. it 1 an-trap . if \\n[.$] \,\\$*\/ ..
EDIT THIS FILE WITH CAUTION (in-mem file)

It has been AutoGen-ed June 23, 2020 at 02:20:56 AM by AutoGen 5.18.5
From the definitions ntpq-opts.def
and the template file agman-cmd.tpl
\f\*[B-Font]ntpq - standard NTP query program \f\*[B-Font]ntpq Mixture of short (flag) options and long options
[\f\*[B-Font]-flags\f[]] [\f\*[B-Font]-flag\f[] [\f\*[I-Font]value\f[]]] [\f\*[B-Font]--option-name\f[][[=| ]\f\*[I-Font]value\f[]]] [ host ...] The \f\*[B-Font]ntpq utility program is used to query NTP servers to monitor NTP operations and performance, requesting information about current state and/or changes in that state. The program may be run either in interactive mode or controlled using command line arguments. Requests to read and write arbitrary variables can be assembled, with raw and pretty-printed output options being available. The \f\*[B-Font]ntpq utility can also obtain and print a list of peers in a common format by sending multiple queries to the server. If one or more request options is included on the command line when \f\*[B-Font]ntpq is executed, each of the requests will be sent to the NTP servers running on each of the hosts given as command line arguments, or on localhost by default. If no request options are given, \f\*[B-Font]ntpq will attempt to read commands from the standard input and execute these on the NTP server running on the first host given on the command line, again defaulting to localhost when no other host is specified. The \f\*[B-Font]ntpq utility will prompt for commands if the standard input is a terminal device. \f\*[B-Font]ntpq uses NTP mode 6 packets to communicate with the NTP server, and hence can be used to query any compatible server on the network which permits it. Note that since NTP is a UDP protocol this communication will be somewhat unreliable, especially over large distances in terms of network topology. The \f\*[B-Font]ntpq utility makes one attempt to retransmit requests, and will time requests out if the remote host is not heard from within a suitable timeout time. Note that in contexts where a host name is expected, a \f\*[B-Font]-4\f[] qualifier preceding the host name forces resolution to the IPv4 namespace, while a \f\*[B-Font]-6\f[] qualifier forces resolution to the IPv6 namespace. For examples and usage, see the \*[Lq]NTP Debugging Techniques\*[Rq] page. Specifying a command line option other than \f\*[B-Font]-i\f[] or \f\*[B-Font]-n\f[] will cause the specified query (queries) to be sent to the indicated host(s) immediately. Otherwise, \f\*[B-Font]ntpq will attempt to read interactive format commands from the standard input. Interactive format commands consist of a keyword followed by zero to four arguments. Only enough characters of the full keyword to uniquely identify the command need be typed. A number of interactive format commands are executed entirely within the \f\*[B-Font]ntpq utility itself and do not result in NTP requests being sent to a server. These are described following.

15 .NOP \f\*[B-Font]?\f[] [\f\*[I-Font]command\f[]]

.ns

15 .NOP \f\*[B-Font]help\f[] [\f\*[I-Font]command\f[]] A \[oq]?\[cq] by itself will print a list of all the commands known to \f\*[B-Font]ntpq. A \[oq]?\[cq] followed by a command name will print function and usage information about the command.

.ns

15 .NOP \f\*[B-Font]addvars\f[] \f\*[I-Font]name\f[][=\f\*[I-Font]value\f[]][,...]

.ns

15 .NOP \f\*[B-Font]rmvars\f[] \f\*[I-Font]name\f[][,...]

.ns

15 .NOP \f\*[B-Font]clearvars\f[]

.ns

15 .NOP \f\*[B-Font]showvars\f[] The arguments to this command consist of a list of items of the form \f\*[I-Font]name\f[][=\f\*[I-Font]value\f[]], where the .NOP =\f\*[I-Font]value\f[] is ignored, and can be omitted, in requests to the server to read variables. The \f\*[B-Font]ntpq utility maintains an internal list in which data to be included in messages can be assembled, and displayed or set using the \f\*[B-Font]readlist\f[] and \f\*[B-Font]writelist\f[] commands described below. The \f\*[B-Font]addvars\f[] command allows variables and their optional values to be added to the list. If more than one variable is to be added, the list should be comma-separated and not contain white space. The \f\*[B-Font]rmvars\f[] command can be used to remove individual variables from the list, while the \f\*[B-Font]clearvars\f[] command removes all variables from the list. The \f\*[B-Font]showvars\f[] command displays the current list of optional variables.

