unbound/daemon/unbound.c

/*
 * daemon/unbound.c - main program for unbound DNS resolver daemon.
 *
 * Copyright (c) 2007, NLnet Labs. All rights reserved.
 *
 * This software is open source.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the following disclaimer.
 *
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 *
 * Neither the name of the NLNET LABS nor the names of its contributors may
 * be used to endorse or promote products derived from this software without
 * specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

/**
 * \file
 *
 * Main program to start the DNS resolver daemon.
 */

#include "config.h"
#ifdef HAVE_GETOPT_H
#include <getopt.h>
#endif
#include <sys/time.h>
#include "util/log.h"
#include "daemon/daemon.h"
#include "daemon/remote.h"
#include "util/config_file.h"
#include "util/storage/slabhash.h"
#include "services/listen_dnsport.h"
#include "services/cache/rrset.h"
#include "services/cache/infra.h"
#include "util/fptr_wlist.h"
#include "util/data/msgreply.h"
#include "util/module.h"
#include "util/net_help.h"
#include "util/ub_event.h"
#include <signal.h>
#include <fcntl.h>
#include <openssl/crypto.h>
#ifdef HAVE_PWD_H
#include <pwd.h>
#endif
#ifdef HAVE_GRP_H
#include <grp.h>
#endif

#ifndef S_SPLINT_S
/* splint chokes on this system header file */
#ifdef HAVE_SYS_RESOURCE_H
#include <sys/resource.h>
#endif
#endif /* S_SPLINT_S */
#ifdef HAVE_LOGIN_CAP_H
#include <login_cap.h>
#endif

#ifdef UB_ON_WINDOWS
#  include "winrc/win_svc.h"
#endif

#ifdef HAVE_NSS
/* nss3 */
#  include "nss.h"
#endif

/** print usage. */
static void usage(void)
{
	const char** m;
	const char *evnm="event", *evsys="", *evmethod="";
	time_t t;
	struct timeval now;
	struct ub_event_base* base;
	printf("usage:  local-unbound [options]\n");
	printf("	start unbound daemon DNS resolver.\n");
	printf("-h	this help\n");
	printf("-c file	config file to read instead of %s\n", CONFIGFILE);
	printf("	file format is described in unbound.conf(5).\n");
	printf("-d	do not fork into the background.\n");
	printf("-p	do not create a pidfile.\n");
	printf("-v	verbose (more times to increase verbosity)\n");
#ifdef UB_ON_WINDOWS
	printf("-w opt	windows option: \n");
	printf("   	install, remove - manage the services entry\n");
	printf("   	service - used to start from services control panel\n");
#endif
	printf("Version %s\n", PACKAGE_VERSION);
	base = ub_default_event_base(0,&t,&now);
	ub_get_event_sys(base, &evnm, &evsys, &evmethod);
	printf("linked libs: %s %s (it uses %s), %s\n",
		evnm, evsys, evmethod,
#ifdef HAVE_SSL
#  ifdef SSLEAY_VERSION
		SSLeay_version(SSLEAY_VERSION)
#  else
		OpenSSL_version(OPENSSL_VERSION)
#  endif
#elif defined(HAVE_NSS)
		NSS_GetVersion()
#elif defined(HAVE_NETTLE)
		"nettle"
#endif
		);
	printf("linked modules:");
	for(m = module_list_avail(); *m; m++)
		printf(" %s", *m);
	printf("\n");
#ifdef USE_DNSCRYPT
	printf("DNSCrypt feature available\n");
#endif
	printf("BSD licensed, see LICENSE in source package for details.\n");
	printf("Report bugs to %s\n", PACKAGE_BUGREPORT);
	ub_event_base_free(base);
}

#ifndef unbound_testbound
int replay_var_compare(const void* ATTR_UNUSED(a), const void* ATTR_UNUSED(b))
{
        log_assert(0);
        return 0;
}
#endif

