1 /* 2 * ntp.h - NTP definitions for the masses 3 */ 4 #ifndef NTP_H 5 #define NTP_H 6 7 #include "ntp_types.h" 8 #include <math.h> 9 #ifdef OPENSSL 10 #include "ntp_crypto.h" 11 #endif /* OPENSSL */ 12 13 /* 14 * Calendar arithmetic - contributed by G. Healton 15 */ 16 #define YEAR_BREAK 500 /* years < this are tm_year values: 17 * Break < AnyFourDigitYear && Break > 18 * Anytm_yearYear */ 19 20 #define YEAR_PIVOT 98 /* 97/98: years < this are year 2000+ 21 * FYI: official UNIX pivot year is 22 * 68/69 */ 23 24 /* 25 * Number of Days since 1 BC Gregorian to 1 January of given year 26 */ 27 #define julian0(year) (((year) * 365 ) + ((year) > 0 ? (((year) + 3) \ 28 / 4 - ((year - 1) / 100) + ((year - 1) / \ 29 400)) : 0)) 30 31 /* 32 * Number of days since start of NTP time to 1 January of given year 33 */ 34 #define ntp0(year) (julian0(year) - julian0(1900)) 35 36 /* 37 * Number of days since start of UNIX time to 1 January of given year 38 */ 39 #define unix0(year) (julian0(year) - julian0(1970)) 40 41 /* 42 * LEAP YEAR test for full 4-digit years (e.g, 1999, 2010) 43 */ 44 #define isleap_4(y) ((y) % 4 == 0 && !((y) % 100 == 0 && !(y % \ 45 400 == 0))) 46 47 /* 48 * LEAP YEAR test for tm_year (struct tm) years (e.g, 99, 110) 49 */ 50 #define isleap_tm(y) ((y) % 4 == 0 && !((y) % 100 == 0 && !(((y) \ 51 + 1900) % 400 == 0))) 52 53 /* 54 * to convert simple two-digit years to tm_year style years: 55 * 56 * if (year < YEAR_PIVOT) 57 * year += 100; 58 * 59 * to convert either two-digit OR tm_year years to four-digit years: 60 * 61 * if (year < YEAR_PIVOT) 62 * year += 100; 63 * 64 * if (year < YEAR_BREAK) 65 * year += 1900; 66 */ 67 68 /* 69 * How to get signed characters. On machines where signed char works, 70 * use it. On machines where signed char doesn't work, char had better 71 * be signed. 72 */ 73 #ifdef NEED_S_CHAR_TYPEDEF 74 # if SIZEOF_SIGNED_CHAR 75 typedef signed char s_char; 76 # else 77 typedef char s_char; 78 # endif 79 /* XXX: Why is this sequent bit INSIDE this test? */ 80 # ifdef sequent 81 # undef SO_RCVBUF 82 # undef SO_SNDBUF 83 # endif 84 #endif 85 #ifndef TRUE 86 # define TRUE 1 87 #endif /* TRUE */ 88 #ifndef FALSE 89 # define FALSE 0 90 #endif /* FALSE */ 91 92 /* 93 * NTP protocol parameters. See section 3.2.6 of the specification. 94 */ 95 #define NTP_VERSION ((u_char)4) /* current version number */ 96 #define NTP_OLDVERSION ((u_char)1) /* oldest credible version */ 97 #define NTP_PORT 123 /* included for non-unix machines */ 98 99 /* 100 * Poll interval parameters 101 */ 102 #define NTP_UNREACH 16 /* poll interval backoff count */ 103 #define NTP_MINPOLL 4 /* log2 min poll interval (16 s) */ 104 #define NTP_MINDPOLL 6 /* log2 default min poll (64 s) */ 105 #define NTP_MAXDPOLL 10 /* log2 default max poll (~17 m) */ 106 #define NTP_MAXPOLL 17 /* log2 max poll interval (~36 h) */ 107 #define NTP_BURST 8 /* packets in burst */ 108 #define BURST_DELAY 2 /* interburst delay (s) */ 109 #define RESP_DELAY 1 /* crypto response delay (s) */ 110 111 /* 112 * Clock filter algorithm tuning parameters 113 */ 114 #define MINDISPERSE .01 /* min dispersion */ 115 #define MAXDISPERSE 16. /* max dispersion */ 116 #define NTP_SHIFT 8 /* clock filter stages */ 117 #define NTP_FWEIGHT .5 /* clock filter weight */ 118 119 /* 120 * Selection algorithm tuning parameters 121 */ 122 #define NTP_MINCLOCK 4 /* minimum survivors */ 123 #define NTP_MAXCLOCK 50 /* maximum candidates */ 124 #define MAXDISTANCE 1. /* max root distance */ 125 #define CLOCK_SGATE 3. /* popcorn spike gate */ 126 #define HUFFPUFF 900 /* huff-n'-puff sample interval (s) */ 127 #define HYST .5 /* anti-clockhop hysteresis */ 128 #define HYST_TC .875 /* anti-clockhop hysteresis decay */ 129 #define MAX_TTL 8 /* max ttl mapping vector size */ 130 #define NTP_MAXEXTEN 1024 /* maximum extension field size */ 131 132 /* 133 * Miscellaneous stuff 134 */ 135 #define NTP_MAXKEY 65535 /* maximum authentication key number */ 136 137 /* 138 * Limits of things 139 */ 140 #define MAXFILENAME 128 /* max length of file name */ 141 #define MAXHOSTNAME 512 /* max length of host/node name */ 142 #define NTP_MAXSTRLEN 256 /* maximum string length */ 143 #define MAXINTERFACES 512 /* max number of interfaces */ 144 145 /* 146 * Operations for jitter calculations (these use doubles). 