1 /* 2 * /src/NTP/REPOSITORY/ntp4-dev/ntpd/refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A 3 * 4 * refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A 5 * 6 * generic reference clock driver for several DCF/GPS/MSF/... receivers 7 * 8 * PPS notes: 9 * On systems that support PPSAPI (RFC2783) PPSAPI is the 10 * preferred interface. 11 * 12 * Optionally make use of a STREAMS module for input processing where 13 * available and configured. This STREAMS module reduces the time 14 * stamp latency for serial and PPS events. 15 * Currently the STREAMS module is only available for Suns running 16 * SunOS 4.x and SunOS5.x. 17 * 18 * Copyright (c) 1995-2009 by Frank Kardel <kardel <AT> ntp.org> 19 * Copyright (c) 1989-1994 by Frank Kardel, Friedrich-Alexander Universitaet Erlangen-Nuernberg, Germany 20 * 21 * Redistribution and use in source and binary forms, with or without 22 * modification, are permitted provided that the following conditions 23 * are met: 24 * 1. Redistributions of source code must retain the above copyright 25 * notice, this list of conditions and the following disclaimer. 26 * 2. Redistributions in binary form must reproduce the above copyright 27 * notice, this list of conditions and the following disclaimer in the 28 * documentation and/or other materials provided with the distribution. 29 * 3. Neither the name of the author nor the names of its contributors 30 * may be used to endorse or promote products derived from this software 31 * without specific prior written permission. 32 * 33 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 34 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 35 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 36 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 37 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 38 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 39 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 40 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 41 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 42 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 43 * SUCH DAMAGE. 44 * 45 */ 46 47 #ifdef HAVE_CONFIG_H 48 # include "config.h" 49 #endif 50 51 #include "ntp_types.h" 52 53 #if defined(REFCLOCK) && defined(CLOCK_PARSE) 54 55 /* 56 * This driver currently provides the support for 57 * - Meinberg receiver DCF77 PZF535 (TCXO version) (DCF) 58 * - Meinberg receiver DCF77 PZF535 (OCXO version) (DCF) 59 * - Meinberg receiver DCF77 PZF509 (DCF) 60 * - Meinberg receiver DCF77 AM receivers (e.g. C51) (DCF) 61 * - IGEL CLOCK (DCF) 62 * - ELV DCF7000 (DCF) 63 * - Schmid clock (DCF) 64 * - Conrad DCF77 receiver module (DCF) 65 * - FAU DCF77 NTP receiver (TimeBrick) (DCF) 66 * - WHARTON 400A Series clock (DCF) 67 * 68 * - Meinberg GPS receivers (GPS) 69 * - Trimble (TSIP and TAIP protocol) (GPS) 70 * 71 * - RCC8000 MSF Receiver (MSF) 72 * - VARITEXT clock (MSF) 73 */ 74 75 /* 76 * Meinberg receivers are usually connected via a 77 * 9600/7E1 or 19200/8N1 serial line. 78 * 79 * The Meinberg GPS receivers also have a special NTP time stamp 80 * format. The firmware release is Uni-Erlangen. 81 * 82 * Meinberg generic receiver setup: 83 * output time code every second 84 * Baud rate 9600 7E2S 85 * 86 * Meinberg GPS receiver setup: 87 * output time code every second 88 * Baudrate 19200 8N1 89 * 90 * This software supports the standard data formats used 91 * in Meinberg receivers. 92 * 93 * Special software versions are only sensible for the 94 * oldest GPS receiver, GPS16x. For newer receiver types 95 * the output string format can be configured at the device, 96 * and the device name is generally GPSxxx instead of GPS16x. 97 * 98 * Meinberg can be reached via: http://www.meinberg.de/ 99 */ 100 101 #include "ntpd.h" 102 #include "ntp_refclock.h" 103 #include "timevalops.h" /* includes <sys/time.h> */ 104 #include "ntp_control.h" 105 #include "ntp_string.h" 106 107 #include <stdio.h> 108 #include <ctype.h> 109 #ifndef TM_IN_SYS_TIME 110 # include <time.h> 111 #endif 112 113 #ifdef HAVE_UNISTD_H 114 # include <unistd.h> 115 #endif 116 117 #if !defined(STREAM) && !defined(HAVE_SYSV_TTYS) && !defined(HAVE_BSD_TTYS) && !defined(HAVE_TERMIOS) 118 # include "Bletch: Define one of {STREAM,HAVE_SYSV_TTYS,HAVE_TERMIOS}" 119 #endif 120 121 #ifdef STREAM 122 # include <sys/stream.h> 123 # include <sys/stropts.h> 124 #endif 125 126 #ifdef HAVE_TERMIOS 127 # include <termios.h> 128 # define TTY_GETATTR(_FD_, _ARG_) tcgetattr((_FD_), (_ARG_)) 129 # define TTY_SETATTR(_FD_, _ARG_) tcsetattr((_FD_), TCSANOW, (_ARG_)) 130 # undef HAVE_SYSV_TTYS 131 #endif 132 133 #ifdef HAVE_SYSV_TTYS 134 # define TTY_GETATTR(_FD_, _ARG_) ioctl((_FD_), TCGETA, (_ARG_)) 135 # define TTY_SETATTR(_FD_, _ARG_) ioctl((_FD_), TCSETAW, (_ARG_)) 136 #endif 137 138 #ifdef HAVE_BSD_TTYS 139 /* #error CURRENTLY NO BSD TTY SUPPORT */ 140 # include "Bletch: BSD TTY not currently supported" 141 #endif 142 143 #ifdef HAVE_SYS_IOCTL_H 144 # include <sys/ioctl.h> 145 #endif 146 147 #ifdef HAVE_PPSAPI 148 # include "ppsapi_timepps.h" 149 # include "refclock_atom.h" 150 #endif 151 152 #ifdef PPS 153 # ifdef HAVE_SYS_PPSCLOCK_H 154 # include <sys/ppsclock.h> 155 # endif 156 # ifdef HAVE_TIO_SERIAL_STUFF 157 # include <linux/serial.h> 158 # endif 159 #endif 160 161 # define BUFFER_SIZE(_BUF, _PTR) ((int)((_BUF) + sizeof(_BUF) - (_PTR))) 162 # define BUFFER_SIZES(_BUF, _PTR, _SZ) ((int)((_BUF) + (_SZ) - (_PTR))) 163 164 /* 165 * document type of PPS interfacing - copy of ifdef mechanism in local_input() 166 */ 167 #undef PPS_METHOD 168 169 #ifdef HAVE_PPSAPI 170 #define PPS_METHOD "PPS API" 171 #else 172 #ifdef TIOCDCDTIMESTAMP 173 #define PPS_METHOD "TIOCDCDTIMESTAMP" 174 #else /* TIOCDCDTIMESTAMP */ 175 #if defined(HAVE_STRUCT_PPSCLOCKEV) && (defined(HAVE_CIOGETEV) || defined(HAVE_TIOCGPPSEV)) 176 #ifdef HAVE_CIOGETEV 177 #define PPS_METHOD "CIOGETEV" 178 #endif 179 #ifdef HAVE_TIOCGPPSEV 180 #define PPS_METHOD "TIOCGPPSEV" 181 #endif 182 #endif 183 #endif /* TIOCDCDTIMESTAMP */ 184 #endif /* HAVE_PPSAPI */ 185 186 /* 187 * COND_DEF can be conditionally defined as DEF or 0. If defined as DEF 188 * then some more parse-specific variables are flagged to be printed with 189 * "ntpq -c cv <assid>". This can be lengthy, so by default COND_DEF 190 * should be defined as 0. 191 */ 192 #if 0 193 # define COND_DEF DEF // enable this for testing 194 #else 195 # define COND_DEF 0 // enable this by default 196 #endif 197 198 #include "ntp_io.h" 199 #include "ntp_stdlib.h" 200 201 #include "parse.h" 202 #include "mbg_gps166.h" 203 #include "trimble.h" 204 #include "binio.h" 205 #include "ascii.h" 206 #include "ieee754io.h" 207 #include "recvbuff.h" 208 209 static char rcsid[] = "refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A+POWERUPTRUST"; 210 211 /**=========================================================================== 212 ** external interface to ntp mechanism 213 **/ 214 215 static int parse_start (int, struct peer *); 216 static void parse_shutdown (int, struct peer *); 217 static void parse_poll (int, struct peer *); 218 static void parse_control (int, const struct refclockstat *, struct refclockstat *, struct peer *); 219 220 struct refclock refclock_parse = { 221 parse_start, 222 parse_shutdown, 223 parse_poll, 224 parse_control, 225 noentry, 226 noentry, 227 NOFLAGS 228 }; 229 230 /* 231 * Definitions 232 */ 233 #define MAXUNITS 4 /* maximum number of "PARSE" units permitted */ 234 #define PARSEDEVICE "/dev/refclock-%d" /* device to open %d is unit number */ 235 #define PARSEPPSDEVICE "/dev/refclockpps-%d" /* optional pps device to open %d is unit number */ 236 237 #undef ABS 238 #define ABS(_X_) (((_X_) < 0) ? -(_X_) : (_X_)) 239 240 #define PARSE_HARDPPS_DISABLE 0 241 #define PARSE_HARDPPS_ENABLE 1 242 243 /**=========================================================================== 244 ** function vector for dynamically binding io handling mechanism 245 **/ 246 247 struct parseunit; /* to keep inquiring minds happy */ 248 249 typedef struct bind 250 { 251 const char *bd_description; /* name of type of binding */ 252 int (*bd_init) (struct parseunit *); /* initialize */ 253 void (*bd_end) (struct parseunit *); /* end */ 254 int (*bd_setcs) (struct parseunit *, parsectl_t *); /* set character size */ 255 int (*bd_disable) (struct parseunit *); /* disable */ 256 int (*bd_enable) (struct parseunit *); /* enable */ 257 int (*bd_getfmt) (struct parseunit *, parsectl_t *); /* get format */ 258 int (*bd_setfmt) (struct parseunit *, parsectl_t *); /* setfmt */ 259 int (*bd_timecode) (struct parseunit *, parsectl_t *); /* get time code */ 260 void (*bd_receive) (struct recvbuf *); /* receive operation */ 261 int (*bd_io_input) (struct recvbuf *); /* input operation */ 262 } bind_t; 263 264 #define PARSE_END(_X_) (*(_X_)->binding->bd_end)(_X_) 265 #define PARSE_SETCS(_X_, _CS_) (*(_X_)->binding->bd_setcs)(_X_, _CS_) 266 #define PARSE_ENABLE(_X_) (*(_X_)->binding->bd_enable)(_X_) 267 #define PARSE_DISABLE(_X_) (*(_X_)->binding->bd_disable)(_X_) 268 #define PARSE_GETFMT(_X_, _DCT_) (*(_X_)->binding->bd_getfmt)(_X_, _DCT_) 269 #define PARSE_SETFMT(_X_, _DCT_) (*(_X_)->binding->bd_setfmt)(_X_, _DCT_) 270 #define PARSE_GETTIMECODE(_X_, _DCT_) (*(_X_)->binding->bd_timecode)(_X_, _DCT_) 271 272 /* 273 * special handling flags 274 */ 275 #define PARSE_F_PPSONSECOND 0x00000001 /* PPS pulses are on second */ 276 #define PARSE_F_POWERUPTRUST 0x00000100 /* POWERUP state ist trusted for */ 277 /* trusttime after SYNC was seen */ 278 /**=========================================================================== 279 ** error message regression handling 280 ** 281 ** there are quite a few errors that can occur in rapid succession such as 282 ** noisy input data or no data at all. in order to reduce the amount of 283 ** syslog messages in such case, we are using a backoff algorithm. We limit 284 ** the number of error messages of a certain class to 1 per time unit. if a 285 ** configurable number of messages is displayed that way, we move on to the 286 ** next time unit / count for that class. a count of messages that have been 287 ** suppressed is held and displayed whenever a corresponding message is 288 ** displayed. the time units for a message class will also be displayed. 289 ** whenever an error condition clears we reset the error message state, 290 ** thus we would still generate much output on pathological conditions 291 ** where the system oscillates between OK and NOT OK states. coping 292 ** with that condition is currently considered too complicated. 293 **/ 294 295 #define ERR_ALL (unsigned)~0 /* "all" errors */ 296 #define ERR_BADDATA (unsigned)0 /* unusable input data/conversion errors */ 297 #define ERR_NODATA (unsigned)1 /* no input data */ 298 #define ERR_BADIO (unsigned)2 /* read/write/select errors */ 299 #define ERR_BADSTATUS (unsigned)3 /* unsync states */ 300 #define ERR_BADEVENT (unsigned)4 /* non nominal events */ 301 #define ERR_INTERNAL (unsigned)5 /* internal error */ 302 #define ERR_CNT (unsigned)(ERR_INTERNAL+1) 303 304 #define ERR(_X_) if (list_err(parse, (_X_))) 305 306 struct errorregression 307 { 308 u_long err_count; /* number of repititions per class */ 309 u_long err_delay; /* minimum delay between messages */ 310 }; 311 312 static struct errorregression 313 err_baddata[] = /* error messages for bad input data */ 314 { 315 { 1, 0 }, /* output first message immediately */ 316 { 5, 60 }, /* output next five messages in 60 second intervals */ 317 { 3, 3600 }, /* output next 3 messages in hour intervals */ 318 { 0, 12*3600 } /* repeat messages only every 12 hours */ 319 }; 320 321 static struct errorregression 322 err_nodata[] = /* error messages for missing input data */ 323 { 324 { 1, 0 }, /* output first message immediately */ 325 { 5, 60 }, /* output next five messages in 60 second intervals */ 326 { 3, 3600 }, /* output next 3 messages in hour intervals */ 327 { 0, 12*3600 } /* repeat messages only every 12 hours */ 328 }; 329 330 static struct errorregression 331 err_badstatus[] = /* unsynchronized state messages */ 332 { 333 { 1, 0 }, /* output first message immediately */ 334 { 5, 60 }, /* output next five messages in 60 second intervals */ 335 { 3, 3600 }, /* output next 3 messages in hour intervals */ 336 { 0, 12*3600 } /* repeat messages only every 12 hours */ 337 }; 338 339 static struct errorregression 340 err_badio[] = /* io failures (bad reads, selects, ...) */ 341 { 342 { 1, 0 }, /* output first message immediately */ 343 { 5, 60 }, /* output next five messages in 60 second intervals */ 344 { 5, 3600 }, /* output next 3 messages in hour intervals */ 345 { 0, 12*3600 } /* repeat messages only every 12 hours */ 346 }; 347 348 static struct errorregression 349 err_badevent[] = /* non nominal events */ 350 { 351 { 20, 0 }, /* output first message immediately */ 352 { 6, 60 }, /* output next five messages in 60 second intervals */ 353 { 5, 3600 }, /* output next 3 messages in hour intervals */ 354 { 0, 12*3600 } /* repeat messages only every 12 hours */ 355 }; 356 357 static struct errorregression 358 err_internal[] = /* really bad things - basically coding/OS errors */ 359 { 360 { 0, 0 }, /* output all messages immediately */ 361 }; 362 363 static struct errorregression * 364 err_tbl[] = 365 { 366 err_baddata, 367 err_nodata, 368 err_badio, 369 err_badstatus, 370 err_badevent, 371 err_internal 372 }; 373 374 struct errorinfo 375 { 376 u_long err_started; /* begin time (ntp) of error condition */ 377 u_long err_last; /* last time (ntp) error occurred */ 378 u_long err_cnt; /* number of error repititions */ 379 u_long err_suppressed; /* number of suppressed messages */ 380 struct errorregression *err_stage; /* current error stage */ 381 }; 382 383 /**=========================================================================== 384 ** refclock instance data 385 **/ 386 387 struct parseunit 388 { 389 /* 390 * NTP management 391 */ 392 struct peer *peer; /* backlink to peer structure - refclock inactive if 0 */ 393 struct refclockproc *generic; /* backlink to refclockproc structure */ 394 395 /* 396 * PARSE io 397 */ 398 bind_t *binding; /* io handling binding */ 399 400 /* 401 * parse state 402 */ 403 parse_t parseio; /* io handling structure (user level parsing) */ 404 405 /* 406 * type specific parameters 407 */ 408 struct parse_clockinfo *parse_type; /* link to clock description */ 409 410 /* 411 * clock state handling/reporting 412 */ 413 u_char flags; /* flags (leap_control) */ 414 u_long lastchange; /* time (ntp) when last state change accured */ 415 u_long statetime[CEVNT_MAX+1]; /* accumulated time of clock states */ 416 u_long pollneeddata; /* current_time(!=0) for receive sample expected in PPS mode */ 417 u_short lastformat; /* last format used */ 418 u_long lastsync; /* time (ntp) when clock was last seen fully synchronized */ 419 u_long maxunsync; /* max time in seconds a receiver is trusted after loosing synchronisation */ 420 double ppsphaseadjust; /* phase adjustment of PPS time stamp */ 421 u_long lastmissed; /* time (ntp) when poll didn't get data (powerup heuristic) */ 422 u_long ppsserial; /* magic cookie for ppsclock serials (avoids stale ppsclock data) */ 423 int ppsfd; /* fd to ise for PPS io */ 424 #ifdef HAVE_PPSAPI 425 int hardppsstate; /* current hard pps state */ 426 struct refclock_atom atom; /* PPSAPI structure */ 427 #endif 428 parsetime_t timedata; /* last (parse module) data */ 429 void *localdata; /* optional local, receiver-specific data */ 430 unsigned long localstate; /* private local state */ 431 struct errorinfo errors[ERR_CNT]; /* error state table for suppressing excessive error messages */ 432 struct ctl_var *kv; /* additional pseudo variables */ 433 u_long laststatistic; /* time when staticstics where output */ 434 }; 435 436 437 /**=========================================================================== 438 ** Clockinfo section all parameter for specific clock types 439 ** includes NTP parameters, TTY parameters and IO handling parameters 440 **/ 441 442 static void poll_dpoll (struct parseunit *); 443 static void poll_poll (struct peer *); 444 static int poll_init (struct parseunit *); 445 446 typedef struct poll_info 447 { 448 u_long rate; /* poll rate - once every "rate" seconds - 0 off */ 449 const char *string; /* string to send for polling */ 450 u_long count; /* number of characters in string */ 451 } poll_info_t; 452 453 #define NO_CL_FLAGS 0 454 #define NO_POLL 0 455 #define NO_INIT 0 456 #define NO_END 0 457 #define NO_EVENT 0 458 #define NO_LCLDATA 0 459 #define NO_MESSAGE 0 460 #define NO_PPSDELAY 0 461 462 #define DCF_ID "DCF" /* generic DCF */ 463 #define DCF_A_ID "DCFa" /* AM demodulation */ 464 #define DCF_P_ID "DCFp" /* psuedo random phase shift */ 465 #define GPS_ID "GPS" /* GPS receiver */ 466 467 #define NOCLOCK_ROOTDELAY 0.0 468 #define NOCLOCK_BASEDELAY 0.0 469 #define NOCLOCK_DESCRIPTION 0 470 #define NOCLOCK_MAXUNSYNC 0 471 #define NOCLOCK_CFLAG 0 472 #define NOCLOCK_IFLAG 0 473 #define NOCLOCK_OFLAG 0 474 #define NOCLOCK_LFLAG 0 475 #define NOCLOCK_ID "TILT" 476 #define NOCLOCK_POLL NO_POLL 477 #define NOCLOCK_INIT NO_INIT 478 #define NOCLOCK_END NO_END 479 #define NOCLOCK_DATA NO_LCLDATA 480 #define NOCLOCK_FORMAT "" 481 #define NOCLOCK_TYPE CTL_SST_TS_UNSPEC 482 #define NOCLOCK_SAMPLES 0 483 #define NOCLOCK_KEEP 0 484 485 #define DCF_TYPE CTL_SST_TS_LF 486 #define GPS_TYPE CTL_SST_TS_UHF 487 488 /* 489 * receiver specific constants 490 */ 491 #define MBG_SPEED (B9600) 492 #define MBG_CFLAG (CS7|PARENB|CREAD|CLOCAL|HUPCL|CSTOPB) 493 #define MBG_IFLAG (IGNBRK|IGNPAR|ISTRIP) 494 #define MBG_OFLAG 0 495 #define MBG_LFLAG 0 496 #define MBG_FLAGS PARSE_F_PPSONSECOND 497 498 /* 499 * Meinberg DCF77 receivers 500 */ 501 #define DCFUA31_ROOTDELAY 0.0 /* 0 */ 502 #define DCFUA31_BASEDELAY 0.010 /* 10.7421875ms: 10 ms (+/- 3 ms) */ 503 #define DCFUA31_DESCRIPTION "Meinberg DCF77 C51 or compatible" 504 #define DCFUA31_MAXUNSYNC 60*30 /* only trust clock for 1/2 hour */ 505 #define DCFUA31_SPEED MBG_SPEED 506 #define DCFUA31_CFLAG MBG_CFLAG 507 #define DCFUA31_IFLAG MBG_IFLAG 508 #define DCFUA31_OFLAG MBG_OFLAG 509 #define DCFUA31_LFLAG MBG_LFLAG 510 #define DCFUA31_SAMPLES 5 511 #define DCFUA31_KEEP 3 512 #define DCFUA31_FORMAT "Meinberg Standard" 513 514 /* 515 * Meinberg DCF PZF535/TCXO (FM/PZF) receiver 516 */ 517 #define DCFPZF535_ROOTDELAY 0.0 518 #define DCFPZF535_BASEDELAY 0.001968 /* 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ 519 #define DCFPZF535_DESCRIPTION "Meinberg DCF PZF 535/509 / TCXO" 520 #define DCFPZF535_MAXUNSYNC 60*60*12 /* only trust clock for 12 hours 521 * @ 5e-8df/f we have accumulated 522 * at most 2.16 ms (thus we move to 523 * NTP synchronisation */ 524 #define DCFPZF535_SPEED MBG_SPEED 525 #define DCFPZF535_CFLAG MBG_CFLAG 526 #define DCFPZF535_IFLAG MBG_IFLAG 527 #define DCFPZF535_OFLAG MBG_OFLAG 528 #define DCFPZF535_LFLAG MBG_LFLAG 529 #define DCFPZF535_SAMPLES 5 530 #define DCFPZF535_KEEP 3 531 #define DCFPZF535_FORMAT "Meinberg Standard" 532 533 /* 534 * Meinberg DCF PZF535/OCXO receiver 535 */ 536 #define DCFPZF535OCXO_ROOTDELAY 0.0 537 #define DCFPZF535OCXO_BASEDELAY 0.001968 /* 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ 538 #define DCFPZF535OCXO_DESCRIPTION "Meinberg DCF PZF 535/509 / OCXO" 539 #define DCFPZF535OCXO_MAXUNSYNC 60*60*96 /* only trust clock for 4 days 540 * @ 5e-9df/f we have accumulated 541 * at most an error of 1.73 ms 542 * (thus we move to NTP synchronisation) */ 543 #define DCFPZF535OCXO_SPEED MBG_SPEED 544 #define DCFPZF535OCXO_CFLAG MBG_CFLAG 545 #define DCFPZF535OCXO_IFLAG MBG_IFLAG 546 #define DCFPZF535OCXO_OFLAG MBG_OFLAG 547 #define DCFPZF535OCXO_LFLAG MBG_LFLAG 548 #define DCFPZF535OCXO_SAMPLES 5 549 #define DCFPZF535OCXO_KEEP 3 550 #define DCFPZF535OCXO_FORMAT "Meinberg Standard" 551 552 /* 553 * Meinberg GPS receivers 554 */ 555 static void gps16x_message (struct parseunit *, parsetime_t *); 556 static int gps16x_poll_init (struct parseunit *); 557 558 #define GPS16X_ROOTDELAY 0.0 /* nothing here */ 559 #define GPS16X_BASEDELAY 0.001968 /* XXX to be fixed ! 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ 560 #define GPS16X_DESCRIPTION "Meinberg GPS receiver" 561 #define GPS16X_MAXUNSYNC 60*60*96 /* only trust clock for 4 days 562 * @ 5e-9df/f we have accumulated 563 * at most an error of 1.73 ms 564 * (thus we move to NTP synchronisation) */ 565 #define GPS16X_SPEED B19200 566 #define GPS16X_CFLAG (CS8|CREAD|CLOCAL|HUPCL) 567 #define GPS16X_IFLAG (IGNBRK|IGNPAR) 568 #define GPS16X_OFLAG MBG_OFLAG 569 #define GPS16X_LFLAG MBG_LFLAG 570 #define GPS16X_POLLRATE 6 571 #define GPS16X_POLLCMD "" 572 #define GPS16X_CMDSIZE 0 573 574 static poll_info_t gps16x_pollinfo = { GPS16X_POLLRATE, GPS16X_POLLCMD, GPS16X_CMDSIZE }; 575 576 #define GPS16X_INIT gps16x_poll_init 577 #define GPS16X_POLL 0 578 #define GPS16X_END 0 579 #define GPS16X_DATA ((void *)(&gps16x_pollinfo)) 580 #define GPS16X_MESSAGE gps16x_message 581 #define GPS16X_ID GPS_ID 582 #define GPS16X_FORMAT "Meinberg GPS Extended" 583 #define GPS16X_SAMPLES 5 584 #define GPS16X_KEEP 3 585 586 /* 587 * ELV DCF7000 Wallclock-Receiver/Switching Clock (Kit) 588 * 589 * This is really not the hottest clock - but before you have nothing ... 