xref: /freebsd/contrib/openpam/lib/Makefile.in (revision de7b456e596ff18032d2cbfdf244c66f36770da4)
1# Makefile.in generated by automake 1.14 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# $Id: Makefile.am 714 2013-08-19 15:30:21Z des $
18VPATH = @srcdir@
19am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
20am__make_running_with_option = \
21  case $${target_option-} in \
22      ?) ;; \
23      *) echo "am__make_running_with_option: internal error: invalid" \
24              "target option '$${target_option-}' specified" >&2; \
25         exit 1;; \
26  esac; \
27  has_opt=no; \
28  sane_makeflags=$$MAKEFLAGS; \
29  if $(am__is_gnu_make); then \
30    sane_makeflags=$$MFLAGS; \
31  else \
32    case $$MAKEFLAGS in \
33      *\\[\ \	]*) \
34        bs=\\; \
35        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
36          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
37    esac; \
38  fi; \
39  skip_next=no; \
40  strip_trailopt () \
41  { \
42    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
43  }; \
44  for flg in $$sane_makeflags; do \
45    test $$skip_next = yes && { skip_next=no; continue; }; \
46    case $$flg in \
47      *=*|--*) continue;; \
48        -*I) strip_trailopt 'I'; skip_next=yes;; \
49      -*I?*) strip_trailopt 'I';; \
50        -*O) strip_trailopt 'O'; skip_next=yes;; \
51      -*O?*) strip_trailopt 'O';; \
52        -*l) strip_trailopt 'l'; skip_next=yes;; \
53      -*l?*) strip_trailopt 'l';; \
54      -[dEDm]) skip_next=yes;; \
55      -[JT]) skip_next=yes;; \
56    esac; \
57    case $$flg in \
58      *$$target_option*) has_opt=yes; break;; \
59    esac; \
60  done; \
61  test $$has_opt = yes
62am__make_dryrun = (target_option=n; $(am__make_running_with_option))
63am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
64pkgdatadir = $(datadir)/@PACKAGE@
65pkgincludedir = $(includedir)/@PACKAGE@
66pkglibdir = $(libdir)/@PACKAGE@
67pkglibexecdir = $(libexecdir)/@PACKAGE@
68am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
69install_sh_DATA = $(install_sh) -c -m 644
70install_sh_PROGRAM = $(install_sh) -c
71install_sh_SCRIPT = $(install_sh) -c
72INSTALL_HEADER = $(INSTALL_DATA)
73transform = $(program_transform_name)
74NORMAL_INSTALL = :
75PRE_INSTALL = :
76POST_INSTALL = :
77NORMAL_UNINSTALL = :
78PRE_UNINSTALL = :
79POST_UNINSTALL = :
80build_triplet = @build@
81host_triplet = @host@
82subdir = lib
83DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
84ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
85am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
86	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
87	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
88	$(top_srcdir)/configure.ac
89am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
90	$(ACLOCAL_M4)
91mkinstalldirs = $(install_sh) -d
92CONFIG_HEADER = $(top_builddir)/config.h
93CONFIG_CLEAN_FILES =
94CONFIG_CLEAN_VPATH_FILES =
95AM_V_P = $(am__v_P_@AM_V@)
96am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
97am__v_P_0 = false
98am__v_P_1 = :
99AM_V_GEN = $(am__v_GEN_@AM_V@)
100am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
101am__v_GEN_0 = @echo "  GEN     " $@;
102am__v_GEN_1 =
103AM_V_at = $(am__v_at_@AM_V@)
104am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
105am__v_at_0 = @
106am__v_at_1 =
107SOURCES =
108DIST_SOURCES =
109RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
110	ctags-recursive dvi-recursive html-recursive info-recursive \
111	install-data-recursive install-dvi-recursive \
112	install-exec-recursive install-html-recursive \
113	install-info-recursive install-pdf-recursive \
114	install-ps-recursive install-recursive installcheck-recursive \
115	installdirs-recursive pdf-recursive ps-recursive \
116	tags-recursive uninstall-recursive
117am__can_run_installinfo = \
118  case $$AM_UPDATE_INFO_DIR in \
119    n|no|NO) false;; \
120    *) (install-info --version) >/dev/null 2>&1;; \
121  esac
122RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
123  distclean-recursive maintainer-clean-recursive
124am__recursive_targets = \
125  $(RECURSIVE_TARGETS) \
126  $(RECURSIVE_CLEAN_TARGETS) \
127  $(am__extra_recursive_targets)
128AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
129	distdir
130am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
131# Read a list of newline-separated strings from the standard input,
132# and print each of them once, without duplicates.  Input order is
133# *not* preserved.