147 * 148 * Note that we carefully separate the jitter component from the 149 * dispersion component (frequency error plus precision). The frequency 150 * error component is computed as CLOCK_PHI times the difference between 151 * the epoch of the time measurement and the reference time. The 152 * precision componen is computed as the square root of the mean of the 153 * squares of a zero-mean, uniform distribution of unit maximum 154 * amplitude. Whether this makes statistical sense may be arguable. 155 */ 156 #define SQUARE(x) ((x) * (x)) 157 #define SQRT(x) (sqrt(x)) 158 #define DIFF(x, y) (SQUARE((x) - (y))) 159 #define LOGTOD(a) ((a) < 0 ? 1. / (1L << -(a)) : \ 160 1L << (int)(a)) /* log2 to double */ 161 #define UNIVAR(x) (SQUARE(.28867513 * LOGTOD(x))) /* std uniform distr */ 162 #define ULOGTOD(a) (1L << (int)(a)) /* ulog2 to double */ 163 164 #define EVENT_TIMEOUT 0 /* one second, that is */ 165 166 /* 167 * The interface structure is used to hold the addresses and socket 168 * numbers of each of the interfaces we are using. 169 */ 170 struct interface { 171 SOCKET fd; /* socket this is opened on */ 172 SOCKET bfd; /* socket for receiving broadcasts */ 173 struct sockaddr_storage sin; /* interface address */ 174 struct sockaddr_storage bcast; /* broadcast address */ 175 struct sockaddr_storage mask; /* interface mask */ 176 char name[32]; /* name of interface */ 177 int flags; /* interface flags */ 178 int last_ttl; /* last TTL specified */ 179 u_int addr_refid; /* IPv4 addr or IPv6 hash */ 180 int num_mcast; /* No. of IP addresses in multicast socket */ 181 volatile long received; /* number of incoming packets */ 182 long sent; /* number of outgoing packets */ 183 long notsent; /* number of send failures */ 184 }; 185 186 /* 187 * Flags for interfaces 188 */ 189 #define INT_UP 1 /* Interface is up */ 190 #define INT_PPP 2 /* Point-to-point interface */ 191 #define INT_LOOPBACK 4 /* the loopback interface */ 192 #define INT_BROADCAST 8 /* can broadcast out this interface */ 193 #define INT_MULTICAST 16 /* multicasting enabled */ 194 #define INT_BCASTOPEN 32 /* broadcast socket is open */ 195 196 /* 197 * Define flasher bits (tests 1 through 11 in packet procedure) 198 * These reveal the state at the last grumble from the peer and are 199 * most handy for diagnosing problems, even if not strictly a state 200 * variable in the spec. These are recorded in the peer structure. 201 */ 202 #define TEST1 0x0001 /* duplicate packet received */ 203 #define TEST2 0x0002 /* bogus packet received */ 204 #define TEST3 0x0004 /* protocol unsynchronized */ 205 #define TEST4 0x0008 /* access denied */ 206 #define TEST5 0x0010 /* authentication failed */ 207 #define TEST6 0x0020 /* peer clock unsynchronized */ 208 #define TEST7 0x0040 /* peer stratum out of bounds */ 209 #define TEST8 0x0080 /* root delay/dispersion bounds check */ 210 #define TEST9 0x0100 /* peer delay/dispersion bounds check */ 211 #define TEST10 0x0200 /* autokey failed */ 212 #define TEST11 0x0400 /* proventic not confirmed */ 213 214 /* 215 * The peer structure. Holds state information relating to the guys 216 * we are peering with. Most of this stuff is from section 3.2 of the 217 * spec. 218 */ 219 struct peer { 220 struct peer *next; /* pointer to next association */ 221 struct peer *ass_next; /* link pointer in associd hash */ 222 struct sockaddr_storage srcadr; /* address of remote host */ 223 struct interface *dstadr; /* pointer to address on local host */ 224 associd_t associd; /* association ID */ 225 u_char version; /* version number */ 226 u_char hmode; /* local association mode */ 227 u_char hpoll; /* local poll interval */ 228 u_char kpoll; /* last poll interval */ 229 u_char minpoll; /* min poll interval */ 230 u_char maxpoll; /* max poll interval */ 231 u_char burst; /* packets remaining in burst */ 232 u_int flags; /* association flags */ 233 u_char cast_flags; /* additional flags */ 234 u_int flash; /* protocol error test tally bits */ 235 u_char last_event; /* last