xref: /freebsd/contrib/ntp/include/mbg_gps166.h (revision 59c8e88e72633afbc47a4ace0d2170d00d51f7dc)
1 /*
2  * /src/NTP/REPOSITORY/ntp4-dev/include/mbg_gps166.h,v 4.7 2006/06/22 18:41:43 kardel RELEASE_20060622_A
3  *
4  * mbg_gps166.h,v 4.7 2006/06/22 18:41:43 kardel RELEASE_20060622_A
5  *
6  * $Created: Sun Jul 20 09:20:50 1997 $
7  *
8  * File GPSSERIO.H Copyright (c) by Meinberg Funkuhren (www.meinberg.de)
9  *
10  * Linkage to PARSE:
11  * Copyright (c) 1997-2005 by Frank Kardel <kardel <AT> ntp.org>
12  *
13  * Redistribution and use in source and binary forms, with or without
14  * modification, are permitted provided that the following conditions
15  * are met:
16  * 1. Redistributions of source code must retain the above copyright
17  *    notice, this list of conditions and the following disclaimer.
18  * 2. Redistributions in binary form must reproduce the above copyright
19  *    notice, this list of conditions and the following disclaimer in the
20  *    documentation and/or other materials provided with the distribution.
21  * 3. Neither the name of the author nor the names of its contributors
22  *    may be used to endorse or promote products derived from this software
23  *    without specific prior written permission.
24  *
25  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
26  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
27  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
28  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
29  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
33  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
34  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
35  * SUCH DAMAGE.
36  *
37  */
38 #ifndef MBG_GPS166_H
39 #define MBG_GPS166_H
40 
41 
42 /***************************************************************************
43  *
44  *  Definitions taken from Meinberg's gpsserio.h and gpsdefs.h files.
45  *
46  *  Author:  Martin Burnicki, Meinberg Funkuhren
47  *
48  *  Copyright (c) Meinberg Funkuhren, Bad Pyrmont, Germany
49  *
50  *  Description:
51  *    Structures and codes to be used to access Meinberg GPS clocks via
52  *    their serial interface COM0. COM0 should be set to a high baud rate,
53  *    default is 19200.
54  *
55  *    Standard Meinberg GPS serial operation is to send the Meinberg
56  *    standard time string automatically once per second, once per
57  *    minute, or on request per ASCII '?'.
58  *
59  *    GPS parameter setup or parameter readout uses blocks of binary
60  *    data which have to be isolated from the standard string. A block
61  *    of data starts with a SOH code (ASCII Start Of Header, 0x01)
62  *    followed by a message header with constant length and a block of
63  *    data with variable length.
64  *
65  *    The first field (cmd) of the message header holds the command
66  *    code resp. the type of data to be transmitted. The next field (len)
67  *    gives the number of data bytes that follow the header. This number
68  *    ranges from 0 to sizeof( MSG_DATA ). The third field (data_csum)
69  *    holds a checksum of all data bytes and the last field of the header
70  *    finally holds the checksum of the header itself.
71  *
72  ***************************************************************************/
73 
74 /**
75  * @brief GPS epoch bias from ordinary time_t epoch
76  *
77  * The Unix time_t epoch is usually 1970-01-01 00:00 whereas
78  * the GPS epoch is 1980-01-06 00:00, so the difference is 10 years,
79  * plus 2 days due to leap years (1972 and 1976), plus the difference
80  * of the day-of-month (6 - 1), so:<br>
81  *
82  * time_t t = ( gps_week * ::SECS_PER_WEEK ) + sec_of_week + ::GPS_SEC_BIAS
83  */
84 #define GPS_SEC_BIAS   315964800UL     // ( ( ( 10UL * 365UL ) + 2 + 5 ) * SECS_PER_DAY )
85 
86 
87 #ifndef _COM_HS_DEFINED
88   /**
89    * @brief Enumeration of handshake modes
90    */
91   enum COM_HANSHAKE_MODES { HS_NONE, HS_XONXOFF, HS_RTSCTS, N_COM_HS };
92   #define _COM_HS_DEFINED
93 #endif
94 
95 #ifndef _COM_PARM_DEFINED
96   /**
97    * @brief A data type to configure a serial port's baud rate
98    *
99    * @see ::MBG_BAUD_RATES
100    */
101   typedef int32_t BAUD_RATE;
102 
103   /**
104    * @brief Indices used to identify a parameter in the framing string
105    *
106    * @see ::MBG_FRAMING_STRS
107    */
108   enum MBG_FRAMING_STR_IDXS { F_DBITS, F_PRTY, F_STBITS };
109 
110   /**
111    * @brief A structure to store the configuration of a serial port
112    */
113   typedef struct
114   {
115     BAUD_RATE baud_rate;  ///< transmission speed, e.g. 19200L, see ::MBG_BAUD_RATES
116     char framing[4];      ///< ASCIIZ framing string, e.g. "8N1" or "7E2", see ::MBG_FRAMING_STRS
117     int16_t handshake;    ///< handshake mode, yet only ::HS_NONE supported
118 
119   } COM_PARM;
120 
121   #define _COM_PARM_DEFINED
122 #endif
123 
124 
125 /**
126  * @brief Enumeration of modes supported for time string transmission
127  *
128  * This determines e.g. at which point in time a string starts
129  * to be transmitted via the serial port.
130  * Used with ::PORT_SETTINGS::mode.
131  *
132  * @see ::STR_MODE_MASKS
133  */
134 enum STR_MODES
135 {
136   STR_ON_REQ,     ///< transmission on request by received '?' character only
137   STR_PER_SEC,    ///< transmission automatically if second changes
138   STR_PER_MIN,    ///< transmission automatically if minute changes
139   STR_AUTO,       ///< transmission automatically if required, e.g. on capture event
140   STR_ON_REQ_SEC, ///< transmission if second changes and a request has been received before
141   N_STR_MODE      ///< the number of known modes
142 };
143 
144 
145 /**
146  * The number of serial ports which are at least available
147  * even with very old GPS receiver models. For devices providing
148  * a ::RECEIVER_INFO structure the number of provided COM ports
149  * is available in ::RECEIVER_INFO::n_com_ports.
