1 /* 2 * EAP peer state machines (RFC 4137) 3 * Copyright (c) 2004-2014, Jouni Malinen <j@w1.fi> 4 * 5 * This software may be distributed under the terms of the BSD license. 6 * See README for more details. 7 * 8 * This file implements the Peer State Machine as defined in RFC 4137. The used 9 * states and state transitions match mostly with the RFC. However, there are 10 * couple of additional transitions for working around small issues noticed 11 * during testing. These exceptions are explained in comments within the 12 * functions in this file. The method functions, m.func(), are similar to the 13 * ones used in RFC 4137, but some small changes have used here to optimize 14 * operations and to add functionality needed for fast re-authentication 15 * (session resumption). 16 */ 17 18 #include "includes.h" 19 20 #include "common.h" 21 #include "pcsc_funcs.h" 22 #include "state_machine.h" 23 #include "ext_password.h" 24 #include "crypto/crypto.h" 25 #include "crypto/tls.h" 26 #include "crypto/sha256.h" 27 #include "common/wpa_ctrl.h" 28 #include "eap_common/eap_wsc_common.h" 29 #include "eap_i.h" 30 #include "eap_config.h" 31 32 #define STATE_MACHINE_DATA struct eap_sm 33 #define STATE_MACHINE_DEBUG_PREFIX "EAP" 34 35 #define EAP_MAX_AUTH_ROUNDS 50 36 #define EAP_CLIENT_TIMEOUT_DEFAULT 60 37 38 39 static Boolean eap_sm_allowMethod(struct eap_sm *sm, int vendor, 40 EapType method); 41 static struct wpabuf * eap_sm_buildNak(struct eap_sm *sm, int id); 42 static void eap_sm_processIdentity(struct eap_sm *sm, 43 const struct wpabuf *req); 44 static void eap_sm_processNotify(struct eap_sm *sm, const struct wpabuf *req); 45 static struct wpabuf * eap_sm_buildNotify(int id); 46 static void eap_sm_parseEapReq(struct eap_sm *sm, const struct wpabuf *req); 47 #if defined(CONFIG_CTRL_IFACE) || !defined(CONFIG_NO_STDOUT_DEBUG) 48 static const char * eap_sm_method_state_txt(EapMethodState state); 49 static const char * eap_sm_decision_txt(EapDecision decision); 50 #endif /* CONFIG_CTRL_IFACE || !CONFIG_NO_STDOUT_DEBUG */ 51 static void eap_sm_request(struct eap_sm *sm, enum wpa_ctrl_req_type field, 52 const char *msg, size_t msglen); 53 54 55 56 static Boolean eapol_get_bool(struct eap_sm *sm, enum eapol_bool_var var) 57 { 58 return sm->eapol_cb->get_bool(sm->eapol_ctx, var); 59 } 60 61 62 static void eapol_set_bool(struct eap_sm *sm, enum eapol_bool_var var, 63 Boolean value) 64 { 65 sm->eapol_cb->set_bool(sm->eapol_ctx, var, value); 66 } 67 68 69 static unsigned int eapol_get_int(struct eap_sm *sm, enum eapol_int_var var) 70 { 71 return sm->eapol_cb->get_int(sm->eapol_ctx, var); 72 } 73 74 75 static void eapol_set_int(struct eap_sm *sm, enum eapol_int_var var, 76 unsigned int value) 77 { 78 sm->eapol_cb->set_int(sm->eapol_ctx, var, value); 79 } 80 81 82 static struct wpabuf * eapol_get_eapReqData(struct eap_sm *sm) 83 { 84 return sm->eapol_cb->get_eapReqData(sm->eapol_ctx); 85 } 86 87 88 static void eap_notify_status(struct eap_sm *sm, const char *status, 89 const char *parameter) 90 { 91 wpa_printf(MSG_DEBUG, "EAP: Status notification: %s (param=%s)", 92 status, parameter); 93 if (sm->eapol_cb->notify_status) 94 sm->eapol_cb->notify_status(sm->eapol_ctx, status, parameter); 95 } 96 97 98 static void eap_report_error(struct eap_sm *sm, int error_code) 99 { 100 wpa_printf(MSG_DEBUG, "EAP: Error notification: %d", error_code); 101 if (sm->eapol_cb->notify_eap_error) 102 sm->eapol_cb->notify_eap_error(sm->eapol_ctx, error_code); 103 } 104 105 106 static void eap_sm_free_key(struct eap_sm *sm) 107 { 108 if (sm->eapKeyData) { 109 bin_clear_free(sm->eapKeyData, sm->eapKeyDataLen); 110 sm->eapKeyData = NULL; 111 } 112 } 113 114 115 static void eap_deinit_prev_method(struct eap_sm *sm, const char *txt) 116 { 117 ext_password_free(sm->ext_pw_buf); 118 sm->ext_pw_buf = NULL; 119 120 if (sm->m == NULL || sm->eap_method_priv == NULL) 121 return; 122 123 wpa_printf(MSG_DEBUG, "EAP: deinitialize previously used EAP method " 124 "(%d, %s) at %s", sm->selectedMethod, sm->m->name, txt); 125 sm->m->deinit(sm, sm->eap_method_priv); 126 sm->eap_method_priv = NULL; 127 sm->m = NULL; 128 } 129 130 131 /** 132 * eap_config_allowed_method - Check whether EAP method is allowed 133 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 134 * @config: EAP configuration 135 * @vendor: Vendor-Id for expanded types or 0 = IETF for legacy types 136 * @method: EAP type 137 * Returns: 1 = allowed EAP method, 0 = not allowed 138 */ 139 static int eap_config_allowed_method(struct eap_sm *sm, 140 struct eap_peer_config *config, 141 int vendor, u32 method) 142 { 143 int i; 144 struct eap_method_type *m; 145 146 if (config == NULL || config->eap_methods == NULL) 147 return 1; 148 149 m = config->eap_methods; 150 for (i = 0; m[i].vendor != EAP_VENDOR_IETF || 151 m[i].method != EAP_TYPE_NONE; i++) { 152 if (m[i].vendor == vendor && m[i].method == method) 153 return 1; 154 } 155 return 0; 156 } 157 158 159 /** 160 * eap_allowed_method - Check whether EAP method is allowed 161 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 162 * @vendor: Vendor-Id for expanded types or 0 = IETF for legacy types 163 * @method: EAP type 164 * Returns: 1 = allowed EAP method, 0 = not allowed 165 */ 166 int eap_allowed_method(struct eap_sm *sm, int vendor, u32 method) 167 { 168 return eap_config_allowed_method(sm, eap_get_config(sm), vendor, 169 method); 170 } 171 172 173 #if defined(PCSC_FUNCS) || defined(CONFIG_EAP_PROXY) 174 static int eap_sm_append_3gpp_realm(struct eap_sm *sm, char *imsi, 175 size_t max_len, size_t *imsi_len, 176 int mnc_len) 177 { 178 char *pos, mnc[4]; 179 180 if (*imsi_len + 36 > max_len) { 181 wpa_printf(MSG_WARNING, "No room for realm in IMSI buffer"); 182 return -1; 183 } 184 185 if (mnc_len != 2 && mnc_len != 3) 186 mnc_len = 3; 187 188 if (mnc_len == 2) { 189 mnc[0] = '0'; 190 mnc[1] = imsi[3]; 191 mnc[2] = imsi[4]; 192 } else if (mnc_len == 3) { 193 mnc[0] = imsi[3]; 194 mnc[1] = imsi[4]; 195 mnc[2] = imsi[5]; 196 } 197 mnc[3] = '\0'; 198 199 pos = imsi + *imsi_len; 200 pos += os_snprintf(pos, imsi + max_len - pos, 201 "@wlan.mnc%s.mcc%c%c%c.3gppnetwork.org", 202 mnc, imsi[0], imsi[1], imsi[2]); 203 *imsi_len = pos - imsi; 204 205 return 0; 206 } 207 #endif /* PCSC_FUNCS || CONFIG_EAP_PROXY */ 208 209 210 /* 211 * This state initializes state machine variables when the machine is 212 * activated (portEnabled = TRUE). This is also used when re-starting 213 * authentication (eapRestart == TRUE). 214 */ 215 SM_STATE(EAP, INITIALIZE) 216 { 217 SM_ENTRY(EAP, INITIALIZE); 218 if (sm->fast_reauth && sm->m && sm->m->has_reauth_data && 219 sm->m->has_reauth_data(sm, sm->eap_method_priv) && 220 !sm->prev_failure && 221 sm->last_config == eap_get_config(sm)) { 222 wpa_printf(MSG_DEBUG, "EAP: maintaining EAP method data for " 223 "fast reauthentication"); 224 sm->m->deinit_for_reauth(sm, sm->eap_method_priv); 225 } else { 226 sm->last_config = eap_get_config(sm); 227 eap_deinit_prev_method(sm, "INITIALIZE"); 228 } 229 sm->selectedMethod = EAP_TYPE_NONE; 230 sm->methodState = METHOD_NONE; 231 sm->allowNotifications = TRUE; 232 sm->decision = DECISION_FAIL; 233 sm->ClientTimeout = EAP_CLIENT_TIMEOUT_DEFAULT; 234 eapol_set_int(sm, EAPOL_idleWhile, sm->ClientTimeout); 235 eapol_set_bool(sm, EAPOL_eapSuccess, FALSE); 236 eapol_set_bool(sm, EAPOL_eapFail, FALSE); 237 eap_sm_free_key(sm); 238 os_free(sm->eapSessionId); 239 sm->eapSessionId = NULL; 240 sm->eapKeyAvailable = FALSE; 241 eapol_set_bool(sm, EAPOL_eapRestart, FALSE); 242 sm->lastId = -1; /* new session - make sure this does not match with 243 * the first EAP-Packet */ 244 /* 245 * RFC 4137 does not reset eapResp and eapNoResp here. However, this 246 * seemed to be able to trigger cases where both were set and if EAPOL 247 * state machine uses eapNoResp first, it may end up not sending a real 248 * reply correctly. This occurred when the workaround in FAIL state set 249 * eapNoResp = TRUE.. Maybe that workaround needs to be fixed to do 250 * something else(?) 251 */ 252 eapol_set_bool(sm, EAPOL_eapResp, FALSE); 253 eapol_set_bool(sm, EAPOL_eapNoResp, FALSE); 254 /* 255 * RFC 4137 does not reset ignore here, but since it is possible for 256 * some method code paths to end up not setting ignore=FALSE, clear the 257 * value here to avoid issues if a previous authentication attempt 258 * failed with ignore=TRUE being left behind in the last 259 * m.check(eapReqData) operation. 260 */ 261 sm->ignore = 0; 262 sm->num_rounds = 0; 263 sm->prev_failure = 0; 264 sm->expected_failure = 0; 265 sm->reauthInit = FALSE; 266 sm->erp_seq = (u32) -1; 267 } 268 269 270 /* 271 * This state is reached whenever service from the lower layer is interrupted 272 * or unavailable (portEnabled == FALSE). Immediate transition to INITIALIZE 273 * occurs when the port becomes enabled. 274 */ 275 SM_STATE(EAP, DISABLED) 276 { 277 SM_ENTRY(EAP, DISABLED); 278 sm->num_rounds = 0; 279 /* 280 * RFC 4137 does not describe clearing of idleWhile here, but doing so 281 * allows the timer tick to be stopped more quickly when EAP is not in 282 * use. 283 */ 284 eapol_set_int(sm, EAPOL_idleWhile, 0); 285 } 286 287 288 /* 289 * The state machine spends most of its time here, waiting for something to 290 * happen. This state is entered unconditionally from INITIALIZE, DISCARD, and 291 * SEND_RESPONSE states. 292 */ 293 SM_STATE(EAP, IDLE) 294 { 295 SM_ENTRY(EAP, IDLE); 296 } 297 298 299 /* 300 * This state is entered when an EAP packet is received (eapReq == TRUE) to 301 * parse the packet header. 302 */ 303 SM_STATE(EAP, RECEIVED) 304 { 305 const struct wpabuf *eapReqData; 306 307 SM_ENTRY(EAP, RECEIVED); 308 eapReqData = eapol_get_eapReqData(sm); 309 /* parse rxReq, rxSuccess, rxFailure, reqId, reqMethod */ 310 eap_sm_parseEapReq(sm, eapReqData); 311 sm->num_rounds++; 312 } 313 314 315 /* 316 * This state is entered when a request for a new type comes in. Either the 317 * correct method is started, or a Nak response is built. 318 */ 319 SM_STATE(EAP, GET_METHOD) 320 { 321 int reinit; 322 EapType method; 323 const struct eap_method *eap_method; 324 325 SM_ENTRY(EAP, GET_METHOD); 326 327 if (sm->reqMethod == EAP_TYPE_EXPANDED) 328 method = sm->reqVendorMethod; 329 else 330 method = sm->reqMethod; 331 332 eap_method = eap_peer_get_eap_method(sm->reqVendor, method); 333 334 if (!eap_sm_allowMethod(sm, sm->reqVendor, method)) { 335 wpa_printf(MSG_DEBUG, "EAP: vendor %u method %u not allowed", 336 sm->reqVendor, method); 337 wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_PROPOSED_METHOD 338 "vendor=%u method=%u -> NAK", 339 sm->reqVendor, method); 340 eap_notify_status(sm, "refuse proposed method", 341 eap_method ? eap_method->name : "unknown"); 342 goto nak; 343 } 344 345 wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_PROPOSED_METHOD 346 "vendor=%u method=%u", sm->reqVendor, method); 347 348 eap_notify_status(sm, "accept proposed method", 349 eap_method ? eap_method->name : "unknown"); 350 /* 351 * RFC 4137 does not define specific operation for fast 352 * re-authentication (session resumption). The design here is to allow 353 * the previously used method data to be maintained for 354 * re-authentication if the method support session resumption. 