xref: /freebsd/contrib/ntp/libparse/clk_rawdcf.c (revision cc16dea626cf2fc80cde667ac4798065108e596c)
1 /*
2  * /src/NTP/REPOSITORY/ntp4-dev/libparse/clk_rawdcf.c,v 4.18 2006/06/22 18:40:01 kardel RELEASE_20060622_A
3  *
4  * clk_rawdcf.c,v 4.18 2006/06/22 18:40:01 kardel RELEASE_20060622_A
5  *
6  * Raw DCF77 pulse clock support
7  *
8  * Copyright (c) 1995-2006 by Frank Kardel <kardel <AT> ntp.org>
9  * Copyright (c) 1989-1994 by Frank Kardel, Friedrich-Alexander Universit�t Erlangen-N�rnberg, Germany
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions and the following disclaimer.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  * 3. Neither the name of the author nor the names of its contributors
20  *    may be used to endorse or promote products derived from this software
21  *    without specific prior written permission.
22  *
23  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
24  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
27  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33  * SUCH DAMAGE.
34  *
35  */
36 
37 #ifdef HAVE_CONFIG_H
38 # include <config.h>
39 #endif
40 
41 #if defined(REFCLOCK) && defined(CLOCK_PARSE) && defined(CLOCK_RAWDCF)
42 
43 #include "ntp_fp.h"
44 #include "ntp_unixtime.h"
45 #include "ntp_calendar.h"
46 
47 #include "parse.h"
48 #ifdef PARSESTREAM
49 # include <sys/parsestreams.h>
50 #endif
51 
52 #ifndef PARSEKERNEL
53 # include "ntp_stdlib.h"
54 #endif
55 
56 /*
57  * DCF77 raw time code
58  *
59  * From "Zur Zeit", Physikalisch-Technische Bundesanstalt (PTB), Braunschweig
60  * und Berlin, Maerz 1989
61  *
62  * Timecode transmission:
63  * AM:
64  *	time marks are send every second except for the second before the
65  *	next minute mark
66  *	time marks consist of a reduction of transmitter power to 25%
67  *	of the nominal level
68  *	the falling edge is the time indication (on time)
69  *	time marks of a 100ms duration constitute a logical 0
70  *	time marks of a 200ms duration constitute a logical 1
71  * FM:
72  *	see the spec. (basically a (non-)inverted psuedo random phase shift)
73  *
74  * Encoding:
75  * Second	Contents
76  * 0  - 10	AM: free, FM: 0
77  * 11 - 14	free
78  * 15		R     - alternate antenna
79  * 16		A1    - expect zone change (1 hour before)
80  * 17 - 18	Z1,Z2 - time zone
81  *		 0  0 illegal
82  *		 0  1 MEZ  (MET)
83  *		 1  0 MESZ (MED, MET DST)
84  *		 1  1 illegal
85  * 19		A2    - expect leap insertion/deletion (1 hour before)
86  * 20		S     - start of time code (1)
87  * 21 - 24	M1    - BCD (lsb first) Minutes
88  * 25 - 27	M10   - BCD (lsb first) 10 Minutes
89  * 28		P1    - Minute Parity (even)
90  * 29 - 32	H1    - BCD (lsb first) Hours
91  * 33 - 34      H10   - BCD (lsb first) 10 Hours
92  * 35		P2    - Hour Parity (even)
93  * 36 - 39	D1    - BCD (lsb first) Days
94  * 40 - 41	D10   - BCD (lsb first) 10 Days
95  * 42 - 44	DW    - BCD (lsb first) day of week (1: Monday -> 7: Sunday)
96  * 45 - 49	MO    - BCD (lsb first) Month
97  * 50           MO0   - 10 Months
