1# Makefile.in generated by automake 1.15 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2014 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# $OpenPAM: Makefile.am 938 2017-04-30 21:34:42Z des $ 18VPATH = @srcdir@ 19am__is_gnu_make = { \ 20 if test -z '$(MAKELEVEL)'; then \ 21 false; \ 22 elif test -n '$(MAKE_HOST)'; then \ 23 true; \ 24 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 25 true; \ 26 else \ 27 false; \ 28 fi; \ 29} 30am__make_running_with_option = \ 31 case $${target_option-} in \ 32 ?) ;; \ 33 *) echo "am__make_running_with_option: internal error: invalid" \ 34 "target option '$${target_option-}' specified" >&2; \ 35 exit 1;; \ 36 esac; \ 37 has_opt=no; \ 38 sane_makeflags=$$MAKEFLAGS; \ 39 if $(am__is_gnu_make); then \ 40 sane_makeflags=$$MFLAGS; \ 41 else \ 42 case $$MAKEFLAGS in \ 43 *\\[\ \ ]*) \ 44 bs=\\; \ 45 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 46 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 47 esac; \ 48 fi; \ 49 skip_next=no; \ 50 strip_trailopt () \ 51 { \ 52 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 53 }; \ 54 for flg in $$sane_makeflags; do \ 55 test $$skip_next = yes && { skip_next=no; continue; }; \ 56 case $$flg in \ 57 *=*|--*) continue;; \ 58 -*I) strip_trailopt 'I'; skip_next=yes;; \ 59 -*I?*) strip_trailopt 'I';; \ 60 -*O) strip_trailopt 'O'; skip_next=yes;; \ 61 -*O?*) strip_trailopt 'O';; \ 62 -*l) strip_trailopt 'l'; skip_next=yes;; \ 63 -*l?*) strip_trailopt 'l';; \ 64 -[dEDm]) skip_next=yes;; \ 65 -[JT]) skip_next=yes;; \ 66 esac; \ 67 case $$flg in \ 68 *$$target_option*) has_opt=yes; break;; \ 69 esac; \ 70 done; \ 71 test $$has_opt = yes 72am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 73am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 74pkgdatadir = $(datadir)/@PACKAGE@ 75pkgincludedir = $(includedir)/@PACKAGE@ 76pkglibdir = $(libdir)/@PACKAGE@ 77pkglibexecdir = $(libexecdir)/@PACKAGE@ 78am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 79install_sh_DATA = $(install_sh) -c -m 644 80install_sh_PROGRAM = $(install_sh) -c 81install_sh_SCRIPT = $(install_sh) -c 82INSTALL_HEADER = $(INSTALL_DATA) 83transform = $(program_transform_name) 84NORMAL_INSTALL = : 85PRE_INSTALL = : 86POST_INSTALL = : 87NORMAL_UNINSTALL = : 88PRE_UNINSTALL = : 89POST_UNINSTALL = : 90build_triplet = @build@ 91host_triplet = @host@ 92subdir = doc 93ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 94am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ 95 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 96 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 97 $(top_srcdir)/configure.ac 98am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 99 $(ACLOCAL_M4) 100DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) 101mkinstalldirs = $(install_sh) -d 102CONFIG_HEADER = $(top_builddir)/config.h 103CONFIG_CLEAN_FILES = 104CONFIG_CLEAN_VPATH_FILES = 105AM_V_P = $(am__v_P_@AM_V@) 106am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 107am__v_P_0 = false 108am__v_P_1 = : 109AM_V_GEN = $(am__v_GEN_@AM_V@) 110am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 111am__v_GEN_0 = @echo " GEN " $@; 112am__v_GEN_1 = 113AM_V_at = $(am__v_at_@AM_V@) 114am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 115am__v_at_0 = @ 116am__v_at_1 = 117SOURCES = 118DIST_SOURCES = 119RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 120 ctags-recursive dvi-recursive html-recursive info-recursive \ 121 install-data-recursive install-dvi-recursive \ 122 install-exec-recursive install-html-recursive \ 123 install-info-recursive install-pdf-recursive \ 124 install-ps-recursive install-recursive installcheck-recursive \ 125 installdirs-recursive pdf-recursive ps-recursive \ 126 tags-recursive uninstall-recursive 