150  */
151 #define DEFAULT_N_COM   2
152 
153 
154 /**
155  * @brief A The structure used to store the configuration of two serial ports
156  *
157  * @deprecated This structure is deprecated, ::PORT_SETTINGS and related structures
158  * should be used instead, if supported by the device.
159  */
160 typedef struct
161 {
162   COM_PARM com[DEFAULT_N_COM];    ///< COM0 and COM1 settings
163   uint8_t mode[DEFAULT_N_COM];    ///< COM0 and COM1 output mode
164 
165 } PORT_PARM;
166 
167 
168 /**
169  * @brief The type of a GPS command code
170  *
171  * @see ::GPS_CMD_CODES
172  */
173 typedef uint16_t GPS_CMD;
174 
175 
176 /**
177  * @brief Control codes to be or'ed with a particular command/type code
178  */
179 enum GPS_CMD_CTRL_CODES
180 {
181   GPS_REQACK = 0x8000,   ///< to device: request acknowledge
182   GPS_ACK    = 0x4000,   ///< from device: acknowledge a command
183   GPS_NACK   = 0x2000,   ///< from device: error evaluating a command
184 };
185 
186 #define GPS_CTRL_MSK  0xF000   ///< bit mask of all ::GPS_CMD_CTRL_CODES
187 
188 
189 /**
190  * @brief Command codes for the binary protocol
191  *
192  * These codes specify commands and associated data types used by Meinberg's
193  * binary protocol to exchange data with a device via serial port, direct USB,
194  * or socket I/O.
195  *
196  * Some commands and associated data structures can be read (r) from a device, others
197  * can be written (w) to the device, and some can also be sent automatically (a) by
198  * a device after a ::GPS_AUTO_ON command has been sent to the device.
199  * The individual command codes are marked with (rwa) accordingly, where '-' is used
200  * to indicate that a particular mode is not supported.
201  *
202  * @note Not all command code are supported by all devices.
203  * See the hints for a particular command.
204  *
205  * @note If ::GPS_ALM, ::GPS_EPH or a code named ..._IDX is sent to retrieve
206  * some data from a device then an uint16_t parameter must be also supplied
207  * in order to specify the index number of the data set to be returned.
208  * The valid index range depends on the command code.
209  * For ::GPS_ALM and ::GPS_EPH the index is the SV number which may be 0 or
210  * ::MIN_SVNO_GPS to ::MAX_SVNO_GPS. If the number is 0 then all ::N_SVNO_GPS
211  * almanacs or ephemeris data structures are returned.
212  *
213  * @see ::GPS_CMD_CODES_TABLE
214  */
215 enum GPS_CMD_CODES
216 { /* system data */
217   GPS_AUTO_ON = 0x000,  ///< (-w-) no data, enable auto-msgs from device
218   GPS_AUTO_OFF,         ///< (-w-) no data, disable auto-msgs from device
219   GPS_SW_REV,           ///< (r--) deprecated, ::SW_REV, software revision, use only if ::GPS_RECEIVER_INFO not supp.
220   GPS_BVAR_STAT,        ///< (r--) ::BVAR_STAT, status of buffered variables, only if ::GPS_MODEL_HAS_BVAR_STAT
221   GPS_TIME,             ///< (-wa) ::TTM, current time or capture, or init board time
222   GPS_POS_XYZ,          ///< (rw-) ::XYZ, current position in ECEF coordinates, only if ::GPS_MODEL_HAS_POS_XYZ
223   GPS_POS_LLA,          ///< (rw-) ::LLA, current position in geographic coordinates, only if ::GPS_MODEL_HAS_POS_LLA
224   GPS_TZDL,             ///< (rw-) ::TZDL, time zone / daylight saving, only if ::GPS_MODEL_HAS_TZDL
225   GPS_PORT_PARM,        ///< (rw-) deprecated, ::PORT_PARM, use ::PORT_SETTINGS etc. if ::GPS_RECEIVER_INFO supported
226   GPS_SYNTH,            ///< (rw-) ::SYNTH, synthesizer settings, only if ::GPS_HAS_SYNTH
227   GPS_ANT_INFO,         ///< (r-a) ::ANT_INFO, time diff after antenna disconnect, only if ::GPS_MODEL_HAS_ANT_INFO
228   GPS_UCAP,             ///< (r-a) ::TTM, user capture events, only if ::RECEIVER_INFO::n_ucaps > 0
229 
230   /* GPS data */
231   GPS_CFGH = 0x100,     ///< (rw-) ::CFGH, SVs' configuration and health codes
232   GPS_ALM,              ///< (rw-) req: uint16_t SV num, ::SV_ALM, one SV's almanac
233   GPS_EPH,              ///< (rw-) req: uint16_t SV num, ::SV_EPH, one SV's ephemeris
234   GPS_UTC,              ///< (rw-) ::UTC, GPS %UTC correction parameters
235   GPS_IONO,             ///< (rw-) ::IONO, GPS ionospheric correction parameters
236   GPS_ASCII_MSG         ///< (r--) ::ASCII_MSG, the GPS ASCII message
237 };
238 
239 
240 #ifndef _CSUM_DEFINED
241   typedef uint16_t CSUM;  /* checksum used by some structures stored in non-volatile memory */
242   #define _CSUM_DEFINED
243 #endif
244 
245 
246 /**
247  * @brief The header of a binary message.
248  */
249 typedef struct
250 {
251   GPS_CMD cmd;      ///< see ::GPS_CMD_CODES
252   uint16_t len;     ///< length of the data portion appended after the header
253   CSUM data_csum;   ///< checksum of the data portion appended after the header
254   CSUM hdr_csum;    ///< checksum of the preceding header bytes
255 
256 } GPS_MSG_HDR;
257 
258 
259 #define GPS_ID_STR_LEN      16
260 #define GPS_ID_STR_SIZE     ( GPS_ID_STR_LEN + 1 )
261 
262 /**
263  * @brief Software revision information
264  *
265  * Contains a software revision code, plus an optional
266  * identifier for a customized version.
