1 /* 2 * WPA Supplicant - Common definitions 3 * Copyright (c) 2004-2008, Jouni Malinen <j@w1.fi> 4 * 5 * This software may be distributed under the terms of the BSD license. 6 * See README for more details. 7 */ 8 9 #ifndef DEFS_H 10 #define DEFS_H 11 12 #ifdef FALSE 13 #undef FALSE 14 #endif 15 #ifdef TRUE 16 #undef TRUE 17 #endif 18 typedef enum { FALSE = 0, TRUE = 1 } Boolean; 19 20 21 #define WPA_CIPHER_NONE BIT(0) 22 #define WPA_CIPHER_WEP40 BIT(1) 23 #define WPA_CIPHER_WEP104 BIT(2) 24 #define WPA_CIPHER_TKIP BIT(3) 25 #define WPA_CIPHER_CCMP BIT(4) 26 #ifdef CONFIG_IEEE80211W 27 #define WPA_CIPHER_AES_128_CMAC BIT(5) 28 #endif /* CONFIG_IEEE80211W */ 29 #define WPA_CIPHER_GCMP BIT(6) 30 #define WPA_CIPHER_SMS4 BIT(7) 31 32 #define WPA_KEY_MGMT_IEEE8021X BIT(0) 33 #define WPA_KEY_MGMT_PSK BIT(1) 34 #define WPA_KEY_MGMT_NONE BIT(2) 35 #define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3) 36 #define WPA_KEY_MGMT_WPA_NONE BIT(4) 37 #define WPA_KEY_MGMT_FT_IEEE8021X BIT(5) 38 #define WPA_KEY_MGMT_FT_PSK BIT(6) 39 #define WPA_KEY_MGMT_IEEE8021X_SHA256 BIT(7) 40 #define WPA_KEY_MGMT_PSK_SHA256 BIT(8) 41 #define WPA_KEY_MGMT_WPS BIT(9) 42 #define WPA_KEY_MGMT_SAE BIT(10) 43 #define WPA_KEY_MGMT_FT_SAE BIT(11) 44 #define WPA_KEY_MGMT_WAPI_PSK BIT(12) 45 #define WPA_KEY_MGMT_WAPI_CERT BIT(13) 46 #define WPA_KEY_MGMT_CCKM BIT(14) 47 48 static inline int wpa_key_mgmt_wpa_ieee8021x(int akm) 49 { 50 return !!(akm & (WPA_KEY_MGMT_IEEE8021X | 51 WPA_KEY_MGMT_FT_IEEE8021X | 52 WPA_KEY_MGMT_CCKM | 53 WPA_KEY_MGMT_IEEE8021X_SHA256)); 54 } 55 56 static inline int wpa_key_mgmt_wpa_psk(int akm) 57 { 58 return !!(akm & (WPA_KEY_MGMT_PSK | 59 WPA_KEY_MGMT_FT_PSK | 60 WPA_KEY_MGMT_PSK_SHA256 | 61 WPA_KEY_MGMT_SAE)); 62 } 63 64 static inline int wpa_key_mgmt_ft(int akm) 65 { 66 return !!(akm & (WPA_KEY_MGMT_FT_PSK | 67 WPA_KEY_MGMT_FT_IEEE8021X | 68 WPA_KEY_MGMT_FT_SAE)); 69 } 70 71 static inline int wpa_key_mgmt_sae(int akm) 72 { 73 return !!(akm & (WPA_KEY_MGMT_SAE | 74 WPA_KEY_MGMT_FT_SAE)); 75 } 76 77 static inline int wpa_key_mgmt_sha256(int akm) 78 { 79 return !!(akm & (WPA_KEY_MGMT_PSK_SHA256 | 80 WPA_KEY_MGMT_IEEE8021X_SHA256)); 81 } 82 83 static inline int wpa_key_mgmt_wpa(int akm) 84 { 85 return wpa_key_mgmt_wpa_ieee8021x(akm) || 86 wpa_key_mgmt_wpa_psk(akm); 87 } 88 89 static inline int wpa_key_mgmt_wpa_any(int akm) 90 { 91 return wpa_key_mgmt_wpa(akm) || (akm & WPA_KEY_MGMT_WPA_NONE); 92 } 93 94 static inline int wpa_key_mgmt_cckm(int akm) 95 { 96 return akm == WPA_KEY_MGMT_CCKM; 97 } 98 99 100 #define WPA_PROTO_WPA BIT(0) 101 #define WPA_PROTO_RSN BIT(1) 102 #define WPA_PROTO_WAPI BIT(2) 103 104 #define WPA_AUTH_ALG_OPEN BIT(0) 105 #define WPA_AUTH_ALG_SHARED BIT(1) 106 #define WPA_AUTH_ALG_LEAP BIT(2) 107 #define WPA_AUTH_ALG_FT BIT(3) 108 #define WPA_AUTH_ALG_SAE BIT(4) 109 110 111 enum wpa_alg { 112 WPA_ALG_NONE, 113 WPA_ALG_WEP, 114 WPA_ALG_TKIP, 115 WPA_ALG_CCMP, 116 WPA_ALG_IGTK, 117 WPA_ALG_PMK, 118 WPA_ALG_GCMP, 119 WPA_ALG_SMS4, 120 WPA_ALG_KRK 121 }; 122 123 /** 124 * enum wpa_cipher - Cipher suites 125 */ 126 enum wpa_cipher { 127 CIPHER_NONE, 128 