.ns

15 .NOP \f\*[B-Font]authenticate\f[] [\f\*[B-Font]yes\f[]|\f\*[B-Font]no\f[]] Normally \f\*[B-Font]ntpq does not authenticate requests unless they are write requests. The command \f\*[B-Font]authenticate\f[] \f\*[B-Font]yes\f[] causes \f\*[B-Font]ntpq to send authentication with all requests it makes. Authenticated requests causes some servers to handle requests slightly differently. The command \f\*[B-Font]authenticate\f[] causes \f\*[B-Font]ntpq to display whether or not it is currently authenticating requests.

.ns

15 .NOP \f\*[B-Font]cooked\f[] Causes output from query commands to be "cooked", so that variables which are recognized by \f\*[B-Font]ntpq will have their values reformatted for human consumption. Variables which \f\*[B-Font]ntpq could not decode completely are marked with a trailing \[oq]?\[cq].

.ns

15 .NOP \f\*[B-Font]debug\f[] [\f\*[B-Font]more\f[]|\f\*[B-Font]less\f[]|\f\*[B-Font]off\f[]] With no argument, displays the current debug level. Otherwise, the debugging level is changed as indicated.

.ns

15 .NOP \f\*[B-Font]delay\f[] [\f\*[I-Font]milliseconds\f[]] Specify a time interval to be added to timestamps included in requests which require authentication. This is used to enable (unreliable) server reconfiguration over long delay network paths or between machines whose clocks are unsynchronized. Actually the server does not now require timestamps in authenticated requests, so this command may be obsolete. Without any arguments, displays the current delay.

.ns

15 .NOP \f\*[B-Font]drefid\f[] [\f\*[B-Font]hash\f[]|\f\*[B-Font]ipv4\f[]] Display refids as IPv4 or hash. Without any arguments, displays whether refids are shown as IPv4 addresses or hashes.

.ns

15 .NOP \f\*[B-Font]exit\f[] Exit \f\*[B-Font]ntpq.

.ns

15 .NOP \f\*[B-Font]host\f[] [\f\*[I-Font]name\f[]] Set the host to which future queries will be sent. The \f\*[I-Font]name\f[] may be either a host name or a numeric address. Without any arguments, displays the current host.

.ns

15 .NOP \f\*[B-Font]hostnames\f[] [\f\*[B-Font]yes\f[]|\f\*[B-Font]no\f[]] If \f\*[B-Font]yes\f[] is specified, host names are printed in information displays. If \f\*[B-Font]no\f[] is specified, numeric addresses are printed instead. The default is \f\*[B-Font]yes\f[], unless modified using the command line \f\*[B-Font]-n\f[] switch. Without any arguments, displays whether host names or numeric addresses are shown.

.ns

15 .NOP \f\*[B-Font]keyid\f[] [\f\*[I-Font]keyid\f[]] This command allows the specification of a key number to be used to authenticate configuration requests. This must correspond to the \f\*[B-Font]controlkey\f[] key number the server has been configured to use for this purpose. Without any arguments, displays the current \f\*[I-Font]keyid\f[].

.ns

15 .NOP \f\*[B-Font]keytype\f[] [\f\*[I-Font]digest\f[]] Specify the digest algorithm to use for authenticating requests, with default \f\*[B-Font]MD5\f[]. If \f\*[B-Font]ntpq was built with OpenSSL support, and OpenSSL is installed, \f\*[I-Font]digest\f[] can be any message digest algorithm supported by OpenSSL. If no argument is given, the current \f\*[B-Font]keytype\f[] \f\*[I-Font]digest\f[] algorithm used is displayed.

.ns

15 .NOP \f\*[B-Font]ntpversion\f[] [\f\*[B-Font]1\f[]|\f\*[B-Font]2\f[]|\f\*[B-Font]3\f[]|\f\*[B-Font]4\f[]] Sets the NTP version number which \f\*[B-Font]ntpq claims in packets. Defaults to 3, and note that mode 6 control messages (and modes, for that matter) didn't exist in NTP version 1. There appear to be no servers left which demand version 1. With no argument, displays the current NTP version that will be used when communicating with servers.

.ns

15 .NOP \f\*[B-Font]passwd\f[] This command prompts you to type in a password (which will not be echoed) which will be used to authenticate configuration requests. The password must correspond to the key configured for use by the NTP server for this purpose if such requests are to be successful.

.ns

15 .NOP \f\*[B-Font]poll\f[] [\f\*[I-Font]n\f[]] [\f\*[B-Font]verbose\f[]] Poll an NTP server in client mode \f\*[I-Font]n\f[] times. Poll not implemented yet.

.ns

15 .NOP \f\*[B-Font]quit\f[] Exit \f\*[B-Font]ntpq.

.ns

15 .NOP \f\*[B-Font]raw\f[] Causes all output from query commands is printed as received from the remote server. The only formating/interpretation done on the data is to transform nonascii data into a printable (but barely understandable) form.