/** check file descriptor count */
static void
checkrlimits(struct config_file* cfg)
{
#ifndef S_SPLINT_S
#ifdef HAVE_GETRLIMIT
	/* list has number of ports to listen to, ifs number addresses */
	int list = ((cfg->do_udp?1:0) + (cfg->do_tcp?1 +
			(int)cfg->incoming_num_tcp:0));
	size_t listen_ifs = (size_t)(cfg->num_ifs==0?
		((cfg->do_ip4 && !cfg->if_automatic?1:0) +
		 (cfg->do_ip6?1:0)):cfg->num_ifs);
	size_t listen_num = list*listen_ifs;
	size_t outudpnum = (size_t)cfg->outgoing_num_ports;
	size_t outtcpnum = cfg->outgoing_num_tcp;
	size_t misc = 4; /* logfile, pidfile, stdout... */
	size_t perthread_noudp = listen_num + outtcpnum +
		2/*cmdpipe*/ + 2/*libevent*/ + misc;
	size_t perthread = perthread_noudp + outudpnum;

#if !defined(HAVE_PTHREAD) && !defined(HAVE_SOLARIS_THREADS)
	int numthread = 1; /* it forks */
#else
	int numthread = (cfg->num_threads?cfg->num_threads:1);
#endif
	size_t total = numthread * perthread + misc;
	size_t avail;
	struct rlimit rlim;

	if(total > 1024 &&
		strncmp(ub_event_get_version(), "mini-event", 10) == 0) {
		log_warn("too many file descriptors requested. The builtin"
			"mini-event cannot handle more than 1024. Config "
			"for less fds or compile with libevent");
		if(numthread*perthread_noudp+15 > 1024)
			fatal_exit("too much tcp. not enough fds.");
		cfg->outgoing_num_ports = (int)((1024
			- numthread*perthread_noudp
			- 10 /* safety margin */) /numthread);
		log_warn("continuing with less udp ports: %u",
			cfg->outgoing_num_ports);
		total = 1024;
	}
	if(perthread > 64 &&
		strncmp(ub_event_get_version(), "winsock-event", 13) == 0) {
		log_err("too many file descriptors requested. The winsock"
			" event handler cannot handle more than 64 per "
			" thread. Config for less fds");
		if(perthread_noudp+2 > 64)
			fatal_exit("too much tcp. not enough fds.");
		cfg->outgoing_num_ports = (int)((64
			- perthread_noudp
			- 2/* safety margin */));
		log_warn("continuing with less udp ports: %u",
			cfg->outgoing_num_ports);
		total = numthread*(perthread_noudp+
			(size_t)cfg->outgoing_num_ports)+misc;
	}
	if(getrlimit(RLIMIT_NOFILE, &rlim) < 0) {
		log_warn("getrlimit: %s", strerror(errno));
		return;
	}
	if(rlim.rlim_cur == (rlim_t)RLIM_INFINITY)
		return;
	if((size_t)rlim.rlim_cur < total) {
		avail = (size_t)rlim.rlim_cur;
		rlim.rlim_cur = (rlim_t)(total + 10);
		rlim.rlim_max = (rlim_t)(total + 10);
#ifdef HAVE_SETRLIMIT
		if(setrlimit(RLIMIT_NOFILE, &rlim) < 0) {
			log_warn("setrlimit: %s", strerror(errno));
#endif
			log_warn("cannot increase max open fds from %u to %u",
				(unsigned)avail, (unsigned)total+10);
			/* check that calculation below does not underflow,
			 * with 15 as margin */
			if(numthread*perthread_noudp+15 > avail)
				fatal_exit("too much tcp. not enough fds.");
			cfg->outgoing_num_ports = (int)((avail
				- numthread*perthread_noudp
				- 10 /* safety margin */) /numthread);
			log_warn("continuing with less udp ports: %u",
				cfg->outgoing_num_ports);
			log_warn("increase ulimit or decrease threads, "
				"ports in config to remove this warning");
			return;
#ifdef HAVE_SETRLIMIT
		}
#endif
		verbose(VERB_ALGO, "increased limit(open files) from %u to %u",
			(unsigned)avail, (unsigned)total+10);
	}
#else
	(void)cfg;
#endif /* HAVE_GETRLIMIT */
#endif /* S_SPLINT_S */
}

/** set default logfile identity based on value from argv[0] at startup **/
static void
log_ident_set_fromdefault(struct config_file* cfg,
	const char *log_default_identity)
{
	if(cfg->log_identity == NULL || cfg->log_identity[0] == 0)
		log_ident_set(log_default_identity);
	else
		log_ident_set(cfg->log_identity);
}