peer error code */ 236 u_char num_events; /* number of error events */ 237 u_char ttl; /* ttl/refclock mode */ 238 239 /* 240 * Variables used by reference clock support 241 */ 242 struct refclockproc *procptr; /* refclock structure pointer */ 243 u_char refclktype; /* reference clock type */ 244 u_char refclkunit; /* reference clock unit number */ 245 u_char sstclktype; /* clock type for system status word */ 246 247 /* 248 * Variables set by received packet 249 */ 250 u_char leap; /* local leap indicator */ 251 u_char pmode; /* remote association mode */ 252 u_char stratum; /* remote stratum */ 253 s_char precision; /* remote clock precision */ 254 u_char ppoll; /* remote poll interval */ 255 u_int32 refid; /* remote reference ID */ 256 l_fp reftime; /* update epoch */ 257 258 /* 259 * Variables used by authenticated client 260 */ 261 keyid_t keyid; /* current key ID */ 262 #ifdef OPENSSL 263 #define clear_to_zero assoc 264 associd_t assoc; /* peer association ID */ 265 u_int32 crypto; /* peer status word */ 266 EVP_PKEY *pkey; /* public key */ 267 const EVP_MD *digest; /* message digest algorithm */ 268 char *subject; /* certificate subject name */ 269 char *issuer; /* certificate issuer name */ 270 keyid_t pkeyid; /* previous key ID */ 271 keyid_t pcookie; /* peer cookie */ 272 EVP_PKEY *ident_pkey; /* identity key */ 273 tstamp_t fstamp; /* identity filestamp */ 274 BIGNUM *iffval; /* IFF/GQ challenge */ 275 BIGNUM *grpkey; /* GQ group key */ 276 struct value cookval; /* cookie values */ 277 struct value recval; /* receive autokey values */ 278 struct value tai_leap; /* leapseconds values */ 279 struct exten *cmmd; /* extension pointer */ 280 281 /* 282 * Variables used by authenticated server 283 */ 284 keyid_t *keylist; /* session key ID list */ 285 int keynumber; /* current key number */ 286 struct value encrypt; /* send encrypt values */ 287 struct value sndval; /* send autokey values */ 288 #else /* OPENSSL */ 289 #define clear_to_zero status 290 #endif /* OPENSSL */ 291 292 /* 293 * Ephemeral state variables 294 */ 295 u_char status; /* peer status */ 296 u_char reach; /* reachability register */ 297 u_long epoch; /* reference epoch */ 298 u_short filter_nextpt; /* index into filter shift register */ 299 double filter_delay[NTP_SHIFT]; /* delay shift register */ 300 double filter_offset[NTP_SHIFT]; /* offset shift register */ 301 double filter_disp[NTP_SHIFT]; /* dispersion shift register */ 302 u_long filter_epoch[NTP_SHIFT]; /* epoch shift register */ 303 u_char filter_order[NTP_SHIFT]; /* filter sort index */ 304 l_fp org; /* originate time stamp */ 305 l_fp rec; /* receive time stamp */ 306 l_fp xmt; /* transmit time stamp */ 307 double offset; /* peer clock offset */ 308 double delay; /* peer roundtrip delay */ 309 double jitter; /* peer jitter (squares) */ 310 double disp; /* peer dispersion */ 311 double estbdelay; /* clock offset to broadcast server */ 312 double hyst; /* anti-clockhop hysteresis */ 313 314 /* 315 * Variables set by received packet 316 */ 317 double rootdelay; /* roundtrip delay to primary clock */ 318 double rootdispersion; /* dispersion to primary clock */ 319 320 /* 321 * End of clear-to-zero area 322 */ 323 u_long update; /* receive epoch */ 324 #define end_clear_to_zero update 325 u_int unreach; /* unreachable count */ 326 u_long outdate; /* send time last packet */ 327 u_long nextdate; /* send time next packet */ 328 u_long nextaction; /* peer local activity timeout (refclocks mainly) */ 329 void (*action) P((struct peer *)); /* action timeout function */ 330 /* 331 * Statistic counters 332 */ 333 u_long timereset; /* time stat counters were reset */ 334 u_long timereceived; /* last packet received time */ 335 u_long timereachable; /* last reachable/unreachable time */ 336 337 u_long sent; /* packets sent */ 338 u_long received; /* packets received */ 339 u_long processed; /* packets processed by the protocol */ 340 u_long badauth; /* packets cryptosum failed */ 341 u_long bogusorg; /* packets bogus origin */ 342 u_long oldpkt; /* packets duplicate packet */ 343 u_long seldisptoolarge; /* packets dispersion to large*/ 344 u_long selbroken; /* not