xref: /freebsd/contrib/wpa/src/crypto/random.c (revision ca2e4ecd7395ba655ab4bebe7262a06e634216ce)
1 /*
2  * Random number generator
3  * Copyright (c) 2010-2011, Jouni Malinen <j@w1.fi>
4  *
5  * This software may be distributed under the terms of the BSD license.
6  * See README for more details.
7  *
8  * This random number generator is used to provide additional entropy to the
9  * one provided by the operating system (os_get_random()) for session key
10  * generation. The os_get_random() output is expected to be secure and the
11  * implementation here is expected to provide only limited protection against
12  * cases where os_get_random() cannot provide strong randomness. This
13  * implementation shall not be assumed to be secure as the sole source of
14  * randomness. The random_get_bytes() function mixes in randomness from
15  * os_get_random() and as such, calls to os_get_random() can be replaced with
16  * calls to random_get_bytes() without reducing security.
17  *
18  * The design here follows partially the design used in the Linux
19  * drivers/char/random.c, but the implementation here is simpler and not as
20  * strong. This is a compromise to reduce duplicated CPU effort and to avoid
21  * extra code/memory size. As pointed out above, os_get_random() needs to be
22  * guaranteed to be secure for any of the security assumptions to hold.
23  */
24 
25 #include "utils/includes.h"
26 #ifdef __linux__
27 #include <fcntl.h>
28 #endif /* __linux__ */
29 
30 #include "utils/common.h"
31 #include "utils/eloop.h"
32 #include "crypto/crypto.h"
33 #include "sha1.h"
34 #include "random.h"
35 
36 #define POOL_WORDS 32
37 #define POOL_WORDS_MASK (POOL_WORDS - 1)
38 #define POOL_TAP1 26
39 #define POOL_TAP2 20
40 #define POOL_TAP3 14
41 #define POOL_TAP4 7
42 #define POOL_TAP5 1
43 #define EXTRACT_LEN 16
44 #define MIN_READY_MARK 2
45 
46 static u32 pool[POOL_WORDS];
47 static unsigned int input_rotate = 0;
48 static unsigned int pool_pos = 0;
49 static u8 dummy_key[20];
50 #ifdef __linux__
51 static size_t dummy_key_avail = 0;
52 static int random_fd = -1;
53 #endif /* __linux__ */
54 static unsigned int own_pool_ready = 0;
55 #define RANDOM_ENTROPY_SIZE 20
56 static char *random_entropy_file = NULL;
57 static int random_entropy_file_read = 0;
58 
59 #define MIN_COLLECT_ENTROPY 1000
60 static unsigned int entropy = 0;
61 static unsigned int total_collected = 0;
62 
63 
64 static void random_write_entropy(void);
65 
66 
67 static u32 __ROL32(u32 x, u32 y)
68 {
69 	return (x << (y & 31)) | (x >> (32 - (y & 31)));
70 }
71 
72 
73 static void random_mix_pool(const void *buf, size_t len)
74 {
75 	static const u32 twist[8] = {
76 		0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158,
77 		0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278
78 	};
79 	const u8 *pos = buf;
80 	u32 w;
81 
82 	wpa_hexdump_key(MSG_EXCESSIVE, "random_mix_pool", buf, len);
83 
84 	while (len--) {
85 		w = __ROL32(*pos++, input_rotate & 31);
86 		input_rotate += pool_pos ? 7 : 14;
87 		pool_pos = (pool_pos - 1) & POOL_WORDS_MASK;
88 		w ^= pool[pool_pos];
89 		w ^= pool[(pool_pos + POOL_TAP1) & POOL_WORDS_MASK];
90 		w ^= pool[(pool_pos + POOL_TAP2) & POOL_WORDS_MASK];
91 		w ^= pool[(pool_pos + POOL_TAP3) & POOL_WORDS_MASK];
92 		w ^= pool[(pool_pos + POOL_TAP4) & POOL_WORDS_MASK];
93 		w ^= pool[(pool_pos + POOL_TAP5) & POOL_WORDS_MASK];
94 		pool[pool_pos] = (w >> 3) ^ twist[w & 7];
95 	}
96 }
97 
98 
99 static void random_extract(u8 *out)
100 {
101 	unsigned int i;
102 	u8 hash[SHA1_MAC_LEN];
103 	u32 *hash_ptr;
104 	u32 buf[POOL_WORDS / 2];
105 
106 	/* First, add hash back to pool to make backtracking more difficult. */
107 	hmac_sha1(dummy_key, sizeof(dummy_key), (const u8 *) pool,
108 		  sizeof(pool), hash);
109 	random_mix_pool(hash, sizeof(hash));
110 	/* Hash half the pool to extra data */
111 	for (i = 0; i < POOL_WORDS / 2; i++)
112 		buf[i] = pool[(pool_pos - i) & POOL_WORDS_MASK];
113 	hmac_sha1(dummy_key, sizeof(dummy_key), (const u8 *) buf,
114 		  sizeof(buf), hash);
115 	/*
116 	 * Fold the hash to further reduce any potential output pattern.
