1# Makefile.in generated by automake 1.14 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2013 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# $Id: Makefile.am 648 2013-03-05 17:54:27Z des $ 18VPATH = @srcdir@ 19am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)' 20am__make_running_with_option = \ 21 case $${target_option-} in \ 22 ?) ;; \ 23 *) echo "am__make_running_with_option: internal error: invalid" \ 24 "target option '$${target_option-}' specified" >&2; \ 25 exit 1;; \ 26 esac; \ 27 has_opt=no; \ 28 sane_makeflags=$$MAKEFLAGS; \ 29 if $(am__is_gnu_make); then \ 30 sane_makeflags=$$MFLAGS; \ 31 else \ 32 case $$MAKEFLAGS in \ 33 *\\[\ \ ]*) \ 34 bs=\\; \ 35 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 36 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 37 esac; \ 38 fi; \ 39 skip_next=no; \ 40 strip_trailopt () \ 41 { \ 42 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 43 }; \ 44 for flg in $$sane_makeflags; do \ 45 test $$skip_next = yes && { skip_next=no; continue; }; \ 46 case $$flg in \ 47 *=*|--*) continue;; \ 48 -*I) strip_trailopt 'I'; skip_next=yes;; \ 49 -*I?*) strip_trailopt 'I';; \ 50 -*O) strip_trailopt 'O'; skip_next=yes;; \ 51 -*O?*) strip_trailopt 'O';; \ 52 -*l) strip_trailopt 'l'; skip_next=yes;; \ 53 -*l?*) strip_trailopt 'l';; \ 54 -[dEDm]) skip_next=yes;; \ 55 -[JT]) skip_next=yes;; \ 56 esac; \ 57 case $$flg in \ 58 *$$target_option*) has_opt=yes; break;; \ 59 esac; \ 60 done; \ 61 test $$has_opt = yes 62am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 63am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 64pkgdatadir = $(datadir)/@PACKAGE@ 65pkgincludedir = $(includedir)/@PACKAGE@ 66pkglibdir = $(libdir)/@PACKAGE@ 67pkglibexecdir = $(libexecdir)/@PACKAGE@ 68am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 69install_sh_DATA = $(install_sh) -c -m 644 70install_sh_PROGRAM = $(install_sh) -c 71install_sh_SCRIPT = $(install_sh) -c 72INSTALL_HEADER = $(INSTALL_DATA) 73transform = $(program_transform_name) 74NORMAL_INSTALL = : 75PRE_INSTALL = : 76POST_INSTALL = : 77NORMAL_UNINSTALL = : 78PRE_UNINSTALL = : 79POST_UNINSTALL = : 80build_triplet = @build@ 81host_triplet = @host@ 82@WITH_PAMTEST_TRUE@am__append_1 = pamtest 83@WITH_SU_TRUE@am__append_2 = su 84subdir = bin 85DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am 86ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 87am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ 88 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 89 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 90 $(top_srcdir)/configure.ac 91am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 92 $(ACLOCAL_M4) 93mkinstalldirs = $(install_sh) -d 94CONFIG_HEADER = $(top_builddir)/config.h 95CONFIG_CLEAN_FILES = 96CONFIG_CLEAN_VPATH_FILES = 97AM_V_P = $(am__v_P_@AM_V@) 98am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 99am__v_P_0 = false 100am__v_P_1 = : 101AM_V_GEN = $(am__v_GEN_@AM_V@) 102am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 103am__v_GEN_0 = @echo " GEN " $@; 104am__v_GEN_1 = 105AM_V_at = $(am__v_at_@AM_V@) 106am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 107am__v_at_0 = @ 108am__v_at_1 = 109SOURCES = 110DIST_SOURCES = 111RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 112 ctags-recursive dvi-recursive html-recursive info-recursive \ 113 install-data-recursive install-dvi-recursive \ 114 install-exec-recursive install-html-recursive \ 115 install-info-recursive install-pdf-recursive \ 116 install-ps-recursive install-recursive installcheck-recursive \ 117 installdirs-recursive pdf-recursive ps-recursive \ 118 tags-recursive uninstall-recursive 119am__can_run_installinfo = \ 120 case $$AM_UPDATE_INFO_DIR