdb.dxy: hdb.din Makefile
	$(dxy_subst) < $(srcdir)/hdb.din > hdb.dxy.tmp
	chmod +x hdb.dxy.tmp
	mv hdb.dxy.tmp hdb.dxy

hx509.dxy: hx509.din Makefile
	$(dxy_subst) < $(srcdir)/hx509.din > hx509.dxy.tmp
	chmod +x hx509.dxy.tmp
	mv hx509.dxy.tmp hx509.dxy

gssapi.dxy: gssapi.din Makefile
	$(dxy_subst) < $(srcdir)/gssapi.din > gssapi.dxy.tmp
	chmod +x gssapi.dxy.tmp
	mv gssapi.dxy.tmp gssapi.dxy

krb5.dxy: krb5.din Makefile
	$(dxy_subst) < $(srcdir)/krb5.din > krb5.dxy.tmp
	chmod +x krb5.dxy.tmp
	mv krb5.dxy.tmp krb5.dxy

ntlm.dxy: ntlm.din Makefile
	$(dxy_subst) < $(srcdir)/ntlm.din > ntlm.dxy.tmp
	chmod +x ntlm.dxy.tmp
	mv ntlm.dxy.tmp ntlm.dxy

wind.dxy: wind.din Makefile
	$(dxy_subst) < $(srcdir)/wind.din > wind.dxy.tmp
	chmod +x wind.dxy.tmp
	mv wind.dxy.tmp wind.dxy

vars.texi: vars.tin Makefile
	$(texi_subst) < $(srcdir)/vars.tin > vars.texi.tmp
	chmod +x vars.texi.tmp
	mv vars.texi.tmp vars.texi

doxyout doxygen: hdb.dxy hx509.dxy hcrypto.dxy gssapi.dxy krb5.dxy ntlm.dxy wind.dxy
	@find $(srcdir)/doxyout -type d ! -perm -200 -exec chmod u+w {} ';' ; \
	rm -rf $(srcdir)/doxyout ; \
	mkdir $(srcdir)/doxyout ; \
	for a in $(PROJECTS) ; do \
		echo $$a ; \
		doxygen $$a.dxy; \
		(cd $(srcdir)/doxyout && find $$a/man -type f > $$a/manpages ) ; \
	done

install-data-hook: install-doxygen-manpage
uninstall-hook: uninstall-doxygen-manpage
dist-hook: doxygen

install-doxygen-manpage:
	for a in $(PROJECTS) ; do \
		f="$(srcdir)/doxyout/$$a/manpages" ; \
		test -f $$f || continue ; \
		echo "install $$a manual pages $$(wc -l < $$f)" ; \
		while read x ; do \
			section=`echo "$$x" | sed 's/.*\.\([0-9]\)/\1/'` ; \
			$(mkinstalldirs) "$(DESTDIR)$(mandir)/man$$section" ; \
			$(INSTALL_DATA) $(srcdir)/doxyout/$$x "$(DESTDIR)$(mandir)/man$$section" ; \
		done < $$f ; \
	done ; exit 0

uninstall-doxygen-manpage:
	@for a in $(PROJECTS) ; do \
		f="$(srcdir)/doxyout/$$a/manpages" ; \
		test -f $$f || continue ; \
		echo "removing $$a manual pages" ; \
		while read x ; do \
			section=`echo "$$x" | sed 's/.*\.\([0-9]\)/\1/'` ; \
			base=`basename $$x` ; \
			rm "$(DESTDIR)$(mandir)/man$$section/$$base" ; \
		done < $$f ; \
	done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: