1######## TERMINAL TYPE DESCRIPTIONS SOURCE FILE 2# 3# This version of terminfo.src is distributed with ncurses and is maintained 4# by Thomas E. Dickey (TD). 5# 6# Report bugs and new terminal descriptions to 7# bug-ncurses@gnu.org 8# 9# $Revision: 1.484 $ 10# $Date: 2014/02/22 21:03:37 $ 11# 12# The original header is preserved below for reference. It is noted that there 13# is a "newer" version which differs in some cosmetic details (but actually 14# stopped updates several years ago); we have decided to not change the header 15# unless there is also a change in content. 16# 17# To further muddy the waters, it is noted that changes to this file as part of 18# maintenance of ncurses (since 1996) are generally conceded to be copyright 19# under the ncurses MIT-style license. That was the effect of the agreement 20# which the principal authors of ncurses made in 1998. However, since much of 21# the file itself is of unknown authorship (and the disclaimer below makes it 22# obvious that Raymond cannot or will not convey rights over those parts), 23# there is no explicit copyright notice on the file itself. 24# 25# It would also be a nuisance to split the file into unknown/known authorship 26# and move pieces as they are maintained, since many of the maintenance changes 27# have been small corrections to Raymond's translations to/from termcap format, 28# correcting the data but not the accompanying annotations. 29# 30# In any case, note that almost half of this file is not data but annotations 31# which reflect creative effort. Furthermore, the structure of entries to 32# reuse common chunks also is creative (and subject to copyright). Finally, 33# some portions of the data are derivative work under a compatible MIT-style 34# license from xterm. 35# 36#------------------------------------------------------------------------------ 37# Version 10.2.1 38# terminfo syntax 39# 40# Eric S. Raymond (current maintainer) 41# John Kunze, Berkeley 42# Craig Leres, Berkeley 43# 44# Please e-mail changes to terminfo@thyrsus.com; the old termcap@berkeley.edu 45# address is no longer valid. The latest version can always be found at 46# <http://www.tuxedo.org/terminfo>. 47# 48# PURPOSE OF THIS FILE: 49# 50# This file describes the capabilities of various character-cell terminals, 51# as needed by software such as screen-oriented editors. 52# 53# Other terminfo and termcap files exist, supported by various OS vendors 54# or as relics of various older versions of UNIX. This one is the longest 55# and most comprehensive one in existence. It subsumes not only the entirety 56# of the historical 4.4BSD, GNU, System V and SCO termcap files and the BRL 57# termcap file, but also large numbers of vendor-maintained termcap and 58# terminfo entries more complete and carefully tested than those in historical 59# termcap/terminfo versions. 60# 61# Pointers to related resources (including the ncurses distribution) may 62# be found at <http://www.tuxedo.org/terminfo>. 63# 64# INTERNATIONALIZATION: 65# 66# This file uses only the US-ASCII character set (no ISO8859 characters). 67# 68# This file assumes a US-ASCII character set. If you need to fix this, start 69# by global-replacing \E(B and \E)B with the appropriate ISO 6429 enablers 70# for your character set. \E(A and \E)A enables the British character set 71# with the pound sign at position 2/3. 72# 73# In a Japanese-processing environment using EUC/Japanese or Shift-JIS, 74# C1 characters are considered the first-byte set of the Japanese encodings, 75# so \E)0 should be avoided in <enacs> and initialization strings. 76# 77# FILE FORMAT: 78# 79# The version you are looking at may be in any of three formats: master 80# (terminfo with OT capabilities), stock terminfo, or termcap. You can tell 81# which by the format given in the header above. 82# 83# The master format is accepted and generated by the terminfo tools in the 84# ncurses suite; it differs from stock (System V-compatible) terminfo only 85# in that it admits a group of capabilities (prefixed `OT') equivalent to 86# various obsolete termcap capabilities. You can, thus, convert from master 87# to stock terminfo simply by filtering with `sed "/OT[^,]*,/s///"'; but if 88# you have ncurses `tic -I' is nicer (among other things, it automatically 89# outputs entries in a canonical form). 90# 91# The termcap version is generated automatically from the master version 92# using tic -C. This filtering leaves in the OT capabilities under their 93# original termcap names. All translated entries fit within the 1023-byte 94# string-table limit of archaic termcap libraries except where explicitly 95# noted below. Note that the termcap translation assumes that your termcap 96# library can handle multiple tc capabilities in an entry. 4.4BSD has this 97# capability. Older versions of GNU termcap, through 1.3, do not. 98# 99# For details on these formats, see terminfo(5) in the ncurses distribution, 100# and termcap(5) in the 4.4BSD Unix Programmer's Manual. Be aware that 4.4BSD 101# curses has been declared obsolete by the caretakers of the 4.4BSD sources 102# as of June 1995; they are encouraging everyone to migrate to ncurses. 103# 104# Note: unlike some other distributed terminfo files (Novell Unix & SCO's), 105# no entry in this file has embedded comments. This is so source translation 106# to termcap only has to carry over leading comments. Also, no name field 107# contains embedded whitespace (such whitespace confuses rdist). 108# 109# Further note: older versions of this file were often installed with an editor 110# script (reorder) that moved the most common terminal types to the front of 111# the file. This should no longer be necessary, as the file is now ordered 112# roughly by type frequency with ANSI/VT100 and other common types up front. 113# 114# Some information has been merged in from terminfo files distributed by 115# USL and SCO (see COPYRIGHTS AND OTHER DELUSIONS below). Much information 116# comes from vendors who maintain official terminfos for their hardware 117# (notably DEC and Wyse). 118# 119# A detailed change history is included at the end of this file. 120# 121# FILE ORGANIZATION: 122# 123# Comments in this file begin with # - they cannot appear in the middle 124# of a terminfo/termcap entry (this feature had to be sacrificed in order 125# to allow standard terminfo and termcap syntax to be generated cleanly from 126# the master format). Individual capabilities are commented out by 127# placing a period between the colon and the capability name. 128# 129# The file is divided up into major sections (headed by lines beginning with 130# the string "########") and minor sections (beginning with "####"); do 131# 132# grep "^####" <file> | more 133# 134# to see a listing of section headings. The intent of the divisions is 135# (a) to make it easier to find things, and (b) to order the database so 136# that important and frequently-encountered terminal types are near the 137# front (so that you'll get reasonable search efficiency from a linear 138# search of the termcap form even if you don't use reorder). Minor sections 139# usually correspond to manufacturers or standard terminal classes. 140# Parenthesized words following manufacturer names are type prefixes or 141# product line names used by that manufacturers. 142# 143# HOW TO READ THE ENTRIES: 144# 145# The first name in an entry is the canonical name for the model or 146# type, last entry is a verbose description. Others are mnemonic synonyms for 147# the terminal. 148# 149# Terminal names look like <manufacturer> <model> - <modes/options> 150# The part to the left of the dash, if a dash is present, describes the 151# particular hardware of the terminal. The part to the right may be used 152# for flags indicating special ROMs, extra memory, particular terminal modes, 153# or user preferences. 154# 155# All names should be in lower case, for consistency in typing. 156# 157# The following are conventionally used suffixes: 158# -2p Has two pages of memory. Likewise 4p, 8p, etc. 159# -am Enable auto-margin. 160# -m Monochrome. Suppress color support 161# -mc Magic-cookie. Some terminals (notably older Wyses) can 162# only support one attribute without magic-cookie lossage. 163# Their base entry is usually paired with another that 164# uses magic cookies to support multiple attributes. 165# -nam No auto-margin - suppress <am> capability 166# -nl No labels - suppress soft labels 167# -ns No status line - suppress status line 168# -rv Terminal in reverse video mode (black on white) 169# -s Enable status line. 170# -vb Use visible bell (<flash>) rather than <bel>. 171# -w Wide - in 132 column mode. 172# If a name has multiple suffixes and one is a line height, that one should 173# go first. Thus `aaa-30-s-rv' is recommended over `aaa-s-rv-30'. 174# 175# Entries with embedded plus signs are designed to be included through use/tc 176# capabilities, not used as standalone entries. 177# 178# To avoid search clashes, some older all-numeric names for terminals have 179# been removed (i.e., "33" for the Model 33 Teletype, "2621" for the HP2621). 180# All primary names of terminals now have alphanumeric prefixes. 181# 182# Comments marked "esr" are mostly results of applying the termcap-compiler 183# code packaged with ncurses and contemplating the resulting error messages. 184# In many cases, these indicated obvious fixes to syntax garbled by the 185# composers. In a few cases, I was able to deduce corrected forms for garbled 186# capabilities by looking at context. All the information in the original 187# entries is preserved in the comments. 188# 189# In the comments, terminfo capability names are bracketed with <> (angle 190# brackets). Termcap capability names are bracketed with :: (colons). 191# 192# INTERPRETATION OF USER CAPABILITIES 193# 194# The System V Release 4 and XPG4 terminfo format defines ten string 195# capabilities for use by applications, <u0>...<u9>. In this file, we use 196# certain of these capabilities to describe functions which are not covered 197# by terminfo. The mapping is as follows: 198# 199# u9 terminal enquire string (equiv. to ANSI/ECMA-48 DA) 200# u8 terminal answerback description 201# u7 cursor position request (equiv. to VT100/ANSI/ECMA-48 DSR 6) 202# u6 cursor position report (equiv. to ANSI/ECMA-48 CPR) 203# 204# The terminal enquire string <u9> should elicit an answerback response 205# from the terminal. Common values for <u9> will be ^E (on older ASCII 206# terminals) or \E[c (on newer VT100/ANSI/ECMA-48-compatible terminals). 207# 208# The cursor position request (<u7>) string should elicit a cursor position 209# report. A typical value (for VT100 terminals) is \E[6n. 210# 211# The terminal answerback description (u8) must consist of an expected 212# answerback string. The string may contain the following scanf(3)-like 213# escapes: 214# 215# %c Accept any character 216# %[...] Accept any number of characters in the given set 217# 218# The cursor position report (<u6>) string must contain two scanf(3)-style 219# %d format elements. The first of these must correspond to the Y coordinate 220# and the second to the %d. If the string contains the sequence %i, it is 221# taken as an instruction to decrement each value after reading it (this is 222# the inverse sense from the cup string). The typical CPR value is 223# \E[%i%d;%dR (on VT100/ANSI/ECMA-48-compatible terminals). 224# 225# These capabilities are used by tack(1m), the terminfo action checker 226# (distributed with ncurses 5.0). 227# 228# TABSET FILES 229# 230# All the entries in this file have been edited to assume that the tabset 231# files directory is /usr/share/tabset, in conformance with the File Hierarchy 232# Standard for Linux and open-source BSD systems. Some vendors (notably Sun) 233# use /usr/lib/tabset or (more recently) /usr/share/lib/tabset. 234# 235# No curses package we know of actually uses these files. If their location 236# is an issue, you will have to hand-patch the file locations before compiling 237# this file. 238# 239# REQUEST FOR CONTACT INFORMATION AND HISTORICAL MATERIAL 240# 241# As the ANSI/ECMA-48 standard and variants take firmer hold, and as 242# character-cell terminals are increasingly replaced by X displays, much of 243# this file is becoming a historical document (this is part of the reason for 244# the new organization, which puts ANSI types, xterm, Unix consoles, 245# and vt100 up front in confidence that this will catch 95% of new hardware). 246# 247# For the terminal types still alive, I'd like to have manufacturer's 248# contact data (Internet address and/or snail-mail + phone). 249# 250# I'm also interested in enriching the comments so that the latter portions of 251# the file do in fact become a potted history of VDT technology as seen by 252# UNIX hackers. Ideally, I'd like the headers for each manufacturer to 253# include its live/dead/out-of-the-business status, and for as many 254# terminal types as possible to be tagged with information like years 255# of heaviest use, popularity, and interesting features. 256# 257# I'm especially interested in identifying the obscure entries listed under 258# `Miscellaneous obsolete terminals, manufacturers unknown' before the tribal 259# wisdom about them gets lost. If you know a lot about obscure old terminals, 260# please go to the terminfo resource page, grab the UFO file (ufo.ti), and 261# eyeball it for things you can identify and describe. 262# 263# If you have been around long enough to contribute, please read the file 264# with this in mind and send me your annotations. 265# 266# COPYRIGHTS AND OTHER DELUSIONS 267# 268# The BSD ancestor of this file had a standard Regents of the University of 269# California copyright with dates from 1980 to 1993. 270# 271# Some information has been merged in from a terminfo file SCO distributes. 272# It has an obnoxious boilerplate copyright which I'm ignoring because they 273# took so much of the content from the ancestral BSD versions of this file 274# and didn't attribute it, thereby violating the BSD Regents' copyright. 275# 276# Not that anyone should care. However many valid functions copyrights may 277# serve, putting one on a termcap/terminfo file with hundreds of anonymous 278# contributors makes about as much sense as copyrighting a wall-full of 279# graffiti -- it's legally dubious, ethically bogus, and patently ridiculous. 280# 281# This file deliberately has no copyright. It belongs to no one and everyone. 282# If you claim you own it, you will merely succeed in looking like a fool. 283# Use it as you like. Use it at your own risk. Copy and redistribute freely. 284# There are no guarantees anywhere. Svaha! 285# 286 287######## ANSI, UNIX CONSOLE, AND SPECIAL TYPES 288# 289# This section describes terminal classes and brands that are still 290# quite common. 291# 292 293#### Specials 294# 295# Special "terminals". These are used to label tty lines when you don't 296# know what kind of terminal is on it. The characteristics of an unknown 297# terminal are the lowest common denominator - they look about like a ti 700. 298# 299 300dumb|80-column dumb tty, 301 am, 302 cols#80, 303 bel=^G, cr=^M, cud1=^J, ind=^J, 304unknown|unknown terminal type, 305 gn, use=dumb, 306lpr|printer|line printer, 307 OTbs, hc, os, 308 cols#132, lines#66, 309 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ind=^J, 310glasstty|classic glass tty interpreting ASCII control characters, 311 OTbs, am, 312 cols#80, 313 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ht=^I, kcub1=^H, 314 kcud1=^J, nel=^M^J, .kbs=^H, 315 316vanilla|dumb tty, 317 OTbs, 318 bel=^G, cr=^M, cud1=^J, ind=^J, 319 320# This is almost the same as "dumb", but with no prespecified width. 321# DEL and ^C are hardcoded to act as kill characters. 322# ^D acts as a line break (just like newline). 323# It also interprets 324# \033];xxx\007 325# for compatibility with xterm -TD 3269term|Plan9 terminal emulator for X, 327 am, 328 OTnl=^J, bel=^G, cud1=^J, 329 330#### ANSI.SYS/ISO 6429/ECMA-48 Capabilities 331# 332# See the end-of-file comment for more on these. 333# 334 335# ANSI capabilities are broken up into pieces, so that a terminal 336# implementing some ANSI subset can use many of them. 337ansi+local1, 338 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 339ansi+local, 340 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 341 cuu=\E[%p1%dA, use=ansi+local1, 342ansi+tabs, 343 cbt=\E[Z, ht=^I, hts=\EH, tbc=\E[3g, 344ansi+inittabs, 345 it#8, use=ansi+tabs, 346ansi+erase, 347 clear=\E[H\E[J, ed=\E[J, el=\E[K, 348ansi+rca, 349 hpa=\E[%p1%{1}%+%dG, vpa=\E[%p1%{1}%+%dd, 350ansi+cup, 351 cup=\E[%i%p1%d;%p2%dH, home=\E[H, 352ansi+rep, 353 rep=%p1%c\E[%p2%{1}%-%db, 354ansi+idl1, 355 dl1=\E[M, il1=\E[L, 356ansi+idl, 357 dl=\E[%p1%dM, il=\E[%p1%dL, use=ansi+idl1, 358ansi+idc, 359 dch1=\E[P, ich=\E[%p1%d@, ich1=\E[@, rmir=\E6, smir=\E6, 360ansi+arrows, 361 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 362 khome=\E[H, 363ansi+sgr|ansi graphic renditions, 364 blink=\E[5m, invis=\E[8m, rev=\E[7m, 365 sgr=\E[0%?%p3%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 366 sgr0=\E[0m, 367ansi+sgrso|ansi standout only, 368 rmso=\E[m, smso=\E[7m, 369ansi+sgrul|ansi underline only, 370 rmul=\E[m, smul=\E[4m, 371ansi+sgrbold|ansi graphic renditions; assuming terminal has bold; not dim, 372 bold=\E[1m, 373 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 374 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 375ansi+sgrdim|ansi graphic renditions; assuming terminal has dim; not bold, 376 dim=\E[2m, 377 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p5%t2;%;%?%p7%t8;%;m, 378 use=ansi+sgr, use=ansi+sgrso, use=ansi+sgrul, 379ansi+csr|ansi scroll-region plus cursor save & restore, 380 csr=\E[%i%p1%d;%p2%dr, rc=\E8, sc=\E7, 381 382# The normal (ANSI) flavor of "media copy" building block asserts that 383# characters sent to the printer do not echo on the screen. DEC terminals 384# can also be put into autoprinter mode, where each line is sent to the 385# printer as you move off that line, e.g., by a carriage return. 386ansi+pp|ansi printer port, 387 mc5i, 388 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, 389dec+pp|DEC autoprinter mode, 390 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, 391 392# The IBM PC alternate character set. Plug this into any Intel console entry. 393# We use \E[11m for rmacs rather than \E[12m so the <acsc> string can use the 394# ROM graphics for control characters such as the diamond, up- and down-arrow. 395# This works with the System V, Linux, and BSDI consoles. It's a safe bet this 396# will work with any Intel console, they all seem to have inherited \E[11m 397# from the ANSI.SYS de-facto standard. 398klone+acs|alternate character set for ansi.sys displays, 399 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 400 rmacs=\E[10m, smacs=\E[11m, 401 402# Highlight controls corresponding to the ANSI.SYS standard. Most 403# console drivers for Intel boxes obey these. Makes the same assumption 404# about \E[11m as klone+acs. True ANSI/ECMA-48 would have <rmso=\E[27m>, 405# <rmul=\E[24m>, but this isn't a documented feature of ANSI.SYS. 406klone+sgr|attribute control for ansi.sys displays, 407 blink=\E[5m, bold=\E[1m, rev=\E[7m, rmpch=\E[10m, 408 rmso=\E[m, rmul=\E[m, 409 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p9%t;11%;m, 410 sgr0=\E[0;10m, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 411 use=klone+acs, 412 413# Most Intel boxes do not treat "invis" (invisible) text. 414klone+sgr8|attribute control for ansi.sys displays, 415 invis=\E[8m, 416 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 417 use=klone+sgr, 418 419# Highlight controls corresponding to the ANSI.SYS standard. *All* 420# console drivers for Intel boxes obey these. Does not assume \E[11m will 421# work; uses \E[12m instead, which is pretty bulletproof but loses you the ACS 422# diamond and arrow characters under curses. 423klone+sgr-dumb|attribute control for ansi.sys displays (no ESC [ 11 m), 424 blink=\E[5m, bold=\E[1m, invis=\E[8m, rev=\E[7m, rmso=\E[m, 425 rmul=\E[m, 426 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 427 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 428 use=klone+acs, 429 430# KOI8-R (RFC1489) acs (alternate character set) 431# From: Qing Long <qinglong@Bolizm.ihep.su>, 24 Feb 1996. 432klone+koi8acs|alternate character set for ansi.sys displays with KOI8 charset, 433 acsc=+\020\,\021-\036.^_0\215`\004a\237f\234g\232h\222i\220j\205k\203l\202m\204n\212o\213p\216q\0r\217s\214t\206u\207v\210w\211x\201y\230z\231{\267|\274}L~\225, 434 rmacs=\E[10m, smacs=\E[11m, 435 436# ANSI.SYS color control. The setab/setaf caps depend on the coincidence 437# between SVr4/XPG4's color numbers and ANSI.SYS attributes. Here are longer 438# but equivalent strings that don't rely on that coincidence: 439# setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 440# setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 441# The DOS 5 manual asserts that these sequences meet the ISO 6429 standard. 442# They match a subset of ECMA-48. 443klone+color|color control for ansi.sys and ISO6429-compatible displays, 444 colors#8, ncv#3, pairs#64, 445 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 446 447# This is better than klone+color, it doesn't assume white-on-black as the 448# default color pair, but many `ANSI' terminals don't grok the <op> cap. 449ecma+color|color control for ECMA-48-compatible terminals, 450 AX, 451 colors#8, ncv#3, pairs#64, 452 op=\E[39;49m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 453 454# Attribute control for ECMA-48-compatible terminals 455ecma+sgr|attribute capabilities for true ECMA-48 terminals, 456 rmso=\E[27m, rmul=\E[24m, use=klone+sgr8, 457 458# For comparison, here are all the capabilities implied by the Intel 459# Binary Compatibility Standard (level 2) that fit within terminfo. 460# For more detail on this rather pathetic standard, see the comments 461# near the end of this file. 462ibcs2|Intel Binary Compatibility Standard prescriptions, 463 cbt=\E[Z, clear=\Ec, cub=\E[%p1%dD, cub1=\E[1D, 464 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 465 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 466 dch=\E[%p1%dP, dispc=\E=%p1%dg, ech=\E[%p1%dX, 467 hpa=\E[%i%p1%dG, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 468 il=\E[%p1%dL, indn=\E[%p1%dS, rc=\E7, rin=\E[%p1%dT, 469 rmam=\E[?7l, sc=\E7, smam=\E[?7h, tbc=\E[g, 470 vpa=\E[%i%p1%dd, 471 472#### ANSI/ECMA-48 terminals and terminal emulators 473# 474# See near the end of this file for details on ANSI conformance. 475# Don't mess with these entries! Lots of other entries depend on them! 476# 477# This section lists entries in a least-capable to most-capable order. 478# if you're in doubt about what `ANSI' matches yours, try them in that 479# order and back off from the first that breaks. 480 481# ansi-mr is for ANSI terminals with ONLY relative cursor addressing 482# and more than one page of memory. It uses local motions instead of 483# direct cursor addressing, and makes almost no assumptions. It does 484# assume auto margins, no padding and/or xon/xoff, and a 24x80 screen. 485ansi-mr|mem rel cup ansi, 486 am, xon, 487 cols#80, lines#24, use=vanilla, use=ansi+erase, 488 use=ansi+local1, 489 490# ansi-mini is a bare minimum ANSI terminal. This should work on anything, but 491# beware of screen size problems and memory relative cursor addressing. 492ansi-mini|any ansi terminal with pessimistic assumptions, 493 am, xon, 494 cols#80, lines#24, use=vanilla, use=ansi+cup, 495 use=ansi+erase, 496 497# ansi-mtabs adds relative addressing and minimal tab support 498ansi-mtabs|any ansi terminal with pessimistic assumptions, 499 it#8, 500 ht=^I, use=ansi-mini, use=ansi+local1, 501 502# ANSI X3.64 from emory!mlhhh (Hugh Hansard) via BRL 503# 504# The following is an entry for the full ANSI 3.64 (1977). It lacks 505# padding, but most terminals using the standard are "fast" enough 506# not to require any -- even at 9600 bps. If you encounter problems, 507# try including the padding specifications. 508# 509# Note: the :as: and :ae: specifications are not implemented here, for 510# the available termcap documentation does not make clear WHICH alternate 511# character set to specify. ANSI 3.64 seems to make allowances for several. 512# Please make the appropriate adjustments to fit your needs -- that is 513# if you will be using alternate character sets. 514# 515# There are very few terminals running the full ANSI 3.64 standard, 516# so I could only test this entry on one verified terminal (Visual 102). 517# I would appreciate the results on other terminals sent to me. 518# 519# Please report comments, changes, and problems to: 520# 521# U.S. MAIL: Hugh Hansard 522# Box: 22830 523# Emory University 524# Atlanta, GA. 30322. 525# 526# USENET {akgua,msdc,sb1,sb6,gatech}!emory!mlhhh. 527# 528# (Added vt100 <rc>,<sc> to quiet a tic warning --esr) 529ansi77|ansi 3.64 standard 1977 version, 530 OTbs, am, mir, 531 cols#80, it#8, lines#24, 532 bel=^G, clear=\E[;H\E[2J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 533 cub1=^H, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 534 cuu1=\E[A, dch1=\E[P, dl1=\E[M$<5*/>, ed=\E[J, el=\E[K, 535 home=\E[H, ht=^I, il1=\E[L$<5*/>, ind=\ED, kbs=^H, 536 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 537 kf2=\EOR, kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, 538 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, smir=\E[4h, 539 smso=\E[7m, smul=\E[4m, 540 541# Procomm and some other ANSI emulations don't recognize all of the ANSI- 542# standard capabilities. This entry deletes <cuu>, <cuf>, <cud>, <cub>, and 543# <vpa>/<hpa> capabilities, forcing curses to use repetitions of <cuu1>, 544# <cuf1>, <cud1> and <cub1>. Also deleted <ich> and <ich1>, as QModem up to 545# 5.03 doesn't recognize these. Finally, we delete <rep> and <ri>, which seem 546# to confuse many emulators. On the other hand, we can count on these programs 547# doing <rmacs>/<smacs>/<sgr>. Older versions of this entry featured 548# <invis=\E[9m>, but <invis=\E[8m> now seems to be more common under 549# ANSI.SYS influence. 550# From: Eric S. Raymond <esr@snark.thyrsus.com> Oct 30 1995 551pcansi-m|pcansi-mono|ibm-pc terminal programs claiming to be ansi (mono mode), 552 OTbs, am, mir, msgr, 553 cols#80, it#8, lines#24, 554 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=\E[D, 555 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 556 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 557 hts=\EH, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 558 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, tbc=\E[3g, 559 use=klone+sgr-dumb, 560pcansi-25-m|pcansi25m|ibm-pc terminal programs with 25 lines (mono mode), 561 lines#25, use=pcansi-m, 562pcansi-33-m|pcansi33m|ibm-pc terminal programs with 33 lines (mono mode), 563 lines#33, use=pcansi-m, 564pcansi-43-m|ansi43m|ibm-pc terminal programs with 43 lines (mono mode), 565 lines#43, use=pcansi-m, 566# The color versions. All PC emulators do color... 567pcansi|ibm-pc terminal programs claiming to be ansi, 568 use=klone+color, use=pcansi-m, 569pcansi-25|pcansi25|ibm-pc terminal programs with 25 lines, 570 lines#25, use=pcansi, 571pcansi-33|pcansi33|ibm-pc terminal programs with 33 lines, 572 lines#33, use=pcansi, 573pcansi-43|pcansi43|ibm-pc terminal programs with 43 lines, 574 lines#43, use=pcansi, 575 576# ansi-m -- full ANSI X3.64 with ANSI.SYS-compatible attributes, no color. 577# If you want pound signs rather than dollars, replace `B' with `A' 578# in the <s0ds>, <s1ds>, <s2ds>, and <s3ds> capabilities. 579# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 580ansi-m|ansi-mono|ANSI X3.64-1979 terminal with ANSI.SYS compatible attributes, 581 mc5i, 582 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 583 cuu=\E[%p1%dA, dch=\E[%p1%dP, dl=\E[%p1%dM, 584 ech=\E[%p1%dX, el1=\E[1K, hpa=\E[%i%p1%dG, ht=\E[I, 585 ich=\E[%p1%d@, il=\E[%p1%dL, indn=\E[%p1%dS, kbs=^H, 586 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 587 kich1=\E[L, mc4=\E[4i, mc5=\E[5i, nel=\r\E[S, 588 rep=%p1%c\E[%p2%{1}%-%db, rin=\E[%p1%dT, s0ds=\E(B, 589 s1ds=\E)B, s2ds=\E*B, s3ds=\E+B, tbc=\E[3g, 590 vpa=\E[%i%p1%dd, use=pcansi-m, 591 592ansi+enq|ncurses extension for ANSI ENQ, 593 u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?%[;0123456789]c, 594 u9=\E[c, 595 596# ansi -- this terminfo expresses the largest subset of X3.64 that will fit in 597# standard terminfo. Assumes ANSI.SYS-compatible attributes and color. 598# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 6 1995 599ansi|ansi/pc-term compatible with color, 600 use=ansi+enq, use=ecma+color, use=klone+sgr8, use=ansi-m, 601 602# ansi-generic is a vanilla ANSI terminal. This is assumed to implement 603# all the normal ANSI stuff with no extensions. It assumes 604# insert/delete line/char is there, so it won't work with 605# vt100 clones. It assumes video attributes for bold, blink, 606# underline, and reverse, which won't matter much if the terminal 607# can't do some of those. Padding is assumed to be zero, which 608# shouldn't hurt since xon/xoff is assumed. 609ansi-generic|generic ansi standard terminal, 610 am, xon, 611 cols#80, lines#24, use=vanilla, use=ansi+csr, use=ansi+cup, 612 use=ansi+rca, use=ansi+erase, use=ansi+tabs, 613 use=ansi+local, use=ansi+idc, use=ansi+idl, use=ansi+rep, 614 use=ansi+sgrbold, use=ansi+arrows, 615 616#### DOS ANSI.SYS variants 617# 618# This completely describes the sequences specified in the DOS 2.1 ANSI.SYS 619# documentation (except for the keyboard key reassignment feature, which 620# doesn't fit the <pfkey> model well). The klone+acs sequences were valid 621# though undocumented. The <pfkey> capability is untested but should work for 622# keys F1-F10 (%p1 values outside this range will yield unpredictable results). 623# From: Eric S. Raymond <esr@snark.thyrsus.com> Nov 7 1995 624ansi.sys-old|ANSI.SYS under PC-DOS 2.1, 625 OTbs, am, mir, msgr, xon, 626 cols#80, lines#25, 627 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 628 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[k, home=\E[H, 629 is2=\E[m\E[?7h, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 630 khome=^^, pfkey=\E[0;%p1%{58}%+%d;%p2"%s"p, rc=\E[u, 631 rmam=\E[?7l, sc=\E[s, smam=\E[?7h, u6=\E[%i%d;%dR, 632 u7=\E[6n, use=klone+color, use=klone+sgr8, 633 634# Keypad: Home=\0G Up=\0H PrPag=\0I 635# ka1,kh kcuu1 kpp,ka3 636# 637# Left=\0K 5=\0L Right=\0M 638# kcub1 kb2 kcuf1 639# 640# End=\0O Down=\0P NxPag=\0Q 641# kc1,kend kcud1 kc3,knp 642# 643# Ins=\0R Del=\0S 644# kich1 kdch1 645# 646# On keyboard with 12 function keys, 647# shifted f-keys: F13-F24 648# control f-keys: F25-F36 649# alt f-keys: F37-F48 650# The shift/control/alt keys do not modify each other, but alt overrides both, 651# and control overrides shift. 652# 653# <pfkey> capability for F1-F48 -TD 654ansi.sys|ANSI.SYS 3.1 and later versions, 655 el=\E[K, ka1=\0G, ka3=\0I, kb2=\0L, kbs=^H, kc1=\0O, kc3=\0Q, 656 kcbt=\0^O, kcub1=\0K, kcud1=\0P, kcuf1=\0M, kcuu1=\0H, 657 kdch1=\0S, kend=\0O, kf1=\0;, kf10=\0D, kf11=\0\205, 658 kf12=\0\206, kf13=\0T, kf14=\0U, kf15=\0V, kf16=\0W, 659 kf17=\0X, kf18=\0Y, kf19=\0Z, kf2=\0<, kf20=\0[, kf21=\0\\, 660 kf22=\0], kf23=\0\207, kf24=\0\210, kf25=\0\^, kf26=\0_, 661 kf27=\0`, kf28=\0a, kf29=\0b, kf3=\0=, kf30=\0c, kf31=\0d, 662 kf32=\0e, kf33=\0f, kf34=\0g, kf35=\0\211, kf36=\0\212, 663 kf37=\0h, kf38=\0i, kf39=\0j, kf4=\0>, kf40=\0k, kf41=\0l, 664 kf42=\0m, kf43=\0n, kf44=\0o, kf45=\0p, kf46=\0q, 665 kf47=\0\213, kf48=\0\214, kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, 666 kf9=\0C, khome=\0G, kich1=\0R, knp=\0Q, kpp=\0I, 667 pfkey=\E[0;%?%p1%{11}%<%t%'\:'%e%p1%{13}%<%t%'z'%e%p1%{23}%<%t%'G'%e%p1%{25}%<%t%'p'%e%p1%'#'%<%t%'E'%e%p1%'%'%<%t%'f'%e%p1%'/'%<%t%'C'%e%{92}%;%p1%+%d;%p2"%s"p, 668 use=ansi.sys-old, 669 670# 671# Define IBM PC keypad keys for vi as per MS-Kermit while using ANSI.SYS. 672# This should only be used when the terminal emulator cannot redefine the keys. 673# Since redefining keys with ansi.sys also affects PC-DOS programs, the key 674# definitions must be restored. If the terminal emulator is quit while in vi 675# or others using <smkx>/<rmkx>, the keypad will not be defined as per PC-DOS. 676# The PgUp and PgDn are prefixed with ESC so that tn3270 can be used on Unix 677# (^U and ^D are already defined for tn3270). The ESC is safe for vi but it 678# does "beep". ESC ESC i is used for Ins to avoid tn3270 ESC i for coltab. 679# Note that <kcub1> is always BS, because PC-dos can tolerate this change. 680# Caution: vi is limited to 256 string bytes, longer crashes or weirds out vi. 681# Consequently the End keypad key could not be set (it is relatively safe and 682# actually useful because it sends ^@ O, which beeps and opens a line above). 683ansi.sysk|ansisysk|PC-DOS 3.1 ANSI.SYS with keypad redefined for vi, 684 is2=U2 PC-DOS 3.1 ANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 685 rmkx=\E[;71;0;71p\E[;72;0;72p\E[;73;0;73p\E[;77;0;77p\E[;80;0;80p\E[;81;0;81p\E[;82;0;82p\E[;83;0;83p, 686 smkx=\E[;71;30p\E[;72;11p\E[;73;27;21p\E[;77;12p\E[;80;10p\E[;81;27;4p\E[;82;27;27;105p\E[;83;127p, 687 use=ansi.sys, 688# 689# Adds ins/del line/character, hence vi reverse scrolls/inserts/deletes nicer. 690nansi.sys|nansisys|PC-DOS Public Domain NANSI.SYS, 691 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 692 is2=U3 PC-DOS Public Domain NANSI.SYS 9-23-86\n, 693 use=ansi.sys, 694# 695# See ansi.sysk and nansi.sys above. 696nansi.sysk|nansisysk|PC-DOS Public Domain NANSI.SYS with keypad redefined for vi, 697 dch1=\E[1P, dl1=\E[1M, ich1=\E[1@, il1=\E[1L, 698 is2=U4 PC-DOS Public Domain NANSI.SYS with keypad redefined for vi 9-29-86\n\E[;75;8p, 699 use=ansi.sysk, 700 701#### Atari ST terminals 702 703# From Guido Flohr <gufl0000@stud.uni-sb.de>. 704# 705tw52|tw52-color|Toswin window manager with color, 706 bce, 707 colors#16, pairs#256, 708 oc=\Eb?\Ec0, op=\Eb?\Ec0, 709 setab=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 710 setaf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 711 setb=\Ec%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 712 setf=\Eb%?%p1%{0}%=%t?%e%p1%{7}%=%t0%e%p1%{15}%=%t7%e%p1%{48}%+%c, 713 use=tw52-m, 714tw52-m|Toswin window manager monochrome, 715 ul, 716 ma#999, 717 bold=\Eya, dch1=\Ea, dim=\EyB, 718 is2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, rev=\EyP, rmso=\EzQ, 719 rmul=\EzH, rs2=\Ev\Eq\Ez_\Ee\Ei\Eb?\Ec0, sgr0=\Ez_, 720 smso=\EyQ, smul=\EyH, use=at-m, 721tt52|Atari TT medium and high resolution, 722 lines#30, use=at-color, 723st52-color|at-color|atari-color|atari_st-color|Atari ST with color, 724 bce, 725 colors#16, pairs#256, 726 is2=\Ev\Eq\Ee\Eb1\Ec0, rs2=\Ev\Eq\Ee\Eb1\Ec0, 727 setab=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 728 setaf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 729 setb=\Ec%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 730 setf=\Eb%?%p1%{0}%=%t1%e%p1%{1}%=%t2%e%p1%{2}%=%t3%e%p1%{3}%=%t>%e%p1%{4}%=%t4%e%p1%{5}%=%t7%e%p1%{6}%=%t5%e%p1%{7}%=%t0%e%p1%{8}%=%t8%e%p1%{9}%=%t9%e%p1%{10}%=%t\:%e%p1%{11}%=%t;%e%p1%{12}%=%t<%e%p1%{13}%=%t=%e%p1%{14}%=%t6%e?, 731 use=st52, 732st52|st52-m|at|at-m|atari|atari-m|atari_st|atarist-m|Atari ST, 733 am, eo, mir, npc, 734 cols#80, it#8, lines#24, 735 bel=^G, civis=\Ef, clear=\EE, cnorm=\Ee, cr=^M, cub1=\ED, 736 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 737 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, el1=\Eo, home=\EH, ht=^I, 738 il1=\EL, ind=^J, is2=\Ev\Eq\Ee, kLFT=\Ed, kRIT=\Ec, kbs=^H, 739 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\177, 740 kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, 741 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EQ, 742 kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, kf6=\EU, kf7=\EV, kf8=\EW, 743 kf9=\EX, khlp=\EH, khome=\EE, kich1=\EI, knp=\Eb, kpp=\Ea, 744 kund=\EK, nel=^M^J, rc=\Ek, rev=\Ep, ri=\EI, rmso=\Eq, 745 rs2=\Ev\Eq\Ee, sc=\Ej, sgr0=\Eq, smso=\Ep, 746tw100|toswin vt100 window mgr, 747 eo, mir, msgr, xon, 748 colors#8, cols#80, it#8, lines#24, pairs#64, vt#3, 749 acsc=++\,\,--..00II``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 750 bel=^G, blink=\E[5m, bold=\E[1m, civis=\Ef, 751 clear=\E[2J\E[H, cnorm=\Ee, cr=^M, csr=\E[%i%p1%d;%p2%dr, 752 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\EB, 753 cuf=\E[%p1%dC, cuf1=\EC, cup=\E[%i%p1%d;%p2%dH, 754 cuu=\E[%p1%dA, cuu1=\EA, dch1=\Ea, dim=\E[2m, dl=\E[%p1%dM, 755 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, 756 hts=\EH, ich=\E[%p1%d@, il1=\EL, ind=^J, is2=\E<\E)0, kbs=^H, 757 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\177, 758 kf1=\EOP, kf10=\EOY, kf11=\Ep, kf12=\Eq, kf13=\Er, kf14=\Es, 759 kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, kf19=\Ex, kf2=\EOQ, 760 kf20=\Ey, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, 761 kf8=\EOW, kf9=\EOX, khlp=\EH, khome=\E\EE, kich1=\EI, 762 knp=\Eb, kpp=\E\Ea, kund=\EK, ll=\E[24H, nel=\EE, 763 oc=\E[30;47m, op=\E[30;47m, rc=\E8, rev=\E[7m, ri=\EM, 764 rmacs=^O, rmcup=\E[?7h, rmir=\Ei, rmkx=\E[?1l\E>, 765 rmso=\E[m, rmul=\E[m, 766 rs1=\E<\E[20l\E[?3;6;9l\E[r\Eq\E(B\017\E)0\E>, 767 sc=\E7, 768 setb=\E[4%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m, 769 setf=\E[3%p1%'0'%+%Pa%?%ga%'0'%=%t0%e%ga%'1'%=%t4%e%ga%'2'%=%t2%e%ga%'3'%=%t6%e%ga%'4'%=%t1%e%ga%'5'%=%t5%e%ga%'6'%=%t3%e7%;m, 770 sgr0=\E[m, smacs=^N, smcup=\E[?7l, smir=\Eh, 771 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 772# The entries for stv52 and stv52pc probably need a revision. 773stv52|MiNT virtual console, 774 am, msgr, 775 cols#80, it#8, lines#30, 776 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, 777 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 778 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", 779 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 780 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 781 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, 782 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, 783 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, 784 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, 785 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, 786 op=\Eb@\EcO, rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, 787 rmso=\Eq, rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, 788 smcup=\Ev\Ee\Ez_, smso=\Ep, smul=\EyH, 789stv52pc|MiNT virtual console with PC charset, 790 am, msgr, 791 cols#80, it#8, lines#30, 792 acsc=+\257\,\256-\^.v0\333I\374`\177a\260f\370g\361h\261j\331k\277l\332m\300n\305o\377p-q\304r-s_t+u+v+w+x\263y\363z\362{\343|\366}\234~\371, 793 bel=^G, blink=\Er, bold=\EyA, civis=\Ef, clear=\EE, 794 cnorm=\E. \Ee, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 795 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E.", 796 dim=\Em, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 797 ind=\n$<2*/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 798 kcuu1=\EA, kdch1=\177, kf1=\EP, kf10=\EY, kf11=\Ep, kf12=\Eq, 799 kf13=\Er, kf14=\Es, kf15=\Et, kf16=\Eu, kf17=\Ev, kf18=\Ew, 800 kf19=\Ex, kf2=\EQ, kf20=\Ey, kf3=\ER, kf4=\ES, kf5=\ET, 801 kf6=\EU, kf7=\EV, kf8=\EW, kf9=\EX, khlp=\EH, khome=\EE, 802 kich1=\EI, knp=\Eb, kpp=\Ea, kund=\EK, nel=\r\n$<2*/>, 803 rev=\Ep, ri=\EI$<2*/>, rmcup=\Ev\E. \Ee\Ez_, rmso=\Eq, 804 rmul=\EzH, rs1=\Ez_\Eb@\EcA, sgr0=\Ez_, smcup=\Ev\Ee\Ez_, 805 smso=\Ep, smul=\EyH, 806 807# From: Simson L. Garfinkel <simsong@media-lab.mit.edu> 808atari-old|atari st, 809 OTbs, am, 810 cols#80, it#8, lines#25, 811 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 812 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 813 ed=\EJ, el=\EK, ht=^I, il1=\EL, kcub1=\ED, kcud1=\EB, 814 kcuf1=\EC, kcuu1=\EA, ri=\EI, rmso=\Eq, sgr0=\Eq, smso=\Ep, 815# UniTerm terminal program for the Atari ST: 49-line VT220 emulation mode 816# From: Paul M. Aoki <aoki@ucbvax.berkeley.edu> 817uniterm|uniterm49|UniTerm VT220 emulator with 49 lines, 818 lines#49, 819 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;49r\E[49;1H, 820 use=vt220, 821# MiNT VT52 emulation. 80 columns, 25 rows. 822# MiNT is Now TOS, the operating system which comes with all Ataris now 823# (mainly Atari Falcon). This termcap is for the VT52 emulation you get 824# under tcsh/zsh/bash/sh/ksh/ash/csh when you run MiNT in `console' mode 825# From: Per Persson <pp@gnu.ai.mit.edu>, 27 Feb 1996 826st52-old|Atari ST with VT52 emulation, 827 am, km, 828 cols#80, lines#25, 829 bel=^G, civis=\Ef, clear=\EH\EJ, cnorm=\Ee, cr=^M, cub1=\ED, 830 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 831 cuu1=\EA, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, il1=\EL, 832 ind=^J, ka1=\E#7, ka3=\E#5, kb2=\E#9, kbs=^H, kc1=\E#1, 833 kc3=\E#3, kclr=\E#7, kcub1=\E#K, kcud1=\E#P, kcuf1=\E#M, 834 kcuu1=\E#H, kf0=\E#D, kf1=\E#;, kf2=\E#<, kf3=\E#=, kf4=\E#>, 835 kf5=\E#?, kf6=\E#@, kf7=\E#A, kf8=\E#B, kf9=\E#C, khome=\E#G, 836 kil1=\E#R, kind=\E#2, kri=\E#8, lf0=f10, nel=^M^J, rc=\Ek, 837 ri=\EI, rmcup=, rmso=\Eq, rs1=\Ez_\Eb@\EcA, sc=\Ej, sgr0=\Eq, 838 smcup=\Ee, smso=\Ep, 839 840#### Apple Terminal.app 841 842# nsterm*|Apple_Terminal - AppKit Terminal.app 843# 844# Terminal.app is a Terminal emulator bundled with NeXT's NeXTStep and 845# OPENSTEP/Mach operating systems, and with Apple's Rhapsody, Mac OS X 846# Server and Mac OS X operating systems. There is also a 847# "terminal.app" in GNUStep, but I believe it to be an unrelated 848# codebase and I have not attempted to describe it here. 849# 850# For NeXTStep, OPENSTEP/Mach, Rhapsody and Mac OS X Server 1.0, you 851# are pretty much on your own. Use "nsterm-7-m" and hope for the best. 852# You might also try "nsterm-7" and "nsterm-old" if you suspect your 853# version supports color. 854# 855# To determine the version of Terminal.app you're using by running: 856# 857# echo "$TERM_PROGRAM" "$TERM_PROGRAM_VERSION" 858# 859# For Apple_Terminal v309+, use "nsterm-256color" (or "nsterm-bce") 860# 861# For Apple_Terminal v200+, use "nsterm-16color" (a.k.a. "nsterm") 862# 863# For Apple_Terminal v71+/v100+, use "nsterm-bce". 864# 865# For Apple_Terminal v51+, use "nsterm-7-c" or "nsterm-7-c-s". 866# 867# For Apple_Terminal v41+, use "nsterm-old", or "nsterm-s". 868# 869# For all earlier versions (Apple_Terminal), try "nsterm-7-m" 870# (monochrome) or "nsterm-7" (color); "nsterm-7-m-s" and "nsterm-7-s" 871# might work too, but really you're on your own here since these 872# systems are very obsolete and I can't test them. I do welcome 873# patches, though :). 874 875# Other Terminals: 876# 877# For GNUstep_Terminal, you're probably best off using "linux" or 878# writing your own terminfo. 879 880# For MacTelnet, you're on your own. It's a different codebase, and 881# seems to be somewhere between "vt102", "ncsa" and "xterm-color". 882 883# For iTerm.app, see "iterm". 884 885# 886# The AppKit Terminal.app descriptions all have names beginning with 887# "nsterm". Note that the statusline (-s) versions use the window 888# titlebar as a phony status line, and may produce warnings during 889# compilation as a result ("tsl uses 0 parameters, expected 1".) 890# Ignore these warnings, or even ignore these entries entirely. Apps 891# which need to position the cursor or do other fancy stuff inside the 892# status line won't work with these entries. They're primarily useful 893# for programs like Pine which provide simple notifications in the 894# status line. Please note that non-ASCII characters don't work right 895# in the status line, since Terminal.app incorrectly interprets their 896# Unicode codepoints as MacRoman codepoints (in earlier Mac OS X 897# versions) or only accepts status lines consisting entirely of 898# characters from the first 256 Unicode positions (including C1 but 899# not C0 or DEL.) 900# 901# The Mythology* of AppKit Terminal.app: 902# 903# In the days of NeXTSTep 0.x and 1.x there were two incompatible 904# bundled terminal emulators, Shell and Terminal. Scott Hess wrote a 905# shareware replacement for Terminal called "Stuart" which NeXT bought 906# and used as the basis for the Terminal.app in NeXTstep 2+, 907# OPENSTEP/Mach, Apple Rhapsody, Mac OS X Server 1.0, and Mac OS X. I 908# don't know the TERM_PROGRAM and TERM_PROGRAM_VERSION settings or 909# capabilities for the early versions, but I believe that the 910# TERM_PROGRAM_VERSION may have been reset at some point. 911# 912# The early versions were tailored to the NeXT character set. Sometime 913# after the Apple aquisition the encoding was swiched to MacRoman 914# (initally with serious altcharset bugs due to incomplete conversion 915# of the old NeXT code,) and then later to UTF-8. Alos sometime during 916# or just prior to the early days of Mac OS X, the Terminal grew ANSI 917# 8-color support (initially buggy when combined with attributes, but 918# that was later fixed.) More recently, around Mac OS X version 10.3 919# or so (Terminal.app v100+) xterm-like 16-color support was added. In 920# some versions (for instance 133-1 which shipped with Mac OS X 921# version 10.4) this suffered from the <bce> bug, but that seems to 922# have been fixed in Mac OS X version 10.5 (Terminal.app v240.2+). 923# 924# In the early days of Mac OS X the terminal was fairly buggy and 925# would routinely crash under load. Many of these bugs seem to have 926# been fixed around Mac OS X version 10.3 (Terminal.app v100+) but 927# some may still remain. This change seems to correspond to 928# Terminal.app reporting "xterm-color" as $TERM rather than "vt100" as 929# it did previously. 930# 931# * This may correspond with what actually happened, but I don't 932# know. It is based on guesswork, hearsay, private correspondence, 933# my faulty memory, and the following online sources and references: 934# 935# [1] "Three Scotts and a Duane" by Simson L. Garfinkel 936# http://www.nextcomputers.org/NeXTfiles/Articles/NeXTWORLD/93.8/93.8.Dec.Community1.html 937# 938# [2] NeXTSTEP entry from Wikipedia, the free encyclopedia 939# https://secure.wikimedia.org/wikipedia/en/wiki/Nextstep 940# 941# * Renamed the AppKit Terminal.app entry from "Apple_Terminal" to 942# "nsterm" to comply with the name length and case conventions and 943# limitations of various software packages [notably Solaris terminfo 944# and UNIX.] A single Apple_Terminal alias is retained for 945# backwards-compatbility. 946# 947# * Added function key support (F1-F4). These only work in Terminal.app 948# version 51, hopefully the capabilities won't cause problems for people 949# using version 41. 950# 951# * Added "full color" (-c) entries which support the 16-color mode in 952# version 51. 953# 954# * By default, version 51 uses UTF-8 encoding with broken altcharset 955# support, so "ASCII" (-7) entries without altcharset support were 956# added. 957 958# nsterm - AppKit Terminal.app 959# 960# Apple's Mac OS X includes a Terminal.app derived from the old NeXT 961# Terminal.app. It is a partial VT100 emulation with some xterm-like 962# extensions. This terminfo was written to describe versions 41 963# (shipped with Mac OS X version 10.0) and 51 (shipped with Mac OS X 964# version 10.1) of Terminal.app. 965# 966# Terminal.app runs under the Mac OS X Quartz windowing system (and 967# other AppKit-supported windowing systems.) On the Mac OS X machine I 968# use, the executable for Terminal.app is: 969# /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal 970# 971# If you're looking for a description of the full-screen system 972# console which runs under Apple's Darwin operating system on PowerPC 973# platforms, see the "xnuppc" entry instead. 974# 975# There were no function keys in version 41. In version 51, there are 976# four working function keys (F1, F2, F3 and F4.) The function keys 977# are included in all of these entries. 978# 979# It does not support mouse pointer position reporting. Under some 980# circumstances the cursor can be positioned using option-click; this 981# works by comparing the cursor position and the selected position, 982# and simulating enough cursor-key presses to move the cursor to the 983# selected position. This technique fails in all but the simplest 984# applications. 985# 986# It provides partial ANSI color support (background colors interacted 987# badly with bold in version 41, though, as reflected in :ncv:.) The 988# monochrome (-m) entries are useful if you've disabled color support 989# or use a monochrome monitor. The full color (-c) entries are useful 990# in version 51, which doesn't exhibit the background color bug. They 991# also enable an xterm-compatible 16-color mode. 992# 993# The configurable titlebar is set using xterm-compatible sequences; 994# it is used as a status bar in the statusline (-s) entries. Its width 995# depends on font sizes and window sizes, but 50 characters seems to 996# be the default for an 80x24 window. 997# 998# The MacRoman character encoding is used for some of the alternate 999# characters in the "MacRoman" entries; the "ASCII" (-7) entries 1000# disable alternate character set support entirely, and the "VT100" 1001# (-acs) entries rely instead on Terminal.app's own buggy VT100 1002# graphics emulation, which seems to think the character encoding is 1003# the old NeXT charset instead of MacRoman. The "ASCII" (-7) entries 1004# are useful in Terminal.app version 51, which supports UTF-8 and 1005# other ASCII-compatible character encodings but does not correctly 1006# implement VT100 graphics; once VT100 graphics are correctly 1007# implemented in Terminal.app, the "VT100" (-acs) entries should be 1008# usable in any ASCII-compatible character encoding [except perhaps 1009# in UTF-8, where some experts argue for disallowing alternate 1010# characters entirely.] 1011# 1012# Terminal.app reports "vt100" as the terminal type, but exports 1013# several environment variables which may aid detection in a shell 1014# profile (i.e. .profile or .login): 1015# 1016# TERM=vt100 1017# TERM_PROGRAM=Apple_Terminal 1018# TERM_PROGRAM_VERSION=41 # in Terminal.app version 41 1019# TERM_PROGRAM_VERSION=51 # in Terminal.app version 51 1020# 1021# For example, the following Bourne shell script would detect the 1022# correct terminal type: 1023# 1024# if [ :"$TERM" = :"vt100" -a :"$TERM_PROGRAM" = :"Apple_Terminal" ] 1025# then 1026# export TERM 1027# if [ :"$TERM_PROGRAM_VERSION" = :41 ] 1028# then 1029# TERM="nsterm-old" 1030# else 1031# TERM="nsterm-c-7" 1032# fi 1033# fi 1034# 1035# In a C shell derivative, this would be accomplished by: 1036# 1037# if ( $?TERM && $?TERM_PROGRAM && $?TERM_PROGRAM_VERSION) then 1038# if ( :"$TERM" == :"vt100" && :"$TERM_PROGRAM" == :"Apple_Terminal" ) then 1039# if ( :"$TERM_PROGRAM_VERSION" == :41 ) then 1040# setenv TERM "nsterm-old" 1041# else 1042# setenv TERM "nsterm-c-7" 1043# endif 1044# endif 1045# endif 1046 1047# The '+' entries are building blocks 1048nsterm+7|AppKit Terminal.app v41+ basic capabilities w/ASCII charset, 1049 am, bw, msgr, xenl, xon, 1050 cols#80, it#8, lines#24, 1051 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 1052 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1053 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 1054 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1055 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 1056 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, 1057 invis=\E[8m, kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 1058 kcuu1=\EOA, kent=\EOM, rc=\E8, rev=\E[7m, ri=\EM, 1059 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 1060 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 1061 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 1062 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 1063 smul=\E[4m, tbc=\E[3g, use=vt100+enq, use=vt100+pfkeys, 1064 1065nsterm+acs|AppKit Terminal.app v41+ basic capabilities w/VT100 alternate-charset, 1066 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1067 enacs=\E(B\E)0, rmacs=^O, 1068 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 1069 sgr0=\E[m\017, smacs=^N, use=nsterm+7, 1070 1071nsterm+mac|AppKit Terminal.app v41+ basic capabilities w/MacRoman alternate-charset, 1072 acsc=+\335\,\334-\366.\3770#`\327a\:f\241g\261h#i\360jjkkllmmnno\370p\370q\321rrssttuuvvwwxxy\262z\263{\271|\255}\243~\245, 1073 enacs=\E(B\E)0, rmacs=^O, 1074 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 1075 sgr0=\E[m\017, smacs=^N, use=nsterm+7, 1076 1077# compare with xterm+sl-twm 1078nsterm+s|AppKit Terminal.app v41+ status-line (window titlebar) support, 1079 wsl#50, use=xterm+sl-twm, 1080 1081nsterm+c|AppKit Terminal.app v51+ full color support (including 16 colors), 1082 op=\E[0m, use=ibm+16color, 1083 1084nsterm+c41|AppKit Terminal.app v41 color support, 1085 colors#8, ncv#37, pairs#64, 1086 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1087 1088# These are different combinations of the building blocks 1089 1090# ASCII charset (-7) 1091nsterm-m-7|nsterm-7-m|AppKit Terminal.app v41+ w/ASCII charset (monochrome), 1092 use=nsterm+7, 1093 1094nsterm-m-s-7|nsterm-7-m-s|AppKit Terminal.app v41+ w/ASCII charset (monochrome w/statusline), 1095 use=nsterm+s, use=nsterm+7, 1096 1097nsterm-7|AppKit Terminal.app v41+ w/ASCII charset (color), 1098 use=nsterm+c41, use=nsterm+7, 1099 1100nsterm-7-c|nsterm-c-7|AppKit Terminal.app v51+ w/ASCII charset (full color), 1101 use=nsterm+c, use=nsterm+7, 1102 1103nsterm-s-7|nsterm-7-s|AppKit Terminal.app v41+ w/ASCII charset (color w/statusline), 1104 use=nsterm+s, use=nsterm+c41, use=nsterm+7, 1105 1106nsterm-c-s-7|nsterm-7-c-s|AppKit Terminal.app v51+ w/ASCII charset (full color w/statusline), 1107 use=nsterm+s, use=nsterm+c, use=nsterm+7, 1108 1109# VT100 alternate-charset (-acs) 1110nsterm-m-acs|nsterm-acs-m|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome), 1111 use=nsterm+acs, 1112 1113nsterm-m-s-acs|nsterm-acs-m-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (monochrome w/statusline), 1114 use=nsterm+s, use=nsterm+acs, 1115 1116nsterm-acs|AppKit Terminal.app v41+ w/VT100 alternate-charset (color), 1117 use=nsterm+c41, use=nsterm+acs, 1118 1119nsterm-c-acs|nsterm-acs-c|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color), 1120 use=nsterm+c, use=nsterm+acs, 1121 1122nsterm-s-acs|nsterm-acs-s|AppKit Terminal.app v41+ w/VT100 alternate-charset (color w/statusline), 1123 use=nsterm+s, use=nsterm+c41, use=nsterm+acs, 1124 1125nsterm-c-s-acs|nsterm-acs-c-s|AppKit Terminal.app v51+ w/VT100 alternate-charset (full color w/statusline), 1126 use=nsterm+s, use=nsterm+c, use=nsterm+acs, 1127 1128# MacRoman charset 1129nsterm-m|AppKit Terminal.app v41+ w/MacRoman charset (monochrome), 1130 use=nsterm+mac, 1131 1132nsterm-m-s|AppKit Terminal.app v41+ w/MacRoman charset (monochrome w/statusline), 1133 use=nsterm+s, use=nsterm+mac, 1134 1135nsterm-old|AppKit Terminal.app v41+ w/MacRoman charset (color), 1136 use=nsterm+c41, use=nsterm+mac, 1137 1138nsterm-c|AppKit Terminal.app v51+ w/MacRoman charset (full color), 1139 use=nsterm+c, use=nsterm+mac, 1140 1141nsterm-s|AppKit Terminal.app v41+ w/MacRoman charset (color w/statusline), 1142 use=nsterm+s, use=nsterm+c41, use=nsterm+mac, 1143 1144nsterm-c-s|AppKit Terminal.app v51+ w/MacRoman charset (full color w/statusline), 1145 use=nsterm+s, use=nsterm+c, use=nsterm+mac, 1146 1147# In Mac OS X version 10.5 the format of the preferences has changed 1148# and a new, more complex technique is needed, e.g., 1149# 1150# python -c 'import sys,objc;NSUserDefaults=objc.lookUpClass( 1151# "NSUserDefaults");ud=NSUserDefaults.alloc(); 1152# ud.init();prefs=ud.persistentDomainForName_( 1153# "com.apple.Terminal");prefs["Window Settings"][ 1154# prefs["Default Window Settings"]]["TerminalType" 1155# ]=sys.argv[1];ud.setPersistentDomain_forName_(prefs, 1156# "com.apple.Terminal")' nsterm-16color 1157# 1158# and it is still not settable from the preferences dialog. This is 1159# tracked under rdar://problem/7365108 and rdar://problem/7365134 1160# in Apple's bug reporter. 1161# 1162# In OS X 10.7 (Leopard) the TERM which can be set in the preferences dialog 1163# defaults to xterm-color. Alternative selections are ansi, dtterm, rxvt, 1164# vt52, vt100, vt102 and xterm. 1165nsterm-16color|AppKit Terminal.app v240.2+ with Mac OS X version 10.5, 1166 bw@, mir, npc, 1167 civis=\E[?25l, cnorm=\E[?25h, dch=\E[%p1%dP, dch1=\E[P, 1168 flash=\E[?5h$<200/>\E[?5l, hpa=\E[%i%p1%dG, 1169 ich=\E[%p1%d@, ich1=\E[@, kdch1=\E[3~, kend=\E[F, 1170 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 1171 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 1172 kf18=\E[22~, kf19=\E[33~, kf20=\E[34~, kf5=\E[15~, 1173 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, 1174 knp=\E[6~, kpp=\E[5~, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 1175 smcup=\E7\E[?47h, smir=\E[4h, vpa=\E[%i%p1%dd, 1176 kLFT5=\E[5D, kRIT5=\E[5C, use=nsterm-c-s-acs, 1177 1178# The versions of Terminal.app in Mac OS X version 10.3.x seem to have 1179# the background color erase feature. The newer version 240.2 in Mac OS X 1180# version 10.5 does not. 1181# 1182# This entry is based on newsgroup comments by Alain Bench, Christian Ebert, 1183# and D P Schreber comparing to nsterm-c-s-acs. 1184# 1185# In Mac OS X version 10.4 and earlier, D P Schreber notes that $TERM 1186# can be set in Terminal.app, e.g., 1187# 1188# defaults write com.apple.Terminal TermCapString nsterm-bce 1189# 1190# and that it is not set in Terminal's preferences dialog. 1191# 1192# Modified for OS X 10.8, omitting bw based on testing with tack -TD 1193# 1194# Notes: 1195# * The terminal description matches the default settings. 1196# * The keyboard is configurable via a dialog. 1197# * By default khome, kend, knext and kprev are honored only with a 1198# shift-modifier. 1199# * There are bindings for control left/right arrow (but not up/down). 1200# Added those to nsterm-16color, which is the version used for OS X 10.6 1201# * "Allow VT100 application keypage mode" is by default disabled. 1202# There is no way to press keypad-comma unless application mode is enabled 1203# and used. 1204# * 132-column mode stopped working during vttest's tests. Consider it broken. 1205# * CHT, REP, SU, SD are buggy. 1206# * ECH works (also in Leopard), but is not used here for compatibility. 1207# * The terminal preferences dialog replaces xterm-color by xterm-16color and 1208# xterm-256color. However, it adds "nsterm", so it is possible to use the 1209# nsterm entry from this file to override the MacPorts (20110404) or 1210# system (20081102) copy of this file. 1211# + In OS X 10.8 (Mountain Lion) the TERM which can be set in the preferences 1212# dialog defaults to xterm-256color. Alternative selections are ansi, 1213# dtterm, rxvt, vt52, vt100, vt102, xterm and xterm-16color. However, 1214# the menu says "Declare terminal as" without promising to actually emulate 1215# the corresponding terminals. Indeed, changing TERM does not affect the 1216# emulation itself. This means that 1217# + the function-keys do not match for dtterm for kf1-kf4 as well as 1218# khome/kend 1219# + the color model is the same for each setting of TERM (does not match 1220# ansi or dtterm). 1221# + the shift/control/meta key modifiers from rxvt and xterm variants are not 1222# recognised except for a few special cases, i.e., kRIT5 and kLFT5. 1223# + the vt52 emulation does not give a usable shell because screen-clearing 1224# does not work as expected. 1225# + selecting "xterm" or "xterm-16color" sets TERM to "xterm-256color". 1226nsterm-bce|AppKit Terminal.app v71+/v100.1.8+ with Mac OS X version 10.3/10.4 (bce), 1227 bce, use=nsterm-16color, 1228 1229# This is tested with OS X 10.8 (Mountain Lion), 2012/08/11 1230# TERM_PROGRAM_VERSION=309 1231# Earlier reports state that these differences also apply to OS X 10.7 (Lion), 1232# TERM_PROGRAM_VERSION=303 1233nsterm-256color|Terminal.app in OS X 10.8, 1234 ccc@, 1235 initc@, use=xterm+256color, use=nsterm-bce, 1236 1237# This is an alias which should always point to the "current" version 1238nsterm|Apple_Terminal|AppKit Terminal.app, 1239 use=nsterm-256color, 1240 1241# iTerm.app from http://iterm.sourceforge.net/ is an alternative (and 1242# more featureful) terminal emulator for Mac OS X. It is similar 1243# enough in capabilities to nsterm-16color that I have derived this 1244# description from that one, but as far as I know they share no code. 1245# Many of the features are user-configurable, but I attempt only to 1246# describe the default configuration. 1247# 1248# NOTE: When tack tests (csr) + (nel) iTerm.app crashes, so (csr) is 1249# disabled. 1250iTerm.app|iTerm.app terminal emulator for Mac OS X, 1251 bce, bw@, ccc@, 1252 csr@, initc@, kend=\EOF, khome=\EOH, use=xterm+256color, 1253 use=nsterm-16color, 1254 1255# xnuppc - Darwin PowerPC Console (a.k.a. "darwin") 1256# 1257# On PowerPC platforms, Apple's Darwin operating system uses a 1258# full-screen system console derived from a NetBSD framebuffer 1259# console. It is an ANSI-style terminal, and is not really VT-100 1260# compatible. 1261# 1262# Under Mac OS X, this is the system console driver used while in 1263# single-user mode [reachable by holding down Command-S during the 1264# boot process] and when logged in using console mode [reachable by 1265# typing ">console" at the graphical login prompt.] 1266# 1267# If you're looking for a description of the Terminal.app terminal 1268# emulator which runs under the Mac OS X Quartz windowing system (and 1269# other AppKit-supported windowing systems,) see the "nsterm" 1270# entry instead. 1271# 1272# NOTE: Under Mac OS X version 10.1, the default login window does not 1273# prompt for user name, instead requiring an icon to be selected from 1274# a list of known users. Since the special ">console" login is not in 1275# this list, you must make one of two changes in the Login Window 1276# panel of the Login section of System Prefs to make the special 1277# ">console" login accessible. The first option is to enable 'Show 1278# "Other User" in list for network users', which will add a special 1279# "Other..." icon to the graphical login panel. Selecting "Other..." 1280# will present the regular graphical login prompt. The second option 1281# is to change the 'Display Login Window as:' setting to 'Name and 1282# password entry fields', which replaces the login panel with a 1283# graphical login prompt. 1284# 1285# There are no function keys, at least not in Darwin 1.3. 1286# 1287# It has no mouse support. 1288# 1289# It has full ANSI color support, and color combines correctly with 1290# all three supported attributes: bold, inverse-video and underline. 1291# However, bold colored text is almost unreadable (bolding is 1292# accomplished using shifting and or-ing, and looks smeared) so bold 1293# has been excluded from the list of color-compatible attributes 1294# [using (ncv)]. The monochrome entry (-m) is useful if you use a 1295# monochrome monitor. 1296# 1297# There is one serious bug with this terminal emulation's color 1298# support: repositioning the cursor onto a cell with non-matching 1299# colors obliterates that cell's contents, replacing it with a blank 1300# and displaying a colored cursor in the "current" colors. There is 1301# no complete workaround at present [other than using the monochrome 1302# (-m) entries,] but removing the (msgr) capability seemed to help. 1303# 1304# The "standout" chosen was simple reverse-video, although a colorful 1305# standout might be more aesthetically pleasing. Similarly, the bold 1306# chosen is the terminal's own smeared bold, although a simple 1307# color-change might be more readable. The color-bold (-b) entries 1308# uses magenta colored text for bolding instead. The fancy color (-f 1309# and -f2) entries use color for bold, standout and underlined text 1310# (underlined text is still underlined, though.) 1311# 1312# Apparently the terminal emulator does support a VT-100-style 1313# alternate character set, but all the alternate character set 1314# positions have been left blank in the font. For this reason, no 1315# alternate character set capabilities have been included in this 1316# description. The console driver appears to be ASCII-only, so (enacs) 1317# has been excluded [although the VT-100 sequence does work.] 1318# 1319# The default Mac OS X and Darwin installation reports "vt100" as the 1320# terminal type, and exports no helpful environment variables. To fix 1321# this, change the "console" entry in /etc/ttys from "vt100" to 1322# "xnuppc-WxH", where W and H are the character dimensions of your 1323# console (see below.) 1324# 1325# The font used by the terminal emulator is apparently one originally 1326# drawn by Ka-Ping Yee, and uses 8x16-pixel characters. This 1327# file includes descriptions for the following geometries: 1328# 1329# Pixels Characters Entry Name (append -m for monochrome) 1330# ------------------------------------------------------------------- 1331# 640x400 80x25 xnuppc-80x25 1332# 640x480 80x30 xnuppc-80x30 1333# 720x480 90x30 xnuppc-90x30 1334# 800x600 100x37 xnuppc-100x37 1335# 896x600 112x37 xnuppc-112x37 1336# 1024x640 128x40 xnuppc-128x40 1337# 1024x768 128x48 xnuppc-128x48 1338# 1152x768 144x48 xnuppc-144x48 1339# 1280x1024 160x64 xnuppc-160x64 1340# 1600x1024 200x64 xnuppc-200x64 1341# 1600x1200 200x75 xnuppc-200x75 1342# 2048x1536 256x96 xnuppc-256x96 1343# 1344# The basic "xnuppc" entry includes no size information, and the 1345# emulator includes no reporting capability, so you'll be at the mercy 1346# of the TTY device (which reports incorrectly on my hardware.) The 1347# color-bold entries do not include size information. 1348 1349# The '+' entries are building blocks 1350xnuppc+basic|Darwin PowerPC Console basic capabilities, 1351 am, bce, mir, xenl, 1352 it#8, 1353 bold=\E[1m, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 1354 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 1355 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1356 cuu=\E[%p1%dA, cuu1=\E[A, dsl=\E]2;\007, ed=\E[J, el=\E[K, 1357 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=\177, 1358 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, 1359 rev=\E[7m, ri=\EM, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, 1360 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1361 sc=\E7, 1362 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 1363 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 1364 smul=\E[4m, tbc=\E[3g, use=vt100+keypad, 1365 1366xnuppc+c|Darwin PowerPC Console ANSI color support, 1367 colors#8, ncv#32, pairs#64, 1368 op=\E[37;40m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1369 1370xnuppc+b|Darwin PowerPC Console color-bold support, 1371 ncv#32, 1372 bold=\E[35m, 1373 sgr=\E[0%?%p6%t;35%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 1374 use=xnuppc+basic, 1375 1376xnuppc+f|Darwin PowerPC Console fancy color support, 1377 ncv#35, 1378 sgr=\E[0%?%p6%t;35%;%?%p2%t;36;4%;%?%p1%t;33;44%;%?%p3%t;7%;m, 1379 smso=\E[33;44m, smul=\E[36;4m, use=xnuppc+b, 1380 1381xnuppc+f2|Darwin PowerPC Console alternate fancy color support, 1382 ncv#35, 1383 bold=\E[33m, 1384 sgr=\E[0%?%p6%t;33%;%?%p2%t;34%;%?%p1%t;31;47%;%?%p3%t;7%;m, 1385 smso=\E[31;47m, smul=\E[34m, use=xnuppc+basic, 1386 1387# Building blocks for specific screen sizes 1388xnuppc+80x25|Darwin PowerPC Console 80x25 support (640x400 pixels), 1389 cols#80, lines#25, 1390 1391xnuppc+80x30|Darwin PowerPC Console 80x30 support (640x480 pixels), 1392 cols#80, lines#30, 1393 1394xnuppc+90x30|Darwin PowerPC Console 90x30 support (720x480 pixels), 1395 cols#90, lines#30, 1396 1397xnuppc+100x37|Darwin PowerPC Console 100x37 support (800x600 pixels), 1398 cols#100, lines#37, 1399 1400xnuppc+112x37|Darwin PowerPC Console 112x37 support (896x600 pixels), 1401 cols#112, lines#37, 1402 1403xnuppc+128x40|Darwin PowerPC Console 128x40 support (1024x640 pixels), 1404 cols#128, lines#40, 1405 1406xnuppc+128x48|Darwin PowerPC Console 128x48 support (1024x768 pixels), 1407 cols#128, lines#48, 1408 1409xnuppc+144x48|Darwin PowerPC Console 144x48 support (1152x768 pixels), 1410 cols#144, lines#48, 1411 1412xnuppc+160x64|Darwin PowerPC Console 160x64 support (1280x1024 pixels), 1413 cols#160, lines#64, 1414 1415xnuppc+200x64|Darwin PowerPC Console 200x64 support (1600x1024 pixels), 1416 cols#200, lines#64, 1417 1418xnuppc+200x75|Darwin PowerPC Console 200x75 support (1600x1200 pixels), 1419 cols#200, lines#75, 1420 1421xnuppc+256x96|Darwin PowerPC Console 256x96 support (2048x1536 pixels), 1422 cols#256, lines#96, 1423 1424# These are different combinations of the building blocks 1425 1426xnuppc-m|darwin-m|Darwin PowerPC Console (monochrome), 1427 use=xnuppc+basic, 1428 1429xnuppc|darwin|Darwin PowerPC Console (color), 1430 use=xnuppc+c, use=xnuppc+basic, 1431 1432xnuppc-m-b|darwin-m-b|Darwin PowerPC Console (monochrome w/color-bold), 1433 use=xnuppc+b, 1434 1435xnuppc-b|darwin-b|Darwin PowerPC Console (color w/color-bold), 1436 use=xnuppc+b, use=xnuppc+c, 1437 1438xnuppc-m-f|darwin-m-f|Darwin PowerPC Console (fancy monochrome), 1439 use=xnuppc+f, 1440 1441xnuppc-f|darwin-f|Darwin PowerPC Console (fancy color), 1442 use=xnuppc+f, use=xnuppc+c, 1443 1444xnuppc-m-f2|darwin-m-f2|Darwin PowerPC Console (alternate fancy monochrome), 1445 use=xnuppc+f2, 1446 1447xnuppc-f2|darwin-f2|Darwin PowerPC Console (alternate fancy color), 1448 use=xnuppc+f2, use=xnuppc+c, 1449 1450# Combinations for specific screen sizes 1451xnuppc-80x25-m|darwin-80x25-m|Darwin PowerPC Console (monochrome) 80x25, 1452 use=xnuppc+80x25, use=xnuppc+basic, 1453 1454xnuppc-80x25|darwin-80x25|Darwin PowerPC Console (color) 80x25, 1455 use=xnuppc+c, use=xnuppc+80x25, use=xnuppc+basic, 1456 1457xnuppc-80x30-m|darwin-80x30-m|Darwin PowerPC Console (monochrome) 80x30, 1458 use=xnuppc+80x30, use=xnuppc+basic, 1459 1460xnuppc-80x30|darwin-80x30|Darwin PowerPC Console (color) 80x30, 1461 use=xnuppc+c, use=xnuppc+80x30, use=xnuppc+basic, 1462 1463xnuppc-90x30-m|darwin-90x30-m|Darwin PowerPC Console (monochrome) 90x30, 1464 use=xnuppc+90x30, use=xnuppc+basic, 1465 1466xnuppc-90x30|darwin-90x30|Darwin PowerPC Console (color) 90x30, 1467 use=xnuppc+c, use=xnuppc+90x30, use=xnuppc+basic, 1468 1469xnuppc-100x37-m|darwin-100x37-m|Darwin PowerPC Console (monochrome) 100x37, 1470 use=xnuppc+100x37, use=xnuppc+basic, 1471 1472xnuppc-100x37|darwin-100x37|Darwin PowerPC Console (color) 100x37, 1473 use=xnuppc+c, use=xnuppc+100x37, use=xnuppc+basic, 1474 1475xnuppc-112x37-m|darwin-112x37-m|Darwin PowerPC Console (monochrome) 112x37, 1476 use=xnuppc+112x37, use=xnuppc+basic, 1477 1478xnuppc-112x37|darwin-112x37|Darwin PowerPC Console (color) 112x37, 1479 use=xnuppc+c, use=xnuppc+112x37, use=xnuppc+basic, 1480 1481xnuppc-128x40-m|darwin-128x40-m|Darwin PowerPC Console (monochrome) 128x40, 1482 use=xnuppc+128x40, use=xnuppc+basic, 1483 1484xnuppc-128x40|darwin-128x40|Darwin PowerPC Console (color) 128x40, 1485 use=xnuppc+c, use=xnuppc+128x40, use=xnuppc+basic, 1486 1487xnuppc-128x48-m|darwin-128x48-m|Darwin PowerPC Console (monochrome) 128x48, 1488 use=xnuppc+128x48, use=xnuppc+basic, 1489 1490xnuppc-128x48|darwin-128x48|Darwin PowerPC Console (color) 128x48, 1491 use=xnuppc+c, use=xnuppc+128x48, use=xnuppc+basic, 1492 1493xnuppc-144x48-m|darwin-144x48-m|Darwin PowerPC Console (monochrome) 144x48, 1494 use=xnuppc+144x48, use=xnuppc+basic, 1495 1496xnuppc-144x48|darwin-144x48|Darwin PowerPC Console (color) 144x48, 1497 use=xnuppc+c, use=xnuppc+144x48, use=xnuppc+basic, 1498 1499xnuppc-160x64-m|darwin-160x64-m|Darwin PowerPC Console (monochrome) 160x64, 1500 use=xnuppc+160x64, use=xnuppc+basic, 1501 1502xnuppc-160x64|darwin-160x64|Darwin PowerPC Console (color) 160x64, 1503 use=xnuppc+c, use=xnuppc+160x64, use=xnuppc+basic, 1504 1505xnuppc-200x64-m|darwin-200x64-m|Darwin PowerPC Console (monochrome) 200x64, 1506 use=xnuppc+200x64, use=xnuppc+basic, 1507 1508xnuppc-200x64|darwin-200x64|Darwin PowerPC Console (color) 200x64, 1509 use=xnuppc+c, use=xnuppc+200x64, use=xnuppc+basic, 1510 1511xnuppc-200x75-m|darwin-200x75-m|Darwin PowerPC Console (monochrome) 200x75, 1512 use=xnuppc+200x75, use=xnuppc+basic, 1513 1514xnuppc-200x75|darwin-200x75|Darwin PowerPC Console (color) 200x75, 1515 use=xnuppc+c, use=xnuppc+200x75, use=xnuppc+basic, 1516 1517xnuppc-256x96-m|darwin-256x96-m|Darwin PowerPC Console (monochrome) 256x96, 1518 use=xnuppc+256x96, use=xnuppc+basic, 1519 1520xnuppc-256x96|darwin-256x96|Darwin PowerPC Console (color) 256x96, 1521 use=xnuppc+c, use=xnuppc+256x96, use=xnuppc+basic, 1522 1523 1524#### BeOS 1525# 1526# BeOS entry for Terminal program Seems to be almost ANSI 1527beterm|BeOS Terminal, 1528 am, eo, mir, msgr, xenl, xon, 1529 colors#8, cols#80, it#8, lines#25, ncv#5, pairs#64, 1530 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 1531 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 1532 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 1533 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 1534 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 1535 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, 1536 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 1537 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 1538 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 1539 kend=\E[4~, kf1=\E[11~, kf10=\E[20~, kf11=\E[21~, 1540 kf12=\E[22~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 1541 kf5=\E[15~, kf6=\E[16~, kf7=\E[17~, kf8=\E[18~, kf9=\E[19~, 1542 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 1543 nel=^M^J, op=\E[m, rc=\E8, rev=\E[7m, ri=\EM, rmir=\E[4l, 1544 rmkx=\E[?4l, rmso=\E[m, rmul=\E[24m, rs1=\Ec, sc=\E7, 1545 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1546 setb=\E[%p1%{40}%+%cm, setf=\E[%p1%{30}%+%cm, 1547 sgr0=\E[0;10m, smir=\E[4h, smkx=\E[?4h, smso=\E[7m, 1548 smul=\E[4m, u6=\E[%i%p1%d;%p2%dR, u7=\E[6n, 1549 vpa=\E[%i%p1%dd, 1550 1551#### Linux consoles 1552# 1553 1554# This entry is good for the 1.2.13 or later version of the Linux console. 1555# 1556# *************************************************************************** 1557# * * 1558# * WARNING: * 1559# * Linuxes come with a default keyboard mapping kcbt=^I. This entry, in * 1560# * response to user requests, assumes kcbt=\E[Z, the ANSI/ECMA reverse-tab * 1561# * character. Here are the keymap replacement lines that will set this up: * 1562# * * 1563# keycode 15 = Tab Tab 1564# alt keycode 15 = Meta_Tab 1565# shift keycode 15 = F26 1566# string F26 ="\033[Z" 1567# * * 1568# * This has to use a key slot which is unfortunate (any unused one will * 1569# * do, F26 is the higher-numbered one). The change ought to be built * 1570# * into the kernel tables. * 1571# * * 1572# *************************************************************************** 1573# 1574# All linux kernels since 1.2.13 (at least) set the screen size 1575# themselves; this entry assumes that capability. 1576# 1577linux-basic|linux console, 1578 am, bce, eo, mir, msgr, xenl, xon, 1579 it#8, ncv#18, U8#1, 1580 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 1581 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 1582 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 1583 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1584 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 1585 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 1586 el=\E[K, el1=\E[1K, flash=\E[?5h\E[?5l$<200/>, home=\E[H, 1587 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 1588 il=\E[%p1%dL, il1=\E[L, ind=^J, kb2=\E[G, kbs=\177, 1589 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1590 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 1591 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 1592 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 1593 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 1594 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 1595 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 1596 kspd=^Z, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, 1597 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, sc=\E7, 1598 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;11%;m, 1599 smam=\E[?7h, smir=\E[4h, smul=\E[4m, tbc=\E[3g, 1600 vpa=\E[%i%p1%dd, use=vt102+enq, use=klone+sgr, 1601 use=ecma+color, 1602 1603linux-m|Linux console no color, 1604 colors@, pairs@, 1605 setab@, setaf@, setb@, setf@, use=linux, 1606 1607# The 1.3.x kernels add color-change capabilities; if yours doesn't have this 1608# and it matters, turn off <ccc>. The %02x escape used to implement this is 1609# not supposedly back-portable to older SV curses (although it has worked fine 1610# on Solaris for several years) and not supported in ncurses versions before 1611# 1.9.9. 1612linux-c-nc|linux console with color-change, 1613 ccc, 1614 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, 1615 oc=\E]R, use=linux-basic, 1616# From: Dennis Henriksen <opus@osrl.dk>, 9 July 1996 1617linux-c|linux console 1.3.6+ for older ncurses, 1618 ccc, 1619 initc=\E]P%?%p1%{9}%>%t%p1%{10}%-%'a'%+%c%e%p1%d%;%p2%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p3%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%p4%{255}%*%{1000}%/%Pr%gr%{16}%/%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;%gr%{15}%&%Px%?%gx%{9}%>%t%gx%{10}%-%'a'%+%c%e%gx%d%;, 1620 oc=\E]R, use=linux-basic, 1621 1622# The 2.2.x kernels add a private mode that sets the cursor type; use that to 1623# get a block cursor for cvvis. 1624# reported by Frank Heckenbach <frank@g-n-u.de>. 1625linux2.2|linux 2.2.x console, 1626 civis=\E[?25l\E[?1c, cnorm=\E[?25h\E[?0c, 1627 cvvis=\E[?25h\E[?8c, use=linux-c-nc, 1628 1629# Linux 2.6.x has a fix for SI/SO to work with UTF-8 encoding added here: 1630# http://lkml.indiana.edu/hypermail/linux/kernel/0602.2/0868.html 1631# Using SI/SO has the drawback that it confuses screen. SCS would work. 1632# However, SCS is buggy (see comment in Debian #515609) -TD 1633# Further, this breaks longstanding workarounds for Linux console's line 1634# drawing (see Debian 665959) -TD 1635linux2.6|linux 2.6.x console, 1636 rmacs=^O, 1637 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;m%?%p9%t\016%e\017%;, 1638 sgr0=\E[m\017, smacs=^N, use=linux2.2, 1639 1640# The 3.0 kernel adds support for clearing scrollback buffer (capability E3). 1641# It is the same as xterm's erase-saved-lines feature. 1642linux3.0|linux 3.0 kernels, 1643 E3=\E[3;J, use=linux2.6, 1644 1645# This is Linux console for ncurses. 1646linux|linux console, 1647 use=linux2.2, 1648 1649# Subject: linux 2.6.26 vt back_color_erase 1650# Changes to the Linux console driver broke bce model as reported in 1651# https://bugzilla.novell.com/show_bug.cgi?id=418613 1652# apparently from 1653# http://lkml.org/lkml/2008/4/26/305 1654# http://lkml.org/lkml/2008/10/3/66 1655linux2.6.26|linux console w/o bce, 1656 bce@, use=linux2.6, 1657 1658# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file 1659linux-nic|linux with ich/ich1 suppressed for non-curses programs, 1660 ich@, ich1@, use=linux, 1661 1662# This assumes you have used setfont(8) to load one of the Linux koi8-r fonts. 1663# acsc entry from Pavel Roskin" <pavel@absolute.spb.su>, 29 Sep 1997. 1664linux-koi8|linux with koi8 alternate character set, 1665 acsc=+\020\,\021-\030.^Y0\215`\004a\221f\234g\237h\220i\276j\205k\203l\202m\204n\212o~p\0q\0r\0s_t\206u\207v\211w\210x\201y\230z\231{\267|\274~\224, 1666 use=linux, use=klone+koi8acs, 1667 1668# Another entry for KOI8-r with Qing Long's acsc. 1669# (which one better complies with the standard?) 1670linux-koi8r|linux with koi8-r alternate character set, 1671 use=linux, use=klone+koi8acs, 1672 1673# Entry for the latin1 and latin2 fonts 1674linux-lat|linux with latin1 or latin2 alternate character set, 1675 acsc=+\020\,\021-\030.^Y0\333`\004a\013f\370g\361h\260i\316j\211k\214l\206m\203n\305o~p\304q\212r\304s_t\207u\215v\301w\302x\205y\363z\362{\343|\330}\234~\376, 1676 use=linux, 1677 1678# This uses graphics from VT codeset instead of from cp437. 1679# reason: cp437 (aka "straight to font") is not functional under luit. 1680# from: Andrey V Lukyanov <land@long.yar.ru>. 1681linux-vt|linux console using VT codes for graphics, 1682 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 1683 rmacs=\E(K, rmpch@, sgr@, sgr0=\E[0m\E(K\017, smacs=\E(0, 1684 smpch@, use=linux, 1685 1686# This is based on the Linux console (relies on the console to perform some 1687# of the functionality), but does not recognize as many control sequences. 1688# The program comes bundled with an old (circa 1998) copy of the Linux 1689# console terminfo. It recognizes some non-ANSI/VT100 sequences such as 1690# \E* move cursor to home, as as \E[H 1691# \E,X same as \E(X 1692# \EE move cursor to beginning of row 1693# \E[y,xf same as \E[y,xH 1694# 1695# Note: The status-line support is buggy (dsl does not work). 1696kon|kon2|jfbterm|Kanji ON Linux console, 1697 ccc@, hs, 1698 civis@, cnorm@, cvvis@, dsl=\E[?H, flash@, fsl=\E[?F, initc@, 1699 initp@, kcbt@, oc@, op=\E[37;40m, rs1=\Ec, tsl=\E[?T, 1700 use=linux, 1701 1702# 16-color linux console entry; this works with a 256-character 1703# console font but bright background colors turn into dim ones when 1704# you use a 512-character console font. This uses bold for bright 1705# foreground colors and blink for bright background colors. 1706linux-16color|linux console with 16 colors, 1707 colors#16, ncv#63, pairs#256, 1708 setab=\E[4%p1%{8}%m%d%?%p1%{7}%>%t;5%e;25%;m, 1709 setaf=\E[3%p1%{8}%m%d%?%p1%{7}%>%t;1%e;21%;m, 1710 use=linux, 1711 1712# bterm (bogl 0.1.18) 1713# Implementation is in bogl-term.c 1714# Key capabilities from linux terminfo entry 1715# 1716# Notes: 1717# bterm only supports acs using wide-characters, has case for these: qjxamlkut 1718# bterm does not support sgr, since it only processes one parameter -TD 1719bterm|bogl virtual terminal, 1720 am, bce, 1721 colors#8, cols#80, lines#24, pairs#64, 1722 acsc=aajjkkllmmqqttuuxx, bold=\E[1m, civis=\E[?25l, 1723 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, 1724 cup=\E[%i%p1%d;%p2%dH, ed=\E[J, el=\E[K, home=\E[H, ind=^J, 1725 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 1726 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, 1727 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 1728 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 1729 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, 1730 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 1731 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 1732 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, 1733 op=\E[49m\E[39m, rev=\E[7m, ri=\EM, rmacs=^O, rmso=\E[27m, 1734 rmul=\E[24m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1735 sgr0=\E[0m, smacs=^N, smso=\E[7m, smul=\E[4m, 1736 1737#### Mach 1738# 1739 1740# From: Matthew Vernon <mcv21@pick.sel.cam.ac.uk> 1741mach|Mach Console, 1742 am, km, 1743 cols#80, it#8, lines#25, 1744 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, 1745 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 1746 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1747 cuu=\E[%p1%dA, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 1748 el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, 1749 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 1750 kdch1=\E[9, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf2=\EOQ, 1751 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 1752 kf9=\EOX, khome=\E[H, kich1=\E[@, kll=\E[F, knp=\E[U, 1753 kpp=\E[V, rev=\E[7m, rmso=\E[0m, rmul=\E[24m, sgr0=\E[0m, 1754 smso=\E[7m, smul=\E[4m, 1755mach-bold|Mach Console with bold instead of underline, 1756 rmul=\E[0m, smul=\E[1m, use=mach, 1757mach-color|Mach Console with ANSI color, 1758 colors#8, pairs#64, 1759 dim=\E[2m, invis=\E[8m, op=\E[37;40m, rmso=\E[27m, 1760 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=mach, 1761 1762# From: Samuel Thibault 1763# Source: git://git.sv.gnu.org/hurd/gnumach.git 1764# Files: i386/i386at/kd.c 1765# 1766# Added nel, hpa, sgr and removed rmacs, smacs based on source -TD 1767mach-gnu|GNU Mach, 1768 acsc=+>\,<-\^.v0\333`+a\261f\370g\361h\260i#j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 1769 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, 1770 el1=\E[1K, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, ich1=\E[@, 1771 indn=\E[%p1%dS, invis=\E[8m, nel=\EE, rin=\E[%p1%dT, 1772 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m, 1773 use=mach, 1774 1775mach-gnu-color|Mach Console with ANSI color, 1776 colors#8, pairs#64, 1777 op=\E[37;40m, rmso=\E[27m, setab=\E[4%p1%dm, 1778 setaf=\E[3%p1%dm, use=mach-gnu, 1779 1780# From: Marcus Brinkmann 1781# http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/hurd/hurd/console/ 1782# 1783# Comments in the original are summarized here: 1784# 1785# hurd uses 8-bit characters (km). 1786# 1787# Although it doesn't do XON/XOFF, we don't want padding characters (xon). 1788# 1789# Regarding compatibility to vt100: hurd doesn't specify <xenl>, as we don't 1790# have the eat_newline_glitch. It doesn't support setting or removing tab 1791# stops (hts/tbc). 1792# 1793# hurd uses ^H instead of \E[D for cub1, as only ^H implements <bw> and it is 1794# one byte instead three. 1795# 1796# <ich1> is not included because hurd has insert mode. 1797# 1798# hurd doesn't use ^J for scrolling, because this could put things into the 1799# scrollback buffer. 1800# 1801# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode. 1802# This is a GNU extension. 1803# 1804# The original has commented-out ncv, but is restored here. 1805# 1806# Reading the source, RIS resets cnorm, but not xmous. 1807hurd|The GNU Hurd console server, 1808 am, bce, bw, eo, km, mir, msgr, xenl, xon, 1809 colors#8, it#8, ncv#18, pairs#64, 1810 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1811 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 1812 clear=\Ec, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 1813 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 1814 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 1815 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[34l, dch=\E[%p1%dP, 1816 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 1817 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, flash=\Eg, 1818 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 1819 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, 1820 invis=\E[8m, kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\EOD, 1821 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, 1822 kend=\E[4~, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 1823 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 1824 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 1825 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[15~, 1826 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 1827 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 1828 kspd=^Z, nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\E[T, 1829 rin=\E[%p1%dT, ritm=\E[23m, rmacs=\E[10m, rmir=\E[4l, 1830 rmso=\E[27m, rmul=\E[24m, rs1=\EM\E[?1000l, sc=\E7, 1831 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 1832 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 1833 sgr0=\E[0m, sitm=\E[3m, smacs=\E[11m, smir=\E[4h, 1834 smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, grbom=\E[>1l, 1835 gsbom=\E[>1h, 1836 1837#### QNX 1838# 1839 1840# QNX 4.0 Console 1841# Michael's original version of this entry had <am@>, <smcup=\Ei>, 1842# <rmcup=\Eh\ER>; this was so terminfo applications could write the lower 1843# right corner without triggering a scroll. The ncurses terminfo library can 1844# handle this case with the <ich1> capability, and prefers <am> for better 1845# optimization. Bug: The <op> capability resets attributes. 1846# From: Michael Hunter <mphunter@qnx.com> 30 Jul 1996 1847# (removed: <sgr=%?%p1%t\E<%;%p2%t\E[%;%p3%t\E(%;%p4%t\E{%;%p6%t\E<%;,>) 1848qnx|qnx4|qnx console, 1849 daisy, km, mir, msgr, xhpa, xt, 1850 colors#8, cols#80, it#4, lines#25, ncv#3, pairs#8, 1851 acsc=O\333a\261j\331k\277l\332m\300n\305o\337q\304s\334t\303u\264v\301w\302x\263, 1852 bel=^G, blink=\E{, bold=\E<, civis=\Ey0, clear=\EH\EJ, 1853 cnorm=\Ey1, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 1854 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ey2, 1855 dch1=\Ef, dl1=\EF, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\Ee, 1856 il1=\EE, ind=^J, kBEG=\377\356, kCAN=\377\263, 1857 kCMD=\377\267, kCPY=\377\363, kCRT=\377\364, 1858 kDL=\377\366, kEND=\377\301, kEOL=\377\311, 1859 kEXT=\377\367, kFND=\377\370, kHLP=\377\371, 1860 kHOM=\377\260, kIC=\377\340, kLFT=\377\264, 1861 kMOV=\377\306, kMSG=\377\304, kNXT=\377\272, 1862 kOPT=\377\372, kPRT=\377\275, kPRV=\377\262, 1863 kRDO=\377\315, kRES=\377\374, kRIT=\377\266, 1864 kRPL=\377\373, kSAV=\377\307, kSPD=\377\303, 1865 kUND=\377\337, kbeg=\377\300, kcan=\377\243, kcbt=\377\0, 1866 kclo=\377\343, kclr=\377\341, kcmd=\377\245, 1867 kcpy=\377\265, kcrt=\377\305, kctab=\377\237, 1868 kcub1=\377\244, kcud1=\377\251, kcuf1=\377\246, 1869 kcuu1=\377\241, kdch1=\377\254, kdl1=\377\274, 1870 ked=\377\314, kel=\377\310, kend=\377\250, kent=\377\320, 1871 kext=\377\270, kf1=\377\201, kf10=\377\212, 1872 kf11=\377\256, kf12=\377\257, kf13=\377\213, 1873 kf14=\377\214, kf15=\377\215, kf16=\377\216, 1874 kf17=\377\217, kf18=\377\220, kf19=\377\221, 1875 kf2=\377\202, kf20=\377\222, kf21=\377\223, 1876 kf22=\377\224, kf23=\377\333, kf24=\377\334, 1877 kf25=\377\225, kf26=\377\226, kf27=\377\227, 1878 kf28=\377\230, kf29=\377\231, kf3=\377\203, 1879 kf30=\377\232, kf31=\377\233, kf32=\377\234, 1880 kf33=\377\235, kf34=\377\236, kf35=\377\276, 1881 kf36=\377\277, kf37=\377\321, kf38=\377\322, 1882 kf39=\377\323, kf4=\377\204, kf40=\377\324, 1883 kf41=\377\325, kf42=\377\326, kf43=\377\327, 1884 kf44=\377\330, kf45=\377\331, kf46=\377\332, 1885 kf47=\377\316, kf48=\377\317, kf5=\377\205, kf6=\377\206, 1886 kf7=\377\207, kf8=\377\210, kf9=\377\211, kfnd=\377\346, 1887 khlp=\377\350, khome=\377\240, khts=\377\342, 1888 kich1=\377\253, kil1=\377\273, kind=\377\261, 1889 kmov=\377\351, kmrk=\377\355, kmsg=\377\345, 1890 knp=\377\252, knxt=\377\312, kopn=\377\357, 1891 kopt=\377\353, kpp=\377\242, kprt=\377\255, 1892 kprv=\377\302, krdo=\377\336, kref=\377\354, 1893 kres=\377\360, krfr=\377\347, kri=\377\271, 1894 krmir=\377\313, krpl=\377\362, krst=\377\352, 1895 ksav=\377\361, kslt=\377\247, kspd=\377\335, 1896 ktbc=\377\344, kund=\377\365, mvpa=\E!%p1%02d, op=\ER, 1897 rep=\Eg%p2%{32}%+%c%p1%c, rev=\E(, ri=\EI, rmcup=\Eh\ER, 1898 rmso=\E), rmul=\E], rs1=\ER, setb=\E@%p1%Pb%gb%gf%d%d, 1899 setf=\E@%p1%Pf%gb%gf%d%d, sgr0=\E}\E]\E>\E), smcup=\Ei, 1900 smso=\E(, smul=\E[, 1901# 1902# 1903qnxt|qnxt4|QNX4 terminal, 1904 crxm, use=qnx4, 1905# 1906qnxm|QNX4 with mouse events, 1907 maddr#1, 1908 chr=\E/, cvr=\E", is1=\E/0t, mcub=\E/>1h, mcub1=\E/>7h, 1909 mcud=\E/>1h, mcud1=\E/>1l\E/>9h, mcuf=\E/>1h\E/>9l, 1910 mcuf1=\E/>7l, mcuu=\E/>6h, mcuu1=\E/>6l, rmicm=\E/>2l, 1911 smicm=\E/>2h, use=qnx4, 1912# 1913qnxw|QNX4 windows, 1914 xvpa, use=qnxm, 1915# 1916# Monochrome QNX4 terminal or console. Setting this terminal type will 1917# allow an application running on a color console to behave as if it 1918# were a monochrome terminal. Output will be through stdout instead of 1919# console writes because the term routines will recognize that the 1920# terminal name starts with 'qnxt'. 1921# 1922qnxtmono|Monochrome QNX4 terminal or console, 1923 colors@, pairs@, 1924 scp@, use=qnx4, 1925 1926# From: Federico Bianchi <bianchi@pc-arte2.arte.unipi.it>, 1 Jul 1998 1927# (esr: commented out <scp> and <rmcup> to avoid warnings.) 1928# (TD: derive from original qnx4 entry) 1929qnxt2|qnx 2.15 serial terminal, 1930 am, 1931 civis@, cnorm@, cvvis@, dch1@, ich1@, kRES@, kRPL@, kUND@, kspd@, 1932 rep@, rmcup@, rmso=\E>, setb@, setf@, smcup@, smso=\E<, use=qnx4, 1933 1934# QNX ANSI terminal definition 1935qansi-g|QNX ANSI, 1936 am, eslok, hs, xon, 1937 colors#8, cols#80, it#8, lines#25, ncv#19, pairs#64, wsl#80, 1938 acsc=Oa``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 1939 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 1940 clear=\E[2J\E[H, cnorm=\E[?25h\E[?12l, cr=^M, 1941 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 1942 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 1943 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, cuu1=\E[A, 1944 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 1945 dl=\E[%p1%dM, dl1=\E[1M, dsl=\E[r, ech=\E[%p1%dX, ed=\E[J, 1946 el=\E[K, el1=\E[1K\E[X, flash=\E[?5h$<200>\E[?5l, 1947 fsl=\E[?6h\E8, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 1948 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, 1949 ind=\E[S, indn=\E[%p1%dS, invis=\E[9m, 1950 is2=\E>\E[?1l\E[?7h\E[0;10;39;49m, is3=\E(B\E)0, 1951 kBEG=\ENn, kCAN=\E[s, kCMD=\E[t, kCPY=\ENs, kCRT=\ENt, 1952 kDL=\ENv, kEXT=\ENw, kFND=\ENx, kHLP=\ENy, kHOM=\E[h, 1953 kLFT=\E[d, kNXT=\E[u, kOPT=\ENz, kPRV=\E[v, kRIT=\E[c, 1954 kbs=^H, kcan=\E[S, kcbt=\E[Z, kclo=\ENc, kclr=\ENa, 1955 kcmd=\E[G, kcpy=\E[g, kctab=\E[z, kcub1=\E[D, kcud1=\E[B, 1956 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[p, kend=\E[Y, 1957 kext=\E[y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EOA, 1958 kf13=\EOp, kf14=\EOq, kf15=\EOr, kf16=\EOs, kf17=\EOt, 1959 kf18=\EOu, kf19=\EOv, kf2=\EOQ, kf20=\EOw, kf21=\EOx, 1960 kf22=\EOy, kf23=\EOz, kf24=\EOa, kf25=\E[1~, kf26=\E[2~, 1961 kf27=\E[3~, kf28=\E[4~, kf29=\E[5~, kf3=\EOR, kf30=\E[6~, 1962 kf31=\E[7~, kf32=\E[8~, kf33=\E[9~, kf34=\E[10~, 1963 kf35=\E[11~, kf36=\E[12~, kf37=\E[17~, kf38=\E[18~, 1964 kf39=\E[19~, kf4=\EOS, kf40=\E[20~, kf41=\E[21~, 1965 kf42=\E[22~, kf43=\E[23~, kf44=\E[24~, kf45=\E[25~, 1966 kf46=\E[26~, kf47=\E[27~, kf48=\E[28~, kf5=\EOT, kf6=\EOU, 1967 kf7=\EOV, kf8=\EOW, kf9=\EOX, kfnd=\ENf, khlp=\ENh, 1968 khome=\E[H, khts=\ENb, kich1=\E[@, kil1=\E[`, kind=\E[a, 1969 kmov=\ENi, kmrk=\ENm, kmsg=\ENe, knp=\E[U, kopn=\ENo, 1970 kopt=\ENk, kpp=\E[V, kref=\ENl, kres=\ENp, krfr=\ENg, 1971 kri=\E[b, krpl=\ENr, krst=\ENj, ksav=\ENq, kslt=\E[T, 1972 ktbc=\ENd, kund=\ENu, ll=\E[99H, nel=\EE, op=\E[39;49m, 1973 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\E[T, 1974 rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmso=\E[27m, 1975 rmul=\E[24m, rs1=\017\E[?7h\E[0;39;49m$<2>\E>\E[?1l, 1976 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 1977 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 1978 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 1979 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;9%;m%?%p9%t\016%e\017%;, 1980 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smso=\E[7m, 1981 smul=\E[4m, tbc=\E[3g, 1982 tsl=\E7\E1;24r\E[?6l\E[25;%i%p1%dH, 1983# 1984qansi|QNX ansi with console writes, 1985 daisy, xhpa, use=qansi-g, 1986# 1987qansi-t|QNX ansi without console writes, 1988 crxm, use=qansi, 1989# 1990qansi-m|QNX ansi with mouse, 1991 maddr#1, 1992 chr=\E[, cvr=\E], is1=\E[0t, mcub=\E[>1h, mcub1=\E[>7h, 1993 mcud=\E[>1h, mcud1=\E[>1l\E[>9h, mcuf=\E[>1h\E[>9l, 1994 mcuf1=\E[>7l, mcuu=\E[>6h, mcuu1=\E[>6l, rmicm=\E[>2l, 1995 smicm=\E[>2h, use=qansi, 1996# 1997qansi-w|QNX ansi for windows, 1998 xvpa, use=qansi-m, 1999 2000#### SCO consoles 2001 2002# SCO console and SOS-Syscons console for 386bsd 2003# (scoansi: had unknown capabilities 2004# :Gc=N:Gd=K:Gh=M:Gl=L:Gu=J:Gv=\072:\ 2005# :GC=E:GD=B:GH=D:GL=\64:GU=A:GV=\63:GR=C: 2006# :G1=?:G2=Z:G3=@:G4=Y:G5=;:G6=I:G7=H:G8=<:\ 2007# :CW=\E[M:NU=\E[N:RF=\E[O:RC=\E[P:\ 2008# :WL=\E[S:WR=\E[T:CL=\E[U:CR=\E[V:\ 2009# I renamed GS/GE/HM/EN/PU/PD/RT and added klone+sgr-dumb, based 2010# on the <smacs>=\E[12m -- esr) 2011# 2012# klone+sgr-dumb is an error since the acsc does not match -TD 2013# 2014# In this description based on SCO's keyboard(HW) manpage list of default 2015# function key values: 2016# F13-F24 are shifted F1-F12 2017# F25-F36 are control F1-F12 2018# F37-F48 are shift+control F1-F12 2019# 2020# hpa/vpa work in the console, but not in scoterm: 2021# hpa=\E[%p1%dG, 2022# vpa=\E[%p1%dd, 2023# 2024# SCO's terminfo uses 2025# kLFT=\E[d, 2026# kRIT=\E[c, 2027# which do not work (console or scoterm). 2028# 2029# Console documents only 3 attributes can be set with SGR (so we don't use sgr). 2030scoansi-old|SCO Extended ANSI standard crt (5.0.5), 2031 OTbs, am, bce, eo, xon, 2032 colors#8, cols#80, it#8, lines#25, pairs#64, 2033 acsc=+/\,.-\230.\2310[5566778899\:\:;;<<==>>FFGGHHIIJJKKLLMMNNOOPPQQRRSSTTUUVVWWXX`\204a0fxgqh2jYk?lZm@nEqDtCu4vAwBx3yszr{c}\034~\207, 2034 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 2035 civis=\E[=14;12C, clear=\E[H\E[2J, cnorm=\E[=10;12C, 2036 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 2037 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 2038 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[=0;12C, dch=\E[%p1%dP, 2039 dch1=\E[P, dispc=\E[=%p1%dg, dl=\E[%p1%dM, dl1=\E[M, 2040 ed=\E[m\E[J, el=\E[m\E[K, el1=\E[1K, home=\E[H, ht=^I, 2041 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 2042 ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbeg=\E[E, kbs=^H, 2043 kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2044 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 2045 kf12=\E[X, kf13=\E[Y, kf15=\E[a, kf16=\E[b, kf17=\E[c, 2046 kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, 2047 kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, 2048 kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, 2049 kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, 2050 kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, 2051 kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], 2052 kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, 2053 kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 2054 kich1=\E[L, knp=\E[G, kpp=\E[I, op=\E[0;37;40m, rc=\E8, 2055 rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, 2056 rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sc=\E7, 2057 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, 2058 smacs=\E[12m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, 2059scoansi-new|SCO Extended ANSI standard crt (5.0.6), 2060 km, 2061 civis=\E[=0c, cnorm=\E[=1c, csr=\E[%i%p1%d;%p2%dr, 2062 cvvis=\E[=2c, mgc=\E[=r, oc=\E[51m, op=\E[50m, 2063 rep=\E[%p1%d;%p2%db, rmm=\E[=11L, 2064 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%e;10%;m, 2065 smgb=\E[=1;0m, smgbp=\E[=1;%i%p1%dm, 2066 smglp=\E[=2;%i%p1%dm, smgr=\E[=3;0m, 2067 smgrp=\E[=3;%i%p1%dm, smgt=\E[=0;0m, 2068 smgtp=\E[=0;%i%p1%dm, smm=\E[=10L, 2069 wind=\E[%i%p1%d;%p2%d;%i%p3%d;%p4%dr, 2070 use=scoansi-old, 2071# make this easy to change... 2072scoansi|SCO Extended ANSI standard crt, 2073 use=scoansi-old, 2074 2075#### SGI consoles 2076 2077# Sent by Stefan Stapelberg <stefan@rent-a-guru.de>, 24 Feb 1997, this is 2078# from SGI's terminfo database. SGI's entry shows F9-F12 with the codes 2079# for the application keypad mode. We have added iris-ansi-ap rather than 2080# change the original to keypad mode. 2081# 2082# (iris-ansi: added rmam/smam based on init string -- esr) 2083# 2084# This entry, and those derived from it, is used in xwsh (also known as 2085# winterm). Some capabilities that do not fit into the terminfo model 2086# include the shift- and control-functionkeys: 2087# 2088# F1-F12 generate different codes when shift or control modifiers are used. 2089# For example: 2090# F1 \E[001q 2091# shift F1 \E[013q 2092# control-F1 \E[025q 2093# 2094# In application keypad mode, F9-F12 generate codes like vt100 PF1-PF4, i.e., 2095# \EOP to \EOS. The shifted and control modifiers still do the same thing. 2096# 2097# The cursor keys also have different codes: 2098# control-up \E[162q 2099# control-down \E[165q 2100# control-left \E[159q 2101# control-right \E[168q 2102# 2103# shift-up \E[161q 2104# shift-down \E[164q 2105# shift-left \E[158q 2106# shift-right \E[167q 2107# 2108# control-tab \[072q 2109# 2110iris-ansi|iris-ansi-net|IRIS emulating 40 line ANSI terminal (almost VT100), 2111 am, 2112 cols#80, it#8, lines#40, 2113 bel=^G, bold=\E[1m, clear=\E[H\E[2J, 2114 cnorm=\E[9/y\E[12/y\E[=6l, cr=^M, cub=\E[%p1%dD, 2115 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 2116 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 2117 cuu1=\E[A, cvvis=\E[10/y\E[=1h\E[=2l\E[=6h, 2118 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 2119 home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=\ED, 2120 is2=\E[?1l\E>\E[?7h\E[100g\E[0m\E7\E[r\E8, kDC=\E[P, 2121 kEND=\E[147q, kHOM=\E[143q, kLFT=\E[158q, kPRT=\E[210q, 2122 kRIT=\E[167q, kSPD=\E[218q, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 2123 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, 2124 kend=\E[146q, kent=^M, kf1=\E[001q, kf10=\E[010q, 2125 kf11=\E[011q, kf12=\E[012q, kf2=\E[002q, kf3=\E[003q, 2126 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 2127 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, 2128 knp=\E[154q, kpp=\E[150q, kprt=\E[209q, krmir=\E[146q, 2129 kspd=\E[217q, nel=\EE, pfkey=\EP101;%p1%d.y%p2%s\E\\, 2130 rc=\E8, rev=\E[7m, ri=\EM, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 2131 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[1;7m, smul=\E[4m, 2132 tbc=\E[3g, 2133iris-ansi-ap|IRIS ANSI in application-keypad mode, 2134 is2=\E[?1l\E=\E[?7h, kent=\EOM, kf10=\E[010q, 2135 kf11=\E[011q, kf12=\E[012q, kf9=\E[009q, use=iris-ansi, 2136 2137# From the man-page, this is a quasi-vt100 emulator that runs on SGI's IRIX 2138# (T.Dickey 98/1/24) 2139iris-color|xwsh|IRIX ANSI with color, 2140 ncv#33, 2141 csr=\E[%i%p1%d;%p2%dr, dch=\E[%p1%dP, dim=\E[2m, 2142 ech=\E[%p1%dX, ich=\E[%p1%d@, rc=\E8, ritm=\E[23m, 2143 rmul=\E[24m, rs1=\Ec, 2144 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2145 sitm=\E[3m, use=vt100+enq, use=klone+color, 2146 use=iris-ansi-ap, 2147 2148#### OpenBSD consoles 2149# 2150# From: Alexei Malinin <Alexei.Malinin@mail.ru>; October, 2011. 2151# 2152# The following terminal descriptions for the AMD/Intel PC console 2153# were prepared based on information contained in the OpenBSD-4.9 2154# termtypes.master and wscons(4) & vga(4) manuals (2010, November). 2155# 2156# Added bce based on testing with tack -TD 2157# Added several capabilities to pccon+base, reading wsemul_vt100_subr.c -TD 2158# Changed kbs to DEL and removed keys that duplicate stty settings -TD 2159# 2160pccon+keys|OpenBSD PC keyboard keys, 2161 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2162 kdch1=\E[3~, kend=\E[8~, kent=^M, kf1=\E[11~, kf10=\E[21~, 2163 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, 2164 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 2165 kf9=\E[20~, khome=\E[7~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 2166 krfr=^R, 2167pccon+sgr+acs0|sgr and simple ASCII pseudographics for OpenBSD PC console, 2168 acsc=+>\,<-\^.v0#`+a\:f\\h#i#j+k+l+m+n+o~p-q-r-s_t+u+v+w+x|y#z#{*|!}#~o, 2169 sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, 2170pccon+sgr+acs|sgr and default ASCII pseudographics for OpenBSD PC console, 2171 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2172 enacs=\E)0$<5>, rmacs=\E(B$<5>, 2173 sgr=\E[0%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<5>, 2174 sgr0=\E[m\E(B$<5>, smacs=\E(0$<5>, 2175pccon+colors|ANSI colors for OpenBSD PC console, 2176 bce, 2177 colors#8, pairs#64, 2178 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 2179pccon+base|base capabilities for OpenBSD PC console, 2180 am, km, mc5i, msgr, npc, nxon, xenl, xon, 2181 cols#80, it#8, lines#24, 2182 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 2183 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 2184 dch1=\E[P, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 2185 el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 2186 il1=\E[L, ind=\ED, nel=\EE, rev=\E[7m, ri=\EM, rmam=\E[?7l, 2187 rmso=\E[m, rs2=\Ec$<50>, smam=\E[?7h, smso=\E[7m, 2188 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, 2189pccon0-m|OpenBSD PC console without colors & with simple ASCII pseudographics, 2190 use=pccon+base, use=pccon+sgr+acs0, use=pccon+keys, 2191pccon0|OpenBSD PC console with simple ASCII pseudographics, 2192 use=pccon0-m, use=pccon+colors, 2193pccon-m|OpenBSD PC console without colors, 2194 use=pccon+base, use=pccon+sgr+acs, use=pccon+keys, 2195pccon|OpenBSD PC console, 2196 use=pccon-m, use=pccon+colors, 2197 2198#### NetBSD consoles 2199# 2200# pcvt termcap database entries (corresponding to release 3.31) 2201# Author's last edit-date: [Fri Sep 15 20:29:10 1995] 2202# 2203# (For the terminfo master file, I translated these into terminfo syntax. 2204# Then I dropped all the pseudo-HP entries. we don't want and can't use 2205# the :Xs: flag. Then I split :is: into a size-independent <is1> and a 2206# size-dependent <is2>. Finally, I added <rmam>/<smam> -- esr) 2207 2208# NOTE: <ich1> has been taken out of this entry. for reference, it should 2209# be <ich1=\E[@>. For discussion, see ICH/ICH1 VERSUS RMIR/SMIR below. 2210# (esr: added <civis> and <cnorm> to resolve NetBSD Problem Report #4583) 2211pcvtXX|pcvt vt200 emulator (DEC VT220), 2212 am, km, mir, msgr, xenl, 2213 it#8, vt#3, 2214 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz~~, 2215 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 2216 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 2217 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2218 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 2219 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2220 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 2221 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 2222 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, 2223 is1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=\177, 2224 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 2225 kdch1=\E[3~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 2226 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 2227 khome=\E[1~, kich1=\E[2~, kll=\E[4~, knp=\E[6~, kpp=\E[5~, 2228 nel=\EE, rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, 2229 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmir=\E[4l, 2230 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 2231 rs1=\Ec\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2232 sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 2233 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 2234 2235# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) 2236# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and 2237# 50 lines entries; 80 columns 2238pcvt25|dec vt220 emulation with 25 lines, 2239 cols#80, lines#25, 2240 is2=\E[1;25r\E[25;1H, use=pcvtXX, 2241pcvt28|dec vt220 emulation with 28 lines, 2242 cols#80, lines#28, 2243 is2=\E[1;28r\E[28;1H, use=pcvtXX, 2244pcvt35|dec vt220 emulation with 35 lines, 2245 cols#80, lines#35, 2246 is2=\E[1;35r\E[35;1H, use=pcvtXX, 2247pcvt40|dec vt220 emulation with 40 lines, 2248 cols#80, lines#40, 2249 is2=\E[1;40r\E[40;1H, use=pcvtXX, 2250pcvt43|dec vt220 emulation with 43 lines, 2251 cols#80, lines#43, 2252 is2=\E[1;43r\E[43;1H, use=pcvtXX, 2253pcvt50|dec vt220 emulation with 50 lines, 2254 cols#80, lines#50, 2255 is2=\E[1;50r\E[50;1H, use=pcvtXX, 2256 2257# NetBSD/FreeBSD vt220 terminal emulator console (pc keyboard & monitor) 2258# termcap entries for pure VT220-Emulation and 25, 28, 35, 40, 43 and 2259# 50 lines entries; 132 columns 2260pcvt25w|dec vt220 emulation with 25 lines and 132 cols, 2261 cols#132, lines#25, 2262 is2=\E[1;25r\E[25;1H, use=pcvtXX, 2263pcvt28w|dec vt220 emulation with 28 lines and 132 cols, 2264 cols#132, lines#28, 2265 is2=\E[1;28r\E[28;1H, use=pcvtXX, 2266pcvt35w|dec vt220 emulation with 35 lines and 132 cols, 2267 cols#132, lines#35, 2268 is2=\E[1;35r\E[35;1H, use=pcvtXX, 2269pcvt40w|dec vt220 emulation with 40 lines and 132 cols, 2270 cols#132, lines#40, 2271 is2=\E[1;40r\E[40;1H, use=pcvtXX, 2272pcvt43w|dec vt220 emulation with 43 lines and 132 cols, 2273 cols#132, lines#43, 2274 is2=\E[1;43r\E[43;1H, use=pcvtXX, 2275pcvt50w|dec vt220 emulation with 50 lines and 132 cols, 2276 cols#132, lines#50, 2277 is2=\E[1;50r\E[50;1H, use=pcvtXX, 2278 2279# OpenBSD implements a color variation 2280pcvt25-color|dec vt220 emulation with 25 lines and color, 2281 cols#80, lines#25, 2282 is2=\E[1;25r\E[25;1H, kf1=\EOP, kf10=\E[29~, kf11=\E[23~, 2283 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 2284 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 2285 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 2286 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, use=pcvtXX, 2287 use=ecma+color, 2288 2289# Terminfo entries to enable the use of the ncurses library in colour on a 2290# NetBSD-arm32 console (only tested on a RiscPC). 2291# Created by Dave Millen <dmill@globalnet.co.uk> 22.07.98 2292# modified codes for setf/setb to setaf/setab, then to klone+color, corrected 2293# typo in invis - TD 2294arm100|arm100-am|Arm(RiscPC) ncurses compatible (for 640x480), 2295 am, bce, msgr, xenl, xon, 2296 cols#80, it#8, lines#30, 2297 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2298 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2299 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2300 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 2301 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 2302 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 2303 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 2304 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, 2305 invis=\E[8m$<2>, ka1=\E[q, ka3=\E[s, kb2=\E[r, kbs=^H, 2306 kc1=\E[p, kc3=\E[n, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 2307 kcuu1=\E[A, kent=\E[M, kf0=\E[y, kf1=\E[P, kf10=\E[x, 2308 kf2=\E[Q, kf3=\E[R, kf4=\E[S, kf5=\E[t, kf6=\E[u, kf7=\E[v, 2309 kf8=\E[l, kf9=\E[w, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, 2310 rmacs=^O, rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 2311 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 2312 sc=\E7, 2313 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<2>, 2314 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 2315 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, use=ecma+sgr, 2316 use=klone+color, 2317 2318arm100-w|arm100-wam|Arm(RiscPC) ncurses compatible (for 1024x768), 2319 cols#132, lines#50, use=arm100, 2320 2321# NetBSD/x68k console vt200 emulator. This port runs on a 68K machine 2322# manufactured by Sharp for the Japenese market. 2323# From Minoura Makoto <minoura@netlaputa.or.jp>, 12 May 1996 2324x68k|x68k-ite|NetBSD/x68k ITE, 2325 cols#96, lines#32, 2326 kclr=\E[9~, khlp=\E[28~, use=vt220, 2327 2328# <tv@pobox.com>: 2329# Entry for the DNARD OpenFirmware console, close to ANSI but not quite. 2330# 2331# (still unfinished, but good enough so far.) 2332ofcons|DNARD OpenFirmware console, 2333 bw, 2334 cols#80, lines#30, 2335 bel=^G, blink=\2335m, bold=\2331m, clear=^L, cr=^M, 2336 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, 2337 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 2338 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, 2339 dim=\2332m, dl=\233%p1%dM, dl1=\233M, ed=\233J, el=\233K, 2340 flash=^G, ht=^I, ich=\233%p1%d@, ich1=\233@, il=\233%p1%dL, 2341 il1=\233L, ind=^J, invis=\2338m, kbs=^H, kcub1=\233D, 2342 kcud1=\233B, kcuf1=\233C, kcuu1=\233A, kdch1=\233P, 2343 kf1=\2330P, kf10=\2330M, kf2=\2330Q, kf3=\2330W, 2344 kf4=\2330x, kf5=\2330t, kf6=\2330u, kf7=\2330q, kf8=\2330r, 2345 kf9=\2330p, knp=\233/, kpp=\233?, nel=^M^J, rev=\2337m, 2346 rmso=\2330m, rmul=\2330m, 2347 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t2%;%?%p7%t8%;%?%p1%p3%|%t;7%;m, 2348 sgr0=\2330m, smso=\2337m, smul=\2334m, 2349 2350# NetBSD "wscons" emulator in vt220 mode. 2351# This entry is based on the NetBSD termcap entry, correcting the ncv value. 2352# The emulator renders underlined text in red. Colors are otherwise usable. 2353# 2354# Testing the emulator and reading the source code (NetBSD 2.0), it appears 2355# that "vt220" is inaccurate. There are a few vt220-features, but most of the 2356# vt220 screens in vttest do not work with this emulator. For instance, it 2357# identifies itself (primary DA response) as a vt220 with selective erase. But 2358# the selective erase feature does not work. The secondary response is copied 2359# from Kermit's emulation of vt220, does not correspond to actual vt220. At 2360# the level of detail in a termcap, it is a passable emulator, since ECH does 2361# work. Don't use it on a VMS system -TD 2362wsvt25|NetBSD wscons in 25 line DEC VT220 mode, 2363 bce, msgr, 2364 colors#8, cols#80, it#8, lines#25, ncv#2, pairs#64, 2365 civis=\E[?25l, cnorm=\E[?25h, is2=\E[r\E[25;1H, 2366 kdch1=\E[3~, kend=\E[8~, kf1=\E[11~, kf10=\E[21~, 2367 kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, kf3=\E[13~, 2368 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 2369 kf9=\E[20~, khome=\E[7~, op=\E[m, rs1=\Ec, 2370 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=vt220, 2371 2372wsvt25m|NetBSD wscons in 25 line DEC VT220 mode with Meta, 2373 km, use=wsvt25, 2374 2375# NetBSD 6.x still uses wscons, with minor changes (2014/02/22) -TD 2376# 2377# TERM is by default vt100 for the console, wsvt25 for other ttys. 2378# Initial testing set TERM=xterm, based on comments by developers, found too 2379# many differences to continue in that path. However, test-results may be 2380# useful to people curious about compatibility with xterm. 2381# 2382# Testing with tack: 2383# ----------------- 2384# Failed: cbt, bel, flash, cvvis, smul (color), blink, invis 2385# There is color-bleeding in the color-pairs screen. 2386# Attributes do not work with color 2387# Failed: vpa/hpa 2388# Failed: kf1-kf4, kf13-kf48, khome, kend 2389# (effectively xterm-r6 for function-keys) 2390# None of the function or cursor key-modifiers are encoded. 2391# Console hangs in the smm/rmm test if TERM=xterm, does not show test 2392# 2393# Testing with vttest: 2394# ------------------- 2395# Identifies as vt220 with selective erase 2396# (however, selective erase refers to DECSCA, SPA) 2397# Does not implement vt52 2398# Uses spaces to simulate double-size characters 2399# Does not support 8-bit controls 2400# Does not support VT220 reports 2401# Does not support send/receive mode 2402# Supports ECH (like rxvt) 2403# Does not support DECSCA 2404# Does not support any of the ISO-6429 cursor-movement 2405# Does not support any of the ISO-6429 miscellaneous tests 2406# (SL/SR also leave unexpected char on screen too) 2407# Background does not change in menu 11.6.9 (SGR 22-27) 2408# None of the xterm special features tests work 2409netbsd6|NetBSD wscons in 25 line DEC VT100 mode, 2410 kbs=\177, use=wsvt25, 2411 2412# `rasterconsole' provided by 4.4BSD, NetBSD and OpenBSD on SPARC, and 2413# DECstation/pmax. 2414rcons|BSD rasterconsole, 2415 use=sun-il, 2416# Color version of above. Color currently only provided by NetBSD. 2417rcons-color|BSD rasterconsole with ANSI color, 2418 bce, 2419 colors#8, pairs#64, 2420 op=\E[m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=rcons, 2421 2422# mgterm -- MGL/MGL2, MobileGear Graphic Library 2423# for PocketBSD,PocketLinux,NetBSD/{hpcmips,mac68k} 2424# -- the setf/setb are probably incorrect, more likely setaf/setab -TD 2425# -- compare with cons25w 2426mgterm, 2427 OTbs, OTpt, am, bce, bw, eo, km, msgr, npc, 2428 colors#8, cols#80, it#8, lines#18, pairs#64, 2429 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 2430 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 2431 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 2432 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2433 dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, dl=\E[%p1%dM, 2434 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 2435 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 2436 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 2437 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 2438 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, 2439 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf2=\E[N, 2440 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 2441 kf9=\E[U, khome=\E[H, kich1=\E[L, knp=\E[G, kpp=\E[I, 2442 nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 2443 rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, setb=\E[4%p1%dm, 2444 setf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 2445 2446#### FreeBSD console entries 2447# 2448# From: Andrey Chernov <ache@astral.msk.su> 29 Mar 1996 2449# Andrey Chernov maintains the FreeBSD termcap distributions. 2450# 2451# Note: Users of FreeBSD 2.1.0 and older versions must either upgrade 2452# or comment out the :cb: capability in the console entry. 2453# 2454# Alexander Lukyanov reports: 2455# I have seen FreeBSD-2.1.5R... The old el1 bug changed, but it is still there. 2456# Now el1 clears not only to the line beginning, but also a large chunk 2457# of previous line. But there is another bug - ech does not work at all. 2458# 2459 2460# for syscons 2461# common entry without semigraphics 2462# Bug: The <op> capability resets attributes. 2463# Bug? The ech and el1 attributes appear to move the cursor in some cases; for 2464# instance el1 does if the cursor is moved to the right margin first. Removed 2465# by T.Dickey 97/5/3 (ech=\E[%p1%dX, el1=\E[1K) 2466# 2467# Setting colors turns off reverse; we cannot guarantee order, so use ncv. 2468# Note that this disables standout with color. 2469# 2470# The emulator sends difference strings based on shift- and control-keys, 2471# like scoansi: 2472# F13-F24 are shifted F1-F12 2473# F25-F36 are control F1-F12 2474# F37-F48 are shift+control F1-F12 2475cons25w|ansiw|ansi80x25-raw|freebsd console (25-line raw mode), 2476 am, bce, bw, eo, msgr, npc, 2477 colors#8, cols#80, it#8, lines#25, ncv#21, pairs#64, 2478 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 2479 cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 2480 cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 2481 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2482 cvvis=\E[=1C, dch=\E[%p1%dP, dch1=\E[P, dim=\E[30;1m, 2483 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 2484 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich=\E[%p1%d@, 2485 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 2486 indn=\E[%p1%dS, kb2=\E[E, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 2487 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[F, 2488 kf1=\E[M, kf10=\E[V, kf11=\E[W, kf12=\E[X, kf13=\E[Y, 2489 kf14=\E[Z, kf15=\E[a, kf16=\E[b, kf17=\E[c, kf18=\E[d, 2490 kf19=\E[e, kf2=\E[N, kf20=\E[f, kf21=\E[g, kf22=\E[h, 2491 kf23=\E[i, kf24=\E[j, kf25=\E[k, kf26=\E[l, kf27=\E[m, 2492 kf28=\E[n, kf29=\E[o, kf3=\E[O, kf30=\E[p, kf31=\E[q, 2493 kf32=\E[r, kf33=\E[s, kf34=\E[t, kf35=\E[u, kf36=\E[v, 2494 kf37=\E[w, kf38=\E[x, kf39=\E[y, kf4=\E[P, kf40=\E[z, 2495 kf41=\E[@, kf42=\E[[, kf43=\E[\\, kf44=\E[], kf45=\E[\^, 2496 kf46=\E[_, kf47=\E[`, kf48=\E[{, kf5=\E[Q, kf6=\E[R, 2497 kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, kich1=\E[L, 2498 knp=\E[G, kpp=\E[I, nel=\E[E, op=\E[x, rc=\E8, rev=\E[7m, 2499 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, rs2=\E[x\E[m\Ec, sc=\E7, 2500 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 2501 sgr=\E[0%?%p1%t;2;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, 2502 sgr0=\E[m, smso=\E[7m, vpa=\E[%i%p1%dd, 2503cons25|ansis|ansi80x25|freebsd console (25-line ansi mode), 2504 acsc=-\030.^Y0\333`\004a\260f\370g\361h\261i\025j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, 2505 use=cons25w, 2506cons25-debian|freebsd console with debian backspace (25-line ansi mode), 2507 kbs=\177, kdch1=\E[3~, use=cons25, 2508cons25-m|ansis-mono|ansi80x25-mono|freebsd console (25-line mono ansi mode), 2509 colors@, pairs@, 2510 bold@, dim@, op@, rmul=\E[m, setab@, setaf@, 2511 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, 2512 smul=\E[4m, use=cons25, 2513cons30|ansi80x30|freebsd console (30-line ansi mode), 2514 lines#30, use=cons25, 2515cons30-m|ansi80x30-mono|freebsd console (30-line mono ansi mode), 2516 lines#30, use=cons25-m, 2517cons43|ansi80x43|freebsd console (43-line ansi mode), 2518 lines#43, use=cons25, 2519cons43-m|ansi80x43-mono|freebsd console (43-line mono ansi mode), 2520 lines#43, use=cons25-m, 2521cons50|ansil|ansi80x50|freebsd console (50-line ansi mode), 2522 lines#50, use=cons25, 2523cons50-m|ansil-mono|ansi80x50-mono|freebsd console (50-line mono ansi mode), 2524 lines#50, use=cons25-m, 2525cons60|ansi80x60|freebsd console (60-line ansi mode), 2526 lines#60, use=cons25, 2527cons60-m|ansi80x60-mono|freebsd console (60-line mono ansi mode), 2528 lines#60, use=cons25-m, 2529cons25r|pc3r|ibmpc3r|cons25-koi8-r|freebsd console w/koi8-r cyrillic, 2530 acsc=-\030.^Y0\215`\004a\220f\234h\221i\025j\205k\203l\202m\204n\212q\0t\206u\207v\211w\210x\201y\230z\231~\225, 2531 use=cons25w, 2532cons25r-m|pc3r-m|ibmpc3r-mono|cons25-koi8r-m|freebsd console w/koi8-r cyrillic (mono), 2533 colors@, pairs@, 2534 op@, rmul=\E[m, setab@, setaf@, 2535 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;30;1%;%?%p6%t;1%;m, 2536 smul=\E[4m, use=cons25r, 2537cons50r|cons50-koi8r|freebsd console w/koi8-r cyrillic (50 lines), 2538 lines#50, use=cons25r, 2539cons50r-m|cons50-koi8r-m|freebsd console w/koi8-r cyrillic (50-line mono), 2540 lines#50, use=cons25r-m, 2541cons60r|cons60-koi8r|freebsd console w/koi8-r cyrillic (60 lines), 2542 lines#60, use=cons25r, 2543cons60r-m|cons60-koi8r-m|freebsd console w/koi8-r cyrillic (60-line mono), 2544 lines#60, use=cons25r-m, 2545# ISO 8859-1 FreeBSD console 2546cons25l1|cons25-iso8859|freebsd console w/iso 8859-1 chars, 2547 acsc=+\253\,\273-\030.\031`\201a\202f\207g\210i\247j\213k\214l\215m\216n\217o\220p\221q\222r\223s\224t\225u\226v\227w\230x\231y\232z\233~\237, 2548 use=cons25w, 2549cons25l1-m|cons25-iso-m|freebsd console w/iso 8859-1 chars (mono), 2550 colors@, pairs@, 2551 bold@, dim@, op@, rmul=\E[m, setab@, setaf@, 2552 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m, 2553 smul=\E[4m, use=cons25l1, 2554cons50l1|cons50-iso8859|freebsd console w/iso 8859-1 chars (50 lines), 2555 lines#50, use=cons25l1, 2556cons50l1-m|cons50-iso-m|freebsd console w/iso 8859-1 chars (50-line mono), 2557 lines#50, use=cons25l1-m, 2558cons60l1|cons60-iso|freebsd console w/iso 8859-1 chars (60 lines), 2559 lines#60, use=cons25l1, 2560cons60l1-m|cons60-iso-m|freebsd console w/iso 8859-1 chars (60-line mono), 2561 lines#60, use=cons25l1-m, 2562 2563# Starting with FreeBSD 8, an alternative configuration for syscons is provided, 2564# which is intended to be xterm-compatible. See for example 2565# http://svnweb.freebsd.org/base/stable/8/sys/dev/syscons/ 2566# in particular scterm-teken.c 2567# 2568# For FreeBSD 9 and 10: 2569# -------------------- 2570# The /etc/ttys entries for console and other ttys are all configured to set 2571# TERM=xterm. 2572# 2573# Testing with tack: 2574# There is no VT100 line-drawing (uses +'s and -'s) 2575# Shifted f1-f12 give cons25 codes, rather than xterm function-keys 2576# 2577# Testing with vttest: 2578# Menu 2 diamonds don't work, blink ditto, light background ditto 2579# The terminal identifies itself as VT100 with AVO 2580# There is no VT52 support 2581# There is no doublesize character support 2582# The terminal supports ECH (like rxvt) 2583# The terminal does not support send/receive mode 2584# The terminal supports all of the ISO-6429 cursor-movement 2585# The terminal supports some of the ISO-6429 miscellaneous tests 2586# (SL/SR also leave unexpected char on screen too) 2587# 2588# Considering cons25 as a base, the line-drawing mostly works, but is missing 2589# the cells which happen to have ASCII control-character values: 2590# - ^X arrow pointing up 2591# . ^Y arrow pointing down 2592# i ^Y lantern 2593# ` ^D diamond 2594# 2595# Those are removed from this entry's acsc string to avoid confusion. 2596# The resulting description provides correct line-drawing and function-keys -TD 2597teken|syscons with teken, 2598 bw@, mir, xenl, 2599 acsc=0\333a\260f\370g\361h\261j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263y\363z\362~\371, 2600 civis=\E[?25l, cnorm=\E[?25h, cvvis@, hpa=\E[%i%p1%dG, 2601 hts=\EH, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 2602 kdch1=\E[3~, kend=\E[F, kent=^M, kf1=\EOP, kf10=\E[21~, 2603 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 2604 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 2605 khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmir=\E[4l, 2606 smir=\E[4h, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, 2607 u8=\E[?1;2c, u9=\E[c, vpa=\E[%i%p1%dd, use=cons25, 2608 2609#### 386BSD and BSD/OS Consoles 2610# 2611 2612# This was the original 386BSD console entry (I think). 2613# Some places it's named oldpc3|oldibmpc3. 2614# From: Alex R.N. Wetmore <aw2t@andrew.cmu.edu> 2615origpc3|origibmpc3|IBM PC 386BSD Console, 2616 OTbs, am, bw, eo, xon, 2617 cols#80, lines#25, 2618 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 2619 bold=\E[7m, clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 2620 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 2621 home=\E[H, ind=\E[S, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 2622 kcuu1=\E[A, khome=\E[Y, ri=\E[T, rmso=\E[1;0x\E[2;7x, 2623 rmul=\E[1;0x\E[2;7x, sgr0=\E[m\E[1;0x\E[2;7x, 2624 smso=\E[1;7x\E[2;0x, smul=\E[1;7x\E[2;0x, 2625 2626# description of BSD/386 console emulator in version 1.0 (supplied by BSDI) 2627oldpc3|oldibmpc3|old IBM PC BSD/386 Console, 2628 OTbs, km, 2629 lines#25, 2630 bel=^G, bold=\E[=15F, cr=^M, cud1=^J, dim=\E[=8F, dl1=\E[M, 2631 ht=^I, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 2632 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, kll=\E[F, 2633 knp=\E[G, kpp=\E[I, nel=^M^J, sgr0=\E[=R, 2634 2635# Description of BSD/OS console emulator in version 1.1, 2.0, 2.1 2636# Note, the emulator supports many of the additional console features 2637# listed in the iBCS2 (e.g. character-set selection) though not all 2638# are described here. This entry really ought to be upgraded. 2639# Also note, the console will also work with fewer lines after doing 2640# "stty rows NN", e.g. to use 24 lines. 2641# (Color support from Kevin Rosenberg <kevin@cyberport.com>, 2 May 1996) 2642# Bug: The <op> capability resets attributes. 2643bsdos-pc|IBM PC BSD/OS Console, 2644 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;1%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 2645 use=bsdos-pc-nobold, 2646 2647bsdos-pc-nobold|BSD/OS PC console w/o bold, 2648 use=klone+color, use=bsdos-pc-m, 2649 2650bsdos-pc-m|bsdos-pc-mono|BSD/OS PC console mono, 2651 OTbs, am, eo, km, xon, 2652 cols#80, it#8, lines#25, 2653 bel=^G, clear=\Ec, cr=^M, cub=\E[%p1%dD, cub1=^H, 2654 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 2655 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 2656 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 2657 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\E[D, 2658 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kich1=\E[L, 2659 kll=\E[F, knp=\E[G, kpp=\E[I, nel=^M^J, rc=\E8, sc=\E7, 2660 sgr=\E[0;10%?%p1%t;7%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m%?%p5%t\E[=8F%;, 2661 use=klone+sgr8, 2662 2663# Old names for BSD/OS PC console used in releases before 4.1. 2664pc3|BSD/OS on the PC Console, 2665 use=bsdos-pc-nobold, 2666ibmpc3|pc3-bold|BSD/OS on the PC Console with bold instead of underline, 2667 use=bsdos-pc, 2668 2669# BSD/OS on the SPARC 2670bsdos-sparc|Sun SPARC BSD/OS Console, 2671 use=sun, 2672 2673# BSD/OS on the PowerPC 2674bsdos-ppc|PowerPC BSD/OS Console, 2675 use=bsdos-pc, 2676 2677 2678#### DEC VT52 2679# (<acsc>/<rmacs>/<smacs> capabilities aren't in DEC's official entry -- esr) 2680# 2681# Actually (TD pointed this out at the time the acsc string was added): 2682# vt52 shouldn't define full acsc since most of the cells don't match. 2683# see vt100 manual page A-31. This is the list that does match: 2684# f degree 2685# g plus/minus 2686# h right-arrow 2687# k down-arrow 2688# m scan-1 2689# o scan-3 2690# q scan-5 2691# s scan-7 2692# The line-drawing happens to work in several terminal emulators, but should 2693# not be used as a guide to the capabilities of the vt52. Note in particular 2694# that vt52 does not support line-drawing characters (the scan-X values refer 2695# to a crude plotting feature) -TD 2696vt52|dec vt52, 2697 OTbs, 2698 cols#80, it#8, lines#24, 2699 acsc=+h.k0affggolpnqprrss, bel=^G, clear=\EH\EJ, cr=^M, 2700 cub1=\ED, cud1=\EB, cuf1=\EC, 2701 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 2702 el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 2703 kcuf1=\EC, kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 2704 2705#### DEC VT100 and compatibles 2706# 2707# DEC terminals from the vt100 forward are collected here. Older DEC terminals 2708# and micro consoles can be found in the `obsolete' section. More details on 2709# the relationship between the VT100 and ANSI X3.64/ISO 6429/ECMA-48 may be 2710# found near the end of this file. 2711# 2712# Except where noted, these entries are DEC's official terminfos. 2713# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support 2714# Engineering for more information. Updated terminfos and termcaps 2715# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. 2716# 2717# In October 1995 DEC sold its terminals business, including the VT and Dorio 2718# line and trademark, to SunRiver Data Systems. SunRiver has since changed 2719# its name to Boundless Technologies; see http://www.boundless.com. 2720# 2721 2722# NOTE: Any VT100 emulation, whether in hardware or software, almost 2723# certainly includes what DEC called the `Level 1 editing extension' codes; 2724# only the very oldest VT100s lacked these and there probably aren't any of 2725# those left alive. To capture these, use one of the VT102 entries. 2726# 2727# Note that the <xenl> glitch in vt100 is not quite the same as on the Concept, 2728# since the cursor is left in a different position while in the 2729# weird state (concept at beginning of next line, vt100 at end 2730# of this line) so all versions of vi before 3.7 don't handle 2731# <xenl> right on vt100. The correct way to handle <xenl> is when 2732# you output the char in column 80, immediately output CR LF 2733# and then assume you are in column 1 of the next line. If <xenl> 2734# is on, am should be on too. 2735# 2736# I assume you have smooth scroll off or are at a slow enough baud 2737# rate that it doesn't matter (1200? or less). Also this assumes 2738# that you set auto-nl to "on", if you set it off use vt100-nam 2739# below. 2740# 2741# The padding requirements listed here are guesses. It is strongly 2742# recommended that xon/xoff be enabled, as this is assumed here. 2743# 2744# The vt100 uses <rs2> and <rf> rather than <is2>/<tbc>/<hts> because the 2745# tab settings are in non-volatile memory and don't need to be 2746# reset upon login. Also setting the number of columns glitches 2747# the screen annoyingly. You can type "reset" to get them set. 2748# 2749# The VT100 series terminals have cursor ("arrows") keys which can operate 2750# in two different modes: Cursor Mode and Application Mode. Cursor Mode 2751# is the reset state, and is assumed to be the normal state. Application 2752# Mode is the "set" state. In Cursor Mode, the cursor keys transmit 2753# "Esc [ {code}" sequences, conforming to ANSI standards. In Application 2754# Mode, the cursor keys transmit "Esc O <code>" sequences. Application Mode 2755# was provided primarily as an aid to the porting of VT52 applications. It is 2756# assumed that the cursor keys are normally in Cursor Mode, and expected that 2757# applications such as vi will always transmit the <smkx> string. Therefore, 2758# the definitions for the cursor keys are made to match what the terminal 2759# transmits after the <smkx> string is transmitted. If the <smkx> string 2760# is a null string or is not defined, then cursor keys are assumed to be in 2761# "Cursor Mode", and the cursor keys definitions should match that assumption, 2762# else the application may fail. It is also expected that applications will 2763# always transmit the <rmkx> string to the terminal before they exit. 2764# 2765# The VT100 series terminals have an auxiliary keypad, commonly referred to as 2766# the "Numeric Keypad", because it is a cluster of numeric and function keys. 2767# The Numeric Keypad which can operate in two different modes: Numeric Mode and 2768# Application Mode. Numeric Mode is the reset state, and is assumed to be 2769# the normal state. Application Mode is the "set" state. In Numeric Mode, 2770# the numeric and punctuation keys transmit ASCII 7-bit characters, and the 2771# Enter key transmits the same as the Return key (Note: the Return key 2772# can be configured to send either LF (\015) or CR LF). In Application Mode, 2773# all the keypad keys transmit "Esc O {code}" sequences. The PF1 - PF4 keys 2774# always send the same "Esc O {code}" sequences. It is assumed that the keypad 2775# is normally in Numeric Mode. If an application requires that the keypad be 2776# in Application Mode then it is expected that the user, or the application, 2777# will set the TERM environment variable to point to a terminfo entry which has 2778# defined the <smkx> string to include the codes that switch the keypad into 2779# Application Mode, and the terminfo entry will also define function key 2780# fields to match the Application Mode control codes. If the <smkx> string 2781# is a null string or is not defined, then the keypad is assumed to be in 2782# Numeric Mode. If the <smkx> string switches the keypad into Application 2783# Mode, it is expected that the <rmkx> string will contain the control codes 2784# necessary to reset the keypad to "Normal" mode, and it is also expected that 2785# applications which transmit the <smkx> string will also always transmit the 2786# <rmkx> string to the terminal before they exit. 2787# 2788# Here's a diagram of the VT100 keypad keys with their bindings. 2789# The top line is the name of the key (some DEC keyboards have the keys 2790# labelled somewhat differently, like GOLD instead of PF1, but this is 2791# the most "official" name). The second line is the escape sequence it 2792# generates in Application Keypad mode (where "$" means the ESC 2793# character). The third line contains two items, first the mapping of 2794# the key in terminfo, and then in termcap. 2795# _______________________________________ 2796# | PF1 | PF2 | PF3 | PF4 | 2797# | $OP | $OQ | $OR | $OS | 2798# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| 2799# | 7 8 9 - | 2800# | $Ow | $Ox | $Oy | $Om | 2801# |_kf9__k9_|_kf10_k;_|_kf0__k0_|_________| 2802# | 4 | 5 | 6 | , | 2803# | $Ot | $Ou | $Ov | $Ol | 2804# |_kf5__k5_|_kf6__k6_|_kf7__k7_|_kf8__k8_| 2805# | 1 | 2 | 3 | | 2806# | $Oq | $Or | $Os | enter | 2807# |_ka1__K1_|_kb2__K2_|_ka3__K3_| $OM | 2808# | 0 | . | | 2809# | $Op | $On | | 2810# |___kc1_______K4____|_kc3__K5_|_kent_@8_| 2811# 2812# Note however, that the arrangement of the 5-key ka1-kc3 do not follow the 2813# terminfo guidelines. That is a compromise used to assign the remaining 2814# keys on the keypad to kf5-kf0, used on older systems with legacy termcap 2815# support: 2816vt100+keypad|dec vt100 numeric keypad no fkeys, 2817 ka1=\EOq, ka3=\EOs, kb2=\EOr, kc1=\EOp, kc3=\EOn, 2818vt100+pfkeys|dec vt100 numeric keypad, 2819 kent=\EOM, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 2820 use=vt100+keypad, 2821vt100+fnkeys|dec vt100 numeric keypad, 2822 kf0=\EOy, kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, 2823 kf9=\EOw, use=vt100+pfkeys, 2824# 2825# A better adaptation to modern keyboards such as the PC's, which have a dozen 2826# function keys and the keypad 2,4,6,8 keys are labeled with arrows keys, is to 2827# use the 5-key arrangement to model the arrow keys as suggested in the 2828# terminfo guidelines: 2829# _______________________________________ 2830# | PF1 | PF2 | PF3 | PF4 | 2831# | $OP | $OQ | $OR | $OS | 2832# |_kf1__k1_|_kf2__k2_|_kf3__k3_|_kf4__k4_| 2833# | 7 8 9 - | 2834# | $Ow | $Ox | $Oy | $Om | 2835# |_ka1__K1_|_________|_ka3__K3_|_________| 2836# | 4 | 5 | 6 | , | 2837# | $Ot | $Ou | $Ov | $Ol | 2838# |_________|_kb2__K2_|_________|_________| 2839# | 1 | 2 | 3 | | 2840# | $Oq | $Or | $Os | enter | 2841# |_kc1__K4_|_________|_kc3__K5_| $OM | 2842# | 0 | . | | 2843# | $Op | $On | | 2844# |___________________|_________|_kent_@8_| 2845# 2846vt220+keypad|dec vt220 numeric keypad, 2847 ka1=\EOw, ka3=\EOy, kb2=\EOu, kc1=\EOq, kc3=\EOs, kent=\EOM, 2848 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, ka2=\EOx, kb1=\EOt, 2849 kb3=\EOv, kc2=\EOr, 2850# 2851vt100+enq|ncurses extension for vt100-style ENQ, 2852 u8=\E[?1;2c, use=ansi+enq, 2853vt102+enq|ncurses extension for vt102-style ENQ, 2854 u8=\E[?6c, use=ansi+enq, 2855# 2856# And here, for those of you with orphaned VT100s lacking documentation, is 2857# a description of the soft switches invoked when you do `Set Up'. 2858# 2859# Scroll 0-Jump Shifted 3 0-# 2860# | 1-Smooth | 1-British pound sign 2861# | Autorepeat 0-Off | Wrap Around 0-Off 2862# | | 1-On | | 1-On 2863# | | Screen 0-Dark Bkg | | New Line 0-Off 2864# | | | 1-Light Bkg | | | 1-On 2865# | | | Cursor 0-Underline | | | Interlace 0-Off 2866# | | | | 1-Block | | | | 1-On 2867# | | | | | | | | 2868# 1 1 0 1 1 1 1 1 0 1 0 0 0 0 1 0 <--Standard Settings 2869# | | | | | | | | 2870# | | | Auto XON/XOFF 0-Off | | | Power 0-60 Hz 2871# | | | 1-On | | | 1-50 Hz 2872# | | Ansi/VT52 0-VT52 | | Bits Per Char. 0-7 Bits 2873# | | 1-ANSI | | 1-8 Bits 2874# | Keyclick 0-Off | Parity 0-Off 2875# | 1-On | 1-On 2876# Margin Bell 0-Off Parity Sense 0-Odd 2877# 1-On 1-Even 2878# 2879# The following SET-UP modes are assumed for normal operation: 2880# ANSI_MODE AUTO_XON/XOFF_ON NEWLINE_OFF 80_COLUMNS 2881# WRAP_AROUND_ON JUMP_SCROLL_OFF 2882# Other SET-UP modes may be set for operator convenience or communication 2883# requirements; I recommend 2884# AUTOREPEAT_ON BLOCK_CURSOR MARGIN_BELL_OFF SHIFTED_3_# 2885# Unless you have a graphics add-on such as Digital Engineering's VT640 2886# (and even then, whenever it can be arranged!) you should set 2887# INTERLACE_OFF 2888# 2889# (vt100: I added <rmam>/<smam> based on the init string, also <OTbs>. -- esr) 2890vt100|vt100-am|dec vt100 (w/advanced video), 2891 OTbs, am, mc5i, msgr, xenl, xon, 2892 cols#80, it#8, lines#24, vt#3, 2893 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 2894 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 2895 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2896 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 2897 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 2898 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 2899 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 2900 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, 2901 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, lf1=pf1, 2902 lf2=pf2, lf3=pf3, lf4=pf4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 2903 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 2904 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 2905 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2906 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 2907 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 2908 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 2909 use=vt100+fnkeys, 2910vt100nam|vt100-nam|vt100 no automargins, 2911 am@, xenl@, use=vt100-am, 2912vt100-vb|dec vt100 (w/advanced video) & no beep, 2913 bel@, flash=\E[?5h\E[?5l, use=vt100, 2914 2915# Ordinary vt100 in 132 column ("wide") mode. 2916vt100-w|vt100-w-am|dec vt100 132 cols (w/advanced video), 2917 cols#132, lines#24, 2918 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-am, 2919vt100-w-nam|vt100-nam-w|dec vt100 132 cols (w/advanced video no automargin), 2920 cols#132, lines#14, vt@, 2921 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=vt100-nam, 2922 2923# vt100 with no advanced video. 2924vt100-nav|vt100 without advanced video option, 2925 xmc#1, 2926 blink@, bold@, rev@, rmso=\E[m, rmul@, sgr@, sgr0@, smso=\E[7m, 2927 smul@, use=vt100, 2928vt100-nav-w|vt100-w-nav|dec vt100 132 cols 14 lines (no advanced video option), 2929 cols#132, lines#14, use=vt100-nav, 2930 2931# vt100 with one of the 24 lines used as a status line. 2932# We put the status line on the top. 2933vt100-s|vt100-s-top|vt100-top-s|vt100 for use with top sysline, 2934 eslok, hs, 2935 lines#23, 2936 clear=\E[2;1H\E[J$<50>, csr=\E[%i%i%p1%d;%p2%dr, 2937 cup=\E[%i%p1%{1}%+%d;%p2%dH$<5>, dsl=\E7\E[1;24r\E8, 2938 fsl=\E8, home=\E[2;1H, is2=\E7\E[2;24r\E8, 2939 tsl=\E7\E[1;%p1%dH\E[1K, use=vt100-am, 2940 2941# Status line at bottom. 2942# Clearing the screen will clobber status line. 2943vt100-s-bot|vt100-bot-s|vt100 for use with bottom sysline, 2944 eslok, hs, 2945 lines#23, 2946 dsl=\E7\E[1;24r\E8, fsl=\E8, is2=\E[1;23r\E[23;1H, 2947 tsl=\E7\E[24;%p1%dH\E[1K, use=vt100-am, 2948 2949# Most of the `vt100' emulators out there actually emulate a vt102 2950# This entry (or vt102-nsgr) is probably the right thing to use for 2951# these. 2952vt102|dec vt102, 2953 dch1=\E[P, dl1=\E[M, il1=\E[L, rmir=\E[4l, smir=\E[4h, 2954 use=vt100, 2955vt102-w|dec vt102 in wide mode, 2956 cols#132, 2957 rs3=\E[?3h, use=vt102, 2958 2959# Many brain-dead PC comm programs that pretend to be `vt100-compatible' 2960# fail to interpret the ^O and ^N escapes properly. Symptom: the <sgr0> 2961# string in the canonical vt100 entry above leaves the screen littered 2962# with little snowflake or star characters (IBM PC ROM character \017 = ^O) 2963# after highlight turnoffs. This entry should fix that, and even leave 2964# ACS support working, at the cost of making multiple-highlight changes 2965# slightly more expensive. 2966# From: Eric S. Raymond <esr@snark.thyrsus.com> July 22 1995 2967vt102-nsgr|vt102 no sgr (use if you see snowflakes after highlight changes), 2968 sgr@, sgr0=\E[m, use=vt102, 2969 2970# VT125 Graphics CRT. Clear screen also erases graphics 2971# Some vt125's came configured with vt102 support. 2972vt125|vt125 graphics terminal, 2973 mir, 2974 clear=\E[H\E[2J\EPpS(E)\E\\$<50>, use=vt100, 2975 2976# This isn't a DEC entry, it came from University of Wisconsin. 2977# (vt131: I added <rmam>/<smam> based on the init string, also <OTbs> -- esr) 2978vt131|dec vt131, 2979 OTbs, am, xenl, 2980 cols#80, it#8, lines#24, vt#3, 2981 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 2982 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 2983 cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 2984 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 2985 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 2986 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 2987 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 2988 kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, ri=\EM$<5/>, 2989 rmam=\E[?7h, rmkx=\E[?1l\E>, rmso=\E[m$<2/>, 2990 rmul=\E[m$<2/>, 2991 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 2992 sgr0=\E[m$<2/>, smam=\E[?7h, smkx=\E[?1h\E=, 2993 smso=\E[7m$<2/>, smul=\E[4m$<2/>, 2994 2995# vt132 - like vt100 but slower and has ins/del line and such. 2996# I'm told that <smir>/<rmir> are backwards in the terminal from the 2997# manual and from the ANSI standard, this describes the actual 2998# terminal. I've never actually used a vt132 myself, so this 2999# is untested. 3000# 3001vt132|DEC vt132, 3002 xenl, 3003 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 3004 ip=$<7>, rmir=\E[4h, smir=\E[4l, use=vt100, 3005 3006# This vt220 description maps F5--F9 to the second block of function keys 3007# at the top of the keyboard. The "DO" key is used as F10 to avoid conflict 3008# with the key marked (ESC) on the vt220. See vt220d for an alternate mapping. 3009# PF1--PF4 are used as F1--F4. 3010# 3011# added msgr -TD 3012vt220-old|vt200-old|DEC VT220 in vt100 emulation mode, 3013 OTbs, OTpt, am, mir, msgr, xenl, xon, 3014 cols#80, lines#24, vt#3, 3015 OTnl=^J, 3016 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3017 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, 3018 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, 3019 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 3020 cup=\E[%i%p1%d;%p2%dH$<10>, cuu1=\E[A, dch1=\E[P, 3021 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 3022 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED$<20/>, 3023 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\E[D, kcud1=\E[B, 3024 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\EOP, 3025 kf10=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, 3026 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, 3027 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rc=\E8, 3028 rev=\E[7m$<2>, rf=/usr/share/tabset/vt100, 3029 ri=\EM$<14/>, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, 3030 rmso=\E[27m, rmul=\E[24m, 3031 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 3032 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 3033 sgr0=\E[m$<2>, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 3034 smso=\E[7m, smul=\E[4m, 3035 3036# A much better description of the VT200/220; used to be vt220-8 3037# changed rmacs/smacs from shift-in/shift-out to vt200-old's explicit G0/G1 3038# designation to accommodate bug in pcvt -TD 3039# 3040# Here's a picture of the VT220 editing keypad: 3041# +--------+--------+--------+ 3042# | Find | Insert | Remove | 3043# +--------+--------+--------+ 3044# | Select | Prev | Next | 3045# +--------+--------+--------+ 3046vt220|vt200|dec vt220, 3047 OTbs, am, mir, msgr, xenl, xon, 3048 cols#80, it#8, lines#24, vt#3, 3049 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3050 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 3051 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3052 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3053 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3054 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3055 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 3056 flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, hts=\EH, 3057 ich=\E[%p1%d@, if=/usr/share/tabset/vt100, 3058 il=\E[%p1%dL, il1=\E[L, ind=\ED, 3059 is2=\E[?7h\E[>\E[?1l\E F\E[?4l, kbs=^H, kcub1=\E[D, 3060 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, 3061 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 3062 kf14=\E[26~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 3063 kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 3064 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 3065 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 3066 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, 3067 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B$<4>, 3068 rmam=\E[?7l, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 3069 rs1=\E[?3l, sc=\E7, 3070 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 3071 sgr0=\E[m\E(B, smacs=\E(0$<2>, smam=\E[?7h, smir=\E[4h, 3072 smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=ansi+pp, 3073 use=ansi+enq, 3074vt220-w|vt200-w|DEC vt220 in wide mode, 3075 cols#132, 3076 rs3=\E[?3h, use=vt220, 3077vt220-8bit|vt220-8|vt200-8bit|vt200-8|dec vt220/200 in 8-bit mode, 3078 OTbs, am, mc5i, mir, msgr, xenl, xon, 3079 cols#80, it#8, lines#24, vt#3, 3080 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3081 bel=^G, blink=\2335m, bold=\2331m, clear=\233H\233J, cr=^M, 3082 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=^H, 3083 cud=\233%p1%dB, cud1=^J, cuf=\233%p1%dC, cuf1=\233C, 3084 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\233A, 3085 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 3086 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, enacs=\E)0, 3087 flash=\233?5h$<200/>\233?5l, home=\233H, ht=^I, hts=\EH, 3088 ich=\233%p1%d@, if=/usr/share/tabset/vt100, 3089 il=\233%p1%dL, il1=\233L, ind=\ED, 3090 is2=\233?7h\233>\233?1l\E F\233?4l, kbs=^H, 3091 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 3092 kdch1=\2333~, kf1=\EOP, kf10=\23321~, kf11=\23323~, 3093 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf17=\23331~, 3094 kf18=\23332~, kf19=\23333~, kf2=\EOQ, kf20=\23334~, 3095 kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, kf8=\23319~, 3096 kf9=\23320~, kfnd=\2331~, khlp=\23328~, khome=\233H, 3097 kich1=\2332~, knp=\2336~, kpp=\2335~, krdo=\23329~, 3098 kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, mc0=\233i, 3099 mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, rev=\2337m, ri=\EM, 3100 rmacs=\E(B, rmam=\233?7l, rmir=\2334l, rmso=\23327m, 3101 rmul=\23324m, rs1=\233?3l, sc=\E7, 3102 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 3103 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, smir=\2334h, 3104 smso=\2337m, smul=\2334m, tbc=\2333g, 3105 3106# vt220d: 3107# This vt220 description regards F6--F10 as the second block of function keys 3108# at the top of the keyboard. This mapping follows the description given 3109# in the VT220 Programmer Reference Manual and agrees with the labeling 3110# on some terminals that emulate the vt220. There is no support for an F5. 3111# See vt220 for an alternate mapping. 3112# 3113vt220d|DEC VT220 in vt100 mode with DEC function key labeling, 3114 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 3115 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 3116 kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, kf5@, kf6=\E[17~, 3117 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, use=vt220-old, 3118 3119vt220-nam|v200-nam|VT220 in vt100 mode with no auto margins, 3120 am@, 3121 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 3122 3123# vt220 termcap written Tue Oct 25 20:41:10 1988 by Alex Latzko 3124# (not an official DEC entry!) 3125# The problem with real vt220 terminals is they don't send escapes when in 3126# in vt220 mode. This can be gotten around two ways. 1> don't send 3127# escapes or 2> put the vt220 into vt100 mode and use all the nifty 3128# features of vt100 advanced video which it then has. 3129# 3130# This entry takes the view of putting a vt220 into vt100 mode so 3131# you can use the escape key in emacs and everything else which needs it. 3132# 3133# You probably don't want to use this on a VMS machine since VMS will think 3134# it has a vt220 and will get fouled up coming out of emacs 3135# 3136# From: Alexander Latzko <latzko@marsenius.rutgers.edu>, 30 Dec 1996 3137# (Added vt100 <rc>,<sc> to quiet a tic warning -- esr) 3138# added msgr -TD 3139vt200-js|vt220-js|dec vt200 series with jump scroll, 3140 am, msgr, 3141 cols#80, 3142 bel=^G, clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 3143 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 3144 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 3145 ht=^I, il1=\E[L, ind=\ED, 3146 is2=\E[61"p\E[H\E[?3l\E[?4l\E[?1h\E[?5l\E[?6l\E[?7h\E[?8h\E[?25h\E>\E[m, 3147 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3148 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=^M\ED, rc=\E8, 3149 rf=/usr/share/tabset/vt100, ri=\EM, rmdc=, rmir=\E[4l, 3150 rmkx=\E[?1l\E>, rmso=\E[27m$<5/>, rmul=\E[24m, 3151 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, smdc=, 3152 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m$<5/>, smul=\E[4m, 3153 3154# This was DEC's vt320. Use the purpose-built one below instead 3155#vt320|DEC VT320 in vt100 emulation mode, 3156# use=vt220, 3157 3158# Use v320n for SCO's LYRIX. Otherwise, use Adam Thompson's vt320-nam. 3159# 3160vt320nam|v320n|DEC VT320 in vt100 emul. mode with NO AUTO WRAP mode, 3161 am@, 3162 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h, use=vt220, 3163 3164# These entries are not DEC's official ones, they were purpose-built for the 3165# VT320. Here are the designer's notes: 3166# <kel> is end on a PC kbd. Actually 'select' on a VT. Mapped to 3167# 'Erase to End of Field'... since nothing seems to use 'end' anyways... 3168# khome is Home on a PC kbd. Actually 'FIND' on a VT. 3169# Things that use <knxt> usually use tab anyways... and things that don't use 3170# tab usually use <knxt> instead... 3171# kprv is same as tab - Backtab is useless... 3172# I left out <sgr> because of its RIDICULOUS complexity, 3173# and the resulting fact that it causes the termcap translation of the entry 3174# to SMASH the 1k-barrier... 3175# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 3176# (vt320: uncommented <fsl> --esr) 3177vt320|vt300|dec vt320 7 bit terminal, 3178 am, hs, mir, msgr, xenl, 3179 cols#80, lines#24, wsl#80, 3180 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3181 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 3182 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 3183 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3184 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3185 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3186 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3187 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, 3188 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 3189 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 3190 kbs=\177, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3191 kdch1=\E[3~, kel=\E[4~, kf10=\E[21~, kf11=\E[23~, 3192 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 3193 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 3194 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 3195 kf9=\E[20~, khome=\E[1~, kich1=\E[2~, knp=\E[6~, knxt=^I, 3196 kpp=\E[5~, kprv=\E[Z, kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, 3197 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 3198 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 3199 rmul=\E[m, 3200 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 3201 sc=\E7, 3202 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 3203 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 3204 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3205 use=dec+pp, use=vt220+keypad, use=dec+sl, use=ansi+enq, 3206vt320-nam|vt300-nam|dec vt320 7 bit terminal with no am to make SAS happy, 3207 am@, 3208 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 3209 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 3210 use=vt320, 3211# We have to init 132-col mode, not 80-col mode. 3212vt320-w|vt300-w|dec vt320 wide 7 bit terminal, 3213 cols#132, wsl#132, 3214 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 3215 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 3216 use=vt320, 3217vt320-w-nam|vt300-w-nam|dec vt320 wide 7 bit terminal with no am, 3218 am@, 3219 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 3220 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;24r\E[24;1H, 3221 use=vt320-w, 3222 3223# VT330 and VT340 -- These are ReGIS and SIXEL graphics terminals 3224# which are pretty much a superset of the VT320. They have the 3225# host writable status line, yet another different DRCS matrix size, 3226# and such, but they add the DEC Technical character set, Multiple text 3227# pages, selectable length pages, and the like. The difference between 3228# the vt330 and vt340 is that the latter has only 2 planes and a monochrome 3229# monitor, the former has 4 planes and a color monitor. These terminals 3230# support VT131 and ANSI block mode, but as with much of these things, 3231# termcap/terminfo doesn't deal with these features. 3232# 3233# Note that this entry is are set up in what was the standard way for GNU 3234# Emacs v18 terminal modes to deal with the cursor keys in that the arrow 3235# keys were switched into application mode at the same time the numeric pad 3236# is switched into application mode. This changes the definitions of the 3237# arrow keys. Emacs v19 is smarter and mines its keys directly out of 3238# your termcap or terminfo entry, 3239# 3240# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 3241# (vt340: string capability "sb=\E[M" corrected to "sr"; 3242# also, added <rmam>/<smam> based on the init string -- esr) 3243vt340|dec-vt340|vt330|dec-vt330|dec vt340 graphics terminal with 24 line page, 3244 am, eslok, hs, mir, msgr, xenl, xon, 3245 cols#80, it#8, lines#24, vt#3, 3246 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3247 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, 3248 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 3249 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 3250 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 3251 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 3252 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[2$~\r\E[1$}\E[K\E[$}, 3253 ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, 3254 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, 3255 il1=\E[L, ind=\ED, 3256 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 3257 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3258 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 3259 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 3260 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 3261 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 3262 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 3263 rmul=\E[24m, rs1=\E[?3l, sc=\E7, 3264 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 3265 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 3266 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3267 tsl=\E[2$~\E[1$}\E[1;%dH, 3268 3269# DEC doesn't supply a vt400 description, so we add Daniel Glasser's 3270# (originally written with vt420 as its primary name, and usable for it). 3271# 3272# VT400/420 -- This terminal is a superset of the vt320. It adds the multiple 3273# text pages and long text pages with selectable length of the vt340, along 3274# with left and right margins, rectangular area text copy, fill, and erase 3275# operations, selected region character attribute change operations, 3276# page memory and rectangle checksums, insert/delete column, reception 3277# macros, and other features too numerous to remember right now. TERMCAP 3278# can only take advantage of a few of these added features. 3279# 3280# Note that this entry is are set up in what was the standard way for GNU 3281# Emacs v18 terminal modes to deal with the cursor keys in that the arrow 3282# keys were switched into application mode at the same time the numeric pad 3283# is switched into application mode. This changes the definitions of the 3284# arrow keys. Emacs v19 is smarter and mines its keys directly out of 3285# your termcap entry, 3286# 3287# From: Daniel Glasser <dag@persoft.persoft.com>, 13 Oct 1993 3288# (vt400: string capability ":sb=\E[M:" corrected to ":sr=\E[M:"; 3289# also, added <rmam>/<smam> based on the init string -- esr) 3290vt400|vt400-24|dec-vt400|dec vt400 24x80 column autowrap, 3291 am, eslok, hs, mir, msgr, xenl, xon, 3292 cols#80, it#8, lines#24, vt#3, 3293 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3294 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 3295 clear=\E[H\E[J$<10/>, cnorm=\E[?25h, cr=^M, 3296 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3297 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3298 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3299 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3300 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J$<10/>, 3301 el=\E[K$<4/>, flash=\E[?5h\E[?5l$<200/>, fsl=\E[$}, 3302 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 3303 il=\E[%p1%dL, il1=\E[L, ind=\ED, 3304 is2=\E<\E F\E>\E[?1h\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 3305 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3306 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 3307 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 3308 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 3309 rf=/usr/share/tabset/vt300, ri=\EM, rmacs=\E(B, 3310 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 3311 rmul=\E[24m, rs1=\E<\E[?3l\E[!p\E[?7h, sc=\E7, 3312 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 3313 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 3314 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3315 tsl=\E[2$~\E[1$}\E[1;%dH, use=dec+sl, 3316 3317# (vt420: I removed <kf0>, it collided with <kf10>. I also restored 3318# a missing <sc> -- esr) 3319# add msgr and other capabilities from vt220 -TD 3320vt420|DEC VT420, 3321 am, mir, msgr, xenl, xon, 3322 cols#80, it#8, lines#24, vt#3, 3323 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3324 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, civis=\E[?25l, 3325 clear=\E[H\E[2J$<50>, cnorm=\E[?25h, cr=^M, 3326 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3327 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3328 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA, cuu1=\E[A, 3329 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3330 ech=\E[%p1%dX, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K, 3331 enacs=\E)0, flash=\E[?5h$<200/>\E[?5l, home=\E[H, ht=^I, 3332 hts=\EH, ich=\E[%p1%d@, if=/usr/share/tabset/vt300, 3333 il=\E[%p1%dL, il1=\E[L, ind=\ED, is2=\E[1;24r\E[24;1H, 3334 is3=\E[?67h\E[64;1"p, kbs=^H, kcub1=\E[D, kcud1=\E[B, 3335 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[29~, 3336 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\E[17~, kf6=\E[18~, 3337 kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, kfnd=\E[1~, 3338 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, nel=\EE, 3339 rc=\E8, rev=\E[7m$<2>, rf=/usr/share/tabset/vt300, 3340 ri=\EM, rmacs=\E(B$<4>, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, 3341 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 3342 rmso=\E[27m, rmul=\E[24m, rs3=\E[?67h\E[64;1"p, sc=\E7, 3343 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;$<2>, 3344 sgr0=\E[m\E(B$<2>, smacs=\E(0$<2>, smam=\E[?7h, 3345 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3346 use=ansi+pp, use=dec+sl, use=ansi+enq, 3347 3348# DEC VT220 and up support DECUDK (user-defined keys). DECUDK (i.e., pfx) 3349# takes two parameters, the key and the string. Translating the key is 3350# straightforward (keys 1-5 are not defined on real terminals, though some 3351# emulators define these): 3352# 3353# if (key < 16) then value = key; 3354# else if (key < 21) then value = key + 1; 3355# else if (key < 25) then value = key + 2; 3356# else if (key < 27) then value = key + 3; 3357# else if (key < 30) then value = key + 4; 3358# else value = key + 5; 3359# 3360# The string must be the hexadecimal equivalent, e.g., "5052494E" for "PRINT". 3361# There's no provision in terminfo for emitting a string in this format, so the 3362# application has to know it. 3363# 3364vt420pc|DEC VT420 w/PC keyboard, 3365 kdch1=\177, kend=\E[4~, kf1=\E[11~, kf10=\E[21~, 3366 kf11=\E[23~, kf12=\E[24~, kf13=\E[11;2~, kf14=\E[12;2~, 3367 kf15=\E[13;2~, kf16=\E[14;2~, kf17=\E[15;2~, 3368 kf18=\E[17;2~, kf19=\E[18;2~, kf2=\E[12~, kf20=\E[19;2~, 3369 kf21=\E[20;2~, kf22=\E[21;2~, kf23=\E[23;2~, 3370 kf24=\E[24;2~, kf25=\E[23~, kf26=\E[24~, kf27=\E[25~, 3371 kf28=\E[26~, kf29=\E[28~, kf3=\E[13~, kf30=\E[29~, 3372 kf31=\E[31~, kf32=\E[32~, kf33=\E[33~, kf34=\E[34~, 3373 kf35=\E[35~, kf36=\E[36~, kf37=\E[23;2~, kf38=\E[24;2~, 3374 kf39=\E[25;2~, kf4=\E[14~, kf40=\E[26;2~, kf41=\E[28;2~, 3375 kf42=\E[29;2~, kf43=\E[31;2~, kf44=\E[32;2~, 3376 kf45=\E[33;2~, kf46=\E[34;2~, kf47=\E[35;2~, 3377 kf48=\E[36;2~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 3378 kf8=\E[19~, kf9=\E[20~, khome=\E[H, 3379 pctrm=USR_TERM\:vt420pcdos\:, 3380 pfx=\EP1;1|%?%{16}%p1%>%t%{0}%e%{21}%p1%>%t%{1}%e%{25}%p1%>%t%{2}%e%{27}%p1%>%t%{3}%e%{30}%p1%>%t%{4}%e%{5}%;%p1%+%d/%p2%s\E\\, 3381 use=vt420, 3382 3383vt420pcdos|DEC VT420 w/PC for DOS Merge, 3384 lines#25, 3385 dispc=%?%p1%{19}%=%t\E\023\021%e%p1%{32}%<%t\E%p1%c%e%p1%{127}%=%t\E\177%e%p1%c%;, 3386 pctrm@, 3387 rmsc=\E[?0;0r\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr@, 3388 sgr0=\E[m, smsc=\E[?1;2r\E[34h, use=vt420pc, 3389 3390vt420f|DEC VT420 with VT kbd; VT400 mode; F1-F5 used as Fkeys, 3391 kdch1=\177, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 3392 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 3393 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 3394 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 3395 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3396 khome=\E[H, lf1=\EOP, lf2=\EOQ, lf3=\EOR, lf4=\EOS, 3397 use=vt420, 3398 3399vt510|DEC VT510, 3400 use=vt420, 3401vt510pc|DEC VT510 w/PC keyboard, 3402 use=vt420pc, 3403vt510pcdos|DEC VT510 w/PC for DOS Merge, 3404 use=vt420pcdos, 3405 3406# VT520/VT525 3407# 3408# The VT520 is a monochrome text terminal capable of managing up to 3409# four independent sessions in the terminal. It has multiple ANSI 3410# emulations (VT520, VT420, VT320, VT220, VT100, VT PCTerm, SCO Console) 3411# and ASCII emulations (WY160/60, PCTerm, 50/50+, 150/120, TVI 950, 3412# 925 910+, ADDS A2). This terminfo data is for the ANSI emulations only. 3413# 3414# Terminal Set-Up is entered by pressing [F3], [Caps Lock]/[F3] or 3415# [Alt]/[Print Screen] depending upon which keyboard and which 3416# terminal mode is being used. If Set-Up has been disabled or 3417# assigned to an unknown key, Set-Up may be entered by pressing 3418# [F3] as the first key after power up, regardless of keyboard type. 3419vt520|DEC VT520, 3420 use=ansi+rca, use=vt420, use=ansi+tabs, 3421 3422vt525|DEC VT525, 3423 use=vt520, 3424 3425#### VT100 emulations 3426# 3427 3428# John Hawkinson <jhawk@MIT.EDU> tells us that the EWAN telnet for Windows 3429# (the best Windows telnet as of September 1995) presents the name `dec-vt100' 3430# to telnetd. Michael Deutschmann <ldeutsch@mail.netshop.net> informs us 3431# that this works best with a stock vt100 entry. 3432dec-vt100|EWAN telnet's vt100 emulation, 3433 use=vt100, 3434 3435# From: Adrian Garside <94ajg2@eng.cam.ac.uk>, 19 Nov 1996 3436dec-vt220|DOS tnvt200 terminal emulator, 3437 am@, use=vt220, 3438 3439# Zstem340 is an (IMHO) excellent VT emulator for PC's. I recommend it to 3440# anyone who needs PC VT340 emulation. (or anything below that level, for 3441# that matter -- DEC's ALL-in-1 seems happy with it, as does INFOPLUS's 3442# RDBM systems, it includes ReGIS and SiXel support! I'm impressed... 3443# I can send the address if requested. 3444# (z340: changed garbled \E[5?l to \E[?5l, DEC smooth scroll off -- esr) 3445# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 3446z340|zstem vt340 terminal emulator 132col 42line, 3447 lines#42, 3448 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 3449 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h\E[1;42r\E[42;1H, 3450 use=vt320-w, 3451z340-nam|zstem vt340 terminal emulator 132col 42line (no automatic margins), 3452 am@, 3453 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 3454 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7l\E[?8h\E[1;42r\E[42;1H, 3455 use=z340, 3456 3457# CRT is shareware. It implements some xterm features, including mouse. 3458crt|crt-vt220|CRT 2.3 emulating VT220, 3459 bce, msgr, 3460 ncv@, 3461 hts=\EH, use=vt100+enq, use=vt220, use=ecma+color, 3462 3463# PuTTY 0.55 (released 3 August 2004) 3464# http://www.chiark.greenend.org.uk/~sgtatham/putty/ 3465# 3466# Comparing with 0.51, vttest is much better (only a few problems with the 3467# cursor position reports and wrapping). 3468# 3469# PuTTY 0.51 (released 14 December 2000) 3470# 3471# This emulates vt100 + vt52 (plus a few vt220 features: ech, SRM, DECTCEM, as 3472# well as SCO and Atari, color palettes from Linux console). Reading the code, 3473# it is intended to be VT102 plus selected features. By default, it sets $TERM 3474# to xterm, which is incorrect, since several features are misimplemented: 3475# 3476# Alt+key always sends ESC+key, so 'km' capability is removed. 3477# 3478# Control responses, wrapping and tabs are buggy, failing a couple of 3479# screens in vttest. 3480# 3481# xterm mouse support is not implemented (unrelease version may). 3482# 3483# Several features such as backspace/delete are optional; this entry documents 3484# the default behavior -TD 3485 3486putty|PuTTY terminal emulator, 3487 am, bce, bw, ccc, mir, msgr, xenl, xon, XT, 3488 colors#8, it#8, ncv#22, pairs#64, U8#1, 3489 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3490 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 3491 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 3492 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3493 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, 3494 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 3495 dch=\E[%p1%dP, dch1=\E[P, 3496 dispc=%?%p1%{8}%=%t\E%%G\342\227\230\E%%@%e%p1%{10}%=%t\E%%G\342\227\231\E%%@%e%p1%{12}%=%t\E%%G\342\231\0\E%%@%e%p1%{13}%=%t\E%%G\342\231\252\E%%@%e%p1%{14}%=%t\E%%G\342\231\253\E%%@%e%p1%{15}%=%t\E%%G\342\230\274\E%%@%e%p1%{27}%=%t\E%%G\342\206\220\E%%@%e%p1%{155}%=%t\E%%G\340\202\242\E%%@%e%p1%c%;, 3497 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 3498 el1=\E[1K, enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, 3499 hpa=\E[%i%p1%dG, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, 3500 ind=^J, indn=\E[%p1%dS, 3501 initc=\E]P%p1%x%p2%{255}%*%{1000}%/%02x%p3%{255}%*%{1000}%/%02x%p4%{255}%*%{1000}%/%02x, 3502 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>\E]R, 3503 kb2=\E[G, kbs=\177, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 3504 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, 3505 kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3506 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 3507 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, 3508 kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, 3509 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3510 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 3511 kspd=^Z, nel=^M^J, oc=\E]R, op=\E[39;49m, rc=\E8, rev=\E[7m, 3512 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, 3513 rmcup=\E[2J\E[?47l, rmir=\E[4l, rmpch=\E[10m, 3514 rmso=\E[27m, rmul=\E[24m, 3515 rs2=\E<\E["p\E[50;6"p\Ec\E[?3l\E]R\E[?1000l, 3516 s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, sc=\E7, 3517 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 3518 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3519 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[?47h, 3520 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, 3521 tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J, use=vt102+enq, 3522 use=xterm+sl, 3523vt100-putty|Reset PuTTY to pure vt100, 3524 rs2=\E<\E["p\Ec\E[?3l\E]R\E[40"p\E[61"p\E[50;1;2"p, 3525 use=vt100, 3526# palette is hardcoded... 3527putty-256color|PuTTY 0.58 with xterm 256-colors, 3528 initc@, use=xterm+256color, use=putty, 3529 3530# One of the keyboard selections is "VT100+". 3531# pterm (the X11 port) uses shifted F1-F10 as F11-F20 3532putty-vt100|VT100+ keyboard layout, 3533 kf1=\EOP, kf10=\EOY, kf11=\EOZ, kf12=\EO[, kf2=\EOQ, 3534 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 3535 kf9=\EOX, use=putty, 3536 3537# Unlike xterm-sco, this leaves kmous ambiguous with kf1. 3538# 3539# Use modifiers to obtain function keys past 12: 3540# F1-F12 - normal 3541# F13-F24 - shift 3542# F25-F36 - control/alt 3543# F37-F48 - control/shift 3544# 3545putty-sco|putty with SCO function keys, 3546 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 3547 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 3548 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, 3549 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, 3550 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, 3551 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, 3552 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, 3553 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, 3554 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, 3555 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, 3556 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 3557 kich1=\E[L, knp=\E[G, kpp=\E[I, use=putty, 3558 3559# This entry is for Tera Term Pro version 2.3, for MS-Windows 95/NT written by 3560# T. Teranishi dated Mar 10, 1998. It is a free software terminal emulator 3561# (communication program) which supports: 3562# 3563# - Serial port connections. 3564# - TCP/IP (telnet) connections. 3565# - VT100 emulation, and selected VT200/300 emulation. 3566# - TEK4010 emulation. 3567# - File transfer protocols (Kermit, XMODEM, ZMODEM, B-PLUS and 3568# Quick-VAN). 3569# - Scripts using the "Tera Term Language". 3570# - Japanese and Russian character sets. 3571# 3572# The program does not come with terminfo or termcap entries. However, the 3573# emulation (testing with vttest and ncurses) is reasonably close to vt100 (no 3574# vt52 or doublesize character support; blinking is done with color). Besides 3575# the HPA, VPA extensions it also implements CPL and CNL. 3576# 3577# All of the function keys can be remapped. This description shows the default 3578# mapping, as installed. Both vt100 PF1-PF4 keys and quasi-vt220 F1-F4 keys 3579# are supported. F13-F20 are obtained by shifting F3-F10. The editing keypad 3580# is laid out like vt220, rather than the face codes on the PC keyboard, i.e, 3581# kfnd Insert 3582# kslt Delete 3583# kich1 Home 3584# kdch1 PageUp 3585# kpp End 3586# knp PageDown 3587# 3588# ANSI colors are implemented, but cannot be combined with video attributes 3589# except for reverse. 3590# 3591# No fonts are supplied with the program, so the acsc string is chosen to 3592# correspond with the default Microsoft terminal font. 3593# 3594# Tera Term recognizes some xterm sequences, including those for setting and 3595# retrieving the window title, and for setting the window size (i.e., using 3596# "resize -s"), though it does not pass SIGWINCH to the application if the 3597# user resizes the window with the mouse. 3598teraterm2.3|Tera Term Pro, 3599 km, xon@, 3600 ncv#43, vt@, 3601 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 3602 blink=\E[5m, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[J, 3603 cnorm=\E[?25h, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 3604 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 3605 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 3606 flash=\E[?5h\E[?5l$<200/>, hpa=\E[%i%p1%dG, 3607 il=\E[%p1%dL, il1=\E[L, kdch1=\E[3~, kf1=\E[11~, 3608 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 3609 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 3610 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 3611 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 3612 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, 3613 kpp=\E[5~, kslt=\E[4~, op=\E[100m, rev=\E[7m, ri=\EM, 3614 rmso=\E[27m, rmul=\E[24m, sgr0=\E[0m\017, smso=\E[7m, 3615 smul=\E[4m, vpa=\E[%i%p1%dd, use=vt100+enq, 3616 use=klone+color, use=vt100, 3617 3618# Version 4.59 has regular vt100 line-drawing (so it is no longer necessary 3619# to choose a Windows OEM font). 3620# 3621# Testing with tack: 3622# - it does not have xenl (suppress that) 3623# - underline seems to work with color (modify ncv). 3624# Testing with vttest: 3625# - wrapping differs from vt100 (menu 1). 3626# - it recognizes xterm's X10 and normal mouse tracking, but none of the 3627# other flavors. 3628# - it recognizes the dtterm window controls for reporting size in 3629# characters and pixels. 3630# - it passes SIGWINCH. 3631teraterm4.59|Tera Term Pro, 3632 bce, xenl@, 3633 ncv#41, 3634 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3635 kmous=\E[M, use=teraterm2.3, 3636 3637teraterm|Tera Term, 3638 use=teraterm4.59, 3639 3640# Tested with WinNT 4.0, the telnet application assumes the screensize is 3641# 25x80. This entry uses the 'Terminal' font, to get line-drawing characters. 3642# 3643# Other notes: 3644# a) Fails tack's cup (cursor-addressing) test, though cup works well enough 3645# for casual (occasional) use. Also fails several of the vttest screens, 3646# but that is not unusual for vt100 "emulators". 3647# b) Does not implement vt100 keypad 3648# c) Recognizes a subset of vt52 controls. 3649ms-vt100|MS telnet imitating dec vt100, 3650 lines#25, 3651 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 3652 ka1@, ka3@, kb2@, kc1@, kc3@, kent@, kf0@, kf1@, kf10@, kf2@, kf3@, kf4@, 3653 kf5@, kf6@, kf7@, kf8@, kf9@, tbc@, use=vt102+enq, use=vt100, 3654 3655# Tested with Windows 2000, the telnet application runs in a console window, 3656# also using 'Terminal' font. 3657# 3658# Other notes: 3659# a) This version has no function keys or numeric keypad. Unlike the older 3660# version, the numeric keypad is entirely ignored. 3661# b) The program sets $TERM to "ansi", which of course is inaccurate. 3662ms-vt100-color|vtnt|windows 2000 ansi (sic), 3663 bce, 3664 dch=\E[%p1%dP, ich=\E[%p1%d@, use=ecma+color, 3665 use=ms-vt100, 3666 3667# Based on comments from Federico Bianchi: 3668# 3669# vt100+ is basically a VT102-noSGR with ANSI.SYS colors and a different 3670# scheme for PF keys. 3671# 3672# and PuTTY wishlist: 3673# 3674# The modifiers are represented as the codes listed above, prefixed to 3675# the normal sequences. If the modifier is pressed alone, its sequence 3676# is transmitted twice in succession. If multiple modifiers apply, 3677# they're transmitted in the order shift, control, alt. 3678# 3679# Shift \E^S 3680# Alt \E^A, 3681# Ctrl \E^C, 3682ms-vt100+|vt100+|windows XP vt100+ (sic), 3683 kdch1=\E-, kend=\Ek, kf1=\E1, kf10=\E0, kf11=\E!, kf12=\E@, 3684 kf13=\E\023\E1, kf14=\E\023\E2, kf15=\E\023\E3, 3685 kf16=\E\023\E4, kf17=\E\023\E5, kf18=\E\023\E6, 3686 kf19=\E\023\E7, kf2=\E2, kf20=\E\023\E8, kf21=\E\023\E9, 3687 kf22=\E\023\E0, kf23=\E\023\E!, kf24=\E\023\E@, 3688 kf25=\E\003\E1, kf26=\E\003\E2, kf27=\E\003\E3, 3689 kf28=\E\003\E4, kf29=\E\003\E5, kf3=\E3, kf30=\E\003\E6, 3690 kf31=\E\003\E7, kf32=\E\003\E8, kf33=\E\003\E9, 3691 kf34=\E\003\E0, kf35=\E\003\E!, kf36=\E\003\E@, 3692 kf37=\E\001\E1, kf38=\E\001\E2, kf39=\E\001\E3, kf4=\E4, 3693 kf40=\E\001\E4, kf41=\E\001\E5, kf42=\E\001\E6, 3694 kf43=\E\001\E7, kf44=\E\001\E8, kf45=\E\001\E9, 3695 kf46=\E\001\E0, kf47=\E\001\E!, kf48=\E\001\E@, kf5=\E5, 3696 kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, khome=\Eh, kich1=\E+, 3697 knp=\E/, kpp=\E?, use=ms-vt100-color, 3698 3699ms-vt-utf8|vt-utf8|UTF-8 flavor of vt100+, 3700 use=ms-vt100+, 3701 3702# expect-5.44.1.15/example/tkterm 3703# a minimal subset of a vt100 (compare with "news-unk). 3704# 3705# The missing "=" in smkx is not a typo (here), but an error in tkterm. 3706tt|tkterm|Don Libes' tk text widget terminal emulator, 3707 clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 3708 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, ind=^J, kf1=\EOP, kf2=\EOQ, 3709 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 3710 kf9=\EOX, rmkx=\E[?1l\E>, rmso=\E[m, smkx=\E[?1h\E, 3711 smso=\E[7m, 3712 3713######## X TERMINAL EMULATORS 3714#### XTERM 3715# 3716# You can add the following line to your .Xdefaults to change the terminal type 3717# set by the xterms you start up to my-xterm: 3718# 3719# *termName: my-xterm 3720# 3721# System administrators can change the default entry for xterm instances 3722# by adding a similar line to /usr/X11/lib/X11/app-defaults/XTerm. In either 3723# case, xterm will detect and reject an invalid terminal type, falling back 3724# to the default of xterm. 3725# 3726 3727# X10/6.6 11/7/86, minus alternate screen, plus (csr) 3728# (xterm: ":MT:" changed to ":km:"; added <smam>/<rmam> based on init string; 3729# removed (hs, eslok, tsl=\E[?E\E[?%i%dT, fsl=\E[?F, dsl=\E[?E) 3730# as these seem not to work -- esr) 3731x10term|vs100-x10|xterm terminal emulator (X10 window system), 3732 OTbs, am, km, mir, msgr, xenl, xon, 3733 cols#80, it#8, lines#65, 3734 bold=\E[1m, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 3735 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 3736 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 3737 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 3738 il1=\E[L, ind=^J, is2=\E\E[m\E[?7h\E[?1;4l, kbs=^H, 3739 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 3740 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rev=\E[7m, ri=\EM, rmam=\E[?7l, 3741 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 3742 sgr0=\E[m, smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, 3743 smso=\E[7m, smul=\E[4m, 3744# Compatible with the R5 xterm 3745# (from the XFree86 3.2 distribution, <blink=@> removed) 3746# added khome/kend, rmir/smir, rmul/smul, hts based on the R5 xterm code - TD 3747# corrected typos in rs2 string - TD 3748# added u6-u9 -TD 3749xterm-r5|xterm R5 version, 3750 OTbs, am, km, msgr, xenl, 3751 cols#80, it#8, lines#24, 3752 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3753 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3754 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3755 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3756 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3757 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 3758 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 3759 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, 3760 kdl1=\E[31~, kel=\E[8~, kend=\E[4~, kf0=\EOq, kf1=\E[11~, 3761 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 3762 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 3763 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 3764 kil1=\E[30~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, 3765 rev=\E[7m, ri=\EM, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 3766 rmul=\E[m, 3767 rs2=\E>\E[?1;3;4;5;6l\E[4l\E[?7h\E[m\E[r\E[2J\E[H, 3768 sc=\E7, 3769 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 3770 sgr0=\E[m, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 3771 smul=\E[4m, tbc=\E[3g, use=vt100+enq, 3772# Compatible with the R6 xterm 3773# (from XFree86 3.2 distribution, <acsc> and <it> added, <blink@> removed) 3774# added khome/kend, hts based on the R6 xterm code - TD 3775# (khome/kend do not actually work in X11R5 or X11R6, but many people use this 3776# for compatibility with other emulators). 3777xterm-r6|xterm X11R6 version, 3778 OTbs, am, km, mir, msgr, xenl, 3779 cols#80, it#8, lines#24, 3780 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3781 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 3782 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3783 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3784 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3785 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 3786 el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 3787 il1=\E[L, ind=^J, 3788 is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H, 3789 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 3790 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 3791 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 3792 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 3793 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 3794 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 3795 kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 3796 kslt=\E[4~, meml=\El, memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, 3797 rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 3798 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 3799 rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7, 3800 sgr0=\E[m, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 3801 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 3802 use=vt100+enq, 3803xterm-old|antique xterm version, 3804 use=xterm-r6, 3805# This is the base xterm entry for the xterm supplied with XFree86 3.2 & up. 3806# The name has been changed and some aliases have been removed. 3807xterm-xf86-v32|xterm terminal emulator (XFree86 3.2 Window System), 3808 OTbs, am, bce, km, mir, msgr, xenl, XT, 3809 cols#80, it#8, lines#24, ncv@, 3810 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 3811 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 3812 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 3813 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 3814 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 3815 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 3816 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 3817 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 3818 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 3819 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 3820 il1=\E[L, ind=^J, 3821 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 3822 kbeg=\EOE, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 3823 kcuu1=\EOA, kdch1=\177, kend=\EOF, kf1=\E[11~, kf10=\E[21~, 3824 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 3825 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 3826 kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, 3827 kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 3828 kf9=\E[20~, kfnd=\E[1~, khome=\EOH, kich1=\E[2~, 3829 kmous=\E[M, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, meml=\El, 3830 memu=\Em, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, 3831 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E[?1l\E>, 3832 rmso=\E[27m, rmul=\E[24m, rs1=^O, 3833 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>, sc=\E7, 3834 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3835 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 3836 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3837 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 3838 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 3839 tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt100+enq, 3840 use=ecma+color, use=vt220+keypad, 3841 3842# This is the stock xterm entry supplied with XFree86 3.3, which uses VT100 3843# codes for F1-F4 except while in VT220 mode. 3844xterm-xf86-v33|xterm terminal emulator (XFree86 3.3 Window System), 3845 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=xterm-xf86-v32, 3846 3847# This version was released in XFree86 3.3.3 (November 1998). 3848# Besides providing printer support, it exploits a new feature that allows 3849# xterm to use terminfo-based descriptions with the titeInhibit resource. 3850# -- the distribution contained incorrect khome/kend values -TD 3851xterm-xf86-v333|xterm terminal emulator (XFree86 3.3.3 Window System), 3852 blink=\E[5m, ich1@, invis=\E[8m, 3853 is2=\E[!p\E[?3;4l\E[4l\E>, kdch1=\E[3~, kfnd@, kslt@, 3854 rmcup=\E[?1047l\E[?1048l, rs1=\Ec, 3855 rs2=\E[!p\E[?3;4l\E[4l\E>, 3856 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 3857 smcup=\E[?1048h\E[?1047h, use=ansi+pp, 3858 use=xterm-xf86-v33, 3859 3860# This version was released in XFree86 4.0. 3861xterm-xf86-v40|xterm terminal emulator (XFree86 4.0 Window System), 3862 npc, 3863 kDC=\E[3;5~, kEND=\EO5F, kHOM=\EO5H, kIC=\E[2;5~, 3864 kLFT=\EO5D, kNXT=\E[6;5~, kPRV=\E[5;5~, kRIT=\EO5C, ka1@, 3865 ka3@, kb2=\EOE, kc1@, kc3@, kcbt=\E[Z, kdch1=\E[3~, kend=\EOF, 3866 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, 3867 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, 3868 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3869 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, 3870 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf30=\E[17;5~, 3871 kf31=\E[18;5~, kf32=\E[19;5~, kf33=\E[20;5~, 3872 kf34=\E[21;5~, kf35=\E[23;5~, kf36=\E[24;5~, kf37=\EO6P, 3873 kf38=\EO6Q, kf39=\EO6R, kf40=\EO6S, kf41=\E[15;6~, 3874 kf42=\E[17;6~, kf43=\E[18;6~, kf44=\E[19;6~, 3875 kf45=\E[20;6~, kf46=\E[21;6~, kf47=\E[23;6~, 3876 kf48=\E[24;6~, khome=\EOH, rmcup=\E[?1049l, 3877 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 3878 smcup=\E[?1049h, use=xterm-xf86-v333, 3879 3880# This version was released in XFree86 4.3. 3881xterm-xf86-v43|xterm terminal emulator (XFree86 4.3 Window System), 3882 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, 3883 kLFT=\E[1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\E[1;2C, 3884 kbeg@, 3885 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 3886 use=xterm-xf86-v40, 3887 3888# This version was released in XFree86 4.4. 3889xterm-xf86-v44|xterm terminal emulator (XFree86 4.4 Window System), 3890 cnorm=\E[?12l\E[?25h, cvvis=\E[?12;25h, indn=\E[%p1%dS, 3891 rin=\E[%p1%dT, use=xterm-xf86-v43, 3892 3893xterm-xfree86|xterm terminal emulator (XFree86), 3894 use=xterm-xf86-v44, 3895 3896# This version reflects the current xterm features. 3897xterm-new|modern xterm terminal emulator, 3898 npc, 3899 indn=\E[%p1%dS, kb2=\EOE, kcbt=\E[Z, kent=\EOM, 3900 rin=\E[%p1%dT, use=xterm+pcfkeys, use=xterm+tmux, 3901 use=xterm-basic, 3902 3903# This fragment is for people who cannot agree on what the backspace key 3904# should send. 3905xterm+kbs|fragment for backspace key, 3906 kbs=^H, 3907# 3908# This fragment describes as much of XFree86 xterm's "pc-style" function 3909# keys as will fit into terminfo's 60 function keys. 3910# From ctlseqs.ms: 3911# Code Modifiers 3912# --------------------------------- 3913# 2 Shift 3914# 3 Alt 3915# 4 Shift + Alt 3916# 5 Control 3917# 6 Shift + Control 3918# 7 Alt + Control 3919# 8 Shift + Alt + Control 3920# --------------------------------- 3921# The meta key may also be used as a modifier in this scheme, adding another 3922# bit to the parameter. 3923xterm+pcfkeys|fragment for PC-style fkeys, 3924 use=xterm+app, use=xterm+pcf2, use=xterm+pcc2, 3925 use=xterm+pce2, 3926# 3927xterm+noapp|fragment with cursor keys in normal mode, 3928 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, 3929 khome=\E[H, 3930 3931xterm+app|fragment with cursor keys in application mode, 3932 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\EOF, 3933 khome=\EOH, 3934# 3935# The "PC-style" modifier scheme was introduced in xterm patch #94 (1999/3/27) 3936# and revised in patch #167 (2002/8/24). Some other terminal emulators copied 3937# the earlier scheme, as noted in the "use=" clauses in this file. 3938# 3939# The original assignments from patch #94 for cursor-keys had some technical 3940# issues: 3941# 3942# A parameter for a function-key to represent a modifier is just more 3943# bits. But for a cursor-key it may change the behavior of the 3944# application. For instance, emacs decodes the first parameter of a 3945# cursor-key as a repeat count. 3946# 3947# A parameterized string should (really) not begin with SS3 (\EO). 3948# Rather, CSI (\E[) should be used. 3949# 3950# For these reasons, the original assignments were deprecated. For 3951# compatibility reasons, they are still available as a setting of xterm's 3952# modifyCursorKeys resource. These fragments list the modified cursor-keys 3953# that might apply to xterm+pcfkeys with different values of that resource. 3954xterm+pcc3|fragment with modifyCursorKeys:3, 3955 kLFT=\E[>1;2D, kRIT=\E[>1;2C, kind=\E[>1;2B, 3956 kri=\E[>1;2A, kDN=\E[>1;2B, kDN3=\E[>1;3B, kDN4=\E[>1;4B, 3957 kDN5=\E[>1;5B, kDN6=\E[>1;6B, kDN7=\E[>1;7B, 3958 kLFT3=\E[>1;3D, kLFT4=\E[>1;4D, kLFT5=\E[>1;5D, 3959 kLFT6=\E[>1;6D, kLFT7=\E[>1;7D, kRIT3=\E[>1;3C, 3960 kRIT4=\E[>1;4C, kRIT5=\E[>1;5C, kRIT6=\E[>1;6C, 3961 kRIT7=\E[>1;7C, kUP=\E[>1;2A, kUP3=\E[>1;3A, 3962 kUP4=\E[>1;4A, kUP5=\E[>1;5A, kUP6=\E[>1;6A, 3963 kUP7=\E[>1;7A, 3964 3965xterm+pcc2|fragment with modifyCursorKeys:2, 3966 kLFT=\E[1;2D, kRIT=\E[1;2C, kind=\E[1;2B, kri=\E[1;2A, 3967 kDN=\E[1;2B, kDN3=\E[1;3B, kDN4=\E[1;4B, kDN5=\E[1;5B, 3968 kDN6=\E[1;6B, kDN7=\E[1;7B, kLFT3=\E[1;3D, kLFT4=\E[1;4D, 3969 kLFT5=\E[1;5D, kLFT6=\E[1;6D, kLFT7=\E[1;7D, 3970 kRIT3=\E[1;3C, kRIT4=\E[1;4C, kRIT5=\E[1;5C, 3971 kRIT6=\E[1;6C, kRIT7=\E[1;7C, kUP=\E[1;2A, kUP3=\E[1;3A, 3972 kUP4=\E[1;4A, kUP5=\E[1;5A, kUP6=\E[1;6A, kUP7=\E[1;7A, 3973 3974xterm+pcc1|fragment with modifyCursorKeys:1, 3975 kLFT=\E[2D, kRIT=\E[2C, kind=\E[2B, kri=\E[2A, kDN=\E[2B, 3976 kDN3=\E[3B, kDN4=\E[4B, kDN5=\E[5B, kDN6=\E[6B, kDN7=\E[7B, 3977 kLFT3=\E[3D, kLFT4=\E[4D, kLFT5=\E[5D, kLFT6=\E[6D, 3978 kLFT7=\E[7D, kRIT3=\E[3C, kRIT4=\E[4C, kRIT5=\E[5C, 3979 kRIT6=\E[6C, kRIT7=\E[7C, kUP=\E[2A, kUP3=\E[3A, 3980 kUP4=\E[4A, kUP5=\E[5A, kUP6=\E[6A, kUP7=\E[7A, 3981 3982xterm+pcc0|fragment with modifyCursorKeys:0, 3983 kLFT=\EO2D, kRIT=\EO2C, kind=\EO2B, kri=\EO2A, kDN=\EO2B, 3984 kDN3=\EO3B, kDN4=\EO4B, kDN5=\EO5B, kDN6=\EO6B, kDN7=\EO7B, 3985 kLFT3=\EO3D, kLFT4=\EO4D, kLFT5=\EO5D, kLFT6=\EO6D, 3986 kLFT7=\EO7D, kRIT3=\EO3C, kRIT4=\EO4C, kRIT5=\EO5C, 3987 kRIT6=\EO6C, kRIT7=\EO7C, kUP=\EO2A, kUP3=\EO3A, 3988 kUP4=\EO4A, kUP5=\EO5A, kUP6=\EO6A, kUP7=\EO7A, 3989 3990# 3991# Here are corresponding fragments from xterm patch #216: 3992# 3993xterm+pcf0|fragment with modifyFunctionKeys:0, 3994 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 3995 kf13=\EO2P, kf14=\EO2Q, kf15=\EO2R, kf16=\EO2S, 3996 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 3997 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 3998 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\EO5P, kf26=\EO5Q, 3999 kf27=\EO5R, kf28=\EO5S, kf29=\E[15;5~, kf3=\EOR, 4000 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 4001 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 4002 kf36=\E[24;5~, kf37=\EO6P, kf38=\EO6Q, kf39=\EO6R, 4003 kf4=\EOS, kf40=\EO6S, kf41=\E[15;6~, kf42=\E[17;6~, 4004 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 4005 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, kf49=\EO3P, 4006 kf5=\E[15~, kf50=\EO3Q, kf51=\EO3R, kf52=\EO3S, 4007 kf53=\E[15;3~, kf54=\E[17;3~, kf55=\E[18;3~, 4008 kf56=\E[19;3~, kf57=\E[20;3~, kf58=\E[21;3~, 4009 kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, kf61=\EO4P, 4010 kf62=\EO4Q, kf63=\EO4R, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4011# 4012xterm+pcf2|fragment with modifyFunctionKeys:2, 4013 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 4014 kf13=\E[1;2P, kf14=\E[1;2Q, kf15=\E[1;2R, kf16=\E[1;2S, 4015 kf17=\E[15;2~, kf18=\E[17;2~, kf19=\E[18;2~, kf2=\EOQ, 4016 kf20=\E[19;2~, kf21=\E[20;2~, kf22=\E[21;2~, 4017 kf23=\E[23;2~, kf24=\E[24;2~, kf25=\E[1;5P, kf26=\E[1;5Q, 4018 kf27=\E[1;5R, kf28=\E[1;5S, kf29=\E[15;5~, kf3=\EOR, 4019 kf30=\E[17;5~, kf31=\E[18;5~, kf32=\E[19;5~, 4020 kf33=\E[20;5~, kf34=\E[21;5~, kf35=\E[23;5~, 4021 kf36=\E[24;5~, kf37=\E[1;6P, kf38=\E[1;6Q, kf39=\E[1;6R, 4022 kf4=\EOS, kf40=\E[1;6S, kf41=\E[15;6~, kf42=\E[17;6~, 4023 kf43=\E[18;6~, kf44=\E[19;6~, kf45=\E[20;6~, 4024 kf46=\E[21;6~, kf47=\E[23;6~, kf48=\E[24;6~, 4025 kf49=\E[1;3P, kf5=\E[15~, kf50=\E[1;3Q, kf51=\E[1;3R, 4026 kf52=\E[1;3S, kf53=\E[15;3~, kf54=\E[17;3~, 4027 kf55=\E[18;3~, kf56=\E[19;3~, kf57=\E[20;3~, 4028 kf58=\E[21;3~, kf59=\E[23;3~, kf6=\E[17~, kf60=\E[24;3~, 4029 kf61=\E[1;4P, kf62=\E[1;4Q, kf63=\E[1;4R, kf7=\E[18~, 4030 kf8=\E[19~, kf9=\E[20~, 4031# 4032# Chunks from xterm #230: 4033xterm+pce2|fragment with modifyCursorKeys:2, 4034 kDC=\E[3;2~, kEND=\E[1;2F, kHOM=\E[1;2H, kIC=\E[2;2~, 4035 kNXT=\E[6;2~, kPRV=\E[5;2~, kich1=\E[2~, knp=\E[6~, 4036 kpp=\E[5~, kDC3=\E[3;3~, kDC4=\E[3;4~, kDC5=\E[3;5~, 4037 kDC6=\E[3;6~, kDC7=\E[3;7~, kEND3=\E[1;3F, kEND4=\E[1;4F, 4038 kEND5=\E[1;5F, kEND6=\E[1;6F, kEND7=\E[1;7F, 4039 kHOM3=\E[1;3H, kHOM4=\E[1;4H, kHOM5=\E[1;5H, 4040 kHOM6=\E[1;6H, kHOM7=\E[1;7H, kIC3=\E[2;3~, kIC4=\E[2;4~, 4041 kIC5=\E[2;5~, kIC6=\E[2;6~, kIC7=\E[2;7~, kNXT3=\E[6;3~, 4042 kNXT4=\E[6;4~, kNXT5=\E[6;5~, kNXT6=\E[6;6~, 4043 kNXT7=\E[6;7~, kPRV3=\E[5;3~, kPRV4=\E[5;4~, 4044 kPRV5=\E[5;5~, kPRV6=\E[5;6~, kPRV7=\E[5;7~, 4045 use=xterm+edit, 4046 4047xterm+edit|fragment for 6-key editing-keypad, 4048 kdch1=\E[3~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 4049 use=xterm+pc+edit, 4050 4051xterm+pc+edit|fragment for pc-style editing keypad, 4052 kend=\E[4~, khome=\E[1~, 4053 4054xterm+vt+edit|fragment for vt220-style editing keypad, 4055 kfnd=\E[1~, kslt=\E[4~, 4056 4057# 4058# Those chunks use the new-style (the xterm oldFunctionKeys resource is false). 4059# Alternatively, the same scheme with old-style function keys as in xterm-r6 4060# is shown here (because that is used in mrxvt and mlterm): 4061xterm+r6f2|xterm with oldFunctionKeys and modifyFunctionKeys:2, 4062 kf1=\E[11~, kf13=\E[11;2~, kf14=\E[12;2~, kf15=\E[13;2~, 4063 kf16=\E[14;2~, kf2=\E[12~, kf25=\E[11;5~, kf26=\E[12;5~, 4064 kf27=\E[13;5~, kf28=\E[14;5~, kf3=\E[13~, kf37=\E[11;6~, 4065 kf38=\E[12;6~, kf39=\E[13;6~, kf4=\E[14~, kf40=\E[14;6~, 4066 kf49=\E[11;3~, kf50=\E[12;3~, kf51=\E[13;3~, 4067 kf52=\E[14;3~, kf61=\E[11;4~, kf62=\E[12;4~, 4068 kf63=\E[13;4~, use=xterm+pcf2, 4069# 4070# This chunk is used for building the VT220/Sun/PC keyboard variants. 4071xterm-basic|modern xterm terminal emulator - common, 4072 OTbs, am, bce, km, mir, msgr, xenl, AX, XT, 4073 colors#8, cols#80, it#8, lines#24, pairs#64, 4074 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4075 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 4076 clear=\E[H\E[2J, cnorm=\E[?12l\E[?25h, cr=^M, 4077 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4078 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4079 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4080 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 4081 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 4082 flash=\E[?5h$<100/>\E[?5l, home=\E[H, hpa=\E[%i%p1%dG, 4083 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 4084 ind=^J, invis=\E[8m, is2=\E[!p\E[?3;4l\E[4l\E>, 4085 kmous=\E[M, meml=\El, memu=\Em, op=\E[39;49m, rc=\E8, 4086 rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, 4087 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, 4088 rmm=\E[?1034l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, 4089 rs2=\E[!p\E[?3;4l\E[4l\E>, sc=\E7, setab=\E[4%p1%dm, 4090 setaf=\E[3%p1%dm, 4091 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 4092 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 4093 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m, 4094 sgr0=\E(B\E[m, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, 4095 smir=\E[4h, smkx=\E[?1h\E=, smm=\E[?1034h, smso=\E[7m, 4096 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, E3=\E[3;J, 4097 use=ansi+pp, use=xterm+kbs, use=vt100+enq, 4098 4099# From: David J. MacKenzie <djm@va.pubnix.com>, 14 Nov 1997 4100# In retrospect, something like xterm-r6 was intended here -TD 4101xterm-xi|xterm on XI Graphics Accelerated X under BSD/OS 3.1, 4102 rmso=\E[m, rmul=\E[m, use=xterm-xf86-v33, 4103 4104# 16-colors is one of the variants of XFree86 3.3 xterm, updated for 4.0 (T.Dickey) 4105# If configured to support 88- or 256-colors (which is fairly common in 2009), 4106# xterm also recognizes the control sequences for initc -TD 4107xterm-16color|xterm with 16 colors like aixterm, 4108 ccc, 4109 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 4110 use=ibm+16color, use=xterm-new, 4111 4112# 256-colors is a compile-time feature of XFree86 xterm beginning with 4113# patch #111 (1999/7/10) -TD 4114xterm+256color|xterm 256-color feature, 4115 ccc, 4116 colors#256, pairs#32767, 4117 initc=\E]4;%p1%d;rgb\:%p2%{255}%*%{1000}%/%2.2X/%p3%{255}%*%{1000}%/%2.2X/%p4%{255}%*%{1000}%/%2.2X\E\\, 4118 setab=\E[%?%p1%{8}%<%t4%p1%d%e%p1%{16}%<%t10%p1%{8}%-%d%e48;5;%p1%d%;m, 4119 setaf=\E[%?%p1%{8}%<%t3%p1%d%e%p1%{16}%<%t9%p1%{8}%-%d%e38;5;%p1%d%;m, 4120 setb@, setf@, 4121 4122# 88-colors is a compile-time feature of XFree86 xterm beginning with 4123# patch #115 (1999/9/18) -TD 4124# 4125# Note that the escape sequences used are the same as for 256-colors - xterm 4126# has a different table of default color resource values. If built for 4127# 256-colors, it can still handle an 88-color palette by using the initc 4128# capability. 4129# 4130# At this time (2007/7/14), except for rxvt 2.7.x, none of the other terminals 4131# which support the xterm+256color feature support the associated initc 4132# capability. So it is cancelled in the entries which use this and/or the 4133# xterm+256color block. 4134# 4135# The default color palette for the 256- and 88-colors are different. A 4136# given executable will have one palette (perhaps compiled-in). If the program 4137# supports xterm's control sequence, it can be programmed using initc. 4138xterm+88color|xterm 88-color feature, 4139 colors#88, pairs#7744, use=xterm+256color, 4140 4141# These variants of XFree86 3.9.16 xterm are built as a configure option. 4142xterm-256color|xterm with 256 colors, 4143 use=xterm+256color, use=xterm-new, 4144xterm-88color|xterm with 88 colors, 4145 use=xterm+88color, use=xterm-256color, 4146 4147# These two are used to demonstrate the any-event mouse support, i.e., by 4148# using an extended name "XM" which tells ncurses to put the terminal into 4149# a special mode when initializing the xterm mouse. 4150xterm+sm+1002|testing xterm-mouse, 4151 XM=\E[?1002%?%p1%{1}%=%th%el%;, use=xterm-new, 4152xterm+sm+1003|testing xterm-mouse, 4153 XM=\E[?1003%?%p1%{1}%=%th%el%;, use=xterm-new, 4154 4155xterm-1002|testing xterm-mouse, 4156 use=xterm+sm+1002, use=xterm-new, 4157xterm-1003|testing xterm-mouse, 4158 use=xterm+sm+1003, use=xterm-new, 4159 4160# This chunk is based on suggestions by Ailin Nemui and Nicholas Marriott, who 4161# asked for some of xterm's advanced features to be added to its terminfo 4162# entry. It defines extended capabilities not found in standard terminfo or 4163# termcap. These are useful in tmux, for instance, hence the name. 4164# 4165# One caveat in adding extended capabilities in ncurses is that if the names 4166# are longer than two characters, then they will not be visible through the 4167# termcap interface. 4168# 4169# Ms modifies the selection/clipboard. Its parameters are 4170# p1 = the storage unit (clipboard, selection or cut buffer) 4171# p2 = the base64-encoded clipboard content. 4172# 4173# Ss is used to set the cursor style as described by the DECSCUSR 4174# function to a block or underline. 4175# Se resets the cursor style to the terminal power-on default. 4176# 4177# Cs and Cr set and reset the cursor colour. 4178xterm+tmux|advanced xterm features used in tmux, 4179 Cr=\E]112\007, Cs=\E]12;%p1%s\007, 4180 Ms=\E]52;%p1%s;%p2%s\007, Se=\E[2 q, Ss=\E[%p1%d q, 4181 4182# This is another variant, for XFree86 4.0 xterm (T.Dickey) 4183# This is an 8-bit version of xterm, which emulates DEC vt220 with ANSI color. 4184# To use it, your decTerminalID resource must be set to 200 or above. 4185# 4186# HTS \E H \210 4187# RI \E M \215 4188# SS3 \E O \217 4189# CSI \E [ \233 4190# 4191xterm-8bit|xterm terminal emulator 8-bit controls (X Window System), 4192 OTbs, am, bce, km, mc5i, mir, msgr, npc, xenl, AX, 4193 colors#8, cols#80, it#8, lines#24, pairs#64, 4194 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4195 bel=^G, blink=\2335m, bold=\2331m, cbt=\233Z, 4196 civis=\233?25l, clear=\233H\2332J, 4197 cnorm=\233?25l\233?25h, cr=^M, csr=\233%i%p1%d;%p2%dr, 4198 cub=\233%p1%dD, cub1=^H, cud=\233%p1%dB, cud1=^J, 4199 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 4200 cuu=\233%p1%dA, cuu1=\233A, cvvis=\233?12;25h, 4201 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 4202 ech=\233%p1%dX, ed=\233J, el=\233K, el1=\2331K, 4203 flash=\233?5h$<100/>\233?5l, home=\233H, 4204 hpa=\233%i%p1%dG, ht=^I, hts=\210, ich=\233%p1%d@, 4205 il=\233%p1%dL, il1=\233L, ind=^J, invis=\2338m, 4206 is2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, 4207 ka1=\217w, ka3=\217u, kb2=\217y, kbeg=\217E, kc1=\217q, 4208 kc3=\217s, kcbt=\233Z, kcub1=\217D, kcud1=\217B, 4209 kcuf1=\217C, kcuu1=\217A, kdch1=\2333~, kend=\2334~, 4210 kent=\217M, kf1=\23311~, kf10=\23321~, kf11=\23323~, 4211 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 4212 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 4213 kf2=\23312~, kf20=\23334~, kf3=\23313~, kf4=\23314~, 4214 kf5=\23315~, kf6=\23317~, kf7=\23318~, kf8=\23319~, 4215 kf9=\23320~, khome=\2331~, kich1=\2332~, kmous=\233M, 4216 knp=\2336~, kpp=\2335~, mc0=\233i, mc4=\2334i, mc5=\2335i, 4217 meml=\El, memu=\Em, op=\23339;49m, rc=\E8, rev=\2337m, 4218 ri=\215, rmacs=\E(B, rmam=\233?7l, rmcup=\233?1049l, 4219 rmir=\2334l, rmkx=\233?1l\E>, rmso=\23327m, rmul=\23324m, 4220 rs1=\Ec, 4221 rs2=\E[62"p\E G\233m\233?7h\E>\E7\233?1;3;4;6l\2334l\233r\E8, 4222 sc=\E7, setab=\2334%p1%dm, setaf=\2333%p1%dm, 4223 setb=\2334%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 4224 setf=\2333%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 4225 sgr=\2330%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 4226 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, 4227 smcup=\233?1049h, smir=\2334h, smkx=\233?1h\E=, 4228 smso=\2337m, smul=\2334m, tbc=\2333g, u6=\233[%i%d;%dR, 4229 u7=\E[6n, u8=\233[?1;2c, u9=\E[c, vpa=\233%i%p1%dd, 4230 use=xterm+kbs, 4231 4232xterm-hp|xterm with hpterm function keys, 4233 kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 4234 kdch1=\EP, kend=\EF, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, 4235 kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, kich1=\EQ, 4236 knp=\ES, kpp=\ET, use=xterm-basic, 4237 4238xterm-sco|xterm with SCO function keys, 4239 kbeg=\E[E, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 4240 kdch1=\177, kend=\E[F, kf1=\E[M, kf10=\E[V, kf11=\E[W, 4241 kf12=\E[X, kf13=\E[Y, kf14=\E[Z, kf15=\E[a, kf16=\E[b, 4242 kf17=\E[c, kf18=\E[d, kf19=\E[e, kf2=\E[N, kf20=\E[f, 4243 kf21=\E[g, kf22=\E[h, kf23=\E[i, kf24=\E[j, kf25=\E[k, 4244 kf26=\E[l, kf27=\E[m, kf28=\E[n, kf29=\E[o, kf3=\E[O, 4245 kf30=\E[p, kf31=\E[q, kf32=\E[r, kf33=\E[s, kf34=\E[t, 4246 kf35=\E[u, kf36=\E[v, kf37=\E[w, kf38=\E[x, kf39=\E[y, 4247 kf4=\E[P, kf40=\E[z, kf41=\E[@, kf42=\E[[, kf43=\E[\\, 4248 kf44=\E[], kf45=\E[\^, kf46=\E[_, kf47=\E[`, kf48=\E[{, 4249 kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, kf9=\E[U, khome=\E[H, 4250 kich1=\E[L, kmous=\E[>M, knp=\E[G, kpp=\E[I, 4251 use=xterm-basic, 4252 4253# The xterm-new description has all of the features, but is not completely 4254# compatible with vt220. If you are using a Sun or PC keyboard, set the 4255# sunKeyboard resource to true: 4256# + maps the editing keypad 4257# + interprets control-function-key as a second array of keys, so a 4258# 12-fkey keyboard can support vt220's 20-fkeys. 4259# + maps numeric keypad "+" to ",". 4260# + uses DEC-style control sequences for the application keypad. 4261# 4262xterm-vt220|xterm emulating vt220, 4263 kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 4264 kend=\E[4~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 4265 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 4266 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 4267 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4268 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 4269 use=xterm+app, use=xterm+edit, use=xterm-basic, 4270 use=vt220+keypad, 4271 4272xterm-vt52|xterm emulating dec vt52, 4273 cols#80, it#8, lines#24, 4274 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4275 bel=^G, clear=\EH\EJ, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, 4276 cup=\EY%p1%' '%+%c%p2%' '%+%c, cuu1=\EA, ed=\EJ, el=\EK, 4277 home=\EH, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 4278 kcuu1=\EA, nel=^M^J, ri=\EI, rmacs=\EG, smacs=\EF, 4279 use=xterm+kbs, 4280 4281xterm-noapp|xterm with cursor keys in normal mode, 4282 rmcup@, rmkx=\E>, smcup@, smkx=\E=, use=xterm+noapp, 4283 use=xterm, 4284 4285xterm-24|vs100|xterms|xterm terminal emulator (X Window System), 4286 lines#24, use=xterm-old, 4287 4288# This is xterm for ncurses. 4289xterm|xterm terminal emulator (X Window System), 4290 use=xterm-new, 4291 4292# This entry assumes that xterm's handling of VT100 SI/SO is disabled by 4293# setting the vt100Graphics resource to false. 4294xterm-utf8|xterm with no VT100 line-drawing in UTF-8 mode, 4295 U8#1, use=xterm, 4296 4297# These building-blocks allow access to the X titlebar and icon name as a 4298# status line. There are a few problems in using them in entries: 4299# 4300# a) tsl should have a parameter to denote the column on which to transfer to 4301# the status line. 4302# b) the "0" code for xterm updates both icon-title and window title. Some 4303# window managers such as twm (and possibly window managers descended from 4304# it such as tvtwm, ctwm, and vtwm) track windows by icon-name. Thus, you 4305# don't want to mess with icon-name when using those window managers. 4306# 4307# The extension "TS" is preferable, because it does not accept a parameter. 4308# However, if you are using a non-extended terminfo, "TS" is not visible. 4309xterm+sl|access X title line and icon name, 4310 hs, 4311 dsl=\E]0;\007, fsl=^G, tsl=\E]0;, TS=\E]0;, 4312xterm+sl-twm|access X title line (pacify twm-descended window managers), 4313 hs, 4314 dsl=\E]2;\007, fsl=^G, tsl=\E]2;, TS=\E]2;, 4315 4316# In contrast, this block can be used for a DEC vt320 and up. There are two 4317# controls used. 4318# 4319# DECSASD (select active status display) 4320# \E[0$} Main display 4321# \E[1$} Status line 4322# 4323# DECSSDT (select status line type) 4324# \E[0$~ No status line 4325# \E[1$~ Indicator status line 4326# \E[2$~ Host-writable status line 4327# 4328# The building block assumes that the terminal always shows something at the 4329# status line (either the indicator, or status line). That is because if no 4330# status line is used, then the terminal makes that line part of the user 4331# window, changing its size without notice. 4332# 4333# Because there is no "esl" (enable status line) capability, the "tsl" 4334# capability ensures that the status line is host-writable. A DEC terminal 4335# will clear the status line when changing from indicator to host-writable 4336# mode. 4337# 4338# Once on the status line, the row part of cursor addressing is ignored. Since 4339# tsl expects a parameter (to specify the column), the shortest addressing that 4340# can be used for this purpose is HPA, e.g., \E[5d to go to column 5. 4341# 4342dec+sl|DEC VTxx status line, 4343 eslok, hs, 4344 dsl=\E[1$~, fsl=\E[0$}, tsl=\E[2$~\E[1$}\E[%i%p1%d`, 4345 4346# 4347# The following xterm variants don't depend on your base version 4348# 4349# xterm with bold instead of underline 4350xterm-bold|xterm terminal emulator (X11R6 Window System) standout w/bold, 4351 sgr=%?%p9%t\016%e\017%;B\E[0%?%p6%t;1%;%?%p2%t;1%;%?%p1%p3%|%t;7%;m, 4352 smso=\E[7m, smul=\E[1m, use=xterm-old, 4353 4354# See the note on ICH/ICH1 VERSUS RMIR/SMIR near the end of file 4355xterm-nic|xterm with ich/ich1 suppressed for non-curses programs, 4356 ich@, ich1@, use=xterm, 4357# From: Mark Sheppard <kimble@mistral.co.uk>, 4 May 1996 4358xterm1|xterm terminal emulator ignoring the alternate screen buffer, 4359 rmcup@, smcup@, use=xterm, 4360 4361#### KTERM 4362# (kterm: this had extension capabilities ":KJ:TY=ascii:" -- esr) 4363# (kterm should not invoke DEC Graphics as the alternate character set 4364# -- Kenji Rikitake) 4365# (proper setting of enacs, smacs, rmacs makes kterm to use DEC Graphics 4366# -- MATSUMOTO Shoji) 4367# kterm implements acsc via built-in table of X Drawable's 4368kterm|kterm kanji terminal emulator (X window system), 4369 eslok, hs, XT, 4370 ncv@, 4371 acsc=``aajjkkllmmnnooppqqrrssttuuvvwwxx~~, 4372 csr=\E[%i%p1%d;%p2%dr, dsl=\E[?H, enacs=, fsl=\E[?F, 4373 kmous=\E[M, rc=\E8, rmacs=\E(B, rmam=\E[?7l, sc=\E7, 4374 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 4375 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, 4376 tsl=\E[?E\E[?%i%p1%dT, use=xterm-r6, use=ecma+color, 4377kterm-color|kterm-co|kterm with ANSI colors, 4378 ncv@, use=kterm, use=ecma+color, 4379 4380#### Other XTERM 4381# These (xtermc and xtermm) are distributed with Solaris. They refer to a 4382# variant of xterm which is apparently no longer supported, but are interesting 4383# because they illustrate SVr4 curses mouse controls - T.Dickey 4384xtermm|xterm terminal emulator (monocrome), 4385 OTbs, am, km, mir, msgr, xenl, 4386 btns#3, cols#80, it#8, lines#24, 4387 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4388 bel=^G, blink@, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 4389 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 4390 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4391 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4392 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4393 el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, getm=\E[%p1%dY, 4394 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, 4395 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, 4396 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[Y, kf0=\EOy, 4397 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf5=\EOT, kf6=\EOU, 4398 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kmous=\E[^_, 4399 knp=\E[U, kpp=\E[V, rc=\E8, reqmp=\E[492Z, rev=\E[7m, ri=\EM, 4400 rmacs=^O, rmcup=\E@0\E[?4r, rmso=\E[m, 4401 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 4402 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 4403 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4404 sgr0=\E[m\017, smacs=^N, smcup=\E@0\E[?4s\E[?4h\E@1, 4405 smso=\E[7m, tbc=\E[3g, use=vt100+fnkeys, 4406 4407xtermc|xterm terminal emulator (color), 4408 colors#8, ncv#7, pairs#64, 4409 op=\E[100m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4410 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 4411 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 4412 use=xtermm, 4413 4414# From: David J. MacKenzie <djm@va.pubnix.com> 20 Apr 1995 4415# Here's a termcap entry I've been using for xterm_color, which comes 4416# with BSD/OS 2.0, and the X11R6 contrib tape too I think. Besides the 4417# color stuff, I also have a status line defined as the window manager 4418# title bar. [I have translated it to terminfo -- ESR] 4419xterm-pcolor|xterm with color used for highlights and status line, 4420 wsl#40, 4421 bold=\E[1;43m, rev=\E[7;34m, 4422 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1;43%;%?%p2%t;4;42%;%?%p1%t;7;31%;%?%p3%t;7;34%;%?%p4%t;5%;%?%p7%t;8%;m, 4423 smso=\E[7;31m, smul=\E[4;42m, use=xterm+sl, use=xterm-r6, 4424 4425# This describes the capabilities of color_xterm, an xterm variant from 4426# before ECMA-64 color support was folded into the main-line xterm release. 4427# This entry is straight from color_xterm's maintainer. 4428# From: Jacob Mandelson <jlm@ugcs.caltech.edu>, 09 Nov 1996 4429# The README's with the distribution also say that it supports SGR 21, 24, 25 4430# and 27, but they are not present in the terminfo or termcap. 4431color_xterm|cx|cx100|color_xterm color terminal emulator for X, 4432 OTbs, am, km, mir, msgr, xenl, XT, 4433 cols#80, it#8, lines#65, ncv@, 4434 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4435 bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 4436 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4437 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4438 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4439 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 4440 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, home=\E[H, ht=^I, 4441 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 4442 is1=\E[r\E[m\E[?7h\E[?4;6l\E[4l, kbs=^H, kcub1=\EOD, 4443 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kend=\E[8~, kf1=\E[11~, 4444 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf2=\E[12~, 4445 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 4446 kf8=\E[19~, kf9=\E[20~, khome=\E[7~, kich1=\E[2~, 4447 kmous=\E[M, knp=\E[6~, kpp=\E[5~, rc=\E8, rev=\E[7m, ri=\EM, 4448 rmacs=^O, rmam=\E[?7l, rmcup=\E>\E[?41;1r, rmir=\E[4l, 4449 rmso=\E[27m, rmul=\E[24m, 4450 rs1=\E(B\017\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E<, 4451 sc=\E7, 4452 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4453 sgr0=\E[0m\017, smacs=^N, smam=\E[?7h, 4454 smcup=\E[?1;41s\E[?1;41h\E=, smir=\E[4h, smso=\E[7m, 4455 smul=\E[4m, use=ecma+color, use=vt220+keypad, 4456 4457# The 'nxterm' distributed with Redhat Linux 5.2 is a slight rehack of 4458# xterm-sb_right-ansi-3d, which implements ANSI colors, but does not support 4459# SGR 39 or 49. SGR 0 does reset colors (along with everything else). This 4460# description is "compatible" with color_xterm, rxvt and XFree86 xterm, except 4461# that each of those implements the home, end, delete keys differently. 4462# 4463# Redhat Linux 6.x distributes XFree86 xterm as "nxterm", which uses bce 4464# colors; note that this is not compatible with the 5.2 version. 4465# csw (2002-05-15): make xterm-color primary instead of nxterm, to 4466# match XFree86's xterm.terminfo usage and prevent circular links 4467xterm-color|nxterm|generic color xterm, 4468 ncv@, 4469 op=\E[m, use=xterm-r6, use=klone+color, 4470 4471# This entry describes an xterm with Sun-style function keys enabled 4472# via the X resource setting "xterm*sunFunctionKeys:true" 4473# To understand <kf11>/<kf12> note that L1,L2 and F11,F12 are the same. 4474# The <kf13>...<kf20> keys are L3-L10. We don't set <kf16=\E[197z> 4475# because we want it to be seen as <kcpy>. 4476# The <kf31>...<kf45> keys are R1-R15. We treat some of these in accordance 4477# with their Sun keyboard labels instead. 4478# From: Simon J. Gerraty <sjg@zen.void.oz.au> 10 Jan 1996 4479xterm-sun|xterm with sunFunctionKeys true, 4480 kb2=\E[218z, kcpy=\E[197z, kcub1=\EOD, kcud1=\EOB, 4481 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3z, kend=\E[220z, 4482 kent=\EOM, kf1=\E[224z, kf10=\E[233z, kf11=\E[192z, 4483 kf12=\E[193z, kf13=\E[194z, kf14=\E[195z, kf15=\E[196z, 4484 kf17=\E[198z, kf18=\E[199z, kf19=\E[200z, kf2=\E[225z, 4485 kf20=\E[201z, kf3=\E[226z, kf31=\E[208z, kf32=\E[209z, 4486 kf33=\E[210z, kf34=\E[211z, kf35=\E[212z, kf36=\E[213z, 4487 kf38=\E[215z, kf4=\E[227z, kf40=\E[217z, kf42=\E[219z, 4488 kf44=\E[221z, kf45=\E[222z, kf46=\E[234z, kf47=\E[235z, 4489 kf5=\E[228z, kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, 4490 kf9=\E[232z, kfnd=\E[200z, khlp=\E[196z, khome=\E[214z, 4491 kich1=\E[2z, knp=\E[222z, kpp=\E[216z, kund=\E[195z, 4492 use=xterm-basic, 4493xterms-sun|small (80x24) xterm with sunFunctionKeys true, 4494 cols#80, lines#24, use=xterm-sun, 4495 4496#### GNOME (VTE) 4497# this describes the alpha-version of Gnome terminal shipped with Redhat 6.0 4498gnome-rh62|Gnome terminal, 4499 bce, 4500 kdch1=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 4501 use=xterm-color, 4502 4503# GNOME Terminal 1.4.0.4 (Redhat 7.2) 4504# 4505# This implements a subset of vt102 with a random selection of features from 4506# other terminals such as color and function-keys. 4507# 4508# shift-f1 to shift-f10 are f11 to f20 4509# 4510# NumLock changes the application keypad to approximate vt100 keypad, except 4511# that there is no escape sequence matching comma (,). 4512# 4513# Other defects observed: 4514# vt100 LNM mode is not implemented. 4515# vt100 80/132 column mode is not implemented. 4516# vt100 DECALN is not implemented. 4517# vt100 DECSCNM mode is not implemented, so flash does not work. 4518# vt100 TBC (tab reset) is not implemented. 4519# xterm alternate screen controls do not restore cursor position properly 4520# it hangs in tack after running function-keys test. 4521gnome-rh72|GNOME Terminal, 4522 bce, km@, 4523 civis=\E[?25l, cnorm=\E[?25h, kdch1=\E[3~, kf1=\EOP, 4524 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmam=\E[?7l, 4525 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\016%e\017%;, 4526 sgr0=\E[0m\017, smam=\E[?7h, tbc@, use=xterm-color, 4527 4528# GNOME Terminal 2.0.1 (Redhat 8.0) 4529# 4530# Documentation now claims it implements vt220 (which is demonstrably false). 4531# However, it does implement ECH, which is a vt220 feature. And there are 4532# workable vt100 LNM, DECALN, DECSNM modes, making it possible to display 4533# more of its bugs using vttest. 4534# 4535# However, note that bce and msgr are broken in this release. Tabs (tbc and 4536# hts) are broken as well. Sometimes flash (as in xterm-new) works. 4537# 4538# kf1 and kf10 are not tested since they're assigned (hardcoded?) to menu 4539# operations. Shift-tab generates a distinct sequence so it can be argued 4540# that it implements kcbt. 4541gnome-rh80|GNOME Terminal, 4542 bce@, msgr@, 4543 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, kbs=\177, 4544 kcbt=\E^I, op=\E[39;49m, use=gnome-rh72, 4545 4546# GNOME Terminal 2.2.1 (Redhat 9.0) 4547# 4548# bce and msgr are repaired. 4549gnome-rh90|GNOME Terminal, 4550 bce, msgr, XT, 4551 hpa=\E[%i%p1%dG, kDC=\E[3;2~, kLFT=\EO2D, kRIT=\EO2C, 4552 kb2=\E[E, kcbt=\E[Z, kend=\EOF, khome=\EOH, tbc=\E[3g, 4553 vpa=\E[%i%p1%dd, use=xterm+pcf0, use=xterm+pcfkeys, 4554 use=gnome-rh80, 4555 4556# GNOME Terminal 2.14.2 (Fedora Core 5) 4557# Ed Catmur notes that gnome-terminal has recognized soft-reset since May 2002. 4558gnome-fc5|GNOME Terminal, 4559 rs1=\Ec, 4560 rs2=\E7\E[r\E8\E[m\E[?7h\E[!p\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 4561 use=ansi+enq, use=xterm+pcc0, use=gnome-rh90, 4562 4563# GNOME Terminal 2.18.1 (2007 snapshot) 4564# 4565# For any "recent" version of gnome-terminal, it is futile to attempt to 4566# support modifiers on cursor- and keypad keys because the program usually 4567# is hardcoded to set $TERM to "xterm", and on startup, it builds a subset 4568# of the keys (which more/less correspond to the termcap values), and will 4569# interpret those according to the $TERM value, but others not in the 4570# terminfo according to some constantly changing set of hacker guidelines -TD 4571vte-2007|VTE in GNOME Terminal snapshot 2.18.1, 4572 use=xterm+pcc2, use=gnome-fc5, 4573gnome-2007|GNOME Terminal snapshot 2.18.1, 4574 use=vte-2007, 4575 4576# GNOME Terminal 2.22.3 (2008 snapshot) 4577# 4578# In vttest, it claims to be a vt220 with national replacement character-sets, 4579# but aside from the identifier string, implements only a small fraction of 4580# vt220's behavior, which will make it less usable on a VMS system (unclear 4581# what the intent of the developer is, since the NRC feature exposed in vttest 4582# by this change does not work). 4583vte-2008|VTE in GNOME Terminal snapshot 2.22.3, 4584 use=vte+pcfkeys, use=vte-2007, 4585gnome-2008|GNOME Terminal snapshot 2.22.3, 4586 use=vte-2008, 4587 4588# GNOME Terminal 3.6.0 (2012) 4589# VTE 0.34.1 was marked in git 2012-10-15 (three days after patch was applied 4590# in ncurses). It inherited from gnome-fc5, which broke the modified forms 4591# of f1-f4 -TD 4592# 4593# Testing with tack shows that flash does not/has not worked -TD 4594vte-2012|VTE 0.34.1, 4595 flash@, ritm=\E[23m, sitm=\E[3m, use=vte-2008, 4596# Version 3.6.1 sets TERM to xterm-256color (still hardcoded), which has 4597# 61 differences from a correct entry for gnome terminal. 4598gnome-2012|GNOME Terminal 3.6.0, 4599 use=vte-2012, 4600 4601# GNOME terminal may automatically use the contents of the "xterm" terminfo to 4602# supply key information which is not built into the program. With 2.22.3, 4603# this list is built into the program (which addresses the inadvertant use of 4604# random terminfo data, though using a set of values which does not correspond 4605# to any that xterm produces - still not solving the problem that GNOME 4606# terminal hardcodes the $TERM variable as "xterm"). 4607# 4608# terminfo modifier code keys 4609# kf13-kf24 shift 2 F1 to F12 4610# kf25-kf36 control 5 F1 to F12 4611# kf37-kf48 shift/control 6 F1 to F12 4612# kf49-kf60 alt 3 F1 to F12 4613# kf61-kf63 shift-alt 4 F1 to F3 4614# 4615# The parameters with \EO (SS3) are technically an error, since SS3 should have 4616# no parameters. This appears to be rote copying based on xterm+pcc0. 4617vte+pcfkeys|VTE's variation on xterm+pcfkeys, 4618 kf1=\EOP, kf13=\EO1;2P, kf14=\EO1;2Q, kf15=\EO1;2R, 4619 kf16=\EO1;2S, kf2=\EOQ, kf25=\EO1;5P, kf26=\EO1;5Q, 4620 kf27=\EO1;5R, kf28=\EO1;5S, kf3=\EOR, kf37=\EO1;6P, 4621 kf38=\EO1;6Q, kf39=\EO1;6R, kf4=\EOS, kf40=\EO1;6S, 4622 kf49=\EO1;3P, kf50=\EO1;3Q, kf51=\EO1;3R, kf52=\EO1;3S, 4623 kf61=\EO1;4P, kf62=\EO1;4Q, kf63=\EO1;4R, 4624 use=xterm+pcfkeys, 4625gnome+pcfkeys|VTE's variation on xterm+pcfkeys, 4626 use=vte+pcfkeys, 4627 4628vte|VTE aka GNOME Terminal, 4629 use=vte-2012, 4630gnome|GNOME Terminal, 4631 use=vte, 4632 4633# palette is hardcoded... 4634vte-256color|VTE with xterm 256-colors, 4635 use=xterm+256color, use=vte, 4636gnome-256color|GNOME Terminal with xterm 256-colors, 4637 use=vte-256color, 4638 4639# XFCE Terminal 0.2.5.4beta2 4640# 4641# This is based on some of the same source code, e.g., the VTE library, as 4642# gnome-terminal, but has fewer features, fails more screens in vttest. 4643# Since most of the terminfo-related behavior is due to the VTE library, 4644# the terminfo is the same as gnome-terminal. 4645xfce|Xfce Terminal, 4646 use=vte-2008, 4647 4648#### Other GNOME 4649# Multi-Gnome-Terminal 1.6.2 4650# 4651# This does not use VTE, and does have different behavior (compare xfce and 4652# gnome). 4653mgt|Multi GNOME Terminal, 4654 indn=\E[%p1%dS, rin=\E[%p1%dT, use=xterm-xf86-v333, 4655 4656#### KDE 4657# This is kvt 0-18.7, shipped with Redhat 6.0 (though whether it supports bce 4658# or not is debatable). 4659kvt|KDE terminal, 4660 bce, km@, 4661 kdch1=\177, kend=\E[F, khome=\E[H, use=xterm-color, 4662 4663# Konsole 1.0.1 4664# (formerly known as kvt) 4665# 4666# This program hardcodes $TERM to 'xterm', which is not accurate. However, to 4667# simplify this entry (and point out why konsole isn't xterm), we base this on 4668# xterm-r6. The default keyboard appears to be 'linux'. 4669# 4670# Notes: 4671# a) konsole implements several features from XFree86 xterm, though none of 4672# that is documented - except of course in its source code - apparently 4673# because its implementors are unaccustomed to reading documentation - as 4674# evidenced by the sparse and poorly edited documentation distributed with 4675# konsole. Some features such as the 1049 private mode are recognized but 4676# incorrectly implemented as a duplicate of the 47 private mode. 4677# b) even with the "vt100 (historical)" keyboard setting, the numeric keypad 4678# sends PC-style escapes rather than vt100. 4679# c) fails vttest menu 3 (Test of character sets) because it does not properly 4680# parse some control sequences. Also fails vttest Primary Device Attributes 4681# by sending a bogus code (in the source it says it's supposed to be a 4682# vt220, which is doubly incorrect because it does not implement vt220 4683# control sequences except for a few special cases). Treat it as a 4684# mildly-broken vt102. 4685# 4686# Update for konsole 1.3.2: 4687# The 1049 private mode works (but see the other xterm screens in vttest). 4688# Primary Device Attributes now returns the code for a vt100 with advanced 4689# video option. Perhaps that's intended to be a "mildly-broken vt102". 4690# 4691# Updated for konsole 1.6.4: 4692# add konsole-solaris 4693# 4694# Updated for konsole 1.6.6: 4695# add control-key modifiers for function-keys, etc. 4696# 4697# vttest menu 1 shows that both konsole and gnome terminal do wrapping 4698# different from xterm (and vt100's). They have the same behavior in this 4699# detail, but it is unclear which copies the other. 4700konsole-base|KDE console window, 4701 bce, km@, npc, XT, 4702 ncv@, 4703 bel@, blink=\E[5m, civis=\E[?25l, cnorm=\E[?25h, 4704 ech=\E[%p1%dX, flash=\E[?5h$<100/>\E[?5l, 4705 hpa=\E[%i%p1%dG, indn=\E[%p1%dS, kbs=\177, kdch1=\E[3~, 4706 kend=\E[4~, kf1@, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, 4707 kf17@, kf18@, kf19@, kf2@, kf20@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 4708 kf9@, kfnd@, khome=\E[1~, kslt@, rin=\E[%p1%dT, rmam=\E[?7l, 4709 rmso=\E[27m, rmul=\E[24m, 4710 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 4711 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4712 sgr0=\E[0m\017, smam=\E[?7h, vpa=\E[%i%p1%dd, 4713 use=ecma+color, use=xterm-r6, 4714konsole-linux|KDE console window with linux keyboard, 4715 kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13@, 4716 kf14@, kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E[[B, kf20@, 4717 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 4718 kf8=\E[19~, kf9=\E[20~, use=konsole-base, 4719konsole-solaris|KDE console window with Solaris keyboard, 4720 kbs=^H, kend=\E[4~, khome=\E[1~, use=konsole-vt100, 4721# KDE's "XFree86 3.x.x" keyboard is based on reading the xterm terminfo rather 4722# than testing the code. 4723konsole-xf3x|KDE console window with keyboard for XFree86 3.x xterm, 4724 kend=\E[4~, khome=\E[1~, use=konsole-vt100, 4725# The value for kbs reflects local customization rather than the settings used 4726# for XFree86 xterm. 4727konsole-xf4x|KDE console window with keyboard for XFree86 4.x xterm, 4728 kend=\EOF, khome=\EOH, use=konsole+pcfkeys, 4729 use=konsole-vt100, 4730# Konsole does not implement shifted cursor-keys. 4731konsole+pcfkeys|konsole subset of xterm+pcfkeys, 4732 kLFT@, kRIT@, kcbt=\E[Z, kind@, kri@, kDN@, kUP@, use=xterm+pcc2, 4733 use=xterm+pcf0, 4734# KDE's "vt100" keyboard has no relationship to any terminal that DEC made, but 4735# it is still useful for deriving the other entries. 4736konsole-vt100|KDE console window with vt100 (sic) keyboard, 4737 kbs=\177, kdch1=\E[3~, kend=\E[F, kf1=\E[11~, kf10=\E[21~, 4738 kf11=\E[23~, kf12=\E[24~, kf13@, kf14@, kf15@, kf16@, kf17@, 4739 kf18@, kf19@, kf2=\E[12~, kf20@, kf3=\E[13~, kf4=\E[14~, 4740 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4741 khome=\E[H, use=konsole-base, 4742konsole-vt420pc|KDE console window with vt420 pc keyboard, 4743 kbs=^H, kdch1=\177, use=konsole-vt100, 4744konsole-16color|klone of xterm-16color, 4745 ncv#32, use=ibm+16color, use=konsole, 4746# make a default entry for konsole 4747konsole|KDE console window, 4748 use=konsole-xf4x, 4749 4750# palette is hardcoded... 4751konsole-256color|KDE console window with xterm 256-colors, 4752 initc@, use=xterm+256color, use=konsole, 4753 4754#### MLTERM 4755# This is mlterm 2.9.3's mlterm.ti, with some additions/corrections -TD 4756# 4757# It is nominally a vt102 emulator, with features borrowed from rxvt and 4758# xterm. 4759# 4760# The function keys are numbered based on shift/control/alt modifiers, except 4761# that the control-modifier itself is used to spawn a new copy of mlterm (the 4762# "-P" option). So control/F1 to control/F12 may not be usable, depending on 4763# how it is configured. 