355 * Otherwise, the previously used method data is freed and a new method 356 * is allocated here. 357 */ 358 if (sm->fast_reauth && 359 sm->m && sm->m->vendor == sm->reqVendor && 360 sm->m->method == method && 361 sm->m->has_reauth_data && 362 sm->m->has_reauth_data(sm, sm->eap_method_priv)) { 363 wpa_printf(MSG_DEBUG, "EAP: Using previous method data" 364 " for fast re-authentication"); 365 reinit = 1; 366 } else { 367 eap_deinit_prev_method(sm, "GET_METHOD"); 368 reinit = 0; 369 } 370 371 sm->selectedMethod = sm->reqMethod; 372 if (sm->m == NULL) 373 sm->m = eap_method; 374 if (!sm->m) { 375 wpa_printf(MSG_DEBUG, "EAP: Could not find selected method: " 376 "vendor %d method %d", 377 sm->reqVendor, method); 378 goto nak; 379 } 380 381 sm->ClientTimeout = EAP_CLIENT_TIMEOUT_DEFAULT; 382 383 wpa_printf(MSG_DEBUG, "EAP: Initialize selected EAP method: " 384 "vendor %u method %u (%s)", 385 sm->reqVendor, method, sm->m->name); 386 if (reinit) { 387 sm->eap_method_priv = sm->m->init_for_reauth( 388 sm, sm->eap_method_priv); 389 } else { 390 sm->waiting_ext_cert_check = 0; 391 sm->ext_cert_check = 0; 392 sm->eap_method_priv = sm->m->init(sm); 393 } 394 395 if (sm->eap_method_priv == NULL) { 396 struct eap_peer_config *config = eap_get_config(sm); 397 wpa_msg(sm->msg_ctx, MSG_INFO, 398 "EAP: Failed to initialize EAP method: vendor %u " 399 "method %u (%s)", 400 sm->reqVendor, method, sm->m->name); 401 sm->m = NULL; 402 sm->methodState = METHOD_NONE; 403 sm->selectedMethod = EAP_TYPE_NONE; 404 if (sm->reqMethod == EAP_TYPE_TLS && config && 405 (config->pending_req_pin || 406 config->pending_req_passphrase)) { 407 /* 408 * Return without generating Nak in order to allow 409 * entering of PIN code or passphrase to retry the 410 * current EAP packet. 411 */ 412 wpa_printf(MSG_DEBUG, "EAP: Pending PIN/passphrase " 413 "request - skip Nak"); 414 return; 415 } 416 417 goto nak; 418 } 419 420 sm->methodState = METHOD_INIT; 421 wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_METHOD 422 "EAP vendor %u method %u (%s) selected", 423 sm->reqVendor, method, sm->m->name); 424 return; 425 426 nak: 427 wpabuf_free(sm->eapRespData); 428 sm->eapRespData = NULL; 429 sm->eapRespData = eap_sm_buildNak(sm, sm->reqId); 430 } 431 432 433 #ifdef CONFIG_ERP 434 435 static char * eap_get_realm(struct eap_sm *sm, struct eap_peer_config *config) 436 { 437 char *realm; 438 size_t i, realm_len; 439 440 if (!config) 441 return NULL; 442 443 if (config->identity) { 444 for (i = 0; i < config->identity_len; i++) { 445 if (config->identity[i] == '@') 446 break; 447 } 448 if (i < config->identity_len) { 449 realm_len = config->identity_len - i - 1; 450 realm = os_malloc(realm_len + 1); 451 if (realm == NULL) 452 return NULL; 453 os_memcpy(realm, &config->identity[i + 1], realm_len); 454 realm[realm_len] = '\0'; 455 return realm; 456 } 457 } 458 459 if (config->anonymous_identity) { 460 for (i = 0; i < config->anonymous_identity_len; i++) { 461 if (config->anonymous_identity[i] == '@') 462 break; 463 } 464 if (i < config->anonymous_identity_len) { 465 realm_len = config->anonymous_identity_len - i - 1; 466 realm = os_malloc(realm_len + 1); 467 if (realm == NULL) 468 return NULL; 469 os_memcpy(realm, &config->anonymous_identity[i + 1], 470 realm_len); 471 realm[realm_len] = '\0'; 472 return realm; 473 } 474 } 475 476 #ifdef CONFIG_EAP_PROXY 477 /* When identity is not provided in the config, build the realm from 478 * IMSI for eap_proxy based methods. 479 */ 480 if (!config->identity && !config->anonymous_identity && 481 sm->eapol_cb->get_imsi && 482 (eap_config_allowed_method(sm, config, EAP_VENDOR_IETF, 483 EAP_TYPE_SIM) || 484 eap_config_allowed_method(sm, config, EAP_VENDOR_IETF, 485 EAP_TYPE_AKA) || 486 eap_config_allowed_method(sm, config, EAP_VENDOR_IETF, 487 EAP_TYPE_AKA_PRIME))) { 488 char imsi[100]; 489 size_t imsi_len; 490 int mnc_len, pos; 491 492 wpa_printf(MSG_DEBUG, "EAP: Build realm from IMSI (eap_proxy)"); 493 mnc_len = sm->eapol_cb->get_imsi(sm->eapol_ctx, config->sim_num, 494 imsi, &imsi_len); 495 if (mnc_len < 0) 496 return NULL; 497 498 pos = imsi_len + 1; /* points to the beginning of the realm */ 499 if (eap_sm_append_3gpp_realm(sm, imsi, sizeof(imsi), &imsi_len, 500 mnc_len) < 0) { 501 wpa_printf(MSG_WARNING, "Could not append realm"); 502 return NULL; 503 } 504 505 realm = os_strdup(&imsi[pos]); 506 if (!realm) 507 return NULL; 508 509 wpa_printf(MSG_DEBUG, "EAP: Generated realm '%s'", realm); 510 return realm; 511 } 512 #endif /* CONFIG_EAP_PROXY */ 513 514 return NULL; 515 } 516 517 518 static char * eap_home_realm(struct eap_sm *sm) 519 { 520 return eap_get_realm(sm, eap_get_config(sm)); 521 } 522 523 524 static struct eap_erp_key * 525 eap_erp_get_key(struct eap_sm *sm, const char *realm) 526 { 527 struct eap_erp_key *erp; 528 529 dl_list_for_each(erp, &sm->erp_keys, struct eap_erp_key, list) { 530 char *pos; 531 532 pos = os_strchr(erp->keyname_nai, '@'); 533 if (!pos) 534 continue; 535 pos++; 536 if (os_strcmp(pos, realm) == 0) 537 return erp; 538 } 539 540 return NULL; 541 } 542 543 544 static struct eap_erp_key * 545 eap_erp_get_key_nai(struct eap_sm *sm, const char *nai) 546 { 547 struct eap_erp_key *erp; 548 549 dl_list_for_each(erp, &sm->erp_keys, struct eap_erp_key, list) { 550 if (os_strcmp(erp->keyname_nai, nai) == 0) 551 return erp; 552 } 553 554 return NULL; 555 } 556 557 558 static void eap_peer_erp_free_key(struct eap_erp_key *erp) 559 { 560 dl_list_del(&erp->list); 561 bin_clear_free(erp, sizeof(*erp)); 562 } 563 564 565 static void eap_erp_remove_keys_realm(struct eap_sm *sm, const char *realm) 566 { 567 struct eap_erp_key *erp; 568 569 while ((erp = eap_erp_get_key(sm, realm)) != NULL) { 570 wpa_printf(MSG_DEBUG, "EAP: Delete old ERP key %s", 571 erp->keyname_nai); 572 eap_peer_erp_free_key(erp); 573 } 574 } 575 576 577 int eap_peer_update_erp_next_seq_num(struct eap_sm *sm, u16 next_seq_num) 578 { 579 struct eap_erp_key *erp; 580 char *home_realm; 581 582 home_realm = eap_home_realm(sm); 583 if (!home_realm || os_strlen(home_realm) == 0) { 584 os_free(home_realm); 585 return -1; 586 } 587 588 erp = eap_erp_get_key(sm, home_realm); 589 if (!erp) { 590 wpa_printf(MSG_DEBUG, 591 "EAP: Failed to find ERP key for realm: %s", 592 home_realm); 593 os_free(home_realm); 594 return -1; 595 } 596 597 if ((u32) next_seq_num < erp->next_seq) { 598 /* Sequence number has wrapped around, clear this ERP 599 * info and do a full auth next time. 600 */ 601 eap_peer_erp_free_key(erp); 602 } else { 603 erp->next_seq = (u32) next_seq_num; 604 } 605 606 os_free(home_realm); 607 return 0; 608 } 609 610 611 int eap_peer_get_erp_info(struct eap_sm *sm, struct eap_peer_config *config, 612 const u8 **username, size_t *username_len, 613 const u8 **realm, size_t *realm_len, 614 u16 *erp_next_seq_num, const u8 **rrk, 615 size_t *rrk_len) 616 { 617 struct eap_erp_key *erp; 618 char *home_realm; 619 char *pos; 620 621 if (config) 622 home_realm = eap_get_realm(sm, config); 623 else 624 home_realm = eap_home_realm(sm); 625 if (!home_realm || os_strlen(home_realm) == 0) { 626 os_free(home_realm); 627 return -1; 628 } 629 630 erp = eap_erp_get_key(sm, home_realm); 631 os_free(home_realm); 632 if (!erp) 633 return -1; 634 635 if (erp->next_seq >= 65536) 636 return -1; /* SEQ has range of 0..65535 */ 637 638 pos = os_strchr(erp->keyname_nai, '@'); 639 if (!pos) 640 return -1; /* this cannot really happen */ 641 *username_len = pos - erp->keyname_nai; 642 *username = (u8 *) erp->keyname_nai; 643 644 pos++; 645 *realm_len = os_strlen(pos); 646 *realm = (u8 *) pos; 647 648 *erp_next_seq_num = (u16) erp->next_seq; 649 650 *rrk_len = erp->rRK_len; 651 *rrk = erp->rRK; 652 653 if (*username_len == 0 || *realm_len == 0 || *rrk_len == 0) 654 return -1; 655 656 return 0; 657 } 658 659 #endif /* CONFIG_ERP */ 660 661 662 void eap_peer_erp_free_keys(struct eap_sm *sm) 663 { 664 #ifdef CONFIG_ERP 665 struct eap_erp_key *erp, *tmp; 666 667 dl_list_for_each_safe(erp, tmp, &sm->erp_keys, struct eap_erp_key, list) 668 eap_peer_erp_free_key(erp); 669 #endif /* CONFIG_ERP */ 670 } 671 672 673 /* Note: If ext_session and/or ext_emsk are passed to this function, they are 674 * expected to point to allocated memory and those allocations will be freed 675 * unconditionally. */ 676 void eap_peer_erp_init(struct eap_sm *sm, u8 *ext_session_id, 677 size_t ext_session_id_len, u8 *ext_emsk, 678 size_t ext_emsk_len) 679 { 680 #ifdef CONFIG_ERP 681 u8 *emsk = NULL; 682 size_t emsk_len = 0; 683 u8 *session_id = NULL; 684 size_t session_id_len = 0; 685 u8 EMSKname[EAP_EMSK_NAME_LEN]; 686 u8 len[2], ctx[3]; 687 char *realm; 688 size_t realm_len, nai_buf_len; 689 struct eap_erp_key *erp = NULL; 690 int pos; 691 692 realm = eap_home_realm(sm); 693 if (!realm) 694 goto fail; 695 realm_len = os_strlen(realm); 696 wpa_printf(MSG_DEBUG, "EAP: Realm for ERP keyName-NAI: %s", realm); 697 eap_erp_remove_keys_realm(sm, realm); 698 699 nai_buf_len = 2 * EAP_EMSK_NAME_LEN + 1 + realm_len; 700 if (nai_buf_len > 253) { 701 /* 702 * keyName-NAI has a maximum length of 253 octet to fit in 703 * RADIUS attributes. 704 */ 705 wpa_printf(MSG_DEBUG, 706 "EAP: Too long realm for ERP keyName-NAI maximum length"); 707 goto fail; 708 } 709 nai_buf_len++; /* null termination */ 710 erp = os_zalloc(sizeof(*erp) + nai_buf_len); 711 if (erp == NULL) 712 goto fail; 713 714 if (ext_emsk) { 715 emsk = ext_emsk; 716 emsk_len = ext_emsk_len; 717 } else { 718 emsk = sm->m->get_emsk(sm, sm->eap_method_priv, &emsk_len); 719 } 720 721 if (!emsk || emsk_len == 0 || emsk_len > ERP_MAX_KEY_LEN) { 722 wpa_printf(MSG_DEBUG, 723 "EAP: No suitable EMSK available for ERP"); 724 goto fail; 725 } 726 727 wpa_hexdump_key(MSG_DEBUG, "EAP: EMSK", emsk, emsk_len); 728 729 if (ext_session_id) { 730 session_id = ext_session_id; 731 session_id_len = ext_session_id_len; 732 } else { 733 session_id = sm->eapSessionId; 734 session_id_len = sm->eapSessionIdLen; 735 } 736 737 if (!session_id || session_id_len == 0) { 738 wpa_printf(MSG_DEBUG, 739 "EAP: No suitable session id available for ERP"); 740 goto fail; 741 } 742 743 WPA_PUT_BE16(len, EAP_EMSK_NAME_LEN); 744 if (hmac_sha256_kdf(session_id, session_id_len, "EMSK", len, 745 sizeof(len), EMSKname, EAP_EMSK_NAME_LEN) < 0) { 746 wpa_printf(MSG_DEBUG, "EAP: Could not derive EMSKname"); 747 goto fail; 748 } 749 wpa_hexdump(MSG_DEBUG, "EAP: EMSKname", EMSKname, EAP_EMSK_NAME_LEN); 750 751 pos = wpa_snprintf_hex(erp->keyname_nai, nai_buf_len, 752 EMSKname, EAP_EMSK_NAME_LEN); 753 erp->keyname_nai[pos] = '@'; 754 os_memcpy(&erp->keyname_nai[pos + 1], realm, realm_len); 755 756 WPA_PUT_BE16(len, emsk_len); 757 if (hmac_sha256_kdf(emsk, emsk_len, 758 "EAP Re-authentication Root Key@ietf.org", 759 len, sizeof(len), erp->rRK, emsk_len) < 0) { 760 wpa_printf(MSG_DEBUG, "EAP: Could not derive rRK for ERP"); 761 goto fail; 762 } 763 erp->rRK_len = emsk_len; 764 wpa_hexdump_key(MSG_DEBUG, "EAP: ERP rRK", erp->rRK, erp->rRK_len); 765 766 ctx[0] = EAP_ERP_CS_HMAC_SHA256_128; 767 WPA_PUT_BE16(&ctx[1], erp->rRK_len); 768 if (hmac_sha256_kdf(erp->rRK, erp->rRK_len, 769 "Re-authentication Integrity Key@ietf.org", 770 ctx, sizeof(ctx), erp->rIK, erp->rRK_len) < 0) { 771 wpa_printf(MSG_DEBUG, "EAP: Could not derive rIK for ERP"); 772 goto fail; 773 } 774 erp->rIK_len = erp->rRK_len; 775 wpa_hexdump_key(MSG_DEBUG, "EAP: ERP rIK", erp->rIK, erp->rIK_len); 776 777 wpa_printf(MSG_DEBUG, "EAP: Stored ERP keys %s", erp->keyname_nai); 778 dl_list_add(&sm->erp_keys, &erp->list); 779 erp = NULL; 780 fail: 781 if (ext_emsk) 782 bin_clear_free(ext_emsk, ext_emsk_len); 783 else 784 bin_clear_free(emsk, emsk_len); 785 bin_clear_free(ext_session_id, ext_session_id_len); 786 bin_clear_free(erp, sizeof(*erp)); 787 os_free(realm); 788 #endif /* CONFIG_ERP */ 789 } 790 791 792 #ifdef CONFIG_ERP 793 struct wpabuf * eap_peer_build_erp_reauth_start(struct eap_sm *sm, u8 eap_id) 794 { 795 char *realm; 796 struct eap_erp_key *erp; 797 struct wpabuf *msg; 798 u8 hash[SHA256_MAC_LEN]; 799 800 realm = eap_home_realm(sm); 801 if (!realm) 802 return NULL; 803 804 erp = eap_erp_get_key(sm, realm); 805 os_free(realm); 806 realm = NULL; 807 if (!erp) 808 return NULL; 809 810 if (erp->next_seq >= 65536) 811 return NULL; /* SEQ has range of 0..65535 */ 812 813 /* TODO: check rRK lifetime expiration */ 814 815 wpa_printf(MSG_DEBUG, "EAP: Valid ERP key found %s (SEQ=%u)", 816 erp->keyname_nai, erp->next_seq); 817 818 msg = eap_msg_alloc(EAP_VENDOR_IETF, (EapType) EAP_ERP_TYPE_REAUTH, 819 1 + 2 + 2 + os_strlen(erp->keyname_nai) + 1 + 16, 820 EAP_CODE_INITIATE, eap_id); 821 if (msg == NULL) 822 return NULL; 823 824 wpabuf_put_u8(msg, 0x20); /* Flags: R=0 B=0 L=1 */ 825 wpabuf_put_be16(msg, erp->next_seq); 826 827 wpabuf_put_u8(msg, EAP_ERP_TLV_KEYNAME_NAI); 828 wpabuf_put_u8(msg, os_strlen(erp->keyname_nai)); 829 wpabuf_put_str(msg, erp->keyname_nai); 830 831 wpabuf_put_u8(msg, EAP_ERP_CS_HMAC_SHA256_128); /* Cryptosuite */ 832 833 if (hmac_sha256(erp->rIK, erp->rIK_len, 834 wpabuf_head(msg), wpabuf_len(msg), hash) < 0) { 835 wpabuf_free(msg); 836 return NULL; 837 } 838 wpabuf_put_data(msg, hash, 16); 839 840 sm->erp_seq = erp->next_seq; 841 erp->next_seq++; 842 843 wpa_hexdump_buf(MSG_DEBUG, "ERP: EAP-Initiate/Re-auth", msg); 844 845 return msg; 846 } 847 848 849 static int eap_peer_erp_reauth_start(struct eap_sm *sm, u8 eap_id) 850 { 851 struct wpabuf *msg; 852 853 msg = eap_peer_build_erp_reauth_start(sm, eap_id); 854 if (!msg) 855 return -1; 856 857 wpa_printf(MSG_DEBUG, "EAP: Sending EAP-Initiate/Re-auth"); 858 wpabuf_free(sm->eapRespData); 859 sm->eapRespData = msg; 860 sm->reauthInit = TRUE; 861 return 0; 862 } 863 #endif /* CONFIG_ERP */ 864 865 866 /* 867 * The method processing happens here. The request from the authenticator is 868 * processed, and an appropriate response packet is built. 