1# Makefile.in generated by automake 1.14 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2013 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# $Id: Makefile.am 714 2013-08-19 15:30:21Z des $ 18VPATH = @srcdir@ 19am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' 20am__make_running_with_option = \ 21 case $${target_option-} in \ 22 ?) ;; \ 23 *) echo "am__make_running_with_option: internal error: invalid" \ 24 "target option '$${target_option-}' specified" >&2; \ 25 exit 1;; \ 26 esac; \ 27 has_opt=no; \ 28 sane_makeflags=$$MAKEFLAGS; \ 29 if $(am__is_gnu_make); then \ 30 sane_makeflags=$$MFLAGS; \ 31 else \ 32 case $$MAKEFLAGS in \ 33 *\\[\ \ ]*) \ 34 bs=\\; \ 35 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 36 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 37 esac; \ 38 fi; \ 39 skip_next=no; \ 40 strip_trailopt () \ 41 { \ 42 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 43 }; \ 44 for flg in $$sane_makeflags; do \ 45 test $$skip_next = yes && { skip_next=no; continue; }; \ 46 case $$flg in \ 47 *=*|--*) continue;; \ 48 -*I) strip_trailopt 'I'; skip_next=yes;; \ 49 -*I?*) strip_trailopt 'I';; \ 50 -*O) strip_trailopt 'O'; skip_next=yes;; \ 51 -*O?*) strip_trailopt 'O';; \ 52 -*l) strip_trailopt 'l'; skip_next=yes;; \ 53 -*l?*) strip_trailopt 'l';; \ 54 -[dEDm]) skip_next=yes;; \ 55 -[JT]) skip_next=yes;; \ 56 esac; \ 57 case $$flg in \ 58 *$$target_option*) has_opt=yes; break;; \ 59 esac; \ 60 done; \ 61 test $$has_opt = yes 62am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 63am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 64pkgdatadir = $(datadir)/@PACKAGE@ 65pkgincludedir = $(includedir)/@PACKAGE@ 66pkglibdir = $(libdir)/@PACKAGE@ 67pkglibexecdir = $(libexecdir)/@PACKAGE@ 68am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 69install_sh_DATA = $(install_sh) -c -m 644 70install_sh_PROGRAM = $(install_sh) -c 71install_sh_SCRIPT = $(install_sh) -c 72INSTALL_HEADER = $(INSTALL_DATA) 73transform = $(program_transform_name) 74NORMAL_INSTALL = : 75PRE_INSTALL = : 76POST_INSTALL = : 77NORMAL_UNINSTALL = : 78PRE_UNINSTALL = : 79POST_UNINSTALL = : 80build_triplet = @build@ 81host_triplet = @host@ 82@WITH_PAM_UNIX_TRUE@am__append_1 = pam_unix 83subdir = modules 84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am 85ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 86am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ 87 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 88 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 89 $(top_srcdir)/configure.ac 90am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 91 $(ACLOCAL_M4) 92mkinstalldirs = $(install_sh) -d 93CONFIG_HEADER = $(top_builddir)/config.h 94CONFIG_CLEAN_FILES = 95CONFIG_CLEAN_VPATH_FILES = 96AM_V_P = $(am__v_P_@AM_V@) 97am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 98am__v_P_0 = false 99am__v_P_1 = : 100AM_V_GEN = $(am__v_GEN_@AM_V@) 101am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 102am__v_GEN_0 = @echo " GEN " $@; 103am__v_GEN_1 = 104AM_V_at = $(am__v_at_@AM_V@) 105am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 106am__v_at_0 = @ 107am__v_at_1 = 108SOURCES = 109DIST_SOURCES = 110RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 111 ctags-recursive dvi-recursive html-recursive info-recursive \ 112 install-data-recursive install-dvi-recursive \ 113 install-exec-recursive install-html-recursive \ 114 install-info-recursive install-pdf-recursive \ 115 install-ps-recursive install-recursive installcheck-recursive \ 116 installdirs-recursive pdf-recursive ps-recursive \ 117 tags-recursive uninstall-recursive 118am__can_run_installinfo = \ 119 case $$AM_UPDATE_INFO_DIR in \ 120 