134am__uniquify_input = $(AWK) '\
135  BEGIN { nonempty = 0; } \
136  { items[$$0] = 1; nonempty = 1; } \
137  END { if (nonempty) { for (i in items) print i; }; } \
138'
139# Make sure the list of sources is unique.  This is necessary because,
140# e.g., the same source file might be shared among _SOURCES variables
141# for different programs/libraries.
142am__define_uniq_tagged_files = \
143  list='$(am__tagged_files)'; \
144  unique=`for i in $$list; do \
145    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
146  done | $(am__uniquify_input)`
147ETAGS = etags
148CTAGS = ctags
149DIST_SUBDIRS = $(SUBDIRS)
150DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
151am__relativize = \
152  dir0=`pwd`; \
153  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
154  sed_rest='s,^[^/]*/*,,'; \
155  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
156  sed_butlast='s,/*[^/]*$$,,'; \
157  while test -n "$$dir1"; do \
158    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
159    if test "$$first" != "."; then \
160      if test "$$first" = ".."; then \
161        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
162        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
163      else \
164        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
165        if test "$$first2" = "$$first"; then \
166          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
167        else \
168          dir2="../$$dir2"; \
169        fi; \
170        dir0="$$dir0"/"$$first"; \
171      fi; \
172    fi; \
173    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
174  done; \
175  reldir="$$dir2"
176ACLOCAL = @ACLOCAL@
177AMTAR = @AMTAR@
178AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
179AR = @AR@
180AUTOCONF = @AUTOCONF@
181AUTOHEADER = @AUTOHEADER@
182AUTOMAKE = @AUTOMAKE@
183AWK = @AWK@
184CC = @CC@
185CCDEPMODE = @CCDEPMODE@
186CFLAGS = @CFLAGS@
187CPP = @CPP@
188CPPFLAGS = @CPPFLAGS@
189CRYPTO_LIBS = @CRYPTO_LIBS@
190CRYPT_LIBS = @CRYPT_LIBS@
191CYGPATH_W = @CYGPATH_W@
192DEFS = @DEFS@
193DEPDIR = @DEPDIR@
194DLLTOOL = @DLLTOOL@
195DL_LIBS = @DL_LIBS@
196DSYMUTIL = @DSYMUTIL@
197DUMPBIN = @DUMPBIN@
198ECHO_C = @ECHO_C@
199ECHO_N = @ECHO_N@
200ECHO_T = @ECHO_T@
201EGREP = @EGREP@
202EXEEXT = @EXEEXT@
203FGREP = @FGREP@
204GREP = @GREP@
205INSTALL = @INSTALL@
206INSTALL_DATA = @INSTALL_DATA@
207INSTALL_PROGRAM = @INSTALL_PROGRAM@
208INSTALL_SCRIPT = @INSTALL_SCRIPT@
209INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
210LD = @LD@
211LDFLAGS = @LDFLAGS@
212LIBOBJS = @LIBOBJS@
213LIBS = @LIBS@
214LIBTOOL = @LIBTOOL@
215LIB_MAJ = @LIB_MAJ@
216LIPO = @LIPO@
217LN_S = @LN_S@
218LTLIBOBJS = @LTLIBOBJS@
219MAKEINFO = @MAKEINFO@
220MANIFEST_TOOL = @MANIFEST_TOOL@
221MKDIR_P = @MKDIR_P@
222NM = @NM@
223NMEDIT = @NMEDIT@
224OBJDUMP = @OBJDUMP@
225OBJEXT = @OBJEXT@
226OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
227OTOOL = @OTOOL@
228OTOOL64 = @OTOOL64@
229PACKAGE = @PACKAGE@
230PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
231PACKAGE_NAME = @PACKAGE_NAME@
232PACKAGE_STRING = @PACKAGE_STRING@
233PACKAGE_TARNAME = @PACKAGE_TARNAME@