267  */
268 typedef struct
269 {
270   uint16_t code;               ///< Version number, e.g. 0x0120 means v1.20
271   char name[GPS_ID_STR_SIZE];  ///< Optional string identifying a customized version
272   uint8_t reserved;            ///< Reserved field to yield even structure size
273 
274 } SW_REV;
275 
276 
277 /**
278  * @brief GNSS satellite numbers
279  *
280  * @todo: Check if MAX_SVNO_GLN is 94 instead of 95, and thus
281  *        N_SVNO_GLN is 30 instead of 31, as reported by Wikipedia.
282  */
283 enum GNSS_SVNOS
284 {
285   MIN_SVNO_GPS = 1,       ///< min. GPS satellite PRN number
286   MAX_SVNO_GPS = 32,      ///< max. GPS satellite PRN number
287   N_SVNO_GPS = 32,        ///< max. number of active GPS satellites
288 
289   MIN_SVNO_WAAS = 33,     ///< min. WAAS satellite number
290   MAX_SVNO_WAAS = 64,     ///< max. WAAS satellite number
291   N_SVNO_WAAS = 32,       ///< max. number of active WAAS satellites
292 
293   MIN_SVNO_GLONASS = 65,  ///< min. Glonass satellite number (64 + sat slot ID)
294   MAX_SVNO_GLONASS = 95,  ///< max. Glonass satellite number (64 + sat slot ID)
295   N_SVNO_GLONASS = 31     ///< max. number of active Glonass satellites
296 };
297 
298 
299 typedef uint16_t SVNO;    ///< the number of an SV (Space Vehicle, i.e. satellite)
300 typedef uint16_t HEALTH;  ///< an SV's 6 bit health code
301 typedef uint16_t CFG;     ///< an SV's 4 bit configuration code
302 typedef uint16_t IOD;     ///< Issue-Of-Data code
303 
304 
305 /**
306  * @brief Status flags of battery buffered data
307  *
308  * Related to data received from the satellites, or data derived thereof.
309  *
310  * All '0' means OK, single bits set to '1' indicate
311  * the associated type of GPS data is not available.
312  *
313  * @see ::BVAR_FLAGS
314  */
315 typedef uint16_t BVAR_STAT;
316 
317 #define _mbg_swab_bvar_stat( _p )  _mbg_swab16( (_p) )
318 
319 
320 /**
321  * @brief Enumeration of flag bits used to define ::BVAR_FLAGS
322  *
323  * For each bit which is set this means the associated data set in
324  * non-volatile memory is not available, or incomplete.
325  * Most data sets will just be re-collected from the data streams sent
326  * by the satellites. However, the receiver position has usually been
327  * computed earlier during normal operation, and will be re-computed
328  * when a sufficient number of satellites can be received.
329  *
330  * @see ::BVAR_STAT
331  * @see ::BVAR_FLAGS
332  * @see ::BVAR_FLAG_NAMES
333  */
334 enum BVAR_FLAG_BITS
335 {
336   BVAR_BIT_CFGH_INVALID,      ///< Satellite configuration and health parameters incomplete
337   BVAR_BIT_ALM_NOT_COMPLETE,  ///< Almanac parameters incomplete
338   BVAR_BIT_UTC_INVALID,       ///< %UTC offset parameters incomplete
339   BVAR_BIT_IONO_INVALID,      ///< Ionospheric correction parameters incomplete
340   BVAR_BIT_RCVR_POS_INVALID,  ///< No valid receiver position available
341   N_BVAR_BIT                  ///< number of defined ::BVAR_STAT bits
342 };
343 
344 
345 /**
346  * @brief Bit masks associated with ::BVAR_FLAG_BITS
347  *
348  * Used with ::BVAR_STAT.
349  *
350  * @see ::BVAR_STAT
351  * @see ::BVAR_FLAG_BITS
352  * @see ::BVAR_FLAG_NAMES
353  */
354 enum BVAR_FLAGS
355 {
356   BVAR_CFGH_INVALID     = ( 1UL << BVAR_BIT_CFGH_INVALID ),      ///< see ::BVAR_BIT_CFGH_INVALID
357   BVAR_ALM_NOT_COMPLETE = ( 1UL << BVAR_BIT_ALM_NOT_COMPLETE ),  ///< see ::BVAR_BIT_ALM_NOT_COMPLETE
358   BVAR_UTC_INVALID      = ( 1UL << BVAR_BIT_UTC_INVALID ),       ///< see ::BVAR_BIT_UTC_INVALID
359   BVAR_IONO_INVALID     = ( 1UL << BVAR_BIT_IONO_INVALID ),      ///< see ::BVAR_BIT_IONO_INVALID
360   BVAR_RCVR_POS_INVALID = ( 1UL << BVAR_BIT_RCVR_POS_INVALID ),  ///< see ::BVAR_BIT_RCVR_POS_INVALID
361 };
362 
363 
364 /**
365  * @brief A structure used to hold time in GPS format
366  *
367  * Date and time refer to the linear time scale defined by GPS, with
368  * the epoch starting at %UTC midnight at the beginning of January 6, 1980.
369  *
370  * GPS time is counted by the week numbers since the epoch, plus second
371  * of the week, plus fraction of the second. The week number transmitted
372  * by the satellites rolls over from 1023 to 0, but Meinberg devices
373  * just continue to count the weeks beyond the 1024 week limit to keep
374  * the receiver's internal time.
375  *
376  * %UTC time differs from GPS time since a number of leap seconds have
377  * been inserted in the %UTC time scale after the GPS epoche. The number
378  * of leap seconds is disseminated by the satellites using the ::UTC
379  * parameter set, which also provides info on pending leap seconds.