.ns

15 .NOP \f\*[B-Font]timeout\f[] [\f\*[I-Font]milliseconds\f[]] Specify a timeout period for responses to server queries. The default is about 5000 milliseconds. Without any arguments, displays the current timeout period. Note that since \f\*[B-Font]ntpq retries each query once after a timeout, the total waiting time for a timeout will be twice the timeout value set.

.ns

15 .NOP \f\*[B-Font]version\f[] Display the version of the \f\*[B-Font]ntpq program.

Association ids are used to identify system, peer and clock variables. System variables are assigned an association id of zero and system name space, while each association is assigned a nonzero association id and peer namespace. Most control commands send a single message to the server and expect a single response message. The exceptions are the \f\*[B-Font]peers\f[] command, which sends a series of messages, and the \f\*[B-Font]mreadlist\f[] and \f\*[B-Font]mreadvar\f[] commands, which iterate over a range of associations.

10 .NOP \f\*[B-Font]apeers\f[] Display a list of peers in the form: .Dl [tally]remote refid assid st t when pool reach delay offset jitter where the output is just like the \f\*[B-Font]peers\f[] command except that the \f\*[B-Font]refid\f[] is displayed in hex format and the association number is also displayed.

.ns

10 .NOP \f\*[B-Font]associations\f[] Display a list of mobilized associations in the form: .Dl ind assid status conf reach auth condition last_event cnt

.ns

10 .NOP \f\*[B-Font]authinfo\f[] Display the authentication statistics counters: time since reset, stored keys, free keys, key lookups, keys not found, uncached keys, expired keys, encryptions, decryptions.

.ns

10 .NOP \f\*[B-Font]clocklist\f[] [\f\*[I-Font]associd\f[]]

.ns

10 .NOP \f\*[B-Font]cl\f[] [\f\*[I-Font]associd\f[]] Display all clock variables in the variable list for those associations supporting a reference clock.

.ns

10 .NOP \f\*[B-Font]clockvar\f[] [\f\*[I-Font]associd\f[]] [\f\*[I-Font]name\f[][=\f\*[I-Font]value\f[]][] ,...]

.ns

10 .NOP \f\*[B-Font]cv\f[] [\f\*[I-Font]associd\f[]] [\f\*[I-Font]name\f[][=\f\*[I-Font]value\f[]][] ,...] Display a list of clock variables for those associations supporting a reference clock.

.ns

10 .NOP \f\*[B-Font]:config\f[] \f\*[I-Font]configuration command line\f[] Send the remainder of the command line, including whitespace, to the server as a run-time configuration command in the same format as a line in the configuration file. This command is experimental until further notice and clarification. Authentication is of course required.

.ns

10 .NOP \f\*[B-Font]config-from-file\f[] \f\*[I-Font]filename\f[] Send each line of \f\*[I-Font]filename\f[] to the server as run-time configuration commands in the same format as lines in the configuration file. This command is experimental until further notice and clarification. Authentication is required.

.ns

10 .NOP \f\*[B-Font]ifstats\f[] Display status and statistics counters for each local network interface address: interface number, interface name and address or broadcast, drop, flag, ttl, mc, received, sent, send failed, peers, uptime. Authentication is required.

.ns

10 .NOP \f\*[B-Font]iostats\f[] Display network and reference clock I/O statistics: time since reset, receive buffers, free receive buffers, used receive buffers, low water refills, dropped packets, ignored packets, received packets, packets sent, packet send failures, input wakeups, useful input wakeups.

.ns

10 .NOP \f\*[B-Font]kerninfo\f[] Display kernel loop and PPS statistics: associd, status, pll offset, pll frequency, maximum error, estimated error, kernel status, pll time constant, precision, frequency tolerance, pps frequency, pps stability, pps jitter, calibration interval, calibration cycles, jitter exceeded, stability exceeded, calibration errors. As with other ntpq output, times are in milliseconds; very small values may be shown as exponentials. The precision value displayed is in milliseconds as well, unlike the precision system variable.

.ns

10 .NOP \f\*[B-Font]lassociations\f[] Perform the same function as the associations command, except display mobilized and unmobilized associations, including all clients.

.ns

10 .NOP \f\*[B-Font]lopeers\f[] [\f\*[B-Font]-4\f[]|\f\*[B-Font]-6\f[]] Display a list of all peers and clients showing \f\*[B-Font]dstadr\f[] (associated with the given IP version).

.ns

10 .NOP \f\*[B-Font]lpassociations\f[] Display the last obtained list of associations, including all clients.

.ns

10 .NOP \f\*[B-Font]lpeers\f[] [\f\*[B-Font]-4\f[]|\f\*[B-Font]-6\f[]] Display a list of all peers and clients (associated with the given IP version).

