1# Example hostapd build time configuration 2# 3# This file lists the configuration options that are used when building the 4# hostapd binary. All lines starting with # are ignored. Configuration option 5# lines must be commented out complete, if they are not to be included, i.e., 6# just setting VARIABLE=n is not disabling that variable. 7# 8# This file is included in Makefile, so variables like CFLAGS and LIBS can also 9# be modified from here. In most cass, these lines should use += in order not 10# to override previous values of the variables. 11 12# Driver interface for Host AP driver 13CONFIG_DRIVER_HOSTAP=y 14 15# Driver interface for wired authenticator 16#CONFIG_DRIVER_WIRED=y 17 18# Driver interface for madwifi driver 19#CONFIG_DRIVER_MADWIFI=y 20#CFLAGS += -I../../madwifi # change to the madwifi source directory 21 22# Driver interface for Prism54 driver 23#CONFIG_DRIVER_PRISM54=y 24 25# Driver interface for drivers using the nl80211 kernel interface 26#CONFIG_DRIVER_NL80211=y 27# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be 28# shipped with your distribution yet. If that is the case, you need to build 29# newer libnl version and point the hostapd build to use it. 30#LIBNL=/usr/src/libnl 31#CFLAGS += -I$(LIBNL)/include 32#LIBS += -L$(LIBNL)/lib 33 34# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) 35#CONFIG_DRIVER_BSD=y 36#CFLAGS += -I/usr/local/include 37#LIBS += -L/usr/local/lib 38 39# Driver interface for no driver (e.g., RADIUS server only) 40#CONFIG_DRIVER_NONE=y 41 42# IEEE 802.11F/IAPP 43CONFIG_IAPP=y 44 45# WPA2/IEEE 802.11i RSN pre-authentication 46CONFIG_RSN_PREAUTH=y 47 48# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) 49CONFIG_PEERKEY=y 50 51# IEEE 802.11w (management frame protection) 52# This version is an experimental implementation based on IEEE 802.11w/D1.0 53# draft and is subject to change since the standard has not yet been finalized. 54# Driver support is also needed for IEEE 802.11w. 55#CONFIG_IEEE80211W=y 56 57# Integrated EAP server 58CONFIG_EAP=y 59 60# EAP-MD5 for the integrated EAP server 61CONFIG_EAP_MD5=y 62 63# EAP-TLS for the integrated EAP server 64CONFIG_EAP_TLS=y 65 66# EAP-MSCHAPv2 for the integrated EAP server 67CONFIG_EAP_MSCHAPV2=y 68 69# EAP-PEAP for the integrated EAP server 70CONFIG_EAP_PEAP=y 71 72# EAP-GTC for the integrated EAP server 73CONFIG_EAP_GTC=y 74 75# EAP-TTLS for the integrated EAP server 76CONFIG_EAP_TTLS=y 77 78# EAP-SIM for the integrated EAP server 79#CONFIG_EAP_SIM=y 80 81# EAP-AKA for the integrated EAP server 82#CONFIG_EAP_AKA=y 83 84# EAP-AKA' for the integrated EAP server 85# This requires CONFIG_EAP_AKA to be enabled, too. 86#CONFIG_EAP_AKA_PRIME=y 87 88# EAP-PAX for the integrated EAP server 89#CONFIG_EAP_PAX=y 90 91# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK) 92#CONFIG_EAP_PSK=y 93 94# EAP-SAKE for the integrated EAP server 95#CONFIG_EAP_SAKE=y 96 97# EAP-GPSK for the integrated EAP server 98#CONFIG_EAP_GPSK=y 99# Include support for optional SHA256 cipher suite in EAP-GPSK 100#CONFIG_EAP_GPSK_SHA256=y 101 102# EAP-FAST for the integrated EAP server 103# Note: Default OpenSSL package does not include support for all the 104# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, 105# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch) 106# to add the needed functions. 107#CONFIG_EAP_FAST=y 108 109# Wi-Fi Protected Setup (WPS) 110#CONFIG_WPS=y 111# Enable UPnP support for external WPS Registrars 112#CONFIG_WPS_UPNP=y 113 114# EAP-IKEv2 115#CONFIG_EAP_IKEV2=y 116 117# Trusted Network Connect (EAP-TNC) 118#CONFIG_EAP_TNC=y 119 120# PKCS#12 (PFX) support (used to read private key and certificate file from 121# a file that usually has extension .p12 or .pfx) 122CONFIG_PKCS12=y 123 124# RADIUS authentication server. This provides access to the integrated EAP 125# server from external hosts using RADIUS. 126#CONFIG_RADIUS_SERVER=y 127 128# Build IPv6 support for RADIUS operations 129CONFIG_IPV6=y 130 131# IEEE Std 802.11r-2008 (Fast BSS Transition) 132#CONFIG_IEEE80211R=y 133 134# Use the hostapd's IEEE 802.11 authentication (ACL), but without 135# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211) 136#CONFIG_DRIVER_RADIUS_ACL=y 137 138# IEEE 802.11n (High Throughput) support 139#CONFIG_IEEE80211N=y 140 141# Remove debugging code that is printing out debug messages to stdout. 142# This can be used to reduce the size of the hostapd considerably if debugging 143# code is not needed. 144#CONFIG_NO_STDOUT_DEBUG=y 145