xref: /freebsd/contrib/ntp/ntpq/ntpq.h (revision 96190b4fef3b4a0cc3ca0606b0c4e3e69a5e6717)
1 /*
2  * ntpq.h - definitions of interest to ntpq
3  */
4 #ifdef HAVE_UNISTD_H
5 # include <unistd.h>
6 #endif
7 #include "ntp_fp.h"
8 #include "ntp.h"
9 #include "ntp_stdlib.h"
10 #include "ntp_string.h"
11 #include "ntp_malloc.h"
12 #include "ntp_assert.h"
13 #include "ntp_control.h"
14 
15 #include "ntpq-opts.h"
16 
17 /*
18  * Maximum number of arguments
19  */
20 #define	MAXARGS	4
21 
22 /*
23  * Limit on packets in a single response.  Increasing this value to
24  * 96 will marginally speed "mrulist" operation on lossless networks
25  * but it has been observed to cause loss on WiFi networks and with
26  * an IPv6 go6.net tunnel over UDP.  That loss causes the request
27  * row limit to be cut in half, and it grows back very slowly to
28  * ensure forward progress is made and loss isn't triggered too quickly
29  * afterward.  While the lossless case gains only marginally with
30  * MAXFRAGS == 96, the lossy case is a lot slower due to the repeated
31  * timeouts.  Empirally, MAXFRAGS == 32 avoids most of the routine loss
32  * on both the WiFi and UDP v6 tunnel tests and seems a good compromise.
33  * This suggests some device in the path has a limit of 32 ~512 byte UDP
34  * packets in queue.
35  * Lowering MAXFRAGS may help with particularly lossy networks, but some
36  * ntpq commands may rely on the longtime value of 24 implicitly,
37  * assuming a single multipacket response will be large enough for any
38  * needs.  In contrast, the "mrulist" command is implemented as a series
39  * of requests and multipacket responses to each.
40  */
41 #define	MAXFRAGS	32
42 
43 /*
44  * Error codes for internal use
45  */
46 #define	ERR_UNSPEC		256
47 #define	ERR_INCOMPLETE		257
48 #define	ERR_TIMEOUT		258
49 #define	ERR_TOOMUCH		259
50 
51 /*
52  * Flags for forming descriptors.
53  */
54 #define	OPT		0x80	/* this argument is optional, or'd with type */
55 
56 #define	NO		0x0
57 #define	NTP_STR		0x1	/* string argument */
58 #define	NTP_UINT	0x2	/* unsigned integer */
59 #define	NTP_INT		0x3	/* signed integer */
60 #define	NTP_ADD		0x4	/* IP network address */
61 #define IP_VERSION	0x5	/* IP version */
62 #define	NTP_ADP		0x6	/* IP address and port */
63 #define NTP_LFP		0x7	/* NTP timestamp */
64 #define NTP_MODE	0x8	/* peer mode */
65 #define NTP_2BIT	0x9	/* leap bits */
66 #define NTP_REFID	0xA	/* RefID */
67 
68 /*
69  * Arguments are returned in a union
70  */
71 typedef union {
72 	const char *string;
73 	long ival;
74 	u_long uval;
75 	sockaddr_u netnum;
76 } arg_v;
77 
78 /*
79  * Structure for passing parsed command line
80  */
81 struct parse {
82 	const char *keyword;
83 	arg_v argval[MAXARGS];
84 	size_t nargs;
85 };
86 
87 /*
88  * ntpdc includes a command parser which could charitably be called
89  * crude.  The following structure is used to define the command
90  * syntax.
91  */
92 struct xcmd {
93   const char *keyword;		/* command key word */
94 	void (*handler)	(struct parse *, FILE *);	/* command handler */
95 	u_char arg[MAXARGS];	/* descriptors for arguments */
96   const char *desc[MAXARGS];	/* descriptions for arguments */
97   const char *comment;
98 };
99 
100 /*
101  * Structure to hold association data
102  */
103 struct association {
104 	associd_t assid;
105 	u_short status;
106 };
107 
108 /*
109  * mrulist terminal status interval
110  */
111 #define	MRU_REPORT_SECS	5
112 
113 /*
114  * var_format is used to override cooked formatting for selected vars.
115  */
116 typedef struct var_format_tag {
117 	const char *	varname;
118 	u_short		fmt;
119 } var_format;
120 
121 typedef struct chost_tag chost;
122 struct chost_tag {
123 	const char *name;
124 	int 	    fam;
125 };
126 
127 extern chost	chosts[];
128 
129 extern int	interactive;	/* are we prompting? */
130 extern int	old_rv;		/* use old rv behavior? --old-rv */
131 extern te_Refid	drefid;		/* How should we display a refid? */
132 extern u_int	assoc_cache_slots;/* count of allocated array entries */
133 extern u_int	numassoc;	/* number of cached associations */
134 extern u_int	numhosts;
135 
136 extern	void	grow_assoc_cache(void);
137 extern	void	asciize		(int, char *, FILE *);
138 extern	int	getnetnum	(const char *, sockaddr_u *, char *, int);
139 extern	void	sortassoc	(void);
140 extern	void	show_error_msg	(int, associd_t);
141 extern	int	dogetassoc	(FILE *);
142 extern	int	doquery		(int, associd_t, int, size_t, const char *,
143 				 u_short *, size_t *, const char **);
144 extern	int	doqueryex	(int, associd_t, int, size_t, const char *,
145 				 u_short *, size_t *, const char **, int);
146 extern	const char * nntohost	(sockaddr_u *);
147 extern	const char * nntohost_col (sockaddr_u *, size_t, int);
148 extern	const char * nntohostp	(sockaddr_u *);
149 extern	int	decodets	(char *, l_fp *);
150 extern	int	decodeuint	(char *, u_long *);
151 extern	int	nextvar		(size_t *, const char **, char **, char **);
152 extern	int	decodetime	(char *, l_fp *);
153 extern	void	printvars	(size_t, const char *, int, int, int, FILE *);
154 extern	int	decodeint	(char *, long *);
155 extern	void	makeascii	(size_t, const char *, FILE *);
156 extern	const char * trunc_left	(const char *, size_t);
157 extern	const char * trunc_right(const char *, size_t);
158 
159 typedef	int/*BOOL*/ (*Ctrl_C_Handler)(void);
160 extern	int/*BOOL*/ 	push_ctrl_c_handler(Ctrl_C_Handler);
161 extern	int/*BOOL*/ 	pop_ctrl_c_handler(Ctrl_C_Handler);
162