127am__can_run_installinfo = \ 128 case $$AM_UPDATE_INFO_DIR in \ 129 n|no|NO) false;; \ 130 *) (install-info --version) >/dev/null 2>&1;; \ 131 esac 132RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 133 distclean-recursive maintainer-clean-recursive 134am__recursive_targets = \ 135 $(RECURSIVE_TARGETS) \ 136 $(RECURSIVE_CLEAN_TARGETS) \ 137 $(am__extra_recursive_targets) 138AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 139 distdir 140am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) 141# Read a list of newline-separated strings from the standard input, 142# and print each of them once, without duplicates. Input order is 143# *not* preserved. 144am__uniquify_input = $(AWK) '\ 145 BEGIN { nonempty = 0; } \ 146 { items[$$0] = 1; nonempty = 1; } \ 147 END { if (nonempty) { for (i in items) print i; }; } \ 148' 149# Make sure the list of sources is unique. This is necessary because, 150# e.g., the same source file might be shared among _SOURCES variables 151# for different programs/libraries. 152am__define_uniq_tagged_files = \ 153 list='$(am__tagged_files)'; \ 154 unique=`for i in $$list; do \ 155 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 156 done | $(am__uniquify_input)` 157ETAGS = etags 158CTAGS = ctags 159DIST_SUBDIRS = $(SUBDIRS) 160am__DIST_COMMON = $(srcdir)/Makefile.in 161DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 162am__relativize = \ 163 dir0=`pwd`; \ 164 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 165 sed_rest='s,^[^/]*/*,,'; \ 166 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 167 sed_butlast='s,/*[^/]*$$,,'; \ 168 while test -n "$$dir1"; do \ 169 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 170 if test "$$first" != "."; then \ 171 if test "$$first" = ".."; then \ 172 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 173 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 174 else \ 175 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 176 if test "$$first2" = "$$first"; then \ 177 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 178 else \ 179 dir2="../$$dir2"; \ 180 fi; \ 181 dir0="$$dir0"/"$$first"; \ 182 fi; \ 183 fi; \ 184 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 185 done; \ 186 reldir="$$dir2" 187ACLOCAL = @ACLOCAL@ 188AMTAR = @AMTAR@ 189AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 190AR = @AR@ 191AUTOCONF = @AUTOCONF@ 192AUTOHEADER = @AUTOHEADER@ 193AUTOMAKE = @AUTOMAKE@ 194AWK = @AWK@ 195CC = @CC@ 196CCDEPMODE = @CCDEPMODE@ 197CFLAGS = @CFLAGS@ 198CPP = @CPP@ 199CPPFLAGS = @CPPFLAGS@ 200CRYB_TEST_LIBS = @CRYB_TEST_LIBS@ 201CRYPTO_LIBS = @CRYPTO_LIBS@ 202CRYPT_LIBS = @CRYPT_LIBS@ 203CYGPATH_W = @CYGPATH_W@ 204DEFS = @DEFS@ 205DEPDIR = @DEPDIR@ 206DLLTOOL = @DLLTOOL@ 207DL_LIBS = @DL_LIBS@ 208DSYMUTIL = @DSYMUTIL@ 209DUMPBIN = @DUMPBIN@ 210ECHO_C = @ECHO_C@ 211ECHO_N = @ECHO_N@ 212ECHO_T = @ECHO_T@ 213EGREP = @EGREP@ 214EXEEXT = @EXEEXT@ 215FGREP = @FGREP@ 216GREP = @GREP@ 217INSTALL = @INSTALL@ 218INSTALL_DATA = @INSTALL_DATA@ 219INSTALL_PROGRAM = @INSTALL_PROGRAM@ 220INSTALL_SCRIPT = @INSTALL_SCRIPT@ 221INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 222LD = @LD@ 223LDFLAGS = @LDFLAGS@ 224LIBOBJS = @LIBOBJS@ 225LIBS = @LIBS@ 226LIBTOOL = @LIBTOOL@ 227LIB_MAJ = @LIB_MAJ@ 228LIPO = @LIPO@ 229LN_S = @LN_S@ 230LTLIBOBJS = @LTLIBOBJS@ 231LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 232MAKEINFO = @MAKEINFO@ 233MANIFEST_TOOL = @MANIFEST_TOOL@ 234MKDIR_P = @MKDIR_P@ 235NM = @NM@ 236NMEDIT = @NMEDIT@ 237OBJDUMP = @OBJDUMP@ 238OBJEXT = @OBJEXT@ 239OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@ 240OTOOL = @OTOOL@ 241OTOOL64 = @OTOOL64@ 242PACKAGE = @PACKAGE@ 243PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 244PACKAGE_NAME = @PACKAGE_NAME@ 