98  * 51 - 53	Y1    - BCD (lsb first) Years
99  * 54 - 57	Y10   - BCD (lsb first) 10 Years
100  * 58 		P3    - Date Parity (even)
101  * 59		      - usually missing (minute indication), except for leap insertion
102  */
103 
104 static u_long pps_rawdcf P((parse_t *, int, timestamp_t *));
105 static u_long cvt_rawdcf P((unsigned char *, int, struct format *, clocktime_t *, void *));
106 static u_long inp_rawdcf P((parse_t *, unsigned int, timestamp_t  *));
107 
108 typedef struct last_tcode {
109 	time_t tcode;	/* last converted time code */
110 } last_tcode_t;
111 
112 #define BUFFER_MAX	61
113 
114 clockformat_t clock_rawdcf =
115 {
116   inp_rawdcf,			/* DCF77 input handling */
117   cvt_rawdcf,			/* raw dcf input conversion */
118   pps_rawdcf,			/* examining PPS information */
119   0,				/* no private configuration data */
120   "RAW DCF77 Timecode",		/* direct decoding / time synthesis */
121 
122   BUFFER_MAX,			/* bit buffer */
123   sizeof(last_tcode_t)
124 };
125 
126 static struct dcfparam
127 {
128 	unsigned char *onebits;
129 	unsigned char *zerobits;
130 } dcfparameter =
131 {
132 	(unsigned char *)"###############RADMLS1248124P124812P1248121241248112481248P??", /* 'ONE' representation */
133 	(unsigned char *)"--------------------s-------p------p----------------------p__"  /* 'ZERO' representation */
134 };
135 
136 static struct rawdcfcode
137 {
138 	char offset;			/* start bit */
139 } rawdcfcode[] =
140 {
141 	{  0 }, { 15 }, { 16 }, { 17 }, { 19 }, { 20 }, { 21 }, { 25 }, { 28 }, { 29 },
142 	{ 33 }, { 35 }, { 36 }, { 40 }, { 42 }, { 45 }, { 49 }, { 50 }, { 54 }, { 58 }, { 59 }
143 };
144 
145 #define DCF_M	0
146 #define DCF_R	1
147 #define DCF_A1	2
148 #define DCF_Z	3
149 #define DCF_A2	4
150 #define DCF_S	5
151 #define DCF_M1	6
152 #define DCF_M10	7
153 #define DCF_P1	8
154 #define DCF_H1	9
155 #define DCF_H10	10
156 #define DCF_P2	11
157 #define DCF_D1	12
158 #define DCF_D10	13
159 #define DCF_DW	14
160 #define DCF_MO	15
161 #define DCF_MO0	16
162 #define DCF_Y1	17
163 #define DCF_Y10	18
164 #define DCF_P3	19
165 
166 static struct partab
167 {
168 	char offset;			/* start bit of parity field */
169 } partab[] =
170 {
171 	{ 21 }, { 29 }, { 36 }, { 59 }
172 };
173 
174 #define DCF_P_P1	0
175 #define DCF_P_P2	1
176 #define DCF_P_P3	2
177 
178 #define DCF_Z_MET 0x2
179 #define DCF_Z_MED 0x1
180 
181 static u_long
182 ext_bf(
183 	unsigned char *buf,
184 	int   idx,
185 	unsigned char *zero
186 	)
187 {
188 	u_long sum = 0;
189 	int i, first;
190 
191 	first = rawdcfcode[idx].offset;
192 
193 	for (i = rawdcfcode[idx+1].offset - 1; i >= first; i--)
194 	{
195 		sum <<= 1;
196 		sum |= (buf[i] != zero[i]);
197 	}
198 	return sum;
199 }
200 
201 static unsigned
202 pcheck(
203        unsigned char *buf,
204        int   idx,
205        unsigned char *zero
206        )
207 {
208 	int i,last;
209 	unsigned psum = 1;
210 
211 	last = partab[idx+1].offset;
212 
213 	for (i = partab[idx].offset; i < last; i++)
