util/data/msgparse.h

/*
 * util/data/msgparse.h - parse wireformat DNS messages.
 *
 * Copyright (c) 2007, NLnet Labs. All rights reserved.
 *
 * This software is open source.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of the NLNET LABS nor the names of its contributors may
 * be used to endorse or promote products derived from this software without
 * specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
/**
 * \file
 * Contains message parsing data structures.
 * These point back into the packet buffer.
 *
 * During parsing RRSIGS are put together with the rrsets they (claim to) sign.
 * This process works as follows:
 *	o if RRSIG follows the data rrset, it is added to the rrset rrsig list.
 *	o if no matching data rrset is found, the RRSIG becomes a new rrset.
 *	o If the data rrset later follows the RRSIG
 *		o See if the RRSIG rrset contains multiple types, and needs to
 *		  have the rrsig(s) for that data type split off.
 *		o Put the data rr as data type in the rrset and rrsig in list.
 *	o RRSIGs are allowed to move to a different section. The section of
 *	  the data item is used for the final rrset.
 *	o multiple signatures over an RRset are possible.
 *
 * For queries of qtype=RRSIG, some special handling is needed, to avoid
 * splitting the RRSIG in the answer section.
 *	o duplicate, not split, RRSIGs from the answer section, if qtype=RRSIG.
 *	o check for doubles in the rrsig list when adding an RRSIG to data,
 *	  so that a data rrset is signed by RRSIGs with different rdata.
 *	  when qtype=RRSIG.
 * This will move the RRSIG from the answer section to sign the data further
 * in the packet (if possible). If then after that, more RRSIGs are found
 * that sign the data as well, doubles are removed.
 */

#ifndef UTIL_DATA_MSGPARSE_H
#define UTIL_DATA_MSGPARSE_H
#include "util/storage/lruhash.h"
#include "sldns/pkthdr.h"
#include "sldns/rrdef.h"
struct sldns_buffer;
struct rrset_parse;
struct rr_parse;
struct regional;
struct edns_option;
struct config_file;
struct comm_point;
struct comm_reply;

/** number of buckets in parse rrset hash table. Must be power of 2. */
#define PARSE_TABLE_SIZE 32
/** Maximum TTL that is allowed. */
extern time_t MAX_TTL;
/** Minimum TTL that is allowed. */
extern time_t MIN_TTL;
/** Maximum Negative TTL that is allowed */
extern time_t MAX_NEG_TTL;
/** If we serve expired entries and prefetch them */
extern int SERVE_EXPIRED;
/** Time to serve records after expiration */
extern time_t SERVE_EXPIRED_TTL;
/** TTL to use for expired records */
extern time_t SERVE_EXPIRED_REPLY_TTL;
/** Negative cache time (for entries without any RRs.) */
#define NORR_TTL 5 /* seconds */
/** If we serve the original TTL or decrementing TTLs */
extern int SERVE_ORIGINAL_TTL;

/**
 * Data stored in scratch pad memory during parsing.
 * Stores the data that will enter into the msgreply and packet result.
 */
struct msg_parse {
	/** id from message, network format. */
	uint16_t id;
	/** flags from message, host format. */
	uint16_t flags;
	/** count of RRs, host format */
	uint16_t qdcount;
	/** count of RRs, host format */
	uint16_t ancount;
	/** count of RRs, host format */
	uint16_t nscount;
	/** count of RRs, host format */
	uint16_t arcount;
	/** count of RRsets per section. */
	size_t an_rrsets;
	/** count of RRsets per section. */
	size_t ns_rrsets;
	/** count of RRsets per section. */
	size_t ar_rrsets;
	/** total number of rrsets found. */
	size_t rrset_count;

	/** query dname (pointer to start location in packet, NULL if none */
	uint8_t* qname;
	/** length of query dname in octets, 0 if none */
	size_t qname_len;
	/** query type, host order. 0 if qdcount=0 */
	uint16_t qtype;
	/** query class, host order. 0 if qdcount=0 */
	uint16_t qclass;

	/**
	 * Hash table array used during parsing to lookup rrset types.
	 * Based on name, type, class.  Same hash value as in rrset cache.
	 */
	struct rrset_parse* hashtable[PARSE_TABLE_SIZE];

	/** linked list of rrsets that have been found (in order). */
	struct rrset_parse* rrset_first;
	/** last element of rrset list. */
	struct rrset_parse* rrset_last;
};