380  */
381 typedef struct
382 {
383   uint16_t wn;     ///< the week number since GPS has been installed
384   uint32_t sec;    ///< the second of that week
385   uint32_t tick;   ///< fractions of a second, 1/::RECEIVER_INFO::ticks_per_sec units
386 
387 } T_GPS;
388 
389 
390 /**
391  * @brief Local date and time computed from GPS time
392  *
393  * The current number of leap seconds have to be added to get %UTC
394  * from GPS time. Additional corrections could have been made according
395  * to the time zone/daylight saving parameters ::TZDL defined by the user.
396  * The status field can be checked to see which corrections
397  * have actually been applied.
398  *
399  * @note Conversion from GPS time to %UTC and/or local time can only be
400  * done if some valid ::UTC correction parameters are available in the
401  * receiver's non-volatile memory.
402  */
403 typedef struct
404 {
405   int16_t year;           ///< year number, 0..9999
406   int8_t month;           ///< month, 1..12
407   int8_t mday;            ///< day of month, 1..31
408   int16_t yday;           ///< day of year, 1..365, or 366 in case of leap year
409   int8_t wday;            ///< day of week, 0..6 == Sun..Sat
410   int8_t hour;            ///< hours, 0..23
411   int8_t min;             ///< minutes, 0..59
412   int8_t sec;             ///< seconds, 0..59, or 60 in case of inserted leap second
413   int32_t frac;           ///< fractions of a second, 1/::RECEIVER_INFO::ticks_per_sec units
414   int32_t offs_from_utc;  ///< local time offset from %UTC [sec]
415   uint16_t status;        ///< status flags, see ::TM_GPS_STATUS_BIT_MASKS
416 
417 } TM_GPS;
418 
419 
420 
421 /**
422  * @brief Status flag bits used to define ::TM_GPS_STATUS_BIT_MASKS
423  *
424  * These bits report info on the time conversion from GPS time to %UTC
425  * and/or local time as well as device status info.
426  *
427  * @see ::TM_GPS_STATUS_BIT_MASKS
428  */
429 enum TM_GPS_STATUS_BITS
430 {
431   TM_BIT_UTC,          ///< %UTC correction has been made
432   TM_BIT_LOCAL,        ///< %UTC has been converted to local time according to ::TZDL settings
433   TM_BIT_DL_ANN,       ///< state of daylight saving is going to change
434   TM_BIT_DL_ENB,       ///< daylight saving is in effect
435   TM_BIT_LS_ANN,       ///< leap second pending
436   TM_BIT_LS_ENB,       ///< current second is leap second
437   TM_BIT_LS_ANN_NEG,   ///< set in addition to ::TM_BIT_LS_ANN if leap sec is negative
438   TM_BIT_INVT,         ///< invalid time, e.g. if RTC battery bas been empty
439 
440   TM_BIT_EXT_SYNC,     ///< synchronized externally
441   TM_BIT_HOLDOVER,     ///< in holdover mode after previous synchronization
442   TM_BIT_ANT_SHORT,    ///< antenna cable short circuited
443   TM_BIT_NO_WARM,      ///< OCXO has not warmed up
444   TM_BIT_ANT_DISCONN,  ///< antenna currently disconnected
445   TM_BIT_SYN_FLAG,     ///< TIME_SYN output is low
446   TM_BIT_NO_SYNC,      ///< time sync actually not verified
447   TM_BIT_NO_POS        ///< position actually not verified, LOCK LED off
448 };
449 
450 
451 /**
452  * @brief Status flag masks used with ::TM_GPS::status
453  *
454  * These bits report info on the time conversion from GPS time to %UTC
455  * and/or local time as well as device status info.
456  *
457  * @see ::TM_GPS_STATUS_BITS
458  */
459 enum TM_GPS_STATUS_BIT_MASKS
460 {
461   TM_UTC         = ( 1UL << TM_BIT_UTC ),          ///< see ::TM_BIT_UTC
462   TM_LOCAL       = ( 1UL << TM_BIT_LOCAL ),        ///< see ::TM_BIT_LOCAL
463   TM_DL_ANN      = ( 1UL << TM_BIT_DL_ANN ),       ///< see ::TM_BIT_DL_ANN
464   TM_DL_ENB      = ( 1UL << TM_BIT_DL_ENB ),       ///< see ::TM_BIT_DL_ENB
465   TM_LS_ANN      = ( 1UL << TM_BIT_LS_ANN ),       ///< see ::TM_BIT_LS_ANN
466   TM_LS_ENB      = ( 1UL << TM_BIT_LS_ENB ),       ///< see ::TM_BIT_LS_ENB
467   TM_LS_ANN_NEG  = ( 1UL << TM_BIT_LS_ANN_NEG ),   ///< see ::TM_BIT_LS_ANN_NEG
468   TM_INVT        = ( 1UL << TM_BIT_INVT ),         ///< see ::TM_BIT_INVT
469 
470   TM_EXT_SYNC    = ( 1UL << TM_BIT_EXT_SYNC ),     ///< see ::TM_BIT_EXT_SYNC
471   TM_HOLDOVER    = ( 1UL << TM_BIT_HOLDOVER ),     ///< see ::TM_BIT_HOLDOVER
472   TM_ANT_SHORT   = ( 1UL << TM_BIT_ANT_SHORT ),    ///< see ::TM_BIT_ANT_SHORT
473   TM_NO_WARM     = ( 1UL << TM_BIT_NO_WARM ),      ///< see ::TM_BIT_NO_WARM
474   TM_ANT_DISCONN = ( 1UL << TM_BIT_ANT_DISCONN ),  ///< see ::TM_BIT_ANT_DISCONN
475   TM_SYN_FLAG    = ( 1UL << TM_BIT_SYN_FLAG ),     ///< see ::TM_BIT_SYN_FLAG
476   TM_NO_SYNC     = ( 1UL << TM_BIT_NO_SYNC ),      ///< see ::TM_BIT_NO_SYNC
477   TM_NO_POS      = ( 1UL << TM_BIT_NO_POS )        ///< see ::TM_BIT_NO_POS
478 };
479 
480 
481 /**
482  * @brief A structure used to transmit information on date and time
483  *
484  * This structure can be used to transfer the current time, in which
485  * case the channel field has to be set to -1, or an event capture time
486  * retrieved from the on-board FIFO, in which case the channel field
487  * contains the index of the time capture input, e.g. 0 or 1.