117 	 * Though, compromise this to reduce CPU use for the most common output
118 	 * length (32) and return 16 bytes from instead of only half.
119 	 */
120 	hash_ptr = (u32 *) hash;
121 	hash_ptr[0] ^= hash_ptr[4];
122 	os_memcpy(out, hash, EXTRACT_LEN);
123 }
124 
125 
126 void random_add_randomness(const void *buf, size_t len)
127 {
128 	struct os_time t;
129 	static unsigned int count = 0;
130 
131 	count++;
132 	if (entropy > MIN_COLLECT_ENTROPY && (count & 0x3ff) != 0) {
133 		/*
134 		 * No need to add more entropy at this point, so save CPU and
135 		 * skip the update.
136 		 */
137 		return;
138 	}
139 	wpa_printf(MSG_EXCESSIVE, "Add randomness: count=%u entropy=%u",
140 		   count, entropy);
141 
142 	os_get_time(&t);
143 	wpa_hexdump_key(MSG_EXCESSIVE, "random pool",
144 			(const u8 *) pool, sizeof(pool));
145 	random_mix_pool(&t, sizeof(t));
146 	random_mix_pool(buf, len);
147 	wpa_hexdump_key(MSG_EXCESSIVE, "random pool",
148 			(const u8 *) pool, sizeof(pool));
149 	entropy++;
150 	total_collected++;
151 }
152 
153 
154 int random_get_bytes(void *buf, size_t len)
155 {
156 	int ret;
157 	u8 *bytes = buf;
158 	size_t left;
159 
160 	wpa_printf(MSG_MSGDUMP, "Get randomness: len=%u entropy=%u",
161 		   (unsigned int) len, entropy);
162 
163 	/* Start with assumed strong randomness from OS */
164 	ret = os_get_random(buf, len);
165 	wpa_hexdump_key(MSG_EXCESSIVE, "random from os_get_random",
166 			buf, len);
167 
168 	/* Mix in additional entropy extracted from the internal pool */
169 	left = len;
170 	while (left) {
171 		size_t siz, i;
172 		u8 tmp[EXTRACT_LEN];
173 		random_extract(tmp);
174 		wpa_hexdump_key(MSG_EXCESSIVE, "random from internal pool",
175 				tmp, sizeof(tmp));
176 		siz = left > EXTRACT_LEN ? EXTRACT_LEN : left;
177 		for (i = 0; i < siz; i++)
178 			*bytes++ ^= tmp[i];
179 		left -= siz;
180 	}
181 
182 #ifdef CONFIG_FIPS
183 	/* Mix in additional entropy from the crypto module */
184 	left = len;
185 	while (left) {
186 		size_t siz, i;
187 		u8 tmp[EXTRACT_LEN];
188 		if (crypto_get_random(tmp, sizeof(tmp)) < 0) {
189 			wpa_printf(MSG_ERROR, "random: No entropy available "
190 				   "for generating strong random bytes");
191 			return -1;
192 		}
193 		wpa_hexdump_key(MSG_EXCESSIVE, "random from crypto module",
194 				tmp, sizeof(tmp));
195 		siz = left > EXTRACT_LEN ? EXTRACT_LEN : left;
196 		for (i = 0; i < siz; i++)
197 			*bytes++ ^= tmp[i];
198 		left -= siz;
199 	}
200 #endif /* CONFIG_FIPS */
201 
202 	wpa_hexdump_key(MSG_EXCESSIVE, "mixed random", buf, len);
203 
204 	if (entropy < len)
205 		entropy = 0;
206 	else
207 		entropy -= len;
208 
209 	return ret;
210 }
211 
212 
213 int random_pool_ready(void)
214 {
215 #ifdef __linux__
216 	int fd;
217 	ssize_t res;
218 
219 	/*
220 	 * Make sure that there is reasonable entropy available before allowing
221 	 * some key derivation operations to proceed.
