1 #ifndef __LINUX_NL80211_H 2 #define __LINUX_NL80211_H 3 /* 4 * 802.11 netlink interface public header 5 * 6 * Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net> 7 * Copyright 2008 Michael Wu <flamingice@sourmilk.net> 8 * Copyright 2008 Luis Carlos Cobo <luisca@cozybit.com> 9 * Copyright 2008 Michael Buesch <m@bues.ch> 10 * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com> 11 * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com> 12 * Copyright 2008 Colin McCabe <colin@cozybit.com> 13 * Copyright 2015-2017 Intel Deutschland GmbH 14 * Copyright (C) 2018-2023 Intel Corporation 15 * 16 * Permission to use, copy, modify, and/or distribute this software for any 17 * purpose with or without fee is hereby granted, provided that the above 18 * copyright notice and this permission notice appear in all copies. 19 * 20 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 21 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 22 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 23 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 24 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 25 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 26 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 27 * 28 */ 29 30 /* 31 * This header file defines the userspace API to the wireless stack. Please 32 * be careful not to break things - i.e. don't move anything around or so 33 * unless you can demonstrate that it breaks neither API nor ABI. 34 * 35 * Additions to the API should be accompanied by actual implementations in 36 * an upstream driver, so that example implementations exist in case there 37 * are ever concerns about the precise semantics of the API or changes are 38 * needed, and to ensure that code for dead (no longer implemented) API 39 * can actually be identified and removed. 40 * Nonetheless, semantics should also be documented carefully in this file. 41 */ 42 43 #include <linux/types.h> 44 45 #define NL80211_GENL_NAME "nl80211" 46 47 #define NL80211_MULTICAST_GROUP_CONFIG "config" 48 #define NL80211_MULTICAST_GROUP_SCAN "scan" 49 #define NL80211_MULTICAST_GROUP_REG "regulatory" 50 #define NL80211_MULTICAST_GROUP_MLME "mlme" 51 #define NL80211_MULTICAST_GROUP_VENDOR "vendor" 52 #define NL80211_MULTICAST_GROUP_NAN "nan" 53 #define NL80211_MULTICAST_GROUP_TESTMODE "testmode" 54 55 #define NL80211_EDMG_BW_CONFIG_MIN 4 56 #define NL80211_EDMG_BW_CONFIG_MAX 15 57 #define NL80211_EDMG_CHANNELS_MIN 1 58 #define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */ 59 60 /** 61 * DOC: Station handling 62 * 63 * Stations are added per interface, but a special case exists with VLAN 64 * interfaces. When a station is bound to an AP interface, it may be moved 65 * into a VLAN identified by a VLAN interface index (%NL80211_ATTR_STA_VLAN). 66 * The station is still assumed to belong to the AP interface it was added 67 * to. 68 * 69 * Station handling varies per interface type and depending on the driver's 70 * capabilities. 71 * 72 * For drivers supporting TDLS with external setup (WIPHY_FLAG_SUPPORTS_TDLS 73 * and WIPHY_FLAG_TDLS_EXTERNAL_SETUP), the station lifetime is as follows: 74 * - a setup station entry is added, not yet authorized, without any rate 75 * or capability information, this just exists to avoid race conditions 76 * - when the TDLS setup is done, a single NL80211_CMD_SET_STATION is valid 77 * to add rate and capability information to the station and at the same 78 * time mark it authorized. 79 * - %NL80211_TDLS_ENABLE_LINK is then used 80 * - after this, the only valid operation is to remove it by tearing down 81 * the TDLS link (%NL80211_TDLS_DISABLE_LINK) 82 * 83 * TODO: need more info for other interface types 84 */ 85 86 /** 87 * DOC: Frame transmission/registration support 88 * 89 * Frame transmission and registration support exists to allow userspace 90 * management entities such as wpa_supplicant react to management frames 91 * that are not being handled by the kernel. This includes, for example, 92 * certain classes of action frames that cannot be handled in the kernel 93 * for various reasons. 94 * 95 * Frame registration is done on a per-interface basis and registrations 96 * cannot be removed other than by closing the socket. It is possible to 97 * specify a registration filter to register, for example, only for a 98 * certain type of action frame. In particular with action frames, those 99 * that userspace registers for will not be returned as unhandled by the 100 * driver, so that the registered application has to take responsibility 101 * for doing that. 102 * 103 * The type of frame that can be registered for is also dependent on the 104 * driver and interface type. The frame types are advertised in wiphy 105 * attributes so applications know what to expect. 106 * 107 * NOTE: When an interface changes type while registrations are active, 108 * these registrations are ignored until the interface type is 109 * changed again. This means that changing the interface type can 110 * lead to a situation that couldn't otherwise be produced, but 111 * any such registrations will be dormant in the sense that they 112 * will not be serviced, i.e. they will not receive any frames. 113 * 114 * Frame transmission allows userspace to send for example the required 115 * responses to action frames. It is subject to some sanity checking, 116 * but many frames can be transmitted. When a frame was transmitted, its 117 * status is indicated to the sending socket. 118 * 119 * For more technical details, see the corresponding command descriptions 120 * below. 121 */ 122 123 /** 124 * DOC: Virtual interface / concurrency capabilities 125 * 126 * Some devices are able to operate with virtual MACs, they can have 127 * more than one virtual interface. The capability handling for this 128 * is a bit complex though, as there may be a number of restrictions 129 * on the types of concurrency that are supported. 130 * 131 * To start with, each device supports the interface types listed in 132 * the %NL80211_ATTR_SUPPORTED_IFTYPES attribute, but by listing the 133 * types there no concurrency is implied. 134 * 135 * Once concurrency is desired, more attributes must be observed: 136 * To start with, since some interface types are purely managed in 137 * software, like the AP-VLAN type in mac80211 for example, there's 138 * an additional list of these, they can be added at any time and 139 * are only restricted by some semantic restrictions (e.g. AP-VLAN 140 * cannot be added without a corresponding AP interface). This list 141 * is exported in the %NL80211_ATTR_SOFTWARE_IFTYPES attribute. 142 * 143 * Further, the list of supported combinations is exported. This is 144 * in the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute. Basically, 145 * it exports a list of "groups", and at any point in time the 146 * interfaces that are currently active must fall into any one of 147 * the advertised groups. Within each group, there are restrictions 148 * on the number of interfaces of different types that are supported 149 * and also the number of different channels, along with potentially 150 * some other restrictions. See &enum nl80211_if_combination_attrs. 151 * 152 * All together, these attributes define the concurrency of virtual 153 * interfaces that a given device supports. 154 */ 155 156 /** 157 * DOC: packet coalesce support 158 * 159 * In most cases, host that receives IPv4 and IPv6 multicast/broadcast 160 * packets does not do anything with these packets. Therefore the 161 * reception of these unwanted packets causes unnecessary processing 162 * and power consumption. 163 * 164 * Packet coalesce feature helps to reduce number of received interrupts 165 * to host by buffering these packets in firmware/hardware for some 166 * predefined time. Received interrupt will be generated when one of the 167 * following events occur. 168 * a) Expiration of hardware timer whose expiration time is set to maximum 169 * coalescing delay of matching coalesce rule. 170 * b) Coalescing buffer in hardware reaches its limit. 171 * c) Packet doesn't match any of the configured coalesce rules. 172 * 173 * User needs to configure following parameters for creating a coalesce 174 * rule. 175 * a) Maximum coalescing delay 176 * b) List of packet patterns which needs to be matched 177 * c) Condition for coalescence. pattern 'match' or 'no match' 178 * Multiple such rules can be created. 179 */ 180 181 /** 182 * DOC: WPA/WPA2 EAPOL handshake offload 183 * 184 * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers 185 * can indicate they support offloading EAPOL handshakes for WPA/WPA2 186 * preshared key authentication in station mode. In %NL80211_CMD_CONNECT 187 * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers 188 * supporting this offload may reject the %NL80211_CMD_CONNECT when no 189 * preshared key material is provided, for example when that driver does 190 * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. 191 * 192 * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be 193 * set by drivers indicating offload support of the PTK/GTK EAPOL 194 * handshakes during 802.1X authentication in station mode. In order to 195 * use the offload the %NL80211_CMD_CONNECT should have 196 * %NL80211_ATTR_WANT_1X_4WAY_HS attribute flag. Drivers supporting this 197 * offload may reject the %NL80211_CMD_CONNECT when the attribute flag is 198 * not present. 199 * 200 * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK flag drivers 201 * can indicate they support offloading EAPOL handshakes for WPA/WPA2 202 * preshared key authentication in AP mode. In %NL80211_CMD_START_AP 203 * the preshared key should be specified using %NL80211_ATTR_PMK. Drivers 204 * supporting this offload may reject the %NL80211_CMD_START_AP when no 205 * preshared key material is provided, for example when that driver does 206 * not support setting the temporal keys through %NL80211_CMD_NEW_KEY. 207 * 208 * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK 209 * using %NL80211_CMD_SET_PMK. For offloaded FT support also 210 * %NL80211_ATTR_PMKR0_NAME must be provided. 211 */ 212 213 /** 214 * DOC: FILS shared key authentication offload 215 * 216 * FILS shared key authentication offload can be advertized by drivers by 217 * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support 218 * FILS shared key authentication offload should be able to construct the 219 * authentication and association frames for FILS shared key authentication and 220 * eventually do a key derivation as per IEEE 802.11ai. The below additional 221 * parameters should be given to driver in %NL80211_CMD_CONNECT and/or in 222 * %NL80211_CMD_UPDATE_CONNECT_PARAMS. 223 * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai 224 * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai 225 * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message 226 * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK 227 * rIK should be used to generate an authentication tag on the ERP message and 228 * rMSK should be used to derive a PMKSA. 229 * rIK, rMSK should be generated and keyname_nai, sequence number should be used 230 * as specified in IETF RFC 6696. 231 * 232 * When FILS shared key authentication is completed, driver needs to provide the 233 * below additional parameters to userspace, which can be either after setting 234 * up a connection or after roaming. 235 * %NL80211_ATTR_FILS_KEK - used for key renewal 236 * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges 237 * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated 238 * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace 239 * The PMKSA can be maintained in userspace persistently so that it can be used 240 * later after reboots or wifi turn off/on also. 241 * 242 * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS 243 * capable AP supporting PMK caching. It specifies the scope within which the 244 * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and 245 * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based 246 * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with 247 * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to 248 * use in a FILS shared key connection with PMKSA caching. 249 */ 250 251 /** 252 * DOC: SAE authentication offload 253 * 254 * By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they 255 * support offloading SAE authentication for WPA3-Personal networks in station 256 * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by 257 * drivers indicating the offload support in AP mode. 258 * 259 * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in 260 * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode 261 * respectively. 262 */ 263 264 /** 265 * DOC: VLAN offload support for setting group keys and binding STAs to VLANs 266 * 267 * By setting @NL80211_EXT_FEATURE_VLAN_OFFLOAD flag drivers can indicate they 268 * support offloading VLAN functionality in a manner where the driver exposes a 269 * single netdev that uses VLAN tagged frames and separate VLAN-specific netdevs 270 * can then be added using RTM_NEWLINK/IFLA_VLAN_ID similarly to the Ethernet 271 * case. Frames received from stations that are not assigned to any VLAN are 272 * delivered on the main netdev and frames to such stations can be sent through 273 * that main netdev. 274 * 275 * %NL80211_CMD_NEW_KEY (for group keys), %NL80211_CMD_NEW_STATION, and 276 * %NL80211_CMD_SET_STATION will optionally specify vlan_id using 277 * %NL80211_ATTR_VLAN_ID. 278 */ 279 280 /** 281 * DOC: TID configuration 282 * 283 * TID config support can be checked in the %NL80211_ATTR_TID_CONFIG 284 * attribute given in wiphy capabilities. 285 * 286 * The necessary configuration parameters are mentioned in 287 * &enum nl80211_tid_config_attr and it will be passed to the 288 * %NL80211_CMD_SET_TID_CONFIG command in %NL80211_ATTR_TID_CONFIG. 289 * 290 * If the configuration needs to be applied for specific peer then the MAC 291 * address of the peer needs to be passed in %NL80211_ATTR_MAC, otherwise the 292 * configuration will be applied for all the connected peers in the vif except 293 * any peers that have peer specific configuration for the TID by default; if 294 * the %NL80211_TID_CONFIG_ATTR_OVERRIDE flag is set, peer specific values 295 * will be overwritten. 296 * 297 * All this configuration is valid only for STA's current connection 298 * i.e. the configuration will be reset to default when the STA connects back 299 * after disconnection/roaming, and this configuration will be cleared when 300 * the interface goes down. 301 */ 302 303 /** 304 * DOC: FILS shared key crypto offload 305 * 306 * This feature is applicable to drivers running in AP mode. 307 * 308 * FILS shared key crypto offload can be advertised by drivers by setting 309 * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support 310 * FILS shared key crypto offload should be able to encrypt and decrypt 311 * association frames for FILS shared key authentication as per IEEE 802.11ai. 312 * With this capability, for FILS key derivation, drivers depend on userspace. 313 * 314 * After FILS key derivation, userspace shares the FILS AAD details with the 315 * driver and the driver stores the same to use in decryption of association 316 * request and in encryption of association response. The below parameters 317 * should be given to the driver in %NL80211_CMD_SET_FILS_AAD. 318 * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA 319 * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption 320 * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption 321 * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) 322 * 323 * Once the association is done, the driver cleans the FILS AAD data. 324 */ 325 326 /** 327 * DOC: Multi-Link Operation 328 * 329 * In Multi-Link Operation, a connection between two MLDs utilizes multiple 330 * links. To use this in nl80211, various commands and responses now need 331 * to or will include the new %NL80211_ATTR_MLO_LINKS attribute. 332 * Additionally, various commands that need to operate on a specific link 333 * now need to be given the %NL80211_ATTR_MLO_LINK_ID attribute, e.g. to 334 * use %NL80211_CMD_START_AP or similar functions. 335 */ 336 337 /** 338 * DOC: OWE DH IE handling offload 339 * 340 * By setting @NL80211_EXT_FEATURE_OWE_OFFLOAD flag, drivers can indicate 341 * kernel/application space to avoid DH IE handling. When this flag is 342 * advertised, the driver/device will take care of DH IE inclusion and 343 * processing of peer DH IE to generate PMK. 344 */ 345 346 /** 347 * enum nl80211_commands - supported nl80211 commands 348 * 349 * @NL80211_CMD_UNSPEC: unspecified command to catch errors 350 * 351 * @NL80211_CMD_GET_WIPHY: request information about a wiphy or dump request 352 * to get a list of all present wiphys. 353 * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or 354 * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, 355 * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, 356 * %NL80211_ATTR_WIPHY_FREQ_OFFSET (and the attributes determining the 357 * channel width; this is used for setting monitor mode channel), 358 * %NL80211_ATTR_WIPHY_RETRY_SHORT, %NL80211_ATTR_WIPHY_RETRY_LONG, 359 * %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, and/or 360 * %NL80211_ATTR_WIPHY_RTS_THRESHOLD. However, for setting the channel, 361 * see %NL80211_CMD_SET_CHANNEL instead, the support here is for backward 362 * compatibility only. 363 * @NL80211_CMD_NEW_WIPHY: Newly created wiphy, response to get request 364 * or rename notification. Has attributes %NL80211_ATTR_WIPHY and 365 * %NL80211_ATTR_WIPHY_NAME. 366 * @NL80211_CMD_DEL_WIPHY: Wiphy deleted. Has attributes 367 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. 368 * 369 * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; 370 * either a dump request for all interfaces or a specific get with a 371 * single %NL80211_ATTR_IFINDEX is supported. 372 * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires 373 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. 374 * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response 375 * to %NL80211_CMD_GET_INTERFACE. Has %NL80211_ATTR_IFINDEX, 376 * %NL80211_ATTR_WIPHY and %NL80211_ATTR_IFTYPE attributes. Can also 377 * be sent from userspace to request creation of a new virtual interface, 378 * then requires attributes %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFTYPE and 379 * %NL80211_ATTR_IFNAME. 380 * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes 381 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from 382 * userspace to request deletion of a virtual interface, then requires 383 * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are 384 * enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS, 385 * and if this command is used for the transmitting interface, then all 386 * the non-transmitting interfaces are deleted as well. 387 * 388 * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified 389 * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC 390 * represents peer's MLD address for MLO pairwise key. For MLO group key, 391 * the link is identified by %NL80211_ATTR_MLO_LINK_ID. 392 * @NL80211_CMD_SET_KEY: Set key attributes %NL80211_ATTR_KEY_DEFAULT, 393 * %NL80211_ATTR_KEY_DEFAULT_MGMT, or %NL80211_ATTR_KEY_THRESHOLD. 394 * For MLO connection, the link to set default key is identified by 395 * %NL80211_ATTR_MLO_LINK_ID. 396 * @NL80211_CMD_NEW_KEY: add a key with given %NL80211_ATTR_KEY_DATA, 397 * %NL80211_ATTR_KEY_IDX, %NL80211_ATTR_MAC, %NL80211_ATTR_KEY_CIPHER, 398 * and %NL80211_ATTR_KEY_SEQ attributes. %NL80211_ATTR_MAC represents 399 * peer's MLD address for MLO pairwise key. The link to add MLO 400 * group key is identified by %NL80211_ATTR_MLO_LINK_ID. 401 * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_IDX 402 * or %NL80211_ATTR_MAC. %NL80211_ATTR_MAC represents peer's MLD address 403 * for MLO pairwise key. The link to delete group key is identified by 404 * %NL80211_ATTR_MLO_LINK_ID. 405 * 406 * @NL80211_CMD_GET_BEACON: (not used) 407 * @NL80211_CMD_SET_BEACON: change the beacon on an access point interface 408 * using the %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL 409 * attributes. For drivers that generate the beacon and probe responses 410 * internally, the following attributes must be provided: %NL80211_ATTR_IE, 411 * %NL80211_ATTR_IE_PROBE_RESP and %NL80211_ATTR_IE_ASSOC_RESP. 412 * @NL80211_CMD_START_AP: Start AP operation on an AP interface, parameters 413 * are like for %NL80211_CMD_SET_BEACON, and additionally parameters that 414 * do not change are used, these include %NL80211_ATTR_BEACON_INTERVAL, 415 * %NL80211_ATTR_DTIM_PERIOD, %NL80211_ATTR_SSID, 416 * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, 417 * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, 418 * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, 419 * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_INACTIVITY_TIMEOUT, 420 * %NL80211_ATTR_ACL_POLICY and %NL80211_ATTR_MAC_ADDRS. 421 * The channel to use can be set on the interface or be given using the 422 * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_FREQ_OFFSET, and the 423 * attributes determining channel width. 424 * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP 425 * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface 426 * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP 427 * 428 * @NL80211_CMD_GET_STATION: Get station attributes for station identified by 429 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. 430 * @NL80211_CMD_SET_STATION: Set station attributes for station identified by 431 * %NL80211_ATTR_MAC on the interface identified by %NL80211_ATTR_IFINDEX. 432 * @NL80211_CMD_NEW_STATION: Add a station with given attributes to the 433 * interface identified by %NL80211_ATTR_IFINDEX. 434 * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC 435 * or, if no MAC address given, all stations, on the interface identified 436 * by %NL80211_ATTR_IFINDEX. For MLD station, MLD address is used in 437 * %NL80211_ATTR_MAC. %NL80211_ATTR_MGMT_SUBTYPE and 438 * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type 439 * of disconnection indication should be sent to the station 440 * (Deauthentication or Disassociation frame and reason code for that 441 * frame). 442 * 443 * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to 444 * destination %NL80211_ATTR_MAC on the interface identified by 445 * %NL80211_ATTR_IFINDEX. 446 * @NL80211_CMD_SET_MPATH: Set mesh path attributes for mesh path to 447 * destination %NL80211_ATTR_MAC on the interface identified by 448 * %NL80211_ATTR_IFINDEX. 449 * @NL80211_CMD_NEW_MPATH: Create a new mesh path for the destination given by 450 * %NL80211_ATTR_MAC via %NL80211_ATTR_MPATH_NEXT_HOP. 451 * @NL80211_CMD_DEL_MPATH: Delete a mesh path to the destination given by 452 * %NL80211_ATTR_MAC. 453 * @NL80211_CMD_NEW_PATH: Add a mesh path with given attributes to the 454 * interface identified by %NL80211_ATTR_IFINDEX. 455 * @NL80211_CMD_DEL_PATH: Remove a mesh path identified by %NL80211_ATTR_MAC 456 * or, if no MAC address given, all mesh paths, on the interface identified 457 * by %NL80211_ATTR_IFINDEX. 458 * @NL80211_CMD_SET_BSS: Set BSS attributes for BSS identified by 459 * %NL80211_ATTR_IFINDEX. 460 * 461 * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set 462 * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device 463 * has a private regulatory domain, it will be returned. Otherwise, the 464 * global regdomain will be returned. 465 * A device will have a private regulatory domain if it uses the 466 * regulatory_hint() API. Even when a private regdomain is used the channel 467 * information will still be mended according to further hints from 468 * the regulatory core to help with compliance. A dump version of this API 469 * is now available which will returns the global regdomain as well as 470 * all private regdomains of present wiphys (for those that have it). 471 * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then 472 * its private regdomain is the only valid one for it. The regulatory 473 * core is not used to help with compliance in this case. 474 * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command 475 * after being queried by the kernel. CRDA replies by sending a regulatory 476 * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our 477 * current alpha2 if it found a match. It also provides 478 * NL80211_ATTR_REG_RULE_FLAGS, and a set of regulatory rules. Each 479 * regulatory rule is a nested set of attributes given by 480 * %NL80211_ATTR_REG_RULE_FREQ_[START|END] and 481 * %NL80211_ATTR_FREQ_RANGE_MAX_BW with an attached power rule given by 482 * %NL80211_ATTR_REG_RULE_POWER_MAX_ANT_GAIN and 483 * %NL80211_ATTR_REG_RULE_POWER_MAX_EIRP. 484 * @NL80211_CMD_REQ_SET_REG: ask the wireless core to set the regulatory domain 485 * to the specified ISO/IEC 3166-1 alpha2 country code. The core will 486 * store this as a valid request and then query userspace for it. 487 * 488 * @NL80211_CMD_GET_MESH_CONFIG: Get mesh networking properties for the 489 * interface identified by %NL80211_ATTR_IFINDEX 490 * 491 * @NL80211_CMD_SET_MESH_CONFIG: Set mesh networking properties for the 492 * interface identified by %NL80211_ATTR_IFINDEX 493 * 494 * @NL80211_CMD_SET_MGMT_EXTRA_IE: Set extra IEs for management frames. The 495 * interface is identified with %NL80211_ATTR_IFINDEX and the management 496 * frame subtype with %NL80211_ATTR_MGMT_SUBTYPE. The extra IE data to be 497 * added to the end of the specified management frame is specified with 498 * %NL80211_ATTR_IE. If the command succeeds, the requested data will be 499 * added to all specified management frames generated by 500 * kernel/firmware/driver. 501 * Note: This command has been removed and it is only reserved at this 502 * point to avoid re-using existing command number. The functionality this 503 * command was planned for has been provided with cleaner design with the 504 * option to specify additional IEs in NL80211_CMD_TRIGGER_SCAN, 505 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_ASSOCIATE, 506 * NL80211_CMD_DEAUTHENTICATE, and NL80211_CMD_DISASSOCIATE. 507 * 508 * @NL80211_CMD_GET_SCAN: get scan results 509 * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters 510 * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the 511 * probe requests at CCK rate or not. %NL80211_ATTR_BSSID can be used to 512 * specify a BSSID to scan for; if not included, the wildcard BSSID will 513 * be used. 514 * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to 515 * NL80211_CMD_GET_SCAN and on the "scan" multicast group) 516 * @NL80211_CMD_SCAN_ABORTED: scan was aborted, for unspecified reasons, 517 * partial scan results may be available 518 * 519 * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain 520 * intervals and certain number of cycles, as specified by 521 * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is 522 * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified, 523 * scheduled scan will run in an infinite loop with the specified interval. 524 * These attributes are mutually exculsive, 525 * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if 526 * NL80211_ATTR_SCHED_SCAN_PLANS is defined. 527 * If for some reason scheduled scan is aborted by the driver, all scan 528 * plans are canceled (including scan plans that did not start yet). 529 * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS) 530 * are passed, they are used in the probe requests. For 531 * broadcast, a broadcast SSID must be passed (ie. an empty 532 * string). If no SSID is passed, no probe requests are sent and 533 * a passive scan is performed. %NL80211_ATTR_SCAN_FREQUENCIES, 534 * if passed, define which channels should be scanned; if not 535 * passed, all channels allowed for the current regulatory domain 536 * are used. Extra IEs can also be passed from the userspace by 537 * using the %NL80211_ATTR_IE attribute. The first cycle of the 538 * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY 539 * is supplied. If the device supports multiple concurrent scheduled 540 * scans, it will allow such when the caller provides the flag attribute 541 * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it. 542 * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if 543 * scheduled scan is not running. The caller may assume that as soon 544 * as the call returns, it is safe to start a new scheduled scan again. 545 * @NL80211_CMD_SCHED_SCAN_RESULTS: indicates that there are scheduled scan 546 * results available. 547 * @NL80211_CMD_SCHED_SCAN_STOPPED: indicates that the scheduled scan has 548 * stopped. The driver may issue this event at any time during a 549 * scheduled scan. One reason for stopping the scan is if the hardware 550 * does not support starting an association or a normal scan while running 551 * a scheduled scan. This event is also sent when the 552 * %NL80211_CMD_STOP_SCHED_SCAN command is received or when the interface 553 * is brought down while a scheduled scan was running. 554 * 555 * @NL80211_CMD_GET_SURVEY: get survey resuls, e.g. channel occupation 556 * or noise level 557 * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to 558 * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) 559 * 560 * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC 561 * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK 562 * (PMK is used for PTKSA derivation in case of FILS shared key offload) or 563 * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, 564 * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS 565 * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier 566 * advertized by a FILS capable AP identifying the scope of PMKSA in an 567 * ESS. 568 * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC 569 * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, 570 * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS 571 * authentication. 572 * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. 573 * 574 * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain 575 * has been changed and provides details of the request information 576 * that caused the change such as who initiated the regulatory request 577 * (%NL80211_ATTR_REG_INITIATOR), the wiphy_idx 578 * (%NL80211_ATTR_REG_ALPHA2) on which the request was made from if 579 * the initiator was %NL80211_REGDOM_SET_BY_COUNTRY_IE or 580 * %NL80211_REGDOM_SET_BY_DRIVER, the type of regulatory domain 581 * set (%NL80211_ATTR_REG_TYPE), if the type of regulatory domain is 582 * %NL80211_REG_TYPE_COUNTRY the alpha2 to which we have moved on 583 * to (%NL80211_ATTR_REG_ALPHA2). 584 * @NL80211_CMD_REG_BEACON_HINT: indicates to userspace that an AP beacon 585 * has been found while world roaming thus enabling active scan or 586 * any mode of operation that initiates TX (beacons) on a channel 587 * where we would not have been able to do either before. As an example 588 * if you are world roaming (regulatory domain set to world or if your 589 * driver is using a custom world roaming regulatory domain) and while 590 * doing a passive scan on the 5 GHz band you find an AP there (if not 591 * on a DFS channel) you will now be able to actively scan for that AP 592 * or use AP mode on your card on that same channel. Note that this will 593 * never be used for channels 1-11 on the 2 GHz band as they are always 594 * enabled world wide. This beacon hint is only sent if your device had 595 * either disabled active scanning or beaconing on a channel. We send to 596 * userspace the wiphy on which we removed a restriction from 597 * (%NL80211_ATTR_WIPHY) and the channel on which this occurred 598 * before (%NL80211_ATTR_FREQ_BEFORE) and after (%NL80211_ATTR_FREQ_AFTER) 599 * the beacon hint was processed. 600 * 601 * @NL80211_CMD_AUTHENTICATE: authentication request and notification. 602 * This command is used both as a command (request to authenticate) and 603 * as an event on the "mlme" multicast group indicating completion of the 604 * authentication process. 605 * When used as a command, %NL80211_ATTR_IFINDEX is used to identify the 606 * interface. %NL80211_ATTR_MAC is used to specify PeerSTAAddress (and 607 * BSSID in case of station mode). %NL80211_ATTR_SSID is used to specify 608 * the SSID (mainly for association, but is included in authentication 609 * request, too, to help BSS selection. %NL80211_ATTR_WIPHY_FREQ + 610 * %NL80211_ATTR_WIPHY_FREQ_OFFSET is used to specify the frequence of the 611 * channel in MHz. %NL80211_ATTR_AUTH_TYPE is used to specify the 612 * authentication type. %NL80211_ATTR_IE is used to define IEs 613 * (VendorSpecificInfo, but also including RSN IE and FT IEs) to be added 614 * to the frame. 615 * When used as an event, this reports reception of an Authentication 616 * frame in station and IBSS modes when the local MLME processed the 617 * frame, i.e., it was for the local STA and was received in correct 618 * state. This is similar to MLME-AUTHENTICATE.confirm primitive in the 619 * MLME SAP interface (kernel providing MLME, userspace SME). The 620 * included %NL80211_ATTR_FRAME attribute contains the management frame 621 * (including both the header and frame body, but not FCS). This event is 622 * also used to indicate if the authentication attempt timed out. In that 623 * case the %NL80211_ATTR_FRAME attribute is replaced with a 624 * %NL80211_ATTR_TIMED_OUT flag (and %NL80211_ATTR_MAC to indicate which 625 * pending authentication timed out). 626 * @NL80211_CMD_ASSOCIATE: association request and notification; like 627 * NL80211_CMD_AUTHENTICATE but for Association and Reassociation 628 * (similar to MLME-ASSOCIATE.request, MLME-REASSOCIATE.request, 629 * MLME-ASSOCIATE.confirm or MLME-REASSOCIATE.confirm primitives). The 630 * %NL80211_ATTR_PREV_BSSID attribute is used to specify whether the 631 * request is for the initial association to an ESS (that attribute not 632 * included) or for reassociation within the ESS (that attribute is 633 * included). 634 * @NL80211_CMD_DEAUTHENTICATE: deauthentication request and notification; like 635 * NL80211_CMD_AUTHENTICATE but for Deauthentication frames (similar to 636 * MLME-DEAUTHENTICATION.request and MLME-DEAUTHENTICATE.indication 637 * primitives). 638 * @NL80211_CMD_DISASSOCIATE: disassociation request and notification; like 639 * NL80211_CMD_AUTHENTICATE but for Disassociation frames (similar to 640 * MLME-DISASSOCIATE.request and MLME-DISASSOCIATE.indication primitives). 641 * 642 * @NL80211_CMD_MICHAEL_MIC_FAILURE: notification of a locally detected Michael 643 * MIC (part of TKIP) failure; sent on the "mlme" multicast group; the 644 * event includes %NL80211_ATTR_MAC to describe the source MAC address of 645 * the frame with invalid MIC, %NL80211_ATTR_KEY_TYPE to show the key 646 * type, %NL80211_ATTR_KEY_IDX to indicate the key identifier, and 647 * %NL80211_ATTR_KEY_SEQ to indicate the TSC value of the frame; this 648 * event matches with MLME-MICHAELMICFAILURE.indication() primitive 649 * 650 * @NL80211_CMD_JOIN_IBSS: Join a new IBSS -- given at least an SSID and a 651 * FREQ attribute (for the initial frequency if no peer can be found) 652 * and optionally a MAC (as BSSID) and FREQ_FIXED attribute if those 653 * should be fixed rather than automatically determined. Can only be 654 * executed on a network interface that is UP, and fixed BSSID/FREQ 655 * may be rejected. Another optional parameter is the beacon interval, 656 * given in the %NL80211_ATTR_BEACON_INTERVAL attribute, which if not 657 * given defaults to 100 TU (102.4ms). 658 * @NL80211_CMD_LEAVE_IBSS: Leave the IBSS -- no special arguments, the IBSS is 659 * determined by the network interface. 660 * 661 * @NL80211_CMD_TESTMODE: testmode command, takes a wiphy (or ifindex) attribute 662 * to identify the device, and the TESTDATA blob attribute to pass through 663 * to the driver. 664 * 665 * @NL80211_CMD_CONNECT: connection request and notification; this command 666 * requests to connect to a specified network but without separating 667 * auth and assoc steps. For this, you need to specify the SSID in a 668 * %NL80211_ATTR_SSID attribute, and can optionally specify the association 669 * IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, 670 * %NL80211_ATTR_USE_MFP, %NL80211_ATTR_MAC, %NL80211_ATTR_WIPHY_FREQ, 671 * %NL80211_ATTR_WIPHY_FREQ_OFFSET, %NL80211_ATTR_CONTROL_PORT, 672 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 673 * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, 674 * %NL80211_ATTR_CONTROL_PORT_OVER_NL80211, %NL80211_ATTR_MAC_HINT, and 675 * %NL80211_ATTR_WIPHY_FREQ_HINT. 676 * If included, %NL80211_ATTR_MAC and %NL80211_ATTR_WIPHY_FREQ are 677 * restrictions on BSS selection, i.e., they effectively prevent roaming 678 * within the ESS. %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT 679 * can be included to provide a recommendation of the initial BSS while 680 * allowing the driver to roam to other BSSes within the ESS and also to 681 * ignore this recommendation if the indicated BSS is not ideal. Only one 682 * set of BSSID,frequency parameters is used (i.e., either the enforcing 683 * %NL80211_ATTR_MAC,%NL80211_ATTR_WIPHY_FREQ or the less strict 684 * %NL80211_ATTR_MAC_HINT and %NL80211_ATTR_WIPHY_FREQ_HINT). 685 * Driver shall not modify the IEs specified through %NL80211_ATTR_IE if 686 * %NL80211_ATTR_MAC is included. However, if %NL80211_ATTR_MAC_HINT is 687 * included, these IEs through %NL80211_ATTR_IE are specified by the user 688 * space based on the best possible BSS selected. Thus, if the driver ends 689 * up selecting a different BSS, it can modify these IEs accordingly (e.g. 690 * userspace asks the driver to perform PMKSA caching with BSS1 and the 691 * driver ends up selecting BSS2 with different PMKSA cache entry; RSNIE 692 * has to get updated with the apt PMKID). 693 * %NL80211_ATTR_PREV_BSSID can be used to request a reassociation within 694 * the ESS in case the device is already associated and an association with 695 * a different BSS is desired. 696 * Background scan period can optionally be 697 * specified in %NL80211_ATTR_BG_SCAN_PERIOD, 698 * if not specified default background scan configuration 699 * in driver is used and if period value is 0, bg scan will be disabled. 700 * This attribute is ignored if driver does not support roam scan. 701 * It is also sent as an event, with the BSSID and response IEs when the 702 * connection is established or failed to be established. This can be 703 * determined by the %NL80211_ATTR_STATUS_CODE attribute (0 = success, 704 * non-zero = failure). If %NL80211_ATTR_TIMED_OUT is included in the 705 * event, the connection attempt failed due to not being able to initiate 706 * authentication/association or not receiving a response from the AP. 707 * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as 708 * well to remain backwards compatible. 709 * @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself. 710 * When a security association was established on an 802.1X network using 711 * fast transition, this event should be followed by an 712 * %NL80211_CMD_PORT_AUTHORIZED event. 713 * Following a %NL80211_CMD_ROAM event userspace can issue 714 * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the 715 * new BSS the card/driver roamed to. 716 * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify 717 * userspace that a connection was dropped by the AP or due to other 718 * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and 719 * %NL80211_ATTR_REASON_CODE attributes are used. 720 * 721 * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices 722 * associated with this wiphy must be down and will follow. 723 * 724 * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified 725 * channel for the specified amount of time. This can be used to do 726 * off-channel operations like transmit a Public Action frame and wait for 727 * a response while being associated to an AP on another channel. 728 * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus 729 * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the 730 * frequency for the operation. 731 * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds 732 * to remain on the channel. This command is also used as an event to 733 * notify when the requested duration starts (it may take a while for the 734 * driver to schedule this time due to other concurrent needs for the 735 * radio). 736 * When called, this operation returns a cookie (%NL80211_ATTR_COOKIE) 737 * that will be included with any events pertaining to this request; 738 * the cookie is also used to cancel the request. 739 * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a 740 * pending remain-on-channel duration if the desired operation has been 741 * completed prior to expiration of the originally requested duration. 742 * %NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the 743 * radio. The %NL80211_ATTR_COOKIE attribute must be given as well to 744 * uniquely identify the request. 745 * This command is also used as an event to notify when a requested 746 * remain-on-channel duration has expired. 747 * 748 * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX 749 * rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface 750 * and @NL80211_ATTR_TX_RATES the set of allowed rates. 751 * 752 * @NL80211_CMD_REGISTER_FRAME: Register for receiving certain mgmt frames 753 * (via @NL80211_CMD_FRAME) for processing in userspace. This command 754 * requires an interface index, a frame type attribute (optional for 755 * backward compatibility reasons, if not given assumes action frames) 756 * and a match attribute containing the first few bytes of the frame 757 * that should match, e.g. a single byte for only a category match or 758 * four bytes for vendor frames including the OUI. The registration 759 * cannot be dropped, but is removed automatically when the netlink 760 * socket is closed. Multiple registrations can be made. 761 * The %NL80211_ATTR_RECEIVE_MULTICAST flag attribute can be given if 762 * %NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS is available, in which 763 * case the registration can also be modified to include/exclude the 764 * flag, rather than requiring unregistration to change it. 765 * @NL80211_CMD_REGISTER_ACTION: Alias for @NL80211_CMD_REGISTER_FRAME for 766 * backward compatibility 767 * @NL80211_CMD_FRAME: Management frame TX request and RX notification. This 768 * command is used both as a request to transmit a management frame and 769 * as an event indicating reception of a frame that was not processed in 770 * kernel code, but is for us (i.e., which may need to be processed in a 771 * user space application). %NL80211_ATTR_FRAME is used to specify the 772 * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used 773 * to indicate on which channel the frame is to be transmitted or was 774 * received. If this channel is not the current channel (remain-on-channel 775 * or the operational channel) the device will switch to the given channel 776 * and transmit the frame, optionally waiting for a response for the time 777 * specified using %NL80211_ATTR_DURATION. When called, this operation 778 * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the 779 * TX status event pertaining to the TX request. 780 * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the 781 * management frames at CCK rate or not in 2GHz band. 782 * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA 783 * counters which will be updated to the current value. This attribute 784 * is used during CSA period. 785 * For TX on an MLD, the frequency can be omitted and the link ID be 786 * specified, or if transmitting to a known peer MLD (with MLD addresses 787 * in the frame) both can be omitted and the link will be selected by 788 * lower layers. 789 * For RX notification, %NL80211_ATTR_RX_HW_TIMESTAMP may be included to 790 * indicate the frame RX timestamp and %NL80211_ATTR_TX_HW_TIMESTAMP may 791 * be included to indicate the ack TX timestamp. 792 * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this 793 * command may be used with the corresponding cookie to cancel the wait 794 * time if it is known that it is no longer necessary. This command is 795 * also sent as an event whenever the driver has completed the off-channel 796 * wait time. 797 * @NL80211_CMD_ACTION: Alias for @NL80211_CMD_FRAME for backward compatibility. 798 * @NL80211_CMD_FRAME_TX_STATUS: Report TX status of a management frame 799 * transmitted with %NL80211_CMD_FRAME. %NL80211_ATTR_COOKIE identifies 800 * the TX command and %NL80211_ATTR_FRAME includes the contents of the 801 * frame. %NL80211_ATTR_ACK flag is included if the recipient acknowledged 802 * the frame. %NL80211_ATTR_TX_HW_TIMESTAMP may be included to indicate the 803 * tx timestamp and %NL80211_ATTR_RX_HW_TIMESTAMP may be included to 804 * indicate the ack RX timestamp. 805 * @NL80211_CMD_ACTION_TX_STATUS: Alias for @NL80211_CMD_FRAME_TX_STATUS for 806 * backward compatibility. 807 * 808 * @NL80211_CMD_SET_POWER_SAVE: Set powersave, using %NL80211_ATTR_PS_STATE 809 * @NL80211_CMD_GET_POWER_SAVE: Get powersave status in %NL80211_ATTR_PS_STATE 810 * 811 * @NL80211_CMD_SET_CQM: Connection quality monitor configuration. This command 812 * is used to configure connection quality monitoring notification trigger 813 * levels. 