.ns

10 .NOP \f\*[B-Font]monstats\f[] Display monitor facility status, statistics, and limits: enabled, addresses, peak addresses, maximum addresses, reclaim above count, reclaim older than, kilobytes, maximum kilobytes.

.ns

10 .NOP \f\*[B-Font]mreadlist\f[] \f\*[I-Font]associdlo\f[] \f\*[I-Font]associdhi\f[]

.ns

10 .NOP \f\*[B-Font]mrl\f[] \f\*[I-Font]associdlo\f[] \f\*[I-Font]associdhi\f[] Perform the same function as the \f\*[B-Font]readlist\f[] command for a range of association ids.

.ns

10 .NOP \f\*[B-Font]mreadvar\f[] \f\*[I-Font]associdlo\f[] \f\*[I-Font]associdhi\f[] [\f\*[I-Font]name\f[]][,...] This range may be determined from the list displayed by any command showing associations.

.ns

10 .NOP \f\*[B-Font]mrv\f[] \f\*[I-Font]associdlo\f[] \f\*[I-Font]associdhi\f[] [\f\*[I-Font]name\f[]][,...] Perform the same function as the \f\*[B-Font]readvar\f[] command for a range of association ids. This range may be determined from the list displayed by any command showing associations.

.ns

10 .NOP \f\*[B-Font]mrulist\f[] [\f\*[B-Font]limited\f[] | \f\*[B-Font]kod\f[] | \f\*[B-Font]mincount\f[]=\f\*[I-Font]count\f[] | \f\*[B-Font]laddr\f[]=\f\*[I-Font]localaddr\f[] | \f\*[B-Font]sort\f[]=[-]\f\*[I-Font]sortorder\f[] | \f\*[B-Font]resany\f[]=\f\*[I-Font]hexmask\f[] | \f\*[B-Font]resall\f[]=\f\*[I-Font]hexmask\f[]] Display traffic counts of the most recently seen source addresses collected and maintained by the monitor facility. With the exception of \f\*[B-Font]sort\f[]=[-]\f\*[I-Font]sortorder\f[], the options filter the list returned by ntpd\f[](8)\f[]. The \f\*[B-Font]limited\f[] and \f\*[B-Font]kod\f[] options return only entries representing client addresses from which the last packet received triggered either discarding or a KoD response. The \f\*[B-Font]mincount\f[]=\f\*[I-Font]count\f[] option filters entries representing less than \f\*[I-Font]count\f[] packets. The \f\*[B-Font]laddr\f[]=\f\*[I-Font]localaddr\f[] option filters entries for packets received on any local address other than \f\*[I-Font]localaddr\f[]. \f\*[B-Font]resany\f[]=\f\*[I-Font]hexmask\f[] and \f\*[B-Font]resall\f[]=\f\*[I-Font]hexmask\f[] filter entries containing none or less than all, respectively, of the bits in \f\*[I-Font]hexmask\f[], which must begin with \f\*[B-Font]0x\f[]. The \f\*[I-Font]sortorder\f[] defaults to \f\*[B-Font]lstint\f[] and may be \f\*[B-Font]addr\f[], \f\*[B-Font]avgint\f[], \f\*[B-Font]count\f[], \f\*[B-Font]lstint\f[], or any of those preceded by \[oq]-\[cq] to reverse the sort order. The output columns are:

.ns

10 .NOP \f\*[B-Font]opeers\f[] [\f\*[B-Font]-4\f[] | \f\*[B-Font]-6\f[]] Obtain and print the old-style list of all peers and clients showing \f\*[B-Font]dstadr\f[] (associated with the given IP version), rather than the \f\*[B-Font]refid\f[].

.ns

10 .NOP \f\*[B-Font]passociations\f[] Perform the same function as the \f\*[B-Font]associations\f[] command, except that it uses previously stored data rather than making a new query.

.ns

10 .NOP \f\*[B-Font]peers\f[] Display a list of peers in the form: .Dl [tally]remote refid st t when pool reach delay offset jitter

.ns

10 .NOP \f\*[B-Font]pstats\f[] \f\*[I-Font]associd\f[] Display the statistics for the peer with the given \f\*[I-Font]associd\f[]: associd, status, remote host, local address, time last received, time until next send, reachability change, packets sent, packets received, bad authentication, bogus origin, duplicate, bad dispersion, bad reference time, candidate order.

.ns

10 .NOP \f\*[B-Font]readlist\f[] [\f\*[I-Font]associd\f[]]

.ns

10 .NOP \f\*[B-Font]rl\f[] [\f\*[I-Font]associd\f[]] Display all system or peer variables. If the \f\*[I-Font]associd\f[] is omitted, it is assumed to be zero.