488  */
489 typedef struct
490 {
491   int16_t channel;  ///< -1: the current on-board time; >= 0 the capture channel number
492   T_GPS t;          ///< time in GPS scale and format
493   TM_GPS tm;        ///< time converted to %UTC and/or local time according to ::TZDL settings
494 
495 } TTM;
496 
497 
498 
499 /* Two types of variables used to store a position. Type XYZ is */
500 /* used with a position in earth centered, earth fixed (ECEF) */
501 /* coordinates whereas type LLA holds such a position converted */
502 /* to geographic coordinates as defined by WGS84 (World Geodetic */
503 /* System from 1984). */
504 
505 /**
506  * @brief Sequence and number of components of a cartesian position
507  */
508 enum XYZ_FIELDS { XP, YP, ZP, N_XYZ };  // x, y, z
509 
510 /**
511  * @brief A position in cartesian coordinates
512  *
513  * Usually earth centered, earth fixed (ECEF) coordinates,
514  * in [m].
515  *
516  * @note In the original code this is an array of double.
517  *
518  * @see ::XYZ_FIELDS
519  */
520 typedef l_fp XYZ[N_XYZ];
521 
522 
523 /**
524  * @brief Sequence and number of components of a geographic position
525  */
526 enum LLA_FIELDS { LAT, LON, ALT, N_LLA };  /* latitude, longitude, altitude */
527 
528 /**
529  * @brief A geographic position based on latitude, longitude, and altitude
530  *
531  * The geographic position associated to specific cartesian coordinates
532  * depends on the characteristics of the ellipsoid used for the computation,
533  * the so-called geographic datum. GPS uses the WGS84 (World Geodetic System
534  * from 1984) ellipsoid by default.
535  *
536  * lon, lat in [rad], alt in [m]
537  *
538  * @note In the original code this is an array of double.
539  *
540  * @see ::LLA_FIELDS
541  */
542 typedef l_fp LLA[N_LLA];
543 
544 
545 /**
546  * @defgroup group_synth Synthesizer parameters
547  *
548  * Synthesizer frequency is expressed as a
549  * four digit decimal number (freq) to be multiplied by 0.1 Hz and an
550  * base 10 exponent (range). If the effective frequency is less than
551  * 10 kHz its phase is synchronized corresponding to the variable phase.
552  * Phase may be in a range from -360 deg to +360 deg with a resolution
553  * of 0.1 deg, so the resulting numbers to be stored are in a range of
554  * -3600 to +3600.
555  *
556  * Example:<br>
557  * Assume the value of freq is 2345 (decimal) and the value of phase is 900.
558  * If range == 0 the effective frequency is 234.5 Hz with a phase of +90 deg.
559  * If range == 1 the synthesizer will generate a 2345 Hz output frequency
560  * and so on.
561  *
562  * Limitations:<br>
563  * If freq == 0 the synthesizer is disabled. If range == 0 the least
564  * significant digit of freq is limited to 0, 3, 5 or 6. The resulting
565  * frequency is shown in the examples below:
566  *    - freq == 1230  -->  123.0 Hz
567  *    - freq == 1233  -->  123 1/3 Hz (real 1/3 Hz, NOT 123.3 Hz)
568  *    - freq == 1235  -->  123.5 Hz
569  *    - freq == 1236  -->  123 2/3 Hz (real 2/3 Hz, NOT 123.6 Hz)
570  *
571  * If range == ::MAX_SYNTH_RANGE the value of freq must not exceed 1000, so
572  * the output frequency is limited to 10 MHz (see ::MAX_SYNTH_FREQ_VAL).
573  *
574  * @{ */
575 
576 #define N_SYNTH_FREQ_DIGIT  4    ///< number of digits to edit
577 #define MAX_SYNTH_FREQ   1000    ///< if range == ::MAX_SYNTH_RANGE
578 
579 #define MIN_SYNTH_RANGE     0
580 #define MAX_SYNTH_RANGE     5
581 #define N_SYNTH_RANGE       ( MAX_SYNTH_RANGE - MIN_SYNTH_RANGE + 1 )
582 
583 #define N_SYNTH_PHASE_DIGIT  4
584 #define MAX_SYNTH_PHASE      3600
585 
586 
587 #define MAX_SYNTH_FREQ_EDIT  9999  ///< max sequence of digits when editing
588 
589 
590 /**
591  * @brief The maximum frequency that can be configured for the synthesizer
592  */
593 #define MAX_SYNTH_FREQ_VAL   10000000UL     ///< 10 MHz
594 /*   == MAX_SYNTH_FREQ * 10^(MAX_SYNTH_RANGE-1) */
595 
596 /**
597  * @brief The synthesizer's phase is only be synchronized if the frequency is below this limit
598  */
599 #define SYNTH_PHASE_SYNC_LIMIT   10000UL    ///< 10 kHz
600 
601 /**
602  * A Macro used to determine the position of the decimal point
603  * when printing the synthesizer frequency as 4 digit value
604  */
605 #define _synth_dp_pos_from_range( _r ) \
606   ( ( ( N_SYNTH_RANGE - (_r) ) % ( N_SYNTH_FREQ_DIGIT - 1 ) ) + 1 )
607 
608 /**
609  * @brief Synthesizer frequency units
610  *
611  * An initializer for commonly displayed synthesizer frequency units
612  * (::N_SYNTH_RANGE strings)
613  */
614 #define DEFAULT_FREQ_RANGES \
615 {                           \
616   "Hz",                     \
617   "kHz",                    \
618   "kHz",                    \
619   "kHz",                    \
620   "MHz",                    \
621   "MHz",                    \
622 }
623 
624 
625 
626 /**
627  * @brief Synthesizer configuration parameters
628  */
629 typedef struct
630 {
631   int16_t freq;    ///< four digits used; scale: 0.1 Hz; e.g. 1234 -> 123.4 Hz
632   int16_t range;   ///< scale factor for freq; 0..::MAX_SYNTH_RANGE
633   int16_t phase;   ///< -::MAX_SYNTH_PHASE..+::MAX_SYNTH_PHASE; >0 -> pulses later
634 
635 } SYNTH;
636 
637 #define _mbg_swab_synth( _p )   \
638 {                               \
639   _mbg_swab16( &(_p)->freq );   \
640   _mbg_swab16( &(_p)->range );  \
641   _mbg_swab16( &(_p)->phase );  \
642 }
643 
644 
645 /**
