xref: /freebsd/contrib/openpam/doc/Makefile.in (revision aa24f48b361effe51163877d84f1b70d32b77e04) 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17# $OpenPAM: Makefile.am 938 2017-04-30 21:34:42Z des $
18VPATH = @srcdir@
19am__is_gnu_make = { \
20  if test -z '$(MAKELEVEL)'; then \
21    false; \
22  elif test -n '$(MAKE_HOST)'; then \
23    true; \
24  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
25    true; \
26  else \
27    false; \
28  fi; \
29}
30am__make_running_with_option = \
31  case $${target_option-} in \
32      ?) ;; \
33      *) echo "am__make_running_with_option: internal error: invalid" \
34              "target option '$${target_option-}' specified" >&2; \
35         exit 1;; \
36  esac; \
37  has_opt=no; \
38  sane_makeflags=$$MAKEFLAGS; \
39  if $(am__is_gnu_make); then \
40    sane_makeflags=$$MFLAGS; \
41  else \
42    case $$MAKEFLAGS in \
43      *\\[\ \	]*) \
44        bs=\\; \
45        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
46          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
47    esac; \
48  fi; \
49  skip_next=no; \
50  strip_trailopt () \
51  { \
52    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
53  }; \
54  for flg in $$sane_makeflags; do \
55    test $$skip_next = yes && { skip_next=no; continue; }; \
56    case $$flg in \
57      *=*|--*) continue;; \
58        -*I) strip_trailopt 'I'; skip_next=yes;; \
59      -*I?*) strip_trailopt 'I';; \
60        -*O) strip_trailopt 'O'; skip_next=yes;; \
61      -*O?*) strip_trailopt 'O';; \
62        -*l) strip_trailopt 'l'; skip_next=yes;; \
63      -*l?*) strip_trailopt 'l';; \
64      -[dEDm]) skip_next=yes;; \
65      -[JT]) skip_next=yes;; \
66    esac; \
67    case $$flg in \
68      *$$target_option*) has_opt=yes; break;; \
69    esac; \
70  done; \
71  test $$has_opt = yes
72am__make_dryrun = (target_option=n; $(am__make_running_with_option))
73am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
74pkgdatadir = $(datadir)/@PACKAGE@
75pkgincludedir = $(includedir)/@PACKAGE@
76pkglibdir = $(libdir)/@PACKAGE@
77pkglibexecdir = $(libexecdir)/@PACKAGE@
78am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
79install_sh_DATA = $(install_sh) -c -m 644
80install_sh_PROGRAM = $(install_sh) -c
81install_sh_SCRIPT = $(install_sh) -c
82INSTALL_HEADER = $(INSTALL_DATA)
83transform = $(program_transform_name)
84NORMAL_INSTALL = :
85PRE_INSTALL = :
86POST_INSTALL = :
87NORMAL_UNINSTALL = :
88PRE_UNINSTALL = :
89POST_UNINSTALL = :
90build_triplet = @build@
91host_triplet = @host@
92subdir = doc
93ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
94am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
95	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
96	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
97	$(top_srcdir)/configure.ac
98am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
99	$(ACLOCAL_M4)
100DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
101mkinstalldirs = $(install_sh) -d
102CONFIG_HEADER = $(top_builddir)/config.h
103CONFIG_CLEAN_FILES =
104CONFIG_CLEAN_VPATH_FILES =
105AM_V_P = $(am__v_P_@AM_V@)
106am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
107am__v_P_0 = false
108am__v_P_1 = :
109AM_V_GEN = $(am__v_GEN_@AM_V@)
110am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
111am__v_GEN_0 = @echo "  GEN     " $@;
112am__v_GEN_1 =
113AM_V_at = $(am__v_at_@AM_V@)
114am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
115am__v_at_0 = @
116am__v_at_1 =
117SOURCES =
118DIST_SOURCES =
119RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
120	ctags-recursive dvi-recursive html-recursive info-recursive \
121	install-data-recursive install-dvi-recursive \
122	install-exec-recursive install-html-recursive \
123	install-info-recursive install-pdf-recursive \
124	install-ps-recursive install-recursive installcheck-recursive \
125	installdirs-recursive pdf-recursive ps-recursive \
126	tags-recursive uninstall-recursive
127am__can_run_installinfo = \
128  case $$AM_UPDATE_INFO_DIR in \
129    n|no|NO) false;; \
130    *) (install-info --version) >/dev/null 2>&1;; \
131  esac
132RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
133  distclean-recursive maintainer-clean-recursive
134am__recursive_targets = \
135  $(RECURSIVE_TARGETS) \
136  $(RECURSIVE_CLEAN_TARGETS) \
137  $(am__extra_recursive_targets)
138AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
139	distdir
140am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
141# Read a list of newline-separated strings from the standard input,
142# and print each of them once, without duplicates.  Input order is
143# *not* preserved.