/**
 * Data stored for an rrset during parsing.
 */
struct rrset_parse {
	/** next in hash bucket */
	struct rrset_parse* rrset_bucket_next;
	/** next in list of all rrsets */
	struct rrset_parse* rrset_all_next;
	/** hash value of rrset */
	hashvalue_type hash;
	/** which section was it found in: one of
	 * LDNS_SECTION_ANSWER, LDNS_SECTION_AUTHORITY, LDNS_SECTION_ADDITIONAL
	 */
	sldns_pkt_section section;
	/** start of (possibly compressed) dname in packet */
	uint8_t* dname;
	/** length of the dname uncompressed wireformat */
	size_t dname_len;
	/** type, host order. */
	uint16_t type;
	/** class, network order. var name so that it is not a c++ keyword. */
	uint16_t rrset_class;
	/** the flags for the rrset, like for packedrrset */
	uint32_t flags;
	/** number of RRs in the rr list */
	size_t rr_count;
	/** sum of RR rdata sizes */
	size_t size;
	/** linked list of RRs in this rrset. */
	struct rr_parse* rr_first;
	/** last in list of RRs in this rrset. */
	struct rr_parse* rr_last;
	/** number of RRSIGs over this rrset. */
	size_t rrsig_count;
	/** linked list of RRsig RRs over this rrset. */
	struct rr_parse* rrsig_first;
	/** last in list of RRSIG RRs over this rrset. */
	struct rr_parse* rrsig_last;
};

/**
 * Data stored for an RR during parsing.
 */
struct rr_parse {
	/**
	 * Pointer to the RR. Points to start of TTL value in the packet.
	 * Rdata length and rdata follow it.
	 * its dname, type and class are the same and stored for the rrset.
	 */
	uint8_t* ttl_data;
	/** true if ttl_data is not part of the packet, but elsewhere in mem.
	 * Set for generated CNAMEs for DNAMEs. */
	int outside_packet;
	/** the length of the rdata if allocated (with no dname compression)*/
	size_t size;
	/** next in list of RRs. */
	struct rr_parse* next;
};

/** Check if label length is first octet of a compression pointer, pass u8. */
#define LABEL_IS_PTR(x) ( ((x)&0xc0) == 0xc0 )
/** Calculate destination offset of a compression pointer. pass first and
 * second octets of the compression pointer. */
#define PTR_OFFSET(x, y) ( ((x)&0x3f)<<8 | (y) )
/** create a compression pointer to the given offset. */
#define PTR_CREATE(offset) ((uint16_t)(0xc000 | (offset)))

/** error codes, extended with EDNS, so > 15. */
#define EDNS_RCODE_BADVERS	16	/** bad EDNS version */
/** largest valid compression offset */
#define PTR_MAX_OFFSET 	0x3fff

/**
 * EDNS data storage
 * rdata is parsed in a list (has accessor functions). allocated in a
 * region.
 */
struct edns_data {
	/** Extended RCODE */
	uint8_t ext_rcode;
	/** The EDNS version number */
	uint8_t edns_version;
	/** the EDNS bits field from ttl (host order): Z */
	uint16_t bits;
	/** UDP reassembly size. */
	uint16_t udp_size;
	/** rdata element list of options of an incoming packet created at
	 * parse time, or NULL if none */
	struct edns_option* opt_list_in;
	/** rdata element list of options to encode for outgoing packets,
	 * or NULL if none */
	struct edns_option* opt_list_out;
	/** rdata element list of outgoing edns options from modules
	 * or NULL if none */
	struct edns_option* opt_list_inplace_cb_out;
	/** block size to pad */
	uint16_t padding_block_size;
	/** if EDNS OPT record was present */
	unsigned int edns_present   : 1;
	/** if a cookie was present */
	unsigned int cookie_present : 1;
	/** if the cookie validated */
	unsigned int cookie_valid   : 1;
	/** if the cookie holds only the client part */
	unsigned int cookie_client  : 1;
};

/**
 * EDNS option
 */
struct edns_option {
	/** next item in list */
	struct edns_option* next;
	/** type of this edns option */
	uint16_t opt_code;
	/** length of this edns option (cannot exceed uint16 in encoding) */
	size_t opt_len;
	/** data of this edns option; allocated in region, or NULL if len=0 */
	uint8_t* opt_data;
};

/**
 * Obtain size in the packet of an rr type, that is before dname type.
 * Do TYPE_DNAME, and type STR, yourself. Gives size for most regular types.
 * @param rdf: the rdf type from the descriptor.
 * @return: size in octets. 0 on failure.
 */
size_t get_rdf_size(sldns_rdf_type rdf);

/**
 * Parse the packet.
 * @param pkt: packet, position at call must be at start of packet.
 *	at end position is after packet.
 * @param msg: where to store results.
 * @param region: how to alloc results.
 * @return: 0 if OK, or rcode on error.
 */
int parse_packet(struct sldns_buffer* pkt, struct msg_parse* msg,
	struct regional* region);

