1@node ntpdc Invocation 2@section Invoking ntpdc 3@pindex ntpdc 4@cindex vendor-specific NTPD control program 5@ignore 6# 7# EDIT THIS FILE WITH CAUTION (invoke-ntpdc.texi) 8# 9# It has been AutoGen-ed June 2, 2016 at 07:36:54 AM by AutoGen 5.18.5 10# From the definitions ntpdc-opts.def 11# and the template file agtexi-cmd.tpl 12@end ignore 13 14 15 16@code{ntpdc} 17is deprecated. 18Please use 19@code{ntpq(1ntpqmdoc)} instead - it can do everything 20@code{ntpdc} 21used to do, and it does so using a much more sane interface. 22 23@code{ntpdc} 24is a utility program used to query 25@code{ntpd(1ntpdmdoc)} 26about its 27current state and to request changes in that state. 28It uses NTP mode 7 control message formats described in the source code. 29The program may 30be run either in interactive mode or controlled using command line 31arguments. 32Extensive state and statistics information is available 33through the 34@code{ntpdc} 35interface. 36In addition, nearly all the 37configuration options which can be specified at startup using 38ntpd's configuration file may also be specified at run time using 39@code{ntpdc} 40 41This section was generated by @strong{AutoGen}, 42using the @code{agtexi-cmd} template and the option descriptions for the @code{ntpdc} program. 43This software is released under the NTP license, <http://ntp.org/license>. 44 45@menu 46* ntpdc usage:: ntpdc help/usage (@option{--help}) 47* ntpdc ipv4:: ipv4 option (-4) 48* ntpdc ipv6:: ipv6 option (-6) 49* ntpdc command:: command option (-c) 50* ntpdc interactive:: interactive option (-i) 51* ntpdc listpeers:: listpeers option (-l) 52* ntpdc numeric:: numeric option (-n) 53* ntpdc peers:: peers option (-p) 54* ntpdc showpeers:: showpeers option (-s) 55* ntpdc config:: presetting/configuring ntpdc 56* ntpdc exit status:: exit status 57* ntpdc Usage:: Usage 58* ntpdc See Also:: See Also 59* ntpdc Authors:: Authors 60* ntpdc Bugs:: Bugs 61@end menu 62 63@node ntpdc usage 64@subsection ntpdc help/usage (@option{--help}) 65@cindex ntpdc help 66 67This is the automatically generated usage text for ntpdc. 68 69The text printed is the same whether selected with the @code{help} option 70(@option{--help}) or the @code{more-help} option (@option{--more-help}). @code{more-help} will print 71the usage text by passing it through a pager program. 72@code{more-help} is disabled on platforms without a working 73@code{fork(2)} function. The @code{PAGER} environment variable is 74used to select the program, defaulting to @file{more}. Both will exit 75with a status code of 0. 76 77@exampleindent 0 78@example 79ntpdc - vendor-specific NTPD control program - Ver. 4.2.8p8 80Usage: ntpdc [ -<flag> [<val>] | --<name>[@{=| @}<val>] ]... [ host ...] 81 Flg Arg Option-Name Description 82 -4 no ipv4 Force IPv4 DNS name resolution 83 - prohibits the option 'ipv6' 84 -6 no ipv6 Force IPv6 DNS name resolution 85 - prohibits the option 'ipv4' 86 -c Str command run a command and exit 87 - may appear multiple times 88 -d no debug-level Increase debug verbosity level 89 - may appear multiple times 90 -D Num set-debug-level Set the debug verbosity level 91 - may appear multiple times 92 -i no interactive Force ntpq to operate in interactive mode 93 - prohibits these options: 94 command 95 listpeers 96 peers 97 showpeers 98 -l no listpeers Print a list of the peers 99 - prohibits the option 'command' 100 -n no numeric numeric host addresses 101 -p no peers Print a list of the peers 102 - prohibits the option 'command' 103 -s no showpeers Show a list of the peers 104 - prohibits the option 'command' 105 opt version output version information and exit 106 -? no help display extended usage information and exit 107 -! no more-help extended usage information passed thru pager 108 -> opt save-opts save the option state to a config file 109 -< Str load-opts load options from a config file 110 - disabled as '--no-load-opts' 111 - may appear multiple times 112 113Options are specified by doubled hyphens and their name or by a single 114hyphen and the flag character. 115 116 117The following option preset mechanisms are supported: 118 - reading file $HOME/.ntprc 119 - reading file ./.ntprc 120 - examining environment variables named NTPDC_* 121 122Please send bug reports to: <http://bugs.ntp.org, bugs@@ntp.org> 123@end example 124@exampleindent 4 125 126@node ntpdc ipv4 127@subsection ipv4 option (-4) 128@cindex ntpdc-ipv4 129 130This is the ``force ipv4 dns name resolution'' option. 131 132@noindent 133This option has some usage constraints. It: 134@itemize @bullet 135@item 136must not appear in combination with any of the following options: 137ipv6. 138@end itemize 139 140Force DNS resolution of following host names on the command line 141to the IPv4 namespace. 142@node ntpdc ipv6 143@subsection ipv6 option (-6) 144@cindex ntpdc-ipv6 145 146This is the ``force ipv6 dns name resolution'' option. 147 148@noindent 149This option has some usage constraints. It: 150@itemize @bullet 151@item 152must not appear in combination with any of the following options: 153ipv4. 154@end itemize 155 156Force DNS resolution of following host names on the command line 157to the IPv6 namespace. 158@node ntpdc command 159@subsection command option (-c) 160@cindex ntpdc-command 161 162This is the ``run a command and exit'' option. 163This option takes a string argument @file{cmd}. 164 165@noindent 166This option has some usage constraints. It: 167@itemize @bullet 168@item 169may appear an unlimited number of times. 170@end itemize 171 172The following argument is interpreted as an interactive format command 173and is added to the list of commands to be executed on the specified 174host(s). 175@node ntpdc interactive 176@subsection interactive option (-i) 177@cindex ntpdc-interactive 178 179This is the ``force ntpq to operate in interactive mode'' option. 