CIPHER_WEP40, 129 CIPHER_TKIP, 130 CIPHER_CCMP, 131 CIPHER_WEP104, 132 CIPHER_GCMP, 133 CIPHER_SMS4 134 }; 135 136 /** 137 * enum wpa_key_mgmt - Key management suites 138 */ 139 enum wpa_key_mgmt { 140 KEY_MGMT_802_1X, 141 KEY_MGMT_PSK, 142 KEY_MGMT_NONE, 143 KEY_MGMT_802_1X_NO_WPA, 144 KEY_MGMT_WPA_NONE, 145 KEY_MGMT_FT_802_1X, 146 KEY_MGMT_FT_PSK, 147 KEY_MGMT_802_1X_SHA256, 148 KEY_MGMT_PSK_SHA256, 149 KEY_MGMT_WPS, 150 KEY_MGMT_SAE, 151 KEY_MGMT_FT_SAE, 152 KEY_MGMT_WAPI_PSK, 153 KEY_MGMT_WAPI_CERT, 154 KEY_MGMT_CCKM 155 }; 156 157 /** 158 * enum wpa_states - wpa_supplicant state 159 * 160 * These enumeration values are used to indicate the current wpa_supplicant 161 * state (wpa_s->wpa_state). The current state can be retrieved with 162 * wpa_supplicant_get_state() function and the state can be changed by calling 163 * wpa_supplicant_set_state(). In WPA state machine (wpa.c and preauth.c), the 164 * wrapper functions wpa_sm_get_state() and wpa_sm_set_state() should be used 165 * to access the state variable. 166 */ 167 enum wpa_states { 168 /** 169 * WPA_DISCONNECTED - Disconnected state 170 * 171 * This state indicates that client is not associated, but is likely to 172 * start looking for an access point. This state is entered when a 173 * connection is lost. 174 */ 175 WPA_DISCONNECTED, 176 177 /** 178 * WPA_INTERFACE_DISABLED - Interface disabled 179 * 180 * This stat eis entered if the network interface is disabled, e.g., 181 * due to rfkill. wpa_supplicant refuses any new operations that would 182 * use the radio until the interface has been enabled. 183 */ 184 WPA_INTERFACE_DISABLED, 185 186 /** 187 * WPA_INACTIVE - Inactive state (wpa_supplicant disabled) 188 * 189 * This state is entered if there are no enabled networks in the 190 * configuration. wpa_supplicant is not trying to associate with a new 191 * network and external interaction (e.g., ctrl_iface call to add or 192 * enable a network) is needed to start association. 193 */ 194 WPA_INACTIVE, 195 196 /** 197 * WPA_SCANNING - Scanning for a network 198 * 199 * This state is entered when wpa_supplicant starts scanning for a 200 * network. 201 */ 202 WPA_SCANNING, 203 204 /** 205 * WPA_AUTHENTICATING - Trying to authenticate with a BSS/SSID 206 * 207 * This state is entered when wpa_supplicant has found a suitable BSS 208 * to authenticate with and the driver is configured to try to 209 * authenticate with this BSS. This state is used only with drivers 210 * that use wpa_supplicant as the SME. 211 */ 212 WPA_AUTHENTICATING, 213 214 /** 215 * WPA_ASSOCIATING - Trying to associate with a BSS/SSID 216 * 217 * This state is entered when wpa_supplicant has found a suitable BSS 218 * to associate with and the driver is configured to try to associate 219 * with this BSS in ap_scan=1 mode. When using ap_scan=2 mode, this 220 * state is entered when the driver is configured to try to associate 221 * with a network using the configured SSID and security policy. 