4764# 4765# kf1 to kf12 \E[11~ to \E[24~ 4766# shift kf1 to kf12 \E[11;2~ to \E[24;2~ 4767# alt kf1 to kf12 \E[11;3~ to \E[24;3~ 4768# shift/alt kf1 to kf12 \E[11;4~ to \E[24;4~ 4769# control kf1 to kf12 \E[11;5~ to \E[24;5~ (maybe) 4770# control/shift kf1 to kf12 \E[11;6~ to \E[24;6~ 4771# control/alt kf1 to kf12 \E[11;7~ to \E[24;7~ 4772# control/shift/alt kf1 to kf12 \E[11;8~ to \E[24;8~ 4773# 4774mlterm|multi lingual terminal emulator, 4775 am, eslok, km, mc5i, mir, msgr, npc, xenl, XT, 4776 colors#8, cols#80, it#8, lines#24, pairs#64, 4777 acsc=00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4778 bel=^G, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 4779 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 4780 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4781 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4782 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4783 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 4784 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=, 4785 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 4786 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 4787 is2=\E7\E[r\E[m\E[?7h\E[?1;3;4;6l\E[4l\E8\E>, 4788 kbs=\177, kcbt=\E[Z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 4789 kcuu1=\EOA, kdch1=\E[3~, kend=\EOF, kent=\EOM, kfnd=\E[1~, 4790 khome=\EOH, kich1=\E[2~, kind=\EO1;2B, kmous=\E[M, 4791 knp=\E[6~, kpp=\E[5~, kri=\EO1;2A, kslt=\E[4~, mc0=\E[i, 4792 nel=\EE, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 4793 rin=\E[%p1%dT, rmacs=\E(B, rmam=\E[?7l, rmcup=\E[?1049l, 4794 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 4795 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l, 4796 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 4797 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 4798 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E[?1049h, 4799 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 4800 tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, u8=\E[?1;2c, u9=\E[c, 4801 vpa=\E[%i%p1%dd, use=mlterm+pcfkeys, use=xterm+r6f2, 4802 4803# The insert/delete/home/end keys do not respond to modifiers because mlterm 4804# looks in its termcap to decide which string to send. If it used terminfo 4805# (when available), it could use the extended names introduced for xterm. 4806mlterm+pcfkeys|fragment for PC-style fkeys, 4807 kLFT=\EO1;2D, kNXT=\E[6;2~, kPRV=\E[5;2~, kRIT=\EO1;2C, 4808 kDN=\EO1;2B, kDN3=\EO1;3B, kDN4=\EO1;4B, kDN5=\EO1;5B, 4809 kDN6=\EO1;6B, kDN7=\EO1;7B, kIC5=\E[2;5~, kIC6=\E[2;6~, 4810 kLFT3=\EO1;3D, kLFT4=\EO1;4D, kLFT5=\EO1;5D, 4811 kLFT6=\EO1;6D, kLFT7=\EO1;7D, kNXT5=\E[6;5~, 4812 kNXT6=\E[6;6~, kPRV5=\E[5;5~, kPRV6=\E[5;6~, 4813 kRIT3=\EO1;3C, kRIT4=\EO1;4C, kRIT5=\EO1;5C, 4814 kRIT6=\EO1;6C, kRIT7=\EO1;7C, kUP=\EO1;2A, kUP3=\EO1;3A, 4815 kUP4=\EO1;4A, kUP5=\EO1;5A, kUP6=\EO1;6A, kUP7=\EO1;7A, 4816 4817mlterm-256color|mlterm 3.0 with xterm 256-colors, 4818 use=xterm+256color, use=rxvt, 4819 4820#### RXVT 4821# From: Thomas Dickey <dickey@clark.net> 04 Oct 1997 4822# Updated: Oezguer Kesim <kesim@math.fu-berlin.de> 02 Nov 1997 4823# Notes: 4824# rxvt 2.21b uses 4825# smacs=\E(B\E)U^N, rmacs=\E(B\E)0^O, 4826# but some applications don't work with that. 4827# It also has an AIX extension 4828# box2=lqkxjmwuvtn, 4829# and 4830# ech=\E[%p1%dX, 4831# but the latter does not work correctly. 4832# 4833# The distributed terminfo says it implements hpa and vpa, but they are not 4834# implemented correctly, using relative rather than absolute positioning. 4835# 4836# rxvt is normally configured to look for "xterm" or "xterm-color" as $TERM. 4837# Since rxvt is not really compatible with xterm, it should be configured as 4838# "rxvt" or "rxvt-color". 4839# 4840# removed dch/dch1 because they are inconsistent with bce/ech -TD 4841# remove km as per tack test -TD 4842rxvt-basic|rxvt terminal base (X Window System), 4843 OTbs, am, bce, eo, mir, msgr, xenl, xon, XT, 4844 cols#80, it#8, lines#24, 4845 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 4846 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 4847 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 4848 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 4849 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 4850 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 4851 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 4852 enacs=\E(B\E)0, flash=\E[?5h\E[?5l, home=\E[H, ht=^I, 4853 hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 4854 ind=^J, is1=\E[?47l\E=\E[?1l, 4855 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, 4856 kcbt=\E[Z, kmous=\E[M, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 4857 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=\E>, rmso=\E[27m, 4858 rmul=\E[24m, 4859 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 4860 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 4861 s0ds=\E(B, s1ds=\E(0, sc=\E7, 4862 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 4863 sgr0=\E[0m\017, smacs=^N, smcup=\E7\E[?47h, smir=\E[4h, 4864 smkx=\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, use=vt100+enq, 4865 use=rxvt+pcfkeys, use=vt220+keypad, 4866# Key Codes from rxvt reference: 4867# 4868# Note: Shift + F1-F10 generates F11-F20 4869# 4870# For the keypad, use Shift to temporarily override Application-Keypad 4871# setting use Num_Lock to toggle Application-Keypad setting if Num_Lock 4872# is off, escape sequences toggle Application-Keypad setting. 4873# Also note that values of Home, End, Delete may have been compiled 4874# differently on your system. 4875# 4876# Normal Shift Control Ctrl+Shift 4877# Tab ^I ESC [ Z ^I ESC [ Z 4878# BackSpace ^H ^? ^? ^? 4879# Find ESC [ 1 ~ ESC [ 1 $ ESC [ 1 ^ ESC [ 1 @ 4880# Insert ESC [ 2 ~ paste ESC [ 2 ^ ESC [ 2 @ 4881# Execute ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ 4882# Select ESC [ 4 ~ ESC [ 4 $ ESC [ 4 ^ ESC [ 4 @ 4883# Prior ESC [ 5 ~ scroll-up ESC [ 5 ^ ESC [ 5 @ 4884# Next ESC [ 6 ~ scroll-down ESC [ 6 ^ ESC [ 6 @ 4885# Home ESC [ 7 ~ ESC [ 7 $ ESC [ 7 ^ ESC [ 7 @ 4886# End ESC [ 8 ~ ESC [ 8 $ ESC [ 8 ^ ESC [ 8 @ 4887# Delete ESC [ 3 ~ ESC [ 3 $ ESC [ 3 ^ ESC [ 3 @ 4888# F1 ESC [ 11 ~ ESC [ 23 ~ ESC [ 11 ^ ESC [ 23 ^ 4889# F2 ESC [ 12 ~ ESC [ 24 ~ ESC [ 12 ^ ESC [ 24 ^ 4890# F3 ESC [ 13 ~ ESC [ 25 ~ ESC [ 13 ^ ESC [ 25 ^ 4891# F4 ESC [ 14 ~ ESC [ 26 ~ ESC [ 14 ^ ESC [ 26 ^ 4892# F5 ESC [ 15 ~ ESC [ 28 ~ ESC [ 15 ^ ESC [ 28 ^ 4893# F6 ESC [ 17 ~ ESC [ 29 ~ ESC [ 17 ^ ESC [ 29 ^ 4894# F7 ESC [ 18 ~ ESC [ 31 ~ ESC [ 18 ^ ESC [ 31 ^ 4895# F8 ESC [ 19 ~ ESC [ 32 ~ ESC [ 19 ^ ESC [ 32 ^ 4896# F9 ESC [ 20 ~ ESC [ 33 ~ ESC [ 20 ^ ESC [ 33 ^ 4897# F10 ESC [ 21 ~ ESC [ 34 ~ ESC [ 21 ^ ESC [ 34 ^ 4898# F11 ESC [ 23 ~ ESC [ 23 $ ESC [ 23 ^ ESC [ 23 @ 4899# F12 ESC [ 24 ~ ESC [ 24 $ ESC [ 24 ^ ESC [ 24 @ 4900# F13 ESC [ 25 ~ ESC [ 25 $ ESC [ 25 ^ ESC [ 25 @ 4901# F14 ESC [ 26 ~ ESC [ 26 $ ESC [ 26 ^ ESC [ 26 @ 4902# F15 (Help) ESC [ 28 ~ ESC [ 28 $ ESC [ 28 ^ ESC [ 28 @ 4903# F16 (Menu) ESC [ 29 ~ ESC [ 29 $ ESC [ 29 ^ ESC [ 29 @ 4904# F17 ESC [ 31 ~ ESC [ 31 $ ESC [ 31 ^ ESC [ 31 @ 4905# F18 ESC [ 32 ~ ESC [ 32 $ ESC [ 32 ^ ESC [ 32 @ 4906# F19 ESC [ 33 ~ ESC [ 33 $ ESC [ 33 ^ ESC [ 33 @ 4907# F20 ESC [ 34 ~ ESC [ 34 $ ESC [ 34 ^ ESC [ 34 @ 4908# 4909# Application 4910# Up ESC [ A ESC [ a ESC O a ESC O A 4911# Down ESC [ B ESC [ b ESC O b ESC O B 4912# Right ESC [ C ESC [ c ESC O c ESC O C 4913# Left ESC [ D ESC [ d ESC O d ESC O D 4914# KP_Enter ^M ESC O M 4915# KP_F1 ESC O P ESC O P 4916# KP_F2 ESC O Q ESC O Q 4917# KP_F3 ESC O R ESC O R 4918# KP_F4 ESC O S ESC O S 4919# XK_KP_Multiply * ESC O j 4920# XK_KP_Add + ESC O k 4921# XK_KP_Separator , ESC O l 4922# XK_KP_Subtract - ESC O m 4923# XK_KP_Decimal . ESC O n 4924# XK_KP_Divide / ESC O o 4925# XK_KP_0 0 ESC O p 4926# XK_KP_1 1 ESC O q 4927# XK_KP_2 2 ESC O r 4928# XK_KP_3 3 ESC O s 4929# XK_KP_4 4 ESC O t 4930# XK_KP_5 5 ESC O u 4931# XK_KP_6 6 ESC O v 4932# XK_KP_7 7 ESC O w 4933# XK_KP_8 8 ESC O x 4934# XK_KP_9 9 ESC O y 4935# 4936# The source-code for rxvt actually defines mappings for F21-F35, using 4937# "ESC [ 35 ~" to "ESC [ 49 ~". Keyboards with more than 12 function keys 4938# are rare, so this entry uses the shift- and control-modifiers as in 4939# xterm+pcfkeys to define keys past F12. 4940# 4941# kIC is normally not used, since rxvt performs a paste for that (shifted 4942# insert), unless private mode 35 is set. 4943# 4944# kDN, kDN5, kDN6, etc are extensions based on the names from xterm+pcfkeys -TD 4945# Removed kDN6, etc (control+shift) since rxvt does not implement this -TD 4946rxvt+pcfkeys|fragment for PC-style fkeys, 4947 kDC=\E[3$, kEND=\E[8$, kHOM=\E[7$, kIC=\E[2$, kLFT=\E[d, 4948 kNXT=\E[6$, kPRV=\E[5$, kRIT=\E[c, kcub1=\E[D, kcud1=\E[B, 4949 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kel=\E[8\^, 4950 kend=\E[8~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 4951 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 4952 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 4953 kf2=\E[12~, kf20=\E[34~, kf21=\E[23$, kf22=\E[24$, 4954 kf23=\E[11\^, kf24=\E[12\^, kf25=\E[13\^, kf26=\E[14\^, 4955 kf27=\E[15\^, kf28=\E[17\^, kf29=\E[18\^, kf3=\E[13~, 4956 kf30=\E[19\^, kf31=\E[20\^, kf32=\E[21\^, kf33=\E[23\^, 4957 kf34=\E[24\^, kf35=\E[25\^, kf36=\E[26\^, kf37=\E[28\^, 4958 kf38=\E[29\^, kf39=\E[31\^, kf4=\E[14~, kf40=\E[32\^, 4959 kf41=\E[33\^, kf42=\E[34\^, kf43=\E[23@, kf44=\E[24@, 4960 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 4961 kfnd=\E[1~, khome=\E[7~, kich1=\E[2~, kind=\E[a, knp=\E[6~, 4962 kpp=\E[5~, kri=\E[b, kslt=\E[4~, kDC5=\E[3\^, kDC6=\E[3@, 4963 kDN=\E[b, kDN5=\EOb, kEND5=\E[8\^, kEND6=\E[8@, 4964 kHOM5=\E[7\^, kHOM6=\E[7@, kIC5=\E[2\^, kIC6=\E[2@, 4965 kLFT5=\EOd, kNXT5=\E[6\^, kNXT6=\E[6@, kPRV5=\E[5\^, 4966 kPRV6=\E[5@, kRIT5=\EOc, kUP=\E[a, kUP5=\EOa, 4967 4968rxvt|rxvt terminal emulator (X Window System), 4969 ncv@, 4970 hpa=\E[%i%p1%dG, kf0=\E[21~, sgr0=\E[m\017, 4971 vpa=\E[%i%p1%dd, use=rxvt-basic, use=ecma+color, 4972rxvt-color|rxvt terminal emulator (X Window System), 4973 use=rxvt, 4974rxvt-256color|rxvt 2.7.9 with xterm 256-colors, 4975 use=xterm+256color, use=rxvt, 4976rxvt-88color|rxvt 2.7.9 with xterm 88-colors, 4977 use=xterm+88color, use=rxvt, 4978rxvt-xpm|rxvt terminal emulator (X Window System), 4979 use=rxvt, 4980rxvt-cygwin|rxvt terminal emulator (X Window System) on cygwin, 4981 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 4982 use=rxvt, 4983rxvt-cygwin-native|rxvt terminal emulator (native MS Window System port) on cygwin, 4984 acsc=+\257\,\256-\^0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330~\376, 4985 use=rxvt-cygwin, 4986 4987# This variant is supposed to work with rxvt 2.7.7 when compiled with 4988# NO_BRIGHTCOLOR defined. rxvt needs more work... 4989rxvt-16color|xterm with 16 colors like aixterm, 4990 ncv#32, use=ibm+16color, use=rxvt, 4991 4992#### MRXVT 4993# mrxvt 0.5.4 4994# 4995# mrxvt is based on rxvt 2.7.11, but has by default XTERM_FKEYS defined, which 4996# makes its function-keys different from other flavors of rxvt -TD 4997mrxvt|multitabbed rxvt, 4998 XT, 4999 kEND=\E[8;2~, kHOM=\E[7;2~, kcub1=\E[D, kcud1=\E[B, 5000 kcuf1=\E[C, kcuu1=\E[A, kend=\E[8~, khome=\E[7~, 5001 kEND3=\E[8;3~, kEND4=\E[8;4~, kEND5=\E[8;5~, 5002 kEND6=\E[8;6~, kEND7=\E[8;7~, kHOM3=\E[7;3~, 5003 kHOM4=\E[7;4~, kHOM5=\E[7;5~, kHOM6=\E[7;6~, 5004 kHOM7=\E[7;7~, use=xterm+r6f2, use=xterm+pcfkeys, 5005 use=rxvt, 5006 5007mrxvt-256color|multitabbed rxvt with 256 colors, 5008 use=xterm+256color, use=mrxvt, 5009 5010#### ETERM 5011# From: Michael Jennings <mej@valinux.com> 5012# 5013# Eterm 0.9.3 5014# 5015# removed kf0 which conflicts with kf10 -TD 5016# remove cvvis which conflicts with cnorm -TD 5017# Eterm does not implement control/shift cursor keys such as kDN6, or kPRV/kNXT 5018# but does otherwise follow the rxvt+pcfkeys model -TD 5019# remove nonworking flash -TD 5020# remove km as per tack test -TD 5021Eterm|Eterm-color|Eterm with xterm-style color support (X Window System), 5022 am, bce, bw, eo, mc5i, mir, msgr, xenl, xon, XT, 5023 btns#5, cols#80, it#8, lines#24, lm#0, ncv@, 5024 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5025 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5026 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 5027 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5028 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 5029 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5030 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 5031 ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 5032 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 5033 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 5034 is1=\E[?47l\E>\E[?1l, 5035 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kNXT@, 5036 kPRV@, ka1=\E[7~, ka3=\E[5~, kb2=\EOu, kbeg=\EOu, kbs=^H, 5037 kc1=\E[8~, kc3=\E[6~, kent=\EOM, khlp=\E[28~, kmous=\E[M, 5038 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 5039 rmam=\E[?7l, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmkx=, 5040 rmso=\E[27m, rmul=\E[24m, 5041 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 5042 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>\E[?1000l\E[?25h, 5043 sc=\E7, 5044 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 5045 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E7\E[?47h, 5046 smir=\E[4h, smkx=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 5047 vpa=\E[%i%p1%dd, use=vt100+enq, use=rxvt+pcfkeys, 5048 use=ecma+color, 5049 5050Eterm-256color|Eterm with xterm 256-colors, 5051 use=xterm+256color, use=Eterm, 5052 5053Eterm-88color|Eterm with 88 colors, 5054 use=xterm+88color, use=Eterm, 5055 5056#### ATERM 5057# Based on rxvt 2.4.8, it has a few differences in key bindings 5058aterm|AfterStep terminal, 5059 XT, 5060 kbs=\177, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, use=rxvt, 5061 5062#### XITERM 5063# xiterm 0.5-5.2 5064# This is not based on xterm's source... 5065# vttest shows several problems with keyboard, cursor-movements. 5066# see also http://invisible-island.net/xterm/xterm.faq.html#bug_xiterm 5067xiterm|internationalized terminal emulator for X, 5068 km@, 5069 kbs=\177, kdch1=\E[3~, use=klone+color, use=xterm-r6, 5070 5071 5072#### HPTERM 5073# HP ships this (HPUX 9 and 10), except for the pb#9600 which was merged in 5074# from BSD termcap. (hpterm: added empty <acsc>, we have no idea what ACS 5075# chars look like --esr) 5076hpterm|X-hpterm|hp X11 terminal emulator, 5077 am, da, db, mir, xhp, 5078 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, pb#9600, xmc#0, 5079 acsc=, bel=^G, bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, 5080 cub1=^H, cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, 5081 cuu1=\EA, dch1=\EP, dim=\E&dH, dl1=\EM, ed=\EJ$<1>, el=\EK, 5082 hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, ind=^J, kbs=^H, 5083 kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 5084 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 5085 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 5086 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, 5087 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, meml=\El, 5088 memu=\Em, pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 5089 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 5090 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 5091 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rev=\E&dB, ri=\ET, 5092 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, 5093 rmul=\E&d@, 5094 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 5095 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 5096 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 5097# HPUX 11 provides a color version. 5098hpterm-color|HP X11 terminal emulator with color, 5099 ccc, 5100 colors#64, pairs#8, 5101 home=\E&a0y0C, 5102 initp=\E&v%p2%da%p3%db%p4%dc%p5%dx%p6%dy%p7%dz%p1%dI, 5103 op=\E&v0S, scp=\E&v%p1%dS, use=hpterm, 5104 5105#### EMU 5106# This is for the extensible terminal emulator on the X11R6 contrib tape. 5107# It corresponds to emu's internal emulation: 5108# emu -term emu 5109# emu's default sets TERM to "xterm", but that doesn't work well -TD 5110# fixes: remove bogus rmacs/smacs, change oc to op, add bce, am -TD 5111# fixes: add civis, cnorm, sgr -TD 5112emu|emu native mode, 5113 am, bce, mir, msgr, xon, 5114 colors#15, cols#80, it#8, lines#24, pairs#64, vt#200, 5115 acsc=61a\202f\260g2j\213k\214l\215m\216n\217o\220q\222s\224t\225u\226v\227w\230x\231~\244, 5116 bel=^G, blink=\EW, bold=\EU, civis=\EZ, clear=\EP\EE0;0;, 5117 cnorm=\Ea, cr=^M, csr=\Ek%p1%d;%p2%d;, cub=\Eq-%p1%d;, 5118 cub1=^H, cud=\Ep%p1%d;, cud1=\EB, cuf=\Eq%p1%d;, cuf1=\EC, 5119 cup=\EE%p1%d;%p2%d;, cuu=\Ep-%p1%d;, cuu1=\EA, 5120 dch=\EI%p1%d;, dch1=\EI1;, dl=\ER%p1%d;, dl1=\ER1;, 5121 ech=\Ej%p1%d;, ed=\EN, el=\EK, el1=\EL, home=\EE0;0;, ht=^I, 5122 hts=\Eh, il=\EQ%p1%d;, il1=\EQ1;, ind=\EG, 5123 is2=\ES\Er0;\Es0;, kbs=^H, kcub1=\EC, kcud1=\EB, kcuf1=\ED, 5124 kcuu1=\EA, kdch1=\177, kent=^M, kf0=\EF00, kf1=\EF01, 5125 kf10=\EF10, kf11=\EF11, kf12=\EF12, kf13=\EF13, kf14=\EF14, 5126 kf15=\EF15, kf16=\EF16, kf17=\EF17, kf18=\EF18, kf19=\EF19, 5127 kf2=\EF02, kf20=\EF20, kf3=\EF03, kf4=\EF04, kf5=\EF05, 5128 kf6=\EF06, kf7=\EF07, kf8=\EF08, kf9=\EF09, kfnd=\Efind, 5129 kich1=\Eins, knp=\Enext, kpp=\Eprior, kslt=\Esel, 5130 op=\Es0;\Er0;, rev=\ET, ri=\EF, rmir=\EX, rmso=\ES, rmul=\ES, 5131 rs2=\ES\Es0;\Er0;, setab=\Es%i%p1%d;, 5132 setaf=\Er%i%p1%d;, 5133 sgr=\ES%?%p1%t\ET%;%?%p2%t\EV%;%?%p3%t\ET%;%?%p4%t\EW%;%?%p6%t\EU%;, 5134 sgr0=\ES, smir=\EY, smso=\ET, smul=\EV, tbc=\Ej, 5135 5136# vt220 Terminfo entry for the Emu emulation, corresponds to 5137# emu -term vt220 5138# with NumLock set (to make the keypad transmit kf0-kf9). 5139# fixes: add am, xenl, corrected sgr0 -TD 5140emu-220|Emu-220 (vt200-7bit mode), 5141 am, xenl, xon, 5142 cols#80, it#8, lines#24, vt#200, 5143 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 5144 blink=\E[0;5m, bold=\E[0;1m, civis=\E[?25l, 5145 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, 5146 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[1D, 5147 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 5148 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 5149 dch=\E[%p1%dP, dch1=\E[1P, dl=\E[%p1%dM, dl1=\E[1M, 5150 ed=\E[0J, el=\E[0K, el1=\E[1K, enacs=\E)0, home=\E[H, ht=^I, 5151 hts=\EH, if=/usr/share/tabset/vt300, il=\E[%p1%dL, 5152 il1=\E[1L, ind=\ED, is2=\E>\E[?1l\E[?3l\E[4l\E[?7h, 5153 kbs=^H, kcmd=\E[29~, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 5154 kcuu1=\E[A, kdch1=\E[3~, kent=\EOM, kf0=\EOp, kf1=\EOq, 5155 kf10=\EOl, kf11=\EOm, kf12=\EOn, kf13=\EOP, kf14=\EOQ, 5156 kf15=\EOR, kf16=\EOS, kf2=\EOr, kf26=\E[17~, kf27=\E[18~, 5157 kf28=\E[19~, kf29=\E[20~, kf3=\EOs, kf30=\E[21~, 5158 kf34=\E[26~, kf37=\E[31~, kf38=\E[32~, kf39=\E[33~, 5159 kf4=\EOt, kf40=\E[34~, kf5=\EOu, kf6=\EOv, kf7=\EOw, 5160 kf8=\EOx, kf9=\EOy, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, 5161 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, rc=\E8, rev=\E[0;7m, 5162 ri=\EM, rmacs=^O, rmcup=\E>, rmkx=\E>, rmso=\E[m, rmul=\E[m, 5163 rs2=\E[4l\E[34l\E[?1l\E[?3l\E[?5l\E[?7h, sc=\E7, 5164 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 5165 sgr0=\E[m, smacs=^N, smcup=\E[?1l\E=, smkx=\E=, 5166 smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, 5167 5168#### MVTERM 5169# A commercial product, Reportedly a version of Xterm with an OPEN LOOK UI, 5170# print interface, ANSI X3.64 colour escape sequences, etc. Newsgroup postings 5171# indicate that it emulates more than one terminal, but incompletely. 5172# 5173# This is adapted from a FreeBSD bug-report by Daniel Rudy <dcrudy@pacbell.net> 5174# It is based on vt102's entry, with some subtle differences, but also 5175# has status line 5176# supports ANSI colors (except for 'op' string) 5177# apparently implements alternate screen like xterm 5178# does not use padding, of course. 5179mvterm|vv100|SwitchTerm aka mvTERM, 5180 am, eslok, hs, km, mir, msgr, xenl, 5181 colors#8, cols#80, it#8, lines#24, pairs#64, 5182 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5183 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 5184 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5185 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5186 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5187 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 5188 dsl=\E[?E, ed=\E[J, el=\E[K, el1=\E[1K$<3>, enacs=\E(B\E)0, 5189 fsl=\E[?F, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 5190 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, 5191 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOy, 5192 kf10=\EOx, kf5=\EOt, kf6=\EOu, kf7=\EOv, kf8=\EOl, kf9=\EOw, 5193 op=\E[100m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 5194 rmcup=\E[2J\E[?47l\E8, rmkx=\E[?1l\E>, rmso=\E[m, 5195 rmul=\E[m, 5196 rs2=\E>\E[1;3;4;5;6l\E[?7h\E[100m\E[m\E[r\E[2J\E[H, 5197 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5198 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 5199 sgr0=\E[m\017, smacs=^N, smcup=\E7\E[?47h, 5200 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 5201 tsl=\E[?E\E[?%i%p1%dT, use=vt100+fnkeys, 5202 5203#### MTERM 5204# 5205# This application is available by email from <mouse@Rodents.Montreal.QC.CA>. 5206# 5207# "mterm -type ansi" sets $TERM to "ansi" 5208mterm-ansi|ANSI emulation, 5209 am, bw, mir, msgr, 5210 it#8, 5211 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5212 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 5213 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 5214 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 5215 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 5216 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, 5217 el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, 5218 il=\E[%p1%dL, il1=\E[L, ind=\E[S, indn=\E[%p1%dS, 5219 invis=\E[8m, is2=\E)0\017, kbs=^H, nel=\EE, rev=\E[7m, 5220 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmso=\E[27m, 5221 rmul=\E[24m, 5222 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 5223 sgr0=\E[m, smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, 5224 vpa=\E[%i%p1%dd, 5225# mterm normally sets $TERM to "mterm" 5226mterm|mouse-sun|Der Mouse term, 5227 am, bw, mir, 5228 it#8, 5229 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^N, cuf1=^S, 5230 cup=\006%p1%d.%p2%d., cuu1=^X, dch1=^Y, dl1=^K, ed=^B, el=^C, 5231 home=^P, ht=^I, il1=^A, ind=^U, kbs=^H, ll=^R, nel=^M^U, ri=^W, 5232 rmir=^O, rmso=^T, smir=^Q, smso=^V, 5233# "mterm -type decansi" sets $TERM to "decansi" 5234# 5235# note: kdch1, kfnd, kslt are in the source code, but do not work -TD 5236decansi|ANSI emulation with DEC compatibility hacks, 5237 am, mir, msgr, xenl, 5238 colors#8, it#8, pairs#64, 5239 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5240 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5241 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 5242 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 5243 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 5244 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5245 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 5246 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, enacs=\E(B\E)0, 5247 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, ich1=, il=\E[%p1%dL, 5248 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, 5249 is2=\E)0\E[r\017, kbs=^H, kcub1=\EOD, kcud1=\EOB, 5250 kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[3~, kf1=\E[11~, 5251 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 5252 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 5253 kf18=\E[32~, kf19=\E[33~, kf2=\E[12~, kf20=\E[34~, 5254 kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, 5255 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, kich1=\E[2~, knp=\E[6~, 5256 kpp=\E[5~, kslt=\E[4~, nel=\EE, op=\E[0m, rc=\E8, rev=\E[7m, 5257 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 5258 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, sc=\E7, 5259 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5260 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 5261 sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, 5262 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, u6=\E[%i%d;%dR, 5263 u7=\E[6n, vpa=\E[%i%p1%dd, 5264 5265#### VWM 5266# 5267# vwmterm is a terminal emulator written for the VWM console window manager 5268# 5269vwmterm|(vwm term), 5270 am, bce, ccc, mir, msgr, npc, xenl, xon, 5271 colors#8, pairs#64, 5272 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5273 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5274 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, 5275 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 5276 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 5277 cuu1=\E[A, cvvis=\E[?25h, dim=\E[2m, ed=\E[J, el=\E[K, 5278 home=\E[H, il1=\E[L, ind=^J, invis=\E[8m, kcub1=\E[D, 5279 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 5280 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[22~, 5281 kf12=\E[23~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 5282 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5283 khome=\E[1~, knp=\E[6~, kpp=\E[5~, rev=\E[7m, rmacs=\E[10m, 5284 rmam=\E[?7l, rmcup=\E[?1049l, rs1=\E[H\E[J\E[m\Ec, 5285 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5286 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 5287 sgr0=\E[0;10m, smacs=\E[11m, smam=\E[?7h, 5288 smcup=\E[?1049h, smso=\E[3m, smul=\E[4m, 5289 5290#### MGR 5291# 5292# MGR is a Bell Labs window system lighter-weight than X. 5293# These entries describe MGR's xterm-equivalent. 5294# They are courtesy of Vincent Broman <broman@nosc.mil> 14 Jan 1997 5295# 5296 5297mgr|Bellcore MGR (non X) window system terminal emulation, 5298 am, km, 5299 bel=^G, bold=\E2n, civis=\E9h, clear=^L, cnorm=\Eh, cr=^M, 5300 csr=\E%p1%d;%p2%dt, cub1=^H, cud1=\Ef, cuf1=\Er, 5301 cup=\E%p2%d;%p1%dM, cuu1=\Eu, cvvis=\E0h, 5302 dch=\E%p1%dE$<5>, dch1=\EE, dl=\E%p1%dd$<3*>, 5303 dl1=\Ed$<3>, ed=\EC, el=\Ec, hd=\E1;2f, ht=^I, hu=\E1;2u, 5304 ich=\E%p1%dA$<5>, ich1=\EA, il=\E%p1%da$<3*>, 5305 il1=\Ea$<3>, ind=^J, kbs=^H, kcub1=\E[D, kcud1=\E[B, 5306 kcuf1=\E[C, kcuu1=\E[A, nel=^M^J, rev=\E1n, rmam=\E5S, 5307 rmso=\E0n, rmul=\E0n, sgr0=\E0n, smam=\E5s, smso=\E1n, 5308 smul=\E4n, 5309mgr-sun|Mgr window with Sun keyboard, 5310 ka1=\E[214z, ka3=\E[216z, kb2=\E[218z, kc1=\E[220z, 5311 kc3=\E[222z, kcpy=\E[197z, kend=\E[220z, kent=\E[250z, 5312 kf1=\E[224z, kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, 5313 kf2=\E[225z, kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, 5314 kf6=\E[229z, kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, 5315 kfnd=\E[200z, khlp=\E[207z, khome=\E[214z, knp=\E[222z, 5316 kopn=\E[198z, kpp=\E[216z, kund=\E[195z, use=mgr, 5317mgr-linux|Mgr window with Linux keyboard, 5318 ka1=\E[H, ka3=\E[5~, kb2=\E[G, kc1=\E[Y, kc3=\E[6~, 5319 kdch1=\E[3~, kend=\E[4~, kf0=\E[[J, kf1=\E[[A, kf10=\E[21~, 5320 kf11=\E[23~, kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, 5321 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5322 khome=\E[1~, knp=\E[6~, kpp=\E[5~, use=mgr, 5323 5324#### SIMPLETERM 5325# st.suckless.org 5326# st-0.1.1 5327# 5328# Note: the original terminfo description uses leading blank to persuade 5329# ncurses to use "st" as its name. Proper fix for that is to use "st" as an 5330# alias. 5331# 5332# Reading the code shows it should work for aixterm 16-colors 5333# - added st-16color 5334# 5335# Using tack: 5336# - set eo (erase-overstrike) 5337# - set xenl 5338# - tbc doesn't work 5339# - hts works 5340# - cbt doesn't work 5341# - shifted cursor-keys send sequences like rxvt 5342# - sgr referred to unimplemented "invis" mode. 5343# Fixes: add eo and xenl per tack, remove nonworking cbt, hts and tbc, invis 5344simpleterm|st| simpleterm, 5345 am, eo, mir, msgr, ul, xenl, 5346 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, 5347 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5348 bel=^G, bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, 5349 cnorm=\E[?12l\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 5350 cub1=^H, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5351 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5352 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 5353 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 5354 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=\177, 5355 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5356 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, 5357 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 5358 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5359 khome=\E[1~, knp=\E[6~, kpp=\E[5~, op=\E[37;40m, rc=\E8, 5360 rev=\E[7m, rmacs=\E(B, rmso=\E[m, rmul=\E[m, sc=\E7, 5361 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5362 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m, 5363 sgr0=\E[0m, smacs=\E(0, smso=\E[7m, smul=\E[4m, 5364st-16color|simpleterm with 16-colors, 5365 use=ibm+16color, use=simpleterm, 5366# 256 colors "works", but when running xterm's test-scripts, some garbage is 5367# shown in the titlebar. 5368st-256color|simpleterm with 256 colors, 5369 ccc@, 5370 initc@, use=xterm+256color, use=simpleterm, 5371 5372#### TERMINATOR 5373# http://software.jessies.org/terminator/ 5374# Tested using their Debian package org.jessies.terminator 6.104.3256 on 64-bit 5375# Debian/current -TD (2011/8/20) 5376# 5377# There are some packaging problems: 5378# a) using Java, the program starts off using 50Mb, and climbs from there, 5379# up to 114Mb after testing (no scrollback). 5380# b) it insists on reinstalling its terminal description in $HOME/.terminfo 5381# (two copies, just in case the host happens to be Mac OS X). 5382# I deleted this after testing with tack. 5383# 5384# Issues/features found with tack: 5385# a) tbc does not work (implying that hts also is broken). 5386# Comparing with the tabs utility shows a problem with the last tabstop on 5387# a line. 5388# b) has xterm-style shifted function-key strings 5389# meta also is used, but control is ignored. 5390# c) has xterm-style modifiers for cursor keys (shift, control, shift+control, meta) 5391# d) some combinations of shift/control send xterm-style sequences for 5392# insert/delete/home/end. 5393# e) numeric keypad sends only numbers (compare with vttest). 5394# f) meta mode (km) is not implemented. 5395# 5396# Issues found with ncurses test-program: 5397# a) bce is inconsistently implemented 5398# b) widths of Unicode values above 256 do not always agree with wcwidth. 5399# 5400# Checked with vttest, found low degree of compatibility there. 5401# 5402# Checked with xterm's scripts, found that the 256-color palette is fixed. 5403# 5404# Fixes: 5405# a) add sgr string 5406# b) corrected sgr0 to reset alternate character set 5407# c) modified smacs/rmacs to use SCS rather than SI/SO 5408# d) removed bce 5409# e) removed km 5410terminator|Terminator no line wrap, 5411 eo, mir, msgr, xenl, xon, 5412 colors#256, cols#80, it#8, lines#24, lm#0, pairs#32767, 5413 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5414 bold=\E[1m, civis=\E[?25l, clear=\E[H\E[2J, 5415 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 5416 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 5417 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 5418 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 5419 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 5420 enacs=\E(B\E)0, flash=^G, home=\E[H, hpa=\E[%i%p1%dG, 5421 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, 5422 is1=\E[?47l\E=\E[?1l, 5423 is2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l, kbs=^H, 5424 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5425 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, 5426 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 5427 kf15=\E[28~, kf16=\E[29~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 5428 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5429 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 5430 op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, 5431 rmcup=\E[?47l\E8, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 5432 rs1=\E>\E[1;3;4;5;6l\E[?7h\E[m\E[r\E[2J\E[H, 5433 rs2=\E[r\E[m\E[2J\E[H\E[?7h\E[?1;3;4;6l\E[4l\E>, 5434 s0ds=\E(B, s1ds=\E(0, sc=\E7, setab=\E[48;5;%p1%dm, 5435 setaf=\E[38;5;%p1%dm, 5436 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 5437 sgr0=\E[m\E(B, smacs=\E(0, smcup=\E7\E[?47h, smir=\E[4h, 5438 smso=\E[7m, smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, 5439 use=xterm+sl-twm, 5440 5441######## UNIX VIRTUAL TERMINALS, VIRTUAL CONSOLES, AND TELNET CLIENTS 5442# 5443 5444# Columbus UNIX virtual terminal. This terminal also appears in 5445# UNIX 4.0 and successors as line discipline 1 (?), but is 5446# undocumented and does not really work quite right. 5447cbunix|cb unix virtual terminal, 5448 OTbs, am, da, db, 5449 cols#80, lines#24, lm#0, 5450 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 5451 cup=\EG%p2%c%p1%c, cuu1=\EA, dch1=\EM, dl1=\EN, ed=\EL, 5452 el=\EK, ich1=\EO, il1=\EP, ind=^J, kcub1=\ED, kcud1=\EB, 5453 kcuf1=\EC, kcuu1=\EA, khome=\EE, rmso=\Eb^D, rmul=\Eb^A, 5454 smso=\Ea^D, smul=\Ea^A, 5455# (vremote: removed obsolete ":nl@:" -- esr) 5456vremote|virtual remote terminal, 5457 am@, 5458 cols#79, use=cbunix, 5459 5460pty|4bsd pseudo teletype, 5461 cup=\EG%p1%{32}%+%c%p2%{32}%+%c, rmso=\Eb$, rmul=\Eb!, 5462 smso=\Ea$, smul=\Ea!, use=cbunix, 5463 5464#### Emacs 5465 5466# The codes supported by the term.el terminal emulation in GNU Emacs 19.30 5467eterm|gnu emacs term.el terminal emulation, 5468 am, mir, xenl, 5469 cols#80, lines#24, 5470 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, 5471 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5472 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5473 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5474 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 5475 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 5476 il=\E[%p1%dL, il1=\E[L, ind=^J, rev=\E[7m, 5477 rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 5478 sgr0=\E[m, smcup=\E7\E[?47h, smir=\E[4h, smso=\E[7m, 5479 smul=\E[4m, 5480 5481# The codes supported by the term.el terminal emulation in GNU Emacs 22.2 5482eterm-color|Emacs term.el terminal emulator term-protocol-version 0.96, 5483 am, mir, msgr, xenl, 5484 colors#8, cols#80, lines#24, pairs#64, 5485 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 5486 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5487 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5488 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5489 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 5490 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 5491 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kbs=\177, 5492 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 5493 kdch1=\E[3~, kend=\E[4~, khome=\E[1~, kich1=\E[2~, 5494 knp=\E[6~, kpp=\E[5~, op=\E[39;49m, rc=\E8, rev=\E[7m, 5495 ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, rs1=\Ec, 5496 sc=\E7, setab=\E[%p1%'('%+%dm, setaf=\E[%p1%{30}%+%dm, 5497 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m, 5498 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 5499 u6=\E[%i%d;%dR, u7=\E[6n, 5500 5501#### Screen 5502 5503# Entries for use by the `screen' program by Juergen Weigert, 5504# Michael Schroeder, Oliver Laumann. The screen and 5505# screen-w entries came with version 3.7.1. The screen2 and screen3 entries 5506# come from University of Wisconsin and may be older. 5507# (screen: added <cnorm> on ANSI model -- esr) 5508# 5509# 'screen' defines extensions to termcap. Some are used in its terminal 5510# description: 5511# G0 (bool) Terminal can deal with ISO 2022 font selection sequences. 5512# AX (bool) Does understand ANSI set default fg/bg color 5513# (\E[39m / \E[49m). 5514# S0 (str) Switch charset 'G0' to the specified charset. 5515# E0 (str) Switch charset 'G0' back to standard charset. 5516# 5517# tested with screen 3.09.08 5518screen|VT 100/ANSI X3.64 virtual terminal, 5519 OTbs, OTpt, am, km, mir, msgr, xenl, G0, 5520 colors#8, cols#80, it#8, lines#24, ncv@, pairs#64, U8#1, 5521 acsc=++\,\,--..00``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5522 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 5523 clear=\E[H\E[J, cnorm=\E[34h\E[?25h, cr=^M, 5524 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5525 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5526 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 5527 cvvis=\E[34l, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 5528 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 5529 flash=\Eg, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 5530 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcbt=\E[Z, 5531 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 5532 kdch1=\E[3~, kend=\E[4~, kf1=\EOP, kf10=\E[21~, 5533 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 5534 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 5535 khome=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~, 5536 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 5537 rmcup=\E[?1049l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[23m, 5538 rmul=\E[24m, rs2=\Ec\E[?1000l\E[?25h, sc=\E7, 5539 sgr=\E[0%?%p6%t;1%;%?%p1%t;3%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;, 5540 sgr0=\E[m\017, smacs=^N, smcup=\E[?1049h, smir=\E[4h, 5541 smkx=\E[?1h\E=, smso=\E[3m, smul=\E[4m, tbc=\E[3g, E0=\E(B, 5542 S0=\E(%p1%c, use=ecma+color, 5543# The bce and status-line entries are from screen 3.9.13 (and require some 5544# changes to .screenrc). 5545screen-bce|VT 100/ANSI X3.64 virtual terminal with bce, 5546 bce, 5547 ech@, use=screen, 5548screen-s|VT 100/ANSI X3.64 virtual terminal with hardstatus line, 5549 dsl=\E_\E\\, fsl=\E\\, tsl=\E_, use=screen, 5550 5551# ====================================================================== 5552# Entries for GNU Screen with 16 colors. 5553# Those variations permit to benefit from 16 colors palette, and from 5554# bold font and blink attribute separated from bright colors. But they 5555# are less portable than the generic "screen" 8 color entries: Their 5556# usage makes real sense only if the terminals you attach and reattach 5557# do all support 16 color palette. 5558 5559screen-16color|GNU Screen with 16 colors, 5560 use=ibm+16color, use=screen, 5561 5562screen-16color-s|GNU Screen with 16 colors and status line, 5563 use=ibm+16color, use=screen-s, 5564 5565screen-16color-bce|GNU Screen with 16 colors and BCE, 5566 use=ibm+16color, use=screen-bce, 5567 5568screen-16color-bce-s|GNU Screen with 16 colors, BCE, and status line, 5569 bce, use=ibm+16color, use=screen-s, 5570 5571# ====================================================================== 5572# Entries for GNU Screen 4.02 with --enable-colors256. 5573 5574screen-256color|GNU Screen with 256 colors, 5575 ccc@, 5576 initc@, use=xterm+256color, use=screen, 5577 5578screen-256color-s|GNU Screen with 256 colors and status line, 5579 ccc@, 5580 initc@, use=xterm+256color, use=screen-s, 5581 5582screen-256color-bce|GNU Screen with 256 colors and BCE, 5583 ccc@, 5584 initc@, use=xterm+256color, use=screen-bce, 5585 5586screen-256color-bce-s|GNU Screen with 256 colors, BCE, and status line, 5587 bce, ccc@, 5588 initc@, use=xterm+256color, use=screen-s, 5589 5590# ====================================================================== 5591 5592# Read the fine manpage: 5593# When screen tries to figure out a terminal name for 5594# itself, it first looks for an entry named "screen.<term>", 5595# where <term> is the contents of your $TERM variable. If 5596# no such entry exists, screen tries "screen" (or "screen-w" 5597# if the terminal is wide (132 cols or more)). If even this 5598# entry cannot be found, "vt100" is used as a substitute. 5599# 5600# Notwithstanding the manpage, screen uses its own notion of the termcap 5601# and some keys from "screen.<term>" are ignored. Here is an entry which 5602# covers those (tested with screen 4.00.02) -TD 5603screen+fkeys|function-keys according to screen, 5604 kend=\E[4~, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kfnd@, 5605 khome=\E[1~, kslt@, 5606# 5607# Here are a few customized entries which are useful -TD 5608# 5609# Notes: 5610# (a) screen does not support invis. 5611# (b) screen's implementation of bw is incorrect according to tack. 5612# (c) screen appears to hardcode the strings for khome/kend, making it 5613# necessary to override the "use=" clause's values (screen+fkeys). 5614# (d) screen sets $TERMCAP to a termcap-formatted copy of the 'screen' entry, 5615# which is NOT the same as the terminfo screen.<term>. 5616# (e) when screen finds one of these customized entries, it sets $TERM to 5617# match. Hence, no "screen.xterm" entry is provided, since that would 5618# create heartburn for people running remote xterm's. 5619# 5620# xterm (-xfree86 or -r6) does not normally support kIC, kNXT and kPRV 5621# since the default translations override the built-in keycode 5622# translation. They are suppressed here to show what is tested by tack. 5623screen.xterm-xfree86|screen.xterm-new|screen customized for modern xterm, 5624 bce@, bw, 5625 invis@, kIC@, kNXT@, kPRV@, meml@, memu@, 5626 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m, 5627 E3@, use=screen+fkeys, use=xterm-new, 5628# xterm-r6 does not really support khome/kend unless it is propped up by 5629# the translations resource. 5630screen.xterm-r6|screen customized for X11R6 xterm, 5631 bw, use=screen+fkeys, use=xterm-r6, 5632# Color applications running in screen and TeraTerm do not play well together 5633# on Solaris because Sun's curses implementation gets confused. 5634screen.teraterm|disable ncv in teraterm, 5635 ncv#127, 5636 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 5637 use=screen+fkeys, use=screen, 5638# Other terminals 5639screen.rxvt|screen in rxvt, 5640 bw, XT, 5641 cvvis@, flash@, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 5642 kcuu1=\EOA, use=screen+fkeys, use=vt100+enq, 5643 use=rxvt+pcfkeys, use=vt220+keypad, use=screen, 5644screen.Eterm|screen in Eterm, 5645 use=screen+fkeys, use=Eterm, 5646screen.mrxvt|screen in mrxvt, 5647 use=screen+fkeys, use=mrxvt, 5648screen.vte|screen in any VTE-based terminal, 5649 use=screen+fkeys, use=vte, 5650screen.gnome|screen in GNOME Terminal, 5651 use=screen+fkeys, use=gnome, 5652screen.konsole|screen in KDE console window, 5653 use=screen+fkeys, use=konsole, 5654# fix the backspace key 5655screen.linux|screen in linux console, 5656 bw, 5657 kbs=\177, kcbt@, use=screen+fkeys, use=screen, 5658screen.mlterm|screen in mlterm, 5659 use=screen+fkeys, use=mlterm, 5660 5661# The default "screen" entry is reasonably portable, but not optimal for the 5662# most widely-used terminal emulators. The "bce" capability is supported in 5663# screen since 3.9.13, and when used, will require fewer characters to be sent 5664# to the terminal for updates. 5665# 5666# If you are using only terminals which support bce, then you can use this 5667# feature in your screen configuration. 5668# 5669# Adding these lines to your ".screenrc" file will allow using these customized 5670# entries: 5671# term screen-bce 5672# bce on 5673# defbce on 5674screen-bce.xterm-new|screen optimized for modern xterm, 5675 bce, 5676 ech@, use=screen.xterm-new, 5677screen-bce.rxvt|screen optimized for rxvt, 5678 bce, 5679 ech@, use=screen.rxvt, 5680screen-bce.Eterm|screen optimized for Eterm, 5681 bce, 5682 ech@, use=screen.Eterm, 5683screen-bce.mrxvt|screen optimized for mrxvt, 5684 bce, 5685 ech@, use=screen.mrxvt, 5686screen-bce.gnome|screen optimized for GNOME-Terminal, 5687 bce, 5688 ech@, use=screen.gnome, 5689screen-bce.konsole|screen optimized for KDE console window, 5690 bce, 5691 ech@, use=screen.konsole, 5692screen-bce.linux|screen optimized for linux console, 5693 bce, 5694 ech@, use=screen.linux, 5695screen-bce.mlterm|screen optimized for mlterm, 5696 bce, 5697 ech@, use=screen.mlterm, 5698 5699screen-w|VT 100/ANSI X3.64 virtual terminal with 132 cols, 5700 cols#132, use=screen, 5701 5702screen2|old VT 100/ANSI X3.64 virtual terminal, 5703 cols#80, it#8, lines#24, 5704 cbt=\E[Z, clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=^H, 5705 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 5706 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5707 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 5708 el=\E[K, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=, il=\E[%p1%dL, 5709 il1=\E[L, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 5710 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 5711 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, 5712 nel=^M^J, rc=\E8, ri=\EM, rmir=\E[4l, rmso=\E[23m, 5713 rmul=\E[24m, rs1=\Ec, sc=\E7, sgr0=\E[m, smir=\E[4h, 5714 smso=\E[3m, smul=\E[4m, tbc=\E[3g, 5715# (screen3: removed unknown ":xv:LP:G0:" -- esr) 5716screen3|older VT 100/ANSI X3.64 virtual terminal, 5717 km, mir, msgr, 5718 cols#80, it#8, lines#24, 5719 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 5720 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5721 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5722 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 5723 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 5724 el=\E[K, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 5725 il=\E[%p1%dL, il1=\E[L, ind=^J, is2=\E)0, kbs=^H, kcub1=\EOD, 5726 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, 5727 kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 5728 rmir=\E[4l, rmkx=\E>, rmso=\E[23m, rmul=\E[24m, rs1=\Ec, 5729 sc=\E7, sgr0=\E[m, smir=\E[4h, smkx=\E=, smso=\E[3m, 5730 smul=\E[4m, tbc=\E[3g, 5731 5732#### NCSA Telnet 5733 5734# Francesco Potorti <F.Potorti@cnuce.cnr.it>: 5735# NCSA telnet is one of the most used telnet clients for the Macintosh. It has 5736# been maintained until recently by the National Center for Supercomputer 5737# Applications, and it is feature rich, stable and free. It can be downloaded 5738# from www.ncsa.edu. This terminfo description file is based on xterm-vt220, 5739# xterm+sl, and the docs at NCSA. It works well. 5740# 5741# NCSA Telnet 2.6 for Macintosh in vt220 8-bit emulation mode 5742# The terminal options should be set as follows: 5743# Xterm sequences ON 5744# use VT wrap mode ON 5745# use Emacs arrow keys OFF 5746# CTRL-COMND is Emacs meta ON 5747# 8 bit mode ON 5748# answerback string: "ncsa-vt220-8" 5749# setup keys: all disabled 5750# 5751# Application mode is not used. 5752# 5753# Other special mappings: 5754# Apple VT220 5755# HELP Find 5756# HOME Insert here 5757# PAGEUP Remove 5758# DEL Select 5759# END Prev Screen 5760# PAGEDOWN Next Screen 5761# 5762# Though it supports ANSI color, NCSA Telnet uses color to represent blinking 5763# text. 5764# 5765# The status-line manipulation is a mapping of the xterm-compatible control 5766# sequences for setting the window-title. So you must use tsl and fsl in 5767# pairs, since the latter ends the string that is loaded to the window-title. 5768ncsa-m|ncsa-vt220-8|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, 5769 am, km, mir, msgr, xenl, 5770 acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 5771 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 5772 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 5773 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 5774 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 5775 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 5776 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 5777 el=\E[K, el1=\E[1K, enacs=\E)0, flash=\E[?5h\E[?5l, 5778 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 5779 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, 5780 ind=\n$<150*>, 5781 is2=\E7\E[r\E[m\E[?7h\E[?1;4;6l\E[4l\E8\E>, kbs=^H, 5782 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5783 kdch1=\E[4~, kend=\E[5~, kf1=\E[17~, kf10=\E[28~, 5784 kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, kf14=\E[33~, 5785 kf15=\E[34~, kf2=\E[18, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, 5786 kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khlp=\E[1~, 5787 khome=\E[2~, knp=\E[6~, kpp=\E[3~, mc4=\E[4i, mc5=\E[5i, 5788 rc=\E8, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EM, 5789 rmacs=\E(B, rmam=\E[?7l, rmcup=\E[2J\E8, rmir=\E[4l, 5790 rmso=\E[27m, rmul=\E[24m, 5791 rs2=\E7\E[r\E8\E[m\E[?7h\E[?1;4;6l\E[4l\E>, sc=\E7, 5792 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m%?%p9%t\E(0%e\E(B%;, 5793 sgr0=\E[m\E(B, smacs=\E(0, smam=\E[?7h, smcup=\E7, 5794 smir=\E[4h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 5795 u8=\E[?62;1;6c, use=xterm+sl, use=ansi+enq, 5796ncsa|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, 5797 use=ncsa-m, use=klone+color, 5798ncsa-ns|NCSA Telnet 2.7 for Macintosh in vt220-8 mode, 5799 hs@, 5800 dsl@, fsl@, tsl@, use=ncsa, 5801ncsa-m-ns|NCSA Telnet 2.6 for Macintosh in vt220-8 mode, 5802 hs@, 5803 dsl@, fsl@, tsl@, use=ncsa-m, 5804# alternate -TD: 5805# The documented function-key mapping refers to the Apple Extended Keyboard 5806# (e.g., NCSA Telnet's F1 corresponds to a VT220 F6). We use the VT220-style 5807# codes, however, since the numeric keypad (VT100) PF1-PF4 are available on 5808# some keyboards and many applications require these as F1-F4. 5809# 5810ncsa-vt220|NCSA Telnet using vt220-compatible function keys, 5811 kf1=\EOP, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 5812 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 5813 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, 5814 kf20=\E[34~, kf3=\EOR, kf4=\EOS, kf6=\E[17~, kf7=\E[18~, 5815 kf8=\E[19~, kf9=\E[20~, use=ncsa, 5816 5817#### Pilot Pro Palm-Top 5818# 5819# Termcap for Top Gun Telnet and SSH on the Palm Pilot. 5820# http://www.ai/~iang/TGssh/ 5821pilot|tgtelnet|Top Gun Telnet on the Palm Pilot Professional, 5822 OTbs, am, xenl, 5823 cols#39, lines#16, 5824 bel=^G, clear=\Ec, cr=^M, cub1=^H, cud1=^J, 5825 cup=\Em%p1%{32}%+%c%p2%{32}%+%c, home=\Em\s\s, ht=^I, 5826 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, knp=^L, kpp=^K, nel=\Em~\s, 5827 rmso=\EB, smso=\Eb, 5828 5829# From: Federico Bianchi <bianchi@www.arte.unipi.it> 5830# These entries are for the Embeddable Linux Kernel System (ELKS) 5831# project - an heavily stripped down Linux to be run on 16 bit 5832# boxes or, eventually, to be used in embedded systems - and have been 5833# adapted from the stock ELKS termcap. The project itself looks stalled, 5834# and the latest improvements I know of date back to March 2000. 5835# 5836# To cope with the ELKS dumb console I added an "elks-glasstty" entry; 5837# as an added bonus, this deals with all the capabilities common to 5838# both VT52 and ANSI (or, eventually, "special") modes. 5839 5840elks-glasstty|ELKS glass-TTY capabilities, 5841 OTbs, am, 5842 cols#80, it#8, lines#25, 5843 bel=^G, cr=^M, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 5844 nel=^M^J, 5845 5846elks-vt52|ELKS vt52 console, 5847 clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 5848 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\EK, 5849 home=\EH, use=elks-glasstty, 5850 5851elks-ansi|ELKS ANSI console, 5852 clear=\E[H\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 5853 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 5854 rmso=\E[m, smso=\E[7m, use=elks-glasstty, 5855 5856# As a matter of fact, ELKS 0.0.83 on PCs defaults to ANSI emulation 5857# instead of VT52, but the "elks" entry still refers to the latter. 5858 5859elks|default ELKS console, 5860 use=elks-vt52, 5861 5862# Project SIBO (for Psion 3 palmtops) console is identical to the ELKS 5863# one but in screen size 5864 5865sibo|ELKS SIBO console, 5866 cols#61, it#8, lines#20, use=elks-vt52, 5867 5868######## COMMERCIAL WORKSTATION CONSOLES 5869# 5870 5871#### Alpha consoles 5872# 5873 5874# This is from the OSF/1 Release 1.0 termcap file 5875pccons|pcconsole|ANSI (mostly) Alpha PC console terminal emulation, 5876 am, xon, 5877 cols#80, lines#25, 5878 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5879 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 5880 el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, kbs=^H, 5881 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 5882 nel=^M^J, rev=\E[7m, rmso=\E[m, sgr0=\E[m, smso=\E[7m, 5883 5884#### Sun consoles 5885# 5886 5887# :is1: resets scrolling region in case a previous user had used "tset vt100" 5888oldsun|Sun Microsystems Workstation console, 5889 OTbs, am, km, mir, msgr, 5890 cols#80, it#8, lines#34, 5891 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 5892 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 5893 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 5894 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 5895 is1=\E[1r, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 5896 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 5897 rmso=\E[m, sgr0=\E[m, smso=\E[7m, 5898# From: Alexander Lukyanov <lav@video.yars.free.net>, 14 Nov 1995 5899# <lines> capability later corrected by J.T. Conklin <jtc@cygnus.com> 5900# SGR 1, 4 aren't supported - removed bold/underline (T.Dickey 17 Jan 1998) 5901sun-il|Sun Microsystems console with working insert-line, 5902 am, km, msgr, 5903 cols#80, lines#34, 5904 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 5905 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 5906 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, ht=^I, 5907 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 5908 kb2=\E[218z, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 5909 kcuu1=\E[A, kdch1=\177, kend=\E[220z, kf1=\E[224z, 5910 kf10=\E[233z, kf11=\E[234z, kf12=\E[235z, kf2=\E[225z, 5911 kf3=\E[226z, kf4=\E[227z, kf5=\E[228z, kf6=\E[229z, 5912 kf7=\E[230z, kf8=\E[231z, kf9=\E[232z, khome=\E[214z, 5913 kich1=\E[247z, knp=\E[222z, kopt=\E[194z, kpp=\E[216z, 5914 kres=\E[193z, kund=\E[195z, rev=\E[7m, rmso=\E[m, rmul@, 5915 rs2=\E[s, sgr=\E[0%?%p1%p3%|%t;7%;m, sgr0=\E[m, 5916 smso=\E[7m, u8=\E[1t, u9=\E[11t, 5917# On some versions of CGSIX framebuffer firmware (SparcStation 5), <il1>/<il> 5918# flake out on the last line. Unfortunately, without them the terminal has no 5919# way to scroll. 5920sun-cgsix|sun-ss5|Sun SparcStation 5 console, 5921 il@, il1@, use=sun-il, 5922# If you are using an SS5, change the sun definition to use sun-ss5. 5923sun|sun1|sun2|Sun Microsystems Inc. workstation console, 5924 use=sun-il, 5925 5926sun+sl|Sun Workstation window status line, 5927 hs, 5928 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, 5929 5930# From: <john@ucbrenoir> Tue Sep 24 13:14:44 1985 5931sun-s|Sun Microsystems Workstation window with status line, 5932 hs, 5933 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun, 5934sun-e-s|sun-s-e|Sun Microsystems Workstation with status hacked for emacs, 5935 hs, 5936 dsl=\E]l\E\\, fsl=\E\\, tsl=\E]l, use=sun-e, 5937sun-48|Sun 48-line window, 5938 cols#80, lines#48, use=sun, 5939sun-34|Sun 34-line window, 5940 cols#80, lines#34, use=sun, 5941sun-24|Sun 24-line window, 5942 cols#80, lines#24, use=sun, 5943sun-17|Sun 17-line window, 5944 cols#80, lines#17, use=sun, 5945sun-12|Sun 12-line window, 5946 cols#80, lines#12, use=sun, 5947sun-1|Sun 1-line window for sysline, 5948 eslok, hs, 5949 cols#80, lines#1, 5950 dsl=^L, fsl=\E[K, tsl=^M, use=sun, 5951sun-e|sun-nic|sune|Sun Microsystems Workstation without insert character, 5952 ich1@, rmir@, smir@, use=sun, 5953sun-c|sun-cmd|Sun Microsystems Workstation console with scrollable history, 5954 lines#35, 5955 rmcup=\E[>4h, smcup=\E[>4l, use=sun, 5956sun-type4|Sun Workstation console with type 4 keyboard, 5957 kcub1=\E[217z, kcud1=\E[221z, kcuf1=\E[219z, 5958 kcuu1=\E[215z, use=sun-il, 5959 5960# Most of the current references to sun-color are from users wondering why this 5961# is the default on install. Details from reading the wscons manpage, adding 5962# cub, etc., here (rather than in the base sun-il entry) since it is not clear 5963# when those were added -TD (2005-05-28) 5964# 5965# According to wscons manpage, color is supported only on IA systems. 5966# Sun's terminfo entry documents bold and smul/rmul capabilities, but wscons 5967# does not list these. It also sets ncv#3, however that corresponds to 5968# underline and standout. 5969# 5970# Since the documentation and terminfo do not agree, see also current code at 5971# http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/uts/common/io/tem_safe.c 5972# 5973# That (actually a different driver which "supports" sun-color) also supports 5974# these features: 5975# vpa=\E[%i%p1%dd 5976# hpa=\E[%i%p1%d` 5977# cbt=\E[Z 5978# dim=\E[2m 5979# blink=\E[5m 5980# It supports bold, but not underline -TD (2009-09-19) 5981sun-color|Sun Microsystems Workstation console with color support (IA systems), 5982 colors#8, ncv#3, pairs#64, 5983 bold=\E[1m, cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 5984 cuu=\E[%p1%dA, home=\E[H, op=\E[0m, rs2=\E[s, 5985 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 5986 setb=\E[4%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 5987 setf=\E[3%?%p1%{1}%=%t4%e%p1%{3}%=%t6%e%p1%{4}%=%t1%e%p1%{6}%=%t3%e%p1%d%;m, 5988 sgr=\E[0%?%p6%t;1%;%?%p1%p3%|%t;7%;m, sgr0=\E[m, 5989 smso=\E[7m, use=sun, 5990 5991#### Iris consoles 5992# 5993 5994# (wsiris: this had extension capabilities 5995# :HS=\E7F2:HE=\E7F7:\ 5996# :CT#2:CZ=*Bblack,red,green,yellow,blue,magenta,cyan,*Fwhite: 5997# See the note on Iris extensions near the end of this file. 5998# Finally, removed suboptimal <clear>=\EH\EJ and added <cud1> & 5999# <flash> from BRL -- esr) 6000wsiris|iris40|iris emulating a 40 line visual 50 (approximately), 6001 OTbs, OTnc, OTpt, am, 6002 OTkn#3, cols#80, it#8, lines#40, 6003 OTnl=\EB, bel=^G, clear=\Ev, cnorm=\E>, cub1=^H, cud1=\EB, 6004 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 6005 cvvis=\E;, dim=\E7F2, dl1=\EM, ed=\EJ, el=\EK, 6006 flash=\E7F4\E7B1\013\E7F7\E7B0, home=\EH, ht=^I, il1=\EL, 6007 ind=^J, is2=\E7B0\E7F7\E7C2\E7R3, kcub1=\ED, kcud1=\EB, 6008 kcuf1=\EC, kcuu1=\EA, kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, 6009 kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, kf9=\E9, ri=\EI, 6010 rmso=\E0@, rmul=\E7R3\E0@, sgr0=\E7F7, smso=\E9P, 6011 smul=\E7R2\E9P, 6012 6013#### NeWS consoles 6014# 6015# Console terminal windows under the NeWS (Sun's Display Postscript windowing 6016# environment). Note: these have nothing to do with Sony's News workstation 6017# line. 6018# 6019 6020# Entry for NeWS's psterm from Eric Messick & Hugh Daniel 6021# (psterm: unknown ":sl=\EOl:el=\ENl:" removed -- esr) 6022psterm|psterm-basic|NeWS psterm-80x34, 6023 OTbs, am, hs, km, ul, 6024 cols#80, it#8, lines#34, 6025 blink=\EOb, bold=\EOd, clear=^L, csr=\EE%p1%d;%p2%d;, 6026 cub1=\ET, cud1=\EP, cuf1=\EV, cup=\E%p1%d;%p2%d;, cuu1=\EY, 6027 dch1=\EF, dl1=\EK, ed=\EB, el=\EC, flash=\EZ, fsl=\ENl, 6028 home=\ER, ht=^I, il1=\EA, ind=\EW, is1=\EN*, kcub1=\E[D, 6029 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ll=\EU, rc=^\, rev=\EOr, 6030 ri=\EX, rmcup=\ENt, rmir=\ENi, rmso=\ENo, rmul=\ENu, sc=^], 6031 sgr0=\EN*, smcup=\EOt, smir=\EOi, smso=\EOo, smul=\EOu, 6032 tsl=\EOl, 6033psterm-96x48|NeWS psterm 96x48, 6034 cols#96, lines#48, use=psterm, 6035psterm-90x28|NeWS psterm 90x28, 6036 cols#90, lines#28, use=psterm, 6037psterm-80x24|NeWS psterm 80x24, 6038 cols#80, lines#24, use=psterm, 6039# This is a faster termcap for psterm. Warning: if you use this termcap, 6040# some control characters you type will do strange things to the screen. 6041# (psterm-fast: unknown ":sl=^Ol:el=^Nl:" -- esr) 6042psterm-fast|NeWS psterm fast version (flaky ctrl chars), 6043 OTbs, am, hs, km, ul, 6044 cols#80, it#8, lines#34, 6045 blink=^Ob, bold=^Od, clear=^L, csr=\005%p1%d;%p2%d;, 6046 cub1=^T, cud1=^P, cuf1=^V, cup=\004%p1%d;%p2%d;, cuu1=^Y, 6047 dch1=^F, dl1=^K, ed=^B, el=^C, flash=^Z, fsl=^Nl, home=^R, ht=^I, 6048 il1=^A, ind=^W, is1=^N*, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 6049 kcuu1=\E[A, ll=^U, rc=^\, rev=^Or, ri=^X, rmcup=^Nt, rmir=^Ni, 6050 rmso=^No, rmul=^Nu, sc=^], sgr0=^N*, smcup=^Ot, smir=^Oi, 6051 smso=^Oo, smul=^Ou, tsl=^Ol, 6052 6053#### NeXT consoles 6054# 6055# Use `glasstty' for the Workspace application 6056# 6057 6058# From: Dave Wetzel <dave@turbocat.snafu.de> 22 Dec 1995 6059next|NeXT console, 6060 am, xt, 6061 cols#80, it#8, lines#24, 6062 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 6063 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 6064 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 6065 rmso=\E[4;1m, sgr0=\E[m, smso=\E[4;2m, 6066nextshell|NeXT Shell application, 6067 am, 6068 cols#80, 6069 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, kbs=^H, kcub1=^H, 6070 kcud1=^J, nel=^M^J, 6071 6072#### Sony NEWS workstations 6073# 6074 6075# (news-unk: this had :KB=news: -- esr) 6076news-unk|SONY NEWS vt100 emulator common entry, 6077 OTbs, OTpt, am, xenl, 6078 cols#80, 6079 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 6080 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 6081 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, 6082 ed=\E[J, el=\E[K, home=\E[H, ht=^I, 6083 if=/usr/share/tabset/vt100, il=\E[%p1%dL, il1=\E[L, 6084 is2=\E[?7h\E[?1h\E[?3l\E7\E8, kbs=^H, kcub1=\EOD, 6085 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOY, kf1=\EOP, 6086 kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, 6087 kf8=\EOW, kf9=\EOX, rc=\E8, rev=\E[7m, ri=\EM, 6088 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 6089 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[r, sc=\E7, 6090 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 6091# 6092# (news-29: this had :TY=ascii: --esr) 6093news-29, 6094 lines#29, use=news-unk, 6095# (news-29-euc: this had :TY=euc: --esr) 6096news-29-euc, 6097 use=news-29, 6098# (news-29-sjis: this had :TY=sjis: --esr) 6099news-29-sjis, 6100 use=news-29, 6101# 6102# (news-33: this had :TY=ascii: --esr) 6103news-33, 6104 lines#33, use=news-unk, 6105# (news-33-euc: this had :TY=euc: --esr) 6106news-33-euc, 6107 use=news-33, 6108# (news-33-sjis: this had :TY=sjis: --esr) 6109news-33-sjis, 6110 use=news-33, 6111# 6112# (news-42: this had :TY=ascii: --esr) 6113news-42, 6114 lines#42, use=news-unk, 6115# (news-42-euc: this had :TY=euc: --esr) 6116news-42-euc, 6117 use=news-42, 6118# (news-42-sjis: this had :TY=sjis: --esr) 6119news-42-sjis, 6120 use=news-42, 6121# 6122# NEWS-OS old termcap entry 6123# 6124# (news-old-unk: this had :KB=news:TY=sjis: --esr) 6125news-old-unk|SONY NEWS vt100 emulator common entry, 6126 OTbs, OTpt, am, xenl, 6127 cols#80, vt#3, 6128 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, 6129 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 6130 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 6131 home=\E[H, ht=^I, if=/usr/share/tabset/vt100, kbs=^H, 6132 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 6133 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, ri=\EM, 6134 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 6135 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 6136 sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 6137# 6138# (nwp512: this had :DE=^H:, which I think means <OTbs> --esr) 6139nwp512|news|nwp514|news40|vt100-bm|old sony vt100 emulator 40 lines, 6140 OTbs, 6141 lines#40, 6142 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, 6143 use=news-old-unk, 6144# 6145# (nwp512-a: this had :TY=ascii: and the alias vt100-bm --esr) 6146nwp512-a|nwp514-a|news-a|news42|news40-a|sony vt100 emulator 42 line, 6147 lines#42, 6148 is2=\E[?7h\E[?1l\E[?3l\E7\E[1;42r\E8, 6149 use=news-old-unk, 6150# 6151# (nwp-512-o: this had :KB=nwp410:DE=^H: I interpret the latter as <OTbs>. --esr) 6152nwp512-o|nwp514-o|news-o|news40-o|vt100-bm-o|sony vt100 emulator 40 lines, 6153 OTbs, 6154 lines#40, 6155 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;40r\E8, 6156 use=news-old-unk, 6157# 6158# (nwp513: this had :DE=^H: and the alias vt100-bm --esr) 6159nwp513|nwp518|nwe501|newscbm|news31|sony vt100 emulator 33 lines, 6160 OTbs, 6161 lines#31, 6162 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, 6163 use=news-old-unk, 6164# 6165# (nwp513-a: this had :TY=ascii: and :DE=^H:, which I interpret as <OTbs>; --esr) 6166# also the alias vt100-bm. 6167nwp513-a|nwp518-a|nwe501-a|nwp251-a|newscbm-a|news31-a|newscbm33|news33|old sony vt100 emulator 33 lines, 6168 OTbs, 6169 lines#33, 6170 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;33r\E8, 6171 use=news-old-unk, 6172# 6173# (nwp513-o: had :DE=^H:, I think that's <OTbs>; also the alias vt100-bm --esr) 6174nwp513-o|nwp518-o|nwe501-o|nwp251-o|newscbm-o|news31-o|old sony vt100 emulator 33 lines, 6175 OTbs, 6176 lines#31, 6177 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;31r\E8, 6178 use=news-old-unk, 6179# 6180# (news28: this had :DE=^H:, I think that's <OTbs>, and :KB=nws1200: --esr) 6181news28|sony vt100 emulator 28 lines, 6182 OTbs, 6183 lines#28, 6184 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;28r\E8, 6185 use=news-old-unk, 6186# 6187# (news29: this had :TY=ascii:KB=nws1200:\ --esr) 6188news29|news28-a|sony vt100 emulator 29 lines, 6189 lines#29, 6190 is2=\E7\E[r\E8\EE\EE\EE\EM\EM\EM\E[?7h\E[?1l\E[?3l\E7\E[1;29r\E8, 6191 use=news-old-unk, 6192# 6193# (news511: this had :TY=sjis: --esr) 6194nwp511|nwp-511|nwp-511 vt100, 6195 OTbs, OTpt, am, xenl, 6196 cols#80, lines#24, 6197 clear=\E[;H\E[2J$<20/>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 6198 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A$<2/>, dl1=\E[M, 6199 ed=\E[J$<30/>, el=\E[K$<3/>, 6200 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, 6201 il1=\E[L, is2=\E[?5l\E[?1l\E>\E[?7h\E[?8h, kcub1=\E[D, 6202 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, 6203 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\E#W, khome=\E[H, 6204 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 6205 rs2=\E7\E[r\E8\E[?5l\E[?1l\E>\E[?7h\E[?8h, 6206 smso=\E[7m$<2/>, smul=\E[4m$<2/>, 6207# (news517: this had :TY=sjis:. --esr) 6208nwp517|nwp-517|nwp-517 vt200 80 cols 30 rows, 6209 eslok, hs, 6210 cols#80, lines#30, 6211 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 6212 is2=\E7\E[r\E8\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 6213 tsl=\E[1$}\E[;%df, use=vt200, 6214# (news517-w: this had :TY=sjis:. --esr) 6215nwp517-w|nwp-517-w|nwp-517 vt200 132 cols 50 rows, 6216 eslok, hs, 6217 cols#132, lines#50, 6218 OTi2=\E[2$~\n, dsl=\E[1$~, fsl=\E[0$}, 6219 is2=\E7\E[r\E8\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 6220 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, 6221 tsl=\E[1$}\E[;%df, use=vt200, 6222 6223#### Common Desktop Environment 6224# 6225 6226# This ships with Sun's CDE in Solaris 2.5 6227# Corrected Sun Aug 9 1998 by Alexander V. Lukyanov <lav@video.yars.free.net> 6228dtterm|CDE desktop terminal, 6229 am, mir, msgr, xenl, xon, 6230 cols#80, it#8, lines#24, lm#0, ncv@, 6231 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 6232 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 6233 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 6234 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 6235 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 6236 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 6237 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 6238 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 6239 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, home=\E[H, 6240 ht=^I, hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 6241 ind=\ED, invis=\E[8m, is2=\E F\E>\E[?1l\E[?7h\E[?45l, 6242 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 6243 kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~, 6244 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 6245 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 6246 kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~, 6247 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 6248 kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 6249 kslt=\E[4~, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 6250 rmam=\E[?7l, rmir=\E[4l, rmso=\E[22;27m, rmul=\E[24m, 6251 sc=\E7, 6252 sgr=\E[0%?%p1%t;2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 6253 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 6254 smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, use=ecma+color, 6255 6256######## Non-Unix Consoles 6257# 6258 6259#### EMX termcap.dat compatibility modes 6260# 6261# Also (possibly only EMX, so we don't put it in ansi.sys, etc): set the 6262# no_color_video to inform the application that standout(1), underline(2) 6263# reverse(4) and invisible(64) don't work with color. 6264emx-base|DOS special keys, 6265 bce, bw, 6266 it#8, ncv#71, 6267 bel=^G, use=ansi.sys, 6268 6269# Except for the "-emx" suffixes, these are as distributed with EMX 0.9b, 6270# a Unix-style environment used on OS/2. (Note that the suffix makes some 6271# names longer than 14 characters, the nominal maximum). 6272# 6273# Removed: rmacs=\E[10m, smacs=\E[11m, because OS/2 does not implement acs. 6274ansi-emx|ANSI.SYS color, 6275 am, bce, eo, mir, msgr, xon, 6276 colors#8, cols#80, it#8, lines#25, pairs#64, 6277 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 6278 clear=\E[1;33;44m\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, 6279 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 6280 dch=\E[%p1%dp, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, 6281 home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, ind=^J, 6282 kb2=\E[G, kbs=^H, kf0=\0D, kll=\0O, kspd=^Z, nel=^M^J, 6283 rev=\E[5;37;41m, rmir=\E[4l, rmpch=\E[10m, 6284 rmso=\E[0;44m\E[1;33m, rmul=\E[0;44m\E[1;33m, rs1=\Ec, 6285 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 6286 sgr0=\E[0m\E[1;33;44m, smir=\E[4h, smpch=\E[11m, 6287 smso=\E[0;31;47m, smul=\E[1;31;44m, tbc=\E[3g, u8=\E[?6c, 6288 u9=\E[c, use=emx-base, 6289# nice colors for Emacs (white on blue, mode line white on cyan) 6290ansi-color-2-emx|ANSI.SYS color 2, 6291 clear=\E[0;37;44m\E[H\E[J, rev=\E[1;37;46m, 6292 rmso=\E[0;37;44m, rmul=\E[0;37;44m, rs1=\Ec, 6293 setaf=\E[3%p1%dm, sgr0=\E[0;37;44m, smso=\E[1;37;46m, 6294 smul=\E[1;36;44m, use=ansi-emx, 6295# nice colors for Emacs (white on black, mode line black on cyan) 6296ansi-color-3-emx|ANSI.SYS color 3, 6297 clear=\E[0;37;40m\E[H\E[J, rev=\E[1;37;46m, 6298 rmso=\E[0;37;40m, rmul=\E[0;37;40m, rs1=\Ec, 6299 setaf=\E[3%p1%dm, sgr0=\E[0;10m, smso=\E[1;37;46m, 6300 smul=\E[0;36;40m, use=ansi-emx, 6301mono-emx|stupid monochrome ansi terminal with only one kind of emphasis, 6302 am, 6303 cols#80, it#8, lines#24, 6304 clear=\E[H\E[2J$<50>, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 6305 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 6306 ht=^I, kb2=\E[G, kbs=^H, kcub1=\0K, kcud1=\0P, kcuf1=\0M, 6307 kcuu1=\0H, kf0=\0D, kf1=\0;, kf2=\0<, kf3=\0=, kf4=\0>, 6308 kf5=\0?, kf6=\0@, kf7=\0A, kf8=\0B, kf9=\0C, khome=\0G, 6309 kich1=\0R, kll=\0O, knp=\0Q, kpp=\0I, nel=^M^J, rev=\E[7m, 6310 sgr0=\E[0m, 6311 6312#### Cygwin 6313 6314# Use this for cygwin32 (tested with beta 19.1) 6315# underline is colored bright magenta 6316# shifted kf1-kf12 are kf11-kf22 6317cygwinB19|ansi emulation for cygwin32, 6318 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 6319 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 6320 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 6321 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 6322 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 6323 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 6324 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, rmam@, smam@, 6325 use=ansi.sys, 6326 6327# Use this for cygwin (tested with version 1.1.0). 6328# I've combined pcansi and linux. Some values of course were different and 6329# I've indicated which of these were and which I used. 6330# Cheers, earnie_boyd@yahoo.com 6331# several changes based on running with tack and comparing with older entry -TD 6332# more changes from csw: 6333# add cbt [backtab] 6334# remove eo [erase overstrike with blank] 6335# change clear was \E[H\E[J now \E[2J (faster?) 6336# remove cols 6337# remove lines 6338# remove ncv#3 [colors collide with highlights, bitmask] not applicable 6339# to MSDOS box? 6340# add cub [cursor back param] 6341# add cuf [cursor forward param] 6342# add cuu [cursor up param] 6343# add cud [cursor down param] 6344# add hs [has status line] 6345# add fsl [return from status line] 6346# add tsl [go to status line] 6347# add smacs [Start alt charset] (not sure if this works) 6348# add rmacs [End alt charset] (ditto) 6349# add smcup [enter_ca_mode] (save console; thanks Corinna) 6350# add rmcup [exit_ca_mode] (restore console; thanks Corinna) 6351# add kb2 [center of keypad] 6352# add u8 [user string 8] \E[?6c 6353# add el [clear to end of line] \E[K 6354# Notes: 6355# cnorm [make cursor normal] not implemented 6356# flash [flash] not implemented 6357# blink [blink] not implemented very usefully in cygwin? \E[5m 6358# dim [dim] not implemented very usefully in cygwin? \E[2m 6359# cub1 [cursor back 1] typically \E[D, but ^H is faster? 6360# kNXT [shifted next key] not implemented 6361# kPRV [shifted prev key] not implemented 6362# khome [home key] really is \E[1~ NOT \E[H 6363# tbc [clear tab stops] not implemented 6364# xenl [newline ignnored after 80 cols] messes up last line? Ehud Karni 6365# smpch [Start PC charset] is \E[11m, same as smacs 6366# rmpch [End PC charset] is \E[10m, same as rmacs 6367# mir [move in insert mode] fails in tack? 6368# bce [back color erase] causes problems with change background color? 6369# cvvis [make cursor very visible] causes a stackdump when testing with 6370# testcurs using the output option? \E[?25h\E[?8c 6371# civis [make cursor invisible] causes everything to stackdump? \E[?25l\E[?1c 6372# ech [erase characters param] broken \E[%p1%dX 6373# kcbt [back-tab key] not implemented in cygwin? \E[Z 6374# 6375# 2005/11/12 -TD 6376# Remove cbt since it does not work in current cygwin 6377# Add 'mir' and 'in' flags based on tack 6378cygwin|ansi emulation for Cygwin, 6379 am, hs, mir, msgr, xon, 6380 colors#8, it#8, pairs#64, 6381 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 6382 bel=^G, bold=\E[1m, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, 6383 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 6384 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 6385 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 6386 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, fsl=^G, home=\E[H, 6387 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 6388 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, kb2=\E[G, 6389 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 6390 kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, kf10=\E[21~, 6391 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 6392 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 6393 kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, kf3=\E[[C, kf4=\E[[D, 6394 kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 6395 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kspd=^Z, 6396 nel=^M^J, op=\E[39;49m, rc=\E8, rev=\E[7m, ri=\EM, 6397 rmacs=\E[10m, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l, 6398 rmpch=\E[10m, rmso=\E[27m, rmul=\E[24m, rs1=\Ec\E]R, 6399 sc=\E7, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 6400 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;11%;m, 6401 sgr0=\E[0;10m, smacs=\E[11m, smcup=\E7\E[?47h, 6402 smir=\E[4h, smpch=\E[11m, smso=\E[7m, smul=\E[4m, tsl=\E];, 6403 vpa=\E[%i%p1%dd, use=vt102+enq, 6404 6405# I've supplied this so that you can help test new values and add other 6406# features. Cheers, earnie_boyd@yahoo.com. 6407# 6408# Some features are from pcansi. The op value is from linux. Function-keys 6409# are from linux. These have been tested not to cause problems. xenl was in 6410# this list, but DOES cause problems so it has been removed 6411cygwinDBG|Debug Version for Cygwin, 6412 am, eo, mir, msgr, xon, 6413 colors#8, cols#80, it#8, lines#24, ncv#3, pairs#64, 6414 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 6415 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 6416 cnorm=\E[?25h, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 6417 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 6418 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 6419 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 6420 dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 6421 flash=\E[?5h\E[?5l$<200/>, home=\E[H, hpa=\E[%i%p1%dG, 6422 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 6423 il1=\E[L, ind=^J, invis=\E[8m, kNXT=\E[6$, kPRV=\E[5$, 6424 kb2=\E[G, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 6425 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kend=\E[4~, kf1=\E[[A, 6426 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 6427 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 6428 kf18=\E[32~, kf19=\E[33~, kf2=\E[[B, kf20=\E[34~, 6429 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 6430 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 6431 knp=\E[6~, kpp=\E[5~, kspd=^Z, nel=^M^J, op=\E[39;49m, 6432 rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E[10m, rmir=\E[4l, 6433 rmso=\E[m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, 6434 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 6435 sgr=\E[0;10%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;%?%p9%t;12%;m, 6436 sgr0=\E[0;10m, smacs=\E[11m, smir=\E[4h, smso=\E[7m, 6437 smul=\E[4m, tbc=\E[3g, vpa=\E[%i%p1%dd, use=vt102+enq, 6438 6439#### DJGPP 6440 6441# Key definitions: 6442# The encodings for unshifted arrow keys, F1-F12, Home, Insert, etc. match the 6443# encodings used by other x86 environments. All others are invented for DJGPP. 6444# Oddly enough, while several combinations of modifiers are tabulated, there is 6445# none for shifted cursor keys. 6446# 6447# F1 \E[[A 6448# F2 \E[[B 6449# F3 \E[[C 6450# F4 \E[[D 6451# F5 \E[[E 6452# F6 \E[17~ 6453# F7 \E[18~ 6454# F8 \E[19~ 6455# F9 \E[20~ 6456# F10 \E[21~ 6457# F11 \E[23~ 6458# F12 \E[24~ 6459# 6460# Delete \E[3~ 6461# Down Arrow \E[B 6462# End \E[4~ 6463# Home \E[1~ 6464# Insert \E[2~ 6465# Left Arrow \E[D 6466# Page Down \E[6~ 6467# Page Up \E[5~ 6468# Right Arrow \E[C 6469# Up Arrow \E[A 6470# 6471# Shift-F1 \E[25~ 6472# Shift-F2 \E[26~ 6473# Shift-F3 \E[27~ 6474# Shift-F4 \E[28~ 6475# Shift-F5 \E[29~ 6476# Shift-F6 \E[30~ 6477# Shift-F7 \E[31~ 6478# Shift-F8 \E[32~ 6479# Shift-F9 \E[33~ 6480# Shift-F10 \E[34~ 6481# Shift-F11 \E[35~ 6482# Shift-F12 \E[36~ 6483# 6484# Ctrl-F1 \E[47~ 6485# Ctrl-F2 \E[48~ 6486# Ctrl-F3 \E[49~ 6487# Ctrl-F4 \E[50~ 6488# Ctrl-F5 \E[51~ 6489# Ctrl-F6 \E[52~ 6490# Ctrl-F7 \E[53~ 6491# Ctrl-F8 \E[54~ 6492# Ctrl-F9 \E[55~ 6493# Ctrl-F10 \E[56~ 6494# Ctrl-F11 \E[57~ 6495# Ctrl-F12 \E[58~ 6496# 6497# Ctrl-Delete \E[43~ 6498# Ctrl-Down Arrow \E[38~ 6499# Ctrl-End \E[44~ 6500# Ctrl-Home \E[41~ 6501# Ctrl-Insert \E[42~ 6502# Ctrl-Left Arrow \E[39~ 6503# Ctrl-Page Down \E[46~ 6504# Ctrl-Page Up \E[45~ 6505# Ctrl-Right Arrow \E[40~ 6506# Ctrl-Up Arrow \E[37~ 6507# 6508# Alt-F1 \E[59~ 6509# Alt-F2 \E[60~ 6510# Alt-F3 \E[61~ 6511# Alt-F4 \E[62~ 6512# Alt-F5 \E[63~ 6513# Alt-F6 \E[64~ 6514# Alt-F7 \E[65~ 6515# Alt-F8 \E[66~ 6516# Alt-F9 \E[67~ 6517# Alt-F10 \E[68~ 6518# Alt-F11 \E[79~ 6519# Alt-F12 \E[80~ 6520# 6521# Alt-Delete \E[65~ 6522# Alt-Down Arrow \E[60~ 6523# Alt-End \E[66~ 6524# Alt-Home \E[41~ 6525# Alt-Insert \E[64~ 6526# Alt-Left Arrow \E[61~ 6527# Alt-Page Down \E[68~ 6528# Alt-Page Up \E[67~ 6529# Alt-Right Arrow \E[62~ 6530# Alt-Up Arrow \E[59~ 6531# 6532# Also: 6533# Alt-A \E[82~ 6534# Alt-B \E[82~ 6535# Alt-C \E[83~ 6536# Alt-D \E[84~ 6537# Alt-E \E[85~ 6538# Alt-F \E[86~ 6539# Alt-G \E[87~ 6540# Alt-H \E[88~ 6541# Alt-I \E[89~ 6542# Alt-J \E[90~ 6543# Alt-K \E[91~ 6544# Alt-L \E[92~ 6545# Alt-M \E[93~ 6546# Alt-N \E[94~ 6547# Alt-O \E[95~ 6548# Alt-P \E[96~ 6549# Alt-Q \E[97~ 6550# Alt-R \E[98~ 6551# Alt-S \E[99~ 6552# Alt-T \E[100~ 6553# Alt-U \E[101~ 6554# Alt-V \E[102~ 6555# Alt-W \E[103~ 6556# Alt-X \E[104~ 6557# Alt-Y \E[105~ 6558# Alt-Z \E[106~ 6559djgpp|ansi emulation for DJGPP alpha, 6560 am, bce, msgr, xhp, xon, xt, 6561 colors#8, it#8, pairs#64, 6562 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 6563 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, 6564 clear=\E[H\E[J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, cub1=^H, 6565 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 6566 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 6567 cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 6568 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, 6569 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, 6570 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 6571 indn=\E[%p1%dS, invis=\E[8m, kbs=^H, kcub1=\E[D, 6572 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, 6573 kend=\E[4~, kf1=\E[[A, kf10=\E[21~, kf11=\E[23~, 6574 kf12=\E[24~, kf2=\E[[B, kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, 6575 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 6576 khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, nel=^M^J, 6577 op=\E[37;40m, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, 6578 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 6579 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%e;25%;%?%p6%t;1%;%?%p7%t;8%;m, 6580 sgr0=\E[m, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 6581 6582djgpp203|Entry for DJGPP 2.03, 6583 OTbs, am, 6584 cols#80, it#8, lines#25, 6585 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, 6586 kcud1=^J, nel=^M^J, 6587 6588djgpp204|Entry for DJGPP 2.04, 6589 OTbs, am, AX, 6590 colors#8, cols#80, it#8, lines#25, ncv#3, pairs#64, 6591 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[1v, 6592 clear=\E[H\E[2J, cnorm=\E[v, cr=^M, cub=\E[%p1%dD, 6593 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 6594 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 6595 cuu1=\E[A, cvvis=\E[2v, dch=\E[%p1%dP, dch1=\E[P, 6596 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 6597 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 6598 il1=\E[L, ind=\E[S, indn=\E[%p1%dS, invis=\E[8m, kbs=^H, 6599 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 6600 kdch1=\E[3~, kf0=\E[21~, kf1=\E[[A, kf10=\E[21~, kf2=\E[[B, 6601 kf3=\E[[C, kf4=\E[[D, kf5=\E[[E, kf6=\E[17~, kf7=\E[18~, 6602 kf8=\E[19~, kf9=\E[20~, khome=\E[1~, kich1=\E[2~, 6603 kll=\E[4~, knp=\E[6~, kpp=\E[5~, nel=^M^J, rev=\E[7m, 6604 ri=\E[T, rin=\E[%p1%dT, rmso=\E[m, setab=\E[4%p1%dm, 6605 setaf=\E[3%p1%dm, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 6606 6607#### U/Win 6608 6609# This is tested using U/Win's telnet. Scrolling is omitted because it is 6610# buggy. Another odd bug appears when displaying "~" in alternate character 6611# set (the emulator spits out error messages). Compare with att6386 -TD 6612uwin|U/Win 3.2 console, 6613 am, eo, in, msgr, xenl, xon, 6614 colors#8, it#8, ncv#58, pairs#64, 6615 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260i\316j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 6616 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 6617 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, cub1=^H, cud1=^J, 6618 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 6619 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, ech=\E[%p1%dX, 6620 ed=\E[J, el=\E[K, el1=\E[1K, home=\E[H, ht=^I, hts=\EH, 6621 ich=\E[%p1%d@, ich1=\E[@, kbs=^H, kcub1=\E[D, kcud1=\E[B, 6622 kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, kend=\E[Y, kf1=\EOP, 6623 kf10=\EOY, kf11=\EOZ, kf12=\EOA, kf2=\EOQ, kf3=\EOR, 6624 kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, kf9=\EOX, 6625 khome=\E[H, kich1=\E[@, nel=^M^J, op=\E[39;49m, rc=\E8, 6626 rev=\E[7m, rmacs=\E[10m, rmir=\E[4l, rmpch=\E[10m, 6627 rmso=\E[27m, rmul=\E[m, rs1=\Ec\E]R, sc=\E7, 6628 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0;10m, 6629 smacs=\E[11m, smir=\E[4h, smpch=\E[11m, smso=\E[7m, 6630 smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n, 6631 6632#### Microsoft (miscellaneous) 6633 6634# This entry fits the Windows NT console when the _POSIX_TERM environment 6635# variable is set to 'on'. While the Windows NT POSIX console is seldom used, 6636# the Telnet client supplied with both the Windows for WorkGroup 3.11 TCP/IP 6637# stack and the Win32 (i.e., Windows 95 and Windows NT 3.1 or later) operating 6638# systems is not, and (surprise!) they match very well. 6639# 6640# See: MS Knowledge Base item Q108581, dated 13-MAY-1997, titled "Setting Up 6641# VI POSIX Editor for Windows NT 3.1". True to Microsoft form, not only 6642# are the installation instructions a pile of mind-numbing bureaucratese, 6643# but the termcap entry is actually broken and unusable as given; the :do: 6644# capability is misspelled "d". 6645# 6646# To use this, you need to a bunch of environment variables: 6647# 6648# SET _POSIX_TERM=on 6649# SET TERM=ansi 6650# SET TERMCAP=location of termcap file in POSIX file format 6651# which is case-sensitive. 6652# e.g. SET TERMCAP=//D/RESKIT35/posix/termcap 6653# SET TMP=//C/TEMP 6654# 6655# Important note: setting the TMP environment variable in POSIX style renders 6656# it incompatible with a lot of other applications, including Visual C++. So 6657# you should have a separate command window just for vi. All the other 6658# variables may be permanently set in the Control Panel\System applet. 6659# 6660# You can find out more about the restrictions of this facility at 6661# <http://www.nentug.org/unix-to-nt/ntposix.htm>. 6662# 6663# From: Federico Bianchi <bianchi@magna.cisid.unipi.it>, 15 Jan 1997 6664ansi-nt|psx_ansi|Microsoft Windows NT console POSIX ANSI mode, 6665 am, bw, msgr, 6666 cols#80, it#8, lines#25, 6667 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 6668 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 6669 home=\E[H, ht=^I, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[V, 6670 kcuf1=\E[C, kcuu1=\E[A, nel=\r\E[S, rc=\E[u, rev=\E[7m, 6671 ri=\E[T, rmso=\E[m, sc=\E[s, sgr0=\E[0m, smso=\E[7m, 6672# From: jew@venus.sunquest.com 6673# Date: 19 Feb 93 23:41:07 GMT 6674# Here's a combination of ansi and vt100 termcap 6675# entries that works nearly perfectly for me 6676# (Gateway 2000 Handbook and Microsoft Works 3.0): 6677pcmw|PC running Microsoft Works, 6678 am, xenl, 6679 cols#80, it#8, lines#24, vt#3, 6680 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 6681 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, 6682 cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 6683 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, 6684 ht=^I, hts=\EH$<2/>, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, 6685 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 6686 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\r\ED$<5/>, 6687 rc=\E8, rev=\E[7m$<2/>, rf=/usr/share/tabset/vt100, 6688 ri=\EM$<5/>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 6689 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 6690 sgr0=\E[m$<2/>, smso=\E[7m$<2/>, smul=\E[4m$<2/>, 6691 tbc=\E[3g$<2/>, 6692 6693# From: Federico Bianchi 6694# This is the entry for the OpenNT terminal. 6695# The ntconsole name is for backward compatability. 6696# This is for OpenNT 2.0 and later. 6697# Later OpenNT was renamed to Interix. 6698# 6699# Presently it is distributed by Microsoft as Services For Unix (SFU). 6700# The 3.5 beta contains ncurses 4.2 (that is header files and executables, 6701# the documentation dates from 1.9.9e) -TD 6702 6703interix|opennt|opennt-25|ntconsole|ntconsole-25|OpenNT-term compatible with color, 6704 am, bw, msgr, 6705 colors#8, cols#80, lines#25, ncv#3, pairs#64, 6706 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 6707 bel=^G, bold=\E[1m, cbt=\E[Z, clear=\E[2J, cub=\E[%p1%dD, 6708 cub1=\E[D, cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, 6709 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 6710 cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 6711 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 6712 indn=\E[%p1%dS, kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, 6713 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[M, kend=\E[U, kf0=\EFA, 6714 kf1=\EF1, kf10=\EFA, kf11=\EFB, kf12=\EFC, kf13=\EFD, 6715 kf14=\EFE, kf15=\EFF, kf16=\EFG, kf17=\EFH, kf18=\EFI, 6716 kf19=\EFJ, kf2=\EF2, kf20=\EFK, kf21=\EFL, kf22=\EFM, 6717 kf23=\EFN, kf24=\EFO, kf25=\EFP, kf26=\EFQ, kf27=\EFR, 6718 kf28=\EFS, kf29=\EFT, kf3=\EF3, kf30=\EFU, kf31=\EFV, 6719 kf32=\EFW, kf33=\EFX, kf34=\EFY, kf35=\EFZ, kf36=\EFa, 6720 kf37=\EFb, kf38=\EFc, kf39=\EFd, kf4=\EF4, kf40=\EFe, 6721 kf41=\EFf, kf42=\EFg, kf43=\EFh, kf44=\EFi, kf45=\EFj, 6722 kf46=\EFk, kf47=\EFm, kf48=\EFn, kf49=\EFo, kf5=\EF5, 6723 kf50=\EFp, kf51=\EFq, kf52=\EFr, kf53=\EFs, kf54=\EFt, 6724 kf55=\EFu, kf56=\EFv, kf57=\EFw, kf58=\EFx, kf59=\EFy, 6725 kf6=\EF6, kf60=\EFz, kf61=\EF+, kf62=\EF-, 6726 kf63=\EF\014 kf64=\EF$, kf7=\EF7, kf8=\EF8, kf9=\EF9, 6727 kich1=\E[L, kll=\E[U, knp=\E[T, kpp=\E[S, ll=\E[U, nel=^M^J, 6728 op=\E[m, rc=\E[u, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, 6729 rmcup=\E[2b\E[u\r\E[K, rmso=\E[m, rmul=\E[m, rs1=\Ec, 6730 sc=\E[s, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 6731 setb=\E[%p1%{40}%+%dm, setf=\E[%p1%{30}%+%dm, 6732 sgr0=\E[0m, smcup=\E[s\E[1b, smso=\E[7m, smul=\E[4m, 6733 6734opennt-35|ntconsole-35|OpenNT-term35 compatible with color, 6735 lines#35, use=opennt, 6736 6737opennt-50|ntconsole-50|OpenNT-term50 compatible with color, 6738 lines#50, use=opennt, 6739 6740opennt-60|ntconsole-60|OpenNT-term60 compatible with color, 6741 lines#60, use=opennt, 6742 6743opennt-100|ntconsole-100|OpenNT-term100 compatible with color, 6744 lines#100, use=opennt, 6745 6746# OpenNT wide terminals 6747opennt-w|opennt-25-w|ntconsole-w|ntconsole-25-w|OpenNT-term-w compat with color, 6748 cols#125, use=opennt, 6749 6750opennt-35-w|ntconsole-35-w|OpenNT-term35-w compatible with color, 6751 lines#35, use=opennt-w, 6752 6753opennt-50-w|ntconsole-50-w|OpenNT-term50-w compatible with color, 6754 lines#50, use=opennt-w, 6755 6756opennt-60-w|ntconsole-60-w|OpenNT-term60-w compatible with color, 6757 lines#60, use=opennt-w, 6758 6759opennt-w-vt|opennt-25-w-vt|ntconsole-w-vt|ntconsole-25-w-vt|OpenNT-term-w-vt compat with color, 6760 cols#132, use=opennt, 6761 6762# OpenNT terminals with no smcup/rmcup (names match termcap entries) 6763interix-nti|opennt-nti|opennt-25-nti|ntconsole-25-nti|OpenNT-nti compatible with color, 6764 rmcup@, smcup@, use=opennt, 6765 6766opennt-35-nti|ntconsole-35-nti|OpenNT-term35-nti compatible with color, 6767 lines#35, use=opennt-nti, 6768 6769opennt-50-nti|ntconsole-50-nti|OpenNT-term50-nti compatible with color, 6770 lines#50, use=opennt-nti, 6771 6772opennt-60-nti|ntconsole-60-nti|OpenNT-term60-nti compatible with color, 6773 lines#60, use=opennt-nti, 6774 6775opennt-100-nti|ntconsole-100-nti|OpenNT-term100-nti compatible with color, 6776 lines#100, use=opennt-nti, 6777 6778######## COMMON TERMINAL TYPES 6779# 6780# This section describes terminal classes and maker brands that are still 6781# quite common, but have proprietary command sets not blessed by ANSI. 6782# 6783 6784#### Altos 6785# 6786# Altos made a moderately successful line of UNIX boxes. In 1990 they were 6787# bought out by Acer, a major Taiwanese manufacturer of PC-clones. 6788# Acer has a web site at http://www.acer.com. 6789# 6790# Altos descriptions from Ted Mittelstaedt <tedm@agora.rain.com> 4 Sep 1993 6791# His comments suggest they were shipped with the system. 6792# 6793 6794# (altos2: had extension capabilities 6795# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 6796# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 6797# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 6798# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 6799# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ 6800# :YU=^AQ\r:YD=^AR\r:YR=^AS\r:YL=^AT\r:\ 6801# :HL=^AP\r:SP=\E[i:\ 6802# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T:\ 6803# :LO=\E[0q:LC=\E[5q:LL=\E[6q:\ 6804# Comparison with the k* capabilities makes it obvious that the c* things are 6805# shift keys. I have renamed them to keys 32 and up accordingly. Also, 6806# :sr: was given as a boolean-- esr) 6807altos2|alt2|altos-2|altos II, 6808 cols#80, it#8, lines#24, xmc#0, 6809 clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[1B, cuf1=\E[1C, 6810 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[1A, dch1=\E[P, dl1=\E[M, 6811 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 6812 if=/usr/share/tabset/vt100, il1=\E[L, ind=^J, 6813 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kDL=^Am\r, 6814 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=\E[D, 6815 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=^AM\r, kel=^AN\r, 6816 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, 6817 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 6818 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, 6819 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 6820 kf8=^AG\r, kf9=^AH\r, khome=\E[f, kil1=^AJ\r, kind=^AO\r, 6821 nel=^M^J, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 6822 smam=\E[?7h, smso=\E[7m, smul=\E[4m, 6823# (altos3: had extension capabilities 6824# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 6825# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 6826# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 6827# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 6828# :XU=^Aq\r:XD=^Ar\r:XR=^As\r:XL=^At\r:\ 6829# :HL=^AP\r:SP=\E[i:\ 6830# :IS=\E[@:DE=\E[P:IL=\E[L:NS=\E[S:PS=\E[T: 6831altos3|altos5|alt3|alt5|altos-3|altos-5|altos III or V, 6832 blink=\E[5p, ri=\EM, sgr0=\E[p, use=altos2, 6833altos4|alt4|altos-4|altos IV, 6834 use=wy50, 6835# (altos7: had extension capabilities: 6836# :GG#0:GI=\EH8:GF=\EH7:\ 6837# :c0=^A`\r:c1=^Aa\r:c2=^Ab\r:c3=^Ac\r:\ 6838# :c4=^Ad\r:c5=^Ae\r:c6=^Af\r:c7=^Ag\r:\ 6839# :c8=^Ah\r:c9=^Ai\r:cA=^Aj\r:cB=^Ak\r:\ 6840# :cC=^Al\r:cD=^Am\r:cE=^An\r:cF=^Ao\r: 6841# Comparison with the k* capabilities makes it obvious that the c* things are 6842# shift keys. I have renamed them to keys 32 and up accordingly. I have 6843# also made this entry relative to adm12 in order to give it an <sgr>. The 6844# <invis> imported by use=adm+sgr may work, let me know. -- esr) 6845altos7|alt7|altos VII, 6846 am, mir, 6847 cols#80, lines#24, xmc#0, 6848 acsc=j5k3l2m1n8q\:t4u9v=w0x6, blink=\EG2, bold=\EGt, 6849 clear=\E+^^, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 6850 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 6851 dim=\EGp, dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, il1=\EE, 6852 ind=^J, invis=\EG1, 6853 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Eu\E~2, kDL=^Am\r, 6854 kEOL=^An\r, kbs=^H, kcbt=^AK\r, kclr=^AL\r, kcub1=^H, 6855 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=^AM\r, kel=^AN\r, 6856 kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf32=^A`\r, 6857 kf33=^Aa\r, kf34=^Ab\r, kf35=^Ac\r, kf36=^Ad\r, kf37=^Ae\r, 6858 kf38=^Af\r, kf39=^Ag\r, kf4=^AC\r, kf40=^Ah\r, kf41=^Ai\r, 6859 kf42=^Aj\r, kf43=^Ak\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 6860 kf8=^AG\r, kf9=^AH\r, khome=^^, kil1=^AJ\r, kind=^AO\r, 6861 knp=\EK, kpp=\EJ, mc4=\EJ, mc5=\Ed#, nel=^M^J, ri=\Ej, 6862 rmir=\Er, smir=\Eq, use=adm+sgr, 6863altos7pc|alt7pc|altos PC VII, 6864 kend=\ET, use=altos7, 6865 6866#### Hewlett-Packard (hp) 6867# 6868# Hewlett-Packard 6869# 8000 Foothills Blvd 6870# Roseville, CA 95747 6871# Vox: 1-(916)-785-4363 (Technical response line for VDTs) 6872# 1-(800)-633-3600 (General customer support) 6873# 6874# 6875# As of March 1998, HP no longer has any terminals in production. 6876# The 700 series (22, 32, 41, 44, 92, 94, 96, 98) is still being 6877# supported (they still have parts). So are the 2392a and 2394a. 6878# See the WORKSTATION CONSOLES section for the 700s. 6879# 6880 6881# Generic HP terminal - this should (hopefully) work on any HP terminal. 6882hpgeneric|hp|hewlett-packard generic terminal, 6883 OTbs, OTpt, am, da, db, mir, xhp, 6884 cols#80, lines#24, lm#0, vt#6, 6885 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 6886 cup=\E&a%p2%dc%p1%dY$<6>, cuu1=\EA, dch1=\EP, dl1=\EM, 6887 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, il1=\EL, 6888 ind=^J, kbs=^H, kcbt=\Ei, rmir=\ER, rmso=\E&d@, rmul=\E&d@, 6889 sgr0=\E&d@, smir=\EQ, smso=\E&dJ, smul=\E&dD, tbc=\E3, 6890 vpa=\E&a%p1%dY, 6891 6892hp110|hewlett-packard model 110 portable, 6893 lines#16, use=hpgeneric, 6894 6895hp+pfk+cr|hp function keys with CR, 6896 kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, 6897 kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, 6898 6899hp+pfk-cr|hp function keys w/o CR, 6900 kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, 6901 kf8=\Ew, 6902 6903# The hp2621s use the same keys for the arrows and function keys, 6904# but not separate escape sequences. These definitions allow the 6905# user to use those keys as arrow keys rather than as function 6906# keys. 6907hp+pfk+arrows|hp alternate arrow definitions, 6908 kcub1=\Eu\r, kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1@, 6909 kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, khome=\Ep\r, kind=\Er\r, 6910 kll=\Eq\r, kri=\Es\r, 6911 6912hp+arrows|hp arrow definitions, 6913 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 6914 kind=\ES, kll=\EF, kri=\ET, 6915 6916# Generic stuff from the HP 262x series 6917# 6918hp262x|HP 262x terminals, 6919 xhp, 6920 blink=\E&dA, dch1=\EP$<2>, ed=\EJ, ht=\011$<2>, ind=\ES, 6921 invis=\E&dS, ip=$<2>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 6922 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, 6923 kich1=\EQ, kil1=\EL, kind=\ES, knp=\EU, kpp=\EV, kri=\ET, 6924 krmir=\ER, rev=\E&dB, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, 6925 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%c, 6926 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, 6927 6928# Note: no <home> on HPs since that homes to top of memory, not screen. 6929# Due to severe 2621 braindamage, the only way to get the arrow keys to 6930# transmit anything at all is to turn on the function key labels 6931# with <smkx>, and even then the user has to hold down shift! 6932# The default 2621 turns off the labels except when it has to to 6933# enable the function keys. If your installation prefers labels 6934# on all the time, or off all the time (at the "expense" of the 6935# function keys), use 2621-nl or 2621-wl. 6936# 6937# Note: there are newer ROMs for 2621's that allow you to set 6938# strap A so the regular arrow keys xmit \EA, etc, as with the 6939# 2645. However, even with this strap set, the terminal stops 6940# xmitting if you reset it, until you unset and reset the strap! 6941# Since there is no way to set/unset the strap with an escape 6942# sequence, we don't use it in the default. 6943# If you like, you can use 2621-ba (brain-damaged arrow keys). 6944hp2621-ba|2621 w/new rom and strap A set, 6945 rmkx@, smkx@, use=hp+arrows, use=hp2621, 6946 6947# hp2621 with function labels. Most of the time they are off, 6948# but inside vi, the function key labels appear. You have to 6949# hold down shift to get them to xmit. 6950hp2621|hp2621a|hp2621A|2621|2621a|2621A|hp2621-wl|2621-wl|hp 2621 w/labels, 6951 is2=\E&jA\r, rmkx=\E&jA, use=hp2621-fl, 6952hp2621-fl|hp 2621, 6953 xhp@, xon, 6954 pb#19200, 6955 cbt=\Ei, cup=\E&a%p2%dc%p1%dY, dch1=\EP$<2>, ht=\011$<2>, 6956 ip=$<2>, is2=\E&j@\r, rmkx=\E&j@, rmso=\E&d@, rmul=\E&d@, 6957 sgr0=\E&d@, smkx=\E&jB, smso=\E&dD, smul=\E&dD, 6958 use=hp+pfk+cr, use=hpgeneric, 6959 6960# To use hp2621p printer, setenv TERM=2621p, PRINTER=2612p 6961hp2621p|hp 2621 with printer, 6962 mc4=\E&p13C, mc5=\E&p11C, use=hp2621, 6963 6964hp2621p-a|hp2621p with fn as arrows, 6965 use=hp+pfk+arrows, use=hp2621p, 6966 6967# hp2621 with k45 keyboard 6968hp2621-k45|hp2621k45|k45|hp 2621 with 45 keyboard, 6969 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 6970 khome=\Eh, rmkx=\E&s0A, smkx=\E&s1A, use=hp2621, 6971 6972# 2621 using all 48 lines of memory, only 24 visible at any time. 6973hp2621-48|48 line 2621, 6974 lines#48, 6975 cup=\E&a%p2%dc%p1%dR, home=\EH, vpa=\E&a%p1%dR, 6976 use=hp2621, 6977 6978# 2621 with no labels ever. Also prevents vi delays on escape. 6979hp2621-nl|hp 2621 with no labels, 6980 kcub1@, kcud1@, kcuf1@, kcuu1@, khome@, rmkx@, smkx@, 6981 use=hp2621-fl, 6982 6983# Needed for UCB ARPAVAX console, since lsi-11 expands tabs 6984# (wrong). 6985# 6986hp2621-nt|hp 2621 w/no tabs, 6987 ht@, use=hp2621, 6988 6989# Hp 2624 B with 4 or 10 pages of memory. 6990# 6991# Some assumptions are made with this entry. These settings are 6992# NOT set up by the initialization strings. 6993# 6994# Port Configuration 6995# RecvPace=Xon/Xoff 6996# XmitPace=Xon/Xoff 6997# StripNulDel=Yes 6998# 6999# Terminal Configuration 7000# InhHndShk=Yes 7001# InhDC2=Yes 7002# XmitFnctn(A)=No 7003# InhEolWrp=No 7004# 7005# Note: the 2624 DOES have a true <home>, believe it or not! 7006# 7007# The 2624 has an "error line" to which messages can be sent. 7008# This is CLOSE to what is expected for a "status line". However, 7009# after a message is sent to the "error line", the next carriage 7010# return is EATEN and the "error line" is turned back off again! 7011# So I guess we can't define <hs>, <eslok>, <wsl>, <dsl>, <fsl>, <tsl>. 7012# 7013# This entry supports emacs (and any other program that uses raw 7014# mode) at 4800 baud and less. I couldn't get the padding right 7015# for 9600. 7016# 7017# (hp2624: replaced NUL sequences in flash with mandatory pauses -- esr) 7018hp2624|hp2624a|hp2624b|hp2624b-4p|Hewlett Packard 2624 B, 7019 da, db, 7020 lm#96, 7021 flash=\E&w13F$<66/>\E&w12F$<66/>\E&w13F$<66/>\E&w12F, 7022 use=hp+labels, use=scrhp, 7023 7024# This hp2626 entry does not use any of the fancy windowing stuff 7025# of the 2626. 7026# 7027# Indeed, terminfo does not yet handle such stuff. Since changing 7028# any window clears memory, it is probably not possible to use 7029# this for screen opt. 7030# 7031# ed is incredibly slow most of the time - I am guessing at the 7032# exact padding. Since the terminal uses xoff/xon this is intended 7033# only for cost computation, so that the terminal will prefer el 7034# or even dl1 which is probably faster! 7035# 7036# \ED\EJ\EC hack for ed from Ed Bradford - apparently ed is only 7037# extra slow on the last line of the window. 7038# 7039# The padding probably should be changed. 7040# 7041hp2626|hp2626a|hp2626p|hp 2626, 7042 da, db, 7043 lm#0, pb#19200, 7044 ed=\ED\EJ$<500>\EC, indn=\E&r%p1%dD, ip=$<4>, 7045 is2=\E&j@\r, rin=\E&r%p1%dU, use=hp+pfk-cr, 7046 use=hp+labels, use=scrhp, 7047 7048# This entry is for sysline. It allocates a 23 line window with 7049# a 115 line workspace for regular use, and a 1 line window for 7050# the status line. 7051# 7052# This assumes port 2 is being used. 7053# Turn off horizontal line, Create ws #1 with 115 lines, 7054# Create ws #2 with 1 line, Create window #1 lines 1-23, 7055# Create window #2 lines 24-24, Attach cursor to workspace #1. 7056# Note that this clears the tabs so it must be done by tset before 7057# it sets the tabs. 7058# 7059hp2626-s|hp 2626 using only 23 lines, 7060 eslok, hs, 7061 lines#23, 7062 fsl=\E&d@\E&w7f2p1I\E&w4f1I, 7063 is1=\E&q3t0{0H \E&w0f115n1I \E&w0f1n2I \E&w2f1i0d0u22l0S \E&w2f2i0d23u23l0S \E&w7f2p1I \r, 7064 tsl=\E&w7f2p2I\E&w4f2I\r\EK\E&a%p1%dC, use=hp2626, 7065# Force terminal back to 24 lines after being 23. 7066hp2626-ns|hp 2626 using all 24 lines, 7067 is1=\E&q3t0{0H \E&w0f118n1I \E&w0f1n2I \E&w2f1i0d0u23l0S \E&w3f2I \E&w7f2p1I \r, 7068 use=hp2626, 7069# Various entries useful for small windows on 2626. 7070hp2626-12|hewlett-packard 2626 12 lines, 7071 lines#12, use=hp2626, 7072hp2626-12x40|hewlett-packard 2626 12 lines 40 columns, 7073 cols#40, lines#12, use=hp2626, 7074hp2626-x40|hewlett-packard 2626 40 columns, 7075 cols#40, use=hp2626, 7076hp2626-12-s|hewlett-packard 2626 11 lines plus status, 7077 lines#11, use=hp2626-s, 7078 7079# 7080# hp2627 color tubes from University of Wisconsin 7081# 7082hp2627a-rev|hp 2627 with reverse video colors, 7083 cr=^M, cud1=^J, ht=^I, ind=^J, 7084 is2=\E&v0m1a0b0c1x1y1z1i0a0b1c1x1y1z0i0S\E&j@\r\E3\r, 7085 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmul=\E&v0S\E&d@, 7086 smul=\E&dD\E&v1S, use=hp2621-nl, 7087hp2627a|hp 2627 color terminal with no labels, 7088 cr=^M, cud1=^J, ht=^I, ind=^J, 7089 is2=\E&v0m1a1b0c1i0a1b1c2i1a0b0c0i0S\E&j@\r\E3\r, 7090 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rmso=\E&v0S, 7091 rmul=\E&v0S\E&d@, smso=\E&v2S, smul=\E&dD\E&v1S, 7092 use=hp2621-nl, 7093hp2627c|hp 2627 color (cyan) terminal with no labels, 7094 cr=^M, cud1=^J, ht=^I, ind=^J, 7095 is2=\E&v0m1a0b0c2i1a1b0c1i0a1b1c0i0S\E&j@\r\E3\r, 7096 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, use=hp2627a, 7097 7098# hp2640a doesn't have the Y cursor addressing feature, and C is 7099# memory relative instead of screen relative, as we need. 7100# 7101hp2640a|hp 2640a, 7102 cup@, rmkx@, smkx@, use=hp2645, 7103 7104hp2640b|hp2644a|hp 264x series, 7105 rmkx@, smkx@, use=hp2645, 7106 7107# (hp2641a: removed unknown :gu: -- esr) 7108hp2641a|hp2645a|hp2647a|HP 264?A series BRL entry, 7109 am, da, db, mir, xhp, 7110 cols#80, lines#24, 7111 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 7112 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 7113 ed=\EJ, el=\EK, hpa=\E&a%p1%2dC, ht=^I, 7114 if=/usr/share/tabset/std, il1=\EL, ind=^J, 7115 is2=\EE$<500/>, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 7116 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, 7117 vpa=\E&a%p1%2dY, 7118 7119# This terminal should be used at 4800 baud or less. It needs padding for 7120# plain characters at 9600, I guessed at an appropriate cr delay. It really 7121# wants ^E/^F handshaking, but that doesn't work well even if you write 7122# software to support it. 7123hp2645|hp45|HP 2645 series, 7124 pb#9600, 7125 blink=\E&dA, cr=\r$<20>, dim=\E&dH, kctab=\E2, kcub1=\ED, 7126 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 7127 ked=\EJ, kel=\EK, khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, 7128 kind=\ES, knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, rev=\E&dB, 7129 rmkx=\E&s0A, 7130 sgr=\E&d%{64}%?%p1%t%{66}%|%;%?%p2%t%{68}%|%;%?%p3%t%{66}%|%;%?%p4%t%{65}%|%;%?%p5%t%{72}%|%;%?%p6%t%{66}%|%;%c, 7131 sgr0=\E&d@, smkx=\E&s1A, smul=\E&dD, use=hpgeneric, 7132# You should use this terminal at 4800 baud or less. 7133hp2648|hp2648a|HP 2648a graphics terminal, 7134 clear=\EH\EJ$<50>, cup=\E&a%p2%dc%p1%dY$<20>, 7135 dch1=\EP$<7>, ip=$<5>, use=hp2645, 7136 7137# The HP 150 terminal is a fairly vanilla HP terminal, with the 7138# clreol standout problem. It also has graphics capabilities and 7139# a touch screen, which we don't describe here. 7140hp150|hewlett packard Model 150, 7141 OTbs, use=hp2622, 7142 7143# HP 2382a terminals, "the little ones." They don't have any 7144# alternate character set support and sending out ^N/^O will 7145# leave the screen blank. 7146hp2382a|hp2382|hewlett packard 2382a, 7147 da, db, 7148 lh#1, lm#48, 7149 acsc@, 7150 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, 7151 rmacs@, 7152 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c, 7153 sgr0=\E&d@, smacs@, use=hp+labels, use=scrhp, 7154 7155hp2621-a|hp2621a-a|hp2621 with fn as arrows, 7156 use=hp+pfk+arrows, use=hp2621-fl, 7157 7158# newer hewlett packard terminals 7159 7160newhpkeyboard|generic entry for HP extended keyboard, 7161 kbs=^H, kcbt=\Ei, kclr=\EJ, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 7162 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, khome=\Eh, 7163 kich1=\EQ, kil1=\EL, kind=\ET, kll=\EF, knp=\EU, kpp=\EV, 7164 kri=\ES, krmir=\ER, rmkx=\E&s0A, smkx=\E&s1A, 7165 use=hp+pfk-cr, 7166 7167newhp|generic entry for new hewlett packard terminals, 7168 am, bw, mir, xhp, xon, 7169 cols#80, lines#24, pb#4800, 7170 acsc=2[3@4>5I9(\:'JSKWLQMAO#P$Q;R!S"T1U2V4W3X\:Y+Z*dHjGkTlRmFn/q\,t5u6v8w7x., 7171 bel=^G, blink=\E&dA, bold=\E&dF, cbt=\Ei, cr=^M, cub1=^H, 7172 cud1=^J, cuf1=\EC, cuu1=\EA, dch1=\EP$<2>, dim=\E&dH, 7173 dl1=\EM, ed=\EJ, el=\EK, ht=\011$<2>, hts=\E1, il1=\EL, ind=^J, 7174 invis=\E&dS, ip=$<2>, is1=\E&jB$<8>, nel=^M^J, 7175 pfkey=\E&f0a%p1%dk0d%p2%l%dL%p2%s, 7176 pfloc=\E&f1a%p1%dk0d%p2%l%dL%p2%s, 7177 pfx=\E&f2a%p1%dk0d%p2%l%dL%p2%s, rev=\E&dB, ri=\ET, 7178 rmacs=^O, rmir=\ER, rmso=\E&d@, rmul=\E&d@, rs1=\Eg, 7179 sgr=\E&d%{0}%Pa%?%p4%t%{1}%ga%+%Pa%;%?%p1%p3%|%p6%|%t%{2}%ga%+%Pa%;%?%p2%p6%|%t%{4}%ga%+%Pa%;%?%p1%p5%|%t%{8}%ga%+%Pa%;%?%p7%t%?%ga%ts%ga%{64}%+%e%{83}%;%e%?%ga%t%ga%{64}%+%e%{64}%;%;%c%?%p9%t\016%e\017%;, 7180 sgr0=\E&d@\017, smacs=^N, smir=\EQ, smso=\E&dJ, smul=\E&dD, 7181 tbc=\E3, use=newhpkeyboard, 7182 7183memhp|memory relative addressing for new HP ttys, 7184 vt#6, 7185 clear=\EH\EJ$<40>, cub=\E&a-%p1%dC, cud=\E&a+%p1%dR, 7186 cuf=\E&a+%p1%dC, cup=\E&a%p1%dr%p2%dC, cuu=\E&a-%p1%dR, 7187 home=\EH, hpa=\E&a%p1%dC, ll=\E&a23R\r, 7188 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dR, use=newhp, 7189 7190scrhp|screen relative addressing for new HP ttys, 7191 clear=\E&a0c0Y\EJ$<40>, cub=\E&a-%p1%dC, 7192 cud=\E&a+%p1%dR, cuf=\E&a+%p1%dC, 7193 cup=\E&a%p1%dy%p2%dC$<10>, cuu=\E&a-%p1%dR, 7194 home=\E&a0y0C, hpa=\E&a%p1%dC, ll=\E&a0y0C\EA, 7195 mrcup=\E&a%p1%dr%p2%dC, vpa=\E&a%p1%dY, use=newhp, 7196 7197# (hp+labels: added label values from a BRL termcap -- esr) 7198hp+labels|"standard" label info for new HP ttys, 7199 lh#2, lw#8, nlab#8, 7200 lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, 7201 pln=\E&f2a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d0L%?%ga%!%t %;%p2%s, 7202 rmln=\E&j@, smln=\E&jB, 7203 7204hp+printer|"standard" printer info for HP ttys, 7205 ff=\E&p4u0C, mc0=\EH\E&p4dF, mc4=\E&p13C, mc5=\E&p11C, 7206 7207 7208# The new hp2621b is kind of a cross between the old 2621 and the 7209# new 262x series of machines. It has dip-switched options. 7210# The firmware has a bug in it such that if you give it a null 7211# length label, the following character is eaten! 7212hp2621b|hp 2621b with old style keyboard, 7213 lh#1, lm#48, lw#8, nlab#8, 7214 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 7215 kind=\ET, kll=\EF, kri=\ES, 7216 pln=\E&f0a%p1%dk%p2%l%Pa%?%ga%t%ga%d%e1%;d3L%?%ga%!%t%{32}%c%;%p2%s\E%{111}%p1%+%c\r, 7217 smln=\E&jB, use=hp2621, 7218 7219hp2621b-p|hp 2621b with printer, 7220 use=hp+printer, use=hp2621b, 7221 7222# hp2621b - new 2621b with new extended keyboard 7223# these are closer to the new 26xx series than the other 2621b 7224hp2621b-kx|hp 2621b with extended keyboard, 7225 use=newhpkeyboard, use=hp2621b, 7226 7227hp2621b-kx-p|hp 2621b with new keyboard & printer, 7228 use=hp+printer, use=hp2621b-kx, 7229 7230# Some assumptions are made in the following entries. 7231# These settings are NOT set up by the initialization strings. 7232# 7233# Port Configuration 7234# RecvPace=Xon/Xoff XmitPace=Xon/Xoff StripNulDel=Yes 7235# 7236# Terminal Configuration 7237# InhHndShk(G)=Yes InhDC2(H)=Yes 7238# XmitFnctn(A)=No InhEolWrp=No 7239# 7240# 7241# Hp 2622a & hp2623a display and graphics terminals 7242# 7243hp2622|hp2622a|hp 2622, 7244 da, db, 7245 lm#0, pb#19200, 7246 is2=\E&dj@\r, use=hp+pfk-cr, use=hp+labels, use=scrhp, 7247 7248# The 2623 is a 2622 with extra graphics hardware. 7249hp2623|hp2623a|hp 2623, 7250 use=hp2622, 7251 7252hp2624b-p|hp2624b-4p-p|hewlett packard 2624 B with printer, 7253 use=hp+printer, use=hp2624, 7254 7255# The hewlett packard B can have an optional extra 6 pages of memory. 7256hp2624-10p|hp2624a-10p|hp2624b-10p|hewlett packard 2624 B w/ 10 pages of memory, 7257 lm#240, use=hp2624, 7258 7259hp2624b-10p-p|hewlett packard 2624 B w/ extra memory & printer, 7260 lm#240, use=hp2624b-p, 7261 7262# Color manipulations for HP terminals 7263hp+color|hp with colors, 7264 ccc, 7265 colors#16, ncv#17, pairs#7, 7266 initp=\E&v%?%p2%{1000}%=%t1%e.%p2%d%;a%?%p3%{1000}%=%t1%e.%p3%d%;b%?%p4%{1000}%=%t1%e.%p4%d%;c%?%p5%{1000}%=%t1%e.%p5%d%;x%?%p6%{1000}%=%t1%e.%p6%d%;y%?%p7%{1000}%=%t1%e.%p7%d%;z%p1%dI, 7267 oc=\E&v0m1a1b1c0I\E&v1a1I\E&v1b2I\E&v1a1b3I\E&v1c4I\E&v1a1c5I\E&v1b1c6I\E&v1x1y7I, 7268 op=\E&v0S, scp=\E&v%p1%dS, 7269 7270# <is2> sets the screen to be 80 columns wide 7271hp2397a|hp2397|hewlett packard 2397A color terminal, 7272 is2=\E&w6f80X, use=memhp, use=hp+labels, use=hp+color, 7273 7274# HP 700/44 Setup parameters: 7275# Terminal Mode HP-PCterm 7276# Inhibit Auto Wrap NO 7277# Status Line Host Writable 7278# PC Character Set YES 7279# Twenty-Five Line Mode YES 7280# XON/XOFF @128 or 64 (sc) 7281# Keycode Mode NO or YES (sc) 7282# Backspace Key BS or BS/DEL 7283# 7284# <is2> sets pcterm; autowrap; 25 lines; pc char set; prog DEL key; 7285# \E\\? does not turn off keycode mode 7286# <smsc> sets alternate start/stop; keycode on 7287hpansi|hp700|hewlett packard 700/44 in HP-PCterm mode, 7288 am, eo, xenl, xon, 7289 cols#80, lines#25, 7290 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 7291 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[2J\E[H, 7292 cnorm=\E[?25h, cr=^M, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 7293 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 7294 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, 7295 ind=^J, 7296 is2=\E[44"p\E[?7h\E[>10h\E[>12h\EP1;1|3/7F\E\\, 7297 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 7298 kcuu1=\E[A, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, 7299 kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, 7300 kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, khome=\E[1~, knp=\E[6~, 7301 kpp=\E[5~, rmam=\E[?7l, 7302 rmsc=\E[>11l\EP1**x0/11;1/13\E[m\E\\, rmso=\E[m, 7303 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, 7304 smsc=\E[>11h\EPO**x0/65;1/67\E\\$<250>, smso=\E[7m, 7305 smul=\E[4m, xoffc=g, xonc=e, 7306# 7307# (hp2392: copied <rmir> here from hpex -- esr) 7308hp2392|239x series, 7309 cols#80, 7310 cbt=\Ei, cup=\E&a%p1%dy%p2%dC, kf1=\Ep\r, kf2=\Eq\r, 7311 kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, 7312 kf8=\Ew\r, khome=\Eh, kind=\EU, knp=\Eu, kpp=\Ev, kri=\EV, 7313 rmir=\ER, rmul=\E&d@, smir=\EQ, smul=\E&dD, vpa=\E&a%p1%dY, 7314 use=hpsub, 7315 7316hpsub|hp terminals -- capability subset, 7317 am, da, db, mir, xhp, xon, 7318 lines#24, 7319 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 7320 cuu1=\EA, dch1=\EP, dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, 7321 ht=^I, if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, 7322 is2=\E&s1A\E<\E&k0\\, kbs=^H, kcub1=\ED, kcud1=\EB, 7323 kcuf1=\EC, kcuu1=\EA, khome=\Eh, rmkx=\E&s0A, rmso=\E&d@, 7324 sgr0=\E&d@, smkx=\E&s1A, smso=\E&dB, 7325 7326# hpex: 7327# May be used for most 24 x 80 hp terminals, 7328# but has no padding added, so may allow runover in some terminals at high 7329# baud rates. Will not work for hp2640a or hp2640b terminals, hp98x6 and 7330# hp98x5 terminal emulators or hp98x6 consoles. 7331# Adds xy-cursor addressing, vertical cursor addressing, home, 7332# last line, and underline capabilities. 7333# 7334# (hpex: removed memory-lock capabilities ":ml=\El:mu=\Em:", 7335# moved <rmir> here from hpsub -- esr) 7336hpex|hp extended capabilites, 7337 cr=^M, cud1=^J, cup=\E&a%p1%dy%p2%dC, ht=^I, ind=^J, kbs=^H, 7338 kcub1=^H, kcud1=^J, nel=^M^J, rmir=\ER, rmul=\E&d@, smir=\EQ, 7339 smul=\E&dD, vpa=\E&a%p1%dY, use=hpsub, 7340 7341# From: Ville Sulko <Ville.Sulko@bip.atk.tpo.fi>, 05 Aug 1996 7342hp2|hpex2|hewlett-packard extended capabilities newer version, 7343 am, da, db, mir, xhp, 7344 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, xmc#0, 7345 bel=^G, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, 7346 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 7347 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 7348 il1=\EL, ind=^J, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, 7349 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 7350 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 7351 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, 7352 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, 7353 krmir=\ER, ktbc=\E3, meml=\El, memu=\Em, 7354 pfkey=\E&f%p1%dk%p2%l%dL%p2%s, 7355 pfloc=\E&f1a%p1%dk%p2%l%dL%p2%s, 7356 pfx=\E&f2a%p1%dk%p2%l%dL%p2%s, 7357 pln=\E&f%p1%dk%p2%l%dd0L%p2%s, rmir=\ER, rmkx=\E&s0A, 7358 rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, 7359 sgr=\E&d%?%p7%t%{115}%c%;%p1%p3%|%p6%|%{2}%*%p2%{4}%*%+%p4%+%p5%{8}%*%+%{64}%+%c%?