646  * @brief Enumeration of synthesizer states
647  */
648 enum SYNTH_STATES
649 {
650   SYNTH_DISABLED,   ///< disbled by cfg, i.e. freq == 0.0
651   SYNTH_OFF,        ///< not enabled after power-up
652   SYNTH_FREE,       ///< enabled, but not synchronized
653   SYNTH_DRIFTING,   ///< has initially been sync'd, but now running free
654   SYNTH_SYNC,       ///< fully synchronized
655   N_SYNTH_STATE     ///< the number of known states
656 };
657 
658 
659 /**
660  * @brief A structure used to report the synthesizer state
661  */
662 typedef struct
663 {
664   uint8_t state;     ///< state code as enumerated in ::SYNTH_STATES
665   uint8_t flags;     ///< reserved, currently always 0
666 
667 } SYNTH_STATE;
668 
669 #define _mbg_swab_synth_state( _p )  _nop_macro_fnc()
670 
671 #define SYNTH_FLAG_PHASE_IGNORED  0x01
672 
673 /** @} defgroup group_synth */
674 
675 
676 
677 /**
678  * @defgroup group_tzdl Time zone / daylight saving parameters
679  *
680  * Example: <br>
681  * For automatic daylight saving enable/disable in Central Europe,
682  * the variables are to be set as shown below: <br>
683  *   - offs = 3600L           one hour from %UTC
684  *   - offs_dl = 3600L        one additional hour if daylight saving enabled
685  *   - tm_on = first Sunday from March 25, 02:00:00h ( year |= ::DL_AUTO_FLAG )
686  *   - tm_off = first Sunday from October 25, 03:00:00h ( year |= ::DL_AUTO_FLAG )
687  *   - name[0] == "CET  "     name if daylight saving not enabled
688  *   - name[1] == "CEST "     name if daylight saving is enabled
689  *
690  * @{ */
691 
692 /**
693  * @brief The name of a time zone
694  *
695  * @note Up to 5 printable characters, plus trailing zero
696  */
697 typedef char TZ_NAME[6];
698 
699 /**
700  * @brief Time zone / daylight saving parameters
701  *
702  * This structure is used to specify how a device converts on-board %UTC
703  * to local time, including computation of beginning and end of daylight
704  * saving time (DST), if required.
705  *
706  * @note The ::TZDL structure contains members of type ::TM_GPS to specify
707  * the times for beginning and end of DST. However, the ::TM_GPS::frac,
708  * ::TM_GPS::offs_from_utc, and ::TM_GPS::status fields of these ::TZDL::tm_on
709  * and ::TZDL::tm_off members are ignored for the conversion to local time,
710  * and thus should be 0.
711  */
712 typedef struct
713 {
714   int32_t offs;      ///< standard offset from %UTC to local time [sec]
715   int32_t offs_dl;   ///< additional offset if daylight saving enabled [sec]
716   TM_GPS tm_on;      ///< date/time when daylight saving starts
717   TM_GPS tm_off;     ///< date/time when daylight saving ends
718   TZ_NAME name[2];   ///< names without and with daylight saving enabled
719 
720 } TZDL;
721 
722 /**
723  * @brief A flag indicating automatic computation of DST
724  *
725  * If this flag is or'ed to the year numbers in ::TZDL::tm_on and ::TZDL::tm_off
726  * then daylight saving is computed automatically year by year.
727  */
728 #define DL_AUTO_FLAG  0x8000
729 
730 /** @} defgroup group_tzdl */
731 
732 
733 
734 /**
735  * @brief Antenna status and error at reconnect information
736  *
737  * The structure below reflects the status of the antenna,
738  * the times of last disconnect/reconnect, and the board's
739  * clock offset when it has synchronized again after the
740  * disconnection interval.
741  *
742  * @note ::ANT_INFO::status changes back to ::ANT_RECONN only
743  * after the antenna has been reconnected <b>and</b> the
744  * receiver has re-synchronized to the satellite signal.
745  * In this case ::ANT_INFO::delta_t reports the time offset
746  * before resynchronization, i.e. how much the internal
747  * time has drifted while the antenna was disconnected.
748  */
749 typedef struct
750 {
751   int16_t status;      ///< current status of antenna, see ::ANT_STATUS_CODES
752   TM_GPS tm_disconn;   ///< time of antenna disconnect
753   TM_GPS tm_reconn;    ///< time of antenna reconnect
754   int32_t delta_t;     ///< clock offs at reconn. time in 1/::RECEIVER_INFO::ticks_per_sec units
755 
756 } ANT_INFO;
757 
758 
759 /**
760  * @brief Status code used with ::ANT_INFO::status
761  */
762 enum ANT_STATUS_CODES
763 {
764   ANT_INVALID,   ///< No other fields valid since antenna has not yet been disconnected
765   ANT_DISCONN,   ///< Antenna is disconnected, tm_reconn and delta_t not yet set
766   ANT_RECONN,    ///< Antenna has been disconnect, and receiver sync. after reconnect, so all fields valid
767   N_ANT_STATUS_CODES  ///< the number of known status codes
768 };
769 
770 
771 
772 /**
773  * @brief Summary of configuration and health data of all satellites
774  */
775 typedef struct
776 {
777   CSUM csum;                  ///< checksum of the remaining bytes
778   int16_t valid;              ///< flag data are valid
779 
780   T_GPS tot_51;               ///< time of transmission, page 51
781   T_GPS tot_63;               ///< time of transmission, page 63
782   T_GPS t0a;                  ///< complete reference time almanac
783 
784   CFG cfg[N_SVNO_GPS];        ///< 4 bit SV configuration code from page 63
785   HEALTH health[N_SVNO_GPS];  ///< 6 bit SV health codes from pages 51, 63
786 
787 } CFGH;
788 
789 
790 
791 /**
792  * @brief GPS %UTC correction parameters
793  *
794  * %UTC correction parameters basically as sent by the GPS satellites.