in \ 121 n|no|NO) false;; \ 122 *) (install-info --version) >/dev/null 2>&1;; \ 123 esac 124RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 125 distclean-recursive maintainer-clean-recursive 126am__recursive_targets = \ 127 $(RECURSIVE_TARGETS) \ 128 $(RECURSIVE_CLEAN_TARGETS) \ 129 $(am__extra_recursive_targets) 130AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 131 distdir 132am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) 133# Read a list of newline-separated strings from the standard input, 134# and print each of them once, without duplicates. Input order is 135# *not* preserved. 136am__uniquify_input = $(AWK) '\ 137 BEGIN { nonempty = 0; } \ 138 { items[$$0] = 1; nonempty = 1; } \ 139 END { if (nonempty) { for (i in items) print i; }; } \ 140' 141# Make sure the list of sources is unique. This is necessary because, 142# e.g., the same source file might be shared among _SOURCES variables 143# for different programs/libraries. 144am__define_uniq_tagged_files = \ 145 list='$(am__tagged_files)'; \ 146 unique=`for i in $$list; do \ 147 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 148 done | $(am__uniquify_input)` 149ETAGS = etags 150CTAGS = ctags 151DIST_SUBDIRS = openpam_dump_policy pamtest su 152DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 153am__relativize = \ 154 dir0=`pwd`; \ 155 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 156 sed_rest='s,^[^/]*/*,,'; \ 157 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 158 sed_butlast='s,/*[^/]*$$,,'; \ 159 while test -n "$$dir1"; do \ 160 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 161 if test "$$first" != "."; then \ 162 if test "$$first" = ".."; then \ 163 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 164 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 165 else \ 166 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 167 if test "$$first2" = "$$first"; then \ 168 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 169 else \ 170 dir2="../$$dir2"; \ 171 fi; \ 172 dir0="$$dir0"/"$$first"; \ 173 fi; \ 174 fi; \ 175 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 176 done; \ 177 reldir="$$dir2" 178ACLOCAL = @ACLOCAL@ 179AMTAR = @AMTAR@ 180AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 181AR = @AR@ 182AUTOCONF = @AUTOCONF@ 183AUTOHEADER = @AUTOHEADER@ 184AUTOMAKE = @AUTOMAKE@ 185AWK = @AWK@ 186CC = @CC@ 187CCDEPMODE = @CCDEPMODE@ 188CFLAGS = @CFLAGS@ 189CPP = @CPP@ 190CPPFLAGS = @CPPFLAGS@ 191CRYPTO_LIBS = @CRYPTO_LIBS@ 192CRYPT_LIBS = @CRYPT_LIBS@ 193CYGPATH_W = @CYGPATH_W@ 194DEFS = @DEFS@ 195DEPDIR = @DEPDIR@ 196DLLTOOL = @DLLTOOL@ 197DL_LIBS = @DL_LIBS@ 198DSYMUTIL = @DSYMUTIL@ 199DUMPBIN = @DUMPBIN@ 200ECHO_C = @ECHO_C@ 201ECHO_N = @ECHO_N@ 202ECHO_T = @ECHO_T@ 203EGREP = @EGREP@ 204EXEEXT = @EXEEXT@ 205FGREP = @FGREP@ 206GREP = @GREP@ 207INSTALL = @INSTALL@ 208INSTALL_DATA = @INSTALL_DATA@ 209INSTALL_PROGRAM = @INSTALL_PROGRAM@ 210INSTALL_SCRIPT = @INSTALL_SCRIPT@ 211INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 212LD = @LD@ 213LDFLAGS = @LDFLAGS@ 214LIBOBJS = @LIBOBJS@ 215LIBS = @LIBS@ 216LIBTOOL = @LIBTOOL@ 217LIB_MAJ = @LIB_MAJ@ 218LIPO = @LIPO@ 219LN_S = @LN_S@ 220LTLIBOBJS = @LTLIBOBJS@ 221MAKEINFO = @MAKEINFO@ 222MANIFEST_TOOL = @MANIFEST_TOOL@ 223MKDIR_P = @MKDIR_P@ 224NM = @NM@ 225NMEDIT = @NMEDIT@ 226OBJDUMP = @OBJDUMP@ 227OBJEXT = @OBJEXT@ 228OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@ 229OTOOL = @OTOOL@ 230OTOOL64 = @OTOOL64@ 231PACKAGE = @PACKAGE@ 232PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 233PACKAGE_NAME = @PACKAGE_NAME@ 234PACKAGE_STRING = @PACKAGE_STRING@ 235PACKAGE_TARNAME = @PACKAGE_TARNAME@ 236PACKAGE_URL = @PACKAGE_URL@ 237PACKAGE_VERSION = @PACKAGE_VERSION@ 