xref: /freebsd/contrib/wpa/src/crypto/random.c (revision 1f4bcc459a76b7aa664f3fd557684cd0ba6da352)
1 /*
2  * Random number generator
3  * Copyright (c) 2010-2011, Jouni Malinen <j@w1.fi>
4  *
5  * This software may be distributed under the terms of the BSD license.
6  * See README for more details.
7  *
8  * This random number generator is used to provide additional entropy to the
9  * one provided by the operating system (os_get_random()) for session key
10  * generation. The os_get_random() output is expected to be secure and the
11  * implementation here is expected to provide only limited protection against
12  * cases where os_get_random() cannot provide strong randomness. This
13  * implementation shall not be assumed to be secure as the sole source of
14  * randomness. The random_get_bytes() function mixes in randomness from
15  * os_get_random() and as such, calls to os_get_random() can be replaced with
16  * calls to random_get_bytes() without reducing security.
17  *
18  * The design here follows partially the design used in the Linux
19  * drivers/char/random.c, but the implementation here is simpler and not as
20  * strong. This is a compromise to reduce duplicated CPU effort and to avoid
21  * extra code/memory size. As pointed out above, os_get_random() needs to be
22  * guaranteed to be secure for any of the security assumptions to hold.
23  */
24 
25 #include "utils/includes.h"
26 #ifdef __linux__
27 #include <fcntl.h>
28 #endif /* __linux__ */
29 
30 #include "utils/common.h"
31 #include "utils/eloop.h"
32 #include "crypto/crypto.h"
33 #include "sha1.h"
34 #include "random.h"
35 
36 #define POOL_WORDS 32
37 #define POOL_WORDS_MASK (POOL_WORDS - 1)
38 #define POOL_TAP1 26
39 #define POOL_TAP2 20
40 #define POOL_TAP3 14
41 #define POOL_TAP4 7
42 #define POOL_TAP5 1
43 #define EXTRACT_LEN 16
44 #define MIN_READY_MARK 2
45 
46 static u32 pool[POOL_WORDS];
47 static unsigned int input_rotate = 0;
48 static unsigned int pool_pos = 0;
49 static u8 dummy_key[20];
50 #ifdef __linux__
51 static size_t dummy_key_avail = 0;
52 static int random_fd = -1;
53 #endif /* __linux__ */
54 static unsigned int own_pool_ready = 0;
55 #define RANDOM_ENTROPY_SIZE 20
56 static char *random_entropy_file = NULL;
57 static int random_entropy_file_read = 0;
58 
59 #define MIN_COLLECT_ENTROPY 1000
60 static unsigned int entropy = 0;
61 static unsigned int total_collected = 0;
62 
63 
64 static void random_write_entropy(void);
65 
66 
67 static u32 __ROL32(u32 x, u32 y)
68 {
69 	return (x << (y & 31)) | (x >> (32 - (y & 31)));
70 }
71 
72 
73 static void random_mix_pool(const void *buf, size_t len)
74 {
75 	static const u32 twist[8] = {
76 		0x00000000, 0x3b6e20c8, 0x76dc4190, 0x4db26158,
77 		0xedb88320, 0xd6d6a3e8, 0x9b64c2b0, 0xa00ae278
78 	};
79 	const u8 *pos = buf;
80 	u32 w;
81 
82 	wpa_hexdump_key(MSG_EXCESSIVE, "random_mix_pool", buf, len);
83 
84 	while (len--) {
85 		w = __ROL32(*pos++, input_rotate & 31);
86 		input_rotate += pool_pos ? 7 : 14;
87 		pool_pos = (pool_pos - 1) & POOL_WORDS_MASK;
88 		w ^= pool[pool_pos];
89 		w ^= pool[(pool_pos + POOL_TAP1) & POOL_WORDS_MASK];
90 		w ^= pool[(pool_pos + POOL_TAP2) & POOL_WORDS_MASK];
91 		w ^= pool[(pool_pos + POOL_TAP3) & POOL_WORDS_MASK];
92 		w ^= pool[(pool_pos + POOL_TAP4) & POOL_WORDS_MASK];
93 		w ^= pool[(pool_pos + POOL_TAP5) & POOL_WORDS_MASK];
94 		pool[pool_pos] = (w >> 3) ^ twist[w & 7];
95 	}
96 }
97 
98 
99 static void random_extract(u8 *out)
100 {
101 	unsigned int i;
102 	u8 hash[SHA1_MAC_LEN];
103 	u32 *hash_ptr;
104 	u32 buf[POOL_WORDS / 2];
105 
106 	/* First, add hash back to pool to make backtracking more difficult. */
107 	hmac_sha1(dummy_key, sizeof(dummy_key), (const u8 *) pool,
108 		  sizeof(pool), hash);
109 	random_mix_pool(hash, sizeof(hash));
110 	/* Hash half the pool to extra data */
111 	for (i = 0; i < POOL_WORDS / 2; i++)
112 		buf[i] = pool[(pool_pos - i) & POOL_WORDS_MASK];
113 	hmac_sha1(dummy_key, sizeof(dummy_key), (const u8 *) buf,
114 		  sizeof(buf), hash);
115 	/*
116 	 * Fold the hash to further reduce any potential output pattern.