795  *
796  * The csum field is only used by the card's firmware to check the
797  * consistency of the structure in non-volatile memory.
798  *
799  * The field labeled valid indicates if the parameter set is valid, i.e.
800  * if it contains data received from the satellites.
801  *
802  * t0t, A0 and A1 contain fractional correction parameters for the current
803  * GPS-%UTC time offset in addition to the whole seconds. This is evaluated
804  * by the receivers' firmware to convert GPS time to %UTC time.
805  *
806  * The delta_tls field contains the current full seconds offset between
807  * GPS time and %UTC, which corresponds to the number of leap seconds inserted
808  * into the %UTC time scale since GPS was put into operation in January 1980.
809  *
810  * delta_tlfs holds the number of "future" leap seconds, i.e. the %UTC offset
811  * after the next leap second event defined by WNlsf and DNt.
812  *
813  * The fields WNlsf and DNt specify the GPS week number and the day number
814  * in that week for the end of which a leap second has been scheduled.
815  *
816  * @note: The satellites transmit WNlsf only as a signed 8 bit value, so it
817  * can only define a point in time which is +/- 127 weeks off the current time.
818  * The firmware tries to expand this based on the current week number, but
819  * the result is ambiguous if the leap second occurs or occurred more
820  * than 127 weeks in the future or past.
821  *
822  * So the leap second date should <b>only</b> be evaluated and displayed
823  * in a user interface if the fields delta_tls and delta_tlsf have
824  * different values, in which case there is indeed a leap second announcement
825  * inside the +/- 127 week range.
826  *
827  * @note In the original code the type of A0 and A1 is double.
828  */
829 typedef struct
830 {
831   CSUM csum;          ///<  Checksum of the remaining bytes
832   int16_t valid;      ///<  Flag indicating %UTC parameters are valid
833 
834   T_GPS t0t;          ///<  Reference Time %UTC Parameters [wn|sec]
835   l_fp A0;            ///<  +- Clock Correction Coefficient 0 [sec]
836   l_fp A1;            ///<  +- Clock Correction Coefficient 1 [sec/sec]
837 
838   uint16_t WNlsf;     ///<  Week number of nearest leap second
839   int16_t DNt;        ///<  The day number at the end of which a leap second occurs
840   int8_t delta_tls;   ///<  Current %UTC offset to GPS system time [sec]
841   int8_t delta_tlsf;  ///<  Future %UTC offset to GPS system time after next leap second transition [sec]
842 
843 } UTC;
844 
845 
846 /**
847  * @brief GPS ASCII message
848  */
849 typedef struct
850 {
851   CSUM csum;       ///< checksum of the remaining bytes */
852   int16_t valid;   ///< flag data are valid
853   char s[23];      ///< 22 chars GPS ASCII message plus trailing zero
854 
855 } ASCII_MSG;
856 
857 
858 /**
859  * @brief Ephemeris parameters of one specific satellite
860  *
861  * Needed to compute the position of a satellite at a given time with
862  * high precision. Valid for an interval of 4 to 6 hours from start
863  * of transmission.
864  */
865 typedef struct
866 {
867   CSUM csum;       ///<    checksum of the remaining bytes
868   int16_t valid;   ///<    flag data are valid
869 
870   HEALTH health;   ///<    health indication of transmitting SV      [---]
871   IOD IODC;        ///<    Issue Of Data, Clock
872   IOD IODE2;       ///<    Issue of Data, Ephemeris (Subframe 2)
873   IOD IODE3;       ///<    Issue of Data, Ephemeris (Subframe 3)
874   T_GPS tt;        ///<    time of transmission
875   T_GPS t0c;       ///<    Reference Time Clock                      [---]
876   T_GPS t0e;       ///<    Reference Time Ephemeris                  [---]
877 
878   l_fp sqrt_A;     ///<    Square Root of semi-major Axis        [sqrt(m)]
879   l_fp e;          ///<    Eccentricity                              [---]
880   l_fp M0;         ///< +- Mean Anomaly at Ref. Time                 [rad]
881   l_fp omega;      ///< +- Argument of Perigee                       [rad]
882   l_fp OMEGA0;     ///< +- Longit. of Asc. Node of orbit plane       [rad]
883   l_fp OMEGADOT;   ///< +- Rate of Right Ascension               [rad/sec]
884   l_fp deltan;     ///< +- Mean Motion Diff. from computed value [rad/sec]
885   l_fp i0;         ///< +- Inclination Angle                         [rad]
886   l_fp idot;       ///< +- Rate of Inclination Angle             [rad/sec]
887   l_fp crc;        ///< +- Cosine Corr. Term to Orbit Radius           [m]
888   l_fp crs;        ///< +- Sine Corr. Term to Orbit Radius             [m]
889   l_fp cuc;        ///< +- Cosine Corr. Term to Arg. of Latitude     [rad]
890   l_fp cus;        ///< +- Sine Corr. Term to Arg. of Latitude       [rad]
891   l_fp cic;        ///< +- Cosine Corr. Term to Inclination Angle    [rad]
892   l_fp cis;        ///< +- Sine Corr. Term to Inclination Angle      [rad]
893 
894   l_fp af0;        ///< +- Clock Correction Coefficient 0            [sec]
895   l_fp af1;        ///< +- Clock Correction Coefficient 1        [sec/sec]
896   l_fp af2;        ///< +- Clock Correction Coefficient 2      [sec/sec^2]
897   l_fp tgd;        ///< +- estimated group delay differential        [sec]
898 
899   uint16_t URA;    ///<    predicted User Range Accuracy
900 
901   uint8_t L2code;  ///<    code on L2 channel                         [---]
902   uint8_t L2flag;  ///<    L2 P data flag                             [---]
903 
904 } EPH;
905 
906 
907 
908 /**
909  * @brief Almanac parameters of one specific satellite
910  *
911  * A reduced precision set of parameters used to check if a satellite
912  * is in view at a given time. Valid for an interval of more than 7 days
913  * from start of transmission.
