1# Makefile.in generated by automake 1.14 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2013 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# $Id: Makefile.am 648 2013-03-05 17:54:27Z des $ 18VPATH = @srcdir@ 19am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' 20am__make_running_with_option = \ 21 case $${target_option-} in \ 22 ?) ;; \ 23 *) echo "am__make_running_with_option: internal error: invalid" \ 24 "target option '$${target_option-}' specified" >&2; \ 25 exit 1;; \ 26 esac; \ 27 has_opt=no; \ 28 sane_makeflags=$$MAKEFLAGS; \ 29 if $(am__is_gnu_make); then \ 30 sane_makeflags=$$MFLAGS; \ 31 else \ 32 case $$MAKEFLAGS in \ 33 *\\[\ \ ]*) \ 34 bs=\\; \ 35 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 36 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 37 esac; \ 38 fi; \ 39 skip_next=no; \ 40 strip_trailopt () \ 41 { \ 42 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 43 }; \ 44 for flg in $$sane_makeflags; do \ 45 test $$skip_next = yes && { skip_next=no; continue; }; \ 46 case $$flg in \ 47 *=*|--*) continue;; \ 48 -*I) strip_trailopt 'I'; skip_next=yes;; \ 49 -*I?*) strip_trailopt 'I';; \ 50 -*O) strip_trailopt 'O'; skip_next=yes;; \ 51 -*O?*) strip_trailopt 'O';; \ 52 -*l) strip_trailopt 'l'; skip_next=yes;; \ 53 -*l?*) strip_trailopt 'l';; \ 54 -[dEDm]) skip_next=yes;; \ 55 -[JT]) skip_next=yes;; \ 56 esac; \ 57 case $$flg in \ 58 *$$target_option*) has_opt=yes; break;; \ 59 esac; \ 60 done; \ 61 test $$has_opt = yes 62am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 63am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 64pkgdatadir = $(datadir)/@PACKAGE@ 65pkgincludedir = $(includedir)/@PACKAGE@ 66pkglibdir = $(libdir)/@PACKAGE@ 67pkglibexecdir = $(libexecdir)/@PACKAGE@ 68am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 69install_sh_DATA = $(install_sh) -c -m 644 70install_sh_PROGRAM = $(install_sh) -c 71install_sh_SCRIPT = $(install_sh) -c 72INSTALL_HEADER = $(INSTALL_DATA) 73transform = $(program_transform_name) 74NORMAL_INSTALL = : 75PRE_INSTALL = : 76POST_INSTALL = : 77NORMAL_UNINSTALL = : 78PRE_UNINSTALL = : 79POST_UNINSTALL = : 80build_triplet = @build@ 81host_triplet = @host@ 82subdir = doc 83DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am 84ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 85am__aclocal_m4_deps = $(top_srcdir)/configure.ac 86am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 87 $(ACLOCAL_M4) 88mkinstalldirs = $(install_sh) -d 89CONFIG_HEADER = $(top_builddir)/config.h 90CONFIG_CLEAN_FILES = 91CONFIG_CLEAN_VPATH_FILES = 92AM_V_P = $(am__v_P_@AM_V@) 93am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 94am__v_P_0 = false 95am__v_P_1 = : 96AM_V_GEN = $(am__v_GEN_@AM_V@) 97am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 98am__v_GEN_0 = @echo " GEN " $@; 99am__v_GEN_1 = 100AM_V_at = $(am__v_at_@AM_V@) 101am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 102am__v_at_0 = @ 103am__v_at_1 = 104SOURCES = 105DIST_SOURCES = 106RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 107 ctags-recursive dvi-recursive html-recursive info-recursive \ 108 install-data-recursive install-dvi-recursive \ 109 install-exec-recursive install-html-recursive \ 110 install-info-recursive install-pdf-recursive \ 111 install-ps-recursive install-recursive installcheck-recursive \ 112 installdirs-recursive pdf-recursive ps-recursive \ 113 tags-recursive uninstall-recursive 114am__can_run_installinfo = \ 115 case $$AM_UPDATE_INFO_DIR in \ 116 n|no|NO) false;; \ 117 *) (install-info --version) >/dev/null 2>&1;; \ 118 esac 119RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 120 distclean-recursive maintainer-clean-recursive 121am__recursive_targets = \ 122 $(RECURSIVE_TARGETS) \ 123 $(RECURSIVE_CLEAN_TARGETS) \ 124 $(am__extra_recursive_targets) 125AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 126 distdir 127am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) 128# Read a list of newline-separated strings from the standard input, 129# and print each of them once, without duplicates. Input order is 130# *not* preserved. 