590 */ 591 #define DCF7000_ROOTDELAY 0.0 /* 0 */ 592 #define DCF7000_BASEDELAY 0.405 /* slow blow */ 593 #define DCF7000_DESCRIPTION "ELV DCF7000" 594 #define DCF7000_MAXUNSYNC (60*5) /* sorry - but it just was not build as a clock */ 595 #define DCF7000_SPEED (B9600) 596 #define DCF7000_CFLAG (CS8|CREAD|PARENB|PARODD|CLOCAL|HUPCL) 597 #define DCF7000_IFLAG (IGNBRK) 598 #define DCF7000_OFLAG 0 599 #define DCF7000_LFLAG 0 600 #define DCF7000_SAMPLES 5 601 #define DCF7000_KEEP 3 602 #define DCF7000_FORMAT "ELV DCF7000" 603 604 /* 605 * Schmid DCF Receiver Kit 606 * 607 * When the WSDCF clock is operating optimally we want the primary clock 608 * distance to come out at 300 ms. Thus, peer.distance in the WSDCF peer 609 * structure is set to 290 ms and we compute delays which are at least 610 * 10 ms long. The following are 290 ms and 10 ms expressed in u_fp format 611 */ 612 #define WS_POLLRATE 1 /* every second - watch interdependency with poll routine */ 613 #define WS_POLLCMD "\163" 614 #define WS_CMDSIZE 1 615 616 static poll_info_t wsdcf_pollinfo = { WS_POLLRATE, WS_POLLCMD, WS_CMDSIZE }; 617 618 #define WSDCF_INIT poll_init 619 #define WSDCF_POLL poll_dpoll 620 #define WSDCF_END 0 621 #define WSDCF_DATA ((void *)(&wsdcf_pollinfo)) 622 #define WSDCF_ROOTDELAY 0.0 /* 0 */ 623 #define WSDCF_BASEDELAY 0.010 /* ~ 10ms */ 624 #define WSDCF_DESCRIPTION "WS/DCF Receiver" 625 #define WSDCF_FORMAT "Schmid" 626 #define WSDCF_MAXUNSYNC (60*60) /* assume this beast hold at 1 h better than 2 ms XXX-must verify */ 627 #define WSDCF_SPEED (B1200) 628 #define WSDCF_CFLAG (CS8|CREAD|CLOCAL) 629 #define WSDCF_IFLAG 0 630 #define WSDCF_OFLAG 0 631 #define WSDCF_LFLAG 0 632 #define WSDCF_SAMPLES 5 633 #define WSDCF_KEEP 3 634 635 /* 636 * RAW DCF77 - input of DCF marks via RS232 - many variants 637 */ 638 #define RAWDCF_FLAGS 0 639 #define RAWDCF_ROOTDELAY 0.0 /* 0 */ 640 #define RAWDCF_BASEDELAY 0.258 641 #define RAWDCF_FORMAT "RAW DCF77 Timecode" 642 #define RAWDCF_MAXUNSYNC (0) /* sorry - its a true receiver - no signal - no time */ 643 #define RAWDCF_SPEED (B50) 644 #ifdef NO_PARENB_IGNPAR /* Was: defined(SYS_IRIX4) || defined(SYS_IRIX5) */ 645 /* somehow doesn't grok PARENB & IGNPAR (mj) */ 646 # define RAWDCF_CFLAG (CS8|CREAD|CLOCAL) 647 #else 648 # define RAWDCF_CFLAG (CS8|CREAD|CLOCAL|PARENB) 649 #endif 650 #ifdef RAWDCF_NO_IGNPAR /* Was: defined(SYS_LINUX) && defined(CLOCK_RAWDCF) */ 651 # define RAWDCF_IFLAG 0 652 #else 653 # define RAWDCF_IFLAG (IGNPAR) 654 #endif 655 #define RAWDCF_OFLAG 0 656 #define RAWDCF_LFLAG 0 657 #define RAWDCF_SAMPLES 20 658 #define RAWDCF_KEEP 12 659 #define RAWDCF_INIT 0 660 661 /* 662 * RAW DCF variants 663 */ 664 /* 665 * Conrad receiver 666 * 667 * simplest (cheapest) DCF clock - e. g. DCF77 receiver by Conrad 668 * (~40DM - roughly $30 ) followed by a level converter for RS232 669 */ 670 #define CONRAD_BASEDELAY 0.292 /* Conrad receiver @ 50 Baud on a Sun */ 671 #define CONRAD_DESCRIPTION "RAW DCF77 CODE (Conrad DCF77 receiver module)" 672 673 /* Gude Analog- und Digitalsystem GmbH 'Expert mouseCLOCK USB v2.0' */ 674 #define GUDE_EMC_USB_V20_SPEED (B4800) 675 #define GUDE_EMC_USB_V20_BASEDELAY 0.425 /* USB serial<->USB converter FTDI232R */ 676 #define GUDE_EMC_USB_V20_DESCRIPTION "RAW DCF77 CODE (Expert mouseCLOCK USB v2.0)" 677 678 /* 679 * TimeBrick receiver 680 */ 681 #define TIMEBRICK_BASEDELAY 0.210 /* TimeBrick @ 50 Baud on a Sun */ 682 #define TIMEBRICK_DESCRIPTION "RAW DCF77 CODE (TimeBrick)" 683 684 /* 685 * IGEL:clock receiver 686 */ 687 #define IGELCLOCK_BASEDELAY 0.258 /* IGEL:clock receiver */ 688 #define IGELCLOCK_DESCRIPTION "RAW DCF77 CODE (IGEL:clock)" 689 #define IGELCLOCK_SPEED (B1200) 690 #define IGELCLOCK_CFLAG (CS8|CREAD|HUPCL|CLOCAL) 691 692 /* 693 * RAWDCF receivers that need to be powered from DTR 694 * (like Expert mouse clock) 695 */ 696 static int rawdcf_init_1 (struct parseunit *); 697 #define RAWDCFDTRSET_DESCRIPTION "RAW DCF77 CODE (DTR SET/RTS CLR)" 698 #define RAWDCFDTRSET75_DESCRIPTION "RAW DCF77 CODE (DTR SET/RTS CLR @ 75 baud)" 699 #define RAWDCFDTRSET_INIT rawdcf_init_1 700 701 /* 702 * RAWDCF receivers that need to be powered from 703 * DTR CLR and RTS SET 704 */ 705 static int rawdcf_init_2 (struct parseunit *); 706 #define RAWDCFDTRCLRRTSSET_DESCRIPTION "RAW DCF77 CODE (DTR CLR/RTS SET)" 707 #define RAWDCFDTRCLRRTSSET75_DESCRIPTION "RAW DCF77 CODE (DTR CLR/RTS SET @ 75 baud)" 708 #define RAWDCFDTRCLRRTSSET_INIT rawdcf_init_2 709 710 /* 711 * Trimble GPS receivers (TAIP and TSIP protocols) 712 */ 713 #ifndef TRIM_POLLRATE 714 #define TRIM_POLLRATE 0 /* only true direct polling */ 715 #endif 716 717 #define TRIM_TAIPPOLLCMD ">SRM;FR_FLAG=F;EC_FLAG=F<>QTM<" 718 #define TRIM_TAIPCMDSIZE (sizeof(TRIM_TAIPPOLLCMD)-1) 719 720 static poll_info_t trimbletaip_pollinfo = { TRIM_POLLRATE, TRIM_TAIPPOLLCMD, TRIM_TAIPCMDSIZE }; 721 static int trimbletaip_init (struct parseunit *); 722 static void trimbletaip_event (struct parseunit *, int); 723 724 /* query time & UTC correction data */ 725 static char tsipquery[] = { DLE, 0x21, DLE, ETX, DLE, 0x2F, DLE, ETX }; 726 727 static poll_info_t trimbletsip_pollinfo = { TRIM_POLLRATE, tsipquery, sizeof(tsipquery) }; 728 static int trimbletsip_init (struct parseunit *); 729 static void trimbletsip_end (struct parseunit *); 730 static void trimbletsip_message (struct parseunit *, parsetime_t *); 731 static void trimbletsip_event (struct parseunit *, int); 732 733 #define TRIMBLETSIP_IDLE_TIME (300) /* 5 minutes silence at most */ 734 #define TRIMBLE_RESET_HOLDOFF TRIMBLETSIP_IDLE_TIME 735 736 #define TRIMBLETAIP_SPEED (B4800) 737 #define TRIMBLETAIP_CFLAG (CS8|CREAD|CLOCAL) 738 #define TRIMBLETAIP_IFLAG (BRKINT|IGNPAR|ISTRIP|ICRNL|IXON) 739 #define TRIMBLETAIP_OFLAG (OPOST|ONLCR) 740 #define TRIMBLETAIP_LFLAG (0) 741 742 #define TRIMBLETSIP_SPEED (B9600) 743 #define TRIMBLETSIP_CFLAG (CS8|CLOCAL|CREAD|PARENB|PARODD) 744 #define TRIMBLETSIP_IFLAG (IGNBRK) 745 #define TRIMBLETSIP_OFLAG (0) 746 #define TRIMBLETSIP_LFLAG (ICANON) 747 748 #define TRIMBLETSIP_SAMPLES 5 749 #define TRIMBLETSIP_KEEP 3 750 #define TRIMBLETAIP_SAMPLES 5 751 #define TRIMBLETAIP_KEEP 3 752 753 #define TRIMBLETAIP_FLAGS (PARSE_F_PPSONSECOND) 754 #define TRIMBLETSIP_FLAGS (TRIMBLETAIP_FLAGS) 755 756 #define TRIMBLETAIP_POLL poll_dpoll 757 #define TRIMBLETSIP_POLL poll_dpoll 758 759 #define TRIMBLETAIP_INIT trimbletaip_init 760 #define TRIMBLETSIP_INIT trimbletsip_init 761 762 #define TRIMBLETAIP_EVENT trimbletaip_event 763 764 #define TRIMBLETSIP_EVENT trimbletsip_event 765 #define TRIMBLETSIP_MESSAGE trimbletsip_message 766 767 #define TRIMBLETAIP_END 0 768 #define TRIMBLETSIP_END trimbletsip_end 769 770 #define TRIMBLETAIP_DATA ((void *)(&trimbletaip_pollinfo)) 771 #define TRIMBLETSIP_DATA ((void *)(&trimbletsip_pollinfo)) 772 773 #define TRIMBLETAIP_ID GPS_ID 774 #define TRIMBLETSIP_ID GPS_ID 775 776 #define TRIMBLETAIP_FORMAT "Trimble TAIP" 777 #define TRIMBLETSIP_FORMAT "Trimble TSIP" 778 779 #define TRIMBLETAIP_ROOTDELAY 0x0 780 #define TRIMBLETSIP_ROOTDELAY 0x0 781 782 #define TRIMBLETAIP_BASEDELAY 0.0 783 #define TRIMBLETSIP_BASEDELAY 0.020 /* GPS time message latency */ 784 785 #define TRIMBLETAIP_DESCRIPTION "Trimble GPS (TAIP) receiver" 786 #define TRIMBLETSIP_DESCRIPTION "Trimble GPS (TSIP) receiver" 787 788 #define TRIMBLETAIP_MAXUNSYNC 0 789 #define TRIMBLETSIP_MAXUNSYNC 0 790 791 #define TRIMBLETAIP_EOL '<' 792 793 /* 794 * RadioCode Clocks RCC 800 receiver 795 */ 796 #define RCC_POLLRATE 0 /* only true direct polling */ 797 #define RCC_POLLCMD "\r" 798 #define RCC_CMDSIZE 1 799 800 static poll_info_t rcc8000_pollinfo = { RCC_POLLRATE, RCC_POLLCMD, RCC_CMDSIZE }; 801 #define RCC8000_FLAGS 0 802 #define RCC8000_POLL poll_dpoll 803 #define RCC8000_INIT poll_init 804 #define RCC8000_END 0 805 #define RCC8000_DATA ((void *)(&rcc8000_pollinfo)) 806 #define RCC8000_ROOTDELAY 0.0 807 #define RCC8000_BASEDELAY 0.0 808 #define RCC8000_ID "MSF" 809 #define RCC8000_DESCRIPTION "RCC 8000 MSF Receiver" 810 #define RCC8000_FORMAT "Radiocode RCC8000" 811 #define RCC8000_MAXUNSYNC (60*60) /* should be ok for an hour */ 812 #define RCC8000_SPEED (B2400) 813 #define RCC8000_CFLAG (CS8|CREAD|CLOCAL) 814 #define RCC8000_IFLAG (IGNBRK|IGNPAR) 815 #define RCC8000_OFLAG 0 816 #define RCC8000_LFLAG 0 817 #define RCC8000_SAMPLES 5 818 #define RCC8000_KEEP 3 819 820 /* 821 * Hopf Radio clock 6021 Format 822 * 823 */ 824 #define HOPF6021_ROOTDELAY 0.0 825 #define HOPF6021_BASEDELAY 0.0 826 #define HOPF6021_DESCRIPTION "HOPF 6021" 827 #define HOPF6021_FORMAT "hopf Funkuhr 6021" 828 #define HOPF6021_MAXUNSYNC (60*60) /* should be ok for an hour */ 829 #define HOPF6021_SPEED (B9600) 830 #define HOPF6021_CFLAG (CS8|CREAD|CLOCAL) 831 #define HOPF6021_IFLAG (IGNBRK|ISTRIP) 832 #define HOPF6021_OFLAG 0 833 #define HOPF6021_LFLAG 0 834 #define HOPF6021_FLAGS 0 835 #define HOPF6021_SAMPLES 5 836 #define HOPF6021_KEEP 3 837 838 /* 839 * Diem's Computime Radio Clock Receiver 840 */ 841 #define COMPUTIME_FLAGS 0 842 #define COMPUTIME_ROOTDELAY 0.0 843 #define COMPUTIME_BASEDELAY 0.0 844 #define COMPUTIME_ID DCF_ID 845 #define COMPUTIME_DESCRIPTION "Diem's Computime receiver" 846 #define COMPUTIME_FORMAT "Diem's Computime Radio Clock" 847 #define COMPUTIME_TYPE DCF_TYPE 848 #define COMPUTIME_MAXUNSYNC (60*60) /* only trust clock for 1 hour */ 849 #define COMPUTIME_SPEED (B9600) 850 #define COMPUTIME_CFLAG (CSTOPB|CS7|CREAD|CLOCAL) 851 #define COMPUTIME_IFLAG (IGNBRK|IGNPAR|ISTRIP) 852 #define COMPUTIME_OFLAG 0 853 #define COMPUTIME_LFLAG 0 854 #define COMPUTIME_SAMPLES 5 855 #define COMPUTIME_KEEP 3 856 857 /* 858 * Varitext Radio Clock Receiver 859 */ 860 #define VARITEXT_FLAGS 0 861 #define VARITEXT_ROOTDELAY 0.0 862 #define VARITEXT_BASEDELAY 0.0 863 #define VARITEXT_ID "MSF" 864 #define VARITEXT_DESCRIPTION "Varitext receiver" 865 #define VARITEXT_FORMAT "Varitext Radio Clock" 866 #define VARITEXT_TYPE DCF_TYPE 867 #define VARITEXT_MAXUNSYNC (60*60) /* only trust clock for 1 hour */ 868 #define VARITEXT_SPEED (B9600) 869 #define VARITEXT_CFLAG (CS7|CREAD|CLOCAL|PARENB|PARODD) 870 #define VARITEXT_IFLAG (IGNPAR|IGNBRK|INPCK) /*|ISTRIP)*/ 871 #define VARITEXT_OFLAG 0 872 #define VARITEXT_LFLAG 0 873 #define VARITEXT_SAMPLES 32 874 #define VARITEXT_KEEP 20 875 876 /* 877 * SEL240x Satellite Sychronized Clock 878 */ 879 #define SEL240X_POLLRATE 0 /* only true direct polling */ 880 #define SEL240X_POLLCMD "BUB8" 881 #define SEL240X_CMDSIZE 4 882 883 static poll_info_t sel240x_pollinfo = { SEL240X_POLLRATE, 884 SEL240X_POLLCMD, 885 SEL240X_CMDSIZE }; 886 #define SEL240X_FLAGS (PARSE_F_PPSONSECOND) 887 #define SEL240X_POLL poll_dpoll 888 #define SEL240X_INIT poll_init 889 #define SEL240X_END 0 890 #define SEL240X_DATA ((void *)(&sel240x_pollinfo)) 891 #define SEL240X_ROOTDELAY 0.0 892 #define SEL240X_BASEDELAY 0.0 893 #define SEL240X_ID GPS_ID 894 #define SEL240X_DESCRIPTION "SEL240x Satellite Synchronized Clock" 895 #define SEL240X_FORMAT "SEL B8" 896 #define SEL240X_MAXUNSYNC 60*60*12 /* only trust clock for 12 hours */ 897 #define SEL240X_SPEED (B9600) 898 #define SEL240X_CFLAG (CS8|CREAD|CLOCAL) 899 #define SEL240X_IFLAG (IGNBRK|IGNPAR) 900 #define SEL240X_OFLAG (0) 901 #define SEL240X_LFLAG (0) 902 #define SEL240X_SAMPLES 5 903 #define SEL240X_KEEP 3 904 905 static struct parse_clockinfo 906 { 907 u_long cl_flags; /* operation flags (PPS interpretation, trust handling) */ 908 void (*cl_poll) (struct parseunit *); /* active poll routine */ 909 int (*cl_init) (struct parseunit *); /* active poll init routine */ 910 void (*cl_event) (struct parseunit *, int); /* special event handling (e.g. reset clock) */ 911 void (*cl_end) (struct parseunit *); /* active poll end routine */ 912 void (*cl_message) (struct parseunit *, parsetime_t *); /* process a lower layer message */ 913 void *cl_data; /* local data area for "poll" mechanism */ 914 double cl_rootdelay; /* rootdelay */ 915 double cl_basedelay; /* current offset by which the RS232 916 time code is delayed from the actual time */ 917 const char *cl_id; /* ID code */ 918 const char *cl_description; /* device name */ 919 const char *cl_format; /* fixed format */ 920 u_char cl_type; /* clock type (ntp control) */ 921 u_long cl_maxunsync; /* time to trust oscillator after losing synch */ 922 u_long cl_speed; /* terminal input & output baudrate */ 923 u_long cl_cflag; /* terminal control flags */ 924 u_long cl_iflag; /* terminal input flags */ 925 u_long cl_oflag; /* terminal output flags */ 926 u_long cl_lflag; /* terminal local flags */ 927 u_long cl_samples; /* samples for median filter */ 928 u_long cl_keep; /* samples for median filter to keep */ 929 } parse_clockinfo[] = 930 { 931 { /* mode 0 */ 932 MBG_FLAGS, 933 NO_POLL, 934 NO_INIT, 935 NO_EVENT, 936 NO_END, 937 NO_MESSAGE, 938 NO_LCLDATA, 939 DCFPZF535_ROOTDELAY, 940 DCFPZF535_BASEDELAY, 941 DCF_P_ID, 942 DCFPZF535_DESCRIPTION, 943 DCFPZF535_FORMAT, 944 DCF_TYPE, 945 DCFPZF535_MAXUNSYNC, 946 DCFPZF535_SPEED, 947 DCFPZF535_CFLAG, 948 DCFPZF535_IFLAG, 949 DCFPZF535_OFLAG, 950 DCFPZF535_LFLAG, 951 DCFPZF535_SAMPLES, 952 DCFPZF535_KEEP 953 }, 954 { /* mode 1 */ 955 MBG_FLAGS, 956 NO_POLL, 957 NO_INIT, 958 NO_EVENT, 959 NO_END, 960 NO_MESSAGE, 961 NO_LCLDATA, 962 DCFPZF535OCXO_ROOTDELAY, 963 DCFPZF535OCXO_BASEDELAY, 964 DCF_P_ID, 965 DCFPZF535OCXO_DESCRIPTION, 966 DCFPZF535OCXO_FORMAT, 967 DCF_TYPE, 968 DCFPZF535OCXO_MAXUNSYNC, 969 DCFPZF535OCXO_SPEED, 970 DCFPZF535OCXO_CFLAG, 971 DCFPZF535OCXO_IFLAG, 972 DCFPZF535OCXO_OFLAG, 973 DCFPZF535OCXO_LFLAG, 974 DCFPZF535OCXO_SAMPLES, 975 DCFPZF535OCXO_KEEP 976 }, 977 { /* mode 2 */ 978 MBG_FLAGS, 979 NO_POLL, 980 NO_INIT, 981 NO_EVENT, 982 NO_END, 983 NO_MESSAGE, 984 NO_LCLDATA, 985 DCFUA31_ROOTDELAY, 986 DCFUA31_BASEDELAY, 987 DCF_A_ID, 988 DCFUA31_DESCRIPTION, 989 DCFUA31_FORMAT, 990 DCF_TYPE, 991 DCFUA31_MAXUNSYNC, 992 DCFUA31_SPEED, 993 DCFUA31_CFLAG, 994 DCFUA31_IFLAG, 995 DCFUA31_OFLAG, 996 DCFUA31_LFLAG, 997 DCFUA31_SAMPLES, 998 DCFUA31_KEEP 999 }, 1000 { /* mode 3 */ 1001 MBG_FLAGS, 1002 NO_POLL, 1003 NO_INIT, 1004 NO_EVENT, 1005 NO_END, 1006 NO_MESSAGE, 1007 NO_LCLDATA, 1008 DCF7000_ROOTDELAY, 1009 DCF7000_BASEDELAY, 1010 DCF_A_ID, 1011 DCF7000_DESCRIPTION, 1012 DCF7000_FORMAT, 1013 DCF_TYPE, 1014 DCF7000_MAXUNSYNC, 1015 DCF7000_SPEED, 1016 DCF7000_CFLAG, 1017 DCF7000_IFLAG, 1018 DCF7000_OFLAG, 1019 DCF7000_LFLAG, 1020 DCF7000_SAMPLES, 1021 DCF7000_KEEP 1022 }, 1023 { /* mode 4 */ 1024 NO_CL_FLAGS, 1025 WSDCF_POLL, 1026 WSDCF_INIT, 1027 NO_EVENT, 1028 WSDCF_END, 1029 NO_MESSAGE, 1030 WSDCF_DATA, 1031 WSDCF_ROOTDELAY, 1032 WSDCF_BASEDELAY, 1033 DCF_A_ID, 1034 WSDCF_DESCRIPTION, 1035 WSDCF_FORMAT, 1036 DCF_TYPE, 1037 WSDCF_MAXUNSYNC, 1038 WSDCF_SPEED, 1039 WSDCF_CFLAG, 1040 WSDCF_IFLAG, 1041 WSDCF_OFLAG, 1042 WSDCF_LFLAG, 1043 WSDCF_SAMPLES, 1044 WSDCF_KEEP 1045 }, 1046 { /* mode 5 */ 1047 RAWDCF_FLAGS, 1048 NO_POLL, 1049 RAWDCF_INIT, 1050 NO_EVENT, 1051 NO_END, 1052 NO_MESSAGE, 1053 NO_LCLDATA, 1054 RAWDCF_ROOTDELAY, 1055 CONRAD_BASEDELAY, 1056 DCF_A_ID, 1057 CONRAD_DESCRIPTION, 1058 RAWDCF_FORMAT, 1059 DCF_TYPE, 1060 RAWDCF_MAXUNSYNC, 1061 RAWDCF_SPEED, 1062 RAWDCF_CFLAG, 1063 RAWDCF_IFLAG, 1064 RAWDCF_OFLAG, 1065 RAWDCF_LFLAG, 1066 RAWDCF_SAMPLES, 1067 RAWDCF_KEEP 1068 }, 1069 { /* mode 6 */ 1070 RAWDCF_FLAGS, 1071 NO_POLL, 1072 RAWDCF_INIT, 1073 NO_EVENT, 1074 NO_END, 1075 NO_MESSAGE, 1076 NO_LCLDATA, 1077 RAWDCF_ROOTDELAY, 1078 TIMEBRICK_BASEDELAY, 1079 DCF_A_ID, 1080 TIMEBRICK_DESCRIPTION, 1081 RAWDCF_FORMAT, 1082 DCF_TYPE, 1083 RAWDCF_MAXUNSYNC, 1084 RAWDCF_SPEED, 1085 RAWDCF_CFLAG, 1086 RAWDCF_IFLAG, 1087 RAWDCF_OFLAG, 1088 RAWDCF_LFLAG, 1089 RAWDCF_SAMPLES, 1090 RAWDCF_KEEP 1091 }, 1092 { /* mode 7 */ 1093 MBG_FLAGS, 1094 GPS16X_POLL, 1095 GPS16X_INIT, 1096 NO_EVENT, 1097 GPS16X_END, 1098 GPS16X_MESSAGE, 1099 GPS16X_DATA, 1100 GPS16X_ROOTDELAY, 1101 GPS16X_BASEDELAY, 1102 GPS16X_ID, 1103 GPS16X_DESCRIPTION, 1104 GPS16X_FORMAT, 1105 GPS_TYPE, 1106 GPS16X_MAXUNSYNC, 1107 GPS16X_SPEED, 1108 GPS16X_CFLAG, 1109 GPS16X_IFLAG, 1110 GPS16X_OFLAG, 1111 GPS16X_LFLAG, 1112 GPS16X_SAMPLES, 1113 GPS16X_KEEP 1114 }, 1115 { /* mode 8 */ 1116 RAWDCF_FLAGS, 1117 NO_POLL, 1118 NO_INIT, 1119 NO_EVENT, 1120 NO_END, 1121 NO_MESSAGE, 1122 NO_LCLDATA, 1123 RAWDCF_ROOTDELAY, 1124 IGELCLOCK_BASEDELAY, 1125 DCF_A_ID, 1126 IGELCLOCK_DESCRIPTION, 1127 RAWDCF_FORMAT, 1128 DCF_TYPE, 1129 RAWDCF_MAXUNSYNC, 1130 IGELCLOCK_SPEED, 1131 IGELCLOCK_CFLAG, 1132 RAWDCF_IFLAG, 1133 RAWDCF_OFLAG, 1134 RAWDCF_LFLAG, 1135 RAWDCF_SAMPLES, 1136 RAWDCF_KEEP 1137 }, 1138 { /* mode 9 */ 1139 TRIMBLETAIP_FLAGS, 1140 #if TRIM_POLLRATE /* DHD940515: Allow user config */ 1141 NO_POLL, 1142 #else 1143 TRIMBLETAIP_POLL, 1144 #endif 1145 TRIMBLETAIP_INIT, 1146 TRIMBLETAIP_EVENT, 1147 TRIMBLETAIP_END, 1148 NO_MESSAGE, 1149 TRIMBLETAIP_DATA, 1150 TRIMBLETAIP_ROOTDELAY, 1151 TRIMBLETAIP_BASEDELAY, 1152 TRIMBLETAIP_ID, 1153 TRIMBLETAIP_DESCRIPTION, 1154 TRIMBLETAIP_FORMAT, 1155 GPS_TYPE, 1156 TRIMBLETAIP_MAXUNSYNC, 1157 TRIMBLETAIP_SPEED, 1158 TRIMBLETAIP_CFLAG, 1159 TRIMBLETAIP_IFLAG, 1160 TRIMBLETAIP_OFLAG, 1161 TRIMBLETAIP_LFLAG, 1162 TRIMBLETAIP_SAMPLES, 1163 TRIMBLETAIP_KEEP 1164 }, 1165 { /* mode 10 */ 1166 TRIMBLETSIP_FLAGS, 1167 #if TRIM_POLLRATE /* DHD940515: Allow user config */ 1168 NO_POLL, 1169 #else 1170 TRIMBLETSIP_POLL, 1171 #endif 1172 TRIMBLETSIP_INIT, 1173 TRIMBLETSIP_EVENT, 1174 TRIMBLETSIP_END, 1175 TRIMBLETSIP_MESSAGE, 1176 TRIMBLETSIP_DATA, 1177 TRIMBLETSIP_ROOTDELAY, 1178 TRIMBLETSIP_BASEDELAY, 1179 TRIMBLETSIP_ID, 1180 TRIMBLETSIP_DESCRIPTION, 1181 TRIMBLETSIP_FORMAT, 1182 GPS_TYPE, 1183 TRIMBLETSIP_MAXUNSYNC, 1184 TRIMBLETSIP_SPEED, 1185 TRIMBLETSIP_CFLAG, 1186 TRIMBLETSIP_IFLAG, 1187 TRIMBLETSIP_OFLAG, 1188 TRIMBLETSIP_LFLAG, 1189 TRIMBLETSIP_SAMPLES, 1190 TRIMBLETSIP_KEEP 1191 }, 1192 { /* mode 11 */ 1193 NO_CL_FLAGS, 1194 RCC8000_POLL, 1195 RCC8000_INIT, 1196 NO_EVENT, 1197 RCC8000_END, 1198 NO_MESSAGE, 1199 RCC8000_DATA, 1200 RCC8000_ROOTDELAY, 1201 RCC8000_BASEDELAY, 1202 RCC8000_ID, 1203 RCC8000_DESCRIPTION, 1204 RCC8000_FORMAT, 1205 DCF_TYPE, 1206 RCC8000_MAXUNSYNC, 1207 RCC8000_SPEED, 1208 RCC8000_CFLAG, 1209 RCC8000_IFLAG, 1210 RCC8000_OFLAG, 1211 RCC8000_LFLAG, 1212 RCC8000_SAMPLES, 1213 RCC8000_KEEP 1214 }, 1215 { /* mode 12 */ 1216 HOPF6021_FLAGS, 1217 NO_POLL, 1218 NO_INIT, 1219 NO_EVENT, 1220 NO_END, 1221 NO_MESSAGE, 1222 NO_LCLDATA, 1223 HOPF6021_ROOTDELAY, 1224 HOPF6021_BASEDELAY, 1225 DCF_ID, 1226 HOPF6021_DESCRIPTION, 1227 HOPF6021_FORMAT, 1228 DCF_TYPE, 1229 HOPF6021_MAXUNSYNC, 1230 HOPF6021_SPEED, 1231 HOPF6021_CFLAG, 1232 HOPF6021_IFLAG, 1233 HOPF6021_OFLAG, 1234 HOPF6021_LFLAG, 1235 HOPF6021_SAMPLES, 1236 HOPF6021_KEEP 1237 }, 1238 { /* mode 13 */ 1239 COMPUTIME_FLAGS, 1240 NO_POLL, 1241 NO_INIT, 1242 NO_EVENT, 1243 NO_END, 1244 NO_MESSAGE, 1245 NO_LCLDATA, 1246 COMPUTIME_ROOTDELAY, 1247 COMPUTIME_BASEDELAY, 1248 COMPUTIME_ID, 1249 COMPUTIME_DESCRIPTION, 1250 COMPUTIME_FORMAT, 1251 COMPUTIME_TYPE, 1252 COMPUTIME_MAXUNSYNC, 1253 COMPUTIME_SPEED, 1254 COMPUTIME_CFLAG, 1255 COMPUTIME_IFLAG, 1256 COMPUTIME_OFLAG, 1257 COMPUTIME_LFLAG, 1258 COMPUTIME_SAMPLES, 1259 COMPUTIME_KEEP 1260 }, 1261 { /* mode 14 */ 1262 RAWDCF_FLAGS, 1263 NO_POLL, 1264 RAWDCFDTRSET_INIT, 1265 NO_EVENT, 1266 NO_END, 1267 NO_MESSAGE, 1268 NO_LCLDATA, 1269 RAWDCF_ROOTDELAY, 1270 RAWDCF_BASEDELAY, 1271 DCF_A_ID, 1272 RAWDCFDTRSET_DESCRIPTION, 1273 RAWDCF_FORMAT, 1274 DCF_TYPE, 1275 RAWDCF_MAXUNSYNC, 1276 RAWDCF_SPEED, 1277 RAWDCF_CFLAG, 1278 RAWDCF_IFLAG, 1279 RAWDCF_OFLAG, 1280 RAWDCF_LFLAG, 1281 RAWDCF_SAMPLES, 1282 RAWDCF_KEEP 1283 }, 1284 { /* mode 15 */ 1285 0, /* operation flags (io modes) */ 1286 NO_POLL, /* active poll routine */ 1287 NO_INIT, /* active poll init routine */ 1288 NO_EVENT, /* special event handling (e.g. reset clock) */ 1289 NO_END, /* active poll end routine */ 1290 NO_MESSAGE, /* process a lower layer message */ 1291 NO_LCLDATA, /* local data area for "poll" mechanism */ 1292 0, /* rootdelay */ 1293 11.0 /* bits */ / 9600, /* current offset by which the RS232 1294 time code is delayed from the actual time */ 1295 DCF_ID, /* ID code */ 1296 "WHARTON 400A Series clock", /* device name */ 1297 "WHARTON 400A Series clock Output Format 1", /* fixed format */ 1298 /* Must match a format-name in a libparse/clk_xxx.c file */ 1299 DCF_TYPE, /* clock type (ntp control) */ 1300 (1*60*60), /* time to trust oscillator after losing synch */ 1301 B9600, /* terminal input & output baudrate */ 1302 (CS8|CREAD|PARENB|CLOCAL|HUPCL),/* terminal control flags */ 1303 0, /* terminal input flags */ 1304 0, /* terminal output flags */ 1305 0, /* terminal local flags */ 1306 5, /* samples for median filter */ 1307 3, /* samples for median filter to keep */ 1308 }, 1309 { /* mode 16 - RAWDCF RTS set, DTR clr */ 1310 RAWDCF_FLAGS, 1311 NO_POLL, 1312 RAWDCFDTRCLRRTSSET_INIT, 1313 NO_EVENT, 1314 NO_END, 1315 NO_MESSAGE, 1316 NO_LCLDATA, 1317 RAWDCF_ROOTDELAY, 1318 RAWDCF_BASEDELAY, 1319 DCF_A_ID, 1320 RAWDCFDTRCLRRTSSET_DESCRIPTION, 1321 RAWDCF_FORMAT, 1322 DCF_TYPE, 1323 RAWDCF_MAXUNSYNC, 1324 RAWDCF_SPEED, 1325 RAWDCF_CFLAG, 1326 RAWDCF_IFLAG, 1327 RAWDCF_OFLAG, 1328 RAWDCF_LFLAG, 1329 RAWDCF_SAMPLES, 1330 RAWDCF_KEEP 1331 }, 1332 { /* mode 17 */ 1333 VARITEXT_FLAGS, 1334 NO_POLL, 1335 NO_INIT, 1336 NO_EVENT, 1337 NO_END, 1338 NO_MESSAGE, 1339 NO_LCLDATA, 1340 VARITEXT_ROOTDELAY, 1341 VARITEXT_BASEDELAY, 1342 VARITEXT_ID, 1343 VARITEXT_DESCRIPTION, 1344 VARITEXT_FORMAT, 1345 VARITEXT_TYPE, 1346 VARITEXT_MAXUNSYNC, 1347 VARITEXT_SPEED, 1348 VARITEXT_CFLAG, 1349 VARITEXT_IFLAG, 1350 VARITEXT_OFLAG, 1351 VARITEXT_LFLAG, 1352 VARITEXT_SAMPLES, 1353 VARITEXT_KEEP 1354 }, 1355 { /* mode 18 */ 1356 MBG_FLAGS, 1357 NO_POLL, 1358 NO_INIT, 1359 NO_EVENT, 1360 GPS16X_END, 1361 GPS16X_MESSAGE, 1362 GPS16X_DATA, 1363 GPS16X_ROOTDELAY, 1364 GPS16X_BASEDELAY, 1365 GPS16X_ID, 1366 GPS16X_DESCRIPTION, 1367 GPS16X_FORMAT, 1368 GPS_TYPE, 1369 GPS16X_MAXUNSYNC, 1370 GPS16X_SPEED, 1371 GPS16X_CFLAG, 1372 GPS16X_IFLAG, 1373 GPS16X_OFLAG, 1374 GPS16X_LFLAG, 1375 GPS16X_SAMPLES, 1376 GPS16X_KEEP 1377 }, 1378 { /* mode 19 */ 1379 RAWDCF_FLAGS, 1380 NO_POLL, 1381 RAWDCF_INIT, 1382 NO_EVENT, 1383 NO_END, 1384 NO_MESSAGE, 1385 NO_LCLDATA, 1386 RAWDCF_ROOTDELAY, 1387 GUDE_EMC_USB_V20_BASEDELAY, 1388 DCF_A_ID, 1389 GUDE_EMC_USB_V20_DESCRIPTION, 1390 RAWDCF_FORMAT, 1391 DCF_TYPE, 1392 RAWDCF_MAXUNSYNC, 1393 GUDE_EMC_USB_V20_SPEED, 1394 RAWDCF_CFLAG, 1395 RAWDCF_IFLAG, 1396 RAWDCF_OFLAG, 1397 RAWDCF_LFLAG, 1398 RAWDCF_SAMPLES, 1399 RAWDCF_KEEP 1400 }, 1401 { /* mode 20, like mode 14 but driven by 75 baud */ 1402 RAWDCF_FLAGS, 1403 NO_POLL, 1404 RAWDCFDTRSET_INIT, 1405 NO_EVENT, 1406 NO_END, 1407 NO_MESSAGE, 1408 NO_LCLDATA, 1409 RAWDCF_ROOTDELAY, 1410 RAWDCF_BASEDELAY, 1411 DCF_A_ID, 1412 RAWDCFDTRSET75_DESCRIPTION, 1413 RAWDCF_FORMAT, 1414 DCF_TYPE, 1415 RAWDCF_MAXUNSYNC, 1416 B75, 1417 RAWDCF_CFLAG, 1418 RAWDCF_IFLAG, 1419 RAWDCF_OFLAG, 1420 RAWDCF_LFLAG, 1421 RAWDCF_SAMPLES, 