1 /* 2 * wpa_supplicant/hostapd control interface library 3 * Copyright (c) 2004-2006, Jouni Malinen <j@w1.fi> 4 * 5 * This software may be distributed under the terms of the BSD license. 6 * See README for more details. 7 */ 8 9 #ifndef WPA_CTRL_H 10 #define WPA_CTRL_H 11 12 #ifdef __cplusplus 13 extern "C" { 14 #endif 15 16 /* wpa_supplicant control interface - fixed message prefixes */ 17 18 /** Interactive request for identity/password/pin */ 19 #define WPA_CTRL_REQ "CTRL-REQ-" 20 21 /** Response to identity/password/pin request */ 22 #define WPA_CTRL_RSP "CTRL-RSP-" 23 24 /* Event messages with fixed prefix */ 25 /** Authentication completed successfully and data connection enabled */ 26 #define WPA_EVENT_CONNECTED "CTRL-EVENT-CONNECTED " 27 /** Disconnected, data connection is not available */ 28 #define WPA_EVENT_DISCONNECTED "CTRL-EVENT-DISCONNECTED " 29 /** Association rejected during connection attempt */ 30 #define WPA_EVENT_ASSOC_REJECT "CTRL-EVENT-ASSOC-REJECT " 31 /** Authentication rejected during connection attempt */ 32 #define WPA_EVENT_AUTH_REJECT "CTRL-EVENT-AUTH-REJECT " 33 /** wpa_supplicant is exiting */ 34 #define WPA_EVENT_TERMINATING "CTRL-EVENT-TERMINATING " 35 /** Password change was completed successfully */ 36 #define WPA_EVENT_PASSWORD_CHANGED "CTRL-EVENT-PASSWORD-CHANGED " 37 /** EAP-Request/Notification received */ 38 #define WPA_EVENT_EAP_NOTIFICATION "CTRL-EVENT-EAP-NOTIFICATION " 39 /** EAP authentication started (EAP-Request/Identity received) */ 40 #define WPA_EVENT_EAP_STARTED "CTRL-EVENT-EAP-STARTED " 41 /** EAP method proposed by the server */ 42 #define WPA_EVENT_EAP_PROPOSED_METHOD "CTRL-EVENT-EAP-PROPOSED-METHOD " 43 /** EAP method selected */ 44 #define WPA_EVENT_EAP_METHOD "CTRL-EVENT-EAP-METHOD " 45 /** EAP peer certificate from TLS */ 46 #define WPA_EVENT_EAP_PEER_CERT "CTRL-EVENT-EAP-PEER-CERT " 47 /** EAP peer certificate alternative subject name component from TLS */ 48 #define WPA_EVENT_EAP_PEER_ALT "CTRL-EVENT-EAP-PEER-ALT " 49 /** EAP TLS certificate chain validation error */ 50 #define WPA_EVENT_EAP_TLS_CERT_ERROR "CTRL-EVENT-EAP-TLS-CERT-ERROR " 51 /** EAP status */ 52 #define WPA_EVENT_EAP_STATUS "CTRL-EVENT-EAP-STATUS " 53 /** EAP authentication completed successfully */ 54 #define WPA_EVENT_EAP_SUCCESS "CTRL-EVENT-EAP-SUCCESS " 55 /** EAP authentication failed (EAP-Failure received) */ 56 #define WPA_EVENT_EAP_FAILURE "CTRL-EVENT-EAP-FAILURE " 57 /** Network block temporarily disabled (e.g., due to authentication failure) */ 58 #define WPA_EVENT_TEMP_DISABLED "CTRL-EVENT-SSID-TEMP-DISABLED " 59 /** Temporarily disabled network block re-enabled */ 60 #define WPA_EVENT_REENABLED "CTRL-EVENT-SSID-REENABLED " 61 /** New scan started */ 62 #define WPA_EVENT_SCAN_STARTED "CTRL-EVENT-SCAN-STARTED " 63 /** New scan results available */ 64 #define WPA_EVENT_SCAN_RESULTS "CTRL-EVENT-SCAN-RESULTS " 65 /** Scan command failed */ 66 #define WPA_EVENT_SCAN_FAILED "CTRL-EVENT-SCAN-FAILED " 67 /** wpa_supplicant state change */ 68 #define WPA_EVENT_STATE_CHANGE "CTRL-EVENT-STATE-CHANGE " 69 /** A new BSS entry was added (followed by BSS entry id and BSSID) */ 70 #define WPA_EVENT_BSS_ADDED "CTRL-EVENT-BSS-ADDED " 71 /** A BSS entry was removed (followed by BSS entry id and BSSID) */ 72 #define WPA_EVENT_BSS_REMOVED "CTRL-EVENT-BSS-REMOVED " 73 /** No suitable network was found */ 74 #define WPA_EVENT_NETWORK_NOT_FOUND "CTRL-EVENT-NETWORK-NOT-FOUND " 75 /** Change in the signal level was reported by the driver */ 76 #define WPA_EVENT_SIGNAL_CHANGE "CTRL-EVENT-SIGNAL-CHANGE " 77 /** Regulatory domain channel */ 78 #define WPA_EVENT_REGDOM_CHANGE "CTRL-EVENT-REGDOM-CHANGE " 79 /** Channel switch (followed by freq=<MHz> and other channel parameters) */ 80 #define WPA_EVENT_CHANNEL_SWITCH "CTRL-EVENT-CHANNEL-SWITCH " 81 82 /** IP subnet status change notification 83 * 84 * When using an offloaded roaming mechanism where driver/firmware takes care 85 * of roaming and IP subnet validation checks post-roaming, this event can 86 * indicate whether IP subnet has changed. 87 * 88 * The event has a status=<0/1/2> parameter where 89 * 0 = unknown 90 * 1 = IP subnet unchanged (can continue to use the old IP address) 91 * 2 = IP subnet changed (need to get a new IP address) 92 */ 93 #define WPA_EVENT_SUBNET_STATUS_UPDATE "CTRL-EVENT-SUBNET-STATUS-UPDATE " 94 95 /** RSN IBSS 4-way handshakes completed with specified peer */ 96 #define IBSS_RSN_COMPLETED "IBSS-RSN-COMPLETED " 97 98 /** Notification of frequency conflict due to a concurrent operation. 99 * 100 * The indicated network is disabled and needs to be re-enabled before it can 101 * be used again. 102 */ 103 #define WPA_EVENT_FREQ_CONFLICT "CTRL-EVENT-FREQ-CONFLICT " 104 /** Frequency ranges that the driver recommends to avoid */ 105 #define WPA_EVENT_AVOID_FREQ "CTRL-EVENT-AVOID-FREQ " 106 /** WPS overlap detected in PBC mode */ 107 #define WPS_EVENT_OVERLAP "WPS-OVERLAP-DETECTED " 108 /** Available WPS AP with active PBC found in scan results */ 109 #define WPS_EVENT_AP_AVAILABLE_PBC "WPS-AP-AVAILABLE-PBC " 110 /** Available WPS AP with our address as authorized in scan results */ 111 #define WPS_EVENT_AP_AVAILABLE_AUTH "WPS-AP-AVAILABLE-AUTH " 112 /** Available WPS AP with recently selected PIN registrar found in scan results 113 */ 114 #define WPS_EVENT_AP_AVAILABLE_PIN "WPS-AP-AVAILABLE-PIN " 115 /** Available WPS AP found in scan results */ 116 #define WPS_EVENT_AP_AVAILABLE "WPS-AP-AVAILABLE " 117 /** A new credential received */ 118 #define WPS_EVENT_CRED_RECEIVED "WPS-CRED-RECEIVED " 119 /** M2D received */ 120 #define WPS_EVENT_M2D "WPS-M2D " 121 /** WPS registration failed after M2/M2D */ 122 #define WPS_EVENT_FAIL "WPS-FAIL " 123 /** WPS registration completed successfully */ 124 #define WPS_EVENT_SUCCESS "WPS-SUCCESS " 125 /** WPS enrollment attempt timed out and was terminated */ 126 #define WPS_EVENT_TIMEOUT "WPS-TIMEOUT " 127 /* PBC mode was activated */ 128 #define WPS_EVENT_ACTIVE "WPS-PBC-ACTIVE " 129 /* PBC mode was disabled */ 130 #define WPS_EVENT_DISABLE "WPS-PBC-DISABLE " 131 132 #define WPS_EVENT_ENROLLEE_SEEN "WPS-ENROLLEE-SEEN " 133 134 #define WPS_EVENT_OPEN_NETWORK "WPS-OPEN-NETWORK " 135 136 /* WPS ER events */ 137 #define WPS_EVENT_ER_AP_ADD "WPS-ER-AP-ADD " 138 #define WPS_EVENT_ER_AP_REMOVE "WPS-ER-AP-REMOVE " 139 #define WPS_EVENT_ER_ENROLLEE_ADD "WPS-ER-ENROLLEE-ADD " 140 #define WPS_EVENT_ER_ENROLLEE_REMOVE "WPS-ER-ENROLLEE-REMOVE " 141 #define WPS_EVENT_ER_AP_SETTINGS "WPS-ER-AP-SETTINGS " 142 #define WPS_EVENT_ER_SET_SEL_REG "WPS-ER-AP-SET-SEL-REG " 143 144 /* MESH events */ 145 #define MESH_GROUP_STARTED "MESH-GROUP-STARTED " 146 #define MESH_GROUP_REMOVED "MESH-GROUP-REMOVED " 147 #define MESH_PEER_CONNECTED "MESH-PEER-CONNECTED " 148 #define MESH_PEER_DISCONNECTED "MESH-PEER-DISCONNECTED " 149 /** Mesh SAE authentication failure. Wrong password suspected. */ 150 #define MESH_SAE_AUTH_FAILURE "MESH-SAE-AUTH-FAILURE " 151 #define MESH_SAE_AUTH_BLOCKED "MESH-SAE-AUTH-BLOCKED " 152 153 /* WMM AC events */ 154 #define WMM_AC_EVENT_TSPEC_ADDED "TSPEC-ADDED " 155 #define WMM_AC_EVENT_TSPEC_REMOVED "TSPEC-REMOVED " 156 #define WMM_AC_EVENT_TSPEC_REQ_FAILED "TSPEC-REQ-FAILED " 157 158 /** P2P device found */ 159 #define P2P_EVENT_DEVICE_FOUND "P2P-DEVICE-FOUND " 160 161 /** P2P device lost */ 162 #define P2P_EVENT_DEVICE_LOST "P2P-DEVICE-LOST " 163 164 /** A P2P device requested GO negotiation, but we were not ready to start the 165 * negotiation */ 166 #define P2P_EVENT_GO_NEG_REQUEST "P2P-GO-NEG-REQUEST " 167 #define P2P_EVENT_GO_NEG_SUCCESS "P2P-GO-NEG-SUCCESS " 168 #define P2P_EVENT_GO_NEG_FAILURE "P2P-GO-NEG-FAILURE " 169 #define P2P_EVENT_GROUP_FORMATION_SUCCESS "P2P-GROUP-FORMATION-SUCCESS " 170 #define P2P_EVENT_GROUP_FORMATION_FAILURE "P2P-GROUP-FORMATION-FAILURE " 171 #define P2P_EVENT_GROUP_STARTED "P2P-GROUP-STARTED " 172 #define P2P_EVENT_GROUP_REMOVED "P2P-GROUP-REMOVED " 173 #define P2P_EVENT_CROSS_CONNECT_ENABLE "P2P-CROSS-CONNECT-ENABLE " 174 #define P2P_EVENT_CROSS_CONNECT_DISABLE "P2P-CROSS-CONNECT-DISABLE " 175 /* parameters: <peer address> <PIN> */ 176 #define P2P_EVENT_PROV_DISC_SHOW_PIN "P2P-PROV-DISC-SHOW-PIN " 177 /* parameters: <peer address> */ 178 #define P2P_EVENT_PROV_DISC_ENTER_PIN "P2P-PROV-DISC-ENTER-PIN " 179 /* parameters: <peer address> */ 180 #define P2P_EVENT_PROV_DISC_PBC_REQ "P2P-PROV-DISC-PBC-REQ " 