1 /* 2 * systime -- routines to fiddle a UNIX clock. 3 * 4 * ATTENTION: Get approval from Dave Mills on all changes to this file! 5 * 6 */ 7 #include <config.h> 8 #include <math.h> 9 10 #include "ntp.h" 11 #include "ntpd.h" 12 #include "ntp_syslog.h" 13 #include "ntp_stdlib.h" 14 #include "ntp_random.h" 15 #include "iosignal.h" 16 #include "timevalops.h" 17 #include "timespecops.h" 18 #include "ntp_calendar.h" 19 #include "lib_strbuf.h" 20 21 #ifdef HAVE_SYS_PARAM_H 22 # include <sys/param.h> 23 #endif 24 #ifdef HAVE_UTMP_H 25 # include <utmp.h> 26 #endif /* HAVE_UTMP_H */ 27 #ifdef HAVE_UTMPX_H 28 # include <utmpx.h> 29 #endif /* HAVE_UTMPX_H */ 30 31 int allow_panic = FALSE; /* allow panic correction (-g) */ 32 int enable_panic_check = TRUE; /* Can we check allow_panic's state? */ 33 34 u_long sys_lamport; /* Lamport violation */ 35 u_long sys_tsrounding; /* timestamp rounding errors */ 36 37 #ifndef USE_COMPILETIME_PIVOT 38 # define USE_COMPILETIME_PIVOT 1 39 #endif 40 41 /* 42 * These routines (get_systime, step_systime, adj_systime) implement an 43 * interface between the system independent NTP clock and the Unix 44 * system clock in various architectures and operating systems. Time is 45 * a precious quantity in these routines and every effort is made to 46 * minimize errors by unbiased rounding and amortizing adjustment 47 * residues. 48 * 49 * In order to improve the apparent resolution, provide unbiased 50 * rounding and most importantly ensure that the readings cannot be 51 * predicted, the low-order unused portion of the time below the minimum 52 * time to read the clock is filled with an unbiased random fuzz. 53 * 54 * The sys_tick variable specifies the system clock tick interval in 55 * seconds, for stepping clocks, defined as those which return times 56 * less than MINSTEP greater than the previous reading. For systems that 57 * use a high-resolution counter such that each clock reading is always 58 * at least MINSTEP greater than the prior, sys_tick is the time to read 59 * the system clock. 60 * 61 * The sys_fuzz variable measures the minimum time to read the system 62 * clock, regardless of its precision. When reading the system clock 63 * using get_systime() after sys_tick and sys_fuzz have been determined, 64 * ntpd ensures each unprocessed clock reading is no less than sys_fuzz 65 * later than the prior unprocessed reading, and then fuzzes the bits 66 * below sys_fuzz in the timestamp returned, ensuring each of its 67 * resulting readings is strictly later than the previous. 68 * 69 * When slewing the system clock using adj_systime() (with the kernel 70 * loop discipline unavailable or disabled), adjtime() offsets are 71 * quantized to sys_tick, if sys_tick is greater than sys_fuzz, which 72 * is to say if the OS presents a stepping clock. Otherwise, offsets 73 * are quantized to the microsecond resolution of adjtime()'s timeval 74 * input. The remaining correction sys_residual is carried into the 75 * next adjtime() and meanwhile is also factored into get_systime() 76 * readings. 