1 /* 2 * refclock_dumbclock - clock driver for a unknown time distribution system 3 * that only provides hh:mm:ss (in local time, yet!). 4 */ 5 6 /* 7 * Must interpolate back to local time. Very annoying. 8 */ 9 #define GET_LOCALTIME 10 11 #ifdef HAVE_CONFIG_H 12 #include <config.h> 13 #endif 14 15 #if defined(REFCLOCK) && defined(CLOCK_DUMBCLOCK) 16 17 #include "ntpd.h" 18 #include "ntp_io.h" 19 #include "ntp_refclock.h" 20 #include "ntp_calendar.h" 21 #include "ntp_stdlib.h" 22 23 #include <stdio.h> 24 #include <ctype.h> 25 26 /* 27 * This driver supports a generic dumb clock that only outputs hh:mm:ss, 28 * in local time, no less. 29 * 30 * Input format: 31 * 32 * hh:mm:ss <cr> 33 * 34 * hh:mm:ss -- what you'd expect, with a 24 hour clock. (Heck, that's the only 35 * way it could get stupider.) We take time on the <cr>. 36 * 37 * The original source of this module was the WWVB module. 38 */ 39 40 /* 41 * Interface definitions 42 */ 43 #define DEVICE "/dev/dumbclock%d" /* device name and unit */ 44 #define SPEED232 B9600 /* uart speed (9600 baud) */ 45 #define PRECISION (-13) /* precision assumed (about 100 us) */ 46 #define REFID "dumbclock" /* reference ID */ 47 #define DESCRIPTION "Dumb clock" /* WRU */ 48 49 50 /* 51 * Insanity check. Since the time is local, we need to make sure that during midnight 52 * transitions, we can convert back to Unix time. If the conversion results in some number 53 * worse than this number of seconds away, assume the next day and retry. 54 */ 55 #define INSANE_SECONDS 3600 56 57 /* 58 * Dumb clock control structure 59 */ 60 struct dumbclock_unit { 61 u_char tcswitch; /* timecode switch */ 62 l_fp laststamp; /* last receive timestamp */ 63 u_char lasthour; /* last hour (for monitor) */ 64 u_char linect; /* count ignored lines (for monitor */ 65 struct tm ymd; /* struct tm for y/m/d only */ 66 }; 67 68 /* 69 * Function prototypes 70 */ 71 static int dumbclock_start (int, struct peer *); 72 static void dumbclock_shutdown (int, struct peer *); 73 static void dumbclock_receive (struct recvbuf *); 74 #if 0 75 static void dumbclock_poll (int, struct peer *); 76 #endif 77 78 /* 79 * Transfer vector 80 */ 81 struct refclock refclock_dumbclock = { 82 dumbclock_start, /* start up driver */ 83 dumbclock_shutdown, /* shut down driver */ 84 noentry, /* poll the driver -- a nice fabrication */ 85 noentry, /* not used */ 86 noentry, /* not used */ 87 noentry, /* not used */ 88 NOFLAGS /* not used */ 89 }; 90 91 92 /* 93 * dumbclock_start - open the devices and initialize data for processing 94 */ 95 static int 96 dumbclock_start( 97 int unit, 98 struct peer *peer 99 ) 100 { 101 register struct dumbclock_unit *up; 102 struct refclockproc *pp; 103 int fd; 104 char device[20]; 105 struct tm *tm_time_p; 106 time_t now; 107 108 /* 109 * Open serial port. Don't bother with CLK line discipline, since 110 * it's not available. 