.ns

10 .NOP \f\*[B-Font]readvar\f[] [\f\*[I-Font]associd\f[] \f\*[I-Font]name\f[][=\f\*[I-Font]value\f[]] [, ...]]

.ns

10 .NOP \f\*[B-Font]rv\f[] [\f\*[I-Font]associd\f[] \f\*[I-Font]name\f[][=\f\*[I-Font]value\f[]] [, ...]] Display the specified system or peer variables. If \f\*[I-Font]associd\f[] is zero, the variables are from the System\f[] Variables\f[] name space, otherwise they are from the Peer\f[] Variables\f[] name space. The \f\*[I-Font]associd\f[] is required, as the same name can occur in both spaces. If no \f\*[I-Font]name\f[] is included, all operative variables in the name space are displayed. In this case only, if the \f\*[I-Font]associd\f[] is omitted, it is assumed to be zero. Multiple names are specified with comma separators and without whitespace. Note that time values are represented in milliseconds and frequency values in parts-per-million (PPM). Some NTP timestamps are represented in the format \f\*[I-Font]YYYY\f[]\f\*[I-Font]MM\f[] \f\*[I-Font]DD\f[] \f\*[I-Font]TTTT\f[], where \f\*[I-Font]YYYY\f[] is the year, \f\*[I-Font]MM\f[] the month of year, \f\*[I-Font]DD\f[] the day of month and \f\*[I-Font]TTTT\f[] the time of day.

.ns

10 .NOP \f\*[B-Font]reslist\f[] Display the access control (restrict) list for \f\*[B-Font]ntpq. Authentication is required.

.ns

10 .NOP \f\*[B-Font]saveconfig\f[] \f\*[I-Font]filename\f[] Save the current configuration, including any runtime modifications made by \f\*[B-Font]:config\f[] or \f\*[B-Font]config-from-file\f[], to the NTP server host file \f\*[I-Font]filename\f[]. This command will be rejected by the server unless .Lk miscopt.html#saveconfigdir "saveconfigdir" appears in the ntpd\f[](8)\f[] configuration file. \f\*[I-Font]filename\f[] can use date\f[](1)\f[] format specifiers to substitute the current date and time, for example, \f\*[B-Font]saveconfig\f[] ntp-%Y%m%d-%H%M%S.conf\f[]. The filename used is stored in system variable \f\*[B-Font]savedconfig\f[]. Authentication is required.

.ns

10 .NOP \f\*[B-Font]sysinfo\f[] Display system operational summary: associd, status, system peer, system peer mode, leap indicator, stratum, log2 precision, root delay, root dispersion, reference id, reference time, system jitter, clock jitter, clock wander, broadcast delay, symm. auth. delay.

.ns

10 .NOP \f\*[B-Font]sysstats\f[] Display system uptime and packet counts maintained in the protocol module: uptime, sysstats reset, packets received, current version, older version, bad length or format, authentication failed, declined, restricted, rate limited, KoD responses, processed for time.

.ns

10 .NOP \f\*[B-Font]timerstats\f[] Display interval timer counters: time since reset, timer overruns, calls to transmit.

.ns

10 .NOP \f\*[B-Font]writelist\f[] \f\*[I-Font]associd\f[] Set all system or peer variables included in the variable list.

.ns

10 .NOP \f\*[B-Font]writevar\f[] \f\*[I-Font]associd\f[] \f\*[I-Font]name\f[]=\f\*[I-Font]value\f[] [, ...] Set the specified variables in the variable list. If the \f\*[I-Font]associd\f[] is zero, the variables are from the System\f[] Variables\f[] name space, otherwise they are from the Peer\f[] Variables\f[] name space. The \f\*[I-Font]associd\f[] is required, as the same name can occur in both spaces. Authentication is required.

The current state of the operating program is shown in a set of status words maintained by the system. Status information is also available on a per-association basis. These words are displayed by the \f\*[B-Font]readlist\f[] and \f\*[B-Font]associations\f[] commands both in hexadecimal and in decoded short tip strings. The codes, tips and short explanations are documented on the .Lk decode.html "Event Messages and Status Words" page. The page also includes a list of system and peer messages, the code for the latest of which is included in the status word. Information resulting from protocol machine state transitions is displayed using an informal set of ASCII strings called .Lk decode.html#kiss "kiss codes" . The original purpose was for kiss-o'-death (KoD) packets sent by the server to advise the client of an unusual condition. They are now displayed, when appropriate, in the reference identifier field in various billboards. The following system variables appear in the \f\*[B-Font]readlist\f[] billboard. Not all variables are displayed in some configurations.