%p9%t%'\016'%c%e%'\017'%c%;, 7360 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smln=\E&jB, smso=\E&dB, 7361 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 7362 7363# HP 236 console 7364# From: <ddavis@ic.berkeley.edu> 7365hp236|hp236 internal terminal emulator, 7366 OTbs, am, 7367 cols#80, lines#24, 7368 clear=\EF, cnorm=\EDE, cub1=^H, 7369 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\EDB, 7370 dch1=\EJ, dl1=\EH, el=\EK, ich1=\EI, il1=\EG, rmso=\ECI, 7371 sgr0=\ECI, smso=\EBI, 7372 7373# This works on a hp300 console running Utah 4.3 BSD 7374# From: Craig Leres <leres@okeeffe.berkeley.edu> 7375hp300h|HP Catseye console, 7376 OTbs, am, da, db, mir, xhp, 7377 cols#128, lines#51, lm#0, xmc#0, 7378 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, cud1=\EB, 7379 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 7380 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, 7381 if=/usr/share/tabset/stdcrt, il1=\EL, ind=^J, kbs=^H, 7382 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\Eh, 7383 rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, 7384 smir=\EQ, smkx=\E&s1A, smso=\E&dB, smul=\E&dD, tbc=\E3, 7385 vpa=\E&a%p1%dY, 7386# From: Greg Couch <gregc@ernie.berkeley.edu> 7387hp9837|hp98720|hp98721|HP 9000/300 workstations, 7388 OTbs, am, da, db, mir, xhp, 7389 cols#128, it#8, lines#46, lm#0, 7390 bel=^G, cbt=\Ei, clear=\E&a0y0C\EJ, cub1=^H, cud1=\EB, 7391 cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, 7392 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 7393 il1=\EL, ind=^J, is2=\E&v0m1b0i&j@, kbs=^H, kcub1=\ED, 7394 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 7395 ked=\EJ, kel=\EK, khome=\Eh, kich1=\EQ, kil1=\EL, knp=\EU, 7396 kpp=\EV, rmir=\ER, rmkx=\E&s0A, rmso=\E&v0S, rmul=\E&d@, 7397 sgr0=\E&d@, smir=\EQ, smkx=\E&s1A, smso=\E&v5S, smul=\E&dD, 7398 tbc=\E3, vpa=\E&a%p1%dY, 7399# HP 9845 desktop computer from BRL 7400# (hp9845: removed unknown capability :gu: -- esr) 7401hp9845|HP 9845, 7402 OTbs, am, da, db, eo, mir, xhp, 7403 cols#80, lines#21, 7404 OTbc=\ED, clear=\EH\EJ, cub1=\ED, cud1=\EB, cuf1=\EC, 7405 cup=\E&a%p2%2dc%p1%2dY, cuu1=\EA, dch1=\EP, dl1=\EM, 7406 ed=\EJ, el=\EK, if=/usr/share/tabset/std, il1=\EL, 7407 rmir=\ER, rmso=\E&d@, smir=\EQ, smso=\E&dB, 7408# From: Charles A. Finnell of MITRE <finnell@mitre.org>, developed 07SEP90 7409# (hp98550: replaced /usr/share/tabset/9837 with std because <it#8>,<hts=\E1>; 7410# added empty <acsc> to avoid warnings re <smacs>/<rmacs> --esr) 7411hp98550|hp98550a|HP 9000 Series 300 color console, 7412 OTbs, am, da, db, mir, xhp, 7413 cols#128, it#8, lines#49, lm#0, 7414 acsc=, bel=^G, blink=\E&dA, bold=\E&dJ, cbt=\Ei, civis=\E*dR, 7415 clear=\EH\EJ, cnorm=\E*dQ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 7416 cup=\E&a%p1%dy%p2%dC, cuu1=\EA, dch1=\EP, dim=\E&dH, 7417 dl1=\EM, ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=^I, hts=\E1, 7418 if=/usr/share/tabset/std, il1=\EL, ind=^J, invis=\E&ds, 7419 kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 7420 kcuu1=\EA, kdch1=\EP, kdl1=\EM, ked=\EJ, kel=\EK, kf1=\Ep, 7421 kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 7422 khome=\Eh, khts=\E1, kich1=\EQ, kil1=\EL, kind=\ES, kll=\EF, 7423 knp=\EU, kpp=\EV, kri=\ET, krmir=\ER, ktbc=\E3, rev=\E&dJ, 7424 rmacs=^O, rmir=\ER, rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, 7425 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smso=\E&dJ, 7426 smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 7427# From: Victor Duchovni <vic@fine.princeton.edu> 7428# (hp700-wy: removed obsolete ":nl=^J:"; 7429# replaced /usr/share/tabset/hp700-wy with std because <it#8>,<hts=\E1> -- esr) 7430hp700-wy|HP700/41 emulating wyse30, 7431 OTbs, am, bw, mir, msgr, 7432 cols#80, it#8, lines#24, xmc#1, 7433 cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 7434 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7435 dl1=\ER, ed=\EY, el=\ET$<10/>, home=^^, ht=^I, hts=\E1, 7436 if=/usr/share/tabset/stdcrt, il1=\EE$<0.7*/>, 7437 is1=\E~"\EC\Er\E(\EG0\003\E`9\E`1, kbs=\177, kcbt=\EI, 7438 kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, ked=\EY, 7439 kel=\ET, khome=^^, khts=\EI, kich1=\Eq, krmir=\Er, ll=^^^K, 7440 ri=\Ej, rmir=\Er, rmso=\EG0$<10/>, rmul=\EG0$<10/>, 7441 sgr0=\EG0$<10/>, smir=\Eq, smso=\EG4$<10/>, 7442 smul=\EG8$<10/>, tbc=\E0, vpa=\E[%p1%{32}%+%c, 7443hp70092|hp70092a|hp70092A|HP 700/92, 7444 am, da, db, xhp, 7445 cols#80, lh#2, lines#24, lm#0, lw#8, nlab#8, 7446 acsc=0cjgktlrmfn/q\,t5u6v8w7x., bel=^G, blink=\E&dA, 7447 bold=\E&dB, cbt=\Ei, clear=\E&a0y0C\EJ, cr=^M, cub1=^H, 7448 cud1=\EB, cuf1=\EC, cup=\E&a%p1%dy%p2%dC, cuu1=\EA, 7449 dch1=\EP, dim=\E&dH, dl1=\EM, el=\EK, hpa=\E&a%p1%dC, ht=^I, 7450 hts=\E1, il1=\EL, kbs=^H, kclr=\EJ, kctab=\E2, kcub1=\ED, 7451 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EP, kdl1=\EM, 7452 ked=\EJ, kel=\EK, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 7453 kf6=\Eu, kf7=\Ev, kf8=\Ew, khome=\Eh, khts=\E1, kich1=\EQ, 7454 kil1=\EL, kind=\ES, kll=\EF, knp=\EU, kpp=\EV, kri=\ET, 7455 krmir=\ER, ktbc=\E3, rev=\E&dB, ri=\ET, rmacs=^O, rmir=\ER, 7456 rmkx=\E&s0A, rmln=\E&j@, rmso=\E&d@, rmul=\E&d@, 7457 sgr0=\E&d@, smacs=^N, smir=\EQ, smkx=\E&s1A, smln=\E&jB, 7458 smso=\E&dJ, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 7459 7460bobcat|sbobcat|HP 9000 model 300 console, 7461 am, da, db, mir, xhp, 7462 cols#128, it#8, lines#47, xmc#0, 7463 cbt=\Ei, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 7464 cup=\E&a%p1%dy%p2%dC$<6/>, cuu1=\EA, dch1=\EP, 7465 dl1=\EM$<10*/>, ed=\EJ, el=\EK, hpa=\E&a%p1%dC$<6/>, ht=^I, 7466 il1=\EL$<10*/>, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 7467 kcuf1=\EC, kcuu1=\EA, khome=\Eh, nel=^M^J, rmir=\ER, 7468 rmkx=\E&s0A, rmso=\E&d@, rmul=\E&d@, sgr0=\E&d@, smir=\EQ, 7469 smkx=\E&s1A, smso=\E&dB, smul=\E&dD, vpa=\E&a%p1%dY$<6/>, 7470gator-t|HP 9000 model 237 emulating extra-tall AAA, 7471 lines#94, use=gator, 7472gator|HP 9000 model 237 emulating AAA, 7473 bw, km, mir, ul, 7474 cols#128, it#8, lines#47, 7475 bel=^G, cbt=\E[Z, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, 7476 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, 7477 dch=\E[%p1%dP$<4/>, dch1=\E[P, dl=\E[%p1%dM$<1*/>, 7478 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%i%p1%d`, 7479 ht=^I, ich=\E[%p1%d@$<4/>, ich1=\E[@, il=\E[%p1%dL$<1*/>, 7480 il1=\E[L, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, 7481 rep=%p1%c\E[%p2%db$<1*/>, rev=\E[7m, rmso=\E[m, 7482 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 7483gator-52|HP 9000 model 237 emulating VT52, 7484 cols#128, lines#47, use=vt52, 7485gator-52t|HP 9000 model 237 emulating extra-tall VT52, 7486 lines#94, use=gator-52, 7487 7488#### Honeywell-Bull 7489# 7490# From: Michael Haardt <michael@gandalf.moria> 11 Jan 93 7491# 7492 7493# Honeywell Bull terminal. Its cursor and function keys send single 7494# control characters and it has standout/underline glitch. Most programs 7495# do not like these features/bugs. Visual bell is realized by flashing the 7496# "keyboard locked" LED. 7497dku7003-dumb|Honeywell Bull DKU 7003 dumb mode, 7498 cols#80, lines#25, 7499 clear=^]^_, cr=^M, cub1=^Y, cud1=^K, cuf1=^X, 7500 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, ed=^_, el=\E[K, 7501 flash=\E[2h\E[2l, home=^], ht=^I, ind=^J, kbs=^H, kcub1=^Y, 7502 kcud1=^K, kcuf1=^X, kcuu1=^Z, khome=^], nel=^M^J, 7503dku7003|Honeywell Bull DKU 7003 all features described, 7504 msgr, 7505 xmc#1, 7506 blink=\E[5m, bold=\E[7m, dim=\E[2m, rev=\E[7m, rmso=\E[m, 7507 rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 7508 use=dku7003-dumb, 7509 7510#### Lear-Siegler (adm) 7511# 7512# These guys are long since out of the terminals business, but 7513# in 1995 many current terminals still have an adm type as one of their 7514# emulations (usually their stupidest, and usually labeled adm3, though 7515# these `adm3' emulations normally have adm3a+ capabilities). 7516# 7517# WARNING: Some early ADM terminals (including the ADM3 and ADM5) had a 7518# `diagnostic feature' that sending them a ^G while pin 22 (`Ring Indicator') 7519# was being held to ground would trigger a send of the top line on the screen. 7520# A quick fix might be to drop back to a cheesy 4-wire cable with pin 22 7521# hanging in the air. (Thanks to Eric Fischer, <eric@fudge.uchicago.edu>, 7522# for clearing up this point.) 7523 7524adm1a|adm1|lsi adm1a, 7525 am, 7526 cols#80, lines#24, 7527 bel=^G, clear=\E;$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7528 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, home=^^, 7529 ind=^J, 7530adm2|lsi adm2, 7531 OTbs, am, 7532 cols#80, lines#24, 7533 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7534 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7535 dl1=\ER, ed=\EY, el=\ET, home=^^, ich1=\EQ, il1=\EE, ind=^J, 7536 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 7537# (adm3: removed obsolete ":ma=^K^P:" -- esr) 7538adm3|lsi adm3, 7539 OTbs, am, 7540 cols#80, lines#24, 7541 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, ind=^J, 7542# The following ADM-3A switch settings are assumed for normal operation: 7543# SPACE U/L_DISP CLR_SCRN 24_LINE 7544# CUR_CTL LC_EN AUTO_NL FDX 7545# Other switches may be set for operator convenience or communication 7546# requirements. I recommend 7547# DISABLE_KB_LOCK LOCAL_OFF 103 202_OFF 7548# ETX_OFF EOT_OFF 7549# Most of these terminals required an option ROM to support lower case display. 7550# Open the case and look at the motherboard; if you see an open 24-pin DIP 7551# socket, you may be out of luck. 7552# 7553# (adm3a: some capabilities merged in from BRl entry -- esr) 7554adm3a|lsi adm3a, 7555 OTbs, am, 7556 cols#80, lines#24, 7557 OTma=^K^P, OTnl=^J, bel=^G, clear=\032$<1/>, cr=^M, cub1=^H, 7558 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 7559 cuu1=^K, home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, 7560 kcuu1=^K, rs2=^N, 7561adm3a+|adm3a plus, 7562 kbs=^H, use=adm3a, 7563# (adm5: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" & duplicate ":do=^J:" -- esr) 7564adm5|lsi adm5, 7565 xmc#1, 7566 bel=^G, cr=^M, cud1=^J, ed=\EY, el=\ET, kbs=^H, khome=^^, 7567 rmso=\EG, smso=\EG, use=adm3a+, 7568# A lot of terminals other than adm11s use these. Wherever you see 7569# use=adm+sgr with some of its capabilities disabled, try the 7570# disabled ones. They may well work but not have been documented or 7571# expressed in the using entry. We'd like to cook up an <sgr> but the 7572# <rmacs>/<smacs> sequences of the using entries vary too much. 7573adm+sgr|adm style highlight capabilities, 7574 invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, sgr0=\EG0, 7575 smso=\EG4, smul=\EG8, 7576# LSI ADM-11 from George William Hartwig, Jr. <geo@BRL-TGR.ARPA> via BRL 7577# Status line additions from Stephen J. Muir <stephen%comp.lancs.ac.uk@ucl-cs> 7578# <khome> from <stephen%comp.lancs.ac.uk@ucl-cs.arpa>. <clear> could also 7579# be ^Z, according to his entry. 7580# (adm11: <smul>=\EG4 was obviously erroneous because it also said 7581# <rev>=\EG4. Looking at other ADMs confirms this -- esr) 7582adm11|LSI ADM-11, 7583 OTbs, am, hs, 7584 OTkn#8, cols#80, lines#24, 7585 OTnl=^J, bel=^G, blink=\EG2, clear=\E*, cr=^M, cub1=^H, 7586 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 7587 cuu1=^K, dsl=\Eh, ed=\EY, el=\ET, fsl=\E(\r, home=^^, ht=^I, 7588 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, 7589 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 7590 kf7=^AF\r, kf8=^AG\r, khome=^^, nel=^M^J, tsl=\EF\E), 7591 use=adm+sgr, 7592# From: Andrew Scott Beals <bandy@lll-crg.ARPA> 7593# Corrected by Olaf Siebert <rhialto@polder.ubc.kun.nl>, 11 May 1995 7594# Supervisor mode info by Ari Wuolle, <awuolle@delta.hut.fi>, 27 Aug 1996 7595# (adm12: removed obsolete ":kn:ma=j^Jk^P^K^Pl ^R^L^L :". This formerly had 7596# <is2>=\Eq but that looked wrong; this <is2> is from Dave Yost <esquire!yost> 7597# via BRL. That entry asserted <xmc#1>, but I've left that out because 7598# neither earlier nor later ADMSs have it -- esr) 7599# 7600# You will need to get into the supervisor setup before you can set 7601# baudrate etc. for your ADM-12+. Press Shift-Ctrl-Setup and you should 7602# see a lot more setup options. 7603# 7604# While in supervisor setup you can also use following codes: 7605# 7606# Ctrl-P Personality character selections (configure for example what 7607# arrow keys send, if I recall correctly) 7608# Ctrl-T tabs 1-80 use left&right to move and up to set and 7609# Ctrl-V tabs 81-158 down to clear tab. Shift-Ctrl-M sets right margin at cursor 7610# Ctrl-B Binary setup (probably not needed. I think that everything can 7611# be set using normal setup) 7612# Ctrl-A Answerback mode (enter answerback message) 7613# Ctrl-U User friendly mode (normal setup) 7614# Ctrl-D Defaults entire setup and function keys from EPROM tables 7615# Ctrl-S Save both setup and functions keys. Takes from 6 to 10 seconds. 7616# Ctrl-R Reads both setup and functions keys from NVM. 7617# Shift-Ctrl-X Unlock keyboard and cancel received X-OFF status 7618# 7619# ADM-12+ supports hardware handshaking, but it is DTR/CTS as opposed to 7620# RTS/CTS used nowadays with virtually every modem and computer. 19200 7621# bps works fine with hardware flow control. 7622# 7623# The following null-modem cable should fix this and enable you to use 7624# RTS/CTS handshaking (which Linux supports, use CRTSCTS setting). Also 7625# set ADM-12+ for DTR handshaking from supervisor setup. 7626# 7627# PC Serial ADM-12+ 7628# -------- ------- 7629# 2 - 3 7630# 3 - 2 7631# 4 - 5 7632# 5 - 20 7633# 6,8 - 4 7634# 7 - 7 7635# 20 - 6,8 7636# 7637adm12|lsi adm12, 7638 OTbs, OTpt, am, mir, 7639 OTug#1, cols#80, it#8, lines#24, 7640 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7641 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7642 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, 7643 is2=\E0 \E1 \E1 \E1 \E1 \E1 \E1 \E1 \E1, 7644 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 7645 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 7646 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, smir=\Eq, tbc=\E0, 7647 use=adm+sgr, 7648# (adm20: removed obsolete ":kn#7:" -- esr) 7649adm20|lear siegler adm20, 7650 OTbs, am, 7651 cols#80, it#8, lines#24, 7652 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cuf1=^L, 7653 cup=\E=%i%p2%{31}%+%c%p1%{31}%+%c, cuu1=^K, dch1=\EW, 7654 dl1=\ER, ed=\EY, el=\ET, home=^^, ht=^I, ich1=\EQ, il1=\EE, 7655 kf1=^A, kf2=^B, kf3=^W, kf4=^D, kf5=^E, kf6=^X, kf7=^Z, rmso=\E(, 7656 sgr0=\E(, smso=\E), 7657adm21|lear siegler adm21, 7658 xmc#1, 7659 bel=^G, cr=^M, cud1=^J, dch1=\EW, dl1=30*\ER, ed=\EY, el=\ET, 7660 ich1=\EQ, il1=30*\EE, ind=^J, invis@, kbs=^H, kcub1=^H, 7661 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, use=adm+sgr, 7662 use=adm3a, 7663# (adm22: ":em=:" was an obvious typo for ":ei=:"; also, 7664# removed obsolete ":kn#7:ma=j^Jk^P^K^Pl ^R^L^L :"; 7665# removed bogus-looking \200 from before <cup>. -- esr) 7666adm22|lsi adm22, 7667 OTbs, am, 7668 cols#80, lines#24, 7669 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7670 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7671 dl1=\ER, ed=\Ey, el=\Et, home=^^, ht=\Ei, ich1=\EQ, il1=\EE, 7672 is2=\E%\014\014\014\016\003\0\003\002\003\002\0\0\0\0\0\0\0\0\0\0\0, 7673 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, 7674 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 7675 kf7=^AF\r, khome=^^, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 7676 lf6=F6, lf7=F7, rmso=\E(, sgr0=\E(, smso=\E), 7677# ADM 31 DIP Switches 7678# 7679# This information comes from two versions of the manual for the 7680# Lear-Siegler ADM 31. 7681# 7682# Main board: 7683# rear of case 7684# +-||||-------------------------------------+ 7685# + S1S2 ||S + 7686# + ||3 + 7687# + + 7688# + ||S + 7689# + ||4 + 7690# + + 7691# + + 7692# + + 7693# + + 7694# + + 7695# +-+ +-+ 7696# + + 7697# + S5 S6 S7 + 7698# + == == == + 7699# +----------------------------------------------+ 7700# front of case (keyboard) 7701# 7702# S1 - Data Rate - Modem 7703# S2 - Data Rate - Printer 7704# ------------------------ 7705# Data Rate Setting 7706# ------------------- 7707# 50 0 0 0 0 7708# 75 1 0 0 0 7709# 110 0 1 0 0 7710# 134.5 1 1 0 0 7711# 150 0 0 1 0 7712# 300 1 0 1 0 7713# 600 0 1 1 0 7714# 1200 1 1 1 0 7715# 1800 0 0 0 1 7716# 2000 1 0 0 1 7717# 2400 0 1 0 1 7718# 3600 1 1 0 1 7719# 4800 0 0 1 1 7720# 7200 1 0 1 1 7721# 9600 0 1 1 1 7722# x 1 1 1 1 7723# 7724# S3 - Interface/Printer/Attributes 7725# --------------------------------- 7726# Printer Busy Control 7727# sw1 sw2 sw3 7728# --------------- 7729# off off off Busy not active, CD disabled 7730# off off on Busy not active, CD enabled 7731# off on off Busy active on J5-20, CD disabled 7732# on off off Busy active on J5-19, CD disabled - Factory Set. 7733# on off on Busy active on J5-19, CD enabled 7734# 7735# sw4 Used in conjuction with S4 for comm interface control - Fact 0 7736# 7737# sw5 Secondary Channel Control (Hardware implementation only) - Fact 0 7738# 7739# sw6 ON enables printer BUSY active LOW - Factory Setting 7740# OFF enables printer BUSY active HIGH - If set to this, ADM31 senses 7741# 7742# sw7 ON - steady cursor - Factory Setting 7743# OFF - blinking cursor 7744# 7745# sw8 ON causes selected attribute character to be displayed 7746# OFF causes SPACE to be displayed instead - Factory Setting 7747# 7748# S4 - Interface 7749# -------------- 7750# Modem Interface 7751# S3 S4 S4 S4 S4 7752# sw4 sw1 sw2 sw3 sw4 7753# --------------------------- 7754# OFF ON OFF ON OFF Enable RS-232C interface, Direct Connect and 7755# Current Loop disabled - Factory Setting 7756# ON ON OFF ON OFF Enable Current Loop interface, Direct Connect 7757# disabled 7758# OFF OFF ON OFF ON Enable Direct Connect interface, RS-232C and 7759# Current Loop Disabled 7760# 7761# sw5 ON disables dot stretching mode - Factory Setting 7762# OFF enables dot stretching mode 7763# sw6 ON enables blanking function 7764# OFF enables underline function - Factory Setting 7765# sw7 ON causes NULLS to be displayed as NULLS 7766# OFF causes NULLS to be displayed as SPACES - Factory Setting 7767# 7768# S5 - Word Structure 7769# ------------------- 7770# sw1 ON enables BREAK key - Factory Setting 7771# OFF disables BREAK key 7772# sw2 ON selects 50Hz monitor refresh rate 7773# OFF selects 60Hz monitor refresh rate - Factory Setting 7774# 7775# Modem Port Selection 7776# sw3 sw4 sw5 7777# --------------- 7778# ON ON ON Selects 7 DATA bits, even parity, 2 STOP bits 7779# OFF ON ON Selects 7 DATA bits, odd parity, 2 STOP bits 7780# ON OFF ON Selects 7 DATA bits, even parity, 1 STOP bit - Factory Set. 7781# OFF OFF ON Selects 7 DATA bits, odd parity, 1 STOP bit 7782# ON ON OFF Selects 8 DATA bits, no parity, 2 STOP bits 7783# OFF ON OFF Selects 8 DATA bits, no parity, 1 STOP bit 7784# ON OFF OFF Selects 8 DATA bits, even parity, 1 STOP bit 7785# OFF OFF OFF Selects 8 DATA bits, odd parity, 1 STOP bit 7786# 7787# sw6 ON sends bit 8 a 1 (mark) 7788# OFF sends bit 8 as 0 (space) - Factory Setting 7789# sw7 ON selects Block Mode 7790# OFF selects Conversation Mode - Factory Setting 7791# sw8 ON selects Full Duplex operation 7792# OFF selects Half Duplex operation - Factory Setting 7793# 7794# S6 - Printer 7795# ------------ 7796# sw1, sw2, sw6, sw7 Reserved - Factory 0 7797# 7798# Printer Port Selection 7799# same as Modem above, bit 8 (when 8 DATA bits) is always = 0 7800# 7801# sw8 ON enables Printer Port 7802# OFF disables Printer Port - Factory Setting 7803# 7804# S7 - Polling Address 7805# -------------------- 7806# sw1-7 Establish ASCII character which designates terminal polling address 7807# ON = logic 0 7808# OFF = logic 1 - Factory Setting 7809# sw8 ON enables Polling Option 7810# OFF disables Polling Option - Factory Setting 7811# 7812# 7813# On some older adm31s, S4 does not exist, and S5-sw6 is not defined. 7814# 7815# This adm31 entry uses underline as the standout mode. 7816# If the adm31 gives you trouble with standout mode, check the DIP switch in 7817# position 6, bank @c11, 25% from back end of the circuit board. Should be 7818# OFF. If there is no such switch, you have an old adm31 and must use oadm31. 7819# (adm31: removed obsolete ":ma=j^Jk^P^K^Pl ^R^L^L :" -- esr) 7820adm31|lsi adm31 with sw6 set for underline mode, 7821 OTbs, am, mir, 7822 cols#80, lines#24, 7823 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7824 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 7825 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, ind=^J, is2=\Eu\E0, 7826 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 7827 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 7828 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, rmir=\Er, rmso=\EG0, 7829 rmul=\EG0, sgr0=\EG0, smir=\Eq, smso=\EG1, smul=\EG1, 7830adm31-old|o31|old adm31, 7831 rmul@, smso=\EG4, smul@, use=adm31, 7832# LSI ADM-36 from Col. George L. Sicherman <gloria!colonel> via BRL 7833adm36|LSI ADM36, 7834 OTbs, OTpt, 7835 OTkn#4, 7836 if=/usr/share/tabset/vt100, 7837 is2=\E<\E>\E[6;?2;?7;?8h\E[4;20;?1;?3;?4;?5;?6;?18;?19l, 7838 use=vt100, 7839# (adm42: removed obsolete ":ma=^K^P:" -- esr) 7840adm42|lsi adm42, 7841 OTbs, am, 7842 cols#80, lines#24, 7843 bel=^G, cbt=\EI, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 7844 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 7845 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ht=^I, 7846 il1=\EE$<270>, ind=^J, invis@, ip=$<6*>, kcub1=^H, kcud1=^J, 7847 kcuf1=^L, kcuu1=^K, khome=^^, pad=\177, rmir=\Er, rmul@, 7848 smir=\Eq, smul@, use=adm+sgr, 7849# The following termcap for the Lear Siegler ADM-42 leaves the 7850# "system line" at the bottom of the screen blank (for those who 7851# find it distracting otherwise) 7852adm42-ns|lsi adm-42 with no system line, 7853 cbt=\EI\EF \011, clear=\E;\EF \011, 7854 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<6>\EF \011, 7855 dch1=\EW\EF \011, dl1=\ER\EF \011, ed=\EY\EF \011, 7856 el=\ET\EF \011, il1=\EE\EF \011, rmir=\Er\EF \011, 7857 smir=\Eq\EF \011, use=adm42, 7858# ADM 1178 terminal -- rather like an ADM-42. Manual is dated March 1 1985. 7859# The insert mode of this terminal is commented out because it's broken for our 7860# purposes in that it will shift the position of every character on the page, 7861# not just the cursor line! 7862# From: Michael Driscoll <fenris@lightspeed.net> 10 July 1996 7863adm1178|1178|lsi adm1178, 7864 am, 7865 cols#80, lines#24, xmc#1, 7866 bel=^G, bold=\E(, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, 7867 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 7868 cvvis=\EC\E3 \E3(, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, 7869 home=^^, ht=^I, il1=\EE, ind=^J, ip=$<6*/>, kbs=^H, kcub1=^H, 7870 kcud1=^J, nel=^M^J, pad=\177, rev=\EG4, rmso=\EG0, rmul=\EG0, 7871 sgr0=\E), smso=\EG4, smul=\EG1, 7872 7873#### Prime 7874# 7875# Yes, Prime made terminals. These entries were posted by Kevin J. Cummings 7876# <cummings@primerd.prime.com> on 14 Dec 1992 and lightly edited by esr. 7877# Prime merged with ComputerVision in the late 1980s; you can reach them at: 7878# 7879# ComputerVision Services 7880# 500 Old Connecticut Path 7881# Framingham, Mass. 7882# 7883 7884# Standout mode is dim reverse-video. 7885pt100|pt200|wren|fenix|prime pt100/pt200, 7886 am, bw, mir, msgr, 7887 cols#80, it#8, lines#24, 7888 cbt=\E[Z, clear=\E?, cr=^M, cub=\E[%p1%dD, cub1=^H, 7889 cud=\E[%p1%dB, cud1=\ED, cuf=\E[%p1%dC, cuf1=\E[C, 7890 cup=\E0%p1%{33}%+%c%p2%{33}%+%c, cuu=\E[%p1%dA, 7891 cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl1=\E[M, 7892 ed=\E[J\E[r, el=\E[K\E[t, flash=\E$$<200/>\E$P, 7893 home=\E$B, ht=^I, il1=\E[L\E[t, ind=^J, kbs=^H, kcub1=\E[D, 7894 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E$A, nel=^M^J, 7895 rmcup=, rmir=\E[4l, rmkx=\E[>13l, rmso=\E[m, rmul=\E[m, 7896 sgr0=\E[m, 7897 smcup=\E[>1l\E[>2l\E[>16l\E[4l\E[>9l\E[20l\E[>3l\E[>7h\E[>12l\E[1Q, 7898 smir=\E[4h, smkx=\E[>13h, smso=\E[2;7m, smul=\E[4m, 7899pt100w|pt200w|wrenw|fenixw|prime pt100/pt200 in 132-column mode, 7900 cols#132, 7901 cup=\E[%i%p1%d;%p2%dH, use=pt100, 7902pt250|Prime PT250, 7903 rmso@, smso@, use=pt100, 7904pt250w|Prime PT250 in 132-column mode, 7905 rmso@, smso@, use=pt100w, 7906 7907#### Qume (qvt) 7908# 7909# Qume, Inc. 7910# 3475-A North 1st Street 7911# San Jose CA 95134 7912# Vox: (800)-457-4447 7913# Fax: (408)-473-1510 7914# Net: josed@techsupp.wyse.com (Jose D'Oliveira) 7915# 7916# Qume was bought by Wyse, but still (as of early 1995) has its own support 7917# group and production division. 7918# 7919# Discontinued Qume models: 7920# 7921# The qvt101 and qvt102 listed here are long obsolete; so is the qvt101+ 7922# built to replace them, and a qvt119+ which was a 101+ with available wide 7923# mode (132 columns). There was a qvt103 which added vt100/vt131 emulations 7924# and an ANSI-compatible qvt203 that replaced it. Qume started producing 7925# ANSI-compatible terminals with the qvt323 and qvt61. 7926# 7927# Current Qume models (as of February 1995): 7928# 7929# All current Qume terminals have ANSI-compatible operation modes. 7930# Qume is still producing the qvt62, which features emulations for other 7931# popular lines such as ADDS, and dual-host capabilities. The qvt82 is 7932# designed for use as a SCO ANSI terminal. The qvt70 is a color terminal 7933# with many emulations including Wyse370, Wyse 325, etc. Their newest 7934# model is the qvt520, which is vt420-compatible. 7935# 7936# There are some ancient printing Qume terminals under `Daisy Wheel Printers' 7937# 7938# If you inherit a Qume without docs, try Ctrl-Shift-Setup to enter its 7939# setup mode. Shift-s should be a configuration save to NVRAM. 7940 7941qvt101|qvt108|qume qvt 101 and QVT 108, 7942 xmc#1, use=qvt101+, 7943 7944# This used to have <cvvis=\E.2> but no <cnorm> or <civis>. The BSD termcap 7945# file had <cvvis=\EM4 \200\200\200>. I've done the safe thing and yanked 7946# both. The <rev> is from BSD, which also claimed bold=\E( and dim=\E). 7947# What seems to be going on here is that this entry was designed so that 7948# the normal highlight is bold and standout is dim plus something else 7949# (reverse-video maybe? But then, are there two <rev> sequences?) 7950# 7951# Added kdch1, kil1, kdl1 based on screenshot -TD: 7952# http://www.vintagecomputer.net/qume/qvt-108/qume_qvt-108_keyboard.jpg 7953qvt101+|qvt101p|qume qvt 101 PLUS product, 7954 am, bw, hs, ul, 7955 cols#80, lines#24, xmc#0, 7956 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^J, 7957 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 7958 dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\EY, el=\ET, 7959 flash=\Eb$<200>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, 7960 ich1=\EQ, il1=\EE, ind=^J, invis@, kbs=^H, kcbt=\EI, kcub1=^H, 7961 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 7962 kel=\ET, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, kf3=^AB\r, 7963 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 7964 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, mc4=\EA, mc5=\E@, 7965 rmso=\E(, smso=\E0P\E), tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, 7966qvt102|qume qvt 102, 7967 cnorm=\E., use=qvt101, 7968# (qvt103: added <rmam>/<smam> based on init string -- esr) 7969qvt103|qume qvt 103, 7970 am, xenl, xon, 7971 cols#80, it#8, lines#24, vt#3, 7972 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 7973 clear=\E[H\E[2J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 7974 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 7975 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 7976 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 7977 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, home=\E[H, ht=^I, 7978 hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 7979 kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, 7980 rev=\E[7m$<2>, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E[?1l\E>, 7981 rmso=\E[m$<2>, rmul=\E[m$<2>, 7982 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 7983 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>, 7984 sgr0=\E[m$<2>, smam=\E[?7h, smkx=\E[?1h\E=, 7985 smso=\E[7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 7986qvt103-w|qume qvt103 132 cols, 7987 cols#132, lines#24, 7988 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt103, 7989qvt119+|qvt119p|qvt119|qume qvt 119 and 119PLUS terminals, 7990 am, hs, mir, msgr, 7991 cols#80, lines#24, xmc#0, 7992 bel=^G, cbt=\EI, clear=\E*1, cnorm=\E.4, cr=^M, cub1=^H, 7993 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 7994 cuu1=^K, cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, 7995 el=\Et, flash=\En0$<200>\En1, fsl=^M, home=^^, ht=^I, 7996 hts=\E1, il1=\EE, ind=^J, is2=\EDF\EC\EG0\Er\E(\E%EX, 7997 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, 7998 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 7999 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 8000 mc4=\EA, mc5=\E@, ri=\EJ, rmir=\Er, smir=\Eq, smul=\EG8, 8001 tbc=\E3, tsl=\Eg\Ef, use=adm+sgr, 8002qvt119+-25|qvt119p-25|QVT 119 PLUS with 25 data lines, 8003 lines#25, use=qvt119+, 8004qvt119+-w|qvt119p-w|qvt119-w|QVT 119 and 119 PLUS in 132 column mode, 8005 cols#132, 8006 is2=\EDF\EC\EG0\Er\E(\E%\EX\En4, use=qvt119+, 8007qvt119+-25-w|qvt119p-25-w|qvt119-25-w|QVT 119 and 119 PLUS 132 by 25, 8008 lines#25, use=qvt119+, 8009qvt203|qvt203+|qume qvt 203 Plus, 8010 dch1=\E[P$<7>, dl1=\E[M$<99>, il1=\E[L$<99>, ind=\n$<30>, 8011 ip=$<7>, kf0=\E[29~, kf1=\E[17~, kf2=\E[18~, kf3=\E[19~, 8012 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 8013 kf9=\E[28~, rmir=\E[4l, smir=\E[4h, use=qvt103, 8014qvt203-w|qvt203-w-am|qume qvt 203 PLUS in 132 cols (w/advanced video), 8015 cols#132, lines#24, 8016 rs2=\E>\E[?3h\E[?4l\E[?5l\E[?8h, use=qvt203, 8017# 8018# Since a command is present for enabling 25 data lines, 8019# a specific terminfo entry may be generated for the 203. 8020# If one is desired for the QVT 119 PLUS then 25 lines must 8021# be selected in the status line (setup line 9). 8022# 8023qvt203-25|QVT 203 PLUS with 25 by 80 column mode, 8024 cols#80, lines#25, 8025 is2=\E[=40h\E[?3l, use=qvt203, 8026qvt203-25-w|QVT 203 PLUS with 25 by 132 columns, 8027 cols#132, lines#25, 8028 rs2=\E[?3h\E[=40h, use=qvt203, 8029 8030#### Televideo (tvi) 8031# 8032# TeleVideo 8033# 550 East Brokaw Road 8034# PO Box 49048 95161 8035# San Jose CA 95112 8036# Vox: (408)-954-8333 8037# Fax: (408)-954-0623 8038# 8039# 8040# These require incredible amounts of padding. 8041# 8042# All of these terminals (912 to 970 and the tvipt) are discontinued. Newer 8043# Televideo terminals are ANSI and PC-ANSI compatible. 8044 8045tvi803|televideo 803, 8046 clear=\E*$<10>, use=tvi950, 8047 8048# Vanilla tvi910 -- W. Gish <cswarren@violet> 10/29/86 8049# Switch settings are: 8050# 8051# S1 1 2 3 4 8052# D D D D 9600 8053# D D D U 50 8054# D D U D 75 8055# D D U U 110 8056# D U D D 135 8057# D U D U 150 8058# D U U D 300 8059# D U U U 600 8060# U D D D 1200 8061# U D D U 1800 8062# U D U D 2400 8063# U D U U 3600 8064# U U D D 4800 8065# U U D U 7200 8066# U U U D 9600 8067# U U U U 19200 8068# 8069# S1 5 6 7 8 8070# U D X D 7N1 (data bits, parity, stop bits) (X means ignored) 8071# U D X U 7N2 8072# U U D D 7O1 8073# U U D U 7O2 8074# U U U D 7E1 8075# U U U U 7E2 8076# D D X D 8N1 8077# D D X U 8N2 8078# D U D D 8O1 8079# D U U U 8E2 8080# 8081# S1 9 Autowrap 8082# U on 8083# D off 8084# 8085# S1 10 CR/LF 8086# U do CR/LF when CR received 8087# D do CR when CR received 8088# 8089# S2 1 Mode 8090# U block 8091# D conversational 8092# 8093# S2 2 Duplex 8094# U half 8095# D full 8096# 8097# S2 3 Hertz 8098# U 50 8099# D 60 8100# 8101# S2 4 Edit mode 8102# U local 8103# D duplex 8104# 8105# S2 5 Cursor type 8106# U underline 8107# D block 8108# 8109# S2 6 Cursor down key 8110# U send ^J 8111# D send ^V 8112# 8113# S2 7 Screen colour 8114# U green on black 8115# D black on green 8116# 8117# S2 8 DSR status (pin 6) 8118# U disconnected 8119# D connected 8120# 8121# S2 9 DCD status (pin 8) 8122# U disconnected 8123# D duplex 8124# 8125# S2 10 DTR status (pin 20) 8126# U disconnected 8127# D duplex 8128# (tvi910: removed obsolete ":ma=^Kk^Ll^R^L:"; added <khome>, <cub1>, <cud1>, 8129# <ind>, <hpa>, <vpa>, <am>, <msgr> from SCO entry -- esr) 8130tvi910|televideo model 910, 8131 OTbs, am, msgr, 8132 cols#80, it#8, lines#24, xmc#1, 8133 bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8134 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, 8135 home=\E=\001\001, hpa=\E]%p1%{32}%+%c, ht=^I, 8136 if=/usr/share/tabset/stdcrt, ind=^J, invis@, kbs=^H, 8137 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kf0=^AI\r, kf1=^A@\r, 8138 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 8139 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 8140 vpa=\E[%p1%{32}%+%c, use=adm+sgr, 8141# From: Alan R. Rogers <rogers%albany@csnet-relay> 8142# as subsequently hacked over by someone at SCO 8143# (tvi910+: removed obsolete ":ma=^K^P^L :" -- esr) 8144# 8145# Here are the 910+'s DIP switches (U = up, D = down, X = don't care): 8146# 8147# S1 1 2 3 4: 8148# D D D D 9600 D D D U 50 D D U D 75 D D U U 110 8149# D U D D 135 D U D U 150 D U U D 300 D U U U 600 8150# U D D D 1200 U D D U 1800 U D U D 2400 U D U U 3600 8151# U U D D 4800 U U D U 7200 U U U D 9600 U U U U 19200 8152# 8153# S1 5 6 7 8: 8154# U D X D 7N1 U D X U 7N2 U U D D 7O1 U U D U 7O2 8155# U U U D 7E1 U U U U 7E2 D D X D 8N1 D D X U 8N2 8156# D U D D 8O1 D U U U 8E2 8157# 8158# S1 9 Autowrap (U = on, D = off) 8159# S1 10 CR/LF (U = CR/LF on CR received, D = CR on CR received) 8160# S2 1 Mode (U = block, D = conversational) 8161# S2 2 Duplex (U = half, D = full) 8162# S2 3 Hertz (U = 50, D = 60) 8163# S2 4 Edit mode (U = local, D = duplex) 8164# S2 5 Cursor type (U = underline, D = block) 8165# S2 6 Cursor down key (U = send ^J, D = send ^V) 8166# S2 7 Screen colour (U = green on black, D = black on green) 8167# S2 8 DSR status (pin 6) (U = disconnected, D = connected) 8168# S2 9 DCD status (pin 8) (U = disconnected, D = connected) 8169# S2 10 DTR status (pin 20) (U = disconnected, D = connected) 8170# 8171tvi910+|televideo 910+, 8172 dch1=\EW, dl1=\ER$<33*>, home=^^, ich1=\EQ, il1=\EE$<33*>, 8173 kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, 8174 kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, 8175 ll=\E=7\s, use=tvi910, 8176 8177# (tvi912: removed obsolete ":ma=^K^P^L :", added <flash> and 8178# <khome> from BRL entry -- esr) 8179tvi912|tvi914|tvi920|old televideo 912/914/920, 8180 OTbs, OTpt, am, msgr, 8181 cols#80, it#8, lines#24, xmc#1, 8182 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8183 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 8184 dl1=\ER$<33*>, ed=\Ey, el=\ET, flash=\Eb$<50/>\Ed, home=^^, 8185 ht=^I, hts=\E1, ich1=\EQ, if=/usr/share/tabset/stdcrt, 8186 il1=\EE$<33*>, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 8187 kcuu1=^K, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 8188 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 8189 kf9=^AH\r, khome=^^, rmso=\Ek, rmul=\Em, smso=\Ej, smul=\El, 8190 tbc=\E3, 8191# We got some new tvi912c terminals that act really weird on the regular 8192# termcap, so one of our gurus worked this up. Seems that cursor 8193# addressing is broken. 8194tvi912cc|tvi912 at cowell college, 8195 cup@, use=tvi912c, 8196 8197# tvi{912,920}[bc] - TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C 8198# From: Benjamin C. W. Sittler 8199# 8200# Someone has put a scanned copy of the manual online at: 8201# http://vt100.net/televideo/912b-om/ 8202# 8203# These terminals were produced ca. 1979, and had a 12" monochrome 8204# screen, supported 75-9600 baud (no handshaking), monochrome, 7-bit 8205# ASCII, and were generally similar to adm3a but with attributes 8206# (including some with magic cookies), fancy half-duplex mode, and 8207# different bugs. 8208# 8209# Some operations reqire truly incredible amounts of padding. The 8210# insert_line (<il1>) and delete_line (<dl1>) operations in particular 8211# are so slow as to be nearly unusable. 8212# 8213# There may or may not have been a separate, earlier series of 912/920 8214# terminals (without the "B" and "C" suffix); I have never seen one, 8215# and the manual only describes the "B" and "C" series. The 912 and 920 8216# are quite distinct from the 914 and 924, which were much nicer non- 8217# magic-cookie terminals similar to the 950. 8218# 8219# This is a new description for the following TeleVideo terminals, 8220# distinguished chiefly by their keyboards: 8221# 8222# TVI-912B - very odd layout, no function keys (84 keys) 8223# TVI-920B - typewriter layout, no function keys (103 keys) 8224# TVI-912C - very odd layout, function keys F1-F11 (82 keys) 8225# TVI-920C - typewriter layout, function keys F1-F11 (101 keys) 8226# 8227# To choose a setting for the TERM variable, start with the model: 8228# 8229# Model || base name 8230# ----------||----------- 8231# TVI-912B || tvi912b 8232# TVI-912C || tvi912c 8233# TVI-920B || tvi920b 8234# TVI-920C || tvi920c 8235# 8236# Then add a suffix from the following table describing installed options 8237# and how you'd like to use the terminal: 8238# 8239# Use Video | Second | Visual | Magic | Page || feature 8240# Attributes | Page | Bell | Cookies | Print || suffix 8241# ------------|--------|--------|---------|-------||--------- 8242# No | No | N/A | N/A | No || -unk 8243# No | No | N/A | N/A | Yes || -p 8244# No | Yes | No | N/A | No || -2p-unk 8245# No | Yes | No | N/A | Yes || -2p-p 8246# No | Yes | Yes | N/A | No || -vb-unk 8247# No | Yes | Yes | N/A | Yes || -vb-p 8248# Yes | No | N/A | No | N/A || 8249# Yes | No | N/A | Yes | N/A || -mc 8250# Yes | Yes | No | No | N/A || -2p 8251# Yes | Yes | No | Yes | N/A || -2p-mc 8252# Yes | Yes | Yes | No | N/A || -vb 8253# Yes | Yes | Yes | Yes | N/A || -vb-mc 8254# 8255# So e.g. a model 920 C with second page memory option, visual bell 8256# and no magic cookies would be tvi920c-vb; a model 912 B without the 8257# second page memory option and using magic cookies would be 8258# tvi912b-mc 8259# 8260# PADDING 8261# 8262# At 9600 baud, the terminal is prone to overflow its input buffer 8263# during complex operations (insert/delete 8264# character/line/screen/page), and it does not signal this over the 8265# RS232 cable. The typical symptom of an overrun is that the terminal 8266# starts beeping, and output becomes garbled. 8267# 8268# The padding delays in this terminfo were derived using tack(1) 8269# running on a Linux box connected to a TVI-920C with a later-model 8270# (A49C1-style) ROM running at 9600 baud, so your mileage may 8271# vary. The numbers below seem to give the terminal enough time so 8272# that it doesn't overflow its input buffer and start losing 8273# characters. 8274# 8275# KEYS 8276# 8277# If you want to use the FUNCT key on a tvi912[bc], use the 8278# corresponding tvi920[bc] terminfo with FUNCT + ... equivalents from 8279# the following table (these also work on the 920 series): 8280# 8281# Unshifted Function Keys: 8282# 8283# Key | capname|| Equivalent 8284# -----|--------||------------ 8285# F1 | <kf1> || FUNCT + @ 8286# F2 | <kf2> || FUNCT + A 8287# F3 | <kf3> || FUNCT + B 8288# F4 | <kf4> || FUNCT + C 8289# F5 | <kf5> || FUNCT + D 8290# F6 | <kf6> || FUNCT + E 8291# F7 | <kf7> || FUNCT + F 8292# F8 | <kf8> || FUNCT + G 8293# F9 | <kf9> || FUNCT + H 8294# F10 | <kf10> || FUNCT + I 8295# F11 | <kf11> || FUNCT + J 8296# 8297# Shifted Function Keys: 8298# 8299# SHIFT + Key | capname|| Equivalent 8300# -------------|--------||------------ 8301# SHIFT + F1 | <kf12> || FUNCT + ` 8302# SHIFT + F2 | <kf13> || FUNCT + a 8303# SHIFT + F3 | <kf14> || FUNCT + b 8304# SHIFT + F4 | <kf15> || FUNCT + c 8305# SHIFT + F5 | <kf16> || FUNCT + d 8306# SHIFT + F6 | <kf17> || FUNCT + e 8307# SHIFT + F7 | <kf18> || FUNCT + f 8308# SHIFT + F8 | <kf19> || FUNCT + g 8309# SHIFT + F9 | <kf20> || FUNCT + h 8310# SHIFT + F10 | <kf21> || FUNCT + i 8311# SHIFT + F11 | <kf22> || FUNCT + j 8312# 8313# PORTS AND SWITCH SETTINGS 8314# 8315# Here are the switch settings for the TVI-912B/TVI-920B and 8316# TVI-912C/TVI-920C: 8317# 8318# S1 (Line), and S3 (Printer) baud rates -- put one, and only one, switch down: 8319# 2: 9600 3: 4800 4: 2400 5: 1200 8320# 6: 600 7: 300 8: 150 9: 75 8321# 10: 110 8322# 8323# S2 UART/Terminal options: 8324# Up Down 8325# 1: Not used Not allowed 8326# 2: Alternate character set Standard character set 8327# 3: Full duplex Half duplex 8328# 4: 50 Hz refresh 60 Hz refresh 8329# 5: No parity Send parity 8330# 6: 2 stop bits 1 stop bit 8331# 7: 8 data bits 7 data bits 8332# 8: Not used Not allowed on Rev E or lower 8333# 9: Even parity Odd parity 8334# 10: Steady cursor Blinking cursor 8335# (On Rev E or lower, use W25 instead of switch 10.) 8336# 8337# S5 UART/Terminal options: 8338# Open Closed 8339# 1: P3-6 Not connected DSR received on P3-6 8340# 2: P3-8 Not connected DCD received on P3-8 8341# 8342# 3 Open, 4 Open: P3-20 Not connected 8343# 3 Open, 4 Closed: DTR on when terminal is on 8344# 3 Closed, 4 Open: DTR is connected to RTS 8345# 3 Closed, 4 Closed: Not allowed 8346# 8347# 5 Closed: HDX printer (hardware control) Rev. K with extension port off, 8348# all data transmitted out of the modem port (P3) will also be 8349# transmitted out of the printer port (P4). 8350# 8351# 6 Open, 7 Open: Not allowed 8352# 6 Open, 7 Closed: 20ma current loop input 8353# 6 Closed, 7 Open: RS232 input 8354# 6 Closed, 7 Closed: Not allowed 8355# 8356# Jumper options: 8357# If the jumper is installed, the effect will occur (the next time the terminal 8358# is switched on). 8359# 8360# S4/W31: Enables automatic LF upon receipt of CR from 8361# remote or keyboard. 8362# S4/W32: Enables transmission of EOT at the end of Send. If not 8363# installed, a carriage return is sent. 8364# S4/W33: Disables automatic carriage return in column 80. 8365# S4/W34: Selects Page Print Mode as initial condition. If not 8366# installed, Extension Mode is selected. 8367# 8368# NON-STANDARD CAPABILITIES 8369# 8370# Sending <u9> or <u7> returns a cursor position report in the format 8371# YX\r, where Y and X are as in <cup>. This format is described in 8372# <u8> and <u6>, but it's not clear how one should write an 8373# appropriate scanf string, since we need to subtract %' ' from the 8374# character after reading it. The <u9> capability is used by tack(1) 8375# to synchronize during padding tests, and seems to work for that 8376# purpose. 8377# 8378# This description also includes the obsolete termcap capabilities 8379# has_hardware_tabs (<OTpt>) and backspaces_with_bs (<OTbs>). 8380# 8381# FEATURES NOT YET DESCRIBED IN THIS TERMINFO 8382# 8383# The FUNCT modifier actually works with every normal key by sending 8384# ^AX\r, where X is the sequence normally sent by that key. This is a 8385# sort of meta key not currently describable in terminfo. 8386# 8387# There are quite a few other keys (especially on the 920 models,) but 8388# they are for the most part only useful in block mode. 8389# 8390# These terminals have lots of forms manipulation features, mainly 8391# useful in block mode, including "clear X to nulls" (vs. "clear X to 8392# spaces"; nulls are sentinels for "send X" operations); "send X" 8393# operations for uploading all or part of the screen; and block-mode 8394# editing keys (they don't send escape sequences, but manipulate video 8395# memory directly). Block mode is used for local editing, and protect 8396# mode (in conjunction with the "write protect" attribute, 8397# a.k.a. half-intensity outside of protect mode) is used to control 8398# which parts of the screen are edited/sent/printed (by <mc0>). 8399# 8400# There are at least two major families of ROM, "early" and 8401# A49B1/A49C1; the major difference seems to be that the latter ROMs 8402# support a few extra escape sequences for manipulating the off-screen 8403# memory page, and for sending whole pages back to the host (mainly 8404# useful in block mode.) The descriptions in this file don't use any 8405# of those sequences: set cursor position including page (\E-PYX, 8406# where P is \s for page 0 and ! for page 1 [actually only the LSB of 8407# P is taken into account, so e.g. 0 and 1 work too,] and Y and X are 8408# as in <cup>); read cursor position (\E/), which is analogous to <u9> 8409# and returns PYX\r, where P is \s for page 0 or ! for page 1, and YX 8410# are as in <cup>, and some "send page" features mainly useful for 8411# forms manipulation. 8412# 8413# The keyboard enable (\E") and disable (\E#) sequences are unused, 8414# except that a terminal reset (<is2>) enables the keyboard. 8415# 8416# Auto-flip mode (\Ev) is likely faster than the scrolling mode (\Ew) 8417# enabled in <is2>, but auto-flip is very jarring so we don't use it. 8418# 8419# BUGS 8420# 8421# At least up to the A49B1 and A49C1 ROMs, there are no \Eb and \Ed 8422# sequences (I infer that in some TeleVideo terminal they may invert 8423# and uninvert the display) so the <flash> sequence given here is a 8424# cheesy page-flip instead. 8425# 8426# The back_tab (<cbt>) sequence (\EI) doesn't work according to 8427# tack(1), so it is not included in the descriptions below. 8428# 8429# It's not clear whether auto_left_margin (<bw>) flag should be set 8430# for these terminals; tack says yes, so it is set here, but this 8431# differs from other descriptions I've seen. 8432# 8433# Extension print mode (<mc5>) echoes all characters to the printer 8434# port [in addition to displaying them] except for the page print mode 8435# sequence (<mc4>); this is a slight violation of the terminfo 8436# definition for <mc5> but I don't expect it to cause problems. We 8437# reset to page print mode in <rs1> since it may have been enabled 8438# accidentally. 8439# 8440# The descriptions with plus signs (+) are building blocks. 8441 8442tvi912b-unk|tvi912c-unk|TeleVideo TVI-912B or TVI-912C (no attributes), 8443 OTbs, OTpt, am, bw, 8444 cols#80, it#8, lines#24, 8445 bel=^G, clear=\032$<50>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8446 cup=\E=%p1%' '%+%c%p2%' '%+%c, cuu1=^K, dch1=\EW$<30>, 8447 dl1=\ER$<1*>$<100>, ed=\Ey$<2*>$<10>, el=\ET$<15>, 8448 home=^^, ht=^I, hts=\E1, ich1=\EQ$<30>, 8449 if=/usr/share/tabset/stdcrt, il1=\EE$<1*>$<100>, 8450 ind=\n$<10>, is2=\Ew\EA\E'\E"\E(, kcub1=^H, kcud1=^J, 8451 kcuf1=^L, kcuu1=^K, kdch1=\177, kent=^M, khome=^^, mc4=\EA, 8452 mc5=\E@, rs1=\Ek\010\Em\010\Eq\032, tbc=\E3, u6=%c%c\r, 8453 u7=\E?, u8=%c%c\r, u9=\E?, 8454 8455# This isn't included in the basic capabilities because it is 8456# typically unusable in combination with the full range of video 8457# attributes, since the magic cookie attributes turn into ASCII 8458# control characters, and the half-intensity ("protected") attribute 8459# converts all affected characters to spaces. 8460 8461tvi912b+printer|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C page print support, 8462 mc0=\EP, 8463 8464# This uses half-intensity mode (<dim>) for standout (<smso>), and 8465# exposes no other attributes (half-intensity is the only attribute 8466# that does not generate a magic cookie.) 8467 8468tvi912b+dim|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C half-intensity attribute support, 8469 msgr, 8470 dim=\E), rmso=\E(, sgr=\E%?%p1%p5%|%t)%e(%;, sgr0=\E(, 8471 smso=\E), 8472 8473# Full magic-cookie attribute support, with half-intensity reverse 8474# video for standout. Note that we add a space in the <dim> sequence 8475# to give a consistent magic-cookie count. Also note that <sgr> uses 8476# backspacing (in the TVI-supported order) to apply all requested 8477# attributes with only a single magic cookie. 8478 8479tvi912b+mc|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C full magic-cookie attribute support, 8480 xmc#1, 8481 blink=\E\^, dim=\E)\s, invis=\E_, rev=\Ej, rmso=\E(\Ek, 8482 rmul=\Em, 8483 sgr=\E%?%p1%p5%|%t)%e(%; \010\E%?%p1%p3%|%tj%ek%;\010\E%?%p2%tl%em%;\010\E%?%p7%t_%e%?%p4%t\^%eq%;%;, 8484 sgr0=\E(\Ek\010\Em\010\Eq, smso=\E)\Ej, smul=\El, 8485 8486# This uses the second page memory option to save & restore screen 8487# contents. If your terminal is missing the option, this description 8488# should still work, but that has not been tested. 8489 8490tvi912b+2p|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option support, 8491 flash=\EK$<100>\EK, rmcup=\032$<50>\EK\E=7\s, 8492 smcup=\EK\032$<50>\E(\Ek\010\Em\010\Eq\032$<50>, 8493 8494# This simulates flashing by briefly toggling to the other page 8495# (kludge!) 8496 8497tvi912b+vb|TeleVideo TVI-912B/TVI-920B and TVI-912C/TVI-920C second page memory option "visible bell" support, 8498 bel=\EK$<100>\EK, use=tvi912b+2p, 8499 8500# Function keys (<kf12> .. <kf22> are shifted <kf1> .. <kf11>) 8501 8502tvi920b+fn|TeleVideo TVI-920B and TVI-920C function key support, 8503 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^A`\r, kf13=^Aa\r, 8504 kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, kf17=^Ae\r, kf18=^Af\r, 8505 kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, kf21=^Ai\r, kf22=^Aj\r, 8506 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 8507 kf8=^AG\r, kf9=^AH\r, 8508 8509# Combinations of the basic building blocks 8510 8511tvi912b-2p-unk|tvi912c-2p-unk|tvi912b-unk-2p|tvi912c-unk-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes), 8512 use=tvi912b+2p, use=tvi912b-unk, 8513 8514tvi912b-vb-unk|tvi912c-vb-unk|tvi912b-unk-vb|tvi912c-unk-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes), 8515 use=tvi912b+vb, use=tvi912b-unk, 8516 8517tvi912b-p|tvi912c-p|TeleVideo TVI-912B or TVI-912C (no attributes; page print), 8518 use=tvi912b+printer, use=tvi912b-unk, 8519 8520tvi912b-2p-p|tvi912c-2p-p|tvi912b-p-2p|tvi912c-p-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; no attributes; page print), 8521 use=tvi912b+2p, use=tvi912b+printer, use=tvi912b-unk, 8522 8523tvi912b-vb-p|tvi912c-vb-p|tvi912b-p-vb|tvi912c-p-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; no attributes; page print), 8524 use=tvi912b+vb, use=tvi912b+printer, use=tvi912b-unk, 8525 8526tvi912b-2p|tvi912c-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; half-intensity attribute), 8527 use=tvi912b+2p, use=tvi912b+dim, use=tvi912b-unk, 8528 8529tvi912b-2p-mc|tvi912c-2p-mc|tvi912b-mc-2p|tvi912c-mc-2p|TeleVideo TVI-912B or TVI-912C (second page memory option; magic cookies), 8530 use=tvi912b+2p, use=tvi912b+mc, use=tvi912b-unk, 8531 8532tvi912b-vb|tvi912c-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; half-intensity attribute), 8533 use=tvi912b+vb, use=tvi912b+dim, use=tvi912b-unk, 8534 8535tvi912b-vb-mc|tvi912c-vb-mc|tvi912b-mc-vb|tvi912c-mc-vb|TeleVideo TVI-912B or TVI-912C (second page memory option "visible bell"; magic cookies), 8536 use=tvi912b+vb, use=tvi912b+mc, use=tvi912b-unk, 8537 8538tvi912b|tvi912c|TeleVideo TVI-912B or TVI-912C (half-intensity attribute), 8539 use=tvi912b+dim, use=tvi912b-unk, 8540 8541tvi912b-mc|tvi912c-mc|TeleVideo TVI-912B or TVI-912C (magic cookies), 8542 use=tvi912b+mc, use=tvi912b-unk, 8543 8544tvi920b-unk|tvi920c-unk|TeleVideo TVI-920B or TVI-920C (no attributes), 8545 use=tvi920b+fn, use=tvi912b-unk, 8546 8547tvi920b-2p-unk|tvi920c-2p-unk|tvi920b-unk-2p|tvi920c-unk-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes), 8548 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b-unk, 8549 8550tvi920b-vb-unk|tvi920c-vb-unk|tvi920b-unk-vb|tvi920c-unk-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes), 8551 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b-unk, 8552 8553tvi920b-p|tvi920c-p|TeleVideo TVI-920B or TVI-920C (no attributes; page print), 8554 use=tvi920b+fn, use=tvi912b+printer, use=tvi912b-unk, 8555 8556tvi920b-2p-p|tvi920c-2p-p|tvi920b-p-2p|tvi920c-p-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; no attributes; page print), 8557 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+printer, 8558 use=tvi912b-unk, 8559 8560tvi920b-vb-p|tvi920c-vb-p|tvi920b-p-vb|tvi920c-p-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; no attributes; page print), 8561 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+printer, 8562 use=tvi912b-unk, 8563 8564tvi920b-2p|tvi920c-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; half-intensity attribute), 8565 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+dim, 8566 use=tvi912b-unk, 8567 8568tvi920b-2p-mc|tvi920c-2p-mc|tvi920b-mc-2p|tvi920c-mc-2p|TeleVideo TVI-920B or TVI-920C (second page memory option; magic cookies), 8569 use=tvi920b+fn, use=tvi912b+2p, use=tvi912b+mc, 8570 use=tvi912b-unk, 8571 8572tvi920b-vb|tvi920c-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; half-intensity attribute), 8573 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+dim, 8574 use=tvi912b-unk, 8575 8576tvi920b-vb-mc|tvi920c-vb-mc|tvi920b-mc-vb|tvi920c-mc-vb|TeleVideo TVI-920B or TVI-920C (second page memory option "visible bell"; magic cookies), 8577 use=tvi920b+fn, use=tvi912b+vb, use=tvi912b+mc, 8578 use=tvi912b-unk, 8579 8580tvi920b|tvi920c|TeleVideo TVI-920B or TVI-920C (half-intensity attribute), 8581 use=tvi920b+fn, use=tvi912b+dim, use=tvi912b-unk, 8582 8583tvi920b-mc|tvi920c-mc|TeleVideo TVI-920B or TVI-920C (magic cookies), 8584 use=tvi920b+fn, use=tvi912b+mc, use=tvi912b-unk, 8585 8586# Televideo 921 and variants 8587# From: Tim Theisen <tim@cs.wisc.edu> 22 Sept 1995 8588# (tvi921: removed :ko=bt: before translation, I see no backtab cap; 8589# also added empty <acsc> to suppress tic warning -- esr) 8590tvi921|televideo model 921 with sysline same as page & real vi function, 8591 OTbs, OTpt, am, hs, xenl, xhp, 8592 cols#80, lines#24, xmc#0, 8593 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 8594 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, 8595 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, 8596 el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, 8597 if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, invis@, 8598 is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, kcub1=^H, 8599 kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER$<1*/>, 8600 ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, nel=^M^J, rmacs=\E%%, 8601 rmir=, smacs=\E$, smir=, tsl=\Ef\EG0, use=adm+sgr, 8602# without the beeper 8603# (tvi92B: removed :ko=bt: before translation, I see no backtab cap; 8604# also added empty <acsc> to suppress tic warning -- esr) 8605tvi92B|televideo model 921 with sysline same as page & real vi function & no beeper, 8606 am, hs, xenl, xhp, 8607 cols#80, lines#24, xmc#0, 8608 acsc=, clear=^Z, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 8609 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<3/>, cuu1=^K, 8610 cvvis=\E.2, dch1=\EW, dl1=\ER$<1*/>, dsl=\Ef\r\Eg, ed=\EY, 8611 el=\ET, flash=\Eb$<200/>\Ed, fsl=\Eg, home=^^, ht=^I, 8612 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, 8613 invis@, is2=\El\E"\EF1\E.3\017\EA\E<, kbs=^H, kclr=^Z, 8614 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, 8615 kdl1=\ER$<1*/>, ked=\EY, kel=\ET, kich1=\EQ, kil1=\EE, 8616 nel=^M^J, rmacs=\E%%, smacs=\E$, tsl=\Ef\EG0, use=adm+sgr, 8617# (tvi92D: removed :ko=bt: before translation, I see no backtab cap -- esr) 8618tvi92D|tvi92B with DTR instead of XON/XOFF & better padding, 8619 dl1=\ER$<2*/>, il1=\EE$<2*/>, 8620 is2=\El\E"\EF1\E.3\016\EA\E<, kdl1=\ER$<2*/>, 8621 kil1=\EE$<2*/>, use=tvi92B, 8622 8623# (tvi924: This used to have <dsl=\Es0>, <fsl=\031>. I put the new strings 8624# in from a BSD termcap file because it looks like they do something the 8625# old ones skip -- esr) 8626tvi924|televideo tvi924, 8627 am, bw, hs, in, mir, msgr, xenl, xon, 8628 cols#80, it#8, lines#24, wsl#80, xmc#0, 8629 bel=^G, blink=\EG2, cbt=\EI, civis=\E.0, clear=\E*0, 8630 cnorm=\E.3, cr=^M, csr=\E_%p1%{32}%+%c%p2%{32}%+%c, 8631 cub1=^H, cud1=^V, cuf1=^L, 8632 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, cvvis=\E.1, 8633 dch1=\EW, dl1=\ER, dsl=\Es0\Ef\031, ed=\Ey, el=\Et, 8634 flash=\Eb$<200>\Ed, fsl=\031\Es1, home=^^, ht=^I, hts=\E1, 8635 ich1=\EQ, if=/usr/share/tabset/stdcrt, il1=\EE, ind=^J, 8636 invis@, is1=\017\E%\E'\E(\EDF\EC\EG0\EN0\Es0\Ev0, 8637 kbs=^H, kclr=\E*0, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 8638 kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A@\r, kf1=^AA\r, 8639 kf10=^AJ\r, kf11=^AK\r, kf12=^AL\r, kf13=^AM\r, kf14=^AN\r, 8640 kf15=^AO\r, kf2=^AB\r, kf3=^AC\r, kf4=^AD\r, kf5=^AE\r, 8641 kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, kf9=^AI\r, khome=^^, 8642 kich1=\EQ, kil1=\EE, lf0=F1, lf1=F2, lf10=F11, lf2=F3, lf3=F4, 8643 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, 8644 pfkey=\E|%p1%{49}%+%c%p2%s\031, ri=\Ej, tbc=\E3, tsl=\Ef, 8645 use=adm+sgr, 8646 8647# TVI925 DIP switches. In each of these, D = Down and U = Up, 8648# 8649# Here are the settings for the external (baud) switches (S1): 8650# 8651# Position Baud 8652# 7 8 9 10 [Printer] 8653# 1 2 3 4 [Main RS232] 8654# ----------------------------------------------------- 8655# D D D D 9600 8656# D D D U 50 8657# D D U D 75 8658# D D U U 110 8659# D U D D 135 8660# D U D U 150 8661# D U U D 300 8662# D U U U 600 8663# U D D D 1200 8664# U D D U 1800 8665# U D U D 2400 8666# U D U U 3600 8667# U U D D 4800 8668# U U D U 7200 8669# U U U D 9600 8670# U U U U 19200 8671# 8672# 8673# Settings for word length and stop-bits (S1) 8674# 8675# Position Description 8676# 5 6 8677# --------------------------- 8678# U - 7-bit word 8679# D - 8-bit word 8680# - U 2 stop bits 8681# - D 1 stop bit 8682# 8683# 8684# S2 (external) settings 8685# 8686# Position Up Dn Description 8687# -------------------------------------------- 8688# 1 X Local edit 8689# X Duplex edit (transmit editing keys) 8690# -------------------------------------------- 8691# 2 X 912/920 emulation 8692# X 925 8693# -------------------------------------------- 8694# 3 X 8695# 4 X No parity 8696# 5 X 8697# -------------------------------------------- 8698# 3 X 8699# 4 X Odd parity 8700# 5 X 8701# -------------------------------------------- 8702# 3 X 8703# 4 X Even parity 8704# 5 X 8705# -------------------------------------------- 8706# 3 X 8707# 4 X Mark parity 8708# 5 X 8709# -------------------------------------------- 8710# 3 X 8711# 4 X Space parity 8712# 5 X 8713# -------------------------------------------- 8714# 6 X White on black display 8715# X Black on white display 8716# -------------------------------------------- 8717# 7 X Half Duplex 8718# 8 X 8719# -------------------------------------------- 8720# 7 X Full Duplex 8721# 8 X 8722# -------------------------------------------- 8723# 7 X Block mode 8724# 8 X 8725# -------------------------------------------- 8726# 9 X 50 Hz 8727# X 60 Hz 8728# -------------------------------------------- 8729# 10 X CR/LF (Auto LF) 8730# X CR only 8731# 8732# S3 (internal switch) settings: 8733# 8734# Position Up Dn Description 8735# -------------------------------------------- 8736# 1 X Keyclick off 8737# X Keyclick on 8738# -------------------------------------------- 8739# 2 X English 8740# 3 X 8741# -------------------------------------------- 8742# 2 X German 8743# 3 X 8744# -------------------------------------------- 8745# 2 X French 8746# 3 X 8747# -------------------------------------------- 8748# 2 X Spanish 8749# 3 X 8750# -------------------------------------------- 8751# 4 X Blinking block cursor 8752# 5 X 8753# -------------------------------------------- 8754# 4 X Blinking underline cursor 8755# 5 X 8756# -------------------------------------------- 8757# 4 X Steady block cursor 8758# 5 X 8759# -------------------------------------------- 8760# 4 X Steady underline cursor 8761# 5 X 8762# -------------------------------------------- 8763# 6 X Screen blanking timer (ON) 8764# X Screen blanking timer (OFF) 8765# -------------------------------------------- 8766# 7 X Page attributes 8767# X Line attributes 8768# -------------------------------------------- 8769# 8 X DCD disconnected 8770# X DCD connected 8771# -------------------------------------------- 8772# 9 X DSR disconnected 8773# X DSR connected 8774# -------------------------------------------- 8775# 10 X DTR Disconnected 8776# X DTR connected 8777# -------------------------------------------- 8778# 8779# (tvi925: BSD has <clear=\E*>. I got <is2> and <ri> from there -- esr) 8780tvi925|televideo 925, 8781 OTbs, am, bw, hs, ul, 8782 cols#80, lines#24, xmc#1, 8783 bel=^G, cbt=\EI, clear=^Z, cnorm=\E.4, cr=^M, cub1=^H, cud1=^V, 8784 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 8785 cvvis=\E.2, dch1=\EW, dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, 8786 flash=\Eb$<200>\Ed, fsl=^M\Eg, home=^^, ht=^I, hts=\E1, 8787 ich1=\EQ, il1=\EE, ind=^J, invis@, is2=\El\E", kbs=^H, kclr=^Z, 8788 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 8789 ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, 8790 kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, 8791 kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, ri=\Ej, tbc=\E3, 8792 tsl=\Eh\Ef, use=adm+sgr, 8793# TeleVideo 925 from Mitch Bradley <sun!wmb> via BRL 8794# to avoid "magic cookie" standout glitch: 8795tvi925-hi|TeleVideo Model 925 with half intensity standout mode, 8796 xmc@, 8797 kbs=^H, kcub1=^H, kcud1=^J, rmso=\E(, smso=\E), use=tvi925, 8798 8799# From: Todd Litwin <litwin@litwin.jpl.nasa.gov> 28 May 1993 8800# Originally Tim Curry, Univ. of Central Fla., <duke!ucf-cs!tim> 5/21/82 8801# for additional capabilities, 8802# The following tvi descriptions from B:pjphar and virus!mike 8803# is for all 950s. It sets the following attributes: 8804# full duplex (\EDF) write protect off (\E() 8805# conversation mode (\EC) graphics mode off (\E%) 8806# white on black (\Ed) auto page flip off (\Ew) 8807# turn off status line (\Eg) clear status line (\Ef\r) 8808# normal video (\E0) monitor mode off (\EX or \Eu) 8809# edit mode (\Er) load blank char to space (\Ee\040) 8810# line edit mode (\EO) enable buffer control (^O) 8811# protect mode off (\E\047) duplex edit keys (\El) 8812# program unshifted send key to send line all (\E016) 8813# program shifted send key to send line unprotected (\E004) 8814# set the following to nulls: 8815# field delimiter (\Ex0\200\200) 8816# line delimiter (\Ex1\200\200) 8817# start-protected field delimiter (\Ex2\200\200) 8818# end-protected field delimiter (\Ex3\200\200) 8819# set end of text delimiter to carriage return/null (\Ex4\r\200) 8820# 8821# TVI 950 Switch Setting Reference Charts 8822# 8823# TABLE 1: 8824# 8825# S1 1 2 3 4 5 6 7 8 9 10 8826# +-----------------------+-----+-----+-----------------------+ 8827# | Computer Baud Rate |Data |Stop | Printer Baud Rate | 8828# | |Bits |Bits | | 8829# +------+-----------------------+-----+-----+-----------------------+ 8830# | Up | See | 7 | 2 | See | 8831# +------+-----------------------+-----+-----+-----------------------+ 8832# | Down | TABLE 2 | 8 | 1 | TABLE 2 | 8833# +------+-----------------------+-----+-----+-----------------------+ 8834# 8835# 8836# S2 1 2 3 4 5 6 7 8 9 10 8837# +-----+-----+-----------------+-----+-----------+-----+-----+ 8838# |Edit |Cursr| Parity |Video|Transmiss'n| Hz |Click| 8839# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 8840# | Up | Dplx|Blink| See |GonBk| See | 60 | Off | 8841# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 8842# | Down |Local|St'dy| TABLE 3 |BkonG| CHART | 50 | On | 8843# +------+-----+-----+-----------------+-----+-----------+-----+-----+ 8844# 8845# TABLE 2: 8846# 8847# +-----------+-----+-----+-----+-----+-----------+ 8848# | Display | 1 | 2 | 3 | 4 | Baud | 8849# +-----------+-----+-----+-----+-----+ | 8850# | Printer | 7 | 8 | 9 | 10 | Rate | 8851# +-----------+-----+-----+-----+-----+-----------+ 8852# | D | D | D | D | 9600 | 8853# | U | D | D | D | 50 | 8854# | D | U | D | D | 75 | 8855# | U | U | D | D | 110 | 8856# | D | D | U | D | 135 | 8857# | U | D | U | D | 150 | 8858# | D | U | U | D | 300 | 8859# | U | U | U | D | 600 | 8860# | D | D | D | U | 1200 | 8861# | U | D | D | U | 1800 | 8862# | D | U | D | U | 2400 | 8863# | U | U | D | U | 3600 | 8864# | D | D | U | U | 4800 | 8865# | U | D | U | U | 7200 | 8866# | D | U | U | U | 9600 | 8867# | U | U | U | U | 19200 | 8868# +-----+-----+-----+-----+-----------+ 8869# 8870# TABLE 3: 8871# +-----+-----+-----+-----------+ 8872# | 3 | 4 | 5 | Parity | 8873# +-----+-----+-----+-----------+ 8874# | X | X | D | None | 8875# | D | D | U | Odd | 8876# | D | U | U | Even | 8877# | U | D | U | Mark | 8878# | U | U | U | Space | 8879# +-----+-----+-----+-----------+ 8880# X = don't care 8881# 8882# CHART: 8883# +-----+-----+-----------------+ 8884# | 7 | 8 | Communication | 8885# +-----+-----+-----------------+ 8886# | D | D | Half Duplex | 8887# | D | U | Full Duplex | 8888# | U | D | Block | 8889# | U | U | Local | 8890# +-----+-----+-----------------+ 8891# 8892# (tvi950: early versions had obsolete ":ma=^Vj^Kk^Hh^Ll^^H:". 8893# I also inserted <ich1> and <kich1>; the :ko: string indicated that <ich> 8894# should be present and all tvi native modes use the same string for this. 8895# Finally, note that BSD has cud1=^V. -- esr) 8896tvi950|televideo 950, 8897 OTbs, am, hs, mir, msgr, xenl, xon, 8898 cols#80, it#8, lines#24, xmc#1, 8899 acsc=b\011c\014d\re\ni\013, bel=^G, cbt=\EI, clear=\E*, 8900 cr=^M, cub1=^H, cud1=^J, cuf1=^L, 8901 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 8902 dl1=\ER, dsl=\Eg\Ef\r, ed=\Ey, el=\Et, flash=\Eb$<200/>\Ed, 8903 fsl=^M, home=^^, ht=^I, hts=\E1, ich1=\EQ, il1=\EE, ind=^J, 8904 invis@, 8905 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\Ef\r, 8906 kbs=^H, kcbt=\EI, kclr=\E*, kcub1=^H, kcud1=^V, kcuf1=^L, 8907 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\Ey, kel=\Et, kf0=^A0\r, 8908 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 8909 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 8910 kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, ri=\Ej, rmacs=^X, 8911 rmir=\Er, smacs=^U, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, 8912 use=adm+sgr, 8913# 8914# is for 950 with two pages adds the following: 8915# set 48 line page (\E\\2) 8916# place cursor at page 0, line 24, column 1 (\E-07 ) 8917# set local (no send) edit keys (\Ek) 8918# 8919# two page 950 adds the following: 8920# when entering ex, set 24 line page (\E\\1) 8921# when exiting ex, reset 48 line page (\E\\2) 8922# place cursor at 0,24,1 (\E-07 ) 8923# set duplex (send) edit keys (\El) when entering vi 8924# set local (no send) edit keys (\Ek) when exiting vi 8925# 8926tvi950-2p|televideo950 w/2 pages, 8927 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07 \011, 8928 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8929 smkx=\El, use=tvi950, 8930# 8931# is for 950 with four pages adds the following: 8932# set 96 line page (\E\\3) 8933# place cursor at page 0, line 24, column 1 (\E-07 ) 8934# 8935# four page 950 adds the following: 8936# when entering ex, set 24 line page (\E\\1) 8937# when exiting ex, reset 96 line page (\E\\3) 8938# place cursor at 0,24,1 (\E-07 ) 8939# 8940tvi950-4p|televideo950 w/4 pages, 8941 is2=\EDF\EC\Ed\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07 \011, 8942 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8943 smkx=\El, use=tvi950, 8944# 8945# <is2> for reverse video 950 changes the following: 8946# set reverse video (\Ed) 8947# 8948# set vb accordingly (\Ed ...delay... \Eb) 8949# 8950tvi950-rv|televideo950 rev video, 8951 flash=\Ed$<200/>\Eb, 8952 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\El\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0, 8953 use=tvi950, 8954 8955# tvi950-rv-2p uses the appropriate entries from 950-2p and 950-rv 8956tvi950-rv-2p|televideo950 rev video w/2 pages, 8957 flash=\Ed$<200/>\Eb, 8958 is2=\EDF\EC\Eb\EG0\Eg\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\2\E-07\s, 8959 rmcup=\E\\2\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8960 smkx=\El, use=tvi950, 8961 8962# tvi950-rv uses the appropriate entries from 950-4p and 950-rv 8963tvi950-rv-4p|televideo950 rev video w/4 pages, 8964 flash=\Ed$<200/>\Eb, 8965 is2=\EDF\EC\Eb\EG0\Er\EO\E'\E(\E%\Ew\EX\Ee \017\011\Ek\E016\E004\Ex0\0\0\Ex1\0\0\Ex2\0\0\011\Ex3\0\0\Ex4\r\0\E\\3\E-07\s, 8966 rmcup=\E\\3\E-07\s, rmkx=\Ek, smcup=\E\\1\E-07\s, 8967 smkx=\El, use=tvi950, 8968# From: Andreas Stolcke <stolcke@icsi.berkeley.edu> 8969# (tvi955: removed obsolete ":ma:=^Vj^Kk^Hh^Ll^^H"; 8970# removed incorrect (and overridden) ":do=^J:"; fixed broken continuations in 8971# the :rs: string, inserted the <ich> implied by the termcap :ko: string. Note 8972# the :ko: string had :cl: in it, which means that one of the original 8973# <clear=\E*>, <kclr=\EY> had to be wrong; set <kclr=\E*> because that's what 8974# the 950 has. Finally, corrected the <kel> string to match the 950 and what 8975# ko implies -- esr) 8976# If the BSD termcap file was right, <cup=\E=%p1%{32}%+%c%p2%{32}%+%c> would 8977# also work. 8978tvi955|televideo 955, 8979 OTbs, mc5i, msgr@, 8980 it#8, xmc@, 8981 acsc=0_`RjHkGlFmEnIoPqKsQtMuLvOwNxJ, blink=\EG2, 8982 civis=\E.0, cnorm=\E.2, cud1=^V, cup=\E[%i%p1%d;%p2%dH, 8983 cvvis=\E.1, dim=\E[=5h, ind@, invis=\EG1, 8984 is2=\E[=3l\EF1\Ed\EG0\E[=5l\E%\El, kctab=\E2, khts=\E1, 8985 knp=\EK, kpp=\EJ, krmir=\EQ, ktbc=\E3, mc0=\EP, rmacs=\E%%, 8986 rmam=\E[=7l, rmxon=^N, 8987 rs1=\EDF\EC\Eg\Er\EO\E'\E(\Ew\EX\Ee \017\E0P\E6\0\E0p\E4\0\Ef\r, 8988 sgr0=\EG0\E[=5l, smacs=\E$, smam=\E[=7h, smxon=^O, 8989 use=tvi950, 8990tvi955-w|955-w|televideo955 w/132 cols, 8991 cols#132, 8992 is2=\E[=3h\EF1\Ed\EG0\E[=5l\E%\El, use=tvi955, 8993# use half-intensity as normal mode, full intensity as <bold> 8994tvi955-hb|955-hb|televideo955 half-bright, 8995 bold=\E[=5l, dim@, is2=\E[=3l\EF1\Ed\EG0\E[=5h\E%\El, 8996 sgr0=\EG0\E[=5h, use=tvi955, 8997# From: Humberto Appleton <beto@cs.utexas.edu>, 880521 UT Austin 8998# (tvi970: removed ":sg#0:"; removed <rmso>=\E[m, <rmul>=\E[m; 8999# added <am>/<csr>/<home>/<hpa>/<vpa>/<smcup>/<rmcup> from BRL. 9000# According to BRL we could have <rmkx>=\E>, <smkx>=\E= but I'm not sure what 9001# it does to the function keys. I deduced <rmam>/<smam>. 9002# also added empty <acsc> to suppress tic warning, -- esr) 9003tvi970|televideo 970, 9004 OTbs, OTpt, am, da, db, mir, msgr, 9005 cols#80, it#8, lines#24, 9006 acsc=, cbt=\E[Z, clear=\E[H\E[2J, csr=\E[%i%p1%d;%p2%dr, 9007 cub1=^H, cud1=\ED, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, 9008 cuu1=\EM, cvvis=\E[1Q, dch1=\E[P, dl1=\E[M, dsl=\Eg\Ef\r, 9009 ed=\E[J, el=\E[K, flash=\E[5m$<200/>\E[m, home=\E[H, 9010 hpa=\E[%i%p1%dG, ht=^I, il1=\E[L, 9011 is2=\E<\E[?21l\E[19h\E[1Q\E[10l\E[7l\E[H\E[2J, 9012 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 9013 kf1=\E?a, kf2=\E?b, kf3=\E?c, kf4=\E?d, kf5=\E?e, kf6=\E?f, 9014 kf7=\E?g, kf8=\E?h, kf9=\E?i, khome=\E[H, ri=\EM, rmacs=\E(B, 9015 rmam=\E[?7h, rmcup=, rmir=\E[4l, rmso=\E[m, rmul=\E[m, 9016 sgr0=\E[m, smacs=\E(B, smam=\E[?7l, 9017 smcup=\E[?20l\E[?7h\E[1Q, smir=\E[4h, smso=\E[7m, 9018 smul=\E[4m, vpa=\E[%i%p1%dd, 9019tvi970-vb|televideo 970 with visual bell, 9020 flash=\E[?5h\0\0\0\0\0\0\0\0\0\0\0\0\0\E[?5l, 9021 use=tvi970, 9022tvi970-2p|televideo 970 with using 2 pages of memory, 9023 rmcup=\E[H\E[J\E[V, smcup=\E[U\E[?20l\E[?7h\E[1Q, 9024 use=tvi970, 9025# Works with vi and rogue. NOTE: Esc v sets autowrap on, Esc u sets 80 chars 9026# per line (rather than 40), Esc K chooses the normal character set. Not sure 9027# padding is needed, but adapted from the tvi920c termcap. The <smso> and 9028# <smul> strings are klutzy, but at least use no screen space. 9029# (tvipt: removed obsolete ":ma=^Kk^Ll^R^L:". I wish we knew <rmam>, 9030# its absence means <smam>=\Ev isn't safe to use. -- esr) 9031# From: Gene Rochlin <armsis@amber.berkeley.edu> 9/19/84. 9032# The <ed>/<kf0>/<kf1>/<khome>/<mc4>, and <mc5> caps are from BRL, which says: 9033# F1 and F2 should be programmed as ^A and ^B; required for UNIFY. 9034tvipt|televideo personal terminal, 9035 OTbs, am, 9036 cols#80, lines#24, 9037 cbt=\EI, clear=^Z, cub1=^H, cuf1=^L, 9038 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER$<5*>, 9039 ed=\EY, el=\ET, home=^^, if=/usr/share/tabset/stdcrt, 9040 il1=\EE$<5*>, is2=\Ev\Eu\EK, kbs=^H, kcub1=^H, kcud1=^J, 9041 kcuf1=^L, kcuu1=^K, kf0=^A, kf1=^B, khome=^^, mc4=^T, mc5=^R, 9042 rmso=\EF, rmul=\EF, smso=\EG1@A\EH, smul=\EG1B@\EH, 9043# From: Nathan Peterson <nathan@sco.com>, 03 Sep 1996 9044tvi9065|televideo 9065, 9045 am, bw, chts, hs, mc5i, mir, msgr, xenl, xon, 9046 cols#80, it#8, lh#1, lines#25, lm#0, lw#9, ma#4, nlab#8, vt#0, 9047 wnum#0, wsl#30, 9048 acsc='r0_jhkglfmeniopqksqtmulvownxj, bel=^G, 9049 blink=\EG2, bold=\EG\,, cbt=\EI, civis=\E.0, clear=^Z, 9050 cnorm=\E.3, cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, 9051 cub1=^H, cud=\E[%p1%dB, cud1=^V, cuf=\E[%p1%dC, cuf1=^L, 9052 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu=\E[%p1%dA, 9053 cuu1=^K, cvvis=\E.2, dch=\E[%p1%dP, dch1=\EW, dim=\EGp, 9054 dl=\E[%p1%dM, dl1=\ER, dsl=\E_30\r, ech=\E[%p1%d@, ed=\EY, 9055 el=\ET, flash=\Eb$<15>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, 9056 ich=\E[%p1%d@, if=/usr/share/tabset/stdcrt, 9057 il=\E[%p1%dL, il1=\EE, ind=^J, indn=\E[%p1%dS, invis=\EG1, 9058 ip=$<3>, 9059 is1=\E"\E%\E'\E(\EG@\EO\EX\E[=5l\E[=6l\E[=7h\Ed\Er, 9060 is2=\EF2\EG0\E\\L, is3=\E<\E[=4l\E[=8h, kHOM=\E\s\s\s, 9061 kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, 9062 kdch1=\EW, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, 9063 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 9064 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, ll=\E[25;1H, 9065 mc0=\E[0;0i, mc4=\Ea, mc5=\E`, nel=^M^J, 9066 pfkey=\E|%p1%{48}%+%c3%p2%s\031, 9067 pfloc=\E|%p1%{48}%+%c2%p2%s\031, 9068 pfx=\E|%p1%{48}%+%c1%p2%s\031, 9069 pln=\E_%p1%{63}%+%c%p2%s\r, prot=\E&, 9070 rep=\E[%p2%db%p1%c, rev=\EG4, 9071 rf=/usr/share/tabset/stdcrt, ri=\Ej, rin=\E[%p1%dT, 9072 rmacs=\E%%, rmam=\E[=7l, rmcup=\E.3\Er\E[1;25r\E[25;0H, 9073 rmdc=\0, rmir=\Er, rmln=\E[4;1v, rmso=\EG0, rmul=\EG0, 9074 rmxon=^N, rs1=\EC\EDF\E[0;0v\E[8;1v\E[=65l, 9075 rs2=\E.b\E[10;20v\E[14;1v\E[3;0v\E[7;0v\E[=11.h\E[=12.h\E[=13.h\E[=14.h\E[=15l\E[=20h\E[=60l\E[=61h\E[=9l\E[=10l\E[=21l\E[=23l\E[=3l\E_40\E_50\En\Ew\Ee \Ex0\0\0\Ex1\0\0\Ex2\0\0\Ex3\0\0\Ex4\0\0\E1, 9076 rs3=\E[=19h\E.3\E9\E0O\0\0\0\0\0\E0o\0\0\0\0\0\E0J\177\0\0\0\0, 9077 sgr=\EG0%?%p1%t\EGt%;%?%p2%t\EG8%;%?%p3%t\EG4%;%?%p4%t\EG2%;%?%p5%t\EGp%;%?%p6%t\EG\,%;%?%p7%t\EG1%;%?%p8%t\E&%;%?%p9%t\E$%e\E%%%;, 9078 sgr0=\EG0\E%, smacs=\E$, smam=\E=7h, smcup=\E.2, smdc=\Er, 9079 smir=\Eq, smln=\E[4;2v, smso=\EGt, smul=\EG8, smxon=^O, 9080 tbc=\E3, tsl=\E[4;1v\E_30, uc=\EG8\EG0, 9081 9082#### Visual (vi) 9083# 9084# In September 1993, Visual Technology of Westboro, Massachusetts, 9085# merged with White Pine Software of Nashua, New Hampshire. 9086# 9087# White Pine Software may be contacted at +1 603/886-9050. 9088# Or visit White Pine on the World Wide Web at URL http://www.wpine.com. 9089# 9090 9091# Visual 50 from Beau Shekita, BTL-Whippany <whuxlb!ejs> 9092# Recently I hacked together the following termcap for Visual 9093# Technology's Visual 50 terminal. It's a slight modification of 9094# the vt52 termcap. 9095# It's intended to run when the Visual 50 is in vt52 emulation mode 9096# (I know what you're thinking; if it's emulating a vt52, then why 9097# another termcap? Well, it turns out that the Visual 50 can handle 9098# <dl1> and db(?) among other things, which the vt52 can't) 9099# The termcap works OK for the most part. The only problem is on 9100# character inserts. The whole line gets painfully redrawn for each 9101# character typed. Any suggestions? 9102# Beau's entry is combined with the vi50 entry from University of Wisconsin. 9103# Note especially the <il1> function. <kf4>-<kf6> are really l4-l6 in 9104# disguise; <kf7>-<kf9> are really l1-l3. 9105vi50|visual 50, 9106 OTbs, OTpt, am, da, db, msgr, 9107 cols#80, it#8, lines#24, 9108 OTnl=^J, bel=^G, cbt=\Ez$<4/>, clear=\EH\EJ, cr=^M, cub1=^H, 9109 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 9110 cuu1=\EA, dl1=\EM$<3*/>, ed=\EJ, el=\EK$<16/>, home=\EH, 9111 ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, 9112 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\EV, 9113 kf5=\EE, kf6=\E], kf7=\EL, kf8=\Ev, kf9=\EM, khome=\EH, 9114 nel=^M^J, ri=\EI, rmso=\ET, rmul=\EW, smso=\EU, smul=\ES, 9115# this one was BSD & SCO's vi50 9116vi50adm|visual 50 in adm3a mode, 9117 am, msgr, 9118 cols#80, it#8, lines#24, 9119 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 9120 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\EM, 9121 ed=\Ek, el=\EK, home=\EH, ht=^I, il1=\EL, ind=^J, kbs=^H, 9122 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, 9123 rmso=\ET, smso=\EU, 9124# From: Jeff Siegal <jbs@quiotix.com> 9125vi55|Visual 55, 9126 OTbs, am, mir, msgr, 9127 cols#80, it#8, lines#24, 9128 clear=\Ev, csr=\E_%p1%{65}%+%c%p2%{65}%+%c, cub1=^H, 9129 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 9130 cuu1=\EA, dch1=\Ew, dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, 9131 il1=\EL, is2=\Ev\E_AX\Eb\EW\E9P\ET, kbs=^H, kcub1=\ED, 9132 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EI, rmir=\Eb, rmso=\ET, 9133 smir=\Ea, smso=\EU, 9134 9135# Visual 200 from BRL 9136# The following switch settings are assumed for normal operation: 9137# FULL_DUPLEX SCROLL CR 9138# AUTO_NEW_LINE_ON VISUAL_200_EMULATION_MODE 9139# Other switches may be set for operator convenience or communication 9140# requirements. 9141# Character insertion is kludged in order to get around the "beep" misfeature. 9142# (This cap is commented out because <smir>/<rmir> is more efficient -- esr) 9143# Supposedly "4*" delays should be used for <il1>, <ed>, <clear>, <dch1>, 9144# and <dl1> strings, but we seem to get along fine without them. 9145vi200|visual 200, 9146 OTbs, OTpt, am, mir, msgr, 9147 OTkn#10, cols#80, it#8, lines#24, 9148 acsc=, bel=^G, cbt=\Ez, clear=\Ev, cnorm=\Ec, cr=^M, cub1=^H, 9149 cud1=^J, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 9150 cuu1=\EA, cvvis=\Ed, dch1=\EO, dim=\E4, dl1=\EM, ed=\Ey, 9151 el=\Ex, home=\EH, ht=^I, hts=\E1, il1=\EL, ind=^J, invis=\Ea, 9152 kbs=^H, kclr=\Ev, kctab=\E2, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 9153 kcuu1=\EA, kdch1=\EO, kdl1=\EM, ked=\EJ, kel=\Et, kf0=\E?p, 9154 kf1=\E?q, kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, 9155 kf7=\E?w, kf8=\E?x, kf9=\E?y, khome=\EH, khts=\E1, kich1=\Ei, 9156 kil1=\EL, krmir=\Ej, mc0=\EH\E], mc4=\EX, mc5=\EW, ri=\EI, 9157 rmacs=\EG, rmkx=\E>, rmso=\E3, 9158 rs1=\E3\Eb\Ej\E\El\EG\Ec\Ek\EX, sgr0=\E3\Eb, smacs=\EF, 9159 smkx=\E=, smso=\E4, tbc=\Eg, 9160# The older Visuals didn't come with function keys. This entry uses 9161# <smkx> and <rmkx> so that the keypad keys can be used as function keys. 9162# If your version of vi doesn't support function keys you may want 9163# to use vi200-f. 9164vi200-f|visual 200 no function keys, 9165 is2=\E3\Eb\Ej\E\\\El\EG\Ed\Ek, kf0=\E?p, kf1=\E?q, 9166 kf2=\E?r, kf3=\E?s, kf4=\E?t, kf5=\E?u, kf6=\E?v, kf7=\E?w, 9167 kf8=\E?x, kf9=\E?y, rmkx=\E>, rmso@, smkx=\E=, smso@, 9168 use=vi200, 9169vi200-rv|visual 200 reverse video, 9170 cnorm@, cvvis@, ri@, rmso=\E3, smso=\E4, use=vi200, 9171 9172# the function keys are programmable but we don't reprogram them to their 9173# default values with <is2> because programming them is very verbose. maybe 9174# an initialization file should be made for the 300 and they could be stuck 9175# in it. 9176# (vi300: added <rmam>/<smam> based on init string -- esr) 9177vi300|visual 300 ansi x3.64, 9178 am, bw, mir, xenl, 9179 cols#80, lines#24, 9180 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 9181 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 9182 dch1=\E[P$<40>, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 9183 il1=\E[L, ind=^J, 9184 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[1Q\E[0;1(D\E[8s, 9185 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 9186 kf1=\E_A\E\\, kf2=\E_B\E\\, kf3=\E_C\E\\, kf4=\E_D\E\\, 9187 kf5=\E_E\E\\, kf6=\E_F\E\\, kf7=\E_G\E\\, kf8=\E_H\E\\, 9188 kf9=\E_I\E\\, khome=\E[H, ri=\EM, rmam=\E[?7l, rmir=\E[4l, 9189 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, 9190 smso=\E[1m, smul=\E[4m, 9191# some of the vi300s have older firmware that has the command 9192# sequence for setting editing extent reversed. 9193vi300-old|visual 300 with old firmware (set edit extent reversed), 9194 is2=\E[7s\E[2;3;4;20;?5;?6l\E[12;?7h\E[2Q\E[0;1(D\E[8s, 9195 use=vi300, 9196 9197# Visual 500 prototype entry from University of Wisconsin. 9198# The best place to look for the escape sequences is page A1-1 of the 9199# Visual 500 manual. The initialization sequence given here may be 9200# overkill, but it does leave out some of the initializations which can 9201# be done with the menus in set-up mode. 9202# The :xp: line below is so that emacs can understand the padding requirements 9203# of this slow terminal. :xp: is 10 time the padding factor. 9204# (vi500: removed unknown :xp#4: termcap; 9205# also added empty <acsc> to suppress tic warning -- esr) 9206vi500|visual 500, 9207 am, mir, msgr, 9208 cols#80, it#8, lines#33, 9209 acsc=, cbt=\Ez$<4/>, clear=\Ev$<6*/>, cr=^M, 9210 csr=\E(%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=\EB, 9211 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 9212 dch1=\EO$<3*/>, dl1=\EM$<3*/>, ed=\Ey$<3*/>, 9213 el=\Ex$<16/>, home=\EH, ht=\011$<8/>, il1=\EL\Ex$<3*/>, 9214 ind=^J, 9215 is2=\E3\E\001\E\007\E\003\Ek\EG\Ed\EX\El\E>\Eb\E\\, 9216 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 9217 khome=\EH, nel=^M^J, rmacs=^O, rmir=\Ej, rmso=\E^G, 9218 rmul=\E^C, smacs=^N, smir=\Ei, smso=\E^H, smul=\E^D, 9219 9220# The visual 550 is a visual 300 with tektronix graphics, 9221# and with 33 lines. clear screen is modified here to 9222# also clear the graphics. 9223vi550|visual 550 ansi x3.64, 9224 lines#33, 9225 clear=\030\E[H\E[2J, use=vi300, 9226 9227vi603|visual603|visual 603, 9228 hs, mir, 9229 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 9230 csr=\E[%i%p1%d;%p2%dr, cuf1=\E[C, 9231 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 9232 dsl=\EP2;1~\E\\, ed=\E[J, el=\E[K, fsl=\E\\, il1=\E[L, 9233 ind=\ED, is1=\E>\E[?3l\E[?4l\E[?7h\E[?8h\E[1;24r, 9234 rev=\E[7m, ri=\EM, rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 9235 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=\EP2~, 9236 use=vt100, 9237 9238#### Wyse (wy) 9239# 9240# Wyse Technology 9241# 3471 North First Street 9242# San Jose, CA 95134 9243# Vox: (408)-473-1200 9244# Fax: (408) 473-1222 9245# Web: http://www.wyse.com 9246# 9247# Wyse sales can be reached by phone at 1-800-GET-WYSE. Tech support is at 9248# (800)-800-WYSE (option 5 gets you a human). There's a Web page at the 9249# obvious address, <http://www.wyse.com>. They keep terminfo entries at 9250# <http://www.wyse.co.uk/support/appnotes/idxappnt.htm>. 9251# 9252# Wyse bought out Link Technology, Inc. in 1990 and closed it down in 1995. 9253# They now own the Qume and Amdek brands, too. So these are the people to 9254# talk with about all Link, Qume, and Amdek terminals. 9255# 9256# These entries include a few small fixes. 9257# I canceled the bel capacities in the vb entries. 9258# I made two trivial syntax fixes in the wyse30 entry. 9259# I made some entries relative to adm+sgr. 9260# 9261# 9262# Note: The wyse75, wyse85, and wyse99 have been discontinued. 9263 9264# Although the Wyse 30 can support more than one attribute 9265# it requires magic cookies to do so. Many applications do not 9266# function well with magic cookies. The following terminfo uses 9267# the protect mode to support one attribute (dim) without cookies. 9268# If more than one attribute is needed then the wy30-mc terminfo 9269# should be used. 9270# 9271wy30|wyse30|Wyse 30, 9272 am, bw, hs, mc5i, mir, msgr, xon, 9273 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, 9274 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 9275 civis=\E`0, clear=\E+$<80>, cnorm=\E`1, cr=^M, cub1=^H, 9276 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 9277 cuu1=^K, dch1=\EW$<10>, dim=\E`7\E), dl1=\ER$<1>, 9278 dsl=\EF\r, ed=\EY$<80>, el=\ET, flash=\E`8$<100/>\E`9, 9279 fsl=^M, home=^^, ht=\011$<1>, hts=\E1, il1=\EE$<2>, 9280 ind=\n$<2>, ip=$<2>, is2=\E'\E(\E\^3\E`9\016\024, 9281 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 9282 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, 9283 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 9284 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=^^, kich1=\EQ, 9285 kil1=\EE, knp=\EK, kpp=\EJ, krpl=\Er, ll=^^^K, mc0=\EP, mc4=^T, 9286 mc5=^X, nel=^M^J, pfx=\Ez%p1%{63}%+%c%p2%s\177, 9287 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), ri=\Ej$<3>, 9288 rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 9289 sgr=%?%p1%p5%p8%|%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 9290 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 9291 smso=\E`7\E), tbc=\E0, tsl=\EF, 9292# 9293# This terminal description uses the non-hidden attribute mode 9294# (with magic cookie). 9295# 9296# (wy30-mc: added <smcup> to suppress tic warning --esr) 9297wy30-mc|wyse30-mc|wyse 30 with magic cookies, 9298 msgr@, 9299 ma@, xmc#1, 9300 blink=\EG2, dim=\EGp, prot=\EG0\E), rmacs=\EG0\EH\003, 9301 rmcup=\EG0, rmso=\EG0, 9302 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 9303 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 9304 smso=\EG4, use=wy30, use=adm+sgr, 9305# The mandatory pause used by <flash> does not work with 9306# older versions of terminfo. If you see this effect then 9307# unset xon and delete the / from the delay. 9308# i.e. change $<100/> to $<100> 9309wy30-vb|wyse30-vb|wyse 30 visible bell, 9310 bel@, use=wy30, 9311# 9312# The Wyse 50 can support one attribute (e.g. Dim, Inverse, 9313# Normal) without magic cookies by using the protect mode. 9314# The following description uses this feature, but when more 9315# than one attribute is put on the screen at once, all attributes 9316# will be changed to be the same as the last attribute given. 9317# The Wyse 50 can support more attributes when used with magic 9318# cookies. The wy50-mc terminal description uses magic cookies 9319# to correctly handle multiple attributes on a screen. 9320# 9321wy50|wyse50|Wyse 50, 9322 am, bw, hs, mc5i, mir, msgr, xon, 9323 cols#80, lh#1, lines#24, lw#8, ma#1, nlab#8, wsl#45, 9324 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, cbt=\EI, 9325 civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, cub1=^H, 9326 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 9327 cuu1=^K, dch1=\EW$<1>, dim=\E`7\E), dl1=\ER, dsl=\EF\r, 9328 ed=\EY$<20>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, 9329 home=^^, ht=^I, hts=\E1, il1=\EE, ind=\n$<2>, ip=$<1>, 9330 is1=\E`\:\E`9$<30>, is2=\016\024\E'\E(, kHOM=\E{, kbs=^H, 9331 kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, 9332 kdl1=\ER, ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 9333 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 9334 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 9335 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 9336 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 9337 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, 9338 pfx=\Ez%p1%{63}%+%c%p2%s\177, 9339 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E`7\E), rev=\E`6\E), 9340 ri=\Ej, rmacs=\EH^C, rmir=\Er, rmln=\EA11, rmso=\E(, 9341 sgr=%?%p1%p3%|%t\E`6\E)%e%p5%p8%|%t\E`7\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 9342 sgr0=\E(\EH\003, smacs=\EH^B, smir=\Eq, smln=\EA10, 9343 smso=\E`6\E), tbc=\E0, tsl=\EF, 9344# 9345# This terminal description uses the non-hidden attribute mode 9346# (with magic cookie). 9347# 9348# The mandatory pause used by flash does not work with some 9349# older versions of terminfo. If you see this effect then 9350# unset <xon> and delete the / from the delay. 9351# i.e. change $<100/> to $<100> 9352# (wy50-mc: added <smcup> to suppress tic warning --esr) 9353wy50-mc|wyse50-mc|wyse 50 with magic cookies, 9354 msgr@, 9355 ma@, xmc#1, 9356 blink=\EG2, dim=\EGp, prot=\EG0\E), rev=\EG4, 9357 rmacs=\EG0\EH\003, rmcup=\EG0, rmso=\EG0, 9358 sgr=\EG%{48}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 9359 sgr0=\EG0\E(\EH\003, smacs=\EG0\EH\002, smcup=, 9360 smso=\EGt, use=wy50, use=adm+sgr, 9361wy50-vb|wyse50-vb|wyse 50 visible bell, 9362 bel@, use=wy50, 9363wy50-w|wyse50-w|wyse 50 132-column, 9364 cols#132, lw#7, nlab#16, wsl#97, 9365 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, 9366 use=wy50, 9367wy50-wvb|wyse50-wvb|wyse 50 132-column visible bell, 9368 bel@, use=wy50-w, 9369 9370# 9371# The Wyse 350 is a Wyse 50 with color. 9372# Unfortunately this means that it has magic cookies. 9373# The color attributes are designed to overlap the reverse, dim and 9374# underline attributes. This is nice for monochrome applications 9375# because you can make underline stuff green (or any other color) 9376# but for true color applications it's not so hot because you cannot 9377# mix color with reverse, dim or underline. 9378# To further complicate things one of the attributes must be 9379# black (either the foreground or the background). In reverse video 9380# the background changes color with black letters. In normal video 9381# the foreground changes colors on a black background. 9382# This terminfo uses some of the more advanced features of curses 9383# to display both color and blink. In the final analysis I am not 9384# sure that the wy350 runs better with this terminfo than it does 9385# with the wy50 terminfo (with user adjusted colors). 9386# 9387# The mandatory pause used by flash does not work with 9388# older versions of terminfo. If you see this effect then 9389# unset xon and delete the / from the delay. 9390# i.e. change $<100/> to $<100> 9391# 9392# Bug: The <op> capability resets attributes. 9393wy350|wyse350|Wyse 350, 9394 am, bw, hs, mc5i, mir, xon, 9395 colors#8, cols#80, lh#1, lines#24, lw#8, ncv#55, nlab#8, pairs#8, 9396 wsl#45, xmc#1, 9397 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 9398 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 9399 cub1=^H, cud1=^J, cuf1=^L, 9400 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<1>, 9401 dim=\EGp, dl1=\ER, dsl=\EF\r, ed=\EY$<20>, el=\ET, 9402 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, 9403 il1=\EE, ind=\n$<2>, ip=$<1>, is1=\E`\:\E`9$<30>, 9404 is2=\016\024\E'\E(, is3=\E%?, kHOM=\E{, kbs=^H, kcbt=\EI, 9405 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 9406 ked=\EY, kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, 9407 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 9408 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 9409 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 9410 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 9411 ll=^^^K, mc0=\EP, mc4=^T, mc5=^X, nel=^M^J, oc=\E%?, op=\EG0, 9412 pfx=\Ez%p1%{63}%+%c%p2%s\177, 9413 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\EG0\E), ri=\Ej, 9414 rmacs=\EG0\EH\003, rmir=\Er, rmln=\EA11, setb=, 9415 setf=%?%p1%{0}%=%t%{76}%e%p1%{1}%=%t%{64}%e%p1%{2}%=%t%{8}%e%p1%{3}%=%t%{72}%e%p1%{4}%=%t%{4}%e%p1%{5}%=%t%{68}%e%p1%{6}%=%t%{12}%e%p1%{7}%=%t%{0}%;%PC\EG%gC%gA%+%{48}%+%c, 9416 sgr=%{0}%?%p4%t%{2}%|%;%?%p7%t%{1}%|%;%PA\EG%?%gC%t%gC%e%{0}%?%p1%t%{4}%|%;%?%p2%t%{8}%|%;%?%p3%t%{4}%|%;%?%p5%t%{64}%|%;%;%gA%+%{48}%+%c%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;, 9417 sgr0=\EG0\E(\EH\003%{0}%PA%{0}%PC, smacs=\EG0\EH\002, 9418 smir=\Eq, smln=\EA10, tbc=\E0, tsl=\EF, use=adm+sgr, 9419wy350-vb|wyse350-vb|wyse 350 visible bell, 9420 bel@, use=wy350, 9421wy350-w|wyse350-w|wyse 350 132-column, 9422 cols#132, lw#7, nlab#16, wsl#97, 9423 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<2>, is1=\E`;\E`9$<30>, 9424 use=wy350, 9425wy350-wvb|wyse350-wvb|wyse 350 132-column visible bell, 9426 bel@, use=wy350-w, 9427# 9428# This terminfo description is untested. 9429# The wyse100 emulates an adm31, so the adm31 entry should work. 9430# 9431wy100|wyse 100, 9432 hs, mir, 9433 cols#80, lines#24, xmc#1, 9434 bel=^G, clear=\E;, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 9435 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 9436 dl1=\ER, dsl=\EA31, ed=\EY, el=\ET, fsl=^M, il1=\EE, ind=^J, 9437 invis@, is2=\Eu\E0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 9438 kcuu1=^K, kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, 9439 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, khome=\E{, 9440 rmir=\Er, smir=\Eq, tsl=\EF, use=adm+sgr, 9441# 9442# The Wyse 120/150 has most of the features of the Wyse 60. 9443# This terminal does not need padding up to 9600 baud! 9444# <msgr> should be set but the clear screen fails when in 9445# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear 9446# then set <msgr>. 9447# 9448wy120|wyse120|wy150|wyse150|Wyse 120/150, 9449 am, bw, hs, km, mc5i, mir, msgr, xon, 9450 cols#80, it#8, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, 9451 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 9452 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 9453 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 9454 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 9455 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, 9456 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=\011$<1>, 9457 hts=\E1, il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 9458 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 9459 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 9460 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 9461 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 9462 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 9463 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 9464 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 9465 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 9466 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 9467 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 9468 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 9469 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 9470 rmacs=\EcD, rmam=\Ed., rmcup=\Ew1, rmir=\Er, rmln=\EA11, 9471 rmxon=\Ec20, rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, 9472 rs3=\EwG\Ee($<100>, 9473 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 9474 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 9475 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 9476 tbc=\E0, tsl=\EF, use=adm+sgr, 9477# 9478wy120-w|wyse120-w|wy150-w|wyse150-w|wyse 120/150 132-column, 9479 cols#132, lw#7, nlab#16, wsl#97, 9480 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 9481 rs2=\E`;$<70>, use=wy120, 9482# 9483wy120-25|wyse120-25|wy150-25|wyse150-25|wyse 120/150 80-column 25-lines, 9484 lh@, lines#25, lw@, nlab@, 9485 pln@, rs3=\EwG\Ee)$<100>, use=wy120, 9486# 9487wy120-25-w|wyse120-25-w|wy150-25-w|wyse150-25-w|wyse 120/150 132-column 25-lines, 9488 lh@, lines#25, lw@, nlab@, 9489 pln@, rs3=\EwG\Ee)$<100>, use=wy120-w, 9490# 9491wy120-vb|wyse120-vb|wy150-vb|wyse150-vb|Wyse 120/150 visible bell, 9492 bel@, use=wy120, 9493# 9494wy120-w-vb|wy120-wvb|wyse120-wvb|wy150-w-vb|wyse150-w-vb|Wyse 120/150 132-column visible bell, 9495 bel@, use=wy120-w, 9496# 9497# The Wyse 60 is like the Wyse 50 but with more padding. 9498# The reset strings are slow and the pad times very depending 9499# on other parameters such as font loading. I have tried 9500# to follow the following outline: 9501# 9502# <rs1> -> set personality 9503# <rs2> -> set number of columns 9504# <rs3> -> set number of lines 9505# <is1> -> select the proper font 9506# <is2> -> do the initialization 9507# <is3> -> set up display memory (2 pages) 9508# 9509# The Wyse 60's that have vt100 emulation are slower than the 9510# older Wyse 60's. This change happened mid-1987. 9511# The capabilities effected are <dch1> <dl1> <il1> <ind> <ri> 9512# 9513# The meta key is only half right. This terminal will return the 9514# high order bit set when you hit CTRL-function_key 9515# 9516# It may be useful to assign two function keys with the 9517# values \E=(\s look at old data in page 1 9518# \E=W, look at bottom of page 1 9519# where \s is a space ( ). 9520# 9521# Note: 9522# The Wyse 60 runs faster when the XON/XOFF 9523# handshake is turned off. 9524# 9525# (wy60: we use \E{ rather than ^^ for home (both are documented) to avoid 9526# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr) 9527wy60|wyse60|Wyse 60, 9528 am, bw, hs, km, mc5i, mir, msgr, 9529 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#45, 9530 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 9531 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<100>, 9532 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 9533 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 9534 dch1=\EW$<11>, dclk=\E`b, dim=\EGp, dl1=\ER$<5>, dsl=\EF\r, 9535 ed=\EY$<100>, el=\ET, flash=\E`8$<100/>\E`9, fsl=^M, 9536 home=\E{, ht=\011$<1>, hts=\E1, il1=\EE$<4>, ind=\n$<5>, 9537 ip=$<3>, is1=\EcB0\EcC1, 9538 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 9539 is3=\EwJ\Ew1$<150>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 9540 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 9541 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 9542 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 9543 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 9544 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 9545 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 9546 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<3>, 9547 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 9548 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 9549 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, 9550 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew1, rmir=\Er, 9551 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<150>, 9552 rs2=\EeG$<150>, rs3=\EwG\Ee($<200>, 9553 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 9554 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 9555 smcup=\Ew0, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 9556 tbc=\E0, tsl=\EF, use=adm+sgr, 9557# 9558wy60-w|wyse60-w|wyse 60 132-column, 9559 cols#132, lw#7, nlab#16, wsl#97, 9560 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<16>, ip=$<5>, 9561 rs2=\EeF$<150>\E`;$<150>, use=wy60, 9562# 9563wy60-25|wyse60-25|wyse 60 80-column 25-lines, 9564 lh@, lines#25, lw@, nlab@, 9565 pln@, rs3=\EwG\Ee)$<200>, use=wy60, 9566wy60-25-w|wyse60-25-w|wyse 60 132-column 25-lines, 9567 lh@, lines#25, lw@, nlab@, 9568 pln@, rs3=\EwG\Ee)$<200>, use=wy60-w, 9569# 9570wy60-42|wyse60-42|wyse 60 80-column 42-lines, 9571 lines#42, 9572 clear=\E+$<260>, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<2>, 9573 dch1=\EW$<16>, dl1=\ER$<11>, ed=\Ey$<260>, il1=\EE$<11>, 9574 ind=\n$<9>, ip=$<5>, is1=\EcB2\EcC3, nel=\r\n$<6>, 9575 ri=\Ej$<10>, rs3=\Ee*$<150>, use=wy60, 9576wy60-42-w|wyse60-42-w|wyse 60 132-column 42-lines, 9577 cols#132, lw#7, nlab#16, wsl#97, 9578 clear=\E+$<260>, cup=\Ea%i%p1%dR%p2%dC$<2>, 9579 dch1=\EW$<19>, ed=\Ey$<260>, home=\036$<2>, ip=$<6>, 9580 nel=\r\n$<11>, rs2=\EeF$<150>\E`;$<150>, use=wy60-42, 9581# 9582wy60-43|wyse60-43|wyse 60 80-column 43-lines, 9583 lh@, lines#43, lw@, nlab@, 9584 pln@, rs3=\Ee+$<150>, use=wy60-42, 9585wy60-43-w|wyse60-43-w|wyse 60 132-column 43-lines, 9586 lh@, lines#43, lw@, nlab@, 9587 pln@, rs3=\Ee+$<150>, use=wy60-42-w, 9588# 9589wy60-vb|wyse60-vb|Wyse 60 visible bell, 9590 bel@, use=wy60, 9591wy60-w-vb|wy60-wvb|wyse60-wvb|Wyse 60 132-column visible bell, 9592 bel@, use=wy60-w, 9593 9594# The Wyse-99GT looks at lot like the Wyse 60 except that it 9595# does not have the 42/43 line mode. In the Wyse-60 the "lines" 9596# setup parameter controls the number of lines on the screen. 9597# For the Wyse 99GT the "lines" setup parameter controls the 9598# number of lines in a page. The screen can display 25 lines max. 9599# The Wyse-99GT also has personalities for the VT220 and 9600# Tektronix 4014. But this has no bearing on the native mode. 9601# 9602# (msgr) should be set but the clear screen fails when in 9603# alt-charset mode. Try \EcE\s\s\E+\s if the screen is really clear 9604# then set msgr, else use msgr@. 9605# 9606# u0 -> enter Tektronix mode 9607# u1 -> exit Tektronix mode 9608# 9609wy99gt|wyse99gt|Wyse 99gt, 9610 msgr@, 9611 clear=\E+$<130>, dch1=\EW$<7>, dl1=\ER$<4>, ed=\Ey$<130>, 9612 el=\Et$<5>, flash=\E`8$<100/>\E`9, ht=\011$<1>, 9613 il1=\EE$<4>, ind=\n$<4>, ip=$<2>, is3=\Ew0$<20>, nel@, 9614 ri=\Ej$<3>, rmcup=\Ew0, rs2=\E`\:$<150>, smcup=\Ew1, 9615 u0=\E~>\E8, u1=\E[42h, use=wy60, 9616# 9617wy99gt-w|wyse99gt-w|wyse 99gt 132-column, 9618 cols#132, lw#7, nlab#16, wsl#97, 9619 clear=\E+$<160>, cup=\Ea%i%p1%dR%p2%dC$<2>, 9620 dch1=\EW$<9>, ed=\Ey$<160>, ip=$<4>, rs2=\E`;$<150>, 9621 use=wy99gt, 9622# 9623wy99gt-25|wyse99gt-25|wyse 99gt 80-column 25-lines, 9624 lh@, lines#25, lw@, nlab@, 9625 pln@, rs2=\E`\:$<150>, rs3=\EwG\Ee)$<200>, use=wy99gt, 9626# 9627wy99gt-25-w|wyse99gt-25-w|wyse 99gt 132-column 25-lines, 9628 lh@, lines#25, lw@, nlab@, 9629 pln@, rs2=\E`;$<150>, use=wy99gt-w, 9630# 9631wy99gt-vb|wyse99gt-vb|Wyse 99gt visible bell, 9632 bel@, use=wy99gt, 9633# 9634wy99gt-w-vb|wy99gt-wvb|wyse99gt-wvb|Wyse 99gt 132-column visible bell, 9635 bel@, use=wy99gt-w, 9636 9637# Can't set tabs! Other bugs (ANSI mode only): 9638# - can't redefine function keys (anyway, key redefinition in ANSI mode 9639# is too much complex to be described); 9640# - meta key can't be described (the terminal forgets it when reset); 9641# The xon-xoff handshaking can't be disabled while in ansi personality, so 9642# emacs can't work at speed greater than 9600 baud. No padding is needed at 9643# this speed. 9644# dch1 has been commented out because it causes annoying glittering when 9645# vi deletes one character at the beginning of a line with tabs in it. 9646# dch makes sysgen(1M) have a horrible behaviour when deleting 9647# a screen and makes screen(1) behave badly, so it is disabled too. The nice 9648# thing is that vi goes crazy if smir-rmir are present and both dch-dch1 are 9649# not, so smir and rmir are commented out as well. 9650# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 9651wy99-ansi|Wyse WY-99GT in ansi mode (int'l PC keyboard), 9652 am, km, mc5i, mir, msgr, xenl, 9653 cols#80, it#8, lines#25, vt#3, 9654 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx{{||}}~~, 9655 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9656 clear=\E[H\E[J$<200>, cnorm=\E[34h\E[?25h, cr=^M, 9657 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<1>, 9658 cub1=\010$<1>, cud=\E[%p1%dB, cud1=\ED, 9659 cuf=\E[%p1%dC$<1>, cuf1=\E[C$<1>, 9660 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 9661 cvvis=\E[34l\E[?25h, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 9662 ech=\E[%p1%dX, ed=\E[J$<8*>, el=\E[K$<1>, el1=\E[1K$<1>, 9663 enacs=\E)0, flash=\E[?5h$<30/>\E[?5l, home=\E[H, 9664 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, 9665 il1=\E[L, ind=\n$<1>, invis=\E[8m, 9666 is2=\E7\E[1r\E8\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[4i, 9667 kbs=^H, kcbt=\E[z, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 9668 kcuu1=\EOA, kf1=\EOP, kf10=\E[21~, kf11=\E[23~, 9669 kf12=\E[24~, kf17=\E[K, kf18=\E[31~, kf19=\E[32~, kf2=\EOQ, 9670 kf20=\E[33~, kf21=\E[34~, kf22=\E[35~, kf23=\E[1~, 9671 kf24=\E[2~, kf3=\EOR, kf4=\EOS, kf5=\E[M, kf6=\E[17~, 9672 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, ll=\E[24E, mc0=\E[?19h, 9673 mc4=\E[4i, mc5=\E[5i, nel=\EE, prot=\E[1"q, rc=\E8, 9674 rev=\E[7m, ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 9675 rmkx=\E[?1l, rmso=\E[27m, rmul=\E[24m, 9676 rs2=\E[61"p\E[40h\E[?6l\E[1r\E[2;3;4;13;20;34;39;36l\E[12;16;34h\E[?1;3;4;5;10;18l\E[?7;8;25h\E>\E[?5W\E(B\017\E[24E\E[4i, 9677 sc=\E7, 9678 sgr=\E[0%?%p6%t;1%;%?%p2%t;4%;%?%p1%p3%O%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m\E[%?%p8%t1%;"q%?%p9%t\016%e\017%;, 9679 sgr0=\E[m\017\E["q, smacs=^N, smam=\E[?7h, smir=\E[4h, 9680 smkx=\E[?1h, smso=\E[7m, smul=\E[4m, vpa=\E[%i%p1%dd, 9681 9682# This is the american terminal. Here tabs work fine. 9683# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 9684wy99a-ansi|Wyse WY-99GT in ansi mode (US PC keyboard), 9685 hts=\EH, is3=\E[?5l, rs3=\E[?5l, tbc=\E[3g, use=wy99-ansi, 9686 9687# This terminal (firmware version 02) has a lot of bugs: 9688# - can't set tabs; 9689# - other bugs in ANSI modes (see above). 9690# This description disables handshaking when using cup. This is because 9691# GNU emacs doesn't like Xon-Xoff handshaking. This means the terminal 9692# cannot be used at speeds greater than 9600 baud, because at greater 9693# speeds handshaking is needed even for character sending. If you use 9694# DTR handshaking, you can use even greater speeds. 9695# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 9696wy99f|wy99fgt|wy-99fgt|Wyse WY-99GT (int'l PC keyboard), 9697 am, bw, hs, km, mc5i, mir, msgr, xon, 9698 cols#80, it#8, lines#25, wsl#46, 9699 acsc='x+y.w_vi~j(k'l&m%n)o9q*s8t-u.v\,w+x=, bel=^G, 9700 blink=\EG2, cbt=\EI, civis=\E`0, clear=\E'\E(\032, 9701 cnorm=\E`4\E`1, cr=^M, cub1=^H, cud1=\Ej, cuf1=^L, 9702 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 9703 cvvis=\E`2\E`1, dch1=\EW, dim=\EGp, dl1=\ER, dsl=\EF\r, 9704 ed=\EY$<8*>, el=\ET$<8>, enacs=\Ec@1J$<2000>, 9705 flash=\E\^1$<30/>\E\^0, fsl=^M, home=^^, ht=^I, il1=\EE, 9706 ind=^J, invis=\EG3, 9707 is2=\Eu\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\EcD\024, 9708 ka1=^^, ka3=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, 9709 kcud1=^J, kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, 9710 kf11=^AJ\r, kf12=^AK\r, kf13=^A`\r, kf14=^Aa\r, kf15=^Ab\r, 9711 kf16=^Ac\r, kf17=^Ad\r, kf18=^Ae\r, kf19=^Af\r, kf2=^AA\r, 9712 kf20=^Ag\r, kf21=^Ah\r, kf22=^Ai\r, kf23=^Aj\r, kf24=^Ak\r, 9713 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 9714 kf8=^AG\r, kf9=^AH\r, kprt=\EP, mc0=\EP, mc4=^T, mc5=\Ed#, 9715 nel=^_, prot=\E), rev=\EG4, ri=\Ej, rmacs=\EcD, rmam=\Ed., 9716 rmcup=\Ec21\Ec31, rmir=\Er, rmso=\EG0, rmxon=\Ec20\Ec30, 9717 rs2=\Eu\E~4\Ee6\EC\EDF\Ec21\Ec31\Ec62\Ec72\Ee;\016\E'\EeL\E`9\E\^0\E`1\E`4\Ee.\E`\:\Ee)\Ew\EwG\Ew0\Ee1\EG0\E(\Ed/\Ee4\Ed*\EO\E`I\Er\Ee"\Ec@0B\EcD\024, 9718 sgr=\E(\EG%{48}%?%p1%p3%O%t%{4}%+%;%?%p2%t%{8}%+%;%?%p4%t%{2}%+%;%?%p5%t%{64}%+%;%?%p7%t%{1}%+%;%c%?%p8%t\E)%;%?%p9%t\EcE%e\EcD%;, 9719 sgr0=\E(\EG0, smacs=\EcE, smam=\Ed/, smcup=\Ec20\Ec30, 9720 smir=\Eq, smso=\EG4, smxon=\Ec21\Ec31, tsl=\EF, 9721 9722# This is the american terminal. Here tabs work. 9723# From: Francesco Potorti` <F.Potorti@cnuce.cnr.it>, 24 Aug 1998 9724wy99fa|wy99fgta|wy-99fgta|Wyse WY-99GT (US PC keyboard), 9725 hts=\E1, tbc=\E0, use=wy99f, 9726 9727# 9728# The Wyse 160 is combination of the WY-60 and the WY-99gt. 9729# The reset strings are slow and the pad times very depending 9730# on other parameters such as font loading. I have tried 9731# to follow the following outline: 9732# 9733# <rs1> -> set personality 9734# <rs2> -> set number of columns 9735# <rs3> -> set number of lines 9736# <is1> -> select the proper font 9737# <is2> -> do the initialization 9738# <is3> -> set up display memory (2 pages) 9739# 9740# The display memory may be used for either text or graphics. 9741# When "Display Memory = Shared" the terminal will have more pages 9742# but garbage may be left on the screen when you switch from 9743# graphics to text. If "Display Memory = Unshared" then the 9744# text area will be only one page long. 9745# 9746# (wy160: we use \E{ rather than ^^ for home (both are documented) to avoid 9747# a bug reported by Robert Dunn, <rcdii@inlink.com> -- esr) 9748wy160|wyse160|Wyse 160, 9749 am, bw, hs, km, mc5i, mir, msgr, 9750 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#38, 9751 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 9752 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<30>, 9753 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 9754 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<5>, 9755 dclk=\E`b, dim=\EGp, dl1=\ER$<1>, dsl=\EF\r, ed=\EY$<30>, 9756 el=\ET$<5>, flash=\E`8$<100/>\E`9, fsl=^M, home=\E{, ht=^I, 9757 hts=\E1, il1=\EE$<1>, ind=\n$<1>, ip=$<2>, is1=\EcB0\EcC1, 9758 is2=\Ed$\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 9759 is3=\Ew0$<100>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 9760 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 9761 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 9762 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 9763 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 9764 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, 9765 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=\E{^K, 9766 mc0=\EP, mc4=^T, mc5=\Ed#, nel=\r\n$<1>, 9767 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 9768 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 9769 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<1>, 9770 rmacs=\EcD, rmam=\Ed., rmclk=\E`c, rmcup=\Ew0, rmir=\Er, 9771 rmln=\EA11, rmxon=\Ec20, rs1=\E~!\E~4$<70>, 9772 rs2=\E`\:$<100>, rs3=\EwG\Ee($<140>, 9773 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 9774 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 9775 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, smxon=\Ec21, 9776 tbc=\E0, tsl=\EF, use=adm+sgr, 9777# 9778wy160-w|wyse160-w|wyse 160 132-column, 9779 cols#132, lw#7, nlab#16, wsl#90, 9780 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<9>, 9781 rs2=\EeF$<150>\E`;$<150>, use=wy160, 9782# 9783wy160-25|wyse160-25|wyse 160 80-column 25-lines, 9784 lh@, lines#25, lw@, nlab@, 9785 pln@, rs3=\EwG\Ee)$<200>, use=wy160, 9786wy160-25-w|wyse160-25-w|wyse 160 132-column 25-lines, 9787 lh@, lines#25, lw@, nlab@, 9788 pln@, rs3=\EwG\Ee)$<200>, use=wy160-w, 9789# 9790wy160-42|wyse160-42|wyse 160 80-column 42-lines, 9791 lines#42, 9792 clear=\E+$<50>, dl1=\ER$<2>, ed=\Ey$<50>, il1=\EE$<2>, 9793 ind=\n$<2>, is1=\EcB2\EcC3, nel=\r\n$<2>, ri=\Ej$<2>, 9794 rs3=\Ee*$<150>, use=wy160, 9795wy160-42-w|wyse160-42-w|wyse 160 132-column 42-lines, 9796 cols#132, lw#7, nlab#16, wsl#90, 9797 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<8>, ip=$<3>, 9798 rs2=\EeF$<150>\E`;$<150>, use=wy160-42, 9799# 9800wy160-43|wyse160-43|wyse 160 80-column 43-lines, 9801 lh@, lines#43, lw@, nlab@, 9802 pln@, rs3=\Ee+$<150>, use=wy160-42, 9803wy160-43-w|wyse160-43-w|wyse 160 132-column 43-lines, 9804 lh@, lines#43, lw@, nlab@, 9805 pln@, rs3=\Ee+$<150>, use=wy160-42-w, 9806# 9807wy160-vb|wyse160-vb|Wyse 160 visible bell, 9808 bel@, use=wy160, 9809wy160-w-vb|wy160-wvb|wyse160-wvb|Wyse 160 132-column visible bell, 9810 bel@, use=wy160-w, 9811# 9812# The Wyse 75 is a vt100 lookalike without advanced video. 9813# 9814# The Wyse 75 can support one attribute (e.g. Dim, Inverse, 9815# Underline) without magic cookies. The following description 9816# uses this capability, but when more than one attribute is 9817# put on the screen at once, all attributes will be changed 9818# to be the same as the last attribute given. 9819# The Wyse 75 can support more attributes when used with magic 9820# cookies. The wy75-mc terminal description uses magic cookies 9821# to correctly handle multiple attributes on a screen. 9822# 9823wy75|wyse75|wyse 75, 9824 am, hs, mc5i, mir, msgr, xenl, xon, 9825 cols#80, lines#24, ma#1, pb#1201, wsl#78, 9826 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9827 bel=^G, cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[J$<30>, 9828 cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr$<2>, 9829 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 9830 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 9831 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP$<3*>, 9832 dch1=\E[P$<3>, dim=\E[0t\E[2m, dl=\E[%p1%dM$<1*>, 9833 dl1=\E[M, dsl=\E[>\,\001\001\E[>-\001\001, 9834 ech=\E[%p1%dX, ed=\E[J$<30>, el=\E[K$<3>, el1=\E[1K$<3>, 9835 enacs=\E)0, flash=\E[30h\E\,\E[30l$<250>, fsl=^A, 9836 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 9837 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 9838 ind=\n$<2>, ip=$<1>, 9839 is1=\E[2;4;20;30l\E[?1;10l\E[12h\E[?7;8;25h, 9840 is2=\E>\E(B\E)0\017, is3=\E[m, kbs=^H, kcub1=\E[D, 9841 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\E[M, kel=\E[K, 9842 kf1=\E[?5i, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 9843 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 9844 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf2=\E[?3i, 9845 kf20=\E[34~, kf21=\E[35~, kf3=\E[2i, kf4=\E[@, kf5=\E[M, 9846 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 9847 khlp=\E[28~, khome=\E[H, kich1=\E[@, kil1=\E[L, knp=\E[6~, 9848 kpp=\E[5~, kprt=\E[?5i, kslt=\E[4~, mc0=\E[0i, mc4=\E[4i, 9849 mc5=\E[5i, rc=\E8, rev=\E[1t\E[7m, ri=\EM$<2>, rmacs=^O, 9850 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, 9851 rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<80>, rs3=\E[?5l, 9852 sc=\E7, 9853 sgr=%?%p5%t\E[0t%;%?%p3%p1%|%t\E[1t%;%?%p2%t\E[2t%;%?%p4%t\E[3t%;%?%p1%p2%p3%p4%p5%|%|%|%|%t\E[7m%e\E[m%;%?%p9%t\016%e\017%;, 9854 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9855 smkx=\E[?1l\E[?7h\E=, smso=\E[1t\E[7m, smul=\E[2t\E[4m, 9856 tbc=\E[3g, tsl=\E[>\,\001, use=vt220+keypad, 9857# 9858# This terminal description uses the non-hidden attribute mode 9859# (with magic cookie). 9860# 9861wy75-mc|wyse75-mc|wyse 75 with magic cookies, 9862 msgr@, 9863 ma@, xmc#1, 9864 blink=\E[2p, dim=\E[1p, invis=\E[4p, is3=\E[m\E[p, 9865 rev=\E[16p, rmacs=\E[0p\017, rmso=\E[0p, rmul=\E[0p, 9866 sgr=\E[%{0}%?%p2%p6%|%t%{8}%|%;%?%p1%p3%|%p6%|%t%{16}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{1}%|%;%?%p7%t%{4}%|%;%dp%?%p9%t\016%e\017%;, 9867 sgr0=\E[0p\017, smacs=\E[0p\016, smso=\E[17p, smul=\E[8p, 9868 use=wy75, 9869wy75-vb|wyse75-vb|wyse 75 with visible bell, 9870 pb@, 9871 bel@, use=wy75, 9872wy75-w|wyse75-w|wyse 75 in 132 column mode, 9873 cols#132, wsl#130, 9874 rs2=\E[35h\E[?3h$<80>, use=wy75, 9875wy75-wvb|wyse75-wvb|wyse 75 with visible bell 132 columns, 9876 pb@, 9877 bel@, use=wy75-w, 9878# 9879# Wyse 85 emulating a vt220 7 bit mode. 9880# 24 line screen with status line. 9881# 9882# The vt220 mode permits more function keys but it wipes out 9883# the escape key. I strongly recommend that <f11> be set to 9884# escape (esc). 