1 /* 2 * util/module.h - DNS handling module interface 3 * 4 * Copyright (c) 2007, NLnet Labs. All rights reserved. 5 * 6 * This software is open source. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 12 * Redistributions of source code must retain the above copyright notice, 13 * this list of conditions and the following disclaimer. 14 * 15 * Redistributions in binary form must reproduce the above copyright notice, 16 * this list of conditions and the following disclaimer in the documentation 17 * and/or other materials provided with the distribution. 18 * 19 * Neither the name of the NLNET LABS nor the names of its contributors may 20 * be used to endorse or promote products derived from this software without 21 * specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 24 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 25 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 26 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 27 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 28 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 29 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 30 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 31 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 32 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 33 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 34 */ 35 36 /** 37 * \file 38 * 39 * This file contains the interface for DNS handling modules. 40 * 41 * The module interface uses the DNS modules as state machines. The 42 * state machines are activated in sequence to operate on queries. Once 43 * they are done, the reply is passed back. In the usual setup the mesh 44 * is the caller of the state machines and once things are done sends replies 45 * and invokes result callbacks. 46 * 47 * The module provides a number of functions, listed in the module_func_block. 48 * The module is inited and destroyed and memory usage queries, for the 49 * module as a whole, for entire-module state (such as a cache). And per-query 50 * functions are called, operate to move the state machine and cleanup of 51 * the per-query state. 52 * 53 * Most per-query state should simply be allocated in the query region. 54 * This is destroyed at the end of the query. 55 * 56 * The module environment contains services and information and caches 57 * shared by the modules and the rest of the system. It also contains 58 * function pointers for module-specific tasks (like sending queries). 59 * 60 * *** Example module calls for a normal query 61 * 62 * In this example, the query does not need recursion, all the other data 63 * can be found in the cache. This makes the example shorter. 64 * 65 * At the start of the program the iterator module is initialised. 66 * The iterator module sets up its global state, such as donotquery lists 67 * and private address trees. 68 * 69 * A query comes in, and a mesh entry is created for it. The mesh 70 * starts the resolution process. The validator module is the first 71 * in the list of modules, and it is started on this new query. The 72 * operate() function is called. The validator decides it needs not do 73 * anything yet until there is a result and returns wait_module, that 74 * causes the next module in the list to be started. 75 * 76 * The next module is the iterator. It is started on the passed query and 77 * decides to perform a lookup. For this simple example, the delegation 78 * point information is available, and all the iterator wants to do is 79 * send a UDP query. The iterator uses env.send_query() to send the 80 * query. Then the iterator suspends (returns from the operate call). 81 * 82 * When the UDP reply comes back (and on errors and timeouts), the 83 * operate function is called for the query, on the iterator module, 84 * with the event that there is a reply. The iterator decides that this 85 * is enough, the work is done. It returns the value finished from the 86 * operate call, which causes the previous module to be started. 87 * 88 * The previous module, the validator module, is started with the event 89 * that the iterator module is done. The validator decides to validate 90 * the query. Once it is done (which could take recursive lookups, but 91 * in this example no recursive lookups are needed), it returns from the 92 * operate function with finished. 93 * 94 * There is no previous module from the validator module, and the mesh 95 * takes this to mean that the query is finally done. The mesh invokes 96 * callbacks and sends packets to queriers. 97 * 98 * If other modules had been waiting (recursively) on the answer to this 99 * query, then the mesh will tell them about it. It calls the inform_super 100 * routine on all the waiting modules, and once that is done it calls all of 101 * them with the operate() call. During inform_super the query that is done 102 * still exists and information can be copied from it (but the module should 103 * not really re-entry codepoints and services). During the operate call 104 * the modules can use stored state to continue operation with the results. 105 * (network buffers are used to contain the answer packet during the 106 * inform_super phase, but after that the network buffers will be cleared 107 * of their contents so that other tasks can be performed). 