n|no|NO) false;; \ 121 *) (install-info --version) >/dev/null 2>&1;; \ 122 esac 123RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 124 distclean-recursive maintainer-clean-recursive 125am__recursive_targets = \ 126 $(RECURSIVE_TARGETS) \ 127 $(RECURSIVE_CLEAN_TARGETS) \ 128 $(am__extra_recursive_targets) 129AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 130 distdir 131am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) 132# Read a list of newline-separated strings from the standard input, 133# and print each of them once, without duplicates. Input order is 134# *not* preserved. 135am__uniquify_input = $(AWK) '\ 136 BEGIN { nonempty = 0; } \ 137 { items[$$0] = 1; nonempty = 1; } \ 138 END { if (nonempty) { for (i in items) print i; }; } \ 139' 140# Make sure the list of sources is unique. This is necessary because, 141# e.g., the same source file might be shared among _SOURCES variables 142# for different programs/libraries. 143am__define_uniq_tagged_files = \ 144 list='$(am__tagged_files)'; \ 145 unique=`for i in $$list; do \ 146 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 147 done | $(am__uniquify_input)` 148ETAGS = etags 149CTAGS = ctags 150DIST_SUBDIRS = pam_deny pam_permit pam_unix 151DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 152am__relativize = \ 153 dir0=`pwd`; \ 154 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 155 sed_rest='s,^[^/]*/*,,'; \ 156 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 157 sed_butlast='s,/*[^/]*$$,,'; \ 158 while test -n "$$dir1"; do \ 159 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 160 if test "$$first" != "."; then \ 161 if test "$$first" = ".."; then \ 162 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 163 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 164 else \ 165 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 166 if test "$$first2" = "$$first"; then \ 167 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 168 else \ 169 dir2="../$$dir2"; \ 170 fi; \ 171 dir0="$$dir0"/"$$first"; \ 172 fi; \ 173 fi; \ 174 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 175 done; \ 176 reldir="$$dir2" 177ACLOCAL = @ACLOCAL@ 178AMTAR = @AMTAR@ 179AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 180AR = @AR@ 181AUTOCONF = @AUTOCONF@ 182AUTOHEADER = @AUTOHEADER@ 183AUTOMAKE = @AUTOMAKE@ 184AWK = @AWK@ 185CC = @CC@ 186CCDEPMODE = @CCDEPMODE@ 187CFLAGS = @CFLAGS@ 188CPP = @CPP@ 189CPPFLAGS = @CPPFLAGS@ 190CRYPTO_LIBS = @CRYPTO_LIBS@ 191CRYPT_LIBS = @CRYPT_LIBS@ 192CYGPATH_W = @CYGPATH_W@ 193DEFS = @DEFS@ 194DEPDIR = @DEPDIR@ 195DLLTOOL = @DLLTOOL@ 196DL_LIBS = @DL_LIBS@ 197DSYMUTIL = @DSYMUTIL@ 198DUMPBIN = @DUMPBIN@ 199ECHO_C = @ECHO_C@ 200ECHO_N = @ECHO_N@ 201ECHO_T = @ECHO_T@ 202EGREP = @EGREP@ 203EXEEXT = @EXEEXT@ 204FGREP = @FGREP@ 205GREP = @GREP@ 206INSTALL = @INSTALL@ 207INSTALL_DATA = @INSTALL_DATA@ 208INSTALL_PROGRAM = @INSTALL_PROGRAM@ 209INSTALL_SCRIPT = @INSTALL_SCRIPT@ 210INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 211LD = @LD@ 212LDFLAGS = @LDFLAGS@ 213LIBOBJS = @LIBOBJS@ 214LIBS = @LIBS@ 215LIBTOOL = @LIBTOOL@ 216LIB_MAJ = @LIB_MAJ@ 217LIPO = @LIPO@ 218LN_S = @LN_S@ 219LTLIBOBJS = @LTLIBOBJS@ 220MAKEINFO = @MAKEINFO@ 221MANIFEST_TOOL = @MANIFEST_TOOL@ 222MKDIR_P = @MKDIR_P@ 223NM = @NM@ 224NMEDIT = @NMEDIT@ 225OBJDUMP = @OBJDUMP@ 226OBJEXT = @OBJEXT@ 227OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@ 228OTOOL = @OTOOL@ 229OTOOL64 = @OTOOL64@ 230PACKAGE = @PACKAGE@ 231PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 232PACKAGE_NAME = @PACKAGE_NAME@ 233PACKAGE_STRING = @PACKAGE_STRING@ 234PACKAGE_TARNAME = @PACKAGE_TARNAME@ 235PACKAGE_URL = @PACKAGE_URL@ 236PACKAGE_VERSION = @PACKAGE_VERSION@ 237PATH_SEPARATOR = @PATH_SEPARATOR@ 238RANLIB = @RANLIB@ 239SED = @SED@ 240SET_MAKE = @SET_MAKE@ 241SHELL = @SHELL@ 242STRIP = @STRIP@ 243VERSION = @VERSION@ 244abs_builddir = @abs_builddir@ 245abs_srcdir = @abs_srcdir@ 246abs_top_builddir = @abs_top_builddir@ 247abs_top_srcdir = @abs_top_srcdir@ 248ac_ct_AR = @ac_ct_AR@ 249ac_ct_CC = @ac_ct_CC@ 250ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 251am__include = @am__include@ 252am__leading_dot = @am__leading_dot@ 253am__quote = @am__quote@ 254am__tar = @am__tar@ 255am__untar = @am__untar@ 256bindir = @bindir@ 257build = @build@ 258build_alias = @build_alias@ 259build_cpu = @build_cpu@ 260build_os = @build_os@ 261build_vendor = @build_vendor@ 262builddir = @builddir@ 263datadir = @datadir@ 264datarootdir = @datarootdir@ 265docdir = @docdir@ 266dvidir = @dvidir@ 267exec_prefix = @exec_prefix@ 268host = @host@ 269host_alias = @host_alias@ 270host_cpu = @host_cpu@ 271host_os = @host_os@ 272host_vendor = @host_vendor@ 273htmldir = @htmldir@ 274includedir = @includedir@ 275infodir = @infodir@ 276install_sh = @install_sh@ 277libdir = @libdir@ 278libexecdir = @libexecdir@ 279localedir = @localedir@ 280localstatedir = @localstatedir@ 281mandir = @mandir@ 282mkdir_p = @mkdir_p@ 283oldincludedir = @oldincludedir@ 284pdfdir = @pdfdir@ 285prefix = @prefix@ 286program_transform_name = @program_transform_name@ 287psdir = @psdir@ 288sbindir = @sbindir@ 289sharedstatedir = @sharedstatedir@ 290srcdir = @srcdir@ 291sysconfdir = @sysconfdir@ 292target_alias = @target_alias@ 293top_build_prefix = @top_build_prefix@ 294top_builddir = @top_builddir@ 295top_srcdir = @top_srcdir@ 296SUBDIRS = pam_deny pam_permit $(am__append_1) 297all: all-recursive 298 299.SUFFIXES: 300$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 301 @for dep in $?; do \ 302 case '$(am__configure_deps)' in \ 303 *$$dep*) \ 304 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 305 && { if test -f $@; then exit 0; else break; fi; }; \ 306 exit 1;; \ 307 esac; \ 308 done; \ 309 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign modules/Makefile'; \ 310 $(am__cd) $(top_srcdir) && \ 311 $(AUTOMAKE) --foreign modules/Makefile 312.PRECIOUS: Makefile 313Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 314 @case '$?' in \ 315 *config.status*) \ 316 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 317 *) \ 318 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 319 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 320 esac; 321 322$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 323 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 324 325$(top_srcdir)/configure: $(am__configure_deps) 326 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 327$(ACLOCAL_M4): $(am__aclocal_m4_deps) 328 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 329$(am__aclocal_m4_deps): 330 331mostlyclean-libtool: 332 -rm -f *.lo 333 334clean-libtool: 335 -rm -rf .libs _libs 336 337# This directory's subdirectories are mostly independent; you can cd 338# into them and run 'make' without going through this Makefile. 339# To change the values of 'make' variables: instead of editing Makefiles, 340# (1) if the variable is set in 'config.status', edit 'config.status' 341# (which will cause the Makefiles to be regenerated when you run 'make'); 342# (2) otherwise, pass the desired values on the 'make' command line. 343$(am__recursive_targets): 344 @fail=; \ 345 if $(am__make_keepgoing); then \ 346 failcom='fail=yes'; \ 347 else \ 348 failcom='exit 1'; \ 349 fi; \ 350 dot_seen=no; \ 351 target=`echo $@ | sed s/-recursive//`; \ 352 case "$@" in \ 353 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 354 *) list='$(SUBDIRS)' ;; \ 355 esac; \ 356 for