9885# The terminal may have to be set for 8 data bits and 2 stop 9886# bits for the arrow keys to work. 9887# The Wyse 85 runs faster with XON/XOFF enabled. Also the 9888# <dch> and <ich> work best when XON/XOFF is set. <ich> and 9889# <dch> leave trash on the screen when used without XON/XOFF. 9890# 9891wy85|wyse85|wyse 85, 9892 am, hs, mc5i, mir, msgr, xenl, xon, 9893 cols#80, it#8, lines#24, wsl#80, 9894 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9895 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9896 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, 9897 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9898 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9899 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 9900 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, 9901 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, 9902 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, 9903 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, 9904 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, 9905 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, 9906 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, 9907 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 9908 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcub1=\E[D, kcud1=\E[B, 9909 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf10=\E[21~, 9910 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 9911 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 9912 kf19=\E[33~, kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, 9913 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 9914 khome=\E[26~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 9915 kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, 9916 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, 9917 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, 9918 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, 9919 rs3=\E[?5l, sc=\E7, 9920 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 9921 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9922 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 9923 tsl=\E[40h\E7\E[25;%i%p1%dH, use=vt220+keypad, 9924# 9925# Wyse 85 with visual bell. 9926wy85-vb|wyse85-vb|wyse 85 with visible bell, 9927 bel@, flash=\E[30h\E\,\E[30l$<300>, use=wy85, 9928# 9929# Wyse 85 in 132-column mode. 9930wy85-w|wyse85-w|wyse 85 in 132-column mode, 9931 cols#132, wsl#132, 9932 rs2=\E[35h\E[?3h$<70>, use=wy85, 9933# 9934# Wyse 85 in 132-column mode with visual bell. 9935wy85-wvb|wyse85-wvb|wyse 85 with visible bell 132-columns, 9936 bel@, use=wy85-w, 9937 9938# From: Kevin Turner <kevint@aracnet.com>, 12 Jul 1998 9939# This copes with an apparent firmware bug in the wy85. He writes: 9940# "What I did was change leave the terminal cursor keys set to Normal 9941# (instead of application), and change \E[ to \233 for all the keys in 9942# terminfo. At one point, I found some reference indicating that this 9943# terminal bug (not sending \E[) was acknowledged by Wyse (so it's not just 9944# me), but I can't find that and the server under my bookmark to "Wyse 9945# Technical" isn't responding. So there's the question of wether the wy85 9946# terminfo should reflect the manufactuer's intended behaviour of the terminal 9947# or the actual." 9948wy85-8bit|wyse85-8bit|wyse 85 in 8-bit mode, 9949 am, hs, mc5i, mir, msgr, xenl, xon, 9950 cols#80, it#8, lines#24, wsl#80, 9951 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9952 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9953 clear=\E[H\E[J$<110>, cnorm=\E[?25h, cr=^M, 9954 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 9955 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 9956 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 9957 dch=\E[%p1%dP$<3*>, dch1=\E[P$<3>, dim=\E[2m, 9958 dl=\E[%p1%dM$<3*>, dl1=\E[M$<3>, dsl=\E[40l, 9959 ech=\E[%p1%dX, ed=\E[J$<110>, el=\E[K$<1>, el1=\E[1K, 9960 enacs=\E)0, flash=\E[30h\E\,\E[30l$<300>, 9961 fsl=\E[1;24r\E8, home=\E[H, ht=\011$<1>, hts=\EH, 9962 ich=\E[%p1%d@$<4*>, il=\E[%p1%dL$<5*>, il1=\E[L$<5>, 9963 ind=\n$<3>, invis=\E[8m, ip=$<3>, is1=\E[62;1"p\E[?5W, 9964 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h$<16>, 9965 is3=\E>\E(B\E)0\017\E[m, ka1=\EOw, ka3=\EOy, kb2=\EOu, 9966 kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\233D, kcud1=\233B, 9967 kcuf1=\233C, kcuu1=\233A, kdch1=\2333~, kent=\EOM, 9968 kf1=\EOP, kf10=\23321~, kf11=\23323~, kf12=\23324~, 9969 kf13=\23325~, kf14=\23326~, kf15=\23328~, kf16=\23329~, 9970 kf17=\23331~, kf18=\23332~, kf19=\23333~, kf2=\EOQ, 9971 kf20=\23334~, kf3=\EOR, kf4=\EOS, kf6=\23317~, kf7=\23318~, 9972 kf8=\23319~, kf9=\23320~, kfnd=\2331~, khlp=\23328~, 9973 khome=\23326~, kich1=\2332~, knp=\2336~, kpp=\2335~, 9974 kslt=\2334~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, 9975 mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, ri=\EM$<3>, 9976 rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[m, 9977 rmul=\E[m, rs1=\E[13l\E[3l\E!p, rs2=\E[35h\E[?3l$<70>, 9978 rs3=\E[?5l, sc=\E7, 9979 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;+m%?%p9%t\016%e\017%;, 9980 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 9981 smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 9982 tsl=\E[40h\E7\E[25;%i%p1%dH, 9983# 9984# Wyse 185 emulating a vt320 7 bit mode. 9985# 9986# This terminal always displays 25 lines. These lines may be used 9987# as 24 data lines and a terminal status line (top or bottom) or 9988# 25 data lines. The 48 and 50 line modes change the page size 9989# and not the number of lines on the screen. 9990# 9991# The Compose Character key can be used as a meta key if changed 9992# by set-up. 9993# 9994wy185|wyse185|wyse 185, 9995 am, hs, km, mc5i, mir, msgr, xenl, xon, 9996 cols#80, it#8, lines#24, wsl#80, 9997 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 9998 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 9999 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 10000 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 10001 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10002 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10003 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<3>, 10004 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 10005 dsl=\E7\E[99;0H\E[K\E8, ech=\E[%p1%dX, ed=\E[J$<40>, 10006 el=\E[K, el1=\E[1K, enacs=\E)0, 10007 flash=\E[30h\E\,\E[30l$<100>, fsl=\E[1;24r\E8, 10008 home=\E[H, hpa=\E[%i%p1%d`, ht=^I, hts=\EH, 10009 ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, il1=\E[L$<3>, 10010 ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 10011 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25h, 10012 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 10013 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, 10014 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 10015 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 10016 kf18=\E[32~, kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, 10017 kf4=\EOS, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 10018 kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, kich1=\E[2~, 10019 knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, 10020 lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 10021 ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, rmcup=\E[ R, rmir=\E[4l, 10022 rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 10023 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 10024 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 10025 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10026 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 10027 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 10028 tbc=\E[3g, tsl=\E7\E[99;%i%p1%dH, vpa=\E[%i%p1%dd, 10029 use=vt220+keypad, 10030# 10031# Wyse 185 with 24 data lines and top status (terminal status) 10032wy185-24|wyse185-24|wyse 185 with 24 data lines, 10033 hs@, 10034 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 10035 use=wy185, 10036# 10037# Wyse 185 with visual bell. 10038wy185-vb|wyse185-vb|wyse 185+flash, 10039 bel@, use=wy185, 10040# 10041# Wyse 185 in 132-column mode. 10042wy185-w|wyse185-w|wyse 185 in 132-column mode, 10043 cols#132, wsl#132, 10044 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 10045 ip=$<7>, rs2=\E[35h\E[?3h, use=wy185, 10046# 10047# Wyse 185 in 132-column mode with visual bell. 10048wy185-wvb|wyse185-wvb|wyse 185+flash+132 cols, 10049 bel@, use=wy185-w, 10050 10051# wy325 terminfo entries 10052# Done by Joe H. Davis 3-9-92 10053 10054# lines 25 columns 80 10055# 10056wy325|wyse325|Wyse epc, 10057 am, bw, hs, mc5i, mir, 10058 cols#80, lh#1, lines#24, lw#8, nlab#8, pb#9601, wsl#45, 10059 acsc=+/\,.0[a2fxgqh1ihjYk?lZm@nEqDtCu4vAwBx3yszr{c~~, 10060 bel=^G, blink=\EG2, cbt=\EI, civis=\E`0, clear=\E+$<50>, 10061 cnorm=\E`1, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 10062 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW$<7>, 10063 dim=\EGp, dl1=\ER$<3>, dsl=\EF\r, ed=\EY$<50>, el=\ET$<4>, 10064 flash=\E`8$<100/>\E`9, fsl=^M, home=^^, ht=^I, hts=\E1, 10065 il1=\EE$<3>, ind=\n$<3>, ip=$<2>, is1=\EcB0\EcC1, 10066 is2=\EcD\E'\Er\EH\003\Ed/\EO\Ee1\Ed*\E`@\E`9\E`1\016\024\El, 10067 is3=\Ew0$<16>, kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=^H, 10068 kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, 10069 kel=\ET, kent=\E7, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 10070 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 10071 kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, 10072 kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, 10073 kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, ll=^^^K, 10074 mc0=\EP, mc4=^T, mc5=\Ed#, 10075 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 10076 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 10077 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<2>, 10078 rmacs=\EcD, rmam=\Ed., rmcup=\Ew0, rmir=\Er, rmln=\EA11, 10079 rs1=\E~!\E~4$<30>, rs2=\EeF\E`\:$<70>, 10080 rs3=\EwG\Ee($<100>, 10081 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EcE%e\EcD%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%p6%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 10082 sgr0=\E(\EH\003\EG0\EcD, smacs=\EcE, smam=\Ed/, 10083 smcup=\Ew1, smir=\Eq, smln=\EA10, smso=\EGt, tbc=\E0, 10084 tsl=\EF, use=adm+sgr, 10085 10086# 10087# lines 24 columns 80 vb 10088# 10089wy325-vb|wyse325-vb|wyse-325 with visual bell, 10090 bel@, use=wy325, 10091 10092# 10093# lines 24 columns 132 10094# 10095wy325-w|wyse325-w|wy325w-24|wyse-325 in wide mode, 10096 cols#132, lw#7, nlab#16, wsl#97, 10097 cup=\Ea%i%p1%dR%p2%dC, dch1=\EW$<12>, ip=$<4>, 10098 rs2=\E`;$<70>, use=wy325, 10099# 10100# lines 25 columns 80 10101# 10102wy325-25|wyse325-25|wy325-80|wyse-325|wyse-325 25 lines, 10103 lh@, lines#25, lw@, nlab@, 10104 pln@, rs3=\EwG\Ee)$<100>, use=wy325, 10105# 10106# lines 25 columns 132 10107# 10108wy325-25w|wyse325-25w|wy325 132 columns, 10109 lh@, lines#25, lw@, nlab@, 10110 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 10111# 10112# lines 25 columns 132 vb 10113# 10114wy325-w-vb|wy325-wvb|wyse325-wvb|wyse-325 wide mode reverse video, 10115 bel@, use=wy325-w, 10116 10117# 10118# lines 42 columns 80 10119# 10120wy325-42|wyse325-42|wyse-325 42 lines, 10121 lh@, lines#42, lw@, nlab@, 10122 pln@, rs3=\EwG\Ee)$<100>, use=wy325, 10123# 10124# lines 42 columns 132 10125# 10126wy325-42w|wyse325-42w|wyse-325 42 lines wide mode, 10127 lh@, lines#42, lw@, nlab@, 10128 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 10129# 10130# lines 42 columns 132 vb 10131# 10132wy325-42w-vb|wy325-42wvb|wyse-325 42 lines wide mode visual bell, 10133 bel@, use=wy325-w, 10134# 10135# lines 43 columns 80 10136# 10137wy325-43|wyse325-43|wyse-325 43 lines, 10138 lh@, lines#43, lw@, nlab@, 10139 pln@, use=wy325, 10140# 10141# lines 43 columns 132 10142# 10143wy325-43w|wyse325-43w|wyse-325 43 lines wide mode, 10144 lh@, lines#43, lw@, nlab@, 10145 pln@, rs3=\EwG\Ee)$<100>, use=wy325-w, 10146# 10147# lines 43 columns 132 vb 10148# 10149wy325-43w-vb|wy325-43wvb|wyse-325 43 lines wide mode visual bell, 10150 bel@, use=wy325-w, 10151 10152# Wyse 370 -- 24 line screen with status line. 10153# 10154# The terminal may have to be set for 8 data bits and 2 stop 10155# bits for the arrow keys to work. 10156# 10157# If you change keyboards the terminal will send different 10158# escape sequences. 10159# The following definition is for the basic terminal without 10160# function keys. 10161# 10162# <u0> -> enter Tektronix 4010/4014 mode 10163# <u1> -> exit Tektronix 4010/4014 mode 10164# <u2> -> enter ASCII mode (from any ANSI mode) 10165# <u3> -> exit ASCII mode (goto native ANSI mode) 10166# <u4> -> enter Tek 4207 ANSI mode (from any ANSI mode) 10167# <u5> -> exit Tek 4207 mode (goto native ANSI mode) 10168# 10169# Bug: The <op> capability resets attributes. 10170wy370-nk|wyse 370 without function keys, 10171 am, ccc, hs, mc5i, mir, msgr, xenl, xon, 10172 colors#64, cols#80, it#8, lines#24, ncv#48, pairs#64, wsl#80, 10173 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10174 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10175 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 10176 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10177 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10178 cup=\E[%i%p1%d;%p2%dH$<1>, cuu=\E[%p1%dA, cuu1=\E[A, 10179 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<1*>, dch1=\E[P$<1>, 10180 dclk=\E[31h, dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, 10181 dsl=\E[40l, ech=\E[%p1%dX$<.1*>, ed=\E[J$<40>, 10182 el=\E[K$<10>, el1=\E[1K$<12>, enacs=\E)0, 10183 flash=\E[30h\E\,\E[30l$<300>, fsl=\E[1;24r\E8, 10184 home=\E[H, hpa=\E[%i%p1%d`, ht=\011$<1>, hts=\EH, 10185 ich=\E[%p1%d@$<1*>, il=\E[%p1%dL$<2*>, il1=\E[L$<2>, 10186 ind=\n$<2>, 10187 initc=\E[66;%p1%d;%?%p2%{250}%<%t%{0}%e%p2%{500}%<%t%{16}%e%p2%{750}%<%t%{32}%e%{48}%;%?%p3%{250}%<%t%{0}%e%p3%{500}%<%t%{4}%e%p3%{750}%<%t%{8}%e%{12}%;%?%p4%{250}%<%t%{0}%e%p4%{500}%<%t%{1}%e%p4%{750}%<%t%{2}%e%{3}%;%{1}%+%+%+%dw, 10188 invis=\E[8m, ip=$<1>, is1=\E[90;1"p\E[?5W$<6>, 10189 is2=\E[2;4;20;30;40l\E[?1;10;16l\E[12h\E[?7;8;25h, 10190 is3=\E>\017\E)0\E(B\E[63;0w\E[m, mc0=\E[0i, mc4=\E[4i, 10191 mc5=\E[5i, 10192 oc=\E[60w\E[63;0w\E[66;1;4w\E[66;2;13w\E[66;3;16w\E[66;4;49w\E[66;5;51w\E[66;6;61w\E[66;7;64w, 10193 op=\E[m, rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, 10194 rmam=\E[?7l, rmclk=\E[31l, rmcup=\E[ R, rmir=\E[4l, 10195 rmkx=\E>, rmso=\E[27m, rmul=\E[24m, 10196 rs1=\E[13l\E[3l\E!p\E[?4i, rs2=\E[35h\E[?3l$<8>, 10197 rs3=\E[?5l, sc=\E7, setb=\E[62;%p1%dw, setf=\E[61;%p1%dw, 10198 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10199 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smcup=\E[ Q, 10200 smir=\E[4h, smkx=\E[?1l\E=, smso=\E[7m, smul=\E[4m, 10201 tbc=\E[3g, tsl=\E[40l\E[40h\E7\E[99;%i%p1%dH, 10202 u0=\E[?38h\E8, u1=\E[?38l\E)0, u2=\E[92;52"p, u3=\E~B, 10203 u4=\E[92;76"p, u5=\E%!1\E[90;1"p, vpa=\E[%i%p1%dd, 10204# 10205# Function key set for the ASCII (wy-50 compatible) keyboard 10206# This is the default 370. 10207# 10208wy370|wyse370|wy370-101k|Wyse 370 with 101 key keyboard, 10209 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10210 kcuu1=\E[A, kdch1=\EOQ, kdl1=\EOQ, kent=\EOM, kf1=\E[?4i, 10211 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 10212 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf2=\E[?3i, 10213 kf3=\E[2i, kf4=\E[@, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 10214 kf8=\E[19~, kf9=\E[20~, khome=\E[H, kich1=\EOP, kil1=\EOP, 10215 knp=\E[U, kpp=\E[V, use=wy370-nk, 10216# 10217# Function key set for the VT-320 (and wy85) compatible keyboard 10218# 10219wy370-105k|Wyse 370 with 105 key keyboard, 10220 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 10221 kdch1=\E[3~, kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, 10222 kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, 10223 kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, kf20=\E[34~, 10224 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 10225 khlp=\E[28~, khome=\E[26~, kich1=\E[2~, knp=\E[6~, 10226 kpp=\E[5~, kslt=\E[4~, lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, 10227 use=wy370-nk, use=vt220+keypad, 10228# 10229# Function key set for the PC compatible keyboard 10230# 10231wy370-EPC|Wyse 370 with 102 key keyboard, 10232 kbs=^H, kcbt=\E[Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10233 kcuu1=\E[A, kend=\E[1~, kent=\EOM, kf1=\EOP, kf10=\E[21~, 10234 kf11=\E[23~, kf12=\E[24~, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 10235 kf5=\E[M, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 10236 khome=\E[H, kich1=\E[2~, knp=\E[U, kpp=\E[V, use=wy370-nk, 10237# 10238# Wyse 370 with visual bell. 10239wy370-vb|Wyse 370 with visible bell, 10240 bel@, use=wy370, 10241# 10242# Wyse 370 in 132-column mode. 10243wy370-w|Wyse 370 in 132-column mode, 10244 cols#132, wsl#132, 10245 rs2=\E[35h\E[?3h$<70>, use=wy370, 10246# 10247# Wyse 370 in 132-column mode with visual bell. 10248wy370-wvb|Wyse 370 with visible bell 132-columns, 10249 flash=\E[30h\E\,\E[30l$<300>, use=wy370-w, 10250wy370-rv|Wyse 370 reverse video, 10251 rs3=\E[32h\E[?5h, use=wy370, 10252# 10253# Wyse 99gt Tektronix 4010/4014 emulator, 10254# 10255wy99gt-tek|Wyse 99gt Tektronix 4010/4014 emulator, 10256 am, os, 10257 cols#74, lines#35, 10258 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, 10259 cup=\035%{3040}%{89}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, 10260 cuu1=^K, ff=^L, 10261 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, 10262 home=^]7`x @\037, 10263 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, 10264 is2=\E8, nel=^M^J, u0=\E~>\E8, u1=\E[42h, 10265# 10266# Wyse 160 Tektronix 4010/4014 emulator, 10267# 10268wy160-tek|Wyse 160 Tektronix 4010/4014 emulator, 10269 cup=\035%{3103}%{91}%p1%*%-%Py%p2%{55}%*%Px%gy%{128}%/%{31}%&%{32}%+%c%gy%{3}%&%{4}%*%gx%{3}%&%+%{96}%+%c%gy%{004}%/%{31}%&%{96}%+%c%gx%{128}%/%{31}%&%{32}%+%c%gx%{004}%/%{31}%&%{64}%+%c\037, 10270 home=^]8`g @\037, use=wy99gt-tek, 10271# 10272# Wyse 370 Tektronix 4010/4014 emulator, 10273# 10274wy370-tek|Wyse 370 Tektronix 4010/4014 emulator, 10275 am, os, 10276 cols#80, lines#36, 10277 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, 10278 cup=\035%{775}%{108}%p1%*%{5}%/%-%Py%p2%{64}%*%{4}%+%{5}%/%Px%gy%{32}%/%{31}%&%{32}%+%c%gy%{31}%&%{96}%+%c%gx%{32}%/%{31}%&%{32}%+%c%gx%{31}%&%{64}%+%c\037, 10279 cuu1=^K, ff=^L, 10280 hd=\036HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH\037, 10281 home=^]8g @\037, 10282 hu=\036DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD\037, 10283 is2=\E8, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^I, kcuu1=^K, 10284 nel=^M^J, u0=\E[?38h\E8, u1=\E[?38l\E)0, 10285 10286# Vendor-supplied Wyse entries end here. 10287 10288# 10289#TITLE: TERMINFO ENTRY WY520 10290#DATE: 8/5/93 10291# The WY520 terminfo is based on the WY285 entry published on the WYSE 10292# BBS with the addition of more function keys and special keys. 10293# 10294# rs1 -> set personality 10295# rs2 -> set number of columns 10296# rs3 -> set number of lines 10297# is1 -> select the proper font 10298# is2 -> do the initialization 10299# is3 -> If this string is empty then rs3 gets sent. 10300# 10301# Wyse 520 emulating a vt420 7 bit mode with default ANSI keyboard 10302# - The BS key is programmed to generate BS in smcup since 10303# is2 doesn't seem to work. 10304# - Remove and shift/Remove: delete a character 10305# - Insert : enter insert mode 10306# - Find : delete to end of file 10307# - Select : clear a line 10308# - F11, F12, F13: send default sequences (not ESC, BS, LF) 10309# - F14 : Home key 10310# - Bottom status line (host writable line) is used. 10311# - smkx,rmkx are removed because this would put the numeric 10312# keypad in Dec application mode which doesn't seem to work 10313# with SCO applications. 10314# 10315wy520|wyse520|wyse 520, 10316 am, hs, km, mc5i, mir, xenl, xon, 10317 cols#80, it#8, lines#24, wsl#80, 10318 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10319 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10320 clear=\E[H\E[J$<40>, cnorm=\E[34h\E[?25h, cr=^M, 10321 csr=\E[%i%p1%d;%p2%dr$<20>, cub=\E[%p1%dD, cub1=^H, 10322 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10323 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10324 cvvis=\E[?25h\E[34l, dch=\E[%p1%dP$<3>, dch1=\E[P$<30>, 10325 dim=\E[2m, dl=\E[%p1%dM$<2*>, dl1=\E[M$<2>, dsl=\E[0$~, 10326 ech=\E[%p1%dX, ed=\E[J$<40>, el=\E[K, el1=\E[1K, 10327 enacs=\E)0, fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%d`, ht=^I, 10328 hts=\EH, ich=\E[%p1%d@$<2>, il=\E[%p1%dL$<3*>, 10329 il1=\E[L$<3>, ind=\n$<2>, invis=\E[8m, ip=$<4>, is1=\E[?5W, 10330 is2=\E[2;4;20;30l\E[?1;4;10;16l\E[12h\E[?7;8;25;67h, 10331 is3=\E>\E(B\E)0\017\E[m, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 10332 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, ked=\E[1~, 10333 kel=\E[4~, kent=\EOM, kf10=\E[21~, kf11=\E[23~, 10334 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 10335 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 10336 kf20=\E[34~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, 10337 kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, khome=\E[26~, 10338 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, kslt=\E[4~, lf1=PF1, 10339 lf2=PF2, lf3=PF3, lf4=PF4, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 10340 rc=\E8, rev=\E[7m, ri=\EM$<2>, rmacs=^O, rmam=\E[?7l, 10341 rmcup=\E[ R, rmir=\E[4l, rmso=\E[m, rmul=\E[24m, 10342 rs1=\E[13l\E[3l\E\\\E[63;1"p\E[!p, rs2=\E[35h\E[?3l, 10343 rs3=\E[?5l\E[47h\E[40l\E[r, sc=\E7, 10344 sgr=\E[0%?%p2%t;4%;%?%p3%p1%|%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10345 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, 10346 smcup=\E[ Q\E[?67;8h, smir=\E[4h, smso=\E[7m, smul=\E[4m, 10347 tbc=\E[3g, tsl=\E[2$~\E[1$}\E[%i%p1%d`, 10348 vpa=\E[%i%p1%dd, use=vt220+keypad, 10349# 10350# Wyse 520 with 24 data lines and status (terminal status) 10351wy520-24|wyse520-24|wyse 520 with 24 data lines, 10352 hs@, 10353 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 10354 use=wy520, 10355# 10356# Wyse 520 with visual bell. 10357wy520-vb|wyse520-vb|wyse 520 with visible bell, 10358 flash=\E[30h\E\,\E[30l$<100>, use=wy520, 10359# 10360# Wyse 520 in 132-column mode. 10361wy520-w|wyse520-w|wyse 520 in 132-column mode, 10362 cols#132, wsl#132, 10363 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 10364 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520, 10365# 10366# Wyse 520 in 132-column mode with visual bell. 10367wy520-wvb|wyse520-wvb|wyse 520 with visible bell 132-columns, 10368 flash=\E[30h\E\,\E[30l$<100>, use=wy520-w, 10369# 10370# 10371# Wyse 520 emulating a vt420 7 bit mode. 10372# The DEL key is programmed to generate BS in is2. 10373# With EPC keyboard. 10374# - 'End' key will clear till end of line on EPC keyboard 10375# - Shift/End : ignored. 10376# - Insert : enter insert mode. 10377# - Delete : delete a character (have to change interrupt character 10378# to CTRL-C: stty intr '^c') for it to work since the 10379# Delete key sends 7FH. 10380wy520-epc|wyse520-epc|wyse 520 with EPC keyboard, 10381 kdch1=\177, kel=\E[4~, kend=\E[4~, kf0=\E[21~, kf1=\E[11~, 10382 kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, kf5=\E[15~, khome=\E[H, 10383 use=wy520, 10384# 10385# Wyse 520 with 24 data lines and status (terminal status) 10386# with EPC keyboard. 10387wy520-epc-24|wyse520-pc-24|wyse 520 with 24 data lines and EPC keyboard, 10388 hs@, 10389 dsl@, fsl@, rs3=\E[?5l\E[47h\E[40l\E[1;24r, tsl@, 10390 use=wy520-epc, 10391# 10392# Wyse 520 with visual bell. 10393wy520-epc-vb|wyse520-pc-vb|wyse 520 with visible bell and EPC keyboard, 10394 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc, 10395# 10396# Wyse 520 in 132-column mode. 10397wy520-epc-w|wyse520-epc-w|wyse 520 in 132-column mode with EPC keyboard, 10398 cols#132, wsl#132, 10399 dch=\E[%p1%dP$<7>, dch1=\E[P$<7>, ich=\E[%p1%d@$<7>, 10400 ip=$<7>, rs2=\E[35h\E[?3h, use=wy520-epc, 10401# 10402# Wyse 520 in 132-column mode with visual bell. 10403wy520-epc-wvb|wyse520-p-wvb|wyse 520 with visible bell 132-columns and EPC keyboard, 10404 flash=\E[30h\E\,\E[30l$<100>, use=wy520-epc-w, 10405# 10406# Wyse 520 in 80-column, 36 lines 10407wy520-36|wyse520-36|wyse 520 with 36 data lines, 10408 hs@, 10409 lines#36, 10410 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, 10411 use=wy520, 10412# 10413# Wyse 520 in 80-column, 48 lines 10414wy520-48|wyse520-48|wyse 520 with 48 data lines, 10415 hs@, 10416 lines#48, 10417 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, 10418 use=wy520, 10419# 10420# Wyse 520 in 132-column, 36 lines 10421wy520-36w|wyse520-36w|wyse 520 with 132 columns and 36 data lines, 10422 cols#132, wsl#132, 10423 rs2=\E[?3h, 10424 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, 10425 use=wy520-36, 10426# 10427# Wyse 520 in 132-column, 48 lines 10428wy520-48w|wyse520-48w|wyse 520 with 48 data lines, 10429 cols#132, wsl#132, 10430 rs2=\E[?3h, 10431 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, 10432 use=wy520-48, 10433# 10434# 10435# Wyse 520 in 80-column, 36 lines with EPC keyboard 10436wy520-36pc|wyse520-36pc|wyse 520 with 36 data lines and EPC keyboard, 10437 hs@, 10438 lines#36, 10439 dsl@, fsl@, rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r, tsl@, 10440 use=wy520-epc, 10441# 10442# Wyse 520 in 80-column, 48 lines with EPC keyboard 10443wy520-48pc|wyse520-48pc|wyse 520 with 48 data lines and EPC keyboard, 10444 hs@, 10445 lines#48, 10446 dsl@, fsl@, rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r, tsl@, 10447 use=wy520-epc, 10448# 10449# Wyse 520 in 132-column, 36 lines with EPC keyboard 10450wy520-36wpc|wyse520-36wpc|wyse 520 with 36 data lines and EPC keyboard, 10451 cols#132, wsl#132, 10452 rs2=\E[?3h, 10453 rs3=\E[?5l\E[36*|\E[36t\E[40l\E[1;36r\E[132$|, 10454 use=wy520-36pc, 10455# 10456# Wyse 520 in 132-column, 48 lines with EPC keyboard 10457wy520-48wpc|wyse520-48wpc|wyse 520 with 48 data lines and EPC keyboard, 10458 cols#132, wsl#132, 10459 rs2=\E[?3h, 10460 rs3=\E[?5l\E[48*|\E[48t\E[40l\E[1;48r\E[132$|, 10461 use=wy520-48pc, 10462 10463# From: John Gilmore <hoptoad!gnu@lll-crg.arpa> 10464# (wyse-vp: removed <if=/usr/share/tabset/wyse-adds>, there's no such 10465# file and we don't know what <hts> is -- esr) 10466wyse-vp|Wyse 50 in ADDS Viewpoint emulation mode with "enhance" on, 10467 OTbs, am, 10468 cols#80, it#8, lines#24, 10469 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 10470 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EW, 10471 dl1=\El, ed=\Ek, el=\EK, home=^A, ht=^I, il1=\EM, ind=^J, 10472 is2=\E`\:\E`9\017\Er, kbs=^H, kcub1=^U, kcud1=^J, kcuf1=^F, 10473 kcuu1=^Z, khome=^A, ll=^A^Z, nel=^M^J, rmir=\Er, rmso=^O, 10474 rmul=^O, rs1=\E`\:\E`9\017\Er, sgr0=^O, smir=\Eq, smso=^N, 10475 smul=^N, 10476 10477wy75ap|wyse75ap|wy-75ap|wyse-75ap|Wyse WY-75 Applications and Cursor keypad, 10478 is2=\E[1;24r\E[?10;3l\E[?1;25h\E[4l\E[m\E(B\E=, 10479 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 10480 khome=\EOH, rmkx=\E[?1l\E>$<10/>, smkx=\E[?1h\E=$<10/>, 10481 use=wy75, 10482 10483# From: Eric Freudenthal <freudent@eric.ultra.nyu.edu> 10484wy100q|Wyse 100 for Quotron, 10485 OTbs, 10486 cols#80, lines#24, xmc#1, 10487 cbt=\EI, clear=^Z, cub1=^H, cud1=^J, cuf1=^L, 10488 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 10489 dl1=\ER, ed=\EY, el=\ET, home=^^, il1=\EE, invis@, 10490 is2=\E`\:\0\EC\EDF\E0\E'\E(\EA21, kcub1=^H, kcud1=^J, 10491 kcuf1=^L, kcuu1=^K, ri=\Ej, rmir=\Er, smir=\Eq, use=adm+sgr, 10492 10493#### Kermit terminal emulations 10494# 10495# Obsolete Kermit versions may be listed in the section describing obsolete 10496# non-ANSI terminal emulators later in the file. 10497# 10498 10499# KERMIT standard all versions. 10500# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. 10501# (kermit: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) 10502# From: greg small <gts@populi.berkeley.edu> 9-25-84 10503kermit|standard kermit, 10504 OTbs, 10505 cols#80, lines#24, 10506 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 10507 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 10508 el=\EK, home=\EH, is2=K0 Standard Kermit 9-25-84\n, 10509 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 10510kermit-am|standard kermit plus auto-margin, 10511 am, 10512 is2=K1 Standard Kermit plus Automatic Margins\n, 10513 use=kermit, 10514# IBMPC Kermit 1.2. 10515# Bugs: <ed>, <el>: do not work except at beginning of line! <clear> does 10516# not work, but fake with :cl=\EH\EJ (since :cd=\EJ: works at beginning of 10517# line). 10518# From: greg small <gts@populi.berkeley.edu> 8-30-84 10519pckermit|pckermit12|UCB IBMPC Kermit 1.2, 10520 am, 10521 lines#25, 10522 clear=\EH\EJ, ed@, el@, 10523 is2=K2 UCB IBMPC Kermit 1.2 8-30-84\n, use=kermit, 10524# IBMPC Kermit 1.20 10525# Cannot use line 25, now acts funny like ansi special scrolling region. 10526# Initialization must escape from that region by cursor position to line 24. 10527# Cannot use character insert because 1.20 goes crazy if insert at col 80. 10528# Does not use :am: because autowrap is lost when kermit dropped and restarted. 10529# From: greg small <gts@populi.berkeley.edu> 12-19-84 10530pckermit120|UCB IBMPC Kermit 1.20, 10531 it#8, lines#24, 10532 cud1=\EB, cvvis=\EO\Eq\EEK3, dch1=\EN, dl1=\EM, ht=^I, 10533 il1=\EL, 10534 is2=\EO\Eq\EJ\EY7 K3 UCB IBMPC Kermit 1.20 12-19-84\n, 10535 rmir@, rmso=\Eq, smir@, smso=\Ep, use=kermit, 10536# MS-DOS Kermit 2.27 for the IBMPC 10537# Straight ascii keyboard. :sr=\EI: not avail. many versions + bug prone in vi. 10538# Cannot use line 25, now acts funny like ansi special scrolling region. 10539# Initialization must escape from that region by cursor position to line 24. 10540# Does not use am: because autowrap is lost when kermit dropped and restarted. 10541# Reverse video for standout like H19. 10542# (msk227: removed obsolete ":ma=^Hh^Jj^Kk^Ll^^H:" -- esr) 10543# From: greg small <gts@populi.berkeley.edu> 3-17-85 10544msk227|mskermit227|MS-DOS Kermit 2.27 for the IBMPC, 10545 OTbs, am@, 10546 cols#80, it#8, lines#24, 10547 clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 10548 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 10549 cvvis=\EO\Eq\EG\EwK4, dch1=\EN, dl1=\EM, ed=\EJ, el=\EK, 10550 home=\EH, ht=^I, il1=\EL, 10551 is2=\EO\Eq\EG\Ew\EJ\EY7 K4 MS Kermit 2.27 for the IBMPC 3-17-85\n, 10552 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rc=\Ek, 10553 rmir=\EO, rmso=\Eq, sc=\Ej, smir=\E@, smso=\Ep, 10554# MS-DOS Kermit 2.27 with automatic margins 10555# From: greg small <gts@populi.berkeley.edu> 3-17-85 10556msk227am|mskermit227am|UCB MS-DOS Kermit 2.27 with automatic margins, 10557 am, 10558 cvvis=\EO\Eq\EG\EvK5, 10559 is2=\EO\Eq\EG\Ev\EJ\EY7 K5 MS Kermit 2.27 +automatic margins 3-17-85\n, 10560 use=msk227, 10561# MS-DOS Kermit 2.27 UCB 227.14 for the IBM PC 10562# Automatic margins now default. Use ansi <sgr> for highlights. 10563# Define function keys. 10564# (msk22714: removed obsolete ":kn#10:" -- esr) 10565# From: greg small <gts@populi.berkeley.edu> 3-17-85 10566msk22714|mskermit22714|UCB MS-DOS Kermit 2.27 UCB 227.14 IBM PC, 10567 am, 10568 bold=\E[1m, cvvis=\EO\Eq\EG\EvK6, 10569 is2=\EO\Eq\EG\Ev\EJ\EY7 K6 MS Kermit 2.27 UCB 227.14 IBM PC 3-17-85\n, 10570 kf0=\E0, kf1=\E1, kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, 10571 kf7=\E7, kf8=\E8, kf9=\E9, rev=\E[7m, rmso=\E[m, rmul=\E[m, 10572 sgr0=\E[m, smso=\E[1m, smul=\E[4m, use=mskermit227, 10573# This was designed for a VT320 emulator, but it is probably a good start 10574# at support for the VT320 itself. 10575# Please send changes with explanations to bug-gnu-emacs@prep.ai.mit.edu. 10576# (vt320-k3: I added <rmam>/<smam> based on the init string -- esr) 10577vt320-k3|MS-Kermit 3.00's vt320 emulation, 10578 am, eslok, hs, km, mir, msgr, xenl, 10579 cols#80, it#8, lines#49, pb#9600, vt#3, 10580 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10581 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 10582 clear=\E[H\E[J, cmdch=\E, cnorm=\E[?25h, cr=^M, 10583 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10584 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10585 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10586 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 10587 dsl=\E[0$~, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 10588 flash=\E[?5h\E[?5l\E[?5h\E[?5l\E[?5h\E[?5l, 10589 fsl=\E[0$}, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 10590 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 10591 is2=\E>\E F\E[?1h\E[?7h\E[r\E[2$~, kbs=^H, kcub1=\EOD, 10592 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdl1=\E[3~, kf0=\E[21~, 10593 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 10594 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kich1=\E[2~, knp=\E[6~, 10595 kpp=\E[5~, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, nel=^M^J, rc=\E8, 10596 rev=\E[7m, ri=\EM, rin=\E[%p1%dL, rmacs=\E(B, rmam=\E[?7l, 10597 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 10598 rs1=\E(B\E)B\E>\E F\E[4;20l\E[12h\E[?1;5;6;38;42l\E[?7;25h\E[4i\E[?4i\E[m\E[r\E[2$~, 10599 sc=\E7, sgr0=\E[m, smacs=\E(0, smam=\E[?7h, smir=\E[4h, 10600 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 10601 tsl=\E[1$}\r\E[K, vpa=\E[%i%p1%dd, 10602# From: Joseph Gil <yogi@cs.ubc.ca> 13 Dec 1991 10603# ACS capabilities from Philippe De Muyter <phdm@info.ucl.ac.be> 30 May 1996 10604# (I removed a bogus boolean :mo: and added <msgr>, <smam>, <rmam> -- esr) 10605vt320-k311|dec vt320 series as defined by kermit 3.11, 10606 am, eslok, hs, mir, msgr, xenl, xon, 10607 cols#80, it#8, lines#24, vt#3, 10608 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10609 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 10610 clear=\E[;H\E[2J, cnorm=\E[?25h, cr=^M, 10611 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10612 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10613 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10614 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 10615 dsl=\E[2$~\r\E[1$}\E[K\E[$}, ed=\E[J, el=\E[K, 10616 flash=\E[?5h\E[?5l, fsl=\E[$}, home=\E[H, ht=^I, hts=\EH, 10617 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L$<3/>, ind=\ED, 10618 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r\E[24;1H, 10619 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 10620 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf6=\E[17~, 10621 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, lf1=pf1, lf2=pf2, 10622 lf3=pf3, lf4=pf4, nel=^M\ED, rc=\E8, rev=\E[7m, 10623 rf=/usr/share/tabset/vt100, ri=\EM, rmacs=^O, 10624 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 10625 rmul=\E[24m, rs1=\E[?3l, sc=\E7, sgr0=\E[m, smacs=^N, 10626 smam=\E[?7h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, 10627 smul=\E[4m, tbc=\E[3g, tsl=\E[2$~\E[1$}\E[1;%dH, 10628 10629######## NON-ANSI TERMINAL EMULATIONS 10630# 10631 10632#### Avatar 10633# 10634# These entries attempt to describe Avatar, a terminal emulation used with 10635# MS-DOS bulletin-board systems. It was designed to give ANSI-like 10636# capabilities, but with cheaper (shorter) control sequences. Messy design, 10637# excessively dependent on PC idiosyncracies, but apparently rather popular 10638# in the BBS world. 10639# 10640# No color support. Avatar doesn't fit either of the Tektronix or HP color 10641# models that terminfo knows about. An Avatar color attribute is the 10642# low 7 bits of the IBM-PC display-memory attribute. Bletch. 10643# 10644# I wrote these entries while looking at the Avatar spec. I don't have 10645# the facilities to test them. Let me know if they work, or don't. 10646# 10647# Avatar escapes not used by these entries (because maybe you're smarter 10648# and more motivated than I am and can figure out how to wrap terminfo 10649# around some of them, and because they are weird enough to be funny): 10650# level 0: 10651# ^L -- clear window/reset current attribute to default 10652# ^V^A%p1%c -- set current color attribute, parameter decodes as follows: 10653# 10654# bit: 6 5 4 3 2 1 0 10655# | | | | | 10656# +---+---+ | +---+---+ 10657# | | | 10658# | | foreground color 10659# | foreground intensity 10660# background color 10661# level 0+: 10662# ^V^J%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) up by p1 lines 10663# ^V^K%p1%c%p2%c%p3%c%p4%c%p5%c -- scroll (p2,p3) to (p4,p5) down by p1 lines 10664# ^V^L%p1%c%p2%c%p3%c -- clear p2 lines and p3 cols w/attr %p1 10665# ^V^M%p1%c%p2%c%p3%c%p4%c -- fill p3 lines & p4 cols w/char p2+attr %p1 10666# (^V^L and ^V^M set the current attribute as a side-effect.) 10667# ^V ^Y <a> [...] <c> -- repeat pattern. <a> specifies the number of bytes 10668# in the pattern, <c> the number of times the pattern 10669# should be repeated. If either value is 0, no-op. 10670# The pattern can contain Avatar console codes, 10671# including other ^V ^Y patterns. 10672# level 1: 10673# ^V^O -- clockwise mode on; turn print direction right each time you 10674# hit a window edge (yes, really). Turned off by CR 10675# ^V^P -- no-op 10676# ^V^Q%c -- query the driver 10677# ^V^R -- driver reset 10678# ^V^S -- Sound tone (PC-specific) 10679# ^V^T -- change highlight at current cursor poition to %c 10680# ^V^U%p1%c%p2%c -- highlight window <a> with attribute <b> 10681# ^V^V%p1%c%p2%c%p3%c%p4%c%p5%c 10682# -- define window 10683# 10684# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 10685# (The <blink>/<bold>/<rev>/<smacs>/<smul>/<smso> capabilities exist only to 10686# tell ncurses that the corresponding highlights exist; it should use <sgr>, 10687# which is the only method that will actually work for multiple highlights.) 10688# 10689# Update by TD - 2004: half of this was inconsistent. Found documentation 10690# and repaired most of the damage. sgr0 is probably incorrect, but the 10691# available documentation gives no clues for a workable string. 10692avatar0|avatar terminal emulator level 0, 10693 am, bce, msgr, 10694 cols#80, it#8, lines#25, 10695 blink=^V^B, bold=^V^A^P, cr=^M, cub1=^V^E, cud1=^V^D, 10696 cuf1=^V^F, cup=\026\010%p1%c%p2%c, cuu1=^V^C, el=^V^G, 10697 ind=^J, invis=^V^A\0, rep=\031%p1%c%p2%c, rev=^V^Ap, 10698 rmacs@, rs2=^L, 10699 sgr=%?%p1%p2%|%p3%|%p6%|%p7%|%t\026\001%?%p7%t%{128}%e%{0}%?%p1%t%{112}%|%;%?%p2%t%{1}%|%;%?%p3%t%{112}%|%;%?%p6%t%{16}%|%;%;%c%;%?%p4%t\026\002%;, 10700 sgr0=^V^A^G, smacs@, smso=^V^Ap, smul=^V^A^A, 10701 use=klone+acs, 10702# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 10703avatar0+|avatar terminal emulator level 0+, 10704 dch1=^V^N, rmir=\026\n\0\0\0\0, smir=^V^I, use=avatar0, 10705# From: Eric S. Raymond <esr@snark.thyrsus.com> 1 Nov 1995 10706avatar|avatar1|avatar terminal emulator level 1, 10707 civis=^V'^B, cnorm=^V'^A, cvvis=^V^C, dl1=^V-, il1=^V+, 10708 rmam=^V", rmir=^V^P, smam=^V$, use=avatar0+, 10709 10710#### RBcomm 10711# 10712# RBComm is a lean and mean terminal emulator written by the Interrupt List 10713# maintainer, Ralf Brown. It was fairly popular in the late DOS years (early 10714# '90s), especially in the BBS world, and still has some loyal users due to 10715# its very small memory footprint and to a cute macro language. 10716rbcomm|IBM PC with RBcomm and EMACS keybindings, 10717 am, bw, mir, msgr, xenl, 10718 cols#80, it#8, lines#25, 10719 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 10720 clear=^L, cnorm=\E[?25h, cr=^M, csr=\E[%i%p1%d;%p2%dr, 10721 cub1=^H, cud1=^C, cuf1=^B, 10722 cup=\037%p2%{32}%+%c%p1%{32}%+%c, cuu1=^^, dch1=^W, 10723 dl=\E[%p1%dM, dl1=^Z, ech=\E[%p1%dX, ed=^F5, el=^P^P, ht=^I, 10724 il=\E[%p1%dL, il1=^K, ind=\ED, invis=\E[8m, 10725 is2=\017\035\E(B\E)0\E[?7h\E[?3l\E[>8g, kbs=^H, 10726 kcub1=^B, kcud1=^N, kcuf1=^F, kcuu1=^P, khome=^A, nel=^M\ED, 10727 rc=\E8, rep=\030%p1%c%p2%c, rev=^R, ri=\EM, rmcup=, rmdc=, 10728 rmir=^], rmkx=\E>, rmso=^U, rmul=^U, 10729 rs1=\017\E(B\E)0\025\E[?3l\E[>8g, sc=\E7, sgr0=\E[m, 10730 smcup=, smdc=, smir=^\, smkx=\E=, smso=^R, smul=^T, 10731rbcomm-nam|IBM PC with RBcomm without autowrap, 10732 am@, 10733 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, 10734 is2=\017\035\E(B\E)0\E[?7l\E[?3l\E[>8g, kbs=^H, 10735 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, 10736rbcomm-w|IBM PC with RBcomm in 132 column mode, 10737 cols#132, 10738 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, 10739 is2=\017\035\E(B\E)0\E[?7h\E[?3h\E[>8g, kbs=^H, 10740 kcub1=^H, kcud1=^J, nel=^M^J, use=rbcomm, 10741 10742######## LCD DISPLAYS 10743# 10744 10745#### Matrix Orbital 10746# from: Eric Z. Ayers (eric@ale.org) 10747# 10748# Matrix Orbital 20x4 LCD display 10749# Command Character is 0xFE (decimal 254, octal 376) 10750# 10751# On this device, cursor addressability isn't possible. The LCD expects: 10752# 0xfe G <col> <row> 10753# for cup: %p1 == row and %p2 is column 10754# 10755# This line: 10756# cup=\376G%p2%c%p1%c 10757# LOOKS like it will work, but sometimes only one of the two numbers is sent. 10758# See the terminfo (5) manpage commented regarding 'Terminals which use "%c"'. 10759# 10760# Alas, there is no cursor upline capability on this display. 10761# 10762# These entries add some 'sanity stuff' to the clear function. That is, it 10763# does a 'clear' and also turns OFF auto scroll, turns ON Auto Line Wrapping, 10764# and turns off the cursor blinking and stuff like that. 10765# 10766# NOTE: calling 'beep' turns on the backlight (bell) 10767# NOTE: calling 'flash' turns it on and back off (visual bell) 10768# 10769MtxOrb|Generic Matrix Orbital LCD display, 10770 bel=\376B^A, clear=\376X\376C\376R\376K\376T, 10771 cnorm=\376K\376T, cub1=\376L, cuf1=\376M, 10772 flash=\376B\001$<200>\376F, home=\376H, 10773MtxOrb204|20x4 Matrix Orbital LCD display, 10774 cols#20, lines#4, use=MtxOrb, 10775MtxOrb162|16x2 Matrix Orbital LCD display, 10776 cols#16, lines#2, use=MtxOrb, 10777# The end 10778 10779######## OLDER TERMINAL TYPES 10780# 10781# This section is devoted to older commercial terminal brands that are now 10782# discontinued, but known to be still in use or represented by emulations. 10783# 10784 10785#### AT&T (att, tty) 10786# 10787# This section also includes Teletype-branded VDTs. 10788# 10789# The AT&T/Teletype terminals group was sold to SunRiver Data Systems (now 10790# Boundless Technologies); for details, see the header comment on the ADDS 10791# section. 10792# 10793# These are AT&T's official terminfo entries. All-caps aliases have been 10794# removed. 10795# 10796att2300|sv80|AT&T 2300 Video Information Terminal 80 column mode, 10797 am, eo, mir, msgr, xon, 10798 cols#80, it#8, lines#24, 10799 bel=^G, clear=\E[H\E[J, cr=^M, cub=\E[%p1%dD, cub1=^H, 10800 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 10801 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 10802 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 10803 el=\E[K, el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, 10804 il=\E[%p1%dL, il1=\E[L, ind=^J, kbs=^H, kcbt=\E[Z, kclr=\E[J, 10805 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 10806 kdl1=\E[M, kf1=\E[1r, kf10=\E[10r, kf11=\E[11r, 10807 kf12=\E[12r, kf13=\E[13r, kf14=\E[14r, kf15=\E[15r, 10808 kf16=\E[16r, kf2=\E[2r, kf3=\E[3r, kf4=\E[4r, kf5=\E[5r, 10809 kf6=\E[6r, kf7=\E[7r, kf8=\E[8r, kf9=\E[9r, khome=\E[H, 10810 kich1=\E[@, kil1=\E[L, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 10811 rev=\E[7m, rmir=\E[4l, rmso=\E[m, sgr0=\E[m, smir=\E[4h, 10812 smso=\E[7m, 10813att2350|AT&T 2350 Video Information Terminal 80 column mode, 10814 mc0@, mc4@, mc5@, use=att2300, 10815 10816# Must setup RETURN KEY - CR, REC'VD LF - INDEX. 10817# Seems upward compatible with vt100, plus ins/del line/char. 10818# On sgr, the protection parameter is ignored. 10819# No check is made to make sure that only 3 parameters are output. 10820# standout= reverse + half-intensity = 3 | 5. 10821# bold= reverse + underline = 2 | 3. 10822# note that half-bright blinking doesn't look different from normal blinking. 10823# NOTE:you must program the function keys first, label second! 10824# (att4410: a BSD entry has been seen with the following capabilities: 10825# <is2=\E[?6l>, <kf1=\EOc>, <kf2=\EOd>, <kf3=\EOe>, <kf4=\EOg>, 10826# <kf6=\EOh>, <kf7=\EOi>, <kf8=\EOj>, -- esr) 10827att5410v1|att4410v1|tty5410v1|AT&T 4410/5410 80 columns - version 1, 10828 am, hs, mir, msgr, xon, 10829 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 10830 acsc=++\,\,--..00``aaffgghhjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10831 bel=^G, blink=\E[5m, bold=\E[2;7m, clear=\E[H\E[J, cr=^M, 10832 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 10833 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dim=\E[2m, 10834 dl1=\E[M, ed=\E[J, el=\E[K, fsl=\E8, home=\E[H, ht=^I, 10835 ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, is1=\E[?3l\E)0, 10836 is3=\E[1;03q f1 \EOP\E[2;03q f2 \EOQ\E[3;03q f3 \EOR\E[4;03q f4 \EOS\E[5;03q f5 \EOT\E[6;03q f6 \EOU\E[7;03q f7 \EOV\E[8;03q f8 \EOW, 10837 kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 10838 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, 10839 kf6=\EOU, kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, 10840 ll=\E[24H, nel=^M^J, 10841 pfx=\E[%p1%1d;%p2%l%2.2dq f%p1%1d %p2%s, 10842 pln=\E[%p1%d;00q%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 10843 rmacs=^O, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, 10844 sc=\E7, 10845 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 10846 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, 10847 tsl=\E7\E[25;%p1%{1}%+%dH, 10848 10849att4410v1-w|att5410v1-w|tty5410v1-w|AT&T 4410/5410 132 columns - version 1, 10850 cols#132, wsl#132, 10851 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att5410v1, 10852 10853att4410|att5410|tty5410|AT&T 4410/5410 80 columns - version 2, 10854 OTbs, 10855 pfx=\E[%p1%d;%p2%l%02dq f%p1%d %p2%s, 10856 use=att5410v1, 10857 10858att5410-w|att4410-w|4410-w|tty5410-w|5410-w|AT&T 4410/5410 in 132 column mode, 10859 cols#132, wsl#132, 10860 is1=\E[?3h\E)0, rs2=\Ec\E[?3h\E[2;0y, use=att4410, 10861 10862# 5410 in terms of a vt100 10863# (v5410: added <rmam>/<smam> based on init string -- esr) 10864v5410|att5410 in terms of a vt100, 10865 am, mir, msgr, xon, 10866 cols#80, it#8, lines#24, vt#3, 10867 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10868 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 10869 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 10870 cub1=^H, cud1=^J, cuf1=\E[C$<2>, 10871 cup=\E[%i%p1%d;%p2%dH$<5>, cuu1=\E[A$<2>, dch1=\E[P, 10872 dl1=\E[M, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 10873 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ich1=\E[@, 10874 il1=\E[L, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 10875 kcuu1=\EOA, rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, 10876 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m$<2>, 10877 rmul=\E[m$<2>, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 10878 sc=\E7, 10879 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 10880 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 10881 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 10882 use=vt100+fnkeys, 10883 10884# 10885# Teletype Model 5420 -- A souped up 5410, with multiple windows, 10886# even! the 5420 has three modes: scroll, window or page mode 10887# this terminfo should work in scroll or window mode, but doesn't 10888# take advantage of any of the differences between them. 10889# 10890# Has memory below (2 lines!) 10891# 3 pages of memory (plus some spare) 10892# The 5410 sequences for <cup>, <cvvis>, <dch>, <dl>, <ech>, <flash>, <home>, 10893# <hpa>, <hts> would work for these, but these work in both scroll and window 10894# mode... Unset insert character so insert mode works 10895# <is1> sets 80 column mode, 10896# <is2> escape sequence: 10897# 1) turn off all fonts 10898# 2) function keys off, keyboard lock off, control display off, 10899# insert mode off, erasure mode off, 10900# 3) full duplex, monitor mode off, send graphics off, nl on lf off 10901# 4) reset origin mode 10902# 5) set line wraparound 10903# 6) exit erasure mode, positional attribute mode, and erasure extent mode 10904# 7) clear margins 10905# 8) program ENTER to transmit ^J, 10906# We use \212 to program the ^J because a bare ^J will get translated by 10907# UNIX into a CR/LF. The enter key is needed for AT&T uOMS. 10908# 1 2 3 4 5 6 7 8 10909# <is3> set screen color to black, 10910# No representation in terminfo for the delete word key: kdw1=\Ed 10911# Key capabilities assume the power-up send sequence... 10912# This <rmcup> is not strictly necessary, but it helps maximize 10913# memory usefulness: <rmcup=\Ez>, 10914# Alternate sgr0: <sgr0=\E[m\EW^O>, 10915# Alternate sgr: <sgr=\E[%?%p1%t2;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t^N%e^O%;>, 10916# smkx programs the SYS PF keys to send a set sequence. 10917# It also sets up labels f1, f2, ..., f8, and sends edit keys. 10918# This string causes them to send the strings <kf1>-<kf8> 10919# when pressed in SYS PF mode. 10920# (att4415: I added <rmam>/<smam> based on the init string -- esr) 10921att4415|tty5420|att5420|AT&T 4415/5420 80 cols, 10922 OTbs, db, mir, xon, 10923 lh#2, lm#78, lw#8, nlab#8, wsl#55, 10924 cbt=\E[Z, clear=\E[x\E[J, cnorm=\E[11;0j, cub=\E[%p1%dD, 10925 cud=\E[%p1%dB, cuf=\E[%p1%dC, cup=\E[%i%p1%d;%p2%dx, 10926 cuu=\E[%p1%dA, cvvis=\E[11;1j, dch=\E[%p1%dP, 10927 dl=\E[%p1%dM, ech=\E[%p1%ds\E[%p1%dD, 10928 flash=\E[?5h$<200>\E[?5l, home=\E[x, 10929 hpa=\E[%p1%{1}%+%dG, hts=\EH, ich=\E[%p1%d@, ich1@, 10930 il=\E[%p1%dL, indn=\E[%p1%dE, is1=\E[?3l$<100>, 10931 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[21;1j\212, 10932 is3=\E[?5l, kbeg=\Et, kcbt=\E[Z, kdch1=\E[P, kdl1=\E[M, 10933 kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, kf2=\EOd, 10934 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 10935 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, 10936 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 10937 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?2i, mc4=\E[?9i, 10938 mc5=\E[?4i, mrcup=\E[%i%p1%d;%p2%dt, 10939 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s, 10940 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, 10941 rin=\E[%p1%dF, rmam=\E[?7l, rmir=\E[4l, 10942 rmkx=\E[19;0j\E[21;1j\212, rmln=\E|, 10943 sgr=\E[0%?%p1%p5%|%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;, 10944 sgr0=\E[m\017, smam=\E[?7h, smir=\E[4h, 10945 smkx=\E[19;1j\E[21;4j\Eent, smln=\E~, tbc=\E[3g, 10946 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, 10947 use=att4410, 10948 10949att4415-w|tty5420-w|att5420-w|AT&T 4415/5420 132 cols, 10950 cols#132, lm#54, wsl#97, 10951 is1=\E[?3h$<100>, use=att4415, 10952 10953att4415-rv|tty5420-rv|att5420-rv|AT&T 4415/5420 80 cols/rv, 10954 flash=\E[?5l$<200>\E[?5h, is3=\E[?5h, use=att4415, 10955 10956att4415-w-rv|tty5420-w-rv|att5420-w-rv|AT&T 4415/5420 132 cols/rv, 10957 cols#132, lm#54, wsl#97, 10958 flash=\E[?5l$<200>\E[?5h, is1=\E[?3h$<100>, is3=\E[?5h, 10959 use=att4415, 10960 10961# Note that this mode permits programming USER PF KEYS and labels 10962# However, when you program user pf labels you have to reselect 10963# user pf keys to make them appear! 10964att4415+nl|tty5420+nl|att5420+nl|generic AT&T 4415/5420 changes for not changing labels, 10965 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, 10966 pfx=\E[%p1%d;%p2%l%02d;0;1q F%p1%d %p2%s, 10967 pln=\E[%p1%d;0;0;1q%p2%:-16.16s, 10968 10969att4415-nl|tty5420-nl|att5420-nl|AT&T 4415/5420 without changing labels, 10970 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10971 use=att4415, 10972 10973att4415-rv-nl|tty5420-rv-nl|att5420-rv-nl|AT&T 4415/5420 reverse video without changing labels, 10974 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10975 use=att4415-rv, 10976 10977att4415-w-nl|tty5420-w-nl|att5420-w-nl|AT&T 4415/5420 132 cols without changing labels, 10978 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10979 use=att4415-w, 10980 10981att4415-w-rv-n|tty5420-w-rv-n|att5420-w-rv-n|AT&T 4415/5420 132 cols reverse without changing labels, 10982 kf1@, kf2@, kf3@, kf4@, kf5@, kf6@, kf7@, kf8@, use=att4415+nl, 10983 use=att4415-w-rv, 10984 10985att5420_2|AT&T 5420 model 2 80 cols, 10986 am, db, hs, mir, msgr, xon, 10987 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, 10988 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 10989 blink=\E[5m, cbt=\E[1Z, clear=\EH\EJ, cnorm=\E[11;0j, 10990 cr=\EG, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 10991 cud=\E[%p1%dB, cud1=\E[1B, cuf=\E[%p1%dC, cuf1=\E[1C, 10992 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[1A, 10993 cvvis=\E[11;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 10994 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[0J, 10995 el=\E[0K, el1=\E[1K, flash=\E[?5h$<200>\E[?5l, fsl=\E8, 10996 home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, 10997 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 10998 indn=\E[%p1%dE, invis=\E[8m, 10999 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;0j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, 11000 kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, 11001 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 11002 kel=\E[2K, kend=\Ez, kent=^J, kf1=\EOc, kf2=\EOd, kf3=\EOe, 11003 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, khome=\E[H, 11004 kich1=\E[4h, kil1=\E[L, kind=\E[T, kll=\Eu, knp=\E[U, 11005 kpp=\E[V, kri=\E[S, lf1=F1, lf2=F2, lf3=F3, lf4=F4, lf5=F5, 11006 lf6=F6, lf7=F7, lf8=F8, ll=\Ew, mc0=\E[?;2i, mc4=\E[4i, 11007 mc5=\E[5i, mrcup=\E[%i%p1%d;%p2%dt, nel=^M^J, 11008 pfx=\E[%p1%d;%p2%l%02dq F%p1%d %p2%s\E~, 11009 pln=\E[%p1%d;0;0;0q%p2%:-16.16s\E~, prot=\EV, rc=\E8, 11010 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmkx=\E[19;0j, 11011 rmln=\E|, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, 11012 sc=\E7, 11013 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11014 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1j, smln=\E~, 11015 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 11016 tsl=\E7\E[25;%p1%{8}%+%dH, vpa=\E[%p1%{1}%+%dd, 11017att5420_2-w|AT&T 5420 model 2 in 132 column mode, 11018 cols#132, 11019 is1=\E[0;23r\Ex\Ey\E[2;0j\E[3;3j\E[4;0j\E[5;1j\E[6;0j\E[7;0j\E[8;0j\E[9;1j\E[10;0j\E[15;0j\E[16;1j\E[19;0j\E[20;1j\E[29;0j\E[1;24r, 11020 use=att5420_2, 11021 11022att4418|att5418|AT&T 5418 80 cols, 11023 am, xon, 11024 cols#80, lines#24, 11025 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11026 bel=^G, blink=\E[5m, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, 11027 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 11028 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 11029 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, 11030 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, 11031 ich=\E[%p1%d@, ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=^J, 11032 is1=\E[?3l, is2=\E)0\E?6l\E?5l, kclr=\E[%%, kcub1=\E@, 11033 kcud1=\EU, kcuf1=\EA, kcuu1=\ES, kent=\E[, kf1=\E[h, 11034 kf10=\E[m, kf11=\E[n, kf12=\E[o, kf13=\E[H, kf14=\E[I, 11035 kf15=\E[J, kf18=\E[K, kf19=\E[L, kf2=\E[i, kf20=\E[E, 11036 kf21=\E[_, kf22=\E[M, kf23=\E[N, kf24=\E[O, kf3=\E[j, 11037 kf6=\E[k, kf7=\E[l, kf8=\E[f, kf9=\E[w, khome=\Ec, rc=\E8, 11038 rev=\E[7m, rmacs=^O, rmso=\E[m, rmul=\E[m, sc=\E7, 11039 sgr0=\E[m\017, smacs=^N, smso=\E[7m, smul=\E[4m, 11040att4418-w|att5418-w|AT&T 5418 132 cols, 11041 cols#132, 11042 is1=\E[?3h, use=att5418, 11043 11044att4420|tty4420|teletype 4420, 11045 OTbs, da, db, eo, msgr, ul, xon, 11046 cols#80, lines#24, lm#72, 11047 bel=^G, clear=\EH\EJ, cr=\EG, cub1=\ED, cud1=\EB, cuf1=\EC, 11048 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 11049 dl1=\EM, ed=\EJ, el=\Ez, home=\EH, il1=\EL, ind=\EH\EM\EY7\s, 11050 kcbt=\EO, kclr=\EJ, kcub1=^H, kcud1=\EB, kcuf1=\EC, 11051 kcuu1=\EA, kdch1=\EP, kdl1=\EM, kf0=\EU, kf3=\E@, khome=\EH, 11052 kich1=\E\^, kil1=\EL, kind=\ES, kri=\ET, 11053 lf0=segment advance, lf3=cursor tab, rmdc@, rmso=\E~, 11054 rmul=\EZ, smdc@, smso=\E}, smul=\E\\, 11055 11056# The following is a terminfo entry for the Teletype 4424 11057# asynchronous keyboard-display terminal. It supports 11058# the vi editor. The terminal must be set up as follows, 11059# 11060# HIGHLIGHT DEFINITION 3-TONE 11061# DISPLAY FUNCTION GROUP III 11062# 11063# The second entry below provides limited (a la adm3a) 11064# operation under GROUP II. 11065# 11066# This must be used with DISPLAY FUNCTION GROUP I or III 11067# and HIGHLIGHT DEFINITION 3-TONE 11068# The terminal has either bold or blink, depending on options 11069# 11070# (att4424: commented out <smcup>=\E[1m, we don't need bright locked on -- esr) 11071att4424|tty4424|teletype 4424, 11072 OTbs, am, xon, 11073 cols#80, lines#24, 11074 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11075 bel=^G, blink=\E3, bold=\E3, cbt=\EO, clear=\E[H\E[2J, cr=^M, 11076 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11077 cud=\E[%p1%dB, cud1=\EB, cuf=\E[%p1%dC, cuf1=\EC, 11078 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EA, 11079 dch=\E[%p1%dP, dch1=\EP, dim=\EW, dl=\E[%p1%dM, dl1=\EM, 11080 ed=\EJ, el=\Ez, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 11081 ich1=\E\^, il=\E[%p1%dL, il1=\EL, ind=^J, is2=\E[20l\E[?7h, 11082 kbs=^H, kclr=\EJ, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 11083 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 11084 khome=\E[H, nel=\EE, rev=\E}, ri=\ET, rmacs=\E(B, rmso=\E~, 11085 rmul=\EZ, 11086 sgr=\E[%?%p1%t7%;%?%p2%t;4%;%?%p3%t;7%;%?%p6%t;1%;%?%p6%p4%|%t;5%;%?%p5%t;0%;m, 11087 sgr0=\EX\E~\EZ\E4\E(B, smacs=\E(0, smso=\E}, smul=\E\\, 11088 tbc=\EF, 11089 11090att4424-1|tty4424-1|teletype 4424 in display function group I, 11091 kclr@, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome@, 11092 use=att4424, 11093 11094# This entry is not one of AT&T's official ones, it was translated from the 11095# 4.4BSD termcap file. The highlight strings are different from att4424. 11096# I have no idea why this is -- older firmware version, maybe? 11097# The following two lines are the comment originally attached to the entry: 11098# This entry appears to avoid the top line - I have no idea why. 11099# From: jwb Wed Mar 31 13:25:09 1982 remote from ihuxp 11100att4424m|tty4424m|teletype 4424M, 11101 am, da, db, mir, 11102 cols#80, it#8, lines#23, 11103 bel=^G, clear=\E[2;H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 11104 cup=\E[%i%p1%2d;%p2%2dH\E[B, cuu1=\E[A, dch1=\EP, 11105 dl1=\EM, el=\E[K, ht=^I, ich1=\E\^, il1=\EL, ind=^J, ip=$<2/>, 11106 is2=\E[m\E[2;24r, kbs=^H, kcub1=\E[D, kcud1=\E[B, 11107 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 11108 kf4=\EOS, khome=\E[H, nel=^M^J, ri=\ET, rmso=\E[m, rmul=\E[m, 11109 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 11110 11111# The Teletype 5425 is really version 2 of the Teletype 5420. It 11112# is quite similar, except for some minor differences. No page 11113# mode, for example, so all of the <cup> sequences used above have 11114# to change back to what's being used for the 5410. Many of the 11115# option settings have changed their numbering as well. 11116# 11117# This has been tested on a preliminary model. 11118# 11119# (att5425: added <rmam>/<smam> based on the init string -- esr) 11120att5425|tty5425|att4425|AT&T 4425/5425, 11121 am, da, db, hs, mir, msgr, xenl, xon, 11122 cols#80, it#8, lh#2, lines#24, lm#78, lw#8, nlab#8, wsl#55, 11123 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11124 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 11125 clear=\E[H\E[J, cnorm=\E[12;0j, cr=^M, 11126 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11127 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 11128 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11129 cvvis=\E[12;1j, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 11130 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%ds\E[%p1%dD, ed=\E[J, 11131 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 11132 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, 11133 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 11134 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dE, 11135 invis=\E[8m, is1=\E<\E[?3l$<100>, 11136 is2=\E[m\017\E[1;2;3;4;6l\E[12;13;14;20l\E[?6;97;99l\E[?7h\E[4i\Ex\E[25;1j\212, 11137 is3=\E[?5l, kbeg=\Et, kbs=^H, kcbt=\E[Z, kclr=\E[J, 11138 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 11139 kdl1=\E[M, kel=\E[2K, kend=\Ez, kent=\Eent, kf1=\EOc, 11140 kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, 11141 kf8=\EOj, khome=\E[H, kich1=\E[4h, kil1=\E[L, kind=\E[T, 11142 kri=\E[S, ll=\E[24H, mc0=\E[?2i, mc4=\E[?9i, mc5=\E[?4i, 11143 nel=^M^J, 11144 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 11145 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, prot=\EV, rc=\E8, 11146 rev=\E[7m, ri=\EM, rin=\E[%p1%dF, rmacs=^O, rmam=\E[?7l, 11147 rmir=\E[4l, rmkx=\E[21;0j\E[25;1j\212, rmln=\E|, 11148 rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l\E[2;0y, sc=\E7, 11149 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p8%t\EV%;%?%p9%t\016%e\017%;, 11150 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 11151 smkx=\E[21;1j\E[25;4j\Eent\E~, smln=\E~, smso=\E[7m, 11152 smul=\E[4m, tbc=\E[3g, tsl=\E7\E[25;%p1%{8}%+%dH, 11153 vpa=\E[%p1%{1}%+%dd, 11154 11155att5425-nl|tty5425-nl|att4425-nl|AT&T 4425/5425 80 columns no labels, 11156 smkx=\E[21;1j\E[25;4j\Eent, use=att4425, 11157 11158att5425-w|att4425-w|tty5425-w|teletype 4425/5425 in 132 column mode, 11159 cols#132, lm#54, wsl#97, 11160 is1=\E[?3h$<100>, use=tty5425, 11161 11162# (att4426: his had bogus capabilities: :ri=\EM:, :ri=\E[1U:. 11163# I also added <rmam>/<smam> -- esr) 11164att4426|tty4426|teletype 4426S, 11165 am, da, db, xon, 11166 cols#80, lines#24, lm#48, 11167 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11168 bel=^G, bold=\E[5m, clear=\E[H\E[2J\E[1U\E[H\E[2J\E[1V, 11169 cr=^M, cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 11170 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 11171 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EP, 11172 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[0K, home=\E[H, 11173 hpa=\E[%p1%dG, ht=^I, hts=\E1, ich=\E[%p1%d@, ich1=\E\^, 11174 il=\E[%p1%dL, il1=\EL, ind=^J, indn=\E[%p1%dS, 11175 is1=\Ec\E[?7h, is2=\E[m\E[1;24r, kbs=^H, kcbt=\EO, 11176 kclr=\E[2J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 11177 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 11178 kf7=\EOV, kf8=\EOW, khome=\E[H, kll=\E[24;1H, ll=\E[24H, 11179 nel=^M^J, rc=\E8, rev=\E[7m, ri=\ET, rin=\E[%p1%dT, 11180 rmacs=\E(B, rmam=\E[?7l, rmso=\E[m, rmul=\E[m, 11181 rs2=\Ec\E[?3l\E[2;0y, sc=\E7, sgr0=\E[m\E(B, smacs=\E(0, 11182 smam=\E[?7h, smso=\E[5m, smul=\E[4m, tbc=\E[3g, 11183 vpa=\E[%p1%dd, 11184 11185# Terminfo entry for the AT&T 510 A Personal Terminal 11186# Function keys 9 - 16 are available only after the 11187# screen labeled (soft keys/action blocks) are labeled. Function key 11188# 9 corresponds to the leftmost touch target on the screen, 11189# function key 16 corresponds to the rightmost. 11190# 11191# This entry is based on one done by Ernie Rice at Summit, NJ and 11192# changed by Anne Gallup, Skokie, IL, ttrdc!anne 11193att510a|bct510a|AT&T 510A Personal Terminal, 11194 am, mir, msgr, xenl, xon, 11195 cols#80, lh#2, lines#24, lw#7, nlab#8, 11196 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 11197 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 11198 civis=\E[11;0|, clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, 11199 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 11200 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 11201 cuu=\E[%p1%dA, cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, 11202 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, 11203 el=\E[0K, el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, ht=^I, 11204 hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, is1=\E(B\E)1\E[2l, 11205 is3=\E[21;1|\212, kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, 11206 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, 11207 kf10=\EOd, kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, 11208 kf15=\EOi, kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, 11209 kf6=\ENf, kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, 11210 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, nel=\EE, 11211 pln=\E[%p1%dp%p2%:-16s, rc=\E8, rev=\E[7m, ri=\EM, 11212 rmacs=^O, rmkx=\E[19;0|, rmso=\E[m, rmul=\E[m, sc=\E7, 11213 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;m%?%p9%t\016%e\017%;, 11214 sgr0=\E[m\017, smacs=^N, smkx=\E[19;1|, smso=\E[7m, 11215 smul=\E[4m, tbc=\E[3g, 11216 11217# Terminfo entry for the AT&T 510 D Personal Terminal 11218# Function keys 9 through 16 are accessed by bringing up the 11219# system blocks. 11220# Function key 9 corresponds to the leftmost touch target on the screen, 11221# function key 16 corresponds to the rightmost. 11222# 11223# There are problems with soft key labeling. These are due to 11224# strangenesses in the native terminal that are impossible to 11225# describe in a terminfo. 11226att510d|bct510d|AT&T 510D Personal Terminal, 11227 am, da, db, mir, msgr, xenl, xon, 11228 cols#80, lh#2, lines#24, lm#48, lw#7, nlab#8, 11229 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 11230 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 11231 clear=\E[H\E[J, cnorm=\E[11;3|, cr=^M, cub=\E[%p1%dD, 11232 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 11233 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 11234 cuu1=\E[A, cvvis=\E[11;2|, dch=\E[%p1%dP, dch1=\E[P, 11235 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[0K, 11236 el1=\E[1K, enacs=\E(B\E)1, ff=^L, home=\E[H, 11237 hpa=\E[%p1%{1}%+%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 11238 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 11239 invis=\E[8m, is1=\E(B\E)1\E[5;0|, is3=\E[21;1|\212, 11240 kLFT=\E[u, kRIT=\E[v, kbs=^H, kcbt=\E[Z, kcub1=\E[D, 11241 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOm, kf10=\EOd, 11242 kf11=\EOe, kf12=\EOf, kf13=\EOg, kf14=\EOh, kf15=\EOi, 11243 kf16=\EOj, kf2=\EOV, kf3=\EOu, kf4=\ENj, kf5=\ENe, kf6=\ENf, 11244 kf7=\ENh, kf8=\E[H, kf9=\EOc, kind=\E[S, kri=\E[T, ll=\E#2, 11245 mc0=\E[0i, mc4=\E[?8i, mc5=\E[?4i, mgc=\E\:, nel=\EE, 11246 pln=\E[%p1%dp%p2%:-16s, rc=\E8, 11247 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, 11248 rin=\E[%p1%dT, rmacs=^O, rmir=\E[4l, rmkx=\E[19;0|, 11249 rmln=\E<, rmso=\E[m, rmul=\E[m, rmxon=\E[29;1|, 11250 rs2=\E[5;0|, sc=\E7, 11251 sgr=\E[0%?%p5%p6%|%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11252 sgr0=\E[m\017, smacs=^N, smgl=\E4, smgr=\E5, smir=\E[4h, 11253 smkx=\E[19;1|, smln=\E?, smso=\E[7m, smul=\E[4m, 11254 smxon=\E[29;0|, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 11255 11256# (att500: I merged this with the att513 entry, att500 just used att513 -- esr) 11257att500|att513|AT&T 513 using page mode, 11258 am, chts, mir, msgr, xenl, xon, 11259 cols#80, lh#2, lines#24, lw#8, nlab#8, 11260 acsc=+g\,h-f.e`bhrisjjkkllmmnnqqttuuvvwwxx{{||}}~~, 11261 bel=^G, blink=\E[5m, bold=\E[2;7m, cbt=\E[Z, 11262 clear=\E[H\E[J, cnorm=\E[11;0|, cr=^M, 11263 csr=%i\E[%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11264 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 11265 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11266 cvvis=\E[11;1|, dch=\E[%p1%dP, dch1=\E[P$<1>, dim=\E[2m, 11267 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 11268 enacs=\E(B\E)1, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, 11269 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=^J, 11270 indn=\E[%p1%dE, invis=\E[8m, 11271 is1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l, 11272 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 11273 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 11274 kFND=\EOX, kHLP=\EOM, kHOM=\ENM, kIC=\ENJ, kLFT=\ENK, 11275 kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, kOPT=\EOR, kPRT=\EOZ, 11276 kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, kRIT=\ENL, kRPL=\EOY, 11277 kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, kbs=^H, kcan=\EOw, 11278 kcbt=\E[Z, kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, 11279 kcrt=\EOn, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 11280 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=\Eent, 11281 kext=\EOk, kf1=\EOc, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, 11282 kf6=\EOh, kf7=\EOi, kf8=\EOj, kfnd=\EOx, khlp=\EOm, 11283 khome=\E[H, kich1=\ENj, kind=\E[S, kmov=\ENc, kmrk=\ENi, 11284 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, 11285 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, 11286 kres=\EOq, krfr=\ENa, kri=\E[T, krpl=\EOy, krst=\EOB, 11287 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, ll=\E#2, 11288 mc0=\E[?98l\E[0i, mc4=\E[?98l\E[?8i, mc5=\E[?98l\E[?4i, 11289 nel=\EE, 11290 pfkey=\E[%p1%d;%p2%l%d;3;0p F%p1%d %p2%s, 11291 pfloc=\E[%p1%d;%p2%l%d;2;0p F%p1%d %p2%s, 11292 pfx=\E[%p1%d;%p2%l%d;1;0p F%p1%d %p2%s, 11293 pln=\E[%p1%dp%p2%:-16s, rc=\E8, 11294 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, 11295 rin=\E[%p1%dF, rmacs=^O, rmir=\E[4l, 11296 rmkx=\E[19;0|\E[21;1|\212, rmln=\E<, rmso=\E[m, 11297 rmul=\E[m, 11298 rs1=\E?\E[3;3|\E[10;0|\E[21;1|\212\E[6;1|\E[1{\E[?99l\E[2;0|\E[6;1|\E[8;0|\E[19;0|\E[1{\E[?99l, 11299 rs2=\E[5;0|, sc=\E7, 11300 sgr=\E[0%?%p1%p5%|%t;2%;%?%p2%p6%|%t;4%;%?%p4%t;5%;%?%p3%p1%|%p6%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11301 sgr0=\E[m\017, smacs=^N, smir=\E[4h, 11302 smkx=\E[19;1|\E[21;4|\Eent, smln=\E?, smso=\E[7m, 11303 smul=\E[4m, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 11304 11305# 01-07-88 11306# printer must be set to EMUL ANSI to accept ESC codes 11307# <cuu1> stops at top margin 11308# <is1> sets cpi 10,lpi 6,form 66,left 1,right 132,top 1,bottom 66,font 11309# and alt font ascii,wrap on,tabs cleared 11310# <is2> disables newline on LF,Emphasized off 11311# The <u0> capability sets form length 11312att5310|att5320|AT&T Model 53210 or 5320 matrix printer, 11313 xhpa, xvpa, 11314 bufsz#8192, cols#132, cps#120, it#8, lines#66, orc#10, 11315 orhi#100, orl#12, orvi#72, 11316 cpi=%?%p1%{10}%=%t\E[w%e%p1%{12}%=%t\E[2w%e%p1%{5}%=%t\E[5w%e%p1%{13}%=%p1%{14}%=%O%t\E[3w%e%p1%{16}%=%p1%{17}%=%O%t\E[4w%e%p1%{6}%=%t\E[6w%e%p1%{7}%=%t\E[7w%e%p1%{8}%=%t\E[8w%;, 11317 cr=^M, 11318 csnm=%?%p1%{0}%=%tusascii%e%p1%{1}%=%tenglish%e%p1%{2}%=%tfinnish%e%p1%{3}%=%tjapanese%e%p1%{4}%=%tnorwegian%e%p1%{5}%=%tswedish%e%p1%{6}%=%tgermanic%e%p1%{7}%=%tfrench%e%p1%{8}%=%tcanadian_french%e%p1%{9}%=%titalian%e%p1%{10}%=%tspanish%e%p1%{11}%=%tline%e%p1%{12}%=%tsecurity%e%p1%{13}%=%tebcdic%e%p1%{14}%=%tapl%e%p1%{15}%=%tmosaic%;, 11319 cud=\E[%p1%de, cud1=^J, cuf=\E[%p1%da, cuf1=\s, cuu1=\EM, 11320 ff=^L, hpa=\E[%p1%d`, ht=^I, is1=\Ec, is2=\E[20l\r, 11321 lpi=%?%p1%{2}%=%t\E[4z%e%p1%{3}%=%t\E[5z%e%p1%{4}%=%t\E[6z%e%p1%{6}%=%t\E[z%e%p1%{8}%=%t\E[2z%e%p1%{12}%=%t\E[3z%;, 11322 rshm=\E[m, 11323 scs=%?%p1%{0}%=%t\E(B%e%p1%{1}%=%t\E(A%e%p1%{2}%=%t\E(C%e%p1%{3}%=%t\E(D%e%p1%{4}%=%t\E(E%e%p1%{5}%=%t\E(H%e%p1%{6}%=%t\E(K%e%p1%{7}%=%t\E(R%e%p1%{8}%=%t\E(Q%e%p1%{9}%=%t\E(Y%e%p1%{10}%=%t\E(Z%e%p1%{11}%=%t\E(0%e%p1%{12}%=%t\E(1%e%p1%{13}%=%t\E(3%e%p1%{14}%=%t\E(8%e%p1%{15}%=%t\E(}%;, 11324 smgbp=\E[;%p1%dr, smglp=\E[%{1}%p1%+%ds, 11325 smgrp=\E[;%{1}%p1%+%ds, smgtp=\E[%p1%dr, sshm=\E[5m, 11326 u0=\E[%p1%dt, vpa=\E[%p1%dd, 11327 11328# Teletype 5620, firmware version 1.1 (8;7;3) or earlier from BRL 11329# The following SET-UP modes are assumed for normal operation: 11330# CR_DEF=CR NL_DEF=INDEX DUPLEX=FULL 11331# Other SET-UP modes may be set for operator convenience or communication 11332# requirements. This termcap description is for the Resident Terminal Mode. 11333# No delays specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 11334# The BRL entry also said: UNSAFE :ll=\E[70H: 11335att5620-1|tty5620-1|dmd1|Teletype 5620 with old ROMs, 11336 am, xon, 11337 cols#88, it#8, lines#70, vt#3, 11338 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 11339 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 11340 dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 11341 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 11342 il1=\E[L, ind=^J, indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, 11343 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 11344 kll=\E[70;1H, nel=^M^J, rc=\E8, ri=\E[T, rin=\E[%p1%dT, 11345 rs1=\Ec, sc=\E7, 11346 11347# 5620 terminfo (2.0 or later ROMS with char attributes) 11348# The following SET-UP modes are assumed for normal operation: 11349# DUPLEX=FULL GEN_FLOW=ON NEWLINE=INDEX RETURN=CR 11350# Other SET-UP modes may be set for operator convenience or communication 11351# requirements. This termcap description is for Resident Terminal Mode. No 11352# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 11353# assumptions: <ind> (scroll forward one line) is only done at screen bottom 11354# Be aware that older versions of the dmd have a firmware bug that affects 11355# parameter defaulting; for this terminal, the 0 in \E[0m is not optional. 11356# <msgr> is from an otherwise inferior BRL for this terminal. That entry 11357# also has <ll>=\E[70H commented out and marked unsafe. 11358# For more, see the 5620 FAQ maintained by David Breneman <daveb@dgtl.com>. 11359att5620|dmd|tty5620|ttydmd|5620|5620 terminal 88 columns, 11360 OTbs, am, msgr, npc, xon, 11361 cols#88, it#8, lines#70, 11362 bel=^G, bold=\E[2m, clear=\E[H\E[J, cr=^M, cub1=^H, 11363 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 11364 dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, 11365 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich=\E[%p1%d@, 11366 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 11367 indn=\E[%p1%dS, kbs=^H, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 11368 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, kll=\E[70;1H, nel=^J, 11369 pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, rev=\E[7m, ri=\E[T, 11370 rin=\E[%p1%dT, rmso=\E[0m, rmul=\E[0m, rs1=\Ec, sc=\E7, 11371 sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 11372att5620-24|tty5620-24|dmd-24|teletype dmd 5620 in a 24x80 layer, 11373 lines#24, use=att5620, 11374att5620-34|tty5620-34|dmd-34|teletype dmd 5620 in a 34x80 layer, 11375 lines#34, use=att5620, 11376# 5620 layer running the "S" system's downloaded graphics handler: 11377att5620-s|tty5620-s|layer|vitty|5620 S layer, 11378 OTbs, OTpt, am, 11379 cols#80, it#8, lines#72, 11380 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, 11381 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=^K, dl1=\ED, 11382 el=\EK, flash=\E^G, ht=^I, il1=\EI, ind=^J, kbs=^H, kclr=\E[2J, 11383 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 11384 kll=\E[70;1H, 11385 11386# Entries for <kf15> thru <kf28> refer to the shifted system pf keys. 11387# 11388# Entries for <kf29> thru <kf46> refer to the alternate keypad mode 11389# keys: = * / + 7 8 9 - 4 5 6 , 1 2 3 0 . ENTER 11390att605|AT&T 605 80 column 102key keyboard, 11391 am, eo, xon, 11392 cols#80, lines#24, lw#8, nlab#8, wsl#80, 11393 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11394 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 11395 cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 11396 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch=\E[%p1%dP, 11397 dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 11398 el=\E[K, el1=\E[1K, fsl=\E8, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 11399 il1=\E[L, ind=^J, invis=\E[8m, 11400 is1=\E[8;0|\E[?\E[13;20l\E[?\E[12h, is2=\E[m\017, 11401 kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, kclr=\E[2J, 11402 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 11403 kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, kf11=\ENq, 11404 kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, 11405 kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, 11406 kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, 11407 kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, 11408 kf30=\EOQ, kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, 11409 kf35=\EOy, kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, 11410 kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, 11411 kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, 11412 kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, kich1=\E[@, 11413 kil1=\E[L, kind=\E[S, knp=\E[U, kpp=\E[V, ll=\E[24H, 11414 mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 11415 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 11416 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 11417 rmacs=^O, rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, 11418 rs2=\Ec\E[?3l, sc=\E7, sgr0=\E[m\017, smacs=\E)0\016, 11419 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, 11420 tsl=\E7\E[25;%i%p1%dx, 11421att605-pc|ATT 605 in pc term mode, 11422 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 11423 cbt=\E[Z, cub1=\E[D, cud1=\E[B, cuf1=\E[C, cuu1=\E[A, 11424 dch1=\E[P, dl1=\E[M, ich1=\E[@, il1=\E[L, kcbt=\E[Z, 11425 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, 11426 kdl1=\E[M, kend=\E[F, kf1=\E[M, kf10=\E[V, kf2=\E[N, 11427 kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, kf8=\E[T, 11428 kf9=\E[U, khome=\E[H, kich1=\E[@, knp=\E[G, kpp=\E[I, 11429 rmsc=400\E[50;0|, smsc=250\E[?11l\E[50;1|, xoffc=g, 11430 xonc=e, use=att605, 11431att605-w|AT&T 605-w 132 column 102 key keyboard, 11432 cols#132, wsl#132, 11433 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h\E(B\E)0, 11434 use=att605, 11435# (att610: I added <rmam>/<smam> based on the init string. I also 11436# added <indn> and <rin> because the BSD file says the att615s have them, 11437# and the 615 is like a 610 with a big keyboard, and most of their other 11438# smart terminals support the same sequence -- esr) 11439att610|AT&T 610; 80 column; 98key keyboard, 11440 am, eslok, hs, mir, msgr, xenl, xon, 11441 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 11442 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11443 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 11444 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 11445 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11446 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11447 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11448 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 11449 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 11450 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, 11451 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 11452 indn=\E[%p1%dS, invis=\E[8m, 11453 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0, 11454 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, 11455 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 11456 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 11457 kf13=\ENs, kf14=\ENt, kf2=\EOd, kf3=\EOe, kf4=\EOf, kf5=\EOg, 11458 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 11459 kind=\E[S, kri=\E[T, ll=\E[24H, mc4=\E[?4i, mc5=\E[?5i, 11460 nel=\EE, 11461 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 11462 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 11463 ri=\EM, rin=\E[%p1%dT, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, 11464 rmln=\E[2p, rmso=\E[m, rmul=\E[m, rs2=\Ec\E[?3l, sc=\E7, 11465 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11466 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 11467 smln=\E[p, smso=\E[7m, smul=\E[4m, tsl=\E7\E[25;%i%p1%dx, 11468att610-w|AT&T 610; 132 column; 98key keyboard, 11469 cols#132, wsl#132, 11470 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 11471 use=att610, 11472 11473att610-103k|AT&T 610; 80 column; 103key keyboard, 11474 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 11475 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 11476 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, 11477 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, 11478 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, 11479 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 11480 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, 11481 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf9@, kfnd=\EOx, 11482 khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, kmsg=\EOl, 11483 knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, kpp=\E[V, 11484 kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, kres=\EOq, 11485 krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, ksav=\EOo, 11486 kslt=\ENI, kspd=\EOp, kund=\EOs, use=att610, 11487att610-103k-w|AT&T 610; 132 column; 103key keyboard, 11488 cols#132, wsl#132, 11489 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 11490 use=att610-103k, 11491att615|AT&T 615; 80 column; 98key keyboard, 11492 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, 11493 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, 11494 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, 11495 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, 11496 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, 11497 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, 11498 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610, 11499att615-w|AT&T 615; 132 column; 98key keyboard, 11500 kLFT=\E[ A, kRIT=\E[ @, kf15=\EOC, kf16=\EOD, kf17=\EOE, 11501 kf18=\EOF, kf19=\EOG, kf20=\EOH, kf21=\EOI, kf22=\EOJ, 11502 kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, kf27=\ENS, 11503 kf28=\ENT, kf29=\EOP, kf30=\EOQ, kf31=\EOR, kf32=\EOS, 11504 kf33=\EOw, kf34=\EOx, kf35=\EOy, kf36=\EOm, kf37=\EOt, 11505 kf38=\EOu, kf39=\EOv, kf40=\EOl, kf41=\EOq, kf42=\EOr, 11506 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, use=att610-w, 11507att615-103k|AT&T 615; 80 column; 103key keyboard, 11508 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k, 11509att615-103k-w|AT&T 615; 132 column; 103key keyboard, 11510 kLFT=\E[ A, kRIT=\E[ @, use=att610-103k-w, 11511# (att620: I added <rmam>/<smam> based on the init string and 11512# <rin>/<indn> from a BSD termcap -- esr) 11513att620|AT&T 620; 80 column; 98key keyboard, 11514 am, eslok, hs, mir, msgr, xenl, xon, 11515 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 11516 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11517 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 11518 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 11519 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11520 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11521 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11522 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 11523 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 11524 flash=\E[?5h$<200>\E[?5l, fsl=\E8, home=\E[H, ht=^I, 11525 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 11526 indn=\E[%p1%dS, invis=\E[8m, 11527 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h, 11528 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, 11529 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 11530 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 11531 kf13=\ENs, kf14=\ENt, kf15=\EOC, kf16=\EOD, kf17=\EOE, 11532 kf18=\EOF, kf19=\EOG, kf2=\EOd, kf20=\EOH, kf21=\EOI, 11533 kf22=\EOJ, kf23=\ENO, kf24=\ENP, kf25=\ENQ, kf26=\ENR, 11534 kf27=\ENS, kf28=\ENT, kf29=\EOP, kf3=\EOe, kf30=\EOQ, 11535 kf31=\EOR, kf32=\EOS, kf33=\EOw, kf34=\EOx, kf35=\EOy, 11536 kf36=\EOm, kf37=\EOt, kf38=\EOu, kf39=\EOv, kf4=\EOf, 11537 kf40=\EOl, kf41=\EOq, kf42=\EOr, kf43=\EOs, kf44=\EOp, 11538 kf45=\EOn, kf46=\EOM, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 11539 kf9=\ENo, khome=\E[H, kind=\E[S, kri=\E[T, ll=\E[24H, 11540 mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 11541 pfx=\E[%p1%d;%p2%l%02dq F%p1%1d %p2%s, 11542 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, rev=\E[7m, 11543 ri=\EM, rin=\E[%p1%dT, rmacs=\E(B\017, rmam=\E[?7l, 11544 rmir=\E[4l, rmln=\E[2p, rmso=\E[m, rmul=\E[m, 11545 rs2=\Ec\E[?3l, sc=\E7, 11546 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\E)0\016%e\E(B\017%;, 11547 sgr0=\E[m\E(B\017, smacs=\E)0\016, smam=\E[?7h, 11548 smir=\E[4h, smln=\E[p, smso=\E[7m, smul=\E[4m, 11549 tsl=\E7\E[25;%i%p1%dx, 11550att620-w|AT&T 620; 132 column; 98key keyboard, 11551 cols#132, wsl#132, 11552 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 11553 use=att620, 11554att620-103k|AT&T 620; 80 column; 103key keyboard, 11555 kBEG=\ENB, kCAN=\EOW, kCMD=\EOU, kCPY=\END, kCRT=\EON, 11556 kDC=\ENF, kDL=\ENE, kEND=\ENN, kEOL=\EOA, kEXT=\EOK, 11557 kFND=\EOX, kHLP=\EOM, kMOV=\ENC, kMSG=\EOL, kNXT=\ENH, 11558 kOPT=\EOR, kPRT=\EOZ, kPRV=\ENG, kRDO=\EOT, kRES=\EOQ, 11559 kRPL=\EOY, kSAV=\EOO, kSPD=\EOP, kUND=\EOS, kbeg=\E9, 11560 kcan=\EOw, kclo=\EOV, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 11561 kdch1=\ENf, kdl1=\ENe, kel=\EOa, kend=\E0, kent=^M, 11562 kext=\EOk, kf10@, kf11@, kf12@, kf13@, kf14@, kf15@, kf16@, kf17@, 11563 kf18@, kf19@, kf20@, kf21@, kf22@, kf23@, kf24@, kf25@, kf26@, kf27@, 11564 kf28@, kf29@, kf30@, kf31@, kf32@, kf33@, kf34@, kf35@, kf36@, kf37@, 11565 kf38@, kf39@, kf40@, kf41@, kf42@, kf43@, kf44@, kf45@, kf46@, kf9@, 11566 kfnd=\EOx, khlp=\EOm, kich1=\ENj, kmov=\ENc, kmrk=\ENi, 11567 kmsg=\EOl, knp=\E[U, knxt=\ENh, kopn=\EOv, kopt=\EOr, 11568 kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, kref=\EOb, 11569 kres=\EOq, krfr=\ENa, krmir=\ENj, krpl=\EOy, krst=\EOB, 11570 ksav=\EOo, kslt=\ENI, kspd=\EOp, kund=\EOs, use=att620, 11571 11572att620-103k-w|AT&T 620; 132 column; 103key keyboard, 11573 cols#132, wsl#132, 11574 is1=\E[8;0|\E[?4;5;13;15l\E[13;20l\E[?3;7h\E[12h, 11575 use=att620-103k, 11576 11577# AT&T (formerly Teletype) 630 Multi-Tasking Graphics terminal 11578# The following SETUP modes are assumed for normal operation: 11579# Local_Echo=Off Gen_Flow=On Return=CR Received_Newline=LF 11580# Font_Size=Large Non-Layers_Window_Cols=80 11581# Non-Layers_Window_Rows=60 11582# Other SETUP modes may be set for operator convenience or communication 11583# requirements. Some capabilities assume a printer attached to the Aux EIA 11584# port. This termcap description is for the Fixed Non-Layers Window. No 11585# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 11586# (att630: added <ich1>, <blink> and <dim> from a BSD termcap file -- esr) 11587att630|AT&T 630 windowing terminal, 11588 OTbs, am, da, db, mir, msgr, npc, xon, 11589 cols#80, it#8, lines#60, lm#0, 11590 bel=^G, blink=\E[5m, cbt=\E[Z, clear=\E[H\E[J, cr=^M, 11591 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 11592 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 11593 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 11594 dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, 11595 el1=\E[1K, home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 11596 il=\E[%p1%dL, il1=\E[L, ind=\ED, indn=\E[%p1%dS, is2=\E[m, 11597 kbs=^H, kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 11598 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kent=^M, 11599 kf10=\ENp, kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, 11600 kf15=\ENu, kf16=\ENv, kf17=\ENw, kf18=\ENx, kf19=\ENy, 11601 kf20=\ENz, kf21=\EN{, kf22=\EN|, kf23=\EN}, kf24=\EN~, 11602 kf9=\ENo, khome=\E[H, kich1=\E[@, kil1=\E[L, mc4=\E[?4i, 11603 mc5=\E[?5i, nel=^M^J, pfx=\E[%p1%d;%p2%l%dq%p2%s, rc=\E8, 11604 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmir=\E[4l, rmso=\E[m, 11605 rmul=\E[m, rs2=\Ec, sc=\E7, 11606 sgr=\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%p4%|%t;7%;m, 11607 sgr0=\E[m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 11608att630-24|5630-24|5630DMD-24|630MTG-24|AT&T 630 windowing terminal 24 lines, 11609 lines#24, use=att630, 11610 11611# This is the att700 entry for 700 native emulation of the AT&T 700 11612# terminal. Comments are relative to changes from the 605V2 entry and 11613# att730 on which the entry is based. Comments show the terminfo 11614# capability name, termcap name, and description. 11615# 11616# Here is what's going onm in the init string: 11617# ESC [ 50;4| set 700 native mode (really is 605) 11618# x ESC [ 56;ps| set lines to 24: ps=0; 40: ps=1 (plus status line) 11619# ESC [ 53;0| set GenFlow to Xon/Xoff 11620# ESC [ 8 ;0| set CR on NL 11621# x ESC [ ? 3 l/h set workspace: 80 col(l); 132 col(h) 11622# ESC [ ? 4 l jump scroll 11623# ESC [ ? 5 l/h video: normal (l); reverse (h) 11624# ESC [ ?13 l Labels on 11625# ESC [ ?15 l parity check = no 11626# ESC [ 13 l monitor mode off 11627# ESC [ 20 l LF on NL (not CRLF on NL) 11628# ESC [ ? 7 h autowrap on 11629# ESC [ 12 h local echo off 11630# ESC ( B GO = ASCII 11631# ESC ) 0 G1 = Special Char & Line Drawing 11632# ESC [ ? 31 l Set 7 bit controls 11633# 11634# Note: Most terminals, especially the 600 family use Reverse Video for 11635# standout mode. DEC also uses reverse video. The VT100 uses bold in addition 11636# Assume we should stay with reverse video for 70.. However, the 605V2 exits 11637# standout mode with \E[m (all normal attributes). The 730 entry simply 11638# exits reverse video which would leave other current attributes intact. It 11639# was assumed the 730 entry to be more correct so rmso has changed. The 11640# 605V2 has no sequences to turn individual attributes off, thus its setting 11641# and the rmso/smso settings from the 730. 11642# 11643# Note: For the same reason as above in rmso I changed exit under-score mode 11644# to specifically turn off underscore, rather than return to all normal 11645# attributes 11646# 11647# Note: The following pkey_xmit is taken from the 605V2 which contained the 11648# capability as pfxl. It was changed here to pfx since pfxl 11649# will only compile successfully with Unix 4.0 tic. Also note that pfx only 11650# allows strings to be parameters and label values must be programmed as 11651# constant strings. Supposedly the pfxl of Version 4.0 allows both labels 11652# and strings to be parameters. The 605V2 pfx entry should be examined later 11653# in this regard. For reference the 730 pfxl entry is shown here for comparison 11654# 730 pfx entry: 11655# pfxl=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq\s\s\s 11656# SYS\s\s\s\s\sF%p1%:-2d\s\s%e;0;3q%;%p2%s, 11657# 11658# (for 4.0 tic) 11659# pfxl=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 11660# 11661# (for <4.0 tic) 11662# pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 11663# 11664# From the AT&T 705 Multi-tasking terminal user's guide Page 8-8,8-9 11665# 11666# Port1 Interface 11667# 11668# modular 10 pin Connector 11669# Left side Right side 11670# Pin 1 2 3 4 5 6 7 8 9 10 11671# 11672# Key (notch) at bottom 11673# 11674# Pin 1 DSR 11675# 3 DCD 11676# 4 DTR 11677# 5 Sig Ground 11678# 6 RD 11679# 7 SD 11680# 8 CTS 11681# 9 RTS 11682# 10 Frame Ground 11683# 11684# The manual is 189 pages and is loaded with details about the escape codes, 11685# etc..... Available from AT&T CIC 800-432-6600... 11686# ask for Document number 999-300-660.. 11687# 11688att700|AT&T 700 24x80 column display w/102key keyboard, 11689 am, eslok, hs, mir, msgr, xenl, xon, 11690 cols#80, it#8, lh#2, lines#24, lw#8, nlab#8, wsl#80, 11691 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11692 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 11693 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 11694 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11695 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11696 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11697 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 11698 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 11699 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fln=4\,4, 11700 fsl=\E8, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 11701 il=\E[%p1%dL, il1=\E[L, ind=\ED, invis=\E[8m, 11702 is2=\E[50;4|\E[53;0|\E[8;0|\E[?4;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)0\E[?31l\E[0m\017, 11703 is3=\E(B\E)0, kLFT=\E[ A, kRIT=\E[ @, kbs=^H, kcbt=\E[Z, 11704 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 11705 kdch1=\E[P, kdl1=\E[M, kend=\E[24;1H, kf1=\EOc, kf10=\ENp, 11706 kf11=\ENq, kf12=\ENr, kf13=\ENs, kf14=\ENt, kf15=\EOC, 11707 kf16=\EOD, kf17=\EOE, kf18=\EOF, kf19=\EOG, kf2=\EOd, 11708 kf20=\EOH, kf21=\EOI, kf22=\EOJ, kf23=\ENO, kf24=\ENP, 11709 kf25=\ENQ, kf26=\ENR, kf27=\ENS, kf28=\ENT, kf29=\EOq, 11710 kf3=\EOe, kf30=\EOr, kf31=\EOs, kf32=\EOt, kf33=\EOu, 11711 kf34=\EOv, kf35=\EOw, kf36=\EOx, kf37=\EOy, kf38=\EOu, 11712 kf39=\EOv, kf4=\EOf, kf40=\EOl, kf41=\EOq, kf42=\EOr, 11713 kf43=\EOs, kf44=\EOp, kf45=\EOn, kf46=\EOM, kf5=\EOg, 11714 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 11715 kich1=\E[@, kil1=\E[L, knp=\E[U, kpp=\E[V, ll=\E[24H, 11716 mc0=\E[i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 11717 pfx=\E[%p1%d;%p2%l%02dq%?%p1%{9}%<%t F%p1%1d %;%p2%s, 11718 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, 11719 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, 11720 rmir=\E[4l, rmln=\E[2p, rmso=\E[27m, rmul=\E[24m, 11721 rmxon=\E[53;3|, rs1=\Ec\E[?3;5l\E[56;0|, sc=\E7, 11722 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11723 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smln=\E[p, smso=\E[7m, 11724 smul=\E[4m, smxon=\E[53;0|, tbc=\E[3g, 11725 tsl=\E7\E[99;%i%p1%dx, 11726 11727# This entry was modified 3/13/90 by JWE. 11728# fixes include additions of <enacs>, correcting <rep>, and modification 11729# of <kHOM>. (See comments below) 11730# att730 has status line of 80 chars 11731# These were commented out: <indn=\E[%p1%dS>, <rin=\E[%p1%dT>, 11732# the <kf25> and up keys are used for shifted system Fkeys 11733# NOTE: JWE 3/13/90 The 98 key keyboard translation for shift/HOME is 11734# currently the same as <khome> (unshifted HOME or \E[H). On the 102, 102+1 11735# and 122 key keyboards, the 730's translation is \E[2J. For consistency 11736# <kHOM> has been commented out. The user can uncomment <kHOM> if using the 11737# 102, 102+1, or 122 key keyboards 11738# kHOM=\E[2J, 11739# (att730: I added <rmam>/<smam> based on the init string -- esr) 11740att730|AT&T 730 windowing terminal, 11741 am, da, db, eslok, hs, mir, msgr, npc, xenl, xon, 11742 cols#80, it#8, lh#2, lines#60, lm#0, lw#8, nlab#24, wsl#80, 11743 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11744 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[?25l, 11745 clear=\E[H\E[J, cnorm=\E[?25h\E[?12l, cr=^M, 11746 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 11747 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11748 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11749 cvvis=\E[?12;25h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 11750 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, el1=\E[1K, 11751 enacs=\E(B\E)0, flash=\E[?5h$<200>\E[?5l, fsl=\E8, 11752 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, 11753 ind=\ED, invis=\E[8m, 11754 is1=\E[8;0|\E[?3;4;5;13;15l\E[13;20l\E[?7h\E[12h\E(B\E)B, 11755 is2=\E[m\017, is3=\E(B\E)0, kLFT=\E[ @, kRIT=\E[ A, kbs=^H, 11756 kcbt=\E[Z, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 11757 kcuu1=\E[A, kf1=\EOc, kf10=\ENp, kf11=\ENq, kf12=\ENr, 11758 kf13=\ENs, kf14=\ENt, kf15=\ENu, kf16=\ENv, kf17=\ENw, 11759 kf18=\ENx, kf19=\ENy, kf2=\EOd, kf20=\ENz, kf21=\EN{, 11760 kf22=\EN|, kf23=\EN}, kf24=\EN~, kf25=\EOC, kf26=\EOD, 11761 kf27=\EOE, kf28=\EOF, kf29=\EOG, kf3=\EOe, kf30=\EOH, 11762 kf31=\EOI, kf32=\EOJ, kf33=\ENO, kf34=\ENP, kf35=\ENQ, 11763 kf36=\ENR, kf37=\ENS, kf38=\ENT, kf39=\EOU, kf4=\EOf, 11764 kf40=\EOV, kf41=\EOW, kf42=\EOX, kf43=\EOY, kf44=\EOZ, 11765 kf45=\EO[, kf46=\EO\s, kf47=\EO], kf48=\EO\^, kf5=\EOg, 11766 kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\ENo, khome=\E[H, 11767 kich1=\E[@, kil1=\E[L, kind=\E[S, kri=\E[T, 11768 mc0=\E[?19h\E[0i, mc4=\E[?4i, mc5=\E[?5i, nel=\EE, 11769 pfx=\E[%?%p1%{25}%<%t%p1%e%p1%{24}%-%;%d;%p2%l%02d%?%p1%{25}%<%tq SYS F%p1%:-2d %e;0;3q%;%p2%s, 11770 pfxl=\E[%p1%d;%p2%l%02d;0;0q%p3%:-16.16s%p2%s, 11771 pln=\E[%p1%d;0;0;0q%p2%:-16.16s, rc=\E8, 11772 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, ri=\EM, rmacs=^O, 11773 rmam=\E[?7l, rmir=\E[4l, rmln=\E[?13h, rmso=\E[27m, 11774 rmul=\E[24m, rmxon=\E[?21l, rs2=\Ec\E[?3l, sc=\E7, 11775 sgr=\E[0%?%p6%t;1%;%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p3%p1%|%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 11776 sgr0=\E[m\017, smacs=^N, smam=\E[?7h, smir=\E[4h, 11777 smln=\E[?13l, smso=\E[7m, smul=\E[4m, smxon=\E[?21h, 11778 swidm=\E#6, tsl=\E7\E[;%i%p1%dx, 11779att730-41|730MTG-41|AT&T 730-41 windowing terminal Version, 11780 lines#41, use=att730, 11781att730-24|730MTG-24|AT&T 730-24 windowing terminal Version, 11782 lines#24, use=att730, 11783att730r|730MTGr|AT&T 730 rev video windowing terminal Version, 11784 flash=\E[?5l$<200>\E[?5h, 11785 is1=\E[8;0|\E[?3;4;13;15l\E[?5h\E[13;20l\E[?7h\E[12h\E(B\E)B, 11786 use=att730, 11787att730r-41|730MTG-41r|AT&T 730r-41 rev video windowing terminal Version, 11788 lines#41, use=att730r, 11789att730r-24|730MTGr-24|AT&T 730r-24 rev video windowing terminal Version, 11790 lines#24, use=att730r, 11791 11792# The following represents the screen layout along with the associated 11793# bezel buttons for the 5430/pt505 terminal. The "kf" designations do 11794# not appear on the screen but are shown to reference the bezel buttons. 11795# The "CMD", "MAIL", and "REDRAW" buttons are shown in their approximate 11796# position relative to the screen. 11797# 11798# 11799# 11800# +----------------------------------------------------------------+ 11801# | | 11802# XXXX | kf0 kf24 | XXXX 11803# | | 11804# | | 11805# XXXX | kf1 kf23 | XXXX 11806# | | 11807# | | 11808# XXXX | kf2 kf22 | XXXX 11809# | | 11810# | | 11811# XXXX | kf3 kf21 | XXXX 11812# | | 11813# | | 11814# XXXX | kf4 kf20 | XXXX 11815# | | 11816# | | 11817# XXXX | kf5 kf19 | XXXX 11818# | | 11819# | | 11820# XXXX | kf6 kf18 | XXXX 11821# | | 11822# | | 11823# XXXX | | XXXX 11824# | | 11825# | | 11826# +----------------------------------------------------------------+ 11827# 11828# XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX 11829# 11830# Note: XXXX represents the screen buttons 11831# CMD REDRAW 11832# 11833# MAIL 11834# 11835# version 1 note: 11836# The character string sent by key 'kf26' may be user programmable 11837# to send either \E[16s, or \E[26s. 11838# The character string sent by key 'krfr' may be user programmable 11839# to send either \E[17s, or \E[27s. 11840# 11841# Depression of the "CMD" key sends \E! (kcmd) 11842# Depression of the "MAIL" key sends \E[26s (kf26) 11843# "REDRAW" same as "REFRESH" (krfr) 11844# 11845# "kf" functions adds carriage return to output string if terminal is in 11846# 'new line' mode. 11847# 11848# The following are functions not covered in the table above: 11849# 11850# Set keyboard character (SKC): \EPn1;Pn2w 11851# Pn1= 0 Back Space key 11852# Pn1= 1 Break key 11853# Pn2= Program char (hex) 11854# 11855# Screen Definition (SDF): \E[Pn1;Pn2;Pn3;Pn4;Pn5t 11856# Pn1= Window number (1-39) 11857# Pn2-Pn5= Y;X;Y;X coordinates 11858# 11859# Screen Selection (SSL): \E[Pnu 11860# Pn= Window number 11861# 11862# Set Terminal Modes (SM): \E[Pnh 11863# Pn= 3 Graphics mode 11864# Pn= > Cursor blink 11865# Pn= < Enter new line mode 11866# Pn= = Enter reverse insert/replace mode 11867# Pn= ? Enter no scroll mode 11868# 11869# Reset Terminal Mode (RM): \E[Pnl 11870# Pn= 3 Exit graphics mode 11871# Pn= > Exit cursor blink 11872# Pn= < Exit new line mode 11873# Pn= = Exit reverse insert/replace mode 11874# Pn= ? Exit no scroll mode 11875# 11876# Screen Status Report (SSR): \E[Pnp 11877# Pn= 0 Request current window number 11878# Pn= 1 Request current window dimensions 11879# 11880# Device Status Report (DSR): \E[6n Request cursor position 11881# 11882# Call Status Report (CSR): \E[Pnv 11883# Pn= 0 Call failed 11884# Pn= 1 Call successful 11885# 11886# Transparent Button String (TBS): \E[Pn1;Pn2;Pn3;{string 11887# Pn1= Button number to be loaded 11888# Pn2= Character count of "string" 11889# Pn3= Key mode being loaded: 11890# 0= Unshifted 11891# 1= Shifted 11892# 2= Control 11893# String= Text string (15 chars max) 11894# 11895# Screen Number Report (SNR): \E[Pnp 11896# Pn= Screen number 11897# 11898# Screen Dimension Report (SDR): \E[Pn1;Pn2r 11899# Pn1= Number of rows available in window 11900# Pn2= Number of columns available in window 11901# 11902# Cursor Position Report (CPR): \E[Pn1;Pn2R 11903# Pn1= "Y" Position of cursor 11904# Pn2= "X" Position of cursor 11905# 11906# Request Answer Back (RAB): \E[c 11907# 11908# Answer Back Response (ABR): \E[?;*;30;VSV 11909# *= 0 No printer available 11910# *= 2 Printer available 11911# V= Software version number 11912# SV= Software sub version number 11913# (printer-available field not documented in v1) 11914# 11915# Screen Alignment Aid: \En 11916# 11917# Bell (lower pitch): \E[x 11918# 11919# Dial Phone Number: \EPdstring\ 11920# string= Phone number to be dialed 11921# 11922# Set Phone Labels: \EPpstring\ 11923# string= Label for phone buttons 11924# 11925# Set Clock: \EPchour;minute;second\ 11926# 11927# Position Clock: \EPsY;X\ 11928# Y= "Y" coordinate 11929# X= "X" coordinate 11930# 11931# Delete Clock: \Epr\ 11932# 11933# Programming The Function Buttons: \EPfPn;string\ 11934# Pn= Button number (00-06, 18-24) 11935# (kf00-kf06, kf18-kf24) 11936# string= Text to sent on button depression 11937# 11938# The following in version 2 only: 11939# 11940# Request For Local Directory Data: \EPp12;\ 11941# 11942# Local Directory Data to host: \EPp11;LOCAL...DIRECTORY...DATA\ 11943# 11944# Request for Local Directory Data in print format: \EPp13;\ 11945# 11946# Enable 'Prt on Line' mode: \022 (DC2) 11947# 11948# Disable 'Prt on Line' mode: \024 (DC4) 11949# 11950 11951# 05-Aug-86: 11952# The following Terminfo entry describes functions which are supported by 11953# the AT&T 5430/pt505 terminal software version 2 and later. 11954att505|pt505|att5430|gs5430|AT&T Personal Terminal 505 or 5430 GETSET terminal, 11955 am, xon, 11956 cols#80, it#8, lines#24, 11957 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 11958 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[2J\E[H, 11959 cnorm=\E[>l, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 11960 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 11961 cup=\E[%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 11962 cvvis=\E[>h, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 11963 dl1=\E[M, ed=\E[0J, el=\E[0K, el1=\E[2K, home=\E[H, ht=^I, 11964 il=\E[%p1%dL, il1=\E[L, ind=^J, 11965 is1=\EPr\\E[0u\E[2J\E[0;0H\E[m\E[3l\E[<l\E[4l\E[>l\E[=l\E[?l, 11966 kbs=^H, kcmd=\E!, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 11967 kcuu1=\E[A, kf0=\E[00s, kf1=\E[01s, kf18=\E[18s, 11968 kf19=\E[19s, kf2=\E[02s, kf20=\E[20s, kf21=\E[21s, 11969 kf22=\E[22s, kf23=\E[23s, kf24=\E[24s, kf26=\E[26s, 11970 kf3=\E[03s, kf4=\E[04s, kf5=\E[05s, kf6=\E[06s, 11971 krfr=\E[27s, mc4=\E[4i, mc5=\E[5i, rc=\E8, rev=\E[7m, 11972 rmacs=\E[10m, rmam=\E[11;1j, rmir=\E[4l, rmso=\E[m, 11973 rmul=\E[m, rs1=\Ec, sc=\E7, sgr0=\E[m, smacs=\E[11m, 11974 smam=\E[11;0j, smir=\E[4h, smso=\E[1m, smul=\E[4m, 11975 11976# The following Terminfo entry describes functions which are supported by 11977# the AT&T 5430/pt505 terminal software version 1. 11978att505-24|pt505-24|gs5430-24|AT&T PT505 or 5430 GETSET version 1 24 lines, 11979 lines#24, 11980 mc4@, mc5@, rc@, rmam@, sc@, smam@, use=att505, 11981tt505-22|pt505-22|gs5430-22|AT&T PT505 or 5430 GETSET version 1 22 lines, 11982 lines#22, use=att505, 11983# 11984#### ------------------ TERMINFO FILE CAN BE SPLIT HERE --------------------- 11985# This cut mark helps make life less painful for people running ncurses tic 11986# on machines with relatively little RAM. The file can be broken in half here 11987# cleanly and compiled in sections -- no `use' references cross this cut 11988# going forward. 11989# 11990 11991#### Ampex (Dialogue) 11992# 11993# Yes, these are the same people who are better-known for making audio- and 11994# videotape. I'm told they are located in Redwood City, CA. 11995# 11996 11997# From: <cbosg!ucbvax!SRC:george> Fri Sep 11 22:38:32 1981 11998# (ampex80: some capabilities merged in from SCO's entry -- esr) 11999ampex80|a80|d80|dialogue|dialogue80|ampex dialogue 80, 12000 OTbs, am, bw, ul, 12001 cols#80, it#8, lines#24, 12002 bel=^G, cbt=\EI, clear=\E*$<75>, cr=^M, cub1=^H, cud1=^J, 12003 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 12004 dch1=\EW, dl1=\ER$<5*>, ed=\Ey, el=\Et, ht=^I, hts=\E1, 12005 ich1=\EQ, il1=\EE$<5*>, ind=^J, is2=\EA, rmso=\Ek, rmul=\Em, 12006 smso=\Ej, smul=\El, tbc=\E3, 12007# This entry was from somebody anonymous, Tue Aug 9 20:11:37 1983, who wrote: 12008ampex175|ampex d175, 12009 am, 12010 cols#80, lines#24, 12011 bel=^G, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 12012 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 12013 dl1=\ER, ed=\Ey, el=\Et, home=^^, ich1=\EQ, il1=\EE, ind=^J, 12014 is2=\EX\EA\EF, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 12015 kdch1=\EW, kdl1=\ER, khome=^^, kich1=\EQ, kil1=\EE, ll=^^^K, 12016 rmcup=\EF, rmso=\Ek, rmul=\Em, smcup=\EN, smso=\Ej, smul=\El, 12017# No backspace key in the main QWERTY cluster. Fortunately, it has a 12018# NEWLINE/PAGE key just above RETURN that sends a strange single-character 12019# code. Given a suitable Unix (one that lets you set an echo-erase-as-BS-SP-BS 12020# mode), this key can be used as the erase key; I find I like this. Because 12021# some people and some systems may not, there is another termcap ("ampex175") 12022# that suppresses this little eccentricity by omitting the relevant capability. 12023ampex175-b|ampex d175 using left arrow for erase, 12024 kbs=^_, use=ampex175, 12025# From: Richard Bascove <atd!dsd!rcb@ucbvax.berkeley.edu> 12026# (ampex210: removed obsolete ":kn#10:" -- esr) 12027ampex210|a210|ampex a210, 12028 OTbs, am, hs, xenl, 12029 cols#80, it#8, lines#24, xmc#1, 12030 cbt=\EI, clear=\E*, cub1=^H, cuf1=^L, 12031 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 12032 dl1=\ER, ed=\Ey, el=\Et, flash=\EU\EX\EU\EX\EU\EX\EU\EX, 12033 fsl=\E.2, home=^^, ht=^I, ich1=\EQ, 12034 if=/usr/share/tabset/std, il1=\EE, invis@, 12035 is2=\EC\Eu\E'\E(\El\EA\E%\E{\E.2\EG0\Ed\En, kcub1=^H, 12036 kcud1=^V, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A1\r, 12037 kf2=^A2\r, kf3=^A3\r, kf4=^A4\r, kf5=^A5\r, kf6=^A6\r, 12038 kf7=^A7\r, kf8=^A8\r, kf9=^A9\r, khome=^^, 12039 tsl=\E.0\Eg\E}\Ef, use=adm+sgr, 12040# (ampex219: I added <rmam>/<smam> based on the init string, added <cvvis> 12041# from ampex219w, added <cnorm>=\E[?3l, irresistibly suggested by <cvvis>, 12042# and moved the padding to be *after* the caps -- esr) 12043ampex219|ampex-219|amp219|Ampex with Automargins, 12044 hs, xenl, 12045 cols#80, it#8, lines#24, 12046 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, cbt=\E[Z, 12047 clear=\E[H\E[2J$<50>, cnorm=\E[?3l, cr=^M, 12048 csr=%i\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, 12049 cuf1=\E[C$<2>, cup=\E[%i%p1%d;%p2%dH$<5>, 12050 cuu1=\E[A$<2>, cvvis=\E[?3h, dim=\E[1m, ed=\E[J$<50>, 12051 el=\E[K$<3>, home=\E[H, ht=^I, ind=^J, 12052 is2=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 12053 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[21~, 12054 kf1=\E[7~, kf2=\E[8~, kf3=\E[9~, kf4=\E[10~, kf5=\E[11~, 12055 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, khome=\E[H, 12056 rev=\E[7m, ri=\EM$<5>, rmam=\E[?7l, rmkx=\E>, 12057 rmso=\E[m$<2>, rmul=\E[m$<2>, sgr0=\E[m$<2>, smam=\E[?7h, 12058 smkx=\E=, smso=\E[7m$<2>, smul=\E[4m$<2>, 12059ampex219w|ampex-219w|amp219w|Ampex 132 cols, 12060 cols#132, lines#24, 12061 bel=^G, cr=^M, cud1=^J, ind=^J, 12062 is2=\E>\E[?3h\E[?4l\E[?5l\E[?7h\E[?8h, use=ampex219, 12063# (ampex232: removed <if=/usr/share/tabset/ampex>, no file and no <hts> --esr) 12064ampex232|ampex-232|Ampex Model 232, 12065 am, 12066 cols#80, lines#24, xmc#1, 12067 cbt=\EI, civis=\E.0, clear=\E+, cnorm=\E.4, cub1=^H, cud1=^V, 12068 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 12069 dch1=\EW, dl1=\ER$<5*/>, ed=\EY, el=\ET, 12070 flash=\Eb$<200/>\Ed, ht=^I, ich1=\EQ, il1=\EE$<5*/>, 12071 invis@, is2=\Eg\El, kbs=^H, kcub1=^H, kcud1=^V, kcuf1=^L, 12072 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, 12073 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, 12074 kf9=^AI\r, khome=^^, use=adm+sgr, 12075# (ampex: removed <if=/usr/share/tabset/amp-132>, no file and no <hts> -- esr) 12076ampex232w|Ampex Model 232 / 132 columns, 12077 cols#132, lines#24, 12078 is2=\E\034Eg\El, use=ampex232, 12079 12080#### Ann Arbor (aa) 12081# 12082# Ann Arbor made dream terminals for hackers -- large screen sizes and huge 12083# numbers of function keys. At least some used monitors in portrait mode, 12084# allowing up to 76-character screen heights! They were reachable at: 12085# 12086# Ann Arbor Terminals 12087# 6175 Jackson Road 12088# Ann Arbor, MI 48103 12089# (313)-663-8000 12090# 12091# But in 1996 the phone number reaches some kitschy retail shop, and Ann Arbor 12092# can't be found on the Web; I fear they're long dead. R.I.P. 12093# 12094 12095 12096# Originally from Mike O'Brien@Rand and Howard Katseff at Bell Labs. 12097# Highly modified 6/22 by Mike O'Brien. 12098# split out into several for the various screen sizes by dave-yost@rand 12099# Modifications made 3/82 by Mark Horton 12100# Modified by Tom Quarles at UCB for greater efficiency and more diversity 12101# status line moved to top of screen, <flash> removed 5/82 12102# Some unknown person at SCO then hacked the init strings to make them more 12103# efficient. 12104# 12105# assumes the following setup: 12106# A menu: 0000 1010 0001 0000 12107# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 12108# C menu: 56 66 0 0 9600 0110 1100 12109# D menu: 0110 1001 1 0 12110# 12111# Briefly, the settings are for the following modes: 12112# (values are for bit set/clear with * indicating our preference 12113# and the value used to test these termcaps) 12114# Note that many of these settings are irrelevent to the terminfo 12115# and are just set to the default mode of the terminal as shipped 12116# by the factory. 12117# 12118# A menu: 0000 1010 0001 0000 12119# Block/underline cursor* 12120# blinking/nonblinking cursor* 12121# key click/no key click* 12122# bell/no bell at column 72* 12123# 12124# key pad is cursor control*/key pad is numeric 12125# return and line feed/return for <cr> key * 12126# repeat after .5 sec*/no repeat 12127# repeat at 25/15 chars per sec. * 12128# 12129# hold data until pause pressed/process data unless pause pressed* 12130# slow scroll/no slow scroll* 12131# Hold in area/don't hold in area* 12132# functions keys have default*/function keys disabled on powerup 12133# 12134# show/don't show position of cursor during page transmit* 12135# unused 12136# unused 12137# unused 12138# 12139# B menu: 9600 0100 1000 0000 0000 1000 0000 17 19 12140# Baud rate (9600*) 12141# 12142# 2 bits of parity - 00=odd,01=even*,10=space,11=mark 12143# 1 stop bit*/2 stop bits 12144# parity error detection off*/on 12145# 12146# keyboard local/on line* 12147# half/full duplex* 12148# disable/do not disable keyboard after data transmission* 12149# 12150# transmit entire page/stop transmission at cursor* 12151# transfer/do not transfer protected characters* 12152# transmit all characters/transmit only selected characters* 12153# transmit all selected areas/transmit only 1 selected area* 12154# 12155# transmit/do not transmit line separators to host* 12156# transmit/do not transmit page tab stops tabs to host* 12157# transmit/do not transmit column tab stop tabs to host* 12158# transmit/do not transmit graphics control (underline,inverse..)* 12159# 12160# enable*/disable auto XON/XOFF control 12161# require/do not require receipt of a DC1 from host after each LF* 12162# pause key acts as a meta key/pause key is pause* 12163# unused 12164# 12165# unused 12166# unused 12167# unused 12168# unused 12169# 12170# XON character (17*) 12171# XOFF character (19*) 12172# 12173# C menu: 56 66 0 0 9600 0110 1100 12174# number of lines to print data on (printer) (56*) 12175# 12176# number of lines on a sheet of paper (printer) (66*) 12177# 12178# left margin (printer) (0*) 12179# 12180# number of pad chars on new line to printer (0*) 12181# 12182# printer baud rate (9600*) 12183# 12184# printer parity: 00=odd,01=even*,10=space,11=mark 12185# printer stop bits: 2*/1 12186# print/do not print guarded areas* 12187# 12188# new line is: 01=LF,10=CR,11=CRLF* 12189# unused 12190# unused 12191# 12192# D menu: 0110 1001 1 0 12193# LF is newline/LF is down one line, same column* 12194# wrap to preceding line if move left from col 1*/don't wrap 12195# wrap to next line if move right from col 80*/don't wrap 12196# backspace is/is not destructive* 12197# 12198# display*/ignore DEL character 12199# display will not/will scroll* 12200# page/column tab stops* 12201# erase everything*/erase unprotected only 12202# 12203# editing extent: 0=display,1=line*,2=field,3=area 12204# 12205# unused 12206# 12207 12208annarbor4080|aa4080|ann arbor 4080, 12209 OTbs, am, 12210 cols#80, lines#40, 12211 bel=^G, clear=\014$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=^_, 12212 cup=\017%p2%{10}%/%{16}%*%p2%{10}%m%+%c%p1%?%p1%{19}%>%t%{12}%+%;%{64}%+%c, 12213 cuu1=^N, home=^K, ht=^I, hts=^]^P1, ind=^J, kbs=^^, kcub1=^H, 12214 kcud1=^J, kcuf1=^_, kcuu1=^N, khome=^K, tbc=^\^P^P, 12215 12216# Strange Ann Arbor terminal from BRL 12217aas1901|Ann Arbor K4080 w/S1901 mod, 12218 am, 12219 cols#80, lines#40, 12220 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^N, 12221 home=^K, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, ll=^O\0c, 12222 nel=^M^J, 12223 12224# If you're using the GNU termcap library, add 12225# :cS=\E[%p1%d;%p2%d;%p3%d;%p4%dp: 12226# to these capabilities. This is the nonstandard GNU termcap scrolling 12227# capability, arguments are: 12228# 1. Total number of lines on the screen. 12229# 2. Number of lines above desired scroll region. 12230# 3. Number of lines below (outside of) desired scroll region. 12231# 4. Total number of lines on the screen, the same as the first parameter. 12232# The generic Ann Arbor entry is the only one that uses this. 12233aaa+unk|aaa-unk|ann arbor ambassador (internal - don't use this directly), 12234 OTbs, am, km, mc5i, mir, xon, 12235 cols#80, it#8, 12236 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 12237 clear=\E[H\E[J$<156>, cr=^M, cub=\E[%p1%dD, cub1=^H, 12238 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, 12239 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 12240 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, 12241 el=\E[K$<5>, home=\E[H, hpa=\E[%p1%{1}%+%dG, ht=^I, 12242 hts=\EH, ich=\E[%p1%d@$<4*>, ich1=\E[@$<4>, il=\E[%p1%dL, 12243 il1=\E[L$<3>, ind=^K, invis=\E[8m, is1=\E[m\E7\E[H\E9\E8, 12244 is3=\E[1Q\E[>20;30l\EP`+x~M\E\\, kbs=^H, kcbt=\E[Z, 12245 kclr=\E[J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12246 kdch1=\E[P, kdl1=\E[M, kf1=\EOA, kf10=\EOJ, kf11=\EOK, 12247 kf12=\EOL, kf13=\EOM, kf14=\EON, kf15=\EOO, kf16=\EOP, 12248 kf17=\EOQ, kf18=\EOR, kf19=\EOS, kf2=\EOB, kf20=\EOT, 12249 kf21=\EOU, kf22=\EOV, kf23=\EOW, kf24=\EOX, kf3=\EOC, 12250 kf4=\EOD, kf5=\EOE, kf6=\EOF, kf7=\EOG, kf8=\EOH, kf9=\EOI, 12251 khome=\E[H, kich1=\E[@, kil1=\E[L, krmir=\E6, mc0=\E[0i, 12252 mc4=^C, mc5=\E[v, mc5p=\E[%p1%dv, rc=\E8, 12253 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, 12254 rmkx=\EP`>y~[[J`8xy~[[A`4xy~[[D`6xy~[[C`2xy~[[B\E\\, 12255 rmm=\E[>52l, rmso=\E[m, rmul=\E[m, sc=\E7, 12256 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 12257 sgr0=\E[m, 12258 smkx=\EP`>z~[[J`8xz~[[A`4xz~[[D`6xz~[[C`2xz~[[B\E\\, 12259 smm=\E[>52h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 12260 vpa=\E[%p1%{1}%+%dd, 12261 12262aaa+rv|ann arbor ambassador in reverse video, 12263 blink=\E[5;7m, bold=\E[1;7m, invis=\E[7;8m, 12264 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, 12265 rs1=\E[H\E[7m\E[J$<156>, 12266 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p2%|%p3%!%t7;%;%?%p7%t8;%;m\016, 12267 sgr0=\E[7m\016, smso=\E[m, smul=\E[4;7m, 12268# Ambassador with the DEC option, for partial vt100 compatibility. 12269aaa+dec|ann arbor ambassador in dec vt100 mode, 12270 acsc=aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}, 12271 csr=\E[%i%p1%d;%p2%dr, enacs=\E(0, rmacs=^N, 12272 sgr=\E[%?%p2%t4;%;%?%p4%t5;%;%?%p6%t1;%;%?%p1%p3%|%!%t7;%;%?%p7%t8;%;m%?