869 */ 870 SM_STATE(EAP, METHOD) 871 { 872 struct wpabuf *eapReqData; 873 struct eap_method_ret ret; 874 int min_len = 1; 875 876 SM_ENTRY(EAP, METHOD); 877 if (sm->m == NULL) { 878 wpa_printf(MSG_WARNING, "EAP::METHOD - method not selected"); 879 return; 880 } 881 882 eapReqData = eapol_get_eapReqData(sm); 883 if (sm->m->vendor == EAP_VENDOR_IETF && sm->m->method == EAP_TYPE_LEAP) 884 min_len = 0; /* LEAP uses EAP-Success without payload */ 885 if (!eap_hdr_len_valid(eapReqData, min_len)) 886 return; 887 888 /* 889 * Get ignore, methodState, decision, allowNotifications, and 890 * eapRespData. RFC 4137 uses three separate method procedure (check, 891 * process, and buildResp) in this state. These have been combined into 892 * a single function call to m->process() in order to optimize EAP 893 * method implementation interface a bit. These procedures are only 894 * used from within this METHOD state, so there is no need to keep 895 * these as separate C functions. 896 * 897 * The RFC 4137 procedures return values as follows: 898 * ignore = m.check(eapReqData) 899 * (methodState, decision, allowNotifications) = m.process(eapReqData) 900 * eapRespData = m.buildResp(reqId) 901 */ 902 os_memset(&ret, 0, sizeof(ret)); 903 ret.ignore = sm->ignore; 904 ret.methodState = sm->methodState; 905 ret.decision = sm->decision; 906 ret.allowNotifications = sm->allowNotifications; 907 wpabuf_free(sm->eapRespData); 908 sm->eapRespData = NULL; 909 sm->eapRespData = sm->m->process(sm, sm->eap_method_priv, &ret, 910 eapReqData); 911 wpa_printf(MSG_DEBUG, "EAP: method process -> ignore=%s " 912 "methodState=%s decision=%s eapRespData=%p", 913 ret.ignore ? "TRUE" : "FALSE", 914 eap_sm_method_state_txt(ret.methodState), 915 eap_sm_decision_txt(ret.decision), 916 sm->eapRespData); 917 918 sm->ignore = ret.ignore; 919 if (sm->ignore) 920 return; 921 sm->methodState = ret.methodState; 922 sm->decision = ret.decision; 923 sm->allowNotifications = ret.allowNotifications; 924 925 if (sm->m->isKeyAvailable && sm->m->getKey && 926 sm->m->isKeyAvailable(sm, sm->eap_method_priv)) { 927 eap_sm_free_key(sm); 928 sm->eapKeyData = sm->m->getKey(sm, sm->eap_method_priv, 929 &sm->eapKeyDataLen); 930 os_free(sm->eapSessionId); 931 sm->eapSessionId = NULL; 932 if (sm->m->getSessionId) { 933 sm->eapSessionId = sm->m->getSessionId( 934 sm, sm->eap_method_priv, 935 &sm->eapSessionIdLen); 936 wpa_hexdump(MSG_DEBUG, "EAP: Session-Id", 937 sm->eapSessionId, sm->eapSessionIdLen); 938 } 939 } 940 } 941 942 943 /* 944 * This state signals the lower layer that a response packet is ready to be 945 * sent. 946 */ 947 SM_STATE(EAP, SEND_RESPONSE) 948 { 949 SM_ENTRY(EAP, SEND_RESPONSE); 950 wpabuf_free(sm->lastRespData); 951 if (sm->eapRespData) { 952 if (sm->workaround) 953 os_memcpy(sm->last_sha1, sm->req_sha1, 20); 954 sm->lastId = sm->reqId; 955 sm->lastRespData = wpabuf_dup(sm->eapRespData); 956 eapol_set_bool(sm, EAPOL_eapResp, TRUE); 957 } else { 958 wpa_printf(MSG_DEBUG, "EAP: No eapRespData available"); 959 sm->lastRespData = NULL; 960 } 961 eapol_set_bool(sm, EAPOL_eapReq, FALSE); 962 eapol_set_int(sm, EAPOL_idleWhile, sm->ClientTimeout); 963 sm->reauthInit = FALSE; 964 } 965 966 967 /* 968 * This state signals the lower layer that the request was discarded, and no 969 * response packet will be sent at this time. 970 */ 971 SM_STATE(EAP, DISCARD) 972 { 973 SM_ENTRY(EAP, DISCARD); 974 eapol_set_bool(sm, EAPOL_eapReq, FALSE); 975 eapol_set_bool(sm, EAPOL_eapNoResp, TRUE); 976 } 977 978 979 /* 980 * Handles requests for Identity method and builds a response. 981 */ 982 SM_STATE(EAP, IDENTITY) 983 { 984 const struct wpabuf *eapReqData; 985 986 SM_ENTRY(EAP, IDENTITY); 987 eapReqData = eapol_get_eapReqData(sm); 988 if (!eap_hdr_len_valid(eapReqData, 1)) 989 return; 990 eap_sm_processIdentity(sm, eapReqData); 991 wpabuf_free(sm->eapRespData); 992 sm->eapRespData = NULL; 993 sm->eapRespData = eap_sm_buildIdentity(sm, sm->reqId, 0); 994 } 995 996 997 /* 998 * Handles requests for Notification method and builds a response. 999 */ 1000 SM_STATE(EAP, NOTIFICATION) 1001 { 1002 const struct wpabuf *eapReqData; 1003 1004 SM_ENTRY(EAP, NOTIFICATION); 1005 eapReqData = eapol_get_eapReqData(sm); 1006 if (!eap_hdr_len_valid(eapReqData, 1)) 1007 return; 1008 eap_sm_processNotify(sm, eapReqData); 1009 wpabuf_free(sm->eapRespData); 1010 sm->eapRespData = NULL; 1011 sm->eapRespData = eap_sm_buildNotify(sm->reqId); 1012 } 1013 1014 1015 /* 1016 * This state retransmits the previous response packet. 1017 */ 1018 SM_STATE(EAP, RETRANSMIT) 1019 { 1020 SM_ENTRY(EAP, RETRANSMIT); 1021 wpabuf_free(sm->eapRespData); 1022 if (sm->lastRespData) 1023 sm->eapRespData = wpabuf_dup(sm->lastRespData); 1024 else 1025 sm->eapRespData = NULL; 1026 } 1027 1028 1029 /* 1030 * This state is entered in case of a successful completion of authentication 1031 * and state machine waits here until port is disabled or EAP authentication is 1032 * restarted. 1033 */ 1034 SM_STATE(EAP, SUCCESS) 1035 { 1036 struct eap_peer_config *config = eap_get_config(sm); 1037 1038 SM_ENTRY(EAP, SUCCESS); 1039 if (sm->eapKeyData != NULL) 1040 sm->eapKeyAvailable = TRUE; 1041 eapol_set_bool(sm, EAPOL_eapSuccess, TRUE); 1042 1043 /* 1044 * RFC 4137 does not clear eapReq here, but this seems to be required 1045 * to avoid processing the same request twice when state machine is 1046 * initialized. 1047 */ 1048 eapol_set_bool(sm, EAPOL_eapReq, FALSE); 1049 1050 /* 1051 * RFC 4137 does not set eapNoResp here, but this seems to be required 1052 * to get EAPOL Supplicant backend state machine into SUCCESS state. In 1053 * addition, either eapResp or eapNoResp is required to be set after 1054 * processing the received EAP frame. 1055 */ 1056 eapol_set_bool(sm, EAPOL_eapNoResp, TRUE); 1057 1058 wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_SUCCESS 1059 "EAP authentication completed successfully"); 1060 1061 if (config->erp && sm->m->get_emsk && sm->eapSessionId && 1062 sm->m->isKeyAvailable && 1063 sm->m->isKeyAvailable(sm, sm->eap_method_priv)) 1064 eap_peer_erp_init(sm, NULL, 0, NULL, 0); 1065 } 1066 1067 1068 /* 1069 * This state is entered in case of a failure and state machine waits here 1070 * until port is disabled or EAP authentication is restarted. 1071 */ 1072 SM_STATE(EAP, FAILURE) 1073 { 1074 SM_ENTRY(EAP, FAILURE); 1075 eapol_set_bool(sm, EAPOL_eapFail, TRUE); 1076 1077 /* 1078 * RFC 4137 does not clear eapReq here, but this seems to be required 1079 * to avoid processing the same request twice when state machine is 1080 * initialized. 1081 */ 1082 eapol_set_bool(sm, EAPOL_eapReq, FALSE); 1083 1084 /* 1085 * RFC 4137 does not set eapNoResp here. However, either eapResp or 1086 * eapNoResp is required to be set after processing the received EAP 1087 * frame. 1088 */ 1089 eapol_set_bool(sm, EAPOL_eapNoResp, TRUE); 1090 1091 wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_FAILURE 1092 "EAP authentication failed"); 1093 1094 sm->prev_failure = 1; 1095 } 1096 1097 1098 static int eap_success_workaround(struct eap_sm *sm, int reqId, int lastId) 1099 { 1100 /* 1101 * At least Microsoft IAS and Meetinghouse Aegis seem to be sending 1102 * EAP-Success/Failure with lastId + 1 even though RFC 3748 and 1103 * RFC 4137 require that reqId == lastId. In addition, it looks like 1104 * Ringmaster v2.1.2.0 would be using lastId + 2 in EAP-Success. 1105 * 1106 * Accept this kind of Id if EAP workarounds are enabled. These are 1107 * unauthenticated plaintext messages, so this should have minimal 1108 * security implications (bit easier to fake EAP-Success/Failure). 1109 */ 1110 if (sm->workaround && (reqId == ((lastId + 1) & 0xff) || 1111 reqId == ((lastId + 2) & 0xff))) { 1112 wpa_printf(MSG_DEBUG, "EAP: Workaround for unexpected " 1113 "identifier field in EAP Success: " 1114 "reqId=%d lastId=%d (these are supposed to be " 1115 "same)", reqId, lastId); 1116 return 1; 1117 } 1118 wpa_printf(MSG_DEBUG, "EAP: EAP-Success Id mismatch - reqId=%d " 1119 "lastId=%d", reqId, lastId); 1120 return 0; 1121 } 1122 1123 1124 /* 1125 * RFC 4137 - Appendix A.1: EAP Peer State Machine - State transitions 1126 */ 1127 1128 static void eap_peer_sm_step_idle(struct eap_sm *sm) 1129 { 1130 /* 1131 * The first three transitions are from RFC 4137. The last two are 1132 * local additions to handle special cases with LEAP and PEAP server 1133 * not sending EAP-Success in some cases. 1134 */ 1135 if (eapol_get_bool(sm, EAPOL_eapReq)) 1136 SM_ENTER(EAP, RECEIVED); 1137 else if ((eapol_get_bool(sm, EAPOL_altAccept) && 1138 sm->decision != DECISION_FAIL) || 1139 (eapol_get_int(sm, EAPOL_idleWhile) == 0 && 1140 sm->decision == DECISION_UNCOND_SUCC)) 1141 SM_ENTER(EAP, SUCCESS); 1142 else if (eapol_get_bool(sm, EAPOL_altReject) || 1143 (eapol_get_int(sm, EAPOL_idleWhile) == 0 && 1144 sm->decision != DECISION_UNCOND_SUCC) || 1145 (eapol_get_bool(sm, EAPOL_altAccept) && 1146 sm->methodState != METHOD_CONT && 1147 sm->decision == DECISION_FAIL)) 1148 SM_ENTER(EAP, FAILURE); 1149 else if (sm->selectedMethod == EAP_TYPE_LEAP && 1150 sm->leap_done && sm->decision != DECISION_FAIL && 1151 sm->methodState == METHOD_DONE) 1152 SM_ENTER(EAP, SUCCESS); 1153 else if (sm->selectedMethod == EAP_TYPE_PEAP && 1154 sm->peap_done && sm->decision != DECISION_FAIL && 1155 sm->methodState == METHOD_DONE) 1156 SM_ENTER(EAP, SUCCESS); 1157 } 1158 1159 1160 static int eap_peer_req_is_duplicate(struct eap_sm *sm) 1161 { 1162 int duplicate; 1163 1164 duplicate = (sm->reqId == sm->lastId) && sm->rxReq; 1165 if (sm->workaround && duplicate && 1166 os_memcmp(sm->req_sha1, sm->last_sha1, 20) != 0) { 1167 /* 1168 * RFC 4137 uses (reqId == lastId) as the only verification for 1169 * duplicate EAP requests. However, this misses cases where the 1170 * AS is incorrectly using the same id again; and 1171 * unfortunately, such implementations exist. Use SHA1 hash as 1172 * an extra verification for the packets being duplicate to 1173 * workaround these issues. 1174 */ 1175 wpa_printf(MSG_DEBUG, "EAP: AS used the same Id again, but " 1176 "EAP packets were not identical"); 1177 wpa_printf(MSG_DEBUG, "EAP: workaround - assume this is not a " 1178 "duplicate packet"); 1179 duplicate = 0; 1180 } 1181 1182 return duplicate; 1183 } 1184 1185 1186 static int eap_peer_sm_allow_canned(struct eap_sm *sm) 1187 { 1188 struct eap_peer_config *config = eap_get_config(sm); 1189 1190 return config && config->phase1 && 1191 os_strstr(config->phase1, "allow_canned_success=1"); 1192 } 1193 1194 1195 static void eap_peer_sm_step_received(struct eap_sm *sm) 1196 { 1197 int duplicate = eap_peer_req_is_duplicate(sm); 1198 1199 /* 1200 * Two special cases below for LEAP are local additions to work around 1201 * odd LEAP behavior (EAP-Success in the middle of authentication and 1202 * then swapped roles). Other transitions are based on RFC 4137. 