181 /* parameters: <peer address> */ 182 #define P2P_EVENT_PROV_DISC_PBC_RESP "P2P-PROV-DISC-PBC-RESP " 183 /* parameters: <peer address> <status> */ 184 #define P2P_EVENT_PROV_DISC_FAILURE "P2P-PROV-DISC-FAILURE" 185 /* parameters: <freq> <src addr> <dialog token> <update indicator> <TLVs> */ 186 #define P2P_EVENT_SERV_DISC_REQ "P2P-SERV-DISC-REQ " 187 /* parameters: <src addr> <update indicator> <TLVs> */ 188 #define P2P_EVENT_SERV_DISC_RESP "P2P-SERV-DISC-RESP " 189 #define P2P_EVENT_SERV_ASP_RESP "P2P-SERV-ASP-RESP " 190 #define P2P_EVENT_INVITATION_RECEIVED "P2P-INVITATION-RECEIVED " 191 #define P2P_EVENT_INVITATION_RESULT "P2P-INVITATION-RESULT " 192 #define P2P_EVENT_INVITATION_ACCEPTED "P2P-INVITATION-ACCEPTED " 193 #define P2P_EVENT_FIND_STOPPED "P2P-FIND-STOPPED " 194 #define P2P_EVENT_PERSISTENT_PSK_FAIL "P2P-PERSISTENT-PSK-FAIL id=" 195 #define P2P_EVENT_PRESENCE_RESPONSE "P2P-PRESENCE-RESPONSE " 196 #define P2P_EVENT_NFC_BOTH_GO "P2P-NFC-BOTH-GO " 197 #define P2P_EVENT_NFC_PEER_CLIENT "P2P-NFC-PEER-CLIENT " 198 #define P2P_EVENT_NFC_WHILE_CLIENT "P2P-NFC-WHILE-CLIENT " 199 #define P2P_EVENT_FALLBACK_TO_GO_NEG "P2P-FALLBACK-TO-GO-NEG " 200 #define P2P_EVENT_FALLBACK_TO_GO_NEG_ENABLED "P2P-FALLBACK-TO-GO-NEG-ENABLED " 201 202 /* parameters: <PMF enabled> <timeout in ms> <Session Information URL> */ 203 #define ESS_DISASSOC_IMMINENT "ESS-DISASSOC-IMMINENT " 204 #define P2P_EVENT_REMOVE_AND_REFORM_GROUP "P2P-REMOVE-AND-REFORM-GROUP " 205 206 #define P2P_EVENT_P2PS_PROVISION_START "P2PS-PROV-START " 207 #define P2P_EVENT_P2PS_PROVISION_DONE "P2PS-PROV-DONE " 208 209 #define INTERWORKING_AP "INTERWORKING-AP " 210 #define INTERWORKING_BLACKLISTED "INTERWORKING-BLACKLISTED " 211 #define INTERWORKING_NO_MATCH "INTERWORKING-NO-MATCH " 212 #define INTERWORKING_ALREADY_CONNECTED "INTERWORKING-ALREADY-CONNECTED " 213 #define INTERWORKING_SELECTED "INTERWORKING-SELECTED " 214 215 /* Credential block added; parameters: <id> */ 216 #define CRED_ADDED "CRED-ADDED " 217 /* Credential block modified; parameters: <id> <field> */ 218 #define CRED_MODIFIED "CRED-MODIFIED " 219 /* Credential block removed; parameters: <id> */ 220 #define CRED_REMOVED "CRED-REMOVED " 221 222 #define GAS_RESPONSE_INFO "GAS-RESPONSE-INFO " 223 /* parameters: <addr> <dialog_token> <freq> */ 224 #define GAS_QUERY_START "GAS-QUERY-START " 225 /* parameters: <addr> <dialog_token> <freq> <status_code> <result> */ 226 #define GAS_QUERY_DONE "GAS-QUERY-DONE " 227 228 /* parameters: <addr> <result> */ 229 #define ANQP_QUERY_DONE "ANQP-QUERY-DONE " 230 231 #define RX_ANQP "RX-ANQP " 232 #define RX_HS20_ANQP "RX-HS20-ANQP " 233 #define RX_HS20_ANQP_ICON "RX-HS20-ANQP-ICON " 234 #define RX_HS20_ICON "RX-HS20-ICON " 235 236 #define HS20_SUBSCRIPTION_REMEDIATION "HS20-SUBSCRIPTION-REMEDIATION " 237 #define HS20_DEAUTH_IMMINENT_NOTICE "HS20-DEAUTH-IMMINENT-NOTICE " 238 239 #define EXT_RADIO_WORK_START "EXT-RADIO-WORK-START " 240 #define EXT_RADIO_WORK_TIMEOUT "EXT-RADIO-WORK-TIMEOUT " 241 242 #define RRM_EVENT_NEIGHBOR_REP_RXED "RRM-NEIGHBOR-REP-RECEIVED " 243 #define RRM_EVENT_NEIGHBOR_REP_FAILED "RRM-NEIGHBOR-REP-REQUEST-FAILED " 244 245 /* hostapd control interface - fixed message prefixes */ 246 #define WPS_EVENT_PIN_NEEDED "WPS-PIN-NEEDED " 247 #define WPS_EVENT_NEW_AP_SETTINGS "WPS-NEW-AP-SETTINGS " 248 #define WPS_EVENT_REG_SUCCESS "WPS-REG-SUCCESS " 249 #define WPS_EVENT_AP_SETUP_LOCKED "WPS-AP-SETUP-LOCKED " 250 #define WPS_EVENT_AP_SETUP_UNLOCKED "WPS-AP-SETUP-UNLOCKED " 251 #define WPS_EVENT_AP_PIN_ENABLED "WPS-AP-PIN-ENABLED " 252 #define WPS_EVENT_AP_PIN_DISABLED "WPS-AP-PIN-DISABLED " 253 #define AP_STA_CONNECTED "AP-STA-CONNECTED " 254 #define AP_STA_DISCONNECTED "AP-STA-DISCONNECTED " 255 #define AP_STA_POSSIBLE_PSK_MISMATCH "AP-STA-POSSIBLE-PSK-MISMATCH " 256 #define AP_STA_POLL_OK "AP-STA-POLL-OK " 257 258 #define AP_REJECTED_MAX_STA "AP-REJECTED-MAX-STA " 259 #define AP_REJECTED_BLOCKED_STA "AP-REJECTED-BLOCKED-STA " 260 261 #define AP_EVENT_ENABLED "AP-ENABLED " 262 #define AP_EVENT_DISABLED "AP-DISABLED " 263 264 #define INTERFACE_ENABLED "INTERFACE-ENABLED " 265 #define INTERFACE_DISABLED "INTERFACE-DISABLED " 266 267 #define ACS_EVENT_STARTED "ACS-STARTED " 268 #define ACS_EVENT_COMPLETED "ACS-COMPLETED " 269 #define ACS_EVENT_FAILED "ACS-FAILED " 270 271 #define DFS_EVENT_RADAR_DETECTED "DFS-RADAR-DETECTED " 272 #define DFS_EVENT_NEW_CHANNEL "DFS-NEW-CHANNEL " 273 #define DFS_EVENT_CAC_START "DFS-CAC-START " 274 #define DFS_EVENT_CAC_COMPLETED "DFS-CAC-COMPLETED " 275 #define DFS_EVENT_NOP_FINISHED "DFS-NOP-FINISHED " 276 277 #define AP_CSA_FINISHED "AP-CSA-FINISHED " 278 279 #define P2P_EVENT_LISTEN_OFFLOAD_STOP "P2P-LISTEN-OFFLOAD-STOPPED " 280 #define P2P_LISTEN_OFFLOAD_STOP_REASON "P2P-LISTEN-OFFLOAD-STOP-REASON " 281 282 /* BSS Transition Management Response frame received */ 283 #define BSS_TM_RESP "BSS-TM-RESP " 284 285 /* MBO IE with cellular data connection preference received */ 286 #define MBO_CELL_PREFERENCE "MBO-CELL-PREFERENCE " 287 288 /* BSS Transition Management Request received with MBO transition reason */ 289 #define MBO_TRANSITION_REASON "MBO-TRANSITION-REASON " 290 291 /* BSS command information masks */ 292 293 #define WPA_BSS_MASK_ALL 0xFFFDFFFF 294 #define WPA_BSS_MASK_ID BIT(0) 295 #define WPA_BSS_MASK_BSSID BIT(1) 296 #define WPA_BSS_MASK_FREQ BIT(2) 297 #define WPA_BSS_MASK_BEACON_INT BIT(3) 298 #define WPA_BSS_MASK_CAPABILITIES BIT(4) 299 #define WPA_BSS_MASK_QUAL BIT(5) 300 #define WPA_BSS_MASK_NOISE BIT(6) 301 #define WPA_BSS_MASK_LEVEL BIT(7) 302 #define WPA_BSS_MASK_TSF BIT(8) 303 #define