238PATH_SEPARATOR = @PATH_SEPARATOR@ 239RANLIB = @RANLIB@ 240SED = @SED@ 241SET_MAKE = @SET_MAKE@ 242SHELL = @SHELL@ 243STRIP = @STRIP@ 244VERSION = @VERSION@ 245abs_builddir = @abs_builddir@ 246abs_srcdir = @abs_srcdir@ 247abs_top_builddir = @abs_top_builddir@ 248abs_top_srcdir = @abs_top_srcdir@ 249ac_ct_AR = @ac_ct_AR@ 250ac_ct_CC = @ac_ct_CC@ 251ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 252am__include = @am__include@ 253am__leading_dot = @am__leading_dot@ 254am__quote = @am__quote@ 255am__tar = @am__tar@ 256am__untar = @am__untar@ 257bindir = @bindir@ 258build = @build@ 259build_alias = @build_alias@ 260build_cpu = @build_cpu@ 261build_os = @build_os@ 262build_vendor = @build_vendor@ 263builddir = @builddir@ 264datadir = @datadir@ 265datarootdir = @datarootdir@ 266docdir = @docdir@ 267dvidir = @dvidir@ 268exec_prefix = @exec_prefix@ 269host = @host@ 270host_alias = @host_alias@ 271host_cpu = @host_cpu@ 272host_os = @host_os@ 273host_vendor = @host_vendor@ 274htmldir = @htmldir@ 275includedir = @includedir@ 276infodir = @infodir@ 277install_sh = @install_sh@ 278libdir = @libdir@ 279libexecdir = @libexecdir@ 280localedir = @localedir@ 281localstatedir = @localstatedir@ 282mandir = @mandir@ 283mkdir_p = @mkdir_p@ 284oldincludedir = @oldincludedir@ 285pdfdir = @pdfdir@ 286prefix = @prefix@ 287program_transform_name = @program_transform_name@ 288psdir = @psdir@ 289sbindir = @sbindir@ 290sharedstatedir = @sharedstatedir@ 291srcdir = @srcdir@ 292sysconfdir = @sysconfdir@ 293target_alias = @target_alias@ 294top_build_prefix = @top_build_prefix@ 295top_builddir = @top_builddir@ 296top_srcdir = @top_srcdir@ 297SUBDIRS = openpam_dump_policy $(am__append_1) $(am__append_2) 298all: all-recursive 299 300.SUFFIXES: 301$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) 302 @for dep in $?; do \ 303 case '$(am__configure_deps)' in \ 304 *$$dep*) \ 305 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ 306 && { if test -f $@; then exit 0; else break; fi; }; \ 307 exit 1;; \ 308 esac; \ 309 done; \ 310 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/Makefile'; \ 311 $(am__cd) $(top_srcdir) && \ 312 $(AUTOMAKE) --foreign bin/Makefile 313.PRECIOUS: Makefile 314Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 315 @case '$?' in \ 316 *config.status*) \ 317 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ 318 *) \ 319 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ 320 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ 321 esac; 322 323$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 324 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 325 326$(top_srcdir)/configure: $(am__configure_deps) 327 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 328$(ACLOCAL_M4): $(am__aclocal_m4_deps) 329 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh 330$(am__aclocal_m4_deps): 331 332mostlyclean-libtool: 333 -rm -f *.lo 334 335clean-libtool: 336 -rm -rf .libs _libs 337 338# This directory's subdirectories are mostly independent; you can cd 339# into them and run 'make' without going through this Makefile. 340# To change the values of 'make' variables: instead of editing Makefiles, 341# (1) if the variable is set in 'config.status', edit 'config.status' 342# (which will cause the Makefiles to be regenerated when you run 'make'); 343# (2) otherwise, pass the desired values on the 'make' command line. 344$(am__recursive_targets): 345 @fail=; \ 346 if $(am__make_keepgoing); then \ 347 failcom='fail=yes'; \ 348 else \ 349 failcom='exit 1'; \ 350 fi; \ 351 dot_seen=no; \ 352 target=`echo $@ | sed s/-recursive//`; \ 353 case "$@" in \ 354 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 355 *) list='$(SUBDIRS)' ;; \ 356 