814 * @NL80211_CMD_NOTIFY_CQM: Connection quality monitor notification. This 815 * command is used as an event to indicate the that a trigger level was 816 * reached. 817 * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ 818 * and the attributes determining channel width) the given interface 819 * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. 820 * In case multiple channels are supported by the device, the mechanism 821 * with which it switches channels is implementation-defined. 822 * When a monitor interface is given, it can only switch channel while 823 * no other interfaces are operating to avoid disturbing the operation 824 * of any other interfaces, and other interfaces will again take 825 * precedence when they are used. 826 * 827 * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface 828 * (no longer supported). 829 * 830 * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform 831 * multicast to unicast conversion. When enabled, all multicast packets 832 * with ethertype ARP, IPv4 or IPv6 (possibly within an 802.1Q header) 833 * will be sent out to each station once with the destination (multicast) 834 * MAC address replaced by the station's MAC address. Note that this may 835 * break certain expectations of the receiver, e.g. the ability to drop 836 * unicast IP packets encapsulated in multicast L2 frames, or the ability 837 * to not send destination unreachable messages in such cases. 838 * This can only be toggled per BSS. Configure this on an interface of 839 * type %NL80211_IFTYPE_AP. It applies to all its VLAN interfaces 840 * (%NL80211_IFTYPE_AP_VLAN), except for those in 4addr (WDS) mode. 841 * If %NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED is not present with this 842 * command, the feature is disabled. 843 * 844 * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial 845 * mesh config parameters may be given. 846 * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the 847 * network is determined by the network interface. 848 * 849 * @NL80211_CMD_UNPROT_DEAUTHENTICATE: Unprotected deauthentication frame 850 * notification. This event is used to indicate that an unprotected 851 * deauthentication frame was dropped when MFP is in use. 852 * @NL80211_CMD_UNPROT_DISASSOCIATE: Unprotected disassociation frame 853 * notification. This event is used to indicate that an unprotected 854 * disassociation frame was dropped when MFP is in use. 855 * 856 * @NL80211_CMD_NEW_PEER_CANDIDATE: Notification on the reception of a 857 * beacon or probe response from a compatible mesh peer. This is only 858 * sent while no station information (sta_info) exists for the new peer 859 * candidate and when @NL80211_MESH_SETUP_USERSPACE_AUTH, 860 * @NL80211_MESH_SETUP_USERSPACE_AMPE, or 861 * @NL80211_MESH_SETUP_USERSPACE_MPM is set. On reception of this 862 * notification, userspace may decide to create a new station 863 * (@NL80211_CMD_NEW_STATION). To stop this notification from 864 * reoccurring, the userspace authentication daemon may want to create the 865 * new station with the AUTHENTICATED flag unset and maybe change it later 866 * depending on the authentication result. 867 * 868 * @NL80211_CMD_GET_WOWLAN: get Wake-on-Wireless-LAN (WoWLAN) settings. 869 * @NL80211_CMD_SET_WOWLAN: set Wake-on-Wireless-LAN (WoWLAN) settings. 870 * Since wireless is more complex than wired ethernet, it supports 871 * various triggers. These triggers can be configured through this 872 * command with the %NL80211_ATTR_WOWLAN_TRIGGERS attribute. For 873 * more background information, see 874 * https://wireless.wiki.kernel.org/en/users/Documentation/WoWLAN. 875 * The @NL80211_CMD_SET_WOWLAN command can also be used as a notification 876 * from the driver reporting the wakeup reason. In this case, the 877 * @NL80211_ATTR_WOWLAN_TRIGGERS attribute will contain the reason 878 * for the wakeup, if it was caused by wireless. If it is not present 879 * in the wakeup notification, the wireless device didn't cause the 880 * wakeup but reports that it was woken up. 881 * 882 * @NL80211_CMD_SET_REKEY_OFFLOAD: This command is used give the driver 883 * the necessary information for supporting GTK rekey offload. This 884 * feature is typically used during WoWLAN. The configuration data 885 * is contained in %NL80211_ATTR_REKEY_DATA (which is nested and 886 * contains the data in sub-attributes). After rekeying happened, 887 * this command may also be sent by the driver as an MLME event to 888 * inform userspace of the new replay counter. 889 * 890 * @NL80211_CMD_PMKSA_CANDIDATE: This is used as an event to inform userspace 891 * of PMKSA caching dandidates. 892 * 893 * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). 894 * In addition, this can be used as an event to request userspace to take 895 * actions on TDLS links (set up a new link or tear down an existing one). 896 * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested 897 * operation, %NL80211_ATTR_MAC contains the peer MAC address, and 898 * %NL80211_ATTR_REASON_CODE the reason code to be used (only with 899 * %NL80211_TDLS_TEARDOWN). 900 * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. The 901 * %NL80211_ATTR_TDLS_ACTION attribute determines the type of frame to be 902 * sent. Public Action codes (802.11-2012 8.1.5.1) will be sent as 903 * 802.11 management frames, while TDLS action codes (802.11-2012 904 * 8.5.13.1) will be encapsulated and sent as data frames. The currently 905 * supported Public Action code is %WLAN_PUB_ACTION_TDLS_DISCOVER_RES 906 * and the currently supported TDLS actions codes are given in 907 * &enum ieee80211_tdls_actioncode. 908 * 909 * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP 910 * (or GO) interface (i.e. hostapd) to ask for unexpected frames to 911 * implement sending deauth to stations that send unexpected class 3 912 * frames. Also used as the event sent by the kernel when such a frame 913 * is received. 914 * For the event, the %NL80211_ATTR_MAC attribute carries the TA and 915 * other attributes like the interface index are present. 916 * If used as the command it must have an interface index and you can 917 * only unsubscribe from the event by closing the socket. Subscription 918 * is also for %NL80211_CMD_UNEXPECTED_4ADDR_FRAME events. 919 * 920 * @NL80211_CMD_UNEXPECTED_4ADDR_FRAME: Sent as an event indicating that the 921 * associated station identified by %NL80211_ATTR_MAC sent a 4addr frame 922 * and wasn't already in a 4-addr VLAN. The event will be sent similarly 923 * to the %NL80211_CMD_UNEXPECTED_FRAME event, to the same listener. 924 * 925 * @NL80211_CMD_PROBE_CLIENT: Probe an associated station on an AP interface 926 * by sending a null data frame to it and reporting when the frame is 927 * acknowleged. This is used to allow timing out inactive clients. Uses 928 * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_MAC. The command returns a 929 * direct reply with an %NL80211_ATTR_COOKIE that is later used to match 930 * up the event with the request. The event includes the same data and 931 * has %NL80211_ATTR_ACK set if the frame was ACKed. 932 * 933 * @NL80211_CMD_REGISTER_BEACONS: Register this socket to receive beacons from 934 * other BSSes when any interfaces are in AP mode. This helps implement 935 * OLBC handling in hostapd. Beacons are reported in %NL80211_CMD_FRAME 936 * messages. Note that per PHY only one application may register. 937 * 938 * @NL80211_CMD_SET_NOACK_MAP: sets a bitmap for the individual TIDs whether 939 * No Acknowledgement Policy should be applied. 940 * 941 * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels 942 * independently of the userspace SME, send this event indicating 943 * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the 944 * attributes determining channel width. This indication may also be 945 * sent when a remotely-initiated switch (e.g., when a STA receives a CSA 946 * from the remote AP) is completed; 947 * 948 * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch 949 * has been started on an interface, regardless of the initiator 950 * (ie. whether it was requested from a remote device or 951 * initiated on our own). It indicates that 952 * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ 953 * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may 954 * decide to react to this indication by requesting other 955 * interfaces to change channel as well. 956 * 957 * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by 958 * its %NL80211_ATTR_WDEV identifier. It must have been created with 959 * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the 960 * P2P Device can be used for P2P operations, e.g. remain-on-channel and 961 * public action frame TX. 962 * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by 963 * its %NL80211_ATTR_WDEV identifier. 964 * 965 * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to 966 * notify userspace that AP has rejected the connection request from a 967 * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON 968 * is used for this. 969 * 970 * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames 971 * for IBSS or MESH vif. 972 * 973 * @NL80211_CMD_SET_MAC_ACL: sets ACL for MAC address based access control. 974 * This is to be used with the drivers advertising the support of MAC 975 * address based access control. List of MAC addresses is passed in 976 * %NL80211_ATTR_MAC_ADDRS and ACL policy is passed in 977 * %NL80211_ATTR_ACL_POLICY. Driver will enable ACL with this list, if it 978 * is not already done. The new list will replace any existing list. Driver 979 * will clear its ACL when the list of MAC addresses passed is empty. This 980 * command is used in AP/P2P GO mode. Driver has to make sure to clear its 981 * ACL list during %NL80211_CMD_STOP_AP. 982 * 983 * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once 984 * a radar is detected or the channel availability scan (CAC) has finished 985 * or was aborted, or a radar was detected, usermode will be notified with 986 * this event. This command is also used to notify userspace about radars 987 * while operating on this channel. 988 * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the 989 * event. 990 * 991 * @NL80211_CMD_GET_PROTOCOL_FEATURES: Get global nl80211 protocol features, 992 * i.e. features for the nl80211 protocol rather than device features. 993 * Returns the features in the %NL80211_ATTR_PROTOCOL_FEATURES bitmap. 994 * 995 * @NL80211_CMD_UPDATE_FT_IES: Pass down the most up-to-date Fast Transition 996 * Information Element to the WLAN driver 997 * 998 * @NL80211_CMD_FT_EVENT: Send a Fast transition event from the WLAN driver 999 * to the supplicant. This will carry the target AP's MAC address along 1000 * with the relevant Information Elements. This event is used to report 1001 * received FT IEs (MDIE, FTIE, RSN IE, TIE, RICIE). 1002 * 1003 * @NL80211_CMD_CRIT_PROTOCOL_START: Indicates user-space will start running 1004 * a critical protocol that needs more reliability in the connection to 1005 * complete. 1006 * 1007 * @NL80211_CMD_CRIT_PROTOCOL_STOP: Indicates the connection reliability can 1008 * return back to normal. 1009 * 1010 * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. 1011 * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. 1012 * 1013 * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the 1014 * new channel information (Channel Switch Announcement - CSA) 1015 * in the beacon for some time (as defined in the 1016 * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the 1017 * new channel. Userspace provides the new channel information (using 1018 * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel 1019 * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform 1020 * other station that transmission must be blocked until the channel 1021 * switch is complete. 1022 * 1023 * @NL80211_CMD_VENDOR: Vendor-specified command/event. The command is specified 1024 * by the %NL80211_ATTR_VENDOR_ID attribute and a sub-command in 1025 * %NL80211_ATTR_VENDOR_SUBCMD. Parameter(s) can be transported in 1026 * %NL80211_ATTR_VENDOR_DATA. 1027 * For feature advertisement, the %NL80211_ATTR_VENDOR_DATA attribute is 1028 * used in the wiphy data as a nested attribute containing descriptions 1029 * (&struct nl80211_vendor_cmd_info) of the supported vendor commands. 1030 * This may also be sent as an event with the same attributes. 1031 * 1032 * @NL80211_CMD_SET_QOS_MAP: Set Interworking QoS mapping for IP DSCP values. 1033 * The QoS mapping information is included in %NL80211_ATTR_QOS_MAP. If 1034 * that attribute is not included, QoS mapping is disabled. Since this 1035 * QoS mapping is relevant for IP packets, it is only valid during an 1036 * association. This is cleared on disassociation and AP restart. 1037 * 1038 * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given 1039 * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO 1040 * and %NL80211_ATTR_ADMITTED_TIME parameters. 1041 * Note that the action frame handshake with the AP shall be handled by 1042 * userspace via the normal management RX/TX framework, this only sets 1043 * up the TX TS in the driver/device. 1044 * If the admitted time attribute is not added then the request just checks 1045 * if a subsequent setup could be successful, the intent is to use this to 1046 * avoid setting up a session with the AP when local restrictions would 1047 * make that impossible. However, the subsequent "real" setup may still 1048 * fail even if the check was successful. 1049 * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID 1050 * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this 1051 * before removing a station entry entirely, or before disassociating 1052 * or similar, cleanup will happen in the driver/device in this case. 1053 * 1054 * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to 1055 * destination %NL80211_ATTR_MAC on the interface identified by 1056 * %NL80211_ATTR_IFINDEX. 1057 * 1058 * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and 1059 * bandwidth of a channel must be given. 1060 * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the 1061 * network is determined by the network interface. 1062 * 1063 * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer, 1064 * identified by the %NL80211_ATTR_MAC parameter. A target channel is 1065 * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining 1066 * channel width/type. The target operating class is given via 1067 * %NL80211_ATTR_OPER_CLASS. 1068 * The driver is responsible for continually initiating channel-switching 1069 * operations and returning to the base channel for communication with the 1070 * AP. 1071 * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS 1072 * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel 1073 * when this command completes. 1074 * 1075 * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used 1076 * as an event to indicate changes for devices with wiphy-specific regdom 1077 * management. 1078 * 1079 * @NL80211_CMD_ABORT_SCAN: Stop an ongoing scan. Returns -ENOENT if a scan is 1080 * not running. The driver indicates the status of the scan through 1081 * cfg80211_scan_done(). 1082 * 1083 * @NL80211_CMD_START_NAN: Start NAN operation, identified by its 1084 * %NL80211_ATTR_WDEV interface. This interface must have been 1085 * previously created with %NL80211_CMD_NEW_INTERFACE. After it 1086 * has been started, the NAN interface will create or join a 1087 * cluster. This command must have a valid 1088 * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional 1089 * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is 1090 * omitted or set to 0, it means don't-care and the device will 1091 * decide what to use. After this command NAN functions can be 1092 * added. 1093 * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by 1094 * its %NL80211_ATTR_WDEV interface. 1095 * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined 1096 * with %NL80211_ATTR_NAN_FUNC nested attribute. When called, this 1097 * operation returns the strictly positive and unique instance id 1098 * (%NL80211_ATTR_NAN_FUNC_INST_ID) and a cookie (%NL80211_ATTR_COOKIE) 1099 * of the function upon success. 1100 * Since instance ID's can be re-used, this cookie is the right 1101 * way to identify the function. This will avoid races when a termination 1102 * event is handled by the user space after it has already added a new 1103 * function that got the same instance id from the kernel as the one 1104 * which just terminated. 1105 * This cookie may be used in NAN events even before the command 1106 * returns, so userspace shouldn't process NAN events until it processes 1107 * the response to this command. 1108 * Look at %NL80211_ATTR_SOCKET_OWNER as well. 1109 * @NL80211_CMD_DEL_NAN_FUNCTION: Delete a NAN function by cookie. 1110 * This command is also used as a notification sent when a NAN function is 1111 * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID 1112 * and %NL80211_ATTR_COOKIE attributes. 1113 * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN 1114 * configuration. NAN must be operational (%NL80211_CMD_START_NAN 1115 * was executed). It must contain at least one of the following 1116 * attributes: %NL80211_ATTR_NAN_MASTER_PREF, 1117 * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the 1118 * current configuration is not changed. If it is present but 1119 * set to zero, the configuration is changed to don't-care 1120 * (i.e. the device can decide what to do). 1121 * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. 1122 * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and 1123 * %NL80211_ATTR_COOKIE. 1124 * 1125 * @NL80211_CMD_UPDATE_CONNECT_PARAMS: Update one or more connect parameters 1126 * for subsequent roaming cases if the driver or firmware uses internal 1127 * BSS selection. This command can be issued only while connected and it 1128 * does not result in a change for the current association. Currently, 1129 * only the %NL80211_ATTR_IE data is used and updated with this command. 1130 * 1131 * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 1132 * for the given authenticator address (specified with %NL80211_ATTR_MAC). 1133 * When %NL80211_ATTR_PMKR0_NAME is set, %NL80211_ATTR_PMK specifies the 1134 * PMK-R0, otherwise it specifies the PMK. 1135 * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously 1136 * configured PMK for the authenticator address identified by 1137 * %NL80211_ATTR_MAC. 1138 * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was 1139 * completed successfully. Drivers that support 4 way handshake offload 1140 * should send this event after indicating 802.1X FT assocation with 1141 * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT 1142 * should be indicated instead. 1143 * @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request 1144 * and RX notification. This command is used both as a request to transmit 1145 * a control port frame and as a notification that a control port frame 1146 * has been received. %NL80211_ATTR_FRAME is used to specify the 1147 * frame contents. The frame is the raw EAPoL data, without ethernet or 1148 * 802.11 headers. 1149 * For an MLD transmitter, the %NL80211_ATTR_MLO_LINK_ID may be given and 1150 * its effect will depend on the destination: If the destination is known 1151 * to be an MLD, this will be used as a hint to select the link to transmit 1152 * the frame on. If the destination is not an MLD, this will select both 1153 * the link to transmit on and the source address will be set to the link 1154 * address of that link. 1155 * When used as an event indication %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 1156 * %NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT and %NL80211_ATTR_MAC are added 1157 * indicating the protocol type of the received frame; whether the frame 1158 * was received unencrypted and the MAC address of the peer respectively. 1159 * 1160 * @NL80211_CMD_RELOAD_REGDB: Request that the regdb firmware file is reloaded. 1161 * 1162 * @NL80211_CMD_EXTERNAL_AUTH: This interface is exclusively defined for host 1163 * drivers that do not define separate commands for authentication and 1164 * association, but rely on user space for the authentication to happen. 1165 * This interface acts both as the event request (driver to user space) 1166 * to trigger the authentication and command response (userspace to 1167 * driver) to indicate the authentication status. 1168 * 1169 * User space uses the %NL80211_CMD_CONNECT command to the host driver to 1170 * trigger a connection. The host driver selects a BSS and further uses 1171 * this interface to offload only the authentication part to the user 1172 * space. Authentication frames are passed between the driver and user 1173 * space through the %NL80211_CMD_FRAME interface. Host driver proceeds 1174 * further with the association after getting successful authentication 1175 * status. User space indicates the authentication status through 1176 * %NL80211_ATTR_STATUS_CODE attribute in %NL80211_CMD_EXTERNAL_AUTH 1177 * command interface. 1178 * 1179 * Host driver sends MLD address of the AP with %NL80211_ATTR_MLD_ADDR in 1180 * %NL80211_CMD_EXTERNAL_AUTH event to indicate user space to enable MLO 1181 * during the authentication offload in STA mode while connecting to MLD 1182 * APs. Host driver should check %NL80211_ATTR_MLO_SUPPORT flag capability 1183 * in %NL80211_CMD_CONNECT to know whether the user space supports enabling 1184 * MLO during the authentication offload or not. 1185 * User space should enable MLO during the authentication only when it 1186 * receives the AP MLD address in authentication offload request. User 1187 * space shouldn't enable MLO when the authentication offload request 1188 * doesn't indicate the AP MLD address even if the AP is MLO capable. 1189 * User space should use %NL80211_ATTR_MLD_ADDR as peer's MLD address and 1190 * interface address identified by %NL80211_ATTR_IFINDEX as self MLD 1191 * address. User space and host driver to use MLD addresses in RA, TA and 1192 * BSSID fields of the frames between them, and host driver translates the 1193 * MLD addresses to/from link addresses based on the link chosen for the 1194 * authentication. 1195 * 1196 * Host driver reports this status on an authentication failure to the 1197 * user space through the connect result as the user space would have 1198 * initiated the connection through the connect request. 1199 * 1200 * @NL80211_CMD_STA_OPMODE_CHANGED: An event that notify station's 1201 * ht opmode or vht opmode changes using any of %NL80211_ATTR_SMPS_MODE, 1202 * %NL80211_ATTR_CHANNEL_WIDTH,%NL80211_ATTR_NSS attributes with its 1203 * address(specified in %NL80211_ATTR_MAC). 1204 * 1205 * @NL80211_CMD_GET_FTM_RESPONDER_STATS: Retrieve FTM responder statistics, in 1206 * the %NL80211_ATTR_FTM_RESPONDER_STATS attribute. 1207 * 1208 * @NL80211_CMD_PEER_MEASUREMENT_START: start a (set of) peer measurement(s) 1209 * with the given parameters, which are encapsulated in the nested 1210 * %NL80211_ATTR_PEER_MEASUREMENTS attribute. Optionally, MAC address 1211 * randomization may be enabled and configured by specifying the 1212 * %NL80211_ATTR_MAC and %NL80211_ATTR_MAC_MASK attributes. 1213 * If a timeout is requested, use the %NL80211_ATTR_TIMEOUT attribute. 1214 * A u64 cookie for further %NL80211_ATTR_COOKIE use is returned in 1215 * the netlink extended ack message. 1216 * 1217 * To cancel a measurement, close the socket that requested it. 1218 * 1219 * Measurement results are reported to the socket that requested the 1220 * measurement using @NL80211_CMD_PEER_MEASUREMENT_RESULT when they 1221 * become available, so applications must ensure a large enough socket 1222 * buffer size. 1223 * 1224 * Depending on driver support it may or may not be possible to start 1225 * multiple concurrent measurements. 1226 * @NL80211_CMD_PEER_MEASUREMENT_RESULT: This command number is used for the 1227 * result notification from the driver to the requesting socket. 1228 * @NL80211_CMD_PEER_MEASUREMENT_COMPLETE: Notification only, indicating that 1229 * the measurement completed, using the measurement cookie 1230 * (%NL80211_ATTR_COOKIE). 1231 * 1232 * @NL80211_CMD_NOTIFY_RADAR: Notify the kernel that a radar signal was 1233 * detected and reported by a neighboring device on the channel 1234 * indicated by %NL80211_ATTR_WIPHY_FREQ and other attributes 1235 * determining the width and type. 1236 * 1237 * @NL80211_CMD_UPDATE_OWE_INFO: This interface allows the host driver to 1238 * offload OWE processing to user space. This intends to support 1239 * OWE AKM by the host drivers that implement SME but rely 1240 * on the user space for the cryptographic/DH IE processing in AP mode. 1241 * 1242 * @NL80211_CMD_PROBE_MESH_LINK: The requirement for mesh link metric 1243 * refreshing, is that from one mesh point we be able to send some data 1244 * frames to other mesh points which are not currently selected as a 1245 * primary traffic path, but which are only 1 hop away. The absence of 1246 * the primary path to the chosen node makes it necessary to apply some 1247 * form of marking on a chosen packet stream so that the packets can be 1248 * properly steered to the selected node for testing, and not by the 1249 * regular mesh path lookup. Further, the packets must be of type data 1250 * so that the rate control (often embedded in firmware) is used for 1251 * rate selection. 1252 * 1253 * Here attribute %NL80211_ATTR_MAC is used to specify connected mesh 1254 * peer MAC address and %NL80211_ATTR_FRAME is used to specify the frame 1255 * content. The frame is ethernet data. 1256 * 1257 * @NL80211_CMD_SET_TID_CONFIG: Data frame TID specific configuration 1258 * is passed using %NL80211_ATTR_TID_CONFIG attribute. 1259 * 1260 * @NL80211_CMD_UNPROT_BEACON: Unprotected or incorrectly protected Beacon 1261 * frame. This event is used to indicate that a received Beacon frame was 1262 * dropped because it did not include a valid MME MIC while beacon 1263 * protection was enabled (BIGTK configured in station mode). 1264 * 1265 * @NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS: Report TX status of a control 1266 * port frame transmitted with %NL80211_CMD_CONTROL_PORT_FRAME. 1267 * %NL80211_ATTR_COOKIE identifies the TX command and %NL80211_ATTR_FRAME 1268 * includes the contents of the frame. %NL80211_ATTR_ACK flag is included 1269 * if the recipient acknowledged the frame. 1270 * 1271 * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is 1272 * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to 1273 * specify the wiphy index to be applied to. 1274 * 1275 * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever 1276 * mac80211/drv detects a bss color collision. 1277 * 1278 * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that 1279 * userspace wants to change the BSS color. 1280 * 1281 * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has 1282 * started 1283 * 1284 * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has 1285 * been aborted 1286 * 1287 * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change 1288 * has completed 1289 * 1290 * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using - 1291 * &NL80211_ATTR_MAC - for STA MAC address 1292 * &NL80211_ATTR_FILS_KEK - for KEK 1293 * &NL80211_ATTR_FILS_NONCES - for FILS Nonces 1294 * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) 1295 * 1296 * @NL80211_CMD_ASSOC_COMEBACK: notification about an association 1297 * temporal rejection with comeback. The event includes %NL80211_ATTR_MAC 1298 * to describe the BSSID address of the AP and %NL80211_ATTR_TIMEOUT to 1299 * specify the timeout value. 1300 * 1301 * @NL80211_CMD_ADD_LINK: Add a new link to an interface. The 1302 * %NL80211_ATTR_MLO_LINK_ID attribute is used for the new link. 1303 * @NL80211_CMD_REMOVE_LINK: Remove a link from an interface. This may come 1304 * without %NL80211_ATTR_MLO_LINK_ID as an easy way to remove all links 1305 * in preparation for e.g. roaming to a regular (non-MLO) AP. 1306 * 1307 * @NL80211_CMD_ADD_LINK_STA: Add a link to an MLD station 1308 * @NL80211_CMD_MODIFY_LINK_STA: Modify a link of an MLD station 1309 * @NL80211_CMD_REMOVE_LINK_STA: Remove a link of an MLD station 1310 * 1311 * @NL80211_CMD_SET_HW_TIMESTAMP: Enable/disable HW timestamping of Timing 1312 * measurement and Fine timing measurement frames. If %NL80211_ATTR_MAC 1313 * is included, enable/disable HW timestamping only for frames to/from the 1314 * specified MAC address. Otherwise enable/disable HW timestamping for 1315 * all TM/FTM frames (including ones that were enabled with specific MAC 1316 * address). If %NL80211_ATTR_HW_TIMESTAMP_ENABLED is not included, disable 1317 * HW timestamping. 1318 * The number of peers that HW timestamping can be enabled for concurrently 1319 * is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS. 1320 * 1321 * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD 1322 * setup links due to AP MLD removing the corresponding affiliated APs with 1323 * Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide 1324 * information about the removed STA MLD setup links. 1325 * 1326 * @NL80211_CMD_MAX: highest used command number 1327 * @__NL80211_CMD_AFTER_LAST: internal use 1328 */ 1329 enum nl80211_commands { 1330 /* don't change the order or add anything between, this is ABI! */ 1331 NL80211_CMD_UNSPEC, 1332 1333 NL80211_CMD_GET_WIPHY, /* can dump */ 1334 NL80211_CMD_SET_WIPHY, 1335 NL80211_CMD_NEW_WIPHY, 1336 NL80211_CMD_DEL_WIPHY, 1337 1338 NL80211_CMD_GET_INTERFACE, /* can dump */ 1339 NL80211_CMD_SET_INTERFACE, 1340 NL80211_CMD_NEW_INTERFACE, 1341 NL80211_CMD_DEL_INTERFACE, 1342 1343 NL80211_CMD_GET_KEY, 1344 NL80211_CMD_SET_KEY, 1345 NL80211_CMD_NEW_KEY, 1346 NL80211_CMD_DEL_KEY, 1347 1348 NL80211_CMD_GET_BEACON, 1349 NL80211_CMD_SET_BEACON, 1350 NL80211_CMD_START_AP, 1351 NL80211_CMD_NEW_BEACON = NL80211_CMD_START_AP, 1352 NL80211_CMD_STOP_AP, 1353 NL80211_CMD_DEL_BEACON = NL80211_CMD_STOP_AP, 1354 1355 NL80211_CMD_GET_STATION, 1356 NL80211_CMD_SET_STATION, 1357 NL80211_CMD_NEW_STATION, 1358 NL80211_CMD_DEL_STATION, 1359 1360 NL80211_CMD_GET_MPATH, 1361 NL80211_CMD_SET_MPATH, 1362 NL80211_CMD_NEW_MPATH, 1363 NL80211_CMD_DEL_MPATH, 1364 1365 NL80211_CMD_SET_BSS, 1366 1367 NL80211_CMD_SET_REG, 1368 NL80211_CMD_REQ_SET_REG, 1369 1370 NL80211_CMD_GET_MESH_CONFIG, 1371 NL80211_CMD_SET_MESH_CONFIG, 1372 1373 NL80211_CMD_SET_MGMT_EXTRA_IE /* reserved; not used */, 1374 1375 NL80211_CMD_GET_REG, 1376 1377 NL80211_CMD_GET_SCAN, 1378 NL80211_CMD_TRIGGER_SCAN, 1379 NL80211_CMD_NEW_SCAN_RESULTS, 1380 NL80211_CMD_SCAN_ABORTED, 1381 1382 NL80211_CMD_REG_CHANGE, 1383 1384 NL80211_CMD_AUTHENTICATE, 1385 NL80211_CMD_ASSOCIATE, 1386 NL80211_CMD_DEAUTHENTICATE, 1387 NL80211_CMD_DISASSOCIATE, 1388 1389 NL80211_CMD_MICHAEL_MIC_FAILURE, 1390 1391 NL80211_CMD_REG_BEACON_HINT, 1392 1393 NL80211_CMD_JOIN_IBSS, 1394 NL80211_CMD_LEAVE_IBSS, 1395 1396 NL80211_CMD_TESTMODE, 1397 1398 NL80211_CMD_CONNECT, 1399 NL80211_CMD_ROAM, 1400 NL80211_CMD_DISCONNECT, 1401 1402 NL80211_CMD_SET_WIPHY_NETNS, 1403 1404 NL80211_CMD_GET_SURVEY, 1405 NL80211_CMD_NEW_SURVEY_RESULTS, 1406 1407 NL80211_CMD_SET_PMKSA, 1408 NL80211_CMD_DEL_PMKSA, 1409 NL80211_CMD_FLUSH_PMKSA, 1410 1411 NL80211_CMD_REMAIN_ON_CHANNEL, 1412 NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL, 1413 1414 NL80211_CMD_SET_TX_BITRATE_MASK, 1415 1416 NL80211_CMD_REGISTER_FRAME, 1417 NL80211_CMD_REGISTER_ACTION = NL80211_CMD_REGISTER_FRAME, 1418 NL80211_CMD_FRAME, 1419 NL80211_CMD_ACTION = NL80211_CMD_FRAME, 1420 NL80211_CMD_FRAME_TX_STATUS, 1421 NL80211_CMD_ACTION_TX_STATUS = NL80211_CMD_FRAME_TX_STATUS, 1422 1423 NL80211_CMD_SET_POWER_SAVE, 1424 NL80211_CMD_GET_POWER_SAVE, 1425 1426 NL80211_CMD_SET_CQM, 1427 NL80211_CMD_NOTIFY_CQM, 1428 1429 NL80211_CMD_SET_CHANNEL, 1430 NL80211_CMD_SET_WDS_PEER, 1431 1432 NL80211_CMD_FRAME_WAIT_CANCEL, 1433 1434 NL80211_CMD_JOIN_MESH, 1435 NL80211_CMD_LEAVE_MESH, 1436 1437 NL80211_CMD_UNPROT_DEAUTHENTICATE, 1438 NL80211_CMD_UNPROT_DISASSOCIATE, 1439 1440 NL80211_CMD_NEW_PEER_CANDIDATE, 1441 1442 NL80211_CMD_GET_WOWLAN, 1443 NL80211_CMD_SET_WOWLAN, 1444 1445 NL80211_CMD_START_SCHED_SCAN, 1446 NL80211_CMD_STOP_SCHED_SCAN, 1447 NL80211_CMD_SCHED_SCAN_RESULTS, 1448 NL80211_CMD_SCHED_SCAN_STOPPED, 1449 1450 NL80211_CMD_SET_REKEY_OFFLOAD, 1451 1452 NL80211_CMD_PMKSA_CANDIDATE, 1453 1454 NL80211_CMD_TDLS_OPER, 1455 NL80211_CMD_TDLS_MGMT, 1456 1457 NL80211_CMD_UNEXPECTED_FRAME, 1458 1459 NL80211_CMD_PROBE_CLIENT, 1460 1461 NL80211_CMD_REGISTER_BEACONS, 1462 1463 NL80211_CMD_UNEXPECTED_4ADDR_FRAME, 1464 1465 NL80211_CMD_SET_NOACK_MAP, 1466 1467 NL80211_CMD_CH_SWITCH_NOTIFY, 1468 1469 NL80211_CMD_START_P2P_DEVICE, 1470 NL80211_CMD_STOP_P2P_DEVICE, 1471 1472 NL80211_CMD_CONN_FAILED, 1473 1474 NL80211_CMD_SET_MCAST_RATE, 1475 1476 NL80211_CMD_SET_MAC_ACL, 1477 1478 NL80211_CMD_RADAR_DETECT, 1479 1480 NL80211_CMD_GET_PROTOCOL_FEATURES, 1481 1482 NL80211_CMD_UPDATE_FT_IES, 1483 NL80211_CMD_FT_EVENT, 1484 1485 NL80211_CMD_CRIT_PROTOCOL_START, 1486 NL80211_CMD_CRIT_PROTOCOL_STOP, 1487 1488 NL80211_CMD_GET_COALESCE, 1489 NL80211_CMD_SET_COALESCE, 1490 1491 NL80211_CMD_CHANNEL_SWITCH, 1492 1493 NL80211_CMD_VENDOR, 1494 1495 NL80211_CMD_SET_QOS_MAP, 1496 1497 NL80211_CMD_ADD_TX_TS, 1498 NL80211_CMD_DEL_TX_TS, 1499 1500 NL80211_CMD_GET_MPP, 1501 1502 NL80211_CMD_JOIN_OCB, 1503 NL80211_CMD_LEAVE_OCB, 1504 1505 NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, 1506 1507 NL80211_CMD_TDLS_CHANNEL_SWITCH, 1508 NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, 1509 1510 NL80211_CMD_WIPHY_REG_CHANGE, 1511 1512 NL80211_CMD_ABORT_SCAN, 1513 1514 NL80211_CMD_START_NAN, 1515 NL80211_CMD_STOP_NAN, 1516 NL80211_CMD_ADD_NAN_FUNCTION, 1517 NL80211_CMD_DEL_NAN_FUNCTION, 1518 NL80211_CMD_CHANGE_NAN_CONFIG, 1519 NL80211_CMD_NAN_MATCH, 1520 1521 NL80211_CMD_SET_MULTICAST_TO_UNICAST, 1522 1523 NL80211_CMD_UPDATE_CONNECT_PARAMS, 1524 1525 NL80211_CMD_SET_PMK, 1526 NL80211_CMD_DEL_PMK, 1527 1528 NL80211_CMD_PORT_AUTHORIZED, 1529 1530 NL80211_CMD_RELOAD_REGDB, 1531 1532 NL80211_CMD_EXTERNAL_AUTH, 1533 1534 NL80211_CMD_STA_OPMODE_CHANGED, 1535 1536 NL80211_CMD_CONTROL_PORT_FRAME, 1537 1538 NL80211_CMD_GET_FTM_RESPONDER_STATS, 1539 1540 NL80211_CMD_PEER_MEASUREMENT_START, 1541 NL80211_CMD_PEER_MEASUREMENT_RESULT, 1542 NL80211_CMD_PEER_MEASUREMENT_COMPLETE, 1543 1544 NL80211_CMD_NOTIFY_RADAR, 1545 1546 NL80211_CMD_UPDATE_OWE_INFO, 1547 1548 NL80211_CMD_PROBE_MESH_LINK, 1549 1550 NL80211_CMD_SET_TID_CONFIG, 1551 1552 NL80211_CMD_UNPROT_BEACON, 1553 1554 NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, 1555 1556 NL80211_CMD_SET_SAR_SPECS, 1557 1558 NL80211_CMD_OBSS_COLOR_COLLISION, 1559 1560 NL80211_CMD_COLOR_CHANGE_REQUEST, 1561 1562 NL80211_CMD_COLOR_CHANGE_STARTED, 1563 NL80211_CMD_COLOR_CHANGE_ABORTED, 1564 NL80211_CMD_COLOR_CHANGE_COMPLETED, 1565 1566 NL80211_CMD_SET_FILS_AAD, 1567 1568 NL80211_CMD_ASSOC_COMEBACK, 1569 1570 NL80211_CMD_ADD_LINK, 1571 NL80211_CMD_REMOVE_LINK, 1572 1573 NL80211_CMD_ADD_LINK_STA, 1574 NL80211_CMD_MODIFY_LINK_STA, 1575 NL80211_CMD_REMOVE_LINK_STA, 1576 1577 NL80211_CMD_SET_HW_TIMESTAMP, 1578 1579 NL80211_CMD_LINKS_REMOVED, 1580 1581 /* add new commands above here */ 1582 1583 /* used to define NL80211_CMD_MAX below */ 1584 __NL80211_CMD_AFTER_LAST, 1585 NL80211_CMD_MAX = __NL80211_CMD_AFTER_LAST - 1 1586 }; 1587 1588 /* 1589 * Allow user space programs to use #ifdef on new commands by defining them 1590 * here 1591 */ 1592 #define NL80211_CMD_SET_BSS NL80211_CMD_SET_BSS 1593 #define NL80211_CMD_SET_MGMT_EXTRA_IE NL80211_CMD_SET_MGMT_EXTRA_IE 1594 #define NL80211_CMD_REG_CHANGE NL80211_CMD_REG_CHANGE 1595 #define NL80211_CMD_AUTHENTICATE NL80211_CMD_AUTHENTICATE 1596 #define NL80211_CMD_ASSOCIATE NL80211_CMD_ASSOCIATE 1597 #define NL80211_CMD_DEAUTHENTICATE NL80211_CMD_DEAUTHENTICATE 1598 #define NL80211_CMD_DISASSOCIATE NL80211_CMD_DISASSOCIATE 1599 #define NL80211_CMD_REG_BEACON_HINT NL80211_CMD_REG_BEACON_HINT 1600 1601 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS 1602 1603 /* source-level API compatibility */ 1604 #define NL80211_CMD_GET_MESH_PARAMS NL80211_CMD_GET_MESH_CONFIG 1605 #define NL80211_CMD_SET_MESH_PARAMS NL80211_CMD_SET_MESH_CONFIG 1606 #define NL80211_MESH_SETUP_VENDOR_PATH_SEL_IE NL80211_MESH_SETUP_IE 1607 1608 /** 1609 * enum nl80211_attrs - nl80211 netlink attributes 1610 * 1611 * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors 1612 * 1613 * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. 1614 * /sys/class/ieee80211/<phyname>/index 1615 * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) 1616 * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters 1617 * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, 1618 * defines the channel together with the (deprecated) 1619 * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes 1620 * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 1621 * and %NL80211_ATTR_CENTER_FREQ2 1622 * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values 1623 * of &enum nl80211_chan_width, describing the channel width. See the 1624 * documentation of the enum for more information. 1625 * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the 1626 * channel, used for anything but 20 MHz bandwidth. In S1G this is the 1627 * operating channel center frequency. 1628 * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the 1629 * channel, used only for 80+80 MHz bandwidth 1630 * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ 1631 * if HT20 or HT40 are to be used (i.e., HT disabled if not included): 1632 * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including 1633 * this attribute) 1634 * NL80211_CHAN_HT20 = HT20 only 1635 * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel 1636 * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel 1637 * This attribute is now deprecated. 1638 * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is 1639 * less than or equal to the RTS threshold; allowed range: 1..255; 1640 * dot11ShortRetryLimit; u8 1641 * @NL80211_ATTR_WIPHY_RETRY_LONG: TX retry limit for frames whose length is 1642 * greater than the RTS threshold; allowed range: 1..255; 1643 * dot11ShortLongLimit; u8 1644 * @NL80211_ATTR_WIPHY_FRAG_THRESHOLD: fragmentation threshold, i.e., maximum 1645 * length in octets for frames; allowed range: 256..8000, disable 1646 * fragmentation with (u32)-1; dot11FragmentationThreshold; u32 1647 * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length 1648 * larger than or equal to this use RTS/CTS handshake); allowed range: 1649 * 0..65536, disable with (u32)-1; dot11RTSThreshold; u32 1650 * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11 1651 * section 7.3.2.9; dot11CoverageClass; u8 1652 * 1653 * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on 1654 * @NL80211_ATTR_IFNAME: network interface name 1655 * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype 1656 * 1657 * @NL80211_ATTR_WDEV: wireless device identifier, used for pseudo-devices 1658 * that don't have a netdev (u64) 1659 * 1660 * @NL80211_ATTR_MAC: MAC address (various uses) 1661 * 1662 * @NL80211_ATTR_KEY_DATA: (temporal) key data; for TKIP this consists of 1663 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC 1664 * keys 1665 * @NL80211_ATTR_KEY_IDX: key ID (u8, 0-3) 1666 * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 1667 * section 7.3.2.25.1, e.g. 0x000FAC04) 1668 * @NL80211_ATTR_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and 1669 * CCMP keys, each six bytes in little endian 1670 * @NL80211_ATTR_KEY_DEFAULT: Flag attribute indicating the key is default key 1671 * @NL80211_ATTR_KEY_DEFAULT_MGMT: Flag attribute indicating the key is the 1672 * default management key 1673 * @NL80211_ATTR_CIPHER_SUITES_PAIRWISE: For crypto settings for connect or 1674 * other commands, indicates which pairwise cipher suites are used 1675 * @NL80211_ATTR_CIPHER_SUITE_GROUP: For crypto settings for connect or 1676 * other commands, indicates which group cipher suite is used 1677 * 1678 * @NL80211_ATTR_BEACON_INTERVAL: beacon interval in TU 1679 * @NL80211_ATTR_DTIM_PERIOD: DTIM period for beaconing 1680 * @NL80211_ATTR_BEACON_HEAD: portion of the beacon before the TIM IE 1681 * @NL80211_ATTR_BEACON_TAIL: portion of the beacon after the TIM IE 1682 * 1683 * @NL80211_ATTR_STA_AID: Association ID for the station (u16) 1684 * @NL80211_ATTR_STA_FLAGS: flags, nested element with NLA_FLAG attributes of 1685 * &enum nl80211_sta_flags (deprecated, use %NL80211_ATTR_STA_FLAGS2) 1686 * @NL80211_ATTR_STA_LISTEN_INTERVAL: listen interval as defined by 1687 * IEEE 802.11 7.3.1.6 (u16). 1688 * @NL80211_ATTR_STA_SUPPORTED_RATES: supported rates, array of supported 1689 * rates as defined by IEEE 802.11 7.3.2.2 but without the length 1690 * restriction (at most %NL80211_MAX_SUPP_RATES). 1691 * @NL80211_ATTR_STA_VLAN: interface index of VLAN interface to move station 1692 * to, or the AP interface the station was originally added to. 1693 * @NL80211_ATTR_STA_INFO: information about a station, part of station info 1694 * given for %NL80211_CMD_GET_STATION, nested attribute containing 1695 * info as possible, see &enum nl80211_sta_info. 1696 * 1697 * @NL80211_ATTR_WIPHY_BANDS: Information about an operating bands, 1698 * consisting of a nested array. 1699 * 1700 * @NL80211_ATTR_MESH_ID: mesh id (1-32 bytes). 1701 * @NL80211_ATTR_STA_PLINK_ACTION: action to perform on the mesh peer link 1702 * (see &enum nl80211_plink_action). 1703 * @NL80211_ATTR_MPATH_NEXT_HOP: MAC address of the next hop for a mesh path. 1704 * @NL80211_ATTR_MPATH_INFO: information about a mesh_path, part of mesh path 1705 * info given for %NL80211_CMD_GET_MPATH, nested attribute described at 1706 * &enum nl80211_mpath_info. 1707 * 1708 * @NL80211_ATTR_MNTR_FLAGS: flags, nested element with NLA_FLAG attributes of 1709 * &enum nl80211_mntr_flags. 1710 * 1711 * @NL80211_ATTR_REG_ALPHA2: an ISO-3166-alpha2 country code for which the 1712 * current regulatory domain should be set to or is already set to. 1713 * For example, 'CR', for Costa Rica. This attribute is used by the kernel 1714 * to query the CRDA to retrieve one regulatory domain. This attribute can 1715 * also be used by userspace to query the kernel for the currently set 1716 * regulatory domain. We chose an alpha2 as that is also used by the 1717 * IEEE-802.11 country information element to identify a country. 1718 * Users can also simply ask the wireless core to set regulatory domain 1719 * to a specific alpha2. 1720 * @NL80211_ATTR_REG_RULES: a nested array of regulatory domain regulatory 1721 * rules. 1722 * 1723 * @NL80211_ATTR_BSS_CTS_PROT: whether CTS protection is enabled (u8, 0 or 1) 1724 * @NL80211_ATTR_BSS_SHORT_PREAMBLE: whether short preamble is enabled 1725 * (u8, 0 or 1) 1726 * @NL80211_ATTR_BSS_SHORT_SLOT_TIME: whether short slot time enabled 1727 * (u8, 0 or 1) 1728 * @NL80211_ATTR_BSS_BASIC_RATES: basic rates, array of basic 1729 * rates in format defined by IEEE 802.11 7.3.2.2 but without the length 1730 * restriction (at most %NL80211_MAX_SUPP_RATES). 1731 * 1732 * @NL80211_ATTR_HT_CAPABILITY: HT Capability information element (from 1733 * association request when used with NL80211_CMD_NEW_STATION) 1734 * 1735 * @NL80211_ATTR_SUPPORTED_IFTYPES: nested attribute containing all 1736 * supported interface types, each a flag attribute with the number 1737 * of the interface mode. 1738 * 1739 * @NL80211_ATTR_MGMT_SUBTYPE: Management frame subtype for 1740 * %NL80211_CMD_SET_MGMT_EXTRA_IE. 1741 * 1742 * @NL80211_ATTR_IE: Information element(s) data (used, e.g., with 1743 * %NL80211_CMD_SET_MGMT_EXTRA_IE). 1744 * 1745 * @NL80211_ATTR_MAX_NUM_SCAN_SSIDS: number of SSIDs you can scan with 1746 * a single scan request, a wiphy attribute. 1747 * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS: number of SSIDs you can 1748 * scan with a single scheduled scan request, a wiphy attribute. 1749 * @NL80211_ATTR_MAX_SCAN_IE_LEN: maximum length of information elements 1750 * that can be added to a scan request 1751 * @NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN: maximum length of information 1752 * elements that can be added to a scheduled scan request 1753 * @NL80211_ATTR_MAX_MATCH_SETS: maximum number of sets that can be 1754 * used with @NL80211_ATTR_SCHED_SCAN_MATCH, a wiphy attribute. 1755 * 1756 * @NL80211_ATTR_SCAN_FREQUENCIES: nested attribute with frequencies (in MHz) 1757 * @NL80211_ATTR_SCAN_SSIDS: nested attribute with SSIDs, leave out for passive 1758 * scanning and include a zero-length SSID (wildcard) for wildcard scan 1759 * @NL80211_ATTR_BSS: scan result BSS 1760 * 1761 * @NL80211_ATTR_REG_INITIATOR: indicates who requested the regulatory domain 1762 * currently in effect. This could be any of the %NL80211_REGDOM_SET_BY_* 1763 * @NL80211_ATTR_REG_TYPE: indicates the type of the regulatory domain currently 1764 * set. This can be one of the nl80211_reg_type (%NL80211_REGDOM_TYPE_*) 1765 * 1766 * @NL80211_ATTR_SUPPORTED_COMMANDS: wiphy attribute that specifies 1767 * an array of command numbers (i.e. a mapping index to command number) 1768 * that the driver for the given wiphy supports. 