subdir in $$list; do \ 357 echo "Making $$target in $$subdir"; \ 358 if test "$$subdir" = "."; then \ 359 dot_seen=yes; \ 360 local_target="$$target-am"; \ 361 else \ 362 local_target="$$target"; \ 363 fi; \ 364 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 365 || eval $$failcom; \ 366 done; \ 367 if test "$$dot_seen" = "no"; then \ 368 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 369 fi; test -z "$$fail" 370 371ID: $(am__tagged_files) 372 $(am__define_uniq_tagged_files); mkid -fID $$unique 373tags: tags-recursive 374TAGS: tags 375 376tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 377 set x; \ 378 here=`pwd`; \ 379 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 380 include_option=--etags-include; \ 381 empty_fix=.; \ 382 else \ 383 include_option=--include; \ 384 empty_fix=; \ 385 fi; \ 386 list='$(SUBDIRS)'; for subdir in $$list; do \ 387 if test "$$subdir" = .; then :; else \ 388 test ! -f $$subdir/TAGS || \ 389 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 390 fi; \ 391 done; \ 392 $(am__define_uniq_tagged_files); \ 393 shift; \ 394 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 395 test -n "$$unique" || unique=$$empty_fix; \ 396 if test $$# -gt 0; then \ 397 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 398 "$$@" $$unique; \ 399 else \ 400 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 401 $$unique; \ 402 fi; \ 403 fi 404ctags: ctags-recursive 405 406CTAGS: ctags 407ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 408 $(am__define_uniq_tagged_files); \ 409 test -z "$(CTAGS_ARGS)$$unique" \ 410 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 411 $$unique 412 413GTAGS: 414 here=`$(am__cd) $(top_builddir) && pwd` \ 415 && $(am__cd) $(top_srcdir) \ 416 && gtags -i $(GTAGS_ARGS) "$$here" 417cscopelist: cscopelist-recursive 418 419cscopelist-am: $(am__tagged_files) 420 list='$(am__tagged_files)'; \ 421 case "$(srcdir)" in \ 422 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 423 *) sdir=$(subdir)/$(srcdir) ;; \ 424 esac; \ 425 for i in $$list; do \ 426 if test -f "$$i"; then \ 427 echo "$(subdir)/$$i"; \ 428 else \ 429 echo "$$sdir/$$i"; \ 430 fi; \ 431 done >> $(top_builddir)/cscope.files 432 433distclean-tags: 434 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 435 436distdir: $(DISTFILES) 437 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 438 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 439 list='$(DISTFILES)'; \ 440 dist_files=`for file in $$list; do echo $$file; done | \ 441 sed -e "s|^$$srcdirstrip/||;t" \ 442 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 443 case $$dist_files in \ 444 */*) $(MKDIR_P) `echo "$$dist_files" | \ 445 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 446 sort -u` ;; \ 447 esac; \ 448 for file in $$dist_files; do \ 449 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 450 if test -d $$d/$$file; then \ 451 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 452 if test -d "$(distdir)/$$file"; then \ 453 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 454 fi; \ 455 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 456 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 457 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 458 fi; \ 459 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 460 else \ 461 test -f "$(distdir)/$$file" \ 462 || cp -p $$d/$$file "$(distdir)/$$file" \ 463 || exit 1; \ 464 fi; \ 465 done 466 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 467 if test "$$subdir" = .; then :; else \ 468 $(am__make_dryrun) \ 469 || test -d "$(distdir)/$$subdir" \ 470 || $(MKDIR_P) "$(distdir)/$$subdir" \ 471 || exit 1; \ 472 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 