245PACKAGE_STRING = @PACKAGE_STRING@ 246PACKAGE_TARNAME = @PACKAGE_TARNAME@ 247PACKAGE_URL = @PACKAGE_URL@ 248PACKAGE_VERSION = @PACKAGE_VERSION@ 249PATH_SEPARATOR = @PATH_SEPARATOR@ 250RANLIB = @RANLIB@ 251SED = @SED@ 252SET_MAKE = @SET_MAKE@ 253SHELL = @SHELL@ 254STRIP = @STRIP@ 255SYSTEM_LIBPAM = @SYSTEM_LIBPAM@ 256VERSION = @VERSION@ 257abs_builddir = @abs_builddir@ 258abs_srcdir = @abs_srcdir@ 259abs_top_builddir = @abs_top_builddir@ 260abs_top_srcdir = @abs_top_srcdir@ 261ac_ct_AR = @ac_ct_AR@ 262ac_ct_CC = @ac_ct_CC@ 263ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 264am__include = @am__include@ 265am__leading_dot = @am__leading_dot@ 266am__quote = @am__quote@ 267am__tar = @am__tar@ 268am__untar = @am__untar@ 269bindir = @bindir@ 270build = @build@ 271build_alias = @build_alias@ 272build_cpu = @build_cpu@ 273build_os = @build_os@ 274build_vendor = @build_vendor@ 275builddir = @builddir@ 276datadir = @datadir@ 277datarootdir = @datarootdir@ 278docdir = @docdir@ 279dvidir = @dvidir@ 280exec_prefix = @exec_prefix@ 281host = @host@ 282host_alias = @host_alias@ 283host_cpu = @host_cpu@ 284host_os = @host_os@ 285host_vendor = @host_vendor@ 286htmldir = @htmldir@ 287includedir = @includedir@ 288infodir = @infodir@ 289install_sh = @install_sh@ 290libdir = @libdir@ 291libexecdir = @libexecdir@ 292localedir = @localedir@ 293localstatedir = @localstatedir@ 294mandir = @mandir@ 295mkdir_p = @mkdir_p@ 296oldincludedir = @oldincludedir@ 297pdfdir = @pdfdir@ 298prefix = @prefix@ 299program_transform_name = @program_transform_name@ 300psdir = @psdir@ 301sbindir = @sbindir@ 302sharedstatedir = @sharedstatedir@ 303srcdir = @srcdir@ 304sysconfdir = @sysconfdir@ 305target_alias = @target_alias@ 306top_build_prefix = @top_build_prefix@ 307top_builddir = @top_builddir@ 308top_srcdir = @top_srcdir@ 309SUBDIRS = man 310all: all-recursive 311 312.SUFFIXES: 313$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 314 @for dep in $?; do \ 315 case '$(am__configure_deps)' in \ 316 *$$dep*) \ 317 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 318 && { if test -f $@; then exit 0; else break; fi; }; \ 319 exit 1;; \ 320 esac; \ 321 done; \ 322 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ 323 $(am__cd) $(top_srcdir) && \ 324 $(AUTOMAKE) --foreign doc/Makefile 325Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 326 @case '$?' in \ 327 *config.status*) \ 328 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 329 *) \ 330 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 331 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 332 esac; 333 334$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 335 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 336 337$(top_srcdir)/configure: $(am__configure_deps) 338 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 339$(ACLOCAL_M4): $(am__aclocal_m4_deps) 340 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 341$(am__aclocal_m4_deps): 342 343mostlyclean-libtool: 344 -rm -f *.lo 345 346clean-libtool: 347 -rm -rf .libs _libs 348 349# This directory's subdirectories are mostly independent; you can cd 350# into them and run 'make' without going through this Makefile. 351# To change the values of 'make' variables: instead of editing Makefiles, 352# (1) if the variable is set in 'config.status', edit 'config.status' 353# (which will cause the Makefiles to be regenerated when you run 'make'); 354# (2) otherwise, pass the desired values on the 'make' command line. 355$(am__recursive_targets): 356 @fail=; \ 357 if $(am__make_keepgoing); then \ 358 failcom='fail=yes'; \ 359 else \ 360 failcom='exit 1'; \ 361 fi; \ 362 dot_seen=no; \ 363 target=`echo $@ | sed s/-recursive//`; \ 364 case "$@" in \ 365 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 