1769 * 1770 * @NL80211_ATTR_FRAME: frame data (binary attribute), including frame header 1771 * and body, but not FCS; used, e.g., with NL80211_CMD_AUTHENTICATE and 1772 * NL80211_CMD_ASSOCIATE events 1773 * @NL80211_ATTR_SSID: SSID (binary attribute, 0..32 octets) 1774 * @NL80211_ATTR_AUTH_TYPE: AuthenticationType, see &enum nl80211_auth_type, 1775 * represented as a u32 1776 * @NL80211_ATTR_REASON_CODE: ReasonCode for %NL80211_CMD_DEAUTHENTICATE and 1777 * %NL80211_CMD_DISASSOCIATE, u16 1778 * 1779 * @NL80211_ATTR_KEY_TYPE: Key Type, see &enum nl80211_key_type, represented as 1780 * a u32 1781 * 1782 * @NL80211_ATTR_FREQ_BEFORE: A channel which has suffered a regulatory change 1783 * due to considerations from a beacon hint. This attribute reflects 1784 * the state of the channel _before_ the beacon hint processing. This 1785 * attributes consists of a nested attribute containing 1786 * NL80211_FREQUENCY_ATTR_* 1787 * @NL80211_ATTR_FREQ_AFTER: A channel which has suffered a regulatory change 1788 * due to considerations from a beacon hint. This attribute reflects 1789 * the state of the channel _after_ the beacon hint processing. This 1790 * attributes consists of a nested attribute containing 1791 * NL80211_FREQUENCY_ATTR_* 1792 * 1793 * @NL80211_ATTR_CIPHER_SUITES: a set of u32 values indicating the supported 1794 * cipher suites 1795 * 1796 * @NL80211_ATTR_FREQ_FIXED: a flag indicating the IBSS should not try to look 1797 * for other networks on different channels 1798 * 1799 * @NL80211_ATTR_TIMED_OUT: a flag indicating than an operation timed out; this 1800 * is used, e.g., with %NL80211_CMD_AUTHENTICATE event 1801 * 1802 * @NL80211_ATTR_USE_MFP: Whether management frame protection (IEEE 802.11w) is 1803 * used for the association (&enum nl80211_mfp, represented as a u32); 1804 * this attribute can be used with %NL80211_CMD_ASSOCIATE and 1805 * %NL80211_CMD_CONNECT requests. %NL80211_MFP_OPTIONAL is not allowed for 1806 * %NL80211_CMD_ASSOCIATE since user space SME is expected and hence, it 1807 * must have decided whether to use management frame protection or not. 1808 * Setting %NL80211_MFP_OPTIONAL with a %NL80211_CMD_CONNECT request will 1809 * let the driver (or the firmware) decide whether to use MFP or not. 1810 * 1811 * @NL80211_ATTR_STA_FLAGS2: Attribute containing a 1812 * &struct nl80211_sta_flag_update. 1813 * 1814 * @NL80211_ATTR_CONTROL_PORT: A flag indicating whether user space controls 1815 * IEEE 802.1X port, i.e., sets/clears %NL80211_STA_FLAG_AUTHORIZED, in 1816 * station mode. If the flag is included in %NL80211_CMD_ASSOCIATE 1817 * request, the driver will assume that the port is unauthorized until 1818 * authorized by user space. Otherwise, port is marked authorized by 1819 * default in station mode. 1820 * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the 1821 * ethertype that will be used for key negotiation. It can be 1822 * specified with the associate and connect commands. If it is not 1823 * specified, the value defaults to 0x888E (PAE, 802.1X). This 1824 * attribute is also used as a flag in the wiphy information to 1825 * indicate that protocols other than PAE are supported. 1826 * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with 1827 * %NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom 1828 * ethertype frames used for key negotiation must not be encrypted. 1829 * @NL80211_ATTR_CONTROL_PORT_OVER_NL80211: A flag indicating whether control 1830 * port frames (e.g. of type given in %NL80211_ATTR_CONTROL_PORT_ETHERTYPE) 1831 * will be sent directly to the network interface or sent via the NL80211 1832 * socket. If this attribute is missing, then legacy behavior of sending 1833 * control port frames directly to the network interface is used. If the 1834 * flag is included, then control port frames are sent over NL80211 instead 1835 * using %CMD_CONTROL_PORT_FRAME. If control port routing over NL80211 is 1836 * to be used then userspace must also use the %NL80211_ATTR_SOCKET_OWNER 1837 * flag. When used with %NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, pre-auth 1838 * frames are not forwared over the control port. 1839 * 1840 * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver. 1841 * We recommend using nested, driver-specific attributes within this. 1842 * 1843 * @NL80211_ATTR_DISCONNECTED_BY_AP: A flag indicating that the DISCONNECT 1844 * event was due to the AP disconnecting the station, and not due to 1845 * a local disconnect request. 1846 * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT 1847 * event (u16) 1848 * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating 1849 * that protected APs should be used. This is also used with NEW_BEACON to 1850 * indicate that the BSS is to use protection. 1851 * 1852 * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON 1853 * to indicate which unicast key ciphers will be used with the connection 1854 * (an array of u32). 1855 * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 1856 * indicate which group key cipher will be used with the connection (a 1857 * u32). 1858 * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 1859 * indicate which WPA version(s) the AP we want to associate with is using 1860 * (a u32 with flags from &enum nl80211_wpa_versions). 1861 * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to 1862 * indicate which key management algorithm(s) to use (an array of u32). 1863 * This attribute is also sent in response to @NL80211_CMD_GET_WIPHY, 1864 * indicating the supported AKM suites, intended for specific drivers which 1865 * implement SME and have constraints on which AKMs are supported and also 1866 * the cases where an AKM support is offloaded to the driver/firmware. 1867 * If there is no such notification from the driver, user space should 1868 * assume the driver supports all the AKM suites. 1869 * 1870 * @NL80211_ATTR_REQ_IE: (Re)association request information elements as 1871 * sent out by the card, for ROAM and successful CONNECT events. 1872 * @NL80211_ATTR_RESP_IE: (Re)association response information elements as 1873 * sent by peer, for ROAM and successful CONNECT events. 1874 * 1875 * @NL80211_ATTR_PREV_BSSID: previous BSSID, to be used in ASSOCIATE and CONNECT 1876 * commands to specify a request to reassociate within an ESS, i.e., to use 1877 * Reassociate Request frame (with the value of this attribute in the 1878 * Current AP address field) instead of Association Request frame which is 1879 * used for the initial association to an ESS. 1880 * 1881 * @NL80211_ATTR_KEY: key information in a nested attribute with 1882 * %NL80211_KEY_* sub-attributes 1883 * @NL80211_ATTR_KEYS: array of keys for static WEP keys for connect() 1884 * and join_ibss(), key information is in a nested attribute each 1885 * with %NL80211_KEY_* sub-attributes 1886 * 1887 * @NL80211_ATTR_PID: Process ID of a network namespace. 1888 * 1889 * @NL80211_ATTR_GENERATION: Used to indicate consistent snapshots for 1890 * dumps. This number increases whenever the object list being 1891 * dumped changes, and as such userspace can verify that it has 1892 * obtained a complete and consistent snapshot by verifying that 1893 * all dump messages contain the same generation number. If it 1894 * changed then the list changed and the dump should be repeated 1895 * completely from scratch. 1896 * 1897 * @NL80211_ATTR_4ADDR: Use 4-address frames on a virtual interface 1898 * 1899 * @NL80211_ATTR_SURVEY_INFO: survey information about a channel, part of 1900 * the survey response for %NL80211_CMD_GET_SURVEY, nested attribute 1901 * containing info as possible, see &enum survey_info. 1902 * 1903 * @NL80211_ATTR_PMKID: PMK material for PMKSA caching. 1904 * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can 1905 * cache, a wiphy attribute. 1906 * 1907 * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32. 1908 * @NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION: Device attribute that 1909 * specifies the maximum duration that can be requested with the 1910 * remain-on-channel operation, in milliseconds, u32. 1911 * 1912 * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects. 1913 * 1914 * @NL80211_ATTR_TX_RATES: Nested set of attributes 1915 * (enum nl80211_tx_rate_attributes) describing TX rates per band. The 1916 * enum nl80211_band value is used as the index (nla_type() of the nested 1917 * data. If a band is not included, it will be configured to allow all 1918 * rates based on negotiated supported rates information. This attribute 1919 * is used with %NL80211_CMD_SET_TX_BITRATE_MASK and with starting AP, 1920 * and joining mesh networks (not IBSS yet). In the later case, it must 1921 * specify just a single bitrate, which is to be used for the beacon. 1922 * The driver must also specify support for this with the extended 1923 * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, 1924 * NL80211_EXT_FEATURE_BEACON_RATE_HT, 1925 * NL80211_EXT_FEATURE_BEACON_RATE_VHT and 1926 * NL80211_EXT_FEATURE_BEACON_RATE_HE. 1927 * 1928 * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain 1929 * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. 1930 * @NL80211_ATTR_FRAME_TYPE: A u16 indicating the frame type/subtype for the 1931 * @NL80211_CMD_REGISTER_FRAME command. 1932 * @NL80211_ATTR_TX_FRAME_TYPES: wiphy capability attribute, which is a 1933 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing 1934 * information about which frame types can be transmitted with 1935 * %NL80211_CMD_FRAME. 1936 * @NL80211_ATTR_RX_FRAME_TYPES: wiphy capability attribute, which is a 1937 * nested attribute of %NL80211_ATTR_FRAME_TYPE attributes, containing 1938 * information about which frame types can be registered for RX. 1939 * 1940 * @NL80211_ATTR_ACK: Flag attribute indicating that the frame was 1941 * acknowledged by the recipient. 1942 * 1943 * @NL80211_ATTR_PS_STATE: powersave state, using &enum nl80211_ps_state values. 1944 * 1945 * @NL80211_ATTR_CQM: connection quality monitor configuration in a 1946 * nested attribute with %NL80211_ATTR_CQM_* sub-attributes. 1947 * 1948 * @NL80211_ATTR_LOCAL_STATE_CHANGE: Flag attribute to indicate that a command 1949 * is requesting a local authentication/association state change without 1950 * invoking actual management frame exchange. This can be used with 1951 * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, 1952 * NL80211_CMD_DISASSOCIATE. 1953 * 1954 * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations 1955 * connected to this BSS. 1956 * 1957 * @NL80211_ATTR_WIPHY_TX_POWER_SETTING: Transmit power setting type. See 1958 * &enum nl80211_tx_power_setting for possible values. 1959 * @NL80211_ATTR_WIPHY_TX_POWER_LEVEL: Transmit power level in signed mBm units. 1960 * This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING 1961 * for non-automatic settings. 1962 * 1963 * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly 1964 * means support for per-station GTKs. 1965 * 1966 * @NL80211_ATTR_WIPHY_ANTENNA_TX: Bitmap of allowed antennas for transmitting. 1967 * This can be used to mask out antennas which are not attached or should 1968 * not be used for transmitting. If an antenna is not selected in this 1969 * bitmap the hardware is not allowed to transmit on this antenna. 1970 * 1971 * Each bit represents one antenna, starting with antenna 1 at the first 1972 * bit. Depending on which antennas are selected in the bitmap, 802.11n 1973 * drivers can derive which chainmasks to use (if all antennas belonging to 1974 * a particular chain are disabled this chain should be disabled) and if 1975 * a chain has diversity antennas wether diversity should be used or not. 1976 * HT capabilities (STBC, TX Beamforming, Antenna selection) can be 1977 * derived from the available chains after applying the antenna mask. 1978 * Non-802.11n drivers can derive wether to use diversity or not. 1979 * Drivers may reject configurations or RX/TX mask combinations they cannot 1980 * support by returning -EINVAL. 1981 * 1982 * @NL80211_ATTR_WIPHY_ANTENNA_RX: Bitmap of allowed antennas for receiving. 1983 * This can be used to mask out antennas which are not attached or should 1984 * not be used for receiving. If an antenna is not selected in this bitmap 1985 * the hardware should not be configured to receive on this antenna. 1986 * For a more detailed description see @NL80211_ATTR_WIPHY_ANTENNA_TX. 1987 * 1988 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX: Bitmap of antennas which are available 1989 * for configuration as TX antennas via the above parameters. 1990 * 1991 * @NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX: Bitmap of antennas which are available 1992 * for configuration as RX antennas via the above parameters. 1993 * 1994 * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS 1995 * 1996 * @NL80211_ATTR_OFFCHANNEL_TX_OK: For management frame TX, the frame may be 1997 * transmitted on another channel when the channel given doesn't match 1998 * the current channel. If the current channel doesn't match and this 1999 * flag isn't set, the frame will be rejected. This is also used as an 2000 * nl80211 capability flag. 2001 * 2002 * @NL80211_ATTR_BSS_HT_OPMODE: HT operation mode (u16) 2003 * 2004 * @NL80211_ATTR_KEY_DEFAULT_TYPES: A nested attribute containing flags 2005 * attributes, specifying what a key should be set as default as. 2006 * See &enum nl80211_key_default_types. 2007 * 2008 * @NL80211_ATTR_MESH_SETUP: Optional mesh setup parameters. These cannot be 2009 * changed once the mesh is active. 2010 * @NL80211_ATTR_MESH_CONFIG: Mesh configuration parameters, a nested attribute 2011 * containing attributes from &enum nl80211_meshconf_params. 2012 * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver 2013 * allows auth frames in a mesh to be passed to userspace for processing via 2014 * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. 2015 * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as defined in 2016 * &enum nl80211_plink_state. Used when userspace is driving the peer link 2017 * management state machine. @NL80211_MESH_SETUP_USERSPACE_AMPE or 2018 * @NL80211_MESH_SETUP_USERSPACE_MPM must be enabled. 2019 * 2020 * @NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED: indicates, as part of the wiphy 2021 * capabilities, the supported WoWLAN triggers 2022 * @NL80211_ATTR_WOWLAN_TRIGGERS: used by %NL80211_CMD_SET_WOWLAN to 2023 * indicate which WoW triggers should be enabled. This is also 2024 * used by %NL80211_CMD_GET_WOWLAN to get the currently enabled WoWLAN 2025 * triggers. 2026 * 2027 * @NL80211_ATTR_SCHED_SCAN_INTERVAL: Interval between scheduled scan 2028 * cycles, in msecs. 2029 * 2030 * @NL80211_ATTR_SCHED_SCAN_MATCH: Nested attribute with one or more 2031 * sets of attributes to match during scheduled scans. Only BSSs 2032 * that match any of the sets will be reported. These are 2033 * pass-thru filter rules. 2034 * For a match to succeed, the BSS must match all attributes of a 2035 * set. Since not every hardware supports matching all types of 2036 * attributes, there is no guarantee that the reported BSSs are 2037 * fully complying with the match sets and userspace needs to be 2038 * able to ignore them by itself. 2039 * Thus, the implementation is somewhat hardware-dependent, but 2040 * this is only an optimization and the userspace application 2041 * needs to handle all the non-filtered results anyway. 2042 * If the match attributes don't make sense when combined with 2043 * the values passed in @NL80211_ATTR_SCAN_SSIDS (eg. if an SSID 2044 * is included in the probe request, but the match attributes 2045 * will never let it go through), -EINVAL may be returned. 2046 * If omitted, no filtering is done. 2047 * 2048 * @NL80211_ATTR_INTERFACE_COMBINATIONS: Nested attribute listing the supported 2049 * interface combinations. In each nested item, it contains attributes 2050 * defined in &enum nl80211_if_combination_attrs. 2051 * @NL80211_ATTR_SOFTWARE_IFTYPES: Nested attribute (just like 2052 * %NL80211_ATTR_SUPPORTED_IFTYPES) containing the interface types that 2053 * are managed in software: interfaces of these types aren't subject to 2054 * any restrictions in their number or combinations. 2055 * 2056 * @NL80211_ATTR_REKEY_DATA: nested attribute containing the information 2057 * necessary for GTK rekeying in the device, see &enum nl80211_rekey_data. 2058 * 2059 * @NL80211_ATTR_SCAN_SUPP_RATES: rates per to be advertised as supported in scan, 2060 * nested array attribute containing an entry for each band, with the entry 2061 * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but 2062 * without the length restriction (at most %NL80211_MAX_SUPP_RATES). 2063 * 2064 * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon 2065 * and Probe Response (when response to wildcard Probe Request); see 2066 * &enum nl80211_hidden_ssid, represented as a u32 2067 * 2068 * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. 2069 * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to 2070 * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the 2071 * driver (or firmware) replies to Probe Request frames. 2072 * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association 2073 * Response frames. This is used with %NL80211_CMD_NEW_BEACON and 2074 * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into 2075 * (Re)Association Response frames when the driver (or firmware) replies to 2076 * (Re)Association Request frames. 2077 * 2078 * @NL80211_ATTR_STA_WME: Nested attribute containing the wme configuration 2079 * of the station, see &enum nl80211_sta_wme_attr. 2080 * @NL80211_ATTR_SUPPORT_AP_UAPSD: the device supports uapsd when working 2081 * as AP. 2082 * 2083 * @NL80211_ATTR_ROAM_SUPPORT: Indicates whether the firmware is capable of 2084 * roaming to another AP in the same ESS if the signal lever is low. 2085 * 2086 * @NL80211_ATTR_PMKSA_CANDIDATE: Nested attribute containing the PMKSA caching 2087 * candidate information, see &enum nl80211_pmksa_candidate_attr. 2088 * 2089 * @NL80211_ATTR_TX_NO_CCK_RATE: Indicates whether to use CCK rate or not 2090 * for management frames transmission. In order to avoid p2p probe/action 2091 * frames are being transmitted at CCK rate in 2GHz band, the user space 2092 * applications use this attribute. 2093 * This attribute is used with %NL80211_CMD_TRIGGER_SCAN and 2094 * %NL80211_CMD_FRAME commands. 2095 * 2096 * @NL80211_ATTR_TDLS_ACTION: Low level TDLS action code (e.g. link setup 2097 * request, link setup confirm, link teardown, etc.). Values are 2098 * described in the TDLS (802.11z) specification. 2099 * @NL80211_ATTR_TDLS_DIALOG_TOKEN: Non-zero token for uniquely identifying a 2100 * TDLS conversation between two devices. 2101 * @NL80211_ATTR_TDLS_OPERATION: High level TDLS operation; see 2102 * &enum nl80211_tdls_operation, represented as a u8. 2103 * @NL80211_ATTR_TDLS_SUPPORT: A flag indicating the device can operate 2104 * as a TDLS peer sta. 2105 * @NL80211_ATTR_TDLS_EXTERNAL_SETUP: The TDLS discovery/setup and teardown 2106 * procedures should be performed by sending TDLS packets via 2107 * %NL80211_CMD_TDLS_MGMT. Otherwise %NL80211_CMD_TDLS_OPER should be 2108 * used for asking the driver to perform a TDLS operation. 2109 * 2110 * @NL80211_ATTR_DEVICE_AP_SME: This u32 attribute may be listed for devices 2111 * that have AP support to indicate that they have the AP SME integrated 2112 * with support for the features listed in this attribute, see 2113 * &enum nl80211_ap_sme_features. 2114 * 2115 * @NL80211_ATTR_DONT_WAIT_FOR_ACK: Used with %NL80211_CMD_FRAME, this tells 2116 * the driver to not wait for an acknowledgement. Note that due to this, 2117 * it will also not give a status callback nor return a cookie. This is 2118 * mostly useful for probe responses to save airtime. 2119 * 2120 * @NL80211_ATTR_FEATURE_FLAGS: This u32 attribute contains flags from 2121 * &enum nl80211_feature_flags and is advertised in wiphy information. 2122 * @NL80211_ATTR_PROBE_RESP_OFFLOAD: Indicates that the HW responds to probe 2123 * requests while operating in AP-mode. 2124 * This attribute holds a bitmap of the supported protocols for 2125 * offloading (see &enum nl80211_probe_resp_offload_support_attr). 2126 * 2127 * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire 2128 * probe-response frame. The DA field in the 802.11 header is zero-ed out, 2129 * to be filled by the FW. 2130 * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable 2131 * this feature during association. This is a flag attribute. 2132 * Currently only supported in mac80211 drivers. 2133 * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable 2134 * this feature during association. This is a flag attribute. 2135 * Currently only supported in mac80211 drivers. 2136 * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable 2137 * this feature during association. This is a flag attribute. 2138 * Currently only supported in mac80211 drivers. 2139 * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the 2140 * ATTR_HT_CAPABILITY to which attention should be paid. 2141 * Currently, only mac80211 NICs support this feature. 2142 * The values that may be configured are: 2143 * MCS rates, MAX-AMSDU, HT-20-40 and HT_CAP_SGI_40 2144 * AMPDU density and AMPDU factor. 2145 * All values are treated as suggestions and may be ignored 2146 * by the driver as required. The actual values may be seen in 2147 * the station debugfs ht_caps file. 2148 * 2149 * @NL80211_ATTR_DFS_REGION: region for regulatory rules which this country 2150 * abides to when initiating radiation on DFS channels. A country maps 2151 * to one DFS region. 2152 * 2153 * @NL80211_ATTR_NOACK_MAP: This u16 bitmap contains the No Ack Policy of 2154 * up to 16 TIDs. 2155 * 2156 * @NL80211_ATTR_INACTIVITY_TIMEOUT: timeout value in seconds, this can be 2157 * used by the drivers which has MLME in firmware and does not have support 2158 * to report per station tx/rx activity to free up the station entry from 2159 * the list. This needs to be used when the driver advertises the 2160 * capability to timeout the stations. 2161 * 2162 * @NL80211_ATTR_RX_SIGNAL_DBM: signal strength in dBm (as a 32-bit int); 2163 * this attribute is (depending on the driver capabilities) added to 2164 * received frames indicated with %NL80211_CMD_FRAME. 2165 * 2166 * @NL80211_ATTR_BG_SCAN_PERIOD: Background scan period in seconds 2167 * or 0 to disable background scan. 2168 * 2169 * @NL80211_ATTR_USER_REG_HINT_TYPE: type of regulatory hint passed from 2170 * userspace. If unset it is assumed the hint comes directly from 2171 * a user. If set code could specify exactly what type of source 2172 * was used to provide the hint. For the different types of 2173 * allowed user regulatory hints see nl80211_user_reg_hint_type. 2174 * 2175 * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected 2176 * the connection request from a station. nl80211_connect_failed_reason 2177 * enum has different reasons of connection failure. 2178 * 2179 * @NL80211_ATTR_AUTH_DATA: Fields and elements in Authentication frames. 2180 * This contains the authentication frame body (non-IE and IE data), 2181 * excluding the Authentication algorithm number, i.e., starting at the 2182 * Authentication transaction sequence number field. It is used with 2183 * authentication algorithms that need special fields to be added into 2184 * the frames (SAE and FILS). Currently, only the SAE cases use the 2185 * initial two fields (Authentication transaction sequence number and 2186 * Status code). However, those fields are included in the attribute data 2187 * for all authentication algorithms to keep the attribute definition 2188 * consistent. 2189 * 2190 * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from 2191 * association request when used with NL80211_CMD_NEW_STATION) 2192 * 2193 * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) 2194 * 2195 * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with 2196 * the START_AP and SET_BSS commands 2197 * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the 2198 * START_AP and SET_BSS commands. This can have the values 0 or 1; 2199 * if not given in START_AP 0 is assumed, if not given in SET_BSS 2200 * no change is made. 2201 * 2202 * @NL80211_ATTR_LOCAL_MESH_POWER_MODE: local mesh STA link-specific power mode 2203 * defined in &enum nl80211_mesh_power_mode. 2204 * 2205 * @NL80211_ATTR_ACL_POLICY: ACL policy, see &enum nl80211_acl_policy, 2206 * carried in a u32 attribute 2207 * 2208 * @NL80211_ATTR_MAC_ADDRS: Array of nested MAC addresses, used for 2209 * MAC ACL. 2210 * 2211 * @NL80211_ATTR_MAC_ACL_MAX: u32 attribute to advertise the maximum 2212 * number of MAC addresses that a device can support for MAC 2213 * ACL. 2214 * 2215 * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, 2216 * contains a value of enum nl80211_radar_event (u32). 2217 * 2218 * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver 2219 * has and handles. The format is the same as the IE contents. See 2220 * 802.11-2012 8.4.2.29 for more information. 2221 * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver 2222 * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. 2223 * 2224 * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to 2225 * the driver, e.g., to enable TDLS power save (PU-APSD). 2226 * 2227 * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are 2228 * advertised to the driver, e.g., to enable TDLS off channel operations 2229 * and PU-APSD. 2230 * 2231 * @NL80211_ATTR_PROTOCOL_FEATURES: global nl80211 feature flags, see 2232 * &enum nl80211_protocol_features, the attribute is a u32. 2233 * 2234 * @NL80211_ATTR_SPLIT_WIPHY_DUMP: flag attribute, userspace supports 2235 * receiving the data for a single wiphy split across multiple 2236 * messages, given with wiphy dump message 2237 * 2238 * @NL80211_ATTR_MDID: Mobility Domain Identifier 2239 * 2240 * @NL80211_ATTR_IE_RIC: Resource Information Container Information 2241 * Element 2242 * 2243 * @NL80211_ATTR_CRIT_PROT_ID: critical protocol identifier requiring increased 2244 * reliability, see &enum nl80211_crit_proto_id (u16). 2245 * @NL80211_ATTR_MAX_CRIT_PROT_DURATION: duration in milliseconds in which 2246 * the connection should have increased reliability (u16). 2247 * 2248 * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). 2249 * This is similar to @NL80211_ATTR_STA_AID but with a difference of being 2250 * allowed to be used with the first @NL80211_CMD_SET_STATION command to 2251 * update a TDLS peer STA entry. 2252 * 2253 * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. 2254 * 2255 * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's 2256 * until the channel switch event. 2257 * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission 2258 * must be blocked on the current channel (before the channel switch 2259 * operation). Also included in the channel switch started event if quiet 2260 * was requested by the AP. 2261 * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information 2262 * for the time while performing a channel switch. 2263 * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel 2264 * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). 2265 * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel 2266 * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP). 2267 * 2268 * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. 2269 * As specified in the &enum nl80211_rxmgmt_flags. 2270 * 2271 * @NL80211_ATTR_STA_SUPPORTED_CHANNELS: array of supported channels. 2272 * 2273 * @NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES: array of supported 2274 * operating classes. 2275 * 2276 * @NL80211_ATTR_HANDLE_DFS: A flag indicating whether user space 2277 * controls DFS operation in IBSS mode. If the flag is included in 2278 * %NL80211_CMD_JOIN_IBSS request, the driver will allow use of DFS 2279 * channels and reports radar events to userspace. Userspace is required 2280 * to react to radar events, e.g. initiate a channel switch or leave the 2281 * IBSS network. 2282 * 2283 * @NL80211_ATTR_SUPPORT_5_MHZ: A flag indicating that the device supports 2284 * 5 MHz channel bandwidth. 2285 * @NL80211_ATTR_SUPPORT_10_MHZ: A flag indicating that the device supports 2286 * 10 MHz channel bandwidth. 2287 * 2288 * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode 2289 * Notification Element based on association request when used with 2290 * %NL80211_CMD_NEW_STATION or %NL80211_CMD_SET_STATION (only when 2291 * %NL80211_FEATURE_FULL_AP_CLIENT_STATE is supported, or with TDLS); 2292 * u8 attribute. 2293 * 2294 * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if 2295 * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) 2296 * @NL80211_ATTR_VENDOR_SUBCMD: vendor sub-command 2297 * @NL80211_ATTR_VENDOR_DATA: data for the vendor command, if any; this 2298 * attribute is also used for vendor command feature advertisement 2299 * @NL80211_ATTR_VENDOR_EVENTS: used for event list advertising in the wiphy 2300 * info, containing a nested array of possible events 2301 * 2302 * @NL80211_ATTR_QOS_MAP: IP DSCP mapping for Interworking QoS mapping. This 2303 * data is in the format defined for the payload of the QoS Map Set element 2304 * in IEEE Std 802.11-2012, 8.4.2.97. 2305 * 2306 * @NL80211_ATTR_MAC_HINT: MAC address recommendation as initial BSS 2307 * @NL80211_ATTR_WIPHY_FREQ_HINT: frequency of the recommended initial BSS 2308 * 2309 * @NL80211_ATTR_MAX_AP_ASSOC_STA: Device attribute that indicates how many 2310 * associated stations are supported in AP mode (including P2P GO); u32. 2311 * Since drivers may not have a fixed limit on the maximum number (e.g., 2312 * other concurrent operations may affect this), drivers are allowed to 2313 * advertise values that cannot always be met. In such cases, an attempt 2314 * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. 2315 * 2316 * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which 2317 * should be updated when the frame is transmitted. 2318 * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum 2319 * supported number of csa counters. 2320 * 2321 * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. 2322 * As specified in the &enum nl80211_tdls_peer_capability. 2323 * 2324 * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface 2325 * creation then the new interface will be owned by the netlink socket 2326 * that created it and will be destroyed when the socket is closed. 2327 * If set during scheduled scan start then the new scan req will be 2328 * owned by the netlink socket that created it and the scheduled scan will 2329 * be stopped when the socket is closed. 2330 * If set during configuration of regulatory indoor operation then the 2331 * regulatory indoor configuration would be owned by the netlink socket 2332 * that configured the indoor setting, and the indoor operation would be 2333 * cleared when the socket is closed. 2334 * If set during NAN interface creation, the interface will be destroyed 2335 * if the socket is closed just like any other interface. Moreover, NAN 2336 * notifications will be sent in unicast to that socket. Without this 2337 * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN 2338 * multicast group. 2339 * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the 2340 * station will deauthenticate when the socket is closed. 2341 * If set during %NL80211_CMD_JOIN_IBSS the IBSS will be automatically 2342 * torn down when the socket is closed. 2343 * If set during %NL80211_CMD_JOIN_MESH the mesh setup will be 2344 * automatically torn down when the socket is closed. 2345 * If set during %NL80211_CMD_START_AP the AP will be automatically 2346 * disabled when the socket is closed. 2347 * 2348 * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is 2349 * the TDLS link initiator. 2350 * 2351 * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection 2352 * shall support Radio Resource Measurements (11k). This attribute can be 2353 * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. 2354 * User space applications are expected to use this flag only if the 2355 * underlying device supports these minimal RRM features: 2356 * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, 2357 * %NL80211_FEATURE_QUIET, 2358 * Or, if global RRM is supported, see: 2359 * %NL80211_EXT_FEATURE_RRM 2360 * If this flag is used, driver must add the Power Capabilities IE to the 2361 * association request. In addition, it must also set the RRM capability 2362 * flag in the association request's Capability Info field. 2363 * 2364 * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout 2365 * estimation algorithm (dynack). In order to activate dynack 2366 * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower 2367 * drivers to indicate dynack capability. Dynack is automatically disabled 2368 * setting valid value for coverage class. 2369 * 2370 * @NL80211_ATTR_TSID: a TSID value (u8 attribute) 2371 * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) 2372 * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds 2373 * (per second) (u16 attribute) 2374 * 2375 * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see 2376 * &enum nl80211_smps_mode. 2377 * 2378 * @NL80211_ATTR_OPER_CLASS: operating class 2379 * 2380 * @NL80211_ATTR_MAC_MASK: MAC address mask 2381 * 2382 * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device 2383 * is self-managing its regulatory information and any regulatory domain 2384 * obtained from it is coming from the device's wiphy and not the global 2385 * cfg80211 regdomain. 2386 * 2387 * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte 2388 * array. The feature flags are identified by their bit index (see &enum 2389 * nl80211_ext_feature_index). The bit index is ordered starting at the 2390 * least-significant bit of the first byte in the array, ie. bit index 0 2391 * is located at bit 0 of byte 0. bit index 25 would be located at bit 1 2392 * of byte 3 (u8 array). 2393 * 2394 * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be 2395 * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY 2396 * may return a survey entry without a channel indicating global radio 2397 * statistics (only some values are valid and make sense.) 2398 * For devices that don't return such an entry even then, the information 2399 * should be contained in the result as the sum of the respective counters 2400 * over all channels. 2401 * 2402 * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before the first cycle of a 2403 * scheduled scan is started. Or the delay before a WoWLAN 2404 * net-detect scan is started, counting from the moment the 2405 * system is suspended. This value is a u32, in seconds. 2406 2407 * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device 2408 * is operating in an indoor environment. 2409 * 2410 * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for 2411 * scheduled scan supported by the device (u32), a wiphy attribute. 2412 * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for 2413 * a scan plan (u32), a wiphy attribute. 2414 * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in 2415 * a scan plan (u32), a wiphy attribute. 2416 * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan. 2417 * Each scan plan defines the number of scan iterations and the interval 2418 * between scans. The last scan plan will always run infinitely, 2419 * thus it must not specify the number of iterations, only the interval 2420 * between scans. The scan plans are executed sequentially. 2421 * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. 2422 * @NL80211_ATTR_PBSS: flag attribute. If set it means operate 2423 * in a PBSS. Specified in %NL80211_CMD_CONNECT to request 2424 * connecting to a PCP, and in %NL80211_CMD_START_AP to start 2425 * a PCP instead of AP. Relevant for DMG networks only. 2426 * @NL80211_ATTR_BSS_SELECT: nested attribute for driver supporting the 2427 * BSS selection feature. When used with %NL80211_CMD_GET_WIPHY it contains 2428 * attributes according &enum nl80211_bss_select_attr to indicate what 2429 * BSS selection behaviours are supported. When used with %NL80211_CMD_CONNECT 2430 * it contains the behaviour-specific attribute containing the parameters for 2431 * BSS selection to be done by driver and/or firmware. 2432 * 2433 * @NL80211_ATTR_STA_SUPPORT_P2P_PS: whether P2P PS mechanism supported 2434 * or not. u8, one of the values of &enum nl80211_sta_p2p_ps_status 2435 * 2436 * @NL80211_ATTR_PAD: attribute used for padding for 64-bit alignment 2437 * 2438 * @NL80211_ATTR_IFTYPE_EXT_CAPA: Nested attribute of the following attributes: 2439 * %NL80211_ATTR_IFTYPE, %NL80211_ATTR_EXT_CAPA, 2440 * %NL80211_ATTR_EXT_CAPA_MASK, to specify the extended capabilities and 2441 * other interface-type specific capabilities per interface type. For MLO, 2442 * %NL80211_ATTR_EML_CAPABILITY and %NL80211_ATTR_MLD_CAPA_AND_OPS are 2443 * present. 2444 * 2445 * @NL80211_ATTR_MU_MIMO_GROUP_DATA: array of 24 bytes that defines a MU-MIMO 2446 * groupID for monitor mode. 2447 * The first 8 bytes are a mask that defines the membership in each 2448 * group (there are 64 groups, group 0 and 63 are reserved), 2449 * each bit represents a group and set to 1 for being a member in 2450 * that group and 0 for not being a member. 2451 * The remaining 16 bytes define the position in each group: 2 bits for 2452 * each group. 2453 * (smaller group numbers represented on most significant bits and bigger 2454 * group numbers on least significant bits.) 2455 * This attribute is used only if all interfaces are in monitor mode. 2456 * Set this attribute in order to monitor packets using the given MU-MIMO 2457 * groupID data. 2458 * to turn off that feature set all the bits of the groupID to zero. 2459 * @NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR: mac address for the sniffer to follow 2460 * when using MU-MIMO air sniffer. 2461 * to turn that feature off set an invalid mac address 2462 * (e.g. FF:FF:FF:FF:FF:FF) 2463 * 2464 * @NL80211_ATTR_SCAN_START_TIME_TSF: The time at which the scan was actually 2465 * started (u64). The time is the TSF of the BSS the interface that 2466 * requested the scan is connected to (if available, otherwise this 2467 * attribute must not be included). 2468 * @NL80211_ATTR_SCAN_START_TIME_TSF_BSSID: The BSS according to which 2469 * %NL80211_ATTR_SCAN_START_TIME_TSF is set. 2470 * @NL80211_ATTR_MEASUREMENT_DURATION: measurement duration in TUs (u16). If 2471 * %NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY is not set, this is the 2472 * maximum measurement duration allowed. This attribute is used with 2473 * measurement requests. It can also be used with %NL80211_CMD_TRIGGER_SCAN 2474 * if the scan is used for beacon report radio measurement. 2475 * @NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY: flag attribute that indicates 2476 * that the duration specified with %NL80211_ATTR_MEASUREMENT_DURATION is 2477 * mandatory. If this flag is not set, the duration is the maximum duration 2478 * and the actual measurement duration may be shorter. 2479 * 2480 * @NL80211_ATTR_MESH_PEER_AID: Association ID for the mesh peer (u16). This is 2481 * used to pull the stored data for mesh peer in power save state. 2482 * 2483 * @NL80211_ATTR_NAN_MASTER_PREF: the master preference to be used by 2484 * %NL80211_CMD_START_NAN and optionally with 2485 * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. 2486 * Also, values 1 and 255 are reserved for certification purposes and 2487 * should not be used during a normal device operation. 2488 * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32 2489 * bitmask of BIT(NL80211_BAND_*) as described in %enum 2490 * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0 2491 * would be set. This attribute is used with 2492 * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and 2493 * it is optional. If no bands are set, it means don't-care and 2494 * the device will decide what to use. 2495 * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See 2496 * &enum nl80211_nan_func_attributes for description of this nested 2497 * attribute. 2498 * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. 2499 * See &enum nl80211_nan_match_attributes. 2500 * @NL80211_ATTR_FILS_KEK: KEK for FILS (Re)Association Request/Response frame 2501 * protection. 2502 * @NL80211_ATTR_FILS_NONCES: Nonces (part of AAD) for FILS (Re)Association 2503 * Request/Response frame protection. This attribute contains the 16 octet 2504 * STA Nonce followed by 16 octets of AP Nonce. 2505 * 2506 * @NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED: Indicates whether or not multicast 2507 * packets should be send out as unicast to all stations (flag attribute). 2508 * 2509 * @NL80211_ATTR_BSSID: The BSSID of the AP. Note that %NL80211_ATTR_MAC is also 2510 * used in various commands/events for specifying the BSSID. 2511 * 2512 * @NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI: Relative RSSI threshold by which 2513 * other BSSs has to be better or slightly worse than the current 2514 * connected BSS so that they get reported to user space. 2515 * This will give an opportunity to userspace to consider connecting to 2516 * other matching BSSs which have better or slightly worse RSSI than 2517 * the current connected BSS by using an offloaded operation to avoid 2518 * unnecessary wakeups. 2519 * 2520 * @NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST: When present the RSSI level for BSSs in 2521 * the specified band is to be adjusted before doing 2522 * %NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI based comparison to figure out 2523 * better BSSs. The attribute value is a packed structure 2524 * value as specified by &struct nl80211_bss_select_rssi_adjust. 2525 * 2526 * @NL80211_ATTR_TIMEOUT_REASON: The reason for which an operation timed out. 2527 * u32 attribute with an &enum nl80211_timeout_reason value. This is used, 2528 * e.g., with %NL80211_CMD_CONNECT event. 2529 * 2530 * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP) 2531 * username part of NAI used to refer keys rRK and rIK. This is used with 2532 * %NL80211_CMD_CONNECT. 2533 * 2534 * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part 2535 * of NAI specifying the domain name of the ER server. This is used with 2536 * %NL80211_CMD_CONNECT. 2537 * 2538 * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number 2539 * to use in ERP messages. This is used in generating the FILS wrapped data 2540 * for FILS authentication and is used with %NL80211_CMD_CONNECT. 2541 * 2542 * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the 2543 * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and 2544 * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK 2545 * from successful FILS authentication and is used with 2546 * %NL80211_CMD_CONNECT. 2547 * 2548 * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP 2549 * identifying the scope of PMKSAs. This is used with 2550 * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. 2551 * 2552 * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with 2553 * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID. 2554 * For %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP it is used to provide 2555 * PSK for offloading 4-way handshake for WPA/WPA2-PSK networks. For 802.1X 2556 * authentication it is used with %NL80211_CMD_SET_PMK. For offloaded FT 2557 * support this attribute specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME 2558 * is included as well. 2559 * 2560 * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to 2561 * indicate that it supports multiple active scheduled scan requests. 2562 * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled 2563 * scan request that may be active for the device (u32). 2564 * 2565 * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include 2566 * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it 2567 * wants to use the supported offload of the 4-way handshake. 2568 * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. 2569 * @NL80211_ATTR_PORT_AUTHORIZED: (reserved) 2570 * 2571 * @NL80211_ATTR_EXTERNAL_AUTH_ACTION: Identify the requested external 2572 * authentication operation (u32 attribute with an 2573 * &enum nl80211_external_auth_action value). This is used with the 2574 * %NL80211_CMD_EXTERNAL_AUTH request event. 2575 * @NL80211_ATTR_EXTERNAL_AUTH_SUPPORT: Flag attribute indicating that the user 2576 * space supports external authentication. This attribute shall be used 2577 * with %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP request. The driver 2578 * may offload authentication processing to user space if this capability 2579 * is indicated in the respective requests from the user space. (This flag 2580 * attribute deprecated for %NL80211_CMD_START_AP, use 2581 * %NL80211_ATTR_AP_SETTINGS_FLAGS) 2582 * 2583 * @NL80211_ATTR_NSS: Station's New/updated RX_NSS value notified using this 2584 * u8 attribute. This is used with %NL80211_CMD_STA_OPMODE_CHANGED. 2585 * 2586 * @NL80211_ATTR_TXQ_STATS: TXQ statistics (nested attribute, see &enum 2587 * nl80211_txq_stats) 2588 * @NL80211_ATTR_TXQ_LIMIT: Total packet limit for the TXQ queues for this phy. 2589 * The smaller of this and the memory limit is enforced. 2590 * @NL80211_ATTR_TXQ_MEMORY_LIMIT: Total memory limit (in bytes) for the 2591 * TXQ queues for this phy. The smaller of this and the packet limit is 2592 * enforced. 