/** set verbosity, check rlimits, cache settings */
static void
apply_settings(struct daemon* daemon, struct config_file* cfg,
	int cmdline_verbose, int debug_mode, const char* log_default_identity)
{
	/* apply if they have changed */
	verbosity = cmdline_verbose + cfg->verbosity;
	if (debug_mode > 1) {
		cfg->use_syslog = 0;
		free(cfg->logfile);
		cfg->logfile = NULL;
	}
	daemon_apply_cfg(daemon, cfg);
	checkrlimits(cfg);

	if (cfg->use_systemd && cfg->do_daemonize) {
		log_warn("use-systemd and do-daemonize should not be enabled at the same time");
	}

	log_ident_set_fromdefault(cfg, log_default_identity);
}

#ifdef HAVE_KILL
/** Read existing pid from pidfile.
 * @param file: file name of pid file.
 * @return: the pid from the file or -1 if none.
 */
static pid_t
readpid (const char* file)
{
	int fd;
	pid_t pid;
	char pidbuf[32];
	char* t;
	ssize_t l;

	if ((fd = open(file, O_RDONLY)) == -1) {
		if(errno != ENOENT)
			log_err("Could not read pidfile %s: %s",
				file, strerror(errno));
		return -1;
	}

	if (((l = read(fd, pidbuf, sizeof(pidbuf)))) == -1) {
		if(errno != ENOENT)
			log_err("Could not read pidfile %s: %s",
				file, strerror(errno));
		close(fd);
		return -1;
	}

	close(fd);

	/* Empty pidfile means no pidfile... */
	if (l == 0) {
		return -1;
	}

	pidbuf[sizeof(pidbuf)-1] = 0;
	pid = (pid_t)strtol(pidbuf, &t, 10);

	if (*t && *t != '\n') {
		return -1;
	}
	return pid;
}

/** write pid to file.
 * @param pidfile: file name of pid file.
 * @param pid: pid to write to file.
 */
static void
writepid (const char* pidfile, pid_t pid)
{
	FILE* f;

	if ((f = fopen(pidfile, "w")) ==  NULL ) {
		log_err("cannot open pidfile %s: %s",
			pidfile, strerror(errno));
		return;
	}
	if(fprintf(f, "%lu\n", (unsigned long)pid) < 0) {
		log_err("cannot write to pidfile %s: %s",
			pidfile, strerror(errno));
	}
	fclose(f);
}

/**
 * check old pid file.
 * @param pidfile: the file name of the pid file.
 * @param inchroot: if pidfile is inchroot and we can thus expect to
 *	be able to delete it.
 */
static void
checkoldpid(char* pidfile, int inchroot)
{
	pid_t old;
	if((old = readpid(pidfile)) != -1) {
		/* see if it is still alive */
		if(kill(old, 0) == 0 || errno == EPERM)
			log_warn("unbound is already running as pid %u.",
				(unsigned)old);
		else	if(inchroot)
			log_warn("did not exit gracefully last time (%u)",
				(unsigned)old);
	}
}
#endif /* HAVE_KILL */

/** detach from command line */
static void
detach(void)
{
#if defined(HAVE_DAEMON) && !defined(DEPRECATED_DAEMON)
	/* use POSIX daemon(3) function */
	if(daemon(1, 0) != 0)
		fatal_exit("daemon failed: %s", strerror(errno));
#else /* no HAVE_DAEMON */
#ifdef HAVE_FORK
	int fd;
	/* Take off... */
	switch (fork()) {
		case 0:
			break;
		case -1:
			fatal_exit("fork failed: %s", strerror(errno));
		default:
			/* exit interactive session */
			exit(0);
	}
	/* detach */
#ifdef HAVE_SETSID
	if(setsid() == -1)
		fatal_exit("setsid() failed: %s", strerror(errno));
#endif
	if ((fd = open("/dev/null", O_RDWR, 0)) != -1) {
		(void)dup2(fd, STDIN_FILENO);
		(void)dup2(fd, STDOUT_FILENO);
		(void)dup2(fd, STDERR_FILENO);
		if (fd > 2)
			(void)close(fd);
	}
#endif /* HAVE_FORK */
#endif /* HAVE_DAEMON */
}

/** daemonize, drop user privileges and chroot if needed */
static void
perform_setup(struct daemon* daemon, struct config_file* cfg, int debug_mode,
	const char** cfgfile, int need_pidfile)
{
#ifdef HAVE_KILL
	int pidinchroot;
#endif
#ifdef HAVE_GETPWNAM
	struct passwd *pwd = NULL;

	if(cfg->username && cfg->username[0]) {
		if((pwd = getpwnam(cfg->username)) == NULL)
			fatal_exit("user '%s' does not exist.", cfg->username);
		/* endpwent below, in case we need pwd for setusercontext */
	}
#endif
#ifdef UB_ON_WINDOWS
	w_config_adjust_directory(cfg);
#endif

