1# $NetBSD: t_pppoe.sh,v 1.2 2016/08/07 23:34:31 pgoyette Exp $ 2# 3# Copyright (c) 2016 Internet Initiative Japan Inc. 4# All rights reserved. 5# 6# Redistribution and use in source and binary forms, with or without 7# modification, are permitted provided that the following conditions 8# are met: 9# 1. Redistributions of source code must retain the above copyright 10# notice, this list of conditions and the following disclaimer. 11# 2. Redistributions in binary form must reproduce the above copyright 12# notice, this list of conditions and the following disclaimer in the 13# documentation and/or other materials provided with the distribution. 14# 15# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 16# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 17# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 18# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 19# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 20# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 21# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 22# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 23# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 24# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 25# POSSIBILITY OF SUCH DAMAGE. 26# 27 28server="rump_server -lrump -lrumpnet -lrumpnet_net -lrumpnet_netinet \ 29 -lrumpnet_netinet6 -lrumpnet_shmif -lrumpdev \ 30 -lrumpnet_pppoe" 31HIJACKING="env LD_PRELOAD=/usr/lib/librumphijack.so" 32 33SERVER=unix://commsock1 34CLIENT=unix://commsock2 35 36SERVER_IP=10.3.3.1 37CLIENT_IP=10.3.3.3 38AUTHNAME=foobar@baz.com 39SECRET=oink 40BUS=bus0 41TIMEOUT=3 42WAITTIME=5 43DEBUG=false 44 45atf_test_case pap cleanup 46 47setup() 48{ 49 atf_check -s exit:0 ${server} $SERVER 50 atf_check -s exit:0 ${server} $CLIENT 51 52 export RUMP_SERVER=$SERVER 53 atf_check -s exit:0 rump.ifconfig shmif0 create 54 atf_check -s exit:0 rump.ifconfig shmif0 linkstr $BUS 55 atf_check -s exit:0 rump.ifconfig shmif0 up 56 57 atf_check -s exit:0 rump.ifconfig pppoe0 create 58 atf_check -s exit:0 rump.ifconfig pppoe0 inet $SERVER_IP $CLIENT_IP down 59 atf_check -s exit:0 rump.ifconfig pppoe0 link0 60 61 $DEBUG && rump.ifconfig 62 $DEBUG && $HIJACKING pppoectl -d pppoe0 63 64 atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0" 65 unset RUMP_SERVER 66 67 export RUMP_SERVER=$CLIENT 68 atf_check -s exit:0 rump.ifconfig shmif0 create 69 atf_check -s exit:0 rump.ifconfig shmif0 linkstr $BUS 70 atf_check -s exit:0 rump.ifconfig shmif0 up 71 72 atf_check -s exit:0 rump.ifconfig pppoe0 create 73 atf_check -s exit:0 rump.ifconfig pppoe0 inet 0.0.0.0 0.0.0.1 down 74 75 atf_check -s exit:0 -x "$HIJACKING pppoectl -e shmif0 pppoe0" 76 unset RUMP_SERVER 77} 78cleanup() 79{ 80 env RUMP_SERVER=$SERVER rump.halt 81 env RUMP_SERVER=$CLIENT rump.halt 82} 83 84pap_head() 85{ 86 atf_set "descr" "Does simple pap tests" 87 atf_set "require.progs" "rump_server pppoectl" 88} 89 90wait_for_session_established() 91{ 92 local dontfail=$1 93 local n=$WAITTIME 94 95 for i in $(seq $n); do 96 $HIJACKING pppoectl -d pppoe0 |grep -q "state = session" 97 [ $? = 0 ] && return 98 sleep 1 99 done 100 101 if [ $dontfail != "dontfail" ]; then 102 atf_fail "Couldn't connect to the server for $n seconds." 