2593 * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes 2594 * a flow is assigned on each round of the DRR scheduler. 2595 * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from 2596 * association request when used with NL80211_CMD_NEW_STATION). Can be set 2597 * only if %NL80211_STA_FLAG_WME is set. 2598 * 2599 * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include 2600 * in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing 2601 * measurement (FTM) responder functionality and containing parameters as 2602 * possible, see &enum nl80211_ftm_responder_attr 2603 * 2604 * @NL80211_ATTR_FTM_RESPONDER_STATS: Nested attribute with FTM responder 2605 * statistics, see &enum nl80211_ftm_responder_stats. 2606 * 2607 * @NL80211_ATTR_TIMEOUT: Timeout for the given operation in milliseconds (u32), 2608 * if the attribute is not given no timeout is requested. Note that 0 is an 2609 * invalid value. 2610 * 2611 * @NL80211_ATTR_PEER_MEASUREMENTS: peer measurements request (and result) 2612 * data, uses nested attributes specified in 2613 * &enum nl80211_peer_measurement_attrs. 2614 * This is also used for capability advertisement in the wiphy information, 2615 * with the appropriate sub-attributes. 2616 * 2617 * @NL80211_ATTR_AIRTIME_WEIGHT: Station's weight when scheduled by the airtime 2618 * scheduler. 2619 * 2620 * @NL80211_ATTR_STA_TX_POWER_SETTING: Transmit power setting type (u8) for 2621 * station associated with the AP. See &enum nl80211_tx_power_setting for 2622 * possible values. 2623 * @NL80211_ATTR_STA_TX_POWER: Transmit power level (s16) in dBm units. This 2624 * allows to set Tx power for a station. If this attribute is not included, 2625 * the default per-interface tx power setting will be overriding. Driver 2626 * should be picking up the lowest tx power, either tx power per-interface 2627 * or per-station. 2628 * 2629 * @NL80211_ATTR_SAE_PASSWORD: attribute for passing SAE password material. It 2630 * is used with %NL80211_CMD_CONNECT to provide password for offloading 2631 * SAE authentication for WPA3-Personal networks. 2632 * 2633 * @NL80211_ATTR_TWT_RESPONDER: Enable target wait time responder support. 2634 * 2635 * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection 2636 * functionality. 2637 * 2638 * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz 2639 * channel(s) that are allowed to be used for EDMG transmissions. 2640 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute) 2641 * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes 2642 * the allowed channel bandwidth configurations. (u8 attribute) 2643 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. 2644 * 2645 * @NL80211_ATTR_VLAN_ID: VLAN ID (1..4094) for the station and VLAN group key 2646 * (u16). 2647 * 2648 * @NL80211_ATTR_HE_BSS_COLOR: nested attribute for BSS Color Settings. 2649 * 2650 * @NL80211_ATTR_IFTYPE_AKM_SUITES: nested array attribute, with each entry 2651 * using attributes from &enum nl80211_iftype_akm_attributes. This 2652 * attribute is sent in a response to %NL80211_CMD_GET_WIPHY indicating 2653 * supported AKM suites capability per interface. AKMs advertised in 2654 * %NL80211_ATTR_AKM_SUITES are default capabilities if AKM suites not 2655 * advertised for a specific interface type. 2656 * 2657 * @NL80211_ATTR_TID_CONFIG: TID specific configuration in a 2658 * nested attribute with &enum nl80211_tid_config_attr sub-attributes; 2659 * on output (in wiphy attributes) it contains only the feature sub- 2660 * attributes. 2661 * 2662 * @NL80211_ATTR_CONTROL_PORT_NO_PREAUTH: disable preauth frame rx on control 2663 * port in order to forward/receive them as ordinary data frames. 2664 * 2665 * @NL80211_ATTR_PMK_LIFETIME: Maximum lifetime for PMKSA in seconds (u32, 2666 * dot11RSNAConfigPMKReauthThreshold; 0 is not a valid value). 2667 * An optional parameter configured through %NL80211_CMD_SET_PMKSA. 2668 * Drivers that trigger roaming need to know the lifetime of the 2669 * configured PMKSA for triggering the full vs. PMKSA caching based 2670 * authentication. This timeout helps authentication methods like SAE, 2671 * where PMK gets updated only by going through a full (new SAE) 2672 * authentication instead of getting updated during an association for EAP 2673 * authentication. No new full authentication within the PMK expiry shall 2674 * result in a disassociation at the end of the lifetime. 2675 * 2676 * @NL80211_ATTR_PMK_REAUTH_THRESHOLD: Reauthentication threshold time, in 2677 * terms of percentage of %NL80211_ATTR_PMK_LIFETIME 2678 * (u8, dot11RSNAConfigPMKReauthThreshold, 1..100). This is an optional 2679 * parameter configured through %NL80211_CMD_SET_PMKSA. Requests the 2680 * driver to trigger a full authentication roam (without PMKSA caching) 2681 * after the reauthentication threshold time, but before the PMK lifetime 2682 * has expired. 2683 * 2684 * Authentication methods like SAE need to be able to generate a new PMKSA 2685 * entry without having to force a disconnection after the PMK timeout. If 2686 * no roaming occurs between the reauth threshold and PMK expiration, 2687 * disassociation is still forced. 2688 * @NL80211_ATTR_RECEIVE_MULTICAST: multicast flag for the 2689 * %NL80211_CMD_REGISTER_FRAME command, see the description there. 2690 * @NL80211_ATTR_WIPHY_FREQ_OFFSET: offset of the associated 2691 * %NL80211_ATTR_WIPHY_FREQ in positive KHz. Only valid when supplied with 2692 * an %NL80211_ATTR_WIPHY_FREQ_OFFSET. 2693 * @NL80211_ATTR_CENTER_FREQ1_OFFSET: Center frequency offset in KHz for the 2694 * first channel segment specified in %NL80211_ATTR_CENTER_FREQ1. 2695 * @NL80211_ATTR_SCAN_FREQ_KHZ: nested attribute with KHz frequencies 2696 * 2697 * @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from 2698 * association request when used with NL80211_CMD_NEW_STATION). 2699 * 2700 * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS 2701 * discovery. It is a nested attribute, see 2702 * &enum nl80211_fils_discovery_attributes. Userspace should pass an empty 2703 * nested attribute to disable this feature and delete the templates. 2704 * 2705 * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure 2706 * unsolicited broadcast probe response. It is a nested attribute, see 2707 * &enum nl80211_unsol_bcast_probe_resp_attributes. Userspace should pass an empty 2708 * nested attribute to disable this feature and delete the templates. 2709 * 2710 * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from 2711 * association request when used with NL80211_CMD_NEW_STATION) 2712 * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element 2713 * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in 2714 * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT. 2715 * 2716 * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE 2717 * derivation in WPA3-Personal networks which are using SAE authentication. 2718 * This is a u8 attribute that encapsulates one of the values from 2719 * &enum nl80211_sae_pwe_mechanism. 2720 * 2721 * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when 2722 * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields 2723 * of %nl80211_sar_attrs which specifies the sar type and related 2724 * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs. 2725 * 2726 * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and 2727 * disassoc events to indicate that an immediate reconnect to the AP 2728 * is desired. 2729 * 2730 * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the 2731 * %NL80211_CMD_OBSS_COLOR_COLLISION event. 2732 * 2733 * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's 2734 * until the color switch event. 2735 * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are 2736 * switching to 2737 * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE 2738 * information for the time while performing a color switch. 2739 * 2740 * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID 2741 * advertisements (MBSSID) parameters in AP mode. 2742 * Kernel uses this attribute to indicate the driver's support for MBSSID 2743 * and enhanced multi-BSSID advertisements (EMA AP) to the userspace. 2744 * Userspace should use this attribute to configure per interface MBSSID 2745 * parameters. 2746 * See &enum nl80211_mbssid_config_attributes for details. 2747 * 2748 * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements. 2749 * Mandatory parameter for the transmitting interface to enable MBSSID. 2750 * Optional for the non-transmitting interfaces. 2751 * 2752 * @NL80211_ATTR_RADAR_BACKGROUND: Configure dedicated offchannel chain 2753 * available for radar/CAC detection on some hw. This chain can't be used 2754 * to transmit or receive frames and it is bounded to a running wdev. 2755 * Background radar/CAC detection allows to avoid the CAC downtime 2756 * switching on a different channel during CAC detection on the selected 2757 * radar channel. 2758 * 2759 * @NL80211_ATTR_AP_SETTINGS_FLAGS: u32 attribute contains ap settings flags, 2760 * enumerated in &enum nl80211_ap_settings_flags. This attribute shall be 2761 * used with %NL80211_CMD_START_AP request. 2762 * 2763 * @NL80211_ATTR_EHT_CAPABILITY: EHT Capability information element (from 2764 * association request when used with NL80211_CMD_NEW_STATION). Can be set 2765 * only if %NL80211_STA_FLAG_WME is set. 2766 * 2767 * @NL80211_ATTR_MLO_LINK_ID: A (u8) link ID for use with MLO, to be used with 2768 * various commands that need a link ID to operate. 2769 * @NL80211_ATTR_MLO_LINKS: A nested array of links, each containing some 2770 * per-link information and a link ID. 2771 * @NL80211_ATTR_MLD_ADDR: An MLD address, used with various commands such as 2772 * authenticate/associate. 2773 * 2774 * @NL80211_ATTR_MLO_SUPPORT: Flag attribute to indicate user space supports MLO 2775 * connection. Used with %NL80211_CMD_CONNECT. If this attribute is not 2776 * included in NL80211_CMD_CONNECT drivers must not perform MLO connection. 2777 * 2778 * @NL80211_ATTR_MAX_NUM_AKM_SUITES: U16 attribute. Indicates maximum number of 2779 * AKM suites allowed for %NL80211_CMD_CONNECT, %NL80211_CMD_ASSOCIATE and 2780 * %NL80211_CMD_START_AP in %NL80211_CMD_GET_WIPHY response. If this 2781 * attribute is not present userspace shall consider maximum number of AKM 2782 * suites allowed as %NL80211_MAX_NR_AKM_SUITES which is the legacy maximum 2783 * number prior to the introduction of this attribute. 2784 * 2785 * @NL80211_ATTR_EML_CAPABILITY: EML Capability information (u16) 2786 * @NL80211_ATTR_MLD_CAPA_AND_OPS: MLD Capabilities and Operations (u16) 2787 * 2788 * @NL80211_ATTR_TX_HW_TIMESTAMP: Hardware timestamp for TX operation in 2789 * nanoseconds (u64). This is the device clock timestamp so it will 2790 * probably reset when the device is stopped or the firmware is reset. 2791 * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the frame TX 2792 * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates 2793 * the ack TX timestamp. 2794 * @NL80211_ATTR_RX_HW_TIMESTAMP: Hardware timestamp for RX operation in 2795 * nanoseconds (u64). This is the device clock timestamp so it will 2796 * probably reset when the device is stopped or the firmware is reset. 2797 * When used with %NL80211_CMD_FRAME_TX_STATUS, indicates the ack RX 2798 * timestamp. When used with %NL80211_CMD_FRAME RX notification, indicates 2799 * the incoming frame RX timestamp. 2800 * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent 2801 * (re)associations. 2802 * 2803 * @NL80211_ATTR_PUNCT_BITMAP: (u32) Preamble puncturing bitmap, lowest 2804 * bit corresponds to the lowest 20 MHz channel. Each bit set to 1 2805 * indicates that the sub-channel is punctured. Higher 16 bits are 2806 * reserved. 2807 * 2808 * @NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS: Maximum number of peers that HW 2809 * timestamping can be enabled for concurrently (u16), a wiphy attribute. 2810 * A value of 0xffff indicates setting for all peers (i.e. not specifying 2811 * an address with %NL80211_CMD_SET_HW_TIMESTAMP) is supported. 2812 * @NL80211_ATTR_HW_TIMESTAMP_ENABLED: Indicates whether HW timestamping should 2813 * be enabled or not (flag attribute). 2814 * 2815 * @NL80211_ATTR_EMA_RNR_ELEMS: Optional nested attribute for 2816 * reduced neighbor report (RNR) elements. This attribute can be used 2817 * only when NL80211_MBSSID_CONFIG_ATTR_EMA is enabled. 2818 * Userspace is responsible for splitting the RNR into multiple 2819 * elements such that each element excludes the non-transmitting 2820 * profiles already included in the MBSSID element 2821 * (%NL80211_ATTR_MBSSID_ELEMS) at the same index. Each EMA beacon 2822 * will be generated by adding MBSSID and RNR elements at the same 2823 * index. If the userspace includes more RNR elements than number of 2824 * MBSSID elements then these will be added in every EMA beacon. 2825 * 2826 * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is 2827 * disabled. 2828 * 2829 * @NUM_NL80211_ATTR: total number of nl80211_attrs available 2830 * @NL80211_ATTR_MAX: highest attribute number currently defined 2831 * @__NL80211_ATTR_AFTER_LAST: internal use 2832 */ 2833 enum nl80211_attrs { 2834 /* don't change the order or add anything between, this is ABI! */ 2835 NL80211_ATTR_UNSPEC, 2836 2837 NL80211_ATTR_WIPHY, 2838 NL80211_ATTR_WIPHY_NAME, 2839 2840 NL80211_ATTR_IFINDEX, 2841 NL80211_ATTR_IFNAME, 2842 NL80211_ATTR_IFTYPE, 2843 2844 NL80211_ATTR_MAC, 2845 2846 NL80211_ATTR_KEY_DATA, 2847 NL80211_ATTR_KEY_IDX, 2848 NL80211_ATTR_KEY_CIPHER, 2849 NL80211_ATTR_KEY_SEQ, 2850 NL80211_ATTR_KEY_DEFAULT, 2851 2852 NL80211_ATTR_BEACON_INTERVAL, 2853 NL80211_ATTR_DTIM_PERIOD, 2854 NL80211_ATTR_BEACON_HEAD, 2855 NL80211_ATTR_BEACON_TAIL, 2856 2857 NL80211_ATTR_STA_AID, 2858 NL80211_ATTR_STA_FLAGS, 2859 NL80211_ATTR_STA_LISTEN_INTERVAL, 2860 NL80211_ATTR_STA_SUPPORTED_RATES, 2861 NL80211_ATTR_STA_VLAN, 2862 NL80211_ATTR_STA_INFO, 2863 2864 NL80211_ATTR_WIPHY_BANDS, 2865 2866 NL80211_ATTR_MNTR_FLAGS, 2867 2868 NL80211_ATTR_MESH_ID, 2869 NL80211_ATTR_STA_PLINK_ACTION, 2870 NL80211_ATTR_MPATH_NEXT_HOP, 2871 NL80211_ATTR_MPATH_INFO, 2872 2873 NL80211_ATTR_BSS_CTS_PROT, 2874 NL80211_ATTR_BSS_SHORT_PREAMBLE, 2875 NL80211_ATTR_BSS_SHORT_SLOT_TIME, 2876 2877 NL80211_ATTR_HT_CAPABILITY, 2878 2879 NL80211_ATTR_SUPPORTED_IFTYPES, 2880 2881 NL80211_ATTR_REG_ALPHA2, 2882 NL80211_ATTR_REG_RULES, 2883 2884 NL80211_ATTR_MESH_CONFIG, 2885 2886 NL80211_ATTR_BSS_BASIC_RATES, 2887 2888 NL80211_ATTR_WIPHY_TXQ_PARAMS, 2889 NL80211_ATTR_WIPHY_FREQ, 2890 NL80211_ATTR_WIPHY_CHANNEL_TYPE, 2891 2892 NL80211_ATTR_KEY_DEFAULT_MGMT, 2893 2894 NL80211_ATTR_MGMT_SUBTYPE, 2895 NL80211_ATTR_IE, 2896 2897 NL80211_ATTR_MAX_NUM_SCAN_SSIDS, 2898 2899 NL80211_ATTR_SCAN_FREQUENCIES, 2900 NL80211_ATTR_SCAN_SSIDS, 2901 NL80211_ATTR_GENERATION, /* replaces old SCAN_GENERATION */ 2902 NL80211_ATTR_BSS, 2903 2904 NL80211_ATTR_REG_INITIATOR, 2905 NL80211_ATTR_REG_TYPE, 2906 2907 NL80211_ATTR_SUPPORTED_COMMANDS, 2908 2909 NL80211_ATTR_FRAME, 2910 NL80211_ATTR_SSID, 2911 NL80211_ATTR_AUTH_TYPE, 2912 NL80211_ATTR_REASON_CODE, 2913 2914 NL80211_ATTR_KEY_TYPE, 2915 2916 NL80211_ATTR_MAX_SCAN_IE_LEN, 2917 NL80211_ATTR_CIPHER_SUITES, 2918 2919 NL80211_ATTR_FREQ_BEFORE, 2920 NL80211_ATTR_FREQ_AFTER, 2921 2922 NL80211_ATTR_FREQ_FIXED, 2923 2924 2925 NL80211_ATTR_WIPHY_RETRY_SHORT, 2926 NL80211_ATTR_WIPHY_RETRY_LONG, 2927 NL80211_ATTR_WIPHY_FRAG_THRESHOLD, 2928 NL80211_ATTR_WIPHY_RTS_THRESHOLD, 2929 2930 NL80211_ATTR_TIMED_OUT, 2931 2932 NL80211_ATTR_USE_MFP, 2933 2934 NL80211_ATTR_STA_FLAGS2, 2935 2936 NL80211_ATTR_CONTROL_PORT, 2937 2938 NL80211_ATTR_TESTDATA, 2939 2940 NL80211_ATTR_PRIVACY, 2941 2942 NL80211_ATTR_DISCONNECTED_BY_AP, 2943 NL80211_ATTR_STATUS_CODE, 2944 2945 NL80211_ATTR_CIPHER_SUITES_PAIRWISE, 2946 NL80211_ATTR_CIPHER_SUITE_GROUP, 2947 NL80211_ATTR_WPA_VERSIONS, 2948 NL80211_ATTR_AKM_SUITES, 2949 2950 NL80211_ATTR_REQ_IE, 2951 NL80211_ATTR_RESP_IE, 2952 2953 NL80211_ATTR_PREV_BSSID, 2954 2955 NL80211_ATTR_KEY, 2956 NL80211_ATTR_KEYS, 2957 2958 NL80211_ATTR_PID, 2959 2960 NL80211_ATTR_4ADDR, 2961 2962 NL80211_ATTR_SURVEY_INFO, 2963 2964 NL80211_ATTR_PMKID, 2965 NL80211_ATTR_MAX_NUM_PMKIDS, 2966 2967 NL80211_ATTR_DURATION, 2968 2969 NL80211_ATTR_COOKIE, 2970 2971 NL80211_ATTR_WIPHY_COVERAGE_CLASS, 2972 2973 NL80211_ATTR_TX_RATES, 2974 2975 NL80211_ATTR_FRAME_MATCH, 2976 2977 NL80211_ATTR_ACK, 2978 2979 NL80211_ATTR_PS_STATE, 2980 2981 NL80211_ATTR_CQM, 2982 2983 NL80211_ATTR_LOCAL_STATE_CHANGE, 2984 2985 NL80211_ATTR_AP_ISOLATE, 2986 2987 NL80211_ATTR_WIPHY_TX_POWER_SETTING, 2988 NL80211_ATTR_WIPHY_TX_POWER_LEVEL, 2989 2990 NL80211_ATTR_TX_FRAME_TYPES, 2991 NL80211_ATTR_RX_FRAME_TYPES, 2992 NL80211_ATTR_FRAME_TYPE, 2993 2994 NL80211_ATTR_CONTROL_PORT_ETHERTYPE, 2995 NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT, 2996 2997 NL80211_ATTR_SUPPORT_IBSS_RSN, 2998 2999 NL80211_ATTR_WIPHY_ANTENNA_TX, 3000 NL80211_ATTR_WIPHY_ANTENNA_RX, 3001 3002 NL80211_ATTR_MCAST_RATE, 3003 3004 NL80211_ATTR_OFFCHANNEL_TX_OK, 3005 3006 NL80211_ATTR_BSS_HT_OPMODE, 3007 3008 NL80211_ATTR_KEY_DEFAULT_TYPES, 3009 3010 NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION, 3011 3012 NL80211_ATTR_MESH_SETUP, 3013 3014 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX, 3015 NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX, 3016 3017 NL80211_ATTR_SUPPORT_MESH_AUTH, 3018 NL80211_ATTR_STA_PLINK_STATE, 3019 3020 NL80211_ATTR_WOWLAN_TRIGGERS, 3021 NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, 3022 3023 NL80211_ATTR_SCHED_SCAN_INTERVAL, 3024 3025 NL80211_ATTR_INTERFACE_COMBINATIONS, 3026 NL80211_ATTR_SOFTWARE_IFTYPES, 3027 3028 NL80211_ATTR_REKEY_DATA, 3029 3030 NL80211_ATTR_MAX_NUM_SCHED_SCAN_SSIDS, 3031 NL80211_ATTR_MAX_SCHED_SCAN_IE_LEN, 3032 3033 NL80211_ATTR_SCAN_SUPP_RATES, 3034 3035 NL80211_ATTR_HIDDEN_SSID, 3036 3037 NL80211_ATTR_IE_PROBE_RESP, 3038 NL80211_ATTR_IE_ASSOC_RESP, 3039 3040 NL80211_ATTR_STA_WME, 3041 NL80211_ATTR_SUPPORT_AP_UAPSD, 3042 3043 NL80211_ATTR_ROAM_SUPPORT, 3044 3045 NL80211_ATTR_SCHED_SCAN_MATCH, 3046 NL80211_ATTR_MAX_MATCH_SETS, 3047 3048 NL80211_ATTR_PMKSA_CANDIDATE, 3049 3050 NL80211_ATTR_TX_NO_CCK_RATE, 3051 3052 NL80211_ATTR_TDLS_ACTION, 3053 NL80211_ATTR_TDLS_DIALOG_TOKEN, 3054 NL80211_ATTR_TDLS_OPERATION, 3055 NL80211_ATTR_TDLS_SUPPORT, 3056 NL80211_ATTR_TDLS_EXTERNAL_SETUP, 3057 3058 NL80211_ATTR_DEVICE_AP_SME, 3059 3060 NL80211_ATTR_DONT_WAIT_FOR_ACK, 3061 3062 NL80211_ATTR_FEATURE_FLAGS, 3063 3064 NL80211_ATTR_PROBE_RESP_OFFLOAD, 3065 3066 NL80211_ATTR_PROBE_RESP, 3067 3068 NL80211_ATTR_DFS_REGION, 3069 3070 NL80211_ATTR_DISABLE_HT, 3071 NL80211_ATTR_HT_CAPABILITY_MASK, 3072 3073 NL80211_ATTR_NOACK_MAP, 3074 3075 NL80211_ATTR_INACTIVITY_TIMEOUT, 3076 3077 NL80211_ATTR_RX_SIGNAL_DBM, 3078 3079 NL80211_ATTR_BG_SCAN_PERIOD, 3080 3081 NL80211_ATTR_WDEV, 3082 3083 NL80211_ATTR_USER_REG_HINT_TYPE, 3084 3085 NL80211_ATTR_CONN_FAILED_REASON, 3086 3087 NL80211_ATTR_AUTH_DATA, 3088 3089 NL80211_ATTR_VHT_CAPABILITY, 3090 3091 NL80211_ATTR_SCAN_FLAGS, 3092 3093 NL80211_ATTR_CHANNEL_WIDTH, 3094 NL80211_ATTR_CENTER_FREQ1, 3095 NL80211_ATTR_CENTER_FREQ2, 3096 3097 NL80211_ATTR_P2P_CTWINDOW, 3098 NL80211_ATTR_P2P_OPPPS, 3099 3100 NL80211_ATTR_LOCAL_MESH_POWER_MODE, 3101 3102 NL80211_ATTR_ACL_POLICY, 3103 3104 NL80211_ATTR_MAC_ADDRS, 3105 3106 NL80211_ATTR_MAC_ACL_MAX, 3107 3108 NL80211_ATTR_RADAR_EVENT, 3109 3110 NL80211_ATTR_EXT_CAPA, 3111 NL80211_ATTR_EXT_CAPA_MASK, 3112 3113 NL80211_ATTR_STA_CAPABILITY, 3114 NL80211_ATTR_STA_EXT_CAPABILITY, 3115 3116 NL80211_ATTR_PROTOCOL_FEATURES, 3117 NL80211_ATTR_SPLIT_WIPHY_DUMP, 3118 3119 NL80211_ATTR_DISABLE_VHT, 3120 NL80211_ATTR_VHT_CAPABILITY_MASK, 3121 3122 NL80211_ATTR_MDID, 3123 NL80211_ATTR_IE_RIC, 3124 3125 NL80211_ATTR_CRIT_PROT_ID, 3126 NL80211_ATTR_MAX_CRIT_PROT_DURATION, 3127 3128 NL80211_ATTR_PEER_AID, 3129 3130 NL80211_ATTR_COALESCE_RULE, 3131 3132 NL80211_ATTR_CH_SWITCH_COUNT, 3133 NL80211_ATTR_CH_SWITCH_BLOCK_TX, 3134 NL80211_ATTR_CSA_IES, 3135 NL80211_ATTR_CNTDWN_OFFS_BEACON, 3136 NL80211_ATTR_CNTDWN_OFFS_PRESP, 3137 3138 NL80211_ATTR_RXMGMT_FLAGS, 3139 3140 NL80211_ATTR_STA_SUPPORTED_CHANNELS, 3141 3142 NL80211_ATTR_STA_SUPPORTED_OPER_CLASSES, 3143 3144 NL80211_ATTR_HANDLE_DFS, 3145 3146 NL80211_ATTR_SUPPORT_5_MHZ, 3147 NL80211_ATTR_SUPPORT_10_MHZ, 3148 3149 NL80211_ATTR_OPMODE_NOTIF, 3150 3151 NL80211_ATTR_VENDOR_ID, 3152 NL80211_ATTR_VENDOR_SUBCMD, 3153 NL80211_ATTR_VENDOR_DATA, 3154 NL80211_ATTR_VENDOR_EVENTS, 3155 3156 NL80211_ATTR_QOS_MAP, 3157 3158 NL80211_ATTR_MAC_HINT, 3159 NL80211_ATTR_WIPHY_FREQ_HINT, 3160 3161 NL80211_ATTR_MAX_AP_ASSOC_STA, 3162 3163 NL80211_ATTR_TDLS_PEER_CAPABILITY, 3164 3165 NL80211_ATTR_SOCKET_OWNER, 3166 3167 NL80211_ATTR_CSA_C_OFFSETS_TX, 3168 NL80211_ATTR_MAX_CSA_COUNTERS, 3169 3170 NL80211_ATTR_TDLS_INITIATOR, 3171 3172 NL80211_ATTR_USE_RRM, 3173 3174 NL80211_ATTR_WIPHY_DYN_ACK, 3175 3176 NL80211_ATTR_TSID, 3177 NL80211_ATTR_USER_PRIO, 3178 NL80211_ATTR_ADMITTED_TIME, 3179 3180 NL80211_ATTR_SMPS_MODE, 3181 3182 NL80211_ATTR_OPER_CLASS, 3183 3184 NL80211_ATTR_MAC_MASK, 3185 3186 NL80211_ATTR_WIPHY_SELF_MANAGED_REG, 3187 3188 NL80211_ATTR_EXT_FEATURES, 3189 3190 NL80211_ATTR_SURVEY_RADIO_STATS, 3191 3192 NL80211_ATTR_NETNS_FD, 3193 3194 NL80211_ATTR_SCHED_SCAN_DELAY, 3195 3196 NL80211_ATTR_REG_INDOOR, 3197 3198 NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS, 3199 NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL, 3200 NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, 3201 NL80211_ATTR_SCHED_SCAN_PLANS, 3202 3203 NL80211_ATTR_PBSS, 3204 3205 NL80211_ATTR_BSS_SELECT, 3206 3207 NL80211_ATTR_STA_SUPPORT_P2P_PS, 3208 3209 NL80211_ATTR_PAD, 3210 3211 NL80211_ATTR_IFTYPE_EXT_CAPA, 3212 3213 NL80211_ATTR_MU_MIMO_GROUP_DATA, 3214 NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR, 3215 3216 NL80211_ATTR_SCAN_START_TIME_TSF, 3217 NL80211_ATTR_SCAN_START_TIME_TSF_BSSID, 3218 NL80211_ATTR_MEASUREMENT_DURATION, 3219 NL80211_ATTR_MEASUREMENT_DURATION_MANDATORY, 3220 3221 NL80211_ATTR_MESH_PEER_AID, 3222 3223 NL80211_ATTR_NAN_MASTER_PREF, 3224 NL80211_ATTR_BANDS, 3225 NL80211_ATTR_NAN_FUNC, 3226 NL80211_ATTR_NAN_MATCH, 3227 3228 NL80211_ATTR_FILS_KEK, 3229 NL80211_ATTR_FILS_NONCES, 3230 3231 NL80211_ATTR_MULTICAST_TO_UNICAST_ENABLED, 3232 3233 NL80211_ATTR_BSSID, 3234 3235 NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI, 3236 NL80211_ATTR_SCHED_SCAN_RSSI_ADJUST, 3237 3238 NL80211_ATTR_TIMEOUT_REASON, 3239 3240 NL80211_ATTR_FILS_ERP_USERNAME, 3241 NL80211_ATTR_FILS_ERP_REALM, 3242 NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM, 3243 NL80211_ATTR_FILS_ERP_RRK, 3244 NL80211_ATTR_FILS_CACHE_ID, 3245 3246 NL80211_ATTR_PMK, 3247 3248 NL80211_ATTR_SCHED_SCAN_MULTI, 3249 NL80211_ATTR_SCHED_SCAN_MAX_REQS, 3250 3251 NL80211_ATTR_WANT_1X_4WAY_HS, 3252 NL80211_ATTR_PMKR0_NAME, 3253 NL80211_ATTR_PORT_AUTHORIZED, 3254 3255 NL80211_ATTR_EXTERNAL_AUTH_ACTION, 3256 NL80211_ATTR_EXTERNAL_AUTH_SUPPORT, 3257 3258 NL80211_ATTR_NSS, 3259 NL80211_ATTR_ACK_SIGNAL, 3260 3261 NL80211_ATTR_CONTROL_PORT_OVER_NL80211, 3262 3263 NL80211_ATTR_TXQ_STATS, 3264 NL80211_ATTR_TXQ_LIMIT, 3265 NL80211_ATTR_TXQ_MEMORY_LIMIT, 3266 NL80211_ATTR_TXQ_QUANTUM, 3267 3268 NL80211_ATTR_HE_CAPABILITY, 3269 3270 NL80211_ATTR_FTM_RESPONDER, 3271 3272 NL80211_ATTR_FTM_RESPONDER_STATS, 3273 3274 NL80211_ATTR_TIMEOUT, 3275 3276 NL80211_ATTR_PEER_MEASUREMENTS, 3277 3278 NL80211_ATTR_AIRTIME_WEIGHT, 3279 NL80211_ATTR_STA_TX_POWER_SETTING, 3280 NL80211_ATTR_STA_TX_POWER, 3281 3282 NL80211_ATTR_SAE_PASSWORD, 3283 3284 NL80211_ATTR_TWT_RESPONDER, 3285 3286 NL80211_ATTR_HE_OBSS_PD, 3287 3288 NL80211_ATTR_WIPHY_EDMG_CHANNELS, 3289 NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, 3290 3291 NL80211_ATTR_VLAN_ID, 3292 3293 NL80211_ATTR_HE_BSS_COLOR, 3294 3295 NL80211_ATTR_IFTYPE_AKM_SUITES, 3296 3297 NL80211_ATTR_TID_CONFIG, 3298 3299 NL80211_ATTR_CONTROL_PORT_NO_PREAUTH, 3300 3301 NL80211_ATTR_PMK_LIFETIME, 3302 NL80211_ATTR_PMK_REAUTH_THRESHOLD, 3303 3304 NL80211_ATTR_RECEIVE_MULTICAST, 3305 NL80211_ATTR_WIPHY_FREQ_OFFSET, 3306 NL80211_ATTR_CENTER_FREQ1_OFFSET, 3307 NL80211_ATTR_SCAN_FREQ_KHZ, 3308 3309 NL80211_ATTR_HE_6GHZ_CAPABILITY, 3310 3311 NL80211_ATTR_FILS_DISCOVERY, 3312 3313 NL80211_ATTR_UNSOL_BCAST_PROBE_RESP, 3314 3315 NL80211_ATTR_S1G_CAPABILITY, 3316 NL80211_ATTR_S1G_CAPABILITY_MASK, 3317 3318 NL80211_ATTR_SAE_PWE, 3319 3320 NL80211_ATTR_RECONNECT_REQUESTED, 3321 3322 NL80211_ATTR_SAR_SPEC, 3323 3324 NL80211_ATTR_DISABLE_HE, 3325 3326 NL80211_ATTR_OBSS_COLOR_BITMAP, 3327 3328 NL80211_ATTR_COLOR_CHANGE_COUNT, 3329 NL80211_ATTR_COLOR_CHANGE_COLOR, 3330 NL80211_ATTR_COLOR_CHANGE_ELEMS, 3331 3332 NL80211_ATTR_MBSSID_CONFIG, 3333 NL80211_ATTR_MBSSID_ELEMS, 3334 3335 NL80211_ATTR_RADAR_BACKGROUND, 3336 3337 NL80211_ATTR_AP_SETTINGS_FLAGS, 3338 3339 NL80211_ATTR_EHT_CAPABILITY, 3340 3341 NL80211_ATTR_DISABLE_EHT, 3342 3343 NL80211_ATTR_MLO_LINKS, 3344 NL80211_ATTR_MLO_LINK_ID, 3345 NL80211_ATTR_MLD_ADDR, 3346 3347 NL80211_ATTR_MLO_SUPPORT, 3348 3349 NL80211_ATTR_MAX_NUM_AKM_SUITES, 3350 3351 NL80211_ATTR_EML_CAPABILITY, 3352 NL80211_ATTR_MLD_CAPA_AND_OPS, 3353 3354 NL80211_ATTR_TX_HW_TIMESTAMP, 3355 NL80211_ATTR_RX_HW_TIMESTAMP, 3356 NL80211_ATTR_TD_BITMAP, 3357 3358 NL80211_ATTR_PUNCT_BITMAP, 3359 3360 NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS, 3361 NL80211_ATTR_HW_TIMESTAMP_ENABLED, 3362 3363 NL80211_ATTR_EMA_RNR_ELEMS, 3364 3365 NL80211_ATTR_MLO_LINK_DISABLED, 3366 3367 /* add attributes here, update the policy in nl80211.c */ 3368 3369 __NL80211_ATTR_AFTER_LAST, 3370 NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, 3371 NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 3372 }; 3373 3374 /* source-level API compatibility */ 3375 #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION 3376 #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG 3377 #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER 3378 #define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA 3379 #define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON 3380 #define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP 3381 3382 /* 3383 * Allow user space programs to use #ifdef on new attributes by defining them 3384 * here 3385 */ 3386 #define NL80211_CMD_CONNECT NL80211_CMD_CONNECT 3387 #define NL80211_ATTR_HT_CAPABILITY NL80211_ATTR_HT_CAPABILITY 3388 #define NL80211_ATTR_BSS_BASIC_RATES NL80211_ATTR_BSS_BASIC_RATES 3389 #define NL80211_ATTR_WIPHY_TXQ_PARAMS NL80211_ATTR_WIPHY_TXQ_PARAMS 3390 #define NL80211_ATTR_WIPHY_FREQ NL80211_ATTR_WIPHY_FREQ 3391 #define NL80211_ATTR_WIPHY_CHANNEL_TYPE NL80211_ATTR_WIPHY_CHANNEL_TYPE 3392 #define NL80211_ATTR_MGMT_SUBTYPE NL80211_ATTR_MGMT_SUBTYPE 3393 #define NL80211_ATTR_IE NL80211_ATTR_IE 3394 #define NL80211_ATTR_REG_INITIATOR NL80211_ATTR_REG_INITIATOR 3395 #define NL80211_ATTR_REG_TYPE NL80211_ATTR_REG_TYPE 3396 #define NL80211_ATTR_FRAME NL80211_ATTR_FRAME 3397 #define NL80211_ATTR_SSID NL80211_ATTR_SSID 3398 #define NL80211_ATTR_AUTH_TYPE NL80211_ATTR_AUTH_TYPE 3399 #define NL80211_ATTR_REASON_CODE NL80211_ATTR_REASON_CODE 3400 #define NL80211_ATTR_CIPHER_SUITES_PAIRWISE NL80211_ATTR_CIPHER_SUITES_PAIRWISE 3401 #define NL80211_ATTR_CIPHER_SUITE_GROUP NL80211_ATTR_CIPHER_SUITE_GROUP 3402 #define NL80211_ATTR_WPA_VERSIONS NL80211_ATTR_WPA_VERSIONS 3403 #define NL80211_ATTR_AKM_SUITES NL80211_ATTR_AKM_SUITES 3404 #define NL80211_ATTR_KEY NL80211_ATTR_KEY 3405 #define NL80211_ATTR_KEYS NL80211_ATTR_KEYS 3406 #define NL80211_ATTR_FEATURE_FLAGS NL80211_ATTR_FEATURE_FLAGS 3407 3408 #define NL80211_WIPHY_NAME_MAXLEN 64 3409 3410 #define NL80211_MAX_SUPP_RATES 32 3411 #define NL80211_MAX_SUPP_HT_RATES 77 3412 #define NL80211_MAX_SUPP_REG_RULES 128 3413 #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 3414 #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 3415 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 3416 #define NL80211_HT_CAPABILITY_LEN 26 3417 #define NL80211_VHT_CAPABILITY_LEN 12 3418 #define NL80211_HE_MIN_CAPABILITY_LEN 16 3419 #define NL80211_HE_MAX_CAPABILITY_LEN 54 3420 #define NL80211_MAX_NR_CIPHER_SUITES 5 3421 3422 /* 3423 * NL80211_MAX_NR_AKM_SUITES is obsolete when %NL80211_ATTR_MAX_NUM_AKM_SUITES 3424 * present in %NL80211_CMD_GET_WIPHY response. 3425 */ 3426 #define NL80211_MAX_NR_AKM_SUITES 2 3427 #define NL80211_EHT_MIN_CAPABILITY_LEN 13 3428 #define NL80211_EHT_MAX_CAPABILITY_LEN 51 3429 3430 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME 10 3431 3432 /* default RSSI threshold for scan results if none specified. */ 3433 #define NL80211_SCAN_RSSI_THOLD_OFF -300 3434 3435 #define NL80211_CQM_TXE_MAX_INTVL 1800 3436 3437 /** 3438 * enum nl80211_iftype - (virtual) interface types 3439 * 3440 * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides 3441 * @NL80211_IFTYPE_ADHOC: independent BSS member 3442 * @NL80211_IFTYPE_STATION: managed BSS member 3443 * @NL80211_IFTYPE_AP: access point 3444 * @NL80211_IFTYPE_AP_VLAN: VLAN interface for access points; VLAN interfaces 3445 * are a bit special in that they must always be tied to a pre-existing 3446 * AP type interface. 3447 * @NL80211_IFTYPE_WDS: wireless distribution interface 3448 * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames 3449 * @NL80211_IFTYPE_MESH_POINT: mesh point 3450 * @NL80211_IFTYPE_P2P_CLIENT: P2P client 3451 * @NL80211_IFTYPE_P2P_GO: P2P group owner 3452 * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev 3453 * and therefore can't be created in the normal ways, use the 3454 * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE 3455 * commands to create and destroy one 3456 * @NL80211_IFTYPE_OCB: Outside Context of a BSS 3457 * This mode corresponds to the MIB variable dot11OCBActivated=true 3458 * @NL80211_IFTYPE_NAN: NAN device interface type (not a netdev) 3459 * @NL80211_IFTYPE_MAX: highest interface type number currently defined 3460 * @NUM_NL80211_IFTYPES: number of defined interface types 3461 * 3462 * These values are used with the %NL80211_ATTR_IFTYPE 3463 * to set the type of an interface. 3464 * 3465 */ 3466 enum nl80211_iftype { 3467 NL80211_IFTYPE_UNSPECIFIED, 3468 NL80211_IFTYPE_ADHOC, 3469 NL80211_IFTYPE_STATION, 3470 NL80211_IFTYPE_AP, 3471 NL80211_IFTYPE_AP_VLAN, 3472 NL80211_IFTYPE_WDS, 3473 NL80211_IFTYPE_MONITOR, 3474 NL80211_IFTYPE_MESH_POINT, 3475 NL80211_IFTYPE_P2P_CLIENT, 3476 NL80211_IFTYPE_P2P_GO, 3477 NL80211_IFTYPE_P2P_DEVICE, 3478 NL80211_IFTYPE_OCB, 3479 NL80211_IFTYPE_NAN, 3480 3481 /* keep last */ 3482 NUM_NL80211_IFTYPES, 3483 NL80211_IFTYPE_MAX = NUM_NL80211_IFTYPES - 1 3484 }; 3485 3486 /** 3487 * enum nl80211_sta_flags - station flags 3488 * 3489 * Station flags. When a station is added to an AP interface, it is 3490 * assumed to be already associated (and hence authenticated.) 3491 * 3492 * @__NL80211_STA_FLAG_INVALID: attribute number 0 is reserved 3493 * @NL80211_STA_FLAG_AUTHORIZED: station is authorized (802.1X) 3494 * @NL80211_STA_FLAG_SHORT_PREAMBLE: station is capable of receiving frames 3495 * with short barker preamble 3496 * @NL80211_STA_FLAG_WME: station is WME/QoS capable 3497 * @NL80211_STA_FLAG_MFP: station uses management frame protection 3498 * @NL80211_STA_FLAG_AUTHENTICATED: station is authenticated 3499 * @NL80211_STA_FLAG_TDLS_PEER: station is a TDLS peer -- this flag should 3500 * only be used in managed mode (even in the flags mask). Note that the 3501 * flag can't be changed, it is only valid while adding a station, and 3502 * attempts to change it will silently be ignored (rather than rejected 3503 * as errors.) 3504 * @NL80211_STA_FLAG_ASSOCIATED: station is associated; used with drivers 3505 * that support %NL80211_FEATURE_FULL_AP_CLIENT_STATE to transition a 3506 * previously added station into associated state 3507 * @NL80211_STA_FLAG_MAX: highest station flag number currently defined 3508 * @__NL80211_STA_FLAG_AFTER_LAST: internal use 3509 */ 3510 enum nl80211_sta_flags { 3511 __NL80211_STA_FLAG_INVALID, 3512 NL80211_STA_FLAG_AUTHORIZED, 3513 NL80211_STA_FLAG_SHORT_PREAMBLE, 3514 NL80211_STA_FLAG_WME, 3515 NL80211_STA_FLAG_MFP, 3516 NL80211_STA_FLAG_AUTHENTICATED, 3517 NL80211_STA_FLAG_TDLS_PEER, 3518 NL80211_STA_FLAG_ASSOCIATED, 3519 3520 /* keep last */ 3521 __NL80211_STA_FLAG_AFTER_LAST, 3522 NL80211_STA_FLAG_MAX = __NL80211_STA_FLAG_AFTER_LAST - 1 3523 }; 3524 3525 /** 3526 * enum nl80211_sta_p2p_ps_status - station support of P2P PS 3527 * 3528 * @NL80211_P2P_PS_UNSUPPORTED: station doesn't support P2P PS mechanism 3529 * @@NL80211_P2P_PS_SUPPORTED: station supports P2P PS mechanism 3530 * @NUM_NL80211_P2P_PS_STATUS: number of values 3531 */ 3532 enum nl80211_sta_p2p_ps_status { 3533 NL80211_P2P_PS_UNSUPPORTED = 0, 3534 NL80211_P2P_PS_SUPPORTED, 3535 3536 NUM_NL80211_P2P_PS_STATUS, 3537 }; 3538 3539 #define NL80211_STA_FLAG_MAX_OLD_API NL80211_STA_FLAG_TDLS_PEER 3540 3541 /** 3542 * struct nl80211_sta_flag_update - station flags mask/set 3543 * @mask: mask of station flags to set 3544 * @set: which values to set them to 3545 * 3546 * Both mask and set contain bits as per &enum nl80211_sta_flags. 3547 */ 3548 struct nl80211_sta_flag_update { 3549 __u32 mask; 3550 __u32 set; 3551 } __attribute__((packed)); 3552 3553 /** 3554 * enum nl80211_he_gi - HE guard interval 3555 * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec 3556 * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec 3557 * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec 3558 */ 3559 enum nl80211_he_gi { 3560 NL80211_RATE_INFO_HE_GI_0_8, 3561 NL80211_RATE_INFO_HE_GI_1_6, 3562 NL80211_RATE_INFO_HE_GI_3_2, 3563 }; 3564 3565 /** 3566 * enum nl80211_he_ltf - HE long training field 3567 * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec 3568 * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec 3569 * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec 3570 */ 3571 enum nl80211_he_ltf { 3572 NL80211_RATE_INFO_HE_1XLTF, 3573 NL80211_RATE_INFO_HE_2XLTF, 3574 NL80211_RATE_INFO_HE_4XLTF, 3575 }; 3576 3577 /** 3578 * enum nl80211_he_ru_alloc - HE RU allocation values 3579 * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation 3580 * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation 3581 * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation 3582 * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation 3583 * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation 3584 * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation 3585 * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation 3586 */ 3587 enum nl80211_he_ru_alloc { 3588 NL80211_RATE_INFO_HE_RU_ALLOC_26, 3589 NL80211_RATE_INFO_HE_RU_ALLOC_52, 3590 NL80211_RATE_INFO_HE_RU_ALLOC_106, 3591 NL80211_RATE_INFO_HE_RU_ALLOC_242, 3592 NL80211_RATE_INFO_HE_RU_ALLOC_484, 3593 NL80211_RATE_INFO_HE_RU_ALLOC_996, 3594 NL80211_RATE_INFO_HE_RU_ALLOC_2x996, 3595 }; 3596 3597 /** 3598 * enum nl80211_eht_gi - EHT guard interval 3599 * @NL80211_RATE_INFO_EHT_GI_0_8: 0.8 usec 3600 * @NL80211_RATE_INFO_EHT_GI_1_6: 1.6 usec 3601 * @NL80211_RATE_INFO_EHT_GI_3_2: 3.2 usec 3602 */ 3603 enum nl80211_eht_gi { 3604 NL80211_RATE_INFO_EHT_GI_0_8, 3605 NL80211_RATE_INFO_EHT_GI_1_6, 3606 NL80211_RATE_INFO_EHT_GI_3_2, 3607 }; 3608 3609 /** 3610 * enum nl80211_eht_ru_alloc - EHT RU allocation values 3611 * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation 3612 * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation 3613 * @NL80211_RATE_INFO_EHT_RU_ALLOC_52P26: 52+26-tone RU allocation 3614 * @NL80211_RATE_INFO_EHT_RU_ALLOC_106: 106-tone RU allocation 3615 * @NL80211_RATE_INFO_EHT_RU_ALLOC_106P26: 106+26 tone RU allocation 3616 * @NL80211_RATE_INFO_EHT_RU_ALLOC_242: 242-tone RU allocation 3617 * @NL80211_RATE_INFO_EHT_RU_ALLOC_484: 484-tone RU allocation 3618 * @NL80211_RATE_INFO_EHT_RU_ALLOC_484P242: 484+242 tone RU allocation 3619 * @NL80211_RATE_INFO_EHT_RU_ALLOC_996: 996-tone RU allocation 3620 * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484: 996+484 tone RU allocation 3621 * @NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242: 996+484+242 tone RU allocation 3622 * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996: 2x996-tone RU allocation 3623 * @NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484: 2x996+484 tone RU allocation 3624 * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996: 3x996-tone RU allocation 3625 * @NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484: 3x996+484 tone RU allocation 3626 * @NL80211_RATE_INFO_EHT_RU_ALLOC_4x996: 4x996-tone RU allocation 3627 */ 3628 enum nl80211_eht_ru_alloc { 3629 NL80211_RATE_INFO_EHT_RU_ALLOC_26, 3630 NL80211_RATE_INFO_EHT_RU_ALLOC_52, 3631 NL80211_RATE_INFO_EHT_RU_ALLOC_52P26, 3632 NL80211_RATE_INFO_EHT_RU_ALLOC_106, 3633 NL80211_RATE_INFO_EHT_RU_ALLOC_106P26, 3634 NL80211_RATE_INFO_EHT_RU_ALLOC_242, 3635 NL80211_RATE_INFO_EHT_RU_ALLOC_484, 3636 NL80211_RATE_INFO_EHT_RU_ALLOC_484P242, 3637 NL80211_RATE_INFO_EHT_RU_ALLOC_996, 3638 NL80211_RATE_INFO_EHT_RU_ALLOC_996P484, 3639 NL80211_RATE_INFO_EHT_RU_ALLOC_996P484P242, 3640 NL80211_RATE_INFO_EHT_RU_ALLOC_2x996, 3641 NL80211_RATE_INFO_EHT_RU_ALLOC_2x996P484, 3642 NL80211_RATE_INFO_EHT_RU_ALLOC_3x996, 3643 NL80211_RATE_INFO_EHT_RU_ALLOC_3x996P484, 3644 NL80211_RATE_INFO_EHT_RU_ALLOC_4x996, 3645 }; 3646 3647 /** 3648 * enum nl80211_rate_info - bitrate information 3649 * 3650 * These attribute types are used with %NL80211_STA_INFO_TXRATE 3651 * when getting information about the bitrate of a station. 3652 * There are 2 attributes for bitrate, a legacy one that represents 3653 * a 16-bit value, and new one that represents a 32-bit value. 3654 * If the rate value fits into 16 bit, both attributes are reported 3655 * with the same value. If the rate is too high to fit into 16 bits 3656 * (>6.5535Gbps) only 32-bit attribute is included. 3657 * User space tools encouraged to use the 32-bit attribute and fall 3658 * back to the 16-bit one for compatibility with older kernels. 3659 * 3660 * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved 3661 * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) 3662 * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) 3663 * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate 3664 * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval 3665 * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) 3666 * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined 3667 * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) 3668 * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) 3669 * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate 3670 * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the 3671 * same as 160 for purposes of the bitrates 3672 * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate 3673 * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is 3674 * a legacy rate and will be reported as the actual bitrate, i.e. 3675 * half the base (20 MHz) rate 3676 * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is 3677 * a legacy rate and will be reported as the actual bitrate, i.e. 3678 * a quarter of the base (20 MHz) rate 3679 * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11) 3680 * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8) 3681 * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier 3682 * (u8, see &enum nl80211_he_gi) 3683 * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1) 3684 * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then 3685 * non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc) 3686 * @NL80211_RATE_INFO_320_MHZ_WIDTH: 320 MHz bitrate 3687 * @NL80211_RATE_INFO_EHT_MCS: EHT MCS index (u8, 0-15) 3688 * @NL80211_RATE_INFO_EHT_NSS: EHT NSS value (u8, 1-8) 3689 * @NL80211_RATE_INFO_EHT_GI: EHT guard interval identifier 3690 * (u8, see &enum nl80211_eht_gi) 3691 * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then 3692 * non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc) 3693 * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10) 3694 * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4) 3695 * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate 3696 * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate 3697 * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate 3698 * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate 3699 * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate 3700 * @__NL80211_RATE_INFO_AFTER_LAST: internal use 3701 */ 3702 enum nl80211_rate_info { 3703 __NL80211_RATE_INFO_INVALID, 3704 NL80211_RATE_INFO_BITRATE, 3705 NL80211_RATE_INFO_MCS, 3706 NL80211_RATE_INFO_40_MHZ_WIDTH, 3707 NL80211_RATE_INFO_SHORT_GI, 3708 NL80211_RATE_INFO_BITRATE32, 3709 NL80211_RATE_INFO_VHT_MCS, 3710 NL80211_RATE_INFO_VHT_NSS, 3711 NL80211_RATE_INFO_80_MHZ_WIDTH, 3712 NL80211_RATE_INFO_80P80_MHZ_WIDTH, 3713 NL80211_RATE_INFO_160_MHZ_WIDTH, 3714 NL80211_RATE_INFO_10_MHZ_WIDTH, 3715 NL80211_RATE_INFO_5_MHZ_WIDTH, 3716 NL80211_RATE_INFO_HE_MCS, 3717 NL80211_RATE_INFO_HE_NSS, 3718 NL80211_RATE_INFO_HE_GI, 3719 NL80211_RATE_INFO_HE_DCM, 3720 NL80211_RATE_INFO_HE_RU_ALLOC, 3721 NL80211_RATE_INFO_320_MHZ_WIDTH, 3722 NL80211_RATE_INFO_EHT_MCS, 3723 NL80211_RATE_INFO_EHT_NSS, 3724 NL80211_RATE_INFO_EHT_GI, 3725 NL80211_RATE_INFO_EHT_RU_ALLOC, 3726 NL80211_RATE_INFO_S1G_MCS, 3727 NL80211_RATE_INFO_S1G_NSS, 3728 NL80211_RATE_INFO_1_MHZ_WIDTH, 3729 NL80211_RATE_INFO_2_MHZ_WIDTH, 3730 NL80211_RATE_INFO_4_MHZ_WIDTH, 3731 NL80211_RATE_INFO_8_MHZ_WIDTH, 3732 NL80211_RATE_INFO_16_MHZ_WIDTH, 3733 3734 /* keep last */ 3735 __NL80211_RATE_INFO_AFTER_LAST, 3736 NL80211_RATE_INFO_MAX = __NL80211_RATE_INFO_AFTER_LAST - 1 3737 }; 3738 3739 /** 3740 * enum nl80211_sta_bss_param - BSS information collected by STA 3741 * 3742 * These attribute types are used with %NL80211_STA_INFO_BSS_PARAM 3743 * when getting information about the bitrate of a station. 3744 * 3745 * @__NL80211_STA_BSS_PARAM_INVALID: attribute number 0 is reserved 3746 * @NL80211_STA_BSS_PARAM_CTS_PROT: whether CTS protection is enabled (flag) 3747 * @NL80211_STA_BSS_PARAM_SHORT_PREAMBLE: whether short preamble is enabled 3748 * (flag) 3749 * @NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME: whether short slot time is enabled 3750 * (flag) 3751 * @NL80211_STA_BSS_PARAM_DTIM_PERIOD: DTIM period for beaconing (u8) 3752 * @NL80211_STA_BSS_PARAM_BEACON_INTERVAL: Beacon interval (u16) 3753 * @NL80211_STA_BSS_PARAM_MAX: highest sta_bss_param number currently defined 3754 * @__NL80211_STA_BSS_PARAM_AFTER_LAST: internal use 3755 */ 3756 enum nl80211_sta_bss_param { 3757 __NL80211_STA_BSS_PARAM_INVALID, 3758 NL80211_STA_BSS_PARAM_CTS_PROT, 3759 NL80211_STA_BSS_PARAM_SHORT_PREAMBLE, 3760 NL80211_STA_BSS_PARAM_SHORT_SLOT_TIME, 3761 NL80211_STA_BSS_PARAM_DTIM_PERIOD, 3762 NL80211_STA_BSS_PARAM_BEACON_INTERVAL, 3763 3764 /* keep last */ 3765 __NL80211_STA_BSS_PARAM_AFTER_LAST, 3766 NL80211_STA_BSS_PARAM_MAX = __NL80211_STA_BSS_PARAM_AFTER_LAST - 1 3767 }; 3768 3769 /** 3770 * enum nl80211_sta_info - station information 3771 * 3772 * These attribute types are used with %NL80211_ATTR_STA_INFO 3773 * when getting information about a station. 3774 * 3775 * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved 3776 * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) 3777 * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) 3778 * (u32, from this station) 3779 * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) 3780 * (u32, to this station) 3781 * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) 3782 * (u64, from this station) 3783 * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) 3784 * (u64, to this station) 3785 * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) 3786 * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute 3787 * containing info as possible, see &enum nl80211_rate_info 3788 * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) 3789 * (u32, from this station) 3790 * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) 3791 * (u32, to this station) 3792 * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) 3793 * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) 3794 * (u32, to this station) 3795 * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) 3796 * @NL80211_STA_INFO_LLID: the station's mesh LLID 3797 * @NL80211_STA_INFO_PLID: the station's mesh PLID 3798 * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station 3799 * (see %enum nl80211_plink_state) 3800 * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested 3801 * attribute, like NL80211_STA_INFO_TX_BITRATE. 3802 * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute 3803 * containing info as possible, see &enum nl80211_sta_bss_param 3804 * @NL80211_STA_INFO_CONNECTED_TIME: time since the station is last connected 3805 * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. 3806 * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) 3807 * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) 3808 * @NL80211_STA_INFO_LOCAL_PM: local mesh STA link-specific power mode 3809 * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode 3810 * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards 3811 * non-peer STA 3812 * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU 3813 * Contains a nested array of signal strength attributes (u8, dBm) 3814 * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average 3815 * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. 