xref: /freebsd/contrib/wpa/src/common/wpa_ctrl.h (revision 49b49cda41feabe3439f7318e8bf40e3896c7bf4)
1 /*
2  * wpa_supplicant/hostapd control interface library
3  * Copyright (c) 2004-2006, Jouni Malinen <j@w1.fi>
4  *
5  * This software may be distributed under the terms of the BSD license.
6  * See README for more details.
7  */
8 
9 #ifndef WPA_CTRL_H
10 #define WPA_CTRL_H
11 
12 #ifdef  __cplusplus
13 extern "C" {
14 #endif
15 
16 /* wpa_supplicant control interface - fixed message prefixes */
17 
18 /** Interactive request for identity/password/pin */
19 #define WPA_CTRL_REQ "CTRL-REQ-"
20 
21 /** Response to identity/password/pin request */
22 #define WPA_CTRL_RSP "CTRL-RSP-"
23 
24 /* Event messages with fixed prefix */
25 /** Authentication completed successfully and data connection enabled */
26 #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED "
27 /** Disconnected, data connection is not available */
28 #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED "
29 /** Association rejected during connection attempt */
30 #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT "
31 /** Authentication rejected during connection attempt */
32 #define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT "
33 /** wpa_supplicant is exiting */
34 #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING "
35 /** Password change was completed successfully */
36 #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED "
37 /** EAP-Request/Notification received */
38 #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION "
39 /** EAP authentication started (EAP-Request/Identity received) */
40 #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED "
41 /** EAP method proposed by the server */
42 #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD "
43 /** EAP method selected */
44 #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD "
45 /** EAP peer certificate from TLS */
46 #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT "
47 /** EAP peer certificate alternative subject name component from TLS */
48 #define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT "
49 /** EAP TLS certificate chain validation error */
50 #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR "
51 /** EAP status */
52 #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS "
53 /** EAP authentication completed successfully */
54 #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS "
55 /** EAP authentication failed (EAP-Failure received) */
56 #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE "
57 /** Network block temporarily disabled (e.g., due to authentication failure) */
58 #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED "
59 /** Temporarily disabled network block re-enabled */
60 #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED "
61 /** New scan started */
62 #define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED "
63 /** New scan results available */
64 #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS "
65 /** Scan command failed */
66 #define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED "
67 /** wpa_supplicant state change */
68 #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE "
69 /** A new BSS entry was added (followed by BSS entry id and BSSID) */
70 #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED "
71 /** A BSS entry was removed (followed by BSS entry id and BSSID) */
72 #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED "
73 /** No suitable network was found */
74 #define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND "
75 /** Change in the signal level was reported by the driver */
76 #define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE "
77 /** Regulatory domain channel */
78 #define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE "
79 
80 /** RSN IBSS 4-way handshakes completed with specified peer */
81 #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED "
82 
83 /** Notification of frequency conflict due to a concurrent operation.
84  *
85  * The indicated network is disabled and needs to be re-enabled before it can
86  * be used again.
87  */
88 #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT "
89 /** Frequency ranges that the driver recommends to avoid */
90 #define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ "
91 /** WPS overlap detected in PBC mode */
92 #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED "
93 /** Available WPS AP with active PBC found in scan results */
94 #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC "
95 /** Available WPS AP with our address as authorized in scan results */
96 #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH "
97 /** Available WPS AP with recently selected PIN registrar found in scan results
98  */
99 #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN "
100 /** Available WPS AP found in scan results */
101 #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE "
102 /** A new credential received */
103 #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED "
104 /** M2D received */
105 #define WPS_EVENT_M2D "WPS-M2D "
106 /** WPS registration failed after M2/M2D */
107 #define WPS_EVENT_FAIL "WPS-FAIL "
108 /** WPS registration completed successfully */
109 #define WPS_EVENT_SUCCESS "WPS-SUCCESS "
110 /** WPS enrollment attempt timed out and was terminated */
111 #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT "
112 /* PBC mode was activated */
113 #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE "
114 /* PBC mode was disabled */
115 #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE "
116 
117 #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN "
118 
119 #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK "
120 
121 /* WPS ER events */
122 #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD "
123 #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE "
124 #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD "
125 #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE "
126 #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS "
127 #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG "
128 
129 /* MESH events */
130 #define MESH_GROUP_STARTED "MESH-GROUP-STARTED "
131 #define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED "
132 #define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED "
133 #define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED "
134 /** Mesh SAE authentication failure. Wrong password suspected. */
135 #define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE "
136 #define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED "
137 
138 /* WMM AC events */
139 #define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED "
140 #define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED "
141 #define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED "
142 
143 /** P2P device found */
144 #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND "
145 
146 /** P2P device lost */
147 #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST "
148 
149 /** A P2P device requested GO negotiation, but we were not ready to start the
150  * negotiation */
151 #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST "
152 #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS "
153 #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE "
154 #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS "
155 #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE "
156 #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED "
157 #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED "
158 #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE "
159 #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE "
160 /* parameters: <peer address> <PIN> */
161 #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN "
162 /* parameters: <peer address> */
163 #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN "
164 /* parameters: <peer address> */
165 #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ "
166 /* parameters: <peer address> */
167 #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP "
168 /* parameters: <peer address> <status> */
169 #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE"
170 /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */
171 #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ "
172 /* parameters: <src addr> <update indicator> <TLVs> */
173 #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP "
174 #define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP "
175 #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED "
176 #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT "
177 #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED "
178 #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id="
179 #define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE "
180 #define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO "
181 #define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT "
182 #define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT "
183 #define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG "
184 #define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED "
185 
186 /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */
187 #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT "
188 #define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP "
189 
190 #define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START "
191 #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE "
192 
193 #define INTERWORKING_AP "INTERWORKING-AP "
194 #define INTERWORKING_BLACKLISTED "INTERWORKING-BLACKLISTED "
195 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH "
196 #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED "
197 #define INTERWORKING_SELECTED "INTERWORKING-SELECTED "
198 
199 /* Credential block added; parameters: <id> */
200 #define CRED_ADDED "CRED-ADDED "
201 /* Credential block modified; parameters: <id> <field> */
202 #define CRED_MODIFIED "CRED-MODIFIED "
203 /* Credential block removed; parameters: <id> */
204 #define CRED_REMOVED "CRED-REMOVED "
205 
206 #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO "
207 /* parameters: <addr> <dialog_token> <freq> */
208 #define GAS_QUERY_START "GAS-QUERY-START "
209 /* parameters: <addr> <dialog_token> <freq> <status_code> <result> */
210 #define GAS_QUERY_DONE "GAS-QUERY-DONE "
211 
212 /* parameters: <addr> <result> */
213 #define ANQP_QUERY_DONE "ANQP-QUERY-DONE "
214 
215 #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION "
216 #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE "
217 
218 #define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START "
219 #define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT "
220 
221 #define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED "
222 #define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED "
223 
224 /* hostapd control interface - fixed message prefixes */