1422 RAWDCF_KEEP 1423 }, 1424 { /* mode 21, like mode 16 but driven by 75 baud 1425 - RAWDCF RTS set, DTR clr */ 1426 RAWDCF_FLAGS, 1427 NO_POLL, 1428 RAWDCFDTRCLRRTSSET_INIT, 1429 NO_EVENT, 1430 NO_END, 1431 NO_MESSAGE, 1432 NO_LCLDATA, 1433 RAWDCF_ROOTDELAY, 1434 RAWDCF_BASEDELAY, 1435 DCF_A_ID, 1436 RAWDCFDTRCLRRTSSET75_DESCRIPTION, 1437 RAWDCF_FORMAT, 1438 DCF_TYPE, 1439 RAWDCF_MAXUNSYNC, 1440 B75, 1441 RAWDCF_CFLAG, 1442 RAWDCF_IFLAG, 1443 RAWDCF_OFLAG, 1444 RAWDCF_LFLAG, 1445 RAWDCF_SAMPLES, 1446 RAWDCF_KEEP 1447 }, 1448 { /* mode 22 - like 2 with POWERUP trust */ 1449 MBG_FLAGS | PARSE_F_POWERUPTRUST, 1450 NO_POLL, 1451 NO_INIT, 1452 NO_EVENT, 1453 NO_END, 1454 NO_MESSAGE, 1455 NO_LCLDATA, 1456 DCFUA31_ROOTDELAY, 1457 DCFUA31_BASEDELAY, 1458 DCF_A_ID, 1459 DCFUA31_DESCRIPTION, 1460 DCFUA31_FORMAT, 1461 DCF_TYPE, 1462 DCFUA31_MAXUNSYNC, 1463 DCFUA31_SPEED, 1464 DCFUA31_CFLAG, 1465 DCFUA31_IFLAG, 1466 DCFUA31_OFLAG, 1467 DCFUA31_LFLAG, 1468 DCFUA31_SAMPLES, 1469 DCFUA31_KEEP 1470 }, 1471 { /* mode 23 - like 7 with POWERUP trust */ 1472 MBG_FLAGS | PARSE_F_POWERUPTRUST, 1473 GPS16X_POLL, 1474 GPS16X_INIT, 1475 NO_EVENT, 1476 GPS16X_END, 1477 GPS16X_MESSAGE, 1478 GPS16X_DATA, 1479 GPS16X_ROOTDELAY, 1480 GPS16X_BASEDELAY, 1481 GPS16X_ID, 1482 GPS16X_DESCRIPTION, 1483 GPS16X_FORMAT, 1484 GPS_TYPE, 1485 GPS16X_MAXUNSYNC, 1486 GPS16X_SPEED, 1487 GPS16X_CFLAG, 1488 GPS16X_IFLAG, 1489 GPS16X_OFLAG, 1490 GPS16X_LFLAG, 1491 GPS16X_SAMPLES, 1492 GPS16X_KEEP 1493 }, 1494 { /* mode 24 */ 1495 SEL240X_FLAGS, 1496 SEL240X_POLL, 1497 SEL240X_INIT, 1498 NO_EVENT, 1499 SEL240X_END, 1500 NO_MESSAGE, 1501 SEL240X_DATA, 1502 SEL240X_ROOTDELAY, 1503 SEL240X_BASEDELAY, 1504 SEL240X_ID, 1505 SEL240X_DESCRIPTION, 1506 SEL240X_FORMAT, 1507 GPS_TYPE, 1508 SEL240X_MAXUNSYNC, 1509 SEL240X_SPEED, 1510 SEL240X_CFLAG, 1511 SEL240X_IFLAG, 1512 SEL240X_OFLAG, 1513 SEL240X_LFLAG, 1514 SEL240X_SAMPLES, 1515 SEL240X_KEEP 1516 }, 1517 }; 1518 1519 static int ncltypes = sizeof(parse_clockinfo) / sizeof(struct parse_clockinfo); 1520 1521 #define CLK_REALTYPE(x) ((int)(((x)->ttl) & 0x7F)) 1522 #define CLK_TYPE(x) ((CLK_REALTYPE(x) >= ncltypes) ? ~0 : CLK_REALTYPE(x)) 1523 #define CLK_UNIT(x) ((int)REFCLOCKUNIT(&(x)->srcadr)) 1524 #define CLK_PPS(x) (((x)->ttl) & 0x80) 1525 1526 /* 1527 * Other constant stuff 1528 */ 1529 #define PARSEHSREFID 0x7f7f08ff /* 127.127.8.255 refid for hi strata */ 1530 1531 #define PARSESTATISTICS (60*60) /* output state statistics every hour */ 1532 1533 static int notice = 0; 1534 1535 #define PARSE_STATETIME(parse, i) ((parse->generic->currentstatus == i) ? parse->statetime[i] + current_time - parse->lastchange : parse->statetime[i]) 1536 1537 static void parse_event (struct parseunit *, int); 1538 static void parse_process (struct parseunit *, parsetime_t *); 1539 static void clear_err (struct parseunit *, u_long); 1540 static int list_err (struct parseunit *, u_long); 1541 static char * l_mktime (u_long); 1542 1543 /**=========================================================================== 1544 ** implementation error message regression module 1545 **/ 1546 static void 1547 clear_err( 1548 struct parseunit *parse, 1549 u_long lstate 1550 ) 1551 { 1552 if (lstate == ERR_ALL) 1553 { 1554 size_t i; 1555 1556 for (i = 0; i < ERR_CNT; i++) 1557 { 1558 parse->errors[i].err_stage = err_tbl[i]; 1559 parse->errors[i].err_cnt = 0; 1560 parse->errors[i].err_last = 0; 1561 parse->errors[i].err_started = 0; 1562 parse->errors[i].err_suppressed = 0; 1563 } 1564 } 1565 else 1566 { 1567 parse->errors[lstate].err_stage = err_tbl[lstate]; 1568 parse->errors[lstate].err_cnt = 0; 1569 parse->errors[lstate].err_last = 0; 1570 parse->errors[lstate].err_started = 0; 1571 parse->errors[lstate].err_suppressed = 0; 1572 } 1573 } 1574 1575 static int 1576 list_err( 1577 struct parseunit *parse, 1578 u_long lstate 1579 ) 1580 { 1581 int do_it; 1582 struct errorinfo *err = &parse->errors[lstate]; 1583 1584 if (err->err_started == 0) 1585 { 1586 err->err_started = current_time; 1587 } 1588 1589 do_it = (current_time - err->err_last) >= err->err_stage->err_delay; 1590 1591 if (do_it) 1592 err->err_cnt++; 1593 1594 if (err->err_stage->err_count && 1595 (err->err_cnt >= err->err_stage->err_count)) 1596 { 1597 err->err_stage++; 1598 err->err_cnt = 0; 1599 } 1600 1601 if (!err->err_cnt && do_it) 1602 msyslog(LOG_INFO, "PARSE receiver #%d: interval for following error message class is at least %s", 1603 CLK_UNIT(parse->peer), l_mktime(err->err_stage->err_delay)); 1604 1605 if (!do_it) 1606 err->err_suppressed++; 1607 else 1608 err->err_last = current_time; 1609 1610 if (do_it && err->err_suppressed) 1611 { 1612 msyslog(LOG_INFO, "PARSE receiver #%d: %ld message%s suppressed, error condition class persists for %s", 1613 CLK_UNIT(parse->peer), err->err_suppressed, (err->err_suppressed == 1) ? " was" : "s where", 1614 l_mktime(current_time - err->err_started)); 1615 err->err_suppressed = 0; 1616 } 1617 1618 return do_it; 1619 } 1620 1621 /*-------------------------------------------------- 1622 * mkreadable - make a printable ascii string (without 1623 * embedded quotes so that the ntpq protocol isn't 1624 * fooled 1625 */ 1626 #ifndef isprint 1627 #define isprint(_X_) (((_X_) > 0x1F) && ((_X_) < 0x7F)) 1628 #endif 1629 1630 static char * 1631 mkreadable( 1632 char *buffer, 1633 long blen, 1634 const char *src, 1635 u_long srclen, 1636 int hex 1637 ) 1638 { 1639 static const char ellipsis[] = "..."; 1640 char *b = buffer; 1641 char *endb = NULL; 1642 1643 if (blen < 4) 1644 return NULL; /* don't bother with mini buffers */ 1645 1646 endb = buffer + blen - sizeof(ellipsis); 1647 1648 blen--; /* account for '\0' */ 1649 1650 while (blen && srclen--) 1651 { 1652 if (!hex && /* no binary only */ 1653 (*src != '\\') && /* no plain \ */ 1654 (*src != '"') && /* no " */ 1655 isprint((unsigned char)*src)) /* only printables */ 1656 { /* they are easy... */ 1657 *buffer++ = *src++; 1658 blen--; 1659 } 1660 else 1661 { 1662 if (blen < 4) 1663 { 1664 while (blen--) 1665 { 1666 *buffer++ = '.'; 1667 } 1668 *buffer = '\0'; 1669 return b; 1670 } 1671 else 1672 { 1673 if (*src == '\\') 1674 { 1675 memcpy(buffer, "\\\\", 2); 1676 buffer += 2; 1677 blen -= 2; 1678 src++; 1679 } 1680 else 1681 { 1682 snprintf(buffer, blen, "\\x%02x", *src++); 1683 blen -= 4; 1684 buffer += 4; 1685 } 1686 } 1687 } 1688 if (srclen && !blen && endb) /* overflow - set last chars to ... */ 1689 memcpy(endb, ellipsis, sizeof(ellipsis)); 1690 } 1691 1692 *buffer = '\0'; 1693 return b; 1694 } 1695 1696 1697 /*-------------------------------------------------- 1698 * mkascii - make a printable ascii string 1699 * assumes (unless defined better) 7-bit ASCII 1700 */ 1701 static char * 1702 mkascii( 1703 char *buffer, 1704 long blen, 1705 const char *src, 1706 u_long srclen 1707 ) 1708 { 1709 return mkreadable(buffer, blen, src, srclen, 0); 1710 } 1711 1712 /**=========================================================================== 1713 ** implementation of i/o handling methods 1714 ** (all STREAM, partial STREAM, user level) 1715 **/ 1716 1717 /* 1718 * define possible io handling methods 1719 */ 1720 #ifdef STREAM 1721 static int ppsclock_init (struct parseunit *); 1722 static int stream_init (struct parseunit *); 1723 static void stream_end (struct parseunit *); 1724 static int stream_enable (struct parseunit *); 1725 static int stream_disable (struct parseunit *); 1726 static int stream_setcs (struct parseunit *, parsectl_t *); 1727 static int stream_getfmt (struct parseunit *, parsectl_t *); 1728 static int stream_setfmt (struct parseunit *, parsectl_t *); 1729 static int stream_timecode (struct parseunit *, parsectl_t *); 1730 static void stream_receive (struct recvbuf *); 1731 #endif 1732 1733 static int local_init (struct parseunit *); 1734 static void local_end (struct parseunit *); 1735 static int local_nop (struct parseunit *); 1736 static int local_setcs (struct parseunit *, parsectl_t *); 1737 static int local_getfmt (struct parseunit *, parsectl_t *); 1738 static int local_setfmt (struct parseunit *, parsectl_t *); 1739 static int local_timecode (struct parseunit *, parsectl_t *); 1740 static void local_receive (struct recvbuf *); 1741 static int local_input (struct recvbuf *); 1742 1743 static bind_t io_bindings[] = 1744 { 1745 #ifdef STREAM 1746 { 1747 "parse STREAM", 1748 stream_init, 1749 stream_end, 1750 stream_setcs, 1751 stream_disable, 1752 stream_enable, 1753 stream_getfmt, 1754 stream_setfmt, 1755 stream_timecode, 1756 stream_receive, 1757 0, 1758 }, 1759 { 1760 "ppsclock STREAM", 1761 ppsclock_init, 1762 local_end, 1763 local_setcs, 1764 local_nop, 1765 local_nop, 1766 local_getfmt, 1767 local_setfmt, 1768 local_timecode, 1769 local_receive, 1770 local_input, 1771 }, 1772 #endif 1773 { 1774 "normal", 1775 local_init, 1776 local_end, 1777 local_setcs, 1778 local_nop, 1779 local_nop, 1780 local_getfmt, 1781 local_setfmt, 1782 local_timecode, 1783 local_receive, 1784 local_input, 1785 }, 1786 { 1787 (char *)0, 1788 NULL, 1789 NULL, 1790 NULL, 1791 NULL, 1792 NULL, 1793 NULL, 1794 NULL, 1795 NULL, 1796 NULL, 1797 NULL, 1798 } 1799 }; 1800 1801 #ifdef STREAM 1802 1803 /*-------------------------------------------------- 1804 * ppsclock STREAM init 1805 */ 1806 static int 1807 ppsclock_init( 1808 struct parseunit *parse 1809 ) 1810 { 1811 static char m1[] = "ppsclocd"; 1812 static char m2[] = "ppsclock"; 1813 1814 /* 1815 * now push the parse streams module 1816 * it will ensure exclusive access to the device 1817 */ 1818 if (ioctl(parse->ppsfd, I_PUSH, (caddr_t)m1) == -1 && 1819 ioctl(parse->ppsfd, I_PUSH, (caddr_t)m2) == -1) 1820 { 1821 if (errno != EINVAL) 1822 { 1823 msyslog(LOG_ERR, "PARSE receiver #%d: ppsclock_init: ioctl(fd, I_PUSH, \"ppsclock\"): %m", 1824 CLK_UNIT(parse->peer)); 1825 } 1826 return 0; 1827 } 1828 if (!local_init(parse)) 1829 { 1830 (void)ioctl(parse->ppsfd, I_POP, (caddr_t)0); 1831 return 0; 1832 } 1833 1834 parse->flags |= PARSE_PPSCLOCK; 1835 return 1; 1836 } 1837 1838 /*-------------------------------------------------- 1839 * parse STREAM init 1840 */ 1841 static int 1842 stream_init( 1843 struct parseunit *parse 1844 ) 1845 { 1846 static char m1[] = "parse"; 1847 /* 1848 * now push the parse streams module 1849 * to test whether it is there (neat interface 8-( ) 1850 */ 1851 if (ioctl(parse->generic->io.fd, I_PUSH, (caddr_t)m1) == -1) 1852 { 1853 if (errno != EINVAL) /* accept non-existence */ 1854 { 1855 msyslog(LOG_ERR, "PARSE receiver #%d: stream_init: ioctl(fd, I_PUSH, \"parse\"): %m", CLK_UNIT(parse->peer)); 1856 } 1857 return 0; 1858 } 1859 else 1860 { 1861 while(ioctl(parse->generic->io.fd, I_POP, (caddr_t)0) == 0) 1862 /* empty loop */; 1863 1864 /* 1865 * now push it a second time after we have removed all 1866 * module garbage 1867 */ 1868 if (ioctl(parse->generic->io.fd, I_PUSH, (caddr_t)m1) == -1) 1869 { 1870 msyslog(LOG_ERR, "PARSE receiver #%d: stream_init: ioctl(fd, I_PUSH, \"parse\"): %m", CLK_UNIT(parse->peer)); 1871 return 0; 1872 } 1873 else 1874 { 1875 return 1; 1876 } 1877 } 1878 } 1879 1880 /*-------------------------------------------------- 1881 * parse STREAM end 1882 */ 1883 static void 1884 stream_end( 1885 struct parseunit *parse 1886 ) 1887 { 1888 while(ioctl(parse->generic->io.fd, I_POP, (caddr_t)0) == 0) 1889 /* empty loop */; 1890 } 1891 1892 /*-------------------------------------------------- 1893 * STREAM setcs 1894 */ 1895 static int 1896 stream_setcs( 1897 struct parseunit *parse, 1898 parsectl_t *tcl 1899 ) 1900 { 1901 struct strioctl strioc; 1902 1903 strioc.ic_cmd = PARSEIOC_SETCS; 1904 strioc.ic_timout = 0; 1905 strioc.ic_dp = (char *)tcl; 1906 strioc.ic_len = sizeof (*tcl); 1907 1908 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1909 { 1910 msyslog(LOG_ERR, "PARSE receiver #%d: stream_setcs: ioctl(fd, I_STR, PARSEIOC_SETCS): %m", CLK_UNIT(parse->peer)); 1911 return 0; 1912 } 1913 return 1; 1914 } 1915 1916 /*-------------------------------------------------- 1917 * STREAM enable 1918 */ 1919 static int 1920 stream_enable( 1921 struct parseunit *parse 1922 ) 1923 { 1924 struct strioctl strioc; 1925 1926 strioc.ic_cmd = PARSEIOC_ENABLE; 1927 strioc.ic_timout = 0; 1928 strioc.ic_dp = (char *)0; 1929 strioc.ic_len = 0; 1930 1931 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1932 { 1933 msyslog(LOG_ERR, "PARSE receiver #%d: stream_enable: ioctl(fd, I_STR, PARSEIOC_ENABLE): %m", CLK_UNIT(parse->peer)); 1934 return 0; 1935 } 1936 parse->generic->io.clock_recv = stream_receive; /* ok - parse input in kernel */ 1937 return 1; 1938 } 1939 1940 /*-------------------------------------------------- 1941 * STREAM disable 1942 */ 1943 static int 1944 stream_disable( 1945 struct parseunit *parse 1946 ) 1947 { 1948 struct strioctl strioc; 1949 1950 strioc.ic_cmd = PARSEIOC_DISABLE; 1951 strioc.ic_timout = 0; 1952 strioc.ic_dp = (char *)0; 1953 strioc.ic_len = 0; 1954 1955 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1956 { 1957 msyslog(LOG_ERR, "PARSE receiver #%d: stream_disable: ioctl(fd, I_STR, PARSEIOC_DISABLE): %m", CLK_UNIT(parse->peer)); 1958 return 0; 1959 } 1960 parse->generic->io.clock_recv = local_receive; /* ok - parse input in daemon */ 1961 return 1; 1962 } 1963 1964 /*-------------------------------------------------- 1965 * STREAM getfmt 1966 */ 1967 static int 1968 stream_getfmt( 1969 struct parseunit *parse, 1970 parsectl_t *tcl 1971 ) 1972 { 1973 struct strioctl strioc; 1974 1975 strioc.ic_cmd = PARSEIOC_GETFMT; 1976 strioc.ic_timout = 0; 1977 strioc.ic_dp = (char *)tcl; 1978 strioc.ic_len = sizeof (*tcl); 1979 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1980 { 1981 msyslog(LOG_ERR, "PARSE receiver #%d: ioctl(fd, I_STR, PARSEIOC_GETFMT): %m", CLK_UNIT(parse->peer)); 1982 return 0; 1983 } 1984 return 1; 1985 } 1986 1987 /*-------------------------------------------------- 1988 * STREAM setfmt 1989 */ 1990 static int 1991 stream_setfmt( 1992 struct parseunit *parse, 1993 parsectl_t *tcl 1994 ) 1995 { 1996 struct strioctl strioc; 1997 1998 strioc.ic_cmd = PARSEIOC_SETFMT; 1999 strioc.ic_timout = 0; 2000 strioc.ic_dp = (char *)tcl; 2001 strioc.ic_len = sizeof (*tcl); 2002 2003 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 2004 { 2005 msyslog(LOG_ERR, "PARSE receiver #%d: stream_setfmt: ioctl(fd, I_STR, PARSEIOC_SETFMT): %m", CLK_UNIT(parse->peer)); 2006 return 0; 2007 } 2008 return 1; 2009 } 2010 2011 2012 /*-------------------------------------------------- 2013 * STREAM timecode 2014 */ 2015 static int 2016 stream_timecode( 2017 struct parseunit *parse, 2018 parsectl_t *tcl 2019 ) 2020 { 2021 struct strioctl strioc; 2022 2023 strioc.ic_cmd = PARSEIOC_TIMECODE; 2024 strioc.ic_timout = 0; 2025 strioc.ic_dp = (char *)tcl; 2026 strioc.ic_len = sizeof (*tcl); 2027 2028 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 2029 { 2030 ERR(ERR_INTERNAL) 2031 msyslog(LOG_ERR, "PARSE receiver #%d: stream_timecode: ioctl(fd, I_STR, PARSEIOC_TIMECODE): %m", CLK_UNIT(parse->peer)); 2032 return 0; 2033 } 2034 clear_err(parse, ERR_INTERNAL); 2035 return 1; 2036 } 2037 2038 /*-------------------------------------------------- 2039 * STREAM receive 2040 */ 2041 static void 2042 stream_receive( 2043 struct recvbuf *rbufp 2044 ) 2045 { 2046 struct parseunit * parse; 2047 parsetime_t parsetime; 2048 2049 parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; 2050 if (!parse->peer) 2051 return; 2052 2053 if (rbufp->recv_length != sizeof(parsetime_t)) 2054 { 2055 ERR(ERR_BADIO) 2056 msyslog(LOG_ERR,"PARSE receiver #%d: stream_receive: bad size (got %d expected %d)", 2057 CLK_UNIT(parse->peer), rbufp->recv_length, (int)sizeof(parsetime_t)); 2058 parse_event(parse, CEVNT_BADREPLY); 2059 return; 2060 } 2061 clear_err(parse, ERR_BADIO); 2062 2063 memmove((caddr_t)&parsetime, 2064 (caddr_t)rbufp->recv_buffer, 2065 sizeof(parsetime_t)); 2066 2067 #ifdef DEBUG 2068 if (debug > 3) 2069 { 2070 printf("PARSE receiver #%d: status %06x, state %08x, time %lx.%08lx, stime %lx.%08lx, ptime %lx.%08lx\n", 2071 CLK_UNIT(parse->peer), 2072 (unsigned int)parsetime.parse_status, 2073 (unsigned int)parsetime.parse_state, 2074 (unsigned long)parsetime.parse_time.tv.tv_sec, 2075 (unsigned long)parsetime.parse_time.tv.tv_usec, 2076 (unsigned long)parsetime.parse_stime.tv.tv_sec, 2077 (unsigned long)parsetime.parse_stime.tv.tv_usec, 2078 (unsigned long)parsetime.parse_ptime.tv.tv_sec, 2079 (unsigned long)parsetime.parse_ptime.tv.tv_usec); 2080 } 2081 #endif 2082 2083 /* 2084 * switch time stamp world - be sure to normalize small usec field 2085 * errors. 2086 */ 2087 2088 parsetime.parse_stime.fp = tval_stamp_to_lfp(parsetime.parse_stime.tv); 2089 2090 if (PARSE_TIMECODE(parsetime.parse_state)) 2091 { 2092 parsetime.parse_time.fp = tval_stamp_to_lfp(parsetime.parse_time.tv); 2093 } 2094 2095 if (PARSE_PPS(parsetime.parse_state)) 2096 { 2097 parsetime.parse_ptime.fp = tval_stamp_to_lfp(parsetime.parse_ptime.tv); 2098 } 2099 2100 parse_process(parse, &parsetime); 2101 } 2102 #endif 2103 2104 /*-------------------------------------------------- 2105 * local init 2106 */ 2107 static int 2108 local_init( 2109 struct parseunit *parse 2110 ) 2111 { 2112 return parse_ioinit(&parse->parseio); 2113 } 2114 2115 /*-------------------------------------------------- 2116 * local end 2117 */ 2118 static void 2119 local_end( 2120 struct parseunit *parse 2121 ) 2122 { 2123 parse_ioend(&parse->parseio); 2124 } 2125 2126 2127 /*-------------------------------------------------- 2128 * local nop 2129 */ 2130 static int 2131 local_nop( 2132 struct parseunit *parse 2133 ) 2134 { 2135 return 1; 2136 } 2137 2138 /*-------------------------------------------------- 2139 * local setcs 2140 */ 2141 static int 2142 local_setcs( 2143 struct parseunit *parse, 2144 parsectl_t *tcl 2145 ) 2146 { 2147 return parse_setcs(tcl, &parse->parseio); 2148 } 2149 2150 /*-------------------------------------------------- 2151 * local getfmt 2152 */ 2153 static int 2154 local_getfmt( 2155 struct parseunit *parse, 2156 parsectl_t *tcl 2157 ) 2158 { 2159 return parse_getfmt(tcl, &parse->parseio); 2160 } 2161 2162 /*-------------------------------------------------- 2163 * local setfmt 2164 */ 2165 static int 2166 local_setfmt( 2167 struct parseunit *parse, 2168 parsectl_t *tcl 2169 ) 2170 { 2171 return parse_setfmt(tcl, &parse->parseio); 2172 } 2173 2174 /*-------------------------------------------------- 2175 * local timecode 2176 */ 2177 static int 2178 local_timecode( 2179 struct parseunit *parse, 2180 parsectl_t *tcl 2181 ) 2182 { 2183 return parse_timecode(tcl, &parse->parseio); 2184 } 2185 2186 2187 /*-------------------------------------------------- 2188 * local input 2189 */ 2190 static int 2191 local_input( 2192 struct recvbuf *rbufp 2193 ) 2194 { 2195 struct parseunit * parse; 2196 2197 int count; 2198 unsigned char *s; 2199 timestamp_t ts; 2200 2201 parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; 2202 if (!parse->peer) 2203 return 0; 2204 2205 /* 2206 * eat all characters, parsing then and feeding complete samples 2207 */ 2208 count = rbufp->recv_length; 2209 s = (unsigned char *)rbufp->recv_buffer; 2210 ts.fp = rbufp->recv_time; 2211 2212 while (count--) 2213 { 2214 if (parse_ioread(&parse->parseio, (unsigned int)(*s++), &ts)) 2215 { 2216 struct recvbuf *buf; 2217 2218 /* 2219 * got something good to eat 2220 */ 2221 if (!PARSE_PPS(parse->parseio.parse_dtime.parse_state)) 2222 { 2223 #ifdef HAVE_PPSAPI 2224 if (parse->flags & PARSE_PPSCLOCK) 2225 { 2226 struct timespec pps_timeout; 2227 pps_info_t pps_info; 2228 2229 pps_timeout.tv_sec = 0; 2230 pps_timeout.tv_nsec = 0; 2231 2232 if (time_pps_fetch(parse->atom.handle, PPS_TSFMT_TSPEC, &pps_info, 2233 &pps_timeout) == 0) 2234 { 2235 if (pps_info.assert_sequence + pps_info.clear_sequence != parse->ppsserial) 2236 { 2237 double dtemp; 2238 2239 struct timespec pts; 2240 /* 2241 * add PPS time stamp if available via ppsclock module 2242 * and not supplied already. 2243 */ 2244 if (parse->flags & PARSE_CLEAR) 2245 pts = pps_info.clear_timestamp; 2246 else 2247 pts = pps_info.assert_timestamp; 2248 2249 parse->parseio.parse_dtime.parse_ptime.fp.l_ui = (uint32_t) (pts.tv_sec + JAN_1970); 2250 2251 dtemp = (double) pts.tv_nsec / 1e9; 2252 if (dtemp < 0.) { 2253 dtemp += 1; 2254 parse->parseio.parse_dtime.parse_ptime.fp.l_ui--; 2255 } 2256 if (dtemp > 1.) { 2257 dtemp -= 1; 2258 parse->parseio.parse_dtime.parse_ptime.fp.l_ui++; 2259 } 2260 parse->parseio.parse_dtime.parse_ptime.fp.l_uf = (uint32_t)(dtemp * FRAC); 2261 2262 parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 2263 #ifdef DEBUG 2264 if (debug > 3) 2265 { 2266 printf( 2267 "parse: local_receive: fd %d PPSAPI seq %ld - PPS %s\n", 2268 rbufp->fd, 2269 (long)pps_info.assert_sequence + (long)pps_info.clear_sequence, 2270 lfptoa(&parse->parseio.parse_dtime.parse_ptime.fp, 6)); 2271 } 2272 #endif 2273 } 2274 #ifdef DEBUG 2275 else 2276 { 2277 if (debug > 3) 2278 { 2279 printf( 2280 "parse: local_receive: fd %d PPSAPI seq assert %ld, seq clear %ld - NO PPS event\n", 2281 rbufp->fd, 2282 (long)pps_info.assert_sequence, (long)pps_info.clear_sequence); 2283 } 2284 } 2285 #endif 2286 parse->ppsserial = pps_info.assert_sequence + pps_info.clear_sequence; 2287 } 2288 #ifdef DEBUG 2289 else 2290 { 2291 if (debug > 3) 2292 { 2293 printf( 2294 "parse: local_receive: fd %d PPSAPI time_pps_fetch errno = %d\n", 2295 rbufp->fd, 2296 errno); 2297 } 2298 } 2299 #endif 2300 } 2301 #else 2302 #ifdef TIOCDCDTIMESTAMP 2303 struct timeval dcd_time; 2304 2305 if (ioctl(parse->ppsfd, TIOCDCDTIMESTAMP, &dcd_time) != -1) 2306 { 2307 l_fp tstmp; 2308 2309 TVTOTS(&dcd_time, &tstmp); 2310 tstmp.l_ui += JAN_1970; 2311 L_SUB(&ts.fp, &tstmp); 2312 if (ts.fp.l_ui == 0) 2313 { 2314 #ifdef DEBUG 2315 if (debug) 2316 { 2317 printf( 2318 "parse: local_receive: fd %d DCDTIMESTAMP %s\n", 2319 parse->ppsfd, 2320 lfptoa(&tstmp, 6)); 2321 printf(" sigio %s\n", 2322 lfptoa(&ts.fp, 6)); 2323 } 2324 #endif 2325 parse->parseio.parse_dtime.parse_ptime.fp = tstmp; 2326 parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 2327 } 2328 } 2329 #else /* TIOCDCDTIMESTAMP */ 2330 #if defined(HAVE_STRUCT_PPSCLOCKEV) && (defined(HAVE_CIOGETEV) || defined(HAVE_TIOCGPPSEV)) 2331 if (parse->flags & PARSE_PPSCLOCK) 2332 { 2333 l_fp tts; 2334 struct ppsclockev ev; 2335 2336 #ifdef HAVE_CIOGETEV 2337 if (ioctl(parse->ppsfd, CIOGETEV, (caddr_t)&ev) == 0) 2338 #endif 2339 #ifdef HAVE_TIOCGPPSEV 2340 if (ioctl(parse->ppsfd, TIOCGPPSEV, (caddr_t)&ev) == 0) 2341 #endif 2342 { 2343 if (ev.serial != parse->ppsserial) 2344 { 2345 /* 2346 * add PPS time stamp if available via ppsclock module 2347 * and not supplied already. 