/**
 * After parsing the packet, extract EDNS data from packet.
 * If not present this is noted in the data structure.
 * If a parse error happens, an error code is returned.
 *
 * Quirks:
 *	o ignores OPT rdata.
 *	o ignores OPT owner name.
 *	o ignores extra OPT records, except the last one in the packet.
 *
 * @param msg: parsed message structure. Modified on exit, if EDNS was present
 * 	it is removed from the additional section.
 * @param edns: the edns data is stored here. Does not have to be initialised.
 * @param region: region to alloc results in (edns option contents)
 * @return: 0 on success. or an RCODE on an error.
 *	RCODE formerr if OPT in wrong section, and so on.
 */
int parse_extract_edns_from_response_msg(struct msg_parse* msg,
	struct edns_data* edns, struct regional* region);

/**
 * Skip RRs from packet
 * @param pkt: the packet. position at start must be right after the query
 *	section. At end, right after EDNS data or no movement if failed.
 * @param num: Limit of the number of records we want to parse.
 * @return: 0 on success, 1 on failure.
 */
int skip_pkt_rrs(struct sldns_buffer* pkt, int num);

/**
 * If EDNS data follows a query section, extract it and initialize edns struct.
 * @param pkt: the packet. position at start must be right after the query
 *	section. At end, right after EDNS data or no movement if failed.
 * @param edns: the edns data allocated by the caller. Does not have to be
 *	initialised.
 * @param cfg: the configuration (with nsid value etc.)
 * @param c: commpoint to determine transport (if needed)
 * @param repinfo: commreply to determine the client address
 * @param now: current time
 * @param region: region to alloc results in (edns option contents)
 * @return: 0 on success, or an RCODE on error.
 *	RCODE formerr if OPT is badly formatted and so on.
 */
int parse_edns_from_query_pkt(struct sldns_buffer* pkt, struct edns_data* edns,
	struct config_file* cfg, struct comm_point* c,
	struct comm_reply* repinfo, time_t now, struct regional* region);

/**
 * Calculate hash value for rrset in packet.
 * @param pkt: the packet.
 * @param dname: pointer to uncompressed dname, or compressed dname in packet.
 * @param type: rrset type in host order.
 * @param dclass: rrset class in network order.
 * @param rrset_flags: rrset flags (same as packed_rrset flags).
 * @return hash value
 */
hashvalue_type pkt_hash_rrset(struct sldns_buffer* pkt, uint8_t* dname,
	uint16_t type, uint16_t dclass, uint32_t rrset_flags);

/**
 * Lookup in msg hashtable to find a rrset.
 * @param msg: with the hashtable.
 * @param pkt: packet for compressed names.
 * @param h: hash value
 * @param rrset_flags: flags of rrset sought for.
 * @param dname: name of rrset sought for.
 * @param dnamelen: len of dname.
 * @param type: rrset type, host order.
 * @param dclass: rrset class, network order.
 * @return NULL or the rrset_parse if found.
 */
struct rrset_parse* msgparse_hashtable_lookup(struct msg_parse* msg,
	struct sldns_buffer* pkt, hashvalue_type h, uint32_t rrset_flags,
	uint8_t* dname, size_t dnamelen, uint16_t type, uint16_t dclass);

/**
 * Remove rrset from hash table.
 * @param msg: with hashtable.
 * @param rrset: with hash value and id info.
 */
void msgparse_bucket_remove(struct msg_parse* msg, struct rrset_parse* rrset);

/**
 * Log the edns options in the edns option list.
 * @param level: the verbosity level.
 * @param info_str: the informational string to be printed before the options.
 * @param list: the edns option list.
 */
void log_edns_opt_list(enum verbosity_value level, const char* info_str,
	struct edns_option* list);

/**
 * Remove RR from msgparse RRset.
 * @param str: this string is used for logging if verbose. If NULL, there is
 *	no logging of the remove.
 * @param pkt: packet in buffer that is removed from. Used to log the name
 * 	of the item removed.
 * @param rrset: RRset that the RR is removed from.
 * @param prev: previous RR in list, or NULL.
 * @param rr: RR that is removed.
 * @param addr: address used for logging, if verbose, or NULL then it is not
 *	used.
 * @param addrlen: length of addr, if that is not NULL.
 * @return true if rrset is entirely bad, it would then need to be removed.
 */
int msgparse_rrset_remove_rr(const char* str, struct sldns_buffer* pkt,
	struct rrset_parse* rrset, struct rr_parse* prev, struct rr_parse* rr,
	struct sockaddr_storage* addr, socklen_t addrlen);

#endif /* UTIL_DATA_MSGPARSE_H */