117 	 * Though, compromise this to reduce CPU use for the most common output
118 	 * length (32) and return 16 bytes from instead of only half.
119 	 */
120 	hash_ptr = (u32 *) hash;
121 	hash_ptr[0] ^= hash_ptr[4];
122 	os_memcpy(out, hash, EXTRACT_LEN);
123 }
124 
125 
126 void random_add_randomness(const void *buf, size_t len)
127 {
128 	struct os_time t;
129 	static unsigned int count = 0;
130 
131 	count++;
132 	if (entropy > MIN_COLLECT_ENTROPY && (count & 0x3ff) != 0) {
133 		/*
134 		 * No need to add more entropy at this point, so save CPU and
135 		 * skip the update.
136 		 */
137 		return;
138 	}
139 	wpa_printf(MSG_EXCESSIVE, "Add randomness: count=%u entropy=%u",
140 		   count, entropy);
141 
142 	os_get_time(&t);
143 	wpa_hexdump_key(MSG_EXCESSIVE, "random pool",
144 			(const u8 *) pool, sizeof(pool));
145 	random_mix_pool(&t, sizeof(t));
146 	random_mix_pool(buf, len);
147 	wpa_hexdump_key(MSG_EXCESSIVE, "random pool",
148 			(const u8 *) pool, sizeof(pool));
149 	entropy++;
150 	total_collected++;
151 }
152 
153 
154 int random_get_bytes(void *buf, size_t len)
155 {
156 	int ret;
157 	u8 *bytes = buf;
158 	size_t left;
159 
160 	wpa_printf(MSG_MSGDUMP, "Get randomness: len=%u entropy=%u",
161 		   (unsigned int) len, entropy);
162 
163 	/* Start with assumed strong randomness from OS */
164 	ret = os_get_random(buf, len);
165 	wpa_hexdump_key(MSG_EXCESSIVE, "random from os_get_random",
166 			buf, len);
167 
168 	/* Mix in additional entropy extracted from the internal pool */
169 	left = len;
170 	while (left) {
171 		size_t siz, i;
172 		u8 tmp[EXTRACT_LEN];
173 		random_extract(tmp);
174 		wpa_hexdump_key(MSG_EXCESSIVE, "random from internal pool",
175 				tmp, sizeof(tmp));
176 		siz = left > EXTRACT_LEN ? EXTRACT_LEN : left;
177 		for (i = 0; i < siz; i++)
178 			*bytes++ ^= tmp[i];
179 		left -= siz;
180 	}
181 
182 #ifdef CONFIG_FIPS
183 	/* Mix in additional entropy from the crypto module */
184 	bytes = buf;
185 	left = len;
186 	while (left) {
187 		size_t siz, i;
188 		u8 tmp[EXTRACT_LEN];
189 		if (crypto_get_random(tmp, sizeof(tmp)) < 0) {
190 			wpa_printf(MSG_ERROR, "random: No entropy available "
191 				   "for generating strong random bytes");
192 			return -1;
193 		}
194 		wpa_hexdump_key(MSG_EXCESSIVE, "random from crypto module",
195 				tmp, sizeof(tmp));
196 		siz = left > EXTRACT_LEN ? EXTRACT_LEN : left;
197 		for (i = 0; i < siz; i++)
198 			*bytes++ ^= tmp[i];
199 		left -= siz;
200 	}
201 #endif /* CONFIG_FIPS */
202 
203 	wpa_hexdump_key(MSG_EXCESSIVE, "mixed random", buf, len);
204 
205 	if (entropy < len)
206 		entropy = 0;
207 	else
208 		entropy -= len;
209 
210 	return ret;
211 }
212 
213 
214 int random_pool_ready(void)
215 {
216 #ifdef __linux__
217 	int fd;
218 	ssize_t res;
219 
220 	/*
221 	 * Make sure that there is reasonable entropy available before allowing
222 	 * some key derivation operations to proceed.