2348 */ 2349 if (!buftvtots((const char *)&ev.tv, &tts)) 2350 { 2351 ERR(ERR_BADDATA) 2352 msyslog(LOG_ERR,"parse: local_receive: timestamp conversion error (buftvtots) (ppsclockev.tv)"); 2353 } 2354 else 2355 { 2356 parse->parseio.parse_dtime.parse_ptime.fp = tts; 2357 parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 2358 } 2359 } 2360 parse->ppsserial = ev.serial; 2361 } 2362 } 2363 #endif 2364 #endif /* TIOCDCDTIMESTAMP */ 2365 #endif /* !HAVE_PPSAPI */ 2366 } 2367 if (count) 2368 { /* simulate receive */ 2369 buf = get_free_recv_buffer(); 2370 if (buf != NULL) { 2371 memmove((caddr_t)buf->recv_buffer, 2372 (caddr_t)&parse->parseio.parse_dtime, 2373 sizeof(parsetime_t)); 2374 buf->recv_length = sizeof(parsetime_t); 2375 buf->recv_time = rbufp->recv_time; 2376 #ifndef HAVE_IO_COMPLETION_PORT 2377 buf->srcadr = rbufp->srcadr; 2378 #endif 2379 buf->dstadr = rbufp->dstadr; 2380 buf->receiver = rbufp->receiver; 2381 buf->fd = rbufp->fd; 2382 buf->X_from_where = rbufp->X_from_where; 2383 parse->generic->io.recvcount++; 2384 packets_received++; 2385 add_full_recv_buffer(buf); 2386 #ifdef HAVE_IO_COMPLETION_PORT 2387 SetEvent(WaitableIoEventHandle); 2388 #endif 2389 } 2390 parse_iodone(&parse->parseio); 2391 } 2392 else 2393 { 2394 memmove((caddr_t)rbufp->recv_buffer, 2395 (caddr_t)&parse->parseio.parse_dtime, 2396 sizeof(parsetime_t)); 2397 parse_iodone(&parse->parseio); 2398 rbufp->recv_length = sizeof(parsetime_t); 2399 return 1; /* got something & in place return */ 2400 } 2401 } 2402 } 2403 return 0; /* nothing to pass up */ 2404 } 2405 2406 /*-------------------------------------------------- 2407 * local receive 2408 */ 2409 static void 2410 local_receive( 2411 struct recvbuf *rbufp 2412 ) 2413 { 2414 struct parseunit * parse; 2415 parsetime_t parsetime; 2416 2417 parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; 2418 if (!parse->peer) 2419 return; 2420 2421 if (rbufp->recv_length != sizeof(parsetime_t)) 2422 { 2423 ERR(ERR_BADIO) 2424 msyslog(LOG_ERR,"PARSE receiver #%d: local_receive: bad size (got %d expected %d)", 2425 CLK_UNIT(parse->peer), rbufp->recv_length, (int)sizeof(parsetime_t)); 2426 parse_event(parse, CEVNT_BADREPLY); 2427 return; 2428 } 2429 clear_err(parse, ERR_BADIO); 2430 2431 memmove((caddr_t)&parsetime, 2432 (caddr_t)rbufp->recv_buffer, 2433 sizeof(parsetime_t)); 2434 2435 #ifdef DEBUG 2436 if (debug > 3) 2437 { 2438 printf("PARSE receiver #%d: status %06x, state %08x, time(fp) %lx.%08lx, stime(fp) %lx.%08lx, ptime(fp) %lx.%08lx\n", 2439 CLK_UNIT(parse->peer), 2440 (unsigned int)parsetime.parse_status, 2441 (unsigned int)parsetime.parse_state, 2442 (unsigned long)parsetime.parse_time.fp.l_ui, 2443 (unsigned long)parsetime.parse_time.fp.l_uf, 2444 (unsigned long)parsetime.parse_stime.fp.l_ui, 2445 (unsigned long)parsetime.parse_stime.fp.l_uf, 2446 (unsigned long)parsetime.parse_ptime.fp.l_ui, 2447 (unsigned long)parsetime.parse_ptime.fp.l_uf); 2448 } 2449 #endif 2450 2451 parse_process(parse, &parsetime); 2452 } 2453 2454 /*-------------------------------------------------- 2455 * init_iobinding - find and initialize lower layers 2456 */ 2457 static bind_t * 2458 init_iobinding( 2459 struct parseunit *parse 2460 ) 2461 { 2462 bind_t *b = io_bindings; 2463 2464 while (b->bd_description != (char *)0) 2465 { 2466 if ((*b->bd_init)(parse)) 2467 { 2468 return b; 2469 } 2470 b++; 2471 } 2472 return (bind_t *)0; 2473 } 2474 2475 /**=========================================================================== 2476 ** support routines 2477 **/ 2478 2479 static NTP_PRINTF(4, 5) char * 2480 ap(char *buffer, size_t len, char *pos, const char *fmt, ...) 2481 { 2482 va_list va; 2483 int l; 2484 size_t rem = len - (pos - buffer); 2485 2486 if (rem == 0) 2487 return pos; 2488 2489 va_start(va, fmt); 2490 l = vsnprintf(pos, rem, fmt, va); 2491 va_end(va); 2492 2493 if (l != -1) { 2494 rem--; 2495 if (rem >= (size_t)l) 2496 pos += l; 2497 else 2498 pos += rem; 2499 } 2500 2501 return pos; 2502 } 2503 2504 /*-------------------------------------------------- 2505 * convert a flag field to a string 2506 */ 2507 static char * 2508 parsestate( 2509 u_long lstate, 2510 char *buffer, 2511 int size 2512 ) 2513 { 2514 static struct bits 2515 { 2516 u_long bit; 2517 const char *name; 2518 } flagstrings[] = 2519 { 2520 { PARSEB_ANNOUNCE, "DST SWITCH WARNING" }, 2521 { PARSEB_POWERUP, "NOT SYNCHRONIZED" }, 2522 { PARSEB_NOSYNC, "TIME CODE NOT CONFIRMED" }, 2523 { PARSEB_DST, "DST" }, 2524 { PARSEB_UTC, "UTC DISPLAY" }, 2525 { PARSEB_LEAPADD, "LEAP ADD WARNING" }, 2526 { PARSEB_LEAPDEL, "LEAP DELETE WARNING" }, 2527 { PARSEB_LEAPSECOND, "LEAP SECOND" }, 2528 { PARSEB_CALLBIT, "CALL BIT" }, 2529 { PARSEB_TIMECODE, "TIME CODE" }, 2530 { PARSEB_PPS, "PPS" }, 2531 { PARSEB_POSITION, "POSITION" }, 2532 { 0, NULL } 2533 }; 2534 2535 static struct sbits 2536 { 2537 u_long bit; 2538 const char *name; 2539 } sflagstrings[] = 2540 { 2541 { PARSEB_S_LEAP, "LEAP INDICATION" }, 2542 { PARSEB_S_PPS, "PPS SIGNAL" }, 2543 { PARSEB_S_ANTENNA, "ANTENNA" }, 2544 { PARSEB_S_POSITION, "POSITION" }, 2545 { 0, NULL } 2546 }; 2547 int i; 2548 char *s, *t; 2549 2550 *buffer = '\0'; 2551 s = t = buffer; 2552 2553 i = 0; 2554 while (flagstrings[i].bit) 2555 { 2556 if (flagstrings[i].bit & lstate) 2557 { 2558 if (s != t) 2559 t = ap(buffer, size, t, "; "); 2560 t = ap(buffer, size, t, "%s", flagstrings[i].name); 2561 } 2562 i++; 2563 } 2564 2565 if (lstate & (PARSEB_S_LEAP|PARSEB_S_ANTENNA|PARSEB_S_PPS|PARSEB_S_POSITION)) 2566 { 2567 if (s != t) 2568 t = ap(buffer, size, t, "; "); 2569 2570 t = ap(buffer, size, t, "("); 2571 2572 s = t; 2573 2574 i = 0; 2575 while (sflagstrings[i].bit) 2576 { 2577 if (sflagstrings[i].bit & lstate) 2578 { 2579 if (t != s) 2580 { 2581 t = ap(buffer, size, t, "; "); 2582 } 2583 2584 t = ap(buffer, size, t, "%s", 2585 sflagstrings[i].name); 2586 } 2587 i++; 2588 } 2589 t = ap(buffer, size, t, ")"); 2590 } 2591 return buffer; 2592 } 2593 2594 /*-------------------------------------------------- 2595 * convert a status flag field to a string 2596 */ 2597 static char * 2598 parsestatus( 2599 u_long lstate, 2600 char *buffer, 2601 int size 2602 ) 2603 { 2604 static struct bits 2605 { 2606 u_long bit; 2607 const char *name; 2608 } flagstrings[] = 2609 { 2610 { CVT_OK, "CONVERSION SUCCESSFUL" }, 2611 { CVT_NONE, "NO CONVERSION" }, 2612 { CVT_FAIL, "CONVERSION FAILED" }, 2613 { CVT_BADFMT, "ILLEGAL FORMAT" }, 2614 { CVT_BADDATE, "DATE ILLEGAL" }, 2615 { CVT_BADTIME, "TIME ILLEGAL" }, 2616 { CVT_ADDITIONAL, "ADDITIONAL DATA" }, 2617 { 0, NULL } 2618 }; 2619 int i; 2620 char *t; 2621 2622 t = buffer; 2623 *buffer = '\0'; 2624 2625 i = 0; 2626 while (flagstrings[i].bit) 2627 { 2628 if (flagstrings[i].bit & lstate) 2629 { 2630 if (t != buffer) 2631 t = ap(buffer, size, t, "; "); 2632 t = ap(buffer, size, t, "%s", flagstrings[i].name); 2633 } 2634 i++; 2635 } 2636 2637 return buffer; 2638 } 2639 2640 /*-------------------------------------------------- 2641 * convert a clock status flag field to a string 2642 */ 2643 static const char * 2644 clockstatus( 2645 u_long lstate 2646 ) 2647 { 2648 static char buffer[20]; 2649 static struct status 2650 { 2651 u_long value; 2652 const char *name; 2653 } flagstrings[] = 2654 { 2655 { CEVNT_NOMINAL, "NOMINAL" }, 2656 { CEVNT_TIMEOUT, "NO RESPONSE" }, 2657 { CEVNT_BADREPLY,"BAD FORMAT" }, 2658 { CEVNT_FAULT, "FAULT" }, 2659 { CEVNT_PROP, "PROPAGATION DELAY" }, 2660 { CEVNT_BADDATE, "ILLEGAL DATE" }, 2661 { CEVNT_BADTIME, "ILLEGAL TIME" }, 2662 { (unsigned)~0L, NULL } 2663 }; 2664 int i; 2665 2666 i = 0; 2667 while (flagstrings[i].value != (u_int)~0) 2668 { 2669 if (flagstrings[i].value == lstate) 2670 { 2671 return flagstrings[i].name; 2672 } 2673 i++; 2674 } 2675 2676 snprintf(buffer, sizeof(buffer), "unknown #%ld", (u_long)lstate); 2677 2678 return buffer; 2679 } 2680 2681 2682 /*-------------------------------------------------- 2683 * l_mktime - make representation of a relative time 2684 */ 2685 static char * 2686 l_mktime( 2687 u_long delta 2688 ) 2689 { 2690 u_long tmp, m, s; 2691 static char buffer[40]; 2692 char *t; 2693 2694 buffer[0] = '\0'; 2695 t = buffer; 2696 2697 if ((tmp = delta / (60*60*24)) != 0) 2698 { 2699 t = ap(buffer, sizeof(buffer), t, "%ldd+", (u_long)tmp); 2700 delta -= tmp * 60*60*24; 2701 } 2702 2703 s = delta % 60; 2704 delta /= 60; 2705 m = delta % 60; 2706 delta /= 60; 2707 2708 t = ap(buffer, sizeof(buffer), t, "%02d:%02d:%02d", 2709 (int)delta, (int)m, (int)s); 2710 2711 return buffer; 2712 } 2713 2714 2715 /*-------------------------------------------------- 2716 * parse_statistics - list summary of clock states 2717 */ 2718 static void 2719 parse_statistics( 2720 struct parseunit *parse 2721 ) 2722 { 2723 int i; 2724 2725 NLOG(NLOG_CLOCKSTATIST) /* conditional if clause for conditional syslog */ 2726 { 2727 msyslog(LOG_INFO, "PARSE receiver #%d: running time: %s", 2728 CLK_UNIT(parse->peer), 2729 l_mktime(current_time - parse->generic->timestarted)); 2730 2731 msyslog(LOG_INFO, "PARSE receiver #%d: current status: %s", 2732 CLK_UNIT(parse->peer), 2733 clockstatus(parse->generic->currentstatus)); 2734 2735 for (i = 0; i <= CEVNT_MAX; i++) 2736 { 2737 u_long s_time; 2738 u_long percent, d = current_time - parse->generic->timestarted; 2739 2740 percent = s_time = PARSE_STATETIME(parse, i); 2741 2742 while (((u_long)(~0) / 10000) < percent) 2743 { 2744 percent /= 10; 2745 d /= 10; 2746 } 2747 2748 if (d) 2749 percent = (percent * 10000) / d; 2750 else 2751 percent = 10000; 2752 2753 if (s_time) 2754 msyslog(LOG_INFO, "PARSE receiver #%d: state %18s: %13s (%3ld.%02ld%%)", 2755 CLK_UNIT(parse->peer), 2756 clockstatus((unsigned int)i), 2757 l_mktime(s_time), 2758 percent / 100, percent % 100); 2759 } 2760 } 2761 } 2762 2763 /*-------------------------------------------------- 2764 * cparse_statistics - wrapper for statistics call 2765 */ 2766 static void 2767 cparse_statistics( 2768 struct parseunit *parse 2769 ) 2770 { 2771 if (parse->laststatistic + PARSESTATISTICS < current_time) 2772 parse_statistics(parse); 2773 parse->laststatistic = current_time; 2774 } 2775 2776 /**=========================================================================== 2777 ** ntp interface routines 2778 **/ 2779 2780 /*-------------------------------------------------- 2781 * parse_shutdown - shut down a PARSE clock 2782 */ 2783 static void 2784 parse_shutdown( 2785 int unit, 2786 struct peer *peer 2787 ) 2788 { 2789 struct parseunit *parse = NULL; 2790 2791 if (peer && peer->procptr) 2792 parse = peer->procptr->unitptr; 2793 2794 if (!parse) 2795 { 2796 /* nothing to clean up */ 2797 return; 2798 } 2799 2800 if (!parse->peer) 2801 { 2802 msyslog(LOG_INFO, "PARSE receiver #%d: INTERNAL ERROR - unit already inactive - shutdown ignored", unit); 2803 return; 2804 } 2805 2806 #ifdef HAVE_PPSAPI 2807 if (parse->flags & PARSE_PPSCLOCK) 2808 { 2809 (void)time_pps_destroy(parse->atom.handle); 2810 } 2811 #endif 2812 if (parse->generic->io.fd != parse->ppsfd && parse->ppsfd != -1) 2813 (void)closeserial(parse->ppsfd); /* close separate PPS source */ 2814 2815 /* 2816 * print statistics a last time and 2817 * stop statistics machine 2818 */ 2819 parse_statistics(parse); 2820 2821 if (parse->parse_type->cl_end) 2822 { 2823 parse->parse_type->cl_end(parse); 2824 } 2825 2826 /* 2827 * cleanup before leaving this world 2828 */ 2829 if (parse->binding) 2830 PARSE_END(parse); 2831 2832 /* 2833 * Tell the I/O module to turn us off. We're history. 2834 */ 2835 io_closeclock(&parse->generic->io); 2836 2837 free_varlist(parse->kv); 2838 2839 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 2840 msyslog(LOG_INFO, "PARSE receiver #%d: reference clock \"%s\" removed", 2841 CLK_UNIT(parse->peer), parse->parse_type->cl_description); 2842 2843 parse->peer = (struct peer *)0; /* unused now */ 2844 peer->procptr->unitptr = (caddr_t)0; 2845 free(parse); 2846 } 2847 2848 #ifdef HAVE_PPSAPI 2849 /*---------------------------------------- 2850 * set up HARDPPS via PPSAPI 2851 */ 2852 static void 2853 parse_hardpps( 2854 struct parseunit *parse, 2855 int mode 2856 ) 2857 { 2858 if (parse->hardppsstate == mode) 2859 return; 2860 2861 if (CLK_PPS(parse->peer) && (parse->flags & PARSE_PPSKERNEL)) { 2862 int i = 0; 2863 2864 if (mode == PARSE_HARDPPS_ENABLE) 2865 { 2866 if (parse->flags & PARSE_CLEAR) 2867 i = PPS_CAPTURECLEAR; 2868 else 2869 i = PPS_CAPTUREASSERT; 2870 } 2871 2872 if (time_pps_kcbind(parse->atom.handle, PPS_KC_HARDPPS, i, 2873 PPS_TSFMT_TSPEC) < 0) { 2874 msyslog(LOG_ERR, "PARSE receiver #%d: time_pps_kcbind failed: %m", 2875 CLK_UNIT(parse->peer)); 2876 } else { 2877 NLOG(NLOG_CLOCKINFO) 2878 msyslog(LOG_INFO, "PARSE receiver #%d: kernel PPS synchronisation %sabled", 2879 CLK_UNIT(parse->peer), (mode == PARSE_HARDPPS_ENABLE) ? "en" : "dis"); 2880 /* 2881 * tell the rest, that we have a kernel PPS source, iff we ever enable HARDPPS 2882 */ 2883 if (mode == PARSE_HARDPPS_ENABLE) 2884 hardpps_enable = 1; 2885 } 2886 } 2887 2888 parse->hardppsstate = mode; 2889 } 2890 2891 /*---------------------------------------- 2892 * set up PPS via PPSAPI 2893 */ 2894 static int 2895 parse_ppsapi( 2896 struct parseunit *parse 2897 ) 2898 { 2899 int cap, mode_ppsoffset; 2900 const char *cp; 2901 2902 parse->flags &= (u_char) (~PARSE_PPSCLOCK); 2903 2904 /* 2905 * collect PPSAPI offset capability - should move into generic handling 2906 */ 2907 if (time_pps_getcap(parse->atom.handle, &cap) < 0) { 2908 msyslog(LOG_ERR, "PARSE receiver #%d: parse_ppsapi: time_pps_getcap failed: %m", 2909 CLK_UNIT(parse->peer)); 2910 2911 return 0; 2912 } 2913 2914 /* 2915 * initialize generic PPSAPI interface 2916 * 2917 * we leave out CLK_FLAG3 as time_pps_kcbind() 2918 * is handled here for now. Ideally this should also 2919 * be part of the generic PPSAPI interface 2920 */ 2921 if (!refclock_params(parse->flags & (CLK_FLAG1|CLK_FLAG2|CLK_FLAG4), &parse->atom)) 2922 return 0; 2923 2924 /* nb. only turn things on, if someone else has turned something 2925 * on before we get here, leave it alone! 2926 */ 2927 2928 if (parse->flags & PARSE_CLEAR) { 2929 cp = "CLEAR"; 2930 mode_ppsoffset = PPS_OFFSETCLEAR; 2931 } else { 2932 cp = "ASSERT"; 2933 mode_ppsoffset = PPS_OFFSETASSERT; 2934 } 2935 2936 msyslog(LOG_INFO, "PARSE receiver #%d: initializing PPS to %s", 2937 CLK_UNIT(parse->peer), cp); 2938 2939 if (!(mode_ppsoffset & cap)) { 2940 msyslog(LOG_WARNING, "PARSE receiver #%d: Cannot set PPS_%sCLEAR, this will increase jitter (PPS API capabilities=0x%x)", 2941 CLK_UNIT(parse->peer), cp, cap); 2942 mode_ppsoffset = 0; 2943 } else { 2944 if (mode_ppsoffset == PPS_OFFSETCLEAR) 2945 { 2946 parse->atom.pps_params.clear_offset.tv_sec = (time_t)(-parse->ppsphaseadjust); 2947 parse->atom.pps_params.clear_offset.tv_nsec = (long)(-1e9*(parse->ppsphaseadjust - (double)(long)parse->ppsphaseadjust)); 2948 } 2949 2950 if (mode_ppsoffset == PPS_OFFSETASSERT) 2951 { 2952 parse->atom.pps_params.assert_offset.tv_sec = (time_t)(-parse->ppsphaseadjust); 2953 parse->atom.pps_params.assert_offset.tv_nsec = (long)(-1e9*(parse->ppsphaseadjust - (double)(long)parse->ppsphaseadjust)); 2954 } 2955 } 2956 2957 parse->atom.pps_params.mode |= mode_ppsoffset; 2958 2959 if (time_pps_setparams(parse->atom.handle, &parse->atom.pps_params) < 0) { 2960 msyslog(LOG_ERR, "PARSE receiver #%d: FAILED set PPS parameters: %m", 2961 CLK_UNIT(parse->peer)); 2962 return 0; 2963 } 2964 2965 parse->flags |= PARSE_PPSCLOCK; 2966 return 1; 2967 } 2968 #else 2969 #define parse_hardpps(_PARSE_, _MODE_) /* empty */ 2970 #endif 2971 2972 /*-------------------------------------------------- 2973 * parse_start - open the PARSE devices and initialize data for processing 2974 */ 2975 static int 2976 parse_start( 2977 int sysunit, 2978 struct peer *peer 2979 ) 2980 { 2981 u_int unit; 2982 int fd232; 2983 #ifdef HAVE_TERMIOS 2984 struct termios tio; /* NEEDED FOR A LONG TIME ! */ 2985 #endif 2986 #ifdef HAVE_SYSV_TTYS 2987 struct termio tio; /* NEEDED FOR A LONG TIME ! */ 2988 #endif 2989 struct parseunit * parse; 2990 char parsedev[sizeof(PARSEDEVICE)+20]; 2991 char parseppsdev[sizeof(PARSEPPSDEVICE)+20]; 2992 parsectl_t tmp_ctl; 2993 u_int type; 2994 2995 /* 2996 * get out Copyright information once 2997 */ 2998 if (!notice) 2999 { 3000 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3001 msyslog(LOG_INFO, "NTP PARSE support: Copyright (c) 1989-2009, Frank Kardel"); 3002 notice = 1; 3003 } 3004 3005 type = CLK_TYPE(peer); 3006 unit = CLK_UNIT(peer); 3007 3008 if ((type == (u_int)~0) || (parse_clockinfo[type].cl_description == (char *)0)) 3009 { 3010 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: unsupported clock type %d (max %d)", 3011 unit, CLK_REALTYPE(peer), ncltypes-1); 3012 return 0; 3013 } 3014 3015 /* 3016 * Unit okay, attempt to open the device. 3017 */ 3018 (void) snprintf(parsedev, sizeof(parsedev), PARSEDEVICE, unit); 3019 (void) snprintf(parseppsdev, sizeof(parsedev), PARSEPPSDEVICE, unit); 3020 3021 #ifndef O_NOCTTY 3022 #define O_NOCTTY 0 3023 #endif 3024 #ifndef O_NONBLOCK 3025 #define O_NONBLOCK 0 3026 #endif 3027 3028 fd232 = tty_open(parsedev, O_RDWR | O_NOCTTY | O_NONBLOCK, 0777); 3029 3030 if (fd232 == -1) 3031 { 3032 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: open of %s failed: %m", unit, parsedev); 3033 return 0; 3034 } 3035 3036 parse = emalloc_zero(sizeof(*parse)); 3037 3038 parse->generic = peer->procptr; /* link up */ 3039 parse->generic->unitptr = (caddr_t)parse; /* link down */ 3040 3041 /* 3042 * Set up the structures 3043 */ 3044 parse->generic->timestarted = current_time; 3045 parse->lastchange = current_time; 3046 3047 parse->flags = 0; 3048 parse->pollneeddata = 0; 3049 parse->laststatistic = current_time; 3050 parse->lastformat = (unsigned short)~0; /* assume no format known */ 3051 parse->timedata.parse_status = (unsigned short)~0; /* be sure to mark initial status change */ 3052 parse->lastmissed = 0; /* assume got everything */ 3053 parse->ppsserial = 0; 3054 parse->ppsfd = -1; 3055 parse->localdata = (void *)0; 3056 parse->localstate = 0; 3057 parse->kv = (struct ctl_var *)0; 3058 3059 clear_err(parse, ERR_ALL); 3060 3061 parse->parse_type = &parse_clockinfo[type]; 3062 3063 parse->maxunsync = parse->parse_type->cl_maxunsync; 3064 3065 parse->generic->fudgetime1 = parse->parse_type->cl_basedelay; 3066 3067 parse->generic->fudgetime2 = 0.0; 3068 parse->ppsphaseadjust = parse->generic->fudgetime2; 3069 3070 parse->generic->clockdesc = parse->parse_type->cl_description; 3071 3072 peer->rootdelay = parse->parse_type->cl_rootdelay; 3073 peer->sstclktype = parse->parse_type->cl_type; 3074 peer->precision = sys_precision; 3075 3076 peer->stratum = STRATUM_REFCLOCK; 3077 3078 if (peer->stratum <= 1) 3079 memmove((char *)&parse->generic->refid, parse->parse_type->cl_id, 4); 3080 else 3081 parse->generic->refid = htonl(PARSEHSREFID); 3082 3083 parse->generic->io.fd = fd232; 3084 3085 parse->peer = peer; /* marks it also as busy */ 3086 3087 /* 3088 * configure terminal line 3089 */ 3090 if (TTY_GETATTR(fd232, &tio) == -1) 3091 { 3092 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcgetattr(%d, &tio): %m", unit, fd232); 3093 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3094 return 0; 3095 } 3096 else 3097 { 3098 #ifndef _PC_VDISABLE 3099 memset((char *)tio.c_cc, 0, sizeof(tio.c_cc)); 3100 #else 3101 int disablec; 3102 errno = 0; /* pathconf can deliver -1 without changing errno ! */ 3103 3104 disablec = fpathconf(parse->generic->io.fd, _PC_VDISABLE); 3105 if (disablec == -1 && errno) 3106 { 3107 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: fpathconf(fd, _PC_VDISABLE): %m", CLK_UNIT(parse->peer)); 3108 memset((char *)tio.c_cc, 0, sizeof(tio.c_cc)); /* best guess */ 3109 } 3110 else 3111 if (disablec != -1) 3112 memset((char *)tio.c_cc, disablec, sizeof(tio.c_cc)); 3113 #endif 3114 3115 #if defined (VMIN) || defined(VTIME) 3116 if ((parse_clockinfo[type].cl_lflag & ICANON) == 0) 3117 { 3118 #ifdef VMIN 3119 tio.c_cc[VMIN] = 1; 3120 #endif 3121 #ifdef VTIME 3122 tio.c_cc[VTIME] = 0; 3123 #endif 3124 } 3125 #endif 3126 3127 tio.c_cflag = (tcflag_t) parse_clockinfo[type].cl_cflag; 3128 tio.c_iflag = (tcflag_t) parse_clockinfo[type].cl_iflag; 3129 tio.c_oflag = (tcflag_t) parse_clockinfo[type].cl_oflag; 3130 tio.c_lflag = (tcflag_t) parse_clockinfo[type].cl_lflag; 3131 3132 3133 #ifdef HAVE_TERMIOS 3134 if ((cfsetospeed(&tio, (speed_t) parse_clockinfo[type].cl_speed) == -1) || 3135 (cfsetispeed(&tio, (speed_t) parse_clockinfo[type].cl_speed) == -1)) 3136 { 3137 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcset{i,o}speed(&tio, speed): %m", unit); 3138 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3139 return 0; 3140 } 3141 #else 3142 tio.c_cflag |= parse_clockinfo[type].cl_speed; 3143 #endif 3144 3145 /* 3146 * set up pps device 3147 * if the PARSEPPSDEVICE can be opened that will be used 3148 * for PPS else PARSEDEVICE will be used 3149 */ 3150 parse->ppsfd = tty_open(parseppsdev, O_RDWR | O_NOCTTY | O_NONBLOCK, 0777); 3151 3152 if (parse->ppsfd == -1) 3153 { 3154 parse->ppsfd = fd232; 3155 } 3156 3157 /* 3158 * Linux PPS - the old way 3159 */ 3160 #if defined(HAVE_TIO_SERIAL_STUFF) /* Linux hack: define PPS interface */ 3161 { 3162 struct serial_struct ss; 3163 if (ioctl(parse->ppsfd, TIOCGSERIAL, &ss) < 0 || 3164 ( 3165 #ifdef ASYNC_LOW_LATENCY 3166 ss.flags |= ASYNC_LOW_LATENCY, 3167 #endif 3168 #ifndef HAVE_PPSAPI 3169 #ifdef ASYNC_PPS_CD_NEG 3170 ss.flags |= ASYNC_PPS_CD_NEG, 3171 #endif 3172 #endif 3173 ioctl(parse->ppsfd, TIOCSSERIAL, &ss)) < 