77 */ 78 double sys_tick = 0; /* tick size or time to read (s) */ 79 double sys_fuzz = 0; /* min. time to read the clock (s) */ 80 long sys_fuzz_nsec = 0; /* min. time to read the clock (ns) */ 81 double measured_tick; /* non-overridable sys_tick (s) */ 82 double sys_residual = 0; /* adjustment residue (s) */ 83 int trunc_os_clock; /* sys_tick > measured_tick */ 84 time_stepped_callback step_callback; 85 86 #ifndef SIM 87 /* perlinger@ntp.org: As 'get_sysime()' does it's own check for clock 88 * backstepping, this could probably become a local variable in 89 * 'get_systime()' and the cruft associated with communicating via a 90 * static value could be removed after the v4.2.8 release. 91 */ 92 static int lamport_violated; /* clock was stepped back */ 93 #endif /* !SIM */ 94 95 #ifdef DEBUG 96 static int systime_init_done; 97 # define DONE_SYSTIME_INIT() systime_init_done = TRUE 98 #else 99 # define DONE_SYSTIME_INIT() do {} while (FALSE) 100 #endif 101 102 #ifdef HAVE_SIGNALED_IO 103 int using_sigio; 104 #endif 105 106 #ifdef SYS_WINNT 107 CRITICAL_SECTION get_systime_cs; 108 #endif 109 110 111 void 112 set_sys_fuzz( 113 double fuzz_val 114 ) 115 { 116 sys_fuzz = fuzz_val; 117 INSIST(sys_fuzz >= 0); 118 INSIST(sys_fuzz <= 1.0); 119 /* [Bug 3450] ensure nsec fuzz >= sys_fuzz to reduce chance of 120 * short-falling fuzz advance 121 */ 122 sys_fuzz_nsec = (long)ceil(sys_fuzz * 1e9); 123 } 124 125 126 void 127 init_systime(void) 128 { 129 INIT_GET_SYSTIME_CRITSEC(); 130 INIT_WIN_PRECISE_TIME(); 131 DONE_SYSTIME_INIT(); 132 } 133 134 135 #ifndef SIM /* ntpsim.c has get_systime() and friends for sim */ 136 137 static inline void 138 get_ostime( 139 struct timespec * tsp 140 ) 141 { 142 int rc; 143 long ticks; 144 145 #if defined(HAVE_CLOCK_GETTIME) 146 rc = clock_gettime(CLOCK_REALTIME, tsp); 147 #elif defined(HAVE_GETCLOCK) 148 rc = getclock(TIMEOFDAY, tsp); 149 #else 150 struct timeval tv; 151 152 rc = GETTIMEOFDAY(&tv, NULL); 153 tsp->tv_sec = tv.tv_sec; 154 tsp->tv_nsec = tv.tv_usec * 1000; 155 #endif 156 if (rc < 0) { 157 msyslog(LOG_ERR, "read system clock failed: %m (%d)", 158 errno); 159 exit(1); 160 } 161 162 if (trunc_os_clock) { 163 ticks = (long)((tsp->tv_nsec * 1e-9) / sys_tick); 164 tsp->tv_nsec = (long)(ticks * 1e9 * sys_tick); 165 } 166 } 167 168 169 /* 170 * get_systime - return system time in NTP timestamp format. 171 */ 172 void 173 get_systime( 174 l_fp *now /* system time */ 175 ) 176 { 177 static struct timespec ts_last; /* last sampled os time */ 178 static struct timespec ts_prev; /* prior os time */ 179 static l_fp lfp_prev; /* prior result */ 180 struct timespec ts; /* seconds and nanoseconds */ 181 struct timespec ts_min; /* earliest permissible */ 182 struct timespec ts_lam; /* lamport fictional increment */ 183 double dfuzz; 184 l_fp result; 185 l_fp lfpfuzz; 186 l_fp lfpdelta; 187 188 get_ostime(&ts); 189 DEBUG_REQUIRE(systime_init_done); 190 ENTER_GET_SYSTIME_CRITSEC(); 191 192 /* First check if here was a Lamport violation, that is, two 193 * successive calls to 'get_ostime()' resulted in negative 194 * time difference. Use a few milliseconds of permissible 195 * tolerance -- being too sharp can hurt here. (This is intented 196 * for the Win32 target, where the HPC interpolation might 197 * introduce small steps backward. It should not be an issue on 198 * systems where get_ostime() results in a true syscall.) 