%p9%t\017%e\016%;, 12273 smacs=^O, 12274aaa-18|ann arbor ambassador/18 lines, 12275 lines#18, 12276 is2=\E7\E[60;0;0;18p\E8, 12277 rmcup=\E[60;0;0;18p\E[60;1H\E[K, smcup=\E[18;0;0;18p, 12278 use=aaa+unk, 12279aaa-18-rv|ann arbor ambassador/18 lines+reverse video, 12280 use=aaa+rv, use=aaa-18, 12281aaa-20|ann arbor ambassador/20 lines, 12282 lines#20, 12283 is2=\E7\E[60;0;0;20p\E8, 12284 rmcup=\E[60;0;0;20p\E[60;1H\E[K, smcup=\E[20;0;0;20p, 12285 use=aaa+unk, 12286aaa-22|ann arbor ambassador/22 lines, 12287 lines#22, 12288 is2=\E7\E[60;0;0;22p\E8, 12289 rmcup=\E[60;0;0;22p\E[60;1H\E[K, smcup=\E[22;0;0;22p, 12290 use=aaa+unk, 12291aaa-24|ann arbor ambassador/24 lines, 12292 lines#24, 12293 is2=\E7\E[60;0;0;24p\E8, 12294 rmcup=\E[60;0;0;24p\E[60;1H\E[K, smcup=\E[24;0;0;24p, 12295 use=aaa+unk, 12296aaa-24-rv|ann arbor ambassador/24 lines+reverse video, 12297 use=aaa+rv, use=aaa-24, 12298aaa-26|ann arbor ambassador/26 lines, 12299 lines#26, 12300 is2=\E7\E[60;0;0;26p\E8, 12301 rmcup=\E[60;0;0;26p\E[26;1H\E[K, 12302 smcup=\E[H\E[J$<156>\E[26;0;0;26p, use=aaa+unk, 12303aaa-28|ann arbor ambassador/28 lines, 12304 lines#28, 12305 is2=\E7\E[60;0;0;28p\E8, 12306 rmcup=\E[60;0;0;28p\E[28;1H\E[K, 12307 smcup=\E[H\E[J$<156>\E[28;0;0;28p, use=aaa+unk, 12308aaa-30-s|aaa-s|ann arbor ambassador/30 lines w/status, 12309 eslok, hs, 12310 lines#29, 12311 dsl=\E7\E[60;0;0;30p\E[1;1H\E[K\E[H\E8\r\n\E[K, 12312 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;30p\E8, 12313 rmcup=\E[60;1;0;30p\E[29;1H\E[K, 12314 smcup=\E[H\E[J$<156>\E[30;1;0;30p\E[30;1H\E[K, 12315 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, 12316aaa-30-s-rv|aaa-s-rv|ann arbor ambassador/30 lines+status+reverse video, 12317 use=aaa+rv, use=aaa-30-s, 12318aaa-s-ctxt|aaa-30-s-ctxt|ann arbor ambassador/30 lines+status+save context, 12319 rmcup=\E[60;1;0;30p\E[59;1H\E[K, 12320 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s, 12321aaa-s-rv-ctxt|aaa-30-s-rv-ct|ann arbor ambassador/30 lines+status+save context+reverse video, 12322 rmcup=\E[60;1;0;30p\E[59;1H\E[K, 12323 smcup=\E[30;1H\E[K\E[30;1;0;30p, use=aaa-30-s-rv, 12324aaa|aaa-30|ambas|ambassador|ann arbor ambassador/30 lines, 12325 lines#30, 12326 is2=\E7\E[60;0;0;30p\E8, 12327 rmcup=\E[60;0;0;30p\E[30;1H\E[K, 12328 smcup=\E[H\E[J$<156>\E[30;0;0;30p, use=aaa+unk, 12329aaa-30-rv|aaa-rv|ann arbor ambassador/30 lines in reverse video, 12330 use=aaa+rv, use=aaa-30, 12331aaa-30-ctxt|aaa-ctxt|ann arbor ambassador/30 lines; saving context, 12332 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, 12333 use=aaa-30, 12334aaa-30-rv-ctxt|aaa-rv-ctxt|ann arbor ambassador/30 lines reverse video; saving context, 12335 rmcup=\E[60;0;0;30p\E[60;1H\E[K, smcup=\E[30;0;0;30p, 12336 use=aaa+rv, use=aaa-30, 12337aaa-36|ann arbor ambassador/36 lines, 12338 lines#36, 12339 is2=\E7\E[60;0;0;36p\E8, 12340 rmcup=\E[60;0;0;36p\E[36;1H\E[K, 12341 smcup=\E[H\E[J$<156>\E[36;0;0;36p, use=aaa+unk, 12342aaa-36-rv|ann arbor ambassador/36 lines+reverse video, 12343 use=aaa+rv, use=aaa-36, 12344aaa-40|ann arbor ambassador/40 lines, 12345 lines#40, 12346 is2=\E7\E[60;0;0;40p\E8, 12347 rmcup=\E[60;0;0;40p\E[40;1H\E[K, 12348 smcup=\E[H\E[J$<156>\E[40;0;0;40p, use=aaa+unk, 12349aaa-40-rv|ann arbor ambassador/40 lines+reverse video, 12350 use=aaa+rv, use=aaa-40, 12351aaa-48|ann arbor ambassador/48 lines, 12352 lines#48, 12353 is2=\E7\E[60;0;0;48p\E8, 12354 rmcup=\E[60;0;0;48p\E[48;1H\E[K, 12355 smcup=\E[H\E[J$<156>\E[48;0;0;48p, use=aaa+unk, 12356aaa-48-rv|ann arbor ambassador/48 lines+reverse video, 12357 use=aaa+rv, use=aaa-48, 12358aaa-60-s|ann arbor ambassador/59 lines+status, 12359 eslok, hs, 12360 lines#59, 12361 dsl=\E7\E[60;0;0;60p\E[1;1H\E[K\E[H\E8\r\n\E[K, 12362 fsl=\E[>51l, is2=\r\n\E[A\E7\E[60;1;0;60p\E8, 12363 tsl=\E[>51h\E[1;%p1%dH\E[2K, use=aaa+unk, 12364aaa-60-s-rv|ann arbor ambassador/59 lines+status+reverse video, 12365 use=aaa+rv, use=aaa-60-s, 12366aaa-60-dec-rv|ann arbor ambassador/dec mode+59 lines+status+rev video, 12367 use=aaa+dec, use=aaa+rv, use=aaa-60-s, 12368aaa-60|ann arbor ambassador/60 lines, 12369 lines#60, 12370 is2=\E7\E[60;0;0;60p\E[1Q\E[m\E[>20;30l\E8, 12371 use=aaa+unk, 12372aaa-60-rv|ann arbor ambassador/60 lines+reverse video, 12373 use=aaa+rv, use=aaa-60, 12374aaa-db|ann arbor ambassador 30/destructive backspace, 12375 OTbs@, 12376 cub1=\E[D, is3=\E[1Q\E[m\E[>20l\E[>30h, use=aaa-30, 12377 12378guru|guru-33|guru+unk|ann arbor guru/33 lines 80 cols, 12379 lines#33, 12380 flash=\E[>59h$<100>\E[>59l, 12381 is2=\E7\E[255;0;0;33;80;80p\E8\E[J, is3=\E[>59l, 12382 rmcup=\E[255p\E[255;1H\E[K, smcup=\E[33p, use=aaa+unk, 12383guru+rv|guru changes for reverse video, 12384 flash=\E[>59l$<100>\E[>59h, is3=\E[>59h, 12385guru-rv|guru-33-rv|ann arbor guru/33 lines+reverse video, 12386 use=guru+rv, use=guru-33, 12387guru+s|guru status line, 12388 eslok, hs, 12389 dsl=\E7\E[;0p\E[1;1H\E[K\E[H\E8\r\n\E[K, fsl=\E[>51l, 12390 rmcup=\E[255;1p\E[255;1H\E[K, smcup=, 12391 tsl=\E[>51h\E[1;%p1%dH\E[2K, 12392guru-nctxt|guru with no saved context, 12393 smcup=\E[H\E[J$<156>\E[33p\E[255;1H\E[K, use=guru, 12394guru-s|guru-33-s|ann arbor guru/33 lines+status, 12395 lines#32, 12396 is2=\r\n\E[A\E7\E[255;1;0;33;80;80p\E8\E[J, 12397 smcup=\E[33;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 12398guru-24|ann arbor guru 24 lines, 12399 cols#80, lines#24, 12400 is2=\E7\E[255;0;0;24;80;80p\E8\E[J, smcup=\E[24p, 12401 use=guru+unk, 12402guru-44|ann arbor guru 44 lines, 12403 cols#97, lines#44, 12404 is2=\E7\E[255;0;0;44;97;100p\E8\E[J, smcup=\E[44p, 12405 use=guru+unk, 12406guru-44-s|ann arbor guru/44 lines+status, 12407 lines#43, 12408 is2=\r\n\E[A\E7\E[255;1;0;44;80;80p\E8\E[J, 12409 smcup=\E[44;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 12410guru-76|guru with 76 lines by 89 cols, 12411 cols#89, lines#76, 12412 is2=\E7\E[255;0;0;76;89;100p\E8\E[J, smcup=\E[76p, 12413 use=guru+unk, 12414guru-76-s|ann arbor guru/76 lines+status, 12415 cols#89, lines#75, 12416 is2=\r\n\E[A\E7\E[255;1;0;76;89;100p\E8\E[J, 12417 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 12418guru-76-lp|guru-lp|guru with page bigger than line printer, 12419 cols#134, lines#76, 12420 is2=\E7\E[255;0;0;76;134;134p\E8\E[J, smcup=\E[76p, 12421 use=guru+unk, 12422guru-76-w|guru 76 lines by 178 cols, 12423 cols#178, lines#76, 12424 is2=\E7\E[255;0;0;76;178;178p\E8\E[J, smcup=\E[76p, 12425 use=guru+unk, 12426guru-76-w-s|ann arbor guru/76 lines+status+wide, 12427 cols#178, lines#75, 12428 is2=\r\n\E[A\E7\E[255;1;0;76;178;178p\E8\E[J, 12429 smcup=\E[76;1p\E[255;1H\E[K, use=guru+s, use=guru+unk, 12430guru-76-wm|guru 76 lines by 178 cols with 255 cols memory, 12431 cols#178, lines#76, 12432 is2=\E7\E[255;0;0;76;178;255p\E8\E[J, smcup=\E[76p, 12433 use=guru+unk, 12434aaa-rv-unk|ann arbor unknown type, 12435 lh#0, lw#0, nlab#0, 12436 blink=\E[5;7m, bold=\E[1;7m, home=\E[H, invis=\E[7;8m, 12437 is1=\E[7m\E7\E[H\E9\E8, rev=\E[m, rmso=\E[7m, rmul=\E[7m, 12438 rs1=\E[H\E[7m\E[J, 12439 sgr=\E[%?%p6%t1;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p1%!%t7;%;%?%p7%t8;%;m, 12440 sgr0=\E[7m, smso=\E[m, smul=\E[4;7m, 12441 12442#### Applied Digital Data Systems (adds) 12443# 12444# ADDS itself is long gone. ADDS was bought by NCR, and the same group made 12445# ADDS and NCR terminals. When AT&T and NCR merged, the engineering for 12446# terminals was merged again. Then AT&T sold the terminal business to 12447# SunRiver, which later changed its name to Boundless Technologies. The 12448# engineers from Teletype, AT&T terminals, ADDS, and NCR (who are still there 12449# as of early 1995) are at: 12450# 12451# Boundless Technologies 12452# 100 Marcus Boulevard 12453# Hauppauge, NY 11788-3762 12454# Vox: (800)-231-5445 12455# Fax: (516)-342-7378 12456# Web: http://boundless.com 12457# 12458# Their voice mail used to describe the place as "SunRiver (formerly ADDS)". 12459# In 1995 Boundless acquired DEC's terminals business. 12460# 12461 12462# Regent: lowest common denominator, works on all regents. 12463# (regent: renamed ":bc:" to ":le:" -- esr) 12464regent|Adds Regent Series, 12465 OTbs, am, 12466 cols#80, lines#24, 12467 bel=^G, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, cuu1=^Z, 12468 home=\EY\s\s, ind=^J, ll=^A, 12469# Regent 100 has a bug where if computer sends escape when user is holding 12470# down shift key it gets confused, so we avoid escape. 12471regent100|Adds Regent 100, 12472 xmc#1, 12473 bel=^G, 12474 cup=\013%p1%' '%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, 12475 kf0=^B1\r, kf1=^B2\r, kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, 12476 kf5=^B6\r, kf6=^B7\r, kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, 12477 lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, 12478 sgr0=\E0@, smso=\E0P, smul=\E0`, use=regent, 12479regent20|Adds Regent 20, 12480 bel=^G, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, ed=\Ek, el=\EK, 12481 use=regent, 12482regent25|Adds Regent 25, 12483 bel=^G, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, khome=^A, 12484 use=regent20, 12485regent40|Adds Regent 40, 12486 xmc#1, 12487 bel=^G, dl1=\El$<2*>, il1=\EM$<2*>, kf0=^B1\r, kf1=^B2\r, 12488 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, 12489 kf7=^B8\r, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, lf5=F6, 12490 lf6=F7, lf7=F8, rmso=\E0@, rmul=\E0@, sgr0=\E0@, smso=\E0P, 12491 smul=\E0`, use=regent25, 12492regent40+|Adds Regent 40+, 12493 is2=\EB, use=regent40, 12494regent60|regent200|Adds Regent 60, 12495 dch1=\EE, is2=\EV\EB, kdch1=\EE, kich1=\EF, krmir=\EF, 12496 rmir=\EF, rmso=\ER\E0@\EV, smir=\EF, smso=\ER\E0P\EV, 12497 use=regent40+, 12498# From: <edward@onyx.berkeley.edu> Thu Jul 9 09:27:33 1981 12499# (viewpoint: added <kcuf1>, function key, and <dl1> capabilities -- esr) 12500viewpoint|addsviewpoint|adds viewpoint, 12501 OTbs, am, 12502 cols#80, lines#24, 12503 bel=^G, clear=^L, cnorm=\017\E0`, cr=^M, cub1=^H, cud1=^J, 12504 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 12505 cvvis=\017\E0P, dl1=\El, ed=\Ek$<16.1*>, el=\EK$<16>, 12506 ind=^J, is2=\017\E0`, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, 12507 kf0=^B1, kf2=^B2, kf3=^B!, kf4=^B", kf5=^B#, khome=^A, ll=^A, 12508 rmso=^O, rmul=^O, sgr0=^O, smso=^N, smul=^N, 12509# Some viewpoints have bad ROMs that foo up on ^O 12510screwpoint|adds viewpoint with ^O bug, 12511 cvvis@, rmso@, rmul@, smso@, smul@, use=viewpoint, 12512 12513# From: Jay S. Rouman <jsr@dexter.mi.org> 5 Jul 92 12514# The <civis>/<cnorm>/<sgr>/<sgr0> strings were added by ESR from specs. 12515# Theory; the vp3a+ wants \E0%c to set highlights, where normal=01000000, 12516# underline=01100000, rev=01010000, blink=01000010,dim=01000001, 12517# invis=01000100 and %c is the logical or of desired attributes. 12518# There is also a `tag bit' enabling attributes, set by \E) and unset by \E(. 12519# 12520# Update by TD - 2004: 12521# Adapted from 12522# http://www.cs.utk.edu/~shuford/terminal/adds_viewpoint_news.txt 12523# 12524# COMMANDS ASCII CODE 12525# 12526# Address, Absolute ESC,=,row,column 12527# Beep BEL 12528# Aux Port Enable ESC,@ 12529# Aux Port Disable ESC,A 12530# Backspace BS 12531# Cursor back BS 12532# Cursor down LF 12533# Cursor forward FF 12534# Cursor home RS 12535# Cursor up VT 12536# Cursor supress ETB 12537# Cursor enable CAN 12538# Erase to end of line ESC,T 12539# Erase to end of page ESC,Y 12540# Erase screen SUB 12541# Keyboard lock SI 12542# Keyboard unlock SO 12543# Read current cursor position ESC,? 12544# Set Attribute ESC,0,x (see below for values of x) 12545# Tag bit reset ESC,( 12546# Tag bit set ESC,) 12547# Transparent Print on ESC,3 12548# Transparent Print off ESC,4 12549# 12550# 12551# ATTRIBUTES 12552# 12553# Normal @ 0100 12554# Half Intensity A 0101 12555# Blinking B 0102 12556# Half Intensity Blinking C 0103 12557# Reverse Video P 0120 12558# Reverse Video Half Intensity Q 0121 12559# Reverse Video Blinking R 0122 12560# Reverse Video Half Intensity 12561# Blinking S 0123 12562# Underlined ` 0140 12563# Underlined Half Intensity a 0141 12564# Underlined Blinking b 0142 12565# Underlined Half Intensity 12566# Blinking c 0143 12567# Video suppress D 0104 12568vp3a+|viewpoint3a+|adds viewpoint 3a+, 12569 am, bw, 12570 cols#80, it#8, lines#24, 12571 blink=\E0B\E), civis=^W, clear=\E*$<80>, cnorm=^X, cr=^M, 12572 cub1=^H, cud1=^J, cuf1=^L, 12573 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dim=\E0A\E), 12574 ed=\EY$<80>, el=\ET, home=^^, ht=^I, ind=^J, invis=\E0D\E), 12575 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 12576 nel=^M^J, rev=\E0P\E), rmso=\E(, 12577 sgr=%?%p1%p2%|%p3%|%p4%|%p5%|%p7%|%t\E0%{64}%?%p1%t%{17}%|%;%?%p2%t%{32}%|%;%?%p3%t%{16}%|%;%?%p4%t%{2}%|%;%?%p5%t%{1}%|%;%c%?%p7%tD%;\E)%e\E(%;, 12578 sgr0=\E(, smso=\E0Q\E), smul=\E0`\E), 12579vp60|viewpoint60|addsvp60|adds viewpoint60, 12580 use=regent40, 12581# 12582# adds viewpoint 90 - from cornell 12583# Note: emacs sends ei occasionally to insure the terminal is out of 12584# insert mode. This unfortunately puts the viewpoint90 IN insert 12585# mode. A hack to get around this is <ich1=\EF\s\EF^U>. (Also, 12586# - :ei=:im=: must be present in the termcap translation.) 12587# - <xhp> indicates glitch that attributes stick to location 12588# - <msgr> means it's safe to move in standout mode 12589# - <clear=\EG\Ek>: clears screen and visual attributes without affecting 12590# the status line 12591# Function key and label capabilities merged in from SCO. 12592vp90|viewpoint90|adds viewpoint 90, 12593 OTbs, bw, msgr, xhp, 12594 cols#80, lines#24, 12595 clear=\EG\Ek, cub1=^H, cud1=^J, cuf1=^F, 12596 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dch1=\EE, 12597 dl1=\El, ed=\Ek, el=\EK, home=\EY\s\s, ht=^I, 12598 ich1=\EF \EF\025, ind=^J, kbs=^H, kcub1=^U, kcud1=^J, 12599 kcuf1=^F, kcuu1=^Z, kf0=^B1\r, kf1=^B2\r, kf10=^B;\r, 12600 kf2=^B3\r, kf3=^B4\r, kf4=^B5\r, kf5=^B6\r, kf6=^B7\r, 12601 kf7=^B8\r, kf8=^B9\r, kf9=^B\:\r, khome=^A, lf0=F1, lf1=F2, 12602 lf10=F11, lf2=F3, lf3=F4, lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, 12603 lf9=F10, ll=^A, rmso=\ER\E0@\EV, rmul=\ER\E0@\EV, 12604 sgr0=\ER\E0@\EV, smso=\ER\E0Q\EV, smul=\ER\E0`\EV, 12605# Note: if return acts weird on a980, check internal switch #2 12606# on the top chip on the CONTROL pc board. 12607adds980|a980|adds consul 980, 12608 OTbs, am, 12609 cols#80, lines#24, 12610 bel=^G, clear=\014$<1>\013@, cr=^M, cub1=^H, cud1=^J, 12611 cuf1=\E^E01, cup=\013%p1%{64}%+%c\E\005%p2%2d, 12612 dl1=\E\017$<13>, il1=\E\016$<13>, ind=^J, kf0=\E0, kf1=\E1, 12613 kf2=\E2, kf3=\E3, kf4=\E4, kf5=\E5, kf6=\E6, kf7=\E7, kf8=\E8, 12614 kf9=\E9, rmso=^O, sgr0=^O, smso=^Y^^^N, 12615 12616#### C. Itoh Electronics 12617# 12618# As of 1995 these people no longer make terminals (they're still in the 12619# printer business). Their terminals were all clones of the DEC VT series. 12620# They're located in Orange County, CA. 12621# 12622 12623# CIT 80 - vt-52 emulator, the termcap has been modified to remove 12624# the delay times and do an auto tab set rather than the indirect 12625# file used in vt100. 12626cit80|cit-80|citoh 80, 12627 OTbs, am, 12628 cols#80, lines#24, 12629 clear=\E[H\EJ, cr=^M, cub1=^H, cud1=\E[B, cuf1=\E[C, 12630 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\EJ, el=\EK, ff=^L, 12631 ind=^J, is2=\E>, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, 12632 kcuu1=\EOA, rmkx=\E[?1l\E>, smkx=\E[?1h\E=, 12633# From: Tim Wood <mtxinu!sybase!tim> Fri Sep 27 09:39:12 PDT 1985 12634# (cit101: added <rmam>/<smam> based on init string, merged this with c101 -- esr) 12635cit101|citc|C.itoh fast vt100, 12636 OTbs, am, xenl, 12637 cols#80, lines#24, 12638 bel=^G, clear=\E[H\E[2J, cnorm=\E[V\E8, cub1=^H, cud1=\E[B, 12639 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 12640 cvvis=\E7\E[U, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 12641 flash=\E[?5h$<200/>\E[?5l, ich1=\E[@, il1=\E[L, 12642 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[3g\E[>5g, 12643 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 12644 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 12645 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m, 12646 smul=\E[4m, 12647# CIE Terminals CIT-101e from Geoff Kuenning <callan!geoff> via BRL 12648# The following termcap entry was created from the Callan cd100 entry. The 12649# last two lines (with the capabilities in caps) are used by RM-cobol to allow 12650# full selection of combinations of reverse video, underline, and blink. 12651# (cit101e: removed unknown :f0=\EOp:f1=\EOq:f2=\EOr:f3=\EOs:f4=\EOt:f5=\EOu:\ 12652# f6=\EOv:f7=\EOw:f8=\EOx:f9=\EOy:AB=\E[0;5m:AL=\E[m:AR=\E[0;7m:AS=\E[0;5;7m:\ 12653# :NB=\E[0;1;5m:NM=\E[0;1m:NR=\E[0;1;7m:NS=\E[0;1;5;7m: -- esr) 12654cit101e|C. Itoh CIT-101e, 12655 OTbs, OTpt, am, mir, msgr, 12656 cols#80, it#8, lines#24, 12657 acsc=, clear=\E[H\E[J, cnorm=, csr=\E[%i%p1%2d;%p2%2dr, 12658 cub1=\E[D, cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, 12659 cuu1=\E[A, cvvis=\E[?1l\E[?4l\E[?7h, dch1=\E[P, dl1=\E[M, 12660 ed=\E[J, el=\E[K, if=/usr/share/tabset/vt100, il1=\E[L, 12661 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOT, 12662 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOm, kf6=\EOl, 12663 kf7=\EOM, kf8=\EOn, rc=\E8, ri=\EM, rmacs=^O, rmir=\E[4l, 12664 rmkx=\E>, rmso=\E[m, rmul=\E[m, sc=\E7, smacs=^N, smir=\E[4h, 12665 smkx=\E=, smso=\E[7m, smul=\E[4m, 12666# From: David S. Lawyer, June 1997: 12667# The CIT 101-e was made in Japan in 1983-4 and imported by CIE 12668# Terminals in Irvine, CA. It was part of CITOH Electronics. In the 12669# late 1980's CIT Terminals went out of business. 12670# There is no need to use the initialization string is=... (by invoking 12671# tset or setterm etc.) provided that the terminal has been manually set 12672# up (and the setup saved with ^S) to be compatible with this termcap. To be 12673# compatible it should be in ANSI mode (not VT52). A set-up that 12674# works is to set all the manually setable stuff to factory defaults 12675# by pressing ^D in set-up mode. Then increse the brighness with the 12676# up-arrow key since the factory default will likely be dim on an old 12677# terminal. Then change any options you want (provided that they are 12678# compatible with the termcap). For my terminal I set: Screen 12679# Background: light; Keyclicks: silent; Auto wraparound: on; CRT saver: 12680# on. I also set up mine for parity (but you may not need it). Then 12681# save the setup with ^S. 12682# (cit101e-rv: added empty <rmcup> to suppress a tic warning. --esr) 12683cit101e-rv|Citoh CIT-101e (sets reverse video), 12684 am, eo, mir, msgr, xenl, xon, 12685 cols#80, it#8, lines#24, 12686 OTnl=\EM, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 12687 civis=\E[1v, clear=\E[H\E[J, cnorm=\E[0;3;4v, cr=^M, 12688 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 12689 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 12690 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 12691 cvvis=\E[3;5v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 12692 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l\E[?5h$<200/>, 12693 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 12694 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, 12695 is2=\E<\E>\E[?1l\E[?3l\E[?4l\E[?5h\E[?7h\E[?8h\E[3g\E[>5g\E(B\E[m\E[20l\E[1;24r\E[24;1H, 12696 kbs=\177, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 12697 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, nel=\EE, rc=\E8, 12698 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=, rmir=\E[4l, 12699 rmso=\E[m, rmul=\E[m, rs1=\Ec\E[?7h\E[>5g, sc=\E7, 12700 sgr0=\E[m, smcup=\E[>5g\E[?7h\E[?5h, smir=\E[4h, 12701 smso=\E[7m, smul=\E[4m, tbc=\E[3g, u6=\E[%i%p1%d;%p2%dR, 12702 u7=\E[6n, u8=\E[?6c, u9=\E[c, 12703cit101e-n|CIT-101e w/o am, 12704 am@, 12705 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, 12706 use=cit101e, 12707cit101e-132|CIT-101e with 132 cols, 12708 cols#132, 12709 kbs=^H, kcub1=^H, kcud1=^J, use=cit101e, 12710cit101e-n132|CIT-101e with 132 cols w/o am, 12711 am@, 12712 cols#132, 12713 cvvis=\E[?1l\E[?4l\E[?7l, kbs=^H, kcub1=^H, kcud1=^J, 12714 use=cit101e, 12715# CIE Terminals CIT-500 from BRL 12716# The following SET-UP modes are assumed for normal operation: 12717# GENERATE_XON/XOFF:YES DUPLEX:FULL NEWLINE:OFF 12718# AUTOWRAP:ON MODE:ANSI SCREEN_LENGTH:64_LINES 12719# DSPLY_CNTRL_CODES?NO PAGE_WIDTH:80 EDIT_MODE:OFF 12720# Other SET-UP modes may be set for operator convenience or communication 12721# requirements. 12722# Hardware tabs are assumed to be set every 8 columns; they can be set up 12723# by the "reset", "tset", or "tabs" utilities. No delays are specified; use 12724# "stty ixon -ixany" to enable DC3/DC1 flow control! 12725# (cit500: I added <rmam>/<smam> based on the init string -- esr) 12726cit500|CIE Terminals CIT-500, 12727 OTbs, OTpt, mir, msgr, xon, 12728 OTkn#10, cols#80, it#8, lines#64, vt#3, 12729 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 12730 clear=\E[H\E[J, cr=^M, csr=\E[%i%p1%d;%p2%dr, 12731 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 12732 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 12733 cuu=\E[%p1%dA, cuu1=\EM, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 12734 ed=\EJ, el=\EK, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, 12735 il1=\E[L, ind=^J, is2=\E<\E)0, kbs=^H, kcbt=\E[Z, kcub1=\EOD, 12736 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kdch1=\E[P, kdl1=\E[M, 12737 ked=\EJ, kel=\EK, kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, 12738 kf4=\EOU, kf5=\EOV, kf6=\EOW, kf7=\EOX, kf8=\EOY, kf9=\EOZ, 12739 khome=\E[H, kich1=\E[4h, kil1=\E[L, krmir=\E[4l, lf0=PF1, 12740 lf1=PF2, lf2=PF3, lf3=PF4, lf4=F15, lf5=F16, lf6=F17, lf7=F18, 12741 lf8=F19, lf9=F20, ll=\E[64H, nel=\EE, rc=\E8, rev=\E[7m, 12742 ri=\EM, rmacs=^O, rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, 12743 rmso=\E[m, rmul=\E[m, 12744 rs1=\E<\E2\E[20l\E[?6l\E[r\E[m\E[q\E(B\017\E)0\E>, 12745 sc=\E7, sgr0=\E[m, smacs=^N, smam=\E[?7h, smir=\E[4h, 12746 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 12747 12748# C. Itoh printers begin here 12749citoh|ci8510|8510|c.itoh 8510a, 12750 cols#80, it#8, 12751 bold=\E!, cub1@, 12752 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073., 12753 rep=\ER%p2%03d%p1%c, ri=\Er, rmul=\EY, sgr0=\E"\EY, 12754 smul=\EX, use=lpr, 12755citoh-pica|citoh in pica, 12756 is1=\EN, use=citoh, 12757citoh-elite|citoh in elite, 12758 cols#96, 12759 is1=\EE, 12760 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089., 12761 use=citoh, 12762citoh-comp|citoh in compressed, 12763 cols#136, 12764 is1=\EQ, 12765 is2=\E(009\,017\,025\,033\,041\,049\,057\,065\,073\,081\,089\,097\,105\,113\,121\,129., 12766 use=citoh, 12767# citoh has infinite cols because we don't want lp ever inserting \n\t**. 12768citoh-prop|citoh-ps|ips|citoh in proportional spacing mode, 12769 cols#32767, 12770 is1=\EP, use=citoh, 12771citoh-6lpi|citoh in 6 lines per inch mode, 12772 is3=\EA, use=citoh, 12773citoh-8lpi|citoh in 8 lines per inch mode, 12774 lines#88, 12775 is3=\EB, use=citoh, 12776 12777#### Control Data (cdc) 12778# 12779 12780cdc456|cdc 456 terminal, 12781 OTbs, am, 12782 cols#80, lines#24, 12783 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 12784 cup=\E1%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dl1=\EJ, ed=^X, 12785 el=^V, home=^Y, il1=\EL, ind=^J, 12786 12787# Assorted CDC terminals from BRL (improvements by DAG & Ferd Brundick) 12788cdc721|CDC Viking, 12789 OTbs, am, 12790 cols#80, lines#24, 12791 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, 12792 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, 12793 kcuu1=^W, khome=^Y, 12794cdc721ll|CDC Vikingll, 12795 OTbs, am, 12796 cols#132, lines#24, 12797 clear=^L, cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, 12798 cuu1=^W, el=^K, home=^Y, kcub1=^H, kcud1=^J, kcuf1=^I, 12799 kcuu1=^W, khome=^Y, 12800# (cdc752: the BRL entry had :ll=\E1 ^Z: commented out 12801cdc752|CDC 752, 12802 OTbs, am, bw, xhp, 12803 cols#80, lines#24, 12804 bel=^G, clear=\030\E1\s\s, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 12805 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, el=^V, 12806 home=\E1\s\s, ind=^J, ll=^Y, rs1=\E1 \030\002\003\017, 12807# CDC 756 12808# The following switch/key settings are assumed for normal operation: 12809# 96 chars SCROLL FULL duplex not BLOCK 12810# Other switches may be set according to communication requirements. 12811# Insert/delete-character cannot be used, as the whole display is affected. 12812# "so" & "se" are commented out until jove handles "sg" correctly. 12813cdc756|CDC 756, 12814 OTbs, am, bw, 12815 OTkn#10, cols#80, lines#24, 12816 bel=^G, clear=^Y^X, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 12817 cup=\E1%p2%{32}%+%c%p1%{32}%+%c, cuu1=^Z, 12818 dl1=\EJ$<6*/>, ed=^X, el=^V, home=^Y, il1=\EL$<6*/>, ind=^J, 12819 kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, kdch1=\EI, 12820 kdl1=\EL, ked=^X, kel=^V, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, 12821 kf4=\EE, kf5=\EF, kf6=\EG, kf7=\EH, kf8=\Ea, kf9=\Eb, khome=^Y, 12822 khts=^O, kich1=\EK, kil1=\EL, lf0=F1, lf1=F2, lf2=F3, lf3=F4, 12823 lf4=F5, lf5=F6, lf6=F7, lf7=F8, lf8=F9, lf9=F10, ll=^Y^Z, 12824 rs1=\031\030\002\003\017, 12825# 12826# CDC 721 from Robert Viduya, Ga. Tech. <ihnp4!gatech!gitpyr!robert> via BRL. 12827# 12828# Part of the long initialization string defines the "DOWN" key to the left 12829# of the tab key to send an ESC. The real ESC key is positioned way out 12830# in right field. 12831# 12832# The termcap won't work in 132 column mode due to the way it it moves the 12833# cursor. Termcap doesn't have the capability (as far as I could tell) to 12834# handle the 721 in 132 column mode. 12835# 12836# (cdc721: changed :ri: to :sr: -- esr) 12837cdc721-esc|Control Data 721, 12838 OTbs, OTpt, am, bw, msgr, xon, 12839 OTkn#10, cols#80, it#8, lines#30, 12840 bel=^G, blink=^N, cbt=^^^K, clear=^L, cub1=^H, cud1=^Z, 12841 cuf1=^X, cup=\002%p2%{32}%+%c%p1%{32}%+%c, cuu1=^W, 12842 dch1=^^N, dim=^\, dl1=^^Q, ed=^^P, el=^K, home=^Y, hts=^^^RW, 12843 ich1=^^O, il1=^^R, ind=\036W =\036U, invis=^^^R[, 12844 is2=\036\022B\003\036\035\017\022\025\035\036E\036\022H\036\022J\036\022L\036\022N\036\022P\036\022Q\036\022\036\022\^\036\022b\036\022i\036W =\036\022Z\036\011C1-` `!k/o, 12845 kbs=^H, kcub1=^H, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^q, 12846 kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, kf6=^^w, kf7=^^x, 12847 kf8=^^y, kf9=^^z, khome=^Y, ll=^B =, rev=^^D, 12848 ri=\036W =\036V, rmir=, rmkx=^^^Rl, rmso=^^E, rmul=^], 12849 sgr0=\017\025\035\036E\036\022\\, smir=, smkx=^^^Rk, 12850 smso=^^D, smul=^\, tbc=^^^RY, 12851 12852#### Getronics 12853# 12854# Getronics is a Dutch electronics company that at one time was called 12855# `Geveke' and made async terminals; but (according to the company itself!) 12856# they've lost all their documentation on the command set. The hardware 12857# documentation suggests the terminals were actually manufactured by a 12858# Taiwanese electronics company named Cal-Comp. There are known 12859# to have been at least two models, the 33 and the 50. 12860# 12861 12862# The 50 seems to be a top end vt220 clone, with the addition of a higher 12863# screen resolution, a larger screen, at least 1 page of memory above and 12864# below the screen, apparently pages of memory right and left of the screen 12865# which can be panned, and about 75 function keys (15 function keys x normal, 12866# shift, control, func A, func B). It also has more setup possibilities than 12867# the vt220. The monitor case is dated November 1978 and the keyboard case is 12868# May 1982. 12869# 12870# The vt100 emulation works as is. The entry below describes the rather 12871# non-conformant (but more featureful) ANSI mode. 12872# 12873# From: Stephen Peterson <stv@utrecht.ow.nl>, 27 May 1995 12874visa50|geveke visa 50 terminal in ansi 80 character mode, 12875 bw, mir, msgr, 12876 cols#80, lines#25, 12877 acsc=0_aaffggh jjkkllmmnnooqqssttuuvvwwxx, bel=^G, 12878 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, 12879 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 12880 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 12881 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 12882 dch=\E[%p1%dX, dch1=\E[X, dim=\E[2m, dl=\E[%p1%dM, 12883 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5h\E[?5l, home=\E[H, 12884 hpa=\E[%i%p1%dG, ht=^I, ich=\E[%p1%d@, ich1=\E[@, 12885 il=\E[%p1%dL, il1=\E[L, ind=^J, invis=\E[8m, 12886 is2=\E0;2m\E[1;25r\E[25;1H\E[?3l\E[?7h\E[?8h, 12887 ka1=\E[f, ka3=\EOQ, kb2=\EOP, kbs=^H, kc1=\EOR, kc3=\EOS, 12888 kcub1=\E[D, kcud1=\E[A, kcuf1=\E[C, kcuu1=\E[A, kdch1=\177, 12889 kdl1=\EOS, kf0=\E010, kf1=\E001, kf10=\E011, kf2=\E002, 12890 kf3=\E003, kf4=\E004, kf5=\E005, kf6=\E006, kf7=\E007, 12891 kf8=\E008, kf9=\E009, khome=\E[f, lf2=A delete char, 12892 lf3=A insert line, lf4=A delete line, lf5=A clear, 12893 lf6=A ce of/cf gn, lf7=A print, lf8=A on-line, 12894 lf9=A funcl0=A send, nel=^M^J, rev=\E[7m, rmacs=\E[3l, 12895 rmam=\E[?7l, rmir=\E[4l, rmkx=\E>, rmso=\E[0;2m, 12896 rmul=\E[0m, sgr0=\E[0;2m, smacs=\E3h, smam=\E?7h, 12897 smir=\E[4h, smkx=\E=, smso=\E[2;7m, smul=\E[4m, tbc=\E[3g, 12898 vpa=\E[%i%p1%dd, 12899 12900#### Human Designed Systems (Concept) 12901# 12902# Human Designed Systems 12903# 400 Fehley Drive 12904# King of Prussia, PA 19406 12905# Vox: (610)-277-8300 12906# Fax: (610)-275-5739 12907# Net: support@hds.com 12908# 12909# John Martin <john@hds.com> is their termcap expert. They're mostly out of 12910# the character-terminal business now (1995) and making X terminals. In 12911# particular, the whole `Concept' line described here was discontinued long 12912# ago. 12913# 12914 12915# From: <vax135!hpk> Sat Jun 27 07:41:20 1981 12916# Extensive changes to c108 by arpavax:eric Feb 1982 12917# Some unknown person at SCO then translated it to terminfo. 12918# 12919# There seem to be a number of different versions of the C108 PROMS 12920# (with bug fixes in its Z-80 program). 12921# 12922# The first one that we had would lock out the keyboard of you 12923# sent lots of short lines (like /usr/dict/words) at 9600 baud. 12924# Try that on your C108 and see if it sends a ^S when you type it. 12925# If so, you have an old version of the PROMs. 12926# 12927# You should configure the C108 to send ^S/^Q before running this. 12928# It is much faster (at 9600 baud) than the c100 because the delays 12929# are not fixed. 12930# new status line display entries for c108-8p: 12931# <is3> - init str #3 - setup term for status display - 12932# set programmer mode, select window 2, define window at last 12933# line of memory, set bkgnd stat mesg there, select window 0. 12934# 12935# <tsl> - to status line - select window 2, home cursor, erase to 12936# end-of-window, 1/2 bright on, goto(line#0, col#?) 12937# 12938# <fsl> - from status line - 1/2 bright off, select window 0 12939# 12940# <dsl> - disable status display - set bkgnd status mesg with 12941# illegal window # 12942# 12943# There are probably more function keys that should be added but 12944# I don't know what they are. 12945# 12946# No delays needed on c108 because of ^S/^Q handshaking 12947# 12948c108|concept108|c108-8p|concept108-8p|concept 108 w/8 pages, 12949 is3=\EU\E z"\Ev\001\177 !p\E ;"\E z \Ev \001\177p\Ep\n, 12950 rmcup=\Ev \001\177p\Ep\r\n, use=c108-4p, 12951c108-4p|concept108-4p|concept 108 w/4 pages, 12952 OTbs, eslok, hs, xon, 12953 pb@, 12954 acsc=jEkTl\\mMqLxU, cnorm=\Ew, cr=^M, 12955 cup=\Ea%p1%?%p1%{95}%>%t\001%{96}%-%;%{32}%+%c%p2%?%p2%{95}%>%t\001%{96}%-%;%{32}%+%c, 12956 cvvis=\EW, dch1=\E 1$<16*>, dsl=\E ;\177, fsl=\Ee\E z\s, 12957 ind=^J, is1=\EK\E!\E F, 12958 is3=\EU\E z"\Ev\177 !p\E ;"\E z \Ev \001 p\Ep\n, 12959 rmacs=\Ej\s, rmcup=\Ev \001 p\Ep\r\n, smacs=\Ej!, 12960 smcup=\EU\Ev 8p\Ep\r\E\025, 12961 tsl=\E z"\E?\E\005\EE\Ea %+\s, use=c100, 12962c108-rv|c108-rv-8p|concept 108 w/8 pages in reverse video, 12963 rmcup=\Ev \002 p\Ep\r\n, smcup=\EU\Ev 8p\Ep\r, 12964 use=c108-rv-4p, 12965c108-rv-4p|concept108rv4p|concept 108 w/4 pages in reverse video, 12966 flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, smso=\EE, 12967 use=c108-4p, 12968c108-w|c108-w-8p|concept108-w-8|concept108-w8p|concept 108 w/8 pages in wide mode, 12969 cols#132, 12970 is1=\E F\E", rmcup=\Ev ^A0\001D\Ep\r\n, 12971 smcup=\EU\Ev 8\001D\Ep\r, use=c108-8p, 12972 12973# Concept 100: 12974# These have only window relative cursor addressing, not screen 12975# relative. To get it to work right here, smcup/rmcup (which 12976# were invented for the concept) lock you into a one page 12977# window for screen style programs. 12978# 12979# To get out of the one page window, we use a clever trick: 12980# we set the window size to zero ("\Ev " in rmcup) which the 12981# terminal recognizes as an error and resets the window to all 12982# of memory. 12983# 12984# This trick works on c100 but does not on c108, sigh. 12985# 12986# Some tty drivers use cr3 for concept, others use nl3, hence 12987# the delays on cr and ind below. This padding is only needed at 12988# 9600 baud and up. One or the other is commented out depending on 12989# local conventions. 12990# 12991# 2 ms padding on <rmcup> isn't always enough. 6 works fine. Maybe 12992# less than 6 but more than 2 will work. 12993# 12994# Note: can't use function keys f7-f10 because they are 12995# indistinguishable from arrow keys (!), also, del char and 12996# clear eol use xon/xoff so they probably won't work very well. 12997# 12998# Also note that we don't define insrt/del char/delline/eop/send 12999# because they don't transmit unless we reset them - I figured 13000# it was a bad idea to clobber their definitions. 13001# 13002# The <mc5> sequence changes the escape character to ^^ so that 13003# escapes will be passed through to the printer. Only trouble 13004# is that ^^ won't be - ^^ was chosen to be unlikely. 13005# Unfortunately, if you're sending raster bits through to be 13006# plotted, any character you choose will be likely, so we lose. 13007# 13008# \EQ"\EY(^W (send anything from printer to host, for xon/xoff) 13009# cannot be # in is2 because it will hang a c100 with no printer 13010# if sent twice. 13011c100|concept100|concept|c104|c100-4p|hds concept 100, 13012 OTbs, am, eo, mir, ul, xenl, 13013 cols#80, lines#24, pb#9600, vt#8, 13014 bel=^G, blink=\EC, clear=\E?\E\005$<2*>, cr=$<9>\r, 13015 cub1=^H, cud1=^J, cuf1=\E=, 13016 cup=\Ea%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E;, 13017 dch1=\E\021$<16*>, dim=\EE, dl1=\E\002$<3*>, 13018 ed=\E\005$<16*>, el=\E\025$<16>, flash=\Ek$<200>\EK, 13019 ht=\011$<8>, il1=\E\022$<3*>, ind=^J, invis=\EH, ip=$<16*>, 13020 is1=\EK, 13021 is2=\EU\Ef\E7\E5\E8\El\ENH\E\0\Eo&\0\Eo'\E\Eo!\0\E\007!\E\010A@ \E4#\:"\E\:a\E4#;"\E\:b\E4#<"\E\:c, 13022 is3=\Ev $<6>\Ep\n, kbs=^H, kcbt=\E', kctab=\E_, 13023 kcub1=\E>, kcud1=\E<, kcuf1=\E=, kcuu1=\E;, kdch1=\E^Q, 13024 kdl1=\E^B, ked=\E^C, kel=\E^S, kf1=\E5, kf2=\E6, kf3=\E7, 13025 kf4=\E8, kf5=\E9, kf6=\E\:a, kf7=\E\:b, kf8=\E\:c, khome=\E?, 13026 khts=\E], kich1=\E^P, kil1=\E^R, kind=\E[, knp=\E-, kpp=\E., 13027 kri=\E\\, krmir=\E\0, mc4=\036o \E\EQ!\EYP\027, 13028 mc5=\EQ"\EY(\027\EYD\Eo \036, prot=\EI, 13029 rep=\Er%p1%c%p2%{32}%+%c$<.2*>, rev=\ED, 13030 rmcup=\Ev $<6>\Ep\r\n, rmir=\E\s\s, rmkx=\Ex, 13031 rmso=\Ed, rmul=\Eg, sgr0=\EN@, 13032 smcup=\EU\Ev 8p\Ep\r\E\025$<16>, smir=\E^P, smkx=\EX, 13033 smso=\ED, smul=\EG, 13034c100-rv|c100-rv-4p|concept100-rv|c100 rev video, 13035 cnorm@, cvvis@, flash=\EK$<200>\Ek, is1=\Ek, rmso=\Ee, 13036 smso=\EE, use=c100, 13037oc100|oconcept|c100-1p|old 1 page concept 100, 13038 in, 13039 is3@, use=c100, 13040 13041# From: Walter Skorski <walt@genetics1.JMP.TJU.EDU>, 16-oct-1996. 13042# Lots of notes, originally inline, but ncurses doesn't grok that. 13043# 13044# am: not available in power on mode, but turned on with \E[=107;207h in 13045# is2=. Also, \E=124l in is2= could have been used to prevent needing 13046# to specify xenl:, but that would have rendered the last space on the 13047# last line useless. 13048# bw: Not available in power on mode, but turned on with \E[=107;207h in 13049# is2=. 13050# clear: Could be done with \E[2J alone, except that vi (and probably most 13051# other programs) assume that this also homes the cursor. 13052# dsl: Go to window 2, go to the beginning of the line, use a line feed to 13053# scroll the window, and go back to window 1. 13054# is2: the string may cause a warning to be issued by tic that it 13055# found a very long line and that it suspects that a comma is missing 13056# somewhere. This warning can be ignored (unless it comes up more than 13057# once). The initialization string contains the following commands: 13058# 13059# [Setup mode items changed from factory defaults:] 13060# \E)0 set alternate character set to 13061# graphics 13062# ^O set character set to default 13063# [In case it wasn't] 13064# \E[m turn off all attributes 13065# [In case they weren't off] 13066# \E[=107; cursor wrap and 13067# 207h character wrap on 13068# \E[90;3u set Fkey definitions to "transmit" 13069# defaults 13070# \E[92;3u set cursor key definitions to 13071# "transmit" defaults 13072# \E[43;1u set shift F13 to transmit... 13073# \177\E$P\177 13074# \E[44;1u set shift F14 to transmit... 13075# \177\E$Q\177 13076# \E[45;1u set shift F15 to transmit... 13077# \177\E$R\177 13078# \E[46;1u set shift F16 to transmit... 13079# \177\E$S\177 13080# \E[200;1u set shift up to transmit... 13081# \177\E$A\177 13082# \E[201;1u set shift down to transmit... 13083# \177\E$B\177 13084# \E[202;1u set shift right to transmit... 13085# \177\E$C\177 13086# \E[203;1u set shift left to transmit... 13087# \177\E$D\177 13088# \E[204;1u set shift home to transmit... 13089# \177\E$H\177 13090# \E[212;1u set backtab to transmit... 13091# \177\E$I\177 13092# \E[213;1u set shift backspace to transmit... 13093# \177\E$^H\177 13094# \E[214;1u set shift del to transmit... 13095# "\E$\177" 13096# [Necessary items not mentioned in setup mode:] 13097# \E[2!w move to window 2 13098# \E[25;25w define window as line 25 of memory 13099# \E[!w move to window 1 13100# \E[2*w show current line of window 2 as 13101# status line 13102# \E[2+x set meta key to use high bit 13103# \E[;3+} move underline to bottom of character 13104# 13105# All Fkeys are set to their default transmit definitions with \E[90;3u 13106# in is2=. IMPORTANT: to use this terminal definition, the "quit" stty 13107# setting MUST be redefined or deactivated, because the default is 13108# contained in almost all of this terminal's Fkey strings! If for some 13109# reason "quit" cannot be altered, the Fkeys can, but it would be 13110# necessary to change ^| to ^] in all of these definitions, and add 13111# \E[2;029!t to is2. 13112# lines: is set to 24 because this terminal refuses to treat the 25th 13113# line normally. 13114# ll: Not available in power on mode, but turned on with \E[=107;207h in 13115# is2=. 13116# lm: Pointless, given that this definition locks a single screen of 13117# memory into view, but what the hey... 13118# rmso: Could use \E[1;7!{ to turn off only bold and reverse (leaving any 13119# other attributes alone), but some programs expect this to turn off 13120# everything. 13121# rmul: Could use \E[4!{ to turn off only underline (leaving any other 13122# attributes alone), but some programs expect this to turn off 13123# everything. 13124# sgr: Attributes are set on this terminal with the string \E[ followed by 13125# a list of attribute code numbers (in decimal, separated by 13126# semicolons), followed by the character m. The attribute code 13127# numbers are: 13128# 1 for bold; 13129# 2 for dim (which is ignored in power on mode); 13130# 4 for underline; 13131# 5 for blinking; 13132# 7 for inverse; 13133# 8 for not displayable; and 13134# =99 for protected (except that there are strange side 13135# effects to protected characters which make them inadvisable). 13136# The mapping of terminfo parameters to attributes is as follows: 13137# %p1 (standout) = bold and inverse together; 13138# %p2 (underline) = underline; 13139# %p3 (reverse) = inverse; 13140# %p4 (blink) = blinking; 13141# %p5 (dim) is ignored; 13142# %p6 (bold) = bold; 13143# %p7 (invisible) = not displayable; 13144# %p8 (protected) is ignored; and 13145# %p9 (alt char set) = alt char set. 13146# The code to do this is: 13147# \E[0 OUTPUT \E[0 13148# %?%p1%p6%O IF (standout; bold) OR 13149# %t;1 THEN OUTPUT ;1 13150# %; ENDIF 13151# %?%p2 IF underline 13152# %t;4 THEN OUTPUT ;4 13153# %; ENDIF 13154# %?%p4 IF blink 13155# %t;5 THEN OUTPUT ;5 13156# %; ENDIF 13157# %?%p1%p3%O IF (standout; reverse) OR 13158# %t;7 THEN OUTPUT ;7 13159# %; ENDIF 13160# %?%p7 IF invisible 13161# %t;8 THEN OUTPUT ;8 13162# %; ENDIF 13163# m OUTPUT m 13164# %?%p9 IF altcharset 13165# %t^N THEN OUTPUT ^N 13166# %e^O ELSE OUTPUT ^O 13167# %; ENDIF 13168# sgr0: Everything is turned off (including alternate character set), since 13169# there is no way of knowing what it is that the program wants turned 13170# off. 13171# smul: The "underline" attribute is reconfigurable to an overline or 13172# strikethru, or (as done with \E[;3+} in is2=), to a line at the true 13173# bottom of the character cell. This was done to allow for more readable 13174# underlined characters, and to be able to distinguish between an 13175# underlined space, an underscore, and an underlined underscore. 13176# xenl: Terminal can be configured to not need this, but this "glitch" 13177# behavior is actually preferable with autowrap terminals. 13178# 13179# Parameters kf31= thru kf53= actually contain the strings sent by the shifted 13180# Fkeys. There are no parameters for shifted Fkeys in terminfo. The is2 13181# string modifies the 'O' in kf43 to kf46 to a '$'. 13182# 13183# kcbt was originally ^I but redefined in is2=. 13184# kHOM was \E[H originally but redefined in is2=, as were a number of 13185# other keys. 13186# kDC was originally \177 but redefined in is2=. 13187# 13188# kbs: Shift was also ^H originally but redefined as \E$^H in is2=. 13189# tsl: Go to window 2, then do an hpa=. 13190# 13191#------- flash=\E[8;3!}^G\E[3;3!} 13192#------- flash=\E[?5h$<100>\E[?5l 13193# There are two ways to flash the screen, both of which have their drawbacks. 13194# The first is to set the bell mode to video, transmit a bell character, and 13195# set the bell mode back - but to what? There is no way of knowing what the 13196# user's old bell setting was before we messed with it. Worse, the command to 13197# set the bell mode also sets the key click volume, and there is no way to say 13198# "leave that alone", or to know what it's set to, either. 13199# The second way to do a flash is to set the screen to inverse video, pad for a 13200# tenth of a second, and set it back - but like before, there's no way to know 13201# that the screen wasn't ALREADY in inverse video, or that the user may prefer 13202# it that way. The point is moot anyway, since vi (and probably other 13203# programs) assume that by defining flash=, you want the computer to use it 13204# INSTEAD of bel=, rather than as a secondary type of signal. 13205# 13206#------- cvvis=\E[+{ 13207# The is the power on setting, which is also as visible as the cursor 13208# gets. 13209#------- wind=\E[%i%p1%d;%p2%d;%p3%{1}%+%d;%p4%{1}%+%dw 13210# Windowing is possible, but not defined here because it is also used to 13211# emulate status line functions. Allowing a program to set a window could 13212# clobber the status line or render it unusable. There is additional memory, 13213# but screen scroll functions are destructive and do not make use of it. 13214# 13215#------- dim= Not available in power on mode. 13216# You have a choice of defining low intensity characters as "half bright" and 13217# high intensity as "normal", or defining low as "normal" and high as "bold". 13218# No matter which you choose, only one of either "half bright" or "bold" is 13219# available at any time, so taking the time to override the default is 13220# pointless. 13221# 13222#------- prot=\E[=0;99m 13223# Not defined, because it appears to have some strange side effects. 13224#------- pfkey=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; 13225#------- pfloc=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%du\177%p2%s\177%; 13226#------- pfx=%?%p1%{24}%<%p1%{30}%>%p1%{54}%<%A%O%t\E[%p1%d;1u\177%p2%s\177%; 13227# Available, but making them available to programs is inadvisable. 13228# The code to do this is: 13229# %?%p1%{24}%< IF ((key; 24) <; 13230# %p1%{30}%> ((key; 30) >; 13231# %p1%{54}%< (key; 54) < 13232# %A ) AND 13233# %O ) OR 13234# [that is, "IF key < 24 OR (key > 30 AND key < 54)",] 13235# %t\E[ THEN OUTPUT \E[ 13236# %p1%d OUTPUT (key) as decimal 13237# [next line applies to pfx only] 13238# ;1 OUTPUT ;1 13239# u OUTPUT u 13240# \177 OUTPUT \177 13241# %p2%s OUTPUT (string) as string 13242# \177 OUTPUT \177 13243# [DEL chosen as delimiter, but could be any character] 13244# [implied: ELSE do nothing] 13245# %; ENDIF 13246# 13247#------- rs2= 13248# Not defined since anything it might do could be done faster and easier with 13249# either Meta-Shift-Reset or the main power switch. 13250# 13251#------- smkx=\E[1!z 13252#------- rmkx=\E[!z 13253# These sequences apply to the cursor and setup keys only, not to the 13254# numeric keypad. But it doesn't matter anyway, since making these 13255# available to programs is inadvisable. 13256# For the key definitions below, all sequences beginning with \E$ are 13257# custom and programmed into the terminal via is2. \E$ also has no 13258# meaning to any other terminal. 13259# 13260#------- cmdch=\E[;%p1%d!t 13261# Available, but making it available to programs is inadvisable. 13262#------- smxon=\E[1*q 13263# Available, but making it available to programs is inadvisable. 13264# Terminal will send XON/XOFF on buffer overflow. 13265#------- rmxon=\E[*q 13266# Available, but making it available to programs is inadvisable. 13267# Terminal will not notify on buffer overflow. 13268#------- smm=\E[2+x 13269#------- rmm=\E[+x 13270# Available, but making them available to programs is inadvisable. 13271# 13272# Printing: 13273# It's not made clear in the manuals, but based on other ansi/vt type 13274# terminals, it's a good guess that this terminal is capable of both 13275# "transparent print" (which doesn't copy data to the screen, and 13276# therefore needs mc5i: specified to say so) and "auxilliary print" 13277# (which does duplicate printed data on the screen, in which case mc4= 13278# and mc5= should use the \E[?4i and \E[?5i strings instead). 13279 13280hds200|Human Designed Systems HDS200, 13281 am, bw, eslok, hs, km, mir, msgr, xenl, xon, 13282 cols#80, it#8, lines#24, lm#0, 13283 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 13284 blink=\E[0;5m, bold=\E[0;1m, cbt=\E[Z, civis=\E[6+{, 13285 clear=\E[H\E[J, cnorm=\E[+{, cr=^M, 13286 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 13287 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 13288 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 13289 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 13290 dsl=\E[2!w\r\n\E[!w, ed=\E[J, el=\E[K, el1=\E[1K, 13291 fsl=\E[!w, home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, 13292 ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 13293 invis=\E[0;8m, 13294 is2=\E)0\017\E[m\E[=107;207h\E[90;3u\E[92;3u\E[43;1u\177\E$P\177\E[44;1u\177\E$Q\177\E[45;1u\177\E$R\177\E[46;1u\177\E$S\177\E[200;1u\177\E$A\177\E[201;1u\177\E$B\177\E[202;1u\177\E$C\177\E[203;1u\177\E$D\177\E[204;1u\177\E$H\177\E[212;1u\177\E$I\177\E[213;1u\177\E$\010\177\E[214;1u"\E$\177"\E[2!w\E[25;25w\E[!w\E[2*w\E[2+x\E[;3+}, 13295 kDC=\E$\177, kHOM=\E$H, kLFT=\E$D, kRIT=\E$C, kbs=^H, 13296 kcbt=\E$I, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 13297 kdch1=\177, kent=^M, kf1=^\001\r, kf10=^\010\r, 13298 kf11=^\011\r, kf12=^\012\r, kf13=\EOP, kf14=\EOQ, 13299 kf15=\EOR, kf16=\EOS, kf17=^\017\r, kf18=^\018\r, 13300 kf19=^\019\r, kf2=^\002\r, kf20=^\020\r, kf21=^\021\r, 13301 kf22=^\022\r, kf23=^\023\r, kf3=^\003\r, kf31=^\031\r, 13302 kf32=^\032\r, kf33=^\033\r, kf34=^\034\r, kf35=^\035\r, 13303 kf36=^\036\r, kf37=^\037\r, kf38=^\038\r, kf39=^\039\r, 13304 kf4=^\004\r, kf40=^\040\r, kf41=^\041\r, kf42=^\042\r, 13305 kf43=\E$P, kf44=\E$Q, kf45=\E$R, kf46=\E$S, kf47=^\047\r, 13306 kf48=^\048\r, kf49=^\049\r, kf5=^\005\r, kf50=^\050\r, 13307 kf51=^\051\r, kf52=^\052\r, kf53=^\053\r, kf6=^\006\r, 13308 kf7=^\007\r, kf8=^\008\r, kf9=^\009\r, khome=\E[H, 13309 kind=\E[T, knp=\E[U, kpp=\E[V, kri=\E[S, ll=\E[H\E[A, 13310 nel=\E[E, rc=\E8, rev=\E[0;7m, ri=\EM, rmacs=^O, rmir=\E[4l, 13311 rmso=\E[m\017, rmul=\E[m\017, sc=\E7, 13312 sgr=\E[0%?%p1%p6%O%t;1%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%O%t;7%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 13313 sgr0=\E[m\017, smacs=^N, smir=\E[4h, smso=\E[0;1;7m, 13314 smul=\E[0;4m, tbc=\E[3g, tsl=\E[2!w\E[%i%p1%dG, 13315 vpa=\E[%i%p1%dd, use=ansi+pp, 13316 13317# <ht> through <el> included to specify padding needed in raw mode. 13318# (avt-ns: added empty <acsc> to suppress a tic warning --esr) 13319avt-ns|concept avt no status line, 13320 OTbs, am, eo, mir, ul, xenl, xon, 13321 cols#80, it#8, lines#24, lm#192, 13322 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 13323 clear=\E[H\E[J$<38>, cnorm=\E[=119l, cr=^M, 13324 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 13325 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 13326 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 13327 cvvis=\E[=119h, dch1=\E[P, dim=\E[1!{, dl=\E[%p1%dM$<4*>, 13328 dl1=\E[M$<4>, ed=\E[J$<96>, el=\E[K$<6>, home=\E[H, 13329 hpa=\E[%p1%{1}%+%dG, ht=\011$<4>, hts=\EH, ich=\E[%p1%d@, 13330 ich1=\E[@, il=\E[%p1%dL$<4*>, il1=\E[L$<4>, ind=\n$<8>, 13331 invis=\E[8m, ip=$<4>, is1=\E[=103l\E[=205l, 13332 is2=\E[1*q\E[2!t\E[7!t\E[=4;101;119;122l\E[=107;118;207h\E)1\E[1Q\EW\E[!y\E[!z\E>\E[0\:0\:32!r\E[0*w\E[w\E2\r\n\E[2;27!t, 13333 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 13334 kdch1=\E^B\r, ked=\E^D\r, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 13335 kf4=\EOS, khome=\E[H, kich1=\E^A\r, kil1=\E^C\r, ll=\E[24H, 13336 mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, 13337 pfloc=\E[%p1%d;0u#%p2%s#, pfx=\E[%p1%d;1u#%p2%s#, 13338 prot=\E[99m, rc=\E8, rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, 13339 ri=\EM$<4>, rmacs=\016$<1>, rmcup=\E[w\E2\r\n, 13340 rmir=\E[4l, rmkx=\E[!z\E[0;2u, rmso=\E[7!{, rmul=\E[4!{, 13341 sc=\E7, 13342 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;%?%p8%t99;%;m%?%p5%t\E[1!{%;%?%p9%t\017%e\016%;$<1>, 13343 sgr0=\E[m\016$<1>, smacs=\017$<1>, 13344 smcup=\E[=4l\E[1;24w\E2\r, smir=\E[4h, 13345 smkx=\E[1!z\E[0;3u, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 13346 vpa=\E[%p1%{1}%+%dd, 13347avt-rv-ns|concept avt in reverse video mode/no status line, 13348 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, 13349 use=avt-ns, 13350avt-w-ns|concept avt in 132 column mode/no status line, 13351 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, 13352 use=avt-ns, 13353avt-w-rv-ns|concept avt in 132 column mode/no status line/reverse video, 13354 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, 13355 smcup=\E[H\E[1;24;1;132w, use=avt-ns, 13356 13357# Concept AVT with status line. We get the status line using the 13358# "Background status line" feature of the terminal. We swipe the 13359# first line of memory in window 2 for the status line, keeping 13360# 191 lines of memory and 24 screen lines for regular use. 13361# The first line is used instead of the last so that this works 13362# on both 4 and 8 page AVTs. (Note the lm#191 or 192 - this 13363# assumes an 8 page AVT but lm isn't currently used anywhere.) 13364# 13365avt+s|concept avt status line changes, 13366 eslok, hs, 13367 lm#191, 13368 dsl=\E[0*w, fsl=\E[1;1!w, 13369 is3=\E[2w\E[2!w\E[1;1;1;80w\E[H\E[2*w\E[1!w\E2\r\n, 13370 rmcup=\E[2w\E2\r\n, smcup=\E[2;25w\E2\r, 13371 tsl=\E[2;1!w\E[;%p1%dH\E[2K, 13372avt|avt-s|concept-avt|avt w/80 columns, 13373 use=avt+s, use=avt-ns, 13374avt-rv|avt-rv-s|avt reverse video w/sl, 13375 flash=\E[=205l$<200>\E[=205h, is1=\E[=103l\E[=205h, 13376 use=avt+s, use=avt-ns, 13377avt-w|avt-w-s|concept avt 132 cols+status, 13378 is1=\E[=103h\E[=205l, smcup=\E[H\E[1;24;1;132w, 13379 use=avt+s, use=avt-ns, 13380avt-w-rv|avt-w-rv-s|avt wide+status+rv, 13381 flash=\E[=205l$<200>\E[=205h, is1=\E[=103h\E[=205h, 13382 smcup=\E[H\E[1;24;1;132w, use=avt+s, use=avt-ns, 13383 13384#### Contel Business Systems. 13385# 13386 13387# Contel c300 and c320 terminals. 13388contel300|contel320|c300|Contel Business Systems C-300 or C-320, 13389 am, in, xon, 13390 cols#80, lines#24, xmc#1, 13391 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 13392 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 13393 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, 13394 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, 13395 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, 13396 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, 13397 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, 13398 rmso=\E!\0, sgr0=\E!\0, smso=\E!\r, tbc=\E3, 13399# Contel c301 and c321 terminals. 13400contel301|contel321|c301|c321|Contel Business Systems C-301 or C-321, 13401 flash@, ich1@, ip@, rmso=\E!\0$<20>, smso=\E!\r$<20>, 13402 use=contel300, 13403 13404#### Data General (dg) 13405# 13406# According to James Carlson <carlson@xylogics.com> writing in January 1995, 13407# the terminals group at Data General was shut down in 1991; all these 13408# terminals have thus been discontinued. 13409# 13410# DG terminals have function keys that respond to the SHIFT and CTRL keys, 13411# e.g., SHIFT-F1 generates a different code from F1. To number the keys 13412# sequentially, first the unmodified key codes are listed as F1 through F15. 13413# Then their SHIFT versions are listed as F16 through F30, their CTRL versions 13414# are listed as F31 through F45, and their CTRL-SHIFT versions are listed as 13415# F46 through F60. This is done in the private "includes" below whose names 13416# start with "dgkeys+". 13417# 13418# DG terminals generally support 8 bit characters. For each of these terminals 13419# two descriptions are supplied: 13420# 1) A default description for 8 bits/character communications, which 13421# uses the default DG international character set and keyboard codes. 13422# 2) A description with suffix "-7b" for 7 bits/character communications. 13423# This description must use the NON-DEFAULT native keyboard language. 13424 13425# Unmodified fkeys (kf1-kf11), Shift fkeys (kf12-kf22), Ctrl fkeys (kf23-kf33), 13426# Ctrl/Shift fdkeys (kf34-kf44). 13427 13428dgkeys+8b|Private entry describing DG terminal 8-bit ANSI mode special keys, 13429 ka1=\233020z, ka3=\233021z, kc1=\233022z, kc3=\233023z, 13430 kclr=\2332J, kcub1=\233D, kcud1=\233B, kcuf1=\233C, 13431 kcuu1=\233A, kel=\233K, kf1=\233001z, kf10=\233010z, 13432 kf11=\233011z, kf12=\233012z, kf13=\233013z, 13433 kf14=\233014z, kf15=\233000z, kf16=\233101z, 13434 kf17=\233102z, kf18=\233103z, kf19=\233104z, 13435 kf2=\233002z, kf20=\233105z, kf21=\233106z, 13436 kf22=\233107z, kf23=\233108z, kf24=\233109z, 13437 kf25=\233110z, kf26=\233111z, kf27=\233112z, 13438 kf28=\233113z, kf29=\233114z, kf3=\233003z, 13439 kf30=\233100z, kf31=\233201z, kf32=\233202z, 13440 kf33=\233203z, kf34=\233204z, kf35=\233205z, 13441 kf36=\233206z, kf37=\233207z, kf38=\233208z, 13442 kf39=\233209z, kf4=\233004z, kf40=\233210z, 13443 kf41=\233211z, kf42=\233212z, kf43=\233213z, 13444 kf44=\233214z, kf45=\233200z, kf46=\233301z, 13445 kf47=\233302z, kf48=\233303z, kf49=\233304z, 13446 kf5=\233005z, kf50=\233305z, kf51=\233306z, 13447 kf52=\233307z, kf53=\233308z, kf54=\233309z, 13448 kf55=\233310z, kf56=\233311z, kf57=\233312z, 13449 kf58=\233313z, kf59=\233314z, kf6=\233006z, 13450 kf60=\233300z, kf7=\233007z, kf8=\233008z, kf9=\233009z, 13451 khome=\233H, kprt=\233i, 13452 13453dgkeys+7b|Private entry describing DG terminal 7-bit ANSI mode special keys, 13454 ka1=\E[020z, ka3=\E[021z, kc1=\E[022z, kc3=\E[023z, 13455 kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 13456 kel=\E[K, kf1=\E[001z, kf10=\E[010z, kf11=\E[011z, 13457 kf12=\E[012z, kf13=\E[013z, kf14=\E[014z, kf15=\E[000z, 13458 kf16=\E[101z, kf17=\E[102z, kf18=\E[103z, kf19=\E[104z, 13459 kf2=\E[002z, kf20=\E[105z, kf21=\E[106z, kf22=\E[107z, 13460 kf23=\E[108z, kf24=\E[109z, kf25=\E[110z, kf26=\E[111z, 13461 kf27=\E[112z, kf28=\E[113z, kf29=\E[114z, kf3=\E[003z, 13462 kf30=\E[100z, kf31=\E[201z, kf32=\E[202z, kf33=\E[203z, 13463 kf34=\E[204z, kf35=\E[205z, kf36=\E[206z, kf37=\E[207z, 13464 kf38=\E[208z, kf39=\E[209z, kf4=\E[004z, kf40=\E[210z, 13465 kf41=\E[211z, kf42=\E[212z, kf43=\E[213z, kf44=\E[214z, 13466 kf45=\E[200z, kf46=\E[301z, kf47=\E[302z, kf48=\E[303z, 13467 kf49=\E[304z, kf5=\E[005z, kf50=\E[305z, kf51=\E[306z, 13468 kf52=\E[307z, kf53=\E[308z, kf54=\E[309z, kf55=\E[310z, 13469 kf56=\E[311z, kf57=\E[312z, kf58=\E[313z, kf59=\E[314z, 13470 kf6=\E[006z, kf60=\E[300z, kf7=\E[007z, kf8=\E[008z, 13471 kf9=\E[009z, khome=\E[H, kprt=\E[i, 13472 13473dgkeys+11|Private entry describing 11 minimal-subset DG mode special keys, 13474 kclr=^L, kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kel=^K, 13475 kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^a, kf13=^^b, kf14=^^c, 13476 kf15=^^d, kf16=^^e, kf17=^^f, kf18=^^g, kf19=^^h, kf2=^^r, 13477 kf20=^^i, kf21=^^j, kf22=^^k, kf23=^^1, kf24=^^2, kf25=^^3, 13478 kf26=^^4, kf27=^^5, kf28=^^6, kf29=^^7, kf3=^^s, kf30=^^8, 13479 kf31=^^9, kf32=^^\:, kf33=^^;, kf34=^^!, kf35=^^", kf36=^^#, 13480 kf37=^^$, kf38=^^%%, kf39=^^&, kf4=^^t, kf40=^^', kf41=^^(, 13481 kf42=^^), kf43=^^*, kf44=^^+, kf5=^^u, kf6=^^v, kf7=^^w, 13482 kf8=^^x, kf9=^^y, khome=^H, 13483 13484dgkeys+15|Private entry describing 15 DG mode special keys, 13485 kHOM=^^^H, kLFT=^^^Y, kRIT=^^^X, ka1=^^\\, ka3=^^], kc1=^^\^, 13486 kc3=^^_, kf1=^^q, kf10=^^z, kf11=^^{, kf12=^^|, kf13=^^}, 13487 kf14=^^~, kf15=^^p, kf16=^^a, kf17=^^b, kf18=^^c, kf19=^^d, 13488 kf2=^^r, kf20=^^e, kf21=^^f, kf22=^^g, kf23=^^h, kf24=^^i, 13489 kf25=^^j, kf26=^^k, kf27=^^l, kf28=^^m, kf29=^^n, kf3=^^s, 13490 kf30=^^`, kf31=^^1, kf32=^^2, kf33=^^3, kf34=^^4, kf35=^^5, 13491 kf36=^^6, kf37=^^7, kf38=^^8, kf39=^^9, kf4=^^t, kf40=^^\:, 13492 kf41=^^;, kf42=^^<, kf43=^^=, kf44=^^>, kf45=^^0, kf46=^^!, 13493 kf47=^^", kf48=^^#, kf49=^^$, kf5=^^u, kf50=^^%%, kf51=^^&, 13494 kf52=^^', kf53=^^(, kf54=^^), kf55=^^*, kf56=^^+, kf57=^^\,, 13495 kf58=^^-, kf59=^^., kf6=^^v, kf60=^^\s, kf7=^^w, kf8=^^x, 13496 kf9=^^y, 13497 13498# Data General color terminals use the "Tektronix" color model. The total 13499# number of colors varies with the terminal model, as does support for 13500# attributes used in conjunction with color. 13501 13502# Removed u7, u8 definitions since they conflict with tack: 13503# Preserve user-defined colors in at least some cases. 13504# u7=^^Fh, 13505# Default is ACM mode. 13506# u8=^^F}20^^Fi^^F}21, 13507# 13508dgunix+fixed|Fixed color info for DG D430C terminals in DG-UNIX mode, 13509 bce, 13510 colors#16, ncv#53, pairs#256, 13511 op=\036Ad\036Bd, 13512 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 13513 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 13514 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, 13515 13516dg+fixed|Fixed color info for DG D430C terminals in DG mode, 13517 use=dgunix+fixed, 13518 13519# Video attributes are coordinated using static variables set by "sgr", then 13520# checked by "op", "seta[bf]", and "set[bf]" to refresh the attribute settings. 13521# (D=dim, U=underline, B=blink, R=reverse.) 13522dg+color8|Color info for Data General D220 and D230C terminals in ANSI mode, 13523 bce, 13524 colors#8, ncv#16, pairs#64, 13525 op=\E[%?%gD%t2;%;%?%gU%t4;%;%?%gB%t5;%;%?%gR%t7;%;m, 13526 setab=\E[4%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 13527 setaf=\E[3%p1%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 13528 setb=\E[4%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 13529 setf=\E[3%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 13530 13531dg+color|Color info for Data General D470C terminals in ANSI mode, 13532 colors#16, ncv#53, pairs#256, 13533 setab=\E[%?%p1%{8}%<%t4%p1%e=%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 13534 setaf=\E[%?%p1%{8}%<%t3%p1%e<%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 13535 setb=\E[%?%p1%{8}%<%t4%e=%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 13536 setf=\E[%?%p1%{8}%<%t3%e<%;%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%d%?%gD%t;2%;%?%gU%t;4%;%?%gB%t;5%;%?%gR%t;7%;m, 13537 use=dg+color8, 13538 13539dgmode+color8|Color info for Data General D220/D230C terminals in DG mode, 13540 bce, 13541 colors#8, ncv#16, pairs#64, 13542 op=\036Ad\036Bd, 13543 setab=\036B%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, 13544 setaf=\036A%p1%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%{48}%+%c, 13545 setb=\036B%p1%{48}%+%c, setf=\036A%p1%{48}%+%c, 13546 13547dgmode+color|Color info for Data General D470C terminals in DG mode, 13548 colors#16, pairs#256, 13549 setab=\036B%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 13550 setaf=\036A%p1%?%p1%{8}%<%t%{2}%&%?%p1%{1}%&%t%{4}%|%;%?%p1%{4}%&%t%{1}%|%;%;%{48}%+%c, 13551 use=dgmode+color8, 13552 13553dgunix+ccc|Configurable color info for DG D430C terminals in DG-UNIX mode, 13554 bce, ccc, 13555 colors#52, ncv#53, pairs#26, 13556 initp=\036RG0%p1%02X%p2%{255}%*%{1000}%/%02X%p3%{255}%*%{1000}%/%02X%p4%{255}%*%{1000}%/%02X%p5%{255}%*%{1000}%/%02X%p6%{255}%*%{1000}%/%02X%p7%{255}%*%{1000}%/%02X, 13557 oc=\036RG01A00FF00000000\036RG01B00000000FF00\036RG01C007F00000000\036RG01D000000007F00, 13558 op=\036RF4831A\036RF2E31B\036RF1D31C\036RF3F31D, 13559 scp=\036RG2%p1%02X, 13560 13561# Colors are in the order: normal, reverse, dim, dim + reverse. 13562dg+ccc|Configurable color info for DG D430C terminals in DG mode, 13563 bce, ccc, 13564 colors#52, ncv#53, pairs#26, 13565 initp=\036RG0%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c%p2%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p3%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p4%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p5%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p6%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c%p7%{255}%*%{1000}%/%Pa%ga%{16}%/%{48}%+%c%ga%{16}%m%{48}%+%c, 13566 oc=\036RG01\:00??00000000\036RG01;00000000??00\036RG01<007?00000000\036RG01=000000007?00, 13567 op=\036RF4831\:\036RF2>31;\036RF1=31<\036RF3?31=, 13568 scp=\036RG2%p1%{16}%/%{48}%+%c%p1%{16}%m%{48}%+%c, 13569 13570# The generic DG terminal type (an 8-bit-clean subset of the 6053) 13571# Initialization string 1 sets: 13572# ^R - vertical scrolling enabled 13573# ^C - blinking enabled 13574dg-generic|Generic Data General terminal in DG mode, 13575 am, bw, msgr, xon, 13576 cols#80, lines#24, 13577 bel=^G, blink=^N, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, 13578 cup=\020%p2%c%p1%c, cuu1=^W, dim=^\, el=^K, ind=^J, is1=^R^C, 13579 mc0=^Q, nel=^J, rmso=^], rmul=^U, sgr0=^O^U^], smso=^\, 13580 smul=^T, use=dgkeys+11, 13581 13582# According to the 4.4BSD termcap file, the dg200 <cup> should be the 13583# termcap equivalent of \020%p2%{128}%+%c%p1%{128}%+%c (in termcap 13584# notation that's "^P%r%+\200%+\200"). Those \200s are suspicious, 13585# maybe they were originally nuls (which would fit). 13586 13587dg200|data general dasher 200, 13588 OTbs, am, bw, 13589 cols#80, lines#24, 13590 bel=^G, clear=^L, cr=^M, cub1=^Y, cud1=^Z, cuf1=^X, 13591 cup=\020%p2%c%p1%c, cuu1=^W, el=^K, home=^H, ind=^J, 13592 kcub1=^Y, kcud1=^Z, kcuf1=^X, kcuu1=^W, kf0=^^z, kf1=^^q, 13593 kf2=^^r, kf3=^^s, kf4=^^t, kf5=^^u, kf6=^^v, kf7=^^w, kf8=^^x, 13594 kf9=^^y, khome=^H, lf0=f10, nel=^J, rmso=^^E, rmul=^U, 13595 smso=^^D, smul=^T, 13596 13597# Data General 210/211 (and 410?) from Lee Pearson (umich!lp) via BRL 13598dg210|dg-ansi|Data General 210/211, 13599 am, 13600 cols#80, lines#24, 13601 OTnl=\E[B, clear=\E[2J, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 13602 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 13603 home=\E[H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 13604 khome=\E[H, nel=\r\E[H\E[A\n, rmso=\E[0;m, rmul=\E[0;m, 13605 smso=\E[7;m, smul=\E[4;m, 13606# From: Peter N. Wan <ihnp4!gatech!gacsr!wan> 13607# courtesy of Carlos Rucalde of Vantage Software, Inc. 13608# (dg211: this had <cup=\020%r%.%>., which was an ancient termcap hangover. 13609# I suspect the d200 function keys actually work on the dg211, check it out.) 13610dg211|Data General d211, 13611 cnorm=^L, cvvis=^L^R, ht=^I, ind@, kbs=^Y, kf0@, kf1@, kf2@, kf3@, 13612 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, lf0@, nel=^M^Z, rmcup=^L, 13613 rmso=\036E$<\0/>, smcup=^L^R, smso=\036D$<5/>, use=dg200, 13614 13615# dg450 from Cornell (not official) 13616dg450|dg6134|data general 6134, 13617 cub1@, cuf1=^X, use=dg200, 13618 13619# Not official... 13620# Note: lesser Dasher terminals will not work with vi because vi insists upon 13621# having a command to move straight down from any position on the bottom line 13622# and scroll the screen up, or a direct vertical scroll command. The 460 and 13623# above have both, the D210/211, for instance, has neither. We must use ANSI 13624# mode rather than DG mode because standard UNIX tty drivers assume that ^H is 13625# backspace on all terminals. This is not so in DG mode. 13626# (dg460-ansi: removed obsolete ":kn#6:"; also removed ":mu=\EW:", on the 13627# grounds that there is no matching ":ml:" 13628dg460-ansi|Data General Dasher 460 in ANSI-mode, 13629 OTbs, am, msgr, ul, 13630 cols#80, it#8, lines#24, 13631 OTnl=\ED, blink=\E[5m, clear=\E[2J, cub1=^H, cud1=\E[B, 13632 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, 13633 dim=\E[2m, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 13634 ich1=\E[@, il1=\E[L, ind=\E[S, is2=^^F@, kbs=\E[D, 13635 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 13636 kf0=\E[001z, kf1=\E[002z, kf2=\E[003z, kf3=\E[004z, 13637 kf4=\E[005z, kf5=\E[006z, kf6=\E[007z, kf7=\E[008z, 13638 kf8=\E[009z, kf9=\E[00\:z, khome=\E[H, lf0=f1, lf1=f2, 13639 lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf9=f10, 13640 mc0=\E[i, rev=\E[7m, ri=\E[T, rmso=\E[m, rmul=\E[05, 13641 sgr=%?%p9%t\E(0%e\E(B%;\E[0%?%p5%t;2%;%?%p2%t;4%;%?%p4%t;5%;%?%p1%p3%|%t;7%;m, 13642 sgr0=\E(B\E[m, smso=\E[7m, smul=\E[4m, u6=\E[%d;%dR, 13643 u7=\E[6n, u8=\E[5n, u9=\E[0n, 13644# From: Wayne Throop <mcnc!rti-sel!rtp47!throopw> (not official) 13645# Data General 605x 13646# Ought to work for a Model 6242, Type D210 as well as a 605x. 13647# Note that the cursor-down key transmits ^Z. Job control users, beware! 13648# This also matches a posted description of something called a `Dasher 100' 13649# so there's a dg100 alias here. 13650# (dg6053: the 4.4BSD file had <cub1=^H>, <cud1=^J>, <cuf1=^S>. -- esr) 13651dg6053-old|dg100|data general 6053, 13652 OTbs, am, bw, ul, 13653 cols#80, lines#24, 13654 OTbc=^Y, bel=^G, clear=^L, cnorm=^L, cr=^M, cub1=^Y, cud1=^Z, 13655 cuf1=^X, cup=\020%p2%c%p1%c, cuu1=^W, cvvis=^L^R, el=^K, 13656 home=^H, ht=^I, is2=^R, kbs=^Y, kcub1=^Y, kcud1=^Z, kcuf1=^X, 13657 kcuu1=^W, kf0=^^q, kf1=^^r, kf2=^^s, kf3=^^t, kf4=^^u, kf5=^^v, 13658 kf6=^^w, kf7=^^x, kf8=^^y, kf9=^^z, khome=^H, rmcup=^L, 13659 rmso=\0^^E, rmul=^U, smcup=^L^R, smso=\0\0\0\0\0\036D, 13660 smul=^T, 13661 13662# (Some performance can be gained over the generic DG terminal type) 13663dg6053|6053|6053-dg|dg605x|605x|605x-dg|d2|d2-dg|Data General DASHER 6053, 13664 xon@, 13665 home=^P\0\0, ll=^P\0^W, use=dg-generic, 13666 13667# Like 6053, but adds reverse video and more keypad and function keys. 13668d200|d200-dg|Data General DASHER D200, 13669 bold=^^D^T, home@, ll@, rev=^^D, rmso=^^E^], 13670 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;, 13671 sgr0=\017\025\035\036E, smso=^^D^\, use=dgkeys+15, 13672 use=dg6053, 13673 13674# DASHER D210 series terminals in ANSI mode. 13675# Reverse video, no insert/delete character/line, 7 bits/character only. 13676# 13677# Initialization string 1 sets: 13678# <0 - scrolling enabled 13679# <1 - blink enabled 13680# <4 - print characters regardless of attributes 13681d210|d214|Data General DASHER D210 series, 13682 am, bw, msgr, xon, 13683 cols#80, lines#24, 13684 bel=^G, blink=\E[5m, bold=\E[4;7m, clear=\E[2J, cr=^M, 13685 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 13686 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 13687 cuu=\E[%p1%dA, cuu1=\E[A, dim=\E[2m, ed=\E[J, el=\E[K, 13688 el1=\E[1K, home=\E[H, ind=^J, is1=\E[<0;<1;<4l, 13689 ll=\E[H\E[A, nel=^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, 13690 sgr=\E[%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;%?%p1%p3%|%p6%|%t7;%;m, 13691 sgr0=\E[m, smso=\E[2;7m, smul=\E[4m, use=dgkeys+7b, 13692 13693# DASHER D210 series terminals in DG mode. 13694# Like D200, but adds clear to end-of-screen and needs XON/XOFF. 13695d210-dg|d214-dg|Data General DASHER D210 series in DG mode, 13696 xon, 13697 ed=^^FF, use=d200-dg, 13698 13699# DASHER D211 series terminals in ANSI mode. 13700# Like the D210, but with 8-bit characters and local printer support. 13701# 13702# Initialization string 2 sets: 13703# \E[2;1;1;1v 13704# 2;1 - 8 bit operations 13705# 1;1 - 8 bit (international) keyboard language 13706# \E(B - default primary character set (U.S. ASCII) 13707# \E)4 - default secondary character set (international) 13708# ^O - primary character set 13709# 13710d211|d215|Data General DASHER D211 series, 13711 km, 13712 is2=\E[2;1;1;1v\E(B\E)4\017, mc0=\E[i, use=dgkeys+8b, 13713 use=d210, 13714 13715# Initialization string 2 sets: 13716# \E[2;0;1;0v 13717# 2;0 - 7 bit operations 13718# 1;0 - 7 bit (native) keyboard language 13719# \E(0 - default character set (the keyboard native language) 13720# ^O - primary character set 13721d211-7b|d215-7b|Data General DASHER D211 series in 7 bit mode, 13722 km@, 13723 is2=\E[2;0;1;0v\E(0\017, use=dgkeys+7b, use=d211, 13724 13725# Like the D210 series, but adds support for 8-bit characters. 13726# 13727# Reset string 2 sets: 13728# ^^N - secondary character set 13729# ^^FS0> - 8 bit international character set 13730# ^^O - primary character set 13731# ^^FS00 - default character set (matching the native keyboard language) 13732# 13733d211-dg|d215-dg|Data General DASHER D211 series in DG mode, 13734 km, 13735 rs2=\036N\036FS0>\036O\036FS00, use=d210-dg, 13736 13737d216-dg|d216e-dg|d216+dg|d216e+dg|d217-dg|Data General DASHER D216 series in DG mode, 13738 use=d211-dg, 13739 13740# Enhanced DG mode with changes to be more UNIX compatible. 13741d216-unix|d216e-unix|d216+|d216e+|Data General DASHER D216+ in DG-UNIX mode, 13742 mc5i, 13743 it#8, 13744 acsc=a\177j$k"l!m#n)q+t'u&v(w%x*, blink=^^PI, 13745 clear=^^PH, cub1=^^PD, cud1=^^PB, cuf1=^^PC, cuu1=^^PA, 13746 el=^^PE, home=^^PF, hpa=\020%p1%c\177, ht=^I, ind=^J, 13747 is1=\022\003\036P@1, is3=\036Fz0, kHOM=^^Pf, kLFT=^^Pd, 13748 kPRT=^^P1, kRIT=^^Pc, kclr=^^PH, kcub1=^^PD, kcud1=^^PB, 13749 kcuf1=^^PC, kcuu1=^^PA, kel=^^PE, khome=^^PF, kprt=^^P0, 13750 mc0=\036F?9, mc4=^^Fa, mc5=^^F`, rmacs=\036FS00, 13751 rs2=\036N\036FS0E\036O\036FS00, 13752 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;\036P%?%p4%tI%eJ%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, 13753 sgr0=\036PJ\025\035\036E\036FS00, smacs=\036FS11, 13754 vpa=\020\177%p1%c, use=dgkeys+15, use=d216-dg, 13755d216-unix-25|d216+25|Data General DASHER D216+ in DG-UNIX mode with 25 lines, 13756 lines#25, 13757 is3=\036Fz2, use=d216+, 13758 13759d217-unix|Data General DASHER D217 in DG-UNIX mode, 13760 use=d216-unix, 13761d217-unix-25|Data General DASHER D217 in DG-UNIX mode with 25 lines, 13762 use=d216-unix-25, 13763 13764# DASHER D220 color terminal in ANSI mode. 13765# Like the D470C but with fewer colors and screen editing features. 13766# 13767# Initialization string 1 sets: 13768# \E[<0;<1;<4l 13769# <0 - scrolling enabled 13770# <1 - blink enabled 13771# <4 - print characters regardless of attributes 13772# \E[m - all attributes off 13773# Reset string 1 sets: 13774# \Ec - initial mode defaults (RIS) 13775# 13776d220|Data General DASHER D220, 13777 mc5i@, 13778 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, 13779 use=dg+color8, use=d470c, 13780 13781d220-7b|Data General DASHER D220 in 7 bit mode, 13782 mc5i@, 13783 dl@, dl1@, il@, il1@, is1=\E[<0;<1;<4l\E[m, mc4@, mc5@, rs1=\Ec, 13784 use=dg+color8, use=d470c-7b, 13785 13786# Initialization string 3 sets: 13787# - default cursor (solid rectangle) 13788# Reset string 2 sets: 13789# ^^N - secondary character set 13790# ^^FS0> - 8 bit international character set 13791# ^^O - primary character set 13792# ^^FS00 - default character set (matching the native keyboard language) 13793# 13794d220-dg|Data General DASHER D220 color terminal in DG mode, 13795 mc5i@, 13796 dl1@, home@, il1@, is2@, is3=\036FQ2, ll@, mc4@, mc5@, rs1@, 13797 rs2=\036N\036FS0>\036O\036FS00, use=dgmode+color8, 13798 use=d470c-dg, 13799 13800# DASHER D230C color terminal in ANSI mode. 13801# Like the D220 but with minor ANSI compatibility improvements. 13802# 13803d230c|d230|Data General DASHER D230C, 13804 blink=\E[5;50m, bold=\E[4;7;50m, dim=\E[2;50m, nel=^M^J, 13805 rev=\E[7;50m, rmkx=\E[2;1v, rmso=\E[50m, rmul=\E[50m, 13806 sgr=\E[50%?%p1%p3%|%p6%|%t;7%{1}%e%{0}%;%PR%?%p4%t;5%{1}%e%{0}%;%PB%?%p2%p6%|%t;4%{1}%e%{0}%;%PU%?%p1%p5%|%t;2%{1}%e%{0}%;%PDm\E)%?%p9%t6\016%e4\017%;, 13807 sgr0=\E[50m\E)4\017, smkx=\E[2;0v, smso=\E[2;7;50m, 13808 smul=\E[4;50m, use=dgkeys+7b, use=d220, 13809 13810d230c-dg|d230-dg|Data General DASHER D230C in DG mode, 13811 use=d220-dg, 13812 13813# DASHER D400/D450 series terminals. 13814# These add intelligent features like insert/delete to the D200 series. 13815# 13816# Initialization string 2 sets: 13817# ^^FQ2 - default cursor (solid rectangle) 13818# ^^FW - character protection disabled 13819# ^^FJ - normal (80 column) mode 13820# ^^F\^ - horizontal scrolling enabled (for alignment) 13821# ^^FX004? - margins at columns 0 and 79 13822# ^^F] - horizontal scrolling disabled 13823# ^^O - primary character set 13824# ^^FS00 - default character set (the keyboard native language) 13825# - (should reset scrolling regions, but that glitches the screen) 13826# Reset string 1 sets: 13827# ^^FA - all terminal defaults except scroll rate 13828# Reset string 2 sets: 13829# ^^F] - horizontal scrolling disabled 13830# ^^FT0 - jump scrolling 13831# 13832d400|d400-dg|d450|d450-dg|Data General DASHER D400/D450 series, 13833 mc5i, 13834 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\036FQ0, 13835 cnorm=\036FQ2, dch1=^^K, dl1=^^FI, 13836 enacs=\036N\036FS11\036O, home=^^FG, hpa=\020%p1%c\177, 13837 ich1=^^J, il1=^^FH, 13838 is2=\036FQ2\036FW\036FJ\036F\^\036FX004?\036F]\036O\036FS00, 13839 ll=\036FG\027, mc4=^^Fa, mc5=^^F`, ri=^^I, rmacs=^^O, 13840 rs1=^^FA, rs2=\036F]\036FT0, 13841 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036%?%p9%tN%eO%;, 13842 sgr0=\017\025\035\036E\036O, smacs=^^N, 13843 vpa=\020\177%p1%c, use=d210-dg, 13844 13845# DASHER D410/D460 series terminals in ANSI mode. 13846# These add a large number of intelligent terminal features. 13847# 13848# Initialization string 1 sets: 13849# \E[<0;<1;<2;<4l 13850# <0 - scrolling enabled 13851# <1 - blink enabled 13852# <2 - horizontal scrolling enabled (for alignment) 13853# <4 - print characters regardless of attributes 13854# \E[5;0v - normal (80 column) mode 13855# \E[1;1;80w - margins at columns 1 and 80 13856# \E[1;6;<2h 13857# 1 - print all characters even if protected 13858# 6 - character protection disabled 13859# <2 - horizontal scrolling disabled 13860# - (should reset scrolling regions, but that glitches the screen) 13861# 13862# Initialization string 2 sets: 13863# \E[3;2;2;1;1;1v 13864# 3;2 - default cursor (solid rectangle) 13865# 2;1 - 8 bit operations 13866# 1;1 - international keyboard language 13867# \E(B - default primary character set (U.S. ASCII) 13868# \E)4 - default secondary character set (international) 13869# ^O - primary character set 13870# 13871# Reset string 1 sets: 13872# \Ec - initial mode defaults (RIS) 13873# \E[<2h - horizontal scrolling disabled 13874# 13875# Reset string 2 sets: 13876# \E[4;0;2;1;1;1v 13877# 4;0 - jump scrolling 13878# 2;1 - 8 bit operations 13879# 1;1 - 8 bit (international) keyboard language 13880# \E(B - default primary character set (U.S. ASCII) 13881# \E)4 - default secondary character set (international) 13882# 13883d410|d411|d460|d461|Data General DASHER D410/D460 series, 13884 mc5i, 13885 acsc=j$k"l!m#n)q+t'u&v(w%x*, civis=\E[3;0v, 13886 cnorm=\E[3;2v, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 13887 dl1=\E[M, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, 13888 is1=\E[<0;<1;<2;<4l\E[5;0v\E[1;1;80w\E[1;6;<2h, 13889 is2=\E[3;2;2;1;1;1v\E(B\E)4\017, mc4=\E[4i, mc5=\E[5i, 13890 ri=\EM, rmacs=\E)4\017, rs1=\Ec\E[<2h, 13891 rs2=\E[4;0;2;1;1;1v\E(B\E)4, 13892 sgr=\E[%?%p1%t2;7%;%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p1%p5%|%t2;%;%?%p6%t4;7;%;m\E)%?%p9%t6\016%e4\017%;, 13893 sgr0=\E[m\E)4\017, smacs=\E)6\016, use=d211, 13894 13895# Initialization string 2 sets: 13896# \E[3;2;2;0;1;0v 13897# 3;2 - default cursor (solid rectangle) 13898# 2;0 - 7 bit operations 13899# 1;0 - 7 bit (native) keyboard language 13900# \E(0 - default character set (the keyboard native language) 13901# ^O - primary character set 13902# 13903# Reset string 2 sets: 13904# \E[4;0;2;0;1;0v 13905# 4;0 - jump scrolling 13906# 2;0 - 7 bit operations 13907# 1;0 - 7 bit (native) keyboard language 13908# \E(0 - default character set (the keyboard native language) 13909# 13910d410-7b|d411-7b|d460-7b|d461-7b|Data General DASHER D410/D460 series in 7 bit mode, 13911 km@, 13912 enacs=\E)6, is2=\E[3;2;2;0;1;0v\E(0\017, rmacs=^O, 13913 rs2=\E[4;0;2;0;1;0v\E(0, 13914 sgr=\E[%?%p1%p3%|%p6%|%t7;%;%?%p4%t5;%;%?%p2%p6%|%t4;%;%?%p1%p5%|%t2;%;m%?%p9%t\016%e\017%;, 13915 sgr0=\E[m\017, smacs=^N, use=dgkeys+7b, use=d410, 13916 13917d410-dg|d460-dg|d411-dg|d461-dg|Data General DASHER D410/D460 series in DG mode, 13918 km, 13919 enacs@, rmacs=\036FS00, 13920 sgr=\036%?%p1%p3%|%p6%|%tD%eE%;%?%p2%p6%|%t\024%e\025%;%?%p4%t\016%e\017%;%?%p1%p5%|%t\034%e\035%;\036FS%?%p9%t11%e00%;, 13921 sgr0=\017\025\035\036E\036FS00, smacs=\036FS11, 13922 use=d400-dg, 13923 13924# DASHER D410/D460 series terminals in wide (126 columns) ANSI mode. 13925# 13926# Initialization string 1 sets: 13927# \E[<0;<1;<2;<4l 13928# <0 - scrolling enabled 13929# <1 - blink enabled 13930# <2 - horizontal scrolling enabled (for alignment) 13931# <4 - print characters regardless of attributes 13932# \E[5;1v - compressed (135 column) mode 13933# \E[1;1;126 - margins at columns 1 and 126 13934# \E[1;6;<2h 13935# 1 - print all characters even if protected 13936# 6 - character protection disabled 13937# <2 - horizontal scrolling disabled 13938# - (should reset scrolling regions, but that glitches the screen) 13939# 13940# Reset string 1 sets: 13941# \Ec - initial mode defaults (RIS) 13942# \E[5;1v - compressed (135 column) mode 13943# \E[1;1;126w - margins at columns 1 and 126 13944# \E[<2h - horizontal scrolling disabled 13945# 13946d410-w|d411-w|d460-w|d461-w|Data General DASHER D410/D460 series in wide mode, 13947 cols#126, 13948 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, 13949 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410, 13950 13951d410-7b-w|d411-7b-w|d460-7b-w|d461-7b-w|Data General DASHER D410/D460 series in wide 7 bit mode, 13952 cols#126, 13953 is1=\E[<0;<1;<2;<4l\E[5;1v\E[1;1;126w\E[1;6;<2h, 13954 rs1=\Ec\E[5;1v\E[1;1;126w\E[<2h, use=d410-7b, 13955 13956d412-dg|d462-dg|d462e-dg|d412+dg|d462+dg|d413-dg|d463-dg|Data General DASHER D412/D462 series in DG mode, 13957 use=d410-dg, 13958 13959# These add intelligent features like scrolling regions. 13960d412-unix|d462-unix|d412+|d462+|Data General DASHER D412+/D462+ series in Unix mode, 13961 civis=\036FQ0, clear=^^FE, cnorm=\036FQ5, 13962 cup=\036FP%p2%2.2X%p1%2.2X, dch1=^^K, dl1=^^FI, 13963 home=^^FG, hpa=\036FP%p1%2.2XFF, ich1=^^J, il1=^^FH, 13964 is2=\036FQ5\036FW\036FJ\036F\^\036FX004F\036O\036FS00, 13965 ll=\036FG\036PA, mc0=^A, rc=\036F}11, ri=^^I, 13966 rs1=\036FA\036FT0, rs2=\036P@1, sc=\036F}10, 13967 vpa=\036FPFF%p1%2.2X, 13968 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, 13969 use=d216+, 13970d412-unix-w|d462-unix-w|d412+w|d462+w|Data General DASHER D412+/D462+ series in wide Unix mode, 13971 cols#132, 13972 is2=\036FQ5\036FW\036FK\036F\^\036FX0083\036O\036FS00, 13973 rs2=\036P@1\036FK\036FX0083, 13974 wind=\036FB%?%p1%t%p1%2.2X1%;%p2%p1%-%{1}%+%2.2X1%?%{23}%p2%>%t001%;\036FX%p3%2.2X%p4%2.2X, 13975 use=d412-unix, 13976d412-unix-25|d462-unix-25|d412+25|d462+25|Data General DASHER D412+/D462+ series in Unix mode with 25 lines, 13977 lines#25, 13978 is3=\036Fz2, 13979 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{24}%p2%>%t000%;\036FX%p3%2.2X%p4%2.2X, 13980 use=d462+, 13981d412-unix-s|d462-unix-s|d412+s|d462+s|Data General DASHER D412+/D462+ in Unix mode with status line, 13982 eslok, hs, 13983 clear=\036FG\036PH, fsl=\036F}01\022, 13984 is3=\036Fz2\036F}00\036FB180000\036F}01, ll@, 13985 tsl=\036F}00\036FP%p1%2.2X18\036PG, 13986 wind=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t%{23}%p2%-%2.2X0%;000\036FX%p3%2.2X%p4%2.2X, 13987 use=d462+, 13988 13989# Relative cursor motions are confined to the current window, 13990# which is not what the scrolling region specification expects. 13991# Thus, relative vertical cursor positioning must be deleted. 13992d412-unix-sr|d462-unix-sr|d412+sr|d462+sr|Data General DASHER D412+/D462+ in Unix mode with scrolling region, 13993 csr=\036FB%?%p1%t%p1%2.2X0%;%p2%p1%-%{1}%+%2.2X0%?%{23}%p2%>%t000%;, 13994 cud1@, cuu1@, ll@, use=d462+, 13995 13996d413-unix|d463-unix|Data General DASHER D413/D463 series in DG-UNIX mode, 13997 use=d412-unix, 13998d413-unix-w|d463-unix-w|Data General DASHER D413/D463 series in wide DG-UNIX mode, 13999 use=d412-unix-w, 14000d413-unix-25|d463-unix-25|Data General DASHER D413/D463 series in DG-UNIX mode with 25 lines, 14001 use=d412-unix-25, 14002d413-unix-s|d463-unix-s|Data General DASHER D413/D463 in DG-UNIX mode with status line, 14003 use=d412-unix-s, 14004d413-unix-sr|d463-unix-sr|Data General DASHER D413/D463 in DG-UNIX mode with scrolling region, 14005 use=d412-unix-sr, 14006 14007d414-unix|d464-unix|Data General D414/D464 in DG-UNIX mode, 14008 use=d413-unix, 14009d414-unix-w|d464-unix-w|Data General D414/D464 in wide DG-UNIX mode, 14010 use=d413-unix-w, 14011d414-unix-25|d464-unix-25|Data General D414/D464 in DG-UNIX mode with 25 lines, 14012 use=d413-unix-25, 14013d414-unix-s|d464-unix-s|Data General D414/D464 in DG-UNIX mode with status line, 14014 use=d413-unix-s, 14015d414-unix-sr|d464-unix-sr|Data General D414/D464 in DG-UNIX mode with scrolling region, 14016 use=d413-unix-sr, 14017 14018d430c-dg|d430-dg|Data General D430C in DG mode, 14019 use=d413-dg, use=dg+fixed, 14020d430c-dg-ccc|d430-dg-ccc|Data General D430C in DG mode with configurable colors, 14021 use=d413-dg, use=dg+ccc, 14022 14023d430c-unix|d430-unix|Data General D430C in DG-UNIX mode, 14024 use=d413-unix, use=dgunix+fixed, 14025d430c-unix-w|d430-unix-w|Data General D430C in wide DG-UNIX mode, 14026 use=d413-unix-w, use=dgunix+fixed, 14027d430c-unix-25|d430-unix-25|Data General D430C in DG-UNIX mode with 25 lines, 14028 use=d413-unix-25, use=dgunix+fixed, 14029d430c-unix-s|d430-unix-s|Data General D430C in DG-UNIX mode with status line, 14030 use=d413-unix-s, use=dgunix+fixed, 14031d430c-unix-sr|d430-unix-sr|Data General D430C in DG-UNIX mode with scrolling region, 14032 use=d413-unix-sr, use=dgunix+fixed, 14033d430c-unix-ccc|d430-unix-ccc|Data General D430C in DG-UNIX mode with configurable colors, 14034 use=d413-unix, use=dgunix+ccc, 14035d430c-unix-w-ccc|d430-unix-w-ccc|Data General D430C in wide DG-UNIX mode with configurable colors, 14036 use=d413-unix-w, use=dgunix+ccc, 14037d430c-unix-25-ccc|d430-unix-25-ccc|Data General D430C in DG-UNIX mode with 25 lines and configurable colors, 14038 use=d413-unix-25, use=dgunix+ccc, 14039d430c-unix-s-ccc|d430-unix-s-ccc|Data General D430C in DG-UNIX mode with status line and configurable colors, 14040 use=d413-unix-s, use=dgunix+ccc, 14041d430c-unix-sr-ccc|d430-unix-sr-ccc|Data General D430C in DG-UNIX mode with scrolling region and configurable colors, 14042 use=d413-unix-sr, use=dgunix+ccc, 14043 14044# DASHER D470C color terminal in ANSI mode. 14045# Like the D460 but with 16 colors and without a compressed mode. 14046# 14047# Initialization string 1 sets: 14048# \E[<0;<1;<2;<4l 14049# <0 - scrolling enabled 14050# <1 - blink enabled 14051# <2 - horizontal scrolling enabled (for alignment) 14052# <4 - print characters regardless of attributes 14053# \E[1;1;80w - margins at columns 1 and 80 14054# \E[1;6;<2h 14055# 1 - print all characters even if protected 14056# 6 - character protection disabled 14057# <2 - horizontal scrolling disabled 14058# - (should reset scrolling regions, but that glitches the screen) 14059# 14060d470c|d470|Data General DASHER D470C, 14061 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, 14062 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m\E)%?%p9%t6\016%e4\017%;, 14063 use=dg+color, use=d460, 14064 14065d470c-7b|d470-7b|Data General DASHER D470C in 7 bit mode, 14066 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, 14067 sgr=\E[%?%p3%t7;%;%?%p4%t5;%;%?%p2%t4;%;%?%p6%t4;7;%;%?%p1%t2;7;%;%?%p5%t2;%;m%?%p9%t\016%e\017%;, 14068 use=dg+color, use=d460-7b, 14069 14070# Initialization string 2 sets: 14071# ^^FQ2 - default cursor (solid rectangle) 14072# ^^FW - character protection disabled 14073# ^^F\^ - horizontal scrolling enabled (for alignment) 14074# ^^FX004? - margins at columns 0 and 79 14075# ^^F] - horizontal scrolling disabled 14076# ^^O - primary character set 14077# ^^FS00 - default character set (the keyboard native language) 14078# - (should reset scrolling regions, but that glitches the screen) 14079# 14080d470c-dg|d470-dg|Data General DASHER D470C in DG mode, 14081 is2=\036FQ2\036FW\036F\^\036FX004?\036F]\036O\036FS00, 14082 use=dgmode+color, use=d460-dg, 14083 14084# DASHER D555 terminal in ANSI mode. 14085# Like a D411, but has an integrated phone. 14086d555|Data General DASHER D555, 14087 use=d411, 14088d555-7b|Data General DASHER D555 in 7-bit mode, 14089 use=d411-7b, 14090d555-w|Data General DASHER D555 in wide mode, 14091 use=d411-w, 14092d555-7b-w|Data General DASHER D555 in wide 7-bit mode, 14093 use=d411-7b-w, 14094d555-dg|Data General DASHER D555 series in DG mode, 14095 use=d411-dg, 14096 14097# DASHER D577 terminal in ANSI mode. 14098# Like a D411, but acts as a keyboard for serial printers ("KSR" modes). 14099d577|Data General DASHER D577, 14100 use=d411, 14101d577-7b|Data General DASHER D577 in 7-bit mode, 14102 use=d411-7b, 14103d577-w|Data General DASHER D577 in wide mode, 14104 use=d411-w, 14105d577-7b-w|Data General DASHER D577 in wide 7-bit mode, 14106 use=d411-7b-w, 14107 14108d577-dg|d578-dg|Data General DASHER D577/D578 series in DG mode, 14109 use=d411-dg, 14110 14111# DASHER D578 terminal. 14112# Like a D577, but without compressed mode; like a D470C in this respect. 14113# 14114# Initialization string 1 sets: 14115# \E[<0;<1;<2;<4l 14116# <0 - scrolling enabled 14117# <1 - blink enabled 14118# <2 - horizontal scrolling enabled (for alignment) 14119# <4 - print characters regardless of attributes 14120# \E[1;1;80w - margins at columns 1 and 80 14121# \E[1;6;<2h 14122# 1 - print all characters even if protected 14123# 6 - character protection disabled 14124# <2 - horizontal scrolling disabled 14125# - (should reset scrolling regions, but that glitches the screen) 14126# 14127d578|Data General DASHER D578, 14128 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577, 14129d578-7b|Data General DASHER D578 in 7-bit mode, 14130 is1=\E[<0;<1;<2;<4l\E[1;1;80w\E[1;6;<2h, use=d577-7b, 14131 14132#### Datamedia (dm) 14133# 14134# Datamedia was headquartered in Nashua, New Hampshire until it went 14135# out of business in 1993, but the ID plates on the terminals referred 14136# to the factory in Pennsauken, NJ. The factory was sold to a PCB board 14137# manufacturer which threw out all information about the terminals. 14138# 14139 14140cs10|colorscan|Datamedia Color Scan 10, 14141 msgr, 14142 cols#80, lines#24, 14143 bel=^G, clear=\E[H\E[J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 14144 cup=\E[%i%p1%02d;%p2%02dH, cuu1=\E[A, ed=\E[J, el=\E[K, 14145 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 14146 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rmso=\E[m, rmul=\E[m, 14147 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 14148cs10-w|Datamedia Color Scan 10 with 132 columns, 14149 cols#132, 14150 cup=\E[%i%p1%02d;%p2%03dH, use=cs10, 14151 14152# (dm1520: removed obsolete ":ma=^\ ^_^P^YH:" -- esr) 14153dm1520|dm1521|datamedia 1520, 14154 OTbs, am, xenl, 14155 cols#80, it#8, lines#24, 14156 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, 14157 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 14158 home=^Y, ht=^I, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, 14159 khome=^Y, 14160# dm2500: this terminal has both <ich> and <smir>. Applications using 14161# termcap/terminfo directly (rather than through ncurses) might be confused. 14162dm2500|datamedia2500|datamedia 2500, 14163 OTbs, OTnc, 14164 cols#80, lines#24, 14165 bel=^G, clear=^^^^\177, cub1=^H, cud1=^J, cuf1=^\, 14166 cup=\014%p2%{96}%^%c%p1%{96}%^%c, cuu1=^Z, 14167 dch1=\020\010\030\035$<10*>, 14168 dl1=\020\032\030\035$<10*>, el=^W, home=^B, 14169 ich1=\020\034\030\035$<10*>, 14170 il1=\020\n\030\035\030\035$<15>, ind=^J, pad=\377, 14171 rmdc=^X^], rmir=\377\377\030\035$<10>, rmso=^X^], 14172 smdc=^P, smir=^P, smso=^N, 14173# dmchat is like DM2500, but DOES need "all that padding" (jcm 1/31/82) 14174# also, has a meta-key. 14175# From: <goldberger@su-csli.arpa> 14176# (dmchat: ":MT:" changed to ":km:" -- esr) 14177dmchat|dmchat version of datamedia 2500, 14178 km, 14179 dl1=\020\032\030\035$<2/>, 14180 il1=\020\n\030\035\030\035$<1*/>, use=dm2500, 14181# (dm3025: ":MT:" changed to ":km:" -- esr) 14182dm3025|datamedia 3025a, 14183 OTbs, km, 14184 cols#80, it#8, lines#24, 14185 bel=^G, clear=\EM$<2>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 14186 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, 14187 dch1=\010$<6>, dl1=\EP\EA\EQ$<130>, ed=\EJ$<2>, el=\EK, 14188 home=\EH, ht=^I, il1=\EP\n\EQ$<130>, ind=^J, ip=$<6>, 14189 is2=\EQ\EU\EV, rmdc=\EQ, rmir=\EQ, rmso=\EO0, smdc=\EP, 14190 smir=\EP, smso=\EO1, 14191dm3045|datamedia 3045a, 14192 OTbs, am, eo, km@, ul, xenl, 14193 dch1=\EB$<6>, dl1@, il1@, is2=\EU\EV, kcuf1=\EC, kcuu1=\EA, 14194 kf0=\Ey\r, kf1=\Ep\r, kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, 14195 kf5=\Et\r, kf6=\Eu\r, kf7=\Ev\r, kf8=\Ew\r, kf9=\Ex\r, 14196 khome=\EH, pad=\177, rmdc@, rmir=\EP, rmso@, smdc@, smso@, 14197 use=dm3025, 14198# Datamedia DT80 soft switches: 14199# 1 0=Jump 1=Smooth 14200# Autorepeat 0=off 1=on 14201# Screen 0=Dark 1=light 14202# Cursor 0=u/l 1=block 14203# 14204# 2 Margin Bell 0=off 1=on 14205# Keyclick 0=off 1=on 14206# Ansi/VT52 0=VT52 1=Ansi 14207# Xon/Xoff 0=Off 1=On 14208# 14209# 3 Shift3 0=Hash 1=UK Pound 14210# Wrap 0=Off 1=On 14211# Newline 0=Off 1=On 14212# Interlace 0=Off 1=On 14213# 14214# 4 Parity 0=Odd 1=Even 14215# Parity 0=Off 1=On 14216# Bits/Char 0=7 1=8 14217# Power 0=60Hz 1=50Hz 14218# 14219# 5 Line Interface 0=EIA 1=Loop 14220# Aux Interface 0=EIA 1=Loop 14221# Local Copy 0=Off 1=On 14222# Spare 14223# 14224# 6 Aux Parity 0=Odd 1=Even 14225# Aux Parity 0=Off 1=On 14226# Aux Bits/Char 0=7 1=8 14227# CRT Saver 0=Off 1=On 14228# dm80/1 is a vt100 lookalike, but it doesn't seem to need any padding. 14229dm80|dmdt80|dt80|datamedia dt80/1, 14230 clear=\E[2J\E[H, cud1=^J, cuf1=\E[C, 14231 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 14232 home=\E[H, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, ri=\EM, 14233 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 14234 use=vt100, 14235# except in 132 column mode, where it needs a little padding. 14236# This is still less padding than the vt100, and you can always turn on 14237# the ^S/^Q handshaking, so you can use vt100 flavors for things like 14238# reverse video. 14239dm80w|dmdt80w|dt80w|datamedia dt80/1 in 132 char mode, 14240 cols#132, 14241 clear=\E[H\E[2J$<50/>, cud1=^J, 14242 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<5/>, 14243 ed=\E[0J$<20/>, el=\E[0K$<20/>, use=dm80, 14244# From: Adam Thompson <athompso@pangea.ca> Sept 10 1995 14245dt80-sas|Datamedia DT803/DTX for SAS usage, 14246 am, bw, 14247 cols#80, lines#24, 14248 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 14249 bel=^G, clear=^L, cr=^M, 14250 csr=\E=%p1%{32}%+%c%{32}%c\E#1\E=%p2%{32}%+%c%{32}%c\E#2, 14251 cub1=^H, cud1=\EB, cuf1=^\, 14252 cup=\E=%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, dl1=\EM, ed=^K, 14253 el=^], ff=^L, home=^Y, ht=^I, hts=\E'1, il1=\EL, ind=\EB, 14254 is2=\E)0\E<\EP\E'0\E$2, kclr=^L, kcub1=^H, kcud1=^J, 14255 kcuf1=^\, kcuu1=^_, ked=^K, kel=^], khome=^Y, mc4=^O, mc5=^N, 14256 rev=\E$2\004, ri=\EI, rmacs=\EG, rmso=^X, sgr0=^X, smacs=\EF, 14257 smso=\E$2\004, tbc=\E'0, 14258 14259# Datamedia Excel 62, 64 from Gould/SEL UTX/32 via BRL 14260# These aren't end-all Excel termcaps; but do insert/delete char/line 14261# and name some of the extra function keys. (Mike Feldman ccvaxa!feldman) 14262# The naming convention has been bent somewhat, with the use of E? (where 14263# E is for 'Excel') as # a name. This was done to distinguish the entries 14264# from the other Datamedias in use here, and yet to associate a model of 14265# the Excel terminals with the regular datamedia terminals that share 14266# major characteristics. 14267excel62|excel64|datamedia Excel 62, 14268 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, 14269 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, 14270 use=dt80, 14271excel62-w|excel64-w|datamedia Excel 62 in 132 char mode, 14272 dch1=\E[P, kbs=^H, kcub1=^H, kcud1=^J, kf5=\EOu, kf6=\EOv, 14273 kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, smir=\E[4h, 14274 use=dt80w, 14275excel62-rv|excel64-rv|datamedia Excel 62 in reverse video mode, 14276 dch1=\E[P, flash=\E[?5l\E[?5h, kbs=^H, kcub1=^H, kcud1=^J, 14277 kf5=\EOu, kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, rmir=\E[4l, 14278 smir=\E[4h, use=dt80, 14279 14280#### Falco 14281# 14282# Falco Data Products 14283# 440 Potrero Avenue 14284# Sunnyvale, CA 940864-196 14285# Vox: (800)-325-2648 14286# Fax: (408)-745-7860 14287# Net: techsup@charm.sys.falco.com 14288# 14289# Current Falco models as of 1995 are generally ANSI-compatible and support 14290# emulations of DEC VT-series, Wyse, and Televideo types. 14291# 14292 14293# Test version for Falco ts-1. See <arpavax.hickman@ucb> for info 14294# This terminal was released around 1983 and was discontinued long ago. 14295# The standout and underline highlights are the same. 14296falco|ts1|ts-1|falco ts-1, 14297 OTbs, am, 14298 cols#80, it#8, lines#24, 14299 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 14300 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 14301 dl1=\ER, ed=\EY, el=\ET\EG0\010, home=^^, ht=^I, il1=\EE, 14302 ind=^J, is2=\Eu\E3, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 14303 kf0=^A0\r, rmir=\Er, rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, 14304 smir=\Eq, smso=\Eg1, smul=\Eg1, 14305falco-p|ts1p|ts-1p|falco ts-1 with paging option, 14306 OTbs, am, da, db, mir, msgr, ul, 14307 cols#80, it#8, lines#24, 14308 bel=^G, cbt=\EI, clear=\E*, cr=^M, cub1=^H, cud1=\E[B, 14309 cuf1=\E[C, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E[A, 14310 dch1=\EW, dl1=\ER, ed=\EY, el=\ET\EG0\010\Eg0, ht=^I, 14311 il1=\EE, ind=^J, is2=\EZ\E3\E_c, kcub1=\E[D, kcud1=\E[B, 14312 kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, rmcup=\E_b, rmir=\Er, 14313 rmso=\Eg0, rmul=\Eg0, sgr0=\Eg0, smcup=\E_d, smir=\Eq, 14314 smso=\Eg4, smul=\Eg1, 14315# (ts100: I added <rmam>/<smam> based on the init string -- esr) 14316ts100|ts100-sp|falco ts100-sp, 14317 am, mir, msgr, xenl, xon, 14318 cols#80, it#8, lines#24, vt#3, 14319 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 14320 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 14321 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 14322 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 14323 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 14324 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 14325 cuu1=\E[A$<2>, dch1=\E~W, dl1=\E~R, ed=\E[J$<50>, 14326 el=\E[K$<3>, el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, 14327 ht=^I, hts=\EH, ich1=\E~Q, il1=\E~E, ind=^J, is1=\E~)\E~ea, 14328 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 14329 rc=\E8, rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 14330 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 14331 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 14332 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 14333 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 14334 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 14335 use=vt100+fnkeys, 14336ts100-ctxt|falco ts-100 saving context, 14337 rmcup=\E~_b, smcup=\E~_d\E[2J, use=ts100, 14338 14339#### Florida Computer Graphics 14340# 14341 14342# Florida Computer Graphics Beacon System, using terminal emulator program 14343# "host.com", as provided by FCG. This description is for an early release 14344# of the "host" program. Known bug: <ed> clears the whole screen, so it's 14345# commented out. 14346 14347# From: David Bryant <cbosg!djb> 1/7/83 14348beacon|FCG Beacon System, 14349 am, da, db, 14350 cols#80, lines#32, 14351 bel=\ESTART\r\E37\r\EEND\r$<1>, 14352 blink=\ESTART\r\E61\,1\r\EEND\r, clear=\EZ$<10>, cr=^M, 14353 cub1=^H, cud1=^J, cuf1=\EV, 14354 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=\EU, 14355 dch1=\EW, dl1=\ER, el=\ET, home=\EH$<10>, ich1=\EQ, il1=\EE, 14356 ind=^J, rev=\ESTART\r\E59\,1\r\EEND\r, rmcup=, 14357 rmso=\ESTART\r\E70\,0\r\EEND\r$<20>, 14358 rmul=\ESTART\r\E60\,0\r\EEND\r, 14359 sgr0=\ESTART\r\E78\r\E70\,0\r\EEND\r$<20>, 14360 smcup=\ESTART\r\E2\,0\r\E12\r\EEND\r$<10>, 14361 smso=\ESTART\r\E70\,6\r\EEND\r$<20>, 14362 smul=\ESTART\r\E60\,1\r\EEND\r, 14363 14364#### Fluke 14365# 14366 14367# The f1720a differences from ANSI: no auto margin, destructive 14368# tabs, # of lines, funny highlighting and underlining 14369f1720|f1720a|fluke 1720A, 14370 xt, 14371 cols#80, lines#16, xmc#1, 14372 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 14373 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, 14374 el=\E[K, ind=\ED, is2=\E[H\E[2J, kcub1=^_, kcud1=^], 14375 kcuf1=^^, kcuu1=^\, ri=\EM, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 14376 smso=\E[7m, smul=\E[4m, 14377 14378#### Liberty Electronics (Freedom) 14379# 14380# Liberty Electronics 14381# 48089 Fremont Blvd 14382# Fremont CA 94538 14383# Vox: (510)-623-6000 14384# Fax: (510)-623-7021 14385 14386# From: <faletti@berkeley.edu> 14387# (f100: added empty <acsc> to suppress a tic warning; 14388# made this relative to adm+sgr -- note that <invis> isn't 14389# known to work for f100 but does on the f110. --esr) 14390f100|freedom|freedom100|freedom model 100, 14391 OTbs, am, bw, hs, mir, msgr, xon, 14392 cols#80, lines#24, 14393 acsc=, bel=^G, cbt=\EI, clear=^Z, cr=^M, cub1=^H, cud1=^J, 14394 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 14395 dch1=\EW, dl1=\ER$<11.5*>, dsl=\Eg\Ef\r, ed=\EY, el=\ET, 14396 flash=\Eb$<200>\Ed, fsl=^M, home=^^, hpa=\E]%p1%{32}%+%c, 14397 ht=^I, hts=\E1, il1=\EE$<8.5*>, ind=^J, ip=$<6>, 14398 is2=\Eg\Ef\r\Ed, kbs=^H, kcbt=\EI, kcub1=^H, kcud1=^V, 14399 kcuf1=^L, kcuu1=^K, kf1=^A@\r, kf10=^AI\r, kf2=^AA\r, 14400 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 14401 kf8=^AG\r, kf9=^AH\r, khome=^^, ri=\Ej, rmacs=\E$, rmir=\Er, 14402 smacs=\E%%, smir=\Eq, tbc=\E3, tsl=\Eg\Ef, 14403 vpa=\E[%p1%{32}%+%c, use=adm+sgr, 14404f100-rv|freedom-rv|freedom 100 in reverse video, 14405 flash=\Ed$<200>\Eb, is2=\Eg\Ef\r\Eb, use=f100, 14406# The f110 and f200 have problems with vi(1). They use the ^V 14407# code for the down cursor key. When kcud1 is defined in terminfo 14408# as ^V, the Control Character Quoting capability (^V in insert mode) 14409# is lost! It cannot be remapped in vi because it is necessary to enter 14410# a ^V to to quote the ^V that is being remapped!!! 14411# 14412# f110/f200 users will have to decide whether 14413# to lose the down cursor key or the quoting capability. We will opt 14414# initially for leaving the quoting capability out, since use of VI 14415# is not generally applicable to most interactive applications 14416# (f110: added <ht>, <khome> & <kcbt> from f100 -- esr) 14417f110|freedom110|Liberty Freedom 110, 14418 bw@, eslok, 14419 it#8, wsl#80, 14420 blink=\EG2, bold=\EG0, civis=\E.1, cnorm=\E.2, cud1=^V, 14421 dim=\EG@, dl1=\ER, dsl=\Ef\r, flash=\Eb$<200/>\Ed, il1=\EE, 14422 ip@, is2@, kclr=^^, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, 14423 kf0=^AI\r, kf10@, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, 14424 ri=\EJ, rmacs=\E%%, rmir=\Er\EO, smacs=\E$, smir=\EO\Eq, 14425 smso=\EG<, tsl=\Ef, use=f100, 14426f110-14|Liberty Freedom 110 14inch, 14427 dch1@, use=f110, 14428f110-w|Liberty Freedom 110 - 132 cols, 14429 cols#132, use=f110, 14430f110-14w|Liberty Freedom 110 14in/132 cols, 14431 cols#132, 14432 dch1@, use=f110, 14433# (f200: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 14434f200|freedom200|Liberty Freedom 200, 14435 OTbs, am, eslok, hs, mir, msgr, xon, 14436 cols#80, it#8, lines#24, wsl#80, 14437 acsc=, bel=^G, blink=\EG2, bold=\EG0, cbt=\EI, civis=\E.0, 14438 clear=^Z, cnorm=\E.1, cr=^M, 14439 csr=\Em0%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^V, 14440 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 14441 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, 14442 flash=\Eo$<200/>\En, fsl=^M, home=^^, 14443 hpa=\E]%p1%{32}%+%c, hts=\E1, il1=\EE, ind=^J, kbs=^H, 14444 kclr=^^, kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, 14445 kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, 14446 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 14447 kf8=^AG\r, kf9=^AH\r, kich1=\EQ, kil1=\EE, mc4=\Ea, mc5=\E`, 14448 ri=\EJ, rmacs=\E%%, rmir=\Er, smacs=\E$, smir=\Eq, smso=\EG<, 14449 tbc=\E3, tsl=\Ef, vpa=\E[%p1%{32}%+%c, use=adm+sgr, 14450f200-w|Liberty Freedom 200 - 132 cols, 14451 cols#132, use=f200, 14452# The f200 has the ability to reprogram the down cursor key. The key is 14453# reprogrammed to ^J (linefeed). This value is remembered in non-volatile RAM, 14454# so powering the terminal off and on will not cause the change to be lost. 14455f200vi|Liberty Freedom 200 for vi, 14456 flash=\Eb$<200/>\Ed, kcud1=^J, use=f200, 14457f200vi-w|Liberty Freedom 200 - 132 cols for vi, 14458 cols#132, use=f200vi, 14459 14460#### GraphOn (go) 14461# 14462# Graphon Corporation 14463# 544 Division Street 14464# Campbell, CA 95008 14465# Vox: (408)-370-4080 14466# Fax: (408)-370-5047 14467# Net: troy@graphon.com (Troy Morrison) 14468# 14469# 14470# The go140 and go225 have been discontinued. GraphOn now makes X terminals, 14471# including one odd hybrid that starts out life on power-up as a character 14472# terminal, than can be switched to X graphics mode (driven over the serial 14473# line) by an escape sequence. No info on this beast yet. 14474# (go140: I added <rmam>/<smam> based on the init string -- esr) 14475go140|graphon go-140, 14476 OTbs, 14477 cols#80, it#8, lines#24, 14478 clear=\E[H\E[2J$<10/>, cub1=^H, cud1=\E[B, cuf1=\E[C, 14479 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 14480 ed=\E[J$<10/>, el=\E[K, ht=^I, 14481 if=/usr/share/tabset/vt100, il1=\E[L, 14482 is2=\E<\E=\E[?3l\E[?7l\E(B\E[J\E7\E[;r\E8\E[m\E[q, 14483 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 14484 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, 14485 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, 14486 rmul=\E[m, sgr0=\E[m, smam=\E[?7h, smir=\E[4h, 14487 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 14488go140w|graphon go-140 in 132 column mode, 14489 am, 14490 cols#132, 14491 is2=\E<\E=\E[?3h\E[?7h\E(B\E[J\E7\E[;r\E8\E[m\E[q, 14492 use=go140, 14493# Hacked up vt200 termcap to handle GO-225/VT220 14494# From: <edm@nwnexus.WA.COM> 14495# (go225: I added <rmam>/<smam> based on the init string -- esr) 14496go225|go-225|Graphon 225, 14497 OTbs, am, mir, xenl, 14498 cols#80, it#8, lines#25, vt#3, 14499 blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 14500 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 14501 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 14502 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[L, ind=\ED, 14503 is2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, kbs=^H, 14504 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 14505 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, rc=\E8, rev=\E[7m, 14506 rf=/usr/share/tabset/vt100, ri=\EM, rmam=\E[?7l, 14507 rmcup=\E[!p\E[?7h\E[2;1;1#w, rmir=\E[4l, rmkx=\E>, 14508 rmso=\E[27m, rmul=\E[24m, rs1=\E[!p\E[?7h\E[2;1;1#w, 14509 sc=\E7, sgr0=\E[m, smam=\E[?7h, smcup=\E[2;0#w\E[1;25r, 14510 smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, 14511 14512#### Harris (Beehive) 14513# 14514# Bletch. These guys shared the Terminal Brain Damage laurels with Hazeltine. 14515# Their terminal group is ancient history now (1995) though the parent 14516# company is still in business. 14517# 14518 14519# Beehive documentation is undated and marked Preliminary and has no figures 14520# so we must have early Superbee2 (Model 600, according to phone conversation 14521# with mfr.). It has proved reliable except for some missing padding 14522# (notably after \EK and <nl> at bottom of screen). 14523# 14524# The key idea is that AEP mode is poison for <cup> & that US's in 14525# the local memory should be avoided like the plague. That means 14526# that the 2048 character local buffer is used as 25 lines of 80 14527# characters, period. No scrolling local memory, folks. It also 14528# appears that we cannot use naked INS LINE feature since it uses 14529# US. The sbi fakes <il1> with an 80-space insert that may be too 14530# slow at low speeds; also spaces get converted to \040 which is 14531# too long for some programs (not vi). DEL LINE is ok but slow. 14532# 14533# The <nl> string is designed for last line of screen ONLY; cup to 14534# 25th line corrects the motion inherent in scrolling to Page 1. 14535# 14536# There is one understood bug. It is that the screen appears to 14537# pop to a new (blank) page after a <nel>, or leave a half-line 14538# ellipsis to a quad that is the extra 48 memory locations. The 14539# data received is dumped into memory but not displayed. Not to 14540# worry if <cup> is being used; the lines not displayed will be, 14541# whenever the cursor is moved up there. Since <cup> is addressed 14542# relative to MEMORY of window, nothing is lost; but beware of 14543# relative cursor motion (<cuu1>,<cud1>,<cuf1>,<cub1>). Recommended, 14544# therefore, is setenv MORE -c . 14545# 14546# WARNING: Not all features tested. 14547# 14548# Timings are assembled from 3 sources. Some timings may reflect 14549# SB2/Model 300 that were used if more conservative. 14550# Tested on a Model 600 at 1200 and 9600 bd. 14551# 14552# The BACKSPACEkb option is cute. The NEWLINE key, so cleverly 14553# placed on the keyboard and useless because of AEP, is made 14554# into a backspace key. In use ESC must be pressed twice (to send) 14555# and sending ^C must be prefixed by ESC to avoid that weird 14556# transmit mode associated with ENTER key. 14557# 14558# IF TERMINAL EVER GOES CATATONIC with the cursor buzzing across 14559# the screen, then it has dropped into ENTER mode; hit 14560# RESET--ONLINE--!tset. 14561# 14562# As delivered this machine has a FATAL feature that will throw 14563# it into that strange transmit state (SPOW) if the space bar is 14564# hit after a CR is received, but before receiving a LF (or a 14565# few others). 14566# 14567# The circuits MUST be modified to eliminate the SPOW latch. 14568# This is done by strapping on chip A46 of the I/O board; cut 14569# the p.c. connection to Pin 5 and strap Pin 5 to Pin 8 of that 14570# chip. This mod has been checked out on a Mod 600 of Superbee II. 14571# With this modification absurdly high timings on cr are 14572# unnecessary. 14573# 14574# NOTE WELL that the rear panel switch should be set to CR/LF, 14575# not AEP! 14576# 14577sb1|beehive superbee, 14578 OTbs, am, bw, da, db, mir, ul, xsb, 14579 cols#80, lines#25, xmc#1, 14580 bel=^G, cbt=\E`$<650>, clear=\EH$<1>\EJ$<3>, cr=$<1>\r, 14581 cub1=^H, cud1=^J, cuf1=\EC$<3>, cup=\EF%p2%03d%p1%03d, 14582 cuu1=\EA$<3>, dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, 14583 el=\EK$<3>, home=\EH$<1>, ht=^I, hts=\E1, 14584 il1=\EN\EL$<3>\EQ \EP$<3> \EO\ER\EA$<3>, 14585 ind=^J, is2=\EE$<3>\EX\EZ\EO\Eb\Eg\ER, kbs=^_, kcub1=\ED, 14586 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdl1=\EM, ked=\EJ, kel=\EK, 14587 kf0=\E2, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, 14588 kf7=\Ev, kf8=\Ew, kf9=\E1, khome=\EH, kich1=\EQ\EO, 14589 krmir=\ER, lf0=TAB CLEAR, lf9=TAB SET, rmcup=, rmir=\ER, 14590 rmso=\E_3, rmul=\E_3, sgr0=\E_3, smcup=\EO, smir=\EQ\EO, 14591 smso=\E_1, smul=\E_0, tbc=\E3, 14592sbi|superbee|beehive superbee at Indiana U., 14593 xsb, 14594 cr=\r$<1>, il1=1\EN\EL$<9>\EQ \EP$<9> \EO\ER\EA, 14595 use=sb1, 14596# Alternate (older) description of Superbee - f1=escape, f2=^C. 14597# Note: there are at least 3 kinds of superbees in the world. The sb1 14598# holds onto escapes and botches ^C's. The sb2 is the best of the 3. 14599# The sb3 puts garbage on the bottom of the screen when you scroll with 14600# the switch in the back set to CRLF instead of AEP. This description 14601# is tested on the sb2 but should work on all with either switch setting. 14602# The f1/f2 business is for the sb1 and the <xsb> can be taken out for 14603# the other two if you want to try to hit that tiny escape key. 14604# This description is tricky: being able to use cup depends on there being 14605# 2048 bytes of memory and the hairy <nl> string. 14606superbee-xsb|beehive super bee, 14607 am, da, db, xsb, 14608 cols#80, it#8, lines#25, 14609 clear=\EH\EJ$<3>, cnorm=^J, cr=\r$<1000>, cub1=^H, cud1=^J, 14610 cuf1=\EC, cup=\EF%p2%3d%p1%3d, cuu1=\EA$<3>, 14611 dch1=\EP$<3>, dl1=\EM$<100>, ed=\EJ$<3>, el=\EK$<3>, 14612 home=\EH, ht=^I, hts=\E1, 14613 ind=\n\0\0\0\n\0\0\0\EA\EK\0\0\0\ET\ET, is2=\EH\EJ, 14614 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ep, kf2=\Eq, 14615 kf3=\Er, kf4=\Es, kf5=\Et, kf6=\Eu, kf7=\Ev, kf8=\Ew, 14616 khome=\EH, rmso=\E_3, sgr0=\E_3, smso=\E_1, tbc=\E3, 14617# This loses on lines > 80 chars long, use at your own risk 14618superbeeic|super bee with insert char, 14619 ich1=, rmir=\ER, smir=\EQ, use=superbee-xsb, 14620sb2|sb3|fixed superbee, 14621 xsb@, use=superbee, 14622 14623#### Beehive Medical Electronics 14624# 14625# Steve Seymour <srseymour@mindspring.com> writes (Wed, 03 Feb 1999): 14626# Regarding your question though; Beehive terminals weren't made by Harris. 14627# They were made by Beehive Medical Electronics in Utah. They went out of 14628# business in the early '80s. 14629# 14630# (OK, then, I don't know why a couple of these say "harris beehive".) 14631# 14632 14633# Reports are that most of these Beehive entries (except superbee) have not 14634# been tested and do not work right. <rmso> is a trouble spot. Be warned. 14635 14636# (bee: <ich1> was empty, which is obviously bogus -- esr) 14637beehive|bee|harris beehive, 14638 OTbs, am, mir, 14639 cols#80, lines#24, 14640 cbt=\E>, clear=\EE, cub1=^H, cud1=\EB, cuf1=\EC, 14641 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 14642 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, kbs=^H, kcbt=\E>, 14643 kclr=\EE, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 14644 kdch1=\EP, kdl1=\EM, kel=\EK, khome=\EH, kich1=\EQ, kil1=\EL, 14645 krmir=\E@, rmir=\E@, rmso=\Ed@, rmul=\Ed@, sgr0=\Ed@, 14646 smir=\EQ, smso=\EdP, smul=\Ed`, 14647# set tab is ^F, clear (one) tab is ^V, no way to clear all tabs. 14648# good grief - does this entry make :sg:/:ug: when it doesn't have to? 14649# look at those spaces in <rmso>/<smso>. Seems strange to me... 14650# (beehive: <if=/usr/share/tabset/beehive> removed, no such file. If you 14651# really care, cook up one using ^F -- esr) 14652beehive3|bh3m|beehiveIIIm|harris beehive 3m, 14653 OTbs, am, 14654 cols#80, it#8, lines#20, 14655 bel=^G, clear=^E^R, cr=^M, cub1=^H, cud1=^J, cuf1=^L, cuu1=^K, 14656 dl1=\021$<350>, ed=^R, el=^P, home=^E, ht=^I, hts=^F, 14657 il1=\023$<160>, ind=^J, ll=^E^K, rmso=\s^_, smso=^]\s, 14658beehive4|bh4|beehive 4, 14659 am, 14660 cols#80, lines#24, 14661 bel=^G, clear=\EE, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, 14662 cuu1=\EA, ed=\EJ, el=\EK, home=\EH, ind=^J, 14663# There was an early Australian kit-built computer called a "Microbee". 14664# It's not clear whether this is for one of those or for a relative 14665# of the Beehive. 14666microb|microbee|micro bee series, 14667 OTbs, am, 14668 cols#80, it#8, lines#24, 14669 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 14670 cup=\EF%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 14671 el=\EK, ht=^I, ind=^J, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 14672 kcuu1=\EA, kf1=\Ep, kf2=\Eq, kf3=\Er, kf4=\Es, kf5=\Et, 14673 kf6=\Eu, kf7=\Ev, kf8=\Ew, kf9=\Ex, khome=\EH, rmso=\Ed@, 14674 rmul=\Ed@, sgr0=\Ed@, smso=\s\EdP, smul=\Ed`, 14675 14676# 8675, 8686, and bee from Cyrus Rahman 14677# (8675: changed k10, k11...k16 to k;, F1...F6 -- esr) 14678ha8675|harris 8675, 14679 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU, kf1=^F, 14680 kf10=\Ed, kf11=^W, kf12=\ER, kf13=\EE, kf14=\EI, kf15=\Ei, 14681 kf16=\Eg, kf2=^P, kf3=^N, kf4=^V, kf5=^J, kf6=^T, kf7=^H, 14682 kf8=\177, kf9=\Ee, use=bee, 14683# (8686: changed k10, k11...k16 to k;, F1...F6; fixed broken continuation 14684# in :is: -- esr) 14685ha8686|harris 8686, 14686 is2=\ES\E#\E*\Eh\Em\E?\E1\E9\E@\EX\EU\E"*Z01\E"8F35021B7C83#\E"8F45021B7D83#\E"8F55021B7E83#\E"8F65021B7F83#\E"8F75021B7383#\E"8F851BD7#\E"8F95021B7083#\E"8FA5021B7183#\E"8FB5021B7283#, 14687 kf1=\002\Ep\003, kf10=\Ej, kf11=\EW, kf12=\002\E{\003, 14688 kf13=\002\E|\003, kf14=\002\E}\003, kf15=\002\E~\003, 14689 kf16=\002\E\177\003, kf2=\002\Eq\003, kf3=\002\Er\003, 14690 kf4=\002\Es\003, kf5=\E3, kf6=\EI, kf7=\ER, kf8=\EJ, kf9=\E(, 14691 use=bee, 14692 14693#### Hazeltine 14694# 14695# Hazeltine appears to be out of the terminal business as of 1995. These 14696# guys were co-owners of the Terminal Brain Damage Hall Of Fame along with 14697# Harris. They have a hazeltine.com domain (but no web page there ) and can 14698# be reached at: 14699# 14700# Hazeltine 14701# 450 East Pulaski Road 14702# Greenlawn, New York 11740 14703# 14704# As late as 1993, manuals for the terminal product line could still be 14705# purchased from: 14706# 14707# TRW Customer Service Division 14708# 15 Law Drive 14709# P.O. Box 2076 14710# Fairfield, NJ 07007-2078 14711# 14712# They're now (1998) a subsidiary of General Electric, operating under the 14713# marque "GEC-Marconi Hazeltine" and doing military avionics. Web page 14714# at <http://www.gec.com/cpd/1ncpd.htm#1.55>. 