131am__uniquify_input = $(AWK) '\ 132 BEGIN { nonempty = 0; } \ 133 { items[$$0] = 1; nonempty = 1; } \ 134 END { if (nonempty) { for (i in items) print i; }; } \ 135' 136# Make sure the list of sources is unique. This is necessary because, 137# e.g., the same source file might be shared among _SOURCES variables 138# for different programs/libraries. 139am__define_uniq_tagged_files = \ 140 list='$(am__tagged_files)'; \ 141 unique=`for i in $$list; do \ 142 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 143 done | $(am__uniquify_input)` 144ETAGS = etags 145CTAGS = ctags 146DIST_SUBDIRS = $(SUBDIRS) 147DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 148am__relativize = \ 149 dir0=`pwd`; \ 150 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 151 sed_rest='s,^[^/]*/*,,'; \ 152 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 153 sed_butlast='s,/*[^/]*$$,,'; \ 154 while test -n "$$dir1"; do \ 155 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 156 if test "$$first" != "."; then \ 157 if test "$$first" = ".."; then \ 158 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 159 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 160 else \ 161 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 162 if test "$$first2" = "$$first"; then \ 163 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 164 else \ 165 dir2="../$$dir2"; \ 166 fi; \ 167 dir0="$$dir0"/"$$first"; \ 168 fi; \ 169 fi; \ 170 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 171 done; \ 172 reldir="$$dir2" 173ACLOCAL = @ACLOCAL@ 174AMTAR = @AMTAR@ 175AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 176AR = @AR@ 177AUTOCONF = @AUTOCONF@ 178AUTOHEADER = @AUTOHEADER@ 179AUTOMAKE = @AUTOMAKE@ 180AWK = @AWK@ 181CC = @CC@ 182CCDEPMODE = @CCDEPMODE@ 183CFLAGS = @CFLAGS@ 184CPP = @CPP@ 185CPPFLAGS = @CPPFLAGS@ 186CRYPTO_LIBS = @CRYPTO_LIBS@ 187CRYPT_LIBS = @CRYPT_LIBS@ 188CYGPATH_W = @CYGPATH_W@ 189DEFS = @DEFS@ 190DEPDIR = @DEPDIR@ 191DLLTOOL = @DLLTOOL@ 192DL_LIBS = @DL_LIBS@ 193DSYMUTIL = @DSYMUTIL@ 194DUMPBIN = @DUMPBIN@ 195ECHO_C = @ECHO_C@ 196ECHO_N = @ECHO_N@ 197ECHO_T = @ECHO_T@ 198EGREP = @EGREP@ 199EXEEXT = @EXEEXT@ 200FGREP = @FGREP@ 201GREP = @GREP@ 202INSTALL = @INSTALL@ 203INSTALL_DATA = @INSTALL_DATA@ 204INSTALL_PROGRAM = @INSTALL_PROGRAM@ 205INSTALL_SCRIPT = @INSTALL_SCRIPT@ 206INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 207LD = @LD@ 208LDFLAGS = @LDFLAGS@ 209LIBOBJS = @LIBOBJS@ 210LIBS = @LIBS@ 211LIBTOOL = @LIBTOOL@ 212LIB_MAJ = @LIB_MAJ@ 213LIPO = @LIPO@ 214LN_S = @LN_S@ 215LTLIBOBJS = @LTLIBOBJS@ 216MAKEINFO = @MAKEINFO@ 217MANIFEST_TOOL = @MANIFEST_TOOL@ 218MKDIR_P = @MKDIR_P@ 219NM = @NM@ 220NMEDIT = @NMEDIT@ 221OBJDUMP = @OBJDUMP@ 222OBJEXT = @OBJEXT@ 223OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@ 224OTOOL = @OTOOL@ 225OTOOL64 = @OTOOL64@ 226PACKAGE = @PACKAGE@ 227PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 228PACKAGE_NAME = @PACKAGE_NAME@ 229PACKAGE_STRING = @PACKAGE_STRING@ 230PACKAGE_TARNAME = @PACKAGE_TARNAME@ 231PACKAGE_URL = @PACKAGE_URL@ 232PACKAGE_VERSION = @PACKAGE_VERSION@ 233PATH_SEPARATOR = @PATH_SEPARATOR@ 234RANLIB = @RANLIB@ 235SED = @SED@ 236SET_MAKE = @SET_MAKE@ 237SHELL = @SHELL@ 