used */ 345 u_long rank; /* number of times selected or in cluster */ 346 }; 347 348 /* 349 * Values for peer.leap, sys_leap 350 */ 351 #define LEAP_NOWARNING 0x0 /* normal, no leap second warning */ 352 #define LEAP_ADDSECOND 0x1 /* last minute of day has 61 seconds */ 353 #define LEAP_DELSECOND 0x2 /* last minute of day has 59 seconds */ 354 #define LEAP_NOTINSYNC 0x3 /* overload, clock is free running */ 355 356 /* 357 * Values for peer.mode 358 */ 359 #define MODE_UNSPEC 0 /* unspecified (old version) */ 360 #define MODE_ACTIVE 1 /* symmetric active */ 361 #define MODE_PASSIVE 2 /* symmetric passive */ 362 #define MODE_CLIENT 3 /* client mode */ 363 #define MODE_SERVER 4 /* server mode */ 364 #define MODE_BROADCAST 5 /* broadcast mode */ 365 #define MODE_CONTROL 6 /* control mode packet */ 366 #define MODE_PRIVATE 7 /* implementation defined function */ 367 #define MODE_BCLIENT 8 /* broadcast client mode */ 368 369 /* 370 * Values for peer.stratum, sys_stratum 371 */ 372 #define STRATUM_REFCLOCK ((u_char)0) /* default stratum */ 373 /* A stratum of 0 in the packet is mapped to 16 internally */ 374 #define STRATUM_PKT_UNSPEC ((u_char)0) /* unspecified in packet */ 375 #define STRATUM_UNSPEC ((u_char)16) /* unspecified */ 376 377 /* 378 * Values for peer.flags 379 */ 380 #define FLAG_CONFIG 0x0001 /* association was configured */ 381 #define FLAG_AUTHENABLE 0x0002 /* authentication required */ 382 #define FLAG_AUTHENTIC 0x0004 /* last message was authentic */ 383 #define FLAG_SKEY 0x0008 /* autokey authentication */ 384 #define FLAG_MCAST 0x0010 /* multicast client mode */ 385 #define FLAG_REFCLOCK 0x0020 /* this is actually a reference clock */ 386 #define FLAG_SYSPEER 0x0040 /* this is one of the selected peers */ 387 #define FLAG_PREFER 0x0080 /* this is the preferred peer */ 388 #define FLAG_BURST 0x0100 /* burst mode */ 389 #define FLAG_IBURST 0x0200 /* initial burst mode */ 390 #define FLAG_NOSELECT 0x0400 /* this is a "noselect" peer */ 391 #define FLAG_ASSOC 0x0800 /* autokey request */ 392 393 /* 394 * Definitions for the clear() routine. We use memset() to clear 395 * the parts of the peer structure which go to zero. These are 396 * used to calculate the start address and length of the area. 397 */ 398 #define CLEAR_TO_ZERO(p) ((char *)&((p)->clear_to_zero)) 399 #define END_CLEAR_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero)) 400 #define LEN_CLEAR_TO_ZERO (END_CLEAR_TO_ZERO((struct peer *)0) \ 401 - CLEAR_TO_ZERO((struct peer *)0)) 402 #define CRYPTO_TO_ZERO(p) ((char *)&((p)->clear_to_zero)) 403 #define END_CRYPTO_TO_ZERO(p) ((char *)&((p)->end_clear_to_zero)) 404 #define LEN_CRYPTO_TO_ZERO (END_CRYPTO_TO_ZERO((struct peer *)0) \ 405 - CRYPTO_TO_ZERO((struct peer *)0)) 406 407 /* 408 * Reference clock identifiers (for pps signal) 409 */ 410 #define PPSREFID (u_int32)"PPS " /* used when pps controls stratum>1 */ 411 412 /* 413 * Reference clock types. Added as necessary. 414 */ 415 #define REFCLK_NONE 0 /* unknown or missing */ 416 #define REFCLK_LOCALCLOCK 1 /* external (e.g., lockclock) */ 417 #define REFCLK_GPS_TRAK 2 /* TRAK 8810 GPS Receiver */ 418 #define REFCLK_WWV_PST 3 /* PST/Traconex 1020 WWV/H */ 419 #define REFCLK_SPECTRACOM 4 /* Spectracom (generic) Receivers */ 420 #define REFCLK_TRUETIME 5 /* TrueTime (generic) Receivers */ 421 #define REFCLK_IRIG_AUDIO 6 /* IRIG-B/W audio decoder */ 422 #define REFCLK_CHU_AUDIO 7 /* CHU audio demodulator/decoder */ 423 #define REFCLK_PARSE 8 /* generic driver (usually DCF77,GPS,MSF) */ 424 #define REFCLK_GPS_MX4200 9 /* Magnavox MX4200 GPS */ 425 #define REFCLK_GPS_AS2201 10 /* Austron 2201A GPS */ 426 #define REFCLK_GPS_ARBITER 11 /* Arbiter 1088A/B/ GPS */ 427 #define REFCLK_IRIG_TPRO 12 /* KSI/Odetics TPRO-S IRIG */ 428 #define REFCLK_ATOM_LEITCH 13 /* Leitch CSD 5300 Master Clock */ 429 #define REFCLK_MSF_EES 14 /* EES M201 MSF Receiver */ 430 #define REFCLK_GPSTM_TRUE 15 /* OLD TrueTime GPS/TM-TMD Receiver */ 431 #define REFCLK_IRIG_BANCOMM 16 /* Bancomm GPS/IRIG Interface */ 432 #define REFCLK_GPS_DATUM 17 /* Datum Programmable Time System */ 433 #define REFCLK_NIST_ACTS 18 /* NIST Auto Computer Time