225 #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED "
226 #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS "
227 #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS "
228 #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED "
229 #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED "
230 #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED "
231 #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED "
232 #define AP_STA_CONNECTED "AP-STA-CONNECTED "
233 #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED "
234 #define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH "
235 
236 #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA "
237 #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA "
238 
239 #define AP_EVENT_ENABLED "AP-ENABLED "
240 #define AP_EVENT_DISABLED "AP-DISABLED "
241 
242 #define INTERFACE_ENABLED "INTERFACE-ENABLED "
243 #define INTERFACE_DISABLED "INTERFACE-DISABLED "
244 
245 #define ACS_EVENT_STARTED "ACS-STARTED "
246 #define ACS_EVENT_COMPLETED "ACS-COMPLETED "
247 #define ACS_EVENT_FAILED "ACS-FAILED "
248 
249 #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED "
250 #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL "
251 #define DFS_EVENT_CAC_START "DFS-CAC-START "
252 #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED "
253 #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED "
254 
255 #define AP_CSA_FINISHED "AP-CSA-FINISHED "
256 
257 /* BSS Transition Management Response frame received */
258 #define BSS_TM_RESP "BSS-TM-RESP "
259 
260 /* BSS command information masks */
261 
262 #define WPA_BSS_MASK_ALL		0xFFFDFFFF
263 #define WPA_BSS_MASK_ID			BIT(0)
264 #define WPA_BSS_MASK_BSSID		BIT(1)
265 #define WPA_BSS_MASK_FREQ		BIT(2)
266 #define WPA_BSS_MASK_BEACON_INT		BIT(3)
267 #define WPA_BSS_MASK_CAPABILITIES	BIT(4)
268 #define WPA_BSS_MASK_QUAL		BIT(5)
269 #define WPA_BSS_MASK_NOISE		BIT(6)
270 #define WPA_BSS_MASK_LEVEL		BIT(7)
271 #define WPA_BSS_MASK_TSF		BIT(8)
272 #define WPA_BSS_MASK_AGE		BIT(9)
273 #define WPA_BSS_MASK_IE			BIT(10)
274 #define WPA_BSS_MASK_FLAGS		BIT(11)
275 #define WPA_BSS_MASK_SSID		BIT(12)
276 #define WPA_BSS_MASK_WPS_SCAN		BIT(13)
277 #define WPA_BSS_MASK_P2P_SCAN		BIT(14)
278 #define WPA_BSS_MASK_INTERNETW		BIT(15)
279 #define WPA_BSS_MASK_WIFI_DISPLAY	BIT(16)
280 #define WPA_BSS_MASK_DELIM		BIT(17)
281 #define WPA_BSS_MASK_MESH_SCAN		BIT(18)
282 #define WPA_BSS_MASK_SNR		BIT(19)
283 #define WPA_BSS_MASK_EST_THROUGHPUT	BIT(20)
284 #define WPA_BSS_MASK_FST		BIT(21)
285 
286 
287 /* VENDOR_ELEM_* frame id values */
288 enum wpa_vendor_elem_frame {
289 	VENDOR_ELEM_PROBE_REQ_P2P = 0,
290 	VENDOR_ELEM_PROBE_RESP_P2P = 1,
291 	VENDOR_ELEM_PROBE_RESP_P2P_GO = 2,
292 	VENDOR_ELEM_BEACON_P2P_GO = 3,
293 	VENDOR_ELEM_P2P_PD_REQ = 4,
294 	VENDOR_ELEM_P2P_PD_RESP = 5,
295 	VENDOR_ELEM_P2P_GO_NEG_REQ = 6,
296 	VENDOR_ELEM_P2P_GO_NEG_RESP = 7,
297 	VENDOR_ELEM_P2P_GO_NEG_CONF = 8,
298 	VENDOR_ELEM_P2P_INV_REQ = 9,
299 	VENDOR_ELEM_P2P_INV_RESP = 10,
300 	VENDOR_ELEM_P2P_ASSOC_REQ = 11,
301 	VENDOR_ELEM_P2P_ASSOC_RESP = 12,
302 	VENDOR_ELEM_ASSOC_REQ = 13,
303 	NUM_VENDOR_ELEM_FRAMES
304 };
305 
306 
307 /* wpa_supplicant/hostapd control interface access */
308 
309 /**
310  * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd
311  * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
312  * Returns: Pointer to abstract control interface data or %NULL on failure
313  *
314  * This function is used to open a control interface to wpa_supplicant/hostapd.
315  * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path
316  * is configured in wpa_supplicant/hostapd and other programs using the control
317  * interface need to use matching path configuration.
318  */
319 struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path);
320 
321 /**
322  * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd
323  * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used.
324  * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket
325  *            is used.
326  * Returns: Pointer to abstract control interface data or %NULL on failure
327  *
328  * This function is used to open a control interface to wpa_supplicant/hostapd
329  * when the socket path for client need to be specified explicitly. Default
330  * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client
331  * socket path is /tmp.
332  */
333 struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path);
334 
335 
336 /**
337  * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd
338  * @ctrl: Control interface data from wpa_ctrl_open()
339  *
340  * This function is used to close a control interface.
341  */
342 void wpa_ctrl_close(struct wpa_ctrl *ctrl);
343 
344 
345 /**
346  * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd
347  * @ctrl: Control interface data from wpa_ctrl_open()
348  * @cmd: Command; usually, ASCII text, e.g., "PING"
349  * @cmd_len: Length of the cmd in bytes
350  * @reply: Buffer for the response
351  * @reply_len: Reply buffer length
352  * @msg_cb: Callback function for unsolicited messages or %NULL if not used
353  * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout
354  *
355  * This function is used to send commands to wpa_supplicant/hostapd. Received
356  * response will be written to reply and reply_len is set to the actual length
357  * of the reply. This function will block for up to two seconds while waiting
358  * for the reply. If unsolicited messages are received, the blocking time may
359  * be longer.