14715# 14716 14717# Since <cuf1> is blank, when you want to erase something you 14718# are out of luck. You will have to do ^L's a lot to 14719# redraw the screen. h1000 is untested. It doesn't work in 14720# vi - this terminal is too dumb for even vi. (The code is 14721# there but it isn't debugged for this case.) 14722hz1000|hazeltine 1000, 14723 OTbs, 14724 cols#80, lines#12, 14725 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\s, home=^K, 14726 ind=^J, 14727# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 14728hz1420|hazeltine 1420, 14729 OTbs, am, 14730 cols#80, lines#24, 14731 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=^J, cuf1=^P, 14732 cup=\E\021%p2%c%p1%{32}%+%c, cuu1=\E^L, dl1=\E^S, 14733 ed=\E^X, el=\E^O, ht=^N, il1=\E^Z, ind=^J, rmso=\E^Y, 14734 smso=\E^_, 14735# New "safe" cursor movement (11/87) from <cgs@umd5.umd.edu>. Prevents 14736# freakout with out-of-range args and tn3270. No hz since it needs to 14737# receive tildes. 14738hz1500|hazeltine 1500, 14739 OTbs, am, hz, 14740 cols#80, lines#24, 14741 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 14742 cup=~\021%p2%p2%?%{30}%>%t%{32}%+%;%{96}%+%c%p1%{96}%+%c, 14743 cuu1=~^L, dl1=~\023$<40>, ed=~\030$<10>, el=~^O, home=~^R, 14744 il1=~\032$<40>, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^P, 14745 kcuu1=~^L, khome=~^R, rmso=~^Y, smso=~^_, 14746# h1510 assumed to be in sane escape mode. Else use h1500. 14747# (h1510: early versions of this entry apparently had "<rmso=\E^_>, 14748# <smso=\E^Y>, but these caps were commented out in 8.3; also, 14749# removed incorrect and overridden ":do=^J:" -- esr) 14750hz1510|hazeltine 1510, 14751 OTbs, am, 14752 cols#80, lines#24, 14753 bel=^G, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, cuf1=^P, 14754 cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, ed=\E^X, 14755 el=\E^O, il1=\E^Z, ind=^J, 14756# Hazeltine 1520 14757# The following switch settings are assumed for normal operation: 14758# FULL CR U/L_CASE ESCAPE 14759# FORMAT_OFF EOM_A_OFF EOM_B_OFF WRAPAROUND_ON 14760# Other switches may be set for operator convenience or communication 14761# requirements. 14762hz1520|Hazeltine 1520, 14763 OTbs, am, bw, msgr, 14764 cols#80, lines#24, 14765 bel=^G, bold=\E^_, clear=\E^\, cr=^M, cub1=^H, cud1=^J, 14766 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, 14767 ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, kbs=^H, 14768 kclr=\E^\, kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, 14769 kdl1=\E^S, ked=\E^X, kel=\E^O, khome=\E^R, kil1=\E^Z, 14770 rmso=\E^Y, rs1=\E$\E\005\E?\E\031, sgr0=\E^Y, smso=\E^_, 14771# This version works with the escape switch off 14772# (h1520: removed incorrect and overridden ":do=^J:" -- esr) 14773hz1520-noesc|hazeltine 1520, 14774 am, hz, 14775 cols#80, lines#24, 14776 bel=^G, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 14777 cup=~\021%p2%c%p1%c$<1>, cuu1=~^L, dl1=~^S, ed=~^X, el=~^O, 14778 home=~^R, il1=~^Z, ind=^J, rmso=~^Y, smso=~^_, 14779# Note: the h1552 appears to be the first Hazeltine terminal which 14780# is not braindamaged. It has tildes and backprimes and everything! 14781# Be sure the auto lf/cr switch is set to cr. 14782hz1552|hazeltine 1552, 14783 OTbs, 14784 cud1=^J, dl1=\EO, il1=\EE, kf1=\EP, kf2=\EQ, kf3=\ER, lf1=blue, 14785 lf2=red, lf3=green, use=vt52, 14786hz1552-rv|hazeltine 1552 reverse video, 14787 cud1=^J, rmso=\ET, smso=\ES, use=hz1552, 14788# Note: h2000 won't work well because of a clash between upper case and ~'s. 14789hz2000|hazeltine 2000, 14790 OTbs, OTnc, am, 14791 cols#74, lines#27, 14792 bel=^G, clear=~\034$<6>, cub1=^H, cud1=^J, 14793 cup=~\021%p2%c%p1%c, dl1=~\023$<6>, home=~^R, 14794 il1=~\032$<6>, ind=^J, pad=\177, 14795# Date: Fri Jul 23 10:27:53 1982. Some unknown person wrote: 14796# I tested this termcap entry for the Hazeltine Esprit with vi. It seems 14797# to work ok. There is one problem though if one types a lot of garbage 14798# characters very fast vi seems not able to keep up and hangs while trying 14799# to insert. That's in insert mode while trying to insert in the middle of 14800# a line. It might be because the Esprit doesn't have insert char and delete 14801# char as a built in function. Vi has to delete to end of line and then 14802# redraw the rest of the line. 14803esprit|Hazeltine Esprit I, 14804 OTbs, am, bw, 14805 cols#80, lines#24, 14806 bel=^G, cbt=\E^T, clear=\E^\, cr=^M, cub1=^H, cud1=\E^K, 14807 cuf1=^P, cup=\E\021%p2%c%p1%c, cuu1=\E^L, dl1=\E^S, 14808 ed=\E^W, el=\E^O, home=\E^R, il1=\E^Z, ind=^J, is2=\E?, kbs=^H, 14809 kcub1=^H, kcud1=\E^K, kcuf1=^P, kcuu1=\E^L, kf0=^B0^J, 14810 kf1=^B1^J, kf2=^B2^J, kf3=^B3^J, kf4=^B4^J, kf5=^B5^J, 14811 kf6=^B6^J, kf7=^B7^J, kf8=^B8^J, kf9=^B9^J, khome=\E^R, 14812 lf0=0, lf1=1, lf2=2, lf3=3, lf4=4, lf5=5, lf6=6, lf7=7, lf8=8, lf9=9, 14813 rmkx=\E>, rmso=\E^Y, smkx=\E<, smso=\E^_, 14814esprit-am|hazeltine esprit auto-margin, 14815 am, use=esprit, 14816# Hazeltine Modular-1 from Cliff Shackelton <ittvax!ittral!shackelt> via BRL 14817# Vi it seems always wants to send a control J for "do" and it turned out 14818# that the terminal would work somewhat if the auto LF/CR was turned off. 14819# (hmod1: removed :dn=~^K: -- esr) 14820hmod1|Hazeltine Modular 1, 14821 OTbs, am, hz, 14822 cols#80, lines#24, 14823 bel=^G, cbt=~^T, clear=~^\, cr=^M, cub1=^H, cud1=~^K, cuf1=^P, 14824 cup=~\021%p2%c%p1%c, cuu1=~^L, dl1=~^S, home=~^R, il1=~^Z, 14825 ind=^J, kcub1=^H, kcud1=~^K, kcuf1=^P, kcuu1=~^L, khome=~^R, 14826 rc=~^Q, rmso=~^Y, sc=~^E, sgr0=~^Y, smso=~^_, 14827# 14828# Hazeltine Executive 80 Model 30 (1554?) 14829# from Will Martin <control@ALMSA-1.ARPA> via BRL 14830# Like VT100, except for different "am" behavior. 14831hazel|exec80|h80|he80|Hazeltine Executive 80, 14832 OTbs, OTpt, am, 14833 cols#80, it#8, lines#24, vt#3, 14834 OTnl=^J, bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 14835 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 14836 cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 14837 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 14838 ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, ht=^I, 14839 is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, kcud1=\EOB, 14840 kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 14841 kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, 14842 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, 14843 rmkx=\E[?1l\E>, rmso=\E[m$<2/>, rmul=\E[m$<2/>, 14844 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 14845 sgr0=\E[m$<2/>, smkx=\E[?1h\E=, smso=\E[7m$<2/>, 14846 smul=\E[4m$<2/>, 14847 14848#### IBM 14849# 14850 14851ibm327x|line mode IBM 3270 style, 14852 gn, 14853 clear=^M^J, el=^M, home=^M, 14854 14855ibm3101|i3101|IBM 3101-10, 14856 OTbs, am, xon, 14857 cols#80, lines#24, 14858 bel=^G, clear=\EK, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 14859 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 14860 el=\EI, home=\EH, hts=\E0, ind=^J, kcub1=\ED, kcud1=\EB, 14861 kcuf1=\EC, kcuu1=\EA, nel=^M^J, tbc=\EH, 14862ibm3151|IBM 3151 display, 14863 is2=\E S, rmacs=\E>B, rmcup=\E>B, rs2=\E S, s0ds=\E>B, 14864 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E>B%;, 14865 sgr0=\E4@\E>B, smacs=\E>A, smcup=\E>B, use=ibm3162, 14866# From: Mark Easter <marke@fsi-ssd.csg.ssd.fsi.com> 29 Oct 1992 14867# removed kend, knp, kpp -TD 14868ibm3161|ibm3163|wy60-316X|wyse60-316X|IBM 3161/3163 display, 14869 OTbs, am, mir, msgr, 14870 cols#80, it#8, lines#24, 14871 acsc=j\352k\353l\354m\355n\356q\361t\364u\365v\366w\367x\370, 14872 bel=^G, blink=\E4D, bold=\E4H, clear=\EH\EJ, cr=^M, cub1=\ED, 14873 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 14874 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, ind=^J, 14875 invis=\E4P, kbs=^H, kcbt=\E2, kclr=\EL\r, kctab=\E1, 14876 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\EQ, 14877 kdl1=\EO, ked=\EJ, kel=\EI, kf1=\Ea\r, kf10=\Ej\r, 14878 kf11=\Ek\r, kf12=\El\r, kf13=\E!a\r, kf14=\E!b\r, 14879 kf15=\E!c\r, kf16=\E!d\r, kf17=\E!e\r, kf18=\E!f\r, 14880 kf19=\E!g\r, kf2=\Eb\r, kf20=\E!h\r, kf21=\E!i\r, 14881 kf22=\E!j\r, kf23=\E!k\r, kf24=\E!l\r, kf3=\Ec\r, 14882 kf4=\Ed\r, kf5=\Ee\r, kf6=\Ef\r, kf7=\Eg\r, kf8=\Eh\r, 14883 kf9=\Ei\r, khome=\EH, khts=\E0, kich1=\EP \010, kil1=\EN, 14884 ktbc=\E 1, mc4=^P^T, mc5=^P^R, rev=\E4A, rmcup=\E>A, 14885 rmso=\E4@, rmul=\E4@, 14886 sgr=\E4%{64}%?%p1%t%{65}%|%;%?%p2%t%{66}%|%;%?%p3%t%{65}%|%;%?%p4%t%{68}%|%;%?%p5%t%{64}%|%;%?%p6%t%{72}%|%;%?%p7%t%{80}%|%;%c%?%p9%t\E>A%e\E<@%;, 14887 sgr0=\E4@\E<@, smcup=\E>A, smso=\E4A, smul=\E4B, 14888 14889ibm3161-C|IBM 3161-C NLS terminal using cartridge, 14890 rmcup=\E>B, s0ds=\E>B, s1ds=\E>A, smcup=\E>B, use=ibm3161, 14891ibm3162|IBM 3162 display, 14892 blink=\E4$a, bold=\E4(a, il1=\EN, invis=\E40a, rev=\E4!a, 14893 rmso=\E4>b, rmul=\E4=b, sgr0=\E4@, smso=\E4!a, smul=\E4"a, 14894 use=ibm3161-C, 14895 14896# This really should not use setab/setaf, but it is clear that the 14897# original terminfo does not toggle red/blue colors as in setb/setf. 14898ibm3164|i3164|IBM 3164, 14899 msgr, 14900 colors#8, pairs#64, 14901 op=\E4 "@, rmcup=\E!9(N\E>B, s0ds=\E>B, s1ds=\E>A, 14902 setab=\E4 %p1%{64}%+%c, 14903 setaf=\E4%?%p1%t %p1%{32}%+%c%e!'%;@, 14904 smcup=\E!9/N\E>B, use=ibm3161, 14905 14906ibm5151|wy60-AT|wyse60-AT|IBM 5151 Monochrome display, 14907 am, bw, msgr, xon, 14908 cols#80, it#8, lines#25, 14909 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 14910 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 14911 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 14912 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 14913 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, 14914 dl1=\E[M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, 14915 hpa=\E[%i%p1%dG, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 14916 indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, kbs=^H, kcbt=\E[Z, 14917 kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 14918 kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, kel=\E[142q, 14919 kend=\E[146q, kf1=\E[001q, kf10=\E[010q, kf11=\E[011q, 14920 kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, kf15=\E[015q, 14921 kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, kf19=\E[019q, 14922 kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, kf22=\E[022q, 14923 kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, kf26=\E[026q, 14924 kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, kf3=\E[003q, 14925 kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, kf33=\E[033q, 14926 kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, kf4=\E[004q, 14927 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, 14928 kf9=\E[009q, khome=\E[H, kich1=\E[139q, kil1=\E[140q, 14929 kind=\E[151q, knp=\E[154q, kpp=\E[150q, kri=\E[155q, 14930 krmir=\E[4l, rev=\E[7m, ri=\E[T, rin=\E[%p1%dT, rmir=\E[4l, 14931 rmso=\E[m, rmul=\E[m, rs2=\Ec, 14932 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m, 14933 sgr0=\E[0m, smir=\E[4h, smso=\E[7m, smul=\E[4m, 14934 14935ibmaed|IBM Experimental display, 14936 OTbs, am, eo, msgr, 14937 cols#80, it#8, lines#52, 14938 clear=\EH\EK, cub1=^H, cud1=\EB, cuf1=\EC, 14939 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 14940 dl1=\EO, ed=\EJ, el=\EI, flash=\EG, home=\EH, ht=^I, ich1=\EP, 14941 il1=\EN, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 14942 rmso=\E0, sgr0=\E0, smso=\E0, 14943ibm-apl|apl|IBM apl terminal simulator, 14944 lines#25, use=dm1520, 14945# (ibmmono: this had an unknown `sb' boolean, I changed it to `bs'. 14946# Also it had ":I0=f10:" which pretty obviously should be "l0=f10" -- esr) 14947ibmmono|IBM workstation monochrome, 14948 eslok, hs, 14949 bold=\EZ, dl1=\EM, dsl=\Ej\EY8 \EI\Ek, fsl=\Ek, il1=\EL, 14950 invis=\EF\Ef0;\Eb0;, kbs=^H, kf0=\E<, kf1=\ES, kf2=\ET, 14951 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EY, 14952 khome=\EH, kich1=\0, kind=\EE, knp=\EE, kpp=\Eg, kri=\EG, 14953 lf0=f10, rev=\Ep, ri=\EA, rmso=\Ez, rmul=\Ew, 14954 sgr0=\Ew\Eq\Ez\EB, smso=\EZ, smul=\EW, tsl=\Ej\EY8%+ \Eo, 14955 use=ibm3101, 14956ibmega|IBM Enhanced Color Display, 14957 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 14958 nel=^M^J, use=ibmmono, 14959# This color scheme is assumed in some recent IBM terminal descriptions 14960# (green on black, emulated on a 16-color terminal). 14961ibm+color|IBM color definitions, 14962 colors#8, ncv#3, pairs#64, 14963 op=\E[32m\E[40m, 14964 setb=\E[%?%p1%{0}%=%t40m%e%p1%{1}%=%t41m%e%p1%{2}%=%t42m%e%p1%{3}%=%t43m%e%p1%{4}%=%t44m%e%p1%{5}%=%t45m%e%p1%{6}%=%t46m%e%p1%{7}%=%t107m%;, 14965 setf=\E[%?%p1%{0}%=%t30m%e%p1%{1}%=%t31m%e%p1%{2}%=%t32m%e%p1%{3}%=%t33m%e%p1%{4}%=%t34m%e%p1%{5}%=%t35m%e%p1%{6}%=%t36m%e%p1%{7}%=%t97m%;, 14966ibm+16color|IBM aixterm color definitions, 14967 colors#16, pairs#256, 14968 setab=\E[%?%p1%{8}%<%t%p1%{40}%+%e%p1%{92}%+%;%dm, 14969 setaf=\E[%?%p1%{8}%<%t%p1%{30}%+%e%p1%{82}%+%;%dm, 14970 setb=%p1%{8}%/%{6}%*%{4}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, 14971 setf=%p1%{8}%/%{6}%*%{3}%+\E[%d%p1%{8}%m%Pa%?%ga%{1}%=%t4%e%ga%{3}%=%t6%e%ga%{4}%=%t1%e%ga%{6}%=%t3%e%ga%d%;m, 14972ibm5154|IBM 5154 Color display, 14973 colors#8, ncv@, pairs#64, 14974 bold@, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, 14975 use=ibm+color, 14976ibmega-c|ibm5154-c|IBM Enhanced Color Display with standout and underline, 14977 rmso=\EB, rmul=\EB, smso=\EF\Ef3;, smul=\EF\Ef2;, 14978 use=ibmmono, 14979ibmvga-c|IBM VGA display color termcap, 14980 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 14981 nel=^M^J, use=ibmega-c, 14982ibmvga|IBM VGA display, 14983 cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, 14984 nel=^M^J, use=ibmega, 14985# ibmapa* and ibmmono entries come from ACIS 4.3 distribution 14986rtpc|ibmapa16|IBM 6155 Extended Monochrome Graphics Display, 14987 lines#32, 14988 dsl=\Ej\EY@ \EI\Ek, tsl=\Ej\EY@%+ \Eo, use=ibmmono, 14989ibm6155|IBM 6155 Black & White display, 14990 blink@, bold@, use=ibm5151, 14991# Advanced Monochrome (6153) and Color (6154) Graphics Display: 14992ibmapa8c|ibmapa8|IBM 6154 Advanced Graphics Display, 14993 lines#31, 14994 dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, use=ibmmono, 14995ibmapa8c-c|ibm6154-c|IBM 6154 Advanced Color Graphics Display, 14996 lines#31, 14997 dim=\EF\Ef7;, dsl=\Ej\EY? \EI\Ek, tsl=\Ej\EY?%+ \Eo, 14998 use=ibmega-c, 14999ibm6154|IBM 6154 Color displays, 15000 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, 15001 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m, 15002 sgr0=\E[0;10m, use=ibm5154, 15003ibm6153|IBM 6153 Black & White display, 15004 blink@, bold=\E[12m, s0ds=\E[10m, s1ds=\E[11m, s2ds=\E[12m, 15005 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;12%;m, 15006 sgr0=\E[0;10m, use=ibm5151, 15007ibm6153-90|IBM 6153 Black & White display, 15008 cols#90, lines#36, 15009 blink@, bold@, use=ibm5151, 15010ibm6153-40|IBM 6153 Black & White display, 15011 cols#40, lines#12, use=ibm6153-90, 15012ibm8512|ibm8513|IBM color VGA Terminal, 15013 am, mir, msgr, 15014 cols#80, it#8, lines#25, 15015 acsc=jjkkllmmnnqqttuuvvwwxx, blink=\E[5m, bold=\E[1m, 15016 clear=\E[H\E[J, cub1=\E[D, cud1=^J, cuf1=\E[C, 15017 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dl=\E[%p1%dM, dl1=\E[M, 15018 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, il=\E[%p1%dL, 15019 il1=\E[L, is2=\Eb\E[m\017\E[?7h, kcud1=\E[B, kcuu1=\E[A, 15020 kf0=\E[010q, kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, 15021 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 15022 kf8=\E[008q, kf9=\E[009q, khome=\E[H, rc=\E[u, rev=\E[7m, 15023 rmacs=^O, rmam=\E[?7l, rmcup=\E[20h, rmdc=\E[4l, 15024 rmir=\E[4l, rmso=\E[m, rmul=\E[m, 15025 rs1=\Eb\E[m\017\E[?7h\E[H\E[J, sc=\E[s, sgr0=\E[m, 15026 smacs=^N, smam=\E[?7h, smcup=\E[20;4l\E[?7h\Eb, 15027 smdc=\E[4h, smir=\E[4h, smso=\E[7m, smul=\E[4m, 15028 use=ibm8503, 15029hft-c|HFT with Color, 15030 colors#8, pairs#64, 15031 acsc=jjkkllmmnnqqttuuvvwwxx, s0ds=\E(B, s1ds=\E(0, 15032 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[0m\E(B, 15033 use=ibm5151, use=ibm+color, 15034hft-c-old|HFT with Color PC850, 15035 colors#8, pairs#64, 15036 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, use=ibm5151, 15037 use=ibm+color, 15038hft-old|AIWS High Function Terminal, 15039 am, xon, 15040 cols#80, lines#25, 15041 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 15042 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 15043 cuu1=\E[A, dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 15044 ht=^I, ich1=\E[@, il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, 15045 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 15046 kf1=\E[001q, kf2=\E[002q, kf3=\E[003q, kf4=\E[004q, 15047 kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, kf8=\E[008q, 15048 kf9=\E[009q, khome=\E[H, knp=\E[153q, kpp=\E[159q, 15049 ktbc=\E[010q, rev=\E[7m, rmir=\E6, rmso=\E[m, rmul=\E[m, 15050 sgr0=\E[m, smir=\E6, smso=\E[7m, smul=\E[4m, use=ibm+color, 15051ibm-system1|system1|ibm system/1 computer, 15052 am, xt, 15053 cols#80, lines#24, 15054 bel=^G, clear=^Z, cub1=^H, cuf1=^\, 15055 cup=\005%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, home=^K, 15056 ind=^J, 15057# lft-pc850 : IBM Low Function Terminal Device 15058# lft "supports" underline, bold, and blink in the sense that the lft code 15059# sets all the right bits. HOWEVER, depending upon the adapter, these 15060# attributes may or may not be supported by the device driver. 15061lft|lft-pc850|LFT-PC850|IBM LFT PC850 Device, 15062 am, bw, msgr, xon, 15063 cols#80, it#8, lines#25, 15064 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 15065 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 15066 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 15067 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 15068 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 15069 dl=\E[%p1%dM, dl1=\E[M, ech=\E[%p1%dX, ed=\E[2J, el=\E[0K, 15070 home=\E[H, hpa=\E[%i%p1%dG, ich=\E[%p1%d@, il=\E[%p1%dL, 15071 il1=\E[L, ind=\ED, indn=\E[%p1%dS, invis=\E[8m, is2=\Ec, 15072 kbs=^H, kcbt=\E[Z, kclr=\E[144q, kcub1=\E[D, kcud1=\E[B, 15073 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, ked=\E[148q, 15074 kel=\E[142q, kend=\E[146q, kf1=\E[001q, kf10=\E[010q, 15075 kf11=\E[011q, kf12=\E[012q, kf13=\E[013q, kf14=\E[014q, 15076 kf15=\E[015q, kf16=\E[016q, kf17=\E[017q, kf18=\E[018q, 15077 kf19=\E[019q, kf2=\E[002q, kf20=\E[020q, kf21=\E[021q, 15078 kf22=\E[022q, kf23=\E[023q, kf24=\E[024q, kf25=\E[025q, 15079 kf26=\E[026q, kf27=\E[027q, kf28=\E[028q, kf29=\E[029q, 15080 kf3=\E[003q, kf30=\E[030q, kf31=\E[031q, kf32=\E[032q, 15081 kf33=\E[033q, kf34=\E[034q, kf35=\E[035q, kf36=\E[036q, 15082 kf4=\E[004q, kf5=\E[005q, kf6=\E[006q, kf7=\E[007q, 15083 kf8=\E[008q, kf9=\E[009q, khome=\E[H, kich1=\E[139q, 15084 kil1=\E[140q, kind=\E[151q, knp=\E[154q, kpp=\E[150q, 15085 kri=\E[155q, krmir=\E[4l, rev=\E[7m, ri=\EL, rin=\E[%p1%dT, 15086 rmacs=\E(B, rmir=\E[4l, rmso=\E[0m, rmul=\E[0m, rs2=\Ec, 15087 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 15088 sgr0=\E[0m, smacs=\E(0, smir=\E[4h, smso=\E[7m, smul=\E[4m, 15089 tbc=\E[3g, 15090# "Megapel" refers to the display adapter, which was used with the IBM RT 15091# aka IBM 6150. 15092ibm5081|hft|IBM Megapel Color display, 15093 acsc=jjkkllmmnnqqttuuvvwwxx, blink@, bold@, s0ds=\E(B, 15094 s1ds=\E(0, sgr0=\E[0m\E(B, use=ibm5154, 15095ibm5081-c|ibmmpel-c|IBM 5081 1024x1024 256/4096 Megapel enhanced color display, 15096 eslok, hs, 15097 lines#33, 15098 dsl=\Ej\EYA \EI\Ek, fsl=\Ek, tsl=\Ej\EYA%+ \Eo, 15099 use=ibmega-c, 15100ibm8503|ibm8507|ibm8604|IBM 8503 B & W VGA display, 15101 use=hft-c, 15102ibm8514|IBM 8514/a color VGA display, 15103 eslok, hs, 15104 dsl=\Ej\EYI \EI\Ek, fsl=\Ek, tsl=\Ej\EYI%+ \Eo, use=hft, 15105ibm8514-c|IBM 8514 color display with standout and underline, 15106 eslok, hs, 15107 lines#41, 15108 cr=^M, cud1=^J, dsl=\Ej\EYI \EI\Ek, fsl=\Ek, ht=^I, ind=^J, 15109 kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, tsl=\Ej\EYI%+ \Eo, 15110 use=ibmega-c, 15111 15112# 15113# AIX entries. IBM ships these with AIX 3.2.5. 15114# -- added rc, sc based on manpage -TD 15115# Note that we could use ibm+16color, but that is not how IBM defines this one. 15116aixterm|IBM Aixterm Terminal Emulator, 15117 eslok, hs, 15118 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E, 15119 fsl=\E[?F, rc=\E8, ri@, s0ds=\E(B, s1ds=\E(0, sc=\E7, 15120 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t;8%;m%?%p9%t\E(0%e\E(B%;, 15121 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6154, 15122aixterm-m|IBM AIXterm Monochrome Terminal Emulator, 15123 eslok, hs, 15124 acsc=jjkkllmmnnqqttuuvvwwxx, bold=\E[1m, dsl=\E[?E, 15125 fsl=\E[?F, ri@, s0ds=\E(B, s1ds=\E(0, 15126 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 15127 sgr0=\E[0;10m\E(B, tsl=\E[?%p1%dT, use=ibm6153, 15128aixterm-m-old|old IBM AIXterm Monochrome Terminal Emulator, 15129 eslok, hs, 15130 bold=\E[1m, dsl=\E[?E, fsl=\E[?F, ri@, 15131 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m, 15132 tsl=\E[?%p1%dT, use=ibm6153, 15133jaixterm|IBM Kanji Aixterm Terminal Eemulator, 15134 acsc@, use=aixterm, 15135jaixterm-m|IBM Kanji AIXterm Monochrome Terminal Emulator, 15136 acsc@, use=aixterm-m, 15137 15138# This flavor is adapted from xterm, in turn from aixterm documentation -TD 15139aixterm-16color|IBM Aixterm Terminal Emulator with 16 colors, 15140 use=ibm+16color, use=aixterm, 15141 15142#### Infoton/General Terminal Corp. 15143# 15144 15145# gt100 sounds like something DEC would come out with. Let's hope they don't. 15146i100|gt100|gt100a|General Terminal 100A (formerly Infoton 100), 15147 OTbs, am, 15148 cols#80, lines#24, 15149 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 15150 cup=\Ef%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dl1=\EM, 15151 ed=\EJ, el=\EK, flash=\Eb$<200/>\Ea, home=\EH, il1=\EL, 15152 ind=^J, rmso=\Ea, smso=\Eb, 15153i400|infoton 400, 15154 OTbs, am, 15155 cols#80, lines#25, 15156 bel=^G, clear=\E[2J, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 15157 cup=\E[%i%p1%3d;%p2%3dH, cuu1=\E[A, 15158 dch1=\E[4h\E[2Q\E[P\E[4l\E[0Q, dl1=\E[M, el=\E[N, 15159 il1=\E[L, ind=^J, rmir=\E[4l\E[0Q, smir=\E[4h\E[2Q, 15160# (addrinfo: removed obsolete ":bc=^Z:" -- esr) 15161addrinfo, 15162 am, 15163 cols#80, lines#24, 15164 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, 15165 cup=\037%p1%c%p2%c, cuu1=^\, ed=^K, home=^H, ind=^J, ll=^H^\, 15166# (infoton: used to have the no-ops <lh#0>, <lw#0>, <nlab#0> -- esr) 15167infoton, 15168 am, 15169 cols#80, lines#24, 15170 bel=^G, clear=^L, cr=^M, cub1=^Z, cud1=^J, cuf1=^Y, cuu1=^\, 15171 ed=^K, ind=^J, ll=^H^\, 15172 15173# The ICL6402 was actually the Kokusai Display System 6402. 15174# The 6404 was the KDS7372 (color version of the 6402). 15175# 15176# ICL6404 control codes follow: 15177# 15178#code function 15179#~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 15180#ctrl-A set SOM position at cursor position 15181#ctrl-G Bell 15182#ctrl-H Backspace 15183#ctrl-I Horiz tab 15184#ctrl-J Linefeed 15185#ctrl-K Cursor up 15186#ctrl-L Cursor right 15187#ctrl-M Carriage return 15188#ctrl-N Disable xon/xoff to host 15189#ctrl-O Enable xon/xoff to host 15190#ctrl-R Enable bidirectional mode 15191#ctrl-T Disable bidirectional mode 15192#ctrl-V Cursor down 15193#ctrl-Z Clear unprotected data to insert char 15194#ctrl-^ Cursor home 15195#ctrl-_ Newline 15196# 15197#ESC lead-in char for multiple character command 15198# 15199#ESC space R execute power on sequence 15200#ESC ! p1 p2 define scroll region: 15201# p1 = scroll top line: 20h - 37h 15202# p1 = scroll bottom line: 20h - 37h 15203#ESC " unlock keyboard 15204#ESC # lock keyboard 15205#ESC $ Semi-graphics mode on 15206#ESC % Semi-graphics mode off 15207#ESC & protect mode on 15208#ESC ' protect mode off 15209#ESC ( write protect mode off (full intensity) 15210#ESC ) write protect mode on (half intensity) 15211# 15212#ESC * clear screen 15213#ESC + clear unprotected data to insert char 15214#ESC , clear unprotected data to half intensity spaces 15215#ESC - p1 p2 p3 p4 address cursor to page, row, column: 15216# p1 = page number 0 - 3 15217# p2 = row 20h - 7fh 15218# p3 = column (lo) 20h - 7fh 15219# p4 = column (hi) 20h - 21h (only 132 col) 15220#ESC . p1 set cursor style: 15221# p1 = 0 invisible cursor 15222# p1 = 1 block blinking cursor 15223# p1 = 2 block steady cursor 15224# p1 = 3 underline blinking cursor 15225# p1 = 4 underline steady cursor 15226#ESC / transmit cursor location (page, row, column) 15227#ESC 0 p1 p2 p3 p4 program edit key: 15228# p1 = edit key code: '@'-'S', '`'-'s' 15229# p2 p3 p4 = program data (3 bytes) 15230# 15231#ESC 1 set tab 15232#ESC 2 clear tab at cursor 15233#ESC 3 clear all tabs 15234#ESC 4 send unprotect line to cursor 15235#ESC 5 send unprotect page to cursor 15236#ESC 6 send line to cursor 15237#ESC 7 send page to cursor 15238#ESC 8 n set scroll mode: 15239# n = 0 set jump scroll 15240# n = 1 set smooth scroll 15241#ESC 9 n control display: 15242# n = 0 display off 15243# n = 1 display on 15244#ESC : clear unprotected data to null 15245#ESC ; clear unprotected data to insert char 15246# 15247#ESC < keyclick on 15248#ESC = p1 p2 address cursor to row, column 15249# p1 = row 20h - 7fh 15250# p2 = column (lo) 20h - 7fh 15251# p3 = column (hi) 20h - 21h (only 132 col) 15252#ESC > keyclick off 15253#ESC ? transmit cursor location (row, column) 15254# 15255#ESC @ copy print mode on 15256#ESC A copy print mode off 15257#ESC B block mode on 15258#ESC C block mode off (conversation mode) 15259#ESC D F set full duplex 15260#ESC D H set half duplex 15261#ESC E line insert 15262#ESC F p1 p2 set page colour (p1 = f/grnd, p2 = b/grnd) 15263# 0 = black, 1 = red, 2 = green, 3 = yellow 15264# 4 = blue, 5 = magenta, 6 = cyan, 7 = white 15265#ESC G n set serial field attribute (n = 30h - 3Fh) 15266#ESC H n full graphics mode: 15267# n = 0 exit full graphics mode 15268# n = 1 enter full graphics mode 15269#ESC I back tab 15270#ESC J back page 15271#ESC K forward page 15272# 15273#ESC L unformatted page print 15274#ESC M L move window left (132 col mode only) 15275#ESC M R move window right (132 col mode only) 15276#ESC N set page edit (clear line edit) 15277#ESC O set line edit (clear page edit) 15278#ESC P formatted page print 15279#ESC Q character insert 15280#ESC R line delete 15281#ESC S send message unprotected only 15282#ESC T erase line to insert char 15283#ESC U set monitor mode (see ESC X, ESC u) 15284# 15285#ESC V n select video attribute mode: 15286# n = 0 serial field attribute mode 15287# n = 1 parallel character attribute mode 15288#ESC V 2 n define line attribute: 15289# n = 0 single width single height 15290# n = 1 single width double height 15291# n = 2 double width single height 15292# n = 3 double width double height 15293#ESC V 3 n select character font: 15294# n = 0 system font 15295# n = 1 user defined font 15296#ESC V 4 n select screen mode: 15297# n = 0 page screen mode 15298# n = 1 virtual screen mode 15299#ESC V 5 n control mouse mode: 15300# n = 0 disable mouse 15301# n = 1 enable sample mode 15302# n = 2 send mouse information 15303# n = 3 enable request mode 15304#ESC W character delete 15305#ESC X clear monitor mode (see ESC U, ESC u) 15306#ESC Y erase page to insert char 15307# 15308#ESC Z n send user/status line: 15309# n = 0 send user line 15310# n = 1 send status line 15311# n = 2 send terminal ID 15312#ESC [ p1 p2 p3 set character attribute (parallel char mode): 15313# p1: 0 = normal 15314# 1 = blank 15315# 2 = blink 15316# 3 = blink blank (= blank) 15317# 4 = reverse 15318# 5 = reverse blank 15319# 6 = reverse blink 15320# 7 = reverse blink blank (= reverse blank) 15321# 8 = underline 15322# 9 = underline blank 15323# : = underline blink 15324# ; = underline blink blank 15325# < = reverse underline 15326# = = reverse underline blank 15327# > = reverse underline blink 15328# ? = reverse underline blink blank 15329# p2, p3: f/grnd, b/grnd colour 15330# (see ESC F for colours) 15331# use ZZ for mono, eg. 15332# ESC [ 0 Z Z for normal 15333# ESC [ 4 Z Z for inverse etc. 15334# 15335#ESC \ n set page size: 15336# n = 1 24 lines/page 15337# n = 2 48 lines/page 15338# n = 3 72 lines/page 15339# n = 4 96 lines/page 15340#ESC ] n set Wordstar mode: 15341# n = 0 normal (KDS7372) mode 15342# n = 1 Wordstar mode 15343# 15344#ESC b set foreground colour screen 15345# 15346#ESC c n enter self-test mode: 15347# n = 0 exit self test mode 15348# n = 1 ROM test 15349# n = 2 RAM test 15350# n = 3 NVRAM test 15351# n = 4 screen display test 15352# n = 5 main/printer port test 15353# n = 6 mouse port test 15354# n = 7 graphics board test 15355# n = 8 graphics memory test 15356# n = 9 display all 'E' 15357# n = : display all 'H' 15358#ESC d set background colour screen 15359# 15360#ESC e n program insert char (n = insert char) 15361#ESC f text CR load user status line with 'text' 15362# 15363#ESC g display user status line on 25th line 15364#ESC h display system status line on 25th line 15365#ESC i tab 15366#ESC j reverse linefeed 15367#ESC k n duplex/local edit mode: 15368# n = 0 duplex edit mode 15369# n = 1 local edit mode 15370#ESC l n select virtual screen: 15371# n = 0 screen 1 15372# n = 1 screen 2 15373#ESC m save current config to NVRAM 15374#ESC n p1 select display screen: 15375# p1 = 0 screen 1 15376# p1 = 1 screen 2 15377# p1 = 2 screen 3 15378# p1 = 3 screen 4 15379#ESC o p1 p2 set characters/line and attribute: 15380# p1 = 0 80 chars/line 15381# 15382#ESC o p1 p2 set characters/line and attribute: 15383# p1 = 0 80 chars/line 15384# p1 = 1 132 chars/line 15385# p2 = 0 single width single height 15386# p2 = 1 single width double height 15387# p2 = 2 double width single height 15388# p2 = 3 double width double height 15389# 15390#ESC q insert mode on 15391#ESC r edit mode on 15392#ESC s send message all 15393#ESC t erase line to null 15394#ESC u clear monitor mode (see ESC U, ESC X) 15395#ESC v autopage mode on 15396#ESC w autopage mode off 15397#ESC x p1 p2 p3 define delimiter code... 15398#ESC y erase page to null 15399# 15400#ESC z 2 p1 p2 p3 p4 draw quadrangle: 15401# p1 = starting row 15402# p2 = starting column 15403# p3 = end row 15404# p4 = end column 15405# 15406#ESC { p1 p2 p3 p4 configure main port 15407# (baud, stop bits, parity, word length) 15408# 15409#ESC | p1 p2 text Ctrl-Y program function key with 'text': 15410# p1 = function key code: 15411# '1' - ';' normal f1- f11 15412# '<' - 'F' shifted f1 - f11 15413# p2 = program mode: 15414# 1 = FDX 15415# 2 = LOC 15416# 3 = HDX 15417# Ctrl-Y = terminator 15418# (use Ctrl-P to escape ^P, ^Y ) 15419# 15420#ESC } p1 p2 p3 p4 configure printer port 15421# (baud, stop bits, parity, word length) 15422#ESC ~ send system status 15423# 15424# Codes and info from Peter Disdale <pete@pdlmail.demon.co.uk> 12 May 1997 15425# 15426# Entry is by esr going solely on above information and is UNTESTED. 15427# This actually looks a lot like a Televideo 9xx. 15428# This entry uses page 0 and is monochrome; I'm not brave enough to try 15429# to make color work without a test terminal. The <am> capability is a guess. 15430# The initialization string sets conversation mode, blinking underline cursor, 15431# full duplex, parallel attribute mode, display user status line, white 15432# foreground, black background, normal highlight. 15433# 15434icl6404|kds7372|icl6402|kds6402|ICL 6404 aka Kokusai Display Systems 7372, 15435 OTbs, am, hs, 15436 cols#80, lines#24, 15437 bel=^G, blink=\E[2ZZ, cbt=\EI, civis=\E.0, clear=\E*, 15438 cnorm=\E.3, cr=^M, 15439 csr=\E!%+%p1%{32}%+%p2%{32} cud1=\026, cuf1=^L, 15440 cup=\E=%p1%{32}%+%c%p2%{80}%m%{32}%+%c%p2%{80}%>%{32}%+%c, 15441 cuu1=^K, cvvis=\E.1, dch1=\EW, dl1=\ER, home=^^, ht=^I, 15442 hts=\E1, il1=\EE, invis=\E[1ZZ, 15443 is1=\EC\E.3\EDF\EV1\Eg\E[0ZZ, nel=^_, rev=\E[4ZZ, 15444 rmir=\Er, rmso=\E[%gh%{4}%^%Ph%gh%dZZ, 15445 rmul=\E[%gh%{8}%^%Ph%gh%dZZ, rs2=\Eo1, 15446 sgr=\E[%'0'%?%p1%t%'8'%|%;%?%p2%t%'8'%|%;%?%p3%t%'4'%|%;%?%p4%t%'2'%|%;%?%p7%t%'1'%|%;%cZZ, 15447 sgr0=\E[0ZZ, smir=\Eq, smso=\E[8ZZ, smul=\E[8ZZ, tbc=\E3, 15448icl6404-w|kds7372-w|ICL 6404 aka Kokusai Display Systems 7372 132 cols, 15449 rs2=\Eo1, use=icl6404, 15450 15451#### Interactive Systems Corp 15452# 15453# ISC used to sell OEMed and customized hardware to support ISC UNIX. 15454# ISC UNIX still exists in 1995, but ISC itself is no more; they got 15455# bought out by Sun. 15456# 15457 15458# From: <cithep!eric> Wed Sep 16 08:06:44 1981 15459# (intext: removed obsolete ":ma=^K^P^R^L^L ::bc=^_:", also the 15460# ":le=^_:" later overridden -- esr) 15461intext|Interactive Systems Corporation modified owl 1200, 15462 OTbs, am, 15463 cols#80, it#8, lines#24, xmc#1, 15464 bel=^G, cbt=^Y, clear=\014$<132>, cr=^M, cub1=^H, cud1=^J, 15465 cuf1=^^, cup=\017%p1%{32}%+%c%p2%{32}%+%c, cuu1=^\, 15466 dch1=\022$<5.5*>, dl1=\021$<5.5*>, ed=\026J$<5.5*>, 15467 el=^Kp^R, ht=^I, il1=\020$<5.5*>, ind=^J, ip=$<5.5*>, kbs=^H, 15468 kcub1=^_, kcud1=^J, kcuf1=^^, kcuu1=^\, kf0=^VJ\r, kf1=^VA\r, 15469 kf2=^VB\r, kf3=^VC\r, kf4=^VD\r, kf5=^VE\r, kf6=^VF\r, 15470 kf7=^VG\r, kf8=^VH\r, kf9=^VI\r, khome=^Z, rmir=^V<, 15471 rmkx=^V9, rmso=^V#\s, smir=^V;, smkx=\036\:\264\026%%, 15472 smso=^V$\,, 15473intext2|intextii|INTERACTIVE modified owl 1251, 15474 am, bw, ul, 15475 cols#80, lines#24, xmc#0, 15476 bel=^G, cbt=\E[Z, clear=\E[H\E[2J, cr=^M, cub1=\E[D, 15477 cud1=\E[B, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 15478 dch1=\E[P, dl1=\E[M, ed=\E[J, el=\E[K, 15479 flash=\E[;;;;;;;;;2;;u$<200/>\E[;;;;;;;;;1;;u, 15480 hpa=\E[%p1%{1}%+%dG, ht=^I, ich1=\E[@, il1=\E[L, ind=\E[S, 15481 kbs=^H, kcub1=\ED\r, kcud1=\EB\r, kcuf1=\EC\r, kcuu1=\EA\r, 15482 kf0=\E@\r, kf1=\EP\r, kf2=\EQ\r, kf3=\ES\r, kf4=\ET\r, 15483 kf5=\EU\r, kf6=\EV\r, kf7=\EW\r, kf8=\EX\r, kf9=\EY\r, 15484 khome=\ER\r, lf0=REFRSH, lf1=DEL CH, lf2=TABSET, lf3=GOTO, 15485 lf4=+PAGE, lf5=+SRCH, lf6=-PAGE, lf7=-SRCH, lf8=LEFT, 15486 lf9=RIGHT, ri=\E[T, rmso=\E[2 D, rmul=\E[2 D, smso=\E[6 D, 15487 smul=\E[18 D, 15488 15489#### Kimtron (abm, kt) 15490# 15491# Kimtron seems to be history, but as March 1998 these people are still 15492# offering repair services for Kimtron equipment: 15493# 15494# Com/Pair Monitor Service 15495# 1105 N. Cliff Ave. 15496# Sioux Falls, South Dakota 57103 15497# 15498# WATS voice: 1-800/398-4946 15499# POTS fax: +1 605/338-8709 15500# POTS voice: +1 605/338-9650 15501# Email: <compair@sd.cybernex.net> 15502# Internet/Web: <http://www.com-pair.com> 15503# 15504# Kimtron entries include (undocumented) codes for: enter dim mode, 15505# enter bold mode, enter reverse mode, turn off all attributes. 15506# 15507 15508# Kimtron ABM 85 added by Dual Systems 15509# (abm85: removed duplicated ":kd=^J:" -- esr) 15510abm85|Kimtron ABM 85, 15511 OTbs, am, bw, msgr, 15512 cols#80, it#8, lines#24, xmc#1, 15513 cbt=\EI, clear=\E*, cub1=^H, cud1=^J, cuf1=^L, 15514 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 15515 dl1=\ER, ed=\Ey, el=\Et, ht=^I, 15516 if=/usr/share/tabset/stdcrt, il1=\EE, 15517 is2=\EC\EX\Eg\En\E%\Er\E(\Ek\Em\Eq, kbs=^H, kcub1=^H, 15518 kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, rmir=\Er, rmso=\Ek, 15519 rmul=\Em, smir=\EQ, smso=\Ej, smul=\El, 15520# Kimtron ABM 85H added by Dual Systems. 15521# Some notes about the abm85h entries: 15522# 1) there are several firmware revs of 85H in the world. Use abm85h-old for 15523# firmware revs prior to SP51 15524# 2) Make sure to use abm85h entry if the terminal is in 85h mode and the 15525# abm85e entry if it is in tvi920 emulation mode. They are incompatible 15526# in some places and NOT software settable i.e., <is2> can't fix it) 15527# 3) In 85h mode, the arrow keys and special functions transmit when 15528# the terminal is in dup-edit, and work only locally in local-edit. 15529# Vi won't swallow `del char' for instance, but <smcup> turns on 15530# dup-edit anyway so that the arrow keys will work right. If the 15531# arrow keys don't work the way you like, change <smcup>, <rmcup>, and 15532# <is2>. Note that 920E mode does not have software commands to toggle 15533# between dup and local edit, so you get whatever was set last on the 15534# terminal. 15535# 4) <flash> attribute is nice, but seems too slow to work correctly 15536# (\Eb<pad>\Ed) 15537# 5) Make sure `hidden' attributes are selected. If `embedded' attributes 15538# are selected, the <xmc@> entry should be removed. 15539# 6) auto new-line should be on (selectable from setup mode only) 15540# 15541# From: Erik Fair <fair@ucbarpa> Sun Oct 27 07:21:05 1985 15542abm85h|Kimtron ABM 85H native mode, 15543 hs, 15544 xmc@, 15545 bel=^G, cnorm=\E.4, cvvis=\E.2, dim=\E), dsl=\Ee, flash@, 15546 fsl=^M, invis@, 15547 is2=\EC\EN\EX\024\016\EA\Ea\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\EG0\Ed\E.4\El, 15548 kcud1=^V, sgr0=\E(\EG0, smir=\EZ, tsl=\Eg\Ef, use=adm+sgr, 15549 use=abm85, 15550abm85e|Kimtron ABM 85H in 920E mode, 15551 xmc@, 15552 bel=^G, dim=\E), flash@, 15553 is2=\EC\EX\EA\E%\E9\Ee\Er\En\E"\E}\E'\E(\Ef\r\Ek\Eq\Em, 15554 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85, 15555abm85h-old|oabm85h|o85h|Kimtron ABM 85H with old firmware rev., 15556 xmc@, 15557 bel=^G, dim=\E), 15558 is2=\E}\EC\EX\Ee\En\E%\Er\E(\Ek\Em\Eq\Ed\ET\EC\E9\EF, 15559 rev=\Ej, sgr0=\E(\Ek, smir=\EZ, use=abm85, 15560# From: <malman@bbn-vax.arpa> 15561# (kt7: removed obsolete :ma=^V^J^L :" -- esr) 15562kt7|kimtron model kt-7, 15563 OTbs, am, 15564 cols#80, it#8, lines#24, 15565 cbt=\EI, clear=^Z, cub1=^H, cud1=^V, cuf1=^L, 15566 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 15567 dl1=\ER, ed=\EY, el=\ET, fsl=\Eg, home=^^, ht=^I, ich1=\EQ, 15568 if=/usr/share/tabset/stdcrt, il1=\EE, invis@, is2=\El\E", 15569 kbs=^H, kcbt=\EI, kclr=^Z, kcub1=^H, kcud1=^V, kcuf1=^L, 15570 kcuu1=^K, kdch1=\EW, kdl1=\ER, ked=\EY, kel=\ET, kf0=^AI\r, 15571 kf1=^A@\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 15572 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 15573 kich1=\EQ, kil1=\EE, tsl=\Ef, use=adm+sgr, 15574# Renamed TB=^I to :ta:, BE=^G to :bl:, BS=^H to :kb:, N to :kS: (based on the 15575# other kt7 entry and the adjacent key capabilities). Removed EE which is 15576# identical to :mh:. Removed :ES=\EGD: which is some kind of highlight 15577# but we can't figure out what. 15578kt7ix|kimtron model kt-7 or 70 in IX mode, 15579 am, bw, 15580 cols#80, it#8, lines#25, 15581 acsc=jYk?lZm@nEqDt4uCvAwBx3, bel=^G, blink=\EG2, cbt=\EI, 15582 civis=\E.0, clear=\E*, cnorm=\E.3, cr=^M, cub1=^H, cud1=^V, 15583 cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 15584 dch1=\EW, dim=\EG@, dl1=\ER, dsl=\Ef\r, ed=\EY, el=\ET, fsl=^M, 15585 home=^^, ht=^I, ich1=\EQ, il1=\EE, ind=^J, 15586 is2=\EG0\E s\017\E~, kbs=^H, kcbt=\EI, kclr=\E*, 15587 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdl1=\ER, 15588 ked=\EY, kel=\ET, kend=\EY, kf0=^AI\r, kf1=^A@\r, kf2=^AA\r, 15589 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 15590 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\EQ, kil1=\EE, knp=\EJ, 15591 nel=^M^J, pulse=\EK, rmacs=\E%%, rmir=, rmso=\EG0, rmul=\EG0, 15592 sgr0=\EG0, smacs=\E$, smir=, smso=\EG4, smul=\EG8, tsl=\Ef, 15593 15594#### Microdata/MDIS 15595# 15596# This was a line of terminals made by McDonnell-Douglas Information Systems. 15597# These entries come direct from MDIS documentation. I have edited them only 15598# to move primary names of the form p[0-9] * to aliases, and to comment out 15599# <rmacs>/<smacs> in a couple of entries without <acsc> strings. I have 15600# also removed the change history; the last version indicates this is 15601# version 4.3 by A.Barkus, September 1990 (earliest entry is October 1989). 15602# 15603 15604# McDonnell Information Systems Terminal Family History 15605# ========================================= 15606# 15607# Prism-1, Prism-2 and P99: 15608# Ancient Microdata and CMC terminals, vaguely like Adds Regent 25. 15609# 15610# Prism-4 and Prism-5: 15611# Slightly less ancient range of Microdata terminals. Follow-on from 15612# Prism-2, but with many enhancements. P5 has eight display pages. 15613# 15614# Prism-6: 15615# A special terminal for use with library systems, primarily in Germany. 15616# Limited numbers. Similar functionality to P5 (except attributes?). 15617# 15618# Prism-7, Prism-8 and Prism-9: 15619# More recent range of MDIS terminals, in which P7 and P8 15620# replace the P4 & P5, with added functionality, and P9 is the flagship. 15621# The P9 has two emulation modes - P8 and ANSI - and includes a 15622# large number of the DEC VT220 control sequences. Both 15623# P8 and P9 support 80c/24ln/8pg and 132cl/24li/4pg formats. 15624# 15625# Prism-12 and Prism-14: 15626# Latest range, functionally very similar to the P9. The P14 has a 15627# black-on-white overscanning screen. 15628# 15629# The terminfo definitions given here are: 15630# 15631# p2 - Prism-2 (or Prism-1 or P99). 15632# 15633# p4 - Prism-4 (and older P7s & P8s). 15634# p5 - Prism-5 (or Prism-6). 15635# 15636# p7 - Prism-7. 15637# p8 - Prism-8 (in national or multinational mode). 15638# p8-w - 132 column version of p8. 15639# p9 - Prism-9 in ANSI mode. 15640# p9-w - 132 column version of p9. 15641# p9-8 - Prism-9 in Prism-8 emulation mode. 15642# p9-8-w - As p9-8, but with 132 columns. 15643# 15644# p12 - Prism-12 in ANSI mode. 15645# p12-w - 132 column version of p12. 15646# p12-m - Prism-12 in MDC emulation mode. 15647# p12-m-w - As p12-m, but with 132 columns. 15648# p14 - Prism-14 in ANSI mode. 15649# p14-w - 132 column version of p14. 15650# p14-m - Prism-14 in MDC emulation mode. 15651# p14-m-w - As p14-m, but with 132 columns. 15652# 15653# p2: Prism-2 15654# ----------- 15655# 15656# Includes Prism-1 and basic P99 without SP or MP loaded. 15657# The simplest form of Prism-type terminal. 15658# Basic cursor movement and clearing operations only. 15659# No video attributes. 15660# Notes: 15661# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next 15662# value up, followed by backspace. 15663# 15664prism2|MDC Prism-2, 15665 am, bw, msgr, 15666 cols#80, lines#24, 15667 bel=^G, clear=\014$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 15668 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 15669 cuu1=^Z, ed=\EJ, el=\EK, home=^A, 15670 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 15671 ind=^J, kbs=^H, khome=^A, vpa=\013%p1%{32}%+%c, 15672 15673# p4: Prism-4 15674# ----------- 15675# 15676# Includes early versions of P7 & P8. 15677# Basic family definition for most Prisms (except P2 and P9 ANSI). 15678# Notes: 15679# Horizontal cursor qualifiers of NUL, XON and XOFF are mapped to the next 15680# value up, followed by backspace. 15681# Cursor key definitions removed because they interfere with vi and csh keys. 15682# 15683prism4|p4|P4|MDC Prism-4, 15684 am, bw, hs, mc5i, msgr, 15685 cols#80, lines#24, wsl#72, xmc#1, 15686 bel=^G, blink=^CB, civis=^]\344, clear=\014$<20>, 15687 cnorm=^]\342, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 15688 cup=\013%p1%{32}%+%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 15689 cuu1=^Z, dim=^CA, dsl=\035\343\035\345, ed=\EJ, el=\EK, 15690 fsl=^]\345, home=^A, 15691 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%Pc%?%{17}%gc%=%{19}%gc%=%|%gc%!%|%t%{1}%gc%+%c%{8}%e%gc%;%c, 15692 ind=^J, invis=^CH, kbs=^H, khome=^A, mc0=\EU, mc4=\ET, mc5=\ER, 15693 rev=^CD, rmso=^C\s, rmul=^C\s, 15694 sgr=\003%{64}%?%p1%p3%|%t%{4}%+%;%?%p2%t%{16}%+%;%?%p4%t%{2}%+%;%?%p5%t%{1}%+%;%?%p7%t%{8}%+%;%c%?%p9%t\016%e\017%;, 15695 sgr0=^C\s, smso=^CD, smul=^CP, tsl=^]\343, 15696 vpa=\013%p1%{32}%+%c, 15697 15698# p5: Prism-5 15699# ----------- 15700# 15701# Same definition as p4. Includes Prism-6 (not tested!). 15702# Does not use any multi-page features. 15703# 15704prism5|p5|P5|MDC Prism-5, 15705 use=p4, 15706 15707# p7: Prism-7 15708# ----------- 15709# 15710# Similar definition to p4. Uses ANSI cursor motion to avoid network problems. 15711# Notes: 15712# Use p4 for very early models of P7. 15713# Rev-index removed; can't send nulls to terminal in 8-bit modes. 15714# 15715prism7|p7|P7|MDC Prism-7, 15716 cup=\E[%i%p1%d;%p2%dH, hpa@, vpa@, use=p4, 15717 15718# p8: Prism-8 15719# ----------- 15720# 15721# Similar definition to p7. Uses ANSI cursor motion to avoid network problems. 15722# Supports national and multinational character sets. 15723# Notes: 15724# Alternate char set operations only work in multinational mode. 15725# Use p4 for very early models of P8. 15726# Rev-index removed; can't send nulls to terminal in 8-bit modes. 15727# (esr: commented out <smacs>/<rmacs> because there's no <acsc>) 15728# 15729prism8|p8|P8|MDC Prism-8, 15730 cup=\E[%i%p1%d;%p2%dH, hpa=\E[%i%p1%d`, is2=\E[<12h, 15731 vpa=\E[%i%p1%dd, use=p4, 15732 15733# p8-w: Prism-8 in 132 column mode 15734# -------------------------------- 15735# 15736# 'Wide' version of p8. 15737# Notes: 15738# Rev-index removed; can't send nulls to terminal in 8-bit modes. 15739# 15740prism8-w|p8-w|P8-W|MDC Prism-8 in 132 column mode, 15741 cols#132, 15742 is2=\E[<12h\E[<14h, use=p8, 15743 15744# p9: Prism-9 in ANSI mode 15745# ------------------------- 15746# 15747# The "flagship" model of this generation of terminals. 15748# ANSI X3.64 (ISO 6429) standard sequences, plus many DEC VT220 ones. 15749# Notes: 15750# Tabs only reset by "reset". Otherwise assumes default (8 cols). 15751# Fixes to deal with terminal firmware bugs: 15752# . 'ri' uses insert-line since rev index doesn't always 15753# . 'sgr0' has extra '0' since esc[m fails 15754# . 'fsl' & 'dsl' use illegal char since cr is actioned wrong on line 25 15755# Not covered in the current definition: 15756# . Labels 15757# . Programming Fn keys 15758# . Graphic characters (defaults correctly to vt100) 15759# . Padding values (sets xon) 15760# (esr: commented out <smacs>/<rmacs> because there's no <acsc>) 15761# 15762prism9|p9|P9|MDC Prism-9 in ANSII mode, 15763 am, bw, hs, msgr, xenl, xon, 15764 cols#80, it#8, lines#24, vt#3, wsl#72, 15765 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[<4l, 15766 clear=^L, cnorm=\E[<4h, cr=^M, csr=\E[%i%p1%d;%p2%d%%v, 15767 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 15768 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 15769 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 15770 dl=\E[%p1%dM, dl1=\E[M, dsl=\E[%}\024, ech=\E[%p1%dX, 15771 ed=\E[J$<10>, el=\E[K, fsl=^T, home=\E[H, hpa=\E[%i%p1%d`, 15772 ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[L, ind=^J, 15773 is2=\E[&p\E[<12l\E F, kbs=^H, kclr=^L, kcub1=\E[D, 15774 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[11~, 15775 kf10=\E[21~, kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, 15776 kf14=\E[26~, kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, 15777 kf18=\E[32~, kf2=\E[12~, kf3=\E[13~, kf4=\E[14~, 15778 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 15779 khome=\E[H, nel=^M^J, prot=\E[32%{, rc=\E[%z, 15780 rep=\E[%p2%db%p1%c, rev=\E[7m, ri=\E[L, rmir=\E[4l, 15781 rmso=\E[27m, rmul=\E[24m, 15782 rs2=\E[&p\E[<12l\E F\E[3g\E[9;17;25;33;41;49;57;65;73 N, 15783 sc=\E[%y, 15784 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p6%t;1%;m%?%p8%t\E[32%%{%;%?%p9%t\016%e\017%;, 15785 sgr0=\E[0m\017, smir=\E[4h, smso=\E[7m, smul=\E[4m, 15786 tbc=\E[3g, tsl=\E[%i%p1%d%%}, vpa=\E[%i%p1%dd, 15787 use=ansi+pp, 15788 15789# p9-w: Prism-9 in 132 column mode 15790# -------------------------------- 15791# 15792# 'Wide' version of p9. 15793# 15794prism9-w|p9-w|P9-W|MDC Prism-9 in 132 column mode, 15795 cols#132, 15796 is2=\E[&p\E[<12l\E F\E[<14h, 15797 rs2=\E[&p\E[<12l\E F\E[<14h, use=p9, 15798 15799# p9-8: Prism-9 in P8 mode 15800# ------------------------ 15801# 15802# P9 terminal in P8 emulation mode. 15803# Similar to p8 definition. 15804# Insertion and deletion operations possible. 15805# 15806prism9-8|p9-8|P9-8|MDC Prism-9 in P8 mode, 15807 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 15808 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8, 15809 15810# p9-8-w: Prism-9 in P8 and 132 column modes 15811# ------------------------------------------ 15812# 15813# P9 terminal in P8 emulation mode and 132 column mode. 15814# 15815prism9-8-w|p9-8-w|P9-8-W|MDC Prism-9 in Prism 8 emulation and 132 column mode, 15816 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 15817 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, use=p8-w, 15818 15819# p12: Prism-12 in ANSI mode 15820# --------------------------- 15821# 15822# See p9 definition. 15823# 15824prism12|p12|P12|MDC Prism-12 in ANSI mode, 15825 use=p9, 15826 15827# p12-w: Prism-12 in 132 column mode 15828# ---------------------------------- 15829# 15830# 'Wide' version of p12. 15831# 15832prism12-w|p12-w|P12-W|MDC Prism-12 in 132 column mode, 15833 use=p9-w, 15834 15835# p12-m: Prism-12 in MDC emulation mode 15836# ------------------------------------- 15837# 15838# P12 terminal in MDC emulation mode. 15839# Similar to p8 definition. 15840# Insertion and deletion operations possible. 15841# 15842prism12-m|p12-m|P12-M|MDC Prism-12 in MDC emulation mode, 15843 use=p9-8, 15844 15845# p12-m-w: Prism-12 in MDC emulation and 132 column modes 15846# ------------------------------------------------------- 15847# 15848# P12 terminal in MDC emulation mode and 132 column mode. 15849# 15850prism12-m-w|p12-m-w|P12-M-W|MDC Prism-12 in MDC emulation and 132 column mode, 15851 use=p9-8-w, 15852 15853# p14: Prism-14 in ANSII mode 15854# --------------------------- 15855# 15856# See p9 definition. 15857# 15858prism14|p14|P14|MDC Prism-14 in ANSII mode, 15859 use=p9, 15860 15861# p14-w: Prism-14 in 132 column mode 15862# ---------------------------------- 15863# 15864# 'Wide' version of p14. 15865# 15866prism14-w|p14-w|P14-W|MDC Prism-14 in 132 column mode, 15867 use=p9-w, 15868 15869# p14-m: Prism-14 in MDC emulation mode 15870# ------------------------------------- 15871# 15872# P14 terminal in MDC emulation mode. 15873# Similar to p8 definition. 15874# Insertion and deletion operations possible. 15875# 15876prism14-m|p14-m|P14-M|MDC Prism-14 in MDC emulation mode, 15877 use=p9-8, 15878 15879# p14-m-w: Prism-14 in MDC emulation and 132 column modes 15880# ------------------------------------------------------- 15881# 15882# P14 terminal in MDC emulation mode and 132 column mode. 15883# 15884prism14-m-w|p14-m-w|P14-M-W|MDC Prism-14 in MDC emulation and 132 column mode, 15885 use=p9-8-w, 15886 15887# End of McDonnell Information Systems Prism definitions 15888 15889# These things were popular in the Pick database community at one time 15890# From: George Land <georgeland@aol.com> 24 Sep 1996 15891p8gl|prism8gl|McDonnell-Douglas Prism-8 alternate definition, 15892 am, bw, hs, mir, 15893 cols#80, lines#24, ma#1, wsl#78, xmc#1, 15894 bel=^G, blink=^CB, clear=^L, cr=^M, cub1=^U, cud1=^J, cuf1=^F, 15895 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, dch1=\s^H, dim=^CA, dl1=^P, 15896 ed=\EJ, el=\EK, home=^A, ind=^J, invis=^CH, kbs=^H, kcub1=^U, 15897 kcud1=^J, kcuf1=^F, kcuu1=^Z, kdch1=\s^H, kdl1=^P, ked=\EJ, 15898 kel=\EK, kf1=^A@\r, kf10=^AI\r, kf12=^AJ\r, kf13=^AK\r, 15899 kf14=^AL\r, kf15=^AM\r, kf16=^AN\r, kf17=^AO\r, kf2=^AA\r, 15900 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 15901 kf8=^AG\r, kf9=^AH\r, khome=^A, lf1=F1, lf10=F10, lf2=F2, 15902 lf3=F3, lf4=F4, lf5=F5, lf6=F6, lf7=F7, lf8=F8, lf9=F9, nel=^J^M, 15903 pad=\0, rev=^CD, rmso=^C\s, rmul=^C\s, sgr0=^C\s, smso=^CE, 15904 smul=^C0, 15905 15906#### Microterm (act, mime) 15907# 15908# The mime1 entries refer to the Microterm Mime I or Mime II. 15909# The default mime is assumed to be in enhanced act iv mode. 15910# 15911 15912# New "safe" cursor movement (5/87) from <reuss@umd5.umd.edu>. Prevents 15913# freakout with out-of-range args on Sytek multiplexors. No <smso=^N> and 15914# <rmso=^N> since it gets confused and it's too dim anyway. No <ich1> 15915# since Sytek insists ^S means xoff. 15916# (act4: found ":ic=2^S:ei=:im=:ip=.1*^V:" commented out in 8.3 -- esr) 15917act4|microterm|microterm act iv, 15918 OTbs, am, 15919 cols#80, lines#24, 15920 bel=^G, clear=\014$<12/>, cr=^M, cub1=^H, cud1=^K, cuf1=^X, 15921 cup=\024%p1%{24}%+%c%p2%p2%?%{47}%>%t%{48}%+%;%{80}%+%c, 15922 cuu1=^Z, dch1=\004$<.1*/>, dl1=\027$<2.3*/>, 15923 ed=\037$<2.2*/>, el=\036$<.1*/>, home=^], 15924 il1=\001<2.3*/>, ind=^J, kcub1=^H, kcud1=^K, kcuf1=^X, 15925 kcuu1=^Z, 15926# The padding on :sr: and :ta: for act5 and mime is a guess and not final. 15927# The act 5 has hardware tabs, but they are in columns 8, 16, 24, 32, 41 (!)... 15928# (microterm5: removed obsolete ":ma==^Z^P^Xl^Kj:" -- esr) 15929act5|microterm5|microterm act v, 15930 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, ri=\EH$<3>, uc=^H\EA, 15931 use=act4, 15932# Mimes using brightness for standout. Half bright is really dim unless 15933# you turn up the brightness so far that lines show up on the screen. 15934mime-fb|full bright mime1, 15935 is2=^S\E, rmso=^S, smso=^Y, use=mime, 15936mime-hb|half bright mime1, 15937 is2=^Y\E, rmso=^Y, smso=^S, use=mime, 15938# (mime: removed obsolete ":ma=^X ^K^J^Z^P:"; removed ":do=^K:" that overrode 15939# the more plausible ":do=^J:" -- esr) 15940# uc was at one time disabled to get around a curses bug, be wary of it 15941mime|mime1|mime2|mimei|mimeii|microterm mime1, 15942 OTbs, am, 15943 cols#80, it#8, lines#24, vt#9, 15944 bel=^G, clear=^]^C, cr=^M, cub1=^H, cud1=^J, cuf1=^X, 15945 cup=\024%p1%{24}%+%c%p2%p2%?%{32}%>%t%{48}%+%;%{80}%+%c, 15946 cuu1=^Z, dl1=\027$<80>, ed=^_, el=^^, home=^], ht=\011$<2>, 15947 il1=\001$<80>, ind=^J, is2=^S\E^Q, kcub1=^H, kcud1=^K, 15948 kcuf1=^X, kcuu1=^Z, ri=\022$<3>, uc=^U, 15949# These termcaps (for mime2a) put the terminal in low intensity mode 15950# since high intensity mode is so obnoxious. 15951mime2a-s|microterm mime2a (emulating an enhanced soroc iq120), 15952 OTbs, am, 15953 cols#80, lines#24, 15954 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 15955 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EI, dch1=\ED, 15956 dl1=\027$<20*>, ed=\EJ$<20*>, el=\EK, home=^^, 15957 il1=\001$<20*>, ind=^J, ip=$<2>, is2=\E), kcub1=^H, kcud1=^J, 15958 kcuf1=^L, kcuu1=^K, ri=\EI, rmir=^Z, rmso=\E;, rmul=\E7, 15959 smir=\EE, smso=\E\:, smul=\E6, 15960# This is the preferred mode (but ^X can't be used as a kill character) 15961mime2a|mime2a-v|microterm mime2a (emulating an enhanced vt52), 15962 OTbs, 15963 cols#80, it#8, lines#24, 15964 bel=^G, clear=\EL, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 15965 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=^N, 15966 dl1=\027$<20*>, ed=\EQ$<20*>, el=\EP, home=\EH, ht=^I, 15967 il1=\001$<20*>, ind=^J, ip=$<2>, is2=^Y, kcub1=\ED, 15968 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, ri=\EA, rmir=^Z, rmso=\E9, 15969 rmul=\E5, smir=^O, smso=\E8, smul=\E4, 15970# (mime3a: removed obsolete ":ma=^X ^K^J^Z^P:" -- esr) 15971mime3a|mime1 emulating 3a, 15972 am@, 15973 kcub1=^H, kcud1=^K, kcuf1=^X, kcuu1=^Z, use=adm3a, 15974mime3ax|mime-3ax|mime1 emulating enhanced 3a, 15975 it#8, 15976 dl1=\027$<80>, ed=^_, el=^X, ht=\011$<3>, il1=\001$<80>, 15977 use=mime3a, 15978# Wed Mar 9 18:53:21 1983 15979# We run our terminals at 2400 baud, so there might be some timing problems at 15980# higher speeds. The major improvements in this model are the terminal now 15981# scrolls down and insert mode works without redrawing the rest of the line 15982# to the right of the cursor. This is done with a bit of a kludge using the 15983# exit graphics mode to get out of insert, but it does not appear to hurt 15984# anything when using vi at least. If you have some users using act4s with 15985# programs that use curses and graphics mode this could be a problem. 15986mime314|mm314|mime 314, 15987 am, 15988 cols#80, lines#24, 15989 clear=^L, cub1=^H, cuf1=^X, cup=\024%p1%c%p2%c, cuu1=^Z, 15990 dch1=^D, dl1=^W, ed=^_, el=^^, home=^], ht=^I, il1=^A, kcub1=^H, 15991 kcud1=^K, kcuf1=^X, kcuu1=^Z, rmir=^V, smir=^S, 15992# Microterm mime 340 from University of Wisconsin 15993mm340|mime340|mime 340, 15994 cols#80, lines#24, 15995 clear=\032$<12/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 15996 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 15997 dch1=\E#$<2.1*/>, dl1=\EV$<49.6/>, ed=\037$<2*/>, 15998 el=\EL$<2.1/>, ht=^I, il1=\EU$<46/>, ind=^J, is2=\E\,, 15999 kbs=^H, kcub1=^H, kcud1=^J, kcuu1=^K, nel=^M^J, 16000# This came from University of Wisconsin marked "astro termcap for jooss". 16001# (mt4520-rv: removed obsolete ":kn#4:" and incorrect ":ri=\E[C:"; 16002# also added <rmam>/<smam> based on the init string -- esr) 16003mt4520-rv|micro-term 4520 reverse video, 16004 am, hs, msgr, xenl, xon, 16005 cols#80, it#8, lines#24, wsl#80, 16006 bel=^G, clear=\E[H\E[J, cnorm=\E[0V\E8, cr=^M, 16007 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 16008 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 16009 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 16010 cvvis=\E7\E[0U, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 16011 dl1=\E[M, ed=\E[J, el=\E[K, flash=\E[?5l$<200/>\E[?5h, 16012 fsl=\E[?5l\E[?5h, home=\E[H, ht=^I, hts=\EH, ich=\E[%p1%d@, 16013 ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 16014 is2=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[1;24r\E[24;1H\E[H\E[J, 16015 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 16016 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, 16017 ll=\E[24;1H, nel=\EE, rc=\E8, rf=/usr/share/tabset/vt100, 16018 ri=\EM, rmam=\E[?7l, rmso=\E[0m, rmul=\E[24m, 16019 rs1=\E(B\E[2l\E>\E[20l\E[?3l\E[?5h\E[?7h\E[H\E[J, 16020 sc=\E7, sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, 16021 tbc=\E[g, tsl=\E[25;1H, 16022 16023# Fri Aug 5 08:11:57 1983 16024# This entry works for the ergo 4000 with the following setups: 16025# ansi,wraparound,newline disabled, xon/xoff disabled in both 16026# setup a & c. 16027# 16028# WARNING!!! There are multiple versions of ERGO 4000 microcode 16029# Be advised that very early versions DO NOT WORK RIGHT !! 16030# Microterm does have a ROM exchange program- use it or lose big 16031# (ergo400: added <rmam>/<smam> based on the init string -- esr) 16032ergo4000|microterm ergo 4000, 16033 da, db, msgr, 16034 cols#80, lines#66, 16035 bel=^G, clear=\E[H\E[2J$<80>, cr=^M, cub1=^H, cud1=\E[B, 16036 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 16037 dch1=\E[1P$<80>, dl1=\E[1M$<5*>, ed=\E[0J$<15>, 16038 el=\E[0K$<13>, ht=^I, il1=\E[1L$<5*>, ind=\ED$<20*>, 16039 is2=\E<\E=\E[?1l\E[?4l\E[?5l\E[?7h\E[?8h$<300>, 16040 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 16041 kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=pf1, lf2=pf2, lf3=pf3, 16042 lf4=pf4, ri=\EM$<20*>, rmam=\E[?7l, rmir=\E[4l, 16043 rmkx=\E=$<4>, rmso=\E[m$<20>, sgr0=\E[m$<20>, 16044 smam=\E[?7m, smir=\E[4h$<6>, smkx=\E=$<4>, 16045 smso=\E[7m$<20>, 16046 16047#### NCR 16048# 16049# NCR's terminal group was merged with AT&T's when AT&T bought the company. 16050# For what happened to that group, see the ADDS section. 16051# 16052# There is an NCR4103 terminal that's just a re-badged Wyse-50. 16053# 16054 16055# The following vendor-supplied termcaps were captured from the Boundless 16056# Technologies site, 8 March 1998. I removed all-upper-case names that were 16057# identical, except for case, to lower-case ones. I also uncommented the acsc 16058# capabilities.X 16059# 16060# The Intecolor emulation of the NCR 2900/260C color terminal is basically a 16061# DEC vt200/300 with color capabilities added. 16062ncr260intan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, 16063 colors#8, pairs#64, 16064 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 16065 use=ncr260vt300an, 16066# The Intecolor emulation of the NCR 2900/260C color terminal is basically a 16067# DEC vt200/300 with color capabilities added. 16068ncr260intwan|NCR Intecolor emulation of the 2900_260C with an ANSI keyboard, 16069 colors#8, pairs#64, 16070 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 16071 use=ncr260vt300wan, 16072# The Intecolor emulation of the NCR 2900/260C color terminal is basically a 16073# DEC vt200/300 with color capabilities added. 16074ncr260intpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard, 16075 colors#8, pairs#64, 16076 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 16077 use=ncr260vt300pp, 16078# The Intecolor emulation of the NCR 2900/260C color terminal is basicly a 16079# DEC vt200/300 with color capabilities added. 16080ncr260intwpp|NCR Intecolor emulation of the 2900_260C with a PC+ keyboard in 132 column mode, 16081 colors#8, pairs#64, 16082 op=\E[0m, setab=\E[4%p1%dm, setaf=\E[3%p1%dm, 16083 use=ncr260vt300wpp, 16084# This definition for ViewPoint supports several attributes. This means 16085# that it has magic cookies (extra spaces where the attributes begin). 16086# Some applications do not function well with magic cookies. The System 16087# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 16088# If supporting various attributes is not vital, 'xmc#1' and the extra 16089# attributes can be removed. 16090# Mapping to ASCII character set ('acsc' capability) can also be 16091# restored if needed. 16092ncr260vppp|NCR 2900_260 viewpoint, 16093 am, bw, hs, km, mc5i, mir, msgr, xon, 16094 cols#80, lines#24, nlab#32, xmc#1, 16095 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 16096 cbt=\EI, civis=\E`0, clear=\014$<40>, cnorm=\E`5, 16097 cr=\r$<2>, cub1=\010$<2>, cud1=\n$<2>, cuf1=\006$<2>, 16098 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5>, cuu1=\032$<2>, 16099 dch1=\EW$<2>, dim=\EGp, dl1=\El$<2>, dsl=\E`c, ed=\Ek$<2>, 16100 el=\EK$<2>, fsl=^M, home=\036$<2>, ht=^I, hts=\E1, 16101 il1=\EM$<2>, ind=\n$<2>, invis=\EG1, 16102 is2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 16103 kDC=\El, kEND=\Ek, kHOM=^A, kPRT=\E7, kRIT=^F, ka1=^A, ka3=\EJ, 16104 kbs=^H, kc1=\ET, kc3=\EJ, kcub1=^U, kcud1=^J, kcuf1=^F, 16105 kcuu1=^Z, kdch1=\EW, kend=\EK, kf1=^B1\r, kf10=^B\:\r, 16106 kf11=^B;\r, kf12=^B<\r, kf13=^B=\r, kf14=^B>\r, kf15=^B?\r, 16107 kf16=^B@\r, kf17=^B!\r, kf18=^B"\r, kf19=^B#\r, kf2=^B2\r, 16108 kf20=^B$\r, kf21=\002%^M, kf22=^B&\r, kf23=^B'\r, 16109 kf24=^B(\r, kf25=^B)\r, kf26=^B*\r, kf27=^B+\r, 16110 kf28=^B\,\r, kf29=^B-\r, kf3=^B3\r, kf30=^B.\r, kf31=^B/\r, 16111 kf32=^B0\r, kf4=^B4\r, kf5=^B5\r, kf6=^B6\r, kf7=^B7\r, 16112 kf8=^B8\r, kf9=^B9\r, khome=^A, kich1=\Eq, knp=\EJ, kpp=\EJ, 16113 kprt=\EP, ll=\001$<5>, mc0=\EP$<100>, mc4=^T, mc5=^R, 16114 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<5>, 16115 nel=\037$<2>, rev=\EG4, ri=\Ej$<2>, rmacs=\EcB0\EH\003, 16116 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 16117 rs2=\Ee6\E~%$<100>\E+\E`\:\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 16118 sgr0=\EG0\EH\003, smacs=\EcB1\EH\002, smir=\Eq, 16119 smso=\EG4, smul=\EG8, smxon=\Ec21, tsl=\EF, 16120ncr260vpwpp|NCR 2900_260 viewpoint wide mode, 16121 cols#132, 16122 cup=\Ea%i%p1%dR%p2%dC$<30>, 16123 is2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 16124 rs2=\Ee6\E~%$<100>\E+\E`;\Ed/\E`1\EO\Ee4\Ec@0@\Ec@1A\EcB0\EcC1\Ee7$<100>, 16125 use=ncr260vppp, 16126ncr260vt100an|NCR 2900_260 vt100 with ansi kybd, 16127 am, hs, mir, msgr, xenl, xon, 16128 cols#80, lines#24, nlab#32, 16129 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 16130 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 16131 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, 16132 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD$<5>, 16133 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, 16134 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 16135 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 16136 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 16137 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, 16138 ech=\E[%p1%dX, ed=\E[0J$<5>, el=\E[0K$<3>, el1=\E[1K$<3>, 16139 fsl=\E[0$}, home=\E[H$<1>, hpa=\E[%p1%dG$<40>, ht=^I, 16140 hts=\EH, ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, 16141 il1=\E[L$<5>, ind=\ED$<5>, indn=\E[%p1%dE$<5>, 16142 invis=\E[8m, 16143 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16144 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 16145 kdch1=\E[3~, kfnd=\E[1~, khlp=\E[28~, kich1=\E[2~, 16146 knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, nel=\EE$<5>, 16147 rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=^O, rmir=\E[4l, 16148 rmkx=\E[?1l\E>, rmso=\E[0m, rmul=\E[0m, 16149 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16150 sc=\E7, 16151 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>, 16152 sgr0=\E[0m\017$<20>, smacs=^N, smir=\E[4h, 16153 smkx=\E[?1h\E=, smso=\E[1;7m, smul=\E[4m, tbc=\E[3g, 16154 tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, use=vt220+keypad, 16155ncr260vt100wan|NCR 2900_260 vt100 wide mode ansi kybd, 16156 cols#132, 16157 cup=\E[%i%p1%d;%p2%dH$<30>, 16158 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16159 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16160 use=ncr260vt100an, 16161ncr260vt100pp|NCR 2900_260 vt100 with PC+ kybd, 16162 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16163 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 16164 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 16165 kend=\E[5~, khome=\E[2~, kich1=\E[1~, knp=\E[6~, kpp=\E[3~, 16166 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, 16167 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16168 smkx=\E=, use=ncr260vt100an, 16169ncr260vt100wpp|NCR 2900_260 vt100 wide mode pc+ kybd, 16170 cols#132, 16171 cup=\E[%i%p1%d;%p2%dH$<30>, 16172 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16173 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16174 use=ncr260vt100pp, 16175ncr260vt200an|NCR 2900_260 vt200 with ansi kybd, 16176 am, hs, mir, msgr, xenl, xon, 16177 cols#80, lines#24, nlab#32, 16178 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 16179 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 16180 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, 16181 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>, 16182 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, 16183 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 16184 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 16185 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 16186 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, 16187 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, 16188 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, 16189 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, 16190 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, 16191 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16192 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 16193 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~, 16194 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 16195 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 16196 kf2=\EOQ, kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, 16197 kf23=\E[33~, kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, 16198 kf27=\E[2~, kf28=\E[3~, kf29=\E[4~, kf3=\EOR, kf30=\E[5~, 16199 kf31=\E[6~, kf32=\E[7~, kf33=\E[8~, kf34=\E[9~, 16200 kf35=\E[10~, kf4=\EOS, kf5=\E[M, kf6=\E[17~, kf7=\E[18~, 16201 kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, khlp=\E[28~, 16202 kich1=\E[2~, knp=\E[6~, kpp=\E[5~, krdo=\E[29~, kslt=\E[4~, 16203 mc0=\E[i, mc4=\E[4i, mc5=\E[5i, nel=\EE, rc=\E8, rev=\E[7m, 16204 ri=\EM$<5>, rmacs=\017$<20>, rmam=\E[?7l, rmir=\E[4l, 16205 rmkx=\E[?1l\E>, rmso=\E[27m, rmul=\E[24m, 16206 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16207 sc=\E7, 16208 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>, 16209 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, 16210 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 16211 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, 16212 use=vt220+keypad, 16213ncr260vt200wan|NCR 2900_260 vt200 wide mode ansi kybd, 16214 cols#132, 16215 cup=\E[%i%p1%d;%p2%dH$<30>, 16216 is2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, 16217 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E(B\E)0\017\E[2J\E[1;1H$<200>, 16218 use=ncr260vt200an, 16219ncr260vt200pp|NCR 2900_260 vt200 with pc+ kybd, 16220 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 16221 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 16222 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 16223 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, 16224 use=ncr260vt200an, 16225ncr260vt200wpp|NCR 2900_260 vt200 wide mode pc+ kybd, 16226 cols#132, 16227 cup=\E[%i%p1%d;%p2%dH$<30>, 16228 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16229 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16230 use=ncr260vt200pp, 16231ncr260vt300an|NCR 2900_260 vt300 with ansi kybd, 16232 am, hs, mir, msgr, xenl, xon, 16233 cols#80, lines#24, nlab#32, 16234 acsc=``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 16235 blink=\E[5m, bold=\E[1m, civis=\E[?25l, 16236 clear=\E[2J\E[1;1H$<20>, cnorm=\E[?25h, cr=\r$<1>, 16237 csr=\E[%i%p1%d;%p2%dr$<5>, cub=\E[%p1%dD$<5>, 16238 cub1=\E[D$<5>, cud=\E[%p1%dB$<5>, cud1=\E[B$<5>, 16239 cuf=\E[%p1%dC$<5>, cuf1=\E[C$<5>, 16240 cup=\E[%i%p1%d;%p2%dH$<10>, cuu=\E[%p1%dA$<5>, 16241 cuu1=\E[A$<5>, dch=\E[%p1%dP$<5>, dch1=\E[1P$<5>, 16242 dl=\E[%p1%dM$<5>, dl1=\E[M$<5>, dsl=\E[0$~\E[1$~, 16243 ech=\E[%p1%dX$<5>, ed=\E[0J, el=\E[0K$<5>, el1=\E[1K$<5>, 16244 fsl=\E[0$}, home=\E[H, hpa=\E[%p1%dG$<40>, ht=^I, hts=\EH, 16245 ich=\E[%p1%d@$<5>, il=\E[%p1%dL$<5>, il1=\E[L$<5>, 16246 ind=\ED$<5>, indn=\E[%p1%dE$<5>, invis=\E[8m, 16247 is2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16248 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 16249 kdch1=\E[3~, kf0=\EOy, kf10=\E[21~, kf11=\E[23~, 16250 kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~, 16251 kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~, 16252 kf20=\E[34~, kf21=\E[31~, kf22=\E[32~, kf23=\E[33~, 16253 kf24=\E[34~, kf25=\E[35~, kf26=\E[1~, kf27=\E[2~, 16254 kf28=\E[3~, kf29=\E[4~, kf30=\E[5~, kf31=\E[6~, kf32=\E[7~, 16255 kf33=\E[8~, kf34=\E[9~, kf35=\E[10~, kf5=\E[M, kf6=\E[17~, 16256 kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 16257 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 16258 krdo=\E[29~, kslt=\E[4~, mc0=\E[i, mc4=\E[4i, mc5=\E[5i, 16259 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM$<5>, rmacs=\017$<20>, 16260 rmam=\E[?7l, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 16261 rmul=\E[24m, 16262 rs2=\E[!p\E[?7;19;67h\E[?1;3;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16263 sc=\E7, 16264 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;$<20>, 16265 sgr0=\E[0m\017$<20>, smacs=\016$<20>, smam=\E[?7h, 16266 smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 16267 tbc=\E[3g, tsl=\E[2$~\E[1$}, vpa=\E[%p1%dd$<40>, 16268 use=vt220+keypad, 16269ncr260vt300wan|NCR 2900_260 vt300 wide mode ansi kybd, 16270 cols#132, 16271 cup=\E[%i%p1%d;%p2%dH$<30>, 16272 is2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>, 16273 rs2=\E[!p\E[?3;7;19;67h\E[?4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H$<200>, 16274 use=ncr260vt300an, 16275ncr260vt300pp|NCR 2900_260 vt300 with pc+ kybd, 16276 ka1=\E[H, ka3=\EOu, kb2=\E[V, kc3=\E[U, kcub1=\E[D, 16277 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[4~, 16278 kend=\E[1~, khome=\E[H, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 16279 lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, rmkx=\E>, smkx=\E=, 16280 use=ncr260vt300an, 16281NCR260VT300WPP|ncr260vt300wpp|NCR 2900_260 vt300 wide mode pc+ kybd, 16282 cols#132, 16283 cup=\E[%i%p1%d;%p2%dH$<30>, 16284 is2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16285 rs2=\E[!p\E[?3;7;19;67h\E[?1;4l\E[1;0%w\E(B\E)0\017\E[2J\E[1;1H\E>$<200>, 16286 use=ncr260vt300pp, 16287# This terminfo file contains color capabilities for the Wyse325 emulation of 16288# the NCR 2900/260C color terminal. Because of the structure of the command 16289# (escape sequence) used to set color attributes, one of the fore/background 16290# colors must be preset to a given value. I have set the background color to 16291# black. The user can change this setup by altering the last section of the 16292# 'setf' definition. The escape sequence to set color attributes is 16293# ESC d y <foreground_color> <background_color> 1 16294# In addition, the background color can be changed through the desk accessories. 16295# The capablitiy 'op' sets colors to green on black (default combination). 16296# 16297# NOTE: The NCR Unix System Administrator's Shell will not function properly 16298# if the 'pairs' capability is defined. Un-Comment the 'pairs' 16299# capability and recompile if you wish to have it included. 16300# 16301ncr260wy325pp|NCR 2900_260 wyse 325, 16302 am, bw, hs, km, mc5i, mir, msgr, xon, 16303 colors#16, cols#80, lines#24, ncv#33, nlab#32, 16304 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 16305 cbt=\EI, civis=\E`0, clear=\E*$<10>, cnorm=\E`1, cr=^M, 16306 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 16307 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, 16308 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c, 16309 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<5>, ht=^I, 16310 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, 16311 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16312 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, 16313 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, kcbt=\EI, 16314 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, kdch1=\EW, kend=\ET, 16315 kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, 16316 kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, 16317 kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, 16318 kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, 16319 kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, kf30=^Am\r, kf31=^An\r, 16320 kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 16321 kf8=^AG\r, kf9=^AH\r, khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, 16322 kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, 16323 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, 16324 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, 16325 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 16326 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16327 setb=\s, 16328 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{64}%e%p1%{8}%=%t%{57}%e%p1%{9}%=%t%{58}%e%p1%{10}%=%t%{59}%e%p1%{11}%=%t%{60}%e%p1%{12}%=%t%{61}%e%p1%{13}%=%t%{62}%e%p1%{14}%=%t%{63}%e%p1%{15}%=%t%{56}%;\Edy%c11$<100>, 16329 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH\002\EcB1, smam=\Ed/, 16330 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, 16331 tsl=\EF, 16332ncr260wy325wpp|NCR 2900_260 wyse 325 wide mode, 16333 cols#132, 16334 cup=\Ea%i%p1%dR%p2%dC$<30>, 16335 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16336 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16337 use=ncr260wy325pp, 16338# This definition for Wyse 350 supports several attributes. This means 16339# that it has magic cookies (extra spaces where the attributes begin). 16340# Some applications do not function well with magic cookies. The System 16341# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 16342# If supporting various attributes is not vital, 'xmc#1' and the extra 16343# attributes can be removed. 16344# Mapping to ASCII character set ('acsc' capability) can also be 16345# restored if needed. 16346# In addition, color capabilities have been added to this file. The drawback, 16347# however, is that the background color has to be black. The foreground colors 16348# are numbered 0 through 15. 16349# 16350# NOTE: The NCR Unix System Administrator's Shell does not function properly 16351# with the 'pairs' capability defined as below. If you wish to 16352# have it included, Un-comment it and recompile (using 'tic'). 16353# 16354ncr260wy350pp|NCR 2900_260 wyse 350, 16355 am, bw, hs, km, mc5i, mir, msgr, xon, 16356 colors#16, cols#80, lines#24, ncv#33, nlab#32, pairs#16, xmc#1, 16357 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 16358 cbt=\EI, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 16359 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 16360 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<40>, cuu1=\013$<5>, 16361 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c, 16362 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<10>, ht=^I, 16363 hts=\E1, il1=\EE$<5>, ind=\n$<5>, invis=\EG1, 16364 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16365 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, 16366 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 16367 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, 16368 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 16369 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, 16370 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, 16371 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, 16372 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, 16373 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 16374 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, 16375 mc0=\EP$<10>, mc4=^T, mc5=^R, 16376 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<20>, 16377 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH\003\EcB0, 16378 rmam=\Ed., rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 16379 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16380 setb=\s, 16381 setf=%?%p1%{0}%=%t%{49}%e%p1%{1}%=%t%{50}%e%p1%{2}%=%t%{51}%e%p1%{3}%=%t%{52}%e%p1%{4}%=%t%{53}%e%p1%{5}%=%t%{54}%e%p1%{6}%=%t%{55}%e%p1%{7}%=%t%{102}%e%p1%{8}%=%t%{97}%e%p1%{9}%=%t%{98}%e%p1%{10}%=%t%{99}%e%p1%{11}%=%t%{101}%e%p1%{12}%=%t%{106}%e%p1%{13}%=%t%{110}%e%p1%{14}%=%t%{111}%e%p1%{15}%=%t%{56}%;\Em0%c$<100>, 16382 sgr0=\EG0\EH\003\EcD, smacs=\EH\002\EcB1, smam=\Ed/, 16383 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0, 16384 tsl=\EF, 16385ncr260wy350wpp|NCR 2900_260 wyse 350 wide mode, 16386 cols#132, 16387 cup=\Ea%i%p1%dR%p2%dC$<30>, 16388 is2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 16389 rs2=\Ee6\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 16390 use=ncr260wy350pp, 16391# This definition for Wyse 50+ supports several attributes. This means 16392# that it has magic cookies (extra spaces where the attributes begin). 16393# Some applications do not function well with magic cookies. The System 16394# Administrator's Shell in NCR Unix SVR4 1.03 is one such application. 16395# If supporting various attributes is not vital, 'xmc#1' and the extra 16396# attributes can be removed. 16397# Mapping to ASCII character set ('acsc' capability) can also be 16398# restored if needed. 16399# (ncr260wy50+pp: originally contained commented-out 16400# <acsc=j5k3l2m1n8q:t4u9v=w0x6>, as well as the commented-out one there -- esr) 16401ncr260wy50+pp|NCR 2900_260 wyse 50+, 16402 am, bw, hs, km, mc5i, mir, msgr, xon, 16403 cols#80, lines#24, nlab#32, xmc#1, 16404 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 16405 cbt=\EI$<5>, civis=\E`0, clear=\E+$<20>, cnorm=\E`1, cr=^M, 16406 cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 16407 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<30>, cuu1=\013$<5>, 16408 cvvis=\E`5, dch1=\EW$<50>, dim=\EGp, dl1=\ER$<5>, dsl=\E`c, 16409 ed=\EY$<5>, el=\ET$<5>, fsl=^M, home=\036$<10>, 16410 ht=\011$<5>, hts=\E1$<5>, il1=\EE$<5>, ind=\n$<5>, 16411 invis=\EG1, 16412 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16413 kDC=\ER, kEND=\EY, kHOM=\E{, kPRT=\E7, kRIT=^L, ka1=^^, kbs=^H, 16414 kc1=\ET, kc3=\EK, kcbt=\EI, kcub1=^H, kcud1=^J, kcuf1=^L, 16415 kcuu1=^K, kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, 16416 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 16417 kf16=^AO\r, kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, 16418 kf20=^Ac\r, kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, 16419 kf25=^Ah\r, kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, 16420 kf3=^AB\r, kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, 16421 kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, 16422 khome=^^, kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, 16423 mc0=\EP$<10>, mc4=^T, mc5=^R, 16424 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<10>, 16425 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., 16426 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 16427 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16428 sgr0=\EG0\EH\003$<15>, smacs=\EH^B, smam=\Ed/, smir=\Eq, 16429 smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<5>, tsl=\EF, 16430ncr260wy50+wpp|NCR 2900_260 wyse 50+ wide mode, 16431 cols#132, 16432 cup=\Ea%i%p1%dR%p2%dC$<30>, 16433 is2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 16434 rs2=\Ee6\E~"$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<200>, 16435 use=ncr260wy50+pp, 16436ncr260wy60pp|NCR 2900_260 wyse 60, 16437 am, bw, hs, km, mc5i, mir, msgr, xon, 16438 cols#80, lines#24, nlab#32, 16439 acsc=07a?h;j5k3l2m1n8q\:t4u9v=w0x6, bel=^G, blink=\EG2, 16440 cbt=\EI$<15>, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, 16441 cr=^M, cub1=\010$<5>, cud1=\n$<5>, cuf1=\014$<5>, 16442 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<10>, cuu1=\013$<5>, 16443 cvvis=\E`5, dch1=\EW$<50>, dl1=\ER$<5>, dsl=\E`c, 16444 ed=\Ey$<5>, el=\Et$<5>, fsl=^M, home=\036$<25>, 16445 ht=\011$<15>, hts=\E1$<15>, il1=\EE$<5>, ind=\n$<5>, 16446 invis=\EG1, 16447 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16448 kDC=\ER, kEND=\EY, kHOM=\E{, kNXT=\EK, kPRT=\E7, kPRV=\EJ, 16449 kRIT=^L, ka1=^^, kb2=\EJ, kbs=^H, kc1=\ET, kc3=\EK, 16450 kcbt=\EI$<15>, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 16451 kdch1=\EW, kend=\ET, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 16452 kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, kf16=^AO\r, 16453 kf17=^A`\r, kf18=^Aa\r, kf19=^Ab\r, kf2=^AA\r, kf20=^Ac\r, 16454 kf21=^Ad\r, kf22=^Ae\r, kf23=^Af\r, kf24=^Ag\r, kf25=^Ah\r, 16455 kf26=^Ai\r, kf27=^Aj\r, kf28=^Ak\r, kf29=^Al\r, kf3=^AB\r, 16456 kf30=^Am\r, kf31=^An\r, kf32=^Ao\r, kf4=^AC\r, kf5=^AD\r, 16457 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 16458 kich1=\Eq, knp=\EK, kpp=\EJ, kprt=\EP, mc0=\EP, mc4=^T, mc5=^R, 16459 mrcup=\Ew@%p1%{48}%+%c%p2%{32}%+%c%p3%{32}%+%c$<30>, 16460 nel=\037$<5>, rev=\EG4, ri=\Ej$<5>, rmacs=\EH^C, rmam=\Ed., 16461 rmir=\Er, rmso=\EG0, rmul=\EG0, rmxon=\Ec20, 16462 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`\:\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16463 sgr0=\EG0\EcB0\EcD$<15>, smacs=\EH^B, smam=\Ed/, 16464 smir=\Eq, smso=\EGt, smul=\EG8, smxon=\Ec21, tbc=\E0$<15>, 16465 tsl=\EF, 16466ncr260wy60wpp|NCR 2900_260 wyse 60 wide mode, 16467 cols#132, 16468 cup=\Ea%i%p1%dR%p2%dC$<30>, 16469 is2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16470 rs2=\Ee6\E~4$<100>\E+\Ed/\Ee1\Ed*\Er\EO\E`1\E`;\E`@\E~!\E"\Ee4\Ex@\E`9\Ee7$<100>, 16471 use=ncr260wy60pp, 16472ncr160vppp|NCR 2900_160 viewpoint, 16473 use=ncr260vppp, 16474ncr160vpwpp|NCR 2900_160 viewpoint wide mode, 16475 use=ncr260vpwpp, 16476ncr160vt100an|NCR 2900_160 vt100 with ansi kybd, 16477 use=ncr260vt100an, 16478ncr160vt100pp|NCR 2900_160 vt100 with PC+ kybd, 16479 use=ncr260vt100pp, 16480ncr160vt100wan|NCR 2900_160 vt100 wide mode ansi kybd, 16481 use=ncr260vt100wan, 16482ncr160vt100wpp|NCR 2900_160 vt100 wide mode pc+ kybd, 16483 use=ncr260vt100wpp, 16484ncr160vt200an|NCR 2900_160 vt200 with ansi kybd, 16485 use=ncr260vt200an, 16486ncr160vt200pp|NCR 2900_160 vt200 with pc+ kybd, 16487 use=ncr260vt200pp, 16488ncr160vt200wan|NCR 2900_160 vt200 wide mode ansi kybd, 16489 use=ncr260vt200wan, 16490ncr160vt200wpp|NCR 2900_160 vt200 wide mode pc+ kybd, 16491 use=ncr260vt200wpp, 16492ncr160vt300an|NCR 2900_160 vt300 with ansi kybd, 16493 use=ncr260vt300an, 16494ncr160vt300pp|NCR 2900_160 vt300 with pc+ kybd, 16495 use=ncr260vt300pp, 16496ncr160vt300wan|NCR 2900_160 vt300 wide mode ansi kybd, 16497 use=ncr260vt300wan, 16498ncr160vt300wpp|NCR 2900_160 vt300 wide mode pc+ kybd, 16499 use=ncr260vt300wpp, 16500ncr160wy50+pp|NCR 2900_160 wyse 50+, 16501 use=ncr260wy50+pp, 16502ncr160wy50+wpp|NCR 2900_160 wyse 50+ wide mode, 16503 use=ncr260wy50+wpp, 16504ncr160wy60pp|NCR 2900_160 wyse 60, 16505 use=ncr260wy60pp, 16506ncr160wy60wpp|NCR 2900_160 wyse 60 wide mode, 16507 use=ncr260wy60wpp, 16508ncrvt100an|ncrvt100pp|NCR vt100 for the 2900 terminal, 16509 am, hs, mc5i, mir, msgr, xon, 16510 cols#80, it#8, lines#24, nlab#32, 16511 acsc=``aaffgghhiijjkkllmmnnqqttuuvvwwxxyyzz~~, 16512 bel=^G, blink=\E[5m$<30>, bold=\E[1m$<30>, 16513 clear=\E[2J\E[1;1H$<300>, cr=^M, 16514 csr=\E[%i%p1%d;%p2%dr$<100>, cub=\E[%p1%dD$<30>, 16515 cub1=\E[D$<2>, cud=\E[%p1%dB$<30>, cud1=\E[B$<2>, 16516 cuf=\E[%p1%dC$<30>, cuf1=\E[C$<2>, 16517 cup=\E[%i%p1%d;%p2%dH$<100>, cuu=\E[%p1%dA$<30>, 16518 cuu1=\E[A$<2>, dch=\E[%p1%dP$<40>, dch1=\E[1P$<10>, 16519 dl=\E[%p1%dM$<70>, dl1=\E[M$<40>, dsl=\E[31l$<25>, 16520 ed=\E[0J$<300>, el=\E[0K$<30>, el1=\E[1K$<30>, 16521 enacs=\E(B\E)0$<40>, fsl=1$<10>, home=\E[H$<2>$<80>, 16522 ht=^I, hts=\EH, il=\E[%p1%dL$<80>, il1=\E[B\E[L$<80>, 16523 ind=\ED, 16524 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3l\E(B\E)0$<200>, 16525 kLFT=\E[D, kRIT=\E[C, ka1=\E[H, kbs=^H, kcub1=\E[D, 16526 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kent=^M, kf1=\EOP, 16527 kf2=\EOQ, kf3=\EOR, kf4=\EOS, mc0=\E[i$<100>, nel=\EE, 16528 rc=\E8, rev=\E[7m$<30>, ri=\EM$<50>, rmacs=\017$<90>, 16529 rmir=\E[4l$<80>, rmso=\E[0m$<30>, rmul=\E[0m$<30>, 16530 rs2=\Ec\E[12;31h\E[?3;4;5;10l\E[?6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>, 16531 sc=\E7, 16532 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<100>, 16533 sgr0=\017\E[0m$<120>, smacs=\016$<90>, smir=\E[4h$<80>, 16534 smso=\E[7m$<30>, smul=\E[4m$<30>, tbc=\E[3g$<40>, 16535 tsl=\E[>+1$<70>, 16536ncrvt100wan|NCRVT100WPP|ncrvt100wpp|NCR VT100 emulation of the 2900 terminal, 16537 cols#132, 16538 is2=\E[12h\E[?10l\E%/0n\E[P\031\E[?3h\E(B\E)0$<200>, 16539 rs2=\Ec\E[12;31h\E[?4;5;10l\E?3;6;7;19;25h\E[33;34l\E[0m\E(B\E)0\E%/0n\E[P\031$<200>, 16540 use=ncrvt100an, 16541# 16542# Vendor-supplied NCR termcaps end here 16543 16544# NCR7900 DIP switches: 16545# 16546# Switch A: 16547# 1-4 - Baud Rate 16548# 5 - Parity (Odd/Even) 16549# 6 - Don't Send or Do Send Spaces 16550# 7 - Parity Enable 16551# 8 - Stop Bits (One/Two) 16552# 16553# Switch B: 16554# 1 - Upper/Lower Shift 16555# 2 - Typewriter Shift 16556# 3 - Half Duplex / Full Duplex 16557# 4 - Light/Dark Background 16558# 5-6 - Carriage Return Without / With Line Feed 16559# 7 - Extended Mode 16560# 8 - Suppress Keyboard Display 16561# 16562# Switch C: 16563# 1 - End of line entry disabled/enabled 16564# 2 - Conversational mode / (Local?) Mode 16565# 3 - Control characters displayed / not displayed 16566# 4 - (2-wire?) / 4-wire communications 16567# 5 - RTS on and off for each character 16568# 6 - (50Hz?) / 60 Hz 16569# 7 - Exit after level zero diagnostics 16570# 8 - RS-232 interface 16571# 16572# Switch D: 16573# 1 - Reverse Channel (yes / no) 16574# 2 - Manual answer (no / yes) 16575# 3-4 - Cursor appearance 16576# 5 - Communication Rate 16577# 6 - Enable / Disable EXT turnoff 16578# 7 - Enable / Disable CR turnoff 16579# 8 - Enable / Disable backspace 16580# 16581# Since each attribute parameter is 0 or 1, we shift each attribute (standout, 16582# reverse, blink, dim, and underline) the appropriate number of bits (by 16583# multiplying the 0 or 1 by a correct factor to shift) so the bias character, 16584# '@' is (effectively) "or"ed with each attribute to generate the proper third 16585# character in the <ESC>0 sequence. The <sgr> string implements the following 16586# equation: 16587# 16588# ((((('@' + P5) | (P4 << 1)) | (P3 << 3)) | (P2 << 4)) | (p1 * 17)) => 16589# ((((('@' + P5) + (P4 << 1)) + (P3 << 3)) + (P2 << 4)) + (p1 * 17)) 16590# 16591# Where: P1 <==> Standout attribute parameter 16592# P2 <==> Underline attribute parameter 16593# P3 <==> Reverse attribute parameter 16594# P4 <==> Blink attribute parameter 16595# P5 <==> Dim attribute parameter 16596# From <root@goliath.un.atlantaga.NCR.COM>, init string hacked by SCO. 16597ncr7900i|ncr7900|ncr 7900 model 1, 16598 am, bw, ul, 16599 cols#80, lines#24, xmc#1, 16600 bel=^G, blink=\E0B, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 16601 cup=\E1%p2%c%p1%c, cuu1=^Z, dim=\E0A, ed=\Ek, el=\EK, ind=^J, 16602 is2=\E0@\010\E3\E4\E7, kcub1=^U, kcud1=^J, kcuf1=^F, 16603 kcuu1=^Z, khome=^A, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=\E0@, 16604 rmul=\E0@, 16605 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c, 16606 sgr0=\E0@, smso=\E0Q, smul=\E0`, 16607ncr7900iv|ncr 7900 model 4, 16608 am, bw, eslok, hs, 16609 cols#80, lines#24, 16610 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, 16611 cup=\013%p1%{64}%+%c\E\005%p2%02d, dl1=\E^O, dsl=\Ey1, 16612 fsl=\Ek\Ey5, home=\013@\E^E00, il1=\E^N, ind=^J, kbs=^H, 16613 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\ES, kf2=\ET, 16614 kf3=\EU, kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, 16615 khome=\EH, lf6=blue, lf7=red, lf8=white, nel=^M^J, 16616 tsl=\Ej\Ex5\Ex1\EY8%p1%{32}%+%c\Eo, 16617# Warning: This terminal will lock out the keyboard when it receives a CTRL-D. 16618# The user can enter a CTRL-B to get out of this locked state. 16619# In <hpa>, we want to output the character given by the formula: 16620# ((col / 10) * 16) + (col % 10) where "col" is "p1" 16621ncr7901|ncr 7901 model, 16622 am, bw, ul, 16623 cols#80, lines#24, 16624 bel=^G, blink=\E0B, civis=^W, clear=^L, cnorm=^X, cr=^M, 16625 cub1=^H, cud1=^J, cuf1=^F, 16626 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, dim=\E0A, 16627 ed=\Ek, el=\EK, 16628 hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, ind=^J, 16629 is2=\E4^O, kclr=^L, kcub1=^U, kcud1=^J, kcuf1=^F, kcuu1=^Z, 16630 khome=^H, ll=^A, mc4=^T, mc5=^R, rev=\E0P, rmso=^O, rmul=^O, 16631 sgr=\E0%p5%{64}%+%p4%{2}%*%+%p3%{16}%*%+%p2%{32}%*%+%p1%{17}%*%+%c\016, 16632 sgr0=^O, smso=\E0Q\016, smul=\E0`\016, 16633 vpa=\013%p1%{64}%+%c, 16634 16635# Newbury Data Recording Limited (Newbury Data) 16636# 16637# Have been manufacturing and reselling various peripherals for a long time 16638# They don't make terminals anymore, but are still in business (in 2007). 16639# Their e-mail address is at ndsales@newburydata.co.uk 16640# and their post address is: 16641# 16642# Newbury Data Recording Ltd, 16643# Premier Park, Road One, 16644# Winsford, Cheshire, CW7 3PT 16645# 16646# Their technical support is still good, they sent me for free a printed copy 16647# of the 9500 user manual and I got it just 1 week after I first contacted them 16648# (in 2005)! 16649 16650# NDR 9500 16651# Manufactured in the early/mid eighties, behaves almost the same as a 16652# Televideo 950. Take a 950, change its cabinet for a more 80s-ish one (but 16653# keep the same keyboard layout), add an optional 25-line mode, replace the DIP 16654# switches with a menu and remove the "lock line" feature (ESC ! 1 and ESC ! 16655# 2), here is the NDR 9500. Even the line-lock, albeit disabled, is 16656# recognized: if you type in "ESC !", the next (third) character is not 16657# echoed, showing that the terminal was actually waiting for a parameter! 16658ndr9500|nd9500|Newbury Data 9500, 16659 am, bw, hs, mc5i, mir, msgr, ul, xon, 16660 cols#80, lines#24, wsl#79, 16661 acsc=jDkClBmAnIqKtMuLvOwNxJ, bel=^G, cbt=\EI, civis=\E.0, 16662 clear=\E;, cnorm=\E.1, cr=^M, cub1=^H, cud1=^V, cuf1=^L, 16663 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 16664 dim=\E), dl1=\ER, dsl=\Eh, ed=\EY, el=\ET, 16665 flash=\Eb$<50/>\Ed, fsl=^M, home=^^, ht=^I, hts=\E1, 16666 ich1=\EQ, il1=\EE, ind=^J, is2=\Ew\E'\EDF\El\Er\EO, 16667 kDC=\Er, kDL=\EO, kEOL=\Et, kIC=\Eq, kcbt=\EI, kclr=^Z, 16668 kcub1=^H, kcud1=^V, kcuf1=^L, kcuu1=^K, kdch1=\EW, kdl1=\ER, 16669 ked=\EY, kel=\ET, kent=^M, kf1=^A@\r, kf10=^AI\r, kf11=^AJ\r, 16670 kf12=^A`\r, kf13=^Aa\r, kf14=^Ab\r, kf15=^Ac\r, kf16=^Ad\r, 16671 kf17=^Ae\r, kf18=^Af\r, kf19=^Ag\r, kf2=^AA\r, kf20=^Ah\r, 16672 kf21=^Ai\r, kf22=^Aj\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 16673 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 16674 kich1=\EQ, kil1=\EE, kprt=\EP, mc4=\Ea, mc5=\E`, nel=^_, 16675 pfloc=\E|%{48}%p1%+%c2%p2\031, 16676 pfx=\E|%{48}%p1%+%c1%p2\031, prot=\E), ri=\Ej, 16677 rmacs=\E%%, rmir=\Er, rmso=\E(, rmxon=^N, 16678 sgr=\EG0\E%%%%\E(%?%p1%p5%p8%|%|%t\E)%;%?%p9%t\E$%;, 16679 sgr0=\EG0\E%%\E(, smacs=\E$, smir=\Eq, smso=\E), smxon=^O, 16680 tbc=\E3, tsl=\Eg\Ef\011%p1%{32}%+%c, .kbs=^H, 16681 16682ndr9500-nl|NDR 9500 with no status line, 16683 hs@, 16684 wsl@, 16685 dsl@, fsl@, tsl@, use=ndr9500, 16686 16687ndr9500-25|NDR 9500 with 25th line enabled, 16688 lines#25, use=ndr9500, 16689 16690ndr9500-25-nl|NDR 9500 with 25 lines and no status line, 16691 lines#25, use=ndr9500-nl, 16692 16693ndr9500-mc|NDR 9500 with magic cookies (enables underline inverse video invisible and blink), 16694 msgr@, 16695 xmc#1, 16696 blink=\EG2, invis=\EG1, rev=\EG4, rmso=\EG0, rmul=\EG0, 16697 sgr=\E%%\E(%?%p5%p8%|%t\E)%;%?%p9%t\E$%;\EG%{48}%?%p7%t%{1}%+%;%?%p4%t%{2}%+%;%?%p3%p1%|%t%{4}%+%;%?%p2%t%{8}%+%;%c, 16698 sgr0=\EG0\E%%\E(, smso=\EG4, smul=\EG8, use=ndr9500, 16699 16700ndr9500-25-mc|NDR 500 with 25 lines and magic cookies, 16701 lines#25, use=ndr9500-mc, 16702 16703ndr9500-mc-nl|NDR 9500 with magic cookies and no status line, 16704 hs@, 16705 wsl@, 16706 dsl@, fsl@, tsl@, use=ndr9500-mc, 16707 16708ndr9500-25-mc-nl|NDR 9500 with 25 lines and magic cookies and no status line, 16709 lines#25, use=ndr9500-mc-nl, 16710 16711#### Perkin-Elmer (Owl) 16712# 16713# These are official terminfo entries from within Perkin-Elmer. 16714# 16715 16716bantam|pe550|pe6100|perkin elmer 550, 16717 OTbs, 16718 cols#80, lines#24, 16719 bel=^G, clear=\EK$<20>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 16720 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 16721 el=\EI$<20>, home=\EH, ind=^J, ll=\EH\EA, 16722fox|pe1100|perkin elmer 1100, 16723 OTbs, am, 16724 cols#80, lines#24, 16725 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J, 16726 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 16727 ed=\EJ$<5.5*>, el=\EI, flash=\020\002$<200/>\020\003, 16728 home=\EH, hts=\E1, ind=^J, ll=\EH\EA, tbc=\E3, 16729owl|pe1200|perkin elmer 1200, 16730 OTbs, am, in, 16731 cols#80, lines#24, 16732 bel=^G, clear=\EH\EJ$<132>, cr=^M, cub1=^H, cud1=^J, 16733 cuf1=\EC, cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 16734 dch1=\EO$<5.5*>, dl1=\EM$<5.5*>, ed=\EJ$<5.5*>, 16735 el=\EI$<5.5>, flash=\020\002$<200/>\020\003, home=\EH, 16736 hts=\E1, ich1=\EN, il1=\EL$<5.5*>, ind=^J, ip=$<5.5*>, 16737 kbs=^H, kf0=\ERJ, kf1=\ERA, kf2=\ERB, kf3=\ERC, kf4=\ERD, 16738 kf5=\ERE, kf6=\ERF, kf7=\ERG, kf8=\ERH, kf9=\ERI, ll=\EH\EA, 16739 rmso=\E!\0, sgr0=\E!\0, smso=\E!^H, tbc=\E3, 16740pe1251|pe6300|pe6312|perkin elmer 1251, 16741 am, 16742 cols#80, it#8, lines#24, pb#300, vt#8, xmc#1, 16743 bel=^G, clear=\EK$<332>, cr=^M, cub1=\ED, cud1=\EB, cuf1=\EC, 16744 cup=\EX%p1%{32}%+%c\EY%p2%{32}%+%c, cuu1=\EA, 16745 ed=\EJ$<20*>, el=\EI$<10*>, home=\EH, hts=\E1, ind=^J, 16746 kf0=\ERA, kf1=\ERB, kf10=\ERK, kf2=\ERC, kf3=\ERD, kf4=\ERE, 16747 kf5=\ERF, kf6=\ERG, kf7=\ERH, kf8=\ERI, kf9=\ERJ, tbc=\E3, 16748# (pe7000m: this had 16749# rmul=\E!\0, smul=\E!\040, 16750# which is probably wrong, it collides with kf0 16751pe7000m|perkin elmer 7000 series monochrome monitor, 16752 am, 16753 cols#80, lines#24, 16754 bel=^G, cbt=\E!Y, clear=\EK, cr=^M, cub1=\ED, cud1=\EB, 16755 cuf1=\EC, cup=\ES%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 16756 ed=\EJ, el=\EI, home=\EH, ind=^J, 16757 is1=\E!\0\EW 7o\Egf\ES7\s, kbs=^H, kcub1=\E!V, 16758 kcud1=\E!U, kcuf1=\E!W, kcuu1=\E!T, kf0=\E!\0, kf1=\E!^A, 16759 kf10=\E!^J, kf2=\E!^B, kf3=\E!^C, kf4=\E!^D, kf5=\E!^E, 16760 kf6=\E!^F, kf7=\E!^G, kf8=\E!^H, kf9=\E!^I, khome=\E!S, 16761 ll=\ES7\s, ri=\ER, 16762pe7000c|perkin elmer 7000 series colour monitor, 16763 is1=\E!\0\EW 7o\Egf\Eb0\Ec7\ES7\s, rmso=\Eb0, 16764 rmul=\E!\0, smso=\Eb2, smul=\E!\s, use=pe7000m, 16765 16766#### Sperry Univac 16767# 16768# Sperry Univac has merged with Burroughs to form Unisys. 16769# 16770 16771# This entry is for the Sperry UTS30 terminal running the TTY 16772# utility under control of CP/M Plus 1R1. The functionality 16773# provided is comparable to the DEC vt100. 16774# (uts30: I added <rmam>/<smam> based on the init string -- esr) 16775uts30|sperry uts30 with cp/m@1R1, 16776 am, bw, hs, 16777 cols#80, lines#24, wsl#40, 16778 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 16779 bel=^G, blink=\E[5m, bold=\E[1m, civis=\ER, clear=^L, 16780 cnorm=\ES, cr=^M, csr=\EU%p1%{32}%+%c%p2%{32}%+%c, 16781 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 16782 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 16783 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\EM, 16784 dl=\E[%p1%dM, dl1=\EL, ed=\E[J, el=\E[K, fsl=^M, home=\E[H, 16785 ht=^I, ich=\E[%p1%d@, ich1=\EO, il=\E[%p1%dL, il1=\EN, 16786 ind=^J, indn=\E[%p1%dB, is2=\E[U 7\E[24;1H, kbs=^H, 16787 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, khome=\E[H, 16788 rc=\EX, rev=\E[7m, rf=/usr/share/tabset/vt100, ri=\EI, 16789 rin=\E[%p1%dA, rmacs=\Ed, rmam=\E[?7l, rmso=\E[m, 16790 rmul=\E[m, rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 16791 sc=\EW, sgr0=\E[m, smacs=\EF, smam=\E[?7m, smso=\E[7m, 16792 smul=\E[4m, tsl=\E], uc=\EPB, 16793 16794#### Tandem 16795# 16796# Tandem builds these things for use with its line of fault-tolerant 16797# transaction-processing computers. They aren't generally available 16798# on the merchant market, and so are fairly uncommon. 16799# 16800 16801tandem6510|adm3a repackaged by Tandem, 16802 use=adm3a, 16803 16804# A funny series of terminal that TANDEM uses. The actual model numbers 16805# have a fourth digit after 653 that designates minor variants. These are 16806# natively block-mode and rather ugly, but they have a character mode which 16807# this doubtless(?) exploits. There is a 6520 that is slightly dumber. 16808# (tandem653: had ":sb=\ES:", probably someone's mistake for sf; also, 16809# removed <if=/usr/share/tabset/tandem653>, no such file -- esr) 16810tandem653|t653x|Tandem 653x multipage terminal, 16811 OTbs, am, da, db, hs, 16812 cols#80, lines#24, wsl#64, xmc#1, 16813 clear=\EI, cub1=^H, cud1=^J, cuf1=\EC, 16814 cup=\023%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dsl=\Eo\r, 16815 ed=\EJ, el=\EK, fsl=^M, home=\EH, ind=\ES, ri=\ET, rmso=\E6\s, 16816 rmul=\E6\s, sgr0=\E6\s, smso=\E6$, smul=\E60, tsl=\Eo, 16817 16818#### Tandy/Radio Shack 16819# 16820# Tandy has a line of VDTs distinct from its microcomputers. 16821# 16822 16823dmterm|deskmate terminal, 16824 am, bw, 16825 cols#80, lines#24, 16826 bel=^G, civis=\EG5, clear=\Ej, cnorm=\EG6, cr=^M, cub1=^H, 16827 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 16828 cuu1=\EA, dch1=\ES, dl1=\ER, ed=\EJ, el=\EK, home=\EH, ht=^I, 16829 ich1=\EQ, il1=\EP, ind=\EX, invis@, kcub1=\ED, kcud1=\EB, 16830 kcuf1=\EC, kcuu1=\EA, kf0=\E1, kf1=\E2, kf2=\E3, kf3=\E4, 16831 kf4=\E5, kf5=\E6, kf6=\E7, kf7=\E8, kf8=\E9, kf9=\E0, 16832 khome=\EH, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, 16833 lf6=f7, lf7=f8, lf8=f9, lf9=f10, ll=\EE, rmul@, smul@, 16834 use=adm+sgr, 16835dt100|dt-100|Tandy DT-100 terminal, 16836 xon, 16837 cols#80, lines#24, xmc#1, 16838 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l, 16839 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 16840 csr=\E[%p1%2d;%p2%2dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 16841 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 16842 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 16843 il1=\E[L, ind=^J, is2=\E[?3l\E)0\E(B, kcub1=\E[D, 16844 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\E[?3i, 16845 kf10=\E[?5i, kf2=\E[2i, kf3=\E[@, kf4=\E[M, kf5=\E[17~, 16846 kf6=\E[18~, kf7=\E[19~, kf8=\E[20~, kf9=\E[21~, khome=\E[H, 16847 knp=\E[29~, kpp=\E[28~, lf1=f1, lf2=f2, lf3=f3, lf4=f4, lf5=f5, 16848 lf6=f6, lf7=f7, lf8=f8, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, 16849 sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, 16850dt100w|dt-100w|Tandy DT-100 terminal (wide mode), 16851 cols#132, use=dt100, 16852dt110|Tandy DT-110 emulating ansi, 16853 xon, 16854 cols#80, lines#24, 16855 acsc=jjkkllmmnnqqttuuvvwwxx, bel=^G, civis=\E[?25l, 16856 clear=\E[H\E[2J, cnorm=\E[?25h, cr=^M, 16857 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 16858 cup=\010\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[0P, 16859 dl1=\E[0M, ed=\E[0J, el=\E[0K, enacs=\E(B\E)0, home=\E[H, 16860 ht=^I, ich1=\E[0@, il1=\E[0L, ind=^J, is2=\E[?3l\E)0\E(B, 16861 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[K, 16862 kf1=\E[1~, kf10=\E[10~, kf2=\E[2~, kf3=\E[3~, kf4=\E[4~, 16863 kf5=\E[5~, kf6=\E[6~, kf7=\E[7~, kf8=\E[8~, kf9=\E[9~, 16864 khome=\E[G, kich1=\E[@, knp=\E[26~, kpp=\E[25~, lf0=f1, 16865 lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, lf7=f8, lf8=f9, 16866 lf9=f10, ri=\EM, rmacs=^O, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 16867 smacs=^N, smso=\E[7m, smul=\E[4m, 16868pt210|TRS-80 PT-210 printing terminal, 16869 hc, os, 16870 cols#80, 16871 bel=^G, cr=^M, cud1=^J, ind=^J, 16872 16873#### Tektronix (tek) 16874# 16875# Tektronix tubes are graphics terminals. Most of them use modified 16876# oscilloscope technology incorporating a long-persistence green phosphor, 16877# and support vector graphics on a main screen with an attached "dialogue 16878# area" for interactive text. 16879# 16880 16881tek|tek4012|tektronix 4012, 16882 OTbs, os, 16883 cols#75, lines#35, 16884 bel=^G, clear=\E\014$<1000>, cr=^M, cub1=^H, cud1=^J, 16885 ff=\014$<1000>, is2=\E^O, 16886# (tek4013: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 16887tek4013|tektronix 4013, 16888 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4012, 16889tek4014|tektronix 4014, 16890 cols#81, lines#38, 16891 is2=\E\017\E9, use=tek4012, 16892# (tek4015: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 16893tek4015|tektronix 4015, 16894 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014, 16895tek4014-sm|tektronix 4014 in small font, 16896 cols#121, lines#58, 16897 is2=\E\017\E\:, use=tek4014, 16898# (tek4015-sm: added <acsc> to suppress tic warnings re <smacs>/<rmacs> --esr) 16899tek4015-sm|tektronix 4015 in small font, 16900 acsc=, rmacs=\E^O, smacs=\E^N, use=tek4014-sm, 16901# Tektronix 4023 from Andrew Klossner <orca!andrew.tektronix@csnet-relay> 16902# 16903# You need to have "stty nl2" in effect. Some versions of tset(1) know 16904# how to set it for you. 16905# 16906# It's got the Magic Cookie problem around stand-out mode. If you can't 16907# live with Magic Cookie, remove the :so: and :se: fields and do without 16908# reverse video. If you like reverse video stand-out mode but don't want 16909# it to flash, change the letter 'H' to 'P' in the :so: field. 16910tek4023|tektronix 4023, 16911 OTbs, am, 16912 OTdN#4, cols#80, lines#24, vt#4, xmc#1, 16913 OTnl=^J, bel=^G, clear=\E\014$<4/>, cr=^M, cub1=^H, cud1=^J, 16914 cuf1=^I, cup=\034%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, 16915 rmso=^_@, smso=^_P, 16916# It is recommended that you run the 4025 at 4800 baud or less; 16917# various bugs in the terminal appear at 9600. It wedges at the 16918# bottom of memory (try "cat /usr/dict/words"); ^S and ^Q typed 16919# on keyboard don't work. You have to hit BREAK twice to get 16920# one break at any speed - this is a documented feature. 16921# Can't use cursor motion because it's memory relative, and 16922# because it only works in the workspace, not the monitor. 16923# Same for home. Likewise, standout only works in the workspace. 16924# 16925# <el> was commented out since vi and rogue seem to work better 16926# simulating it with lots of spaces! 16927# 16928# <il1> and <il> had 145ms of padding, but that slowed down vi's ^U 16929# and didn't seem necessary. 16930# 16931tek4024|tek4025|tek4027|tektronix 4024/4025/4027, 16932 OTbs, am, da, db, 16933 cols#80, it#8, lines#34, lm#0, 16934 bel=^G, clear=\037era\r\n\n, cmdch=^_, cr=^M, 16935 cub=\037lef %p1%d\r, cub1=^H, cud=\037dow %p1%d\r, 16936 cud1=^F^J, cuf=\037rig %p1%d\r, cuf1=\037rig\r, 16937 cuu=\037up %p1%d\r, cuu1=^K, dch1=\037dch\r, 16938 dl=\037dli %p1%d\r\006, dl1=\037dli\r\006, 16939 ed=\037dli 50\r, ht=^I, ich1=\037ich\r \010, 16940 il=\037up\r\037ili %p1%d\r, il1=\037up\r\037ili\r, 16941 ind=^F^J, 16942 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, 16943 rmkx=\037lea p2\r\037lea p4\r\037lea p6\r\037lea p8\r\037lea f5\r, 16944 smkx=\037lea p4 /h/\r\037lea p8 /k/\r\037lea p6 / /\r\037lea p2 /j/\r\037lea f5 /H/\r, 16945tek4025-17|tek 4025 17 line window, 16946 lines#17, use=tek4025, 16947tek4025-17-ws|tek 4025 17 line window in workspace, 16948 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r\037wor 17\r\037mon 17\r, 16949 rmcup=\037mon h\r, rmso=\037att s\r, smcup=\037wor h\r, 16950 smso=\037att e\r, use=tek4025-17, 16951tek4025-ex|tek4027-ex|tek 4025/4027 w/!, 16952 is2=\037com 33\r\n!sto 9 17 25 33 41 49 57 65 73\r, 16953 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025, 16954# Tektronix 4025a 16955# From: Doug Gwyn <gwyn@brl-smoke.ARPA> 16956# The following status modes are assumed for normal operation (replace the 16957# initial "!" by whatever the current command character is): 16958# !COM 29 # NOTE: changes command character to GS (^]) 16959# ^]DUP 16960# ^]ECH R 16961# ^]EOL 16962# ^]RSS T 16963# ^]SNO N 16964# ^]STO 9 17 25 33 41 49 57 65 73 16965# Other modes may be set according to communication requirements. 16966# If the command character is inadvertently changed, termcap can't restore it. 16967# Insert-character cannot be made to work on both top and bottom rows. 16968# Clear-to-end-of-display emulation via !DLI 988 is too grotty to use, alas. 16969# There also seems to be a problem with vertical motion, perhaps involving 16970# delete/insert-line, following a typed carriage return. This terminal sucks. 16971# Delays not specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 16972# (tek4025a: removed obsolete ":xx:". This may mean the tek4025a entry won't 16973# work any more. -- esr) 16974tek4025a|Tektronix 4025A, 16975 OTbs, OTpt, am, bw, da, db, xon, 16976 cols#80, it#8, lines#34, 16977 bel=^G, cbt=\035bac;, clear=\035era;\n\035rup;, cmdch=^], 16978 cr=^M, cub=\035lef %p1%d;, cub1=^H, cud=\035dow %p1%d;, 16979 cud1=^J, cuf=\035rig %p1%d;, cuf1=\035rig;, 16980 cuu=\035up %p1%d;, cuu1=^K, dch=\035dch %p1%d;, 16981 dch1=\035dch;, dl=\035dli %p1%d;, dl1=\035dli;, 16982 el=\035dch 80;, hpa=\r\035rig %p1%d;, ht=^I, 16983 il1=\013\035ili;, ind=^J, indn=\035dow %p1%d;, 16984 rs2=!com 29\035del 0\035rss t\035buf\035buf n\035cle\035dis\035dup\035ech r\035eol\035era g\035for n\035pad 203\035pad 209\035sno n\035sto 9 17 25 33 41 49 57 65 73\035wor 0;, 16985 tbc=\035sto;, 16986# From: cbosg!teklabs!davem Wed Sep 16 21:11:41 1981 16987# Here's the command file that I use to get rogue to work on the 4025. 16988# It should work with any program using the old curses (e.g. it better 16989# not try to scroll, or cursor addressing won't work. Also, you can't 16990# see the cursor.) 16991# (This "learns" the arrow keys for rogue. I have adapted it for termcap - mrh) 16992tek4025-cr|tek 4025 for curses and rogue, 16993 OTbs, am, 16994 cols#80, it#8, lines#33, 16995 clear=\037era;, cub1=^H, cud1=^F^J, cuf1=\037rig;, 16996 cup=\037jum%i%p1%d\,%p2%d;, cuu1=^K, ht=^I, ind=^F^J, 16997 is2=!com 31\r\n\037sto 9 17 25 33 41 49 57 65 73\r, 16998 rmcup=\037wor 0, smcup=\037wor 33h, 16999# next two lines commented out since curses only allows 128 chars, sigh. 17000# :ti=\037lea p1/b/\037lea p2/j/\037lea p3/n/\037lea p4/h/\037lea p5/ /\037lea p6/l/\037lea p7/y/\037lea p8/k/\037lea p9/u/\037lea p./f/\037lea pt/`era w/13\037lea p0/s/\037wor 33h:\ 17001# :te=\037lea p1\037lea p2\037lea p3\037lea p4\037lea pt\037lea p5\037lea p6\037lea p7\037lea p8\037lea p9/la/13\037lea p.\037lea p0\037wor 0: 17002tek4025ex|4025ex|4027ex|tek 4025 w/!, 17003 is2=\037com 33\r\n!sto 9\,17\,25\,33\,41\,49\,57\,65\,73\r, 17004 rmcup=\037com 33\r, smcup=!com 31\r, use=tek4025, 17005tek4105|tektronix 4105, 17006 OTbs, am, mir, msgr, ul, xenl, xt, 17007 cols#79, it#8, lines#29, 17008 acsc=, bel=^G, blink=\E[=3;<7m, bold=\E[=7;<4m, cbt=\E[Z, 17009 clear=\E[2J\E[H, cr=^M, cub1=\E[1D, cud1=\E[1B, cuf1=\E[1C, 17010 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[1A, dch1=\E[1P, 17011 dim=\E[=1;<6m, dl1=\E[1M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 17012 il1=\E[1L, ind=\E[S, invis=\E[=6;<5, is1=\E%!1\E[m, 17013 is2=\E%!1\E[?6141\E[m, kbs=^H, kcub1=\E[1D, kcud1=\E[1B, 17014 kcuf1=\E[1C, kcuu1=\E[1A, rev=\E[=1;<3m, ri=\E[T, 17015 rmacs=\E[m, rmcup=, rmir=\E[4l, rmso=\E[=0;<1m, 17016 rmul=\E[=0;<1m, sgr0=\E[=0;<1m, smacs=\E[1m, 17017 smcup=\E%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, 17018 smul=\E[=5;<2m, tbc=\E[1g, 17019 17020# (tek4105-30: I added <rmam>/<smam> based on the init string -- esr) 17021tek4105-30|4015 emulating 30 line vt100, 17022 am, mir, msgr, xenl, xon, 17023 cols#80, it#8, lines#30, vt#3, 17024 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 17025 bel=^G, blink=\E[5m$<2>, bold=\E[1m$<2>, 17026 clear=\E[H\E[J$<50>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 17027 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 17028 cuf=\E[%p1%dC, cuf1=\E[C$<2>, 17029 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 17030 cuu1=\E[A$<2>, ed=\E[J$<50>, el=\E[K$<3>, el1=\E[1K$<3>, 17031 enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, 17032 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rc=\E8, 17033 rev=\E[7m$<2>, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 17034 rmkx=\E[?1l\E>, rmso=\E[m$<2>, rmul=\E[m$<2>, 17035 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 17036 sgr=\E[0%?%p1%p6%|%t;1%;%?%p2%t;4%;%?%p1%p3%|%t;7%;%?%p4%t;5%;m%?%p9%t\016%e\017%;$<2>, 17037 sgr0=\E[m\017$<2>, smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, 17038 smso=\E[1;7m$<2>, smul=\E[4m$<2>, tbc=\E[3g, 17039 use=vt100+fnkeys, 17040 17041# Tektronix 4105 from BRL 17042# The following setup modes are assumed for normal operation: 17043# CODE ansi CRLF no DABUFFER 141 17044# DAENABLE yes DALINES 30 DAMODE replace 17045# DAVISIBILITY yes ECHO no EDITMARGINS 1 30 17046# FLAGGING input INSERTREPLACE replace LFCR no 17047# ORIGINMODE relative PROMPTMODE no SELECTCHARSET G0 B 17048# SELECTCHARSET G1 0 TABS -2 17049# Other setup modes may be set for operator convenience or communication 17050# requirements; I recommend 17051# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes 17052# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0 17053# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU> 17054# GAMODE overstrike GCURSOR 0 100 0 GSPEED 10 1 17055# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>" 17056# PROMPTSTRING '' QUEUESIZE 2460 WINDOW 0 0 4095 3132 17057# XMTDELAY 0 17058# and factory color maps. After setting these modes, save them with NVSAVE. No 17059# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 17060# "IC" cannot be used in combination with "im" & "ei". 17061# "tek4105a" is just a guess: 17062tek4105a|Tektronix 4105, 17063 OTbs, OTpt, msgr, xon, 17064 OTkn#8, cols#80, it#8, lines#30, vt#3, 17065 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 17066 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, 17067 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, 17068 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 17069 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 17070 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, 17071 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 17072 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 17073 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, 17074 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 17075 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, 17076 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, 17077 lf5=F6, lf6=F8, ll=\E[30;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 17078 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, 17079 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 17080 rs2=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLA>\ELM0\EKE0\ENF1\EKS0\END0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, 17081 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, 17082 smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 17083 17084# 17085# Tektronix 4106/4107/4109 from BRL 17086# The following setup modes are assumed for normal operation: 17087# CODE ansi COLUMNMODE 80 CRLF no 17088# DABUFFER 141 DAENABLE yes DALINES 32 17089# DAMODE replace DAVISIBILITY yes ECHO no 17090# EDITMARGINS 1 32 FLAGGING input INSERTREPLACE replace 17091# LFCR no LOCKKEYBOARD no ORIGINMODE relative 17092# PROMPTMODE no SELECTCHARSET G0 B SELECTCHARSET G1 0 17093# TABS -2 17094# Other setup modes may be set for operator convenience or communication 17095# requirements; I recommend 17096# ACURSOR 1 0 AUTOREPEAT yes AUTOWRAP yes 17097# BYPASSCANCEL <LF> CURSORKEYMODE no DAINDEX 1 0 0 17098# EOFSTRING '' EOLSTRING <CR> EOMCHARS <CR> <NU> 17099# GAMODE overstrike GCURSOR 0 100 0 GSPEED 9 3 17100# IGNOREDEL no KEYEXCHAR <DL> NVDEFINE -53 "<NU>" 17101# PROMPTSTRING '' QUEUESIZE 2620 WINDOW 0 0 4095 3132 17102# XMTDELAY 0 17103# and factory color maps. After setting these modes, save them with NVSAVE. No 17104# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 17105# "IC" cannot be used in combination with "im" & "ei". 17106tek4106brl|tek4107brl|tek4109brl|Tektronix 4106 4107 or 4109, 17107 msgr, xon, 17108 cols#80, it#8, lines#32, vt#3, 17109 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, 17110 civis=\E%!0\ETD00\E%!1, clear=\E[H\E[J, 17111 cnorm=\E%!0\ETD10\E%!1, cr=^M, csr=\E[%i%p1%d;%p2%dr, 17112 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 17113 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 17114 cuu=\E[%p1%dA, cuu1=\EM, cvvis=\E%!0\ETD70\E%!1, 17115 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 17116 ech=\E[%p1%dX, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 17117 il=\E[%p1%dL, il1=\E[L, ind=^J, indn=\E[%p1%dS, is2=\E%!1, 17118 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 17119 kf0=\EOA, kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EOP, kf5=\EOQ, 17120 kf6=\EOR, kf7=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, lf4=F5, 17121 lf5=F6, lf6=F8, ll=\E[32;H, nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, 17122 rin=\E[%p1%dT, rmacs=^O, rmcup=\E%!0\ELBH=\E%!1, 17123 rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 17124 rs1=\030\E%!0\EKC\E\014\EKR0\EKF0\ENM0\ELBH=\ETF8000010F40\ELI100\ELLB0\ELM0\EKE0\ENF1\EKS0\END0\ERE0\E%!1\Ec\E[?3;5l\E[?7;8h\E[r\E[m\E>, 17125 sc=\E7, sgr0=\E[m, smacs=^N, smcup=\E[?6l, smir=\E[4h, 17126 smkx=\E[?1h\E=, smso=\E[7;42m, smul=\E[4m, tbc=\E[3g, 17127 17128# Tektronix 4107/4109 interpret 4 modes using "\E%!" followed by a code: 17129# 0 selects Tek mode, i.e., \E%!0 17130# 1 selects ANSI mode 17131# 2 selects ANSI edit-mode 17132# 3 selects VT52 mode 17133# 17134# One odd thing about the description (which has been unchanged since the 90s) 17135# is that the cursor addressing is using VT52 mode, and a few others use the 17136# VT52's non-CSI versions of ANSI, e.g., \EJ. 17137tek4107|tek4109|tektronix terminals 4107 4109, 17138 OTbs, am, mir, msgr, ul, xenl, xt, 17139 cols#79, it#8, lines#29, 17140 bel=^G, blink=\E%!1\E[5m$<2>\E%!0, 17141 bold=\E%!1\E[1m$<2>\E%!0, clear=\ELZ, cnorm=\E%!0, cr=^M, 17142 cub1=^H, cud1=^J, cuf1=\EC, 17143 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\E%!3, 17144 dim=\E%!1\E[<0m$<2>\E%!0, ed=\EJ, el=\EK, ht=^I, ind=^J, 17145 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 17146 rev=\E%!1\E[7m$<2>\E%!0, ri=\EI, 17147 rmso=\E%!1\E[m$<2>\E%!0, rmul=\E%!1\E[m$<2>\E%!0, 17148 sgr=\E%%!1\E[%?