234PACKAGE_URL = @PACKAGE_URL@
235PACKAGE_VERSION = @PACKAGE_VERSION@
236PATH_SEPARATOR = @PATH_SEPARATOR@
237RANLIB = @RANLIB@
238SED = @SED@
239SET_MAKE = @SET_MAKE@
240SHELL = @SHELL@
241STRIP = @STRIP@
242VERSION = @VERSION@
243abs_builddir = @abs_builddir@
244abs_srcdir = @abs_srcdir@
245abs_top_builddir = @abs_top_builddir@
246abs_top_srcdir = @abs_top_srcdir@
247ac_ct_AR = @ac_ct_AR@
248ac_ct_CC = @ac_ct_CC@
249ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
250am__include = @am__include@
251am__leading_dot = @am__leading_dot@
252am__quote = @am__quote@
253am__tar = @am__tar@
254am__untar = @am__untar@
255bindir = @bindir@
256build = @build@
257build_alias = @build_alias@
258build_cpu = @build_cpu@
259build_os = @build_os@
260build_vendor = @build_vendor@
261builddir = @builddir@
262datadir = @datadir@
263datarootdir = @datarootdir@
264docdir = @docdir@
265dvidir = @dvidir@
266exec_prefix = @exec_prefix@
267host = @host@
268host_alias = @host_alias@
269host_cpu = @host_cpu@
270host_os = @host_os@
271host_vendor = @host_vendor@
272htmldir = @htmldir@
273includedir = @includedir@
274infodir = @infodir@
275install_sh = @install_sh@
276libdir = @libdir@
277libexecdir = @libexecdir@
278localedir = @localedir@
279localstatedir = @localstatedir@
280mandir = @mandir@
281mkdir_p = @mkdir_p@
282oldincludedir = @oldincludedir@
283pdfdir = @pdfdir@
284prefix = @prefix@
285program_transform_name = @program_transform_name@
286psdir = @psdir@
287sbindir = @sbindir@
288sharedstatedir = @sharedstatedir@
289srcdir = @srcdir@
290sysconfdir = @sysconfdir@
291target_alias = @target_alias@
292top_build_prefix = @top_build_prefix@
293top_builddir = @top_builddir@
294top_srcdir = @top_srcdir@
295SUBDIRS = libpam
296all: all-recursive
297
298.SUFFIXES:
299$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
300	@for dep in $?; do \
301	  case '$(am__configure_deps)' in \
302	    *$$dep*) \
303	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
304	        && { if test -f $@; then exit 0; else break; fi; }; \
305	      exit 1;; \
306	  esac; \
307	done; \
308	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/Makefile'; \
309	$(am__cd) $(top_srcdir) && \
310	  $(AUTOMAKE) --foreign lib/Makefile
311.PRECIOUS: Makefile
312Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
313	@case '$?' in \
314	  *config.status*) \
315	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
316	  *) \
317	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
318	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
319	esac;
320
321$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
322	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
323
324$(top_srcdir)/configure:  $(am__configure_deps)
325	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
326$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
327	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
328$(am__aclocal_m4_deps):
329
330mostlyclean-libtool:
331	-rm -f *.lo
332
333clean-libtool:
334	-rm -rf .libs _libs
335
336# This directory's subdirectories are mostly independent; you can cd
337# into them and run 'make' without going through this Makefile.