0) { 3174 msyslog(LOG_NOTICE, "refclock_parse: TIOCSSERIAL fd %d, %m", parse->ppsfd); 3175 msyslog(LOG_NOTICE, 3176 "refclock_parse: optional PPS processing not available"); 3177 } else { 3178 parse->flags |= PARSE_PPSCLOCK; 3179 #ifdef ASYNC_PPS_CD_NEG 3180 NLOG(NLOG_CLOCKINFO) 3181 msyslog(LOG_INFO, 3182 "refclock_parse: PPS detection on"); 3183 #endif 3184 } 3185 } 3186 #endif 3187 3188 /* 3189 * SUN the Solaris way 3190 */ 3191 #ifdef HAVE_TIOCSPPS /* SUN PPS support */ 3192 if (CLK_PPS(parse->peer)) 3193 { 3194 int i = 1; 3195 3196 if (ioctl(parse->ppsfd, TIOCSPPS, (caddr_t)&i) == 0) 3197 { 3198 parse->flags |= PARSE_PPSCLOCK; 3199 } 3200 } 3201 #endif 3202 3203 /* 3204 * PPS via PPSAPI 3205 */ 3206 #if defined(HAVE_PPSAPI) 3207 parse->hardppsstate = PARSE_HARDPPS_DISABLE; 3208 if (CLK_PPS(parse->peer)) 3209 { 3210 if (!refclock_ppsapi(parse->ppsfd, &parse->atom)) 3211 { 3212 msyslog(LOG_NOTICE, "PARSE receiver #%d: parse_start: could not set up PPS: %m", CLK_UNIT(parse->peer)); 3213 } 3214 else 3215 { 3216 parse_ppsapi(parse); 3217 } 3218 } 3219 #endif 3220 3221 if (TTY_SETATTR(fd232, &tio) == -1) 3222 { 3223 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcsetattr(%d, &tio): %m", unit, fd232); 3224 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3225 return 0; 3226 } 3227 } 3228 3229 /* 3230 * pick correct input machine 3231 */ 3232 parse->generic->io.srcclock = peer; 3233 parse->generic->io.datalen = 0; 3234 3235 parse->binding = init_iobinding(parse); 3236 3237 if (parse->binding == (bind_t *)0) 3238 { 3239 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: io sub system initialisation failed.", CLK_UNIT(parse->peer)); 3240 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3241 return 0; /* well, ok - special initialisation broke */ 3242 } 3243 3244 parse->generic->io.clock_recv = parse->binding->bd_receive; /* pick correct receive routine */ 3245 parse->generic->io.io_input = parse->binding->bd_io_input; /* pick correct input routine */ 3246 3247 /* 3248 * as we always(?) get 8 bit chars we want to be 3249 * sure, that the upper bits are zero for less 3250 * than 8 bit I/O - so we pass that information on. 3251 * note that there can be only one bit count format 3252 * per file descriptor 3253 */ 3254 3255 switch (tio.c_cflag & CSIZE) 3256 { 3257 case CS5: 3258 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS5; 3259 break; 3260 3261 case CS6: 3262 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS6; 3263 break; 3264 3265 case CS7: 3266 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS7; 3267 break; 3268 3269 case CS8: 3270 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS8; 3271 break; 3272 } 3273 3274 if (!PARSE_SETCS(parse, &tmp_ctl)) 3275 { 3276 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: parse_setcs() FAILED.", unit); 3277 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3278 return 0; /* well, ok - special initialisation broke */ 3279 } 3280 3281 strlcpy(tmp_ctl.parseformat.parse_buffer, parse->parse_type->cl_format, sizeof(tmp_ctl.parseformat.parse_buffer)); 3282 tmp_ctl.parseformat.parse_count = (u_short) strlen(tmp_ctl.parseformat.parse_buffer); 3283 3284 if (!PARSE_SETFMT(parse, &tmp_ctl)) 3285 { 3286 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: parse_setfmt() FAILED.", unit); 3287 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3288 return 0; /* well, ok - special initialisation broke */ 3289 } 3290 3291 /* 3292 * get rid of all IO accumulated so far 3293 */ 3294 #ifdef HAVE_TERMIOS 3295 (void) tcflush(parse->generic->io.fd, TCIOFLUSH); 3296 #else 3297 #if defined(TCFLSH) && defined(TCIOFLUSH) 3298 { 3299 int flshcmd = TCIOFLUSH; 3300 3301 (void) ioctl(parse->generic->io.fd, TCFLSH, (caddr_t)&flshcmd); 3302 } 3303 #endif 3304 #endif 3305 3306 /* 3307 * try to do any special initializations 3308 */ 3309 if (parse->parse_type->cl_init) 3310 { 3311 if (parse->parse_type->cl_init(parse)) 3312 { 3313 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3314 return 0; /* well, ok - special initialisation broke */ 3315 } 3316 } 3317 3318 /* 3319 * Insert in async io device list. 3320 */ 3321 if (!io_addclock(&parse->generic->io)) 3322 { 3323 msyslog(LOG_ERR, 3324 "PARSE receiver #%d: parse_start: addclock %s fails (ABORT - clock type requires async io)", CLK_UNIT(parse->peer), parsedev); 3325 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3326 return 0; 3327 } 3328 3329 /* 3330 * print out configuration 3331 */ 3332 NLOG(NLOG_CLOCKINFO) 3333 { 3334 /* conditional if clause for conditional syslog */ 3335 msyslog(LOG_INFO, "PARSE receiver #%d: reference clock \"%s\" (I/O device %s, PPS device %s) added", 3336 CLK_UNIT(parse->peer), 3337 parse->parse_type->cl_description, parsedev, 3338 (parse->ppsfd != parse->generic->io.fd) ? parseppsdev : parsedev); 3339 3340 msyslog(LOG_INFO, "PARSE receiver #%d: Stratum %d, trust time %s, precision %d", 3341 CLK_UNIT(parse->peer), 3342 parse->peer->stratum, 3343 l_mktime(parse->maxunsync), parse->peer->precision); 3344 3345 msyslog(LOG_INFO, "PARSE receiver #%d: rootdelay %.6f s, phase adjustment %.6f s, PPS phase adjustment %.6f s, %s IO handling", 3346 CLK_UNIT(parse->peer), 3347 parse->parse_type->cl_rootdelay, 3348 parse->generic->fudgetime1, 3349 parse->ppsphaseadjust, 3350 parse->binding->bd_description); 3351 3352 msyslog(LOG_INFO, "PARSE receiver #%d: Format recognition: %s", CLK_UNIT(parse->peer), 3353 parse->parse_type->cl_format); 3354 msyslog(LOG_INFO, "PARSE receiver #%d: %sPPS support%s", CLK_UNIT(parse->peer), 3355 CLK_PPS(parse->peer) ? "" : "NO ", 3356 CLK_PPS(parse->peer) ? 3357 #ifdef PPS_METHOD 3358 " (implementation " PPS_METHOD ")" 3359 #else 3360 "" 3361 #endif 3362 : "" 3363 ); 3364 } 3365 3366 return 1; 3367 } 3368 3369 /*-------------------------------------------------- 3370 * parse_ctl - process changes on flags/time values 3371 */ 3372 static void 3373 parse_ctl( 3374 struct parseunit *parse, 3375 const struct refclockstat *in 3376 ) 3377 { 3378 if (in) 3379 { 3380 if (in->haveflags & (CLK_HAVEFLAG1|CLK_HAVEFLAG2|CLK_HAVEFLAG3|CLK_HAVEFLAG4)) 3381 { 3382 u_char mask = CLK_FLAG1|CLK_FLAG2|CLK_FLAG3|CLK_FLAG4; 3383 parse->flags = (parse->flags & (u_char)(~mask)) | (in->flags & mask); 3384 #if defined(HAVE_PPSAPI) 3385 if (CLK_PPS(parse->peer)) 3386 { 3387 parse_ppsapi(parse); 3388 } 3389 #endif 3390 } 3391 3392 if (in->haveflags & CLK_HAVETIME1) 3393 { 3394 parse->generic->fudgetime1 = in->fudgetime1; 3395 msyslog(LOG_INFO, "PARSE receiver #%d: new phase adjustment %.6f s", 3396 CLK_UNIT(parse->peer), 3397 parse->generic->fudgetime1); 3398 } 3399 3400 if (in->haveflags & CLK_HAVETIME2) 3401 { 3402 parse->generic->fudgetime2 = in->fudgetime2; 3403 if (parse->flags & PARSE_TRUSTTIME) 3404 { 3405 parse->maxunsync = (u_long)ABS(in->fudgetime2); 3406 msyslog(LOG_INFO, "PARSE receiver #%d: new trust time %s", 3407 CLK_UNIT(parse->peer), 3408 l_mktime(parse->maxunsync)); 3409 } 3410 else 3411 { 3412 parse->ppsphaseadjust = in->fudgetime2; 3413 msyslog(LOG_INFO, "PARSE receiver #%d: new PPS phase adjustment %.6f s", 3414 CLK_UNIT(parse->peer), 3415 parse->ppsphaseadjust); 3416 #if defined(HAVE_PPSAPI) 3417 if (CLK_PPS(parse->peer)) 3418 { 3419 parse_ppsapi(parse); 3420 } 3421 #endif 3422 } 3423 } 3424 } 3425 } 3426 3427 /*-------------------------------------------------- 3428 * parse_poll - called by the transmit procedure 3429 */ 3430 static void 3431 parse_poll( 3432 int unit, 3433 struct peer *peer 3434 ) 3435 { 3436 struct parseunit *parse = peer->procptr->unitptr; 3437 3438 if (peer != parse->peer) 3439 { 3440 msyslog(LOG_ERR, 3441 "PARSE receiver #%d: poll: INTERNAL: peer incorrect", 3442 unit); 3443 return; 3444 } 3445 3446 /* 3447 * Update clock stat counters 3448 */ 3449 parse->generic->polls++; 3450 3451 if (parse->pollneeddata && 3452 ((int)(current_time - parse->pollneeddata) > (1<<(max(min(parse->peer->hpoll, parse->peer->ppoll), parse->peer->minpoll))))) 3453 { 3454 /* 3455 * start worrying when exceeding a poll inteval 3456 * bad news - didn't get a response last time 3457 */ 3458 parse->lastmissed = current_time; 3459 parse_event(parse, CEVNT_TIMEOUT); 3460 3461 ERR(ERR_NODATA) 3462 msyslog(LOG_WARNING, "PARSE receiver #%d: no data from device within poll interval (check receiver / wiring)", CLK_UNIT(parse->peer)); 3463 } 3464 3465 /* 3466 * we just mark that we want the next sample for the clock filter 3467 */ 3468 parse->pollneeddata = current_time; 3469 3470 if (parse->parse_type->cl_poll) 3471 { 3472 parse->parse_type->cl_poll(parse); 3473 } 3474 3475 cparse_statistics(parse); 3476 3477 return; 3478 } 3479 3480 #define LEN_STATES 300 /* length of state string */ 3481 3482 /*-------------------------------------------------- 3483 * parse_control - set fudge factors, return statistics 3484 */ 3485 static void 3486 parse_control( 3487 int unit, 3488 const struct refclockstat *in, 3489 struct refclockstat *out, 3490 struct peer *peer 3491 ) 3492 { 3493 struct parseunit *parse = peer->procptr->unitptr; 3494 parsectl_t tmpctl; 3495 3496 static char outstatus[400]; /* status output buffer */ 3497 3498 if (out) 3499 { 3500 out->lencode = 0; 3501 out->p_lastcode = 0; 3502 out->kv_list = (struct ctl_var *)0; 3503 } 3504 3505 if (!parse || !parse->peer) 3506 { 3507 msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: unit invalid (UNIT INACTIVE)", 3508 unit); 3509 return; 3510 } 3511 3512 unit = CLK_UNIT(parse->peer); 3513 3514 /* 3515 * handle changes 3516 */ 3517 parse_ctl(parse, in); 3518 3519 /* 3520 * supply data 3521 */ 3522 if (out) 3523 { 3524 u_long sum = 0; 3525 char *tt, *start; 3526 int i; 3527 3528 outstatus[0] = '\0'; 3529 3530 out->type = REFCLK_PARSE; 3531 3532 /* 3533 * keep fudgetime2 in sync with TRUSTTIME/MAXUNSYNC flag1 3534 */ 3535 parse->generic->fudgetime2 = (parse->flags & PARSE_TRUSTTIME) ? (double)parse->maxunsync : parse->ppsphaseadjust; 3536 3537 /* 3538 * figure out skew between PPS and RS232 - just for informational 3539 * purposes 3540 */ 3541 if (PARSE_SYNC(parse->timedata.parse_state)) 3542 { 3543 if (PARSE_PPS(parse->timedata.parse_state) && PARSE_TIMECODE(parse->timedata.parse_state)) 3544 { 3545 l_fp off; 3546 3547 /* 3548 * we have a PPS and RS232 signal - calculate the skew 3549 * WARNING: assumes on TIMECODE == PULSE (timecode after pulse) 3550 */ 3551 off = parse->timedata.parse_stime.fp; 3552 L_SUB(&off, &parse->timedata.parse_ptime.fp); /* true offset */ 3553 tt = add_var(&out->kv_list, 80, RO); 3554 snprintf(tt, 80, "refclock_ppsskew=%s", lfptoms(&off, 6)); 3555 } 3556 } 3557 3558 if (PARSE_PPS(parse->timedata.parse_state)) 3559 { 3560 tt = add_var(&out->kv_list, 80, RO|DEF); 3561 snprintf(tt, 80, "refclock_ppstime=\"%s\"", gmprettydate(&parse->timedata.parse_ptime.fp)); 3562 } 3563 3564 start = tt = add_var(&out->kv_list, 128, RO|DEF); 3565 tt = ap(start, 128, tt, "refclock_time=\""); 3566 3567 if (parse->timedata.parse_time.fp.l_ui == 0) 3568 { 3569 tt = ap(start, 128, tt, "<UNDEFINED>\""); 3570 } 3571 else 3572 { 3573 tt = ap(start, 128, tt, "%s\"", 3574 gmprettydate(&parse->timedata.parse_time.fp)); 3575 } 3576 3577 if (!PARSE_GETTIMECODE(parse, &tmpctl)) 3578 { 3579 ERR(ERR_INTERNAL) 3580 msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: parse_timecode() FAILED", unit); 3581 } 3582 else 3583 { 3584 start = tt = add_var(&out->kv_list, 512, RO|DEF); 3585 tt = ap(start, 512, tt, "refclock_status=\""); 3586 3587 /* 3588 * copy PPS flags from last read transaction (informational only) 3589 */ 3590 tmpctl.parsegettc.parse_state |= parse->timedata.parse_state & 3591 (PARSEB_PPS|PARSEB_S_PPS); 3592 3593 (void)parsestate(tmpctl.parsegettc.parse_state, tt, BUFFER_SIZES(start, tt, 512)); 3594 3595 tt += strlen(tt); 3596 3597 tt = ap(start, 512, tt, "\""); 3598 3599 if (tmpctl.parsegettc.parse_count) 3600 mkascii(outstatus+strlen(outstatus), (int)(sizeof(outstatus)- strlen(outstatus) - 1), 3601 tmpctl.parsegettc.parse_buffer, (unsigned)(tmpctl.parsegettc.parse_count)); 3602 3603 } 3604 3605 tmpctl.parseformat.parse_format = tmpctl.parsegettc.parse_format; 3606 3607 if (!PARSE_GETFMT(parse, &tmpctl)) 3608 { 3609 ERR(ERR_INTERNAL) 3610 msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: parse_getfmt() FAILED", unit); 3611 } 3612 else 3613 { 3614 int count = tmpctl.parseformat.parse_count - 1; 3615 3616 start = tt = add_var(&out->kv_list, 80, RO|DEF); 3617 tt = ap(start, 80, tt, "refclock_format=\""); 3618 3619 if (count > 0) { 3620 tt = ap(start, 80, tt, "%*.*s", 3621 count, 3622 count, 3623 tmpctl.parseformat.parse_buffer); 3624 } 3625 3626 tt = ap(start, 80, tt, "\""); 3627 } 3628 3629 /* 3630 * gather state statistics 3631 */ 3632 3633 start = tt = add_var(&out->kv_list, LEN_STATES, RO|DEF); 3634 tt = ap(start, LEN_STATES, tt, "refclock_states=\""); 3635 3636 for (i = 0; i <= CEVNT_MAX; i++) 3637 { 3638 u_long s_time; 3639 u_long d = current_time - parse->generic->timestarted; 3640 u_long percent; 3641 3642 percent = s_time = PARSE_STATETIME(parse, i); 3643 3644 while (((u_long)(~0) / 10000) < percent) 3645 { 3646 percent /= 10; 3647 d /= 10; 3648 } 3649 3650 if (d) 3651 percent = (percent * 10000) / d; 3652 else 3653 percent = 10000; 3654 3655 if (s_time) 3656 { 3657 char item[80]; 3658 int count; 3659 3660 snprintf(item, 80, "%s%s%s: %s (%d.%02d%%)", 3661 sum ? "; " : "", 3662 (parse->generic->currentstatus == i) ? "*" : "", 3663 clockstatus((unsigned int)i), 3664 l_mktime(s_time), 3665 (int)(percent / 100), (int)(percent % 100)); 3666 if ((count = (int) strlen(item)) < (LEN_STATES - 40 - (tt - start))) 3667 { 3668 tt = ap(start, LEN_STATES, tt, 3669 "%s", item); 3670 } 3671 sum += s_time; 3672 } 3673 } 3674 3675 tt = ap(start, LEN_STATES, tt, 3676 "; running time: %s\"", l_mktime(sum)); 3677 3678 tt = add_var(&out->kv_list, 32, RO); 3679 snprintf(tt, 32, "refclock_id=\"%s\"", parse->parse_type->cl_id); 3680 3681 tt = add_var(&out->kv_list, 80, RO); 3682 snprintf(tt, 80, "refclock_iomode=\"%s\"", parse->binding->bd_description); 3683 3684 tt = add_var(&out->kv_list, 128, RO); 3685 snprintf(tt, 128, "refclock_driver_version=\"%s\"", rcsid); 3686 3687 { 3688 struct ctl_var *k; 3689 3690 k = parse->kv; 3691 while (k && !(k->flags & EOV)) 3692 { 3693 set_var(&out->kv_list, k->text, strlen(k->text)+1, k->flags); 3694 k++; 3695 } 3696 } 3697 3698 out->lencode = (u_short) strlen(outstatus); 3699 out->p_lastcode = outstatus; 3700 } 3701 } 3702 3703 /**=========================================================================== 3704 ** processing routines 3705 **/ 3706 3707 /*-------------------------------------------------- 3708 * event handling - note that nominal events will also be posted 3709 * keep track of state dwelling times 3710 */ 3711 static void 3712 parse_event( 3713 struct parseunit *parse, 3714 int event 3715 ) 3716 { 3717 if (parse->generic->currentstatus != (u_char) event) 3718 { 3719 parse->statetime[parse->generic->currentstatus] += current_time - parse->lastchange; 3720 parse->lastchange = current_time; 3721 3722 if (parse->parse_type->cl_event) 3723 parse->parse_type->cl_event(parse, event); 3724 3725 if (event == CEVNT_NOMINAL) 3726 { 3727 NLOG(NLOG_CLOCKSTATUS) 3728 msyslog(LOG_INFO, "PARSE receiver #%d: SYNCHRONIZED", 3729 CLK_UNIT(parse->peer)); 3730 } 3731 3732 refclock_report(parse->peer, event); 3733 } 3734 } 3735 3736 /*-------------------------------------------------- 3737 * process a PARSE time sample 3738 */ 3739 static void 3740 parse_process( 3741 struct parseunit *parse, 3742 parsetime_t *parsetime 3743 ) 3744 { 3745 l_fp off, rectime, reftime; 3746 double fudge; 3747 3748 /* silence warning: 'off.Ul_i.Xl_i' may be used uninitialized in this function */ 3749 ZERO(off); 3750 3751 /* 3752 * check for changes in conversion status 3753 * (only one for each new status !) 3754 */ 3755 if (((parsetime->parse_status & CVT_MASK) != CVT_OK) && 3756 ((parsetime->parse_status & CVT_MASK) != CVT_NONE) && 3757 (parse->timedata.parse_status != parsetime->parse_status)) 3758 { 3759 char buffer[400]; 3760 3761 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3762 msyslog(LOG_WARNING, "PARSE receiver #%d: conversion status \"%s\"", 3763 CLK_UNIT(parse->peer), parsestatus(parsetime->parse_status, buffer, sizeof(buffer))); 3764 3765 if ((parsetime->parse_status & CVT_MASK) == CVT_FAIL) 3766 { 3767 /* 3768 * tell more about the story - list time code 3769 * there is a slight change for a race condition and 3770 * the time code might be overwritten by the next packet 3771 */ 3772 parsectl_t tmpctl; 3773 3774 if (!PARSE_GETTIMECODE(parse, &tmpctl)) 3775 { 3776 ERR(ERR_INTERNAL) 3777 msyslog(LOG_ERR, "PARSE receiver #%d: parse_process: parse_timecode() FAILED", CLK_UNIT(parse->peer)); 3778 } 3779 else 3780 { 3781 ERR(ERR_BADDATA) 3782 msyslog(LOG_WARNING, "PARSE receiver #%d: FAILED TIMECODE: \"%s\" (check receiver configuration / wiring)", 3783 CLK_UNIT(parse->peer), mkascii(buffer, sizeof buffer, tmpctl.parsegettc.parse_buffer, (unsigned)(tmpctl.parsegettc.parse_count - 1))); 3784 } 3785 } 3786 } 3787 3788 /* 3789 * examine status and post appropriate events 3790 */ 3791 if ((parsetime->parse_status & CVT_MASK) != CVT_OK) 3792 { 3793 /* 3794 * got bad data - tell the rest of the system 3795 */ 3796 switch (parsetime->parse_status & CVT_MASK) 3797 { 3798 case CVT_NONE: 3799 if ((parsetime->parse_status & CVT_ADDITIONAL) && 3800 parse->parse_type->cl_message) 3801 parse->parse_type->cl_message(parse, parsetime); 3802 /* 3803 * save PPS information that comes piggyback 3804 */ 3805 if (PARSE_PPS(parsetime->parse_state)) 3806 { 3807 parse->timedata.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 3808 parse->timedata.parse_ptime = parsetime->parse_ptime; 3809 } 3810 break; /* well, still waiting - timeout is handled at higher levels */ 3811 3812 case CVT_FAIL: 3813 if (parsetime->parse_status & CVT_BADFMT) 3814 { 3815 parse_event(parse, CEVNT_BADREPLY); 3816 } 3817 else 3818 if (parsetime->parse_status & CVT_BADDATE) 3819 { 3820 parse_event(parse, CEVNT_BADDATE); 3821 } 3822 else 3823 if (parsetime->parse_status & CVT_BADTIME) 3824 { 3825 parse_event(parse, CEVNT_BADTIME); 3826 } 3827 else 3828 { 3829 parse_event(parse, CEVNT_BADREPLY); /* for the lack of something better */ 3830 } 3831 } 3832 return; /* skip the rest - useless */ 3833 } 3834 3835 /* 3836 * check for format changes 3837 * (in case somebody has swapped clocks 8-) 3838 */ 3839 if (parse->lastformat != parsetime->parse_format) 3840 { 3841 parsectl_t tmpctl; 3842 3843 tmpctl.parseformat.parse_format = parsetime->parse_format; 3844 3845 if (!PARSE_GETFMT(parse, &tmpctl)) 3846 { 3847 ERR(ERR_INTERNAL) 3848 msyslog(LOG_ERR, "PARSE receiver #%d: parse_getfmt() FAILED", CLK_UNIT(parse->peer)); 3849 } 3850 else 3851 { 3852 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3853 msyslog(LOG_INFO, "PARSE receiver #%d: packet format \"%s\"", 3854 CLK_UNIT(parse->peer), tmpctl.parseformat.parse_buffer); 3855 } 3856 parse->lastformat = parsetime->parse_format; 3857 } 3858 3859 /* 3860 * now, any changes ? 3861 */ 3862 if ((parse->timedata.parse_state ^ parsetime->parse_state) & 3863 ~(unsigned)(PARSEB_PPS|PARSEB_S_PPS)) 3864 { 3865 char tmp1[200]; 3866 char tmp2[200]; 3867 /* 3868 * something happend - except for PPS events 3869 */ 3870 3871 (void) parsestate(parsetime->parse_state, tmp1, sizeof(tmp1)); 3872 (void) parsestate(parse->timedata.parse_state, tmp2, sizeof(tmp2)); 3873 3874 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3875 msyslog(LOG_INFO,"PARSE receiver #%d: STATE CHANGE: %s -> %s", 3876 CLK_UNIT(parse->peer), tmp2, tmp1); 3877 } 3878 3879 /* 3880 * carry on PPS information if still usable 3881 */ 3882 if (PARSE_PPS(parse->timedata.parse_state) && !PARSE_PPS(parsetime->parse_state)) 3883 { 3884 parsetime->parse_state |= PARSEB_PPS|PARSEB_S_PPS; 3885 parsetime->parse_ptime = parse->timedata.parse_ptime; 3886 } 3887 3888 /* 3889 * remember for future 3890 */ 3891 parse->timedata = *parsetime; 3892 3893 /* 3894 * check to see, whether the clock did a complete powerup or lost PZF signal 3895 * and post correct events for current condition 3896 */ 3897 if (PARSE_POWERUP(parsetime->parse_state)) 3898 { 3899 /* 3900 * this is bad, as we have completely lost synchronisation 3901 * well this is a problem with the receiver here 3902 * for PARSE Meinberg DCF77 receivers the lost synchronisation 3903 * is true as it is the powerup state and the time is taken 3904 * from a crude real time clock chip 3905 * for the PZF/GPS series this is only partly true, as 3906 * PARSE_POWERUP only means that the pseudo random 3907 * phase shift sequence cannot be found. this is only 3908 * bad, if we have never seen the clock in the SYNC 3909 * state, where the PHASE and EPOCH are correct. 3910 * for reporting events the above business does not 3911 * really matter, but we can use the time code 3912 * even in the POWERUP state after having seen 3913 * the clock in the synchronized state (PZF class 3914 * receivers) unless we have had a telegram disruption 3915 * after having seen the clock in the SYNC state. we 3916 * thus require having seen the clock in SYNC state 3917 * *after* having missed telegrams (noresponse) from 3918 * the clock. one problem remains: we might use erroneously 3919 * POWERUP data if the disruption is shorter than 1 polling 3920 * interval. fortunately powerdowns last usually longer than 64 3921 * seconds and the receiver is at least 2 minutes in the 3922 * POWERUP or NOSYNC state before switching to SYNC 3923 * for GPS receivers this can mean antenna problems and other causes. 