3816 * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the 3817 * 802.11 header (u32, kbps) 3818 * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons 3819 * (u64) 3820 * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) 3821 * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average 3822 * for beacons only (u8, dBm) 3823 * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) 3824 * This is a nested attribute where each the inner attribute number is the 3825 * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; 3826 * each one of those is again nested with &enum nl80211_tid_stats 3827 * attributes carrying the actual values. 3828 * @NL80211_STA_INFO_RX_DURATION: aggregate PPDU duration for all frames 3829 * received from the station (u64, usec) 3830 * @NL80211_STA_INFO_PAD: attribute used for padding for 64-bit alignment 3831 * @NL80211_STA_INFO_ACK_SIGNAL: signal strength of the last ACK frame(u8, dBm) 3832 * @NL80211_STA_INFO_ACK_SIGNAL_AVG: avg signal strength of ACK frames (s8, dBm) 3833 * @NL80211_STA_INFO_RX_MPDUS: total number of received packets (MPDUs) 3834 * (u32, from this station) 3835 * @NL80211_STA_INFO_FCS_ERROR_COUNT: total number of packets (MPDUs) received 3836 * with an FCS error (u32, from this station). This count may not include 3837 * some packets with an FCS error due to TA corruption. Hence this counter 3838 * might not be fully accurate. 3839 * @NL80211_STA_INFO_CONNECTED_TO_GATE: set to true if STA has a path to a 3840 * mesh gate (u8, 0 or 1) 3841 * @NL80211_STA_INFO_TX_DURATION: aggregate PPDU duration for all frames 3842 * sent to the station (u64, usec) 3843 * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16) 3844 * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station 3845 * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds) 3846 * of STA's association 3847 * @NL80211_STA_INFO_CONNECTED_TO_AS: set to true if STA has a path to a 3848 * authentication server (u8, 0 or 1) 3849 * @__NL80211_STA_INFO_AFTER_LAST: internal 3850 * @NL80211_STA_INFO_MAX: highest possible station info attribute 3851 */ 3852 enum nl80211_sta_info { 3853 __NL80211_STA_INFO_INVALID, 3854 NL80211_STA_INFO_INACTIVE_TIME, 3855 NL80211_STA_INFO_RX_BYTES, 3856 NL80211_STA_INFO_TX_BYTES, 3857 NL80211_STA_INFO_LLID, 3858 NL80211_STA_INFO_PLID, 3859 NL80211_STA_INFO_PLINK_STATE, 3860 NL80211_STA_INFO_SIGNAL, 3861 NL80211_STA_INFO_TX_BITRATE, 3862 NL80211_STA_INFO_RX_PACKETS, 3863 NL80211_STA_INFO_TX_PACKETS, 3864 NL80211_STA_INFO_TX_RETRIES, 3865 NL80211_STA_INFO_TX_FAILED, 3866 NL80211_STA_INFO_SIGNAL_AVG, 3867 NL80211_STA_INFO_RX_BITRATE, 3868 NL80211_STA_INFO_BSS_PARAM, 3869 NL80211_STA_INFO_CONNECTED_TIME, 3870 NL80211_STA_INFO_STA_FLAGS, 3871 NL80211_STA_INFO_BEACON_LOSS, 3872 NL80211_STA_INFO_T_OFFSET, 3873 NL80211_STA_INFO_LOCAL_PM, 3874 NL80211_STA_INFO_PEER_PM, 3875 NL80211_STA_INFO_NONPEER_PM, 3876 NL80211_STA_INFO_RX_BYTES64, 3877 NL80211_STA_INFO_TX_BYTES64, 3878 NL80211_STA_INFO_CHAIN_SIGNAL, 3879 NL80211_STA_INFO_CHAIN_SIGNAL_AVG, 3880 NL80211_STA_INFO_EXPECTED_THROUGHPUT, 3881 NL80211_STA_INFO_RX_DROP_MISC, 3882 NL80211_STA_INFO_BEACON_RX, 3883 NL80211_STA_INFO_BEACON_SIGNAL_AVG, 3884 NL80211_STA_INFO_TID_STATS, 3885 NL80211_STA_INFO_RX_DURATION, 3886 NL80211_STA_INFO_PAD, 3887 NL80211_STA_INFO_ACK_SIGNAL, 3888 NL80211_STA_INFO_ACK_SIGNAL_AVG, 3889 NL80211_STA_INFO_RX_MPDUS, 3890 NL80211_STA_INFO_FCS_ERROR_COUNT, 3891 NL80211_STA_INFO_CONNECTED_TO_GATE, 3892 NL80211_STA_INFO_TX_DURATION, 3893 NL80211_STA_INFO_AIRTIME_WEIGHT, 3894 NL80211_STA_INFO_AIRTIME_LINK_METRIC, 3895 NL80211_STA_INFO_ASSOC_AT_BOOTTIME, 3896 NL80211_STA_INFO_CONNECTED_TO_AS, 3897 3898 /* keep last */ 3899 __NL80211_STA_INFO_AFTER_LAST, 3900 NL80211_STA_INFO_MAX = __NL80211_STA_INFO_AFTER_LAST - 1 3901 }; 3902 3903 /* we renamed this - stay compatible */ 3904 #define NL80211_STA_INFO_DATA_ACK_SIGNAL_AVG NL80211_STA_INFO_ACK_SIGNAL_AVG 3905 3906 3907 /** 3908 * enum nl80211_tid_stats - per TID statistics attributes 3909 * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved 3910 * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) 3911 * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or 3912 * attempted to transmit; u64) 3913 * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for 3914 * transmitted MSDUs (not counting the first attempt; u64) 3915 * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted 3916 * MSDUs (u64) 3917 * @NL80211_TID_STATS_PAD: attribute used for padding for 64-bit alignment 3918 * @NL80211_TID_STATS_TXQ_STATS: TXQ stats (nested attribute) 3919 * @NUM_NL80211_TID_STATS: number of attributes here 3920 * @NL80211_TID_STATS_MAX: highest numbered attribute here 3921 */ 3922 enum nl80211_tid_stats { 3923 __NL80211_TID_STATS_INVALID, 3924 NL80211_TID_STATS_RX_MSDU, 3925 NL80211_TID_STATS_TX_MSDU, 3926 NL80211_TID_STATS_TX_MSDU_RETRIES, 3927 NL80211_TID_STATS_TX_MSDU_FAILED, 3928 NL80211_TID_STATS_PAD, 3929 NL80211_TID_STATS_TXQ_STATS, 3930 3931 /* keep last */ 3932 NUM_NL80211_TID_STATS, 3933 NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 3934 }; 3935 3936 /** 3937 * enum nl80211_txq_stats - per TXQ statistics attributes 3938 * @__NL80211_TXQ_STATS_INVALID: attribute number 0 is reserved 3939 * @NUM_NL80211_TXQ_STATS: number of attributes here 3940 * @NL80211_TXQ_STATS_BACKLOG_BYTES: number of bytes currently backlogged 3941 * @NL80211_TXQ_STATS_BACKLOG_PACKETS: number of packets currently 3942 * backlogged 3943 * @NL80211_TXQ_STATS_FLOWS: total number of new flows seen 3944 * @NL80211_TXQ_STATS_DROPS: total number of packet drops 3945 * @NL80211_TXQ_STATS_ECN_MARKS: total number of packet ECN marks 3946 * @NL80211_TXQ_STATS_OVERLIMIT: number of drops due to queue space overflow 3947 * @NL80211_TXQ_STATS_OVERMEMORY: number of drops due to memory limit overflow 3948 * (only for per-phy stats) 3949 * @NL80211_TXQ_STATS_COLLISIONS: number of hash collisions 3950 * @NL80211_TXQ_STATS_TX_BYTES: total number of bytes dequeued from TXQ 3951 * @NL80211_TXQ_STATS_TX_PACKETS: total number of packets dequeued from TXQ 3952 * @NL80211_TXQ_STATS_MAX_FLOWS: number of flow buckets for PHY 3953 * @NL80211_TXQ_STATS_MAX: highest numbered attribute here 3954 */ 3955 enum nl80211_txq_stats { 3956 __NL80211_TXQ_STATS_INVALID, 3957 NL80211_TXQ_STATS_BACKLOG_BYTES, 3958 NL80211_TXQ_STATS_BACKLOG_PACKETS, 3959 NL80211_TXQ_STATS_FLOWS, 3960 NL80211_TXQ_STATS_DROPS, 3961 NL80211_TXQ_STATS_ECN_MARKS, 3962 NL80211_TXQ_STATS_OVERLIMIT, 3963 NL80211_TXQ_STATS_OVERMEMORY, 3964 NL80211_TXQ_STATS_COLLISIONS, 3965 NL80211_TXQ_STATS_TX_BYTES, 3966 NL80211_TXQ_STATS_TX_PACKETS, 3967 NL80211_TXQ_STATS_MAX_FLOWS, 3968 3969 /* keep last */ 3970 NUM_NL80211_TXQ_STATS, 3971 NL80211_TXQ_STATS_MAX = NUM_NL80211_TXQ_STATS - 1 3972 }; 3973 3974 /** 3975 * enum nl80211_mpath_flags - nl80211 mesh path flags 3976 * 3977 * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active 3978 * @NL80211_MPATH_FLAG_RESOLVING: the mesh path discovery process is running 3979 * @NL80211_MPATH_FLAG_SN_VALID: the mesh path contains a valid SN 3980 * @NL80211_MPATH_FLAG_FIXED: the mesh path has been manually set 3981 * @NL80211_MPATH_FLAG_RESOLVED: the mesh path discovery process succeeded 3982 */ 3983 enum nl80211_mpath_flags { 3984 NL80211_MPATH_FLAG_ACTIVE = 1<<0, 3985 NL80211_MPATH_FLAG_RESOLVING = 1<<1, 3986 NL80211_MPATH_FLAG_SN_VALID = 1<<2, 3987 NL80211_MPATH_FLAG_FIXED = 1<<3, 3988 NL80211_MPATH_FLAG_RESOLVED = 1<<4, 3989 }; 3990 3991 /** 3992 * enum nl80211_mpath_info - mesh path information 3993 * 3994 * These attribute types are used with %NL80211_ATTR_MPATH_INFO when getting 3995 * information about a mesh path. 3996 * 3997 * @__NL80211_MPATH_INFO_INVALID: attribute number 0 is reserved 3998 * @NL80211_MPATH_INFO_FRAME_QLEN: number of queued frames for this destination 3999 * @NL80211_MPATH_INFO_SN: destination sequence number 4000 * @NL80211_MPATH_INFO_METRIC: metric (cost) of this mesh path 4001 * @NL80211_MPATH_INFO_EXPTIME: expiration time for the path, in msec from now 4002 * @NL80211_MPATH_INFO_FLAGS: mesh path flags, enumerated in 4003 * &enum nl80211_mpath_flags; 4004 * @NL80211_MPATH_INFO_DISCOVERY_TIMEOUT: total path discovery timeout, in msec 4005 * @NL80211_MPATH_INFO_DISCOVERY_RETRIES: mesh path discovery retries 4006 * @NL80211_MPATH_INFO_HOP_COUNT: hop count to destination 4007 * @NL80211_MPATH_INFO_PATH_CHANGE: total number of path changes to destination 4008 * @NL80211_MPATH_INFO_MAX: highest mesh path information attribute number 4009 * currently defined 4010 * @__NL80211_MPATH_INFO_AFTER_LAST: internal use 4011 */ 4012 enum nl80211_mpath_info { 4013 __NL80211_MPATH_INFO_INVALID, 4014 NL80211_MPATH_INFO_FRAME_QLEN, 4015 NL80211_MPATH_INFO_SN, 4016 NL80211_MPATH_INFO_METRIC, 4017 NL80211_MPATH_INFO_EXPTIME, 4018 NL80211_MPATH_INFO_FLAGS, 4019 NL80211_MPATH_INFO_DISCOVERY_TIMEOUT, 4020 NL80211_MPATH_INFO_DISCOVERY_RETRIES, 4021 NL80211_MPATH_INFO_HOP_COUNT, 4022 NL80211_MPATH_INFO_PATH_CHANGE, 4023 4024 /* keep last */ 4025 __NL80211_MPATH_INFO_AFTER_LAST, 4026 NL80211_MPATH_INFO_MAX = __NL80211_MPATH_INFO_AFTER_LAST - 1 4027 }; 4028 4029 /** 4030 * enum nl80211_band_iftype_attr - Interface type data attributes 4031 * 4032 * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved 4033 * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute 4034 * for each interface type that supports the band data 4035 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE 4036 * capabilities IE 4037 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE 4038 * capabilities IE 4039 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE 4040 * capabilities IE 4041 * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as 4042 * defined in HE capabilities IE 4043 * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), 4044 * given for all 6 GHz band channels 4045 * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are 4046 * advertised on this band/for this iftype (binary) 4047 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC: EHT MAC capabilities as in EHT 4048 * capabilities element 4049 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY: EHT PHY capabilities as in EHT 4050 * capabilities element 4051 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET: EHT supported NSS/MCS as in EHT 4052 * capabilities element 4053 * @NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE: EHT PPE thresholds information as 4054 * defined in EHT capabilities element 4055 * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use 4056 * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band attribute currently defined 4057 */ 4058 enum nl80211_band_iftype_attr { 4059 __NL80211_BAND_IFTYPE_ATTR_INVALID, 4060 4061 NL80211_BAND_IFTYPE_ATTR_IFTYPES, 4062 NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC, 4063 NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY, 4064 NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, 4065 NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, 4066 NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, 4067 NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS, 4068 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MAC, 4069 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PHY, 4070 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_MCS_SET, 4071 NL80211_BAND_IFTYPE_ATTR_EHT_CAP_PPE, 4072 4073 /* keep last */ 4074 __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, 4075 NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1 4076 }; 4077 4078 /** 4079 * enum nl80211_band_attr - band attributes 4080 * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved 4081 * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band, 4082 * an array of nested frequency attributes 4083 * @NL80211_BAND_ATTR_RATES: supported bitrates in this band, 4084 * an array of nested bitrate attributes 4085 * @NL80211_BAND_ATTR_HT_MCS_SET: 16-byte attribute containing the MCS set as 4086 * defined in 802.11n 4087 * @NL80211_BAND_ATTR_HT_CAPA: HT capabilities, as in the HT information IE 4088 * @NL80211_BAND_ATTR_HT_AMPDU_FACTOR: A-MPDU factor, as in 11n 4089 * @NL80211_BAND_ATTR_HT_AMPDU_DENSITY: A-MPDU density, as in 11n 4090 * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as 4091 * defined in 802.11ac 4092 * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE 4093 * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using 4094 * attributes from &enum nl80211_band_iftype_attr 4095 * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz 4096 * channel(s) that are allowed to be used for EDMG transmissions. 4097 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. 4098 * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes 4099 * the allowed channel bandwidth configurations. 4100 * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13. 4101 * @NL80211_BAND_ATTR_S1G_MCS_NSS_SET: S1G capabilities, supported S1G-MCS and NSS 4102 * set subfield, as in the S1G information IE, 5 bytes 4103 * @NL80211_BAND_ATTR_S1G_CAPA: S1G capabilities information subfield as in the 4104 * S1G information IE, 10 bytes 4105 * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined 4106 * @__NL80211_BAND_ATTR_AFTER_LAST: internal use 4107 */ 4108 enum nl80211_band_attr { 4109 __NL80211_BAND_ATTR_INVALID, 4110 NL80211_BAND_ATTR_FREQS, 4111 NL80211_BAND_ATTR_RATES, 4112 4113 NL80211_BAND_ATTR_HT_MCS_SET, 4114 NL80211_BAND_ATTR_HT_CAPA, 4115 NL80211_BAND_ATTR_HT_AMPDU_FACTOR, 4116 NL80211_BAND_ATTR_HT_AMPDU_DENSITY, 4117 4118 NL80211_BAND_ATTR_VHT_MCS_SET, 4119 NL80211_BAND_ATTR_VHT_CAPA, 4120 NL80211_BAND_ATTR_IFTYPE_DATA, 4121 4122 NL80211_BAND_ATTR_EDMG_CHANNELS, 4123 NL80211_BAND_ATTR_EDMG_BW_CONFIG, 4124 4125 NL80211_BAND_ATTR_S1G_MCS_NSS_SET, 4126 NL80211_BAND_ATTR_S1G_CAPA, 4127 4128 /* keep last */ 4129 __NL80211_BAND_ATTR_AFTER_LAST, 4130 NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1 4131 }; 4132 4133 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA 4134 4135 /** 4136 * enum nl80211_wmm_rule - regulatory wmm rule 4137 * 4138 * @__NL80211_WMMR_INVALID: attribute number 0 is reserved 4139 * @NL80211_WMMR_CW_MIN: Minimum contention window slot. 4140 * @NL80211_WMMR_CW_MAX: Maximum contention window slot. 4141 * @NL80211_WMMR_AIFSN: Arbitration Inter Frame Space. 4142 * @NL80211_WMMR_TXOP: Maximum allowed tx operation time. 4143 * @nl80211_WMMR_MAX: highest possible wmm rule. 4144 * @__NL80211_WMMR_LAST: Internal use. 4145 */ 4146 enum nl80211_wmm_rule { 4147 __NL80211_WMMR_INVALID, 4148 NL80211_WMMR_CW_MIN, 4149 NL80211_WMMR_CW_MAX, 4150 NL80211_WMMR_AIFSN, 4151 NL80211_WMMR_TXOP, 4152 4153 /* keep last */ 4154 __NL80211_WMMR_LAST, 4155 NL80211_WMMR_MAX = __NL80211_WMMR_LAST - 1 4156 }; 4157 4158 /** 4159 * enum nl80211_frequency_attr - frequency attributes 4160 * @__NL80211_FREQUENCY_ATTR_INVALID: attribute number 0 is reserved 4161 * @NL80211_FREQUENCY_ATTR_FREQ: Frequency in MHz 4162 * @NL80211_FREQUENCY_ATTR_DISABLED: Channel is disabled in current 4163 * regulatory domain. 4164 * @NL80211_FREQUENCY_ATTR_NO_IR: no mechanisms that initiate radiation 4165 * are permitted on this channel, this includes sending probe 4166 * requests, or modes of operation that require beaconing. 4167 * @NL80211_FREQUENCY_ATTR_RADAR: Radar detection is mandatory 4168 * on this channel in current regulatory domain. 4169 * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm 4170 * (100 * dBm). 4171 * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS 4172 * (enum nl80211_dfs_state) 4173 * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long 4174 * this channel is in this DFS state. 4175 * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this 4176 * channel as the control channel 4177 * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this 4178 * channel as the control channel 4179 * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel 4180 * as the primary or any of the secondary channels isn't possible, 4181 * this includes 80+80 channels 4182 * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel 4183 * using this channel as the primary or any of the secondary channels 4184 * isn't possible 4185 * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. 4186 * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this 4187 * channel. A channel that has the INDOOR_ONLY attribute can only be 4188 * used when there is a clear assessment that the device is operating in 4189 * an indoor surroundings, i.e., it is connected to AC power (and not 4190 * through portable DC inverters) or is under the control of a master 4191 * that is acting as an AP and is connected to AC power. 4192 * @NL80211_FREQUENCY_ATTR_IR_CONCURRENT: IR operation is allowed on this 4193 * channel if it's connected concurrently to a BSS on the same channel on 4194 * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz 4195 * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO or TDLS 4196 * off-channel on a channel that has the IR_CONCURRENT attribute set can be 4197 * done when there is a clear assessment that the device is operating under 4198 * the guidance of an authorized master, i.e., setting up a GO or TDLS 4199 * off-channel while the device is also connected to an AP with DFS and 4200 * radar detection on the UNII band (it is up to user-space, i.e., 4201 * wpa_supplicant to perform the required verifications). Using this 4202 * attribute for IR is disallowed for master interfaces (IBSS, AP). 4203 * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed 4204 * on this channel in current regulatory domain. 4205 * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed 4206 * on this channel in current regulatory domain. 4207 * @NL80211_FREQUENCY_ATTR_WMM: this channel has wmm limitations. 4208 * This is a nested attribute that contains the wmm limitation per AC. 4209 * (see &enum nl80211_wmm_rule) 4210 * @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel 4211 * in current regulatory domain. 4212 * @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz 4213 * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed 4214 * on this channel in current regulatory domain. 4215 * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed 4216 * on this channel in current regulatory domain. 4217 * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed 4218 * on this channel in current regulatory domain. 4219 * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed 4220 * on this channel in current regulatory domain. 4221 * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed 4222 * on this channel in current regulatory domain. 4223 * @NL80211_FREQUENCY_ATTR_NO_320MHZ: any 320 MHz channel using this channel 4224 * as the primary or any of the secondary channels isn't possible 4225 * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel 4226 * in current regulatory domain. 4227 * @NL80211_FREQUENCY_ATTR_PSD: Power spectral density (in dBm) that 4228 * is allowed on this channel in current regulatory domain. 4229 * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number 4230 * currently defined 4231 * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use 4232 * 4233 * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 4234 * for more information on the FCC description of the relaxations allowed 4235 * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and 4236 * NL80211_FREQUENCY_ATTR_IR_CONCURRENT. 4237 */ 4238 enum nl80211_frequency_attr { 4239 __NL80211_FREQUENCY_ATTR_INVALID, 4240 NL80211_FREQUENCY_ATTR_FREQ, 4241 NL80211_FREQUENCY_ATTR_DISABLED, 4242 NL80211_FREQUENCY_ATTR_NO_IR, 4243 __NL80211_FREQUENCY_ATTR_NO_IBSS, 4244 NL80211_FREQUENCY_ATTR_RADAR, 4245 NL80211_FREQUENCY_ATTR_MAX_TX_POWER, 4246 NL80211_FREQUENCY_ATTR_DFS_STATE, 4247 NL80211_FREQUENCY_ATTR_DFS_TIME, 4248 NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, 4249 NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, 4250 NL80211_FREQUENCY_ATTR_NO_80MHZ, 4251 NL80211_FREQUENCY_ATTR_NO_160MHZ, 4252 NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, 4253 NL80211_FREQUENCY_ATTR_INDOOR_ONLY, 4254 NL80211_FREQUENCY_ATTR_IR_CONCURRENT, 4255 NL80211_FREQUENCY_ATTR_NO_20MHZ, 4256 NL80211_FREQUENCY_ATTR_NO_10MHZ, 4257 NL80211_FREQUENCY_ATTR_WMM, 4258 NL80211_FREQUENCY_ATTR_NO_HE, 4259 NL80211_FREQUENCY_ATTR_OFFSET, 4260 NL80211_FREQUENCY_ATTR_1MHZ, 4261 NL80211_FREQUENCY_ATTR_2MHZ, 4262 NL80211_FREQUENCY_ATTR_4MHZ, 4263 NL80211_FREQUENCY_ATTR_8MHZ, 4264 NL80211_FREQUENCY_ATTR_16MHZ, 4265 NL80211_FREQUENCY_ATTR_NO_320MHZ, 4266 NL80211_FREQUENCY_ATTR_NO_EHT, 4267 NL80211_FREQUENCY_ATTR_PSD, 4268 4269 /* keep last */ 4270 __NL80211_FREQUENCY_ATTR_AFTER_LAST, 4271 NL80211_FREQUENCY_ATTR_MAX = __NL80211_FREQUENCY_ATTR_AFTER_LAST - 1 4272 }; 4273 4274 #define NL80211_FREQUENCY_ATTR_MAX_TX_POWER NL80211_FREQUENCY_ATTR_MAX_TX_POWER 4275 #define NL80211_FREQUENCY_ATTR_PASSIVE_SCAN NL80211_FREQUENCY_ATTR_NO_IR 4276 #define NL80211_FREQUENCY_ATTR_NO_IBSS NL80211_FREQUENCY_ATTR_NO_IR 4277 #define NL80211_FREQUENCY_ATTR_NO_IR NL80211_FREQUENCY_ATTR_NO_IR 4278 #define NL80211_FREQUENCY_ATTR_GO_CONCURRENT \ 4279 NL80211_FREQUENCY_ATTR_IR_CONCURRENT 4280 4281 /** 4282 * enum nl80211_bitrate_attr - bitrate attributes 4283 * @__NL80211_BITRATE_ATTR_INVALID: attribute number 0 is reserved 4284 * @NL80211_BITRATE_ATTR_RATE: Bitrate in units of 100 kbps 4285 * @NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE: Short preamble supported 4286 * in 2.4 GHz band. 4287 * @NL80211_BITRATE_ATTR_MAX: highest bitrate attribute number 4288 * currently defined 4289 * @__NL80211_BITRATE_ATTR_AFTER_LAST: internal use 4290 */ 4291 enum nl80211_bitrate_attr { 4292 __NL80211_BITRATE_ATTR_INVALID, 4293 NL80211_BITRATE_ATTR_RATE, 4294 NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE, 4295 4296 /* keep last */ 4297 __NL80211_BITRATE_ATTR_AFTER_LAST, 4298 NL80211_BITRATE_ATTR_MAX = __NL80211_BITRATE_ATTR_AFTER_LAST - 1 4299 }; 4300 4301 /** 4302 * enum nl80211_initiator - Indicates the initiator of a reg domain request 4303 * @NL80211_REGDOM_SET_BY_CORE: Core queried CRDA for a dynamic world 4304 * regulatory domain. 4305 * @NL80211_REGDOM_SET_BY_USER: User asked the wireless core to set the 4306 * regulatory domain. 4307 * @NL80211_REGDOM_SET_BY_DRIVER: a wireless drivers has hinted to the 4308 * wireless core it thinks its knows the regulatory domain we should be in. 4309 * @NL80211_REGDOM_SET_BY_COUNTRY_IE: the wireless core has received an 4310 * 802.11 country information element with regulatory information it 4311 * thinks we should consider. cfg80211 only processes the country 4312 * code from the IE, and relies on the regulatory domain information 4313 * structure passed by userspace (CRDA) from our wireless-regdb. 4314 * If a channel is enabled but the country code indicates it should 4315 * be disabled we disable the channel and re-enable it upon disassociation. 4316 */ 4317 enum nl80211_reg_initiator { 4318 NL80211_REGDOM_SET_BY_CORE, 4319 NL80211_REGDOM_SET_BY_USER, 4320 NL80211_REGDOM_SET_BY_DRIVER, 4321 NL80211_REGDOM_SET_BY_COUNTRY_IE, 4322 }; 4323 4324 /** 4325 * enum nl80211_reg_type - specifies the type of regulatory domain 4326 * @NL80211_REGDOM_TYPE_COUNTRY: the regulatory domain set is one that pertains 4327 * to a specific country. When this is set you can count on the 4328 * ISO / IEC 3166 alpha2 country code being valid. 4329 * @NL80211_REGDOM_TYPE_WORLD: the regulatory set domain is the world regulatory 4330 * domain. 4331 * @NL80211_REGDOM_TYPE_CUSTOM_WORLD: the regulatory domain set is a custom 4332 * driver specific world regulatory domain. These do not apply system-wide 4333 * and are only applicable to the individual devices which have requested 4334 * them to be applied. 4335 * @NL80211_REGDOM_TYPE_INTERSECTION: the regulatory domain set is the product 4336 * of an intersection between two regulatory domains -- the previously 4337 * set regulatory domain on the system and the last accepted regulatory 4338 * domain request to be processed. 4339 */ 4340 enum nl80211_reg_type { 4341 NL80211_REGDOM_TYPE_COUNTRY, 4342 NL80211_REGDOM_TYPE_WORLD, 4343 NL80211_REGDOM_TYPE_CUSTOM_WORLD, 4344 NL80211_REGDOM_TYPE_INTERSECTION, 4345 }; 4346 4347 /** 4348 * enum nl80211_reg_rule_attr - regulatory rule attributes 4349 * @__NL80211_REG_RULE_ATTR_INVALID: attribute number 0 is reserved 4350 * @NL80211_ATTR_REG_RULE_FLAGS: a set of flags which specify additional 4351 * considerations for a given frequency range. These are the 4352 * &enum nl80211_reg_rule_flags. 4353 * @NL80211_ATTR_FREQ_RANGE_START: starting frequencry for the regulatory 4354 * rule in KHz. This is not a center of frequency but an actual regulatory 4355 * band edge. 4356 * @NL80211_ATTR_FREQ_RANGE_END: ending frequency for the regulatory rule 4357 * in KHz. This is not a center a frequency but an actual regulatory 4358 * band edge. 4359 * @NL80211_ATTR_FREQ_RANGE_MAX_BW: maximum allowed bandwidth for this 4360 * frequency range, in KHz. 4361 * @NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN: the maximum allowed antenna gain 4362 * for a given frequency range. The value is in mBi (100 * dBi). 4363 * If you don't have one then don't send this. 4364 * @NL80211_ATTR_POWER_RULE_MAX_EIRP: the maximum allowed EIRP for 4365 * a given frequency range. The value is in mBm (100 * dBm). 4366 * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. 4367 * If not present or 0 default CAC time will be used. 4368 * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm). 4369 * This could be negative. 4370 * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number 4371 * currently defined 4372 * @__NL80211_REG_RULE_ATTR_AFTER_LAST: internal use 4373 */ 4374 enum nl80211_reg_rule_attr { 4375 __NL80211_REG_RULE_ATTR_INVALID, 4376 NL80211_ATTR_REG_RULE_FLAGS, 4377 4378 NL80211_ATTR_FREQ_RANGE_START, 4379 NL80211_ATTR_FREQ_RANGE_END, 4380 NL80211_ATTR_FREQ_RANGE_MAX_BW, 4381 4382 NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN, 4383 NL80211_ATTR_POWER_RULE_MAX_EIRP, 4384 4385 NL80211_ATTR_DFS_CAC_TIME, 4386 4387 NL80211_ATTR_POWER_RULE_PSD, 4388 4389 /* keep last */ 4390 __NL80211_REG_RULE_ATTR_AFTER_LAST, 4391 NL80211_REG_RULE_ATTR_MAX = __NL80211_REG_RULE_ATTR_AFTER_LAST - 1 4392 }; 4393 4394 /** 4395 * enum nl80211_sched_scan_match_attr - scheduled scan match attributes 4396 * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved 4397 * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, 4398 * only report BSS with matching SSID. 4399 * (This cannot be used together with BSSID.) 4400 * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a 4401 * BSS in scan results. Filtering is turned off if not specified. Note that 4402 * if this attribute is in a match set of its own, then it is treated as 4403 * the default value for all matchsets with an SSID, rather than being a 4404 * matchset of its own without an RSSI filter. This is due to problems with 4405 * how this API was implemented in the past. Also, due to the same problem, 4406 * the only way to create a matchset with only an RSSI filter (with this 4407 * attribute) is if there's only a single matchset with the RSSI attribute. 4408 * @NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI: Flag indicating whether 4409 * %NL80211_SCHED_SCAN_MATCH_ATTR_RSSI to be used as absolute RSSI or 4410 * relative to current bss's RSSI. 4411 * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST: When present the RSSI level for 4412 * BSS-es in the specified band is to be adjusted before doing 4413 * RSSI-based BSS selection. The attribute value is a packed structure 4414 * value as specified by &struct nl80211_bss_select_rssi_adjust. 4415 * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching 4416 * (this cannot be used together with SSID). 4417 * @NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI: Nested attribute that carries the 4418 * band specific minimum rssi thresholds for the bands defined in 4419 * enum nl80211_band. The minimum rssi threshold value(s32) specific to a 4420 * band shall be encapsulated in attribute with type value equals to one 4421 * of the NL80211_BAND_* defined in enum nl80211_band. For example, the 4422 * minimum rssi threshold value for 2.4GHZ band shall be encapsulated 4423 * within an attribute of type NL80211_BAND_2GHZ. And one or more of such 4424 * attributes will be nested within this attribute. 4425 * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter 4426 * attribute number currently defined 4427 * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use 4428 */ 4429 enum nl80211_sched_scan_match_attr { 4430 __NL80211_SCHED_SCAN_MATCH_ATTR_INVALID, 4431 4432 NL80211_SCHED_SCAN_MATCH_ATTR_SSID, 4433 NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, 4434 NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, 4435 NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, 4436 NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, 4437 NL80211_SCHED_SCAN_MATCH_PER_BAND_RSSI, 4438 4439 /* keep last */ 4440 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, 4441 NL80211_SCHED_SCAN_MATCH_ATTR_MAX = 4442 __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST - 1 4443 }; 4444 4445 /* only for backward compatibility */ 4446 #define NL80211_ATTR_SCHED_SCAN_MATCH_SSID NL80211_SCHED_SCAN_MATCH_ATTR_SSID 4447 4448 /** 4449 * enum nl80211_reg_rule_flags - regulatory rule flags 4450 * 4451 * @NL80211_RRF_NO_OFDM: OFDM modulation not allowed 4452 * @NL80211_RRF_NO_CCK: CCK modulation not allowed 4453 * @NL80211_RRF_NO_INDOOR: indoor operation not allowed 4454 * @NL80211_RRF_NO_OUTDOOR: outdoor operation not allowed 4455 * @NL80211_RRF_DFS: DFS support is required to be used 4456 * @NL80211_RRF_PTP_ONLY: this is only for Point To Point links 4457 * @NL80211_RRF_PTMP_ONLY: this is only for Point To Multi Point links 4458 * @NL80211_RRF_NO_IR: no mechanisms that initiate radiation are allowed, 4459 * this includes probe requests or modes of operation that require 4460 * beaconing. 4461 * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated 4462 * base on contiguous rules and wider channels will be allowed to cross 4463 * multiple contiguous/overlapping frequency ranges. 4464 * @NL80211_RRF_IR_CONCURRENT: See %NL80211_FREQUENCY_ATTR_IR_CONCURRENT 4465 * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation 4466 * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation 4467 * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed 4468 * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed 4469 * @NL80211_RRF_NO_HE: HE operation not allowed 4470 * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed 4471 * @NL80211_RRF_NO_EHT: EHT operation not allowed 4472 * @NL80211_RRF_PSD: Ruleset has power spectral density value 4473 */ 4474 enum nl80211_reg_rule_flags { 4475 NL80211_RRF_NO_OFDM = 1<<0, 4476 NL80211_RRF_NO_CCK = 1<<1, 4477 NL80211_RRF_NO_INDOOR = 1<<2, 4478 NL80211_RRF_NO_OUTDOOR = 1<<3, 4479 NL80211_RRF_DFS = 1<<4, 4480 NL80211_RRF_PTP_ONLY = 1<<5, 4481 NL80211_RRF_PTMP_ONLY = 1<<6, 4482 NL80211_RRF_NO_IR = 1<<7, 4483 __NL80211_RRF_NO_IBSS = 1<<8, 4484 NL80211_RRF_AUTO_BW = 1<<11, 4485 NL80211_RRF_IR_CONCURRENT = 1<<12, 4486 NL80211_RRF_NO_HT40MINUS = 1<<13, 4487 NL80211_RRF_NO_HT40PLUS = 1<<14, 4488 NL80211_RRF_NO_80MHZ = 1<<15, 4489 NL80211_RRF_NO_160MHZ = 1<<16, 4490 NL80211_RRF_NO_HE = 1<<17, 4491 NL80211_RRF_NO_320MHZ = 1<<18, 4492 NL80211_RRF_NO_EHT = 1<<19, 4493 NL80211_RRF_PSD = 1<<20, 4494 }; 4495 4496 #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR 4497 #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR 4498 #define NL80211_RRF_NO_IR NL80211_RRF_NO_IR 4499 #define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ 4500 NL80211_RRF_NO_HT40PLUS) 4501 #define NL80211_RRF_GO_CONCURRENT NL80211_RRF_IR_CONCURRENT 4502 4503 /* For backport compatibility with older userspace */ 4504 #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) 4505 4506 /** 4507 * enum nl80211_dfs_regions - regulatory DFS regions 4508 * 4509 * @NL80211_DFS_UNSET: Country has no DFS master region specified 4510 * @NL80211_DFS_FCC: Country follows DFS master rules from FCC 4511 * @NL80211_DFS_ETSI: Country follows DFS master rules from ETSI 4512 * @NL80211_DFS_JP: Country follows DFS master rules from JP/MKK/Telec 4513 */ 4514 enum nl80211_dfs_regions { 4515 NL80211_DFS_UNSET = 0, 4516 NL80211_DFS_FCC = 1, 4517 NL80211_DFS_ETSI = 2, 4518 NL80211_DFS_JP = 3, 4519 }; 4520 4521 /** 4522 * enum nl80211_user_reg_hint_type - type of user regulatory hint 4523 * 4524 * @NL80211_USER_REG_HINT_USER: a user sent the hint. This is always 4525 * assumed if the attribute is not set. 4526 * @NL80211_USER_REG_HINT_CELL_BASE: the hint comes from a cellular 4527 * base station. Device drivers that have been tested to work 4528 * properly to support this type of hint can enable these hints 4529 * by setting the NL80211_FEATURE_CELL_BASE_REG_HINTS feature 4530 * capability on the struct wiphy. The wireless core will 4531 * ignore all cell base station hints until at least one device 4532 * present has been registered with the wireless core that 4533 * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a 4534 * supported feature. 4535 * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the 4536 * platform is operating in an indoor environment. 4537 */ 4538 enum nl80211_user_reg_hint_type { 4539 NL80211_USER_REG_HINT_USER = 0, 4540 NL80211_USER_REG_HINT_CELL_BASE = 1, 4541 NL80211_USER_REG_HINT_INDOOR = 2, 4542 }; 4543 4544 /** 4545 * enum nl80211_survey_info - survey information 4546 * 4547 * These attribute types are used with %NL80211_ATTR_SURVEY_INFO 4548 * when getting information about a survey. 4549 * 4550 * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved 4551 * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel 4552 * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) 4553 * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used 4554 * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio 4555 * was turned on (on channel or globally) 4556 * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary 4557 * channel was sensed busy (either due to activity or energy detect) 4558 * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension 4559 * channel was sensed busy 4560 * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent 4561 * receiving data (on channel or globally) 4562 * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent 4563 * transmitting data (on channel or globally) 4564 * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan 4565 * (on this channel or globally) 4566 * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment 4567 * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent 4568 * receiving frames destined to the local BSS 4569 * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number 4570 * currently defined 4571 * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz 4572 * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use 4573 */ 4574 enum nl80211_survey_info { 4575 __NL80211_SURVEY_INFO_INVALID, 4576 NL80211_SURVEY_INFO_FREQUENCY, 4577 NL80211_SURVEY_INFO_NOISE, 4578 NL80211_SURVEY_INFO_IN_USE, 4579 NL80211_SURVEY_INFO_TIME, 4580 NL80211_SURVEY_INFO_TIME_BUSY, 4581 NL80211_SURVEY_INFO_TIME_EXT_BUSY, 4582 NL80211_SURVEY_INFO_TIME_RX, 4583 NL80211_SURVEY_INFO_TIME_TX, 4584 NL80211_SURVEY_INFO_TIME_SCAN, 4585 NL80211_SURVEY_INFO_PAD, 4586 NL80211_SURVEY_INFO_TIME_BSS_RX, 4587 NL80211_SURVEY_INFO_FREQUENCY_OFFSET, 4588 4589 /* keep last */ 4590 __NL80211_SURVEY_INFO_AFTER_LAST, 4591 NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 4592 }; 4593 4594 /* keep old names for compatibility */ 4595 #define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME 4596 #define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY 4597 #define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY 4598 #define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX 4599 #define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX 4600 4601 /** 4602 * enum nl80211_mntr_flags - monitor configuration flags 4603 * 4604 * Monitor configuration flags. 4605 * 4606 * @__NL80211_MNTR_FLAG_INVALID: reserved 4607 * 4608 * @NL80211_MNTR_FLAG_FCSFAIL: pass frames with bad FCS 4609 * @NL80211_MNTR_FLAG_PLCPFAIL: pass frames with bad PLCP 4610 * @NL80211_MNTR_FLAG_CONTROL: pass control frames 4611 * @NL80211_MNTR_FLAG_OTHER_BSS: disable BSSID filtering 4612 * @NL80211_MNTR_FLAG_COOK_FRAMES: report frames after processing. 4613 * overrides all other flags. 4614 * @NL80211_MNTR_FLAG_ACTIVE: use the configured MAC address 4615 * and ACK incoming unicast packets. 4616 * 4617 * @__NL80211_MNTR_FLAG_AFTER_LAST: internal use 4618 * @NL80211_MNTR_FLAG_MAX: highest possible monitor flag 4619 */ 4620 enum nl80211_mntr_flags { 4621 __NL80211_MNTR_FLAG_INVALID, 4622 NL80211_MNTR_FLAG_FCSFAIL, 4623 NL80211_MNTR_FLAG_PLCPFAIL, 4624 NL80211_MNTR_FLAG_CONTROL, 4625 NL80211_MNTR_FLAG_OTHER_BSS, 4626 NL80211_MNTR_FLAG_COOK_FRAMES, 4627 NL80211_MNTR_FLAG_ACTIVE, 4628 4629 /* keep last */ 4630 __NL80211_MNTR_FLAG_AFTER_LAST, 4631 NL80211_MNTR_FLAG_MAX = __NL80211_MNTR_FLAG_AFTER_LAST - 1 4632 }; 4633 4634 /** 4635 * enum nl80211_mesh_power_mode - mesh power save modes 4636 * 4637 * @NL80211_MESH_POWER_UNKNOWN: The mesh power mode of the mesh STA is 4638 * not known or has not been set yet. 4639 * @NL80211_MESH_POWER_ACTIVE: Active mesh power mode. The mesh STA is 4640 * in Awake state all the time. 4641 * @NL80211_MESH_POWER_LIGHT_SLEEP: Light sleep mode. The mesh STA will 4642 * alternate between Active and Doze states, but will wake up for 4643 * neighbor's beacons. 4644 * @NL80211_MESH_POWER_DEEP_SLEEP: Deep sleep mode. The mesh STA will 4645 * alternate between Active and Doze states, but may not wake up 4646 * for neighbor's beacons. 4647 * 4648 * @__NL80211_MESH_POWER_AFTER_LAST - internal use 4649 * @NL80211_MESH_POWER_MAX - highest possible power save level 4650 */ 4651 4652 enum nl80211_mesh_power_mode { 4653 NL80211_MESH_POWER_UNKNOWN, 4654 NL80211_MESH_POWER_ACTIVE, 4655 NL80211_MESH_POWER_LIGHT_SLEEP, 4656 NL80211_MESH_POWER_DEEP_SLEEP, 4657 4658 __NL80211_MESH_POWER_AFTER_LAST, 4659 NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1 4660 }; 4661 4662 /** 4663 * enum nl80211_meshconf_params - mesh configuration parameters 4664 * 4665 * Mesh configuration parameters. These can be changed while the mesh is 4666 * active. 4667 * 4668 * @__NL80211_MESHCONF_INVALID: internal use 4669 * 4670 * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in 4671 * millisecond units, used by the Peer Link Open message 4672 * 4673 * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in 4674 * millisecond units, used by the peer link management to close a peer link 4675 * 4676 * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in 4677 * millisecond units 4678 * 4679 * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed 4680 * on this mesh interface 4681 * 4682 * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link 4683 * open retries that can be sent to establish a new peer link instance in a 4684 * mesh 4685 * 4686 * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh 4687 * point. 4688 * 4689 * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically open 4690 * peer links when we detect compatible mesh peers. Disabled if 4691 * @NL80211_MESH_SETUP_USERSPACE_MPM or @NL80211_MESH_SETUP_USERSPACE_AMPE are 4692 * set. 4693 * 4694 * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames 4695 * containing a PREQ that an MP can send to a particular destination (path 4696 * target) 4697 * 4698 * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths 4699 * (in milliseconds) 4700 * 4701 * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait 4702 * until giving up on a path discovery (in milliseconds) 4703 * 4704 * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh 4705 * points receiving a PREQ shall consider the forwarding information from 4706 * the root to be valid. (TU = time unit) 4707 * 4708 * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in 4709 * TUs) during which an MP can send only one action frame containing a PREQ 4710 * reference element 4711 * 4712 * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) 4713 * that it takes for an HWMP information element to propagate across the 4714 * mesh 4715 * 4716 * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not 4717 * 4718 * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a 4719 * source mesh point for path selection elements. 4720 * 4721 * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between 4722 * root announcements are transmitted. 4723 * 4724 * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has 4725 * access to a broader network beyond the MBSS. This is done via Root 4726 * Announcement frames. 4727 * 4728 * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in 4729 * TUs) during which a mesh STA can send only one Action frame containing a 4730 * PERR element. 4731 * 4732 * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding 4733 * or forwarding entity (default is TRUE - forwarding entity) 4734 * 4735 * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the 4736 * threshold for average signal strength of candidate station to establish 4737 * a peer link. 4738 * 4739 * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors 4740 * to synchronize to for 11s default synchronization method 4741 * (see 11C.12.2.2) 4742 * 4743 * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. 4744 * 4745 * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute 4746 * 4747 * @NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT: The time (in TUs) for 4748 * which mesh STAs receiving a proactive PREQ shall consider the forwarding 4749 * information to the root mesh STA to be valid. 4750 * 4751 * @NL80211_MESHCONF_HWMP_ROOT_INTERVAL: The interval of time (in TUs) between 4752 * proactive PREQs are transmitted. 4753 * 4754 * @NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL: The minimum interval of time 4755 * (in TUs) during which a mesh STA can send only one Action frame 4756 * containing a PREQ element for root path confirmation. 4757 * 4758 * @NL80211_MESHCONF_POWER_MODE: Default mesh power mode for new peer links. 4759 * type &enum nl80211_mesh_power_mode (u32) 4760 * 4761 * @NL80211_MESHCONF_AWAKE_WINDOW: awake window duration (in TUs) 4762 * 4763 * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've 4764 * established peering with for longer than this time (in seconds), then 4765 * remove it from the STA's list of peers. You may set this to 0 to disable 4766 * the removal of the STA. Default is 30 minutes. 4767 * 4768 * @NL80211_MESHCONF_CONNECTED_TO_GATE: If set to true then this mesh STA 4769 * will advertise that it is connected to a gate in the mesh formation 4770 * field. If left unset then the mesh formation field will only 4771 * advertise such if there is an active root mesh path. 4772 * 4773 * @NL80211_MESHCONF_NOLEARN: Try to avoid multi-hop path discovery (e.g. 4774 * PREQ/PREP for HWMP) if the destination is a direct neighbor. Note that 4775 * this might not be the optimal decision as a multi-hop route might be 4776 * better. So if using this setting you will likely also want to disable 4777 * dot11MeshForwarding and use another mesh routing protocol on top. 4778 * 4779 * @NL80211_MESHCONF_CONNECTED_TO_AS: If set to true then this mesh STA 4780 * will advertise that it is connected to a authentication server 4781 * in the mesh formation field. 4782 * 4783 * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use 4784 */ 4785 enum nl80211_meshconf_params { 4786 __NL80211_MESHCONF_INVALID, 4787 NL80211_MESHCONF_RETRY_TIMEOUT, 4788 NL80211_MESHCONF_CONFIRM_TIMEOUT, 4789 NL80211_MESHCONF_HOLDING_TIMEOUT, 4790 NL80211_MESHCONF_MAX_PEER_LINKS, 4791 NL80211_MESHCONF_MAX_RETRIES, 4792 NL80211_MESHCONF_TTL, 4793 NL80211_MESHCONF_AUTO_OPEN_PLINKS, 4794 NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, 4795 NL80211_MESHCONF_PATH_REFRESH_TIME, 4796 NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, 4797 NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, 4798 NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, 4799 NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, 4800 NL80211_MESHCONF_HWMP_ROOTMODE, 4801 NL80211_MESHCONF_ELEMENT_TTL, 4802 NL80211_MESHCONF_HWMP_RANN_INTERVAL, 4803 NL80211_MESHCONF_GATE_ANNOUNCEMENTS, 4804 NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, 4805 NL80211_MESHCONF_FORWARDING, 4806 NL80211_MESHCONF_RSSI_THRESHOLD, 4807 NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, 4808 NL80211_MESHCONF_HT_OPMODE, 4809 NL80211_MESHCONF_HWMP_PATH_TO_ROOT_TIMEOUT, 4810 NL80211_MESHCONF_HWMP_ROOT_INTERVAL, 4811 NL80211_MESHCONF_HWMP_CONFIRMATION_INTERVAL, 4812 NL80211_MESHCONF_POWER_MODE, 4813 NL80211_MESHCONF_AWAKE_WINDOW, 4814 NL80211_MESHCONF_PLINK_TIMEOUT, 4815 NL80211_MESHCONF_CONNECTED_TO_GATE, 4816 NL80211_MESHCONF_NOLEARN, 4817 NL80211_MESHCONF_CONNECTED_TO_AS, 4818 4819 /* keep last */ 4820 __NL80211_MESHCONF_ATTR_AFTER_LAST, 4821 NL80211_MESHCONF_ATTR_MAX = __NL80211_MESHCONF_ATTR_AFTER_LAST - 1 4822 }; 4823 4824 /** 4825 * enum nl80211_mesh_setup_params - mesh setup parameters 4826 * 4827 * Mesh setup parameters. These are used to start/join a mesh and cannot be 4828 * changed while the mesh is active. 4829 * 4830 * @__NL80211_MESH_SETUP_INVALID: Internal use 4831 * 4832 * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a 4833 * vendor specific path selection algorithm or disable it to use the 4834 * default HWMP. 4835 * 4836 * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a 4837 * vendor specific path metric or disable it to use the default Airtime 4838 * metric. 