223 	 */
224 
225 	if (dummy_key_avail == sizeof(dummy_key))
226 		return 1; /* Already initialized - good to continue */
227 
228 	/*
229 	 * Try to fetch some more data from the kernel high quality
230 	 * /dev/random. There may not be enough data available at this point,
231 	 * so use non-blocking read to avoid blocking the application
232 	 * completely.
233 	 */
234 	fd = open("/dev/random", O_RDONLY | O_NONBLOCK);
235 	if (fd < 0) {
236 		wpa_printf(MSG_ERROR, "random: Cannot open /dev/random: %s",
237 			   strerror(errno));
238 		return -1;
239 	}
240 
241 	res = read(fd, dummy_key + dummy_key_avail,
242 		   sizeof(dummy_key) - dummy_key_avail);
243 	if (res < 0) {
244 		wpa_printf(MSG_ERROR, "random: Cannot read from /dev/random: "
245 			   "%s", strerror(errno));
246 		res = 0;
247 	}
248 	wpa_printf(MSG_DEBUG, "random: Got %u/%u bytes from "
249 		   "/dev/random", (unsigned) res,
250 		   (unsigned) (sizeof(dummy_key) - dummy_key_avail));
251 	dummy_key_avail += res;
252 	close(fd);
253 
254 	if (dummy_key_avail == sizeof(dummy_key)) {
255 		if (own_pool_ready < MIN_READY_MARK)
256 			own_pool_ready = MIN_READY_MARK;
257 		random_write_entropy();
258 		return 1;
259 	}
260 
261 	wpa_printf(MSG_INFO, "random: Only %u/%u bytes of strong "
262 		   "random data available from /dev/random",
263 		   (unsigned) dummy_key_avail, (unsigned) sizeof(dummy_key));
264 
265 	if (own_pool_ready >= MIN_READY_MARK ||
266 	    total_collected + 10 * own_pool_ready > MIN_COLLECT_ENTROPY) {
267 		wpa_printf(MSG_INFO, "random: Allow operation to proceed "
268 			   "based on internal entropy");
269 		return 1;
270 	}
271 
272 	wpa_printf(MSG_INFO, "random: Not enough entropy pool available for "
273 		   "secure operations");
274 	return 0;
275 #else /* __linux__ */
276 	/* TODO: could do similar checks on non-Linux platforms */
277 	return 1;
278 #endif /* __linux__ */
279 }
280 
281 
282 void random_mark_pool_ready(void)
283 {
284 	own_pool_ready++;
285 	wpa_printf(MSG_DEBUG, "random: Mark internal entropy pool to be "
286 		   "ready (count=%u/%u)", own_pool_ready, MIN_READY_MARK);
287 	random_write_entropy();
288 }
289 
290 
291 #ifdef __linux__
292 
293 static void random_close_fd(void)
294 {
295 	if (random_fd >= 0) {
296 		eloop_unregister_read_sock(random_fd);
297 		close(random_fd);
298 		random_fd = -1;
299 	}
300 }
301 
302 
303 static void random_read_fd(int sock, void *eloop_ctx, void *sock_ctx)
304 {
305 	ssize_t res;
306 
307 	if (dummy_key_avail == sizeof(dummy_key)) {
308 		random_close_fd();
309 		return;
310 	}
311 
312 	res = read(sock, dummy_key + dummy_key_avail,
313 		   sizeof(dummy_key) - dummy_key_avail);
314 	if (res < 0) {
315 		wpa_printf(MSG_ERROR, "random: Cannot read from /dev/random: "
316 			   "%s", strerror(errno));
317 		return;
318 	}
319 
320 	wpa_printf(MSG_DEBUG, "random: Got %u/%u bytes from /dev/random",
321 		   (unsigned) res,
322 		   (unsigned) (sizeof(dummy_key) - dummy_key_avail));