111 */ 112 snprintf(device, sizeof(device), DEVICE, unit); 113 #ifdef DEBUG 114 if (debug) 115 printf ("starting Dumbclock with device %s\n",device); 116 #endif 117 fd = refclock_open(&peer->srcadr, device, SPEED232, 0); 118 if (fd <= 0) 119 return (0); 120 121 /* 122 * Allocate and initialize unit structure 123 */ 124 up = emalloc_zero(sizeof(*up)); 125 pp = peer->procptr; 126 pp->unitptr = up; 127 pp->io.clock_recv = dumbclock_receive; 128 pp->io.srcclock = peer; 129 pp->io.datalen = 0; 130 pp->io.fd = fd; 131 if (!io_addclock(&pp->io)) { 132 close(fd); 133 pp->io.fd = -1; 134 free(up); 135 pp->unitptr = NULL; 136 return (0); 137 } 138 139 140 time(&now); 141 #ifdef GET_LOCALTIME 142 tm_time_p = localtime(&now); 143 #else 144 tm_time_p = gmtime(&now); 145 #endif 146 if (tm_time_p) 147 up->ymd = *tm_time_p; 148 else 149 return 0; 150 151 /* 152 * Initialize miscellaneous variables 153 */ 154 peer->precision = PRECISION; 155 pp->clockdesc = DESCRIPTION; 156 memcpy((char *)&pp->refid, REFID, 4); 157 return (1); 158 } 159 160 161 /* 162 * dumbclock_shutdown - shut down the clock 163 */ 164 static void 165 dumbclock_shutdown( 166 int unit, 167 struct peer *peer 168 ) 169 { 170 register struct dumbclock_unit *up; 171 struct refclockproc *pp; 172 173 pp = peer->procptr; 174 up = pp->unitptr; 175 if (-1 != pp->io.fd) 176 io_closeclock(&pp->io); 177 if (NULL != up) 178 free(up); 179 } 180 181 182 /* 183 * dumbclock_receive - receive data from the serial interface 184 */ 185 static void 186 dumbclock_receive( 187 struct recvbuf *rbufp 188 ) 189 { 190 struct dumbclock_unit *up; 191 struct refclockproc *pp; 192 struct peer *peer; 193 194 l_fp trtmp; /* arrival timestamp */ 195 int hours; /* hour-of-day */ 196 int minutes; /* minutes-past-the-hour */ 197 int seconds; /* seconds */ 198 int temp; /* int temp */ 199 int got_good; /* got a good time flag */ 200 201 /* 202 * Initialize pointers and read the timecode and timestamp 203 */ 204 peer = rbufp->recv_peer; 205 pp = peer->procptr; 206 up = pp->unitptr; 207 temp = refclock_gtlin(rbufp, pp->a_lastcode, BMAX, &trtmp); 208 209 if (temp == 0) { 210 if (up->tcswitch == 0) { 211 up->tcswitch = 1; 212 up->laststamp = trtmp; 213 } else 214 up->tcswitch = 0; 215 return; 216 } 217 pp->lencode = (u_short)temp; 218 pp->lastrec = up->laststamp; 219 up->laststamp = trtmp; 220 up->tcswitch = 1; 221 222 #ifdef DEBUG 223 if (debug) 224 printf("dumbclock: timecode %d %s\n", 225 pp->lencode, pp->a_lastcode); 226 #endif 227 228 /* 229 * We get down to business. Check the timecode format... 230 */ 231 got_good=0; 232 if (sscanf(pp->a_lastcode,"%02d:%02d:%02d", 233 &hours,&minutes,&seconds) == 3) 234 { 235 struct tm *gmtp; 236 struct tm *lt_p; 237 time_t asserted_time; /* the SPM time based on the composite time+date */ 238 struct tm asserted_tm; /* the struct tm of the same */ 239 int adjyear; 240 int adjmon; 241 time_t reality_delta; 242 time_t now; 243 244 245 /* 246 * Convert to GMT for sites that distribute localtime. This 247 * means we have to figure out what day it is. Easier said 248 * than done... 249 */ 250 251 memset(&asserted_tm, 0, sizeof(asserted_tm)); 252 253 asserted_tm.tm_year = up->ymd.tm_year; 254 asserted_tm.tm_mon = up->ymd.tm_mon; 255 asserted_tm.tm_mday = up->ymd.tm_mday; 256 asserted_tm.tm_hour = hours; 257 asserted_tm.tm_min = minutes; 258 asserted_tm.tm_sec = seconds; 259 asserted_tm.tm_isdst = -1; 260 261 #ifdef GET_LOCALTIME 262 asserted_time = mktime (&asserted_tm); 263 time(&now); 264 #else 265 #include "GMT unsupported for dumbclock!" 