366 *) list='$(SUBDIRS)' ;; \ 367 esac; \ 368 for subdir in $$list; do \ 369 echo "Making $$target in $$subdir"; \ 370 if test "$$subdir" = "."; then \ 371 dot_seen=yes; \ 372 local_target="$$target-am"; \ 373 else \ 374 local_target="$$target"; \ 375 fi; \ 376 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 377 || eval $$failcom; \ 378 done; \ 379 if test "$$dot_seen" = "no"; then \ 380 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 381 fi; test -z "$$fail" 382 383ID: $(am__tagged_files) 384 $(am__define_uniq_tagged_files); mkid -fID $$unique 385tags: tags-recursive 386TAGS: tags 387 388tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 389 set x; \ 390 here=`pwd`; \ 391 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 392 include_option=--etags-include; \ 393 empty_fix=.; \ 394 else \ 395 include_option=--include; \ 396 empty_fix=; \ 397 fi; \ 398 list='$(SUBDIRS)'; for subdir in $$list; do \ 399 if test "$$subdir" = .; then :; else \ 400 test ! -f $$subdir/TAGS || \ 401 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 402 fi; \ 403 done; \ 404 $(am__define_uniq_tagged_files); \ 405 shift; \ 406 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 407 test -n "$$unique" || unique=$$empty_fix; \ 408 if test $$# -gt 0; then \ 409 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 410 "$$@" $$unique; \ 411 else \ 412 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 413 $$unique; \ 414 fi; \ 415 fi 416ctags: ctags-recursive 417 418CTAGS: ctags 419ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 420 $(am__define_uniq_tagged_files); \ 421 test -z "$(CTAGS_ARGS)$$unique" \ 422 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 423 $$unique 424 425GTAGS: 426 here=`$(am__cd) $(top_builddir) && pwd` \ 427 && $(am__cd) $(top_srcdir) \ 428 && gtags -i $(GTAGS_ARGS) "$$here" 429cscopelist: cscopelist-recursive 430 431cscopelist-am: $(am__tagged_files) 432 list='$(am__tagged_files)'; \ 433 case "$(srcdir)" in \ 434 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 435 *) sdir=$(subdir)/$(srcdir) ;; \ 436 esac; \ 437 for i in $$list; do \ 438 if test -f "$$i"; then \ 439 echo "$(subdir)/$$i"; \ 440 else \ 441 echo "$$sdir/$$i"; \ 442 fi; \ 443 done >> $(top_builddir)/cscope.files 444 445distclean-tags: 446 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 447 448distdir: $(DISTFILES) 449 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 450 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 451 list='$(DISTFILES)'; \ 452 dist_files=`for file in $$list; do echo $$file; done | \ 453 sed -e "s|^$$srcdirstrip/||;t" \ 454 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 455 case $$dist_files in \ 456 */*) $(MKDIR_P) `echo "$$dist_files" | \ 457 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 458 sort -u` ;; \ 459 esac; \ 460 for file in $$dist_files; do \ 461 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 462 if test -d $$d/$$file; then \ 463 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 464 if test -d "$(distdir)/$$file"; then \ 465 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 466 fi; \ 467 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 468 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 469 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 470 fi; \ 471 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 472 else \ 473 test -f "$(distdir)/$$file" \ 474 || cp -p $$d/$$file "$(distdir)/$$file" \ 475 || exit 1; \ 476 fi; \ 477 done 478 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 479 if test "$$subdir" = .; then :; else \ 480 $(am__make_dryrun) \ 481 || test -d "$(distdir)/$$subdir" \ 482 || $(MKDIR_P) "$(distdir)/$$subdir" \ 483 || exit 1; \ 484 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 