1203 */ 1204 if (sm->rxSuccess && sm->decision != DECISION_FAIL && 1205 (sm->reqId == sm->lastId || 1206 eap_success_workaround(sm, sm->reqId, sm->lastId))) 1207 SM_ENTER(EAP, SUCCESS); 1208 else if (sm->workaround && sm->lastId == -1 && sm->rxSuccess && 1209 !sm->rxFailure && !sm->rxReq && eap_peer_sm_allow_canned(sm)) 1210 SM_ENTER(EAP, SUCCESS); /* EAP-Success prior any EAP method */ 1211 else if (sm->workaround && sm->lastId == -1 && sm->rxFailure && 1212 !sm->rxReq && sm->methodState != METHOD_CONT && 1213 eap_peer_sm_allow_canned(sm)) 1214 SM_ENTER(EAP, FAILURE); /* EAP-Failure prior any EAP method */ 1215 else if (sm->workaround && sm->rxSuccess && !sm->rxFailure && 1216 !sm->rxReq && sm->methodState != METHOD_CONT && 1217 eap_peer_sm_allow_canned(sm)) 1218 SM_ENTER(EAP, SUCCESS); /* EAP-Success after Identity */ 1219 else if (sm->methodState != METHOD_CONT && 1220 ((sm->rxFailure && 1221 sm->decision != DECISION_UNCOND_SUCC) || 1222 (sm->rxSuccess && sm->decision == DECISION_FAIL && 1223 (sm->selectedMethod != EAP_TYPE_LEAP || 1224 sm->methodState != METHOD_MAY_CONT))) && 1225 (sm->reqId == sm->lastId || 1226 eap_success_workaround(sm, sm->reqId, sm->lastId))) 1227 SM_ENTER(EAP, FAILURE); 1228 else if (sm->rxReq && duplicate) 1229 SM_ENTER(EAP, RETRANSMIT); 1230 else if (sm->rxReq && !duplicate && 1231 sm->reqMethod == EAP_TYPE_NOTIFICATION && 1232 sm->allowNotifications) 1233 SM_ENTER(EAP, NOTIFICATION); 1234 else if (sm->rxReq && !duplicate && 1235 sm->selectedMethod == EAP_TYPE_NONE && 1236 sm->reqMethod == EAP_TYPE_IDENTITY) 1237 SM_ENTER(EAP, IDENTITY); 1238 else if (sm->rxReq && !duplicate && 1239 sm->selectedMethod == EAP_TYPE_NONE && 1240 sm->reqMethod != EAP_TYPE_IDENTITY && 1241 sm->reqMethod != EAP_TYPE_NOTIFICATION) 1242 SM_ENTER(EAP, GET_METHOD); 1243 else if (sm->rxReq && !duplicate && 1244 sm->reqMethod == sm->selectedMethod && 1245 sm->methodState != METHOD_DONE) 1246 SM_ENTER(EAP, METHOD); 1247 else if (sm->selectedMethod == EAP_TYPE_LEAP && 1248 (sm->rxSuccess || sm->rxResp)) 1249 SM_ENTER(EAP, METHOD); 1250 else if (sm->reauthInit) 1251 SM_ENTER(EAP, SEND_RESPONSE); 1252 else 1253 SM_ENTER(EAP, DISCARD); 1254 } 1255 1256 1257 static void eap_peer_sm_step_local(struct eap_sm *sm) 1258 { 1259 switch (sm->EAP_state) { 1260 case EAP_INITIALIZE: 1261 SM_ENTER(EAP, IDLE); 1262 break; 1263 case EAP_DISABLED: 1264 if (eapol_get_bool(sm, EAPOL_portEnabled) && 1265 !sm->force_disabled) 1266 SM_ENTER(EAP, INITIALIZE); 1267 break; 1268 case EAP_IDLE: 1269 eap_peer_sm_step_idle(sm); 1270 break; 1271 case EAP_RECEIVED: 1272 eap_peer_sm_step_received(sm); 1273 break; 1274 case EAP_GET_METHOD: 1275 if (sm->selectedMethod == sm->reqMethod) 1276 SM_ENTER(EAP, METHOD); 1277 else 1278 SM_ENTER(EAP, SEND_RESPONSE); 1279 break; 1280 case EAP_METHOD: 1281 /* 1282 * Note: RFC 4137 uses methodState == DONE && decision == FAIL 1283 * as the condition. eapRespData == NULL here is used to allow 1284 * final EAP method response to be sent without having to change 1285 * all methods to either use methodState MAY_CONT or leaving 1286 * decision to something else than FAIL in cases where the only 1287 * expected response is EAP-Failure. 1288 */ 1289 if (sm->ignore) 1290 SM_ENTER(EAP, DISCARD); 1291 else if (sm->methodState == METHOD_DONE && 1292 sm->decision == DECISION_FAIL && !sm->eapRespData) 1293 SM_ENTER(EAP, FAILURE); 1294 else 1295 SM_ENTER(EAP, SEND_RESPONSE); 1296 break; 1297 case EAP_SEND_RESPONSE: 1298 SM_ENTER(EAP, IDLE); 1299 break; 1300 case EAP_DISCARD: 1301 SM_ENTER(EAP, IDLE); 1302 break; 1303 case EAP_IDENTITY: 1304 SM_ENTER(EAP, SEND_RESPONSE); 1305 break; 1306 case EAP_NOTIFICATION: 1307 SM_ENTER(EAP, SEND_RESPONSE); 1308 break; 1309 case EAP_RETRANSMIT: 1310 SM_ENTER(EAP, SEND_RESPONSE); 1311 break; 1312 case EAP_SUCCESS: 1313 break; 1314 case EAP_FAILURE: 1315 break; 1316 } 1317 } 1318 1319 1320 SM_STEP(EAP) 1321 { 1322 /* Global transitions */ 1323 if (eapol_get_bool(sm, EAPOL_eapRestart) && 1324 eapol_get_bool(sm, EAPOL_portEnabled)) 1325 SM_ENTER_GLOBAL(EAP, INITIALIZE); 1326 else if (!eapol_get_bool(sm, EAPOL_portEnabled) || sm->force_disabled) 1327 SM_ENTER_GLOBAL(EAP, DISABLED); 1328 else if (sm->num_rounds > EAP_MAX_AUTH_ROUNDS) { 1329 /* RFC 4137 does not place any limit on number of EAP messages 1330 * in an authentication session. However, some error cases have 1331 * ended up in a state were EAP messages were sent between the 1332 * peer and server in a loop (e.g., TLS ACK frame in both 1333 * direction). Since this is quite undesired outcome, limit the 1334 * total number of EAP round-trips and abort authentication if 1335 * this limit is exceeded. 1336 */ 1337 if (sm->num_rounds == EAP_MAX_AUTH_ROUNDS + 1) { 1338 wpa_msg(sm->msg_ctx, MSG_INFO, "EAP: more than %d " 1339 "authentication rounds - abort", 1340 EAP_MAX_AUTH_ROUNDS); 1341 sm->num_rounds++; 1342 SM_ENTER_GLOBAL(EAP, FAILURE); 1343 } 1344 } else { 1345 /* Local transitions */ 1346 eap_peer_sm_step_local(sm); 1347 } 1348 } 1349 1350 1351 static Boolean eap_sm_allowMethod(struct eap_sm *sm, int vendor, 1352 EapType method) 1353 { 1354 if (!eap_allowed_method(sm, vendor, method)) { 1355 wpa_printf(MSG_DEBUG, "EAP: configuration does not allow: " 1356 "vendor %u method %u", vendor, method); 1357 return FALSE; 1358 } 1359 if (eap_peer_get_eap_method(vendor, method)) 1360 return TRUE; 1361 wpa_printf(MSG_DEBUG, "EAP: not included in build: " 1362 "vendor %u method %u", vendor, method); 1363 return FALSE; 1364 } 1365 1366 1367 static struct wpabuf * eap_sm_build_expanded_nak( 1368 struct eap_sm *sm, int id, const struct eap_method *methods, 1369 size_t count) 1370 { 1371 struct wpabuf *resp; 1372 int found = 0; 1373 const struct eap_method *m; 1374 1375 wpa_printf(MSG_DEBUG, "EAP: Building expanded EAP-Nak"); 1376 1377 /* RFC 3748 - 5.3.2: Expanded Nak */ 1378 resp = eap_msg_alloc(EAP_VENDOR_IETF, EAP_TYPE_EXPANDED, 1379 8 + 8 * (count + 1), EAP_CODE_RESPONSE, id); 1380 if (resp == NULL) 1381 return NULL; 1382 1383 wpabuf_put_be24(resp, EAP_VENDOR_IETF); 1384 wpabuf_put_be32(resp, EAP_TYPE_NAK); 1385 1386 for (m = methods; m; m = m->next) { 1387 if (sm->reqVendor == m->vendor && 1388 sm->reqVendorMethod == m->method) 1389 continue; /* do not allow the current method again */ 1390 if (eap_allowed_method(sm, m->vendor, m->method)) { 1391 wpa_printf(MSG_DEBUG, "EAP: allowed type: " 1392 "vendor=%u method=%u", 1393 m->vendor, m->method); 1394 wpabuf_put_u8(resp, EAP_TYPE_EXPANDED); 1395 wpabuf_put_be24(resp, m->vendor); 1396 wpabuf_put_be32(resp, m->method); 1397 1398 found++; 1399 } 1400 } 1401 if (!found) { 1402 wpa_printf(MSG_DEBUG, "EAP: no more allowed methods"); 1403 wpabuf_put_u8(resp, EAP_TYPE_EXPANDED); 1404 wpabuf_put_be24(resp, EAP_VENDOR_IETF); 1405 wpabuf_put_be32(resp, EAP_TYPE_NONE); 1406 } 1407 1408 eap_update_len(resp); 1409 1410 return resp; 1411 } 1412 1413 1414 static struct wpabuf * eap_sm_buildNak(struct eap_sm *sm, int id) 1415 { 1416 struct wpabuf *resp; 1417 u8 *start; 1418 int found = 0, expanded_found = 0; 1419 size_t count; 1420 const struct eap_method *methods, *m; 1421 1422 wpa_printf(MSG_DEBUG, "EAP: Building EAP-Nak (requested type %u " 1423 "vendor=%u method=%u not allowed)", sm->reqMethod, 1424 sm->reqVendor, sm->reqVendorMethod); 1425 methods = eap_peer_get_methods(&count); 1426 if (methods == NULL) 1427 return NULL; 1428 if (sm->reqMethod == EAP_TYPE_EXPANDED) 1429 return eap_sm_build_expanded_nak(sm, id, methods, count); 1430 1431 /* RFC 3748 - 5.3.1: Legacy Nak */ 1432 resp = eap_msg_alloc(EAP_VENDOR_IETF, EAP_TYPE_NAK, 1433 sizeof(struct eap_hdr) + 1 + count + 1, 1434 EAP_CODE_RESPONSE, id); 1435 if (resp == NULL) 1436 return NULL; 1437 1438 start = wpabuf_put(resp, 0); 1439 for (m = methods; m; m = m->next) { 1440 if (m->vendor == EAP_VENDOR_IETF && m->method == sm->reqMethod) 1441 continue; /* do not allow the current method again */ 1442 if (eap_allowed_method(sm, m->vendor, m->method)) { 1443 if (m->vendor != EAP_VENDOR_IETF) { 1444 if (expanded_found) 1445 continue; 1446 expanded_found = 1; 1447 wpabuf_put_u8(resp, EAP_TYPE_EXPANDED); 1448 } else 1449 wpabuf_put_u8(resp, m->method); 1450 found++; 1451 } 1452 } 1453 if (!found) 1454 wpabuf_put_u8(resp, EAP_TYPE_NONE); 1455 wpa_hexdump(MSG_DEBUG, "EAP: allowed methods", start, found); 1456 1457 eap_update_len(resp); 1458 1459 return resp; 1460 } 1461 1462 1463 static void eap_sm_processIdentity(struct eap_sm *sm, const struct wpabuf *req) 1464 { 1465 const u8 *pos; 1466 size_t msg_len; 1467 1468 wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_STARTED 1469 "EAP authentication started"); 1470 eap_notify_status(sm, "started", ""); 1471 1472 pos = eap_hdr_validate(EAP_VENDOR_IETF, EAP_TYPE_IDENTITY, req, 1473 &msg_len); 1474 if (pos == NULL) 1475 return; 1476 1477 /* 1478 * RFC 3748 - 5.1: Identity 1479 * Data field may contain a displayable message in UTF-8. If this 1480 * includes NUL-character, only the data before that should be 1481 * displayed. Some EAP implementasitons may piggy-back additional 1482 * options after the NUL. 1483 */ 1484 /* TODO: could save displayable message so that it can be shown to the 1485 * user in case of interaction is required */ 1486 wpa_hexdump_ascii(MSG_DEBUG, "EAP: EAP-Request Identity data", 1487 pos, msg_len); 1488 } 1489 1490 1491 #ifdef PCSC_FUNCS 1492 1493 /* 1494 * Rules for figuring out MNC length based on IMSI for SIM cards that do not 1495 * include MNC length field. 1496 */ 1497 static int mnc_len_from_imsi(const char *imsi) 1498 { 1499 char mcc_str[4]; 1500 unsigned int mcc; 1501 1502 os_memcpy(mcc_str, imsi, 3); 1503 mcc_str[3] = '\0'; 1504 mcc = atoi(mcc_str); 1505 1506 if (mcc == 228) 1507 return 2; /* Networks in Switzerland use 2-digit MNC */ 1508 if (mcc == 244) 1509 return 2; /* Networks in Finland use 2-digit MNC */ 1510 1511 return -1; 1512 } 1513 1514 1515 static int eap_sm_imsi_identity(struct eap_sm *sm, 1516 struct eap_peer_config *conf) 1517 { 1518 enum { EAP_SM_SIM, EAP_SM_AKA, EAP_SM_AKA_PRIME } method = EAP_SM_SIM; 1519 char imsi[100]; 1520 size_t imsi_len; 1521 struct eap_method_type *m = conf->eap_methods; 1522 int i, mnc_len; 1523 1524 imsi_len = sizeof(imsi); 1525 if (scard_get_imsi(sm->scard_ctx, imsi, &imsi_len)) { 1526 wpa_printf(MSG_WARNING, "Failed to get IMSI from SIM"); 1527 return -1; 1528 } 1529 1530 wpa_hexdump_ascii(MSG_DEBUG, "IMSI", (u8 *) imsi, imsi_len); 1531 1532 if (imsi_len < 7) { 1533 wpa_printf(MSG_WARNING, "Too short IMSI for SIM identity"); 1534 return -1; 1535 } 1536 1537 /* MNC (2 or 3 digits) */ 1538 mnc_len = scard_get_mnc_len(sm->scard_ctx); 1539 if (mnc_len < 0) 1540 mnc_len = mnc_len_from_imsi(imsi); 1541 if (mnc_len < 0) { 1542 wpa_printf(MSG_INFO, "Failed to get MNC length from (U)SIM " 1543 "assuming 3"); 1544 mnc_len = 3; 1545 } 1546 1547 if (eap_sm_append_3gpp_realm(sm, imsi, sizeof(imsi), &imsi_len, 1548 mnc_len) < 0) { 1549 wpa_printf(MSG_WARNING, "Could not add realm to SIM identity"); 1550 return -1; 1551 } 1552 wpa_hexdump_ascii(MSG_DEBUG, "IMSI + realm", (u8 *) imsi, imsi_len); 1553 1554 for (i = 0; m && (m[i].vendor != EAP_VENDOR_IETF || 1555 m[i].method != EAP_TYPE_NONE); i++) { 1556 if (m[i].vendor == EAP_VENDOR_IETF && 1557 m[i].method == EAP_TYPE_AKA_PRIME) { 1558 method = EAP_SM_AKA_PRIME; 1559 break; 1560 } 1561 1562 if (m[i].vendor == EAP_VENDOR_IETF && 1563 m[i].method == EAP_TYPE_AKA) { 1564 method = EAP_SM_AKA; 1565 break; 1566 } 1567 } 1568 1569 os_free(conf->identity); 1570 conf->identity = os_malloc(1 + imsi_len); 1571 if (conf->identity == NULL) { 1572 wpa_printf(MSG_WARNING, "Failed to allocate buffer for " 1573 "IMSI-based identity"); 1574 return -1; 1575 } 1576 1577 switch (method) { 1578 case EAP_SM_SIM: 1579 conf->identity[0] = '1'; 1580 break; 1581 case EAP_SM_AKA: 1582 conf->identity[0] = '0'; 1583 break; 1584 case EAP_SM_AKA_PRIME: 1585 conf->identity[0] = '6'; 1586 break; 1587 } 1588 os_memcpy(conf->identity + 1, imsi, imsi_len); 1589 conf->identity_len = 1 + imsi_len; 1590 1591 return 0; 1592 } 1593 1594 1595 static int eap_sm_set_scard_pin(struct eap_sm *sm, 1596 struct eap_peer_config *conf) 1597 { 1598 if (scard_set_pin(sm->scard_ctx, conf->pin)) { 1599 /* 1600 * Make sure the same PIN is not tried again in order to avoid 1601 * blocking SIM. 1602 */ 1603 os_free(conf->pin); 1604 conf->pin = NULL; 1605 1606 wpa_printf(MSG_WARNING, "PIN validation failed"); 1607 eap_sm_request_pin(sm); 1608 return -1; 1609 } 1610 return 0; 1611 } 1612 1613 1614 static int eap_sm_get_scard_identity(struct eap_sm *sm, 1615 struct eap_peer_config *conf) 1616 { 1617 if (eap_sm_set_scard_pin(sm, conf)) 1618 return -1; 1619 1620 return eap_sm_imsi_identity(sm, conf); 1621 } 1622 1623 #endif /* PCSC_FUNCS */ 1624 1625 1626 /** 1627 * eap_sm_buildIdentity - Build EAP-Identity/Response for the current network 1628 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 1629 * @id: EAP identifier for the packet 1630 * @encrypted: Whether the packet is for encrypted tunnel (EAP phase 2) 1631 * Returns: Pointer to the allocated EAP-Identity/Response packet or %NULL on 1632 * failure 1633 * 1634 * This function allocates and builds an EAP-Identity/Response packet for the 1635 * current network. The caller is responsible for freeing the returned data. 1636 */ 1637 struct wpabuf * eap_sm_buildIdentity(struct eap_sm *sm, int id, int encrypted) 1638 { 1639 struct eap_peer_config *config = eap_get_config(sm); 1640 struct wpabuf *resp; 1641 const u8 *identity; 1642 size_t identity_len; 1643 1644 if (config == NULL) { 1645 wpa_printf(MSG_WARNING, "EAP: buildIdentity: configuration " 1646 "was not available"); 1647 return NULL; 1648 } 1649 1650 if (sm->m && sm->m->get_identity && 1651 (identity = sm->m->get_identity(sm, sm->eap_method_priv, 1652 &identity_len)) != NULL) { 1653 wpa_hexdump_ascii(MSG_DEBUG, "EAP: using method re-auth " 1654 "identity", identity, identity_len); 1655 } else if (!encrypted && config->anonymous_identity) { 1656 identity = config->anonymous_identity; 1657 identity_len = config->anonymous_identity_len; 1658 wpa_hexdump_ascii(MSG_DEBUG, "EAP: using anonymous identity", 1659 identity, identity_len); 1660 } else { 1661 identity = config->identity; 1662 identity_len = config->identity_len; 1663 wpa_hexdump_ascii(MSG_DEBUG, "EAP: using real identity", 1664 identity, identity_len); 1665 } 1666 1667 if (config->pcsc) { 1668 #ifdef PCSC_FUNCS 1669 if (!identity) { 1670 if (eap_sm_get_scard_identity(sm, config) < 0) 1671 return NULL; 1672 identity = config->identity; 1673 identity_len = config->identity_len; 1674 wpa_hexdump_ascii(MSG_DEBUG, 1675 "permanent identity from IMSI", 1676 identity, identity_len); 1677 } else if (eap_sm_set_scard_pin(sm, config) < 0) { 1678 return NULL; 1679 } 1680 #else /* PCSC_FUNCS */ 1681 return NULL; 1682 #endif /* PCSC_FUNCS */ 1683 } else if (!identity) { 1684 wpa_printf(MSG_WARNING, 1685 "EAP: buildIdentity: identity configuration was not available"); 1686 eap_sm_request_identity(sm); 1687 return NULL; 1688 } 1689 1690 resp = eap_msg_alloc(EAP_VENDOR_IETF, EAP_TYPE_IDENTITY, identity_len, 1691 EAP_CODE_RESPONSE, id); 1692 if (resp == NULL) 1693 return NULL; 1694 1695 wpabuf_put_data(resp, identity, identity_len); 1696 1697 return resp; 1698 } 1699 1700 1701 static void eap_sm_processNotify(struct eap_sm *sm, const struct wpabuf *req) 1702 { 1703 const u8 *pos; 1704 char *msg; 1705 size_t i, msg_len; 1706 1707 pos = eap_hdr_validate(EAP_VENDOR_IETF, EAP_TYPE_NOTIFICATION, req, 1708 &msg_len); 1709 if (pos == NULL) 1710 return; 1711 wpa_hexdump_ascii(MSG_DEBUG, "EAP: EAP-Request Notification data", 1712 pos, msg_len); 1713 1714 msg = os_malloc(msg_len + 1); 1715 if (msg == NULL) 1716 return; 1717 for (i = 0; i < msg_len; i++) 1718 msg[i] = isprint(pos[i]) ? (char) pos[i] : '_'; 1719 msg[msg_len] = '\0'; 1720 wpa_msg(sm->msg_ctx, MSG_INFO, "%s%s", 1721 WPA_EVENT_EAP_NOTIFICATION, msg); 1722 os_free(msg); 1723 } 1724 1725 1726 static struct wpabuf * eap_sm_buildNotify(int id) 1727 { 1728 wpa_printf(MSG_DEBUG, "EAP: Generating EAP-Response Notification"); 1729 return eap_msg_alloc(EAP_VENDOR_IETF, EAP_TYPE_NOTIFICATION, 0, 1730 EAP_CODE_RESPONSE, id); 1731 } 1732 1733 1734 static void eap_peer_initiate(struct eap_sm *sm, const struct eap_hdr *hdr, 1735 size_t len) 1736 { 1737 #ifdef CONFIG_ERP 1738 const u8 *pos = (const u8 *) (hdr + 1); 1739 const u8 *end = ((const u8 *) hdr) + len; 1740 struct erp_tlvs parse; 1741 1742 if (len < sizeof(*hdr) + 1) { 1743 wpa_printf(MSG_DEBUG, "EAP: Ignored too short EAP-Initiate"); 1744 return; 1745 } 1746 1747 if (*pos != EAP_ERP_TYPE_REAUTH_START) { 1748 wpa_printf(MSG_DEBUG, 1749 "EAP: Ignored unexpected EAP-Initiate Type=%u", 1750 *pos); 1751 return; 1752 } 1753 1754 pos++; 1755 if (pos >= end) { 1756 wpa_printf(MSG_DEBUG, 1757 "EAP: Too short EAP-Initiate/Re-auth-Start"); 1758 return; 1759 } 1760 pos++; /* Reserved */ 1761 wpa_hexdump(MSG_DEBUG, "EAP: EAP-Initiate/Re-auth-Start TVs/TLVs", 1762 pos, end - pos); 1763 1764 if (erp_parse_tlvs(pos, end, &parse, 0) < 0) 1765 goto invalid; 1766 1767 if (parse.domain) { 1768 wpa_hexdump_ascii(MSG_DEBUG, 1769 "EAP: EAP-Initiate/Re-auth-Start - Domain name", 1770 parse.domain, parse.domain_len); 1771 /* TODO: Derivation of domain specific keys for local ER */ 1772 } 1773 1774 if (eap_peer_erp_reauth_start(sm, hdr->identifier) == 0) 1775 return; 1776 1777 invalid: 1778 #endif /* CONFIG_ERP */ 1779 wpa_printf(MSG_DEBUG, 1780 "EAP: EAP-Initiate/Re-auth-Start - No suitable ERP keys available - try to start full EAP authentication"); 1781 eapol_set_bool(sm, EAPOL_eapTriggerStart, TRUE); 1782 } 1783 1784 1785 void eap_peer_finish(struct eap_sm *sm, const struct eap_hdr *hdr, size_t len) 1786 { 1787 #ifdef CONFIG_ERP 1788 const u8 *pos = (const u8 *) (hdr + 1); 1789 const u8 *end = ((const u8 *) hdr) + len; 1790 const u8 *start; 1791 struct erp_tlvs parse; 1792 u8 flags; 1793 u16 seq; 1794 u8 hash[SHA256_MAC_LEN]; 1795 size_t hash_len; 1796 struct eap_erp_key *erp; 1797 int max_len; 1798 char nai[254]; 1799 u8 seed[4]; 1800 int auth_tag_ok = 0; 1801 1802 if (len < sizeof(*hdr) + 1) { 1803 wpa_printf(MSG_DEBUG, "EAP: Ignored too short EAP-Finish"); 1804 return; 1805 } 1806 1807 if (*pos != EAP_ERP_TYPE_REAUTH) { 1808 wpa_printf(MSG_DEBUG, 1809 "EAP: Ignored unexpected EAP-Finish Type=%u", *pos); 1810 return; 1811 } 1812 1813 if (len < sizeof(*hdr) + 4) { 1814 wpa_printf(MSG_DEBUG, 1815 "EAP: Ignored too short EAP-Finish/Re-auth"); 1816 return; 1817 } 1818 1819 pos++; 1820 flags = *pos++; 1821 seq = WPA_GET_BE16(pos); 1822 pos += 2; 1823 wpa_printf(MSG_DEBUG, "EAP: Flags=0x%x SEQ=%u", flags, seq); 1824 1825 if (seq != sm->erp_seq) { 1826 wpa_printf(MSG_DEBUG, 1827 "EAP: Unexpected EAP-Finish/Re-auth SEQ=%u", seq); 1828 return; 1829 } 1830 1831 /* 1832 * Parse TVs/TLVs. Since we do not yet know the length of the 1833 * Authentication Tag, stop parsing if an unknown TV/TLV is seen and 1834 * just try to find the keyName-NAI first so that we can check the 1835 * Authentication Tag. 1836 */ 1837 if (erp_parse_tlvs(pos, end, &parse, 1) < 0) 1838 return; 1839 1840 if (!parse.keyname) { 1841 wpa_printf(MSG_DEBUG, 1842 "EAP: No keyName-NAI in EAP-Finish/Re-auth Packet"); 1843 return; 1844 } 1845 1846 wpa_hexdump_ascii(MSG_DEBUG, "EAP: EAP-Finish/Re-auth - keyName-NAI", 1847 parse.keyname, parse.keyname_len); 1848 if (parse.keyname_len > 253) { 1849 wpa_printf(MSG_DEBUG, 1850 "EAP: Too long keyName-NAI in EAP-Finish/Re-auth"); 1851 return; 1852 } 1853 os_memcpy(nai, parse.keyname, parse.keyname_len); 1854 nai[parse.keyname_len] = '\0'; 1855 1856 erp = eap_erp_get_key_nai(sm, nai); 1857 if (!erp) { 1858 wpa_printf(MSG_DEBUG, "EAP: No matching ERP key found for %s", 1859 nai); 1860 return; 1861 } 1862 1863 /* Is there enough room for Cryptosuite and Authentication Tag? */ 1864 start = parse.keyname + parse.keyname_len; 1865 max_len = end - start; 1866 hash_len = 16; 1867 if (max_len < 1 + (int) hash_len) { 1868 wpa_printf(MSG_DEBUG, 1869 "EAP: Not enough room for Authentication Tag"); 1870 if (flags & 0x80) 1871 goto no_auth_tag; 1872 return; 1873 } 1874 if (end[-17] != EAP_ERP_CS_HMAC_SHA256_128) { 1875 wpa_printf(MSG_DEBUG, "EAP: Different Cryptosuite used"); 1876 if (flags & 0x80) 1877 goto no_auth_tag; 1878 return; 1879 } 1880 1881 if (hmac_sha256(erp->rIK, erp->rIK_len, (const u8 *) hdr, 1882 end - ((const u8 *) hdr) - hash_len, hash) < 0) 1883 return; 1884 if (os_memcmp(end - hash_len, hash, hash_len) != 0) { 1885 wpa_printf(MSG_DEBUG, 1886 "EAP: Authentication Tag mismatch"); 1887 return; 1888 } 1889 auth_tag_ok = 1; 1890 end -= 1 + hash_len; 1891 1892 no_auth_tag: 1893 /* 1894 * Parse TVs/TLVs again now that we know the exact part of the buffer 1895 * that contains them. 1896 */ 1897 wpa_hexdump(MSG_DEBUG, "EAP: EAP-Finish/Re-Auth TVs/TLVs", 1898 pos, end - pos); 1899 if (erp_parse_tlvs(pos, end, &parse, 0) < 0) 1900 return; 1901 1902 if (flags & 0x80 || !auth_tag_ok) { 1903 wpa_printf(MSG_DEBUG, 1904 "EAP: EAP-Finish/Re-auth indicated failure"); 1905 eapol_set_bool(sm, EAPOL_eapFail, TRUE); 1906 eapol_set_bool(sm, EAPOL_eapReq, FALSE); 1907 eapol_set_bool(sm, EAPOL_eapNoResp, TRUE); 1908 wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_FAILURE 1909 "EAP authentication failed"); 1910 sm->prev_failure = 1; 1911 wpa_printf(MSG_DEBUG, 1912 "EAP: Drop ERP key to try full authentication on next attempt"); 1913 eap_peer_erp_free_key(erp); 1914 return; 1915 } 1916 1917 eap_sm_free_key(sm); 1918 sm->eapKeyDataLen = 0; 1919 sm->eapKeyData = os_malloc(erp->rRK_len); 1920 if (!sm->eapKeyData) 1921 return; 1922 sm->eapKeyDataLen = erp->rRK_len; 1923 1924 WPA_PUT_BE16(seed, seq); 1925 WPA_PUT_BE16(&seed[2], erp->rRK_len); 1926 if (hmac_sha256_kdf(erp->rRK, erp->rRK_len, 1927 "Re-authentication Master Session Key@ietf.org", 1928 seed, sizeof(seed), 1929 sm->eapKeyData, erp->rRK_len) < 0) { 1930 wpa_printf(MSG_DEBUG, "EAP: Could not derive rMSK for ERP"); 1931 eap_sm_free_key(sm); 1932 return; 1933 } 1934 wpa_hexdump_key(MSG_DEBUG, "EAP: ERP rMSK", 1935 sm->eapKeyData, sm->eapKeyDataLen); 1936 sm->eapKeyAvailable = TRUE; 1937 eapol_set_bool(sm, EAPOL_eapSuccess, TRUE); 1938 eapol_set_bool(sm, EAPOL_eapReq, FALSE); 1939 eapol_set_bool(sm, EAPOL_eapNoResp, TRUE); 1940 wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_SUCCESS 1941 "EAP re-authentication completed successfully"); 1942 #endif /* CONFIG_ERP */ 1943 } 1944 1945 1946 static void eap_sm_parseEapReq(struct eap_sm *sm, const struct wpabuf *req) 1947 { 1948 const struct eap_hdr *hdr; 1949 size_t plen; 1950 const u8 *pos; 1951 1952 sm->rxReq = sm->rxResp = sm->rxSuccess = sm->rxFailure = FALSE; 1953 sm->reqId = 0; 1954 sm->reqMethod = EAP_TYPE_NONE; 1955 sm->reqVendor = EAP_VENDOR_IETF; 1956 sm->reqVendorMethod = EAP_TYPE_NONE; 1957 1958 if (req == NULL || wpabuf_len(req) < sizeof(*hdr)) 1959 return; 1960 1961 hdr = wpabuf_head(req); 1962 plen = be_to_host16(hdr->length); 1963 if (plen > wpabuf_len(req)) { 1964 wpa_printf(MSG_DEBUG, "EAP: Ignored truncated EAP-Packet " 1965 "(len=%lu plen=%lu)", 1966 (unsigned long) wpabuf_len(req), 1967 (unsigned long) plen); 1968 return; 1969 } 1970 1971 sm->reqId = hdr->identifier; 1972 1973 if (sm->workaround) { 1974 const u8 *addr[1]; 1975 addr[0] = wpabuf_head(req); 1976 sha1_vector(1, addr, &plen, sm->req_sha1); 1977 } 1978 1979 switch (hdr->code) { 1980 case EAP_CODE_REQUEST: 1981 if (plen < sizeof(*hdr) + 1) { 1982 wpa_printf(MSG_DEBUG, "EAP: Too short EAP-Request - " 1983 "no Type field"); 1984 return; 1985 } 1986 sm->rxReq = TRUE; 1987 pos = (const u8 *) (hdr + 1); 1988 sm->reqMethod = *pos++; 1989 if (sm->reqMethod == EAP_TYPE_EXPANDED) { 1990 if (plen < sizeof(*hdr) + 8) { 1991 wpa_printf(MSG_DEBUG, "EAP: Ignored truncated " 1992 "expanded EAP-Packet (plen=%lu)", 1993 (unsigned long) plen); 1994 return; 1995 } 1996 sm->reqVendor = WPA_GET_BE24(pos); 1997 pos += 3; 1998 sm->reqVendorMethod = WPA_GET_BE32(pos); 1999 } 2000 wpa_printf(MSG_DEBUG, "EAP: Received EAP-Request id=%d " 2001 "method=%u vendor=%u vendorMethod=%u", 2002 sm->reqId, sm->reqMethod, sm->reqVendor, 2003 sm->reqVendorMethod); 2004 break; 2005 case EAP_CODE_RESPONSE: 2006 if (sm->selectedMethod == EAP_TYPE_LEAP) { 2007 /* 2008 * LEAP differs from RFC 4137 by using reversed roles 2009 * for mutual authentication