esac; \ 357 for subdir in $$list; do \ 358 echo "Making $$target in $$subdir"; \ 359 if test "$$subdir" = "."; then \ 360 dot_seen=yes; \ 361 local_target="$$target-am"; \ 362 else \ 363 local_target="$$target"; \ 364 fi; \ 365 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 366 || eval $$failcom; \ 367 done; \ 368 if test "$$dot_seen" = "no"; then \ 369 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 370 fi; test -z "$$fail" 371 372ID: $(am__tagged_files) 373 $(am__define_uniq_tagged_files); mkid -fID $$unique 374tags: tags-recursive 375TAGS: tags 376 377tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 378 set x; \ 379 here=`pwd`; \ 380 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 381 include_option=--etags-include; \ 382 empty_fix=.; \ 383 else \ 384 include_option=--include; \ 385 empty_fix=; \ 386 fi; \ 387 list='$(SUBDIRS)'; for subdir in $$list; do \ 388 if test "$$subdir" = .; then :; else \ 389 test ! -f $$subdir/TAGS || \ 390 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 391 fi; \ 392 done; \ 393 $(am__define_uniq_tagged_files); \ 394 shift; \ 395 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 396 test -n "$$unique" || unique=$$empty_fix; \ 397 if test $$# -gt 0; then \ 398 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 399 "$$@" $$unique; \ 400 else \ 401 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 402 $$unique; \ 403 fi; \ 404 fi 405ctags: ctags-recursive 406 407CTAGS: ctags 408ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 409 $(am__define_uniq_tagged_files); \ 410 test -z "$(CTAGS_ARGS)$$unique" \ 411 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 412 $$unique 413 414GTAGS: 415 here=`$(am__cd) $(top_builddir) && pwd` \ 416 && $(am__cd) $(top_srcdir) \ 417 && gtags -i $(GTAGS_ARGS) "$$here" 418cscopelist: cscopelist-recursive 419 420cscopelist-am: $(am__tagged_files) 421 list='$(am__tagged_files)'; \ 422 case "$(srcdir)" in \ 423 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 424 *) sdir=$(subdir)/$(srcdir) ;; \ 425 esac; \ 426 for i in $$list; do \ 427 if test -f "$$i"; then \ 428 echo "$(subdir)/$$i"; \ 429 else \ 430 echo "$$sdir/$$i"; \ 431 fi; \ 432 done >> $(top_builddir)/cscope.files 433 434distclean-tags: 435 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 436 437distdir: $(DISTFILES) 438 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 439 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 440 list='$(DISTFILES)'; \ 441 dist_files=`for file in $$list; do echo $$file; done | \ 442 sed -e "s|^$$srcdirstrip/||;t" \ 443 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 444 case $$dist_files in \ 445 */*) $(MKDIR_P) `echo "$$dist_files" | \ 446 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 447 sort -u` ;; \ 448 esac; \ 449 for file in $$dist_files; do \ 450 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 451 if test -d $$d/$$file; then \ 452 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 453 if test -d "$(distdir)/$$file"; then \ 454 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 455 fi; \ 456 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 457 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 458 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 459 fi; \ 460 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 461 else \ 462 test -f "$(distdir)/$$file" \ 463 || cp -p $$d/$$file "$(distdir)/$$file" \ 464 || exit 1; \ 465 fi; \ 466 done 467 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 468 if test "$$subdir" = .; then :; else \ 469 $(am__make_dryrun) \ 470 || test -d "$(distdir)/$$subdir" \ 471 || $(MKDIR_P) "$(distdir)/$$subdir" \ 472 || exit 1; \ 473 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 