4839 * 4840 * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a 4841 * robust security network ie, or a vendor specific information element 4842 * that vendors will use to identify the path selection methods and 4843 * metrics in use. 4844 * 4845 * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication 4846 * daemon will be authenticating mesh candidates. 4847 * 4848 * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication 4849 * daemon will be securing peer link frames. AMPE is a secured version of 4850 * Mesh Peering Management (MPM) and is implemented with the assistance of 4851 * a userspace daemon. When this flag is set, the kernel will send peer 4852 * management frames to a userspace daemon that will implement AMPE 4853 * functionality (security capabilities selection, key confirmation, and 4854 * key management). When the flag is unset (default), the kernel can 4855 * autonomously complete (unsecured) mesh peering without the need of a 4856 * userspace daemon. 4857 * 4858 * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a 4859 * vendor specific synchronization method or disable it to use the default 4860 * neighbor offset synchronization 4861 * 4862 * @NL80211_MESH_SETUP_USERSPACE_MPM: Enable this option if userspace will 4863 * implement an MPM which handles peer allocation and state. 4864 * 4865 * @NL80211_MESH_SETUP_AUTH_PROTOCOL: Inform the kernel of the authentication 4866 * method (u8, as defined in IEEE 8.4.2.100.6, e.g. 0x1 for SAE). 4867 * Default is no authentication method required. 4868 * 4869 * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number 4870 * 4871 * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use 4872 */ 4873 enum nl80211_mesh_setup_params { 4874 __NL80211_MESH_SETUP_INVALID, 4875 NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL, 4876 NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC, 4877 NL80211_MESH_SETUP_IE, 4878 NL80211_MESH_SETUP_USERSPACE_AUTH, 4879 NL80211_MESH_SETUP_USERSPACE_AMPE, 4880 NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC, 4881 NL80211_MESH_SETUP_USERSPACE_MPM, 4882 NL80211_MESH_SETUP_AUTH_PROTOCOL, 4883 4884 /* keep last */ 4885 __NL80211_MESH_SETUP_ATTR_AFTER_LAST, 4886 NL80211_MESH_SETUP_ATTR_MAX = __NL80211_MESH_SETUP_ATTR_AFTER_LAST - 1 4887 }; 4888 4889 /** 4890 * enum nl80211_txq_attr - TX queue parameter attributes 4891 * @__NL80211_TXQ_ATTR_INVALID: Attribute number 0 is reserved 4892 * @NL80211_TXQ_ATTR_AC: AC identifier (NL80211_AC_*) 4893 * @NL80211_TXQ_ATTR_TXOP: Maximum burst time in units of 32 usecs, 0 meaning 4894 * disabled 4895 * @NL80211_TXQ_ATTR_CWMIN: Minimum contention window [a value of the form 4896 * 2^n-1 in the range 1..32767] 4897 * @NL80211_TXQ_ATTR_CWMAX: Maximum contention window [a value of the form 4898 * 2^n-1 in the range 1..32767] 4899 * @NL80211_TXQ_ATTR_AIFS: Arbitration interframe space [0..255] 4900 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal 4901 * @NL80211_TXQ_ATTR_MAX: Maximum TXQ attribute number 4902 */ 4903 enum nl80211_txq_attr { 4904 __NL80211_TXQ_ATTR_INVALID, 4905 NL80211_TXQ_ATTR_AC, 4906 NL80211_TXQ_ATTR_TXOP, 4907 NL80211_TXQ_ATTR_CWMIN, 4908 NL80211_TXQ_ATTR_CWMAX, 4909 NL80211_TXQ_ATTR_AIFS, 4910 4911 /* keep last */ 4912 __NL80211_TXQ_ATTR_AFTER_LAST, 4913 NL80211_TXQ_ATTR_MAX = __NL80211_TXQ_ATTR_AFTER_LAST - 1 4914 }; 4915 4916 enum nl80211_ac { 4917 NL80211_AC_VO, 4918 NL80211_AC_VI, 4919 NL80211_AC_BE, 4920 NL80211_AC_BK, 4921 NL80211_NUM_ACS 4922 }; 4923 4924 /* backward compat */ 4925 #define NL80211_TXQ_ATTR_QUEUE NL80211_TXQ_ATTR_AC 4926 #define NL80211_TXQ_Q_VO NL80211_AC_VO 4927 #define NL80211_TXQ_Q_VI NL80211_AC_VI 4928 #define NL80211_TXQ_Q_BE NL80211_AC_BE 4929 #define NL80211_TXQ_Q_BK NL80211_AC_BK 4930 4931 /** 4932 * enum nl80211_channel_type - channel type 4933 * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel 4934 * @NL80211_CHAN_HT20: 20 MHz HT channel 4935 * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel 4936 * below the control channel 4937 * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel 4938 * above the control channel 4939 */ 4940 enum nl80211_channel_type { 4941 NL80211_CHAN_NO_HT, 4942 NL80211_CHAN_HT20, 4943 NL80211_CHAN_HT40MINUS, 4944 NL80211_CHAN_HT40PLUS 4945 }; 4946 4947 /** 4948 * enum nl80211_key_mode - Key mode 4949 * 4950 * @NL80211_KEY_RX_TX: (Default) 4951 * Key can be used for Rx and Tx immediately 4952 * 4953 * The following modes can only be selected for unicast keys and when the 4954 * driver supports @NL80211_EXT_FEATURE_EXT_KEY_ID: 4955 * 4956 * @NL80211_KEY_NO_TX: Only allowed in combination with @NL80211_CMD_NEW_KEY: 4957 * Unicast key can only be used for Rx, Tx not allowed, yet 4958 * @NL80211_KEY_SET_TX: Only allowed in combination with @NL80211_CMD_SET_KEY: 4959 * The unicast key identified by idx and mac is cleared for Tx and becomes 4960 * the preferred Tx key for the station. 4961 */ 4962 enum nl80211_key_mode { 4963 NL80211_KEY_RX_TX, 4964 NL80211_KEY_NO_TX, 4965 NL80211_KEY_SET_TX 4966 }; 4967 4968 /** 4969 * enum nl80211_chan_width - channel width definitions 4970 * 4971 * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH 4972 * attribute. 4973 * 4974 * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel 4975 * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel 4976 * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 4977 * attribute must be provided as well 4978 * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 4979 * attribute must be provided as well 4980 * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 4981 * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well 4982 * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 4983 * attribute must be provided as well 4984 * @NL80211_CHAN_WIDTH_5: 5 MHz OFDM channel 4985 * @NL80211_CHAN_WIDTH_10: 10 MHz OFDM channel 4986 * @NL80211_CHAN_WIDTH_1: 1 MHz OFDM channel 4987 * @NL80211_CHAN_WIDTH_2: 2 MHz OFDM channel 4988 * @NL80211_CHAN_WIDTH_4: 4 MHz OFDM channel 4989 * @NL80211_CHAN_WIDTH_8: 8 MHz OFDM channel 4990 * @NL80211_CHAN_WIDTH_16: 16 MHz OFDM channel 4991 * @NL80211_CHAN_WIDTH_320: 320 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 4992 * attribute must be provided as well 4993 */ 4994 enum nl80211_chan_width { 4995 NL80211_CHAN_WIDTH_20_NOHT, 4996 NL80211_CHAN_WIDTH_20, 4997 NL80211_CHAN_WIDTH_40, 4998 NL80211_CHAN_WIDTH_80, 4999 NL80211_CHAN_WIDTH_80P80, 5000 NL80211_CHAN_WIDTH_160, 5001 NL80211_CHAN_WIDTH_5, 5002 NL80211_CHAN_WIDTH_10, 5003 NL80211_CHAN_WIDTH_1, 5004 NL80211_CHAN_WIDTH_2, 5005 NL80211_CHAN_WIDTH_4, 5006 NL80211_CHAN_WIDTH_8, 5007 NL80211_CHAN_WIDTH_16, 5008 NL80211_CHAN_WIDTH_320, 5009 }; 5010 5011 /** 5012 * enum nl80211_bss_scan_width - control channel width for a BSS 5013 * 5014 * These values are used with the %NL80211_BSS_CHAN_WIDTH attribute. 5015 * 5016 * @NL80211_BSS_CHAN_WIDTH_20: control channel is 20 MHz wide or compatible 5017 * @NL80211_BSS_CHAN_WIDTH_10: control channel is 10 MHz wide 5018 * @NL80211_BSS_CHAN_WIDTH_5: control channel is 5 MHz wide 5019 * @NL80211_BSS_CHAN_WIDTH_1: control channel is 1 MHz wide 5020 * @NL80211_BSS_CHAN_WIDTH_2: control channel is 2 MHz wide 5021 */ 5022 enum nl80211_bss_scan_width { 5023 NL80211_BSS_CHAN_WIDTH_20, 5024 NL80211_BSS_CHAN_WIDTH_10, 5025 NL80211_BSS_CHAN_WIDTH_5, 5026 NL80211_BSS_CHAN_WIDTH_1, 5027 NL80211_BSS_CHAN_WIDTH_2, 5028 }; 5029 5030 /** 5031 * enum nl80211_bss - netlink attributes for a BSS 5032 * 5033 * @__NL80211_BSS_INVALID: invalid 5034 * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) 5035 * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) 5036 * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) 5037 * (if @NL80211_BSS_PRESP_DATA is present then this is known to be 5038 * from a probe response, otherwise it may be from the same beacon 5039 * that the NL80211_BSS_BEACON_TSF will be from) 5040 * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) 5041 * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) 5042 * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the 5043 * raw information elements from the probe response/beacon (bin); 5044 * if the %NL80211_BSS_BEACON_IES attribute is present and the data is 5045 * different then the IEs here are from a Probe Response frame; otherwise 5046 * they are from a Beacon frame. 5047 * However, if the driver does not indicate the source of the IEs, these 5048 * IEs may be from either frame subtype. 5049 * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the 5050 * data here is known to be from a probe response, without any heuristics. 5051 * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon 5052 * in mBm (100 * dBm) (s32) 5053 * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon 5054 * in unspecified units, scaled to 0..100 (u8) 5055 * @NL80211_BSS_STATUS: status, if this BSS is "used" 5056 * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms 5057 * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information 5058 * elements from a Beacon frame (bin); not present if no Beacon frame has 5059 * yet been received 5060 * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel 5061 * (u32, enum nl80211_bss_scan_width) - No longer used! 5062 * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) 5063 * (not present if no beacon frame has been received yet) 5064 * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and 5065 * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) 5066 * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry 5067 * was last updated by a received frame. The value is expected to be 5068 * accurate to about 10ms. (u64, nanoseconds) 5069 * @NL80211_BSS_PAD: attribute used for padding for 64-bit alignment 5070 * @NL80211_BSS_PARENT_TSF: the time at the start of reception of the first 5071 * octet of the timestamp field of the last beacon/probe received for 5072 * this BSS. The time is the TSF of the BSS specified by 5073 * @NL80211_BSS_PARENT_BSSID. (u64). 5074 * @NL80211_BSS_PARENT_BSSID: the BSS according to which @NL80211_BSS_PARENT_TSF 5075 * is set. 5076 * @NL80211_BSS_CHAIN_SIGNAL: per-chain signal strength of last BSS update. 5077 * Contains a nested array of signal strength attributes (u8, dBm), 5078 * using the nesting index as the antenna number. 5079 * @NL80211_BSS_FREQUENCY_OFFSET: frequency offset in KHz 5080 * @NL80211_BSS_MLO_LINK_ID: MLO link ID of the BSS (u8). 5081 * @NL80211_BSS_MLD_ADDR: MLD address of this BSS if connected to it. 5082 * @__NL80211_BSS_AFTER_LAST: internal 5083 * @NL80211_BSS_MAX: highest BSS attribute 5084 */ 5085 enum nl80211_bss { 5086 __NL80211_BSS_INVALID, 5087 NL80211_BSS_BSSID, 5088 NL80211_BSS_FREQUENCY, 5089 NL80211_BSS_TSF, 5090 NL80211_BSS_BEACON_INTERVAL, 5091 NL80211_BSS_CAPABILITY, 5092 NL80211_BSS_INFORMATION_ELEMENTS, 5093 NL80211_BSS_SIGNAL_MBM, 5094 NL80211_BSS_SIGNAL_UNSPEC, 5095 NL80211_BSS_STATUS, 5096 NL80211_BSS_SEEN_MS_AGO, 5097 NL80211_BSS_BEACON_IES, 5098 NL80211_BSS_CHAN_WIDTH, 5099 NL80211_BSS_BEACON_TSF, 5100 NL80211_BSS_PRESP_DATA, 5101 NL80211_BSS_LAST_SEEN_BOOTTIME, 5102 NL80211_BSS_PAD, 5103 NL80211_BSS_PARENT_TSF, 5104 NL80211_BSS_PARENT_BSSID, 5105 NL80211_BSS_CHAIN_SIGNAL, 5106 NL80211_BSS_FREQUENCY_OFFSET, 5107 NL80211_BSS_MLO_LINK_ID, 5108 NL80211_BSS_MLD_ADDR, 5109 5110 /* keep last */ 5111 __NL80211_BSS_AFTER_LAST, 5112 NL80211_BSS_MAX = __NL80211_BSS_AFTER_LAST - 1 5113 }; 5114 5115 /** 5116 * enum nl80211_bss_status - BSS "status" 5117 * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. 5118 * Note that this is no longer used since cfg80211 no longer 5119 * keeps track of whether or not authentication was done with 5120 * a given BSS. 5121 * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. 5122 * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. 5123 * 5124 * The BSS status is a BSS attribute in scan dumps, which 5125 * indicates the status the interface has wrt. this BSS. 5126 */ 5127 enum nl80211_bss_status { 5128 NL80211_BSS_STATUS_AUTHENTICATED, 5129 NL80211_BSS_STATUS_ASSOCIATED, 5130 NL80211_BSS_STATUS_IBSS_JOINED, 5131 }; 5132 5133 /** 5134 * enum nl80211_auth_type - AuthenticationType 5135 * 5136 * @NL80211_AUTHTYPE_OPEN_SYSTEM: Open System authentication 5137 * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) 5138 * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) 5139 * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) 5140 * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals 5141 * @NL80211_AUTHTYPE_FILS_SK: Fast Initial Link Setup shared key 5142 * @NL80211_AUTHTYPE_FILS_SK_PFS: Fast Initial Link Setup shared key with PFS 5143 * @NL80211_AUTHTYPE_FILS_PK: Fast Initial Link Setup public key 5144 * @__NL80211_AUTHTYPE_NUM: internal 5145 * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm 5146 * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by 5147 * trying multiple times); this is invalid in netlink -- leave out 5148 * the attribute for this on CONNECT commands. 5149 */ 5150 enum nl80211_auth_type { 5151 NL80211_AUTHTYPE_OPEN_SYSTEM, 5152 NL80211_AUTHTYPE_SHARED_KEY, 5153 NL80211_AUTHTYPE_FT, 5154 NL80211_AUTHTYPE_NETWORK_EAP, 5155 NL80211_AUTHTYPE_SAE, 5156 NL80211_AUTHTYPE_FILS_SK, 5157 NL80211_AUTHTYPE_FILS_SK_PFS, 5158 NL80211_AUTHTYPE_FILS_PK, 5159 5160 /* keep last */ 5161 __NL80211_AUTHTYPE_NUM, 5162 NL80211_AUTHTYPE_MAX = __NL80211_AUTHTYPE_NUM - 1, 5163 NL80211_AUTHTYPE_AUTOMATIC 5164 }; 5165 5166 /** 5167 * enum nl80211_key_type - Key Type 5168 * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key 5169 * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key 5170 * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS) 5171 * @NUM_NL80211_KEYTYPES: number of defined key types 5172 */ 5173 enum nl80211_key_type { 5174 NL80211_KEYTYPE_GROUP, 5175 NL80211_KEYTYPE_PAIRWISE, 5176 NL80211_KEYTYPE_PEERKEY, 5177 5178 NUM_NL80211_KEYTYPES 5179 }; 5180 5181 /** 5182 * enum nl80211_mfp - Management frame protection state 5183 * @NL80211_MFP_NO: Management frame protection not used 5184 * @NL80211_MFP_REQUIRED: Management frame protection required 5185 * @NL80211_MFP_OPTIONAL: Management frame protection is optional 5186 */ 5187 enum nl80211_mfp { 5188 NL80211_MFP_NO, 5189 NL80211_MFP_REQUIRED, 5190 NL80211_MFP_OPTIONAL, 5191 }; 5192 5193 enum nl80211_wpa_versions { 5194 NL80211_WPA_VERSION_1 = 1 << 0, 5195 NL80211_WPA_VERSION_2 = 1 << 1, 5196 NL80211_WPA_VERSION_3 = 1 << 2, 5197 }; 5198 5199 /** 5200 * enum nl80211_key_default_types - key default types 5201 * @__NL80211_KEY_DEFAULT_TYPE_INVALID: invalid 5202 * @NL80211_KEY_DEFAULT_TYPE_UNICAST: key should be used as default 5203 * unicast key 5204 * @NL80211_KEY_DEFAULT_TYPE_MULTICAST: key should be used as default 5205 * multicast key 5206 * @NUM_NL80211_KEY_DEFAULT_TYPES: number of default types 5207 */ 5208 enum nl80211_key_default_types { 5209 __NL80211_KEY_DEFAULT_TYPE_INVALID, 5210 NL80211_KEY_DEFAULT_TYPE_UNICAST, 5211 NL80211_KEY_DEFAULT_TYPE_MULTICAST, 5212 5213 NUM_NL80211_KEY_DEFAULT_TYPES 5214 }; 5215 5216 /** 5217 * enum nl80211_key_attributes - key attributes 5218 * @__NL80211_KEY_INVALID: invalid 5219 * @NL80211_KEY_DATA: (temporal) key data; for TKIP this consists of 5220 * 16 bytes encryption key followed by 8 bytes each for TX and RX MIC 5221 * keys 5222 * @NL80211_KEY_IDX: key ID (u8, 0-3) 5223 * @NL80211_KEY_CIPHER: key cipher suite (u32, as defined by IEEE 802.11 5224 * section 7.3.2.25.1, e.g. 0x000FAC04) 5225 * @NL80211_KEY_SEQ: transmit key sequence number (IV/PN) for TKIP and 5226 * CCMP keys, each six bytes in little endian 5227 * @NL80211_KEY_DEFAULT: flag indicating default key 5228 * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key 5229 * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not 5230 * specified the default depends on whether a MAC address was 5231 * given with the command using the key or not (u32) 5232 * @NL80211_KEY_DEFAULT_TYPES: A nested attribute containing flags 5233 * attributes, specifying what a key should be set as default as. 5234 * See &enum nl80211_key_default_types. 5235 * @NL80211_KEY_MODE: the mode from enum nl80211_key_mode. 5236 * Defaults to @NL80211_KEY_RX_TX. 5237 * @NL80211_KEY_DEFAULT_BEACON: flag indicating default Beacon frame key 5238 * 5239 * @__NL80211_KEY_AFTER_LAST: internal 5240 * @NL80211_KEY_MAX: highest key attribute 5241 */ 5242 enum nl80211_key_attributes { 5243 __NL80211_KEY_INVALID, 5244 NL80211_KEY_DATA, 5245 NL80211_KEY_IDX, 5246 NL80211_KEY_CIPHER, 5247 NL80211_KEY_SEQ, 5248 NL80211_KEY_DEFAULT, 5249 NL80211_KEY_DEFAULT_MGMT, 5250 NL80211_KEY_TYPE, 5251 NL80211_KEY_DEFAULT_TYPES, 5252 NL80211_KEY_MODE, 5253 NL80211_KEY_DEFAULT_BEACON, 5254 5255 /* keep last */ 5256 __NL80211_KEY_AFTER_LAST, 5257 NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1 5258 }; 5259 5260 /** 5261 * enum nl80211_tx_rate_attributes - TX rate set attributes 5262 * @__NL80211_TXRATE_INVALID: invalid 5263 * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection 5264 * in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with 5265 * 1 = 500 kbps) but without the IE length restriction (at most 5266 * %NL80211_MAX_SUPP_RATES in a single array). 5267 * @NL80211_TXRATE_HT: HT (MCS) rates allowed for TX rate selection 5268 * in an array of MCS numbers. 5269 * @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection, 5270 * see &struct nl80211_txrate_vht 5271 * @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi 5272 * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection, 5273 * see &struct nl80211_txrate_he 5274 * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us. 5275 * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF. 5276 * @__NL80211_TXRATE_AFTER_LAST: internal 5277 * @NL80211_TXRATE_MAX: highest TX rate attribute 5278 */ 5279 enum nl80211_tx_rate_attributes { 5280 __NL80211_TXRATE_INVALID, 5281 NL80211_TXRATE_LEGACY, 5282 NL80211_TXRATE_HT, 5283 NL80211_TXRATE_VHT, 5284 NL80211_TXRATE_GI, 5285 NL80211_TXRATE_HE, 5286 NL80211_TXRATE_HE_GI, 5287 NL80211_TXRATE_HE_LTF, 5288 5289 /* keep last */ 5290 __NL80211_TXRATE_AFTER_LAST, 5291 NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1 5292 }; 5293 5294 #define NL80211_TXRATE_MCS NL80211_TXRATE_HT 5295 #define NL80211_VHT_NSS_MAX 8 5296 5297 /** 5298 * struct nl80211_txrate_vht - VHT MCS/NSS txrate bitmap 5299 * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) 5300 */ 5301 struct nl80211_txrate_vht { 5302 __u16 mcs[NL80211_VHT_NSS_MAX]; 5303 }; 5304 5305 #define NL80211_HE_NSS_MAX 8 5306 /** 5307 * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap 5308 * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) 5309 */ 5310 struct nl80211_txrate_he { 5311 __u16 mcs[NL80211_HE_NSS_MAX]; 5312 }; 5313 5314 enum nl80211_txrate_gi { 5315 NL80211_TXRATE_DEFAULT_GI, 5316 NL80211_TXRATE_FORCE_SGI, 5317 NL80211_TXRATE_FORCE_LGI, 5318 }; 5319 5320 /** 5321 * enum nl80211_band - Frequency band 5322 * @NL80211_BAND_2GHZ: 2.4 GHz ISM band 5323 * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz) 5324 * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) 5325 * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) 5326 * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs 5327 * @NL80211_BAND_LC: light communication band (placeholder) 5328 * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace 5329 * since newer kernel versions may support more bands 5330 */ 5331 enum nl80211_band { 5332 NL80211_BAND_2GHZ, 5333 NL80211_BAND_5GHZ, 5334 NL80211_BAND_60GHZ, 5335 NL80211_BAND_6GHZ, 5336 NL80211_BAND_S1GHZ, 5337 NL80211_BAND_LC, 5338 5339 NUM_NL80211_BANDS, 5340 }; 5341 5342 /** 5343 * enum nl80211_ps_state - powersave state 5344 * @NL80211_PS_DISABLED: powersave is disabled 5345 * @NL80211_PS_ENABLED: powersave is enabled 5346 */ 5347 enum nl80211_ps_state { 5348 NL80211_PS_DISABLED, 5349 NL80211_PS_ENABLED, 5350 }; 5351 5352 /** 5353 * enum nl80211_attr_cqm - connection quality monitor attributes 5354 * @__NL80211_ATTR_CQM_INVALID: invalid 5355 * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies 5356 * the threshold for the RSSI level at which an event will be sent. Zero 5357 * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is 5358 * set, multiple values can be supplied as a low-to-high sorted array of 5359 * threshold values in dBm. Events will be sent when the RSSI value 5360 * crosses any of the thresholds. 5361 * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies 5362 * the minimum amount the RSSI level must change after an event before a 5363 * new event may be issued (to reduce effects of RSSI oscillation). 5364 * @NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT: RSSI threshold event 5365 * @NL80211_ATTR_CQM_PKT_LOSS_EVENT: a u32 value indicating that this many 5366 * consecutive packets were not acknowledged by the peer 5367 * @NL80211_ATTR_CQM_TXE_RATE: TX error rate in %. Minimum % of TX failures 5368 * during the given %NL80211_ATTR_CQM_TXE_INTVL before an 5369 * %NL80211_CMD_NOTIFY_CQM with reported %NL80211_ATTR_CQM_TXE_RATE and 5370 * %NL80211_ATTR_CQM_TXE_PKTS is generated. 5371 * @NL80211_ATTR_CQM_TXE_PKTS: number of attempted packets in a given 5372 * %NL80211_ATTR_CQM_TXE_INTVL before %NL80211_ATTR_CQM_TXE_RATE is 5373 * checked. 5374 * @NL80211_ATTR_CQM_TXE_INTVL: interval in seconds. Specifies the periodic 5375 * interval in which %NL80211_ATTR_CQM_TXE_PKTS and 5376 * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an 5377 * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. 5378 * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon 5379 * loss event 5380 * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the 5381 * RSSI threshold event. 5382 * @__NL80211_ATTR_CQM_AFTER_LAST: internal 5383 * @NL80211_ATTR_CQM_MAX: highest key attribute 5384 */ 5385 enum nl80211_attr_cqm { 5386 __NL80211_ATTR_CQM_INVALID, 5387 NL80211_ATTR_CQM_RSSI_THOLD, 5388 NL80211_ATTR_CQM_RSSI_HYST, 5389 NL80211_ATTR_CQM_RSSI_THRESHOLD_EVENT, 5390 NL80211_ATTR_CQM_PKT_LOSS_EVENT, 5391 NL80211_ATTR_CQM_TXE_RATE, 5392 NL80211_ATTR_CQM_TXE_PKTS, 5393 NL80211_ATTR_CQM_TXE_INTVL, 5394 NL80211_ATTR_CQM_BEACON_LOSS_EVENT, 5395 NL80211_ATTR_CQM_RSSI_LEVEL, 5396 5397 /* keep last */ 5398 __NL80211_ATTR_CQM_AFTER_LAST, 5399 NL80211_ATTR_CQM_MAX = __NL80211_ATTR_CQM_AFTER_LAST - 1 5400 }; 5401 5402 /** 5403 * enum nl80211_cqm_rssi_threshold_event - RSSI threshold event 5404 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW: The RSSI level is lower than the 5405 * configured threshold 5406 * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the 5407 * configured threshold 5408 * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent) 5409 */ 5410 enum nl80211_cqm_rssi_threshold_event { 5411 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, 5412 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH, 5413 NL80211_CQM_RSSI_BEACON_LOSS_EVENT, 5414 }; 5415 5416 5417 /** 5418 * enum nl80211_tx_power_setting - TX power adjustment 5419 * @NL80211_TX_POWER_AUTOMATIC: automatically determine transmit power 5420 * @NL80211_TX_POWER_LIMITED: limit TX power by the mBm parameter 5421 * @NL80211_TX_POWER_FIXED: fix TX power to the mBm parameter 5422 */ 5423 enum nl80211_tx_power_setting { 5424 NL80211_TX_POWER_AUTOMATIC, 5425 NL80211_TX_POWER_LIMITED, 5426 NL80211_TX_POWER_FIXED, 5427 }; 5428 5429 /** 5430 * enum nl80211_tid_config - TID config state 5431 * @NL80211_TID_CONFIG_ENABLE: Enable config for the TID 5432 * @NL80211_TID_CONFIG_DISABLE: Disable config for the TID 5433 */ 5434 enum nl80211_tid_config { 5435 NL80211_TID_CONFIG_ENABLE, 5436 NL80211_TID_CONFIG_DISABLE, 5437 }; 5438 5439 /* enum nl80211_tx_rate_setting - TX rate configuration type 5440 * @NL80211_TX_RATE_AUTOMATIC: automatically determine TX rate 5441 * @NL80211_TX_RATE_LIMITED: limit the TX rate by the TX rate parameter 5442 * @NL80211_TX_RATE_FIXED: fix TX rate to the TX rate parameter 5443 */ 5444 enum nl80211_tx_rate_setting { 5445 NL80211_TX_RATE_AUTOMATIC, 5446 NL80211_TX_RATE_LIMITED, 5447 NL80211_TX_RATE_FIXED, 5448 }; 5449 5450 /* enum nl80211_tid_config_attr - TID specific configuration. 5451 * @NL80211_TID_CONFIG_ATTR_PAD: pad attribute for 64-bit values 5452 * @NL80211_TID_CONFIG_ATTR_VIF_SUPP: a bitmap (u64) of attributes supported 5453 * for per-vif configuration; doesn't list the ones that are generic 5454 * (%NL80211_TID_CONFIG_ATTR_TIDS, %NL80211_TID_CONFIG_ATTR_OVERRIDE). 5455 * @NL80211_TID_CONFIG_ATTR_PEER_SUPP: same as the previous per-vif one, but 5456 * per peer instead. 5457 * @NL80211_TID_CONFIG_ATTR_OVERRIDE: flag attribue, if set indicates 5458 * that the new configuration overrides all previous peer 5459 * configurations, otherwise previous peer specific configurations 5460 * should be left untouched. 5461 * @NL80211_TID_CONFIG_ATTR_TIDS: a bitmask value of TIDs (bit 0 to 7) 5462 * Its type is u16. 5463 * @NL80211_TID_CONFIG_ATTR_NOACK: Configure ack policy for the TID. 5464 * specified in %NL80211_TID_CONFIG_ATTR_TID. see %enum nl80211_tid_config. 5465 * Its type is u8. 5466 * @NL80211_TID_CONFIG_ATTR_RETRY_SHORT: Number of retries used with data frame 5467 * transmission, user-space sets this configuration in 5468 * &NL80211_CMD_SET_TID_CONFIG. It is u8 type, min value is 1 and 5469 * the max value is advertised by the driver in this attribute on 5470 * output in wiphy capabilities. 5471 * @NL80211_TID_CONFIG_ATTR_RETRY_LONG: Number of retries used with data frame 5472 * transmission, user-space sets this configuration in 5473 * &NL80211_CMD_SET_TID_CONFIG. Its type is u8, min value is 1 and 5474 * the max value is advertised by the driver in this attribute on 5475 * output in wiphy capabilities. 5476 * @NL80211_TID_CONFIG_ATTR_AMPDU_CTRL: Enable/Disable MPDU aggregation 5477 * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. 5478 * Its type is u8, using the values from &nl80211_tid_config. 5479 * @NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL: Enable/Disable RTS_CTS for the TIDs 5480 * specified in %NL80211_TID_CONFIG_ATTR_TIDS. It is u8 type, using 5481 * the values from &nl80211_tid_config. 5482 * @NL80211_TID_CONFIG_ATTR_AMSDU_CTRL: Enable/Disable MSDU aggregation 5483 * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. 5484 * Its type is u8, using the values from &nl80211_tid_config. 5485 * @NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE: This attribute will be useful 5486 * to notfiy the driver that what type of txrate should be used 5487 * for the TIDs specified in %NL80211_TID_CONFIG_ATTR_TIDS. using 5488 * the values form &nl80211_tx_rate_setting. 5489 * @NL80211_TID_CONFIG_ATTR_TX_RATE: Data frame TX rate mask should be applied 5490 * with the parameters passed through %NL80211_ATTR_TX_RATES. 5491 * configuration is applied to the data frame for the tid to that connected 5492 * station. 5493 */ 5494 enum nl80211_tid_config_attr { 5495 __NL80211_TID_CONFIG_ATTR_INVALID, 5496 NL80211_TID_CONFIG_ATTR_PAD, 5497 NL80211_TID_CONFIG_ATTR_VIF_SUPP, 5498 NL80211_TID_CONFIG_ATTR_PEER_SUPP, 5499 NL80211_TID_CONFIG_ATTR_OVERRIDE, 5500 NL80211_TID_CONFIG_ATTR_TIDS, 5501 NL80211_TID_CONFIG_ATTR_NOACK, 5502 NL80211_TID_CONFIG_ATTR_RETRY_SHORT, 5503 NL80211_TID_CONFIG_ATTR_RETRY_LONG, 5504 NL80211_TID_CONFIG_ATTR_AMPDU_CTRL, 5505 NL80211_TID_CONFIG_ATTR_RTSCTS_CTRL, 5506 NL80211_TID_CONFIG_ATTR_AMSDU_CTRL, 5507 NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE, 5508 NL80211_TID_CONFIG_ATTR_TX_RATE, 5509 5510 /* keep last */ 5511 __NL80211_TID_CONFIG_ATTR_AFTER_LAST, 5512 NL80211_TID_CONFIG_ATTR_MAX = __NL80211_TID_CONFIG_ATTR_AFTER_LAST - 1 5513 }; 5514 5515 /** 5516 * enum nl80211_packet_pattern_attr - packet pattern attribute 5517 * @__NL80211_PKTPAT_INVALID: invalid number for nested attribute 5518 * @NL80211_PKTPAT_PATTERN: the pattern, values where the mask has 5519 * a zero bit are ignored 5520 * @NL80211_PKTPAT_MASK: pattern mask, must be long enough to have 5521 * a bit for each byte in the pattern. The lowest-order bit corresponds 5522 * to the first byte of the pattern, but the bytes of the pattern are 5523 * in a little-endian-like format, i.e. the 9th byte of the pattern 5524 * corresponds to the lowest-order bit in the second byte of the mask. 5525 * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where 5526 * xx indicates "don't care") would be represented by a pattern of 5527 * twelve zero bytes, and a mask of "0xed,0x01". 5528 * Note that the pattern matching is done as though frames were not 5529 * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked 5530 * first (including SNAP header unpacking) and then matched. 5531 * @NL80211_PKTPAT_OFFSET: packet offset, pattern is matched after 5532 * these fixed number of bytes of received packet 5533 * @NUM_NL80211_PKTPAT: number of attributes 5534 * @MAX_NL80211_PKTPAT: max attribute number 5535 */ 5536 enum nl80211_packet_pattern_attr { 5537 __NL80211_PKTPAT_INVALID, 5538 NL80211_PKTPAT_MASK, 5539 NL80211_PKTPAT_PATTERN, 5540 NL80211_PKTPAT_OFFSET, 5541 5542 NUM_NL80211_PKTPAT, 5543 MAX_NL80211_PKTPAT = NUM_NL80211_PKTPAT - 1, 5544 }; 5545 5546 /** 5547 * struct nl80211_pattern_support - packet pattern support information 5548 * @max_patterns: maximum number of patterns supported 5549 * @min_pattern_len: minimum length of each pattern 5550 * @max_pattern_len: maximum length of each pattern 5551 * @max_pkt_offset: maximum Rx packet offset 5552 * 5553 * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when 5554 * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED or in 5555 * %NL80211_ATTR_COALESCE_RULE_PKT_PATTERN when that is part of 5556 * %NL80211_ATTR_COALESCE_RULE in the capability information given 5557 * by the kernel to userspace. 5558 */ 5559 struct nl80211_pattern_support { 5560 __u32 max_patterns; 5561 __u32 min_pattern_len; 5562 __u32 max_pattern_len; 5563 __u32 max_pkt_offset; 5564 } __attribute__((packed)); 5565 5566 /* only for backward compatibility */ 5567 #define __NL80211_WOWLAN_PKTPAT_INVALID __NL80211_PKTPAT_INVALID 5568 #define NL80211_WOWLAN_PKTPAT_MASK NL80211_PKTPAT_MASK 5569 #define NL80211_WOWLAN_PKTPAT_PATTERN NL80211_PKTPAT_PATTERN 5570 #define NL80211_WOWLAN_PKTPAT_OFFSET NL80211_PKTPAT_OFFSET 5571 #define NUM_NL80211_WOWLAN_PKTPAT NUM_NL80211_PKTPAT 5572 #define MAX_NL80211_WOWLAN_PKTPAT MAX_NL80211_PKTPAT 5573 #define nl80211_wowlan_pattern_support nl80211_pattern_support 5574 5575 /** 5576 * enum nl80211_wowlan_triggers - WoWLAN trigger definitions 5577 * @__NL80211_WOWLAN_TRIG_INVALID: invalid number for nested attributes 5578 * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put 5579 * the chip into a special state -- works best with chips that have 5580 * support for low-power operation already (flag) 5581 * Note that this mode is incompatible with all of the others, if 5582 * any others are even supported by the device. 5583 * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect 5584 * is detected is implementation-specific (flag) 5585 * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed 5586 * by 16 repetitions of MAC addr, anywhere in payload) (flag) 5587 * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns 5588 * which are passed in an array of nested attributes, each nested attribute 5589 * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. 5590 * Each pattern defines a wakeup packet. Packet offset is associated with 5591 * each pattern which is used while matching the pattern. The matching is 5592 * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the 5593 * pattern matching is done after the packet is converted to the MSDU. 5594 * 5595 * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute 5596 * carrying a &struct nl80211_pattern_support. 5597 * 5598 * When reporting wakeup. it is a u32 attribute containing the 0-based 5599 * index of the pattern that caused the wakeup, in the patterns passed 5600 * to the kernel when configuring. 5601 * @NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED: Not a real trigger, and cannot be 5602 * used when setting, used only to indicate that GTK rekeying is supported 5603 * by the device (flag) 5604 * @NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE: wake up on GTK rekey failure (if 5605 * done by the device) (flag) 5606 * @NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST: wake up on EAP Identity Request 5607 * packet (flag) 5608 * @NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE: wake up on 4-way handshake (flag) 5609 * @NL80211_WOWLAN_TRIG_RFKILL_RELEASE: wake up when rfkill is released 5610 * (on devices that have rfkill in the device) (flag) 5611 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211: For wakeup reporting only, contains 5612 * the 802.11 packet that caused the wakeup, e.g. a deauth frame. The frame 5613 * may be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN 5614 * attribute contains the original length. 5615 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN: Original length of the 802.11 5616 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211 5617 * attribute if the packet was truncated somewhere. 5618 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023: For wakeup reporting only, contains the 5619 * 802.11 packet that caused the wakeup, e.g. a magic packet. The frame may 5620 * be truncated, the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN attribute 5621 * contains the original length. 5622 * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 5623 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 5624 * attribute if the packet was truncated somewhere. 5625 * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section 5626 * "TCP connection wakeup" for more details. This is a nested attribute 5627 * containing the exact information for establishing and keeping alive 5628 * the TCP connection. 5629 * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the 5630 * wakeup packet was received on the TCP connection 5631 * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the 5632 * TCP connection was lost or failed to be established 5633 * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, 5634 * the TCP connection ran out of tokens to use for data to send to the 5635 * service 5636 * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network 5637 * is detected. This is a nested attribute that contains the 5638 * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It 5639 * specifies how the scan is performed (e.g. the interval, the 5640 * channels to scan and the initial delay) as well as the scan 5641 * results that will trigger a wake (i.e. the matchsets). This 5642 * attribute is also sent in a response to 5643 * @NL80211_CMD_GET_WIPHY, indicating the number of match sets 5644 * supported by the driver (u32). 5645 * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute 5646 * containing an array with information about what triggered the 5647 * wake up. If no elements are present in the array, it means 5648 * that the information is not available. If more than one 5649 * element is present, it means that more than one match 5650 * occurred. 5651 * Each element in the array is a nested attribute that contains 5652 * one optional %NL80211_ATTR_SSID attribute and one optional 5653 * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of 5654 * these attributes must be present. If 5655 * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one 5656 * frequency, it means that the match occurred in more than one 5657 * channel. 5658 * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers 5659 * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number 5660 * 5661 * These nested attributes are used to configure the wakeup triggers and 5662 * to report the wakeup reason(s). 5663 */ 5664 enum nl80211_wowlan_triggers { 5665 __NL80211_WOWLAN_TRIG_INVALID, 5666 NL80211_WOWLAN_TRIG_ANY, 5667 NL80211_WOWLAN_TRIG_DISCONNECT, 5668 NL80211_WOWLAN_TRIG_MAGIC_PKT, 5669 NL80211_WOWLAN_TRIG_PKT_PATTERN, 5670 NL80211_WOWLAN_TRIG_GTK_REKEY_SUPPORTED, 5671 NL80211_WOWLAN_TRIG_GTK_REKEY_FAILURE, 5672 NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST, 5673 NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE, 5674 NL80211_WOWLAN_TRIG_RFKILL_RELEASE, 5675 NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211, 5676 NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, 5677 NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, 5678 NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, 5679 NL80211_WOWLAN_TRIG_TCP_CONNECTION, 5680 NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, 5681 NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, 5682 NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, 5683 NL80211_WOWLAN_TRIG_NET_DETECT, 5684 NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, 5685 5686 /* keep last */ 5687 NUM_NL80211_WOWLAN_TRIG, 5688 MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 5689 }; 5690 5691 /** 5692 * DOC: TCP connection wakeup 5693 * 5694 * Some devices can establish a TCP connection in order to be woken up by a 5695 * packet coming in from outside their network segment, or behind NAT. If 5696 * configured, the device will establish a TCP connection to the given 5697 * service, and periodically send data to that service. The first data 5698 * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. 5699 * The data packets can optionally include a (little endian) sequence 5700 * number (in the TCP payload!) that is generated by the device, and, also 5701 * optionally, a token from a list of tokens. This serves as a keep-alive 5702 * with the service, and for NATed connections, etc. 5703 * 5704 * During this keep-alive period, the server doesn't send any data to the 5705 * client. When receiving data, it is compared against the wakeup pattern 5706 * (and mask) and if it matches, the host is woken up. Similarly, if the 5707 * connection breaks or cannot be established to start with, the host is 5708 * also woken up. 5709 * 5710 * Developer's note: ARP offload is required for this, otherwise TCP 5711 * response packets might not go through correctly. 5712 */ 5713 5714 /** 5715 * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence 5716 * @start: starting value 5717 * @offset: offset of sequence number in packet 5718 * @len: length of the sequence value to write, 1 through 4 5719 * 5720 * Note: don't confuse with the TCP sequence number(s), this is for the 5721 * keepalive packet payload. The actual value is written into the packet 5722 * in little endian. 5723 */ 5724 struct nl80211_wowlan_tcp_data_seq { 5725 __u32 start, offset, len; 5726 }; 5727 5728 /** 5729 * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config 5730 * @offset: offset of token in packet 5731 * @len: length of each token 5732 * @token_stream: stream of data to be used for the tokens, the length must 5733 * be a multiple of @len for this to make sense 5734 */ 5735 struct nl80211_wowlan_tcp_data_token { 5736 __u32 offset, len; 5737 __u8 token_stream[]; 5738 }; 5739 5740 /** 5741 * struct nl80211_wowlan_tcp_data_token_feature - data token features 5742 * @min_len: minimum token length 5743 * @max_len: maximum token length 5744 * @bufsize: total available token buffer size (max size of @token_stream) 5745 */ 5746 struct nl80211_wowlan_tcp_data_token_feature { 5747 __u32 min_len, max_len, bufsize; 5748 }; 5749 5750 /** 5751 * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters 5752 * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes 5753 * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) 5754 * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address 5755 * (in network byte order) 5756 * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because 5757 * route lookup when configured might be invalid by the time we suspend, 5758 * and doing a route lookup when suspending is no longer possible as it 5759 * might require ARP querying. 5760 * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a 5761 * socket and port will be allocated 5762 * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) 5763 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. 5764 * For feature advertising, a u32 attribute holding the maximum length 5765 * of the data payload. 5766 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration 5767 * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature 5768 * advertising it is just a flag 5769 * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, 5770 * see &struct nl80211_wowlan_tcp_data_token and for advertising see 5771 * &struct nl80211_wowlan_tcp_data_token_feature. 5772 * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum 5773 * interval in feature advertising (u32) 5774 * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a 5775 * u32 attribute holding the maximum length 5776 * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for 5777 * feature advertising. The mask works like @NL80211_PKTPAT_MASK 5778 * but on the TCP payload only. 5779 * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes 5780 * @MAX_NL80211_WOWLAN_TCP: highest attribute number 5781 */ 5782 enum nl80211_wowlan_tcp_attrs { 5783 __NL80211_WOWLAN_TCP_INVALID, 5784 NL80211_WOWLAN_TCP_SRC_IPV4, 5785 NL80211_WOWLAN_TCP_DST_IPV4, 5786 NL80211_WOWLAN_TCP_DST_MAC, 5787 NL80211_WOWLAN_TCP_SRC_PORT, 5788 NL80211_WOWLAN_TCP_DST_PORT, 5789 NL80211_WOWLAN_TCP_DATA_PAYLOAD, 5790 NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, 5791 NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, 5792 NL80211_WOWLAN_TCP_DATA_INTERVAL, 5793 NL80211_WOWLAN_TCP_WAKE_PAYLOAD, 5794 NL80211_WOWLAN_TCP_WAKE_MASK, 5795 5796 /* keep last */ 5797 NUM_NL80211_WOWLAN_TCP, 5798 MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 5799 }; 5800 5801 /** 5802 * struct nl80211_coalesce_rule_support - coalesce rule support information 5803 * @max_rules: maximum number of rules supported 5804 * @pat: packet pattern support information 5805 * @max_delay: maximum supported coalescing delay in msecs 5806 * 5807 * This struct is carried in %NL80211_ATTR_COALESCE_RULE in the 5808 * capability information given by the kernel to userspace. 5809 */ 5810 struct nl80211_coalesce_rule_support { 5811 __u32 max_rules; 5812 struct nl80211_pattern_support pat; 5813 __u32 max_delay; 5814 } __attribute__((packed)); 5815 5816 /** 5817 * enum nl80211_attr_coalesce_rule - coalesce rule attribute 5818 * @__NL80211_COALESCE_RULE_INVALID: invalid number for nested attribute 5819 * @NL80211_ATTR_COALESCE_RULE_DELAY: delay in msecs used for packet coalescing 5820 * @NL80211_ATTR_COALESCE_RULE_CONDITION: condition for packet coalescence, 5821 * see &enum nl80211_coalesce_condition. 5822 * @NL80211_ATTR_COALESCE_RULE_PKT_PATTERN: packet offset, pattern is matched 5823 * after these fixed number of bytes of received packet 5824 * @NUM_NL80211_ATTR_COALESCE_RULE: number of attributes 5825 * @NL80211_ATTR_COALESCE_RULE_MAX: max attribute number 5826 */ 5827 enum nl80211_attr_coalesce_rule { 5828 __NL80211_COALESCE_RULE_INVALID, 5829 NL80211_ATTR_COALESCE_RULE_DELAY, 5830 NL80211_ATTR_COALESCE_RULE_CONDITION, 5831 NL80211_ATTR_COALESCE_RULE_PKT_PATTERN, 5832 5833 /* keep last */ 5834 NUM_NL80211_ATTR_COALESCE_RULE, 5835 NL80211_ATTR_COALESCE_RULE_MAX = NUM_NL80211_ATTR_COALESCE_RULE - 1 5836 }; 5837 5838 /** 5839 * enum nl80211_coalesce_condition - coalesce rule conditions 5840 * @NL80211_COALESCE_CONDITION_MATCH: coalaesce Rx packets when patterns 5841 * in a rule are matched. 5842 * @NL80211_COALESCE_CONDITION_NO_MATCH: coalesce Rx packets when patterns 5843 * in a rule are not matched. 5844 */ 5845 enum nl80211_coalesce_condition { 5846 NL80211_COALESCE_CONDITION_MATCH, 5847 NL80211_COALESCE_CONDITION_NO_MATCH 5848 }; 5849 5850 /** 5851 * enum nl80211_iface_limit_attrs - limit attributes 5852 * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) 5853 * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that 5854 * can be chosen from this set of interface types (u32) 5855 * @NL80211_IFACE_LIMIT_TYPES: nested attribute containing a 5856 * flag attribute for each interface type in this set 5857 * @NUM_NL80211_IFACE_LIMIT: number of attributes 5858 * @MAX_NL80211_IFACE_LIMIT: highest attribute number 5859 */ 5860 enum nl80211_iface_limit_attrs { 5861 NL80211_IFACE_LIMIT_UNSPEC, 5862 NL80211_IFACE_LIMIT_MAX, 5863 NL80211_IFACE_LIMIT_TYPES, 5864 5865 /* keep last */ 5866 NUM_NL80211_IFACE_LIMIT, 5867 MAX_NL80211_IFACE_LIMIT = NUM_NL80211_IFACE_LIMIT - 1 5868 }; 5869 5870 /** 5871 * enum nl80211_if_combination_attrs -- interface combination attributes 5872 * 5873 * @NL80211_IFACE_COMB_UNSPEC: (reserved) 5874 * @NL80211_IFACE_COMB_LIMITS: Nested attributes containing the limits 5875 * for given interface types, see &enum nl80211_iface_limit_attrs. 5876 * @NL80211_IFACE_COMB_MAXNUM: u32 attribute giving the total number of 5877 * interfaces that can be created in this group. This number doesn't 5878 * apply to interfaces purely managed in software, which are listed 5879 * in a separate attribute %NL80211_ATTR_INTERFACES_SOFTWARE. 5880 * @NL80211_IFACE_COMB_STA_AP_BI_MATCH: flag attribute specifying that 5881 * beacon intervals within this group must be all the same even for 5882 * infrastructure and AP/GO combinations, i.e. the GO(s) must adopt 5883 * the infrastructure network's beacon interval. 