199 */ 200 if (cmp_tspec(add_tspec_ns(ts, 50000000), ts_last) < 0) { 201 lamport_violated = 1; 202 sys_lamport++; 203 } 204 ts_last = ts; 205 206 /* 207 * After default_get_precision() has set a nonzero sys_fuzz, 208 * ensure every reading of the OS clock advances by at least 209 * sys_fuzz over the prior reading, thereby assuring each 210 * fuzzed result is strictly later than the prior. Limit the 211 * necessary fiction to 1 second. 212 */ 213 if (!USING_SIGIO()) { 214 ts_min = add_tspec_ns(ts_prev, sys_fuzz_nsec); 215 if (cmp_tspec(ts, ts_min) < 0) { 216 ts_lam = sub_tspec(ts_min, ts); 217 if (ts_lam.tv_sec > 0 && !lamport_violated) { 218 msyslog(LOG_ERR, 219 "get_systime Lamport advance exceeds one second (%.9f)", 220 ts_lam.tv_sec + 221 1e-9 * ts_lam.tv_nsec); 222 exit(1); 223 } 224 if (!lamport_violated) 225 ts = ts_min; 226 } 227 ts_prev = ts; 228 } 229 230 /* convert from timespec to l_fp fixed-point */ 231 result = tspec_stamp_to_lfp(ts); 232 233 /* 234 * Add in the fuzz. 'ntp_random()' returns [0..2**31-1] so we 235 * must scale up the result by 2.0 to cover the full fractional 236 * range. 237 */ 238 dfuzz = ntp_uurandom() * sys_fuzz; 239 DTOLFP(dfuzz, &lfpfuzz); 240 L_ADD(&result, &lfpfuzz); 241 242 /* 243 * Ensure result is strictly greater than prior result (ignoring 244 * sys_residual's effect for now) once sys_fuzz has been 245 * determined. 246 * 247 * [Bug 3450] Rounding errors and time slew can lead to a 248 * violation of the expected postcondition. This is bound to 249 * happen from time to time (depending on state of the random 250 * generator, the current slew and the closeness of system time 251 * stamps drawn) and does not warrant a syslog entry. Instead it 252 * makes much more sense to ensure the postcondition and hop 253 * along silently. 254 */ 255 if (!USING_SIGIO()) { 256 if ( !L_ISZERO(&lfp_prev) 257 && !lamport_violated 258 && (sys_fuzz > 0.0) 259 ) { 260 lfpdelta = result; 261 L_SUB(&lfpdelta, &lfp_prev); 262 L_SUBUF(&lfpdelta, 1); 263 if (lfpdelta.l_i < 0) 264 { 265 L_NEG(&lfpdelta); 266 DPRINTF(1, ("get_systime: postcond failed by %s secs, fixed\n", 267 lfptoa(&lfpdelta, 9))); 268 result = lfp_prev; 269 L_ADDUF(&result, 1); 270 sys_tsrounding++; 271 } 272 } 273 lfp_prev = result; 274 if (lamport_violated) 275 lamport_violated = FALSE; 276 } 277 LEAVE_GET_SYSTIME_CRITSEC(); 278 *now = result; 279 } 280 281 282 /* 283 * adj_systime - adjust system time by the argument. 284 */ 285 #if !defined SYS_WINNT 286 int /* 0 okay, 1 error */ 287 adj_systime( 288 double now /* adjustment (s) */ 289 ) 290 { 291 struct timeval adjtv; /* new adjustment */ 292 struct timeval oadjtv; /* residual adjustment */ 293 double quant; /* quantize to multiples of */ 294 double dtemp; 295 long ticks; 296 int isneg = 0; 297 298 /* 299 * The Windows port adj_systime() depends on being called each 300 * second even when there's no additional correction, to allow 301 * emulation of adjtime() behavior on top of an API that simply 302 * sets the current rate. This POSIX implementation needs to 303 * ignore invocations with zero correction, otherwise ongoing 304 * EVNT_NSET adjtime() can be aborted by a tiny adjtime() 305 * triggered by sys_residual. 