WPA_BSS_MASK_AGE BIT(9) 304 #define WPA_BSS_MASK_IE BIT(10) 305 #define WPA_BSS_MASK_FLAGS BIT(11) 306 #define WPA_BSS_MASK_SSID BIT(12) 307 #define WPA_BSS_MASK_WPS_SCAN BIT(13) 308 #define WPA_BSS_MASK_P2P_SCAN BIT(14) 309 #define WPA_BSS_MASK_INTERNETW BIT(15) 310 #define WPA_BSS_MASK_WIFI_DISPLAY BIT(16) 311 #define WPA_BSS_MASK_DELIM BIT(17) 312 #define WPA_BSS_MASK_MESH_SCAN BIT(18) 313 #define WPA_BSS_MASK_SNR BIT(19) 314 #define WPA_BSS_MASK_EST_THROUGHPUT BIT(20) 315 #define WPA_BSS_MASK_FST BIT(21) 316 317 318 /* VENDOR_ELEM_* frame id values */ 319 enum wpa_vendor_elem_frame { 320 VENDOR_ELEM_PROBE_REQ_P2P = 0, 321 VENDOR_ELEM_PROBE_RESP_P2P = 1, 322 VENDOR_ELEM_PROBE_RESP_P2P_GO = 2, 323 VENDOR_ELEM_BEACON_P2P_GO = 3, 324 VENDOR_ELEM_P2P_PD_REQ = 4, 325 VENDOR_ELEM_P2P_PD_RESP = 5, 326 VENDOR_ELEM_P2P_GO_NEG_REQ = 6, 327 VENDOR_ELEM_P2P_GO_NEG_RESP = 7, 328 VENDOR_ELEM_P2P_GO_NEG_CONF = 8, 329 VENDOR_ELEM_P2P_INV_REQ = 9, 330 VENDOR_ELEM_P2P_INV_RESP = 10, 331 VENDOR_ELEM_P2P_ASSOC_REQ = 11, 332 VENDOR_ELEM_P2P_ASSOC_RESP = 12, 333 VENDOR_ELEM_ASSOC_REQ = 13, 334 VENDOR_ELEM_PROBE_REQ = 14, 335 NUM_VENDOR_ELEM_FRAMES 336 }; 337 338 339 /* wpa_supplicant/hostapd control interface access */ 340 341 /** 342 * wpa_ctrl_open - Open a control interface to wpa_supplicant/hostapd 343 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used. 344 * Returns: Pointer to abstract control interface data or %NULL on failure 345 * 346 * This function is used to open a control interface to wpa_supplicant/hostapd. 347 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd. This path 348 * is configured in wpa_supplicant/hostapd and other programs using the control 349 * interface need to use matching path configuration. 350 */ 351 struct wpa_ctrl * wpa_ctrl_open(const char *ctrl_path); 352 353 /** 354 * wpa_ctrl_open2 - Open a control interface to wpa_supplicant/hostapd 355 * @ctrl_path: Path for UNIX domain sockets; ignored if UDP sockets are used. 356 * @cli_path: Path for client UNIX domain sockets; ignored if UDP socket 357 * is used. 358 * Returns: Pointer to abstract control interface data or %NULL on failure 359 * 360 * This function is used to open a control interface to wpa_supplicant/hostapd 361 * when the socket path for client need to be specified explicitly. Default 362 * ctrl_path is usually /var/run/wpa_supplicant or /var/run/hostapd and client 363 * socket path is /tmp. 364 */ 365 struct wpa_ctrl * wpa_ctrl_open2(const char *ctrl_path, const char *cli_path); 366 367 368 /** 369 * wpa_ctrl_close - Close a control interface to wpa_supplicant/hostapd 370 * @ctrl: Control interface data from wpa_ctrl_open() 371 * 372 * This function is used to close a control interface. 