222 	 */
223 
224 	if (dummy_key_avail == sizeof(dummy_key))
225 		return 1; /* Already initialized - good to continue */
226 
227 	/*
228 	 * Try to fetch some more data from the kernel high quality
229 	 * /dev/random. There may not be enough data available at this point,
230 	 * so use non-blocking read to avoid blocking the application
231 	 * completely.
232 	 */
233 	fd = open("/dev/random", O_RDONLY | O_NONBLOCK);
234 	if (fd < 0) {
235 		wpa_printf(MSG_ERROR, "random: Cannot open /dev/random: %s",
236 			   strerror(errno));
237 		return -1;
238 	}
239 
240 	res = read(fd, dummy_key + dummy_key_avail,
241 		   sizeof(dummy_key) - dummy_key_avail);
242 	if (res < 0) {
243 		wpa_printf(MSG_ERROR, "random: Cannot read from /dev/random: "
244 			   "%s", strerror(errno));
245 		res = 0;
246 	}
247 	wpa_printf(MSG_DEBUG, "random: Got %u/%u bytes from "
248 		   "/dev/random", (unsigned) res,
249 		   (unsigned) (sizeof(dummy_key) - dummy_key_avail));
250 	dummy_key_avail += res;
251 	close(fd);
252 
253 	if (dummy_key_avail == sizeof(dummy_key)) {
254 		if (own_pool_ready < MIN_READY_MARK)
255 			own_pool_ready = MIN_READY_MARK;
256 		random_write_entropy();
257 		return 1;
258 	}
259 
260 	wpa_printf(MSG_INFO, "random: Only %u/%u bytes of strong "
261 		   "random data available from /dev/random",
262 		   (unsigned) dummy_key_avail, (unsigned) sizeof(dummy_key));
263 
264 	if (own_pool_ready >= MIN_READY_MARK ||
265 	    total_collected + 10 * own_pool_ready > MIN_COLLECT_ENTROPY) {
266 		wpa_printf(MSG_INFO, "random: Allow operation to proceed "
267 			   "based on internal entropy");
268 		return 1;
269 	}
270 
271 	wpa_printf(MSG_INFO, "random: Not enough entropy pool available for "
272 		   "secure operations");
273 	return 0;
274 #else /* __linux__ */
275 	/* TODO: could do similar checks on non-Linux platforms */
276 	return 1;
277 #endif /* __linux__ */
278 }
279 
280 
281 void random_mark_pool_ready(void)
282 {
283 	own_pool_ready++;
284 	wpa_printf(MSG_DEBUG, "random: Mark internal entropy pool to be "
285 		   "ready (count=%u/%u)", own_pool_ready, MIN_READY_MARK);
286 	random_write_entropy();
287 }
288 
289 
290 #ifdef __linux__
291 
292 static void random_close_fd(void)
293 {
294 	if (random_fd >= 0) {
295 		eloop_unregister_read_sock(random_fd);
296 		close(random_fd);
297 		random_fd = -1;
298 	}
299 }
300 
301 
302 static void random_read_fd(int sock, void *eloop_ctx, void *sock_ctx)
303 {
304 	ssize_t res;
305 
306 	if (dummy_key_avail == sizeof(dummy_key)) {
307 		random_close_fd();
308 		return;
309 	}
310 
311 	res = read(sock, dummy_key + dummy_key_avail,
312 		   sizeof(dummy_key) - dummy_key_avail);
313 	if (res < 0) {
314 		wpa_printf(MSG_ERROR, "random: Cannot read from /dev/random: "
315 			   "%s", strerror(errno));
316 		return;
317 	}
318 
319 	wpa_printf(MSG_DEBUG, "random: Got %u/%u bytes from /dev/random",
320 		   (unsigned) res,
321 		   (unsigned) (sizeof(dummy_key) - dummy_key_avail));