323 	dummy_key_avail += res;
324 
325 	if (dummy_key_avail == sizeof(dummy_key)) {
326 		random_close_fd();
327 		if (own_pool_ready < MIN_READY_MARK)
328 			own_pool_ready = MIN_READY_MARK;
329 		random_write_entropy();
330 	}
331 }
332 
333 #endif /* __linux__ */
334 
335 
336 static void random_read_entropy(void)
337 {
338 	char *buf;
339 	size_t len;
340 
341 	if (!random_entropy_file)
342 		return;
343 
344 	buf = os_readfile(random_entropy_file, &len);
345 	if (buf == NULL)
346 		return; /* entropy file not yet available */
347 
348 	if (len != 1 + RANDOM_ENTROPY_SIZE) {
349 		wpa_printf(MSG_DEBUG, "random: Invalid entropy file %s",
350 			   random_entropy_file);
351 		os_free(buf);
352 		return;
353 	}
354 
355 	own_pool_ready = (u8) buf[0];
356 	random_add_randomness(buf + 1, RANDOM_ENTROPY_SIZE);
357 	random_entropy_file_read = 1;
358 	os_free(buf);
359 	wpa_printf(MSG_DEBUG, "random: Added entropy from %s "
360 		   "(own_pool_ready=%u)",
361 		   random_entropy_file, own_pool_ready);
362 }
363 
364 
365 static void random_write_entropy(void)
366 {
367 	char buf[RANDOM_ENTROPY_SIZE];
368 	FILE *f;
369 	u8 opr;
370 	int fail = 0;
371 
372 	if (!random_entropy_file)
373 		return;
374 
375 	if (random_get_bytes(buf, RANDOM_ENTROPY_SIZE) < 0)
376 		return;
377 
378 	f = fopen(random_entropy_file, "wb");
379 	if (f == NULL) {
380 		wpa_printf(MSG_ERROR, "random: Could not open entropy file %s "
381 			   "for writing", random_entropy_file);
382 		return;
383 	}
384 
385 	opr = own_pool_ready > 0xff ? 0xff : own_pool_ready;
386 	if (fwrite(&opr, 1, 1, f) != 1 ||
387 	    fwrite(buf, RANDOM_ENTROPY_SIZE, 1, f) != 1)
388 		fail = 1;
389 	fclose(f);
390 	if (fail) {
391 		wpa_printf(MSG_ERROR, "random: Could not write entropy data "
392 			   "to %s", random_entropy_file);
393 		return;
394 	}
395 
396 	wpa_printf(MSG_DEBUG, "random: Updated entropy file %s "
397 		   "(own_pool_ready=%u)",
398 		   random_entropy_file, own_pool_ready);
399 }
400 
401 
402 void random_init(const char *entropy_file)
403 {
404 	os_free(random_entropy_file);
405 	if (entropy_file)
406 		random_entropy_file = os_strdup(entropy_file);
407 	else
408 		random_entropy_file = NULL;
409 	random_read_entropy();
410 
411 #ifdef __linux__
412 	if (random_fd >= 0)
413 		return;
414 
415 	random_fd = open("/dev/random", O_RDONLY | O_NONBLOCK);
416 	if (random_fd < 0) {
417 		wpa_printf(MSG_ERROR, "random: Cannot open /dev/random: %s",
418 			   strerror(errno));
419 		return;
420 	}
421 	wpa_printf(MSG_DEBUG, "random: Trying to read entropy from "
422 		   "/dev/random");
423 
424 	eloop_register_read_sock(random_fd, random_read_fd, NULL, NULL);
425 #endif /* __linux__ */
426 
427 	random_write_entropy();
428 }
429 
430 
431 void random_deinit(void)
432 {
433 #ifdef __linux__
434 	random_close_fd();
435 #endif /* __linux__ */
436 	random_write_entropy();
437 	os_free(random_entropy_file);
438 	random_entropy_file = NULL;
439 }
440