108 * 109 * *** Example module calls for recursion 110 * 111 * A module is called in operate, and it decides that it wants to perform 112 * recursion. That is, it wants the full state-machine-list to operate on 113 * a different query. It calls env.attach_sub() to create a new query state. 114 * The routine returns the newly created state, and potentially the module 115 * can edit the module-states for the newly created query (i.e. pass along 116 * some information, like delegation points). The module then suspends, 117 * returns from the operate routine. 118 * 119 * The mesh meanwhile will have the newly created query (or queries) on 120 * a waiting list, and will call operate() on this query (or queries). 121 * It starts again at the start of the module list for them. The query 122 * (or queries) continue to operate their state machines, until they are 123 * done. When they are done the mesh calls inform_super on the module that 124 * wanted the recursion. After that the mesh calls operate() on the module 125 * that wanted to do the recursion, and during this phase the module could, 126 * for example, decide to create more recursions. 127 * 128 * If the module decides it no longer wants the recursive information 129 * it can call detach_subs. Those queries will still run to completion, 130 * potentially filling the cache with information. Inform_super is not 131 * called any more. 132 * 133 * The iterator module will fetch items from the cache, so a recursion 134 * attempt may complete very quickly if the item is in cache. The calling 135 * module has to wait for completion or eventual timeout. A recursive query 136 * that times out returns a servfail rcode (servfail is also returned for 137 * other errors during the lookup). 138 * 139 * Results are passed in the qstate, the rcode member is used to pass 140 * errors without requiring memory allocation, so that the code can continue 141 * in out-of-memory conditions. If the rcode member is 0 (NOERROR) then 142 * the dns_msg entry contains a filled out message. This message may 143 * also contain an rcode that is nonzero, but in this case additional 144 * information (query, additional) can be passed along. 145 * 146 * The rcode and dns_msg are used to pass the result from the the rightmost 147 * module towards the leftmost modules and then towards the user. 148 * 149 * If you want to avoid recursion-cycles where queries need other queries 150 * that need the first one, use detect_cycle() to see if that will happen. 151 * 152 */ 153 154 #ifndef UTIL_MODULE_H 155 #define UTIL_MODULE_H 156 #include "util/storage/lruhash.h" 157 #include "util/data/msgreply.h" 158 #include "util/data/msgparse.h" 159 struct sldns_buffer; 160 struct alloc_cache; 161 struct rrset_cache; 162 struct key_cache; 163 struct config_file; 164 struct slabhash; 165 struct query_info; 166 struct edns_data; 167 struct regional; 168 struct worker; 169 struct module_qstate; 170 struct ub_randstate; 171 struct mesh_area; 172 struct mesh_state; 173 struct val_anchors; 174 struct val_neg_cache; 175 struct iter_forwards; 176 struct iter_hints; 177 178 /** Maximum number of modules in operation */ 179 #define MAX_MODULE 5 180 181 /** 182 * Module environment. 183 * Services and data provided to the module. 184 */ 185 struct module_env { 186 /* --- data --- */ 187 /** config file with config options */ 188 struct config_file* cfg; 189 /** shared message cache */ 190 struct slabhash* msg_cache; 191 /** shared rrset cache */ 192 struct rrset_cache* rrset_cache; 193 /** shared infrastructure cache (edns, lameness) */ 194 struct infra_cache* infra_cache; 195 /** shared key cache */ 196 struct key_cache* key_cache; 197 198 /* --- services --- */ 199 /** 200 * Send serviced DNS query to server. UDP/TCP and EDNS is handled. 201 * operate() should return with wait_reply. Later on a callback 202 * will cause operate() to be called with event timeout or reply. 203 * The time until a timeout is calculated from roundtrip timing, 204 * several UDP retries are attempted. 205 * @param qname: query name. (host order) 206 * @param qnamelen: length in bytes of qname, including trailing 0. 207 * @param qtype: query type. (host order) 208 * @param qclass: query class. (host order) 209 * @param flags: host order flags word, with opcode and CD bit. 210 * @param dnssec: if set, EDNS record will have bits set. 211 * If EDNS_DO bit is set, DO bit is set in EDNS records. 212 * If BIT_CD is set, CD bit is set in queries with EDNS records. 213 * @param want_dnssec: if set, the validator wants DNSSEC. Without 214 * EDNS, the answer is likely to be useless for this domain. 215 * @param addr: where to. 216 * @param addrlen: length of addr. 217 * @param zone: delegation point name. 218 * @param zonelen: length of zone name. 219 * @param q: wich query state to reactivate upon return. 220 * @return: false on failure (memory or socket related). no query was 221 * sent. Or returns an outbound entry with qsent and qstate set. 222 * This outbound_entry will be used on later module invocations 223 * that involve this query (timeout, error or reply). 224 */ 225 struct outbound_entry* (*send_query)(uint8_t* qname, size_t qnamelen, 226 uint16_t qtype, uint16_t qclass, uint16_t flags, int dnssec, 227 int want_dnssec, struct sockaddr_storage* addr, 228 socklen_t addrlen, uint8_t* zone, size_t zonelen, 229 struct module_qstate* q); 230 231 /** 232 * Detach-subqueries. 