474 $(am__relativize); \ 475 new_distdir=$$reldir; \ 476 dir1=$$subdir; dir2="$(top_distdir)"; \ 477 $(am__relativize); \ 478 new_top_distdir=$$reldir; \ 479 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 480 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 481 ($(am__cd) $$subdir && \ 482 $(MAKE) $(AM_MAKEFLAGS) \ 483 top_distdir="$$new_top_distdir" \ 484 distdir="$$new_distdir" \ 485 am__remove_distdir=: \ 486 am__skip_length_check=: \ 487 am__skip_mode_fix=: \ 488 distdir) \ 489 || exit 1; \ 490 fi; \ 491 done 492check-am: all-am 493check: check-recursive 494all-am: Makefile 495installdirs: installdirs-recursive 496installdirs-am: 497install: install-recursive 498install-exec: install-exec-recursive 499install-data: install-data-recursive 500uninstall: uninstall-recursive 501 502install-am: all-am 503 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 504 505installcheck: installcheck-recursive 506install-strip: 507 if test -z '$(STRIP)'; then \ 508 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 509 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 510 install; \ 511 else \ 512 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 513 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 514 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 515 fi 516mostlyclean-generic: 517 518clean-generic: 519 520distclean-generic: 521 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 522 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 523 524maintainer-clean-generic: 525 @echo "This command is intended for maintainers to use" 526 @echo "it deletes files that may require special tools to rebuild." 527clean: clean-recursive 528 529clean-am: clean-generic clean-libtool mostlyclean-am 530 531distclean: distclean-recursive 532 -rm -f Makefile 533distclean-am: clean-am distclean-generic distclean-tags 534 535dvi: dvi-recursive 536 537dvi-am: 538 539html: html-recursive 540 541html-am: 542 543info: info-recursive 544 545info-am: 546 547install-data-am: 548 549install-dvi: install-dvi-recursive 550 551install-dvi-am: 552 553install-exec-am: 554 555install-html: install-html-recursive 556 557install-html-am: 558 559install-info: install-info-recursive 560 561install-info-am: 562 563install-man: 564 565install-pdf: install-pdf-recursive 566 567install-pdf-am: 568 569install-ps: install-ps-recursive 570 571install-ps-am: 572 573installcheck-am: 574 575maintainer-clean: maintainer-clean-recursive 576 -rm -f Makefile 577maintainer-clean-am: distclean-am maintainer-clean-generic 578 579mostlyclean: mostlyclean-recursive 580 581mostlyclean-am: mostlyclean-generic mostlyclean-libtool 582 583pdf: pdf-recursive 584 585pdf-am: 586 587ps: ps-recursive 588 589ps-am: 590 591uninstall-am: 592 593.MAKE: $(am__recursive_targets) install-am install-strip 594 595.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ 596 check-am clean clean-generic clean-libtool cscopelist-am ctags \ 597 ctags-am distclean distclean-generic distclean-libtool \ 598 distclean-tags distdir dvi dvi-am html html-am info info-am \ 599 install install-am install-data install-data-am install-dvi \ 600 install-dvi-am install-exec install-exec-am install-html \ 601 install-html-am install-info install-info-am install-man \ 602 install-pdf install-pdf-am install-ps install-ps-am \ 603 install-strip installcheck installcheck-am installdirs \ 604 installdirs-am maintainer-clean maintainer-clean-generic \ 605 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ 606 ps ps-am tags tags-am uninstall uninstall-am 607 608 609# Tell versions [3.59,3.63) of GNU make to not export all variables. 610# Otherwise a system limit (for SysV at least) may be exceeded. 611.NOEXPORT: 612