Service */ 434 #define REFCLK_WWV_HEATH 19 /* Heath GC1000 WWV/WWVH Receiver */ 435 #define REFCLK_GPS_NMEA 20 /* NMEA based GPS clock */ 436 #define REFCLK_GPS_VME 21 /* TrueTime GPS-VME Interface */ 437 #define REFCLK_ATOM_PPS 22 /* 1-PPS Clock Discipline */ 438 #define REFCLK_PTB_ACTS 23 /* PTB Auto Computer Time Service */ 439 #define REFCLK_USNO 24 /* Naval Observatory dialup */ 440 #define REFCLK_GPS_HP 26 /* HP 58503A Time/Frequency Receiver */ 441 #define REFCLK_ARCRON_MSF 27 /* ARCRON MSF radio clock. */ 442 #define REFCLK_SHM 28 /* clock attached thru shared memory */ 443 #define REFCLK_PALISADE 29 /* Trimble Navigation Palisade GPS */ 444 #define REFCLK_ONCORE 30 /* Motorola UT Oncore GPS */ 445 #define REFCLK_GPS_JUPITER 31 /* Rockwell Jupiter GPS receiver */ 446 #define REFCLK_CHRONOLOG 32 /* Chrono-log K WWVB receiver */ 447 #define REFCLK_DUMBCLOCK 33 /* Dumb localtime clock */ 448 #define REFCLK_ULINK 34 /* Ultralink M320 WWVB receiver */ 449 #define REFCLK_PCF 35 /* Conrad parallel port radio clock */ 450 #define REFCLK_WWV_AUDIO 36 /* WWV/H audio demodulator/decoder */ 451 #define REFCLK_FG 37 /* Forum Graphic GPS */ 452 #define REFCLK_HOPF_SERIAL 38 /* hopf DCF77/GPS serial receiver */ 453 #define REFCLK_HOPF_PCI 39 /* hopf DCF77/GPS PCI receiver */ 454 #define REFCLK_JJY 40 /* JJY receiver */ 455 #define REFCLK_TT560 41 /* TrueTime 560 IRIG-B decoder */ 456 #define REFCLK_ZYFER 42 /* Zyfer GPStarplus receiver */ 457 #define REFCLK_RIPENCC 43 /* RIPE NCC Trimble driver */ 458 #define REFCLK_NEOCLOCK4X 44 /* NeoClock4X DCF77 or TDF receiver */ 459 #define REFCLK_MAX 44 /* NeoClock4X DCF77 or TDF receiver */ 460 461 /* 462 * Macro for sockaddr_storage structures operations 463 */ 464 #define SOCKCMP(sock1, sock2) \ 465 (((struct sockaddr_storage *)sock1)->ss_family \ 466 == ((struct sockaddr_storage *)sock2)->ss_family ? \ 467 ((struct sockaddr_storage *)sock1)->ss_family == AF_INET ? \ 468 memcmp(&((struct sockaddr_in *)sock1)->sin_addr, \ 469 &((struct sockaddr_in *)sock2)->sin_addr, \ 470 sizeof(struct in_addr)) == 0 : \ 471 memcmp(&((struct sockaddr_in6 *)sock1)->sin6_addr, \ 472 &((struct sockaddr_in6 *)sock2)->sin6_addr, \ 473 sizeof(struct in6_addr)) == 0 : \ 474 0) 475 476 #define SOCKNUL(sock1) \ 477 (((struct sockaddr_storage *)sock1)->ss_family == AF_INET ? \ 478 (((struct sockaddr_in *)sock1)->sin_addr.s_addr == 0) : \ 479 (IN6_IS_ADDR_UNSPECIFIED(&((struct sockaddr_in6 *)sock1)->sin6_addr))) 480 481 #define SOCKLEN(sock) \ 482 (((struct sockaddr_storage *)sock)->ss_family == AF_INET ? \ 483 (sizeof(struct sockaddr_in)) : (sizeof(struct sockaddr_in6))) 484 485 #define ANYSOCK(sock) \ 486 memset(((struct sockaddr_in *)sock), 0, \ 487 sizeof(struct sockaddr_storage)) 488 489 #define ANY_INTERFACE_CHOOSE(sock) \ 490 (((struct sockaddr_storage *)sock)->ss_family == AF_INET ? \ 491 any_interface : any6_interface) 492 493 /* 494 * We tell reference clocks from real peers by giving the reference 495 * clocks an address of the form 127.127.t.u, where t is the type and 496 * u is the unit number. We define some of this here since we will need 497 * some sanity checks to make sure this address isn't interpretted as 498 * that of a normal peer. 499 */ 500 #define REFCLOCK_ADDR 0x7f7f0000 /* 127.127.0.0 */ 501 #define REFCLOCK_MASK 0xffff0000 /* 255.255.0.0 */ 502 503 #define ISREFCLOCKADR(srcadr) ((SRCADR(srcadr) & REFCLOCK_MASK) \ 504 == REFCLOCK_ADDR) 505 506 /* 507 * Macro for checking for invalid addresses. This is really, really 508 * gross, but is needed so no one configures a host on net 127 now that 509 * we're encouraging it the the configuration file. 510 */ 511 #define LOOPBACKADR 0x7f000001 512 #define LOOPNETMASK 0xff000000 513 514 #define ISBADADR(srcadr) (((SRCADR(srcadr) & LOOPNETMASK) \ 515 == (LOOPBACKADR & LOOPNETMASK)) \ 516 && (SRCADR(srcadr) != LOOPBACKADR)) 517 518 /* 519 * Utilities for manipulating addresses and port numbers 520 */ 521 #define NSRCADR(src) (((struct sockaddr_in *)src)->sin_addr.s_addr) /* address in net byte order */ 522 #define NSRCPORT(src) (((struct sockaddr_in *)src)->sin_port) /* port in net byte order */ 523 #define