214 	    psum ^= (buf[i] != zero[i]);
215 
216 	return psum;
217 }
218 
219 static u_long
220 convert_rawdcf(
221 	       unsigned char   *buffer,
222 	       int              size,
223 	       struct dcfparam *dcfprm,
224 	       clocktime_t     *clock_time
225 	       )
226 {
227 	unsigned char *s = buffer;
228 	unsigned char *b = dcfprm->onebits;
229 	unsigned char *c = dcfprm->zerobits;
230 	int i;
231 
232 	parseprintf(DD_RAWDCF,("parse: convert_rawdcf: \"%s\"\n", buffer));
233 
234 	if (size < 57)
235 	{
236 #ifndef PARSEKERNEL
237 		msyslog(LOG_ERR, "parse: convert_rawdcf: INCOMPLETE DATA - time code only has %d bits\n", size);
238 #endif
239 		return CVT_NONE;
240 	}
241 
242 	for (i = 0; i < size; i++)
243 	{
244 		if ((*s != *b) && (*s != *c))
245 		{
246 			/*
247 			 * we only have two types of bytes (ones and zeros)
248 			 */
249 #ifndef PARSEKERNEL
250 			msyslog(LOG_ERR, "parse: convert_rawdcf: BAD DATA - no conversion");
251 #endif
252 			return CVT_NONE;
253 		}
254 		if (*b) b++;
255 		if (*c) c++;
256 		s++;
257 	}
258 
259 	/*
260 	 * check Start and Parity bits
261 	 */
262 	if ((ext_bf(buffer, DCF_S, dcfprm->zerobits) == 1) &&
263 	    pcheck(buffer, DCF_P_P1, dcfprm->zerobits) &&
264 	    pcheck(buffer, DCF_P_P2, dcfprm->zerobits) &&
265 	    pcheck(buffer, DCF_P_P3, dcfprm->zerobits))
266 	{
267 		/*
268 		 * buffer OK
269 		 */
270 		parseprintf(DD_RAWDCF,("parse: convert_rawdcf: parity check passed\n"));
271 
272 		clock_time->flags  = PARSEB_S_ANTENNA|PARSEB_S_LEAP;
273 		clock_time->utctime= 0;
274 		clock_time->usecond= 0;
275 		clock_time->second = 0;
276 		clock_time->minute = ext_bf(buffer, DCF_M10, dcfprm->zerobits);
277 		clock_time->minute = TIMES10(clock_time->minute) + ext_bf(buffer, DCF_M1, dcfprm->zerobits);
278 		clock_time->hour   = ext_bf(buffer, DCF_H10, dcfprm->zerobits);
279 		clock_time->hour   = TIMES10(clock_time->hour) + ext_bf(buffer, DCF_H1, dcfprm->zerobits);
280 		clock_time->day    = ext_bf(buffer, DCF_D10, dcfprm->zerobits);
281 		clock_time->day    = TIMES10(clock_time->day) + ext_bf(buffer, DCF_D1, dcfprm->zerobits);
282 		clock_time->month  = ext_bf(buffer, DCF_MO0, dcfprm->zerobits);
283 		clock_time->month  = TIMES10(clock_time->month) + ext_bf(buffer, DCF_MO, dcfprm->zerobits);
284 		clock_time->year   = ext_bf(buffer, DCF_Y10, dcfprm->zerobits);
285 		clock_time->year   = TIMES10(clock_time->year) + ext_bf(buffer, DCF_Y1, dcfprm->zerobits);
286 
287 		switch (ext_bf(buffer, DCF_Z, dcfprm->zerobits))
288 		{
289 		    case DCF_Z_MET:
290 			clock_time->utcoffset = -1*60*60;
291 			break;
292 
293 		    case DCF_Z_MED:
294 			clock_time->flags     |= PARSEB_DST;
295 			clock_time->utcoffset  = -2*60*60;
296 			break;
297 
298 		    default:
299 			parseprintf(DD_RAWDCF,("parse: convert_rawdcf: BAD TIME ZONE\n"));
300 			return CVT_FAIL|CVT_BADFMT;
301 		}
302 
303 		if (ext_bf(buffer, DCF_A1, dcfprm->zerobits))
304 		    clock_time->flags |= PARSEB_ANNOUNCE;
305 
306 		if (ext_bf(buffer, DCF_A2, dcfprm->zerobits))