3924 * the additional grace period can be enables by a clock 3925 * mode having the PARSE_F_POWERUPTRUST flag in cl_flag set. 3926 */ 3927 parse_event(parse, CEVNT_FAULT); 3928 NLOG(NLOG_CLOCKSTATUS) 3929 ERR(ERR_BADSTATUS) 3930 msyslog(LOG_ERR,"PARSE receiver #%d: NOT SYNCHRONIZED/RECEIVER PROBLEMS", 3931 CLK_UNIT(parse->peer)); 3932 } 3933 else 3934 { 3935 /* 3936 * we have two states left 3937 * 3938 * SYNC: 3939 * this state means that the EPOCH (timecode) and PHASE 3940 * information has be read correctly (at least two 3941 * successive PARSE timecodes were received correctly) 3942 * this is the best possible state - full trust 3943 * 3944 * NOSYNC: 3945 * The clock should be on phase with respect to the second 3946 * signal, but the timecode has not been received correctly within 3947 * at least the last two minutes. this is a sort of half baked state 3948 * for PARSE Meinberg DCF77 clocks this is bad news (clock running 3949 * without timecode confirmation) 3950 * PZF 535 has also no time confirmation, but the phase should be 3951 * very precise as the PZF signal can be decoded 3952 */ 3953 3954 if (PARSE_SYNC(parsetime->parse_state)) 3955 { 3956 /* 3957 * currently completely synchronized - best possible state 3958 */ 3959 parse->lastsync = current_time; 3960 clear_err(parse, ERR_BADSTATUS); 3961 } 3962 else 3963 { 3964 /* 3965 * we have had some problems receiving the time code 3966 */ 3967 parse_event(parse, CEVNT_PROP); 3968 NLOG(NLOG_CLOCKSTATUS) 3969 ERR(ERR_BADSTATUS) 3970 msyslog(LOG_ERR,"PARSE receiver #%d: TIMECODE NOT CONFIRMED", 3971 CLK_UNIT(parse->peer)); 3972 } 3973 } 3974 3975 fudge = parse->generic->fudgetime1; /* standard RS232 Fudgefactor */ 3976 3977 if (PARSE_TIMECODE(parsetime->parse_state)) 3978 { 3979 rectime = parsetime->parse_stime.fp; 3980 off = reftime = parsetime->parse_time.fp; 3981 3982 L_SUB(&off, &rectime); /* prepare for PPS adjustments logic */ 3983 3984 #ifdef DEBUG 3985 if (debug > 3) 3986 printf("PARSE receiver #%d: Reftime %s, Recvtime %s - initial offset %s\n", 3987 CLK_UNIT(parse->peer), 3988 prettydate(&reftime), 3989 prettydate(&rectime), 3990 lfptoa(&off,6)); 3991 #endif 3992 } 3993 3994 if (PARSE_PPS(parsetime->parse_state) && CLK_PPS(parse->peer)) 3995 { 3996 l_fp offset; 3997 double ppsphaseadjust = parse->ppsphaseadjust; 3998 3999 #ifdef HAVE_PPSAPI 4000 /* 4001 * set fudge = 0.0 if already included in PPS time stamps 4002 */ 4003 if (parse->atom.pps_params.mode & (PPS_OFFSETCLEAR|PPS_OFFSETASSERT)) 4004 { 4005 ppsphaseadjust = 0.0; 4006 } 4007 #endif 4008 4009 /* 4010 * we have a PPS signal - much better than the RS232 stuff (we hope) 4011 */ 4012 offset = parsetime->parse_ptime.fp; 4013 4014 #ifdef DEBUG 4015 if (debug > 3) 4016 printf("PARSE receiver #%d: PPStime %s\n", 4017 CLK_UNIT(parse->peer), 4018 prettydate(&offset)); 4019 #endif 4020 if (PARSE_TIMECODE(parsetime->parse_state)) 4021 { 4022 if (M_ISGEQ(off.l_i, off.l_uf, -1, 0x80000000) && 4023 M_ISGEQ(0, 0x7fffffff, off.l_i, off.l_uf)) 4024 { 4025 fudge = ppsphaseadjust; /* pick PPS fudge factor */ 4026 4027 /* 4028 * RS232 offsets within [-0.5..0.5[ - take PPS offsets 4029 */ 4030 4031 if (parse->parse_type->cl_flags & PARSE_F_PPSONSECOND) 4032 { 4033 reftime = off = offset; 4034 if (reftime.l_uf & 0x80000000) 4035 reftime.l_ui++; 4036 reftime.l_uf = 0; 4037 4038 4039 /* 4040 * implied on second offset 4041 */ 4042 off.l_uf = ~off.l_uf; /* map [0.5..1[ -> [-0.5..0[ */ 4043 off.l_i = (off.l_uf & 0x80000000) ? -1 : 0; /* sign extend */ 4044 } 4045 else 4046 { 4047 /* 4048 * time code describes pulse 4049 */ 4050 reftime = off = parsetime->parse_time.fp; 4051 4052 L_SUB(&off, &offset); /* true offset */ 4053 } 4054 } 4055 /* 4056 * take RS232 offset when PPS when out of bounds 4057 */ 4058 } 4059 else 4060 { 4061 fudge = ppsphaseadjust; /* pick PPS fudge factor */ 4062 /* 4063 * Well, no time code to guide us - assume on second pulse 4064 * and pray, that we are within [-0.5..0.5[ 4065 */ 4066 off = offset; 4067 reftime = offset; 4068 if (reftime.l_uf & 0x80000000) 4069 reftime.l_ui++; 4070 reftime.l_uf = 0; 4071 /* 4072 * implied on second offset 4073 */ 4074 off.l_uf = ~off.l_uf; /* map [0.5..1[ -> [-0.5..0[ */ 4075 off.l_i = (off.l_uf & 0x80000000) ? -1 : 0; /* sign extend */ 4076 } 4077 } 4078 else 4079 { 4080 if (!PARSE_TIMECODE(parsetime->parse_state)) 4081 { 4082 /* 4083 * Well, no PPS, no TIMECODE, no more work ... 4084 */ 4085 if ((parsetime->parse_status & CVT_ADDITIONAL) && 4086 parse->parse_type->cl_message) 4087 parse->parse_type->cl_message(parse, parsetime); 4088 return; 4089 } 4090 } 4091 4092 #ifdef DEBUG 4093 if (debug > 3) 4094 printf("PARSE receiver #%d: Reftime %s, Recvtime %s - final offset %s\n", 4095 CLK_UNIT(parse->peer), 4096 prettydate(&reftime), 4097 prettydate(&rectime), 4098 lfptoa(&off,6)); 4099 #endif 4100 4101 4102 rectime = reftime; 4103 L_SUB(&rectime, &off); /* just to keep the ntp interface happy */ 4104 4105 #ifdef DEBUG 4106 if (debug > 3) 4107 printf("PARSE receiver #%d: calculated Reftime %s, Recvtime %s\n", 4108 CLK_UNIT(parse->peer), 4109 prettydate(&reftime), 4110 prettydate(&rectime)); 4111 #endif 4112 4113 if ((parsetime->parse_status & CVT_ADDITIONAL) && 4114 parse->parse_type->cl_message) 4115 parse->parse_type->cl_message(parse, parsetime); 4116 4117 if (PARSE_SYNC(parsetime->parse_state)) 4118 { 4119 /* 4120 * log OK status 4121 */ 4122 parse_event(parse, CEVNT_NOMINAL); 4123 } 4124 4125 clear_err(parse, ERR_BADIO); 4126 clear_err(parse, ERR_BADDATA); 4127 clear_err(parse, ERR_NODATA); 4128 clear_err(parse, ERR_INTERNAL); 4129 4130 /* 4131 * and now stick it into the clock machine 4132 * samples are only valid iff lastsync is not too old and 4133 * we have seen the clock in sync at least once 4134 * after the last time we didn't see an expected data telegram 4135 * at startup being not in sync is also bad just like 4136 * POWERUP state unless PARSE_F_POWERUPTRUST is set 4137 * see the clock states section above for more reasoning 4138 */ 4139 if (((current_time - parse->lastsync) > parse->maxunsync) || 4140 (parse->lastsync < parse->lastmissed) || 4141 ((parse->lastsync == 0) && !PARSE_SYNC(parsetime->parse_state)) || 4142 (((parse->parse_type->cl_flags & PARSE_F_POWERUPTRUST) == 0) && 4143 PARSE_POWERUP(parsetime->parse_state))) 4144 { 4145 parse->generic->leap = LEAP_NOTINSYNC; 4146 parse->lastsync = 0; /* wait for full sync again */ 4147 } 4148 else 4149 { 4150 if (PARSE_LEAPADD(parsetime->parse_state)) 4151 { 4152 /* 4153 * we pick this state also for time code that pass leap warnings 4154 * without direction information (as earth is currently slowing 4155 * down). 4156 */ 4157 parse->generic->leap = (parse->flags & PARSE_LEAP_DELETE) ? LEAP_DELSECOND : LEAP_ADDSECOND; 4158 } 4159 else 4160 if (PARSE_LEAPDEL(parsetime->parse_state)) 4161 { 4162 parse->generic->leap = LEAP_DELSECOND; 4163 } 4164 else 4165 { 4166 parse->generic->leap = LEAP_NOWARNING; 4167 } 4168 } 4169 4170 if (parse->generic->leap != LEAP_NOTINSYNC) 4171 { 4172 /* 4173 * only good/trusted samples are interesting 4174 */ 4175 #ifdef DEBUG 4176 if (debug > 2) 4177 { 4178 printf("PARSE receiver #%d: refclock_process_offset(reftime=%s, rectime=%s, Fudge=%f)\n", 4179 CLK_UNIT(parse->peer), 4180 prettydate(&reftime), 4181 prettydate(&rectime), 4182 fudge); 4183 } 4184 #endif 4185 parse->generic->lastref = reftime; 4186 4187 refclock_process_offset(parse->generic, reftime, rectime, fudge); 4188 4189 #ifdef HAVE_PPSAPI 4190 /* 4191 * pass PPS information on to PPS clock 4192 */ 4193 if (PARSE_PPS(parsetime->parse_state) && CLK_PPS(parse->peer)) 4194 { 4195 parse->peer->flags |= (FLAG_PPS | FLAG_TSTAMP_PPS); 4196 parse_hardpps(parse, PARSE_HARDPPS_ENABLE); 4197 } 4198 #endif 4199 } else { 4200 parse_hardpps(parse, PARSE_HARDPPS_DISABLE); 4201 parse->peer->flags &= ~(FLAG_PPS | FLAG_TSTAMP_PPS); 4202 } 4203 4204 /* 4205 * ready, unless the machine wants a sample or 4206 * we are in fast startup mode (peer->dist > MAXDISTANCE) 4207 */ 4208 if (!parse->pollneeddata && parse->peer->disp <= MAXDISTANCE) 4209 return; 4210 4211 parse->pollneeddata = 0; 4212 4213 parse->timedata.parse_state &= ~(unsigned)(PARSEB_PPS|PARSEB_S_PPS); 4214 4215 refclock_receive(parse->peer); 4216 } 4217 4218 /**=========================================================================== 4219 ** special code for special clocks 4220 **/ 4221 4222 static void 4223 mk_utcinfo( 4224 char *t, // pointer to the output string buffer 4225 int wnt, 4226 int wnlsf, 4227 int dn, 4228 int dtls, 4229 int dtlsf, 4230 int size // size of the output string buffer 4231 ) 4232 { 4233 /* 4234 * The week number transmitted by the GPS satellites for the leap date 4235 * is truncated to 8 bits only. If the nearest leap second date is off 4236 * the current date by more than +/- 128 weeks then conversion to a 4237 * calendar date is ambiguous. On the other hand, if a leap second is 4238 * currently being announced (i.e. dtlsf != dtls) then the week number 4239 * wnlsf is close enough, and we can unambiguously determine the date 4240 * for which the leap second is scheduled. 4241 */ 4242 if ( dtlsf != dtls ) 4243 { 4244 time_t t_ls; 4245 struct tm *tm; 4246 int n = 0; 4247 4248 if (wnlsf < GPSWRAP) 4249 wnlsf += GPSWEEKS; 4250 4251 if (wnt < GPSWRAP) 4252 wnt += GPSWEEKS; 4253 4254 t_ls = (time_t) wnlsf * SECSPERWEEK 4255 + (time_t) dn * SECSPERDAY 4256 + GPS_SEC_BIAS - 1; 4257 4258 tm = gmtime( &t_ls ); 4259 if (tm == NULL) // gmtime() failed 4260 { 4261 snprintf( t, size, "** (gmtime() failed in mk_utcinfo())" ); 4262 return; 4263 } 4264 4265 n += snprintf( t, size, "UTC offset transition from %is to %is due to leap second %s", 4266 dtls, dtlsf, ( dtls < dtlsf ) ? "insertion" : "deletion" ); 4267 n += snprintf( t + n, size - n, " at UTC midnight at the end of %s, %04i-%02i-%02i", 4268 daynames[tm->tm_wday], tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday ); 4269 } 4270 else 4271 snprintf( t, size, "UTC offset parameter: %is, no leap second announced.\n", dtls ); 4272 4273 } 4274 4275 #ifdef CLOCK_MEINBERG 4276 /**=========================================================================== 4277 ** Meinberg GPS receiver support 4278 **/ 4279 4280 /*------------------------------------------------------------ 4281 * gps16x_message - process messages from Meinberg GPS receiver 4282 */ 4283 static void 4284 gps16x_message( 4285 struct parseunit *parse, 4286 parsetime_t *parsetime 4287 ) 4288 { 4289 if (parse->timedata.parse_msglen && parsetime->parse_msg[0] == SOH) 4290 { 4291 GPS_MSG_HDR header; 4292 unsigned char *bufp = (unsigned char *)parsetime->parse_msg + 1; 4293 4294 #ifdef DEBUG 4295 if (debug > 2) 4296 { 4297 char msgbuffer[600]; 4298 4299 mkreadable(msgbuffer, sizeof(msgbuffer), (char *)parsetime->parse_msg, parsetime->parse_msglen, 1); 4300 printf("PARSE receiver #%d: received message (%d bytes) >%s<\n", 4301 CLK_UNIT(parse->peer), 4302 parsetime->parse_msglen, 4303 msgbuffer); 4304 } 4305 #endif 4306 get_mbg_header(&bufp, &header); 4307 if (header.hdr_csum == mbg_csum(parsetime->parse_msg + 1, 6) && 4308 (header.len == 0 || 4309 (header.len < sizeof(parsetime->parse_msg) && 4310 header.data_csum == mbg_csum(bufp, header.len)))) 4311 { 4312 /* 4313 * clean message 4314 */ 4315 switch (header.cmd) 4316 { 4317 case GPS_SW_REV: 4318 { 4319 char buffer[64]; 4320 SW_REV gps_sw_rev; 4321 4322 get_mbg_sw_rev(&bufp, &gps_sw_rev); 4323 snprintf(buffer, sizeof(buffer), "meinberg_gps_version=\"%x.%02x%s%s\"", 4324 (gps_sw_rev.code >> 8) & 0xFF, 4325 gps_sw_rev.code & 0xFF, 4326 gps_sw_rev.name[0] ? " " : "", 4327 gps_sw_rev.name); 4328 set_var(&parse->kv, buffer, strlen(buffer)+1, RO|DEF); 4329 } 4330 break; 4331 4332 case GPS_BVAR_STAT: 4333 { 4334 static struct state 4335 { 4336 BVAR_STAT flag; /* status flag */ 4337 const char *string; /* bit name */ 4338 } states[] = 4339 { 4340 { BVAR_CFGH_INVALID, "Configuration/Health" }, 4341 { BVAR_ALM_NOT_COMPLETE, "Almanachs" }, 4342 { BVAR_UTC_INVALID, "UTC Correction" }, 4343 { BVAR_IONO_INVALID, "Ionospheric Correction" }, 4344 { BVAR_RCVR_POS_INVALID, "Receiver Position" }, 4345 { 0, "" } 4346 }; 4347 BVAR_STAT status; 4348 struct state *s = states; 4349 char buffer[512]; 4350 char *p, *b; 4351 4352 status = (BVAR_STAT) get_lsb_short(&bufp); 4353 p = b = buffer; 4354 p = ap(buffer, sizeof(buffer), p, 4355 "meinberg_gps_status=\"[0x%04x] ", 4356 status); 4357 4358 if (status) 4359 { 4360 p = ap(buffer, sizeof(buffer), p, "incomplete buffered data: "); 4361 b = p; 4362 while (s->flag) 4363 { 4364 if (status & s->flag) 4365 { 4366 if (p != b) 4367 { 4368 p = ap(buffer, sizeof(buffer), p, ", "); 4369 } 4370 4371 p = ap(buffer, sizeof(buffer), p, "%s", (const char *)s->string); 4372 } 4373 s++; 4374 } 4375 p = ap(buffer, sizeof(buffer), p, "\""); 4376 } 4377 else 4378 { 4379 p = ap(buffer, sizeof(buffer), p, "<all buffered data complete>\""); 4380 } 4381 4382 set_var(&parse->kv, buffer, strlen(buffer)+1, RO|DEF); 4383 } 4384 break; 4385 4386 case GPS_POS_XYZ: 4387 { 4388 XYZ xyz; 4389 char buffer[256]; 4390 4391 get_mbg_xyz(&bufp, xyz); 4392 snprintf(buffer, sizeof(buffer), "gps_position(XYZ)=\"%s m, %s m, %s m\"", 4393 mfptoa(xyz[XP].l_ui, xyz[XP].l_uf, 1), 4394 mfptoa(xyz[YP].l_ui, xyz[YP].l_uf, 1), 4395 mfptoa(xyz[ZP].l_ui, xyz[ZP].l_uf, 1)); 4396 4397 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4398 } 4399 break; 4400 4401 case GPS_POS_LLA: 4402 { 4403 LLA lla; 4404 char buffer[256]; 4405 4406 get_mbg_lla(&bufp, lla); 4407 4408 snprintf(buffer, sizeof(buffer), "gps_position(LLA)=\"%s deg, %s deg, %s m\"", 4409 mfptoa(lla[LAT].l_ui, lla[LAT].l_uf, 4), 4410 mfptoa(lla[LON].l_ui, lla[LON].l_uf, 4), 4411 mfptoa(lla[ALT].l_ui, lla[ALT].l_uf, 1)); 4412 4413 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4414 } 4415 break; 4416 4417 case GPS_TZDL: 4418 break; 4419 4420 case GPS_PORT_PARM: 4421 break; 4422 4423 case GPS_SYNTH: 4424 break; 4425 4426 case GPS_ANT_INFO: 4427 { 4428 ANT_INFO antinfo; 4429 char buffer[512]; 4430 char *p, *q; 4431 4432 get_mbg_antinfo(&bufp, &antinfo); 4433 p = buffer; 4434 p = ap(buffer, sizeof(buffer), p, "meinberg_antenna_status=\""); 4435 switch (antinfo.status) 4436 { 4437 case ANT_INVALID: // No other fields valid since antenna has not yet been disconnected 4438 p = ap(buffer, sizeof(buffer), 4439 p, "<OK>"); 4440 break; 4441 4442 case ANT_DISCONN: // Antenna is disconnected, tm_reconn and delta_t not yet set 4443 q = ap(buffer, sizeof(buffer), 4444 p, "DISCONNECTED since "); 4445 NLOG(NLOG_CLOCKSTATUS) 4446 ERR(ERR_BADSTATUS) 4447 msyslog(LOG_ERR,"PARSE receiver #%d: ANTENNA FAILURE: %s", 4448 CLK_UNIT(parse->peer), p); 4449 4450 p = q; 4451 mbg_tm_str(&p, &antinfo.tm_disconn, BUFFER_SIZE(buffer, p), 0); 4452 *p = '\0'; 4453 break; 4454 4455 case ANT_RECONN: // Antenna had been disconnect, but receiver sync. after reconnect, so all fields valid 4456 p = ap(buffer, sizeof(buffer), 4457 p, "SYNC AFTER RECONNECT on "); 4458 mbg_tm_str(&p, &antinfo.tm_reconn, BUFFER_SIZE(buffer, p), 0); 4459 p = ap(buffer, sizeof(buffer), 4460 p, ", clock offset at reconnect %c%ld.%07ld s, disconnect time ", 4461 (antinfo.delta_t < 0) ? '-' : '+', 4462 (long) ABS(antinfo.delta_t) / 10000, 4463 (long) ABS(antinfo.delta_t) % 10000); 4464 mbg_tm_str(&p, &antinfo.tm_disconn, BUFFER_SIZE(buffer, p), 0); 4465 *p = '\0'; 4466 break; 4467 4468 default: 4469 p = ap(buffer, sizeof(buffer), 4470 p, "bad status 0x%04x", 4471 antinfo.status); 4472 break; 4473 } 4474 4475 p = ap(buffer, sizeof(buffer), p, "\""); 4476 4477 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4478 } 4479 break; 4480 4481 case GPS_UCAP: 4482 break; 4483 4484 case GPS_CFGH: 4485 { 4486 CFGH cfgh; 4487 char buffer[512]; 4488 char *p; 4489 4490 get_mbg_cfgh(&bufp, &cfgh); 4491 if (cfgh.valid) 4492 { 4493 const char *cp; 4494 uint16_t tmp_val; 4495 int i; 4496 4497 p = buffer; 4498 p = ap(buffer, sizeof(buffer), 4499 p, "gps_tot_51=\""); 4500 mbg_tgps_str(&p, &cfgh.tot_51, BUFFER_SIZE(buffer, p)); 4501 p = ap(buffer, sizeof(buffer), 4502 p, "\""); 4503 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4504 4505 p = buffer; 4506 p = ap(buffer, sizeof(buffer), 4507 p, "gps_tot_63=\""); 4508 mbg_tgps_str(&p, &cfgh.tot_63, BUFFER_SIZE(buffer, p)); 4509 p = ap(buffer, sizeof(buffer), 4510 p, "\""); 4511 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4512 4513 p = buffer; 4514 p = ap(buffer, sizeof(buffer), 4515 p, "gps_t0a=\""); 4516 mbg_tgps_str(&p, &cfgh.t0a, BUFFER_SIZE(buffer, p)); 4517 p = ap(buffer, sizeof(buffer), 4518 p, "\""); 4519 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4520 4521 for (i = 0; i < N_SVNO_GPS; i++) 4522 { 4523 p = buffer; 4524 p = ap(buffer, sizeof(buffer), p, "sv_info[%d]=\"PRN%d", i, i + N_SVNO_GPS); 4525 4526 tmp_val = cfgh.health[i]; /* a 6 bit SV health code */ 4527 p = ap(buffer, sizeof(buffer), p, "; health=0x%02x (", tmp_val); 4528 /* "All Ones" has a special meaning" */ 4529 if (tmp_val == 0x3F) /* satellite is unusable or doesn't even exist */ 4530 cp = "SV UNAVAILABLE"; 4531 else { 4532 /* The MSB contains a summary of the 3 MSBs of the 8 bit health code, 4533 * indicating if the data sent by the satellite is OK or not. */ 4534 p = ap(buffer, sizeof(buffer), p, "DATA %s, ", (tmp_val & 0x20) ? "BAD" : "OK" ); 4535 4536 /* The 5 LSBs contain the status of the different signals sent by the satellite. */ 4537 switch (tmp_val & 0x1F) 4538 { 4539 case 0x00: cp = "SIGNAL OK"; break; 4540 /* codes 0x01 through 0x1B indicate that one or more 4541 * specific signal components are weak or dead. 4542 * We don't decode this here in detail. */ 4543 case 0x1C: cp = "SV IS TEMP OUT"; break; 4544 case 0x1D: cp = "SV WILL BE TEMP OUT"; break; 4545 default: cp = "TRANSMISSION PROBLEMS"; break; 4546 } 4547 } 4548 p = ap(buffer, sizeof(buffer), p, "%s)", cp ); 4549 4550 tmp_val = cfgh.cfg[i]; /* a 4 bit SV configuration/type code */ 4551 p = ap(buffer, sizeof(buffer), p, "; cfg=0x%02x (", tmp_val); 4552 switch (tmp_val & 0x7) 4553 { 4554 case 0x00: cp = "(reserved)"; break; 4555 case 0x01: cp = "BLOCK II/IIA/IIR"; break; 4556 case 0x02: cp = "BLOCK IIR-M"; break; 4557 case 0x03: cp = "BLOCK IIF"; break; 4558 case 0x04: cp = "BLOCK III"; break; 4559 default: cp = "unknown SV type"; break; 4560 } 4561 p = ap(buffer, sizeof(buffer), p, "%s", cp ); 4562 if (tmp_val & 0x08) /* A-S is on, P-code is encrypted */ 4563 p = ap( buffer, sizeof(buffer), p, ", A-S on" ); 4564 4565 p = ap(buffer, sizeof(buffer), p, ")\""); 4566 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4567 } 4568 } 4569 } 4570 break; 4571 4572 case GPS_ALM: 4573 break; 4574 4575 case GPS_EPH: 4576 break; 4577 4578 case GPS_UTC: 4579 { 4580 UTC utc; 4581 char buffer[512]; 4582 char *p; 4583 4584 p = buffer; 4585 4586 get_mbg_utc(&bufp, &utc); 4587 4588 if (utc.valid) 4589 { 4590 p = ap(buffer, sizeof(buffer), p, "gps_utc_correction=\""); 4591 mk_utcinfo(p, utc.t0t.wn, utc.WNlsf, utc.DNt, utc.delta_tls, utc.delta_tlsf, BUFFER_SIZE(buffer, p)); 4592 p += strlen(p); 4593 p = ap(buffer, sizeof(buffer), p, "\""); 4594 } 4595 else 4596 { 4597 p = ap(buffer, sizeof(buffer), p, "gps_utc_correction=\"<NO UTC DATA>\""); 4598 } 4599 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4600 } 4601 break; 4602 4603 case GPS_IONO: 4604 break; 4605 4606 case GPS_ASCII_MSG: 4607 { 4608 ASCII_MSG gps_ascii_msg; 4609 char buffer[128]; 4610 4611 get_mbg_ascii_msg(&bufp, &gps_ascii_msg); 4612 4613 if (gps_ascii_msg.valid) 4614 { 4615 char buffer1[128]; 4616 mkreadable(buffer1, sizeof(buffer1), gps_ascii_msg.s, strlen(gps_ascii_msg.s), (int)0); 4617 4618 snprintf(buffer, sizeof(buffer), "gps_message=\"%s\"", buffer1); 4619 } 4620 else 4621 snprintf(buffer, sizeof(buffer), "gps_message=<NONE>"); 4622 4623 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4624 } 4625 4626 break; 4627 4628 default: 4629 break; 4630 } 4631 } 4632 else 4633 { 4634 msyslog(LOG_DEBUG, "PARSE receiver #%d: gps16x_message: message checksum error: hdr_csum = 0x%x (expected 0x%x), " 4635 "data_len = %d, data_csum = 0x%x (expected 0x%x)", 4636 CLK_UNIT(parse->peer), 4637 header.hdr_csum, mbg_csum(parsetime->parse_msg + 1, 6), 4638 header.len, 4639 header.data_csum, mbg_csum(bufp, (unsigned)((header.len < sizeof(parsetime->parse_msg)) ? header.len : 0))); 4640 } 4641 } 4642 4643 return; 4644 } 4645 4646 /*------------------------------------------------------------ 4647 * gps16x_poll - query the reciver peridically 4648 */ 4649 static void 4650 gps16x_poll( 4651 struct peer *peer 4652 ) 4653 { 4654 struct parseunit *parse = peer->procptr->unitptr; 4655 4656 static GPS_MSG_HDR sequence[] = 4657 { 4658 { GPS_SW_REV, 0, 0, 0 }, 4659 { GPS_BVAR_STAT, 0, 0, 0 }, 4660 { GPS_UTC, 0, 0, 0 }, 4661 { GPS_ASCII_MSG, 0, 0, 0 }, 4662 { GPS_ANT_INFO, 0, 0, 0 }, 4663 { GPS_CFGH, 0, 0, 0 }, 4664 { GPS_POS_XYZ, 0, 0, 0 }, 4665 { GPS_POS_LLA, 0, 0, 0 }, 4666 { (unsigned short)~0, 0, 0, 0 } 4667 }; 4668 4669 int rtc; 4670 unsigned char cmd_buffer[64]; 4671 unsigned char *outp = cmd_buffer; 4672 GPS_MSG_HDR *header; 4673 4674 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4675 { 4676 parse->peer->procptr->nextaction = current_time + ((poll_info_t *)parse->parse_type->cl_data)->rate; 4677 } 4678 4679 if (sequence[parse->localstate].cmd == (unsigned short)~0) 4680 parse->localstate = 0; 4681 4682 header = sequence + parse->localstate++; 4683 4684 *outp++ = SOH; /* start command */ 4685 4686 put_mbg_header(&outp, header); 4687 outp = cmd_buffer + 1; 4688 4689 header->hdr_csum = (short)mbg_csum(outp, 6); 4690 put_mbg_header(&outp, header); 4691 4692 #ifdef DEBUG 4693 if (debug > 2) 4694 { 4695 char buffer[128]; 4696 4697 mkreadable(buffer, sizeof(buffer), (char *)cmd_buffer, (unsigned)(outp - cmd_buffer), 1); 4698 printf("PARSE receiver #%d: transmitted message #%ld (%d bytes) >%s<\n", 4699 CLK_UNIT(parse->peer), 4700 parse->localstate - 1, 4701 (int)(outp - cmd_buffer), 4702 buffer); 4703 } 4704 #endif 4705 4706 rtc = (int) write(parse->generic->io.fd, cmd_buffer, (unsigned long)(outp - cmd_buffer)); 4707 4708 if (rtc < 0) 4709 { 4710 ERR(ERR_BADIO) 4711 msyslog(LOG_ERR, "PARSE receiver #%d: gps16x_poll: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 4712 } 4713 else 4714 if (rtc != outp - cmd_buffer) 4715 { 4716 ERR(ERR_BADIO) 4717 msyslog(LOG_ERR, "PARSE receiver #%d: gps16x_poll: failed to send cmd incomplete (%d of %d bytes sent)", CLK_UNIT(parse->peer), rtc, (int)(outp - cmd_buffer)); 4718 } 4719 4720 clear_err(parse, ERR_BADIO); 4721 return; 4722 } 4723 4724 /*-------------------------------------------------- 4725 * init routine - setup timer 4726 */ 4727 static int 4728 gps16x_poll_init( 