180 181@noindent 182This option has some usage constraints. It: 183@itemize @bullet 184@item 185must not appear in combination with any of the following options: 186command, listpeers, peers, showpeers. 187@end itemize 188 189Force ntpq to operate in interactive mode. Prompts will be written 190to the standard output and commands read from the standard input. 191@node ntpdc listpeers 192@subsection listpeers option (-l) 193@cindex ntpdc-listpeers 194 195This is the ``print a list of the peers'' option. 196 197@noindent 198This option has some usage constraints. It: 199@itemize @bullet 200@item 201must not appear in combination with any of the following options: 202command. 203@end itemize 204 205Print a list of the peers known to the server as well as a summary of 206their state. This is equivalent to the 'listpeers' interactive command. 207@node ntpdc numeric 208@subsection numeric option (-n) 209@cindex ntpdc-numeric 210 211This is the ``numeric host addresses'' option. 212Output all host addresses in dotted-quad numeric format rather than 213converting to the canonical host names. 214@node ntpdc peers 215@subsection peers option (-p) 216@cindex ntpdc-peers 217 218This is the ``print a list of the peers'' option. 219 220@noindent 221This option has some usage constraints. It: 222@itemize @bullet 223@item 224must not appear in combination with any of the following options: 225command. 226@end itemize 227 228Print a list of the peers known to the server as well as a summary 229of their state. This is equivalent to the 'peers' interactive command. 230@node ntpdc showpeers 231@subsection showpeers option (-s) 232@cindex ntpdc-showpeers 233 234This is the ``show a list of the peers'' option. 235 236@noindent 237This option has some usage constraints. It: 238@itemize @bullet 239@item 240must not appear in combination with any of the following options: 241command. 242@end itemize 243 244Print a list of the peers known to the server as well as a summary 245of their state. This is equivalent to the 'dmpeers' interactive command. 246 247 248@node ntpdc config 249@subsection presetting/configuring ntpdc 250 251Any option that is not marked as @i{not presettable} may be preset by 252loading values from configuration ("rc" or "ini") files, and values from environment variables named @code{NTPDC} and @code{NTPDC_<OPTION_NAME>}. @code{<OPTION_NAME>} must be one of 253the options listed above in upper case and segmented with underscores. 254The @code{NTPDC} variable will be tokenized and parsed like 255the command line. The remaining variables are tested for existence and their 256values are treated like option arguments. 257 258 259@noindent 260@code{libopts} will search in 2 places for configuration files: 261@itemize @bullet 262@item 263$HOME 264@item 265$PWD 266@end itemize 267The environment variables @code{HOME}, and @code{PWD} 268are expanded and replaced when @file{ntpdc} runs. 269For any of these that are plain files, they are simply processed. 270For any that are directories, then a file named @file{.ntprc} is searched for 271within that directory and processed. 272 273Configuration files may be in a wide variety of formats. 274The basic format is an option name followed by a value (argument) on the 275same line. Values may be separated from the option name with a colon, 276equal sign or simply white space. Values may be continued across multiple 277lines by escaping the newline with a backslash. 278 279Multiple programs may also share the same initialization file. 280Common options are collected at the top, followed by program specific 281segments. The segments are separated by lines like: 282@example 283[NTPDC] 284@end example 285@noindent 286or by 287@example 288<?program ntpdc> 289@end example 290@noindent 291Do not mix these styles within one configuration file. 292 293Compound values and carefully constructed string values may also be 294specified using XML syntax: 295@example 296<option-name> 297 <sub-opt>...<...>...</sub-opt> 298</option-name> 299@end example 300@noindent 301yielding an @code{option-name.sub-opt} string value of 302@example 303"...<...>..." 304@end example 305@code{AutoOpts} does not track suboptions. You simply note that it is a 306hierarchicly valued option. @code{AutoOpts} does provide a means for searching 307the associated name/value pair list (see: optionFindValue). 308 309The command line options relating to configuration and/or usage help are: 310 311@subsubheading version (-) 312 313Print the program version to standard out, optionally with licensing 314information, then exit 0. The optional argument specifies how much licensing 315detail to provide. The default is to print just the version. The licensing infomation may be selected with an option argument. 316Only the first letter of the argument is examined: 317 318@table @samp 319@item version 320Only print the version. This is the default. 321@item copyright 322Name the copyright usage licensing terms. 323@item verbose 324Print the full copyright usage licensing terms. 325@end table 326 327@node ntpdc exit status 328@subsection ntpdc exit status 329 330One of the following exit values will be returned: 331@table @samp 332@item 0 (EXIT_SUCCESS) 333Successful program execution. 334@item 1 (EXIT_FAILURE) 335The operation failed or the command syntax was not valid. 336@item 66 (EX_NOINPUT) 337A specified configuration file could not be loaded. 338@item 70 (EX_SOFTWARE) 339libopts had an internal operational error. Please report 340it to autogen-users@@lists.sourceforge.net. Thank you. 341@end table 342@node ntpdc Usage 343@subsection ntpdc Usage 344@node ntpdc See Also 345@subsection ntpdc See Also 346@node ntpdc Authors 347@subsection ntpdc Authors 348@node ntpdc Bugs 349@subsection ntpdc Bugs 350