	/* read ssl keys while superuser and outside chroot */
#ifdef HAVE_SSL
	if(!(daemon->rc = daemon_remote_create(cfg)))
		fatal_exit("could not set up remote-control");
	if(cfg->ssl_service_key && cfg->ssl_service_key[0]) {
		if(!(daemon->listen_sslctx = listen_sslctx_create(
			cfg->ssl_service_key, cfg->ssl_service_pem, NULL)))
			fatal_exit("could not set up listen SSL_CTX");
	}
	if(!(daemon->connect_sslctx = connect_sslctx_create(NULL, NULL,
		cfg->tls_cert_bundle, cfg->tls_win_cert)))
		fatal_exit("could not set up connect SSL_CTX");
#endif

	/* init syslog (as root) if needed, before daemonize, otherwise
	 * a fork error could not be printed since daemonize closed stderr.*/
	if(cfg->use_syslog) {
		log_init(cfg->logfile, cfg->use_syslog, cfg->chrootdir);
	}
	/* if using a logfile, we cannot open it because the logfile would
	 * be created with the wrong permissions, we cannot chown it because
	 * we cannot chown system logfiles, so we do not open at all.
	 * So, using a logfile, the user does not see errors unless -d is
	 * given to unbound on the commandline. */

#ifdef HAVE_KILL
	/* true if pidfile is inside chrootdir, or nochroot */
	pidinchroot = need_pidfile && (!(cfg->chrootdir && cfg->chrootdir[0]) ||
				(cfg->chrootdir && cfg->chrootdir[0] &&
				strncmp(cfg->pidfile, cfg->chrootdir,
				strlen(cfg->chrootdir))==0));

	/* check old pid file before forking */
	if(cfg->pidfile && cfg->pidfile[0] && need_pidfile) {
		/* calculate position of pidfile */
		if(cfg->pidfile[0] == '/')
			daemon->pidfile = strdup(cfg->pidfile);
		else	daemon->pidfile = fname_after_chroot(cfg->pidfile,
				cfg, 1);
		if(!daemon->pidfile)
			fatal_exit("pidfile alloc: out of memory");
		checkoldpid(daemon->pidfile, pidinchroot);
	}
#endif

	/* daemonize because pid is needed by the writepid func */
	if(!debug_mode && cfg->do_daemonize) {
		detach();
	}

	/* write new pidfile (while still root, so can be outside chroot) */
#ifdef HAVE_KILL
	if(cfg->pidfile && cfg->pidfile[0] && need_pidfile) {
		writepid(daemon->pidfile, getpid());
		if(cfg->username && cfg->username[0] && cfg_uid != (uid_t)-1 &&
			pidinchroot) {
#  ifdef HAVE_CHOWN
			if(chown(daemon->pidfile, cfg_uid, cfg_gid) == -1) {
				verbose(VERB_QUERY, "cannot chown %u.%u %s: %s",
					(unsigned)cfg_uid, (unsigned)cfg_gid,
					daemon->pidfile, strerror(errno));
			}
#  endif /* HAVE_CHOWN */
		}
	}
#else
	(void)daemon;
	(void)need_pidfile;
#endif /* HAVE_KILL */

	/* Set user context */
#ifdef HAVE_GETPWNAM
	if(cfg->username && cfg->username[0] && cfg_uid != (uid_t)-1) {
#ifdef HAVE_SETUSERCONTEXT
		/* setusercontext does initgroups, setuid, setgid, and
		 * also resource limits from login config, but we
		 * still call setresuid, setresgid to be sure to set all uid*/
		if(setusercontext(NULL, pwd, cfg_uid, (unsigned)
			LOGIN_SETALL & ~LOGIN_SETUSER & ~LOGIN_SETGROUP) != 0)
			log_warn("unable to setusercontext %s: %s",
				cfg->username, strerror(errno));
#endif /* HAVE_SETUSERCONTEXT */
	}
#endif /* HAVE_GETPWNAM */