4729 struct parseunit *parse 4730 ) 4731 { 4732 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4733 { 4734 parse->peer->procptr->action = gps16x_poll; 4735 gps16x_poll(parse->peer); 4736 } 4737 4738 return 0; 4739 } 4740 4741 #else 4742 static void 4743 gps16x_message( 4744 struct parseunit *parse, 4745 parsetime_t *parsetime 4746 ) 4747 {} 4748 static int 4749 gps16x_poll_init( 4750 struct parseunit *parse 4751 ) 4752 { 4753 return 1; 4754 } 4755 #endif /* CLOCK_MEINBERG */ 4756 4757 /**=========================================================================== 4758 ** clock polling support 4759 **/ 4760 4761 /*-------------------------------------------------- 4762 * direct poll routine 4763 */ 4764 static void 4765 poll_dpoll( 4766 struct parseunit *parse 4767 ) 4768 { 4769 long rtc; 4770 const char *ps = ((poll_info_t *)parse->parse_type->cl_data)->string; 4771 long ct = ((poll_info_t *)parse->parse_type->cl_data)->count; 4772 4773 rtc = write(parse->generic->io.fd, ps, ct); 4774 if (rtc < 0) 4775 { 4776 ERR(ERR_BADIO) 4777 msyslog(LOG_ERR, "PARSE receiver #%d: poll_dpoll: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 4778 } 4779 else 4780 if (rtc != ct) 4781 { 4782 ERR(ERR_BADIO) 4783 msyslog(LOG_ERR, "PARSE receiver #%d: poll_dpoll: failed to send cmd incomplete (%ld of %ld bytes sent)", CLK_UNIT(parse->peer), rtc, ct); 4784 } 4785 clear_err(parse, ERR_BADIO); 4786 } 4787 4788 /*-------------------------------------------------- 4789 * periodic poll routine 4790 */ 4791 static void 4792 poll_poll( 4793 struct peer *peer 4794 ) 4795 { 4796 struct parseunit *parse = peer->procptr->unitptr; 4797 4798 if (parse->parse_type->cl_poll) 4799 parse->parse_type->cl_poll(parse); 4800 4801 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4802 { 4803 parse->peer->procptr->nextaction = current_time + ((poll_info_t *)parse->parse_type->cl_data)->rate; 4804 } 4805 } 4806 4807 /*-------------------------------------------------- 4808 * init routine - setup timer 4809 */ 4810 static int 4811 poll_init( 4812 struct parseunit *parse 4813 ) 4814 { 4815 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4816 { 4817 parse->peer->procptr->action = poll_poll; 4818 poll_poll(parse->peer); 4819 } 4820 4821 return 0; 4822 } 4823 4824 /**=========================================================================== 4825 ** Trimble support 4826 **/ 4827 4828 /*------------------------------------------------------------- 4829 * trimble TAIP init routine - setup EOL and then do poll_init. 4830 */ 4831 static int 4832 trimbletaip_init( 4833 struct parseunit *parse 4834 ) 4835 { 4836 #ifdef HAVE_TERMIOS 4837 struct termios tio; 4838 #endif 4839 #ifdef HAVE_SYSV_TTYS 4840 struct termio tio; 4841 #endif 4842 /* 4843 * configure terminal line for trimble receiver 4844 */ 4845 if (TTY_GETATTR(parse->generic->io.fd, &tio) == -1) 4846 { 4847 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_init: tcgetattr(fd, &tio): %m", CLK_UNIT(parse->peer)); 4848 return 0; 4849 } 4850 else 4851 { 4852 tio.c_cc[VEOL] = TRIMBLETAIP_EOL; 4853 4854 if (TTY_SETATTR(parse->generic->io.fd, &tio) == -1) 4855 { 4856 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_init: tcsetattr(fd, &tio): %m", CLK_UNIT(parse->peer)); 4857 return 0; 4858 } 4859 } 4860 return poll_init(parse); 4861 } 4862 4863 /*-------------------------------------------------- 4864 * trimble TAIP event routine - reset receiver upon data format trouble 4865 */ 4866 static const char *taipinit[] = { 4867 ">FPV00000000<", 4868 ">SRM;ID_FLAG=F;CS_FLAG=T;EC_FLAG=F;FR_FLAG=T;CR_FLAG=F<", 4869 ">FTM00020001<", 4870 (char *)0 4871 }; 4872 4873 static void 4874 trimbletaip_event( 4875 struct parseunit *parse, 4876 int event 4877 ) 4878 { 4879 switch (event) 4880 { 4881 case CEVNT_BADREPLY: /* reset on garbled input */ 4882 case CEVNT_TIMEOUT: /* reset on no input */ 4883 { 4884 const char **iv; 4885 4886 iv = taipinit; 4887 while (*iv) 4888 { 4889 int rtc = (int) write(parse->generic->io.fd, *iv, strlen(*iv)); 4890 if (rtc < 0) 4891 { 4892 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 4893 return; 4894 } 4895 else 4896 { 4897 if (rtc != (int)strlen(*iv)) 4898 { 4899 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: failed to send cmd incomplete (%d of %d bytes sent)", 4900 CLK_UNIT(parse->peer), rtc, (int)strlen(*iv)); 4901 return; 4902 } 4903 } 4904 iv++; 4905 } 4906 4907 NLOG(NLOG_CLOCKINFO) 4908 ERR(ERR_BADIO) 4909 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: RECEIVER INITIALIZED", 4910 CLK_UNIT(parse->peer)); 4911 } 4912 break; 4913 4914 default: /* ignore */ 4915 break; 4916 } 4917 } 4918 4919 /* 4920 * This driver supports the Trimble SVee Six Plus GPS receiver module. 4921 * It should support other Trimble receivers which use the Trimble Standard 4922 * Interface Protocol (see below). 4923 * 4924 * The module has a serial I/O port for command/data and a 1 pulse-per-second 4925 * output, about 1 microsecond wide. The leading edge of the pulse is 4926 * coincident with the change of the GPS second. This is the same as 4927 * the change of the UTC second +/- ~1 microsecond. Some other clocks 4928 * specifically use a feature in the data message as a timing reference, but 4929 * the SVee Six Plus does not do this. In fact there is considerable jitter 4930 * on the timing of the messages, so this driver only supports the use 4931 * of the PPS pulse for accurate timing. Where it is determined that 4932 * the offset is way off, when first starting up ntpd for example, 4933 * the timing of the data stream is used until the offset becomes low enough 4934 * (|offset| < CLOCK_MAX), at which point the pps offset is used. 4935 * 4936 * It can use either option for receiving PPS information - the 'ppsclock' 4937 * stream pushed onto the serial data interface to timestamp the Carrier 4938 * Detect interrupts, where the 1PPS connects to the CD line. This only 4939 * works on SunOS 4.1.x currently. To select this, define PPSPPS in 4940 * Config.local. The other option is to use a pulse-stretcher/level-converter 4941 * to convert the PPS pulse into a RS232 start pulse & feed this into another 4942 * tty port. To use this option, define PPSCLK in Config.local. The pps input, 4943 * by whichever method, is handled in ntp_loopfilter.c 4944 * 4945 * The receiver uses a serial message protocol called Trimble Standard 4946 * Interface Protocol (it can support others but this driver only supports 4947 * TSIP). Messages in this protocol have the following form: 4948 * 4949 * <DLE><id> ... <data> ... <DLE><ETX> 4950 * 4951 * Any bytes within the <data> portion of value 10 hex (<DLE>) are doubled 4952 * on transmission and compressed back to one on reception. Otherwise 4953 * the values of data bytes can be anything. The serial interface is RS-422 4954 * asynchronous using 9600 baud, 8 data bits with odd party (**note** 9 bits 4955 * in total!), and 1 stop bit. The protocol supports byte, integer, single, 4956 * and double datatypes. Integers are two bytes, sent most significant first. 4957 * Singles are IEEE754 single precision floating point numbers (4 byte) sent 4958 * sign & exponent first. Doubles are IEEE754 double precision floating point 4959 * numbers (8 byte) sent sign & exponent first. 4960 * The receiver supports a large set of messages, only a small subset of 4961 * which are used here. From driver to receiver the following are used: 4962 * 4963 * ID Description 4964 * 4965 * 21 Request current time 4966 * 22 Mode Select 4967 * 2C Set/Request operating parameters 4968 * 2F Request UTC info 4969 * 35 Set/Request I/O options 4970 4971 * From receiver to driver the following are recognised: 4972 * 4973 * ID Description 4974 * 4975 * 41 GPS Time 4976 * 44 Satellite selection, PDOP, mode 4977 * 46 Receiver health 4978 * 4B Machine code/status 4979 * 4C Report operating parameters (debug only) 4980 * 4F UTC correction data (used to get leap second warnings) 4981 * 55 I/O options (debug only) 4982 * 4983 * All others are accepted but ignored. 4984 * 4985 */ 4986 4987 #define PI 3.1415926535898 /* lots of sig figs */ 4988 #define D2R PI/180.0 4989 4990 /*------------------------------------------------------------------- 4991 * sendcmd, sendbyte, sendetx, sendflt, sendint implement the command 4992 * interface to the receiver. 4993 * 4994 * CAVEAT: the sendflt, sendint routines are byte order dependend and 4995 * float implementation dependend - these must be converted to portable 4996 * versions ! 4997 * 4998 * CURRENT LIMITATION: float implementation. This runs only on systems 4999 * with IEEE754 floats as native floats 5000 */ 5001 5002 typedef struct trimble 5003 { 5004 u_long last_msg; /* last message received */ 5005 u_long last_reset; /* last time a reset was issued */ 5006 u_char qtracking; /* query tracking status */ 5007 u_long ctrack; /* current tracking set */ 5008 u_long ltrack; /* last tracking set */ 5009 } trimble_t; 5010 5011 union uval { 5012 u_char bd[8]; 5013 int iv; 5014 float fv; 5015 double dv; 5016 }; 5017 5018 struct txbuf 5019 { 5020 short idx; /* index to first unused byte */ 5021 u_char *txt; /* pointer to actual data buffer */ 5022 }; 5023 5024 void sendcmd (struct txbuf *buf, int c); 5025 void sendbyte (struct txbuf *buf, int b); 5026 void sendetx (struct txbuf *buf, struct parseunit *parse); 5027 void sendint (struct txbuf *buf, int a); 5028 void sendflt (struct txbuf *buf, double a); 5029 5030 void 5031 sendcmd( 5032 struct txbuf *buf, 5033 int c 5034 ) 5035 { 5036 buf->txt[0] = DLE; 5037 buf->txt[1] = (u_char)c; 5038 buf->idx = 2; 5039 } 5040 5041 void sendcmd (struct txbuf *buf, int c); 5042 void sendbyte (struct txbuf *buf, int b); 5043 void sendetx (struct txbuf *buf, struct parseunit *parse); 5044 void sendint (struct txbuf *buf, int a); 5045 void sendflt (struct txbuf *buf, double a); 5046 5047 void 5048 sendbyte( 5049 struct txbuf *buf, 5050 int b 5051 ) 5052 { 5053 if (b == DLE) 5054 buf->txt[buf->idx++] = DLE; 5055 buf->txt[buf->idx++] = (u_char)b; 5056 } 5057 5058 void 5059 sendetx( 5060 struct txbuf *buf, 5061 struct parseunit *parse 5062 ) 5063 { 5064 buf->txt[buf->idx++] = DLE; 5065 buf->txt[buf->idx++] = ETX; 5066 5067 if (write(parse->generic->io.fd, buf->txt, (unsigned long)buf->idx) != buf->idx) 5068 { 5069 ERR(ERR_BADIO) 5070 msyslog(LOG_ERR, "PARSE receiver #%d: sendetx: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 5071 } 5072 else 5073 { 5074 #ifdef DEBUG 5075 if (debug > 2) 5076 { 5077 char buffer[256]; 5078 5079 mkreadable(buffer, sizeof(buffer), (char *)buf->txt, (unsigned)buf->idx, 1); 5080 printf("PARSE receiver #%d: transmitted message (%d bytes) >%s<\n", 5081 CLK_UNIT(parse->peer), 5082 buf->idx, buffer); 5083 } 5084 #endif 5085 clear_err(parse, ERR_BADIO); 5086 } 5087 } 5088 5089 void 5090 sendint( 5091 struct txbuf *buf, 5092 int a 5093 ) 5094 { 5095 /* send 16bit int, msbyte first */ 5096 sendbyte(buf, (u_char)((a>>8) & 0xff)); 5097 sendbyte(buf, (u_char)(a & 0xff)); 5098 } 5099 5100 void 5101 sendflt( 5102 struct txbuf *buf, 5103 double a 5104 ) 5105 { 5106 int i; 5107 union uval uval; 5108 5109 uval.fv = (float) a; 5110 #ifdef WORDS_BIGENDIAN 5111 for (i=0; i<=3; i++) 5112 #else 5113 for (i=3; i>=0; i--) 5114 #endif 5115 sendbyte(buf, uval.bd[i]); 5116 } 5117 5118 #define TRIM_POS_OPT 0x13 /* output position with high precision */ 5119 #define TRIM_TIME_OPT 0x03 /* use UTC time stamps, on second */ 5120 5121 /*-------------------------------------------------- 5122 * trimble TSIP setup routine 5123 */ 5124 static int 5125 trimbletsip_setup( 5126 struct parseunit *parse, 5127 const char *reason 5128 ) 5129 { 5130 u_char buffer[256]; 5131 struct txbuf buf; 5132 trimble_t *t = parse->localdata; 5133 5134 if (t && t->last_reset && 5135 ((t->last_reset + TRIMBLE_RESET_HOLDOFF) > current_time)) { 5136 return 1; /* not yet */ 5137 } 5138 5139 if (t) 5140 t->last_reset = current_time; 5141 5142 buf.txt = buffer; 5143 5144 sendcmd(&buf, CMD_CVERSION); /* request software versions */ 5145 sendetx(&buf, parse); 5146 5147 sendcmd(&buf, CMD_COPERPARAM); /* set operating parameters */ 5148 sendbyte(&buf, 4); /* static */ 5149 sendflt(&buf, 5.0*D2R); /* elevation angle mask = 10 deg XXX */ 5150 sendflt(&buf, 4.0); /* s/n ratio mask = 6 XXX */ 5151 sendflt(&buf, 12.0); /* PDOP mask = 12 */ 5152 sendflt(&buf, 8.0); /* PDOP switch level = 8 */ 5153 sendetx(&buf, parse); 5154 5155 sendcmd(&buf, CMD_CMODESEL); /* fix mode select */ 5156 sendbyte(&buf, 1); /* time transfer mode */ 5157 sendetx(&buf, parse); 5158 5159 sendcmd(&buf, CMD_CMESSAGE); /* request system message */ 5160 sendetx(&buf, parse); 5161 5162 sendcmd(&buf, CMD_CSUPER); /* superpacket fix */ 5163 sendbyte(&buf, 0x2); /* binary mode */ 5164 sendetx(&buf, parse); 5165 5166 sendcmd(&buf, CMD_CIOOPTIONS); /* set I/O options */ 5167 sendbyte(&buf, TRIM_POS_OPT); /* position output */ 5168 sendbyte(&buf, 0x00); /* no velocity output */ 5169 sendbyte(&buf, TRIM_TIME_OPT); /* UTC, compute on seconds */ 5170 sendbyte(&buf, 0x00); /* no raw measurements */ 5171 sendetx(&buf, parse); 5172 5173 sendcmd(&buf, CMD_CUTCPARAM); /* request UTC correction data */ 5174 sendetx(&buf, parse); 5175 5176 NLOG(NLOG_CLOCKINFO) 5177 ERR(ERR_BADIO) 5178 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_setup: RECEIVER RE-INITIALIZED (%s)", CLK_UNIT(parse->peer), reason); 5179 5180 return 0; 5181 } 5182 5183 /*-------------------------------------------------- 5184 * TRIMBLE TSIP check routine 5185 */ 5186 static void 5187 trimble_check( 5188 struct peer *peer 5189 ) 5190 { 5191 struct parseunit *parse = peer->procptr->unitptr; 5192 trimble_t *t = parse->localdata; 5193 u_char buffer[256]; 5194 struct txbuf buf; 5195 buf.txt = buffer; 5196 5197 if (t) 5198 { 5199 if (current_time > t->last_msg + TRIMBLETSIP_IDLE_TIME) 5200 (void)trimbletsip_setup(parse, "message timeout"); 5201 } 5202 5203 poll_poll(parse->peer); /* emit query string and re-arm timer */ 5204 5205 if (t && t->qtracking) 5206 { 5207 u_long oldsats = t->ltrack & ~t->ctrack; 5208 5209 t->qtracking = 0; 5210 t->ltrack = t->ctrack; 5211 5212 if (oldsats) 5213 { 5214 int i; 5215 5216 for (i = 0; oldsats; i++) { 5217 if (oldsats & (1 << i)) 5218 { 5219 sendcmd(&buf, CMD_CSTATTRACK); 5220 sendbyte(&buf, i+1); /* old sat */ 5221 sendetx(&buf, parse); 5222 } 5223 oldsats &= ~(1 << i); 5224 } 5225 } 5226 5227 sendcmd(&buf, CMD_CSTATTRACK); 5228 sendbyte(&buf, 0x00); /* current tracking set */ 5229 sendetx(&buf, parse); 5230 } 5231 } 5232 5233 /*-------------------------------------------------- 5234 * TRIMBLE TSIP end routine 5235 */ 5236 static void 5237 trimbletsip_end( 5238 struct parseunit *parse 5239 ) 5240 { trimble_t *t = parse->localdata; 5241 5242 if (t) 5243 { 5244 free(t); 5245 parse->localdata = NULL; 5246 } 5247 parse->peer->procptr->nextaction = 0; 5248 parse->peer->procptr->action = NULL; 5249 } 5250 5251 /*-------------------------------------------------- 5252 * TRIMBLE TSIP init routine 5253 */ 5254 static int 5255 trimbletsip_init( 5256 struct parseunit *parse 5257 ) 5258 { 5259 #if defined(VEOL) || defined(VEOL2) 5260 #ifdef HAVE_TERMIOS 5261 struct termios tio; /* NEEDED FOR A LONG TIME ! */ 5262 #endif 5263 #ifdef HAVE_SYSV_TTYS 5264 struct termio tio; /* NEEDED FOR A LONG TIME ! */ 5265 #endif 5266 /* 5267 * allocate local data area 5268 */ 5269 if (!parse->localdata) 5270 { 5271 trimble_t *t; 5272 5273 t = (trimble_t *)(parse->localdata = emalloc(sizeof(trimble_t))); 5274 5275 if (t) 5276 { 5277 memset((char *)t, 0, sizeof(trimble_t)); 5278 t->last_msg = current_time; 5279 } 5280 } 5281 5282 parse->peer->procptr->action = trimble_check; 5283 parse->peer->procptr->nextaction = current_time; 5284 5285 /* 5286 * configure terminal line for ICANON mode with VEOL characters 5287 */ 5288 if (TTY_GETATTR(parse->generic->io.fd, &tio) == -1) 5289 { 5290 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_init: tcgetattr(%d, &tio): %m", CLK_UNIT(parse->peer), parse->generic->io.fd); 5291 return 0; 5292 } 5293 else 5294 { 5295 if ((parse_clockinfo[CLK_TYPE(parse->peer)].cl_lflag & ICANON)) 5296 { 5297 #ifdef VEOL 5298 tio.c_cc[VEOL] = ETX; 5299 #endif 5300 #ifdef VEOL2 5301 tio.c_cc[VEOL2] = DLE; 5302 #endif 5303 } 5304 5305 if (TTY_SETATTR(parse->generic->io.fd, &tio) == -1) 5306 { 5307 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_init: tcsetattr(%d, &tio): %m", CLK_UNIT(parse->peer), parse->generic->io.fd); 5308 return 0; 5309 } 5310 } 5311 #endif 5312 return trimbletsip_setup(parse, "initial startup"); 5313 } 5314 5315 /*------------------------------------------------------------ 5316 * trimbletsip_event - handle Trimble events 5317 * simple evente handler - attempt to re-initialize receiver 5318 */ 5319 static void 5320 trimbletsip_event( 5321 struct parseunit *parse, 5322 int event 5323 ) 5324 { 5325 switch (event) 5326 { 5327 case CEVNT_BADREPLY: /* reset on garbled input */ 5328 case CEVNT_TIMEOUT: /* reset on no input */ 5329 (void)trimbletsip_setup(parse, "event BAD_REPLY/TIMEOUT"); 5330 break; 5331 5332 default: /* ignore */ 5333 break; 5334 } 5335 } 5336 5337 /* 5338 * getflt, getint convert fields in the incoming data into the 5339 * appropriate type of item 5340 * 5341 * CAVEAT: these routines are currently definitely byte order dependent 5342 * and assume Representation(float) == IEEE754 5343 * These functions MUST be converted to portable versions (especially 5344 * converting the float representation into ntp_fp formats in order 5345 * to avoid floating point operations at all! 5346 */ 5347 5348 static float 5349 getflt( 5350 u_char *bp 5351 ) 5352 { 5353 union uval uval; 5354 5355 #ifdef WORDS_BIGENDIAN 5356 uval.bd[0] = *bp++; 5357 uval.bd[1] = *bp++; 5358 uval.bd[2] = *bp++; 5359 uval.bd[3] = *bp; 5360 #else /* ! WORDS_BIGENDIAN */ 5361 uval.bd[3] = *bp++; 5362 uval.bd[2] = *bp++; 5363 uval.bd[1] = *bp++; 5364 uval.bd[0] = *bp; 5365 #endif /* ! WORDS_BIGENDIAN */ 5366 return uval.fv; 5367 } 5368 5369 static double 5370 getdbl( 5371 u_char *bp 5372 ) 5373 { 5374 union uval uval; 5375 5376 #ifdef WORDS_BIGENDIAN 5377 uval.bd[0] = *bp++; 5378 uval.bd[1] = *bp++; 5379 uval.bd[2] = *bp++; 5380 uval.bd[3] = *bp++; 5381 uval.bd[4] = *bp++; 5382 uval.bd[5] = *bp++; 5383 uval.bd[6] = *bp++; 5384 uval.bd[7] = *bp; 5385 #else /* ! WORDS_BIGENDIAN */ 5386 uval.bd[7] = *bp++; 5387 uval.bd[6] = *bp++; 5388 uval.bd[5] = *bp++; 5389 uval.bd[4] = *bp++; 5390 uval.bd[3] = *bp++; 5391 uval.bd[2] = *bp++; 5392 uval.bd[1] = *bp++; 5393 uval.bd[0] = *bp; 5394 #endif /* ! WORDS_BIGENDIAN */ 5395 return uval.dv; 5396 } 5397 5398 static int 5399 getshort( 5400 unsigned char *p 5401 ) 5402 { 5403 return (int) get_msb_short(&p); 5404 } 5405 5406 /*-------------------------------------------------- 5407 * trimbletsip_message - process trimble messages 5408 */ 5409 #define RTOD (180.0 / 3.1415926535898) 5410 #define mb(_X_) (buffer[2+(_X_)]) /* shortcut for buffer access */ 5411 5412 static void 5413 trimbletsip_message( 5414 struct parseunit *parse, 5415 parsetime_t *parsetime 5416 ) 5417 { 5418 unsigned char *buffer = parsetime->parse_msg; 5419 unsigned int size = parsetime->parse_msglen; 5420 5421 if ((size < 4) || 5422 (buffer[0] != DLE) || 5423 (buffer[size-1] != ETX) || 5424 (buffer[size-2] != DLE)) 5425 { 5426 #ifdef DEBUG 5427 if (debug > 2) { 5428 size_t i; 5429 5430 printf("TRIMBLE BAD packet, size %d:\n ", size); 5431 for (i = 0; i < size; i++) { 5432 printf ("%2.2x, ", buffer[i]&0xff); 5433 if (i%16 == 15) printf("\n\t"); 5434 } 5435 printf("\n"); 5436 } 5437 #endif 5438 return; 5439 } 5440 else 5441 { 5442 u_short var_flag; 5443 trimble_t *tr = parse->localdata; 5444 unsigned int cmd = buffer[1]; 5445 char pbuffer[200]; 5446 char *t = pbuffer; 5447 cmd_info_t *s; 5448 5449 #ifdef DEBUG 5450 if (debug > 3) { 5451 size_t i; 5452 5453 printf("TRIMBLE packet 0x%02x, size %d:\n ", cmd, size); 5454 for (i = 0; i < size; i++) { 5455 printf ("%2.2x, ", buffer[i]&0xff); 5456 if (i%16 == 15) printf("\n\t"); 5457 } 5458 printf("\n"); 5459 } 5460 #endif 5461 5462 if (tr) 5463 tr->last_msg = current_time; 5464 5465 s = trimble_convert(cmd, trimble_rcmds); 5466 5467 if (s) 5468 { 5469 t = ap(pbuffer, sizeof(pbuffer), t, "%s=\"", s->varname); 5470 } 5471 else 5472 { 5473 DPRINTF(1, ("TRIMBLE UNKNOWN COMMAND 0x%02x\n", cmd)); 5474 return; 5475 } 5476 5477 var_flag = (u_short) s->varmode; 5478 5479 switch(cmd) 5480 { 5481 case CMD_RCURTIME: 5482 t = ap(pbuffer, sizeof(pbuffer), t, "%f, %d, %f", 5483 getflt((unsigned char *)&mb(0)), getshort((unsigned char *)&mb(4)), 5484 getflt((unsigned char *)&mb(6))); 5485 break; 5486 5487 case CMD_RBEST4: 5488 t = ap(pbuffer, sizeof(pbuffer), t, "mode: "); 5489 switch (mb(0) & 0xF) 5490 { 5491 default: 5492 t = ap(pbuffer, sizeof(pbuffer), t, 5493 "0x%x", mb(0) & 0x7); 5494 break; 5495 5496 case 1: 5497 t = ap(pbuffer, sizeof(pbuffer), t, "0D"); 5498 break; 5499 5500 case 3: 5501 t = ap(pbuffer, sizeof(pbuffer), t, "2D"); 5502 break; 5503 5504 case 4: 5505 t = ap(pbuffer, sizeof(pbuffer), t, "3D"); 5506 break; 5507 } 5508 if (mb(0) & 0x10) 5509 t = ap(pbuffer, sizeof(pbuffer), t, "-MANUAL, "); 5510 else 5511 t = ap(pbuffer, sizeof(pbuffer), t, "-AUTO, "); 5512 5513 t = ap(pbuffer, sizeof(pbuffer), t, "satellites %02d %02d %02d %02d, PDOP %.2f, HDOP %.2f, VDOP %.2f, TDOP %.2f", 5514 mb(1), mb(2), mb(3), mb(4), 5515 getflt((unsigned char *)&mb(5)), 5516 getflt((unsigned char *)&mb(9)), 5517 getflt((unsigned char *)&mb(13)), 5518 getflt((unsigned char *)&mb(17))); 5519 5520 break; 5521 5522 case CMD_RVERSION: 5523 t = ap(pbuffer, sizeof(pbuffer), t, "%d.