307 		    clock_time->flags |= PARSEB_LEAPADD; /* default: DCF77 data format deficiency */
308 
309 		if (ext_bf(buffer, DCF_R, dcfprm->zerobits))
310 		    clock_time->flags |= PARSEB_ALTERNATE;
311 
312 		parseprintf(DD_RAWDCF,("parse: convert_rawdcf: TIME CODE OK: %d:%d, %d.%d.%d, flags 0x%lx\n",
313 				       (int)clock_time->hour, (int)clock_time->minute, (int)clock_time->day, (int)clock_time->month,(int) clock_time->year,
314 				       (u_long)clock_time->flags));
315 		return CVT_OK;
316 	}
317 	else
318 	{
319 		/*
320 		 * bad format - not for us
321 		 */
322 #ifndef PARSEKERNEL
323 		msyslog(LOG_ERR, "parse: convert_rawdcf: parity check FAILED for \"%s\"\n", buffer);
324 #endif
325 		return CVT_FAIL|CVT_BADFMT;
326 	}
327 }
328 
329 /*
330  * raw dcf input routine - needs to fix up 50 baud
331  * characters for 1/0 decision
332  */
333 static u_long
334 cvt_rawdcf(
335 	   unsigned char   *buffer,
336 	   int              size,
337 	   struct format   *param,
338 	   clocktime_t     *clock_time,
339 	   void            *local
340 	   )
341 {
342 	last_tcode_t  *t = (last_tcode_t *)local;
343 	unsigned char *s = (unsigned char *)buffer;
344 	unsigned char *e = s + size;
345 	unsigned char *b = dcfparameter.onebits;
346 	unsigned char *c = dcfparameter.zerobits;
347 	u_long       rtc = CVT_NONE;
348 	unsigned int i, lowmax, highmax, cutoff, span;
349 #define BITS 9
350 	unsigned char     histbuf[BITS];
351 	/*
352 	 * the input buffer contains characters with runs of consecutive
353 	 * bits set. These set bits are an indication of the DCF77 pulse
354 	 * length. We assume that we receive the pulse at 50 Baud. Thus
355 	 * a 100ms pulse would generate a 4 bit train (20ms per bit and
356 	 * start bit)
357 	 * a 200ms pulse would create all zeroes (and probably a frame error)
358 	 */
359 
360 	for (i = 0; i < BITS; i++)
361 	{
362 		histbuf[i] = 0;
363 	}
364 
365 	cutoff = 0;
366 	lowmax = 0;
367 
368 	while (s < e)
369 	{
370 		unsigned int ch = *s ^ 0xFF;
371 		/*
372 		 * these lines are left as an excercise to the reader 8-)
373 		 */
374 		if (!((ch+1) & ch) || !*s)
375 		{
376 
377 			for (i = 0; ch; i++)
378 			{
379 				ch >>= 1;
380 			}
381 
382 			*s = i;
383 			histbuf[i]++;
384 			cutoff += i;
385 			lowmax++;
386 		}
387 		else
388 		{
389 			parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: character check for 0x%x@%d FAILED\n", *s, (int)(s - (unsigned char *)buffer)));
390 			*s = (unsigned char)~0;
391 			rtc = CVT_FAIL|CVT_BADFMT;
392 		}
393 		s++;
394 	}
395 
396 	if (lowmax)
397 	{
398 		cutoff /= lowmax;
399 	}
400 	else
401 	{
402 		cutoff = 4;	/* doesn't really matter - it'll fail anyway, but gives error output */
403 	}
404 
405 	parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: average bit count: %d\n", cutoff));
406 
407 	lowmax = 0;
408 	highmax = 0;
409 
410 	parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: histogram:"));
411 	for (i = 0; i <= cutoff; i++)
412 	{
413 		lowmax+=histbuf[i] * i;