266 #endif 267 reality_delta = asserted_time - now; 268 269 /* 270 * We assume that if the time is grossly wrong, it's because we got the 271 * year/month/day wrong. 272 */ 273 if (reality_delta > INSANE_SECONDS) 274 { 275 asserted_time -= SECSPERDAY; /* local clock behind real time */ 276 } 277 else if (-reality_delta > INSANE_SECONDS) 278 { 279 asserted_time += SECSPERDAY; /* local clock ahead of real time */ 280 } 281 lt_p = localtime(&asserted_time); 282 if (lt_p) 283 { 284 up->ymd = *lt_p; 285 } 286 else 287 { 288 refclock_report (peer, CEVNT_FAULT); 289 return; 290 } 291 292 if ((gmtp = gmtime (&asserted_time)) == NULL) 293 { 294 refclock_report (peer, CEVNT_FAULT); 295 return; 296 } 297 adjyear = gmtp->tm_year+1900; 298 adjmon = gmtp->tm_mon+1; 299 pp->day = ymd2yd (adjyear, adjmon, gmtp->tm_mday); 300 pp->hour = gmtp->tm_hour; 301 pp->minute = gmtp->tm_min; 302 pp->second = gmtp->tm_sec; 303 #ifdef DEBUG 304 if (debug) 305 printf ("time is %04d/%02d/%02d %02d:%02d:%02d UTC\n", 306 adjyear,adjmon,gmtp->tm_mday,pp->hour,pp->minute, 307 pp->second); 308 #endif 309 310 got_good=1; 311 } 312 313 if (!got_good) 314 { 315 if (up->linect > 0) 316 up->linect--; 317 else 318 refclock_report(peer, CEVNT_BADREPLY); 319 return; 320 } 321 322 /* 323 * Process the new sample in the median filter and determine the 324 * timecode timestamp. 325 */ 326 if (!refclock_process(pp)) { 327 refclock_report(peer, CEVNT_BADTIME); 328 return; 329 } 330 pp->lastref = pp->lastrec; 331 refclock_receive(peer); 332 record_clock_stats(&peer->srcadr, pp->a_lastcode); 333 up->lasthour = (u_char)pp->hour; 334 } 335 336 #if 0 337 /* 338 * dumbclock_poll - called by the transmit procedure 339 */ 340 static void 341 dumbclock_poll( 342 int unit, 343 struct peer *peer 344 ) 345 { 346 register struct dumbclock_unit *up; 347 struct refclockproc *pp; 348 char pollchar; 349 350 /* 351 * Time to poll the clock. The Chrono-log clock is supposed to 352 * respond to a 'T' by returning a timecode in the format(s) 353 * specified above. Ours does (can?) not, but this seems to be 354 * an installation-specific problem. This code is dyked out, 355 * but may be re-enabled if anyone ever finds a Chrono-log that 356 * actually listens to this command. 357 */ 358 #if 0 359 pp = peer->procptr; 360 up = pp->unitptr; 361 if (peer->reach == 0) 362 refclock_report(peer, CEVNT_TIMEOUT); 363 if (up->linect > 0) 364 pollchar = 'R'; 365 else 366 pollchar = 'T'; 367 if (refclock_fdwrite(peer, pp->io.fd, &pollchar, 1) != 1) 368 refclock_report(peer, CEVNT_FAULT); 369 else 370 pp->polls++; 371 #endif 372 } 373 #endif 374 375 #else 376 int refclock_dumbclock_bs; 377 #endif /* defined(REFCLOCK) && defined(CLOCK_DUMBCLOCK) */ 378