338# To change the values of 'make' variables: instead of editing Makefiles,
339# (1) if the variable is set in 'config.status', edit 'config.status'
340#     (which will cause the Makefiles to be regenerated when you run 'make');
341# (2) otherwise, pass the desired values on the 'make' command line.
342$(am__recursive_targets):
343	@fail=; \
344	if $(am__make_keepgoing); then \
345	  failcom='fail=yes'; \
346	else \
347	  failcom='exit 1'; \
348	fi; \
349	dot_seen=no; \
350	target=`echo $@ | sed s/-recursive//`; \
351	case "$@" in \
352	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
353	  *) list='$(SUBDIRS)' ;; \
354	esac; \
355	for subdir in $$list; do \
356	  echo "Making $$target in $$subdir"; \
357	  if test "$$subdir" = "."; then \
358	    dot_seen=yes; \
359	    local_target="$$target-am"; \
360	  else \
361	    local_target="$$target"; \
362	  fi; \
363	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
364	  || eval $$failcom; \
365	done; \
366	if test "$$dot_seen" = "no"; then \
367	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
368	fi; test -z "$$fail"
369
370ID: $(am__tagged_files)
371	$(am__define_uniq_tagged_files); mkid -fID $$unique
372tags: tags-recursive
373TAGS: tags
374
375tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
376	set x; \
377	here=`pwd`; \
378	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
379	  include_option=--etags-include; \
380	  empty_fix=.; \
381	else \
382	  include_option=--include; \
383	  empty_fix=; \
384	fi; \
385	list='$(SUBDIRS)'; for subdir in $$list; do \
386	  if test "$$subdir" = .; then :; else \
387	    test ! -f $$subdir/TAGS || \
388	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
389	  fi; \
390	done; \
391	$(am__define_uniq_tagged_files); \
392	shift; \
393	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
394	  test -n "$$unique" || unique=$$empty_fix; \
395	  if test $$# -gt 0; then \
396	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
397	      "$$@" $$unique; \
398	  else \
399	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
400	      $$unique; \
401	  fi; \
402	fi
403ctags: ctags-recursive
404
405CTAGS: ctags
406ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
407	$(am__define_uniq_tagged_files); \
408	test -z "$(CTAGS_ARGS)$$unique" \
409	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
410	     $$unique
411
412GTAGS:
413	here=`$(am__cd) $(top_builddir) && pwd` \
414	  && $(am__cd) $(top_srcdir) \
415	  && gtags -i $(GTAGS_ARGS) "$$here"
416cscopelist: cscopelist-recursive
417
418cscopelist-am: $(am__tagged_files)
419	list='$(am__tagged_files)'; \
420	case "$(srcdir)" in \
421	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
422	  *) sdir=$(subdir)/$(srcdir) ;; \
423	esac; \
424	for i in $$list; do \
425	  if test -f "$$i"; then \
426	    echo "$(subdir)/$$i"; \
427	  else \
428	    echo "$$sdir/$$i"; \
429	  fi; \
430	done >> $(top_builddir)/cscope.files
431
432distclean-tags:
433	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
434
435distdir: $(DISTFILES)
436	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
437	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
438	list='$(DISTFILES)'; \
439	  dist_files=`for file in $$list; do echo $$file; done | \
440	  sed -e "s|^$$srcdirstrip/||;t" \
441	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
442	case $$dist_files in \
443	  */*) $(MKDIR_P) `echo "$$dist_files" | \
444			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
445			   sort -u` ;; \
446	esac; \
447	for file in $$dist_files; do \
448	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
449	  if test -d $$d/$$file; then \
450	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
451	    if test -d "$(distdir)/$$file"; then \
452	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
453	    fi; \
454	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
455	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
456	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
457	    fi; \
458	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
459	  else \
460	    test -f "$(distdir)/$$file" \
461	    || cp -p $$d/$$file "$(distdir)/$$file" \