414 		highmax += histbuf[i];
415 		parseprintf(DD_RAWDCF,(" %d", histbuf[i]));
416 	}
417 	parseprintf(DD_RAWDCF, (" <M>"));
418 
419 	lowmax += highmax / 2;
420 
421 	if (highmax)
422 	{
423 		lowmax /= highmax;
424 	}
425 	else
426 	{
427 		lowmax = 0;
428 	}
429 
430 	highmax = 0;
431 	cutoff = 0;
432 
433 	for (; i < BITS; i++)
434 	{
435 		highmax+=histbuf[i] * i;
436 		cutoff +=histbuf[i];
437 		parseprintf(DD_RAWDCF,(" %d", histbuf[i]));
438 	}
439 	parseprintf(DD_RAWDCF,("\n"));
440 
441 	if (cutoff)
442 	{
443 		highmax /= cutoff;
444 	}
445 	else
446 	{
447 		highmax = BITS-1;
448 	}
449 
450 	span = cutoff = lowmax;
451 	for (i = lowmax; i <= highmax; i++)
452 	{
453 		if (histbuf[cutoff] > histbuf[i])
454 		{
455 			cutoff = i;
456 			span = i;
457 		}
458 		else
459 		    if (histbuf[cutoff] == histbuf[i])
460 		    {
461 			    span = i;
462 		    }
463 	}
464 
465 	cutoff = (cutoff + span) / 2;
466 
467 	parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: lower maximum %d, higher maximum %d, cutoff %d\n", lowmax, highmax, cutoff));
468 
469 	s = (unsigned char *)buffer;
470 	while (s < e)
471 	{
472 		if (*s == (unsigned char)~0)
473 		{
474 			*s = '?';
475 		}
476 		else
477 		{
478 			*s = (*s >= cutoff) ? *b : *c;
479 		}
480 		s++;
481 		if (*b) b++;
482 		if (*c) c++;
483 	}
484 
485         if (rtc == CVT_NONE)
486         {
487 	       rtc = convert_rawdcf(buffer, size, &dcfparameter, clock_time);
488 	       if (rtc == CVT_OK)
489 	       {
490 			time_t newtime;
491 
492 			newtime = parse_to_unixtime(clock_time, &rtc);
493 			if ((rtc == CVT_OK) && t)
494 			{
495 				if ((newtime - t->tcode) == 60) /* guard against multi bit errors */
496 				{
497 					clock_time->utctime = newtime;
498 				}
499 				else
500 				{
501 					rtc = CVT_FAIL|CVT_BADTIME;
502 				}
503 				t->tcode            = newtime;
504 			}
505 	       }
506         }
507 
508     	return rtc;
509 }
510 
511 /*
512  * pps_rawdcf
513  *
514  * currently a very stupid version - should be extended to decode
515  * also ones and zeros (which is easy)
516  */
517 /*ARGSUSED*/
518 static u_long
519 pps_rawdcf(
520 	parse_t *parseio,
521 	int status,
522 	timestamp_t *ptime
523 	)
524 {
525 	if (!status)		/* negative edge for simpler wiring (Rx->DCD) */
526 	{
527 		parseio->parse_dtime.parse_ptime  = *ptime;
528 		parseio->parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS;
529 	}
530 
531 	return CVT_NONE;
532 }
533 
534 static u_long
535 snt_rawdcf(
536 	parse_t *parseio,
537 	timestamp_t *ptime
538 	)
539 {
540 	if ((parseio->parse_dtime.parse_status & CVT_MASK) == CVT_OK)
541 	{
542 		parseio->parse_dtime.parse_stime = *ptime;
543 
544 #ifdef PARSEKERNEL
545 		parseio->parse_dtime.parse_time.tv.tv_sec++;
546 #else
547 		parseio->parse_dtime.parse_time.fp.l_ui++;
548 #endif
549 
550 		parseprintf(DD_RAWDCF,("parse: snt_rawdcf: time stamp synthesized offset %d seconds\n", parseio->parse_index - 1));
551 
552 		return updatetimeinfo(parseio, parseio->parse_lstate);