and because of this, we 2010 * need to accept EAP-Response frames if LEAP is used. 2011 */ 2012 if (plen < sizeof(*hdr) + 1) { 2013 wpa_printf(MSG_DEBUG, "EAP: Too short " 2014 "EAP-Response - no Type field"); 2015 return; 2016 } 2017 sm->rxResp = TRUE; 2018 pos = (const u8 *) (hdr + 1); 2019 sm->reqMethod = *pos; 2020 wpa_printf(MSG_DEBUG, "EAP: Received EAP-Response for " 2021 "LEAP method=%d id=%d", 2022 sm->reqMethod, sm->reqId); 2023 break; 2024 } 2025 wpa_printf(MSG_DEBUG, "EAP: Ignored EAP-Response"); 2026 break; 2027 case EAP_CODE_SUCCESS: 2028 wpa_printf(MSG_DEBUG, "EAP: Received EAP-Success"); 2029 eap_notify_status(sm, "completion", "success"); 2030 sm->rxSuccess = TRUE; 2031 break; 2032 case EAP_CODE_FAILURE: 2033 wpa_printf(MSG_DEBUG, "EAP: Received EAP-Failure"); 2034 eap_notify_status(sm, "completion", "failure"); 2035 2036 /* Get the error code from method */ 2037 if (sm->m && sm->m->get_error_code) { 2038 int error_code; 2039 2040 error_code = sm->m->get_error_code(sm->eap_method_priv); 2041 if (error_code != NO_EAP_METHOD_ERROR) 2042 eap_report_error(sm, error_code); 2043 } 2044 sm->rxFailure = TRUE; 2045 break; 2046 case EAP_CODE_INITIATE: 2047 eap_peer_initiate(sm, hdr, plen); 2048 break; 2049 case EAP_CODE_FINISH: 2050 eap_peer_finish(sm, hdr, plen); 2051 break; 2052 default: 2053 wpa_printf(MSG_DEBUG, "EAP: Ignored EAP-Packet with unknown " 2054 "code %d", hdr->code); 2055 break; 2056 } 2057 } 2058 2059 2060 static void eap_peer_sm_tls_event(void *ctx, enum tls_event ev, 2061 union tls_event_data *data) 2062 { 2063 struct eap_sm *sm = ctx; 2064 char *hash_hex = NULL; 2065 2066 switch (ev) { 2067 case TLS_CERT_CHAIN_SUCCESS: 2068 eap_notify_status(sm, "remote certificate verification", 2069 "success"); 2070 if (sm->ext_cert_check) { 2071 sm->waiting_ext_cert_check = 1; 2072 eap_sm_request(sm, WPA_CTRL_REQ_EXT_CERT_CHECK, 2073 NULL, 0); 2074 } 2075 break; 2076 case TLS_CERT_CHAIN_FAILURE: 2077 wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_TLS_CERT_ERROR 2078 "reason=%d depth=%d subject='%s' err='%s'", 2079 data->cert_fail.reason, 2080 data->cert_fail.depth, 2081 data->cert_fail.subject, 2082 data->cert_fail.reason_txt); 2083 eap_notify_status(sm, "remote certificate verification", 2084 data->cert_fail.reason_txt); 2085 break; 2086 case TLS_PEER_CERTIFICATE: 2087 if (!sm->eapol_cb->notify_cert) 2088 break; 2089 2090 if (data->peer_cert.hash) { 2091 size_t len = data->peer_cert.hash_len * 2 + 1; 2092 hash_hex = os_malloc(len); 2093 if (hash_hex) { 2094 wpa_snprintf_hex(hash_hex, len, 2095 data->peer_cert.hash, 2096 data->peer_cert.hash_len); 2097 } 2098 } 2099 2100 sm->eapol_cb->notify_cert(sm->eapol_ctx, &data->peer_cert, 2101 hash_hex); 2102 break; 2103 case TLS_ALERT: 2104 if (data->alert.is_local) 2105 eap_notify_status(sm, "local TLS alert", 2106 data->alert.description); 2107 else 2108 eap_notify_status(sm, "remote TLS alert", 2109 data->alert.description); 2110 break; 2111 } 2112 2113 os_free(hash_hex); 2114 } 2115 2116 2117 /** 2118 * eap_peer_sm_init - Allocate and initialize EAP peer state machine 2119 * @eapol_ctx: Context data to be used with eapol_cb calls 2120 * @eapol_cb: Pointer to EAPOL callback functions 2121 * @msg_ctx: Context data for wpa_msg() calls 2122 * @conf: EAP configuration 2123 * Returns: Pointer to the allocated EAP state machine or %NULL on failure 2124 * 2125 * This function allocates and initializes an EAP state machine. In addition, 2126 * this initializes TLS library for the new EAP state machine. eapol_cb pointer 2127 * will be in use until eap_peer_sm_deinit() is used to deinitialize this EAP 2128 * state machine. Consequently, the caller must make sure that this data 2129 * structure remains alive while the EAP state machine is active. 2130 */ 2131 struct eap_sm * eap_peer_sm_init(void *eapol_ctx, 2132 const struct eapol_callbacks *eapol_cb, 2133 void *msg_ctx, struct eap_config *conf) 2134 { 2135 struct eap_sm *sm; 2136 struct tls_config tlsconf; 2137 2138 sm = os_zalloc(sizeof(*sm)); 2139 if (sm == NULL) 2140 return NULL; 2141 sm->eapol_ctx = eapol_ctx; 2142 sm->eapol_cb = eapol_cb; 2143 sm->msg_ctx = msg_ctx; 2144 sm->ClientTimeout = EAP_CLIENT_TIMEOUT_DEFAULT; 2145 sm->wps = conf->wps; 2146 dl_list_init(&sm->erp_keys); 2147 2148 os_memset(&tlsconf, 0, sizeof(tlsconf)); 2149 tlsconf.opensc_engine_path = conf->opensc_engine_path; 2150 tlsconf.pkcs11_engine_path = conf->pkcs11_engine_path; 2151 tlsconf.pkcs11_module_path = conf->pkcs11_module_path; 2152 tlsconf.openssl_ciphers = conf->openssl_ciphers; 2153 #ifdef CONFIG_FIPS 2154 tlsconf.fips_mode = 1; 2155 #endif /* CONFIG_FIPS */ 2156 tlsconf.event_cb = eap_peer_sm_tls_event; 2157 tlsconf.cb_ctx = sm; 2158 tlsconf.cert_in_cb = conf->cert_in_cb; 2159 sm->ssl_ctx = tls_init(&tlsconf); 2160 if (sm->ssl_ctx == NULL) { 2161 wpa_printf(MSG_WARNING, "SSL: Failed to initialize TLS " 2162 "context."); 2163 os_free(sm); 2164 return NULL; 2165 } 2166 2167 sm->ssl_ctx2 = tls_init(&tlsconf); 2168 if (sm->ssl_ctx2 == NULL) { 2169 wpa_printf(MSG_INFO, "SSL: Failed to initialize TLS " 2170 "context (2)."); 2171 /* Run without separate TLS context within TLS tunnel */ 2172 } 2173 2174 return sm; 2175 } 2176 2177 2178 /** 2179 * eap_peer_sm_deinit - Deinitialize and free an EAP peer state machine 2180 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2181 * 2182 * This function deinitializes EAP state machine and frees all allocated 2183 * resources. 2184 */ 2185 void eap_peer_sm_deinit(struct eap_sm *sm) 2186 { 2187 if (sm == NULL) 2188 return; 2189 eap_deinit_prev_method(sm, "EAP deinit"); 2190 eap_sm_abort(sm); 2191 if (sm->ssl_ctx2) 2192 tls_deinit(sm->ssl_ctx2); 2193 tls_deinit(sm->ssl_ctx); 2194 eap_peer_erp_free_keys(sm); 2195 os_free(sm); 2196 } 2197 2198 2199 /** 2200 * eap_peer_sm_step - Step EAP peer state machine 2201 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2202 * Returns: 1 if EAP state was changed or 0 if not 2203 * 2204 * This function advances EAP state machine to a new state to match with the 2205 * current variables. This should be called whenever variables used by the EAP 2206 * state machine have changed. 2207 */ 2208 int eap_peer_sm_step(struct eap_sm *sm) 2209 { 2210 int res = 0; 2211 do { 2212 sm->changed = FALSE; 2213 SM_STEP_RUN(EAP); 2214 if (sm->changed) 2215 res = 1; 2216 } while (sm->changed); 2217 return res; 2218 } 2219 2220 2221 /** 2222 * eap_sm_abort - Abort EAP authentication 2223 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2224 * 2225 * Release system resources that have been allocated for the authentication 2226 * session without fully deinitializing the EAP state machine. 2227 */ 2228 void eap_sm_abort(struct eap_sm *sm) 2229 { 2230 wpabuf_free(sm->lastRespData); 2231 sm->lastRespData = NULL; 2232 wpabuf_free(sm->eapRespData); 2233 sm->eapRespData = NULL; 2234 eap_sm_free_key(sm); 2235 os_free(sm->eapSessionId); 2236 sm->eapSessionId = NULL; 2237 2238 /* This is not clearly specified in the EAP statemachines draft, but 2239 * it seems necessary to make sure that some of the EAPOL variables get 2240 * cleared for the next authentication. */ 2241 eapol_set_bool(sm, EAPOL_eapSuccess, FALSE); 2242 } 2243 2244 2245 #ifdef CONFIG_CTRL_IFACE 2246 static const char * eap_sm_state_txt(int state) 2247 { 2248 switch (state) { 2249 case EAP_INITIALIZE: 2250 return "INITIALIZE"; 2251 case EAP_DISABLED: 2252 return "DISABLED"; 2253 case EAP_IDLE: 2254 return "IDLE"; 2255 case EAP_RECEIVED: 2256 return "RECEIVED"; 2257 case EAP_GET_METHOD: 2258 return "GET_METHOD"; 2259 case EAP_METHOD: 2260 return "METHOD"; 2261 case EAP_SEND_RESPONSE: 2262 return "SEND_RESPONSE"; 2263 case EAP_DISCARD: 2264 return "DISCARD"; 2265 case EAP_IDENTITY: 2266 return "IDENTITY"; 2267 case EAP_NOTIFICATION: 2268 return "NOTIFICATION"; 2269 case EAP_RETRANSMIT: 2270 return "RETRANSMIT"; 2271 case EAP_SUCCESS: 2272 return "SUCCESS"; 2273 case EAP_FAILURE: 2274 return "FAILURE"; 2275 default: 2276 return "UNKNOWN"; 2277 } 2278 } 2279 #endif /* CONFIG_CTRL_IFACE */ 2280 2281 2282 #if defined(CONFIG_CTRL_IFACE) || !defined(CONFIG_NO_STDOUT_DEBUG) 2283 static const char * eap_sm_method_state_txt(EapMethodState state) 2284 { 2285 switch (state) { 2286 case METHOD_NONE: 2287 return "NONE"; 2288 case METHOD_INIT: 2289 return "INIT"; 2290 case METHOD_CONT: 2291 return "CONT"; 2292 case METHOD_MAY_CONT: 2293 return "MAY_CONT"; 2294 case METHOD_DONE: 2295 return "DONE"; 2296 default: 2297 return "UNKNOWN"; 2298 } 2299 } 2300 2301 2302 static const char * eap_sm_decision_txt(EapDecision decision) 2303 { 2304 switch (decision) { 2305 case DECISION_FAIL: 2306 return "FAIL"; 2307 case DECISION_COND_SUCC: 2308 return "COND_SUCC"; 2309 case DECISION_UNCOND_SUCC: 2310 return "UNCOND_SUCC"; 2311 default: 2312 return "UNKNOWN"; 2313 } 2314 } 2315 #endif /* CONFIG_CTRL_IFACE || !CONFIG_NO_STDOUT_DEBUG */ 2316 2317 2318 #ifdef CONFIG_CTRL_IFACE 2319 2320 /** 2321 * eap_sm_get_status - Get EAP state machine status 2322 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2323 * @buf: Buffer for status information 2324 * @buflen: Maximum buffer length 2325 * @verbose: Whether to include verbose status information 2326 * Returns: Number of bytes written to buf. 2327 * 2328 * Query EAP state machine for status information. This function fills in a 2329 * text area with current status information from the EAPOL state machine. If 2330 * the buffer (buf) is not large enough, status information will be truncated 2331 * to fit the buffer. 2332 */ 2333 int eap_sm_get_status(struct eap_sm *sm, char *buf, size_t buflen, int verbose) 2334 { 2335 int len, ret; 2336 2337 if (sm == NULL) 2338 return 0; 2339 2340 len = os_snprintf(buf, buflen, 2341 "EAP state=%s\n", 2342 eap_sm_state_txt(sm->EAP_state)); 2343 if (os_snprintf_error(buflen, len)) 2344 return 0; 2345 2346 if (sm->selectedMethod != EAP_TYPE_NONE) { 2347 const char *name; 2348 if (sm->m) { 2349 name = sm->m->name; 2350 } else { 2351 const struct eap_method *m = 2352 eap_peer_get_eap_method(EAP_VENDOR_IETF, 2353 sm->selectedMethod); 2354 if (m) 2355 name = m->name; 2356 else 2357 name = "?"; 2358 } 2359 ret = os_snprintf(buf + len, buflen - len, 2360 "selectedMethod=%d (EAP-%s)\n", 2361 sm->selectedMethod, name); 2362 if (os_snprintf_error(buflen - len, ret)) 2363 return len; 2364 len += ret; 2365 2366 if (sm->m && sm->m->get_status) { 2367 len += sm->m->get_status(sm, sm->eap_method_priv, 2368 buf + len, buflen - len, 2369 verbose); 2370 } 2371 } 2372 2373 if (verbose) { 2374 ret = os_snprintf(buf + len, buflen - len, 2375 "reqMethod=%d\n" 2376 "methodState=%s\n" 2377 "decision=%s\n" 2378 "ClientTimeout=%d\n", 2379 sm->reqMethod, 2380 eap_sm_method_state_txt(sm->methodState), 2381 eap_sm_decision_txt(sm->decision), 2382 sm->ClientTimeout); 2383 if (os_snprintf_error(buflen - len, ret)) 2384 return len; 2385 len += ret; 2386 } 2387 2388 return len; 2389 } 2390 #endif /* CONFIG_CTRL_IFACE */ 2391 2392 2393 static void eap_sm_request(struct eap_sm *sm, enum wpa_ctrl_req_type field, 2394 const char *msg, size_t msglen) 2395 { 2396 #if defined(CONFIG_CTRL_IFACE) || !defined(CONFIG_NO_STDOUT_DEBUG) 2397 struct eap_peer_config *config; 2398 const char *txt = NULL; 2399 char *tmp; 2400 2401 if (sm == NULL) 2402 return; 2403 config = eap_get_config(sm); 2404 if (config == NULL) 2405 return; 2406 2407 switch (field) { 2408 case WPA_CTRL_REQ_EAP_IDENTITY: 2409 config->pending_req_identity++; 2410 break; 2411 case WPA_CTRL_REQ_EAP_PASSWORD: 2412 config->pending_req_password++; 2413 break; 2414 case WPA_CTRL_REQ_EAP_NEW_PASSWORD: 2415 config->pending_req_new_password++; 2416 break; 2417 case WPA_CTRL_REQ_EAP_PIN: 2418 config->pending_req_pin++; 2419 break; 2420 case WPA_CTRL_REQ_EAP_OTP: 2421 if (msg) { 2422 tmp = os_malloc(msglen + 3); 2423 if (tmp == NULL) 2424 return; 2425 tmp[0] = '['; 2426 os_memcpy(tmp + 1, msg, msglen); 2427 tmp[msglen + 1] = ']'; 2428 tmp[msglen + 2] = '\0'; 2429 txt = tmp; 2430 os_free(config->pending_req_otp); 2431 config->pending_req_otp = tmp; 2432 config->pending_req_otp_len = msglen + 3; 2433 } else { 2434 if (config->pending_req_otp == NULL) 2435 return; 2436 txt = config->pending_req_otp; 2437 } 2438 break; 2439 case WPA_CTRL_REQ_EAP_PASSPHRASE: 2440 config->pending_req_passphrase++; 2441 break; 2442 case WPA_CTRL_REQ_SIM: 2443 config->pending_req_sim++; 2444 txt = msg; 2445 break; 2446 case WPA_CTRL_REQ_EXT_CERT_CHECK: 2447 break; 2448 default: 2449 return; 2450 } 2451 2452 if (sm->eapol_cb->eap_param_needed) 2453 sm->eapol_cb->eap_param_needed(sm->eapol_ctx, field, txt); 2454 #endif /* CONFIG_CTRL_IFACE || !CONFIG_NO_STDOUT_DEBUG */ 2455 } 2456 2457 2458 const char * eap_sm_get_method_name(struct eap_sm *sm) 2459 { 2460 if (sm->m == NULL) 2461 return "UNKNOWN"; 2462 return sm->m->name; 2463 } 2464 2465 2466 /** 2467 * eap_sm_request_identity - Request identity from user (ctrl_iface) 2468 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2469 * 2470 * EAP methods can call this function to request identity information for the 2471 * current network. This is normally called when the identity is not included 2472 * in the network configuration. The request will be sent to monitor programs 2473 * through the control interface. 