144am__uniquify_input = $(AWK) '\
145  BEGIN { nonempty = 0; } \
146  { items[$$0] = 1; nonempty = 1; } \
147  END { if (nonempty) { for (i in items) print i; }; } \
148'
149# Make sure the list of sources is unique.  This is necessary because,
150# e.g., the same source file might be shared among _SOURCES variables
151# for different programs/libraries.
152am__define_uniq_tagged_files = \
153  list='$(am__tagged_files)'; \
154  unique=`for i in $$list; do \
155    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
156  done | $(am__uniquify_input)`
157ETAGS = etags
158CTAGS = ctags
159DIST_SUBDIRS = $(SUBDIRS)
160am__DIST_COMMON = $(srcdir)/Makefile.in
161DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
162am__relativize = \
163  dir0=`pwd`; \
164  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
165  sed_rest='s,^[^/]*/*,,'; \
166  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
167  sed_butlast='s,/*[^/]*$$,,'; \
168  while test -n "$$dir1"; do \
169    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
170    if test "$$first" != "."; then \
171      if test "$$first" = ".."; then \
172        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
173        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
174      else \
175        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
176        if test "$$first2" = "$$first"; then \
177          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
178        else \
179          dir2="../$$dir2"; \
180        fi; \
181        dir0="$$dir0"/"$$first"; \
182      fi; \
183    fi; \
184    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
185  done; \
186  reldir="$$dir2"
187ACLOCAL = @ACLOCAL@
188AMTAR = @AMTAR@
189AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
190AR = @AR@
191AUTOCONF = @AUTOCONF@
192AUTOHEADER = @AUTOHEADER@
193AUTOMAKE = @AUTOMAKE@
194AWK = @AWK@
195CC = @CC@
196CCDEPMODE = @CCDEPMODE@
197CFLAGS = @CFLAGS@
198CPP = @CPP@
199CPPFLAGS = @CPPFLAGS@
200CRYB_TEST_LIBS = @CRYB_TEST_LIBS@
201CRYPTO_LIBS = @CRYPTO_LIBS@
202CRYPT_LIBS = @CRYPT_LIBS@
203CYGPATH_W = @CYGPATH_W@
204DEFS = @DEFS@
205DEPDIR = @DEPDIR@
206DLLTOOL = @DLLTOOL@
207DL_LIBS = @DL_LIBS@
208DSYMUTIL = @DSYMUTIL@
209DUMPBIN = @DUMPBIN@
210ECHO_C = @ECHO_C@
211ECHO_N = @ECHO_N@
212ECHO_T = @ECHO_T@
213EGREP = @EGREP@
214EXEEXT = @EXEEXT@
215FGREP = @FGREP@
216GREP = @GREP@
217INSTALL = @INSTALL@
218INSTALL_DATA = @INSTALL_DATA@
219INSTALL_PROGRAM = @INSTALL_PROGRAM@
220INSTALL_SCRIPT = @INSTALL_SCRIPT@
221INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
222LD = @LD@
223LDFLAGS = @LDFLAGS@
224LIBOBJS = @LIBOBJS@
225LIBS = @LIBS@
226LIBTOOL = @LIBTOOL@
227LIB_MAJ = @LIB_MAJ@
228LIPO = @LIPO@
229LN_S = @LN_S@
230LTLIBOBJS = @LTLIBOBJS@
231LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
232MAKEINFO = @MAKEINFO@
233MANIFEST_TOOL = @MANIFEST_TOOL@
234MKDIR_P = @MKDIR_P@
235NM = @NM@
236NMEDIT = @NMEDIT@
237OBJDUMP = @OBJDUMP@
238OBJEXT = @OBJEXT@
239OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
240OTOOL = @OTOOL@
241OTOOL64 = @OTOOL64@
242PACKAGE = @PACKAGE@
243PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
244PACKAGE_NAME = @PACKAGE_NAME@