	/* box into the chroot */
#ifdef HAVE_CHROOT
	if(cfg->chrootdir && cfg->chrootdir[0]) {
		if(chdir(cfg->chrootdir)) {
			fatal_exit("unable to chdir to chroot %s: %s",
				cfg->chrootdir, strerror(errno));
		}
		verbose(VERB_QUERY, "chdir to %s", cfg->chrootdir);
		if(chroot(cfg->chrootdir))
			fatal_exit("unable to chroot to %s: %s",
				cfg->chrootdir, strerror(errno));
		if(chdir("/"))
			fatal_exit("unable to chdir to / in chroot %s: %s",
				cfg->chrootdir, strerror(errno));
		verbose(VERB_QUERY, "chroot to %s", cfg->chrootdir);
		if(strncmp(*cfgfile, cfg->chrootdir,
			strlen(cfg->chrootdir)) == 0)
			(*cfgfile) += strlen(cfg->chrootdir);

		/* adjust stored pidfile for chroot */
		if(daemon->pidfile && daemon->pidfile[0] &&
			strncmp(daemon->pidfile, cfg->chrootdir,
			strlen(cfg->chrootdir))==0) {
			char* old = daemon->pidfile;
			daemon->pidfile = strdup(old+strlen(cfg->chrootdir));
			free(old);
			if(!daemon->pidfile)
				log_err("out of memory in pidfile adjust");
		}
		daemon->chroot = strdup(cfg->chrootdir);
		if(!daemon->chroot)
			log_err("out of memory in daemon chroot dir storage");
	}
#else
	(void)cfgfile;
#endif
	/* change to working directory inside chroot */
	if(cfg->directory && cfg->directory[0]) {
		char* dir = cfg->directory;
		if(cfg->chrootdir && cfg->chrootdir[0] &&
			strncmp(dir, cfg->chrootdir,
			strlen(cfg->chrootdir)) == 0)
			dir += strlen(cfg->chrootdir);
		if(dir[0]) {
			if(chdir(dir)) {
				fatal_exit("Could not chdir to %s: %s",
					dir, strerror(errno));
			}
			verbose(VERB_QUERY, "chdir to %s", dir);
		}
	}

	/* drop permissions after chroot, getpwnam, pidfile, syslog done*/
#ifdef HAVE_GETPWNAM
	if(cfg->username && cfg->username[0] && cfg_uid != (uid_t)-1) {
#  ifdef HAVE_INITGROUPS
		if(initgroups(cfg->username, cfg_gid) != 0)
			log_warn("unable to initgroups %s: %s",
				cfg->username, strerror(errno));
#  endif /* HAVE_INITGROUPS */
#  ifdef HAVE_ENDPWENT
		endpwent();
#  endif

#ifdef HAVE_SETRESGID
		if(setresgid(cfg_gid,cfg_gid,cfg_gid) != 0)
#elif defined(HAVE_SETREGID) && !defined(DARWIN_BROKEN_SETREUID)
		if(setregid(cfg_gid,cfg_gid) != 0)
#else /* use setgid */
		if(setgid(cfg_gid) != 0)
#endif /* HAVE_SETRESGID */
			fatal_exit("unable to set group id of %s: %s",
				cfg->username, strerror(errno));
#ifdef HAVE_SETRESUID
		if(setresuid(cfg_uid,cfg_uid,cfg_uid) != 0)
#elif defined(HAVE_SETREUID) && !defined(DARWIN_BROKEN_SETREUID)
		if(setreuid(cfg_uid,cfg_uid) != 0)
#else /* use setuid */
		if(setuid(cfg_uid) != 0)
#endif /* HAVE_SETRESUID */
			fatal_exit("unable to set user id of %s: %s",
				cfg->username, strerror(errno));
		verbose(VERB_QUERY, "drop user privileges, run as %s",
			cfg->username);
	}
#endif /* HAVE_GETPWNAM */
	/* file logging inited after chroot,chdir,setuid is done so that
	 * it would succeed on SIGHUP as well */
	if(!cfg->use_syslog)
		log_init(cfg->logfile, cfg->use_syslog, cfg->chrootdir);
}