473 $(am__relativize); \ 474 new_distdir=$$reldir; \ 475 dir1=$$subdir; dir2="$(top_distdir)"; \ 476 $(am__relativize); \ 477 new_top_distdir=$$reldir; \ 478 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 479 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 480 ($(am__cd) $$subdir && \ 481 $(MAKE) $(AM_MAKEFLAGS) \ 482 top_distdir="$$new_top_distdir" \ 483 distdir="$$new_distdir" \ 484 am__remove_distdir=: \ 485 am__skip_length_check=: \ 486 am__skip_mode_fix=: \ 487 distdir) \ 488 || exit 1; \ 489 fi; \ 490 done 491check-am: all-am 492check: check-recursive 493all-am: Makefile 494installdirs: installdirs-recursive 495installdirs-am: 496install: install-recursive 497install-exec: install-exec-recursive 498install-data: install-data-recursive 499uninstall: uninstall-recursive 500 501install-am: all-am 502 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 503 504installcheck: installcheck-recursive 505install-strip: 506 if test -z '$(STRIP)'; then \ 507 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 508 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 509 install; \ 510 else \ 511 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 512 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 513 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 514 fi 515mostlyclean-generic: 516 517clean-generic: 518 519distclean-generic: 520 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 521 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 522 523maintainer-clean-generic: 524 @echo "This command is intended for maintainers to use" 525 @echo "it deletes files that may require special tools to rebuild." 526clean: clean-recursive 527 528clean-am: clean-generic clean-libtool mostlyclean-am 529 530distclean: distclean-recursive 531 -rm -f Makefile 532distclean-am: clean-am distclean-generic distclean-tags 533 534dvi: dvi-recursive 535 536dvi-am: 537 538html: html-recursive 539 540html-am: 541 542info: info-recursive 543 544info-am: 545 546install-data-am: 547 548install-dvi: install-dvi-recursive 549 550install-dvi-am: 551 552install-exec-am: 553 554install-html: install-html-recursive 555 556install-html-am: 557 558install-info: install-info-recursive 559 560install-info-am: 561 562install-man: 563 564install-pdf: install-pdf-recursive 565 566install-pdf-am: 567 568install-ps: install-ps-recursive 569 570install-ps-am: 571 572installcheck-am: 573 574maintainer-clean: maintainer-clean-recursive 575 -rm -f Makefile 576maintainer-clean-am: distclean-am maintainer-clean-generic 577 578mostlyclean: mostlyclean-recursive 579 580mostlyclean-am: mostlyclean-generic mostlyclean-libtool 581 582pdf: pdf-recursive 583 584pdf-am: 585 586ps: ps-recursive 587 588ps-am: 589 590uninstall-am: 591 592.MAKE: $(am__recursive_targets) install-am install-strip 593 594.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ 595 check-am clean clean-generic clean-libtool cscopelist-am ctags \ 596 ctags-am distclean distclean-generic distclean-libtool \ 597 distclean-tags distdir dvi dvi-am html html-am info info-am \ 598 install install-am install-data install-data-am install-dvi \ 599 install-dvi-am install-exec install-exec-am install-html \ 600 install-html-am install-info install-info-am install-man \ 601 install-pdf install-pdf-am install-ps install-ps-am \ 602 install-strip installcheck installcheck-am installdirs \ 603 installdirs-am maintainer-clean maintainer-clean-generic \ 604 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ 605 ps ps-am tags tags-am uninstall uninstall-am 606 607 608# Tell versions [3.59,3.63) of GNU make to not export all variables. 609# Otherwise a system limit (for SysV at least) may be exceeded. 610.NOEXPORT: 611