SRCADR(src) (ntohl(NSRCADR((src)))) /* address in host byte order */ 524 #define SRCPORT(src) (ntohs(NSRCPORT((src)))) /* host port */ 525 526 #define CAST_V4(src) ((struct sockaddr_in *)&(src)) 527 #define CAST_V6(src) ((struct sockaddr_in6 *)&(src)) 528 #define GET_INADDR(src) (CAST_V4(src)->sin_addr.s_addr) 529 #define GET_INADDR6(src) (CAST_V6(src)->sin6_addr) 530 531 #define SET_HOSTMASK(addr, family) \ 532 do { \ 533 memset((char *)(addr), 0, sizeof(struct sockaddr_storage)); \ 534 (addr)->ss_family = (family); \ 535 if ((family) == AF_INET) \ 536 GET_INADDR(*(addr)) = 0xffffffff; \ 537 else \ 538 memset(&GET_INADDR6(*(addr)), 0xff, \ 539 sizeof(struct in6_addr)); \ 540 } while(0) 541 542 /* 543 * NTP packet format. The mac field is optional. It isn't really 544 * an l_fp either, but for now declaring it that way is convenient. 545 * See Appendix A in the specification. 546 * 547 * Note that all u_fp and l_fp values arrive in network byte order 548 * and must be converted (except the mac, which isn't, really). 549 */ 550 struct pkt { 551 u_char li_vn_mode; /* leap indicator, version and mode */ 552 u_char stratum; /* peer stratum */ 553 u_char ppoll; /* peer poll interval */ 554 s_char precision; /* peer clock precision */ 555 u_fp rootdelay; /* distance to primary clock */ 556 u_fp rootdispersion; /* clock dispersion */ 557 u_int32 refid; /* reference clock ID */ 558 l_fp reftime; /* time peer clock was last updated */ 559 l_fp org; /* originate time stamp */ 560 l_fp rec; /* receive time stamp */ 561 l_fp xmt; /* transmit time stamp */ 562 563 #define LEN_PKT_NOMAC 12 * sizeof(u_int32) /* min header length */ 564 #define LEN_PKT_MAC LEN_PKT_NOMAC + sizeof(u_int32) 565 #define MIN_MAC_LEN 3 * sizeof(u_int32) /* DES */ 566 #define MAX_MAC_LEN 5 * sizeof(u_int32) /* MD5 */ 567 568 /* 569 * The length of the packet less MAC must be a multiple of 64 570 * with an RSA modulus and Diffie-Hellman prime of 64 octets 571 * and maximum host name of 128 octets, the maximum autokey 572 * command is 152 octets and maximum autokey response is 460 573 * octets. A packet can contain no more than one command and one 574 * response, so the maximum total extension field length is 672 575 * octets. But, to handle humungus certificates, the bank must 576 * be broke. 577 */ 578 #ifdef OPENSSL 579 u_int32 exten[NTP_MAXEXTEN / 4]; /* max extension field */ 580 #else /* OPENSSL */ 581 u_int32 exten[1]; /* misused */ 582 #endif /* OPENSSL */ 583 u_char mac[MAX_MAC_LEN]; /* mac */ 584 }; 585 586 /* 587 * Stuff for extracting things from li_vn_mode 588 */ 589 #define PKT_MODE(li_vn_mode) ((u_char)((li_vn_mode) & 0x7)) 590 #define PKT_VERSION(li_vn_mode) ((u_char)(((li_vn_mode) >> 3) & 0x7)) 591 #define PKT_LEAP(li_vn_mode) ((u_char)(((li_vn_mode) >> 6) & 0x3)) 592 593 /* 594 * Stuff for putting things back into li_vn_mode 595 */ 596 #define PKT_LI_VN_MODE(li, vn, md) \ 597 ((u_char)((((li) << 6) & 0xc0) | (((vn) << 3) & 0x38) | ((md) & 0x7))) 598 599 600 /* 601 * Dealing with stratum. 0 gets mapped to 16 incoming, and back to 0 602 * on output. 603 */ 604 #define PKT_TO_STRATUM(s) ((u_char)(((s) == (STRATUM_PKT_UNSPEC)) ?\ 605 (STRATUM_UNSPEC) : (s))) 606 607 #define STRATUM_TO_PKT(s) ((u_char)(((s) == (STRATUM_UNSPEC)) ?\ 608 (STRATUM_PKT_UNSPEC) : (s))) 609 610 /* 611 * Event codes. Used for reporting errors/events to the control module 612 */ 613 #define PEER_EVENT 0x080 /* this is a peer event */ 614 #define CRPT_EVENT 0x100 /* this is a crypto event */ 615 616 /* 617 * System event codes 618 */ 619 #define EVNT_UNSPEC 0 /* unspecified */ 620 #define EVNT_SYSRESTART 1 /* system restart */ 621 #define EVNT_SYSFAULT 2 /* wsystem or hardware fault */ 622 #define EVNT_SYNCCHG 3 /* new leap or synch change */ 623 #define EVNT_PEERSTCHG 4 /* new source or stratum */ 624 #define EVNT_CLOCKRESET 5 /* clock reset */ 625 #define EVNT_BADDATETIM 6 /* invalid time or date */ 626 #define EVNT_CLOCKEXCPT 7 /* reference clock exception */ 627 628 /* 629 * Peer event codes 630 */ 631 #define EVNT_PEERIPERR (1 | PEER_EVENT) /* IP error */ 632 #define EVNT_PEERAUTH (2 | PEER_EVENT) /* authentication failure */ 633 #define EVNT_UNREACH (3 | PEER_EVENT) /* change to unreachable */ 634 #define EVNT_REACH (4 | PEER_EVENT) /* change to reachable */ 635 #define EVNT_PEERCLOCK (5 | PEER_EVENT) /* clock exception */ 636 637 /* 638 * Clock event codes 639 */ 640 #define CEVNT_NOMINAL 0 /* unspecified */ 641 #define CEVNT_TIMEOUT 1 /* poll timeout */ 642 #define CEVNT_BADREPLY 2 /* bad reply format */ 643 #define CEVNT_FAULT 3 /* hardware or software fault */ 644 #define CEVNT_PROP 4 /* propagation failure */ 645 #define CEVNT_BADDATE 5 /* bad date format or value */ 646 #define CEVNT_BADTIME 6 /* bad time format or value */ 647 #define CEVNT_MAX CEVNT_BADTIME 648 649 /* 650 * Very misplaced value. Default port through which we send traps. 651 */ 652 #define TRAPPORT 18447 653 654 655 /* 656 * To speed lookups, peers are hashed by the low order bits of the 657 * remote IP address. These definitions relate to that. 658 */ 659 #define HASH_SIZE 128 660 #define HASH_MASK (HASH_SIZE-1) 661 #define HASH_ADDR(src) sock_hash(src) 662 663 /* 664 * How we randomize polls. The poll interval is a power of two. 665 * We chose a random value which is between 1/4 and 3/4 of the 666 * poll interval we would normally use and which is an even multiple 667 * of the EVENT_TIMEOUT. The random number routine, given an argument 668 * spread value of n, returns an integer between 0 and (1<<n)-1. This 669 * is shifted by EVENT_TIMEOUT and added to the base value. 670 */ 671 #if defined(HAVE_MRAND48) 672 # define RANDOM (mrand48()) 673 # define SRANDOM(x) (srand48(x)) 674 #else 675 # define RANDOM (random()) 676 # define SRANDOM(x) (srandom(x)) 677 #endif 678 679 #define RANDPOLL(x) ((1 << (x)) - 1 + (RANDOM & 0x3)) 680 #define RANDOM_SPREAD(poll) ((poll) - (EVENT_TIMEOUT+1)) 681 #define RANDOM_POLL(poll, rval) ((((rval)+1)<<EVENT_TIMEOUT) + (1<<((poll)-2))) 682 683 /* 684 * min, min3 and max. Makes it easier to transliterate the spec without 685 * thinking about it. 686 */ 687 #define min(a,b) (((a) < (b)) ? (a) : (b)) 688 #define max(a,b) (((a) > (b)) ? (a) : (b)) 689 #define min3(a,b,c) min(min((a),(b)), (c)) 690 691 692 /* 693 * Configuration items. These are for the protocol module (proto_config()) 694 */ 695 #define PROTO_BROADCLIENT 1 696 #define PROTO_PRECISION 2 /* (not used) */ 697 #define PROTO_AUTHENTICATE 3 698 #define PROTO_BROADDELAY 4 699 #define PROTO_AUTHDELAY 5 /* (not used) */ 700 #define PROTO_MULTICAST_ADD 6 701 #define PROTO_MULTICAST_DEL 7 702 #define PROTO_NTP 8 703 #define PROTO_KERNEL 9 704 #define PROTO_MONITOR 10 705 #define PROTO_FILEGEN 11 706 #define PROTO_PPS 12 707 #define PROTO_CAL 13 708 #define PROTO_MINCLOCK 14 709 #define PROTO_MINSANE 15 710 #define PROTO_FLOOR 16 711 #define PROTO_CEILING 17 712 #define PROTO_COHORT 18 713 #define PROTO_CALLDELAY 19 714 #define PROTO_ADJ 20 715 716 /* 717 * Configuration items for the loop filter 718 */ 719 #define LOOP_DRIFTINIT 1 /* set initial frequency offset */ 720 #define LOOP_DRIFTCOMP 2 /* set frequency offset */ 721 #define LOOP_MAX 3 /* set step offset */ 722 #define LOOP_PANIC 4 /* set panic offseet */ 723 #define LOOP_PHI 5 /* set dispersion rate */ 724 #define LOOP_MINSTEP 6 /* set step timeout */ 725 #define LOOP_MINPOLL 7 /* set min poll interval (log2 s) */ 726 #define LOOP_ALLAN 8 /* set minimum Allan intercept */ 727 #define LOOP_HUFFPUFF 9 /* set huff-n'-puff filter length */ 728 #define LOOP_FREQ 10 /* set initial frequency */ 729 730 /* 731 * Configuration items for the stats printer 732 */ 733 #define STATS_FREQ_FILE 1 /* configure drift file */ 734 #define STATS_STATSDIR 2 /* directory prefix for stats files */ 735 #define STATS_PID_FILE 3 /* configure ntpd PID file */ 736 737 #define MJD_1900 15020 /* MJD for 1 Jan 1900 */ 738 739 /* 740 * Default parameters. We use these in the absence of something better. 