233 * Remove all sub-query references from this query state. 234 * Keeps super-references of those sub-queries correct. 235 * Updates stat items in mesh_area structure. 236 * @param qstate: used to find mesh state. 237 */ 238 void (*detach_subs)(struct module_qstate* qstate); 239 240 /** 241 * Attach subquery. 242 * Creates it if it does not exist already. 243 * Keeps sub and super references correct. 244 * Updates stat items in mesh_area structure. 245 * Pass if it is priming query or not. 246 * return: 247 * o if error (malloc) happened. 248 * o need to initialise the new state (module init; it is a new state). 249 * so that the next run of the query with this module is successful. 250 * o no init needed, attachment successful. 251 * 252 * @param qstate: the state to find mesh state, and that wants to 253 * receive the results from the new subquery. 254 * @param qinfo: what to query for (copied). 255 * @param qflags: what flags to use (RD, CD flag or not). 256 * @param prime: if it is a (stub) priming query. 257 * @param newq: If the new subquery needs initialisation, it is 258 * returned, otherwise NULL is returned. 259 * @return: false on error, true if success (and init may be needed). 260 */ 261 int (*attach_sub)(struct module_qstate* qstate, 262 struct query_info* qinfo, uint16_t qflags, int prime, 263 struct module_qstate** newq); 264 265 /** 266 * Kill newly attached sub. If attach_sub returns newq for 267 * initialisation, but that fails, then this routine will cleanup and 268 * delete the fresly created sub. 269 * @param newq: the new subquery that is no longer needed. 270 * It is removed. 271 */ 272 void (*kill_sub)(struct module_qstate* newq); 273 274 /** 275 * Detect if adding a dependency for qstate on name,type,class will 276 * create a dependency cycle. 277 * @param qstate: given mesh querystate. 278 * @param qinfo: query info for dependency. 279 * @param flags: query flags of dependency, RD/CD flags. 280 * @param prime: if dependency is a priming query or not. 281 * @return true if the name,type,class exists and the given 282 * qstate mesh exists as a dependency of that name. Thus 283 * if qstate becomes dependent on name,type,class then a 284 * cycle is created. 285 */ 286 int (*detect_cycle)(struct module_qstate* qstate, 287 struct query_info* qinfo, uint16_t flags, int prime); 288 289 /** region for temporary usage. May be cleared after operate() call. */ 290 struct regional* scratch; 291 /** buffer for temporary usage. May be cleared after operate() call. */ 292 struct sldns_buffer* scratch_buffer; 293 /** internal data for daemon - worker thread. */ 294 struct worker* worker; 295 /** mesh area with query state dependencies */ 296 struct mesh_area* mesh; 297 /** allocation service */ 298 struct alloc_cache* alloc; 299 /** random table to generate random numbers */ 300 struct ub_randstate* rnd; 301 /** time in seconds, converted to integer */ 302 time_t* now; 303 /** time in microseconds. Relatively recent. */ 304 struct timeval* now_tv; 305 /** is validation required for messages, controls client-facing 306 * validation status (AD bits) and servfails */ 307 int need_to_validate; 308 /** trusted key storage; these are the configured keys, if not NULL, 309 * otherwise configured by validator. These are the trust anchors, 310 * and are not primed and ready for validation, but on the bright 311 * side, they are read only memory, thus no locks and fast. */ 312 struct val_anchors* anchors; 313 /** negative cache, configured by the validator. if not NULL, 314 * contains NSEC record lookup trees. */ 315 struct val_neg_cache* neg_cache; 316 /** the 5011-probe timer (if any) */ 317 struct comm_timer* probe_timer; 318 /** Mapping of forwarding zones to targets. 319 * iterator forwarder information. per-thread, created by worker */ 320 struct iter_forwards* fwds; 321 /** 322 * iterator forwarder information. per-thread, created by worker. 323 * The hints -- these aren't stored in the cache because they don't 324 * expire. The hints are always used to "prime" the cache. Note 325 * that both root hints and stub zone "hints" are stored in this 326 * data structure. 327 */ 328 struct iter_hints* hints; 329 /** module specific data. indexed by module id. */ 330 void* modinfo[MAX_MODULE]; 331 }; 332 333 /** 334 * External visible states of the module state machine 335 * Modules may also have an internal state. 336 * Modules are supposed to run to completion or until blocked. 337 */ 338 enum module_ext_state { 339 /** initial state - new query */ 340 module_state_initial = 0, 341 /** waiting for reply to outgoing network query */ 342 module_wait_reply, 343 /** module is waiting for another module */ 344 module_wait_module, 345 /** module is waiting for another module; that other is restarted */ 346 module_restart_next, 347 /** module is waiting for sub-query */ 348 module_wait_subquery, 349 /** module could not finish the query */ 350 module_error, 351 /** module is finished with query */ 352 module_finished 353 }; 354 355 /** 356 * Events that happen to modules, that start or wakeup modules. 