306 */ 307 if (0. == now) { 308 if (enable_panic_check && allow_panic) { 309 msyslog(LOG_ERR, "adj_systime: allow_panic is TRUE!"); 310 INSIST(!allow_panic); 311 } 312 return TRUE; 313 } 314 315 /* 316 * Most Unix adjtime() implementations adjust the system clock 317 * in microsecond quanta, but some adjust in 10-ms quanta. We 318 * carefully round the adjustment to the nearest quantum, then 319 * adjust in quanta and keep the residue for later. 320 */ 321 dtemp = now + sys_residual; 322 if (dtemp < 0) { 323 isneg = 1; 324 dtemp = -dtemp; 325 } 326 adjtv.tv_sec = (long)dtemp; 327 dtemp -= adjtv.tv_sec; 328 if (sys_tick > sys_fuzz) 329 quant = sys_tick; 330 else 331 quant = 1e-6; 332 ticks = (long)(dtemp / quant + .5); 333 adjtv.tv_usec = (long)(ticks * quant * 1.e6 + .5); 334 /* The rounding in the conversions could us push over the 335 * limits: make sure the result is properly normalised! 336 * note: sign comes later, all numbers non-negative here. 337 */ 338 if (adjtv.tv_usec >= 1000000) { 339 adjtv.tv_sec += 1; 340 adjtv.tv_usec -= 1000000; 341 dtemp -= 1.; 342 } 343 /* set the new residual with leftover from correction */ 344 sys_residual = dtemp - adjtv.tv_usec * 1.e-6; 345 346 /* 347 * Convert to signed seconds and microseconds for the Unix 348 * adjtime() system call. Note we purposely lose the adjtime() 349 * leftover. 350 */ 351 if (isneg) { 352 adjtv.tv_sec = -adjtv.tv_sec; 353 adjtv.tv_usec = -adjtv.tv_usec; 354 sys_residual = -sys_residual; 355 } 356 if (adjtv.tv_sec != 0 || adjtv.tv_usec != 0) { 357 if (adjtime(&adjtv, &oadjtv) < 0) { 358 msyslog(LOG_ERR, "adj_systime: %m"); 359 if (enable_panic_check && allow_panic) { 360 msyslog(LOG_ERR, "adj_systime: allow_panic is TRUE!"); 361 } 362 return FALSE; 363 } 364 } 365 if (enable_panic_check && allow_panic) { 366 msyslog(LOG_ERR, "adj_systime: allow_panic is TRUE!"); 367 } 368 return TRUE; 369 } 370 #endif 371 372 /* 373 * helper to keep utmp/wtmp up to date 374 */ 375 static void 376 update_uwtmp( 377 struct timeval timetv, 378 struct timeval tvlast 379 ) 380 { 381 struct timeval tvdiff; 382 /* 383 * FreeBSD, for example, has: 384 * struct utmp { 385 * char ut_line[UT_LINESIZE]; 386 * char ut_name[UT_NAMESIZE]; 387 * char ut_host[UT_HOSTSIZE]; 388 * long ut_time; 389 * }; 390 * and appends line="|", name="date", host="", time for the OLD 391 * and appends line="{", name="date", host="", time for the NEW // } 392 * to _PATH_WTMP . 393 * 394 * Some OSes have utmp, some have utmpx. 395 */ 396 397 /* 398 * Write old and new time entries in utmp and wtmp if step 399 * adjustment is greater than one second. 400 * 401 * This might become even Uglier... 402 */ 403 tvdiff = abs_tval(sub_tval(timetv, tvlast)); 404 if (tvdiff.tv_sec > 0) { 405 #ifdef HAVE_UTMP_H 406 struct utmp ut; 407 #endif 408 #ifdef HAVE_UTMPX_H 409 struct utmpx utx; 410 #endif 411 412 #ifdef HAVE_UTMP_H 413 ZERO(ut); 414 #endif 415 #ifdef HAVE_UTMPX_H 416 ZERO(utx); 417 #endif 418 419 /* UTMP */ 420 421 #ifdef UPDATE_UTMP 422 # ifdef HAVE_PUTUTLINE 423 # ifndef _PATH_UTMP 424 # define _PATH_UTMP UTMP_FILE 425 # endif 426 utmpname(_PATH_UTMP); 427 ut.ut_type = OLD_TIME; 428 strlcpy(ut.ut_line, OTIME_MSG, sizeof(ut.ut_line)); 429 ut.ut_time = tvlast.tv_sec; 430 setutent(); 431 pututline(&ut); 432 ut.ut_type = NEW_TIME; 433 strlcpy(ut.ut_line, NTIME_MSG, sizeof(ut.ut_line)); 434 ut.ut_time = timetv.tv_sec; 435 setutent(); 436 pututline(&ut); 437 endutent(); 438 # else /* not HAVE_PUTUTLINE */ 439 # endif /* not HAVE_PUTUTLINE */ 440 #endif /* UPDATE_UTMP */ 441 442 /* UTMPX */ 443 444 #ifdef UPDATE_UTMPX 445 # ifdef HAVE_PUTUTXLINE 446 utx.ut_type = OLD_TIME; 447 strlcpy(utx.ut_line, OTIME_MSG, sizeof(utx.ut_line)); 448 utx.ut_tv = tvlast; 449 setutxent(); 450 pututxline(&utx); 451 utx.ut_type = NEW_TIME; 452 strlcpy(utx.ut_line, NTIME_MSG, sizeof(utx.ut_line)); 453 utx.ut_tv = timetv; 454 setutxent(); 455 pututxline(&utx); 456 endutxent(); 457 # else /* not HAVE_PUTUTXLINE */ 458 # endif /* not HAVE_PUTUTXLINE */ 459 #endif /* UPDATE_UTMPX */ 460 461 /* WTMP */ 462 463 #ifdef UPDATE_WTMP 464 # ifdef HAVE_PUTUTLINE 465 # ifndef _PATH_WTMP 466 # define _PATH_WTMP WTMP_FILE 467 # endif 468 utmpname(_PATH_WTMP); 469 ut.ut_type = OLD_TIME; 470 strlcpy(ut.ut_line, OTIME_MSG, sizeof(ut.ut_line)); 471 ut.ut_time = tvlast.tv_sec; 472 setutent(); 473 pututline(&ut); 474 ut.ut_type = NEW_TIME; 475 strlcpy(ut.ut_line, NTIME_MSG, sizeof(ut.ut_line)); 476 ut.ut_time = timetv.tv_sec; 477 setutent(); 478 pututline(&ut); 479 endutent(); 480 # else /* not HAVE_PUTUTLINE */ 481 # endif /* not HAVE_PUTUTLINE */ 482 #endif /* UPDATE_WTMP */ 483 484 /* WTMPX */ 485 486 #ifdef UPDATE_WTMPX 487 # ifdef HAVE_PUTUTXLINE 488 utx.ut_type = OLD_TIME; 489 utx.ut_tv = tvlast; 490 strlcpy(utx.ut_line, OTIME_MSG, sizeof(utx.ut_line)); 491 # ifdef HAVE_UPDWTMPX 492 updwtmpx(WTMPX_FILE, &utx); 493 # else /* not HAVE_UPDWTMPX */ 494 # endif /* not HAVE_UPDWTMPX */ 495 # else /* not HAVE_PUTUTXLINE */ 496 # endif /* not HAVE_PUTUTXLINE */ 497 # ifdef HAVE_PUTUTXLINE 498 utx.ut_type = NEW_TIME; 499 utx.ut_tv = timetv; 500 strlcpy(utx.ut_line, NTIME_MSG, sizeof(utx.ut_line)); 501 # ifdef HAVE_UPDWTMPX 502 updwtmpx(WTMPX_FILE, &utx); 503 # else /* not HAVE_UPDWTMPX */ 504 # endif /* not HAVE_UPDWTMPX */ 505 # else /* not HAVE_PUTUTXLINE */ 506 # endif /* not HAVE_PUTUTXLINE */ 507 #endif /* UPDATE_WTMPX */ 508 509 } 510 } 511 512 /* 513 * step_systime - step the system clock. 514 */ 515 516 int 517 step_systime( 518 double step 519 ) 520 { 521 time_t pivot; /* for ntp era unfolding */ 522 struct timeval timetv, tvlast; 523 struct timespec timets; 524 l_fp fp_ofs, fp_sys; /* offset and target system time in FP */ 525 526 /* 527 * Get pivot time for NTP era unfolding. Since we don't step 528 * very often, we can afford to do the whole calculation from 529 * scratch. And we're not in the time-critical path yet. 530 */ 531 #if SIZEOF_TIME_T > 4 532 pivot = basedate_get_eracenter(); 533 #else 534 /* This makes sure the resulting time stamp is on or after 535 * 1969-12-31/23:59:59 UTC and gives us additional two years, 536 * from the change of NTP era in 2036 to the UNIX rollover in 537 * 2038. (Minus one second, but that won't hurt.) We *really* 538 * need a longer 'time_t' after that! Or a different baseline, 539 * but that would cause other serious trouble, too. 540 */ 541 pivot = 0x7FFFFFFF; 542 #endif 543 544 /* get the complete jump distance as l_fp */ 545 DTOLFP(sys_residual, &fp_sys); 546 DTOLFP(step, &fp_ofs); 547 L_ADD(&fp_ofs, &fp_sys); 548 549 /* ---> time-critical path starts ---> */ 550 551 /* get the current time as l_fp (without fuzz) and as struct timeval */ 552 get_ostime(&timets); 553 fp_sys = tspec_stamp_to_lfp(timets); 554 tvlast.tv_sec = timets.tv_sec; 555 tvlast.tv_usec = (timets.tv_nsec + 500) / 1000; 556 557 /* get the target time as l_fp */ 558 L_ADD(&fp_sys, &fp_ofs); 559 560 /* unfold the new system time */ 561 timetv = lfp_stamp_to_tval(fp_sys, &pivot); 562 563 /* now set new system time */ 564 if (ntp_set_tod(&timetv, NULL) != 0) { 565 msyslog(LOG_ERR, "step-systime: %m"); 566 if (enable_panic_check && allow_panic) { 567 msyslog(LOG_ERR, "step_systime: allow_panic is TRUE!"); 568 } 569 return FALSE; 570 } 571 572 /* <--- time-critical path ended with 'ntp_set_tod()' <--- */ 573 574 sys_residual = 0; 575 lamport_violated = (step < 0); 576 if (step_callback) 577 (*step_callback)(); 578 579 #ifdef NEED_HPUX_ADJTIME 580 /* 581 * CHECKME: is this correct when called by ntpdate????? 582 */ 583 _clear_adjtime(); 584 #endif 585 586 update_uwtmp(timetv, tvlast); 587 if (enable_panic_check && allow_panic) { 588 msyslog(LOG_ERR, "step_systime: allow_panic is TRUE!"); 589 INSIST(!allow_panic); 590 } 591 return TRUE; 592 } 593 594 595 #if SIZEOF_TIME_T > 4 596 static const char * 597 tv_fmt_libbuf( 598 const struct timeval * ptv 599 ) 600 { 601 char * retv; 602 vint64 secs; 603 ntpcal_split dds; 604 struct calendar jd; 605 606 secs = time_to_vint64(&ptv->tv_sec); 607 dds = ntpcal_daysplit(&secs); 608 ntpcal_daysplit_to_date(&jd, &dds, DAY_UNIX_STARTS); 609 LIB_GETBUF(retv); 610 snprintf(retv, LIB_BUFLENGTH, 611 "%04hu-%02hu-%02hu/%02hu:%02hu:%02hu.%06u", 612 jd.year, (u_short)jd.month, (u_short)jd.monthday, 613 (u_short)jd.hour, (u_short)jd.minute, (u_short)jd.second, 614 (u_int)ptv->tv_usec); 615 return retv; 616 } 617 #endif /* SIZEOF_TIME_T > 4 */ 618 619 620 int /*BOOL*/ 621 clamp_systime(void) 622 { 623 #if SIZEOF_TIME_T > 4 624 625 struct timeval tvbase, tvlast; 626 struct timespec timets; 627 628 tvbase.tv_sec = basedate_get_erabase(); 629 tvbase.tv_usec = 0; 630 631 /* ---> time-critical path starts ---> */ 632 633 /* get the current time as l_fp (without fuzz) and as struct timeval */ 634 get_ostime(&timets); 635 tvlast.tv_sec = timets.tv_sec; 636 tvlast.tv_usec = (timets.tv_nsec + 500) / 1000; 637 if (tvlast.tv_usec >= 1000000) { 638 tvlast.tv_usec -= 1000000; 639 tvlast.tv_sec += 1; 640 } 641 642 if (tvbase.tv_sec > tvlast.tv_sec) { 643 /* now set new system time */ 644 if (ntp_set_tod(&tvbase, NULL) != 0) { 645 msyslog(LOG_ERR, "clamp-systime: %m"); 646 return FALSE; 647 } 648 } else { 649 msyslog(LOG_INFO, 650 "clamp-systime: clock (%s) in allowed range", 651 tv_fmt_libbuf(&tvlast)); 652 return FALSE; 653 } 654 655 /* <--- time-critical path ended with 'ntp_set_tod()' <--- */ 656 657 sys_residual = 0; 658 lamport_violated = (tvbase.tv_sec < tvlast.tv_sec); 659 if (step_callback) 660 (*step_callback)(); 661 662 # ifdef NEED_HPUX_ADJTIME 663 /* 664 * CHECKME: is this correct when called by ntpdate????? 665 */ 666 _clear_adjtime(); 667 # endif 668 669 update_uwtmp(tvbase, tvlast); 670 msyslog(LOG_WARNING, 671 "clamp-systime: clock stepped from %s to %s!", 672 tv_fmt_libbuf(&tvlast), tv_fmt_libbuf(&tvbase)); 673 return TRUE; 674 675 #else 676 677 return FALSE; 678 679 #endif 680 } 681 682 #endif /* !SIM */ 683