914  */
915 typedef struct
916 {
917   CSUM csum;       ///<    checksum of the remaining bytes
918   int16_t valid;   ///<    flag data are valid
919 
920   HEALTH health;   ///<                                               [---]
921   T_GPS t0a;       ///<    Reference Time Almanac                     [sec]
922 
923   l_fp sqrt_A;     ///<    Square Root of semi-major Axis         [sqrt(m)]
924   l_fp e;          ///<    Eccentricity                               [---]
925 
926   l_fp M0;         ///< +- Mean Anomaly at Ref. Time                  [rad]
927   l_fp omega;      ///< +- Argument of Perigee                        [rad]
928   l_fp OMEGA0;     ///< +- Longit. of Asc. Node of orbit plane        [rad]
929   l_fp OMEGADOT;   ///< +- Rate of Right Ascension                [rad/sec]
930   l_fp deltai;     ///< +-                                            [rad]
931   l_fp af0;        ///< +- Clock Correction Coefficient 0             [sec]
932   l_fp af1;        ///< +- Clock Correction Coefficient 1         [sec/sec]
933 
934 } ALM;
935 
936 
937 
938 /**
939  * @brief Ionospheric correction parameters
940  */
941 typedef struct
942 {
943   CSUM csum;       ///<    checksum of the remaining bytes
944   int16_t valid;   ///<    flag data are valid
945 
946   l_fp alpha_0;    ///<    Ionosph. Corr. Coeff. Alpha 0              [sec]
947   l_fp alpha_1;    ///<    Ionosph. Corr. Coeff. Alpha 1          [sec/deg]
948   l_fp alpha_2;    ///<    Ionosph. Corr. Coeff. Alpha 2        [sec/deg^2]
949   l_fp alpha_3;    ///<    Ionosph. Corr. Coeff. Alpha 3        [sec/deg^3]
950 
951   l_fp beta_0;     ///<    Ionosph. Corr. Coeff. Beta 0               [sec]
952   l_fp beta_1;     ///<    Ionosph. Corr. Coeff. Beta 1           [sec/deg]
953   l_fp beta_2;     ///<    Ionosph. Corr. Coeff. Beta 2         [sec/deg^2]
954   l_fp beta_3;     ///<    Ionosph. Corr. Coeff. Beta 3         [sec/deg^3]
955 
956 } IONO;
957 
958 
959 
960 void mbg_tm_str (char **, TM_GPS *, int, int);
961 void mbg_tgps_str (char **, T_GPS *, int);
962 void get_mbg_header (unsigned char **, GPS_MSG_HDR *);
963 void put_mbg_header (unsigned char **, GPS_MSG_HDR *);
964 void get_mbg_sw_rev (unsigned char **, SW_REV *);
965 void get_mbg_ascii_msg (unsigned char **, ASCII_MSG *);
966 void get_mbg_svno (unsigned char **, SVNO *);
967 void get_mbg_health (unsigned char **, HEALTH *);
968 void get_mbg_cfg (unsigned char **, CFG *);
969 void get_mbg_tgps (unsigned char **, T_GPS *);
970 void get_mbg_tm (unsigned char **, TM_GPS *);
971 void get_mbg_ttm (unsigned char **, TTM *);
972 void get_mbg_synth (unsigned char **, SYNTH *);
973 void get_mbg_tzdl (unsigned char **, TZDL *);
974 void get_mbg_antinfo (unsigned char **, ANT_INFO *);
975 void get_mbg_cfgh (unsigned char **, CFGH *);
976 void get_mbg_utc (unsigned char **, UTC *);
977 void get_mbg_lla (unsigned char **, LLA);
978 void get_mbg_xyz (unsigned char **, XYZ);
979 void get_mbg_portparam (unsigned char **, PORT_PARM *);
980 void get_mbg_eph (unsigned char **, EPH *);
981 void get_mbg_alm (unsigned char **, ALM *);
982 void get_mbg_iono (unsigned char **, IONO *);
983 
984 CSUM mbg_csum (unsigned char *, unsigned int);
985 
986 #endif
987 /*
988  * History:
989  *
990  * mbg_gps166.h,v
991  * Revision 4.7  2006/06/22 18:41:43  kardel
992  * clean up signedness (gcc 4)
993  *
994  * Revision 4.6  2005/10/07 22:11:56  kardel
995  * bounded buffer implementation
996  *
997  * Revision 4.5.2.1  2005/09/25 10:23:48  kardel
998  * support bounded buffers
999  *
1000  * Revision 4.5  2005/06/25 10:58:45  kardel
1001  * add missing log keywords
1002  *
1003  * Revision 4.1  1998/06/12 15:07:30  kardel
1004  * fixed prototyping
1005  *
1006  * Revision 4.0  1998/04/10 19:50:42  kardel
1007  * Start 4.0 release version numbering
1008  *
1009  * Revision 1.1  1998/04/10 19:27:34  kardel
1010  * initial NTP VERSION 4 integration of PARSE with GPS166 binary support
1011  *
1012  * Revision 1.1  1997/10/06 20:55:38  kardel
1013  * new parse structure
1014  *
1015  */
1016