373 */ 374 void wpa_ctrl_close(struct wpa_ctrl *ctrl); 375 376 377 /** 378 * wpa_ctrl_request - Send a command to wpa_supplicant/hostapd 379 * @ctrl: Control interface data from wpa_ctrl_open() 380 * @cmd: Command; usually, ASCII text, e.g., "PING" 381 * @cmd_len: Length of the cmd in bytes 382 * @reply: Buffer for the response 383 * @reply_len: Reply buffer length 384 * @msg_cb: Callback function for unsolicited messages or %NULL if not used 385 * Returns: 0 on success, -1 on error (send or receive failed), -2 on timeout 386 * 387 * This function is used to send commands to wpa_supplicant/hostapd. Received 388 * response will be written to reply and reply_len is set to the actual length 389 * of the reply. This function will block for up to two seconds while waiting 390 * for the reply. If unsolicited messages are received, the blocking time may 391 * be longer. 392 * 393 * msg_cb can be used to register a callback function that will be called for 394 * unsolicited messages received while waiting for the command response. These 395 * messages may be received if wpa_ctrl_request() is called at the same time as 396 * wpa_supplicant/hostapd is sending such a message. This can happen only if 397 * the program has used wpa_ctrl_attach() to register itself as a monitor for 398 * event messages. Alternatively to msg_cb, programs can register two control 399 * interface connections and use one of them for commands and the other one for 400 * receiving event messages, in other words, call wpa_ctrl_attach() only for 401 * the control interface connection that will be used for event messages. 402 */ 403 int wpa_ctrl_request(struct wpa_ctrl *ctrl, const char *cmd, size_t cmd_len, 404 char *reply, size_t *reply_len, 405 void (*msg_cb)(char *msg, size_t len)); 406 407 408 /** 409 * wpa_ctrl_attach - Register as an event monitor for the control interface 410 * @ctrl: Control interface data from wpa_ctrl_open() 411 * Returns: 0 on success, -1 on failure, -2 on timeout 412 * 413 * This function registers the control interface connection as a monitor for 414 * wpa_supplicant/hostapd events. After a success wpa_ctrl_attach() call, the 415 * control interface connection starts receiving event messages that can be 416 * read with wpa_ctrl_recv(). 417 */ 418 int wpa_ctrl_attach(struct wpa_ctrl *ctrl); 419 420 421 /** 422 * wpa_ctrl_detach - Unregister event monitor from the control interface 423 * @ctrl: Control interface data from wpa_ctrl_open() 424 * Returns: 0 on success, -1 on failure, -2 on timeout 425 * 426 * This function unregisters the control interface connection as a monitor for 427 * wpa_supplicant/hostapd events, i.e., cancels the registration done with 428 * wpa_ctrl_attach(). 