238STRIP = @STRIP@ 239VERSION = @VERSION@ 240abs_builddir = @abs_builddir@ 241abs_srcdir = @abs_srcdir@ 242abs_top_builddir = @abs_top_builddir@ 243abs_top_srcdir = @abs_top_srcdir@ 244ac_ct_AR = @ac_ct_AR@ 245ac_ct_CC = @ac_ct_CC@ 246ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 247am__include = @am__include@ 248am__leading_dot = @am__leading_dot@ 249am__quote = @am__quote@ 250am__tar = @am__tar@ 251am__untar = @am__untar@ 252bindir = @bindir@ 253build = @build@ 254build_alias = @build_alias@ 255build_cpu = @build_cpu@ 256build_os = @build_os@ 257build_vendor = @build_vendor@ 258builddir = @builddir@ 259datadir = @datadir@ 260datarootdir = @datarootdir@ 261docdir = @docdir@ 262dvidir = @dvidir@ 263exec_prefix = @exec_prefix@ 264host = @host@ 265host_alias = @host_alias@ 266host_cpu = @host_cpu@ 267host_os = @host_os@ 268host_vendor = @host_vendor@ 269htmldir = @htmldir@ 270includedir = @includedir@ 271infodir = @infodir@ 272install_sh = @install_sh@ 273libdir = @libdir@ 274libexecdir = @libexecdir@ 275localedir = @localedir@ 276localstatedir = @localstatedir@ 277mandir = @mandir@ 278mkdir_p = @mkdir_p@ 279oldincludedir = @oldincludedir@ 280pdfdir = @pdfdir@ 281prefix = @prefix@ 282program_transform_name = @program_transform_name@ 283psdir = @psdir@ 284sbindir = @sbindir@ 285sharedstatedir = @sharedstatedir@ 286srcdir = @srcdir@ 287sysconfdir = @sysconfdir@ 288target_alias = @target_alias@ 289top_build_prefix = @top_build_prefix@ 290top_builddir = @top_builddir@ 291top_srcdir = @top_srcdir@ 292SUBDIRS = man 293all: all-recursive 294 295.SUFFIXES: 296$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 297 @for dep in $?; do \ 298 case '$(am__configure_deps)' in \ 299 *$$dep*) \ 300 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 301 && { if test -f $@; then exit 0; else break; fi; }; \ 302 exit 1;; \ 303 esac; \ 304 done; \ 305 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ 306 $(am__cd) $(top_srcdir) && \ 307 $(AUTOMAKE) --foreign doc/Makefile 308.PRECIOUS: Makefile 309Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 310 @case '$?' in \ 311 *config.status*) \ 312 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 313 *) \ 314 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 315 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 316 esac; 317 318$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 319 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 320 321$(top_srcdir)/configure: $(am__configure_deps) 322 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 323$(ACLOCAL_M4): $(am__aclocal_m4_deps) 324 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 325$(am__aclocal_m4_deps): 326 327mostlyclean-libtool: 328 -rm -f *.lo 329 330clean-libtool: 331 -rm -rf .libs _libs 332 333# This directory's subdirectories are mostly independent; you can cd 334# into them and run 'make' without going through this Makefile. 335# To change the values of 'make' variables: instead of editing Makefiles, 336# (1) if the variable is set in 'config.status', edit 'config.status' 337# (which will cause the Makefiles to be regenerated when you run 'make'); 338# (2) otherwise, pass the desired values on the 'make' command line. 339$(am__recursive_targets): 340 @fail=; \ 341 if $(am__make_keepgoing); then \ 342 failcom='fail=yes'; \ 343 else \ 344 failcom='exit 1'; \ 345 fi; \ 346 dot_seen=no; \ 347 target=`echo $@ | sed s/-recursive//`; \ 348 case "$@" in \ 349 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 350 *) list='$(SUBDIRS)' ;; \ 351 esac; \ 352 for subdir in $$list; do \ 353 echo "Making $$target in $$subdir"; \ 354 if test "$$subdir" = "."; then \ 355 