741 */ 742 #define DEFBROADDELAY 4e-3 /* default broadcast offset */ 743 #define INADDR_NTP 0xe0000101 /* NTP multicast address 224.0.1.1 */ 744 745 /* 746 * Structure used optionally for monitoring when this is turned on. 747 */ 748 struct mon_data { 749 struct mon_data *hash_next; /* next structure in hash list */ 750 struct mon_data *mru_next; /* next structure in MRU list */ 751 struct mon_data *mru_prev; /* previous structure in MRU list */ 752 u_long drop_count; /* dropped due RESLIMIT*/ 753 double avg_interval; /* average interpacket interval */ 754 u_long lasttime; /* interval since last packet */ 755 u_long count; /* total packet count */ 756 struct sockaddr_storage rmtadr; /* address of remote host */ 757 struct interface *interface; /* interface on which this arrived */ 758 u_short rmtport; /* remote port last came from */ 759 u_char mode; /* mode of incoming packet */ 760 u_char version; /* version of incoming packet */ 761 u_char cast_flags; /* flags MDF_?CAST */ 762 }; 763 764 /* 765 * Values for cast_flags 766 */ 767 #define MDF_UCAST 0x01 /* unicast */ 768 #define MDF_MCAST 0x02 /* multicast */ 769 #define MDF_BCAST 0x04 /* broadcast */ 770 #define MDF_LCAST 0x08 /* localcast */ 771 #define MDF_ACAST 0x10 /* manycast */ 772 #define MDF_BCLNT 0x20 /* broadcast client */ 773 #define MDF_ACLNT 0x40 /* manycast client */ 774 775 /* 776 * Values used with mon_enabled to indicate reason for enabling monitoring 777 */ 778 #define MON_OFF 0x00 /* no monitoring */ 779 #define MON_ON 0x01 /* monitoring explicitly enabled */ 780 #define MON_RES 0x02 /* implicit monitoring for RES_LIMITED */ 781 /* 782 * Structure used for restrictlist entries 783 */ 784 struct restrictlist { 785 struct restrictlist *next; /* link to next entry */ 786 u_int32 addr; /* Ipv4 host address (host byte order) */ 787 u_int32 mask; /* Ipv4 mask for address (host byte order) */ 788 u_long count; /* number of packets matched */ 789 u_short flags; /* accesslist flags */ 790 u_short mflags; /* match flags */ 791 }; 792 793 struct restrictlist6 { 794 struct restrictlist6 *next; /* link to next entry */ 795 struct in6_addr addr6; /* Ipv6 host address */ 796 struct in6_addr mask6; /* Ipv6 mask address */ 797 u_long count; /* number of packets matched */ 798 u_short flags; /* accesslist flags */ 799 u_short mflags; /* match flags */ 800 }; 801 802 803 /* 804 * Access flags 805 */ 806 #define RES_IGNORE 0x001 /* ignore packet */ 807 #define RES_DONTSERVE 0x002 /* access denied */ 808 #define RES_DONTTRUST 0x004 /* authentication required */ 809 #define RES_VERSION 0x008 /* version mismatch */ 810 #define RES_NOPEER 0x010 /* new association denied */ 811 #define RES_LIMITED 0x020 /* packet rate exceeded */ 812 813 #define RES_FLAGS (RES_IGNORE | RES_DONTSERVE |\ 814 RES_DONTTRUST | RES_VERSION |\ 815 RES_NOPEER | RES_LIMITED) 816 817 #define RES_NOQUERY 0x040 /* mode 6/7 packet denied */ 818 #define RES_NOMODIFY 0x080 /* mode 6/7 modify denied */ 819 #define RES_NOTRAP 0x100 /* mode 6/7 set trap denied */ 820 #define RES_LPTRAP 0x200 /* mode 6/7 low priority trap */ 821 822 #define RES_DEMOBILIZE 0x400 /* send kiss of death packet */ 823 #define RES_TIMEOUT 0x800 /* timeout this entry */ 824 825 #define RES_ALLFLAGS (RES_FLAGS | RES_NOQUERY |\ 826 RES_NOMODIFY | RES_NOTRAP |\ 827 RES_LPTRAP | RES_DEMOBILIZE |\ 828 RES_TIMEOUT) 829 830 /* 831 * Match flags 832 */ 833 #define RESM_INTERFACE 0x1 /* this is an interface */ 834 #define RESM_NTPONLY 0x2 /* match ntp port only */ 835 836 /* 837 * Restriction configuration ops 838 */ 839 #define RESTRICT_FLAGS 1 /* add flags to restrict entry */ 840 #define RESTRICT_UNFLAG 2 /* remove flags from restrict entry */ 841 #define RESTRICT_REMOVE 3 /* remove a restrict entry */ 842 843 /* 844 * Endpoint structure for the select algorithm 845 */ 846 struct endpoint { 847 double val; /* offset of endpoint */ 848 int type; /* interval entry/exit */ 849 }; 850 851 /* 852 * Defines for association matching 853 */ 854 #define AM_MODES 10 /* total number of modes */ 855 #define NO_PEER 0 /* action when no peer is found */ 856 857 /* 858 * Association matching AM[] return codes 859 */ 860 #define AM_ERR -1 861 #define AM_NOMATCH 0 862 #define AM_PROCPKT 1 863 #define AM_FXMIT 2 864 #define AM_MANYCAST 3 865 #define AM_NEWPASS 4 866 #define AM_NEWBCL 5 867 #define AM_POSSBCL 6 868 869 /* NetInfo configuration locations */ 870 #ifdef HAVE_NETINFO 871 #define NETINFO_CONFIG_DIR "/config/ntp" 872 #endif 873 874 #endif /* NTP_H */ 875