429 */ 430 int wpa_ctrl_detach(struct wpa_ctrl *ctrl); 431 432 433 /** 434 * wpa_ctrl_recv - Receive a pending control interface message 435 * @ctrl: Control interface data from wpa_ctrl_open() 436 * @reply: Buffer for the message data 437 * @reply_len: Length of the reply buffer 438 * Returns: 0 on success, -1 on failure 439 * 440 * This function will receive a pending control interface message. The received 441 * response will be written to reply and reply_len is set to the actual length 442 * of the reply. 443 444 * wpa_ctrl_recv() is only used for event messages, i.e., wpa_ctrl_attach() 445 * must have been used to register the control interface as an event monitor. 446 */ 447 int wpa_ctrl_recv(struct wpa_ctrl *ctrl, char *reply, size_t *reply_len); 448 449 450 /** 451 * wpa_ctrl_pending - Check whether there are pending event messages 452 * @ctrl: Control interface data from wpa_ctrl_open() 453 * Returns: 1 if there are pending messages, 0 if no, or -1 on error 454 * 455 * This function will check whether there are any pending control interface 456 * message available to be received with wpa_ctrl_recv(). wpa_ctrl_pending() is 457 * only used for event messages, i.e., wpa_ctrl_attach() must have been used to 458 * register the control interface as an event monitor. 459 */ 460 int wpa_ctrl_pending(struct wpa_ctrl *ctrl); 461 462 463 /** 464 * wpa_ctrl_get_fd - Get file descriptor used by the control interface 465 * @ctrl: Control interface data from wpa_ctrl_open() 466 * Returns: File descriptor used for the connection 467 * 468 * This function can be used to get the file descriptor that is used for the 469 * control interface connection. The returned value can be used, e.g., with 470 * select() while waiting for multiple events. 471 * 472 * The returned file descriptor must not be used directly for sending or 473 * receiving packets; instead, the library functions wpa_ctrl_request() and 474 * wpa_ctrl_recv() must be used for this. 475 */ 476 int wpa_ctrl_get_fd(struct wpa_ctrl *ctrl); 477 478 #ifdef ANDROID 479 /** 480 * wpa_ctrl_cleanup() - Delete any local UNIX domain socket files that 481 * may be left over from clients that were previously connected to 482 * wpa_supplicant. This keeps these files from being orphaned in the 483 * event of crashes that prevented them from being removed as part 484 * of the normal orderly shutdown. 485 */ 486 void wpa_ctrl_cleanup(void); 487 #endif /* ANDROID */ 488 489 #ifdef CONFIG_CTRL_IFACE_UDP 490 /* Port range for multiple wpa_supplicant instances and multiple VIFs */ 491 #define WPA_CTRL_IFACE_PORT 9877 492 #define WPA_CTRL_IFACE_PORT_LIMIT 50 /* decremented from start */ 493 #define WPA_GLOBAL_CTRL_IFACE_PORT 9878 494 #define WPA_GLOBAL_CTRL_IFACE_PORT_LIMIT 20 /* incremented from start */ 495 496 char * wpa_ctrl_get_remote_ifname(struct wpa_ctrl *ctrl); 497 #endif /* CONFIG_CTRL_IFACE_UDP */ 498 499 500 #ifdef __cplusplus 501 } 502 #endif 503 504 #endif /* WPA_CTRL_H */ 505