222 */ 223 WPA_ASSOCIATING, 224 225 /** 226 * WPA_ASSOCIATED - Association completed 227 * 228 * This state is entered when the driver reports that association has 229 * been successfully completed with an AP. If IEEE 802.1X is used 230 * (with or without WPA/WPA2), wpa_supplicant remains in this state 231 * until the IEEE 802.1X/EAPOL authentication has been completed. 232 */ 233 WPA_ASSOCIATED, 234 235 /** 236 * WPA_4WAY_HANDSHAKE - WPA 4-Way Key Handshake in progress 237 * 238 * This state is entered when WPA/WPA2 4-Way Handshake is started. In 239 * case of WPA-PSK, this happens when receiving the first EAPOL-Key 240 * frame after association. In case of WPA-EAP, this state is entered 241 * when the IEEE 802.1X/EAPOL authentication has been completed. 242 */ 243 WPA_4WAY_HANDSHAKE, 244 245 /** 246 * WPA_GROUP_HANDSHAKE - WPA Group Key Handshake in progress 247 * 248 * This state is entered when 4-Way Key Handshake has been completed 249 * (i.e., when the supplicant sends out message 4/4) and when Group 250 * Key rekeying is started by the AP (i.e., when supplicant receives 251 * message 1/2). 252 */ 253 WPA_GROUP_HANDSHAKE, 254 255 /** 256 * WPA_COMPLETED - All authentication completed 257 * 258 * This state is entered when the full authentication process is 259 * completed. In case of WPA2, this happens when the 4-Way Handshake is 260 * successfully completed. With WPA, this state is entered after the 261 * Group Key Handshake; with IEEE 802.1X (non-WPA) connection is 262 * completed after dynamic keys are received (or if not used, after 263 * the EAP authentication has been completed). With static WEP keys and 264 * plaintext connections, this state is entered when an association 265 * has been completed. 266 * 267 * This state indicates that the supplicant has completed its 268 * processing for the association phase and that data connection is 269 * fully configured. 270 */ 271 WPA_COMPLETED 272 }; 273 274 #define MLME_SETPROTECTION_PROTECT_TYPE_NONE 0 275 #define MLME_SETPROTECTION_PROTECT_TYPE_RX 1 276 #define MLME_SETPROTECTION_PROTECT_TYPE_TX 2 277 #define MLME_SETPROTECTION_PROTECT_TYPE_RX_TX 3 278 279 #define MLME_SETPROTECTION_KEY_TYPE_GROUP 0 280 #define MLME_SETPROTECTION_KEY_TYPE_PAIRWISE 1 281 282 283 /** 284 * enum mfp_options - Management frame protection (IEEE 802.11w) options 285 */ 286 enum mfp_options { 287 NO_MGMT_FRAME_PROTECTION = 0, 288 MGMT_FRAME_PROTECTION_OPTIONAL = 1, 289 MGMT_FRAME_PROTECTION_REQUIRED = 2, 290 }; 291 #define MGMT_FRAME_PROTECTION_DEFAULT 3 292 293 /** 294 * enum hostapd_hw_mode - Hardware mode 295 */ 296 enum hostapd_hw_mode { 297 HOSTAPD_MODE_IEEE80211B, 298 HOSTAPD_MODE_IEEE80211G, 299 HOSTAPD_MODE_IEEE80211A, 300 HOSTAPD_MODE_IEEE80211AD, 301 NUM_HOSTAPD_MODES 302 }; 303 304 /** 305 * enum wpa_ctrl_req_type - Control interface request types 306 */ 307 enum wpa_ctrl_req_type { 308 WPA_CTRL_REQ_UNKNOWN, 309 WPA_CTRL_REQ_EAP_IDENTITY, 310 WPA_CTRL_REQ_EAP_PASSWORD, 311 WPA_CTRL_REQ_EAP_NEW_PASSWORD, 312 WPA_CTRL_REQ_EAP_PIN, 313 WPA_CTRL_REQ_EAP_OTP, 314 WPA_CTRL_REQ_EAP_PASSPHRASE, 315 NUM_WPA_CTRL_REQS 316 }; 317 318 /* Maximum number of EAP methods to store for EAP server user information */ 319 #define EAP_MAX_METHODS 8 320 321 #endif /* DEFS_H */ 322