360  *
361  * msg_cb can be used to register a callback function that will be called for
362  * unsolicited messages received while waiting for the command response. These
363  * messages may be received if wpa_ctrl_request() is called at the same time as
364  * wpa_supplicant/hostapd is sending such a message. This can happen only if
365  * the program has used wpa_ctrl_attach() to register itself as a monitor for
366  * event messages. Alternatively to msg_cb, programs can register two control
367  * interface connections and use one of them for commands and the other one for
368  * receiving event messages, in other words, call wpa_ctrl_attach() only for
369  * the control interface connection that will be used for event messages.
370  */
371 int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len,
372 		     char *reply, size_t *reply_len,
373 		     void (*msg_cb)(char *msg, size_t len));
374 
375 
376 /**
377  * wpa_ctrl_attach - Register as an event monitor for the control interface
378  * @ctrl: Control interface data from wpa_ctrl_open()
379  * Returns: 0 on success, -1 on failure, -2 on timeout
380  *
381  * This function registers the control interface connection as a monitor for
382  * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the
383  * control interface connection starts receiving event messages that can be
384  * read with wpa_ctrl_recv().
385  */
386 int wpa_ctrl_attach(struct wpa_ctrl *ctrl);
387 
388 
389 /**
390  * wpa_ctrl_detach - Unregister event monitor from the control interface
391  * @ctrl: Control interface data from wpa_ctrl_open()
392  * Returns: 0 on success, -1 on failure, -2 on timeout
393  *
394  * This function unregisters the control interface connection as a monitor for
395  * wpa_supplicant/hostapd events, i.e., cancels the registration done with
396  * wpa_ctrl_attach().
397  */
398 int wpa_ctrl_detach(struct wpa_ctrl *ctrl);
399 
400 
401 /**
402  * wpa_ctrl_recv - Receive a pending control interface message
403  * @ctrl: Control interface data from wpa_ctrl_open()
404  * @reply: Buffer for the message data
405  * @reply_len: Length of the reply buffer
406  * Returns: 0 on success, -1 on failure
407  *
408  * This function will receive a pending control interface message. The received
409  * response will be written to reply and reply_len is set to the actual length
410  * of the reply.
411 
412  * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach()
413  * must have been used to register the control interface as an event monitor.
414  */
415 int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len);
416 
417 
418 /**
419  * wpa_ctrl_pending - Check whether there are pending event messages
420  * @ctrl: Control interface data from wpa_ctrl_open()
421  * Returns: 1 if there are pending messages, 0 if no, or -1 on error
422  *
423  * This function will check whether there are any pending control interface
424  * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is
425  * only used for event messages, i.e., wpa_ctrl_attach() must have been used to
426  * register the control interface as an event monitor.
427  */
428 int wpa_ctrl_pending(struct wpa_ctrl *ctrl);
429 
430 
431 /**
432  * wpa_ctrl_get_fd - Get file descriptor used by the control interface
433  * @ctrl: Control interface data from wpa_ctrl_open()
434  * Returns: File descriptor used for the connection
435  *
436  * This function can be used to get the file descriptor that is used for the
437  * control interface connection. The returned value can be used, e.g., with
438  * select() while waiting for multiple events.
439  *
440  * The returned file descriptor must not be used directly for sending or
441  * receiving packets; instead, the library functions wpa_ctrl_request() and
442  * wpa_ctrl_recv() must be used for this.
443  */
444 int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl);
445 
446 #ifdef ANDROID
447 /**
448  * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that
449  * may be left over from clients that were previously connected to
450  * wpa_supplicant. This keeps these files from being orphaned in the
451  * event of crashes that prevented them from being removed as part
452  * of the normal orderly shutdown.
453  */
454 void wpa_ctrl_cleanup(void);
455 #endif /* ANDROID */
456 
457 #ifdef CONFIG_CTRL_IFACE_UDP
458 /* Port range for multiple wpa_supplicant instances and multiple VIFs */
459 #define WPA_CTRL_IFACE_PORT 9877
460 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */
461 #define WPA_GLOBAL_CTRL_IFACE_PORT 9878
462 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */
463 
464 char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl);
465 #endif /* CONFIG_CTRL_IFACE_UDP */
466 
467 
468 #ifdef  __cplusplus
469 }
470 #endif
471 
472 #endif /* WPA_CTRL_H */
473