10 .NOP Variable Description

.ns

10 .NOP \f\*[B-Font]status\f[] .Lk decode.html#sys "system status word"

.ns

10 .NOP \f\*[B-Font]version\f[] NTP software version and build time

.ns

10 .NOP \f\*[B-Font]processor\f[] hardware platform and version

.ns

10 .NOP \f\*[B-Font]system\f[] operating system and version

.ns

10 .NOP \f\*[B-Font]leap\f[] leap warning indicator (0-3)

.ns

10 .NOP \f\*[B-Font]stratum\f[] stratum (1-15)

.ns

10 .NOP \f\*[B-Font]precision\f[] precision (log2 s)

.ns

10 .NOP \f\*[B-Font]rootdelay\f[] total roundtrip delay to the primary reference clock

.ns

10 .NOP \f\*[B-Font]rootdisp\f[] total dispersion to the primary reference clock

.ns

10 .NOP \f\*[B-Font]refid\f[] reference id or .Lk decode.html#kiss "kiss code"

.ns

10 .NOP \f\*[B-Font]reftime\f[] reference time

.ns

10 .NOP \f\*[B-Font]clock\f[] date and time of day

.ns

10 .NOP \f\*[B-Font]peer\f[] system peer association id

.ns

10 .NOP \f\*[B-Font]tc\f[] time constant and poll exponent (log2 s) (3-17)

.ns

10 .NOP \f\*[B-Font]mintc\f[] minimum time constant (log2 s) (3-10)

.ns

10 .NOP \f\*[B-Font]offset\f[] combined offset of server relative to this host

.ns

10 .NOP \f\*[B-Font]frequency\f[] frequency drift (PPM) relative to hardware clock

.ns

10 .NOP \f\*[B-Font]sys_jitter\f[] combined system jitter

.ns

10 .NOP \f\*[B-Font]clk_wander\f[] clock frequency wander (PPM)

.ns

10 .NOP \f\*[B-Font]clk_jitter\f[] clock jitter

.ns

10 .NOP \f\*[B-Font]tai\f[] TAI-UTC offset (s)

.ns

10 .NOP \f\*[B-Font]leapsec\f[] NTP seconds when the next leap second is/was inserted

.ns

10 .NOP \f\*[B-Font]expire\f[] NTP seconds when the NIST leapseconds file expires

The jitter and wander statistics are exponentially-weighted RMS averages. The system jitter is defined in the NTPv4 specification; the clock jitter statistic is computed by the clock discipline module. When the NTPv4 daemon is compiled with the OpenSSL software library, additional system variables are displayed, including some or all of the following, depending on the particular Autokey dance:

10 .NOP Variable Description

.ns

10 .NOP \f\*[B-Font]host\f[] Autokey host name for this host

.ns

10 .NOP \f\*[B-Font]ident\f[] Autokey group name for this host

.ns

10 .NOP \f\*[B-Font]flags\f[] host flags (see Autokey specification)

.ns

10 .NOP \f\*[B-Font]digest\f[] OpenSSL message digest algorithm

.ns

10 .NOP \f\*[B-Font]signature\f[] OpenSSL digest/signature scheme

.ns

10 .NOP \f\*[B-Font]update\f[] NTP seconds at last signature update

.ns

10 .NOP \f\*[B-Font]cert\f[] certificate subject, issuer and certificate flags

.ns

10 .NOP \f\*[B-Font]until\f[] NTP seconds when the certificate expires

The following peer variables appear in the \f\*[B-Font]readlist\f[] billboard for each association. Not all variables are displayed in some configurations.

10 .NOP Variable Description

.ns

10 .NOP \f\*[B-Font]associd\f[] association id

.ns

10 .NOP \f\*[B-Font]status\f[] .Lk decode.html#peer "peer status word"

.ns

10 .NOP \f\*[B-Font]srcadr\f[] source (remote) IP address

.ns

10 .NOP \f\*[B-Font]srcport\f[] source (remote) port

.ns

10 .NOP \f\*[B-Font]dstadr\f[] destination (local) IP address

.ns

10 .NOP \f\*[B-Font]dstport\f[] destination (local) port

.ns

10 .NOP \f\*[B-Font]leap\f[] leap indicator (0-3)

.ns

10 .NOP \f\*[B-Font]stratum\f[] stratum (0-15)

.ns

10 .NOP \f\*[B-Font]precision\f[] precision (log2 s)

.ns

10 .NOP \f\*[B-Font]rootdelay\f[] total roundtrip delay to the primary reference clock

.ns

10 .NOP \f\*[B-Font]rootdisp\f[] total root dispersion to the primary reference clock

.ns

10 .NOP \f\*[B-Font]refid\f[] reference id or .Lk decode.html#kiss "kiss code"

.ns

10 .NOP \f\*[B-Font]reftime\f[] reference time

.ns

10 .NOP \f\*[B-Font]rec\f[] last packet received time

.ns

10 .NOP \f\*[B-Font]reach\f[] reach register (octal)