dot_seen=yes; \ 356 local_target="$$target-am"; \ 357 else \ 358 local_target="$$target"; \ 359 fi; \ 360 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 361 || eval $$failcom; \ 362 done; \ 363 if test "$$dot_seen" = "no"; then \ 364 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 365 fi; test -z "$$fail" 366 367ID: $(am__tagged_files) 368 $(am__define_uniq_tagged_files); mkid -fID $$unique 369tags: tags-recursive 370TAGS: tags 371 372tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 373 set x; \ 374 here=`pwd`; \ 375 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 376 include_option=--etags-include; \ 377 empty_fix=.; \ 378 else \ 379 include_option=--include; \ 380 empty_fix=; \ 381 fi; \ 382 list='$(SUBDIRS)'; for subdir in $$list; do \ 383 if test "$$subdir" = .; then :; else \ 384 test ! -f $$subdir/TAGS || \ 385 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 386 fi; \ 387 done; \ 388 $(am__define_uniq_tagged_files); \ 389 shift; \ 390 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 391 test -n "$$unique" || unique=$$empty_fix; \ 392 if test $$# -gt 0; then \ 393 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 394 "$$@" $$unique; \ 395 else \ 396 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 397 $$unique; \ 398 fi; \ 399 fi 400ctags: ctags-recursive 401 402CTAGS: ctags 403ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 404 $(am__define_uniq_tagged_files); \ 405 test -z "$(CTAGS_ARGS)$$unique" \ 406 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 407 $$unique 408 409GTAGS: 410 here=`$(am__cd) $(top_builddir) && pwd` \ 411 && $(am__cd) $(top_srcdir) \ 412 && gtags -i $(GTAGS_ARGS) "$$here" 413cscopelist: cscopelist-recursive 414 415cscopelist-am: $(am__tagged_files) 416 list='$(am__tagged_files)'; \ 417 case "$(srcdir)" in \ 418 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 419 *) sdir=$(subdir)/$(srcdir) ;; \ 420 esac; \ 421 for i in $$list; do \ 422 if test -f "$$i"; then \ 423 echo "$(subdir)/$$i"; \ 424 else \ 425 echo "$$sdir/$$i"; \ 426 fi; \ 427 done >> $(top_builddir)/cscope.files 428 429distclean-tags: 430 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 431 432distdir: $(DISTFILES) 433 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 434 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 435 list='$(DISTFILES)'; \ 436 dist_files=`for file in $$list; do echo $$file; done | \ 437 sed -e "s|^$$srcdirstrip/||;t" \ 438 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 439 case $$dist_files in \ 440 */*) $(MKDIR_P) `echo "$$dist_files" | \ 441 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 442 sort -u` ;; \ 443 esac; \ 444 for file in $$dist_files; do \ 445 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 446 if test -d $$d/$$file; then \ 447 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 448 if test -d "$(distdir)/$$file"; then \ 449 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 450 fi; \ 451 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 452 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 453 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 454 fi; \ 455 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 456 else \ 457 test -f "$(distdir)/$$file" \ 458 || cp -p $$d/$$file "$(distdir)/$$file" \ 459 || exit 1; \ 460 fi; \ 461 done 462 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 463 if test "$$subdir" = .; then :; else \ 464 $(am__make_dryrun) \ 465 || test -d "$(distdir)/$$subdir" \ 466 || $(MKDIR_P) "$(distdir)/$$subdir" \ 467 || exit 1; \ 468 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 469 $(am__relativize); \ 470 new_distdir=$$reldir; \ 