5884 * @NL80211_IFACE_COMB_NUM_CHANNELS: u32 attribute specifying how many 5885 * different channels may be used within this group. 5886 * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap 5887 * of supported channel widths for radar detection. 5888 * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap 5889 * of supported regulatory regions for radar detection. 5890 * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of 5891 * different beacon intervals supported by all the interface combinations 5892 * in this group (if not present, all beacon intervals be identical). 5893 * @NUM_NL80211_IFACE_COMB: number of attributes 5894 * @MAX_NL80211_IFACE_COMB: highest attribute number 5895 * 5896 * Examples: 5897 * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 5898 * => allows an AP and a STA that must match BIs 5899 * 5900 * numbers = [ #{AP, P2P-GO} <= 8 ], BI min gcd, channels = 1, max = 8, 5901 * => allows 8 of AP/GO that can have BI gcd >= min gcd 5902 * 5903 * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 5904 * => allows two STAs on the same or on different channels 5905 * 5906 * numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4 5907 * => allows a STA plus three P2P interfaces 5908 * 5909 * The list of these four possibilities could completely be contained 5910 * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate 5911 * that any of these groups must match. 5912 * 5913 * "Combinations" of just a single interface will not be listed here, 5914 * a single interface of any valid interface type is assumed to always 5915 * be possible by itself. This means that implicitly, for each valid 5916 * interface type, the following group always exists: 5917 * numbers = [ #{<type>} <= 1 ], channels = 1, max = 1 5918 */ 5919 enum nl80211_if_combination_attrs { 5920 NL80211_IFACE_COMB_UNSPEC, 5921 NL80211_IFACE_COMB_LIMITS, 5922 NL80211_IFACE_COMB_MAXNUM, 5923 NL80211_IFACE_COMB_STA_AP_BI_MATCH, 5924 NL80211_IFACE_COMB_NUM_CHANNELS, 5925 NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, 5926 NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, 5927 NL80211_IFACE_COMB_BI_MIN_GCD, 5928 5929 /* keep last */ 5930 NUM_NL80211_IFACE_COMB, 5931 MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1 5932 }; 5933 5934 5935 /** 5936 * enum nl80211_plink_state - state of a mesh peer link finite state machine 5937 * 5938 * @NL80211_PLINK_LISTEN: initial state, considered the implicit 5939 * state of non existent mesh peer links 5940 * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to 5941 * this mesh peer 5942 * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received 5943 * from this mesh peer 5944 * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been 5945 * received from this mesh peer 5946 * @NL80211_PLINK_ESTAB: mesh peer link is established 5947 * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled 5948 * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh 5949 * plink are discarded, except for authentication frames 5950 * @NUM_NL80211_PLINK_STATES: number of peer link states 5951 * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states 5952 */ 5953 enum nl80211_plink_state { 5954 NL80211_PLINK_LISTEN, 5955 NL80211_PLINK_OPN_SNT, 5956 NL80211_PLINK_OPN_RCVD, 5957 NL80211_PLINK_CNF_RCVD, 5958 NL80211_PLINK_ESTAB, 5959 NL80211_PLINK_HOLDING, 5960 NL80211_PLINK_BLOCKED, 5961 5962 /* keep last */ 5963 NUM_NL80211_PLINK_STATES, 5964 MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 5965 }; 5966 5967 /** 5968 * enum nl80211_plink_action - actions to perform in mesh peers 5969 * 5970 * @NL80211_PLINK_ACTION_NO_ACTION: perform no action 5971 * @NL80211_PLINK_ACTION_OPEN: start mesh peer link establishment 5972 * @NL80211_PLINK_ACTION_BLOCK: block traffic from this mesh peer 5973 * @NUM_NL80211_PLINK_ACTIONS: number of possible actions 5974 */ 5975 enum plink_actions { 5976 NL80211_PLINK_ACTION_NO_ACTION, 5977 NL80211_PLINK_ACTION_OPEN, 5978 NL80211_PLINK_ACTION_BLOCK, 5979 5980 NUM_NL80211_PLINK_ACTIONS, 5981 }; 5982 5983 5984 #define NL80211_KCK_LEN 16 5985 #define NL80211_KEK_LEN 16 5986 #define NL80211_KCK_EXT_LEN 24 5987 #define NL80211_KEK_EXT_LEN 32 5988 #define NL80211_KCK_EXT_LEN_32 32 5989 #define NL80211_REPLAY_CTR_LEN 8 5990 5991 /** 5992 * enum nl80211_rekey_data - attributes for GTK rekey offload 5993 * @__NL80211_REKEY_DATA_INVALID: invalid number for nested attributes 5994 * @NL80211_REKEY_DATA_KEK: key encryption key (binary) 5995 * @NL80211_REKEY_DATA_KCK: key confirmation key (binary) 5996 * @NL80211_REKEY_DATA_REPLAY_CTR: replay counter (binary) 5997 * @NL80211_REKEY_DATA_AKM: AKM data (OUI, suite type) 5998 * @NUM_NL80211_REKEY_DATA: number of rekey attributes (internal) 5999 * @MAX_NL80211_REKEY_DATA: highest rekey attribute (internal) 6000 */ 6001 enum nl80211_rekey_data { 6002 __NL80211_REKEY_DATA_INVALID, 6003 NL80211_REKEY_DATA_KEK, 6004 NL80211_REKEY_DATA_KCK, 6005 NL80211_REKEY_DATA_REPLAY_CTR, 6006 NL80211_REKEY_DATA_AKM, 6007 6008 /* keep last */ 6009 NUM_NL80211_REKEY_DATA, 6010 MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 6011 }; 6012 6013 /** 6014 * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID 6015 * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in 6016 * Beacon frames) 6017 * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element 6018 * in Beacon frames 6019 * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID 6020 * element in Beacon frames but zero out each byte in the SSID 6021 */ 6022 enum nl80211_hidden_ssid { 6023 NL80211_HIDDEN_SSID_NOT_IN_USE, 6024 NL80211_HIDDEN_SSID_ZERO_LEN, 6025 NL80211_HIDDEN_SSID_ZERO_CONTENTS 6026 }; 6027 6028 /** 6029 * enum nl80211_sta_wme_attr - station WME attributes 6030 * @__NL80211_STA_WME_INVALID: invalid number for nested attribute 6031 * @NL80211_STA_WME_UAPSD_QUEUES: bitmap of uapsd queues. the format 6032 * is the same as the AC bitmap in the QoS info field. 6033 * @NL80211_STA_WME_MAX_SP: max service period. the format is the same 6034 * as the MAX_SP field in the QoS info field (but already shifted down). 6035 * @__NL80211_STA_WME_AFTER_LAST: internal 6036 * @NL80211_STA_WME_MAX: highest station WME attribute 6037 */ 6038 enum nl80211_sta_wme_attr { 6039 __NL80211_STA_WME_INVALID, 6040 NL80211_STA_WME_UAPSD_QUEUES, 6041 NL80211_STA_WME_MAX_SP, 6042 6043 /* keep last */ 6044 __NL80211_STA_WME_AFTER_LAST, 6045 NL80211_STA_WME_MAX = __NL80211_STA_WME_AFTER_LAST - 1 6046 }; 6047 6048 /** 6049 * enum nl80211_pmksa_candidate_attr - attributes for PMKSA caching candidates 6050 * @__NL80211_PMKSA_CANDIDATE_INVALID: invalid number for nested attributes 6051 * @NL80211_PMKSA_CANDIDATE_INDEX: candidate index (u32; the smaller, the higher 6052 * priority) 6053 * @NL80211_PMKSA_CANDIDATE_BSSID: candidate BSSID (6 octets) 6054 * @NL80211_PMKSA_CANDIDATE_PREAUTH: RSN pre-authentication supported (flag) 6055 * @NUM_NL80211_PMKSA_CANDIDATE: number of PMKSA caching candidate attributes 6056 * (internal) 6057 * @MAX_NL80211_PMKSA_CANDIDATE: highest PMKSA caching candidate attribute 6058 * (internal) 6059 */ 6060 enum nl80211_pmksa_candidate_attr { 6061 __NL80211_PMKSA_CANDIDATE_INVALID, 6062 NL80211_PMKSA_CANDIDATE_INDEX, 6063 NL80211_PMKSA_CANDIDATE_BSSID, 6064 NL80211_PMKSA_CANDIDATE_PREAUTH, 6065 6066 /* keep last */ 6067 NUM_NL80211_PMKSA_CANDIDATE, 6068 MAX_NL80211_PMKSA_CANDIDATE = NUM_NL80211_PMKSA_CANDIDATE - 1 6069 }; 6070 6071 /** 6072 * enum nl80211_tdls_operation - values for %NL80211_ATTR_TDLS_OPERATION 6073 * @NL80211_TDLS_DISCOVERY_REQ: Send a TDLS discovery request 6074 * @NL80211_TDLS_SETUP: Setup TDLS link 6075 * @NL80211_TDLS_TEARDOWN: Teardown a TDLS link which is already established 6076 * @NL80211_TDLS_ENABLE_LINK: Enable TDLS link 6077 * @NL80211_TDLS_DISABLE_LINK: Disable TDLS link 6078 */ 6079 enum nl80211_tdls_operation { 6080 NL80211_TDLS_DISCOVERY_REQ, 6081 NL80211_TDLS_SETUP, 6082 NL80211_TDLS_TEARDOWN, 6083 NL80211_TDLS_ENABLE_LINK, 6084 NL80211_TDLS_DISABLE_LINK, 6085 }; 6086 6087 /** 6088 * enum nl80211_ap_sme_features - device-integrated AP features 6089 * @NL80211_AP_SME_SA_QUERY_OFFLOAD: SA Query procedures offloaded to driver 6090 * when user space indicates support for SA Query procedures offload during 6091 * "start ap" with %NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT. 6092 */ 6093 enum nl80211_ap_sme_features { 6094 NL80211_AP_SME_SA_QUERY_OFFLOAD = 1 << 0, 6095 }; 6096 6097 /** 6098 * enum nl80211_feature_flags - device/driver features 6099 * @NL80211_FEATURE_SK_TX_STATUS: This driver supports reflecting back 6100 * TX status to the socket error queue when requested with the 6101 * socket option. 6102 * @NL80211_FEATURE_HT_IBSS: This driver supports IBSS with HT datarates. 6103 * @NL80211_FEATURE_INACTIVITY_TIMER: This driver takes care of freeing up 6104 * the connected inactive stations in AP mode. 6105 * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested 6106 * to work properly to support receiving regulatory hints from 6107 * cellular base stations. 6108 * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: (no longer available, only 6109 * here to reserve the value for API/ABI compatibility) 6110 * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of 6111 * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station 6112 * mode 6113 * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan 6114 * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported 6115 * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif 6116 * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting 6117 * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform 6118 * OBSS scans and generate 20/40 BSS coex reports. This flag is used only 6119 * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. 6120 * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window 6121 * setting 6122 * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic 6123 * powersave 6124 * @NL80211_FEATURE_FULL_AP_CLIENT_STATE: The driver supports full state 6125 * transitions for AP clients. Without this flag (and if the driver 6126 * doesn't have the AP SME in the device) the driver supports adding 6127 * stations only when they're associated and adds them in associated 6128 * state (to later be transitioned into authorized), with this flag 6129 * they should be added before even sending the authentication reply 6130 * and then transitioned into authenticated, associated and authorized 6131 * states using station flags. 6132 * Note that even for drivers that support this, the default is to add 6133 * stations in authenticated/associated state, so to add unauthenticated 6134 * stations the authenticated/associated bits have to be set in the mask. 6135 * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits 6136 * (HT40, VHT 80/160 MHz) if this flag is set 6137 * @NL80211_FEATURE_USERSPACE_MPM: This driver supports a userspace Mesh 6138 * Peering Management entity which may be implemented by registering for 6139 * beacons or NL80211_CMD_NEW_PEER_CANDIDATE events. The mesh beacon is 6140 * still generated by the driver. 6141 * @NL80211_FEATURE_ACTIVE_MONITOR: This driver supports an active monitor 6142 * interface. An active monitor interface behaves like a normal monitor 6143 * interface, but gets added to the driver. It ensures that incoming 6144 * unicast packets directed at the configured interface address get ACKed. 6145 * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic 6146 * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the 6147 * lifetime of a BSS. 6148 * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter 6149 * Set IE to probe requests. 6150 * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE 6151 * to probe requests. 6152 * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period 6153 * requests sent to it by an AP. 6154 * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the 6155 * current tx power value into the TPC Report IE in the spectrum 6156 * management TPC Report action frame, and in the Radio Measurement Link 6157 * Measurement Report action frame. 6158 * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout 6159 * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used 6160 * to enable dynack. 6161 * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial 6162 * multiplexing powersave, ie. can turn off all but one chain 6163 * even on HT connections that should be using more chains. 6164 * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial 6165 * multiplexing powersave, ie. can turn off all but one chain 6166 * and then wake the rest up as required after, for example, 6167 * rts/cts handshake. 6168 * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM 6169 * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS 6170 * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it 6171 * needs to be able to handle Block-Ack agreements and other things. 6172 * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring 6173 * the vif's MAC address upon creation. 6174 * See 'macaddr' field in the vif_params (cfg80211.h). 6175 * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when 6176 * operating as a TDLS peer. 6177 * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a 6178 * random MAC address during scan (if the device is unassociated); the 6179 * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC 6180 * address mask/value will be used. 6181 * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports 6182 * using a random MAC address for every scan iteration during scheduled 6183 * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may 6184 * be set for scheduled scan and the MAC address mask/value will be used. 6185 * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a 6186 * random MAC address for every scan iteration during "net detect", i.e. 6187 * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may 6188 * be set for scheduled scan and the MAC address mask/value will be used. 6189 */ 6190 enum nl80211_feature_flags { 6191 NL80211_FEATURE_SK_TX_STATUS = 1 << 0, 6192 NL80211_FEATURE_HT_IBSS = 1 << 1, 6193 NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, 6194 NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, 6195 NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, 6196 NL80211_FEATURE_SAE = 1 << 5, 6197 NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, 6198 NL80211_FEATURE_SCAN_FLUSH = 1 << 7, 6199 NL80211_FEATURE_AP_SCAN = 1 << 8, 6200 NL80211_FEATURE_VIF_TXPOWER = 1 << 9, 6201 NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, 6202 NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, 6203 NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, 6204 /* bit 13 is reserved */ 6205 NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, 6206 NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, 6207 NL80211_FEATURE_USERSPACE_MPM = 1 << 16, 6208 NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, 6209 NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, 6210 NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, 6211 NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, 6212 NL80211_FEATURE_QUIET = 1 << 21, 6213 NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, 6214 NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, 6215 NL80211_FEATURE_STATIC_SMPS = 1 << 24, 6216 NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, 6217 NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26, 6218 NL80211_FEATURE_MAC_ON_CREATE = 1 << 27, 6219 NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, 6220 NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, 6221 NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, 6222 NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1U << 31, 6223 }; 6224 6225 /** 6226 * enum nl80211_ext_feature_index - bit index of extended features. 6227 * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. 6228 * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can 6229 * request to use RRM (see %NL80211_ATTR_USE_RRM) with 6230 * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set 6231 * the ASSOC_REQ_USE_RRM flag in the association request even if 6232 * NL80211_FEATURE_QUIET is not advertized. 6233 * @NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER: This device supports MU-MIMO air 6234 * sniffer which means that it can be configured to hear packets from 6235 * certain groups which can be configured by the 6236 * %NL80211_ATTR_MU_MIMO_GROUP_DATA attribute, 6237 * or can be configured to follow a station by configuring the 6238 * %NL80211_ATTR_MU_MIMO_FOLLOW_MAC_ADDR attribute. 6239 * @NL80211_EXT_FEATURE_SCAN_START_TIME: This driver includes the actual 6240 * time the scan started in scan results event. The time is the TSF of 6241 * the BSS that the interface that requested the scan is connected to 6242 * (if available). 6243 * @NL80211_EXT_FEATURE_BSS_PARENT_TSF: Per BSS, this driver reports the 6244 * time the last beacon/probe was received. The time is the TSF of the 6245 * BSS that the interface that requested the scan is connected to 6246 * (if available). 6247 * @NL80211_EXT_FEATURE_SET_SCAN_DWELL: This driver supports configuration of 6248 * channel dwell time. 6249 * @NL80211_EXT_FEATURE_BEACON_RATE_LEGACY: Driver supports beacon rate 6250 * configuration (AP/mesh), supporting a legacy (non HT/VHT) rate. 6251 * @NL80211_EXT_FEATURE_BEACON_RATE_HT: Driver supports beacon rate 6252 * configuration (AP/mesh) with HT rates. 6253 * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate 6254 * configuration (AP/mesh) with VHT rates. 6255 * @NL80211_EXT_FEATURE_FILS_STA: This driver supports Fast Initial Link Setup 6256 * with user space SME (NL80211_CMD_AUTHENTICATE) in station mode. 6257 * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA: This driver supports randomized TA 6258 * in @NL80211_CMD_FRAME while not associated. 6259 * @NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED: This driver supports 6260 * randomized TA in @NL80211_CMD_FRAME while associated. 6261 * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan 6262 * for reporting BSSs with better RSSI than the current connected BSS 6263 * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI). 6264 * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the 6265 * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more 6266 * RSSI threshold values to monitor rather than exactly one threshold. 6267 * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key 6268 * authentication with %NL80211_CMD_CONNECT. 6269 * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way 6270 * handshake with PSK in station mode (PSK is passed as part of the connect 6271 * and associate commands), doing it in the host might not be supported. 6272 * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way 6273 * handshake with 802.1X in station mode (will pass EAP frames to the host 6274 * and accept the set_pmk/del_pmk commands), doing it in the host might not 6275 * be supported. 6276 * @NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME: Driver is capable of overriding 6277 * the max channel attribute in the FILS request params IE with the 6278 * actual dwell time. 6279 * @NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP: Driver accepts broadcast probe 6280 * response 6281 * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE: Driver supports sending 6282 * the first probe request in each channel at rate of at least 5.5Mbps. 6283 * @NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: Driver supports 6284 * probe request tx deferral and suppression 6285 * @NL80211_EXT_FEATURE_MFP_OPTIONAL: Driver supports the %NL80211_MFP_OPTIONAL 6286 * value in %NL80211_ATTR_USE_MFP. 6287 * @NL80211_EXT_FEATURE_LOW_SPAN_SCAN: Driver supports low span scan. 6288 * @NL80211_EXT_FEATURE_LOW_POWER_SCAN: Driver supports low power scan. 6289 * @NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN: Driver supports high accuracy scan. 6290 * @NL80211_EXT_FEATURE_DFS_OFFLOAD: HW/driver will offload DFS actions. 6291 * Device or driver will do all DFS-related actions by itself, 6292 * informing user-space about CAC progress, radar detection event, 6293 * channel change triggered by radar detection event. 6294 * No need to start CAC from user-space, no need to react to 6295 * "radar detected" event. 6296 * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211: Driver supports sending and 6297 * receiving control port frames over nl80211 instead of the netdevice. 6298 * @NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT: This driver/device supports 6299 * (average) ACK signal strength reporting. 6300 * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate 6301 * TXQs. 6302 * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the 6303 * SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN. 6304 * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data 6305 * except for supported rates from the probe request content if requested 6306 * by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag. 6307 * @NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER: Driver supports enabling fine 6308 * timing measurement responder role. 6309 * 6310 * @NL80211_EXT_FEATURE_CAN_REPLACE_PTK0: Driver/device confirm that they are 6311 * able to rekey an in-use key correctly. Userspace must not rekey PTK keys 6312 * if this flag is not set. Ignoring this can leak clear text packets and/or 6313 * freeze the connection. 6314 * @NL80211_EXT_FEATURE_EXT_KEY_ID: Driver supports "Extended Key ID for 6315 * Individually Addressed Frames" from IEEE802.11-2016. 6316 * 6317 * @NL80211_EXT_FEATURE_AIRTIME_FAIRNESS: Driver supports getting airtime 6318 * fairness for transmitted packets and has enabled airtime fairness 6319 * scheduling. 6320 * 6321 * @NL80211_EXT_FEATURE_AP_PMKSA_CACHING: Driver/device supports PMKSA caching 6322 * (set/del PMKSA operations) in AP mode. 6323 * 6324 * @NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD: Driver supports 6325 * filtering of sched scan results using band specific RSSI thresholds. 6326 * 6327 * @NL80211_EXT_FEATURE_STA_TX_PWR: This driver supports controlling tx power 6328 * to a station. 6329 * 6330 * @NL80211_EXT_FEATURE_SAE_OFFLOAD: Device wants to do SAE authentication in 6331 * station mode (SAE password is passed as part of the connect command). 6332 * 6333 * @NL80211_EXT_FEATURE_VLAN_OFFLOAD: The driver supports a single netdev 6334 * with VLAN tagged frames and separate VLAN-specific netdevs added using 6335 * vconfig similarly to the Ethernet case. 6336 * 6337 * @NL80211_EXT_FEATURE_AQL: The driver supports the Airtime Queue Limit (AQL) 6338 * feature, which prevents bufferbloat by using the expected transmission 6339 * time to limit the amount of data buffered in the hardware. 6340 * 6341 * @NL80211_EXT_FEATURE_BEACON_PROTECTION: The driver supports Beacon protection 6342 * and can receive key configuration for BIGTK using key indexes 6 and 7. 6343 * @NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT: The driver supports Beacon 6344 * protection as a client only and cannot transmit protected beacons. 6345 * 6346 * @NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH: The driver can disable the 6347 * forwarding of preauth frames over the control port. They are then 6348 * handled as ordinary data frames. 6349 * 6350 * @NL80211_EXT_FEATURE_PROTECTED_TWT: Driver supports protected TWT frames 6351 * 6352 * @NL80211_EXT_FEATURE_DEL_IBSS_STA: The driver supports removing stations 6353 * in IBSS mode, essentially by dropping their state. 6354 * 6355 * @NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS: management frame registrations 6356 * are possible for multicast frames and those will be reported properly. 6357 * 6358 * @NL80211_EXT_FEATURE_SCAN_FREQ_KHZ: This driver supports receiving and 6359 * reporting scan request with %NL80211_ATTR_SCAN_FREQ_KHZ. In order to 6360 * report %NL80211_ATTR_SCAN_FREQ_KHZ, %NL80211_SCAN_FLAG_FREQ_KHZ must be 6361 * included in the scan request. 6362 * 6363 * @NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS: The driver 6364 * can report tx status for control port over nl80211 tx operations. 6365 * 6366 * @NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION: Driver supports Operating 6367 * Channel Validation (OCV) when using driver's SME for RSNA handshakes. 6368 * 6369 * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK: Device wants to do 4-way 6370 * handshake with PSK in AP mode (PSK is passed as part of the start AP 6371 * command). 6372 * 6373 * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication 6374 * in AP mode (SAE password is passed as part of the start AP command). 6375 * 6376 * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery 6377 * frames transmission 6378 * 6379 * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports 6380 * unsolicited broadcast probe response transmission 6381 * 6382 * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate 6383 * configuration (AP/mesh) with HE rates. 6384 * 6385 * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement 6386 * exchange protocol. 6387 * 6388 * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement 6389 * exchange protocol. 6390 * 6391 * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management 6392 * frame protection for all management frames exchanged during the 6393 * negotiation and range measurement procedure. 6394 * 6395 * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision 6396 * detection and change announcemnts. 6397 * 6398 * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports 6399 * FILS encryption and decryption for (Re)Association Request and Response 6400 * frames. Userspace has to share FILS AAD details to the driver by using 6401 * @NL80211_CMD_SET_FILS_AAD. 6402 * 6403 * @NL80211_EXT_FEATURE_RADAR_BACKGROUND: Device supports background radar/CAC 6404 * detection. 6405 * 6406 * @NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE: Device can perform a MAC address 6407 * change without having to bring the underlying network device down 6408 * first. For example, in station mode this can be used to vary the 6409 * origin MAC address prior to a connection to a new AP for privacy 6410 * or other reasons. Note that certain driver specific restrictions 6411 * might apply, e.g. no scans in progress, no offchannel operations 6412 * in progress, and no active connections. 6413 * 6414 * @NL80211_EXT_FEATURE_PUNCT: Driver supports preamble puncturing in AP mode. 6415 * 6416 * @NL80211_EXT_FEATURE_SECURE_NAN: Device supports NAN Pairing which enables 6417 * authentication, data encryption and message integrity. 6418 * 6419 * @NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA: Device supports randomized TA 6420 * in authentication and deauthentication frames sent to unassociated peer 6421 * using @NL80211_CMD_FRAME. 6422 * 6423 * @NL80211_EXT_FEATURE_OWE_OFFLOAD: Driver/Device wants to do OWE DH IE 6424 * handling in station mode. 6425 * 6426 * @NL80211_EXT_FEATURE_OWE_OFFLOAD_AP: Driver/Device wants to do OWE DH IE 6427 * handling in AP mode. 6428 * 6429 * @NUM_NL80211_EXT_FEATURES: number of extended features. 6430 * @MAX_NL80211_EXT_FEATURES: highest extended feature index. 6431 */ 6432 enum nl80211_ext_feature_index { 6433 NL80211_EXT_FEATURE_VHT_IBSS, 6434 NL80211_EXT_FEATURE_RRM, 6435 NL80211_EXT_FEATURE_MU_MIMO_AIR_SNIFFER, 6436 NL80211_EXT_FEATURE_SCAN_START_TIME, 6437 NL80211_EXT_FEATURE_BSS_PARENT_TSF, 6438 NL80211_EXT_FEATURE_SET_SCAN_DWELL, 6439 NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, 6440 NL80211_EXT_FEATURE_BEACON_RATE_HT, 6441 NL80211_EXT_FEATURE_BEACON_RATE_VHT, 6442 NL80211_EXT_FEATURE_FILS_STA, 6443 NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA, 6444 NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED, 6445 NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI, 6446 NL80211_EXT_FEATURE_CQM_RSSI_LIST, 6447 NL80211_EXT_FEATURE_FILS_SK_OFFLOAD, 6448 NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK, 6449 NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X, 6450 NL80211_EXT_FEATURE_FILS_MAX_CHANNEL_TIME, 6451 NL80211_EXT_FEATURE_ACCEPT_BCAST_PROBE_RESP, 6452 NL80211_EXT_FEATURE_OCE_PROBE_REQ_HIGH_TX_RATE, 6453 NL80211_EXT_FEATURE_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION, 6454 NL80211_EXT_FEATURE_MFP_OPTIONAL, 6455 NL80211_EXT_FEATURE_LOW_SPAN_SCAN, 6456 NL80211_EXT_FEATURE_LOW_POWER_SCAN, 6457 NL80211_EXT_FEATURE_HIGH_ACCURACY_SCAN, 6458 NL80211_EXT_FEATURE_DFS_OFFLOAD, 6459 NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211, 6460 NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, 6461 /* we renamed this - stay compatible */ 6462 NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT = NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT, 6463 NL80211_EXT_FEATURE_TXQS, 6464 NL80211_EXT_FEATURE_SCAN_RANDOM_SN, 6465 NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT, 6466 NL80211_EXT_FEATURE_CAN_REPLACE_PTK0, 6467 NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER, 6468 NL80211_EXT_FEATURE_AIRTIME_FAIRNESS, 6469 NL80211_EXT_FEATURE_AP_PMKSA_CACHING, 6470 NL80211_EXT_FEATURE_SCHED_SCAN_BAND_SPECIFIC_RSSI_THOLD, 6471 NL80211_EXT_FEATURE_EXT_KEY_ID, 6472 NL80211_EXT_FEATURE_STA_TX_PWR, 6473 NL80211_EXT_FEATURE_SAE_OFFLOAD, 6474 NL80211_EXT_FEATURE_VLAN_OFFLOAD, 6475 NL80211_EXT_FEATURE_AQL, 6476 NL80211_EXT_FEATURE_BEACON_PROTECTION, 6477 NL80211_EXT_FEATURE_CONTROL_PORT_NO_PREAUTH, 6478 NL80211_EXT_FEATURE_PROTECTED_TWT, 6479 NL80211_EXT_FEATURE_DEL_IBSS_STA, 6480 NL80211_EXT_FEATURE_MULTICAST_REGISTRATIONS, 6481 NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT, 6482 NL80211_EXT_FEATURE_SCAN_FREQ_KHZ, 6483 NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS, 6484 NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION, 6485 NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK, 6486 NL80211_EXT_FEATURE_SAE_OFFLOAD_AP, 6487 NL80211_EXT_FEATURE_FILS_DISCOVERY, 6488 NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP, 6489 NL80211_EXT_FEATURE_BEACON_RATE_HE, 6490 NL80211_EXT_FEATURE_SECURE_LTF, 6491 NL80211_EXT_FEATURE_SECURE_RTT, 6492 NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, 6493 NL80211_EXT_FEATURE_BSS_COLOR, 6494 NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, 6495 NL80211_EXT_FEATURE_RADAR_BACKGROUND, 6496 NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE, 6497 NL80211_EXT_FEATURE_PUNCT, 6498 NL80211_EXT_FEATURE_SECURE_NAN, 6499 NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA, 6500 NL80211_EXT_FEATURE_OWE_OFFLOAD, 6501 NL80211_EXT_FEATURE_OWE_OFFLOAD_AP, 6502 6503 /* add new features before the definition below */ 6504 NUM_NL80211_EXT_FEATURES, 6505 MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 6506 }; 6507 6508 /** 6509 * enum nl80211_probe_resp_offload_support_attr - optional supported 6510 * protocols for probe-response offloading by the driver/FW. 6511 * To be used with the %NL80211_ATTR_PROBE_RESP_OFFLOAD attribute. 6512 * Each enum value represents a bit in the bitmap of supported 6513 * protocols. Typically a subset of probe-requests belonging to a 6514 * supported protocol will be excluded from offload and uploaded 6515 * to the host. 6516 * 6517 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS: Support for WPS ver. 1 6518 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2: Support for WPS ver. 2 6519 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P: Support for P2P 6520 * @NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U: Support for 802.11u 6521 */ 6522 enum nl80211_probe_resp_offload_support_attr { 6523 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS = 1<<0, 6524 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 = 1<<1, 6525 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P = 1<<2, 6526 NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, 6527 }; 6528 6529 /** 6530 * enum nl80211_connect_failed_reason - connection request failed reasons 6531 * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be 6532 * handled by the AP is reached. 6533 * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Connection request is rejected due to ACL. 6534 */ 6535 enum nl80211_connect_failed_reason { 6536 NL80211_CONN_FAIL_MAX_CLIENTS, 6537 NL80211_CONN_FAIL_BLOCKED_CLIENT, 6538 }; 6539 6540 /** 6541 * enum nl80211_timeout_reason - timeout reasons 6542 * 6543 * @NL80211_TIMEOUT_UNSPECIFIED: Timeout reason unspecified. 6544 * @NL80211_TIMEOUT_SCAN: Scan (AP discovery) timed out. 6545 * @NL80211_TIMEOUT_AUTH: Authentication timed out. 6546 * @NL80211_TIMEOUT_ASSOC: Association timed out. 6547 */ 6548 enum nl80211_timeout_reason { 6549 NL80211_TIMEOUT_UNSPECIFIED, 6550 NL80211_TIMEOUT_SCAN, 6551 NL80211_TIMEOUT_AUTH, 6552 NL80211_TIMEOUT_ASSOC, 6553 }; 6554 6555 /** 6556 * enum nl80211_scan_flags - scan request control flags 6557 * 6558 * Scan request control flags are used to control the handling 6559 * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN 6560 * requests. 6561 * 6562 * NL80211_SCAN_FLAG_LOW_SPAN, NL80211_SCAN_FLAG_LOW_POWER, and 6563 * NL80211_SCAN_FLAG_HIGH_ACCURACY flags are exclusive of each other, i.e., only 6564 * one of them can be used in the request. 6565 * 6566 * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority 6567 * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning 6568 * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured 6569 * as AP and the beaconing has already been configured. This attribute is 6570 * dangerous because will destroy stations performance as a lot of frames 6571 * will be lost while scanning off-channel, therefore it must be used only 6572 * when really needed 6573 * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or 6574 * for scheduled scan: a different one for every scan iteration). When the 6575 * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and 6576 * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only 6577 * the masked bits will be preserved from the MAC address and the remainder 6578 * randomised. If the attributes are not given full randomisation (46 bits, 6579 * locally administered 1, multicast 0) is assumed. 6580 * This flag must not be requested when the feature isn't supported, check 6581 * the nl80211 feature flags for the device. 6582 * @NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME: fill the dwell time in the FILS 6583 * request parameters IE in the probe request 6584 * @NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP: accept broadcast probe responses 6585 * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE: send probe request frames at 6586 * rate of at least 5.5M. In case non OCE AP is discovered in the channel, 6587 * only the first probe req in the channel will be sent in high rate. 6588 * @NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION: allow probe request 6589 * tx deferral (dot11FILSProbeDelay shall be set to 15ms) 6590 * and suppression (if it has received a broadcast Probe Response frame, 6591 * Beacon frame or FILS Discovery frame from an AP that the STA considers 6592 * a suitable candidate for (re-)association - suitable in terms of 6593 * SSID and/or RSSI. 6594 * @NL80211_SCAN_FLAG_LOW_SPAN: Span corresponds to the total time taken to 6595 * accomplish the scan. Thus, this flag intends the driver to perform the 6596 * scan request with lesser span/duration. It is specific to the driver 6597 * implementations on how this is accomplished. Scan accuracy may get 6598 * impacted with this flag. 6599 * @NL80211_SCAN_FLAG_LOW_POWER: This flag intends the scan attempts to consume 6600 * optimal possible power. Drivers can resort to their specific means to 6601 * optimize the power. Scan accuracy may get impacted with this flag. 6602 * @NL80211_SCAN_FLAG_HIGH_ACCURACY: Accuracy here intends to the extent of scan 6603 * results obtained. Thus HIGH_ACCURACY scan flag aims to get maximum 6604 * possible scan results. This flag hints the driver to use the best 6605 * possible scan configuration to improve the accuracy in scanning. 6606 * Latency and power use may get impacted with this flag. 6607 * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe 6608 * request frames from this scan to avoid correlation/tracking being 6609 * possible. 6610 * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to 6611 * only have supported rates and no additional capabilities (unless 6612 * added by userspace explicitly.) 6613 * @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with 6614 * %NL80211_ATTR_SCAN_FREQ_KHZ. This also means 6615 * %NL80211_ATTR_SCAN_FREQUENCIES will not be included. 6616 * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for collocated APs reported by 6617 * 2.4/5 GHz APs. When the flag is set, the scan logic will use the 6618 * information from the RNR element found in beacons/probe responses 6619 * received on the 2.4/5 GHz channels to actively scan only the 6GHz 6620 * channels on which APs are expected to be found. Note that when not set, 6621 * the scan logic would scan all 6GHz channels, but since transmission of 6622 * probe requests on non PSC channels is limited, it is highly likely that 6623 * these channels would passively be scanned. Also note that when the flag 6624 * is set, in addition to the colocated APs, PSC channels would also be 6625 * scanned if the user space has asked for it. 6626 */ 6627 enum nl80211_scan_flags { 6628 NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, 6629 NL80211_SCAN_FLAG_FLUSH = 1<<1, 6630 NL80211_SCAN_FLAG_AP = 1<<2, 6631 NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, 6632 NL80211_SCAN_FLAG_FILS_MAX_CHANNEL_TIME = 1<<4, 6633 NL80211_SCAN_FLAG_ACCEPT_BCAST_PROBE_RESP = 1<<5, 6634 NL80211_SCAN_FLAG_OCE_PROBE_REQ_HIGH_TX_RATE = 1<<6, 6635 NL80211_SCAN_FLAG_OCE_PROBE_REQ_DEFERRAL_SUPPRESSION = 1<<7, 6636 NL80211_SCAN_FLAG_LOW_SPAN = 1<<8, 6637 NL80211_SCAN_FLAG_LOW_POWER = 1<<9, 6638 NL80211_SCAN_FLAG_HIGH_ACCURACY = 1<<10, 6639 NL80211_SCAN_FLAG_RANDOM_SN = 1<<11, 6640 NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12, 6641 NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13, 6642 NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14, 6643 }; 6644 6645 /** 6646 * enum nl80211_acl_policy - access control policy 6647 * 6648 * Access control policy is applied on a MAC list set by 6649 * %NL80211_CMD_START_AP and %NL80211_CMD_SET_MAC_ACL, to 6650 * be used with %NL80211_ATTR_ACL_POLICY. 6651 * 6652 * @NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED: Deny stations which are 6653 * listed in ACL, i.e. allow all the stations which are not listed 6654 * in ACL to authenticate. 6655 * @NL80211_ACL_POLICY_DENY_UNLESS_LISTED: Allow the stations which are listed 6656 * in ACL, i.e. deny all the stations which are not listed in ACL. 6657 */ 6658 enum nl80211_acl_policy { 6659 NL80211_ACL_POLICY_ACCEPT_UNLESS_LISTED, 6660 NL80211_ACL_POLICY_DENY_UNLESS_LISTED, 6661 }; 6662 6663 /** 6664 * enum nl80211_smps_mode - SMPS mode 6665 * 6666 * Requested SMPS mode (for AP mode) 6667 * 6668 * @NL80211_SMPS_OFF: SMPS off (use all antennas). 6669 * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) 6670 * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and 6671 * turn on other antennas after CTS/RTS). 6672 */ 6673 enum nl80211_smps_mode { 6674 NL80211_SMPS_OFF, 6675 NL80211_SMPS_STATIC, 6676 NL80211_SMPS_DYNAMIC, 6677 6678 __NL80211_SMPS_AFTER_LAST, 6679 NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 6680 }; 6681 6682 /** 6683 * enum nl80211_radar_event - type of radar event for DFS operation 6684 * 6685 * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace 6686 * about detected radars or success of the channel available check (CAC) 6687 * 6688 * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is 6689 * now unusable. 6690 * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, 6691 * the channel is now available. 6692 * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no 6693 * change to the channel status. 6694 * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is 6695 * over, channel becomes usable. 6696 * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this 6697 * non-operating channel is expired and no longer valid. New CAC must 6698 * be done on this channel before starting the operation. This is not 6699 * applicable for ETSI dfs domain where pre-CAC is valid for ever. 6700 * @NL80211_RADAR_CAC_STARTED: Channel Availability Check has been started, 6701 * should be generated by HW if NL80211_EXT_FEATURE_DFS_OFFLOAD is enabled. 6702 */ 6703 enum nl80211_radar_event { 6704 NL80211_RADAR_DETECTED, 6705 NL80211_RADAR_CAC_FINISHED, 6706 NL80211_RADAR_CAC_ABORTED, 6707 NL80211_RADAR_NOP_FINISHED, 6708 NL80211_RADAR_PRE_CAC_EXPIRED, 6709 NL80211_RADAR_CAC_STARTED, 6710 }; 6711 6712 /** 6713 * enum nl80211_dfs_state - DFS states for channels 6714 * 6715 * Channel states used by the DFS code. 6716 * 6717 * @NL80211_DFS_USABLE: The channel can be used, but channel availability 6718 * check (CAC) must be performed before using it for AP or IBSS. 6719 * @NL80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it 6720 * is therefore marked as not available. 6721 * @NL80211_DFS_AVAILABLE: The channel has been CAC checked and is available. 6722 */ 6723 enum nl80211_dfs_state { 6724 NL80211_DFS_USABLE, 6725 NL80211_DFS_UNAVAILABLE, 6726 NL80211_DFS_AVAILABLE, 6727 }; 6728 6729 /** 6730 * enum nl80211_protocol_features - nl80211 protocol features 6731 * @NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP: nl80211 supports splitting 6732 * wiphy dumps (if requested by the application with the attribute 6733 * %NL80211_ATTR_SPLIT_WIPHY_DUMP. Also supported is filtering the 6734 * wiphy dump by %NL80211_ATTR_WIPHY, %NL80211_ATTR_IFINDEX or 6735 * %NL80211_ATTR_WDEV. 6736 */ 6737 enum nl80211_protocol_features { 6738 NL80211_PROTOCOL_FEATURE_SPLIT_WIPHY_DUMP = 1 << 0, 6739 }; 6740 6741 /** 6742 * enum nl80211_crit_proto_id - nl80211 critical protocol identifiers 6743 * 6744 * @NL80211_CRIT_PROTO_UNSPEC: protocol unspecified. 6745 * @NL80211_CRIT_PROTO_DHCP: BOOTP or DHCPv6 protocol. 6746 * @NL80211_CRIT_PROTO_EAPOL: EAPOL protocol. 6747 * @NL80211_CRIT_PROTO_APIPA: APIPA protocol. 6748 * @NUM_NL80211_CRIT_PROTO: must be kept last. 6749 */ 6750 enum nl80211_crit_proto_id { 6751 NL80211_CRIT_PROTO_UNSPEC, 6752 NL80211_CRIT_PROTO_DHCP, 6753 NL80211_CRIT_PROTO_EAPOL, 6754 NL80211_CRIT_PROTO_APIPA, 6755 /* add other protocols before this one */ 6756 NUM_NL80211_CRIT_PROTO 6757 }; 6758 6759 /* maximum duration for critical protocol measures */ 6760 #define NL80211_CRIT_PROTO_MAX_DURATION 5000 /* msec */ 6761 6762 /** 6763 * enum nl80211_rxmgmt_flags - flags for received management frame. 6764 * 6765 * Used by cfg80211_rx_mgmt() 6766 * 6767 * @NL80211_RXMGMT_FLAG_ANSWERED: frame was answered by device/driver. 6768 * @NL80211_RXMGMT_FLAG_EXTERNAL_AUTH: Host driver intends to offload 6769 * the authentication. Exclusively defined for host drivers that 6770 * advertises the SME functionality but would like the userspace 6771 * to handle certain authentication algorithms (e.g. SAE). 6772 */ 6773 enum nl80211_rxmgmt_flags { 6774 NL80211_RXMGMT_FLAG_ANSWERED = 1 << 0, 6775 NL80211_RXMGMT_FLAG_EXTERNAL_AUTH = 1 << 1, 6776 }; 6777 6778 /* 6779 * If this flag is unset, the lower 24 bits are an OUI, if set 6780 * a Linux nl80211 vendor ID is used (no such IDs are allocated 6781 * yet, so that's not valid so far) 6782 */ 6783 #define NL80211_VENDOR_ID_IS_LINUX 0x80000000 6784 6785 /** 6786 * struct nl80211_vendor_cmd_info - vendor command data 6787 * @vendor_id: If the %NL80211_VENDOR_ID_IS_LINUX flag is clear, then the 6788 * value is a 24-bit OUI; if it is set then a separately allocated ID 6789 * may be used, but no such IDs are allocated yet. New IDs should be 6790 * added to this file when needed. 6791 * @subcmd: sub-command ID for the command 6792 */ 6793 struct nl80211_vendor_cmd_info { 6794 __u32 vendor_id; 6795 __u32 subcmd; 6796 }; 6797 6798 /** 6799 * enum nl80211_tdls_peer_capability - TDLS peer flags. 6800 * 6801 * Used by tdls_mgmt() to determine which conditional elements need 6802 * to be added to TDLS Setup frames. 6803 * 6804 * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. 6805 * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. 6806 * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. 6807 * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable. 6808 */ 6809 enum nl80211_tdls_peer_capability { 6810 NL80211_TDLS_PEER_HT = 1<<0, 6811 NL80211_TDLS_PEER_VHT = 1<<1, 6812 NL80211_TDLS_PEER_WMM = 1<<2, 6813 NL80211_TDLS_PEER_HE = 1<<3, 6814 }; 6815 6816 /** 6817 * enum nl80211_sched_scan_plan - scanning plan for scheduled scan 6818 * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved 6819 * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In 6820 * seconds (u32). 6821 * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this 6822 * scan plan (u32). The last scan plan must not specify this attribute 6823 * because it will run infinitely. A value of zero is invalid as it will 6824 * make the scan plan meaningless. 