2474 */ 2475 void eap_sm_request_identity(struct eap_sm *sm) 2476 { 2477 eap_sm_request(sm, WPA_CTRL_REQ_EAP_IDENTITY, NULL, 0); 2478 } 2479 2480 2481 /** 2482 * eap_sm_request_password - Request password from user (ctrl_iface) 2483 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2484 * 2485 * EAP methods can call this function to request password information for the 2486 * current network. This is normally called when the password is not included 2487 * in the network configuration. The request will be sent to monitor programs 2488 * through the control interface. 2489 */ 2490 void eap_sm_request_password(struct eap_sm *sm) 2491 { 2492 eap_sm_request(sm, WPA_CTRL_REQ_EAP_PASSWORD, NULL, 0); 2493 } 2494 2495 2496 /** 2497 * eap_sm_request_new_password - Request new password from user (ctrl_iface) 2498 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2499 * 2500 * EAP methods can call this function to request new password information for 2501 * the current network. This is normally called when the EAP method indicates 2502 * that the current password has expired and password change is required. The 2503 * request will be sent to monitor programs through the control interface. 2504 */ 2505 void eap_sm_request_new_password(struct eap_sm *sm) 2506 { 2507 eap_sm_request(sm, WPA_CTRL_REQ_EAP_NEW_PASSWORD, NULL, 0); 2508 } 2509 2510 2511 /** 2512 * eap_sm_request_pin - Request SIM or smart card PIN from user (ctrl_iface) 2513 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2514 * 2515 * EAP methods can call this function to request SIM or smart card PIN 2516 * information for the current network. This is normally called when the PIN is 2517 * not included in the network configuration. The request will be sent to 2518 * monitor programs through the control interface. 2519 */ 2520 void eap_sm_request_pin(struct eap_sm *sm) 2521 { 2522 eap_sm_request(sm, WPA_CTRL_REQ_EAP_PIN, NULL, 0); 2523 } 2524 2525 2526 /** 2527 * eap_sm_request_otp - Request one time password from user (ctrl_iface) 2528 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2529 * @msg: Message to be displayed to the user when asking for OTP 2530 * @msg_len: Length of the user displayable message 2531 * 2532 * EAP methods can call this function to request open time password (OTP) for 2533 * the current network. The request will be sent to monitor programs through 2534 * the control interface. 2535 */ 2536 void eap_sm_request_otp(struct eap_sm *sm, const char *msg, size_t msg_len) 2537 { 2538 eap_sm_request(sm, WPA_CTRL_REQ_EAP_OTP, msg, msg_len); 2539 } 2540 2541 2542 /** 2543 * eap_sm_request_passphrase - Request passphrase from user (ctrl_iface) 2544 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2545 * 2546 * EAP methods can call this function to request passphrase for a private key 2547 * for the current network. This is normally called when the passphrase is not 2548 * included in the network configuration. The request will be sent to monitor 2549 * programs through the control interface. 2550 */ 2551 void eap_sm_request_passphrase(struct eap_sm *sm) 2552 { 2553 eap_sm_request(sm, WPA_CTRL_REQ_EAP_PASSPHRASE, NULL, 0); 2554 } 2555 2556 2557 /** 2558 * eap_sm_request_sim - Request external SIM processing 2559 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2560 * @req: EAP method specific request 2561 */ 2562 void eap_sm_request_sim(struct eap_sm *sm, const char *req) 2563 { 2564 eap_sm_request(sm, WPA_CTRL_REQ_SIM, req, os_strlen(req)); 2565 } 2566 2567 2568 /** 2569 * eap_sm_notify_ctrl_attached - Notification of attached monitor 2570 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2571 * 2572 * Notify EAP state machines that a monitor was attached to the control 2573 * interface to trigger re-sending of pending requests for user input. 2574 */ 2575 void eap_sm_notify_ctrl_attached(struct eap_sm *sm) 2576 { 2577 struct eap_peer_config *config = eap_get_config(sm); 2578 2579 if (config == NULL) 2580 return; 2581 2582 /* Re-send any pending requests for user data since a new control 2583 * interface was added. This handles cases where the EAP authentication 2584 * starts immediately after system startup when the user interface is 2585 * not yet running. */ 2586 if (config->pending_req_identity) 2587 eap_sm_request_identity(sm); 2588 if (config->pending_req_password) 2589 eap_sm_request_password(sm); 2590 if (config->pending_req_new_password) 2591 eap_sm_request_new_password(sm); 2592 if (config->pending_req_otp) 2593 eap_sm_request_otp(sm, NULL, 0); 2594 if (config->pending_req_pin) 2595 eap_sm_request_pin(sm); 2596 if (config->pending_req_passphrase) 2597 eap_sm_request_passphrase(sm); 2598 } 2599 2600 2601 static int eap_allowed_phase2_type(int vendor, int type) 2602 { 2603 if (vendor != EAP_VENDOR_IETF) 2604 return 0; 2605 return type != EAP_TYPE_PEAP && type != EAP_TYPE_TTLS && 2606 type != EAP_TYPE_FAST && type != EAP_TYPE_TEAP; 2607 } 2608 2609 2610 /** 2611 * eap_get_phase2_type - Get EAP type for the given EAP phase 2 method name 2612 * @name: EAP method name, e.g., MD5 2613 * @vendor: Buffer for returning EAP Vendor-Id 2614 * Returns: EAP method type or %EAP_TYPE_NONE if not found 2615 * 2616 * This function maps EAP type names into EAP type numbers that are allowed for 2617 * Phase 2, i.e., for tunneled authentication. Phase 2 is used, e.g., with 2618 * EAP-PEAP, EAP-TTLS, and EAP-FAST. 2619 */ 2620 u32 eap_get_phase2_type(const char *name, int *vendor) 2621 { 2622 int v; 2623 u32 type = eap_peer_get_type(name, &v); 2624 if (eap_allowed_phase2_type(v, type)) { 2625 *vendor = v; 2626 return type; 2627 } 2628 *vendor = EAP_VENDOR_IETF; 2629 return EAP_TYPE_NONE; 2630 } 2631 2632 2633 /** 2634 * eap_get_phase2_types - Get list of allowed EAP phase 2 types 2635 * @config: Pointer to a network configuration 2636 * @count: Pointer to a variable to be filled with number of returned EAP types 2637 * Returns: Pointer to allocated type list or %NULL on failure 2638 * 2639 * This function generates an array of allowed EAP phase 2 (tunneled) types for 2640 * the given network configuration. 2641 */ 2642 struct eap_method_type * eap_get_phase2_types(struct eap_peer_config *config, 2643 size_t *count) 2644 { 2645 struct eap_method_type *buf; 2646 u32 method; 2647 int vendor; 2648 size_t mcount; 2649 const struct eap_method *methods, *m; 2650 2651 methods = eap_peer_get_methods(&mcount); 2652 if (methods == NULL) 2653 return NULL; 2654 *count = 0; 2655 buf = os_malloc(mcount * sizeof(struct eap_method_type)); 2656 if (buf == NULL) 2657 return NULL; 2658 2659 for (m = methods; m; m = m->next) { 2660 vendor = m->vendor; 2661 method = m->method; 2662 if (eap_allowed_phase2_type(vendor, method)) { 2663 if (vendor == EAP_VENDOR_IETF && 2664 method == EAP_TYPE_TLS && config && 2665 config->private_key2 == NULL) 2666 continue; 2667 buf[*count].vendor = vendor; 2668 buf[*count].method = method; 2669 (*count)++; 2670 } 2671 } 2672 2673 return buf; 2674 } 2675 2676 2677 /** 2678 * eap_set_fast_reauth - Update fast_reauth setting 2679 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2680 * @enabled: 1 = Fast reauthentication is enabled, 0 = Disabled 2681 */ 2682 void eap_set_fast_reauth(struct eap_sm *sm, int enabled) 2683 { 2684 sm->fast_reauth = enabled; 2685 } 2686 2687 2688 /** 2689 * eap_set_workaround - Update EAP workarounds setting 2690 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2691 * @workaround: 1 = Enable EAP workarounds, 0 = Disable EAP workarounds 2692 */ 2693 void eap_set_workaround(struct eap_sm *sm, unsigned int workaround) 2694 { 2695 sm->workaround = workaround; 2696 } 2697 2698 2699 /** 2700 * eap_get_config - Get current network configuration 2701 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2702 * Returns: Pointer to the current network configuration or %NULL if not found 2703 * 2704 * EAP peer methods should avoid using this function if they can use other 2705 * access functions, like eap_get_config_identity() and 2706 * eap_get_config_password(), that do not require direct access to 2707 * struct eap_peer_config. 2708 */ 2709 struct eap_peer_config * eap_get_config(struct eap_sm *sm) 2710 { 2711 return sm->eapol_cb->get_config(sm->eapol_ctx); 2712 } 2713 2714 2715 /** 2716 * eap_get_config_identity - Get identity from the network configuration 2717 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2718 * @len: Buffer for the length of the identity 2719 * Returns: Pointer to the identity or %NULL if not found 2720 */ 2721 const u8 * eap_get_config_identity(struct eap_sm *sm, size_t *len) 2722 { 2723 struct eap_peer_config *config = eap_get_config(sm); 2724 if (config == NULL) 2725 return NULL; 2726 *len = config->identity_len; 2727 return config->identity; 2728 } 2729 2730 2731 static int eap_get_ext_password(struct eap_sm *sm, 2732 struct eap_peer_config *config) 2733 { 2734 char *name; 2735 2736 if (config->password == NULL) 2737 return -1; 2738 2739 name = os_zalloc(config->password_len + 1); 2740 if (name == NULL) 2741 return -1; 2742 os_memcpy(name, config->password, config->password_len); 2743 2744 ext_password_free(sm->ext_pw_buf); 2745 sm->ext_pw_buf = ext_password_get(sm->ext_pw, name); 2746 os_free(name); 2747 2748 return sm->ext_pw_buf == NULL ? -1 : 0; 2749 } 2750 2751 2752 /** 2753 * eap_get_config_password - Get password from the network configuration 2754 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2755 * @len: Buffer for the length of the password 2756 * Returns: Pointer to the password or %NULL if not found 2757 */ 2758 const u8 * eap_get_config_password(struct eap_sm *sm, size_t *len) 2759 { 2760 struct eap_peer_config *config = eap_get_config(sm); 2761 if (config == NULL) 2762 return NULL; 2763 2764 if (config->flags & EAP_CONFIG_FLAGS_EXT_PASSWORD) { 2765 if (eap_get_ext_password(sm, config) < 0) 2766 return NULL; 2767 *len = wpabuf_len(sm->ext_pw_buf); 2768 return wpabuf_head(sm->ext_pw_buf); 2769 } 2770 2771 *len = config->password_len; 2772 return config->password; 2773 } 2774 2775 2776 /** 2777 * eap_get_config_password2 - Get password from the network configuration 2778 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2779 * @len: Buffer for the length of the password 2780 * @hash: Buffer for returning whether the password is stored as a 2781 * NtPasswordHash instead of plaintext password; can be %NULL if this 2782 * information is not needed 2783 * Returns: Pointer to the password or %NULL if not found 2784 */ 2785 const u8 * eap_get_config_password2(struct eap_sm *sm, size_t *len, int *hash) 2786 { 2787 struct eap_peer_config *config = eap_get_config(sm); 2788 if (config == NULL) 2789 return NULL; 2790 2791 if (config->flags & EAP_CONFIG_FLAGS_EXT_PASSWORD) { 2792 if (eap_get_ext_password(sm, config) < 0) 2793 return NULL; 2794 if (hash) 2795 *hash = 0; 2796 *len = wpabuf_len(sm->ext_pw_buf); 2797 return wpabuf_head(sm->ext_pw_buf); 2798 } 2799 2800 *len = config->password_len; 2801 if (hash) 2802 *hash = !!