471 dir1=$$subdir; dir2="$(top_distdir)"; \ 472 $(am__relativize); \ 473 new_top_distdir=$$reldir; \ 474 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 475 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 476 ($(am__cd) $$subdir && \ 477 $(MAKE) $(AM_MAKEFLAGS) \ 478 top_distdir="$$new_top_distdir" \ 479 distdir="$$new_distdir" \ 480 am__remove_distdir=: \ 481 am__skip_length_check=: \ 482 am__skip_mode_fix=: \ 483 distdir) \ 484 || exit 1; \ 485 fi; \ 486 done 487check-am: all-am 488check: check-recursive 489all-am: Makefile 490installdirs: installdirs-recursive 491installdirs-am: 492install: install-recursive 493install-exec: install-exec-recursive 494install-data: install-data-recursive 495uninstall: uninstall-recursive 496 497install-am: all-am 498 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 499 500installcheck: installcheck-recursive 501install-strip: 502 if test -z '$(STRIP)'; then \ 503 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 504 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 505 install; \ 506 else \ 507 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 508 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 509 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 510 fi 511mostlyclean-generic: 512 513clean-generic: 514 515distclean-generic: 516 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 517 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 518 519maintainer-clean-generic: 520 @echo "This command is intended for maintainers to use" 521 @echo "it deletes files that may require special tools to rebuild." 522clean: clean-recursive 523 524clean-am: clean-generic clean-libtool mostlyclean-am 525 526distclean: distclean-recursive 527 -rm -f Makefile 528distclean-am: clean-am distclean-generic distclean-tags 529 530dvi: dvi-recursive 531 532dvi-am: 533 534html: html-recursive 535 536html-am: 537 538info: info-recursive 539 540info-am: 541 542install-data-am: 543 544install-dvi: install-dvi-recursive 545 546install-dvi-am: 547 548install-exec-am: 549 550install-html: install-html-recursive 551 552install-html-am: 553 554install-info: install-info-recursive 555 556install-info-am: 557 558install-man: 559 560install-pdf: install-pdf-recursive 561 562install-pdf-am: 563 564install-ps: install-ps-recursive 565 566install-ps-am: 567 568installcheck-am: 569 570maintainer-clean: maintainer-clean-recursive 571 -rm -f Makefile 572maintainer-clean-am: distclean-am maintainer-clean-generic 573 574mostlyclean: mostlyclean-recursive 575 576mostlyclean-am: mostlyclean-generic mostlyclean-libtool 577 578pdf: pdf-recursive 579 580pdf-am: 581 582ps: ps-recursive 583 584ps-am: 585 586uninstall-am: 587 588.MAKE: $(am__recursive_targets) install-am install-strip 589 590.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ 591 check-am clean clean-generic clean-libtool cscopelist-am ctags \ 592 ctags-am distclean distclean-generic distclean-libtool \ 593 distclean-tags distdir dvi dvi-am html html-am info info-am \ 594 install install-am install-data install-data-am install-dvi \ 595 install-dvi-am install-exec install-exec-am install-html \ 596 install-html-am install-info install-info-am install-man \ 597 install-pdf install-pdf-am install-ps install-ps-am \ 598 install-strip installcheck installcheck-am installdirs \ 599 installdirs-am maintainer-clean maintainer-clean-generic \ 600 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ 601 ps ps-am tags tags-am uninstall uninstall-am 602 603 604# Tell versions [3.59,3.63) of GNU make to not export all variables. 605# Otherwise a system limit (for SysV at least) may be exceeded. 606.NOEXPORT: 607