462	    || exit 1; \
463	  fi; \
464	done
465	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
466	  if test "$$subdir" = .; then :; else \
467	    $(am__make_dryrun) \
468	      || test -d "$(distdir)/$$subdir" \
469	      || $(MKDIR_P) "$(distdir)/$$subdir" \
470	      || exit 1; \
471	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
472	    $(am__relativize); \
473	    new_distdir=$$reldir; \
474	    dir1=$$subdir; dir2="$(top_distdir)"; \
475	    $(am__relativize); \
476	    new_top_distdir=$$reldir; \
477	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
478	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
479	    ($(am__cd) $$subdir && \
480	      $(MAKE) $(AM_MAKEFLAGS) \
481	        top_distdir="$$new_top_distdir" \
482	        distdir="$$new_distdir" \
483		am__remove_distdir=: \
484		am__skip_length_check=: \
485		am__skip_mode_fix=: \
486	        distdir) \
487	      || exit 1; \
488	  fi; \
489	done
490check-am: all-am
491check: check-recursive
492all-am: Makefile
493installdirs: installdirs-recursive
494installdirs-am:
495install: install-recursive
496install-exec: install-exec-recursive
497install-data: install-data-recursive
498uninstall: uninstall-recursive
499
500install-am: all-am
501	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
502
503installcheck: installcheck-recursive
504install-strip:
505	if test -z '$(STRIP)'; then \
506	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
507	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
508	      install; \
509	else \
510	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
511	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
512	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
513	fi
514mostlyclean-generic:
515
516clean-generic:
517
518distclean-generic:
519	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
520	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
521
522maintainer-clean-generic:
523	@echo "This command is intended for maintainers to use"
524	@echo "it deletes files that may require special tools to rebuild."
525clean: clean-recursive
526
527clean-am: clean-generic clean-libtool mostlyclean-am
528
529distclean: distclean-recursive
530	-rm -f Makefile
531distclean-am: clean-am distclean-generic distclean-tags
532
533dvi: dvi-recursive
534
535dvi-am:
536
537html: html-recursive
538
539html-am:
540
541info: info-recursive
542
543info-am:
544
545install-data-am:
546
547install-dvi: install-dvi-recursive
548
549install-dvi-am:
550
551install-exec-am:
552
553install-html: install-html-recursive
554
555install-html-am:
556
557install-info: install-info-recursive
558
559install-info-am:
560
561install-man:
562
563install-pdf: install-pdf-recursive
564
565install-pdf-am:
566
567install-ps: install-ps-recursive
568
569install-ps-am:
570
571installcheck-am:
572
573maintainer-clean: maintainer-clean-recursive
574	-rm -f Makefile
575maintainer-clean-am: distclean-am maintainer-clean-generic
576
577mostlyclean: mostlyclean-recursive
578
579mostlyclean-am: mostlyclean-generic mostlyclean-libtool
580
581pdf: pdf-recursive
582
583pdf-am:
584
585ps: ps-recursive
586
587ps-am:
588
589uninstall-am:
590
591.MAKE: $(am__recursive_targets) install-am install-strip
592
593.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
594	check-am clean clean-generic clean-libtool cscopelist-am ctags \
595	ctags-am distclean distclean-generic distclean-libtool \
596	distclean-tags distdir dvi dvi-am html html-am info info-am \
597	install install-am install-data install-data-am install-dvi \
598	install-dvi-am install-exec install-exec-am install-html \
599	install-html-am install-info install-info-am install-man \
600	install-pdf install-pdf-am install-ps install-ps-am \
601	install-strip installcheck installcheck-am installdirs \
602	installdirs-am maintainer-clean maintainer-clean-generic \
603	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
604	ps ps-am tags tags-am uninstall uninstall-am
605
606
607# Tell versions [3.59,3.63) of GNU make to not export all variables.
608# Otherwise a system limit (for SysV at least) may be exceeded.
609.NOEXPORT:
610