485 $(am__relativize); \ 486 new_distdir=$$reldir; \ 487 dir1=$$subdir; dir2="$(top_distdir)"; \ 488 $(am__relativize); \ 489 new_top_distdir=$$reldir; \ 490 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 491 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 492 ($(am__cd) $$subdir && \ 493 $(MAKE) $(AM_MAKEFLAGS) \ 494 top_distdir="$$new_top_distdir" \ 495 distdir="$$new_distdir" \ 496 am__remove_distdir=: \ 497 am__skip_length_check=: \ 498 am__skip_mode_fix=: \ 499 distdir) \ 500 || exit 1; \ 501 fi; \ 502 done 503check-am: all-am 504check: check-recursive 505all-am: Makefile 506installdirs: installdirs-recursive 507installdirs-am: 508install: install-recursive 509install-exec: install-exec-recursive 510install-data: install-data-recursive 511uninstall: uninstall-recursive 512 513install-am: all-am 514 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 515 516installcheck: installcheck-recursive 517install-strip: 518 if test -z '$(STRIP)'; then \ 519 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 520 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 521 install; \ 522 else \ 523 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 524 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 525 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 526 fi 527mostlyclean-generic: 528 529clean-generic: 530 531distclean-generic: 532 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 533 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 534 535maintainer-clean-generic: 536 @echo "This command is intended for maintainers to use" 537 @echo "it deletes files that may require special tools to rebuild." 538clean: clean-recursive 539 540clean-am: clean-generic clean-libtool mostlyclean-am 541 542distclean: distclean-recursive 543 -rm -f Makefile 544distclean-am: clean-am distclean-generic distclean-tags 545 546dvi: dvi-recursive 547 548dvi-am: 549 550html: html-recursive 551 552html-am: 553 554info: info-recursive 555 556info-am: 557 558install-data-am: 559 560install-dvi: install-dvi-recursive 561 562install-dvi-am: 563 564install-exec-am: 565 566install-html: install-html-recursive 567 568install-html-am: 569 570install-info: install-info-recursive 571 572install-info-am: 573 574install-man: 575 576install-pdf: install-pdf-recursive 577 578install-pdf-am: 579 580install-ps: install-ps-recursive 581 582install-ps-am: 583 584installcheck-am: 585 586maintainer-clean: maintainer-clean-recursive 587 -rm -f Makefile 588maintainer-clean-am: distclean-am maintainer-clean-generic 589 590mostlyclean: mostlyclean-recursive 591 592mostlyclean-am: mostlyclean-generic mostlyclean-libtool 593 594pdf: pdf-recursive 595 596pdf-am: 597 598ps: ps-recursive 599 600ps-am: 601 602uninstall-am: 603 604.MAKE: $(am__recursive_targets) install-am install-strip 605 606.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ 607 check-am clean clean-generic clean-libtool cscopelist-am ctags \ 608 ctags-am distclean distclean-generic distclean-libtool \ 609 distclean-tags distdir dvi dvi-am html html-am info info-am \ 610 install install-am install-data install-data-am install-dvi \ 611 install-dvi-am install-exec install-exec-am install-html \ 612 install-html-am install-info install-info-am install-man \ 613 install-pdf install-pdf-am install-ps install-ps-am \ 614 install-strip installcheck installcheck-am installdirs \ 615 installdirs-am maintainer-clean maintainer-clean-generic \ 616 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ 617 ps ps-am tags tags-am uninstall uninstall-am 618 619.PRECIOUS: Makefile 620 621 622# Tell versions [3.59,3.63) of GNU make to not export all variables. 623# Otherwise a system limit (for SysV at least) may be exceeded. 624.NOEXPORT: 625