xref: /freebsd/contrib/tcpdump/print-zeromq.c (revision 7431dfd4580e850375fe5478d92ec770344db098)
1 /*
2  * This file implements decoding of ZeroMQ network protocol(s).
3  *
4  *
5  * Copyright (c) 2013 The TCPDUMP project
6  * All rights reserved.
7  *
8  * Redistribution and use in source and binary forms, with or without
9  * modification, are permitted provided that the following conditions
10  * are met:
11  * 1. Redistributions of source code must retain the above copyright
12  *    notice, this list of conditions and the following disclaimer.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21  * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
23  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
24  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
27  * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28  * POSSIBILITY OF SUCH DAMAGE.
29  */
30 
31 #ifdef HAVE_CONFIG_H
32 #include "config.h"
33 #endif
34 
35 #include <tcpdump-stdinc.h>
36 
37 #include <stdio.h>
38 
39 #include "interface.h"
40 #include "extract.h"
41 
42 /* Maximum number of ZMTP/1.0 frame body bytes (without the flags) to dump in
43  * hex and ASCII under a single "-v" flag.
44  */
45 #define VBYTES 128
46 
47 /*
48  * Below is an excerpt from the "13/ZMTP" specification:
49  *
50  * A ZMTP message consists of 1 or more frames.
51  *
52  * A ZMTP frame consists of a length, followed by a flags field and a frame
53  * body of (length - 1) octets. Note: the length includes the flags field, so
54  * an empty frame has a length of 1.
55  *
56  * For frames with a length of 1 to 254 octets, the length SHOULD BE encoded
57  * as a single octet. The minimum valid length of a frame is 1 octet, thus a
58  * length of 0 is invalid and such frames SHOULD be discarded silently.
59  *
60  * For frames with lengths of 255 and greater, the length SHALL BE encoded as
61  * a single octet with the value 255, followed by the length encoded as a
62  * 64-bit unsigned integer in network byte order. For frames with lengths of
63  * 1 to 254 octets this encoding MAY be also used.
64  *
65  * The flags field consists of a single octet containing various control
66  * flags. Bit 0 is the least significant bit.
67  *
68  * - Bit 0 (MORE): More frames to follow. A value of 0 indicates that there
69  *   are no more frames to follow. A value of 1 indicates that more frames
70  *   will follow. On messages consisting of a single frame the MORE flag MUST
71  *   be 0.
72  *
73  * - Bits 1-7: Reserved. Bits 1-7 are reserved for future use and SHOULD be
74  *   zero.
75  */
76 
77 static const u_char *
78 zmtp1_print_frame(const u_char *cp, const u_char *ep) {
79 	u_int64_t body_len_declared, body_len_captured, header_len;
80 	u_int8_t flags;
81 
82 	printf("\n\t");
83 	TCHECK2(*cp, 1); /* length/0xFF */
84 
85 	if (cp[0] != 0xFF) {
86 		header_len = 1; /* length */
87 		body_len_declared = cp[0];
88 		if (body_len_declared == 0)
89 			return cp + header_len; /* skip to next frame */
90 		printf(" frame flags+body  (8-bit) length %"PRIu8"", cp[0]);
91 		TCHECK2(*cp, header_len + 1); /* length, flags */
92 		flags = cp[1];
93 	} else {
94 		header_len = 1 + 8; /* 0xFF, length */
95 		printf(" frame flags+body (64-bit) length");
96 		TCHECK2(*cp, header_len); /* 0xFF, length */
97 		body_len_declared = EXTRACT_64BITS(cp + 1);
98 		if (body_len_declared == 0)
99 			return cp + header_len; /* skip to next frame */
100 		printf(" %"PRIu64"", body_len_declared);
101 		TCHECK2(*cp, header_len + 1); /* 0xFF, length, flags */
102 		flags = cp[9];
103 	}
104 
105 	body_len_captured = ep - cp - header_len;
106 	if (body_len_declared > body_len_captured)
107 		printf(" (%"PRIu64" captured)", body_len_captured);
108 	printf(", flags 0x%02"PRIx8"", flags);
109 
110 	if (vflag) {
111 		u_int64_t body_len_printed = MIN(body_len_captured, body_len_declared);
112 
113 		printf(" (%s|%s|%s|%s|%s|%s|%s|%s)",
114 			flags & 0x80 ? "MBZ" : "-",
115 			flags & 0x40 ? "MBZ" : "-",
116 			flags & 0x20 ? "MBZ" : "-",
117 			flags & 0x10 ? "MBZ" : "-",
118 			flags & 0x08 ? "MBZ" : "-",
119 			flags & 0x04 ? "MBZ" : "-",
120 			flags & 0x02 ? "MBZ" : "-",
121 			flags & 0x01 ? "MORE" : "-");
122 
123 		if (vflag == 1)
124 			body_len_printed = MIN(VBYTES + 1, body_len_printed);
125 		if (body_len_printed > 1) {
126 			printf(", first %"PRIu64" byte(s) of body:", body_len_printed - 1);
127 			hex_and_ascii_print("\n\t ", cp + header_len + 1, body_len_printed - 1);
128 			printf("\n");
129 		}
130 	}
131 
132 	TCHECK2(*cp, header_len + body_len_declared); /* Next frame within the buffer ? */
133 	return cp + header_len + body_len_declared;
134 
135 trunc:
136 	printf(" [|zmtp1]");
137 	return ep;
138 }
139 
140 void
141 zmtp1_print(const u_char *cp, u_int len) {
142 	const u_char *ep = MIN(snapend, cp + len);
143 
144 	printf(": ZMTP/1.0");
145 	while (cp < ep)
146 		cp = zmtp1_print_frame(cp, ep);
147 }
148 
149