.ns

10 .NOP \f\*[B-Font]unreach\f[] unreach counter

.ns

10 .NOP \f\*[B-Font]hmode\f[] host mode (1-6)

.ns

10 .NOP \f\*[B-Font]pmode\f[] peer mode (1-5)

.ns

10 .NOP \f\*[B-Font]hpoll\f[] host poll exponent (log2 s) (3-17)

.ns

10 .NOP \f\*[B-Font]ppoll\f[] peer poll exponent (log2 s) (3-17)

.ns

10 .NOP \f\*[B-Font]headway\f[] headway (see .Lk rate.html "Rate Management and the Kiss-o'-Death Packet" )

.ns

10 .NOP \f\*[B-Font]flash\f[] .Lk decode.html#flash "flash status word"

.ns

10 .NOP \f\*[B-Font]keyid\f[] symmetric key id

.ns

10 .NOP \f\*[B-Font]offset\f[] filter offset

.ns

10 .NOP \f\*[B-Font]delay\f[] filter delay

.ns

10 .NOP \f\*[B-Font]dispersion\f[] filter dispersion

.ns

10 .NOP \f\*[B-Font]jitter\f[] filter jitter

.ns

10 .NOP \f\*[B-Font]bias\f[] unicast/broadcast bias

.ns

10 .NOP \f\*[B-Font]xleave\f[] interleave delay (see .Lk xleave.html "NTP Interleaved Modes" )

The \f\*[B-Font]bias\f[] variable is calculated when the first broadcast packet is received after the calibration volley. It represents the offset of the broadcast subgraph relative to the unicast subgraph. The \f\*[B-Font]xleave\f[] variable appears only for the interleaved symmetric and interleaved modes. It represents the internal queuing, buffering and transmission delays for the preceding packet. When the NTPv4 daemon is compiled with the OpenSSL software library, additional peer variables are displayed, including the following:

10 .NOP Variable Description

.ns

10 .NOP \f\*[B-Font]flags\f[] peer flags (see Autokey specification)

.ns

10 .NOP \f\*[B-Font]host\f[] Autokey server name

.ns

10 .NOP \f\*[B-Font]flags\f[] peer flags (see Autokey specification)

.ns

10 .NOP \f\*[B-Font]signature\f[] OpenSSL digest/signature scheme

.ns

10 .NOP \f\*[B-Font]initsequence\f[] initial key id

.ns

10 .NOP \f\*[B-Font]initkey\f[] initial key index

.ns

10 .NOP \f\*[B-Font]timestamp\f[] Autokey signature timestamp

.ns

10 .NOP \f\*[B-Font]ident\f[] Autokey group name for this association

The following clock variables appear in the \f\*[B-Font]clocklist\f[] billboard for each association with a reference clock. Not all variables are displayed in some configurations.

10 .NOP Variable Description

.ns

10 .NOP \f\*[B-Font]associd\f[] association id

.ns

10 .NOP \f\*[B-Font]status\f[] .Lk decode.html#clock "clock status word"

.ns

10 .NOP \f\*[B-Font]device\f[] device description

.ns

10 .NOP \f\*[B-Font]timecode\f[] ASCII time code string (specific to device)

.ns

10 .NOP \f\*[B-Font]poll\f[] poll messages sent

.ns

10 .NOP \f\*[B-Font]noreply\f[] no reply

.ns

10 .NOP \f\*[B-Font]badformat\f[] bad format

.ns

10 .NOP \f\*[B-Font]baddata\f[] bad date or time

.ns

10 .NOP \f\*[B-Font]fudgetime1\f[] fudge time 1

.ns

10 .NOP \f\*[B-Font]fudgetime2\f[] fudge time 2

.ns

10 .NOP \f\*[B-Font]stratum\f[] driver stratum

.ns

10 .NOP \f\*[B-Font]refid\f[] driver reference id

.ns

10 .NOP \f\*[B-Font]flags\f[] driver flags

.NOP \f\*[B-Font]-4\f[], \f\*[B-Font]--ipv4\f[] Force IPv4 name resolution. This option must not appear in combination with any of the following options: ipv6. Force resolution of following host names on the command line to the IPv4 namespace.

.NOP \f\*[B-Font]-6\f[], \f\*[B-Font]--ipv6\f[] Force IPv6 name resolution. This option must not appear in combination with any of the following options: ipv4. Force resolution of following host names on the command line to the IPv6 namespace.

.NOP \f\*[B-Font]-c\f[] \f\*[I-Font]cmd\f[], \f\*[B-Font]--command\f[]=\f\*[I-Font]cmd\f[] run a command and exit. This option may appear an unlimited number of times. The following argument is interpreted as an interactive format command and is added to the list of commands to be executed on the specified host(s).