357 */ 358 enum module_ev { 359 /** new query */ 360 module_event_new = 0, 361 /** query passed by other module */ 362 module_event_pass, 363 /** reply inbound from server */ 364 module_event_reply, 365 /** no reply, timeout or other error */ 366 module_event_noreply, 367 /** reply is there, but capitalisation check failed */ 368 module_event_capsfail, 369 /** next module is done, and its reply is awaiting you */ 370 module_event_moddone, 371 /** error */ 372 module_event_error 373 }; 374 375 /** 376 * Linked list of sockaddrs 377 * May be allocated such that only 'len' bytes of addr exist for the structure. 378 */ 379 struct sock_list { 380 /** next in list */ 381 struct sock_list* next; 382 /** length of addr */ 383 socklen_t len; 384 /** sockaddr */ 385 struct sockaddr_storage addr; 386 }; 387 388 /** 389 * Module state, per query. 390 */ 391 struct module_qstate { 392 /** which query is being answered: name, type, class */ 393 struct query_info qinfo; 394 /** flags uint16 from query */ 395 uint16_t query_flags; 396 /** if this is a (stub or root) priming query (with hints) */ 397 int is_priming; 398 399 /** comm_reply contains server replies */ 400 struct comm_reply* reply; 401 /** the reply message, with message for client and calling module */ 402 struct dns_msg* return_msg; 403 /** the rcode, in case of error, instead of a reply message */ 404 int return_rcode; 405 /** origin of the reply (can be NULL from cache, list for cnames) */ 406 struct sock_list* reply_origin; 407 /** IP blacklist for queries */ 408 struct sock_list* blacklist; 409 /** region for this query. Cleared when query process finishes. */ 410 struct regional* region; 411 /** failure reason information if val-log-level is high */ 412 struct config_strlist* errinf; 413 414 /** which module is executing */ 415 int curmod; 416 /** module states */ 417 enum module_ext_state ext_state[MAX_MODULE]; 418 /** module specific data for query. indexed by module id. */ 419 void* minfo[MAX_MODULE]; 420 /** environment for this query */ 421 struct module_env* env; 422 /** mesh related information for this query */ 423 struct mesh_state* mesh_info; 424 /** how many seconds before expiry is this prefetched (0 if not) */ 425 time_t prefetch_leeway; 426 }; 427 428 /** 429 * Module functionality block 430 */ 431 struct module_func_block { 432 /** text string name of module */ 433 const char* name; 434 435 /** 436 * init the module. Called once for the global state. 437 * This is the place to apply settings from the config file. 438 * @param env: module environment. 439 * @param id: module id number. 440 * return: 0 on error 441 */ 442 int (*init)(struct module_env* env, int id); 443 444 /** 445 * de-init, delete, the module. Called once for the global state. 446 * @param env: module environment. 447 * @param id: module id number. 448 */ 449 void (*deinit)(struct module_env* env, int id); 450 451 /** 452 * accept a new query, or work further on existing query. 453 * Changes the qstate->ext_state to be correct on exit. 454 * @param ev: event that causes the module state machine to 455 * (re-)activate. 456 * @param qstate: the query state. 457 * Note that this method is not allowed to change the 458 * query state 'identity', that is query info, qflags, 459 * and priming status. 460 * Attach a subquery to get results to a different query. 461 * @param id: module id number that operate() is called on. 462 * @param outbound: if not NULL this event is due to the reply/timeout 463 * or error on this outbound query. 464 * @return: if at exit the ext_state is: 465 * o wait_module: next module is started. (with pass event). 466 * o error or finished: previous module is resumed. 467 * o otherwise it waits until that event happens (assumes 468 * the service routine to make subrequest or send message 469 * have been called. 470 */ 471 void (*operate)(struct module_qstate* qstate, enum module_ev event, 472 int id, struct outbound_entry* outbound); 473 474 /** 475 * inform super querystate about the results from this subquerystate. 476 * Is called when the querystate is finished. The method invoked is 477 * the one from the current module active in the super querystate. 478 * @param qstate: the query state that is finished. 479 * Examine return_rcode and return_reply in the qstate. 480 * @param id: module id for this module. 481 * This coincides with the current module for the super qstate. 482 * @param super: the super querystate that needs to be informed. 483 */ 484 void (*inform_super)(struct module_qstate* qstate, int id, 485 struct module_qstate* super); 486 487 /** 488 * clear module specific data 489 */ 490 void (*clear)(struct module_qstate* qstate, int id); 491 492 /** 493 * How much memory is the module specific data using. 494 * @param env: module environment. 495 * @param id: the module id. 496 * @return the number of bytes that are alloced. 497 */ 498 size_t (*get_mem)(struct module_env* env, int id); 499 }; 500 501 /** 502 * Debug utility: module external qstate to string 503 * @param s: the state value. 504 * @return descriptive string. 505 */ 506 const char* strextstate(enum module_ext_state s); 507 508 /** 509 * Debug utility: module event to string 510 * @param e: the module event value. 511 * @return descriptive string. 512 */ 513 const char* strmodulevent(enum module_ev e); 514 515 #endif /* UTIL_MODULE_H */ 516