245PACKAGE_STRING = @PACKAGE_STRING@
246PACKAGE_TARNAME = @PACKAGE_TARNAME@
247PACKAGE_URL = @PACKAGE_URL@
248PACKAGE_VERSION = @PACKAGE_VERSION@
249PATH_SEPARATOR = @PATH_SEPARATOR@
250RANLIB = @RANLIB@
251SED = @SED@
252SET_MAKE = @SET_MAKE@
253SHELL = @SHELL@
254STRIP = @STRIP@
255SYSTEM_LIBPAM = @SYSTEM_LIBPAM@
256VERSION = @VERSION@
257abs_builddir = @abs_builddir@
258abs_srcdir = @abs_srcdir@
259abs_top_builddir = @abs_top_builddir@
260abs_top_srcdir = @abs_top_srcdir@
261ac_ct_AR = @ac_ct_AR@
262ac_ct_CC = @ac_ct_CC@
263ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
264am__include = @am__include@
265am__leading_dot = @am__leading_dot@
266am__quote = @am__quote@
267am__tar = @am__tar@
268am__untar = @am__untar@
269bindir = @bindir@
270build = @build@
271build_alias = @build_alias@
272build_cpu = @build_cpu@
273build_os = @build_os@
274build_vendor = @build_vendor@
275builddir = @builddir@
276datadir = @datadir@
277datarootdir = @datarootdir@
278docdir = @docdir@
279dvidir = @dvidir@
280exec_prefix = @exec_prefix@
281host = @host@
282host_alias = @host_alias@
283host_cpu = @host_cpu@
284host_os = @host_os@
285host_vendor = @host_vendor@
286htmldir = @htmldir@
287includedir = @includedir@
288infodir = @infodir@
289install_sh = @install_sh@
290libdir = @libdir@
291libexecdir = @libexecdir@
292localedir = @localedir@
293localstatedir = @localstatedir@
294mandir = @mandir@
295mkdir_p = @mkdir_p@
296oldincludedir = @oldincludedir@
297pdfdir = @pdfdir@
298prefix = @prefix@
299program_transform_name = @program_transform_name@
300psdir = @psdir@
301sbindir = @sbindir@
302sharedstatedir = @sharedstatedir@
303srcdir = @srcdir@
304sysconfdir = @sysconfdir@
305target_alias = @target_alias@
306top_build_prefix = @top_build_prefix@
307top_builddir = @top_builddir@
308top_srcdir = @top_srcdir@
309SUBDIRS = man
310all: all-recursive
311
312.SUFFIXES:
313$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
314	@for dep in $?; do \
315	  case '$(am__configure_deps)' in \
316	    *$$dep*) \
317	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
318	        && { if test -f $@; then exit 0; else break; fi; }; \
319	      exit 1;; \
320	  esac; \
321	done; \
322	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
323	$(am__cd) $(top_srcdir) && \
324	  $(AUTOMAKE) --foreign doc/Makefile
325Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
326	@case '$?' in \
327	  *config.status*) \
328	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
329	  *) \
330	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
331	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
332	esac;
333
334$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
335	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
336
337$(top_srcdir)/configure:  $(am__configure_deps)
338	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
339$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
340	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
341$(am__aclocal_m4_deps):
342
343mostlyclean-libtool:
344	-rm -f *.lo
345
346clean-libtool:
347	-rm -rf .libs _libs
348
349# This directory's subdirectories are mostly independent; you can cd
350# into them and run 'make' without going through this Makefile.