(config->flags & EAP_CONFIG_FLAGS_PASSWORD_NTHASH); 2803 return config->password; 2804 } 2805 2806 2807 /** 2808 * eap_get_config_new_password - Get new password from network configuration 2809 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2810 * @len: Buffer for the length of the new password 2811 * Returns: Pointer to the new password or %NULL if not found 2812 */ 2813 const u8 * eap_get_config_new_password(struct eap_sm *sm, size_t *len) 2814 { 2815 struct eap_peer_config *config = eap_get_config(sm); 2816 if (config == NULL) 2817 return NULL; 2818 *len = config->new_password_len; 2819 return config->new_password; 2820 } 2821 2822 2823 /** 2824 * eap_get_config_otp - Get one-time password from the network configuration 2825 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2826 * @len: Buffer for the length of the one-time password 2827 * Returns: Pointer to the one-time password or %NULL if not found 2828 */ 2829 const u8 * eap_get_config_otp(struct eap_sm *sm, size_t *len) 2830 { 2831 struct eap_peer_config *config = eap_get_config(sm); 2832 if (config == NULL) 2833 return NULL; 2834 *len = config->otp_len; 2835 return config->otp; 2836 } 2837 2838 2839 /** 2840 * eap_clear_config_otp - Clear used one-time password 2841 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2842 * 2843 * This function clears a used one-time password (OTP) from the current network 2844 * configuration. This should be called when the OTP has been used and is not 2845 * needed anymore. 2846 */ 2847 void eap_clear_config_otp(struct eap_sm *sm) 2848 { 2849 struct eap_peer_config *config = eap_get_config(sm); 2850 if (config == NULL) 2851 return; 2852 os_memset(config->otp, 0, config->otp_len); 2853 os_free(config->otp); 2854 config->otp = NULL; 2855 config->otp_len = 0; 2856 } 2857 2858 2859 /** 2860 * eap_get_config_phase1 - Get phase1 data from the network configuration 2861 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2862 * Returns: Pointer to the phase1 data or %NULL if not found 2863 */ 2864 const char * eap_get_config_phase1(struct eap_sm *sm) 2865 { 2866 struct eap_peer_config *config = eap_get_config(sm); 2867 if (config == NULL) 2868 return NULL; 2869 return config->phase1; 2870 } 2871 2872 2873 /** 2874 * eap_get_config_phase2 - Get phase2 data from the network configuration 2875 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2876 * Returns: Pointer to the phase1 data or %NULL if not found 2877 */ 2878 const char * eap_get_config_phase2(struct eap_sm *sm) 2879 { 2880 struct eap_peer_config *config = eap_get_config(sm); 2881 if (config == NULL) 2882 return NULL; 2883 return config->phase2; 2884 } 2885 2886 2887 int eap_get_config_fragment_size(struct eap_sm *sm) 2888 { 2889 struct eap_peer_config *config = eap_get_config(sm); 2890 if (config == NULL) 2891 return -1; 2892 return config->fragment_size; 2893 } 2894 2895 2896 /** 2897 * eap_key_available - Get key availability (eapKeyAvailable variable) 2898 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2899 * Returns: 1 if EAP keying material is available, 0 if not 2900 */ 2901 int eap_key_available(struct eap_sm *sm) 2902 { 2903 return sm ? sm->eapKeyAvailable : 0; 2904 } 2905 2906 2907 /** 2908 * eap_notify_success - Notify EAP state machine about external success trigger 2909 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2910 * 2911 * This function is called when external event, e.g., successful completion of 2912 * WPA-PSK key handshake, is indicating that EAP state machine should move to 2913 * success state. This is mainly used with security modes that do not use EAP 2914 * state machine (e.g., WPA-PSK). 2915 */ 2916 void eap_notify_success(struct eap_sm *sm) 2917 { 2918 if (sm) { 2919 sm->decision = DECISION_COND_SUCC; 2920 sm->EAP_state = EAP_SUCCESS; 2921 } 2922 } 2923 2924 2925 /** 2926 * eap_notify_lower_layer_success - Notification of lower layer success 2927 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2928 * 2929 * Notify EAP state machines that a lower layer has detected a successful 2930 * authentication. This is used to recover from dropped EAP-Success messages. 2931 */ 2932 void eap_notify_lower_layer_success(struct eap_sm *sm) 2933 { 2934 if (sm == NULL) 2935 return; 2936 2937 if (eapol_get_bool(sm, EAPOL_eapSuccess) || 2938 sm->decision == DECISION_FAIL || 2939 (sm->methodState != METHOD_MAY_CONT && 2940 sm->methodState != METHOD_DONE)) 2941 return; 2942 2943 if (sm->eapKeyData != NULL) 2944 sm->eapKeyAvailable = TRUE; 2945 eapol_set_bool(sm, EAPOL_eapSuccess, TRUE); 2946 wpa_msg(sm->msg_ctx, MSG_INFO, WPA_EVENT_EAP_SUCCESS 2947 "EAP authentication completed successfully (based on lower " 2948 "layer success)"); 2949 } 2950 2951 2952 /** 2953 * eap_get_eapSessionId - Get Session-Id from EAP state machine 2954 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2955 * @len: Pointer to variable that will be set to number of bytes in the session 2956 * Returns: Pointer to the EAP Session-Id or %NULL on failure 2957 * 2958 * Fetch EAP Session-Id from the EAP state machine. The Session-Id is available 2959 * only after a successful authentication. EAP state machine continues to manage 2960 * the Session-Id and the caller must not change or free the returned data. 2961 */ 2962 const u8 * eap_get_eapSessionId(struct eap_sm *sm, size_t *len) 2963 { 2964 if (sm == NULL || sm->eapSessionId == NULL) { 2965 *len = 0; 2966 return NULL; 2967 } 2968 2969 *len = sm->eapSessionIdLen; 2970 return sm->eapSessionId; 2971 } 2972 2973 2974 /** 2975 * eap_get_eapKeyData - Get master session key (MSK) from EAP state machine 2976 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 2977 * @len: Pointer to variable that will be set to number of bytes in the key 2978 * Returns: Pointer to the EAP keying data or %NULL on failure 2979 * 2980 * Fetch EAP keying material (MSK, eapKeyData) from the EAP state machine. The 2981 * key is available only after a successful authentication. EAP state machine 2982 * continues to manage the key data and the caller must not change or free the 2983 * returned data. 2984 */ 2985 const u8 * eap_get_eapKeyData(struct eap_sm *sm, size_t *len) 2986 { 2987 if (sm == NULL || sm->eapKeyData == NULL) { 2988 *len = 0; 2989 return NULL; 2990 } 2991 2992 *len = sm->eapKeyDataLen; 2993 return sm->eapKeyData; 2994 } 2995 2996 2997 /** 2998 * eap_get_eapKeyData - Get EAP response data 2999 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 3000 * Returns: Pointer to the EAP response (eapRespData) or %NULL on failure 3001 * 3002 * Fetch EAP response (eapRespData) from the EAP state machine. This data is 3003 * available when EAP state machine has processed an incoming EAP request. The 3004 * EAP state machine does not maintain a reference to the response after this 3005 * function is called and the caller is responsible for freeing the data. 3006 */ 3007 struct wpabuf * eap_get_eapRespData(struct eap_sm *sm) 3008 { 3009 struct wpabuf *resp; 3010 3011 if (sm == NULL || sm->eapRespData == NULL) 3012 return NULL; 3013 3014 resp = sm->eapRespData; 3015 sm->eapRespData = NULL; 3016 3017 return resp; 3018 } 3019 3020 3021 /** 3022 * eap_sm_register_scard_ctx - Notification of smart card context 3023 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 3024 * @ctx: Context data for smart card operations 3025 * 3026 * Notify EAP state machines of context data for smart card operations. This 3027 * context data will be used as a parameter for scard_*() functions. 3028 */ 3029 void eap_register_scard_ctx(struct eap_sm *sm, void *ctx) 3030 { 3031 if (sm) 3032 sm->scard_ctx = ctx; 3033 } 3034 3035 3036 /** 3037 * eap_set_config_blob - Set or add a named configuration blob 3038 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 3039 * @blob: New value for the blob 3040 * 3041 * Adds a new configuration blob or replaces the current value of an existing 3042 * blob. 3043 */ 3044 void eap_set_config_blob(struct eap_sm *sm, struct wpa_config_blob *blob) 3045 { 3046 #ifndef CONFIG_NO_CONFIG_BLOBS 3047 sm->eapol_cb->set_config_blob(sm->eapol_ctx, blob); 3048 #endif /* CONFIG_NO_CONFIG_BLOBS */ 3049 } 3050 3051 3052 /** 3053 * eap_get_config_blob - Get a named configuration blob 3054 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 3055 * @name: Name of the blob 3056 * Returns: Pointer to blob data or %NULL if not found 3057 */ 3058 const struct wpa_config_blob * eap_get_config_blob(struct eap_sm *sm, 3059 const char *name) 3060 { 3061 #ifndef CONFIG_NO_CONFIG_BLOBS 3062 return sm->eapol_cb->get_config_blob(sm->eapol_ctx, name); 3063 #else /* CONFIG_NO_CONFIG_BLOBS */ 3064 return NULL; 3065 #endif /* CONFIG_NO_CONFIG_BLOBS */ 3066 } 3067 3068 3069 /** 3070 * eap_set_force_disabled - Set force_disabled flag 3071 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 3072 * @disabled: 1 = EAP disabled, 0 = EAP enabled 3073 * 3074 * This function is used to force EAP state machine to be disabled when it is 3075 * not in use (e.g., with WPA-PSK or plaintext connections). 3076 */ 3077 void eap_set_force_disabled(struct eap_sm *sm, int disabled) 3078 { 3079 sm->force_disabled = disabled; 3080 } 3081 3082 3083 /** 3084 * eap_set_external_sim - Set external_sim flag 3085 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 3086 * @external_sim: Whether external SIM/USIM processing is used 3087 */ 3088 void eap_set_external_sim(struct eap_sm *sm, int external_sim) 3089 { 3090 sm->external_sim = external_sim; 3091 } 3092 3093 3094 /** 3095 * eap_notify_pending - Notify that EAP method is ready to re-process a request 3096 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 3097 * 3098 * An EAP method can perform a pending operation (e.g., to get a response from 3099 * an external process). Once the response is available, this function can be 3100 * used to request EAPOL state machine to retry delivering the previously 3101 * received (and still unanswered) EAP request to EAP state machine. 3102 */ 3103 void eap_notify_pending(struct eap_sm *sm) 3104 { 3105 sm->eapol_cb->notify_pending(sm->eapol_ctx); 3106 } 3107 3108 3109 /** 3110 * eap_invalidate_cached_session - Mark cached session data invalid 3111 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 3112 */ 3113 void eap_invalidate_cached_session(struct eap_sm *sm) 3114 { 3115 if (sm) 3116 eap_deinit_prev_method(sm, "invalidate"); 3117 } 3118 3119 3120 int eap_is_wps_pbc_enrollee(struct eap_peer_config *conf) 3121 { 3122 if (conf->identity_len != WSC_ID_ENROLLEE_LEN || 3123 os_memcmp(conf->identity, WSC_ID_ENROLLEE, WSC_ID_ENROLLEE_LEN)) 3124 return 0; /* Not a WPS Enrollee */ 3125 3126 if (conf->phase1 == NULL || os_strstr(conf->phase1, "pbc=1") == NULL) 3127 return 0; /* Not using PBC */ 3128 3129 return 1; 3130 } 3131 3132 3133 int eap_is_wps_pin_enrollee(struct eap_peer_config *conf) 3134 { 3135 if (conf->identity_len != WSC_ID_ENROLLEE_LEN || 3136 os_memcmp(conf->identity, WSC_ID_ENROLLEE, WSC_ID_ENROLLEE_LEN)) 3137 return 0; /* Not a WPS Enrollee */ 3138 3139 if (conf->phase1 == NULL || os_strstr(conf->phase1, "pin=") == NULL) 3140 return 0; /* Not using PIN */ 3141 3142 return 1; 3143 } 3144 3145 3146 void eap_sm_set_ext_pw_ctx(struct eap_sm *sm, struct ext_password_data *ext) 3147 { 3148 ext_password_free(sm->ext_pw_buf); 3149 sm->ext_pw_buf = NULL; 3150 sm->ext_pw = ext; 3151 } 3152 3153 3154 /** 3155 * eap_set_anon_id - Set or add anonymous identity 3156 * @sm: Pointer to EAP state machine allocated with eap_peer_sm_init() 3157 * @id: Anonymous identity (e.g., EAP-SIM pseudonym) or %NULL to clear 3158 * @len: Length of anonymous identity in octets 3159 */ 3160 void eap_set_anon_id(struct eap_sm *sm, const u8 *id, size_t len) 3161 { 3162 if (sm->eapol_cb->set_anon_id) 3163 sm->eapol_cb->set_anon_id(sm->eapol_ctx, id, len); 3164 } 3165 3166 3167 int eap_peer_was_failure_expected(struct eap_sm *sm) 3168 { 3169 return sm->expected_failure; 3170 } 3171