.NOP \f\*[B-Font]-d\f[], \f\*[B-Font]--debug-level\f[] Increase debug verbosity level. This option may appear an unlimited number of times.

.NOP \f\*[B-Font]-D\f[] \f\*[I-Font]number\f[], \f\*[B-Font]--set-debug-level\f[]=\f\*[I-Font]number\f[] Set the debug verbosity level. This option may appear an unlimited number of times. This option takes an integer number as its argument.

.NOP \f\*[B-Font]-i\f[], \f\*[B-Font]--interactive\f[] Force ntpq to operate in interactive mode. This option must not appear in combination with any of the following options: command, peers. Force ntpq to operate in interactive mode. Prompts will be written to the standard output and commands read from the standard input.

.NOP \f\*[B-Font]-n\f[], \f\*[B-Font]--numeric\f[] numeric host addresses. Output all host addresses in dotted-quad numeric format rather than converting to the canonical host names.

.NOP \f\*[B-Font]--old-rv\f[] Always output status line with readvar. By default, ntpq now suppresses the associd=... line that precedes the output of readvar (alias rv) when a single variable is requested, such as ntpq -c "rv 0 offset". This option causes ntpq to include both lines of output for a single-variable readvar. Using an environment variable to preset this option in a script will enable both older and newer ntpq to behave identically in this regard.

.NOP \f\*[B-Font]-p\f[], \f\*[B-Font]--peers\f[] Print a list of the peers. This option must not appear in combination with any of the following options: interactive. Print a list of the peers known to the server as well as a summary of their state. This is equivalent to the 'peers' interactive command.

.NOP \f\*[B-Font]-r\f[] \f\*[I-Font]keyword\f[], \f\*[B-Font]--refid\f[]=\f\*[I-Font]keyword\f[] Set default display type for S2+ refids. This option takes a keyword as its argument. The argument sets an enumeration value that can be tested by comparing them against the option value macro. The available keywords are:

hash ipv4

or their numeric equivalent. The default \f\*[I-Font]keyword\f[] for this option is: ipv4 Set the default display format for S2+ refids.

.NOP \f\*[B-Font]-w\f[], \f\*[B-Font]--wide\f[] Display the full 'remote' value. Display the full value of the 'remote' value. If this requires more than 15 characters, display the full value, emit a newline, and continue the data display properly indented on the next line.

.NOP \f\*[B-Font]-?\f[], \f\*[B-Font]--help\f[] Display usage information and exit.

.NOP \f\*[B-Font]-!\f[], \f\*[B-Font]--more-help\f[] Pass the extended usage information through a pager.

.NOP \f\*[B-Font]->\f[] [\f\*[I-Font]cfgfile\f[]], \f\*[B-Font]--save-opts\f[] [=\f\*[I-Font]cfgfile\f[]] Save the option state to cfgfile. The default is the last configuration file listed in the OPTION PRESETS section, below. The command will exit after updating the config file.

.NOP \f\*[B-Font]-<\f[] \f\*[I-Font]cfgfile\f[], \f\*[B-Font]--load-opts\f[]=\f\*[I-Font]cfgfile\f[], \f\*[B-Font]--no-load-opts\f[] Load options from cfgfile. The no-load-opts form will disable the loading of earlier config/rc/ini files. --no-load-opts is handled early, out of order.

.NOP \f\*[B-Font]--version\f[] [{\f\*[I-Font]v|c|n\f[]}] Output version of program and exit. The default mode is `v', a simple version. The `c' mode will print copyright information and `n' will print the full copyright notice.

Any option that is not marked as not presettable may be preset by loading values from configuration ("RC" or ".INI") file(s) and values from environment variables named:

 NTPQ_<option-name> or NTPQ

The environmental presets take precedence (are processed later than) the configuration files. The homerc files are "$HOME", and ".". If any of these are directories, then the file .ntprc is searched for within those directories. See OPTION PRESETS for configuration environment variables. See OPTION PRESETS for configuration files. One of the following exit values will be returned:

.NOP 0 " (EXIT_SUCCESS)" Successful program execution.

.NOP 1 " (EXIT_FAILURE)" The operation failed or the command syntax was not valid.

.NOP 66 " (EX_NOINPUT)" A specified configuration file could not be loaded.

.NOP 70 " (EX_SOFTWARE)" libopts had an internal operational error. Please report it to autogen-users@lists.sourceforge.net. Thank you.

The University of Delaware and Network Time Foundation Copyright (C) 1992-2020 The University of Delaware and Network Time Foundation all rights reserved. This program is released under the terms of the NTP license, <http://ntp.org/license>. Please send bug reports to: http://bugs.ntp.org, bugs@ntp.org This manual page was AutoGen-erated from the ntpq option definitions.