351# To change the values of 'make' variables: instead of editing Makefiles,
352# (1) if the variable is set in 'config.status', edit 'config.status'
353#     (which will cause the Makefiles to be regenerated when you run 'make');
354# (2) otherwise, pass the desired values on the 'make' command line.
355$(am__recursive_targets):
356	@fail=; \
357	if $(am__make_keepgoing); then \
358	  failcom='fail=yes'; \
359	else \
360	  failcom='exit 1'; \
361	fi; \
362	dot_seen=no; \
363	target=`echo $@ | sed s/-recursive//`; \
364	case "$@" in \
365	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
366	  *) list='$(SUBDIRS)' ;; \
367	esac; \
368	for subdir in $$list; do \
369	  echo "Making $$target in $$subdir"; \
370	  if test "$$subdir" = "."; then \
371	    dot_seen=yes; \
372	    local_target="$$target-am"; \
373	  else \
374	    local_target="$$target"; \
375	  fi; \
376	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
377	  || eval $$failcom; \
378	done; \
379	if test "$$dot_seen" = "no"; then \
380	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
381	fi; test -z "$$fail"
382
383ID: $(am__tagged_files)
384	$(am__define_uniq_tagged_files); mkid -fID $$unique
385tags: tags-recursive
386TAGS: tags
387
388tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
389	set x; \
390	here=`pwd`; \
391	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
392	  include_option=--etags-include; \
393	  empty_fix=.; \
394	else \
395	  include_option=--include; \
396	  empty_fix=; \
397	fi; \
398	list='$(SUBDIRS)'; for subdir in $$list; do \
399	  if test "$$subdir" = .; then :; else \
400	    test ! -f $$subdir/TAGS || \
401	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
402	  fi; \
403	done; \
404	$(am__define_uniq_tagged_files); \
405	shift; \
406	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
407	  test -n "$$unique" || unique=$$empty_fix; \
408	  if test $$# -gt 0; then \
409	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
410	      "$$@" $$unique; \
411	  else \
412	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
413	      $$unique; \
414	  fi; \
415	fi
416ctags: ctags-recursive
417
418CTAGS: ctags
419ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
420	$(am__define_uniq_tagged_files); \
421	test -z "$(CTAGS_ARGS)$$unique" \
422	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
423	     $$unique
424
425GTAGS:
426	here=`$(am__cd) $(top_builddir) && pwd` \
427	  && $(am__cd) $(top_srcdir) \
428	  && gtags -i $(GTAGS_ARGS) "$$here"
429cscopelist: cscopelist-recursive
430
431cscopelist-am: $(am__tagged_files)
432	list='$(am__tagged_files)'; \
433	case "$(srcdir)" in \
434	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
435	  *) sdir=$(subdir)/$(srcdir) ;; \
436	esac; \
437	for i in $$list; do \
438	  if test -f "$$i"; then \
439	    echo "$(subdir)/$$i"; \
440	  else \
441	    echo "$$sdir/$$i"; \
442	  fi; \
443	done >> $(top_builddir)/cscope.files
444
445distclean-tags:
446	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
447
448distdir: $(DISTFILES)
449	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
450	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
451	list='$(DISTFILES)'; \
452	  dist_files=`for file in $$list; do echo $$file; done | \
453	  sed -e "s|^$$srcdirstrip/||;t" \
454	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
455	case $$dist_files in \
456	  */*) $(MKDIR_P) `echo "$$dist_files" | \
457			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
458			   sort -u` ;; \
459	esac; \
460	for file in $$dist_files; do \
461	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
462	  if test -d $$d/$$file; then \
463	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
464	    if test -d "$(distdir)/$$file"; then \
465	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
466	    fi; \
467	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
468	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
469	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
470	    fi; \
471	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
472	  else \
473	    test -f "$(distdir)/$$file" \
474	    || cp -p $$d/$$file "$(distdir)/$$file" \