322 	dummy_key_avail += res;
323 
324 	if (dummy_key_avail == sizeof(dummy_key)) {
325 		random_close_fd();
326 		if (own_pool_ready < MIN_READY_MARK)
327 			own_pool_ready = MIN_READY_MARK;
328 		random_write_entropy();
329 	}
330 }
331 
332 #endif /* __linux__ */
333 
334 
335 static void random_read_entropy(void)
336 {
337 	char *buf;
338 	size_t len;
339 
340 	if (!random_entropy_file)
341 		return;
342 
343 	buf = os_readfile(random_entropy_file, &len);
344 	if (buf == NULL)
345 		return; /* entropy file not yet available */
346 
347 	if (len != 1 + RANDOM_ENTROPY_SIZE) {
348 		wpa_printf(MSG_DEBUG, "random: Invalid entropy file %s",
349 			   random_entropy_file);
350 		os_free(buf);
351 		return;
352 	}
353 
354 	own_pool_ready = (u8) buf[0];
355 	random_add_randomness(buf + 1, RANDOM_ENTROPY_SIZE);
356 	random_entropy_file_read = 1;
357 	os_free(buf);
358 	wpa_printf(MSG_DEBUG, "random: Added entropy from %s "
359 		   "(own_pool_ready=%u)",
360 		   random_entropy_file, own_pool_ready);
361 }
362 
363 
364 static void random_write_entropy(void)
365 {
366 	char buf[RANDOM_ENTROPY_SIZE];
367 	FILE *f;
368 	u8 opr;
369 	int fail = 0;
370 
371 	if (!random_entropy_file)
372 		return;
373 
374 	if (random_get_bytes(buf, RANDOM_ENTROPY_SIZE) < 0)
375 		return;
376 
377 	f = fopen(random_entropy_file, "wb");
378 	if (f == NULL) {
379 		wpa_printf(MSG_ERROR, "random: Could not open entropy file %s "
380 			   "for writing", random_entropy_file);
381 		return;
382 	}
383 
384 	opr = own_pool_ready > 0xff ? 0xff : own_pool_ready;
385 	if (fwrite(&opr, 1, 1, f) != 1 ||
386 	    fwrite(buf, RANDOM_ENTROPY_SIZE, 1, f) != 1)
387 		fail = 1;
388 	fclose(f);
389 	if (fail) {
390 		wpa_printf(MSG_ERROR, "random: Could not write entropy data "
391 			   "to %s", random_entropy_file);
392 		return;
393 	}
394 
395 	wpa_printf(MSG_DEBUG, "random: Updated entropy file %s "
396 		   "(own_pool_ready=%u)",
397 		   random_entropy_file, own_pool_ready);
398 }
399 
400 
401 void random_init(const char *entropy_file)
402 {
403 	os_free(random_entropy_file);
404 	if (entropy_file)
405 		random_entropy_file = os_strdup(entropy_file);
406 	else
407 		random_entropy_file = NULL;
408 	random_read_entropy();
409 
410 #ifdef __linux__
411 	if (random_fd >= 0)
412 		return;
413 
414 	random_fd = open("/dev/random", O_RDONLY | O_NONBLOCK);
415 	if (random_fd < 0) {
416 		wpa_printf(MSG_ERROR, "random: Cannot open /dev/random: %s",
417 			   strerror(errno));
418 		return;
419 	}
420 	wpa_printf(MSG_DEBUG, "random: Trying to read entropy from "
421 		   "/dev/random");
422 
423 	eloop_register_read_sock(random_fd, random_read_fd, NULL, NULL);
424 #endif /* __linux__ */
425 
426 	random_write_entropy();
427 }
428 
429 
430 void random_deinit(void)
431 {
432 #ifdef __linux__
433 	random_close_fd();
434 #endif /* __linux__ */
435 	random_write_entropy();
436 	os_free(random_entropy_file);
437 	random_entropy_file = NULL;
438 }
439