/**
 * Run the daemon.
 * @param cfgfile: the config file name.
 * @param cmdline_verbose: verbosity resulting from commandline -v.
 *    These increase verbosity as specified in the config file.
 * @param debug_mode: if set, do not daemonize.
 * @param log_default_identity: Default identity to report in logs
 * @param need_pidfile: if false, no pidfile is checked or created.
 */
static void
run_daemon(const char* cfgfile, int cmdline_verbose, int debug_mode, const char* log_default_identity, int need_pidfile)
{
	struct config_file* cfg = NULL;
	struct daemon* daemon = NULL;
	int done_setup = 0;

	if(!(daemon = daemon_init()))
		fatal_exit("alloc failure");
	while(!daemon->need_to_exit) {
		if(done_setup)
			verbose(VERB_OPS, "Restart of %s.", PACKAGE_STRING);
		else	verbose(VERB_OPS, "Start of %s.", PACKAGE_STRING);

		/* config stuff */
		if(!(cfg = config_create()))
			fatal_exit("Could not alloc config defaults");
		if(!config_read(cfg, cfgfile, daemon->chroot)) {
			if(errno != ENOENT)
				fatal_exit("Could not read config file: %s."
					" Maybe try unbound -dd, it stays on "
					"the commandline to see more errors, "
					"or unbound-checkconf", cfgfile);
			log_warn("Continuing with default config settings");
		}
		apply_settings(daemon, cfg, cmdline_verbose, debug_mode, log_default_identity);
		if(!done_setup)
			config_lookup_uid(cfg);

		/* prepare */
		if(!daemon_open_shared_ports(daemon))
			fatal_exit("could not open ports");
		if(!done_setup) {
			perform_setup(daemon, cfg, debug_mode, &cfgfile, need_pidfile);
			done_setup = 1;
		} else {
			/* reopen log after HUP to facilitate log rotation */
			if(!cfg->use_syslog)
				log_init(cfg->logfile, 0, cfg->chrootdir);
		}
		/* work */
		daemon_fork(daemon);

		/* clean up for restart */
		verbose(VERB_ALGO, "cleanup.");
		daemon_cleanup(daemon);
		config_delete(cfg);
	}
	verbose(VERB_ALGO, "Exit cleanup.");
	/* this unlink may not work if the pidfile is located outside
	 * of the chroot/workdir or we no longer have permissions */
	if(daemon->pidfile) {
		int fd;
		/* truncate pidfile */
		fd = open(daemon->pidfile, O_WRONLY | O_TRUNC, 0644);
		if(fd != -1)
			close(fd);
		/* delete pidfile */
		unlink(daemon->pidfile);
	}
	daemon_delete(daemon);
}

/** getopt global, in case header files fail to declare it. */
extern int optind;
/** getopt global, in case header files fail to declare it. */
extern char* optarg;

/**
 * main program. Set options given commandline arguments.
 * @param argc: number of commandline arguments.
 * @param argv: array of commandline arguments.
 * @return: exit status of the program.
 */
int
main(int argc, char* argv[])
{
	int c;
	const char* cfgfile = CONFIGFILE;
	const char* winopt = NULL;
	const char* log_ident_default;
	int cmdline_verbose = 0;
	int debug_mode = 0;
	int need_pidfile = 1;

#ifdef UB_ON_WINDOWS
	int cmdline_cfg = 0;
#endif

	log_init(NULL, 0, NULL);
	log_ident_default = strrchr(argv[0],'/')?strrchr(argv[0],'/')+1:argv[0];
	log_ident_set(log_ident_default);
	/* parse the options */
	while( (c=getopt(argc, argv, "c:dhpvw:")) != -1) {
		switch(c) {
		case 'c':
			cfgfile = optarg;
#ifdef UB_ON_WINDOWS
			cmdline_cfg = 1;
#endif
			break;
		case 'v':
			cmdline_verbose++;
			verbosity++;
			break;
		case 'p':
			need_pidfile = 0;
			break;
		case 'd':
			debug_mode++;
			break;
		case 'w':
			winopt = optarg;
			break;
		case '?':
		case 'h':
		default:
			usage();
			return 1;
		}
	}
	argc -= optind;
	/* argv += optind; not using further arguments */

	if(winopt) {
#ifdef UB_ON_WINDOWS
		wsvc_command_option(winopt, cfgfile, cmdline_verbose,
			cmdline_cfg);
#else
		fatal_exit("option not supported");
#endif
	}

	if(argc != 0) {
		usage();
		return 1;
	}

	run_daemon(cfgfile, cmdline_verbose, debug_mode, log_ident_default, need_pidfile);
	log_init(NULL, 0, NULL); /* close logfile */
#ifndef unbound_testbound
	if(log_get_lock()) {
		lock_quick_destroy((lock_quick_type*)log_get_lock());
	}
#endif
	return 0;
}