553 	}
554 	return CVT_NONE;
555 }
556 
557 /*
558  * inp_rawdcf
559  *
560  * grab DCF77 data from input stream
561  */
562 static u_long
563 inp_rawdcf(
564 	  parse_t      *parseio,
565 	  unsigned int  ch,
566 	  timestamp_t  *tstamp
567 	  )
568 {
569 	static struct timeval timeout = { 1, 500000 }; /* 1.5 secongs denote second #60 */
570 
571 	parseprintf(DD_PARSE, ("inp_rawdcf(0x%lx, 0x%x, ...)\n", (long)parseio, ch));
572 
573 	parseio->parse_dtime.parse_stime = *tstamp; /* collect timestamp */
574 
575 	if (parse_timedout(parseio, tstamp, &timeout))
576 	{
577 		parseprintf(DD_PARSE, ("inp_rawdcf: time out seen\n"));
578 
579 		(void) parse_end(parseio);
580 		(void) parse_addchar(parseio, ch);
581 		return PARSE_INP_TIME;
582 	}
583 	else
584 	{
585 		unsigned int rtc;
586 
587 		rtc = parse_addchar(parseio, ch);
588 		if (rtc == PARSE_INP_SKIP)
589 		{
590 			if (snt_rawdcf(parseio, tstamp) == CVT_OK)
591 				return PARSE_INP_SYNTH;
592 		}
593 		return rtc;
594 	}
595 }
596 
597 #else /* not (REFCLOCK && CLOCK_PARSE && CLOCK_RAWDCF) */
598 int clk_rawdcf_bs;
599 #endif /* not (REFCLOCK && CLOCK_PARSE && CLOCK_RAWDCF) */
600 
601 /*
602  * History:
603  *
604  * clk_rawdcf.c,v
605  * Revision 4.18  2006/06/22 18:40:01  kardel
606  * clean up signedness (gcc 4)
607  *
608  * Revision 4.17  2006/01/22 16:01:55  kardel
609  * update version information
610  *
611  * Revision 4.16  2006/01/22 15:51:22  kardel
612  * generate reasonable timecode output on invalid input
613  *
614  * Revision 4.15  2005/08/06 19:17:06  kardel
615  * clean log output
616  *
617  * Revision 4.14  2005/08/06 17:39:40  kardel
618  * cleanup size handling wrt/ to buffer boundaries
619  *
620  * Revision 4.13  2005/04/16 17:32:10  kardel
621  * update copyright
622  *
623  * Revision 4.12  2004/11/14 15:29:41  kardel
624  * support PPSAPI, upgrade Copyright to Berkeley style
625  *
626  * Revision 4.9  1999/12/06 13:42:23  kardel
627  * transfer correctly converted time codes always into tcode
628  *
629  * Revision 4.8  1999/11/28 09:13:50  kardel
630  * RECON_4_0_98F
631  *
632  * Revision 4.7  1999/04/01 20:07:20  kardel
633  * added checking for minutie increment of timestamps in clk_rawdcf.c
634  *
635  * Revision 4.6  1998/06/14 21:09:37  kardel
636  * Sun acc cleanup
637  *
638  * Revision 4.5  1998/06/13 12:04:16  kardel
639  * fix SYSV clock name clash
640  *
641  * Revision 4.4  1998/06/12 15:22:28  kardel
642  * fix prototypes
643  *
644  * Revision 4.3  1998/06/06 18:33:36  kardel
645  * simplified condidional compile expression
646  *
647  * Revision 4.2  1998/05/24 11:04:18  kardel
648  * triggering PPS on negative edge for simpler wiring (Rx->DCD)
649  *
650  * Revision 4.1  1998/05/24 09:39:53  kardel
651  * implementation of the new IO handling model
652  *
653  * Revision 4.0  1998/04/10 19:45:30  kardel
654  * Start 4.0 release version numbering
655  *
656  * from V3 3.24 log info deleted 1998/04/11 kardel
657  *
658  */
659