475	    || exit 1; \
476	  fi; \
477	done
478	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
479	  if test "$$subdir" = .; then :; else \
480	    $(am__make_dryrun) \
481	      || test -d "$(distdir)/$$subdir" \
482	      || $(MKDIR_P) "$(distdir)/$$subdir" \
483	      || exit 1; \
484	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
485	    $(am__relativize); \
486	    new_distdir=$$reldir; \
487	    dir1=$$subdir; dir2="$(top_distdir)"; \
488	    $(am__relativize); \
489	    new_top_distdir=$$reldir; \
490	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
491	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
492	    ($(am__cd) $$subdir && \
493	      $(MAKE) $(AM_MAKEFLAGS) \
494	        top_distdir="$$new_top_distdir" \
495	        distdir="$$new_distdir" \
496		am__remove_distdir=: \
497		am__skip_length_check=: \
498		am__skip_mode_fix=: \
499	        distdir) \
500	      || exit 1; \
501	  fi; \
502	done
503check-am: all-am
504check: check-recursive
505all-am: Makefile
506installdirs: installdirs-recursive
507installdirs-am:
508install: install-recursive
509install-exec: install-exec-recursive
510install-data: install-data-recursive
511uninstall: uninstall-recursive
512
513install-am: all-am
514	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
515
516installcheck: installcheck-recursive
517install-strip:
518	if test -z '$(STRIP)'; then \
519	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
520	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
521	      install; \
522	else \
523	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
524	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
525	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
526	fi
527mostlyclean-generic:
528
529clean-generic:
530
531distclean-generic:
532	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
533	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
534
535maintainer-clean-generic:
536	@echo "This command is intended for maintainers to use"
537	@echo "it deletes files that may require special tools to rebuild."
538clean: clean-recursive
539
540clean-am: clean-generic clean-libtool mostlyclean-am
541
542distclean: distclean-recursive
543	-rm -f Makefile
544distclean-am: clean-am distclean-generic distclean-tags
545
546dvi: dvi-recursive
547
548dvi-am:
549
550html: html-recursive
551
552html-am:
553
554info: info-recursive
555
556info-am:
557
558install-data-am:
559
560install-dvi: install-dvi-recursive
561
562install-dvi-am:
563
564install-exec-am:
565
566install-html: install-html-recursive
567
568install-html-am:
569
570install-info: install-info-recursive
571
572install-info-am:
573
574install-man:
575
576install-pdf: install-pdf-recursive
577
578install-pdf-am:
579
580install-ps: install-ps-recursive
581
582install-ps-am:
583
584installcheck-am:
585
586maintainer-clean: maintainer-clean-recursive
587	-rm -f Makefile
588maintainer-clean-am: distclean-am maintainer-clean-generic
589
590mostlyclean: mostlyclean-recursive
591
592mostlyclean-am: mostlyclean-generic mostlyclean-libtool
593
594pdf: pdf-recursive
595
596pdf-am:
597
598ps: ps-recursive
599
600ps-am:
601
602uninstall-am:
603
604.MAKE: $(am__recursive_targets) install-am install-strip
605
606.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
607	check-am clean clean-generic clean-libtool cscopelist-am ctags \
608	ctags-am distclean distclean-generic distclean-libtool \
609	distclean-tags distdir dvi dvi-am html html-am info info-am \
610	install install-am install-data install-data-am install-dvi \
611	install-dvi-am install-exec install-exec-am install-html \
612	install-html-am install-info install-info-am install-man \
613	install-pdf install-pdf-am install-ps install-ps-am \
614	install-strip installcheck installcheck-am installdirs \
615	installdirs-am maintainer-clean maintainer-clean-generic \
616	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
617	ps ps-am tags tags-am uninstall uninstall-am
618
619.PRECIOUS: Makefile
620
621
622# Tell versions [3.59,3.63) of GNU make to not export all variables.
623# Otherwise a system limit (for SysV at least) may be exceeded.
624.NOEXPORT:
625