%d (%d/%d/%d)", 5524 mb(0)&0xff, mb(1)&0xff, 1900+(mb(4)&0xff), mb(2)&0xff, mb(3)&0xff); 5525 break; 5526 5527 case CMD_RRECVHEALTH: 5528 { 5529 static const char *msgs[] = 5530 { 5531 "Battery backup failed", 5532 "Signal processor error", 5533 "Alignment error, channel or chip 1", 5534 "Alignment error, channel or chip 2", 5535 "Antenna feed line fault", 5536 "Excessive ref freq. error", 5537 "<BIT 6>", 5538 "<BIT 7>" 5539 }; 5540 5541 int i, bits; 5542 5543 switch (mb(0) & 0xFF) 5544 { 5545 default: 5546 t = ap(pbuffer, sizeof(pbuffer), t, "illegal value 0x%02x", mb(0) & 0xFF); 5547 break; 5548 case 0x00: 5549 t = ap(pbuffer, sizeof(pbuffer), t, "doing position fixes"); 5550 break; 5551 case 0x01: 5552 t = ap(pbuffer, sizeof(pbuffer), t, "no GPS time yet"); 5553 break; 5554 case 0x03: 5555 t = ap(pbuffer, sizeof(pbuffer), t, "PDOP too high"); 5556 break; 5557 case 0x08: 5558 t = ap(pbuffer, sizeof(pbuffer), t, "no usable satellites"); 5559 break; 5560 case 0x09: 5561 t = ap(pbuffer, sizeof(pbuffer), t, "only ONE usable satellite"); 5562 break; 5563 case 0x0A: 5564 t = ap(pbuffer, sizeof(pbuffer), t, "only TWO usable satellites"); 5565 break; 5566 case 0x0B: 5567 t = ap(pbuffer, sizeof(pbuffer), t, "only THREE usable satellites"); 5568 break; 5569 case 0x0C: 5570 t = ap(pbuffer, sizeof(pbuffer), t, "the chosen satellite is unusable"); 5571 break; 5572 } 5573 5574 bits = mb(1) & 0xFF; 5575 5576 for (i = 0; i < 8; i++) 5577 if (bits & (0x1<<i)) 5578 { 5579 t = ap(pbuffer, sizeof(pbuffer), t, ", %s", msgs[i]); 5580 } 5581 } 5582 break; 5583 5584 case CMD_RMESSAGE: 5585 mkreadable(t, (int)BUFFER_SIZE(pbuffer, t), (char *)&mb(0), (unsigned)(size - 2 - (&mb(0) - buffer)), 0); 5586 break; 5587 5588 case CMD_RMACHSTAT: 5589 { 5590 static const char *msgs[] = 5591 { 5592 "Synthesizer Fault", 5593 "Battery Powered Time Clock Fault", 5594 "A-to-D Converter Fault", 5595 "The almanac stored in the receiver is not complete and current", 5596 "<BIT 4>", 5597 "<BIT 5", 5598 "<BIT 6>", 5599 "<BIT 7>" 5600 }; 5601 5602 int i, bits; 5603 5604 t = ap(pbuffer, sizeof(pbuffer), t, "machine id 0x%02x", mb(0) & 0xFF); 5605 bits = mb(1) & 0xFF; 5606 5607 for (i = 0; i < 8; i++) 5608 if (bits & (0x1<<i)) 5609 { 5610 t = ap(pbuffer, sizeof(pbuffer), t, ", %s", msgs[i]); 5611 } 5612 5613 t = ap(pbuffer, sizeof(pbuffer), t, ", Superpackets %ssupported", (mb(2) & 0xFF) ? "" :"un" ); 5614 } 5615 break; 5616 5617 case CMD_ROPERPARAM: 5618 t = ap(pbuffer, sizeof(pbuffer), t, "%2x %.1f %.1f %.1f %.1f", 5619 mb(0), getflt((unsigned char *)&mb(1)), getflt((unsigned char *)&mb(5)), 5620 getflt((unsigned char *)&mb(9)), getflt((unsigned char *)&mb(13))); 5621 break; 5622 5623 case CMD_RUTCPARAM: 5624 { 5625 float t0t = getflt((unsigned char *)&mb(14)); 5626 short wnt = (short) getshort((unsigned char *)&mb(18)); 5627 short dtls = (short) getshort((unsigned char *)&mb(12)); 5628 short wnlsf = (short) getshort((unsigned char *)&mb(20)); 5629 short dn = (short) getshort((unsigned char *)&mb(22)); 5630 short dtlsf = (short) getshort((unsigned char *)&mb(24)); 5631 5632 if ((int)t0t != 0) 5633 { 5634 mk_utcinfo(t, wnt, wnlsf, dn, dtls, dtlsf, BUFFER_SIZE(pbuffer, t)); 5635 } 5636 else 5637 { 5638 t = ap(pbuffer, sizeof(pbuffer), t, "<NO UTC DATA>"); 5639 } 5640 } 5641 break; 5642 5643 case CMD_RSAT1BIAS: 5644 t = ap(pbuffer, sizeof(pbuffer), t, "%.1fm %.2fm/s at %.1fs", 5645 getflt(&mb(0)), getflt(&mb(4)), getflt(&mb(8))); 5646 break; 5647 5648 case CMD_RIOOPTIONS: 5649 { 5650 t = ap(pbuffer, sizeof(pbuffer), t, "%02x %02x %02x %02x", 5651 mb(0), mb(1), mb(2), mb(3)); 5652 if (mb(0) != TRIM_POS_OPT || 5653 mb(2) != TRIM_TIME_OPT) 5654 { 5655 (void)trimbletsip_setup(parse, "bad io options"); 5656 } 5657 } 5658 break; 5659 5660 case CMD_RSPOSXYZ: 5661 { 5662 double x = getflt((unsigned char *)&mb(0)); 5663 double y = getflt((unsigned char *)&mb(4)); 5664 double z = getflt((unsigned char *)&mb(8)); 5665 double f = getflt((unsigned char *)&mb(12)); 5666 5667 if (f > 0.0) 5668 t = ap(pbuffer, sizeof(pbuffer), t, "x= %.1fm, y= %.1fm, z= %.1fm, time_of_fix= %f sec", 5669 x, y, z, 5670 f); 5671 else 5672 return; 5673 } 5674 break; 5675 5676 case CMD_RSLLAPOS: 5677 { 5678 double lat = getflt((unsigned char *)&mb(0)); 5679 double lng = getflt((unsigned char *)&mb(4)); 5680 double f = getflt((unsigned char *)&mb(12)); 5681 5682 if (f > 0.0) 5683 t = ap(pbuffer, sizeof(pbuffer), t, "lat %f %c, long %f %c, alt %.2fm", 5684 ((lat < 0.0) ? (-lat) : (lat))*RTOD, (lat < 0.0 ? 'S' : 'N'), 5685 ((lng < 0.0) ? (-lng) : (lng))*RTOD, (lng < 0.0 ? 'W' : 'E'), 5686 getflt((unsigned char *)&mb(8))); 5687 else 5688 return; 5689 } 5690 break; 5691 5692 case CMD_RDOUBLEXYZ: 5693 { 5694 double x = getdbl((unsigned char *)&mb(0)); 5695 double y = getdbl((unsigned char *)&mb(8)); 5696 double z = getdbl((unsigned char *)&mb(16)); 5697 t = ap(pbuffer, sizeof(pbuffer), t, "x= %.1fm, y= %.1fm, z= %.1fm", 5698 x, y, z); 5699 } 5700 break; 5701 5702 case CMD_RDOUBLELLA: 5703 { 5704 double lat = getdbl((unsigned char *)&mb(0)); 5705 double lng = getdbl((unsigned char *)&mb(8)); 5706 t = ap(pbuffer, sizeof(pbuffer), t, "lat %f %c, lon %f %c, alt %.2fm", 5707 ((lat < 0.0) ? (-lat) : (lat))*RTOD, (lat < 0.0 ? 'S' : 'N'), 5708 ((lng < 0.0) ? (-lng) : (lng))*RTOD, (lng < 0.0 ? 'W' : 'E'), 5709 getdbl((unsigned char *)&mb(16))); 5710 } 5711 break; 5712 5713 case CMD_RALLINVIEW: 5714 { 5715 int i, sats; 5716 5717 t = ap(pbuffer, sizeof(pbuffer), t, "mode: "); 5718 switch (mb(0) & 0x7) 5719 { 5720 default: 5721 t = ap(pbuffer, sizeof(pbuffer), t, "0x%x", mb(0) & 0x7); 5722 break; 5723 5724 case 3: 5725 t = ap(pbuffer, sizeof(pbuffer), t, "2D"); 5726 break; 5727 5728 case 4: 5729 t = ap(pbuffer, sizeof(pbuffer), t, "3D"); 5730 break; 5731 } 5732 if (mb(0) & 0x8) 5733 t = ap(pbuffer, sizeof(pbuffer), t, "-MANUAL, "); 5734 else 5735 t = ap(pbuffer, sizeof(pbuffer), t, "-AUTO, "); 5736 5737 sats = (mb(0)>>4) & 0xF; 5738 5739 t = ap(pbuffer, sizeof(pbuffer), t, "PDOP %.2f, HDOP %.2f, VDOP %.2f, TDOP %.2f, %d satellite%s in view: ", 5740 getflt((unsigned char *)&mb(1)), 5741 getflt((unsigned char *)&mb(5)), 5742 getflt((unsigned char *)&mb(9)), 5743 getflt((unsigned char *)&mb(13)), 5744 sats, (sats == 1) ? "" : "s"); 5745 5746 for (i=0; i < sats; i++) 5747 { 5748 t = ap(pbuffer, sizeof(pbuffer), t, "%s%02d", i ? ", " : "", mb(17+i)); 5749 if (tr) 5750 tr->ctrack |= (1 << (mb(17+i)-1)); 5751 } 5752 5753 if (tr) 5754 { /* mark for tracking status query */ 5755 tr->qtracking = 1; 5756 } 5757 } 5758 break; 5759 5760 case CMD_RSTATTRACK: 5761 { 5762 t = ap(pbuffer, sizeof(pbuffer), t-2, "[%02d]=\"", mb(0)); /* add index to var name */ 5763 if (getflt((unsigned char *)&mb(4)) < 0.0) 5764 { 5765 t = ap(pbuffer, sizeof(pbuffer), t, "<NO MEASUREMENTS>"); 5766 var_flag &= (u_short)(~DEF); 5767 } 5768 else 5769 { 5770 t = ap(pbuffer, sizeof(pbuffer), t, "ch=%d, acq=%s, eph=%d, signal_level= %5.2f, elevation= %5.2f, azimuth= %6.2f", 5771 (mb(1) & 0xFF)>>3, 5772 mb(2) ? ((mb(2) == 1) ? "ACQ" : "SRCH") : "NEVER", 5773 mb(3), 5774 getflt((unsigned char *)&mb(4)), 5775 getflt((unsigned char *)&mb(12)) * RTOD, 5776 getflt((unsigned char *)&mb(16)) * RTOD); 5777 if (mb(20)) 5778 { 5779 var_flag &= (u_short)(~DEF); 5780 t = ap(pbuffer, sizeof(pbuffer), t, ", OLD"); 5781 } 5782 if (mb(22)) 5783 { 5784 if (mb(22) == 1) 5785 t = ap(pbuffer, sizeof(pbuffer), t, ", BAD PARITY"); 5786 else 5787 if (mb(22) == 2) 5788 t = ap(pbuffer, sizeof(pbuffer), t, ", BAD EPH HEALTH"); 5789 } 5790 if (mb(23)) 5791 t = ap(pbuffer, sizeof(pbuffer), t, ", collecting data"); 5792 } 5793 } 5794 break; 5795 5796 default: 5797 t = ap(pbuffer, sizeof(pbuffer), t, "<UNDECODED>"); 5798 break; 5799 } 5800 5801 t = ap(pbuffer, sizeof(pbuffer), t, "\""); 5802 set_var(&parse->kv, pbuffer, sizeof(pbuffer), var_flag); 5803 } 5804 } 5805 5806 5807 /**============================================================ 5808 ** RAWDCF support 5809 **/ 5810 5811 /*-------------------------------------------------- 5812 * rawdcf_init_1 - set up modem lines for RAWDCF receivers 5813 * SET DTR line 5814 */ 5815 #if defined(TIOCMSET) && (defined(TIOCM_DTR) || defined(CIOCM_DTR)) 5816 static int 5817 rawdcf_init_1( 5818 struct parseunit *parse 5819 ) 5820 { 5821 /* fixed 2000 for using with Linux by Wolfram Pienkoss <wp@bszh.de> */ 5822 /* 5823 * You can use the RS232 to supply the power for a DCF77 receiver. 5824 * Here a voltage between the DTR and the RTS line is used. Unfortunately 5825 * the name has changed from CIOCM_DTR to TIOCM_DTR recently. 5826 */ 5827 int sl232; 5828 5829 if (ioctl(parse->generic->io.fd, TIOCMGET, (caddr_t)&sl232) == -1) 5830 { 5831 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: ioctl(fd, TIOCMGET, [C|T]IOCM_DTR): %m", CLK_UNIT(parse->peer)); 5832 return 0; 5833 } 5834 5835 #ifdef TIOCM_DTR 5836 sl232 = (sl232 & ~TIOCM_RTS) | TIOCM_DTR; /* turn on DTR, clear RTS for power supply */ 5837 #else 5838 sl232 = (sl232 & ~CIOCM_RTS) | CIOCM_DTR; /* turn on DTR, clear RTS for power supply */ 5839 #endif 5840 5841 if (ioctl(parse->generic->io.fd, TIOCMSET, (caddr_t)&sl232) == -1) 5842 { 5843 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: ioctl(fd, TIOCMSET, [C|T]IOCM_DTR): %m", CLK_UNIT(parse->peer)); 5844 } 5845 return 0; 5846 } 5847 #else 5848 static int 5849 rawdcfdtr_init_1( 5850 struct parseunit *parse 5851 ) 5852 { 5853 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: OS interface incapable of setting DTR to power DCF modules", CLK_UNIT(parse->peer)); 5854 return 0; 5855 } 5856 #endif /* DTR initialisation type */ 5857 5858 /*-------------------------------------------------- 5859 * rawdcf_init_2 - set up modem lines for RAWDCF receivers 5860 * CLR DTR line, SET RTS line 5861 */ 5862 #if defined(TIOCMSET) && (defined(TIOCM_RTS) || defined(CIOCM_RTS)) 5863 static int 5864 rawdcf_init_2( 5865 struct parseunit *parse 5866 ) 5867 { 5868 /* fixed 2000 for using with Linux by Wolfram Pienkoss <wp@bszh.de> */ 5869 /* 5870 * You can use the RS232 to supply the power for a DCF77 receiver. 5871 * Here a voltage between the DTR and the RTS line is used. Unfortunately 5872 * the name has changed from CIOCM_DTR to TIOCM_DTR recently. 5873 */ 5874 int sl232; 5875 5876 if (ioctl(parse->generic->io.fd, TIOCMGET, (caddr_t)&sl232) == -1) 5877 { 5878 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: ioctl(fd, TIOCMGET, [C|T]IOCM_RTS): %m", CLK_UNIT(parse->peer)); 5879 return 0; 5880 } 5881 5882 #ifdef TIOCM_RTS 5883 sl232 = (sl232 & ~TIOCM_DTR) | TIOCM_RTS; /* turn on RTS, clear DTR for power supply */ 5884 #else 5885 sl232 = (sl232 & ~CIOCM_DTR) | CIOCM_RTS; /* turn on RTS, clear DTR for power supply */ 5886 #endif 5887 5888 if (ioctl(parse->generic->io.fd, TIOCMSET, (caddr_t)&sl232) == -1) 5889 { 5890 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: ioctl(fd, TIOCMSET, [C|T]IOCM_RTS): %m", CLK_UNIT(parse->peer)); 5891 } 5892 return 0; 5893 } 5894 #else 5895 static int 5896 rawdcf_init_2( 5897 struct parseunit *parse 5898 ) 5899 { 5900 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: OS interface incapable of setting RTS to power DCF modules", CLK_UNIT(parse->peer)); 5901 return 0; 5902 } 5903 #endif /* DTR initialisation type */ 5904 5905 #else /* defined(REFCLOCK) && defined(PARSE) */ 5906 NONEMPTY_TRANSLATION_UNIT 5907 #endif /* defined(REFCLOCK) && defined(PARSE) */ 5908 5909 /* 5910 * History: 5911 * 5912 * refclock_parse.c,v 5913 * Revision 4.81 2009/05/01 10:15:29 kardel 5914 * use new refclock_ppsapi interface 5915 * 5916 * Revision 4.80 2007/08/11 12:06:29 kardel 5917 * update comments wrt/ to PPS 5918 * 5919 * Revision 4.79 2007/08/11 11:52:23 kardel 5920 * - terminate io bindings before io_closeclock() will close our file descriptor 5921 * 5922 * Revision 4.78 2006/12/22 20:08:27 kardel 5923 * Bug 746 (RFE): add configuration for Expert mouseCLOCK USB v2.0 as mode 19 5924 * 5925 * Revision 4.77 2006/08/05 07:44:49 kardel 5926 * support optionally separate PPS devices via /dev/refclockpps-{0..3} 5927 * 5928 * Revision 4.76 2006/06/22 18:40:47 kardel 5929 * clean up signedness (gcc 4) 5930 * 5931 * Revision 4.75 2006/06/22 16:58:10 kardel 5932 * Bug #632: call parse_ppsapi() in parse_ctl() when updating 5933 * the PPS offset. Fix sign of offset passed to kernel. 5934 * 5935 * Revision 4.74 2006/06/18 21:18:37 kardel 5936 * NetBSD Coverity CID 3796: possible NULL deref 5937 * 5938 * Revision 4.73 2006/05/26 14:23:46 kardel 5939 * cleanup of copyright info 5940 * 5941 * Revision 4.72 2006/05/26 14:19:43 kardel 5942 * cleanup of ioctl cruft 5943 * 5944 * Revision 4.71 2006/05/26 14:15:57 kardel 5945 * delay adding refclock to async refclock io after all initializations 5946 * 5947 * Revision 4.70 2006/05/25 18:20:50 kardel 5948 * bug #619 5949 * terminate parse io engine after de-registering 5950 * from refclock io engine 5951 * 5952 * Revision 4.69 2006/05/25 17:28:02 kardel 5953 * complete refclock io structure initialization *before* inserting it into the 5954 * refclock input machine (avoids null pointer deref) (bug #619) 5955 * 5956 * Revision 4.68 2006/05/01 17:02:51 kardel 5957 * copy receiver method also for newlwy created receive buffers 5958 * 5959 * Revision 4.67 2006/05/01 14:37:29 kardel 5960 * If an input buffer parses into more than one message do insert the 5961 * parsed message in a new input buffer instead of processing it 5962 * directly. This avoids deed complicated processing in signal 5963 * handling. 5964 * 5965 * Revision 4.66 2006/03/18 00:45:30 kardel 5966 * coverity fixes found in NetBSD coverity scan 5967 * 5968 * Revision 4.65 2006/01/26 06:08:33 kardel 5969 * output errno on PPS setup failure 5970 * 5971 * Revision 4.64 2005/11/09 20:44:47 kardel 5972 * utilize full PPS timestamp resolution from PPS API 5973 * 5974 * Revision 4.63 2005/10/07 22:10:25 kardel 5975 * bounded buffer implementation 5976 * 5977 * Revision 4.62.2.2 2005/09/25 10:20:16 kardel 5978 * avoid unexpected buffer overflows due to sprintf("%f") on strange floats: 5979 * replace almost all str* and *printf functions be their buffer bounded 5980 * counterparts 5981 * 5982 * Revision 4.62.2.1 2005/08/27 16:19:27 kardel 5983 * limit re-set rate of trimble clocks 5984 * 5985 * Revision 4.62 2005/08/06 17:40:00 kardel 5986 * cleanup size handling wrt/ to buffer boundaries 5987 * 5988 * Revision 4.61 2005/07/27 21:16:19 kardel 5989 * fix a long (> 11 years) misconfiguration wrt/ Meinberg cflag factory 5990 * default setup. CSTOPB was missing for the 7E2 default data format of 5991 * the DCF77 clocks. 5992 * 5993 * Revision 4.60 2005/07/17 21:14:44 kardel 5994 * change contents of version string to include the RCS/CVS Id 5995 * 5996 * Revision 4.59 2005/07/06 06:56:38 kardel 5997 * syntax error 5998 * 5999 * Revision 4.58 2005/07/04 13:10:40 kardel 6000 * fix bug 455: tripping over NULL pointer on cleanup 6001 * fix shadow storage logic for ppsphaseadjust and trustime wrt/ time2 6002 * fix compiler warnings for some platforms wrt/ printf formatstrings and 6003 * varying structure element sizes 6004 * reorder assignment in binding to avoid tripping over NULL pointers 6005 * 6006 * Revision 4.57 2005/06/25 09:25:19 kardel 6007 * sort out log output sequence 6008 * 6009 * Revision 4.56 2005/06/14 21:47:27 kardel 6010 * collect samples only if samples are ok (sync or trusted flywheel) 6011 * propagate pps phase adjustment value to kernel via PPSAPI to help HARDPPS 6012 * en- and dis-able HARDPPS in correlation to receiver sync state 6013 * 6014 * Revision 4.55 2005/06/02 21:28:31 kardel 6015 * clarify trust logic 6016 * 6017 * Revision 4.54 2005/06/02 17:06:49 kardel 6018 * change status reporting to use fixed refclock_report() 6019 * 6020 * Revision 4.53 2005/06/02 16:33:31 kardel 6021 * fix acceptance of clocks unsync clocks right at start 6022 * 6023 * Revision 4.52 2005/05/26 21:55:06 kardel 6024 * cleanup status reporting 6025 * 6026 * Revision 4.51 2005/05/26 19:19:14 kardel 6027 * implement fast refclock startup 6028 * 6029 * Revision 4.50 2005/04/16 20:51:35 kardel 6030 * set hardpps_enable = 1 when binding a kernel PPS source 6031 * 6032 * Revision 4.49 2005/04/16 17:29:26 kardel 6033 * add non polling clock type 18 for just listenning to Meinberg clocks 6034 * 6035 * Revision 4.48 2005/04/16 16:22:27 kardel 6036 * bk sync 20050415 ntp-dev 6037 * 6038 * Revision 4.47 2004/11/29 10:42:48 kardel 6039 * bk sync ntp-dev 20041129 6040 * 6041 * Revision 4.46 2004/11/29 10:26:29 kardel 6042 * keep fudgetime2 in sync with trusttime/ppsphaseadjust depending in flag1 6043 * 6044 * Revision 4.45 2004/11/14 20:53:20 kardel 6045 * clear PPS flags after using them 6046 * 6047 * Revision 4.44 2004/11/14 15:29:41 kardel 6048 * support PPSAPI, upgrade Copyright to Berkeley style 6049 * 6050 * Revision 4.43 2001/05/26 22:53:16 kardel 6051 * 20010526 reconcilation 6052 * 6053 * Revision 4.42 2000/05/14 15:31:51 kardel 6054 * PPSAPI && RAWDCF modemline support 6055 * 6056 * Revision 4.41 2000/04/09 19:50:45 kardel 6057 * fixed rawdcfdtr_init() -> rawdcf_init_1 6058 * 6059 * Revision 4.40 2000/04/09 15:27:55 kardel 6060 * modem line fiddle in rawdcf_init_2 6061 * 6062 * Revision 4.39 2000/03/18 09:16:55 kardel 6063 * PPSAPI integration 6064 * 6065 * Revision 4.38 2000/03/05 20:25:06 kardel 6066 * support PPSAPI 6067 * 6068 * Revision 4.37 2000/03/05 20:11:14 kardel 6069 * 4.0.99g reconcilation 6070 * 6071 * Revision 4.36 1999/11/28 17:18:20 kardel 6072 * disabled burst mode 6073 * 6074 * Revision 4.35 1999/11/28 09:14:14 kardel 6075 * RECON_4_0_98F 6076 * 6077 * Revision 4.34 1999/05/14 06:08:05 kardel 6078 * store current_time in a suitable container (u_long) 6079 * 6080 * Revision 4.33 1999/05/13 21:48:38 kardel 6081 * double the no response timeout interval 6082 * 6083 * Revision 4.32 1999/05/13 20:09:13 kardel 6084 * complain only about missing polls after a full poll interval 6085 * 6086 * Revision 4.31 1999/05/13 19:59:32 kardel 6087 * add clock type 16 for RTS set DTR clr in RAWDCF 6088 * 6089 * Revision 4.30 1999/02/28 20:36:43 kardel 6090 * fixed printf fmt 6091 * 6092 * Revision 4.29 1999/02/28 19:58:23 kardel 6093 * updated copyright information 6094 * 6095 * Revision 4.28 1999/02/28 19:01:50 kardel 6096 * improved debug out on sent Meinberg messages 6097 * 6098 * Revision 4.27 1999/02/28 18:05:55 kardel 6099 * no linux/ppsclock.h stuff 6100 * 6101 * Revision 4.26 1999/02/28 15:27:27 kardel 6102 * wharton clock integration 6103 * 6104 * Revision 4.25 1999/02/28 14:04:46 kardel 6105 * added missing double quotes to UTC information string 6106 * 6107 * Revision 4.24 1999/02/28 12:06:50 kardel 6108 * (parse_control): using gmprettydate instead of prettydate() 6109 * (mk_utcinfo): new function for formatting GPS derived UTC information 6110 * (gps16x_message): changed to use mk_utcinfo() 6111 * (trimbletsip_message): changed to use mk_utcinfo() 6112 * ignoring position information in unsynchronized mode 6113 * (parse_start): augument linux support for optional ASYNC_LOW_LATENCY 6114 * 6115 * Revision 4.23 1999/02/23 19:47:53 kardel 6116 * fixed #endifs 6117 * (stream_receive): fixed formats 6118 * 6119 * Revision 4.22 1999/02/22 06:21:02 kardel 6120 * use new autoconfig symbols 6121 * 6122 * Revision 4.21 1999/02/21 12:18:13 kardel 6123 * 4.91f reconcilation 6124 * 6125 * Revision 4.20 1999/02/21 10:53:36 kardel 6126 * initial Linux PPSkit version 6127 * 6128 * Revision 4.19 1999/02/07 09:10:45 kardel 6129 * clarify STREAMS mitigation rules in comment 6130 * 6131 * Revision 4.18 1998/12/20 23:45:34 kardel 6132 * fix types and warnings 6133 * 6134 * Revision 4.17 1998/11/15 21:24:51 kardel 6135 * cannot access mbg_ routines when CLOCK_MEINBERG 6136 * is not defined 6137 * 6138 * Revision 4.16 1998/11/15 20:28:17 kardel 6139 * Release 4.0.73e13 reconcilation 6140 * 6141 * Revision 4.15 1998/08/22 21:56:08 kardel 6142 * fixed IO handling for non-STREAM IO 6143 * 6144 * Revision 4.14 1998/08/16 19:00:48 kardel 6145 * (gps16x_message): reduced UTC parameter information (dropped A0,A1) 6146 * made uval a local variable (killed one of the last globals) 6147 * (sendetx): added logging of messages when in debug mode 6148 * (trimble_check): added periodic checks to facilitate re-initialization 6149 * (trimbletsip_init): made use of EOL character if in non-kernel operation 6150 * (trimbletsip_message): extended message interpretation 6151 * (getdbl): fixed data conversion 6152 * 6153 * Revision 4.13 1998/08/09 22:29:13 kardel 6154 * Trimble TSIP support 6155 * 6156 * Revision 4.12 1998/07/11 10:05:34 kardel 6157 * Release 4.0.73d reconcilation 6158 * 6159 * Revision 4.11 1998/06/14 21:09:42 kardel 6160 * Sun acc cleanup 6161 * 6162 * Revision 4.10 1998/06/13 12:36:45 kardel 6163 * signed/unsigned, name clashes 6164 * 6165 * Revision 4.9 1998/06/12 15:30:00 kardel 6166 * prototype fixes 6167 * 6168 * Revision 4.8 1998/06/12 11:19:42 kardel 6169 * added direct input processing routine for refclocks in 6170 * order to avaiod that single character io gobbles up all 6171 * receive buffers and drops input data. (Problem started 6172 * with fast machines so a character a buffer was possible 6173 * one of the few cases where faster machines break existing 6174 * allocation algorithms) 6175 * 6176 * Revision 4.7 1998/06/06 18:35:20 kardel 6177 * (parse_start): added BURST mode initialisation 6178 * 6179 * Revision 4.6 1998/05/27 06:12:46 kardel 6180 * RAWDCF_BASEDELAY default added 6181 * old comment removed 6182 * casts for ioctl() 6183 * 6184 * Revision 4.5 1998/05/25 22:05:09 kardel 6185 * RAWDCF_SETDTR option removed 6186 * clock type 14 attempts to set DTR for 6187 * power supply of RAWDCF receivers 6188 * 6189 * Revision 4.4 1998/05/24 16:20:47 kardel 6190 * updated comments referencing Meinberg clocks 6191 * added RAWDCF clock with DTR set option as type 14 6192 * 6193 * Revision 4.3 1998/05/24 10:48:33 kardel 6194 * calibrated CONRAD RAWDCF default fudge factor 6195 * 6196 * Revision 4.2 1998/05/24 09:59:35 kardel 6197 * corrected version information (ntpq support) 6198 * 6199 * Revision 4.1 1998/05/24 09:52:31 kardel 6200 * use fixed format only (new IO model) 6201 * output debug to stdout instead of msyslog() 6202 * don't include >"< in ASCII output in order not to confuse 6203 * ntpq parsing 6204 * 6205 * Revision 4.0 1998/04/10 19:52:11 kardel 6206 * Start 4.0 release version numbering 6207 * 6208 * Revision 1.2 1998/04/10 19:28:04 kardel 6209 * initial NTP VERSION 4 integration of PARSE with GPS166 binary support 6210 * derived from 3.105.1.2 from V3 tree 6211 * 6212 * Revision information 3.1 - 3.105 from log deleted 1998/04/10 kardel 6213 * 6214 */ 6215