6825 * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number 6826 * currently defined 6827 * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use 6828 */ 6829 enum nl80211_sched_scan_plan { 6830 __NL80211_SCHED_SCAN_PLAN_INVALID, 6831 NL80211_SCHED_SCAN_PLAN_INTERVAL, 6832 NL80211_SCHED_SCAN_PLAN_ITERATIONS, 6833 6834 /* keep last */ 6835 __NL80211_SCHED_SCAN_PLAN_AFTER_LAST, 6836 NL80211_SCHED_SCAN_PLAN_MAX = 6837 __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1 6838 }; 6839 6840 /** 6841 * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. 6842 * 6843 * @band: band of BSS that must match for RSSI value adjustment. The value 6844 * of this field is according to &enum nl80211_band. 6845 * @delta: value used to adjust the RSSI value of matching BSS in dB. 6846 */ 6847 struct nl80211_bss_select_rssi_adjust { 6848 __u8 band; 6849 __s8 delta; 6850 } __attribute__((packed)); 6851 6852 /** 6853 * enum nl80211_bss_select_attr - attributes for bss selection. 6854 * 6855 * @__NL80211_BSS_SELECT_ATTR_INVALID: reserved. 6856 * @NL80211_BSS_SELECT_ATTR_RSSI: Flag indicating only RSSI-based BSS selection 6857 * is requested. 6858 * @NL80211_BSS_SELECT_ATTR_BAND_PREF: attribute indicating BSS 6859 * selection should be done such that the specified band is preferred. 6860 * When there are multiple BSS-es in the preferred band, the driver 6861 * shall use RSSI-based BSS selection as a second step. The value of 6862 * this attribute is according to &enum nl80211_band (u32). 6863 * @NL80211_BSS_SELECT_ATTR_RSSI_ADJUST: When present the RSSI level for 6864 * BSS-es in the specified band is to be adjusted before doing 6865 * RSSI-based BSS selection. The attribute value is a packed structure 6866 * value as specified by &struct nl80211_bss_select_rssi_adjust. 6867 * @NL80211_BSS_SELECT_ATTR_MAX: highest bss select attribute number. 6868 * @__NL80211_BSS_SELECT_ATTR_AFTER_LAST: internal use. 6869 * 6870 * One and only one of these attributes are found within %NL80211_ATTR_BSS_SELECT 6871 * for %NL80211_CMD_CONNECT. It specifies the required BSS selection behaviour 6872 * which the driver shall use. 6873 */ 6874 enum nl80211_bss_select_attr { 6875 __NL80211_BSS_SELECT_ATTR_INVALID, 6876 NL80211_BSS_SELECT_ATTR_RSSI, 6877 NL80211_BSS_SELECT_ATTR_BAND_PREF, 6878 NL80211_BSS_SELECT_ATTR_RSSI_ADJUST, 6879 6880 /* keep last */ 6881 __NL80211_BSS_SELECT_ATTR_AFTER_LAST, 6882 NL80211_BSS_SELECT_ATTR_MAX = __NL80211_BSS_SELECT_ATTR_AFTER_LAST - 1 6883 }; 6884 6885 /** 6886 * enum nl80211_nan_function_type - NAN function type 6887 * 6888 * Defines the function type of a NAN function 6889 * 6890 * @NL80211_NAN_FUNC_PUBLISH: function is publish 6891 * @NL80211_NAN_FUNC_SUBSCRIBE: function is subscribe 6892 * @NL80211_NAN_FUNC_FOLLOW_UP: function is follow-up 6893 */ 6894 enum nl80211_nan_function_type { 6895 NL80211_NAN_FUNC_PUBLISH, 6896 NL80211_NAN_FUNC_SUBSCRIBE, 6897 NL80211_NAN_FUNC_FOLLOW_UP, 6898 6899 /* keep last */ 6900 __NL80211_NAN_FUNC_TYPE_AFTER_LAST, 6901 NL80211_NAN_FUNC_MAX_TYPE = __NL80211_NAN_FUNC_TYPE_AFTER_LAST - 1, 6902 }; 6903 6904 /** 6905 * enum nl80211_nan_publish_type - NAN publish tx type 6906 * 6907 * Defines how to send publish Service Discovery Frames 6908 * 6909 * @NL80211_NAN_SOLICITED_PUBLISH: publish function is solicited 6910 * @NL80211_NAN_UNSOLICITED_PUBLISH: publish function is unsolicited 6911 */ 6912 enum nl80211_nan_publish_type { 6913 NL80211_NAN_SOLICITED_PUBLISH = 1 << 0, 6914 NL80211_NAN_UNSOLICITED_PUBLISH = 1 << 1, 6915 }; 6916 6917 /** 6918 * enum nl80211_nan_func_term_reason - NAN functions termination reason 6919 * 6920 * Defines termination reasons of a NAN function 6921 * 6922 * @NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST: requested by user 6923 * @NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED: timeout 6924 * @NL80211_NAN_FUNC_TERM_REASON_ERROR: errored 6925 */ 6926 enum nl80211_nan_func_term_reason { 6927 NL80211_NAN_FUNC_TERM_REASON_USER_REQUEST, 6928 NL80211_NAN_FUNC_TERM_REASON_TTL_EXPIRED, 6929 NL80211_NAN_FUNC_TERM_REASON_ERROR, 6930 }; 6931 6932 #define NL80211_NAN_FUNC_SERVICE_ID_LEN 6 6933 #define NL80211_NAN_FUNC_SERVICE_SPEC_INFO_MAX_LEN 0xff 6934 #define NL80211_NAN_FUNC_SRF_MAX_LEN 0xff 6935 6936 /** 6937 * enum nl80211_nan_func_attributes - NAN function attributes 6938 * @__NL80211_NAN_FUNC_INVALID: invalid 6939 * @NL80211_NAN_FUNC_TYPE: &enum nl80211_nan_function_type (u8). 6940 * @NL80211_NAN_FUNC_SERVICE_ID: 6 bytes of the service ID hash as 6941 * specified in NAN spec. This is a binary attribute. 6942 * @NL80211_NAN_FUNC_PUBLISH_TYPE: relevant if the function's type is 6943 * publish. Defines the transmission type for the publish Service Discovery 6944 * Frame, see &enum nl80211_nan_publish_type. Its type is u8. 6945 * @NL80211_NAN_FUNC_PUBLISH_BCAST: relevant if the function is a solicited 6946 * publish. Should the solicited publish Service Discovery Frame be sent to 6947 * the NAN Broadcast address. This is a flag. 6948 * @NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE: relevant if the function's type is 6949 * subscribe. Is the subscribe active. This is a flag. 6950 * @NL80211_NAN_FUNC_FOLLOW_UP_ID: relevant if the function's type is follow up. 6951 * The instance ID for the follow up Service Discovery Frame. This is u8. 6952 * @NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID: relevant if the function's type 6953 * is follow up. This is a u8. 6954 * The requestor instance ID for the follow up Service Discovery Frame. 6955 * @NL80211_NAN_FUNC_FOLLOW_UP_DEST: the MAC address of the recipient of the 6956 * follow up Service Discovery Frame. This is a binary attribute. 6957 * @NL80211_NAN_FUNC_CLOSE_RANGE: is this function limited for devices in a 6958 * close range. The range itself (RSSI) is defined by the device. 6959 * This is a flag. 6960 * @NL80211_NAN_FUNC_TTL: strictly positive number of DWs this function should 6961 * stay active. If not present infinite TTL is assumed. This is a u32. 6962 * @NL80211_NAN_FUNC_SERVICE_INFO: array of bytes describing the service 6963 * specific info. This is a binary attribute. 6964 * @NL80211_NAN_FUNC_SRF: Service Receive Filter. This is a nested attribute. 6965 * See &enum nl80211_nan_srf_attributes. 6966 * @NL80211_NAN_FUNC_RX_MATCH_FILTER: Receive Matching filter. This is a nested 6967 * attribute. It is a list of binary values. 6968 * @NL80211_NAN_FUNC_TX_MATCH_FILTER: Transmit Matching filter. This is a 6969 * nested attribute. It is a list of binary values. 6970 * @NL80211_NAN_FUNC_INSTANCE_ID: The instance ID of the function. 6971 * Its type is u8 and it cannot be 0. 6972 * @NL80211_NAN_FUNC_TERM_REASON: NAN function termination reason. 6973 * See &enum nl80211_nan_func_term_reason. 6974 * 6975 * @NUM_NL80211_NAN_FUNC_ATTR: internal 6976 * @NL80211_NAN_FUNC_ATTR_MAX: highest NAN function attribute 6977 */ 6978 enum nl80211_nan_func_attributes { 6979 __NL80211_NAN_FUNC_INVALID, 6980 NL80211_NAN_FUNC_TYPE, 6981 NL80211_NAN_FUNC_SERVICE_ID, 6982 NL80211_NAN_FUNC_PUBLISH_TYPE, 6983 NL80211_NAN_FUNC_PUBLISH_BCAST, 6984 NL80211_NAN_FUNC_SUBSCRIBE_ACTIVE, 6985 NL80211_NAN_FUNC_FOLLOW_UP_ID, 6986 NL80211_NAN_FUNC_FOLLOW_UP_REQ_ID, 6987 NL80211_NAN_FUNC_FOLLOW_UP_DEST, 6988 NL80211_NAN_FUNC_CLOSE_RANGE, 6989 NL80211_NAN_FUNC_TTL, 6990 NL80211_NAN_FUNC_SERVICE_INFO, 6991 NL80211_NAN_FUNC_SRF, 6992 NL80211_NAN_FUNC_RX_MATCH_FILTER, 6993 NL80211_NAN_FUNC_TX_MATCH_FILTER, 6994 NL80211_NAN_FUNC_INSTANCE_ID, 6995 NL80211_NAN_FUNC_TERM_REASON, 6996 6997 /* keep last */ 6998 NUM_NL80211_NAN_FUNC_ATTR, 6999 NL80211_NAN_FUNC_ATTR_MAX = NUM_NL80211_NAN_FUNC_ATTR - 1 7000 }; 7001 7002 /** 7003 * enum nl80211_nan_srf_attributes - NAN Service Response filter attributes 7004 * @__NL80211_NAN_SRF_INVALID: invalid 7005 * @NL80211_NAN_SRF_INCLUDE: present if the include bit of the SRF set. 7006 * This is a flag. 7007 * @NL80211_NAN_SRF_BF: Bloom Filter. Present if and only if 7008 * %NL80211_NAN_SRF_MAC_ADDRS isn't present. This attribute is binary. 7009 * @NL80211_NAN_SRF_BF_IDX: index of the Bloom Filter. Mandatory if 7010 * %NL80211_NAN_SRF_BF is present. This is a u8. 7011 * @NL80211_NAN_SRF_MAC_ADDRS: list of MAC addresses for the SRF. Present if 7012 * and only if %NL80211_NAN_SRF_BF isn't present. This is a nested 7013 * attribute. Each nested attribute is a MAC address. 7014 * @NUM_NL80211_NAN_SRF_ATTR: internal 7015 * @NL80211_NAN_SRF_ATTR_MAX: highest NAN SRF attribute 7016 */ 7017 enum nl80211_nan_srf_attributes { 7018 __NL80211_NAN_SRF_INVALID, 7019 NL80211_NAN_SRF_INCLUDE, 7020 NL80211_NAN_SRF_BF, 7021 NL80211_NAN_SRF_BF_IDX, 7022 NL80211_NAN_SRF_MAC_ADDRS, 7023 7024 /* keep last */ 7025 NUM_NL80211_NAN_SRF_ATTR, 7026 NL80211_NAN_SRF_ATTR_MAX = NUM_NL80211_NAN_SRF_ATTR - 1, 7027 }; 7028 7029 /** 7030 * enum nl80211_nan_match_attributes - NAN match attributes 7031 * @__NL80211_NAN_MATCH_INVALID: invalid 7032 * @NL80211_NAN_MATCH_FUNC_LOCAL: the local function that had the 7033 * match. This is a nested attribute. 7034 * See &enum nl80211_nan_func_attributes. 7035 * @NL80211_NAN_MATCH_FUNC_PEER: the peer function 7036 * that caused the match. This is a nested attribute. 7037 * See &enum nl80211_nan_func_attributes. 7038 * 7039 * @NUM_NL80211_NAN_MATCH_ATTR: internal 7040 * @NL80211_NAN_MATCH_ATTR_MAX: highest NAN match attribute 7041 */ 7042 enum nl80211_nan_match_attributes { 7043 __NL80211_NAN_MATCH_INVALID, 7044 NL80211_NAN_MATCH_FUNC_LOCAL, 7045 NL80211_NAN_MATCH_FUNC_PEER, 7046 7047 /* keep last */ 7048 NUM_NL80211_NAN_MATCH_ATTR, 7049 NL80211_NAN_MATCH_ATTR_MAX = NUM_NL80211_NAN_MATCH_ATTR - 1 7050 }; 7051 7052 /** 7053 * nl80211_external_auth_action - Action to perform with external 7054 * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. 7055 * @NL80211_EXTERNAL_AUTH_START: Start the authentication. 7056 * @NL80211_EXTERNAL_AUTH_ABORT: Abort the ongoing authentication. 7057 */ 7058 enum nl80211_external_auth_action { 7059 NL80211_EXTERNAL_AUTH_START, 7060 NL80211_EXTERNAL_AUTH_ABORT, 7061 }; 7062 7063 /** 7064 * enum nl80211_ftm_responder_attributes - fine timing measurement 7065 * responder attributes 7066 * @__NL80211_FTM_RESP_ATTR_INVALID: Invalid 7067 * @NL80211_FTM_RESP_ATTR_ENABLED: FTM responder is enabled 7068 * @NL80211_FTM_RESP_ATTR_LCI: The content of Measurement Report Element 7069 * (9.4.2.22 in 802.11-2016) with type 8 - LCI (9.4.2.22.10), 7070 * i.e. starting with the measurement token 7071 * @NL80211_FTM_RESP_ATTR_CIVIC: The content of Measurement Report Element 7072 * (9.4.2.22 in 802.11-2016) with type 11 - Civic (Section 9.4.2.22.13), 7073 * i.e. starting with the measurement token 7074 * @__NL80211_FTM_RESP_ATTR_LAST: Internal 7075 * @NL80211_FTM_RESP_ATTR_MAX: highest FTM responder attribute. 7076 */ 7077 enum nl80211_ftm_responder_attributes { 7078 __NL80211_FTM_RESP_ATTR_INVALID, 7079 7080 NL80211_FTM_RESP_ATTR_ENABLED, 7081 NL80211_FTM_RESP_ATTR_LCI, 7082 NL80211_FTM_RESP_ATTR_CIVICLOC, 7083 7084 /* keep last */ 7085 __NL80211_FTM_RESP_ATTR_LAST, 7086 NL80211_FTM_RESP_ATTR_MAX = __NL80211_FTM_RESP_ATTR_LAST - 1, 7087 }; 7088 7089 /* 7090 * enum nl80211_ftm_responder_stats - FTM responder statistics 7091 * 7092 * These attribute types are used with %NL80211_ATTR_FTM_RESPONDER_STATS 7093 * when getting FTM responder statistics. 7094 * 7095 * @__NL80211_FTM_STATS_INVALID: attribute number 0 is reserved 7096 * @NL80211_FTM_STATS_SUCCESS_NUM: number of FTM sessions in which all frames 7097 * were ssfully answered (u32) 7098 * @NL80211_FTM_STATS_PARTIAL_NUM: number of FTM sessions in which part of the 7099 * frames were successfully answered (u32) 7100 * @NL80211_FTM_STATS_FAILED_NUM: number of failed FTM sessions (u32) 7101 * @NL80211_FTM_STATS_ASAP_NUM: number of ASAP sessions (u32) 7102 * @NL80211_FTM_STATS_NON_ASAP_NUM: number of non-ASAP sessions (u32) 7103 * @NL80211_FTM_STATS_TOTAL_DURATION_MSEC: total sessions durations - gives an 7104 * indication of how much time the responder was busy (u64, msec) 7105 * @NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM: number of unknown FTM triggers - 7106 * triggers from initiators that didn't finish successfully the negotiation 7107 * phase with the responder (u32) 7108 * @NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM: number of FTM reschedule requests 7109 * - initiator asks for a new scheduling although it already has scheduled 7110 * FTM slot (u32) 7111 * @NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM: number of FTM triggers out of 7112 * scheduled window (u32) 7113 * @NL80211_FTM_STATS_PAD: used for padding, ignore 7114 * @__NL80211_TXQ_ATTR_AFTER_LAST: Internal 7115 * @NL80211_FTM_STATS_MAX: highest possible FTM responder stats attribute 7116 */ 7117 enum nl80211_ftm_responder_stats { 7118 __NL80211_FTM_STATS_INVALID, 7119 NL80211_FTM_STATS_SUCCESS_NUM, 7120 NL80211_FTM_STATS_PARTIAL_NUM, 7121 NL80211_FTM_STATS_FAILED_NUM, 7122 NL80211_FTM_STATS_ASAP_NUM, 7123 NL80211_FTM_STATS_NON_ASAP_NUM, 7124 NL80211_FTM_STATS_TOTAL_DURATION_MSEC, 7125 NL80211_FTM_STATS_UNKNOWN_TRIGGERS_NUM, 7126 NL80211_FTM_STATS_RESCHEDULE_REQUESTS_NUM, 7127 NL80211_FTM_STATS_OUT_OF_WINDOW_TRIGGERS_NUM, 7128 NL80211_FTM_STATS_PAD, 7129 7130 /* keep last */ 7131 __NL80211_FTM_STATS_AFTER_LAST, 7132 NL80211_FTM_STATS_MAX = __NL80211_FTM_STATS_AFTER_LAST - 1 7133 }; 7134 7135 /** 7136 * enum nl80211_preamble - frame preamble types 7137 * @NL80211_PREAMBLE_LEGACY: legacy (HR/DSSS, OFDM, ERP PHY) preamble 7138 * @NL80211_PREAMBLE_HT: HT preamble 7139 * @NL80211_PREAMBLE_VHT: VHT preamble 7140 * @NL80211_PREAMBLE_DMG: DMG preamble 7141 * @NL80211_PREAMBLE_HE: HE preamble 7142 */ 7143 enum nl80211_preamble { 7144 NL80211_PREAMBLE_LEGACY, 7145 NL80211_PREAMBLE_HT, 7146 NL80211_PREAMBLE_VHT, 7147 NL80211_PREAMBLE_DMG, 7148 NL80211_PREAMBLE_HE, 7149 }; 7150 7151 /** 7152 * enum nl80211_peer_measurement_type - peer measurement types 7153 * @NL80211_PMSR_TYPE_INVALID: invalid/unused, needed as we use 7154 * these numbers also for attributes 7155 * 7156 * @NL80211_PMSR_TYPE_FTM: flight time measurement 7157 * 7158 * @NUM_NL80211_PMSR_TYPES: internal 7159 * @NL80211_PMSR_TYPE_MAX: highest type number 7160 */ 7161 enum nl80211_peer_measurement_type { 7162 NL80211_PMSR_TYPE_INVALID, 7163 7164 NL80211_PMSR_TYPE_FTM, 7165 7166 NUM_NL80211_PMSR_TYPES, 7167 NL80211_PMSR_TYPE_MAX = NUM_NL80211_PMSR_TYPES - 1 7168 }; 7169 7170 /** 7171 * enum nl80211_peer_measurement_status - peer measurement status 7172 * @NL80211_PMSR_STATUS_SUCCESS: measurement completed successfully 7173 * @NL80211_PMSR_STATUS_REFUSED: measurement was locally refused 7174 * @NL80211_PMSR_STATUS_TIMEOUT: measurement timed out 7175 * @NL80211_PMSR_STATUS_FAILURE: measurement failed, a type-dependent 7176 * reason may be available in the response data 7177 */ 7178 enum nl80211_peer_measurement_status { 7179 NL80211_PMSR_STATUS_SUCCESS, 7180 NL80211_PMSR_STATUS_REFUSED, 7181 NL80211_PMSR_STATUS_TIMEOUT, 7182 NL80211_PMSR_STATUS_FAILURE, 7183 }; 7184 7185 /** 7186 * enum nl80211_peer_measurement_req - peer measurement request attributes 7187 * @__NL80211_PMSR_REQ_ATTR_INVALID: invalid 7188 * 7189 * @NL80211_PMSR_REQ_ATTR_DATA: This is a nested attribute with measurement 7190 * type-specific request data inside. The attributes used are from the 7191 * enums named nl80211_peer_measurement_<type>_req. 7192 * @NL80211_PMSR_REQ_ATTR_GET_AP_TSF: include AP TSF timestamp, if supported 7193 * (flag attribute) 7194 * 7195 * @NUM_NL80211_PMSR_REQ_ATTRS: internal 7196 * @NL80211_PMSR_REQ_ATTR_MAX: highest attribute number 7197 */ 7198 enum nl80211_peer_measurement_req { 7199 __NL80211_PMSR_REQ_ATTR_INVALID, 7200 7201 NL80211_PMSR_REQ_ATTR_DATA, 7202 NL80211_PMSR_REQ_ATTR_GET_AP_TSF, 7203 7204 /* keep last */ 7205 NUM_NL80211_PMSR_REQ_ATTRS, 7206 NL80211_PMSR_REQ_ATTR_MAX = NUM_NL80211_PMSR_REQ_ATTRS - 1 7207 }; 7208 7209 /** 7210 * enum nl80211_peer_measurement_resp - peer measurement response attributes 7211 * @__NL80211_PMSR_RESP_ATTR_INVALID: invalid 7212 * 7213 * @NL80211_PMSR_RESP_ATTR_DATA: This is a nested attribute with measurement 7214 * type-specific results inside. The attributes used are from the enums 7215 * named nl80211_peer_measurement_<type>_resp. 7216 * @NL80211_PMSR_RESP_ATTR_STATUS: u32 value with the measurement status 7217 * (using values from &enum nl80211_peer_measurement_status.) 7218 * @NL80211_PMSR_RESP_ATTR_HOST_TIME: host time (%CLOCK_BOOTTIME) when the 7219 * result was measured; this value is not expected to be accurate to 7220 * more than 20ms. (u64, nanoseconds) 7221 * @NL80211_PMSR_RESP_ATTR_AP_TSF: TSF of the AP that the interface 7222 * doing the measurement is connected to when the result was measured. 7223 * This shall be accurately reported if supported and requested 7224 * (u64, usec) 7225 * @NL80211_PMSR_RESP_ATTR_FINAL: If results are sent to the host partially 7226 * (*e.g. with FTM per-burst data) this flag will be cleared on all but 7227 * the last result; if all results are combined it's set on the single 7228 * result. 7229 * @NL80211_PMSR_RESP_ATTR_PAD: padding for 64-bit attributes, ignore 7230 * 7231 * @NUM_NL80211_PMSR_RESP_ATTRS: internal 7232 * @NL80211_PMSR_RESP_ATTR_MAX: highest attribute number 7233 */ 7234 enum nl80211_peer_measurement_resp { 7235 __NL80211_PMSR_RESP_ATTR_INVALID, 7236 7237 NL80211_PMSR_RESP_ATTR_DATA, 7238 NL80211_PMSR_RESP_ATTR_STATUS, 7239 NL80211_PMSR_RESP_ATTR_HOST_TIME, 7240 NL80211_PMSR_RESP_ATTR_AP_TSF, 7241 NL80211_PMSR_RESP_ATTR_FINAL, 7242 NL80211_PMSR_RESP_ATTR_PAD, 7243 7244 /* keep last */ 7245 NUM_NL80211_PMSR_RESP_ATTRS, 7246 NL80211_PMSR_RESP_ATTR_MAX = NUM_NL80211_PMSR_RESP_ATTRS - 1 7247 }; 7248 7249 /** 7250 * enum nl80211_peer_measurement_peer_attrs - peer attributes for measurement 7251 * @__NL80211_PMSR_PEER_ATTR_INVALID: invalid 7252 * 7253 * @NL80211_PMSR_PEER_ATTR_ADDR: peer's MAC address 7254 * @NL80211_PMSR_PEER_ATTR_CHAN: channel definition, nested, using top-level 7255 * attributes like %NL80211_ATTR_WIPHY_FREQ etc. 7256 * @NL80211_PMSR_PEER_ATTR_REQ: This is a nested attribute indexed by 7257 * measurement type, with attributes from the 7258 * &enum nl80211_peer_measurement_req inside. 7259 * @NL80211_PMSR_PEER_ATTR_RESP: This is a nested attribute indexed by 7260 * measurement type, with attributes from the 7261 * &enum nl80211_peer_measurement_resp inside. 7262 * 7263 * @NUM_NL80211_PMSR_PEER_ATTRS: internal 7264 * @NL80211_PMSR_PEER_ATTR_MAX: highest attribute number 7265 */ 7266 enum nl80211_peer_measurement_peer_attrs { 7267 __NL80211_PMSR_PEER_ATTR_INVALID, 7268 7269 NL80211_PMSR_PEER_ATTR_ADDR, 7270 NL80211_PMSR_PEER_ATTR_CHAN, 7271 NL80211_PMSR_PEER_ATTR_REQ, 7272 NL80211_PMSR_PEER_ATTR_RESP, 7273 7274 /* keep last */ 7275 NUM_NL80211_PMSR_PEER_ATTRS, 7276 NL80211_PMSR_PEER_ATTR_MAX = NUM_NL80211_PMSR_PEER_ATTRS - 1, 7277 }; 7278 7279 /** 7280 * enum nl80211_peer_measurement_attrs - peer measurement attributes 7281 * @__NL80211_PMSR_ATTR_INVALID: invalid 7282 * 7283 * @NL80211_PMSR_ATTR_MAX_PEERS: u32 attribute used for capability 7284 * advertisement only, indicates the maximum number of peers 7285 * measurements can be done with in a single request 7286 * @NL80211_PMSR_ATTR_REPORT_AP_TSF: flag attribute in capability 7287 * indicating that the connected AP's TSF can be reported in 7288 * measurement results 7289 * @NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR: flag attribute in capability 7290 * indicating that MAC address randomization is supported. 7291 * @NL80211_PMSR_ATTR_TYPE_CAPA: capabilities reported by the device, 7292 * this contains a nesting indexed by measurement type, and 7293 * type-specific capabilities inside, which are from the enums 7294 * named nl80211_peer_measurement_<type>_capa. 7295 * @NL80211_PMSR_ATTR_PEERS: nested attribute, the nesting index is 7296 * meaningless, just a list of peers to measure with, with the 7297 * sub-attributes taken from 7298 * &enum nl80211_peer_measurement_peer_attrs. 7299 * 7300 * @NUM_NL80211_PMSR_ATTR: internal 7301 * @NL80211_PMSR_ATTR_MAX: highest attribute number 7302 */ 7303 enum nl80211_peer_measurement_attrs { 7304 __NL80211_PMSR_ATTR_INVALID, 7305 7306 NL80211_PMSR_ATTR_MAX_PEERS, 7307 NL80211_PMSR_ATTR_REPORT_AP_TSF, 7308 NL80211_PMSR_ATTR_RANDOMIZE_MAC_ADDR, 7309 NL80211_PMSR_ATTR_TYPE_CAPA, 7310 NL80211_PMSR_ATTR_PEERS, 7311 7312 /* keep last */ 7313 NUM_NL80211_PMSR_ATTR, 7314 NL80211_PMSR_ATTR_MAX = NUM_NL80211_PMSR_ATTR - 1 7315 }; 7316 7317 /** 7318 * enum nl80211_peer_measurement_ftm_capa - FTM capabilities 7319 * @__NL80211_PMSR_FTM_CAPA_ATTR_INVALID: invalid 7320 * 7321 * @NL80211_PMSR_FTM_CAPA_ATTR_ASAP: flag attribute indicating ASAP mode 7322 * is supported 7323 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP: flag attribute indicating non-ASAP 7324 * mode is supported 7325 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI: flag attribute indicating if LCI 7326 * data can be requested during the measurement 7327 * @NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC: flag attribute indicating if civic 7328 * location data can be requested during the measurement 7329 * @NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES: u32 bitmap attribute of bits 7330 * from &enum nl80211_preamble. 7331 * @NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS: bitmap of values from 7332 * &enum nl80211_chan_width indicating the supported channel 7333 * bandwidths for FTM. Note that a higher channel bandwidth may be 7334 * configured to allow for other measurements types with different 7335 * bandwidth requirement in the same measurement. 7336 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT: u32 attribute indicating 7337 * the maximum bursts exponent that can be used (if not present anything 7338 * is valid) 7339 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST: u32 attribute indicating 7340 * the maximum FTMs per burst (if not present anything is valid) 7341 * @NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED: flag attribute indicating if 7342 * trigger based ranging measurement is supported 7343 * @NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED: flag attribute indicating 7344 * if non trigger based ranging measurement is supported 7345 * 7346 * @NUM_NL80211_PMSR_FTM_CAPA_ATTR: internal 7347 * @NL80211_PMSR_FTM_CAPA_ATTR_MAX: highest attribute number 7348 */ 7349 enum nl80211_peer_measurement_ftm_capa { 7350 __NL80211_PMSR_FTM_CAPA_ATTR_INVALID, 7351 7352 NL80211_PMSR_FTM_CAPA_ATTR_ASAP, 7353 NL80211_PMSR_FTM_CAPA_ATTR_NON_ASAP, 7354 NL80211_PMSR_FTM_CAPA_ATTR_REQ_LCI, 7355 NL80211_PMSR_FTM_CAPA_ATTR_REQ_CIVICLOC, 7356 NL80211_PMSR_FTM_CAPA_ATTR_PREAMBLES, 7357 NL80211_PMSR_FTM_CAPA_ATTR_BANDWIDTHS, 7358 NL80211_PMSR_FTM_CAPA_ATTR_MAX_BURSTS_EXPONENT, 7359 NL80211_PMSR_FTM_CAPA_ATTR_MAX_FTMS_PER_BURST, 7360 NL80211_PMSR_FTM_CAPA_ATTR_TRIGGER_BASED, 7361 NL80211_PMSR_FTM_CAPA_ATTR_NON_TRIGGER_BASED, 7362 7363 /* keep last */ 7364 NUM_NL80211_PMSR_FTM_CAPA_ATTR, 7365 NL80211_PMSR_FTM_CAPA_ATTR_MAX = NUM_NL80211_PMSR_FTM_CAPA_ATTR - 1 7366 }; 7367 7368 /** 7369 * enum nl80211_peer_measurement_ftm_req - FTM request attributes 7370 * @__NL80211_PMSR_FTM_REQ_ATTR_INVALID: invalid 7371 * 7372 * @NL80211_PMSR_FTM_REQ_ATTR_ASAP: ASAP mode requested (flag) 7373 * @NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE: preamble type (see 7374 * &enum nl80211_preamble), optional for DMG (u32) 7375 * @NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP: number of bursts exponent as in 7376 * 802.11-2016 9.4.2.168 "Fine Timing Measurement Parameters element" 7377 * (u8, 0-15, optional with default 15 i.e. "no preference") 7378 * @NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD: interval between bursts in units 7379 * of 100ms (u16, optional with default 0) 7380 * @NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION: burst duration, as in 802.11-2016 7381 * Table 9-257 "Burst Duration field encoding" (u8, 0-15, optional with 7382 * default 15 i.e. "no preference") 7383 * @NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST: number of successful FTM frames 7384 * requested per burst 7385 * (u8, 0-31, optional with default 0 i.e. "no preference") 7386 * @NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES: number of FTMR frame retries 7387 * (u8, default 3) 7388 * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI: request LCI data (flag) 7389 * @NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC: request civic location data 7390 * (flag) 7391 * @NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED: request trigger based ranging 7392 * measurement (flag). 7393 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED are 7394 * mutually exclusive. 7395 * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor 7396 * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based 7397 * ranging will be used. 7398 * @NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED: request non trigger based 7399 * ranging measurement (flag) 7400 * This attribute and %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED are 7401 * mutually exclusive. 7402 * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor 7403 * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based 7404 * ranging will be used. 7405 * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only 7406 * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or 7407 * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. 7408 * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the 7409 * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED 7410 * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. 7411 * 7412 * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal 7413 * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number 7414 */ 7415 enum nl80211_peer_measurement_ftm_req { 7416 __NL80211_PMSR_FTM_REQ_ATTR_INVALID, 7417 7418 NL80211_PMSR_FTM_REQ_ATTR_ASAP, 7419 NL80211_PMSR_FTM_REQ_ATTR_PREAMBLE, 7420 NL80211_PMSR_FTM_REQ_ATTR_NUM_BURSTS_EXP, 7421 NL80211_PMSR_FTM_REQ_ATTR_BURST_PERIOD, 7422 NL80211_PMSR_FTM_REQ_ATTR_BURST_DURATION, 7423 NL80211_PMSR_FTM_REQ_ATTR_FTMS_PER_BURST, 7424 NL80211_PMSR_FTM_REQ_ATTR_NUM_FTMR_RETRIES, 7425 NL80211_PMSR_FTM_REQ_ATTR_REQUEST_LCI, 7426 NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, 7427 NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, 7428 NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, 7429 NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, 7430 NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, 7431 7432 /* keep last */ 7433 NUM_NL80211_PMSR_FTM_REQ_ATTR, 7434 NL80211_PMSR_FTM_REQ_ATTR_MAX = NUM_NL80211_PMSR_FTM_REQ_ATTR - 1 7435 }; 7436 7437 /** 7438 * enum nl80211_peer_measurement_ftm_failure_reasons - FTM failure reasons 7439 * @NL80211_PMSR_FTM_FAILURE_UNSPECIFIED: unspecified failure, not used 7440 * @NL80211_PMSR_FTM_FAILURE_NO_RESPONSE: no response from the FTM responder 7441 * @NL80211_PMSR_FTM_FAILURE_REJECTED: FTM responder rejected measurement 7442 * @NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL: we already know the peer is 7443 * on a different channel, so can't measure (if we didn't know, we'd 7444 * try and get no response) 7445 * @NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE: peer can't actually do FTM 7446 * @NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP: invalid T1/T4 timestamps 7447 * received 7448 * @NL80211_PMSR_FTM_FAILURE_PEER_BUSY: peer reports busy, you may retry 7449 * later (see %NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME) 7450 * @NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS: parameters were changed 7451 * by the peer and are no longer supported 7452 */ 7453 enum nl80211_peer_measurement_ftm_failure_reasons { 7454 NL80211_PMSR_FTM_FAILURE_UNSPECIFIED, 7455 NL80211_PMSR_FTM_FAILURE_NO_RESPONSE, 7456 NL80211_PMSR_FTM_FAILURE_REJECTED, 7457 NL80211_PMSR_FTM_FAILURE_WRONG_CHANNEL, 7458 NL80211_PMSR_FTM_FAILURE_PEER_NOT_CAPABLE, 7459 NL80211_PMSR_FTM_FAILURE_INVALID_TIMESTAMP, 7460 NL80211_PMSR_FTM_FAILURE_PEER_BUSY, 7461 NL80211_PMSR_FTM_FAILURE_BAD_CHANGED_PARAMS, 7462 }; 7463 7464 /** 7465 * enum nl80211_peer_measurement_ftm_resp - FTM response attributes 7466 * @__NL80211_PMSR_FTM_RESP_ATTR_INVALID: invalid 7467 * 7468 * @NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON: FTM-specific failure reason 7469 * (u32, optional) 7470 * @NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX: optional, if bursts are reported 7471 * as separate results then it will be the burst index 0...(N-1) and 7472 * the top level will indicate partial results (u32) 7473 * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS: number of FTM Request frames 7474 * transmitted (u32, optional) 7475 * @NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES: number of FTM Request frames 7476 * that were acknowleged (u32, optional) 7477 * @NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME: retry time received from the 7478 * busy peer (u32, seconds) 7479 * @NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP: actual number of bursts exponent 7480 * used by the responder (similar to request, u8) 7481 * @NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION: actual burst duration used by 7482 * the responder (similar to request, u8) 7483 * @NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST: actual FTMs per burst used 7484 * by the responder (similar to request, u8) 7485 * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG: average RSSI across all FTM action 7486 * frames (optional, s32, 1/2 dBm) 7487 * @NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD: RSSI spread across all FTM action 7488 * frames (optional, s32, 1/2 dBm) 7489 * @NL80211_PMSR_FTM_RESP_ATTR_TX_RATE: bitrate we used for the response to the 7490 * FTM action frame (optional, nested, using &enum nl80211_rate_info 7491 * attributes) 7492 * @NL80211_PMSR_FTM_RESP_ATTR_RX_RATE: bitrate the responder used for the FTM 7493 * action frame (optional, nested, using &enum nl80211_rate_info attrs) 7494 * @NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG: average RTT (s64, picoseconds, optional 7495 * but one of RTT/DIST must be present) 7496 * @NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE: RTT variance (u64, ps^2, note that 7497 * standard deviation is the square root of variance, optional) 7498 * @NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD: RTT spread (u64, picoseconds, 7499 * optional) 7500 * @NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG: average distance (s64, mm, optional 7501 * but one of RTT/DIST must be present) 7502 * @NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE: distance variance (u64, mm^2, note 7503 * that standard deviation is the square root of variance, optional) 7504 * @NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD: distance spread (u64, mm, optional) 7505 * @NL80211_PMSR_FTM_RESP_ATTR_LCI: LCI data from peer (binary, optional); 7506 * this is the contents of the Measurement Report Element (802.11-2016 7507 * 9.4.2.22.1) starting with the Measurement Token, with Measurement 7508 * Type 8. 7509 * @NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC: civic location data from peer 7510 * (binary, optional); 7511 * this is the contents of the Measurement Report Element (802.11-2016 7512 * 9.4.2.22.1) starting with the Measurement Token, with Measurement 7513 * Type 11. 7514 * @NL80211_PMSR_FTM_RESP_ATTR_PAD: ignore, for u64/s64 padding only 7515 * 7516 * @NUM_NL80211_PMSR_FTM_RESP_ATTR: internal 7517 * @NL80211_PMSR_FTM_RESP_ATTR_MAX: highest attribute number 7518 */ 7519 enum nl80211_peer_measurement_ftm_resp { 7520 __NL80211_PMSR_FTM_RESP_ATTR_INVALID, 7521 7522 NL80211_PMSR_FTM_RESP_ATTR_FAIL_REASON, 7523 NL80211_PMSR_FTM_RESP_ATTR_BURST_INDEX, 7524 NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_ATTEMPTS, 7525 NL80211_PMSR_FTM_RESP_ATTR_NUM_FTMR_SUCCESSES, 7526 NL80211_PMSR_FTM_RESP_ATTR_BUSY_RETRY_TIME, 7527 NL80211_PMSR_FTM_RESP_ATTR_NUM_BURSTS_EXP, 7528 NL80211_PMSR_FTM_RESP_ATTR_BURST_DURATION, 7529 NL80211_PMSR_FTM_RESP_ATTR_FTMS_PER_BURST, 7530 NL80211_PMSR_FTM_RESP_ATTR_RSSI_AVG, 7531 NL80211_PMSR_FTM_RESP_ATTR_RSSI_SPREAD, 7532 NL80211_PMSR_FTM_RESP_ATTR_TX_RATE, 7533 NL80211_PMSR_FTM_RESP_ATTR_RX_RATE, 7534 NL80211_PMSR_FTM_RESP_ATTR_RTT_AVG, 7535 NL80211_PMSR_FTM_RESP_ATTR_RTT_VARIANCE, 7536 NL80211_PMSR_FTM_RESP_ATTR_RTT_SPREAD, 7537 NL80211_PMSR_FTM_RESP_ATTR_DIST_AVG, 7538 NL80211_PMSR_FTM_RESP_ATTR_DIST_VARIANCE, 7539 NL80211_PMSR_FTM_RESP_ATTR_DIST_SPREAD, 7540 NL80211_PMSR_FTM_RESP_ATTR_LCI, 7541 NL80211_PMSR_FTM_RESP_ATTR_CIVICLOC, 7542 NL80211_PMSR_FTM_RESP_ATTR_PAD, 7543 7544 /* keep last */ 7545 NUM_NL80211_PMSR_FTM_RESP_ATTR, 7546 NL80211_PMSR_FTM_RESP_ATTR_MAX = NUM_NL80211_PMSR_FTM_RESP_ATTR - 1 7547 }; 7548 7549 /** 7550 * enum nl80211_obss_pd_attributes - OBSS packet detection attributes 7551 * @__NL80211_HE_OBSS_PD_ATTR_INVALID: Invalid 7552 * 7553 * @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset. 7554 * @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset. 7555 * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum 7556 * tx power offset. 7557 * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color 7558 * values used by members of the SRG. 7559 * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial 7560 * BSSID values used by members of the SRG. 7561 * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element. 7562 * 7563 * @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal 7564 * @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute. 7565 */ 7566 enum nl80211_obss_pd_attributes { 7567 __NL80211_HE_OBSS_PD_ATTR_INVALID, 7568 7569 NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET, 7570 NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET, 7571 NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET, 7572 NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP, 7573 NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP, 7574 NL80211_HE_OBSS_PD_ATTR_SR_CTRL, 7575 7576 /* keep last */ 7577 __NL80211_HE_OBSS_PD_ATTR_LAST, 7578 NL80211_HE_OBSS_PD_ATTR_MAX = __NL80211_HE_OBSS_PD_ATTR_LAST - 1, 7579 }; 7580 7581 /** 7582 * enum nl80211_bss_color_attributes - BSS Color attributes 7583 * @__NL80211_HE_BSS_COLOR_ATTR_INVALID: Invalid 7584 * 7585 * @NL80211_HE_BSS_COLOR_ATTR_COLOR: the current BSS Color. 7586 * @NL80211_HE_BSS_COLOR_ATTR_DISABLED: is BSS coloring disabled. 7587 * @NL80211_HE_BSS_COLOR_ATTR_PARTIAL: the AID equation to be used.. 7588 * 7589 * @__NL80211_HE_BSS_COLOR_ATTR_LAST: Internal 7590 * @NL80211_HE_BSS_COLOR_ATTR_MAX: highest BSS Color attribute. 7591 */ 7592 enum nl80211_bss_color_attributes { 7593 __NL80211_HE_BSS_COLOR_ATTR_INVALID, 7594 7595 NL80211_HE_BSS_COLOR_ATTR_COLOR, 7596 NL80211_HE_BSS_COLOR_ATTR_DISABLED, 7597 NL80211_HE_BSS_COLOR_ATTR_PARTIAL, 7598 7599 /* keep last */ 7600 __NL80211_HE_BSS_COLOR_ATTR_LAST, 7601 NL80211_HE_BSS_COLOR_ATTR_MAX = __NL80211_HE_BSS_COLOR_ATTR_LAST - 1, 7602 }; 7603 7604 /** 7605 * enum nl80211_iftype_akm_attributes - interface type AKM attributes 7606 * @__NL80211_IFTYPE_AKM_ATTR_INVALID: Invalid 7607 * 7608 * @NL80211_IFTYPE_AKM_ATTR_IFTYPES: nested attribute containing a flag 7609 * attribute for each interface type that supports AKM suites specified in 7610 * %NL80211_IFTYPE_AKM_ATTR_SUITES 7611 * @NL80211_IFTYPE_AKM_ATTR_SUITES: an array of u32. Used to indicate supported 7612 * AKM suites for the specified interface types. 7613 * 7614 * @__NL80211_IFTYPE_AKM_ATTR_LAST: Internal 7615 * @NL80211_IFTYPE_AKM_ATTR_MAX: highest interface type AKM attribute. 7616 */ 7617 enum nl80211_iftype_akm_attributes { 7618 __NL80211_IFTYPE_AKM_ATTR_INVALID, 7619 7620 NL80211_IFTYPE_AKM_ATTR_IFTYPES, 7621 NL80211_IFTYPE_AKM_ATTR_SUITES, 7622 7623 /* keep last */ 7624 __NL80211_IFTYPE_AKM_ATTR_LAST, 7625 NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1, 7626 }; 7627 7628 /** 7629 * enum nl80211_fils_discovery_attributes - FILS discovery configuration 7630 * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail. 7631 * 7632 * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid 7633 * 7634 * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU). 7635 * Allowed range: 0..10000 (TU = Time Unit) 7636 * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU). 7637 * Allowed range: 0..10000 (TU = Time Unit). If set to 0, the feature is disabled. 7638 * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action 7639 * frame including the headers. 7640 * 7641 * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal 7642 * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute 7643 */ 7644 enum nl80211_fils_discovery_attributes { 7645 __NL80211_FILS_DISCOVERY_ATTR_INVALID, 7646 7647 NL80211_FILS_DISCOVERY_ATTR_INT_MIN, 7648 NL80211_FILS_DISCOVERY_ATTR_INT_MAX, 7649 NL80211_FILS_DISCOVERY_ATTR_TMPL, 7650 7651 /* keep last */ 7652 __NL80211_FILS_DISCOVERY_ATTR_LAST, 7653 NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1 7654 }; 7655 7656 /* 7657 * FILS discovery template minimum length with action frame headers and 7658 * mandatory fields. 7659 */ 7660 #define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42 7661 7662 /** 7663 * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe 7664 * response configuration. Applicable only in 6GHz. 7665 * 7666 * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid 7667 * 7668 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU). 7669 * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0 7670 * 26.17.2.3.2 (AP behavior for fast passive scanning). If set to 0, the feature is 7671 * disabled. 7672 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response 7673 * frame template (binary). 7674 * 7675 * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal 7676 * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute 7677 */ 7678 enum nl80211_unsol_bcast_probe_resp_attributes { 7679 __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID, 7680 7681 NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT, 7682 NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL, 7683 7684 /* keep last */ 7685 __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST, 7686 NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX = 7687 __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1 7688 }; 7689 7690 /** 7691 * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE 7692 * derivation. Applicable only when WPA3-Personal SAE authentication is 7693 * used. 7694 * 7695 * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that 7696 * attribute is not present from userspace. 7697 * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only 7698 * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only 7699 * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element 7700 * can be used. 7701 */ 7702 enum nl80211_sae_pwe_mechanism { 7703 NL80211_SAE_PWE_UNSPECIFIED, 7704 NL80211_SAE_PWE_HUNT_AND_PECK, 7705 NL80211_SAE_PWE_HASH_TO_ELEMENT, 7706 NL80211_SAE_PWE_BOTH, 7707 }; 7708 7709 /** 7710 * enum nl80211_sar_type - type of SAR specs 7711 * 7712 * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit 7713 * 7714 */ 7715 enum nl80211_sar_type { 7716 NL80211_SAR_TYPE_POWER, 7717 7718 /* add new type here */ 7719 7720 /* Keep last */ 7721 NUM_NL80211_SAR_TYPE, 7722 }; 7723 7724 /** 7725 * enum nl80211_sar_attrs - Attributes for SAR spec 7726 * 7727 * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. 7728 * 7729 * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power 7730 * limit specifications. Each specification contains a set 7731 * of %nl80211_sar_specs_attrs. 7732 * 7733 * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER 7734 * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX. 7735 * 7736 * For sar_capa dump, it contains array of 7737 * %NL80211_SAR_ATTR_SPECS_START_FREQ 7738 * and %NL80211_SAR_ATTR_SPECS_END_FREQ. 7739 * 7740 * @__NL80211_SAR_ATTR_LAST: Internal 7741 * @NL80211_SAR_ATTR_MAX: highest sar attribute 7742 * 7743 * These attributes are used with %NL80211_CMD_SET_SAR_SPEC 7744 */ 7745 enum nl80211_sar_attrs { 7746 __NL80211_SAR_ATTR_INVALID, 7747 7748 NL80211_SAR_ATTR_TYPE, 7749 NL80211_SAR_ATTR_SPECS, 7750 7751 __NL80211_SAR_ATTR_LAST, 7752 NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1, 7753 }; 7754 7755 /** 7756 * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs 7757 * 7758 * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual 7759 * power limit value in units of 0.25 dBm if type is 7760 * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). 7761 * 0 means userspace doesn't have SAR limitation on this associated range. 7762 * 7763 * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the 7764 * index of exported freq range table and the associated power limitation 7765 * is applied to this range. 7766 * 7767 * Userspace isn't required to set all the ranges advertised by WLAN driver, 7768 * and userspace can skip some certain ranges. These skipped ranges don't 7769 * have SAR limitations, and they are same as setting the 7770 * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any 7771 * value higher than regulatory allowed value just means SAR power 7772 * limitation is removed, but it's required to set at least one range. 7773 * It's not allowed to set duplicated range in one SET operation. 7774 * 7775 * Every SET operation overwrites previous SET operation. 7776 * 7777 * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start 7778 * frequency of this range edge when registering SAR capability to wiphy. 7779 * It's not a channel center frequency. The unit is kHz. 7780 * 7781 * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end 7782 * frequency of this range edge when registering SAR capability to wiphy. 7783 * It's not a channel center frequency. The unit is kHz. 7784 * 7785 * @__NL80211_SAR_ATTR_SPECS_LAST: Internal 7786 * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute 7787 */ 7788 enum nl80211_sar_specs_attrs { 7789 __NL80211_SAR_ATTR_SPECS_INVALID, 7790 7791 NL80211_SAR_ATTR_SPECS_POWER, 7792 NL80211_SAR_ATTR_SPECS_RANGE_INDEX, 7793 NL80211_SAR_ATTR_SPECS_START_FREQ, 7794 NL80211_SAR_ATTR_SPECS_END_FREQ, 7795 7796 __NL80211_SAR_ATTR_SPECS_LAST, 7797 NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, 7798 }; 7799 7800 /** 7801 * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced 7802 * multi-BSSID advertisements (EMA) in AP mode. 7803 * Kernel uses some of these attributes to advertise driver's support for 7804 * MBSSID and EMA. 7805 * Remaining attributes should be used by the userspace to configure the 7806 * features. 7807 * 7808 * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid 7809 * 7810 * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise 7811 * the maximum number of MBSSID interfaces supported by the driver. 7812 * Driver should indicate MBSSID support by setting 7813 * wiphy->mbssid_max_interfaces to a value more than or equal to 2. 7814 * 7815 * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel 7816 * to advertise the maximum profile periodicity supported by the driver 7817 * if EMA is enabled. Driver should indicate EMA support to the userspace 7818 * by setting wiphy->ema_max_profile_periodicity to 7819 * a non-zero value. 7820 * 7821 * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of 7822 * this BSS (u8) in the multiple BSSID set. 7823 * Value must be set to 0 for the transmitting interface and non-zero for 7824 * all non-transmitting interfaces. The userspace will be responsible 7825 * for using unique indices for the interfaces. 7826 * Range: 0 to wiphy->mbssid_max_interfaces-1. 7827 * 7828 * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for 7829 * a non-transmitted profile which provides the interface index (u32) of 7830 * the transmitted profile. The value must match one of the interface 7831 * indices advertised by the kernel. Optional if the interface being set up 7832 * is the transmitting one, however, if provided then the value must match 7833 * the interface index of the same. 7834 * 7835 * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature. 7836 * Setting this flag is permitted only if the driver advertises EMA support 7837 * by setting wiphy->ema_max_profile_periodicity to non-zero. 7838 * 7839 * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal 7840 * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute 7841 */ 7842 enum nl80211_mbssid_config_attributes { 7843 __NL80211_MBSSID_CONFIG_ATTR_INVALID, 7844 7845 NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES, 7846 NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY, 7847 NL80211_MBSSID_CONFIG_ATTR_INDEX, 7848 NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, 7849 NL80211_MBSSID_CONFIG_ATTR_EMA, 7850 7851 /* keep last */ 7852 __NL80211_MBSSID_CONFIG_ATTR_LAST, 7853 NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1, 7854 }; 7855 7856 /** 7857 * enum nl80211_ap_settings_flags - AP settings flags 7858 * 7859 * @NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT: AP supports external 7860 * authentication. 7861 * @NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT: Userspace supports SA Query 7862 * procedures offload to driver. If driver advertises 7863 * %NL80211_AP_SME_SA_QUERY_OFFLOAD in AP SME features, userspace shall 7864 * ignore SA Query procedures and validations when this flag is set by 7865 * userspace. 7866 */ 7867 enum nl80211_ap_settings_flags { 7868 NL80211_AP_SETTINGS_EXTERNAL_AUTH_SUPPORT = 1 << 0, 7869 NL80211_AP_SETTINGS_SA_QUERY_OFFLOAD_SUPPORT = 1 << 1, 7870 }; 7871 7872 #endif /* __LINUX_NL80211_H */ 7873