103 fi 104} 105 106pap_body() 107{ 108 local auth=pap 109 setup 110 111 export RUMP_SERVER=$SERVER 112 local setup_serverparam="pppoectl pppoe0 hisauthproto=$auth \ 113 'hisauthname=$AUTHNAME' \ 114 'hisauthsecret=$SECRET' \ 115 'myauthproto=none'" 116 atf_check -s exit:0 -x "$HIJACKING $setup_serverparam" 117 atf_check -s exit:0 rump.ifconfig pppoe0 up 118 unset RUMP_SERVER 119 120 export RUMP_SERVER=$CLIENT 121 local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \ 122 'myauthname=$AUTHNAME' \ 123 'myauthsecret=$SECRET' \ 124 'hisauthproto=none'" 125 atf_check -s exit:0 -x "$HIJACKING $setup_clientparam" 126 atf_check -s exit:0 rump.ifconfig pppoe0 up 127 $DEBUG && rump.ifconfig 128 wait_for_session_established 129 atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $SERVER_IP 130 unset RUMP_SERVER 131 132 # test for disconnection from server 133 atf_check -s exit:0 -x "env RUMP_SERVER=$SERVER rump.ifconfig pppoe0 down" 134 export RUMP_SERVER=$CLIENT 135 atf_check -s not-exit:0 -o ignore -e ignore \ 136 rump.ping -c 1 -w $TIMEOUT $SERVER_IP 137 atf_check -s exit:0 -o match:'PADI sent' -x "$HIJACKING pppoectl -d pppoe0" 138 unset RUMP_SERVER 139 140 # test for recoonecting 141 atf_check -s exit:0 -x "env RUMP_SERVER=$SERVER rump.ifconfig pppoe0 up" 142 export RUMP_SERVER=$CLIENT 143 wait_for_session_established 144 atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $SERVER_IP 145 unset RUMP_SERVER 146 147 # test for disconnection from client 148 atf_check -s exit:0 -x "env RUMP_SERVER=$CLIENT rump.ifconfig pppoe0 down" 149 export RUMP_SERVER=$SERVER 150 $DEBUG && $HIJACKING pppoectl -d pppoe0 151 atf_check -s not-exit:0 -o ignore -e ignore \ 152 rump.ping -c 1 -w $TIMEOUT $CLIENT_IP 153 atf_check -s exit:0 -o match:'initial' -x "$HIJACKING pppoectl -d pppoe0" 154 unset RUMP_SERVER 155 156 # test for recconecting 157 export RUMP_SERVER=$CLIENT 158 atf_check -s exit:0 -x rump.ifconfig pppoe0 up 159 wait_for_session_established 160 $DEBUG && rump.ifconfig pppoe0 161 $DEBUG && $HIJACKING pppoectl -d pppoe0 162 unset RUMP_SERVER 163 164 export RUMP_SERVER=$SERVER 165 atf_check -s exit:0 -o ignore rump.ping -c 1 -w $TIMEOUT $CLIENT_IP 166 atf_check -s exit:0 -o match:'session' -x "$HIJACKING pppoectl -d pppoe0" 167 $DEBUG && HIJACKING pppoectl -d pppoe0 168 unset RUMP_SERVER 169 170 # test for invalid password 171 export RUMP_SERVER=$CLIENT 172 atf_check -s exit:0 rump.ifconfig pppoe0 down 173 local setup_clientparam="pppoectl pppoe0 myauthproto=$auth \ 174 'myauthname=$AUTHNAME' \ 175 'myauthsecret=invalidsecret' \ 176 'hisauthproto=none'" 177 atf_check -s exit:0 -x "$HIJACKING $setup_clientparam" 178 atf_check -s exit:0 rump.ifconfig pppoe0 up 179 wait_for_session_established dontfail 180 atf_check -s not-exit:0 -o ignore -e ignore \ 181 rump.ping -c 1 -w $TIMEOUT $SERVER_IP 182 atf_check -s exit:0 -o match:'initial' -x "$HIJACKING pppoectl -d pppoe0" 183 unset RUMP_SERVER 184} 185 186pap_cleanup() 187{ 188 cleanup 189} 190atf_init_test_cases() 191{ 192 atf_add_test_case pap 193} 194