%p1%t;7;5%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p5%t<0%;%?%p6%t;1%;m$<2>\E%%!0, 17149 sgr0=\E%!1\E[m$<2>\E%!0, smso=\E%!1\E[7;5m$<2>\E%!0, 17150 smul=\E%!1\E[4m$<2>\E%!0, 17151# Tektronix 4207 with sysline. In the ancestral termcap file this was 4107-s; 17152# see the note attached to tek4207. 17153tek4207-s|Tektronix 4207 with sysline but no memory, 17154 eslok, hs, 17155 dsl=\E7\E[?6l\E[2K\E[?6h\E8, fsl=\E[?6h\E8, 17156 is1=\E%!1\E[2;32r\E[132D\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, 17157 is2=\E7\E[?6l\E[2K\E[?6h\E8, 17158 tsl=\E7\E[?6l\E[2K\E[;%i%df, use=tek4107, 17159 17160# The 4110 series may be a wonderful graphics series, but they make the 4025 17161# look good for screen editing. In the dialog area, you can't move the cursor 17162# off the bottom line. Out of the dialog area, ^K moves it up, but there 17163# is no way to scroll. 17164# 17165# Note that there is a floppy for free from Tek that makes the 17166# 4112 emulate the vt52 (use the vt52 termcap). There is also 17167# an expected enhancement that will use ANSI standard sequences. 17168# 17169# 4112 in non-dialog area pretending to scroll. It really wraps 17170# but vi is said to work (more or less) in this mode. 17171# 17172# 'vi' works reasonably well with this entry. 17173# 17174otek4112|o4112-nd|otek4113|otek4114|old tektronix 4110 series, 17175 am, 17176 cols#80, lines#34, 17177 bel=^G, clear=\E^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ind=^J, 17178 rmcup=\EKA1\ELV1, smcup=\EKA0\ELV0\EMG0, 17179# The 4112 with the ANSI compatibility enhancement 17180tek4112|tek4114|tektronix 4110 series, 17181 OTbs, am, db, 17182 cols#80, lines#34, 17183 cbt=\E[Z, clear=\E[2J\E[0;0H, cub1=^H, cud1=\E[B, 17184 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\EM, dch1=\E[P, 17185 dl1=\E[M, ed=\E[0J, el=\E[0K, ich1=\E[@, il1=\E[L, 17186 ind=\E7\E[0;0H\E[M\E8, is2=\E3!1, ri=\E7\E[0;0H\E[L\E8, 17187 rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, smul=\E[4m, 17188tek4112-nd|4112 not in dialog area, 17189 OTns, 17190 cuu1=^K, use=tek4112, 17191tek4112-5|4112 in 5 line dialog area, 17192 lines#5, use=tek4112, 17193# (tek4113: this used to have "<cuf1=\LM1\s\LM0>", someone's mistake; 17194# removed "<smacs=\E^N>, <rmacs=\E^O>", which had been commented out in 8.3. 17195# Note, the !0 and !1 sequences in <rmcup>/<smcup>/<cnorm>/<civis> were 17196# previously \0410 and \0411 sequences...I don't *think* they were supposed 17197# to be 4-digit octal -- esr) 17198tek4113|tektronix 4113 color graphics with 5 line dialog area, 17199 OTbs, am, da, eo, 17200 cols#80, lines#5, 17201 clear=\ELZ, cub1=^H, cud1=^J, cuf1=\ELM1 \ELM0, 17202 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, 17203 is2=\EKA1\ELL5\ELV0\ELV1, uc=\010\ELM1_\ELM0, 17204tek4113-34|tektronix 4113 color graphics with 34 line dialog area, 17205 lines#34, 17206 is2=\EKA1\ELLB2\ELV0\ELV1, use=tek4113, 17207# :ns: left off to allow vi visual mode. APL font (:as=\E^N:/:ae=\E^O:) not 17208# supported here. :uc: is slow, but looks nice. Suggest setenv MORE -up . 17209# :vb: needs enough delay to let you see the background color being toggled. 17210tek4113-nd|tektronix 4113 color graphics with no dialog area, 17211 OTbs, am, eo, 17212 cols#80, it#8, lines#34, 17213 clear=\E^L, cub1=^H, cud1=^J, cuf1=^I, cuu1=^K, 17214 cvvis=\ELZ\EKA0, 17215 flash=\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERBA4\ERB0, 17216 home=\ELF7l\177 @, ht=^I, is2=\ELZ\EKA0\ELF7l\177 @, 17217 ll=\ELF hl @, rmso=\EMT1, smso=\EMT2, uc=\010\EMG1_\EMG0, 17218# This entry is from Tek. Inc. (Brian Biehl) 17219# (tek4115: :bc: renamed to :le:, <rmam>/<smam> added based on init string -- esr) 17220otek4115|Tektronix 4115, 17221 OTbs, am, da, db, eo, 17222 cols#80, it#8, lines#34, 17223 cbt=\E[Z, clear=\E[H\E[2J, 17224 cnorm=\E%!0\ELBG8\E%!1\E[34;1H, cub1=\E[D, cud1=\E[B, 17225 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 17226 cvvis=\E%!0\ELBB2\E%!1, dch1=\E[P, dl1=\E[M, ed=\E[J, 17227 el=\E[K, home=\E[H, ht=^I, if=/usr/share/tabset/vt100, 17228 il1=\E[L, 17229 is2=\E%!0\E%\014\ELV0\EKA1\ELBB2\ENU@=\ELLB2\ELM0\ELV1\EKYA?\E%!1\E[<1l\E[?7h\E[?8h\E[34;1H\E[34B\E[m, 17230 kbs=^H, ri=\EM, rmam=\E[?7l, 17231 rmcup=\E%!0\ELBG8\E%!1\E[34;1H\E[J, rmir=\E[4l, 17232 rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smam=\E[?7h, 17233 smcup=\E%!0\ELBB2\E%!1, smir=\E[4h, smkx=\E=, smso=\E[7m, 17234 smul=\E[4m, 17235tek4115|newer tektronix 4115 entry with more ANSI capabilities, 17236 am, xon, 17237 cols#80, lines#34, 17238 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J, 17239 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 17240 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 17241 cuu=\E[%p1%dA, cuu1=\E[A, dch1=\E[P, dl=\E[%p1%dM, 17242 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, hpa=\E[%p1%{1}%+%dG, 17243 ht=^I, hts=\EH, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 17244 il1=\E[L, ind=^J, invis=\E[8m, kbs=^H, kcub1=\E[D, 17245 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, 17246 rep=%p1%c\E[%p2%{1}%-%db, rev=\E[7m, rmam=\E[?7l, 17247 rmso=\E[m, rmul=\E[m, 17248 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;%?%p7%t8;%;m, 17249 sgr0=\E[m, smam=\E[?7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 17250 vpa=\E[%p1%{1}%+%dd, 17251# The tek4125 emulates a vt100 incorrectly - the scrolling region 17252# command is ignored. The following entry replaces <csr> with the needed 17253# <il>, <il>, and <smir>; removes some cursor pad commands that the tek4125 17254# chokes on; and adds a lot of initialization for the tek dialog area. 17255# Note that this entry uses all 34 lines and sets the cursor color to green. 17256# Steve Jacobson 8/85 17257# (tek4125: there were two "\!"s in the is that I replaced with "\E!"; 17258# commented out, <smir>=\E1 because there's no <rmir> -- esr) 17259tek4125|tektronix 4125, 17260 lines#34, 17261 csr@, dl1=\E[1M, il1=\E[1L, 17262 is2=\E%\E!0\EQD1\EUX03\EKA\ELBB2\ELCE0\ELI100\ELJ2\ELLB2\ELM0\ELS1\ELX00\ELV1\E%\E!1\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, 17263 rc@, sc@, smkx=\E=, use=vt100, 17264 17265# From: <jcoker@ucbic> 17266# (tek4207: This was the termcap file's entry for the 4107/4207, but SCO 17267# supplied another, less capable 4107 entry. So we'll use that for 4107 and 17268# note that if jcoker wasn't confused you may be able to use this one. 17269# I merged in <msgr>,<ind>,<ri>,<invis>,<tbc> from a BRL entry -- esr) 17270tek4207|Tektronix 4207 graphics terminal with memory, 17271 am, bw, mir, msgr, ul, xenl, 17272 cols#80, it#8, lines#32, 17273 blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[H\E[J$<156/>, 17274 cub1=^H, cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 17275 cuu1=\EM, dch1=\E[P$<4/>, dl1=\E[M$<3/>, ed=\E[J, 17276 el=\E[K$<5/>, home=\E[H, ht=^I, ich1=\E[@$<4/>, 17277 il1=\E[L$<3/>, ind=\E[S, invis=\E[=6;<5, 17278 is2=\E%!0\ELBP0\E%!1\E[H\E[2g\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[8C\EH\E[J, 17279 kcub1=\E[D, kcud1=\ED, kcuf1=\E[C, kcuu1=\EM, khome=\E[H, 17280 rev=\E[7m, ri=\E[T, 17281 rmcup=\E[?6h\E%!0\ELBP0\E%!1\E[32;1f, rmso=\E[m, 17282 rmul=\E[m, sgr0=\E[m, smcup=\E[?6l\E[H\E[J, smso=\E[7m, 17283 smul=\E[4m, tbc=\E[1g, 17284 17285# From: <carolyn@dali.berkeley.edu> Thu Oct 31 12:54:27 1985 17286# (tek4404: There was a "\!" in <smcup> that I replaced with "\E!". 17287# Tab had been given as \E2I,that must be the tab-set capability -- esr) 17288tek4404|tektronix 4404, 17289 OTbs, 17290 cols#80, it#8, lines#32, 17291 blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, 17292 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 17293 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[1M, 17294 ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\E[2I, il1=\E[1L, 17295 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, rc=\E8, 17296 rmcup=\E[1;1H\E[0J\E[?6h\E[?1l, rmir=\E[4l, 17297 rmkx=\E[?1h, rmso=\E[27m, rmul=\E[m, sc=\E7, sgr0=\E[m, 17298 smcup=\E%\E!1\E[1;32r\E[?6l\E>, smir=\E[4h, 17299 smkx=\E[?1l, smso=\E[7m, smul=\E[4m, 17300# Some unknown person wrote: 17301# I added the is string - straight Unix has ESC ; in the login 17302# string which sets a ct8500 into monitor mode (aka 4025 snoopy 17303# mode). The is string here cleans up a few things (but not 17304# everything). 17305ct8500|tektronix ct8500, 17306 am, bw, da, db, 17307 cols#80, lines#25, 17308 bel=^G, cbt=\E^I, clear=\E^E, cr=^M, cub1=^H, cud1=^J, 17309 cuf1=\ES, cup=\E|%p1%{32}%+%c%p2%{32}%+%c, cuu1=\ER, 17310 dch1=\E^], dl1=\E^M, ed=\E^U, el=\E^T, ht=^I, ich1=\E^\, 17311 il1=\E^L, ind=^J, is2=\037\EZ\Ek, ri=\E^A, rmso=\E\s, 17312 rmul=\E\s, sgr0=\E\s, smso=\E$, smul=\E!, 17313 17314# Tektronix 4205 terminal. 17315# 17316# am is not defined because the wrap around occurs not when the char. 17317# is placed in the 80'th column, but when we are attempting to type 17318# the 81'st character on the line. (esr: hmm, this is like the vt100 17319# version of xenl, perhaps am + xenl would work!) 17320# 17321# Bold, dim, and standout are simulated by colors and thus not allowed 17322# with colors. The tektronix color table is mapped into the RGB color 17323# table by setf/setb. All colors are reset to factory specifications by oc. 17324# The <initc> cap uses RGB notation to define colors. for arguments 1-3 the 17325# interval (0-1000) is broken into 8 smaller sub-intervals (125). Each sub- 17326# interval then maps into pre-defined value. 17327tek4205|tektronix 4205, 17328 ccc, mir, msgr, 17329 colors#8, cols#80, it#8, lines#30, ncv#49, pairs#63, 17330 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 17331 bel=^G, blink=\E[5m, bold=\E[=7;<4m, cbt=\E[Z, 17332 clear=\E[2J\E[H, cr=^M, cub=\E[%p1%dD, cub1=\E[D, 17333 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 17334 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 17335 dch1=\E[1P, dim=\E[=1;<6m, dl=\E[%p1%dM, dl1=\E[1M, 17336 ech=\E%p1%dX, ed=\E[J, el=\E[K, el1=\E[1K, enacs=\E)0, 17337 home=\E[H, ht=^I, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[1L, 17338 ind=\ED, 17339 initc=\E%%!0\ETF4%?%p1%{0}%=%t0%e%p1%{1}%=%t4%e%p1%{2}%=%t3%e%p1%{3}%=%t5%e%p1%{4}%=%t2%e%p1%{5}%=%t6%e%p1%{6}%=%t7%e1%;%?%p2%{125}%<%t0%e%p2%{250}%<%tA2%e%p2%{375}%<%tA?%e%p2%{500}%<%tC8%e%p2%{625}%<%tD4%e%p2%{750}%<%tE1%e%p2%{875}%<%tE\:%eF4%;%?%p3%{125}%<%t0%e%p3%{250}%<%tA2%e%p3%{375}%<%tA?%e%p3%{500}%<%tC8%e%p3%{625}%<%tD4%e%p3%{750}%<%tE1%e%p3%{875}%<%tE\:%eF4%;%?%p4%{125}%<%t0%e%p4%{250}%<%tA2%e%p4%{375}%<%tA?%e%p4%{500}%<%tC8%e%p4%{625}%<%tD4%e%p4%{750}%<%tE1%e%p4%{875}%<%tE\:%eF4%;\E%%!1, 17340 invis=\E[=6;<5, is1=\E%!0\ETM1\E%!1\E[m, kbs=^H, 17341 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\EOA, 17342 kf1=\EOB, kf2=\EOC, kf3=\EOD, kf4=\EP, kf5=\EQ, kf6=\ER, 17343 kf7=\ES, 17344 oc=\E%!0\ETFB000001F4F4F42F40030F404A4C<F450F4F46F40F47F4F40\E%!1, 17345 op=\E[39;40m, rev=\E[7m, ri=\EM, rmacs=^O, rmcup=, 17346 rmir=\E[4l, rmso=\E[=0;<1m, rmul=\E[24m, 17347 setb=\E[=%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;, 17348 setf=\E[<%?%p1%{0}%=%t0m%e%p1%{1}%=%t4m%e%p1%{2}%=%t3m%e%p1%{3}%=%t5m%e%p1%{4}%=%t2m%e%p1%{5}%=%t6m%e%p1%{6}%=%t7m%e1m%;, 17349 sgr0=\E[=0;<1m\E[24;25;27m\017, smacs=^N, 17350 smcup=\E%%!1\E[?6l\E[2J, smir=\E[4h, smso=\E[=2;<3m, 17351 smul=\E[4m, tbc=\E[1g, 17352 17353#### Teletype (tty) 17354# 17355# These are the hardcopy Teletypes from before AT&T bought the company, 17356# clattering electromechanical dinosaurs in Bakelite cases that printed on 17357# pulpy yellow roll paper. If you remember these you go back a ways. 17358# Teletype-branded VDTs are listed in the AT&T section. 17359# 17360# The earliest UNIXes were designed to use these clunkers; nroff and a few 17361# other programs still default to emitting codes for the Model 37. 17362# 17363 17364tty33|tty35|model 33 or 35 teletype, 17365 hc, os, xon, 17366 cols#72, 17367 bel=^G, cr=^M, cud1=^J, ind=^J, 17368tty37|model 37 teletype, 17369 OTbs, hc, os, xon, 17370 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8, 17371 ind=^J, 17372 17373# There are known to be at least three flavors of the tty40, all seem more 17374# like IBM half duplex forms fillers than ASCII terminals. They have lots of 17375# awful braindamage, such as printing a visible newline indicator after each 17376# newline. The 40-1 is a half duplex terminal and is hopeless. The 40-2 is 17377# braindamaged but has hope and is described here. The 40-4 is a 3270 17378# lookalike and beyond hope. The terminal has visible bell but I don't know 17379# it - it's null here to prevent it from showing the BL character. 17380# There is an \EG in <nl> because of a bug in old vi (if stty says you have 17381# a "newline" style terminal (-crmode) vi figures all it needs is nl 17382# to get crlf, even if <cr> is not ^M.) 17383# (tty40: removed obsolete ":nl=\EG\EB:", it's just do+cr -- esr) 17384tty40|ds40|ds40-2|dataspeed40|teletype dataspeed 40/2, 17385 OTbs, xon, 17386 cols#80, lines#24, 17387 clear=\EH$<20>\EJ$<80>, cr=\EG, cub1=^H, cud1=\EB, 17388 cuf1=\EC, cuu1=\E7, dch1=\EP$<50>, dl1=\EM$<50>, 17389 ed=\EJ$<75>, home=\EH$<10>, ht=\E@$<10>, hts=\E1, 17390 ich1=\E\^$<50>, il1=\EL$<50>, ind=\ES$<20>, kbs=^], 17391 kcub1=^H, mc4=^T, mc5=\022$<2000>, ri=\ET$<10>, rmso=\E4, 17392 rs2=\023\ER$<60>, smso=\E3, tbc=\EH\E2$<80>, 17393tty43|model 43 teletype, 17394 OTbs, am, hc, os, xon, 17395 cols#132, 17396 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, 17397 17398#### Tymshare 17399# 17400 17401# You can add <is2=\E<> to put this 40-column mode, though I can't 17402# for the life of me think why anyone would want to. 17403scanset|sc410|sc415|Tymshare Scan Set, 17404 am, bw, msgr, 17405 cols#80, lines#24, 17406 acsc=j%k4l<m-q\,x5, bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, 17407 cud1=^J, cuf1=^I, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 17408 cuu1=^K, ed=\EJ, el=\EK, home=\EH, ind=^J, kcub1=\ED, 17409 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, mc0=\E;3, mc4=\E;0, 17410 mc5=\E;0, rc=^C, rmacs=^O, rs1=\E>, sc=^B, smacs=^N, 17411 17412#### Volker-Craig (vc) 17413# 17414# If you saw a Byte Magazine cover with a terminal on it during the early 17415# 1980s, it was probably one of these. Carl Helmers liked them because 17416# they could crank 19.2 and were cheap (that is, he liked them until he tried 17417# to program one...) 17418# 17419 17420# Missing in vc303a and vc303 descriptions: they scroll 2 lines at a time 17421# every other linefeed. 17422vc303|vc103|vc203|volker-craig 303, 17423 OTbs, OTns, am, 17424 cols#80, lines#24, 17425 bel=^G, clear=\014$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, 17426 cuu1=^N, home=\013$<40>, kcub1=^H, kcud1=^J, kcuf1=^I, 17427 kcuu1=^N, ll=\017$<1>W, 17428vc303a|vc403a|volker-craig 303a, 17429 clear=\030$<40>, cuf1=^U, cuu1=^Z, el=\026$<20>, 17430 home=\031$<40>, kcuf1=^U, kcuu1=^Z, ll=^P, use=vc303, 17431# (vc404: removed obsolete ":ma=^Z^P^U :" -- esr) 17432vc404|volker-craig 404, 17433 OTbs, am, 17434 cols#80, lines#24, 17435 bel=^G, clear=\030$<40>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 17436 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 17437 ed=\027$<40>, el=\026$<20>, home=\031$<40>, ind=^J, 17438 kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^Z, 17439vc404-s|volker-craig 404 w/standout mode, 17440 cud1=^J, rmso=^O, smso=^N, use=vc404, 17441# From: <wolfgang@cs.sfu.ca> 17442# (vc414: merged in cup/dl1/home from an old vc414h-noxon) 17443vc414|vc414h|Volker-Craig 414H in sane escape mode., 17444 OTbs, am, 17445 cols#80, lines#24, 17446 clear=\E\034$<40>, cud1=\E^K, cuf1=^P, 17447 cup=\E\021%p2%c%p1%c$<40>, cuu1=\E^L, dch1=\E3, 17448 dl1=\E\023$<40>, ed=\E^X, el=\E\017$<10/>, home=\E^R, 17449 ich1=\E\:, il1=\E\032$<40>, kcub1=^H, kcud1=\E^K, kcuf1=^P, 17450 kcuu1=\E^L, kf0=\EA, kf1=\EB, kf2=\EC, kf3=\ED, kf4=\EE, 17451 kf5=\EF, kf6=\EG, kf7=\EH, khome=\E^R, lf0=PF1, lf1=PF2, 17452 lf2=PF3, lf3=PF4, lf4=PF5, lf5=PF6, lf6=PF7, lf7=PF8, 17453 rmso=\E^_, smso=\E^Y, 17454vc415|volker-craig 415, 17455 clear=^L, use=vc404, 17456 17457######## OBSOLETE PERSONAL-MICRO CONSOLES AND EMULATIONS 17458# 17459 17460#### IBM PC and clones 17461# 17462 17463# The pcplot IBM-PC terminal emulation program is really messed up. It is 17464# supposed to emulate a vt-100, but emulates the wraparound bug incorrectly, 17465# doesn't support scrolling regions, ignores add line commands, and ignores 17466# delete line commands. Consequently, the resulting behavior looks like a 17467# crude adm3a-type terminal. 17468# Steve Jacobson 8/85 17469pcplot|pc-plot terminal emulation program, 17470 xenl@, 17471 csr@, dl@, dl1@, il@, il1@, rc@, sc@, use=vt100, 17472# KayPro II from Richard G Turner <rturner at Darcom-Hq.ARPA> 17473# I've found that my KayPro II, running MDM730, continues to emulate an 17474# ADM-3A terminal, just like I was running TERM.COM. On our 4.2 UNIX 17475# system the following termcap entry works well: 17476# I have noticed a couple of minor glitches, but nothing I can't work 17477# around. (I added two capabilities from the BRL entry -- esr) 17478kaypro|kaypro2|kaypro II, 17479 OTbs, am, 17480 cols#80, lines#24, 17481 bel=^G, clear=\032$<1/>, cr=^M, cud1=^J, cuf1=^L, 17482 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dl1=\ER, ed=^W, 17483 el=^X, home=^^, il1=\EE, ind=^J, kcud1=^J, kcuf1=^L, kcuu1=^K, 17484 17485# From IBM, Thu May 5 19:35:27 1983 17486# (ibmpc: commented out <smir>=\200R because we don't know <rmir> -- esr) 17487ibm-pc|ibm5051|5051|IBM Personal Computer (no ANSI.SYS), 17488 OTbs, am, 17489 cols#80, lines#24, 17490 bel=^G, clear=^L^K, cr=^M^^, cub1=^], cud1=^J, cuf1=^\, 17491 cuu1=^^, home=^K, ind=\n$<10>, kcud1=^_, 17492 17493ibmpc|wy60-PC|wyse60-PC|IBM PC/XT running PC/IX, 17494 OTbs, am, bw, eo, hs, km, msgr, ul, 17495 cols#80, it#8, lines#24, 17496 acsc=j\331k\277l\332m\300n\305q\304t\303u\264v\301w\302x\263, 17497 bel=^G, blink=\E[5m, bold=\E[1m, clear=\Ec, cr=^M, 17498 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 17499 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 17500 cuu=\E[%p1%dA, cuu1=\E[A, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 17501 home=\E[H, hpa=\E[%i%p1%dG, ind=\E[S\E[B, 17502 indn=\E[%p1%dS\E[%p1%dB, invis=\E[30;40m, kbs=^H, 17503 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 17504 kdch1=\177, kend=\E[Y, kf1=\240, kf10=\251, kf2=\241, 17505 kf3=\242, kf4=\243, kf5=\244, kf6=\245, kf7=\246, kf8=\247, 17506 kf9=\250, khome=\E[H, kich1=\E[^H, knp=\E[U, kpp=\E[V, 17507 ll=\E[24;1H, nel=^M, rev=\E[7m, ri=\E[T\E[A, 17508 rin=\E[%p1%dT\E[%p1%dA, rmso=\E[m, rmul=\E[m, 17509 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;%?%p7%t30;40%;m, 17510 sgr0=\E[m, smso=\E[7m, smul=\E[4m, 17511 17512#### Apple II 17513# 17514# Apple II firmware console first, then various 80-column cards and 17515# terminal emulators. For two cents I'd toss all these in the UFO file 17516# along with the 40-column apple entries. 17517# 17518 17519# From: brsmith@umn-cs.cs.umn.edu (Brian R. Smith) via BRL 17520# 'it#8' tells UNIX that you have tabs every 8 columns. This is a 17521# function of TIC, not the firmware. 17522# The clear key on a IIgs will do something like clear-screen, 17523# depending on what you're in. 17524appleIIgs|appleIIe|appleIIc|Apple 80 column firmware interface, 17525 OTbs, am, bw, eo, msgr, 17526 cols#80, it#8, lines#24, 17527 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^\, 17528 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 17529 home=^Y, ht=^I, ind=^W, kbs=^H, kclr=^X, kcub1=^H, kcud1=^J, 17530 kcuf1=^U, kcuu1=^K, kdch1=\177, nel=^M^W, ri=^V, rmso=^N, 17531 smso=^O, 17532# Apple //e with 80-column card, entry from BRL 17533# The modem interface is permitted to discard LF (maybe DC1), otherwise 17534# passing characters to the 80-column firmware via COUT (PR#3 assumed). 17535# Auto-wrap does not work right due to newline scrolling delay, which also 17536# requires that you set "stty cr2". 17537# Note: Cursor addressing is only available via the Pascal V1.1 entry, 17538# not via the BASIC PR#3 hook. All this nonsense can be avoided only by 17539# using a terminal emulation program instead of the built-in firmware. 17540apple2e|Apple //e, 17541 bw, msgr, 17542 cols#80, lines#24, 17543 bel=^G, clear=\014$<100/>, cub1=^H, cud1=^J, cuu1=^_, 17544 ed=\013$<4*/>, el=\035$<4/>, home=^Y, ht=^I, ind=^W, 17545 is2=^R^N, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^U, kcuu1=^K, 17546 nel=\r$<100/>, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, 17547 smso=^O, 17548# mcvax!vu44!vu45!wilcke uses the "ap" entry together with Ascii Express Pro 17549# 4.20, with incoming and outgoing terminals both on 0, emulation On. 17550apple2e-p|Apple //e via Pascal, 17551 cup=\036%p2%{32}%+%c%p1%{32}%+%c, kbs=^H, kcub1=^H, 17552 kcud1=^J, use=apple2e, 17553# (ASCII Express) MouseTalk "Standard Apple //" emulation from BRL 17554# Enable DC3/DC1 flow control with "stty ixon -ixany". 17555apple-ae|ASCII Express, 17556 OTbs, am, bw, msgr, nxon, xon, 17557 cols#80, it#8, lines#24, 17558 bel=\007$<500/>, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 17559 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 17560 home=^Y, ind=^W, is2=^R^N, kclr=^X, kcub1=^H, kcud1=^J, 17561 kcuf1=^U, kcuu1=^K, rev=^O, ri=^V, rmso=^N, rs1=^R^N, sgr0=^N, 17562 smso=^O, 17563appleII|apple ii plus, 17564 OTbs, am, 17565 cols#80, it#8, lines#24, 17566 clear=^L, cnorm=^TC2, cub1=^H, cud1=^J, cuf1=^\, 17567 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, cvvis=^TC6, 17568 ed=^K, el=^], flash=\024G1$<200/>\024T1, home=\E^Y, ht=^I, 17569 is2=\024T1\016, kcud1=^J, kcuf1=^U, rmso=^N, sgr0=^N, 17570 smso=^O, 17571# Originally by Gary Ford 21NOV83 17572# From: <ee178aci%sdcc7@SDCSVAX.ARPA> Fri Oct 11 21:27:00 1985 17573apple-80|apple II with smarterm 80 col, 17574 OTbs, am, bw, 17575 cols#80, lines#24, 17576 cbt=^R, clear=\014$<10*/>, cr=\r$<10*/>, cub1=^H, cud1=^J, 17577 cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, 17578 ed=\013$<10*/>, el=\035$<10/>, home=^Y, 17579apple-soroc|apple emulating soroc 120, 17580 am, 17581 cols#80, lines#24, 17582 bel=^G, clear=\E*$<300>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 17583 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EY, el=\ET, 17584 home=^^, ind=^J, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 17585# From Peter Harrison, Computer Graphics Lab, San Francisco 17586# ucbvax!ucsfmis!harrison .....uucp 17587# ucbvax!ucsfmis!harrison@BERKELEY .......ARPA 17588# "These two work. If you don't have the inverse video chip for the 17589# Apple with videx then remove the :so: and :se: fields." 17590# (apple-videx: this used to be called DaleApple -- esr) 17591apple-videx|Apple with videx videoterm 80 column board with inverse video, 17592 OTbs, am, xenl, 17593 cols#80, it#8, lines#24, 17594 clear=\014$<300/>, cub1=^H, cud1=^J, cuf1=^\, 17595 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 17596 home=^Y, ht=^I, kcub1=^H, kcud1=^J, kcuf1=^U, khome=^Y, 17597 rmso=^Z2, sgr0=^Z2, smso=^Z3, 17598# My system [for reference] : Apple ][+, 64K, Ultraterm display card, 17599# Apple Cat ][ 212 modem, + more all 17600# controlled by ASCII Express: Pro. 17601# From Dave Shaver <isucs1!shaver> 17602apple-uterm-vb|Videx Ultraterm for Apple micros with Visible Bell, 17603 OTbs, am, eo, xt, 17604 cols#80, lines#24, 17605 acsc=, clear=^L, cuf1=^\, 17606 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 17607 flash=^W35^W06, home=^Y, 17608 is2=^V4^W06\017\rVisible Bell Installed.\016\r\n, 17609 rmso=^N, smso=^O, 17610apple-uterm|Ultraterm for Apple micros, 17611 OTbs, am, eo, xt, 17612 cols#80, lines#24, 17613 acsc=, clear=^L, cuf1=^\, 17614 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 17615 home=^Y, is2=^V4^W06\016, rmso=^N, smso=^O, 17616# from trwrba!bwong (Bradley W. Wong): 17617# 17618# This entry assumes that you are using an apple with the UCSD Pascal 17619# language card. SYSTEM.MISCINFO is assumed to be the same as that 17620# supplied with the standard apple except that screenwidth should be set 17621# using SETUP to 80 columns. Note that the right arrow is not mapped in 17622# this termcap entry. This is because that key, on the Apple, transmits 17623# a ^U and would thus preempt the more useful "up" function of vi. 17624# 17625# HMH 2/23/81 17626apple80p|80-column apple with Pascal card, 17627 am, bw, 17628 cols#80, lines#24, 17629 clear=^Y^L, cuf1=^\\:, 17630 cup=\036%p2%{32}%+%c%p1%{32}%+%c, cuu1=^_, ed=^K, el=^], 17631 home=^Y, kcub1=^H, 17632# 17633# Apple II+ equipped with Videx 80 column card 17634# 17635# Terminfo from ihnp4!ihu1g!djc1 (Dave Christensen) via BRL; 17636# manually converted by D A Gwyn 17637# 17638# DO NOT use any terminal emulation with this data base, it works directly 17639# with the Videx card. This has been tested with vi 1200 baud and works fine. 17640# 17641# This works great for vi, except I've noticed in pre-R2, ^U will scroll back 17642# 1 screen, while in R2 ^U doesn't. 17643# For inverse alternate character set add: 17644# <smacs>=^O:<rmacs>=^N: 17645# (apple-v: added it#8 -- esr) 17646apple-videx2|Apple II+ w/ Videx card (similar to Datamedia h1520), 17647 am, xenl, 17648 cols#80, it#8, lines#24, 17649 bel=\007$<100/>, clear=\014$<16*/>, cr=^M, cub1=^H, 17650 cud1=^J, cuf1=^\, cup=\036%p2%{32}%+%c%p1%{32}%+%c, 17651 cuu1=^_, ed=\013$<16*/>, el=^], home=^Y, ht=\011$<8/>, 17652 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^\, kcuu1=^_, 17653 khome=^Y, rmso=^Z2, smso=^Z3, 17654apple-videx3|vapple|Apple II with 80 col card, 17655 OTbs, am, 17656 cols#80, lines#24, 17657 clear=\Ev, cub1=\ED, cud1=\EB, cuf1=\EC, 17658 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, el=\Ex, 17659 home=\EH, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 17660 kf0=\EP, kf1=\EQ, kf2=\ER, kf3=\E\s, kf4=\E!, kf5=\E", kf6=\E#, 17661 kf7=\E$, kf8=\E%%, kf9=\E&, khome=\EH, 17662#From: decvax!cbosgd!cbdkc1!mww Mike Warren via BRL 17663aepro|Apple II+ running ASCII Express Pro--vt52, 17664 OTbs, 17665 cols#80, lines#24, 17666 clear=\014$<300/>, cub1=\ED, cud1=\EB, cuf1=\EC, 17667 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 17668 el=\EK, home=\EH, 17669# UCSD addition: Yet another termcap from Brian Kantor's Micro Munger Factory 17670apple-vm80|ap-vm80|apple with viewmax-80, 17671 OTbs, 17672 cols#80, lines#24, 17673 clear=\014$<300/>, cuf1=^\\:, 17674 cup=\036%p1%{32}%+%c%p2%{32}%+%c$<100/>, cuu1=^_, 17675 ed=\013$<300/>, el=^], home=\031$<200/>, 17676 17677#### Apple Lisa & Macintosh 17678# 17679 17680# (lisa: changed <cvvis> to <cnorm> -- esr) 17681lisa|apple lisa console display (black on white), 17682 OTbs, am, eo, msgr, 17683 cols#88, it#8, lines#32, 17684 acsc=jdkclfmenbqattuvvuwsx`, civis=\E[5h, clear=^L, 17685 cnorm=\E[5l, cub1=^H, cud1=\E[B, cuf1=\E[C, 17686 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 17687 ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, il1=\E[L, 17688 is2=\E>\E[m\014, kbs=^H, kcub1=\E[D, kcud1=\E[B, 17689 kcuf1=\E[C, kcuu1=\E[A, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, 17690 sgr0=\E[m, smacs=\E[11m, smso=\E[7m, smul=\E[4m, 17691liswb|apple lisa console display (white on black), 17692 is2=\E>\E[0;7m\014, rmso=\E[0;7m, rmul=\E[0;7m, 17693 smso=\E[m, smul=\E[4m, use=lisa, 17694 17695# lisaterm from ulysses!gamma!epsilon!mb2c!jed (John E. Duncan III) via BRL; 17696# <is2> revised by Ferd Brundick <fsbrn@BRL.ARPA> 17697# 17698# These entries assume that the 'Auto Wraparound' is enabled. 17699# Xon-Xoff flow control should also be enabled. 17700# 17701# The vt100 uses :rs2: and :rf: rather than :is2:/:tbc:/:hts: because the tab 17702# settings are in non-volatile memory and don't need to be reset upon login. 17703# Also setting the number of columns glitches the screen annoyingly. 17704# You can type "reset" to get them set. 17705# 17706lisaterm|Apple Lisa or Lisa/2 running LisaTerm vt100 emulation, 17707 OTbs, OTpt, am, xenl, xon, 17708 OTkn#4, cols#80, it#8, lines#24, vt#3, 17709 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[2J, cr=^M, 17710 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 17711 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 17712 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, 17713 el=\E[K, home=\E[H, ht=^I, hts=\EH, ind=^J, kbs=^H, kcub1=\EOD, 17714 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, kf1=\EOQ, 17715 kf2=\EOR, kf3=\EOS, lf0=F1, lf1=F2, lf2=F3, lf3=F4, rc=\E8, 17716 rev=\E[7m, ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 17717 rs1=\E>\E[?1l\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h\E[1;24r, 17718 sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, smso=\E[7m, smul=\E[4m, 17719 tbc=\E[3g, 17720# Lisaterm in 132 column ("wide") mode. 17721lisaterm-w|Apple Lisa with Lisaterm in 132 column mode, 17722 cols#132, 17723 kbs=^H, kcub1=^H, kcud1=^J, use=lisaterm, 17724# Although MacTerminal has insert/delete line, it is commented out here 17725# since it is much faster and cleaner to use the "lock scrolling region" 17726# method of inserting and deleting lines due to the MacTerminal implementation. 17727# Also, the "Insert/delete ch" strings have an extra character appended to them 17728# due to a bug in MacTerminal V1.1. Blink is disabled since it is not 17729# supported by MacTerminal. 17730mac|macintosh|Macintosh with MacTerminal, 17731 xenl, 17732 OTdN#30, 17733 blink@, dch1=\E[P$<7/>, ich1=\E[@$<9/>, ip=$<7/>, use=lisa, 17734# Lisaterm in 132 column ("wide") mode. 17735mac-w|macterminal-w|Apple Macintosh with Macterminal in 132 column mode, 17736 cols#132, use=mac, 17737 17738#### Radio Shack/Tandy 17739# 17740 17741# (coco3: This had "ta" used incorrectly as a boolean and bl given as "bl#7". 17742# I read these as mistakes for ":it#8:" and ":bl=\007:" respectively -- esr) 17743# From: <{pbrown,ctl}@ocf.berkeley.edu> 12 Mar 90 17744coco3|os9LII|Tandy CoCo3 24*80 OS9 Level II, 17745 OTbs, am, 17746 cols#80, it#8, lines#24, 17747 bel=^G, blink=^_", bold=\E\:^A, civis=^E\s, 17748 clear=\014$<5*/>, cnorm=^E!, cub1=^H, cud1=^J, cuf1=^F, 17749 cup=\002%p2%{32}%+%c%p1%{32}%+%c$<2/>, cuu1=^I, 17750 dl1=^_1, ed=^K, el=^D, home=^A, il1=^_0, kcub1=^H, kcud1=^J, 17751 kcuf1=^I, kcuu1=^L, rev=^_\s, rmso=^_!, rmul=^_#, 17752 sgr0=\037!\E\:\0, smso=^_\s, smul=^_", 17753# (trs2: removed obsolete ":nl=^_:" -- esr) 17754trs2|trsII|trs80II|Radio Shack Model II using P&T CP/M, 17755 OTbs, am, msgr, 17756 cols#80, it#8, lines#24, 17757 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^_, cuf1=^], 17758 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^^, dl1=^K, ed=^B, 17759 el=^A, home=^F, ht=^I, il1=^D, ind=^J, kbs=^H, kcub1=^\, 17760 kcud1=^_, kcuf1=^], kcuu1=^^, rmso=^O, sgr0=^O, smso=^N, 17761# From: Kevin Braunsdorf <ksb@mentor.cc.purdue.edu> 17762# (This had extension capabilities 17763# :BN=\E[?33h:BF=\E[?33l:UC=\E[_ q:BC=\E[\177 q:\ 17764# :CN=\ERC:CF=\ERc:NR=\ERD:NM=\ER@: 17765# I also deleted the unnecessary ":kn#2:", ":sg#0:" -- esr) 17766trs16|trs-80 model 16 console, 17767 OTbs, am, 17768 cols#80, it#8, lines#24, 17769 acsc=jak`l_mbquvewcxs, bel=^G, civis=\ERc, clear=^L, 17770 cnorm=\ERC, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 17771 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 17772 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, 17773 ind=^J, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 17774 kf0=^A, kf1=^B, kf2=^D, kf3=^L, kf4=^U, kf5=^P, kf6=^N, kf7=^S, 17775 khome=^W, lf0=f1, lf1=f2, lf2=f3, lf3=f4, lf4=f5, lf5=f6, lf6=f7, 17776 lf7=f8, mc4=\E]+, mc5=\E]=, rmacs=\ERg, rmso=\ER@, sgr0=\ER@, 17777 smacs=\ERG, smso=\ERD, 17778 17779#### Commodore Business Machines 17780# 17781# Formerly located in West Chester, PA; went spectacularly bust in 1994 17782# after years of shaky engineering and egregious mismanagement. Made one 17783# really nice machine (the Amiga) and boatloads of nasty ones (PET, C-64, 17784# C-128, VIC-20). The C-64 is said to have been the most popular machine 17785# ever (most units sold); they can still be found gathering dust in closets 17786# everywhere. 17787# 17788 17789# From: Kent Polk <kent@swrinde.nde.swri.edu>, 30 May 90 17790# Added a few more entries, converted caret-type control sequence (^x) entries 17791# to '\0xx' entries since a couple of people mentioned losing '^x' sequences. 17792# Corrections by Ty Sarna <tsarna@endicor.com>, Sat Feb 28 18:55:15 1998 17793# 17794# :as:, :ae: Support for alternate character sets. 17795# :ve=\E[\040p:vi=\E[\060\040p: cursor visible/invisible. 17796# :xn: vt100 kludginess at column 80/NEWLINE ignore after 80 cols(Concept) 17797# This one appears to fix a problem I always had with a line ending 17798# at 'width+1' (I think) followed by a blank line in vi. The blank 17799# line tended to disappear and reappear depending on how the screen 17800# was refreshed. Note that this is probably needed only if you use 17801# something like a Dnet Fterm with the window sized to some peculiar 17802# dimension larger than 80 columns. 17803# :k0=\E9~: map F10 to k0 - could have F0-9 -> k0-9, but ... F10 was 'k;' 17804# (amiga: removed obsolete :kn#10:, 17805# also added empty <acsc> to suppress a warning --esr) 17806amiga|Amiga ANSI, 17807 OTbs, am, bw, xenl, 17808 cols#80, lines#24, 17809 acsc=, bel=^G, blink=\E[7;2m, bold=\E[1m, cbt=\E[Z, 17810 civis=\E[0 p, clear=\E[H\E[J, cnorm=\E[ p, cub=\E[%p1%dD, 17811 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 17812 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 17813 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 17814 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, 17815 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=\E[S, 17816 indn=\E[%p1%dS, invis=\E[8m, is2=\E[20l, kbs=^H, 17817 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf0=\E[9~, 17818 kf1=\E[0~, kf2=\E[1~, kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, 17819 kf6=\E[5~, kf7=\E[6~, kf8=\E[7~, kf9=\E[8~, rev=\E[7m, 17820 ri=\E[T, rin=\E[%p1%dT, rmacs=^O, rmso=\E[m, rmul=\E[m, 17821 rs1=\Ec, sgr0=\E[m, smacs=^N, smso=\E[7m, smul=\E[4m, 17822 17823# From: Hans Verkuil <hans@wyst.hobby.nl>, 4 Dec 1995 17824# (amiga: added empty <acsc> to suppress a warning. 17825# I'm told this entry screws up badly with AS225, the Amiga 17826# TCP/IP package once from Commodore, and now sold by InterWorks.--esr) 17827amiga-h|Hans Verkuil's Amiga ANSI, 17828 OTbs, bw, msgr, 17829 cols#80, lines#24, 17830 acsc=, bel=^G, blink=\2337;2m, bold=\2331m, cbt=\233Z, 17831 civis=\2330 p, clear=\233H\233J, cnorm=\233 p, cr=^M, 17832 cub=\233%p1%dD, cub1=\233D, cud=\233%p1%dB, cud1=\233B, 17833 cuf=\233%p1%dC, cuf1=\233C, cup=\233%i%p1%d;%p2%dH, 17834 cuu=\233%p1%dA, cuu1=\233A, dch=\233%p1%dP, dch1=\233P, 17835 dim=\2332m, ech=\233%p1%dP, ed=\233J, el=\233K, flash=^G, 17836 home=\233H, ht=^I, ich=\233%p1%d@, ich1=\233@, ind=\233S, 17837 indn=\233%p1%dS, invis=\2338m, is2=\23320l, kbs=^H, 17838 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 17839 kdch1=\177, kf0=\2339~, kf1=\2330~, kf2=\2331~, kf3=\2332~, 17840 kf4=\2333~, kf5=\2334~, kf6=\2335~, kf7=\2336~, kf8=\2337~, 17841 kf9=\2338~, nel=\233B\r, rev=\2337m, ri=\233T, 17842 rin=\233%p1%dT, rmacs=^O, rmcup=\233?7h, rmso=\2330m, 17843 rmul=\2330m, rs1=\Ec, sgr0=\2330m, smacs=^N, smcup=\233?7l, 17844 smso=\2337m, smul=\2334m, 17845 17846# From: Henning 'Faroul' Peters <Faroul@beyond.kn-bremen.de>, 25 Sep 1999 17847# 17848# Pavel Fedin added 17849# Home Shift+Left 17850# End Shift+Right 17851# PgUp Shift+Up 17852# PgDn Shift+Down 17853amiga-8bit|Amiga ANSI using 8-bit controls, 17854 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L, 17855 ind=\204, indn@, kend=\233 @, khome=\233 A, knp=\233S, 17856 kpp=\233T, ri=\215, rin@, use=amiga-h, 17857 17858# From: Ruediger Kuhlmann <terminfo@ruediger-kuhlmann.de>, 18 Jul 2000 17859# requires use of appropriate preferences settings. 17860amiga-vnc|Amiga using VNC console (black on light gray), 17861 am, da, db, msgr, ndscr, 17862 btns#1, colors#16, cols#80, lines#24, lm#0, ncv#0, pairs#256, 17863 bel=^G, blink=\E[7;2m, bold=\E[1m, civis=\E[0p, 17864 clear=\E[H\E[J, cnorm=\E[p\E[>?6l, cr=^M, 17865 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 17866 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 17867 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 17868 cvvis=\E[>?6h, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 17869 dl=\E[%p1%dM, dl1=\E[1M, ed=\E[J, el=\E[K, flash=^G, 17870 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[1L, ind=\ED, 17871 indn=\E[%p1%dS, invis=\E8m, 17872 is2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h, 17873 kbs=^H, kcbt=\233Z, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 17874 kcuu1=\E[A, kdch1=\177, kf0=\E[9~, kf1=\E[0~, kf2=\E[1~, 17875 kf3=\E[2~, kf4=\E[3~, kf5=\E[4~, kf6=\E[5~, kf7=\E[6~, 17876 kf8=\E[7~, kf9=\E[8~, khlp=\E[?~, khome=\E[44~, kll=\E[45~, 17877 kmous=\E[M, knp=\E[42~, kpp=\E[41~, nel=\EE, oc=\E[0m, 17878 rev=\E[7m, ri=\EM, rin=\E[%p1%dT, rmcup=\E[?7h\E[r\E[J, 17879 rmkx=\E[?1l, rmso=\E[21m, rmul=\E[24m, rs1=\Ec, 17880 rs2=\E[>?2;18l\E[>?26;?6;20;>?15;?7;>?22;>?8h, 17881 setab=\E[%?%p1%{8}%>%t%'F'%p1%+%d%e4%p1%d%;m, 17882 setaf=\E[%?%p1%{8}%>%t%'2'%p1%+%d%e3%p1%d%;m, 17883 sgr0=\E[0m\017\E[30;85;>15m, smcup=\E[?7h, smkx=\E[?1h, 17884 smso=\E[1m, smul=\E[4m, 17885 17886# MorphOS on Genesi Pegasos 17887# By Pavel Fedin <sonic_amiga@rambler.ru> 17888morphos, 17889 acsc=, dl=\233%p1%dM, dl1=\233M, il=\233%p1%dL, il1=\233L, 17890 ind=\204, indn@, kend=\23345~, kf11=\23320~, kf12=\23321~, 17891 khome=\23344~, kich1=\23340~, knp=\23342~, kpp=\23341~, 17892 ri=\215, rin@, use=amiga-h, 17893 17894# Commodore B-128 microcomputer from Doug Tyrol <det@HEL-ACE.ARPA> 17895# I'm trying to write a termcap for a commodore b-128, and I'm 17896# having a little trouble. I've had to map most of my control characters 17897# to something that unix will accept (my delete-char is a ctrl-t, etc), 17898# and create some functions (like cm), but thats life. 17899# The problem is with the arrow keys - right, and up work fine, but 17900# left deletes the previous character and down I just can't figure out. 17901# Jove knows what I want, but I don't know what it's sending to me (it 17902# isn't thats bound to next-line in jove). 17903# Anybody got any ideas? Here's my termcap. 17904# DAG -- I changed his "^n" entries to "\n"; see if that works. 17905# 17906commodore|b-128|Commodore B-128 micro, 17907 am, bw, 17908 OTdN#20, cols#80, lines#24, pb#150, 17909 OTbc=^H, OTnl=^M, clear=\E\006$<10/>, cr=^M, cud1=^J, 17910 cuf1=^F, cup=\E\013%p1%2d\,%p2%2d\,$<20/>, cuu1=^P, 17911 dch1=\177$<10*/>, dl1=\Ed$<10*/>, el=\Eq$<10/>, 17912 home=\E^E, ht=\011$<5/>, ich1=\E\n$<5/>, il1=\Ei$<10/>, 17913 kcub1=^B, kcud1=^J, kcuf1=^F, kcuu1=^P, khome=\E^E, rmir=, 17914 smir=, 17915 17916#### North Star 17917# 17918# North Star Advantage from Lt. Fickie <brl-ibd!fickie> via BRL 17919northstar|North Star Advantage, 17920 OTbs, 17921 cols#80, lines#24, 17922 clear=\004$<200/>, 17923 cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1/>, ed=\017$<200/>, 17924 el=\016$<200/>, home=\034\032$<200/>, 17925 17926#### Osborne 17927# 17928# Thu Jul 7 03:55:16 1983 17929# 17930# As an aside, be careful; it may sound like an anomaly on the 17931# Osborne, but with the 80-column upgrade, it's too easy to 17932# enter lines >80 columns! 17933# 17934# I've already had several comments... 17935# The Osborne-1 with the 80-col option is capable of being 17936# 52, 80, or 104 characters wide; default to 80 for compatibility 17937# with most systems. 17938# 17939# The tab is destructive on the Ozzie; make sure to 'stty -tabs'. 17940osborne-w|osborne1-w|osborne I in 104-column mode, 17941 msgr, ul, xt, 17942 cols#104, lines#24, 17943 bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 17944 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 17945 dl1=\ER, el=\ET, ich1=\EQ, il1=\EE, ind=^J, kcub1=^H, kcud1=^J, 17946 kcuf1=^L, kcuu1=^K, rmso=\E(, rmul=\Em, smso=\E), smul=\El, 17947# Osborne I from ptsfa!rhc (Robert Cohen) via BRL 17948osborne|osborne1|osborne I in 80-column mode, 17949 OTbs, am, mir, msgr, ul, xhp, 17950 OTdB#4, cols#80, lines#24, 17951 clear=^Z, cub1=\010$<4>, cud1=^J, cuf1=^L, 17952 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, 17953 dch1=\EW$<4/>, dl1=\ER, el=\ET, il1=\EE, is2=^Z, kbs=^H, 17954 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmir=, rmso=\E), 17955 rmul=\Em, smir=\EQ, smso=\E(, smul=\El, 17956# 17957# Osborne Executive definition from BRL 17958# Similar to tvi920 17959# Added by David Milligan and Tom Smith (SMU) 17960osexec|Osborne executive, 17961 OTbs, am, 17962 OTug#1, cols#80, lines#24, xmc#1, 17963 OTnl=^J, bel=^G, clear=^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 17964 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 17965 dl1=\ER, ed=\EY, el=\ET, home=^^, hts=\E1, ich1=\EQ, il1=\EE, 17966 is2=\Eq\Ek\Em\EA\Ex0, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, 17967 kcuu1=^K, kf0=^A@\r, kf1=^AA\r, kf2=^AB\r, kf3=^AC\r, 17968 kf4=^AD\r, kf5=^AE\r, kf6=^AF\r, kf7=^AG\r, kf8=^AH\r, 17969 kf9=^AI\r, rmir=, rmso=\Ek, rmul=\Em, smir=, smso=\Ej, 17970 smul=\El, tbc=\E3, 17971 17972#### Console types for obsolete UNIX clones 17973# 17974# Coherent, Minix, Venix, and several lesser-known kin were OSs for 8088 17975# machines that tried to emulate the UNIX look'n'feel. Coherent and Venix 17976# were commercial, Minix an educational tool sold in conjunction with a book. 17977# Memory-segmentation limits and a strong tendency to look like V7 long after 17978# it was obsolete made all three pretty lame. Venix croaked early. Coherent 17979# and Minix were ported to 32-bit Intel boxes, only to be run over by a 17980# steamroller named `Linux' (which, to be fair, traces some lineage to Minix). 17981# Coherent's vendor, the Mark Williams Company, went belly-up in 1994. There 17982# are also, I'm told, Minix ports that ran on Amiga and Atari machines and 17983# even as single processes under SunOS and the Macintosh OS. 17984# 17985 17986# See 17987# http://www.minix3.org/manpages/man4/console.4.html 17988minix|minix console (v3), 17989 acsc=+\020\,\021-\030.^Y0\333`\004a\261f\370g\361h\260j\331k\277l\332m\300n\305o~p\304q\304r\304s_t\303u\264v\301w\302x\263y\363z\362{\343|\330}\234~\376, 17990 kdch1=\177, kend=\E[Y, kf0=\E[21~, kf1=\E[11~, kf10=\E[21~, 17991 kf11=\E[11;2~, kf12=\E[12;2~, kf13=\E[13;2~, 17992 kf14=\E[14;2~, kf15=\E[15;2~, kf16=\E[17;2~, 17993 kf17=\E[18;2~, kf18=\E[19;2~, kf19=\E[20;2~, kf2=\E[12~, 17994 kf20=\E[21;2~, kf21=\E[11;5~, kf22=\E[12;5~, 17995 kf23=\E[13;5~, kf24=\E[14;5~, kf25=\E[15;5~, 17996 kf26=\E[17;5~, kf27=\E[18;5~, kf28=\E[19;5~, 17997 kf29=\E[20;5~, kf3=\E[13~, kf30=\E[21;5~, kf31=\E[11;6~, 17998 kf32=\E[12;6~, kf33=\E[13;6~, kf34=\E[14;6~, 17999 kf35=\E[15;6~, kf36=\E[17;6~, kf37=\E[18;6~, 18000 kf38=\E[19;6~, kf39=\E[20;6~, kf4=\E[14~, kf40=\E[21;6~, 18001 kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, 18002 kich1=\E[@, knp=\E[U, kpp=\E[V, lf0@, lf1@, lf2@, lf3@, lf4@, lf5@, 18003 use=minix-3.0, 18004 18005minix-3.0|minix console (v3.0), 18006 use=ecma+color, use=minix-1.7, 18007 18008# See 18009# http://www.minix-vmd.org/pub/Minix-vmd/1.7.0/wwwman/man4/console.4.html 18010# This is the entry provided with minix 1.7.4, with bogus :ri: removed. 18011minix-1.7|minix console (v1.7), 18012 am, xenl, 18013 cols#80, it#8, lines#25, 18014 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, 18015 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 18016 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 18017 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 18018 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, el1=\E[2K, 18019 home=\E[H, ht=^I, ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, 18020 il1=\E[L, ind=^J, is2=\E[0m, kbs=^H, kcub1=\E[D, kcud1=\E[B, 18021 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[Y, kf1=\E[V, kf2=\E[U, 18022 kf3=\E[T, kf4=\E[S, kf5=\E[G, khome=\E[H, lf0=End, lf1=PgUp, 18023 lf2=PgDn, lf3=Num +, lf4=Num -, lf5=Num 5, nel=^M^J, 18024 rev=\E[7m, ri=\EM, rmso=\E[0m, rmul=\E[0m, sgr0=\E[0m, 18025 smso=\E[7m, smul=\E[4m, 18026# Corrected Jan 14, 1997 by Vincent Broman <broman@nosc.mil> 18027minix-old|minix-1.5|minix console (v1.5), 18028 xon, 18029 cols#80, it#8, lines#25, 18030 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[0J, cr=^M, 18031 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 18032 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 18033 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 18034 dl=\E[%p1%dM, dl1=\E[M, ed=\E[0J, el=\E[K, home=\E[H, ht=^I, 18035 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 18036 kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 18037 kf0=\E[Y, kf1=\E[V, kf2=\E[U, kf3=\E[T, kf4=\E[S, kf5=\E[G, 18038 khome=\E[H, nel=^M^J, rev=\E[7m, ri=\EM, rmso=\E[0m, 18039 rmul=\E[0m, sgr0=\E[0m, smso=\E[7m, smul=\E[4m, 18040# The linewrap option can be specified by editing /usr/include/minix/config.h 18041# before recompiling the minix 1.5 kernel. 18042minix-old-am|minix console with linewrap, 18043 am, use=minix-old, 18044 18045pc-minix|minix console on an Intel box, 18046 use=klone+acs, use=minix-3.0, 18047 18048# According to the Coherent 2.3 manual, the PC console is similar 18049# to a z19. The differences seem to be (1) 25 lines, (2) no status 18050# line, (3) standout is broken, (4) ins/del line is broken, (5) 18051# has blinking and bold. 18052pc-coherent|pcz19|coherent|IBM PC console running Coherent, 18053 am, mir, 18054 cols#80, it#8, lines#25, 18055 bel=^G, clear=\EE, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 18056 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EN, 18057 ed=\EJ, el=\EK, home=\EH, ht=^I, ind=^J, kbs=^H, kcub1=\ED, 18058 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, ri=\EI, rmir=\EO, 18059 rmso=\Eq, sgr0=\Eq, smir=\E@, smso=\Ep, 18060 18061# According to the Venix 1.1 manual, the PC console is similar 18062# to a DEC vt52. Differences seem to be (1) arrow keys send 18063# different strings, (2) enhanced standout, (3) added insert/delete line. 18064# Note in particular that it doesn't have automatic margins. 18065# There are other keys (f1-f10, kpp, knp, kcbt, kich1, kdch1) but they 18066# not described here because this derives from an old termcap entry. 18067pc-venix|venix|IBM PC console running Venix, 18068 cols#80, it#8, lines#25, 18069 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 18070 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 18071 ed=\EJ, el=\EK, ht=^I, il1=\EL, ind=^J, kbs=^H, kcub1=\EK, 18072 kcud1=\EP, kcuf1=\EM, kcuu1=\EH, khome=\EG, ri=\EI, 18073 18074#### Miscellaneous microcomputer consoles 18075# 18076# If you know anything more about any of these, please tell me. 18077# 18078 18079# The MAI Basic Four computer was obsolete at the end of the 1980s. 18080# It may be used as a terminal by putting it in "line" mode as seen on 18081# one of the status lines. 18082# Initialization is similar to CIT80. <is2> will set ANSI mode for you. 18083# Hardware tabs set by <if> at 8-spacing. Auto line wrap causes glitches so 18084# wrap mode is reset by <cvvis>. Using <ind>=\E[S caused errors so I 18085# used \ED instead. 18086# From: bf347@lafn.org (David Lawyer), 28 Jun 1997 18087mai|basic4|MAI Basic Four in ansi mode, 18088 am, da, db, mir, msgr, 18089 cols#82, it#8, lines#25, 18090 bel=^G, blink=\E[5m, bold=\E[1m, clear=^]^_, cnorm=\E[?7h, 18091 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=^X, 18092 cup=\E[%i%p1%d;%p2%dH, cuu1=^Z, cvvis=\E[?7l, dch1=\E[1P, 18093 dl1=\E[M, ed=^_, el=^^, home=^], ht=^I, 18094 if=/usr/share/tabset/vt100, il1=\E[L, ind=\ED, 18095 is2=\E>\E[?1h\E[?7h\E[?5l\017\E(B\E[m\E[20l\E[1;24r\E[24;1H, 18096 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 18097 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 18098 kf7=\EOV, kf8=\EOW, nel=^M\ED, rc=\E8, rev=\E[7m, ri=\E[T, 18099 rmir=\E[4l, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, 18100 smir=\E[4h, smso=\E[7m, smul=\E[4m, 18101# basis from Peter Harrison, Computer Graphics Lab, San Francisco 18102# ucbvax!ucsfmis!harrison ...uucp / ucbvax!ucsfmis!harrison@BERKELEY ...ARPA 18103# 18104# On Sat, 7 Aug 1999, Torsten Jerzembeck <toje@nightingale.ms.sub.org> wrote: 18105# The Basis 108 was a Apple II clone, manufactured by the "Basis 18106# Mikrocomputer GmbH" in Munster, Germany (the company still exists today, 18107# about 1,5 km from where I live, but doesn't build own computers any 18108# more). A Basis 108 featured a really heavy (cast aluminium?) case, was 18109# equipped with one or two 5.25" disk drives, had a monochrome and colour 18110# video output for a TV set or a dedicated monitor and several slots for 18111# Apple II cards. Basis 108 were quite popular at german schools before 18112# the advent of the IBM PC. They run, for example, the UCSD Pascal 18113# development system (which I used even in 1993 to program the steering 18114# and data recording for our school's experimental solar panel :), Apple DOS 18115# or CP/M. 18116# (basis: removed obsolete ":ma=^K^P^R^L^L :nl=5000*^J:" -- esr) 18117basis|BASIS108 computer with terminal translation table active, 18118 clear=\E*$<300/>, cud1=\n$<5000/>, ed=\EY, el=\ET, kbs=^H, 18119 kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, rmso=\E), sgr0=\E), 18120 smso=\E(, use=adm3a, 18121# luna's BMC terminal emulator 18122luna|luna68k|LUNA68K Bitmap console, 18123 cols#88, lines#46, use=ansi-mini, 18124megatek|pegasus workstation terminal emulator, 18125 am, os, 18126 cols#83, lines#60, 18127# The Xerox 820 was a Z80 micro with a snazzy XEROX PARC-derived 18128# interface (pre-Macintosh by several years) that went nowhere. 18129xerox820|x820|Xerox 820, 18130 am, 18131 cols#80, lines#24, 18132 bel=^G, clear=1^Z, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 18133 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^Q, el=^X, 18134 home=^^, ind=^J, 18135 18136#### Videotex and teletext 18137# 18138 18139# \E\:1} switch to te'le'informatique mode (ascii terminal/ISO 6429) 18140# \E[?3l 80 columns 18141# \E[?4l scrolling on 18142# \E[12h local echo off 18143# \Ec reset: G0 U.S. charset (to get #,@,{,},...), 80 cols, clear screen 18144# \E)0 G1 DEC set (line graphics) 18145# 18146# From: Igor Tamitegama <igor@ppp1493-ft.teaser.fr>, 18 Jan 1997 18147m2-nam|minitel|minitel-2|minitel-2-nam|France Telecom Minitel 2 mode te'le'informatique, 18148 OTbs, eslok, hs, xenl, 18149 cols#80, it#8, lines#24, wsl#72, xmc#0, 18150 acsc=aaffggjjkkllmmnnooqqssttuuvvwwxx, bel=^G, 18151 blink=\E[5m, bold=\E[1m, civis=\E[<1h, clear=\E[H\E[J, 18152 cnorm=\E[<1l, cr=^M, csr=\E[%i%p1%d;%p2%dr, 18153 cub=\E[%p1%dD, cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, 18154 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 18155 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 18156 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, flash=^G, fsl=^J, 18157 home=\E[H, ht=^I, il=\E[%p1%dL, il1=\E[L, ind=^J, ip=$<7/>, 18158 is1=\E\:1}\Ec\E[?4l\E[12h, is2=\Ec\E[12h\E)0, 18159 is3=\E[?3l kbs=\010, kclr=\E[2J, kcub1=\E[D, kcud1=\E[B, 18160 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, kf0=\EOp, 18161 kf1=\EOq, kf10=\EOp, kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, 18162 kf6=\EOv, kf7=\EOw, kf8=\EOx, kf9=\EOy, khome=\E[H, 18163 kich1=\E[4h, kil1=\E[4l, knp=\EOn, kpp=\EOR, ll=\E[24;80H, 18164 mc0=\E[i, nel=^M^J, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, 18165 rmir=\E[4l, rmso=\E[27m, rmul=\E[24m, 18166 rs1=\Ec\E[?4l\E[12h, rs2=\Ec\E)0, sc=\E7, sgr0=\E[m, 18167 smacs=^N, smir=\E[4h, smso=\E[7m, smul=\E[4m, tsl=^_@A, 18168 u6=\E[%i%d;%dR, u7=\E[6n, 18169 18170# From: Alexandre Montaron <canal@mygale.org>, 18 Jun 1998 18171# 18172minitel1|minitel 1, 18173 am, bw, eslok, hs, hz, msgr, 18174 colors#8, cols#40, lines#24, pairs#8, 18175 acsc=+.\,\,./f0g1, bel=^G, blink=\EH, civis=^T, clear=^L, 18176 cnorm=^Q, cr=^M, cub1=^H, cud1=^J, cuf1=^I, 18177 cup=\037%p1%{65}%+%c%p2%{65}%+%c, cuu1=^K, el=^X, 18178 enacs=^Y, fsl=^J, home=^^, ind=^J, 18179 is2=\E;`ZQ\E\:iC\E\:iE\021, nel=^M^J, op=\EG, 18180 rep=%p1%c\022%p2%{63}%+%c, rev=\E], ri=^K, rmso=\E\\, 18181 setf=\E%?%p1%{1}%=%tD%e%p1%{3}%=%tF%e%p1%{4}%=%tA%e%p1%{6}%=%tC%e%p1%{64}%+%c%;, 18182 sgr=%?%p1%t\E]%;%?%p3%t\E]%;%?%p4%t\EH%;, 18183 sgr0=\EI\E\\, smso=\E], tsl=\037@%p1%{65}%+%c, 18184# is2=Fnct TE, Fnct MR, Fnct CM et pour finir: curseur ON. 18185minitel1b|minitel 1-bistandard (in 40cols mode), 18186 mir, 18187 cub=\E[%p1%dD, cud=\E[%p1%dB, cuf=\E[%p1%dC, 18188 cuu=\E[%p1%dA, dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, 18189 dl1=\E[M, ed=\E[J, el1=\E[1K, il=\E[%p1%dL, il1=\E[L, 18190 is1=\E;iYA\E;jYC, kclr=\E[2J, kctab=^I, kcub1=\E[D, 18191 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 18192 kel=^X, khome=\E[H, kich1=\E[4h, kil1=\E[L, rmir=\E[4l, 18193 smir=\E[4h, smkx=\E;iYA\E;jYC, use=minitel1, 18194# <rmkx> posait des problemes (logout en sortant de vi). 18195minitel1b-80|minitel 1-bistandard (standard teleinformatique), 18196 am@, bw@, hz@, 18197 colors@, cols#80, it#8, pairs@, 18198 blink=\E[5m, bold=\E[1m, civis=\037@A\024\n, 18199 clear=\E[H\E[2J, cnorm=\037@A\021\n, cuf1=\E[C, 18200 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 18201 ht=^I, ind=\ED, is1@, is2@, kent=\EOM, kf0=\EOp, kf1=\EOq, 18202 kf2=\EOr, kf3=\EOs, kf4=\EOt, kf5=\EOu, kf6=\EOv, kf7=\EOw, 18203 kf8=\EOx, kf9=\EOy, nel=\EE, op@, rc=\E8, rep@, rev=\E[7m, 18204 ri=\EM, rmkx@, rmso=\E[27m, rmul=\E[24m, sc=\E7, setf@, 18205 sgr=\E[%?%p1%t7;%;%?%p2%t4;%;%?%p3%t7;%;%?%p4%t5;%;%?%p6%t1;%;m, 18206 sgr0=\E[m, smkx@, smso=\E[7m, smul=\E[4m, use=minitel1b, 18207 18208######## OBSOLETE VDT TYPES 18209# 18210# These terminals are *long* dead -- these entries are retained for 18211# historical interest only. 18212 18213#### Amtek Business Machines 18214# 18215 18216# (abm80: early versions of this entry apparently had ":se=\E^_:so=\E^Y", 18217# but these caps were commented out in 8.3; also, removed overridden 18218# ":do=^J:" -- esr) 18219abm80|amtek business machines 80, 18220 OTbs, am, bw, 18221 cols#80, lines#24, 18222 cbt=^T, clear=\E^\, cub1=^H, cud1=\E^K, cuf1=^P, 18223 cup=\E\021%p2%{32}%+%c%p1%{32}%+%c, cuu1=\E^L, 18224 dl1=\E^S, ed=\E^X, el=\E^O, home=\E^R, il1=\E^Z, 18225 18226#### Bell Labs blit terminals 18227# 18228# These were AT&T's official entries. The 5620 FAQ maintained by 18229# David Breneman <daveb@dgtl.com> has this to say: 18230# 18231# Actually, in the beginning was the Jerq, and the Jerq was white with a 18232# green face, and Locanthi and Pike looked upon the Jerq and said the Jerq 18233# was good. But lo, upon the horizon loomed a mighty management-type person 18234# (known now only by the initials VP) who said, the mighty Jerq must stay 18235# alone, and could not go forth into the world. So Locanthi and Pike put the 18236# Jerq to sleep, cloned its parts, and the Blit was brought forth unto the 18237# world. And the Jerq lived the rest of its days in research, but never 18238# strayed from those paths. 18239# 18240# In all seriousness, the Blit was originally known as the Jerq, but when 18241# it started to be shown outside of the halls of the Bell Labs Research 18242# organization, the management powers that be decided that the name could 18243# not remain. So it was renamed to be Blit. This was in late 1981. 18244# 18245# (The AT&T 5620 was the commercialized Blit. Its successors were the 630, 18246# 730, and 730+.) 18247# 18248 18249blit|jerq|blit running teletype rom, 18250 am, eo, ul, xon, 18251 cols#87, it#8, lines#72, 18252 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, 18253 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, 18254 dch=\Ee%p1%{32}%+%c, dch1=\Ee!, dl=\EE%p1%{32}%+%c, 18255 dl1=\EE!, el=\EK, ht=^I, ich=\Ef%p1%{32}%+%c, ich1=\Ef!, 18256 il=\EF%p1%{32}%+%c, il1=\EF!, ind=^J, kbs=^H, kcub1=\ED, 18257 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf1=\Ex, kf2=\Ey, kf3=\Ez, 18258 18259# (cbblit: here's a BSD termcap that says <cud1=\EG> -- esr) 18260cbblit|fixterm|blit running columbus code, 18261 cols#88, 18262 ed=\EJ, flash=\E^G, ich1@, mc4=^T, mc5=^R, mc5p=\EP%p1%03d, 18263 rmir=\ER, rmso=\EV!, rmul=\EV", smir=\EQ, smso=\EU!, 18264 smul=\EU", use=blit, 18265 18266oblit|ojerq|first version of blit rom, 18267 am, da, db, eo, mir, ul, xon, 18268 cols#88, it#8, lines#72, 18269 bel=^G, clear=^L, cr=^M, cub1=\ED, cud1=^J, cuf1=\EC, 18270 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\EO, 18271 dl=\Ee%p1%{32}%+%c, dl1=\EE, ed=\EJ, el=\EK, flash=\E^G, 18272 ht=^I, il=\Ef%p1%{32}%+%c, il1=\EF, ind=^J, kbs=^H, rmir=\ER, 18273 smir=\EQ, 18274 18275#### Bolt, Beranek & Newman (bbn) 18276# 18277# The BitGraph was a product of the now-defunct BBN Computer Corporation. 18278# The parent company, best known as the architects of the Internet, is 18279# still around. 18280# 18281# Jeff DelPapa <dp@world.std.com> writes: 18282# The bitgraph was a large white box that contained a monochrome bitmap 18283# display, and a 68000 to run it. You could download code and run it on 18284# the cpu, it had 128kb (I think) of memory. I used one in the late 18285# 70's, sure beat a vt100. It had one strange feature tho -- it used 18286# the cpu to bitblt pixels to scroll, it took longer than the refresh 18287# rate, and looked like a rubber sheet stretching, then snapping 18288# upwards. It had everything the early mac had, except a floppy drive a 18289# small screen (it had a 17" crisp beauty) and a real OS. They (Bolt 18290# Beranek and Neuman) sold at most a few hundred of them to the real 18291# world. DOD may have bought more... 18292# 18293 18294# Entries for the BitGraph terminals. The problem 18295# with scrolling in vi can only be fixed by getting BBN to put 18296# smarter scroll logic in the terminal or changing vi or padding 18297# scrolls with about 500 ms delay. 18298# 18299# I always thought the problem was related to the terminal 18300# counting newlines in its input buffer before scrolling and 18301# then moving the screen that much. Then vi comes along and 18302# paints lines in on the bottom line of the screen, so you get 18303# this big white gap. 18304 18305bitgraph|bg2.0nv|bg3.10nv|bbn bitgraph 2.0 or later (normal video), 18306 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, 18307 use=bg2.0, 18308bg2.0rv|bg3.10rv|bbn bitgraph 2.0 (reverse video), 18309 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, 18310 use=bg2.0, 18311bg2.0|bg3.10|bbn bitgraph 2.0 or later (no init), 18312 OTbs, xenl, 18313 cols#85, lines#64, 18314 bel=^G, clear=\E[H\E[J$<150>, cr=^M, 18315 csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, cuf1=\E[C, 18316 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, dl1=\E[M$<2*>, 18317 ed=\E[J$<150>, el=\E[K$<2>, ht=^I, il1=\E[L$<2*>, 18318 ind=\n$<280>, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 18319 kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, lf1=PF1, 18320 lf2=PF2, lf3=PF3, lf4=PF4, rc=\E8, rmkx=\E>, rmso=\E[m, sc=\E7, 18321 sgr0=\E[m, smkx=\E=, smso=\E[7m, 18322 18323bg1.25rv|bbn bitgraph 1.25 (reverse video), 18324 flash=\E[?5l$<200/>\E[?5h, is2=\E>\E[?5h\E[?7h, 18325 use=bg1.25, 18326bg1.25nv|bbn bitgraph 1.25 (normal video), 18327 flash=\E[?5h$<200/>\E[?5l, is2=\E>\E[?5l\E[?7h, 18328 use=bg1.25, 18329# (bg1.25: I added <rmam>/<smam> based on the init string -- esr) 18330bg1.25|bbn bitgraph 1.25, 18331 cols#85, lines#64, 18332 bel=^G, clear=\E[H\E[J$<150>, cr=^M, cub1=^H, cud1=\E[B, 18333 cuf1=\E[C, cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, 18334 dl1=\E[M$<2*>, ed=\E[J$<150>, el=\E[K$<2>, ht=^I, 18335 il1=\E[L$<2*>, ind=\n$<280>, kcub1=\ED, kcud1=\EB, 18336 kcuf1=\EC, kcuu1=\EA, kf1=\EP, kf2=\EQ, kf3=\ER, kf4=\ES, 18337 lf1=PF1, lf2=PF2, lf3=PF3, lf4=PF4, ll=\E[64;1H, rmam=\E[?7l, 18338 rmkx=\E>, rmso=\E[m, sgr0=\E[m, smam=\E[?7h, smkx=\E=, 18339 smso=\E[7m, 18340 18341#### Bull (bq, dku, vip) 18342# 18343# (Adapted for terminfo; AIX extension capabilities translated -- esr) 18344 18345#============================================# 18346# BULL QUESTAR 210 `SDP' terminals emulation # 18347#============================================# 18348# 18349# Description written by R.K.Saunders (Bull Transac) 18350# 18351# Modifications written by F. Girard (Bull MTS) 18352# 19-05-87 V02.00.01 18353# 17-12-87 V02.00.02 18354# 15-09-89 V02.00.05 18355# 18356# Typical technical selections F1 (modes SDP/ROLL): 18357# ------------------------------------------------------- 18358# | 01 02 03 04 05 06 07 08 09 10 | 18359# | 1010 0011 1010 0110 0110 0001 0100 0000 0000 0000 | 18360# | | 18361# | 11 12 13 14 15 16 17 18 19 20 | 18362# | 0000 0110 100? 0000 0000 0000 0001 0000 0000 0001 | 18363# | | 18364# | 21 22 23 24 25 26 27 28 29 30 | 18365# | 0011 0000 0001 1000 0000 0000 0000 0000 0000 0000 | 18366# | | 18367# | 31 32 33 34 35 36 37 38 39 40 | 18368# | 1010 0011 0000 0000 0000 0000 0000 0000 0000 0000 | 18369# ------------------------------------------------------- 18370# Typical firmware identification F5 "etat 6": 18371# P287.02.04b (AZERTY) 18372# P297.11.04 (24-pin: 2732) or P798.11.04 (28-pin: 2764) 18373# P298.03.03 (monochrome) or P374.03.02 (colour) 18374# 18375# SM SDP mode (VIP command): ^[[?=h 18376# RIS (erases screen): ^[c 18377# DMI disable keyboard: ^[` 18378# SM double rendition mode: ^[[?>h 18379# RM solicited status mode: ^[[5l 18380# RM character mode: ^[[>l 18381# RM echoplex mode: ^[[12l 18382# RM column tab mode: ^[[18l 18383# RM forbid SS2 keyboard mode: ^[[?<l 18384# SM scroll mode: ^[[=h 18385# FCF enable XON/XOFF: ^[P1s^[\ 18386# MTL select end msg character: ^[[^Wp 18387# EMI enable keyboard: ^[b 18388# RIS retour etat initial: ^[c 18389# enable FC keypad: ^[[?<h, 18390# MPW map status line window: ^[PY99:98^[\ 18391# SCP select status line: ^[[0;98v 18392# ED erase entire partition: ^[[2J 18393# SCP select main partition: ^[[v 18394# SM character insertion mode: ^[[4h 18395# RM character replacement mode: ^[[4l 18396# COO cursor on: ^[[r 18397# COO cursor off: ^[[1r 18398# SGR dim (turquoise) rev attr: ^[[2;7m 18399# SGR Data normal attr: ^[[m 18400# SO Line-graphic mode ON: ^N 18401# SI Line-graphic mode OFF: ^O 18402# MC start routing to printer: ^[[5i 18403# MC stop routing to printer: ^M^[[4i 18404# 18405 18406# This entry covers the following terminals: 18407# dku7102, tws2102, and tws models 2105 to 2112 18408tws-generic|dku7102|Bull Questar tws terminals, 18409 am, eslok, hs, mir, msgr, xenl, xhp@, xon, 18410 cols#80, it#8, lines#24, wsl#80, 18411 acsc=``aaffggj)k\,l&m#n/ooppq*rrsst'u-v+w.x%yyzz{{||}}~~, 18412 bel=^G, blink=\E[0;5m, cbt=\E[Z, civis=\E[1r, clear=\E[2J, 18413 cnorm=\E[r, cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, 18414 cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%df, 18415 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 18416 dim=\E[0;2m, dl=\E[%p1%dM, dl1=\E[M, 18417 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[v, ed=\E[J, el=\E[K, 18418 fsl=\E[v, home=\E[H, ht=\E[I, hts=\EH, il=\E[%p1%dL, 18419 il1=\E[L, ind=^J, invis=\E[0;8m, 18420 is1=\E[?=h\Ec\E`\E[?>h\EPY99\:98\E\\, 18421 is2=\E[5;>;12;18;?<l\E[=h\EP1s\E\\\E[\027p, 18422 is3=\Eb\E[?<h, kbs=^H, kcbt=\E[Z, kctab=\E[g, kcub1=\E[D, 18423 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kdl1=\E[M, 18424 ked=\E[J, kel=\E[K, kf1=\E[1u\027, kf2=\E[2u\027, 18425 kf3=\E[3u\027, kf4=\E[4u\027, kf5=\E[5u\027, 18426 kf6=\E[6u\027, kf7=\E[7u\027, kf8=\E[8u\027, khome=\E[H, 18427 khts=\EH, kil1=\E[L, krmir=\E[4l, ll=\E[H\E[A, mc0=\E[0i, 18428 mc4=\r\E[4i, mc5=\E[5i, rev=\E[0;7m, rmacs=^O, 18429 rmcup=\E[0;98v\E[2J\E[v, rmir=\E[4l, rmso=\E[m, 18430 rmul=\E[m, rs2=\E[?=h\Ec, s0ds=^O, s1ds=^N, 18431 sgr=\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 18432 sgr0=\E[m\017, smacs=^N, smcup=\E[?>h\EPY99\:98\E\\, 18433 smir=\E[4h, smso=\E[0;7m, smul=\E[0;4m, tbc=\E[3g, 18434 tsl=\EPY99\:98\E\\\E[0;98v\E[2;7m, 18435tws2102-sna|dku7102-sna|BULL Questar tws2102 for SNA, 18436 dsl=\E[0;98v\E[2J\E[v, fsl=\E[v, is3=\Eb, tsl=\E[0;98v, 18437 use=tws-generic, 18438tws2103|xdku|BULL Questar tws2103, 18439 ht=^I, use=tws-generic, 18440tws2103-sna|dku7103-sna|BULL Questar tws2103 for SNA, 18441 ht=^I, use=tws2102-sna, 18442dku7102-old|BULL Questar 200 DKU7102 (microcode version < 6), 18443 clear=\E[2J\E[H, cup@, dl@, dl1@, 18444 dsl=\EPY99\:98\E\\\E[0;98v\E[2J\E[H\E[v, el=\E[K\E[m, 18445 il@, il1@, tsl=\EPY99\:98\E\\\E[0;98v\E[H\E[2;7m, 18446 use=tws-generic, 18447dku7202|BULL Questar 200 DKU7202 (colour/character attributes), 18448 blink=\E[0;2;4m, dim=\E[0;5m, ht=^I, is3=\E[?3h\Eb, 18449 sgr=\E[0%?%p1%t;2;4;5;7%;%?%p3%t;7%;%?%p2%t;2%;%?%p4%t;2;4%;%?%p5%t;5%;%?%p7%t;8%;m%?%p9%t\016%e\017%;, 18450 smso=\E[0;4;5;7m, smul=\E[0;2m, use=tws-generic, 18451 18452#=========================================================# 18453# BULL QUESTAR 303 & 310 `DEC VT 320' terminals emulation # 18454#=========================================================# 18455# 18456# Description written by J. Staerck (BULL SA) 18457# Copyright (c) 1989 BULL SA 18458#--------------------------------------------------------------------------- 18459# This entry is used for terminals with vt320 emulation mode 18460# and following set-up : 18461# 8 bit ISO Latin Character Set (ISO 8859-1), 18462# 7 bit Control Characters, 18463# 80 columns screen. 18464# Hereafter are some DEC vt terminals' commands. (valid on vt200 and 300) 18465# They are used in string capabilities with vt220-320 emulation mode. 18466# In the following DEC definitions, two kinds of terminfo databases are 18467# provided : 18468# 1. the first with Command Sequence Introducer starting with escape 18469# sequence in 7 bits characters ex. ESC [ : 2 chars. in 7-bit mode. 18470# 2. the second with Command Sequence Introducer starting with escape 18471# sequence in 8 bits characters ex. ESC [ : 1 char. 'CSI' =x9B. 18472# Soft Terminal Reset esc [ ! p 18473# RIS (erases screen): esc c 18474# DECKPNM numeric keypad mode: esc > 18475# DECKPAM applic. keypad mode: esc = 18476# DECSTBM Scrolling region: esc [ r 18477# SCS select G0 = US: esc ( B 18478# SCS select G1 = line-graphic: esc ) 0 18479# Select 7-bit C1 controls: esc sp F 18480# Select 8-bit C1 controls: esc sp G 18481# Select cursor home: esc [ H 18482# Select erase screen: esc [ J 18483# SM KAM lock keyboard: esc [ 2 h 18484# RM KAM unlock keyboard: esc [ 2 l 18485# SM SRM local echo off: esc [ 1 2 h 18486# RM SRM local echo on: esc [ 1 2 l 18487# SM LNM New line : esc [ 2 0 h 18488# RM LNM return = CR only: esc [ 2 0 l 18489# SM DECCKM cursor keys mode: esc [ ? 1 h 18490# RM DECCKM appli. keys mode: esc [ ? 1 l 18491# SM DECANM ANSI mode on: esc [ ? 2 h 18492# RM DECANM ANSI mode off: esc [ ? 2 l 18493# SM DECCOLM 132-column screen: esc [ ? 3 h 18494# RM DECCOLM 80-column screen: esc [ ? 3 l 18495# SM DECSCLM Smooth scroll: esc [ ? 4 h 18496# RM DECSCLM Jump scroll: esc [ ? 4 l 18497# SM DECSCNM screen light backgr. esc [ ? 5 h 18498# RM DECSCNM screen dark backgr. esc [ ? 5 l 18499# SM DECOM move within margins: esc [ ? 6 h 18500# RM DECOM move outside margins: esc [ ? 6 l 18501# SM DECAWM auto right margin: esc [ ? 7 h 18502# RM DECAWM auto right margin: esc [ ? 7 l 18503# SM DECARM auto repeat: esc [ ? 8 h 18504# RM DECARM auto repeat: esc [ ? 8 l 18505# DECSASD Select active main: esc [ 0 $ } 18506# DECSASD Select active status: esc [ 1 $ } 18507# DECSSDT Select status none: esc [ 0 $ ~ 18508# DECSSDT Select status indic.: esc [ 1 $ ~ 18509# DECSSDT Select status host-wr: esc [ 2 $ ~ 18510# SM DECTCEM Visible cursor: esc [ ? 2 5 h 18511# RM DECTCEM Invisible cursor: esc [ ? 2 5 l 18512# SM DECNCRM 7 bits NCR set: esc [ ? 4 2 h 18513# RM DECNCRM Multi or ISO latin: esc [ ? 4 2 l 18514# SM DECNKM numeric keypad mode: esc [ ? 6 6 h 18515# RM DECNKM numeric keypad appl.: esc [ ? 6 6 l 18516# SM DECKBUM clavier informatique esc [ ? 6 8 h 18517# RM DECKBUM clavier bureautique: esc [ ? 6 8 l 18518# DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 " p 18519# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 0 " p 18520# or DECSCL vt300 mode 8-bit ctrl: esc [ 6 3 ; 2 " p 18521# DECSCL vt300 mode 7-bit ctrl: esc [ 6 3 ; 1 " p 18522# Char. and Line attributes: esc [ Ps ... Ps m 18523# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse 18524# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off 18525# 18526 18527# This entry covers BQ303, BQ306, BQ310, Q303, Q306, Q310 18528bq300|Bull vt320 ISO Latin 1 80 columns terminal, 18529 am, eo, eslok, hs, km, mir, msgr, xenl, xon, 18530 cols#80, it#8, lines#24, vt#3, wsl#80, 18531 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 18532 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 18533 clear=\E[H\E[J, cnorm=\E[?25h, cr=^M, 18534 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=\E[D, 18535 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 18536 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 18537 dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, 18538 dsl=\E[1$}\E[2$~\n\E[0$}, ech=\E[%p1%dX, ed=\E[J, 18539 el=\E[K, el1=\E[1K, enacs=\E(B\E)0, 18540 flash=\E[?5h$<50>\E[?5l, fsl=\E[0$}, home=\E[H, ht=^I, 18541 hts=\EH, ich=\E[%p1%d@, il=\E[%p1%dL, il1=\E[L, ind=\ED, 18542 is1=\E[63;1"p\E[2h, 18543 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18544 is3=\E[0$}\E[?25h\E[2l\E[H\E[J, ka1=\EOw, ka3=\EOy, 18545 kb2=\EOu, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, kcud1=\E[B, 18546 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[3~, kf1=\EOP, kf10=\E[21~, 18547 kf11=\E[23~, kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, 18548 kf15=\E[28~, kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, 18549 kf19=\E[33~, kf2=\EOQ, kf20=\E[34~, kf3=\EOR, kf4=\EOS, 18550 kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~, kfnd=\E[1~, 18551 khlp=\E[28~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 18552 krdo=\E[29~, kslt=\E[4~, lf1=pf1, lf2=pf2, lf3=pf3, lf4=pf4, 18553 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=\E(B, rmam=\E[?7l, 18554 rmcup=\E[?7h, rmir=\E[4l, rmkx=\E[?1l\E>, rmso=\E[27m, 18555 rmul=\E[24m, rs1=\E[!p, rs2=\E[?3l, s0ds=\E(B, s1ds=\E(0, 18556 sc=\E7, 18557 sgr=\E[%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;, 18558 sgr0=\E[0m\E(B, smacs=\E(0, smam=\E[?7h, 18559 smcup=\E[?7l\E[?1l\E(B, smir=\E[4h, smso=\E[7m, 18560 smul=\E[4m, tbc=\E[3g, tsl=\E[1$}\E[2$~, use=ansi+pp, 18561bq300-rv|Bull vt320 reverse 80 columns, 18562 flash=\E[?5l$<50>\E[?5h, 18563 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18564 use=bq300, 18565bq300-w|Bull vt320 132 columns, 18566 cols#132, wsl#132, 18567 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18568 rs2=\E[?3h, use=bq300, 18569bq300-w-rv|Bull vt320 reverse mode 132 columns, 18570 cols#132, wsl#132, 18571 flash=\E[?5l$<50>\E[?5h, 18572 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18573 rs2=\E[?3h, use=bq300, 18574 18575# This entry is used for terminals with vt320 emulation mode 18576# and following set-up : 18577# 8 bit ISO Latin Character Set (ISO 8859-1), 18578# 8 bit Control Characters, (CSI coded as x9B for ESC [) 18579# 80 columns screen. 18580# Soft Terminal Reset csi ! p 18581# RIS (erases screen): esc c 18582# DECKPNM numeric keypad mode: esc > 18583# DECKPAM applic. keypad mode: esc = 18584# DECSTBM Scrolling region: esc [ r 18585# SCS select G0 = US: esc ( B 18586# SCS select G1 = line-graphic: esc ) 0 18587# Select 7-bit C1 controls: esc sp F 18588# Select 8-bit C1 controls: esc sp G 18589# Select cursor home: csi H 18590# Select erase screen: csi J 18591# SM KAM lock keyboard: csi 2 h 18592# RM KAM unlock keyboard: csi 2 l 18593# SM SRM local echo off: csi 1 2 h 18594# RM SRM local echo on: csi 1 2 l 18595# SM LNM New line : csi 2 0 h 18596# RM LNM return = CR only: csi 2 0 l 18597# SM DECCKM cursor keys mode: csi ? 1 h 18598# RM DECCKM appli. keys mode: csi ? 1 l 18599# SM DECANM ANSI mode on: csi ? 2 h 18600# RM DECANM ANSI mode off: csi ? 2 l 18601# SM DECCOLM 132-column screen: csi ? 3 h 18602# RM DECCOLM 80-column screen: csi ? 3 l 18603# SM DECSCLM Smooth scroll: csi ? 4 h 18604# RM DECSCLM Jump scroll: csi ? 4 l 18605# SM DECSCNM screen light backgr. csi ? 5 h 18606# RM DECSCNM screen dark backgr. csi ? 5 l 18607# SM DECOM move within margins: csi ? 6 h 18608# RM DECOM move outside margins: csi ? 6 l 18609# SM DECAWM auto right margin: csi ? 7 h 18610# RM DECAWM auto right margin: csi ? 7 l 18611# SM DECARM auto repeat: csi ? 8 h 18612# RM DECARM auto repeat: csi ? 8 l 18613# DECSASD Select active main: csi 0 $ } 18614# DECSASD Select active status: csi 1 $ } 18615# DECSSDT Select status none: csi 0 $ ~ 18616# DECSSDT Select status indic.: csi 1 $ ~ 18617# DECSSDT Select status host-wr: csi 2 $ ~ 18618# SM DECTCEM Visible cursor: csi ? 2 5 h 18619# RM DECTCEM Invisible cursor: csi ? 2 5 l 18620# SM DECNCRM 7 bits NCR set: csi ? 4 2 h 18621# RM DECNCRM Multi or ISO latin: csi ? 4 2 l 18622# DECSCL vt300 mode 8-bit ctrl: csi 6 3 " p 18623# or DECSCL vt300 mode 8-bit ctrl: csi 6 3 ; 0 " p 18624# DECSCL vt300 mode 7-bit ctrl: csi 6 3 ; 1 " p 18625# Char. and Line attributes: csi Ps ... Ps m 18626# with: 0 All off, 1 Bold, 4 Underline, 5 Blinking, 7 Reverse 18627# and : 22 Bold off, 24 Underline off, 25 Blinking off, 27 Reverse off 18628# (bq300-8: <cub1>,<cuf1>,<cuu1>,<cud1>,<dl1>,<il1> to get under 1024 --esr) 18629bq300-8|Bull vt320 full 8 bits 80 columns, 18630 am, eo, eslok, hs, km, mc5i, mir, msgr, xenl, xon, 18631 cols#80, it#8, lines#24, vt#3, wsl#80, 18632 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 18633 bel=^G, blink=\2335m, bold=\2331m, civis=\233?25l, 18634 clear=\233H\233J, cnorm=\233?25h, cr=^M, 18635 csr=\233%i%p1%d;%p2%dr, cub=\233%p1%dD, cub1=\2331D, 18636 cud=\233%p1%dB, cud1=\2331B, cuf=\233%p1%dC, cuf1=\2331C, 18637 cup=\233%i%p1%d;%p2%dH, cuu=\233%p1%dA, cuu1=\2331A, 18638 dch=\233%p1%dP, dch1=\233P, dl=\233%p1%dM, dl1=\233M, 18639 dsl=\2331$}\2332$~\n\2330$}, ech=\233%p1%dX, ed=\233J, 18640 el=\233K, el1=\2331K, enacs=\E(B\E)0, 18641 flash=\233?5h$<50>\233?5l, fsl=\2330$}, home=\233H, 18642 ht=^I, hts=\EH, ich=\233%p1%d@, il=\233%p1%dL, il1=\233L, 18643 ind=\ED, is1=\E[63;2"p\E[2h, 18644 is2=\E[?2h\E[?3l\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18645 is3=\2330$}\233?25h\2332l\233H\233J, ka1=\217w, 18646 ka3=\217y, kb2=\217u, kbs=^H, kc1=\217q, kc3=\217s, 18647 kcub1=\233D, kcud1=\233B, kcuf1=\233C, kcuu1=\233A, 18648 kdch1=\2333~, kf1=\217P, kf10=\23321~, kf11=\23323~, 18649 kf12=\23324~, kf13=\23325~, kf14=\23326~, kf15=\23328~, 18650 kf16=\23329~, kf17=\23331~, kf18=\23332~, kf19=\23333~, 18651 kf2=\217Q, kf20=\23334~, kf3=\217R, kf4=\217S, kf6=\23317~, 18652 kf7=\23318~, kf8=\23319~, kf9=\23320~, kfnd=\2331~, 18653 khlp=\23328~, kich1=\2332~, knp=\2336~, kpp=\2335~, 18654 krdo=\23329~, kslt=\2334~, lf1=pf1, lf2=pf2, lf3=pf3, 18655 lf4=pf4, mc0=\233i, mc4=\2334i, mc5=\2335i, nel=\EE, rc=\E8, 18656 rev=\2337m, ri=\EM, rmacs=\E(B, rmam=\233?7l, 18657 rmcup=\233?7h, rmir=\2334l, rmkx=\233?1l\E>, 18658 rmso=\23327m, rmul=\23324m, rs1=\E[!p, rs2=\E[?3l, 18659 s0ds=\E(B, s1ds=\E(0, sc=\E7, 18660 sgr=\233%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m%?%p9%t\E(0%e\E(B%;, 18661 sgr0=\2330m\E(B, smacs=\E(0, smam=\233?7h, 18662 smcup=\233?7l\233?1l\E(B, smir=\2334h, smso=\2337m, 18663 smul=\2334m, tbc=\2333g, tsl=\2331$}\2332$~, 18664bq300-8rv|Bull vt320 8-bit reverse mode 80 columns, 18665 flash=\233?5l$<50>\233?5h, 18666 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18667 use=bq300-8, 18668bq300-8w|Bull vt320 8-bit 132 columns, 18669 cols#132, wsl#132, 18670 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18671 rs2=\233?3h, use=bq300-8, 18672bq300-w-8rv|Bull vt320 8-bit reverse mode 132 columns, 18673 cols#132, wsl#132, 18674 flash=\233?5l$<50>\233?5h, 18675 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18676 rs2=\233?3h, use=bq300-8, 18677 18678# This entry is used for terminals with vt320 emulation mode 18679# a 102 keys keyboard (PC scancode !) and following set-up : 18680# 8 bit ISO Latin Character Set (ISO 8859-1), 18681# 7 bit Control Characters, 18682# 80 columns screen. 18683bq300-pc|Questar 303 with PC keyboard ISO Latin 1 80 columns, 18684 kbs=^H, kdch1=\E[3~, kend=\E[4~, kf1=\E[17~, kf10=\E[28~, 18685 kf11=\E[29~, kf12=\E[31~, kf13@, kf14@, kf15@, kf16@, kf17@, 18686 kf18@, kf19@, kf2=\E[18~, kf20@, kf3=\E[19~, kf4=\E[20~, 18687 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, 18688 kfnd@, khlp@, khome=\E[1~, kich1=\E[2~, knp=\E[6~, kpp=\E[5~, 18689 krdo@, kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300, 18690bq300-pc-rv|Questar 303 with PC keyboard reverse mode 80 columns, 18691 flash=\E[?5l$<50>\E[?5h, 18692 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18693 use=bq300-pc, 18694bq300-pc-w|Questar 303 with PC keyboard 132 columns terminal, 18695 cols#132, wsl#132, 18696 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18697 rs2=\E[?3h, use=bq300-pc, 18698bq300-pc-w-rv|Questar 303 with PC keyboard reverse mode 132 columns, 18699 cols#132, wsl#132, 18700 flash=\E[?5l$<50>\E[?5h, 18701 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E F\E[?42l\E[?4l, 18702 rs2=\E[?3h, use=bq300-pc, 18703# 8 bit ISO Latin Character Set (ISO 8859-1), 18704# 8 bit Control Characters, 18705# 80 columns screen. 18706bq300-8-pc|Q306-8-pc|Questar 303 with PC keyboard in full 8 bits 80 columns, 18707 kbs=^H, kdch1=\2333~, kend=\2334~, kf1=\23317~, 18708 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13@, kf14@, 18709 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\23318~, kf20@, 18710 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, 18711 kf7=\23324~, kf8=\23325~, kf9=\23326~, kfnd@, khlp@, 18712 khome=\2331~, kich1=\2332~, knp=\2336~, kpp=\2335~, krdo@, 18713 kslt@, lf1@, lf2@, lf3@, lf4@, use=bq300-8, 18714bq300-8-pc-rv|Questar 303 with PC keyboard full 8 bits reverse mode 80 columns, 18715 flash=\E[?5l$<50>\E[?5h, 18716 is2=\E[?2h\E[?3l\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18717 use=bq300-8-pc, 18718bq300-8-pc-w|Questar 303 with PC keyboard full 8 bits 132 columns, 18719 cols#132, wsl#132, 18720 is2=\E[?2h\E[?3h\E[?5l\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18721 rs2=\E[?3h, use=bq300-8-pc, 18722bq300-8-pc-w-rv|Questar 303 with PC keyboard full 8 bits reverse 132 columns, 18723 cols#132, wsl#132, 18724 flash=\E[?5l$<50>\E[?5h, 18725 is2=\E[?2h\E[?3h\E[?5h\E[?7h\E[?8h\E>\E[?1l\E G\E[?42l\E[?4l, 18726 rs2=\E[?3h, use=bq300-8-pc, 18727 18728#======================================================# 18729# BULL QUESTAR 310 `VIP 7800/8800' terminals emulation # 18730#======================================================# 18731 18732# normal mode, 8 bits, 80 columns terminal. 18733# RES reset : ^[e 18734# RIS reset initial state: ^[c 18735# BLE bell enable ^[h 18736# BLD bell disable ^[g 18737# CAMS char. attr. mode set ^[[D 18738# CAMR char. attr. mode reset ^[[G 18739# CLR clear ^[` 18740# KBU keyboard unlock (set) ^[[W 18741# KBL keyboard lock (reset) ^[[X 18742# CM character mode (async.) ^[k 18743# NEP non echoplex mode (by host) ^[l 18744# EP echoplex mode (by host) ^[m 18745# IM insert mode set ^[[I 18746# IM insert mode reset ^[[J 18747# RMS roll mode set ^[r 18748# RMR roll mode reset ^[q 18749# SM78 set mode vip7800 ^[[1q 18750# SD scroll up (72 lines) ^[[0s 18751# SD scroll down (72 lines) ^[[1s 18752# RBM block mode reset ^[[E 18753# SLS status line set ^[w 18754# SLR status line reset ^[v 18755# SLL status line lock ^[O 18756# LGS Line-graphic mode set ^[G 18757# LGR Line-graphic mode reset ^[F 18758# TBC tab clear (at cursor pos.) ^[[g 18759# TBI tab initialize ^[[N 18760# TBS tab set (at cursor pos.) ^[p 18761# PDS print data space ^[[0p 18762# PHD print host data ^[[3p 18763# PDT print data terminator ^[[<p 18764# PRES print adapter reset ^[[2p 18765# SSPR multi-part. reset ^[[<>u 18766# SSP0 partition 0 set ^[[00u 18767# SSP1 partition n format 1 ^[[PnPnSTRINGu 18768# SSP2 partition n format 2 ^[[PnPnSTRINGu 18769# SSP3 partition n format 3 ^[[PnPnu 18770# ATR attribute (visual) 18771# blink : ^[sB 18772# dim : ^[sL 18773# hide (blank) : ^[sH 18774# restore : ^[sR 18775# inverse video : ^[sI 18776# prot. : ^[sP 18777# underline : ^[s_ 18778# reset : ^{ 18779# 18780# This covers the vip7800 and BQ3155-vip7800 18781vip|Bull Questar 3155-7800, 18782 am, eslok, hs, km, mc5i, msgr, xenl, xon, 18783 cols#80, it#8, lines#24, vt#3, wsl#80, 18784 acsc=0pjdkblamcnkqitgufvhwexj, bel=^G, blink=\EsB, 18785 cbt=\E[Z, clear=\E`, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 18786 cup=\E[%i%p1%03d%p2%03df, cuu1=\EA, dch1=\E[P, dim=\EsL, 18787 dl1=\E[M, dsl=\Ev, ed=\EJ, el=\EK, 18788 flash=\007$<80>\007$<80>\007, fsl=\EO, home=\EH, ht=^I, 18789 hts=\Ep, ich1=\E[I, ind=^J, invis=\EsH, 18790 is2=\E[00u\E[<>001001024080024080u\E[01u, 18791 is3=\Er\E[W\E`, kHOM=\EH, kLFT=\Eo, kRIT=\Eu, kbs=^H, 18792 kcbt=\E[Z, kclr=\E`, kctab=\E[g, kcub1=\ED, kcud1=\EB, 18793 kcuf1=\EC, kcuu1=\EA, kdch1=\E[P, kdl1=\E[M, ked=\EJ, 18794 kel=\EK, kf1=\E0, kf10=\ET, kf11=\E\\, kf12=\E\^, kf13@, kf14@, 18795 kf15@, kf16@, kf17@, kf18@, kf19@, kf2=\E2, kf20@, kf21=\E1, 18796 kf22=\E5, kf23=\E7, kf24=\E9, kf25=\E;, kf26=\E=, kf27=\E?, 18797 kf28=\EQ, kf29=\ES, kf3=\E6, kf30=\EV, kf31=\E], kf32=\E_, 18798 kf4=\E8, kf5=\E\:, kf6=\E<, kf7=\E>, kf8=\EP, kf9=\ER, 18799 khome=\EH, khts=\Ep, kich1=\E[I, kil1=\E[L, kind=\E[0s, 18800 kll=\EH\EA, kri=\E[1s, krmir=\E[J, ktbc=\E[N, lf1=pf1, 18801 lf2=pf2, lf3=pf3, lf4=pf4, ll=\EH\EA, mc0=\E[0p, mc4=\E[<p, 18802 mc5=\E[3p, nel=^M, prot=\EsP, rev=\EsI, 18803 ri=\EA\EJ\EH\E[L$<10>, rmacs=\EF, rmir=\E[J, rmso=\EsR, 18804 rmul=\EsR, rs1=\Ec, rs2=\E[G, s0ds=\EF, s1ds=\EG, 18805 sgr0=\EsR\EsU\EF, smacs=\EG, smir=\E[I, smso=\EsI, 18806 smul=\Es_, tbc=\E[N, tsl=\Ew, 18807# normal screen, 8 bits, 132 columns terminal. 18808vip-w|vip7800-w|Q310-vip-w|Q310-vip-w-am|Questar 3155-vip7800 wide, 18809 cols#132, wsl#132, 18810 is2=\E[00u\E[<>001001024132024132u\E[01u, use=vip, 18811vip-H|vip7800-H|Q310-vip-H|Q310-vip-H-am|Questar 3155-vip7800 72 lines, 18812 lines#72, 18813 is2=\E[00u\E[<>001001024080072080u\E[01u, use=vip, 18814vip-Hw|vip7800-Hw|Q310-vip-Hw|Questar 3155-vip7800 wide 72 lines, 18815 cols#132, lines#72, wsl#132, 18816 is2=\E[00u\E[<>001001024132072132u\E[01u, use=vip, 18817 18818#### Chromatics 18819# 18820 18821# I have put the long strings in <smcup>/<rmcup>. Ti sets up a window 18822# that is smaller than the screen, and puts up a warning message 18823# outside the window. Te erases the warning message, puts the 18824# window back to be the whole screen, and puts the cursor at just 18825# below the small window. I defined <cnorm> and <civis> to really turn 18826# the cursor on and off, but I have taken this out since I don't 18827# like the cursor being turned off when vi exits. 18828cg7900|chromatics|chromatics 7900, 18829 am, 18830 cols#80, lines#40, 18831 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^], 18832 cup=\001M%p2%d\,%p1%d\,, cuu1=^K, dch1=^A<1, dl1=^A<2, 18833 ed=^Al, el=^A`, home=^\, ich1=^A>1, il1=^A>2, ind=^J, ll=^A|, 18834 rmcup=\001W0\,40\,85\,48\,\014\001W0\,0\,85\,48\,\001M0\,40\,, 18835 rmso=\001C1\,\001c2\,, 18836 smcup=\001P0\001O1\001R1\001C4\,\001c0\,\014\001M0\,42\,WARNING DOUBLE ENTER ESCAPE and \025\001C1\,\001c2\,\001W0\,0\,79\,39\,, 18837 smso=\001C4\,\001c7\,, uc=\001\001_\001\0, 18838 18839#### Computer Automation 18840# 18841 18842ca22851|computer automation 22851, 18843 am, 18844 cols#80, lines#24, 18845 bel=^G, clear=\014$<8>, cr=^M, cub1=^U, cud1=^J, cuf1=^I, 18846 cup=\002%i%p1%c%p2%c, cuu1=^V, ed=^\, el=^], home=^^, ind=^J, 18847 kcub1=^U, kcud1=^W, kcuu1=^V, khome=^^, 18848 18849#### Cybernex 18850# 18851 18852# This entry has correct padding and the undocumented "ri" capability 18853cyb83|xl83|cybernex xl-83, 18854 OTbs, am, 18855 cols#80, lines#24, 18856 bel=^G, clear=\014$<62>, cr=^M, cub1=^H, cud1=^J, cuf1=^I, 18857 cup=\027%p1%{32}%+%c%p2%{32}%+%c, cuu1=^N, 18858 ed=\020$<62>, el=\017$<3>, home=^K, ind=^J, kcub1=^H, 18859 kcud1=^J, kcuf1=^I, kcuu1=^N, ri=^N, 18860# (mdl110: removed obsolete ":ma=^Z^P:" and overridden ":cd=145^NA^W:" -- esr) 18861cyb110|mdl110|cybernex mdl-110, 18862 OTbs, am, 18863 cols#80, lines#24, 18864 bel=^G, clear=\030$<70>, cr=^M, cub1=^H, cud1=^J, cuf1=^U, 18865 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^Z, 18866 dch1=\016A\036$<3.5>, dl1=\016A\016\036$<40>, 18867 ed=\016@\026$<6>, el=\016@\026$<145>, home=^Y, 18868 ht=\011$<43>, ich1=\016A\035$<3.5>, 18869 il1=\016A\016\035$<65>, ind=^J, rmso=^NG, smso=^NF, 18870 18871#### Datapoint 18872# 18873# Datapoint is gone. They used to be headquartered in Texas. 18874# They created ARCnet, an Ethernet competitor that flourished for a while 18875# in the early 1980s before 3COM got wise and cut its prices. The service 18876# side of Datapoint still lives (1995) in the form of Intelogic Trace. 18877# 18878 18879dp3360|datapoint|datapoint 3360, 18880 OTbs, am, 18881 cols#82, lines#25, 18882 bel=^G, clear=^]^_, cr=^M, cub1=^H, cud1=^J, cuf1=^X, cuu1=^Z, 18883 ed=^_, el=^^, home=^], ind=^J, 18884 18885# From: Jan Willem Stumpel <jw.stumpel@inter.nl.net>, 11 May 1997 18886# The Datapoint 8242 Workstation was sold at least between 1985 18887# and 1989. To make the terminal work with this entry, press 18888# CONTROL-INT-INT to take the terminal off-line, and type (opt). 18889# Set the options AUTO ROLL, ROLL DN, and ESC KBD on, and AUTO 18890# CR/LF off. Use control-shift-[] as escape key, control-I as tab, 18891# shift-F1 to shift-F5 as F6 to F10 (unshifted F1 to F5 are in 18892# fact unusable because the strings sent by the terminal conflict 18893# with other keys). 18894# The terminal is capable of displaying "box draw" characters. 18895# For each graphic character you must send 2 ESC's (\E\E) followed 18896# by a control character as follows: 18897# character meaning 18898# ========= ======= 18899# ctrl-E top tee 18900# ctrl-F right tee 18901# ctrl-G bottom tee 18902# ctrl-H left tee 18903# ctrl-I cross 18904# ctrl-J top left corner 18905# ctrl-K top right corner 18906# ctrl-L bottom left corner 18907# ctrl-M bottom right corner 18908# ctrl-N horizontal line 18909# ctrl-O vertical line 18910# Unfortunately this cannot be fitted into the termcap/terminfo 18911# description scheme. 18912dp8242|datapoint 8242, 18913 msgr, 18914 cols#80, lines#25, 18915 bel=^G, civis=^Y, clear=\025\E\004\027\030, cnorm=^X, 18916 cr=^M, cub1=^H, cud1=^J, 18917 cup=\011%p2%'\0'%+%c%p1%'\0'%+%c, dl1=\E^Z, ed=^W, el=^V, 18918 home=^U, ht=^I, il1=\E^T, ind=^C, 18919 is1=\E\014\E\016\0\230\0\317\025\027\030\E\004, 18920 kbs=^H, kcub1=^D, kcud1=^B, kcuf1=^F, kcuu1=^E, kf1=^G\Ee, 18921 kf10=\EK\Ea, kf2=^I\Ed, kf3=^J\Ec, kf4=^J\Eb, kf5=^S\Ea, 18922 kf6=\EO\Ee, kf7=\EN\Ed, kf8=\EM\Ec, kf9=\EL\Eb, nel=^M^J, 18923 rep=\E\023%p1%c%p2%c, ri=^K, rmso=\E^D, rmul=\E^D, 18924 rs1=\E\014\E\016\0\230\0\317\025\027\030\E\004, 18925 smso=\E^E, smul=\E^F, 18926 wind=\E\014\E\016%p1%'\0'%+%c%p2%'\0'%+%c%p3%'\0'%+%c%p4%'\0'%+%c\025, 18927 18928#### DEC terminals (Obsolete types: DECwriter and vt40/42/50) 18929# 18930# These entries are DEC's official terminfos for its older terminals. 18931# Contact Bill Hedberg <hedberg@hannah.enet.dec.com> of Terminal Support 18932# Engineering for more information. Updated terminfos and termcaps 18933# are kept available at ftp://gatekeeper.dec.com/pub/DEC/termcaps. 18934# 18935 18936gt40|dec gt40, 18937 OTbs, os, 18938 cols#72, lines#30, 18939 bel=^G, cr=^M, cub1=^H, cud1=^J, 18940gt42|dec gt42, 18941 OTbs, os, 18942 cols#72, lines#40, 18943 bel=^G, cr=^M, cub1=^H, cud1=^J, 18944vt50|dec vt50, 18945 OTbs, 18946 cols#80, lines#12, 18947 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 18948 cuu1=\EA, ed=\EJ, el=\EK, ht=^I, ind=^J, 18949vt50h|dec vt50h, 18950 OTbs, 18951 cols#80, lines#12, 18952 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 18953 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 18954 el=\EK, ht=^I, ind=^J, ri=\EI, 18955# (vt61: there's a BSD termcap that claims <dl1=\EPd>, <il1=\EPf.> <kbs=^H>) 18956vt61|vt-61|vt61.5|dec vt61, 18957 cols#80, lines#24, 18958 bel=^G, clear=\EH\EJ$<120>, cr=\r$<20>, cub1=^H, cud1=^J, 18959 cuf1=\EC$<20>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, 18960 cuu1=\EA$<20>, ed=\EJ$<120>, el=\EK$<70>, ht=^I, 18961 ind=\n$<20>, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, 18962 ri=\E$<20>I, 18963 18964# The gigi does standout with red! 18965# (gigi: I added <rmam>/<smam> based on the init string, corrected cub1 -- esr) 18966gigi|vk100|dec gigi graphics terminal, 18967 OTbs, am, xenl, 18968 cols#84, lines#24, 18969 bel=^G, clear=\E[H\E[2J, cr=^M, cub=\E[%p1%dD, cub1=^H, 18970 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 18971 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, ed=\E[J, 18972 el=\E[K, ht=^I, ind=^J, 18973 is2=\E>\E[?3l\E[?4l\E[?5l\E[?20l\E[?7h\E[?8h, 18974 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, 18975 kf2=\EOQ, kf3=\EOR, kf4=\EOS, khome=\E[H, ri=\EM, 18976 rmam=\E[?7l, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 18977 sgr0=\E[m, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7;31m, 18978 smul=\E[4m, 18979 18980# DEC PRO-350 console (VT220-style). The 350 was DEC's attempt to produce 18981# a PC differentiated from the IBM clones. It was a total, ludicrous, 18982# grossly-overpriced failure (among other things, DEC's OS didn't include 18983# a format program, so you had to buy pre-formatted floppies from DEC at 18984# a hefty premium!). 18985pro350|decpro|dec pro console, 18986 OTbs, 18987 cols#80, it#8, lines#24, 18988 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 18989 clear=\EH\EJ, cub1=^H, cud1=\EB, cuf1=\EC, 18990 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\EJ, 18991 el=\EK, home=\EH, ht=^I, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 18992 kcuu1=\EA, kf0=\EE, kf1=\EF, kf2=\EG, kf3=\EH, kf4=\EI, 18993 kf5=\EJ, kf6=\Ei, kf7=\Ej, khome=\EH, ri=\EI, rmacs=\EG, 18994 rmso=\E^N, rmul=\E^C, smacs=\EF, smso=\E^H, smul=\E^D, 18995 18996dw1|decwriter I, 18997 OTbs, hc, os, 18998 cols#72, 18999 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, 19000dw2|decwriter|dw|decwriter II, 19001 OTbs, hc, os, 19002 cols#132, 19003 bel=^G, cr=^M, cub1=^H, cud1=^J, ind=^J, kbs=^H, 19004# \E(B Use U.S. character set (otherwise # => british pound !) 19005# \E[20l Disable "linefeed newline" mode (else puts \r after \n,\f,\v) 19006# \E[w 10 char/in pitch 19007# \E[1;132 full width horizontal margins 19008# \E[2g clear all tab stops 19009# \E[z 6 lines/in 19010# \E[66t 66 lines/page (for \f) 19011# \E[1;66r full vertical page can be printed 19012# \E[4g clear vertical tab stops 19013# \E> disable alternate keypad mode (so it transmits numbers!) 19014# \E[%i%p1%du set tab stop at column %d (origin == 1) 19015# (Full syntax is \E[n;n;n;n;n;...;nu where each 'n' is 19016# a tab stop) 19017# 19018# The dw3 does standout with wide characters. 19019# 19020dw3|la120|decwriter III, 19021 OTbs, hc, os, 19022 cols#132, 19023 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, 19024 is1=\E(B\E[20l\E[w\E[0;132s\E[2g\E[z\E[66t\E[1;66r\E[4g\E>, 19025 is2=\E[9;17;25;33;41;49;57;65;73;81;89;97;105;113;121;129u\r, 19026 kbs=^H, rmso=\E[w, sgr0=\E[w, smso=\E[6w, 19027dw4|decwriter IV, 19028 OTbs, am, hc, os, 19029 cols#132, 19030 bel=^G, cr=^M, cub1=^H, cud1=^J, ht=^I, ind=^J, is2=\Ec, kbs=^H, 19031 kf0=\EOP, kf1=\EOQ, kf2=\EOR, kf3=\EOS, 19032 19033# These aren't official 19034ln03|dec ln03 laser printer, 19035 hc, 19036 cols#80, lines#66, 19037 bel=^G, cr=^M, cud1=^J, hd=\EK, ht=^I, hu=\EL, ind=^J, nel=^M^J, 19038 rmso=\E[22m, rmul=\E[24m, sgr0=\E[m, smso=\E[1m, 19039 smul=\E[4m, 19040ln03-w|dec ln03 laser printer 132 cols, 19041 cols#132, 19042 bel=^G, cr=^M, cud1=^J, ht=^I, ind=^J, kbs=^H, kcub1=^H, 19043 kcud1=^J, nel=^M^J, use=ln03, 19044 19045#### Delta Data (dd) 19046# 19047 19048# Untested. The cup sequence is hairy enough that it probably needs work. 19049# The idea is ctrl(O), dd(row), dd(col), where dd(x) is x - 2*(x%16) + '9'. 19050# There are BSD-derived termcap entries floating around for this puppy 19051# that are *certainly* wrong. 19052delta|dd5000|delta data 5000, 19053 OTbs, am, 19054 cols#80, lines#27, 19055 bel=^G, clear=^NR, cub1=^H, cud1=^J, cuf1=^Y, 19056 cup=\017%p1%p1%{16}%m%{2}%*%-%{57}%+%c%p2%p2%{16}%m%{2}%*%-%{57}%+%c, 19057 cuu1=^Z, dch1=^NV, el=^NU, home=^NQ, ind=^J, 19058 19059#### Digital Data Research (ddr) 19060# 19061 19062# (ddr: I added <rmam>/<smam> based on the init string -- esr) 19063ddr|rebus3180|ddr3180|Rebus/DDR 3180 vt100 emulator, 19064 OTbs, am, xenl, 19065 cols#80, it#8, lines#24, vt#3, 19066 blink=\E[5m$<2/>, bold=\E[1m$<2/>, 19067 clear=\E[H\E[2J$<50/>, csr=\E[%i%p1%d;%p2%dr, cub1=^H, 19068 cud1=^J, cuf1=\E[C$<2/>, cup=\E[%i%p1%d;%p2%dH$<5/>, 19069 cuu1=\E[A$<2/>, ed=\E[J$<50/>, el=\E[K$<3/>, home=\E[H, 19070 ht=^I, ind=\ED$<5/>, is2=\E[1;24r\E[24;1H, kbs=^H, 19071 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, 19072 kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m$<2/>, 19073 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, rmam=\E[7l, 19074 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m$<2/>, 19075 rs1=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sc=\E7, 19076 sgr0=\E[m$<2/>, smam=\E[7l, smkx=\E[?1h\E=, smso=\E[7m, 19077 smul=\E[4m$<2/>, 19078 19079#### Evans & Sutherland 19080# 19081 19082# Jon Leech <leech@cs.unc.edu> tells us: 19083# The ps300 was the Evans & Sutherland Picture System 300, a high 19084# performance 3D vector graphics system with a bunch of specialized hardware. 19085# Approximate date of release was 1982 (early 80s, anyway), and it had several 19086# evolutions including (limited) color versions such as the PS330C. PS300s 19087# were effectively obsolete by the late 80s, replaced by raster graphics 19088# systems, although specialized applications like molecular modelling 19089# hung onto them for a while longer. AFAIK all E&S vector graphics systems 19090# are out of production, though of course E&S is very much alive (in 1996). 19091# (ps300: changed ":pt@:" to "it@" -- esr) 19092# 19093ps300|Picture System 300, 19094 xt, 19095 it@, 19096 rmso@, rmul@, smso@, smul@, use=vt100, 19097 19098#### General Electric (ge) 19099# 19100 19101terminet1200|terminet300|tn1200|tn300|terminet|GE terminet 1200, 19102 OTbs, hc, os, 19103 cols#120, 19104 bel=^G, cr=^M, cud1=^J, ind=^J, 19105 19106#### Heathkit/Zenith 19107# 19108 19109# Here is a description of the H19 DIP switches: 19110# 19111# S401 19112# 0-3 = baud rate as follows: 19113# 19114# 3 2 1 0 19115# --- --- --- --- 19116# 0 0 1 1 300 baud 19117# 0 1 0 1 1200 baud 19118# 1 0 0 0 2400 baud 19119# 1 0 1 0 4800 baud 19120# 1 1 0 0 9600 baud 19121# 1 1 0 1 19.2K baud 19122# 19123# 4 = parity (0 = no parity) 19124# 5 = even parity (0 = odd parity) 19125# 6 = stick parity (0 = normal parity) 19126# 7 = full duplex (0 = half duplex) 19127# 19128# S402 19129# 0 = block cursor (0 = underscore cursor) 19130# 1 = no key click (0 = keyclick) 19131# 2 = wrap at end of line (0 = no wrap) 19132# 3 = auto LF on CR (0 = no LF on CR) 19133# 4 = auto CR on LF (0 = no CR on LF) 19134# 5 = ANSI mode (0 = VT52 mode) 19135# 6 = keypad shifted (0 = keypad unshifted) 19136# 7 = 50Hz refresh (1 = 60Hz refresh) 19137# 19138# Factory Default settings are as follows: 19139# 7 6 5 4 3 2 1 0 19140# S401 1 0 0 0 1 1 0 0 19141# S402 0 0 0 0 0 0 0 0 19142# (h19: I added <rmam>/<smam> based on the init string; 19143# also added empty <acsc> to suppress a tic warning -- esr) 19144h19-a|h19a|heath-ansi|heathkit-a|heathkit h19 ansi mode, 19145 OTbs, am, mir, msgr, 19146 cols#80, it#8, lines#24, 19147 acsc=, bel=^G, clear=\E[2J, cnorm=\E[>4l, cr=^M, cub1=^H, 19148 cud1=\E[1B, cuf1=\E[1C, cup=\E[%i%p1%d;%p2%dH, 19149 cuu1=\E[1A, cvvis=\E[>4h, dch1=\E[1P, dl1=\E[1M$<1*>, 19150 ed=\E[J, el=\E[K, home=\E[H, ht=^I, il1=\E[1L$<1*>, ind=^J, 19151 is2=\E<\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m\E[?7h, 19152 kbs=^H, kcub1=\E[1D, kcud1=\E[1B, kcuf1=\E[1C, kcuu1=\E[1A, 19153 kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, 19154 kf7=\EOQ, kf8=\EOR, khome=\E[H, lf6=blue, lf7=red, lf8=white, 19155 ri=\EM, rmacs=\E[11m, rmam=\E[?7l, rmir=\E[4l, rmso=\E[m, 19156 smacs=\E[10m, smam=\E[?7h, smir=\E[4h, smso=\E[7m, 19157h19-bs|heathkit w/keypad shifted, 19158 rmkx=\Eu, smkx=\Et, use=h19-b, 19159h19-us|h19us|h19-smul|heathkit w/keypad shifted/underscore cursor, 19160 rmkx=\Eu, smkx=\Et, use=h19-u, 19161# (h19: merged in <ip> from BSDI hp19-e entry>; 19162# also added empty <acsc> to suppress a tic warning --esr) 19163# From: Tim Pierce <twp@skepsis.com>, 23 Feb 1998 19164# Tim tells us that: 19165# I have an old Zenith-19 terminal at home that still gets a lot of use. 19166# This terminal suffers from the same famous insert-mode padding lossage 19167# that has been acknowledged for the Z29 terminal. Emacs is nearly 19168# unusable on this box, since even a half-scroll up or down the window 19169# causes flaming terminal death. 19170# 19171# On the Z19, the only way I have found around this problem is to remove 19172# the :al: and :dl: entries entirely. No amount of extra padding will 19173# help (I have tried up to 20000). Removing <il1=\EL$> and <dl1=\EM$> 19174# makes Emacs a little slower, but it remains in the land of the living. 19175# Big win. 19176h19|heath|h19-b|heathkit|heath-19|z19|zenith|heathkit h19, 19177 OTbs, am, eslok, hs, mir, msgr, 19178 cols#80, it#8, lines#24, 19179 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, bel=^G, 19180 clear=\EE, cnorm=\Ey4, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 19181 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, cvvis=\Ex4, 19182 dch1=\EN, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, ind=^J, 19183 ip=<1.5/>, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 19184 kcuu1=\EA, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, kf5=\EW, 19185 kf6=\EP, kf7=\EQ, kf8=\ER, khome=\EH, lf6=blue, lf7=red, 19186 lf8=white, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF, 19187 smir=\E@, smso=\Ep, tsl=\Ej\Ex5\EY8%p1%{32}%+%c\Eo\Eo, 19188h19-u|heathkit with underscore cursor, 19189 cnorm@, cvvis@, use=h19-b, 19190h19-g|h19g|heathkit w/block cursor, 19191 cnorm=\Ex4, cvvis@, use=h19-b, 19192alto-h19|altoh19|altoheath|alto-heath|alto emulating heathkit h19, 19193 lines#60, 19194 dl1=\EM, il1=\EL, use=h19, 19195 19196# The major problem with the Z29 is that it requires more padding than the Z19. 19197# 19198# The problem with declaring an H19 to be synonymous with a Z29 is that 19199# it needs more padding. It especially loses if a program attempts 19200# to put the Z29 into insert mode and insert text at 9600 baud. It 19201# even loses worse if the program attempts to insert tabs at 9600 19202# baud. Adding padding to text that is inserted loses because in 19203# order to make the Z29 not die, one must add so much padding that 19204# whenever the program tries to use insert mode, the effective 19205# rate is about 110 baud. 19206# 19207# What program would want to put the terminal into insert mode 19208# and shove stuff at it at 9600 baud you ask? 19209# 19210# Emacs. Emacs seems to want to do the mathematically optimal 19211# thing in doing a redisplay rather than the practical thing. 19212# When it is about to output a line on top of a line that is 19213# already on the screen, instead of just killing to the end of 19214# the line and outputting the new line, it compares the old line 19215# and the new line and if there are any similarities, it 19216# constructs the new line by deleting the text on the old line 19217# on the terminal that is already there and then inserting new 19218# text into the line to transform it into the new line that is 19219# to be displayed. The Z29 does not react kindly to this. 19220# 19221# But don't cry for too long.... There is a solution. You can make 19222# a termcap entry for the Z29 that says the Z29 has no insert mode. 19223# Then Emacs cannot use it. "Oh, no, but now inserting into a 19224# line will be really slow", you say. Well there is a sort of a 19225# solution to that too. There is an insert character option on 19226# the Z29 that will insert one character. Unfortunately, it 19227# involves putting the terminal into ansi mode, inserting the 19228# character, and changing it back to H19 mode. All this takes 12 19229# characters. Pretty expensive to insert one character, but it 19230# works. Either Emacs doesn't try to use its inserting hack when 19231# it's only given an insert character ability or the Z29 doesn't 19232# require padding with this (the former is probably more likely, 19233# but I haven't checked it out). 19234# (z29: added empty <acsc> to suppress a tic warning, merged in 19235# status line capabilities from BRL entry --esr) 19236z29|zenith29|z29b|zenith z29b, 19237 OTbs, OTpt, am, eslok, hs, mir, msgr, 19238 OTkn#10, cols#80, lines#24, 19239 OTbc=\ED, acsc=, bel=^G, cbt=\E-, clear=\EE$<14>, cnorm=\Ey4, 19240 cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 19241 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\E$<1>A, 19242 cvvis=\Ex4, dch1=\EN$<0.1*>, dl1=\EM$<1/>, dsl=\Ey1, 19243 ed=\EJ$<14>, el=\EK$<1>, fsl=\Ek\Ey5, home=\EH, ht=^I, 19244 ich1=\E<\E[1@\E[?2h$<1>, il1=\EL$<1/>, ind=\n$<2>, 19245 is2=\E<\E[?2h\Ev, kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, 19246 kcuu1=\EA, kf0=\E~, kf1=\ES, kf2=\ET, kf3=\EU, kf4=\EV, 19247 kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\E0I, khome=\EH, 19248 lf0=home, ri=\EI$<2/>, rmacs=\EF, rmir=\EO, rmso=\Eq, 19249 rmul=\Es0, smacs=\EG, smir=\E@, smso=\Ep, smul=\Es8, 19250 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, 19251# z29 in ansi mode. Assumes that the cursor is in the correct state, and that 19252# the world is stable. <rs1> causes the terminal to be reset to the state 19253# indicated by the name. kc -> key click, nkc -> no key click, uc -> underscore 19254# cursor, bc -> block cursor. 19255# From: Mike Meyers 19256# (z29a: replaced nonexistent <if=/usr/share/tabset/zenith29> befause <hts> 19257# looks vt100-compatible -- esr) 19258z29a|z29a-kc-bc|h29a-kc-bc|heath/zenith 29 in ansi mode, 19259 OTbs, OTpt, am, eslok, hs, mir, msgr, 19260 OTkn#10, cols#80, it#8, lines#24, 19261 OTbc=\ED, bel=^G, blink=\E[5m, bold=\E[2m, clear=\E[2J, 19262 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 19263 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C, 19264 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 19265 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, 19266 dl1=\E[M, dsl=\E[>1l, ed=\E[J, el=\E[K, fsl=\E[u\E[>5l, 19267 home=\E[H, ht=^I, hts=\EH, if=/usr/share/tabset/vt100, 19268 il=\E[%p1%dL, il1=\E[L, ind=\ED, kbs=^H, kclr=\E[J, 19269 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, ked=\E[J, 19270 kf0=\E[~, kf1=\EOS, kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, 19271 kf6=\EOP, kf7=\EOQ, kf8=\EOR, kf9=\EOX, khome=\E[H, lf0=help, 19272 mc0=\E#7, nel=^M\ED, rc=\E[r, rev=\E[7m, ri=\EM, 19273 rmcup=\E[?7h, rmso=\E[m, rmul=\E[m, 19274 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>4h\E[>1;2;3;5;6;7;8;9l\E[m\E[11m, 19275 sc=\E[s, sgr0=\E[m, smcup=\E[?7l, smso=\E[7;2m, smul=\E[4m, 19276 tbc=\E[3g, tsl=\E[s\E[>5;1h\E[25;%i%dH\E[1K, 19277z29a-kc-uc|h29a-kc-uc|z29 ansi mode with keyckick and underscore cursor, 19278 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>1;2;3;4;5;6;7;8;9l\E[m\E[11m, 19279 use=z29a, 19280z29a-nkc-bc|h29a-nkc-bc|z29 ansi mode with block cursor and no keyclick, 19281 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2;4h\E[>1;3;5;6;7;8;9l\E[m\E[11m, 19282 use=z29a, 19283z29a-nkc-uc|h29a-nkc-uc|z29 ansi mode with underscore cursor and no keyclick, 19284 rs1=\E<\E[1;24r\E[24;1H\E[?7h\E[>2h\E[>1;3;4;5;6;7;8;9l\E[m\E[11m, 19285 use=z29a, 19286# From: Jeff Bartig <jeffb@dont.doit.wisc.edu> 31 Mar 1995 19287z39-a|z39a|zenith39-a|zenith39-ansi|Zenith 39 in ANSI mode, 19288 am, eslok, hs, mc5i, mir, msgr, xon, 19289 cols#80, lines#24, 19290 acsc=0a``aaffggjjkkllmmnnooqqssttuuvvwwxx~~, bel=^G, 19291 blink=\E[5m, bold=\E[1m, cbt=\E[1Z, civis=\E[>5h, 19292 clear=\E[2J\E[H, cnorm=\E[>5l, cr=^M, 19293 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 19294 cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, cuf1=\E[C, 19295 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A, 19296 dch=\E[%p1%dP, dch1=\E[1P, dim=\E[2m, dl=\E[%p1%dM, 19297 dl1=\E[1M, dsl=\E[>1l, ed=\E[0J, el=\E[0K, el1=\E[1K, 19298 fsl=\E[u, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL, il1=\E[1L, 19299 ind=^J, is2=\E<\E[>1;3;5;6;7l\E[0m\E[2J, ka1=\EOw, 19300 ka3=\EOu, kb2=\EOy, kbs=^H, kc1=\EOq, kc3=\EOs, kcub1=\E[D, 19301 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, ked=\E[J, kf1=\EOS, 19302 kf2=\EOT, kf3=\EOU, kf4=\EOV, kf5=\EOW, kf6=\EOP, kf7=\EOQ, 19303 kf8=\EOR, kf9=\EOX, khlp=\E[~, khome=\E[H, ll=\E[24;1H, 19304 mc0=\E[?19h\E[i, mc4=\E[4i, mc5=\E[5i, rc=\E[u, rev=\E[7m, 19305 rmacs=\E(B, rmir=\E[4l, rmkx=\E[>7l, rmso=\E[0m, 19306 rmul=\E[0m, rs2=\E<\Ec\0, sc=\E[s, sgr0=\E[0m, smacs=\E(0, 19307 smir=\E[4h, smkx=\E[>7h, smso=\E[7m, smul=\E[4m, tbc=\E[3g, 19308 tsl=\E[s\E[>1h\E[25;%i%p1%dH, 19309 19310# From: Brad Brahms <Brahms@USC-ECLC> 19311z100|h100|z110|z-100|h-100|heath/zenith z-100 pc with color monitor, 19312 cnorm=\Ey4\Em70, cvvis=\Ex4\Em71, use=z100bw, 19313# (z100bw: removed obsolete ":kn#10:", added empty <acsc> -- esr) 19314z100bw|h100bw|z110bw|z-100bw|h-100bw|heath/zenith z-100 pc, 19315 OTbs, OTpt, mir, msgr, 19316 OTkn#10, cols#80, it#8, lines#24, 19317 acsc=+h.kaiggjdkclfmenbozqas{tvutvuwsx`~\^, 19318 clear=\EE$<5*/>, cnorm=\Ey4, cub1=^H, cud1=\EB, cuf1=\EC, 19319 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<1*/>, cuu1=\EA, 19320 cvvis=\Ex4, dch1=\EN$<1*/>, dl1=\EM$<5*/>, ed=\EJ, el=\EK, 19321 home=\EH, ht=^I, il1=\EL$<5*/>, kbs=^H, kcub1=\ED, kcud1=\EB, 19322 kcuf1=\EC, kcuu1=\EA, kf0=\EJ, kf1=\ES, kf2=\ET, kf3=\EU, 19323 kf4=\EV, kf5=\EW, kf6=\EP, kf7=\EQ, kf8=\ER, kf9=\EOI, 19324 khome=\EH, ri=\EI, rmacs=\EG, rmir=\EO, rmso=\Eq, smacs=\EF, 19325 smir=\E@, smso=\Ep, 19326p19|h19-b with il1/dl1, 19327 dl1=\EM$<2*/>, il1=\EL$<2*/>, use=h19-b, 19328# From: <ucscc!B.fiatlux@ucbvax.berkeley.edu> 19329# (ztx: removed duplicate :sr: -- esr) 19330ztx|ztx11|zt-1|htx11|ztx-1-a|ztx-10 or 11, 19331 OTbs, am, eslok, hs, 19332 cols#80, it#8, lines#24, 19333 clear=\EE, cub1=^H, cud1=^J, cuf1=\EC, 19334 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dl1=\EM, 19335 dsl=\Ey1, ed=\EJ, el=\EK, fsl=\Ek\Ey5, home=\EH, ht=^I, 19336 il1=\EL, is2=\Ej\EH\Eq\Ek\Ev\Ey1\Ey5\EG\Ey8\Ey9\Ey>, 19337 kbs=^H, kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kf0=\ES, 19338 kf1=\EB, kf2=\EU, kf3=\EV, kf4=\EW, kf5=\EP, kf6=\EQ, kf7=\ER, 19339 ri=\EI, rmso=\Eq, rmul=\Eq, smso=\Es5, smul=\Es2, 19340 tsl=\Ej\Ex5\Ex1\EY8%+ \Eo, 19341 19342#### IMS International (ims) 19343# 19344# There was a company called IMS International located in Carson City, 19345# Nevada, that flourished from the mid-70s to mid-80s. They made S-100 19346# bus/Z80 hardware and a line of terminals called Ultimas. 19347# 19348 19349# From: Erik Fair <fair@ucbarpa.berkeley.edu> Sun Oct 27 07:21:05 1985 19350ims950-b|bare ims950 no init string, 19351 is2@, use=ims950, 19352# (ims950: removed obsolete ":ko@:" -- esr) 19353ims950|ims televideo 950 emulation, 19354 xenl@, 19355 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, 19356 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950, 19357# (ims950-rv: removed obsolete ":ko@:" -- esr) 19358ims950-rv|ims tvi950 rev video, 19359 xenl@, 19360 flash@, kbs@, kcub1@, kcud1@, kcuf1@, kcuu1@, kf0@, kf1@, kf2@, kf3@, 19361 kf4@, kf5@, kf6@, kf7@, kf8@, kf9@, khome@, use=tvi950-rv, 19362ims-ansi|ultima2|ultimaII|IMS Ultima II, 19363 OTbs, am, 19364 cols#80, it#8, lines#24, 19365 clear=\E[H\E[2J, cub1=^H, cud1=\ED, cuf1=\EC, 19366 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\EM, ed=\E[0J, el=\E[0K, 19367 ht=^I, if=/usr/share/tabset/vt100, 19368 is2=\E[m\E[>14l\E[?1;?5;20l\E>\E[1m\r, kcub1=\E[D, 19369 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, khome=\E[H, ri=\EM, 19370 rmso=\E[m\E[1m, rmul=\E[m\E[1m, sgr0=\E[m, smso=\E[7m, 19371 smul=\E[4m, 19372 19373#### Intertec Data Systems 19374# 19375# I think this company is long dead as of 1995. They made an early CP/M 19376# micro called the "Intertec Superbrain" that was moderately popular, 19377# then sank out of sight. 19378# 19379 19380superbrain|intertec superbrain, 19381 OTbs, am, bw, 19382 cols#80, lines#24, 19383 OTbc=^U, bel=^G, clear=\014$<5*>, cr=^M, cub1=^H, cud1=^J, 19384 cuf1=^F, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<20>, cuu1=^K, 19385 ed=\E~k<10*>, el=\E~K$<15>, ht=^I, ind=^J, kcub1=^U, 19386 kcud1=^J, kcuf1=^F, kcuu1=^K, rmcup=^L, smcup=^L, 19387# (intertube: a Gould entry via BRL asserted smul=\E0@$<200/>, 19388# rmul=\E0A$<200/>; my guess is the highlight letter is bit-coded like an ADM, 19389# and the reverse is actually true. Try it. -- esr) 19390intertube|intertec|Intertec InterTube, 19391 OTbs, am, 19392 cols#80, lines#25, 19393 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^F, 19394 cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<50>, cuu1=^Z, home=^A, 19395 ind=^J, rmso=\E0@, smso=\E0P, 19396# The intertube 2 has the "full duplex" problem like the tek 4025: if you 19397# are typing and a command comes in, the keystrokes you type get interspersed 19398# with the command and it messes up 19399intertube2|intertec data systems intertube 2, 19400 OTbs, 19401 cup=\016%p1%c\020%p2%{10}%/%{16}%*%p2%{10}%m%+%c, 19402 el=\EK, hpa=\020%p1%{10}%/%{16}%*%p1%{10}%m%+%c, 19403 ll=^K^X\r, vpa=\013%p1%c, use=intertube, 19404 19405#### Ithaca Intersystems 19406# 19407# This company made S100-bus personal computers long ago in the pre-IBM-PC 19408# past. They used to be reachable at: 19409# 19410# Ithaca Intersystems 19411# 1650 Hanshaw Road 19412# Ithaca, New York 14850 19413# 19414# However, the outfit went bankrupt years ago. 19415# 19416 19417# The Graphos III was a color graphics terminal from Ithaca Intersystems. 19418# These entries were written (originally in termcap syntax) by Brian Yandell 19419# <yandell@stat.wisc.edu> and Mike Meyer <mikem@stat.wisc.edu> at the 19420# University of Wisconsin. 19421 19422# (graphos: removed obsolete and syntactically incorrect :kn=4:, 19423# removed <if=/usr/share/tabset/init.graphos> and 19424# <rf=/usr/share/tabset/init.graphos> no such file & no <hts> -- esr) 19425graphos|graphos III, 19426 am, mir, 19427 cols#80, it#8, lines#24, 19428 clear=\E[H\E[2J, cnorm=\Ez56;2;0;0z\Ez73z\Ez4;1;1z, 19429 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=\E[B, 19430 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 19431 cuu=\E[%p1%dA, cuu1=\E[A, 19432 cvvis=\Ez4;2;1z\Ez56;2;80;24z, dch1=\E[P, dl=\E[%p1%dM, 19433 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, il=\E[%p1%dL, 19434 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 19435 kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, kf3=\EOR, 19436 kf4=\EOS, khome=\E[H, nel=^M\ED, rc=\E8, ri=\EM, rmdc=\E[4l, 19437 rmir=\E[4l, rmso=\E[m, sc=\E7, sgr0=\E[m, smdc=\E[4h, 19438 smir=\E[4h, smso=\E[7m, 19439graphos-30|graphos III with 30 lines, 19440 lines#30, 19441 cvvis=\Ez4;2;1z\Ez56;2;80;30z, use=graphos, 19442 19443#### Modgraph 19444# 19445# These people used to be reachable at: 19446# 19447# Modgraph, Inc 19448# 1393 Main Street, 19449# Waltham, MA 02154 19450# Vox: (617)-890-5796. 19451# 19452# However, if you call that number today you'll get an insurance company. 19453# I have mail from "Michael Berman, V.P. Sales, Modgraph" dated 19454# 26 Feb 1997 that says: 19455# 19456# Modgraph GX-1000, replaced by GX-2000. Both are out of production, have been 19457# for ~7 years. Modgraph still in business. Products are rugged laptop and 19458# portable PC's and specialized CRT and LCD monitors (rugged, rack-mount 19459# panel-mount etc). I can be emailed at sonfour@aol.com 19460# 19461# Peter D. Smith <pdsmith@nbbn.com> notes that his modgraph manual was 19462# dated 1984. According to the manual, it featured Tek 4010/4014 19463# graphics and DEC VT100/VT52 + ADM-3A emulation with a VT220-style keyboard. 19464# 19465 19466modgraph|mod24|modgraph terminal emulating vt100, 19467 xenl@, 19468 cols#80, lines#24, 19469 cvvis=\E\^9;0s\E\^7;1s, 19470 is2=\E\^9;0s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s, 19471 rf@, ri=\EM\E[K$<5/>, use=vt100, 19472# The GX-1000 manual is dated 1984. This looks rather like a VT-52. 19473modgraph2|modgraph gx-1000 80x24 with keypad not enabled, 19474 am, da, db, 19475 cols#80, it#8, lines#24, 19476 clear=\EH\EJ$<50/>, cub1=^H, cud1=\EB$<2/>, 19477 cuf1=\EC$<2/>, cup=\EY%p1%{32}%+%c%p2%{32}%+%c$<5/>, 19478 cuu1=\EA$<2/>, ed=\EJ$<50/>, el=\EK$<3/>, ht=^I, 19479 is2=\E<\E\^5;2s\E\^7;1s\E[3g\E\^11;9s\E\^11;17s\E\^11;25s\E\^11;33s\E\^11;41s\E\^11;49s\E\^11;57s\E\^11;65s\E\^11;73s\E\^11;81s\E\^11;89s\E\^12;0s\E\^14;2s\E\^15;9s\E\^25;1s\E\^9;1s\E\^27;1, 19480 ri=\EI$<5/>, 19481# 19482# Modgraph from Nancy L. Cider <nancyc@brl-tbd> 19483# BUG NOTE from Barbara E. Ringers <barb@brl-tbd>: 19484# If we set TERM=vt100, and set the Modgraph screen to 24 lines, setting a 19485# mark and using delete-to-killbuffer work correctly. However, we would 19486# like normal mode of operation to be using a Modgraph with 48 line setting. 19487# If we set TERM=mod (which is a valid entry in termcap with 48 lines) 19488# the setting mark and delete-to-killbuffer results in the deletion of only 19489# the line the mark is set on. 19490# We've discovered that the delete-to-killbuffer works correctly 19491# with TERM=mod and screen set to 80x48 but it's not obvious. Only 19492# the first line disappears but a ctrl-l shows that it did work 19493# correctly. 19494modgraph48|mod|Modgraph w/48 lines, 19495 OTbs, OTpt, am, xenl, 19496 cols#80, it#8, lines#48, vt#3, 19497 OTnl=^J, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[;H\E[2J, 19498 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=^J, cuf1=\E[C, 19499 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, ed=\E[J, el=\E[K, 19500 flash=\E[?5h\E[0q\E[1;2q\E[?5l\E[0q\E[4;3q, 19501 home=\E[H, ht=^I, is2=\E<\E[1;48r\E[0q\E[3;4q\E=\E[?1h, 19502 kbs=^H, kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, 19503 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, rc=\E8, rev=\E[7m, 19504 ri=\EM, rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 19505 rs1=\E=\E[0q\E>, sc=\E7, sgr0=\E[m, smkx=\E[?1h\E=, 19506 smso=\E[7m, smul=\E[4m, 19507 19508#### Morrow Designs 19509# 19510# This was George Morrow's company. They started in the late 1970s making 19511# S100-bus machines. They used to be reachable at: 19512# 19513# Morrow 19514# 600 McCormick St. 19515# San Leandro, CA 94577 19516# 19517# but they're long gone now (1995). 19518# 19519 19520# The mt70 terminal was shipped with the Morrow MD-3 microcomputer. 19521# Jeff's specimen was dated June 1984. 19522# From: Jeff Wieland <wieland@acn.purdue.edu> 24 Feb 1995 19523mt70|mt-70|Morrow MD-70; native Morrow mode, 19524 am, mir, msgr, xon, 19525 cols#80, it#8, lines#24, 19526 acsc=+z\,{-x.yOi`|jGkFlEmDnHqJtLuKvNwMxI, bel=^G, 19527 cbt=\EI, civis=\E"0, clear=^Z, cnorm=\E"2, cr=^M, cub1=^H, 19528 cud1=^J, cuf1=^L, cup=\E=%p1%{32}%+%c%p2%{32}%+%c$<1>, 19529 cuu1=^K, dch1=\EW, dim=\EG2, dl1=\ER, ed=\EY, el=\ET$<10>, 19530 flash=\EK1$<200>\EK0, home=^^, ht=^I, ich1=\EQ, il1=\EE, 19531 ind=^J, invis@, is1=\E"2\EG0\E], kbs=^H, kcbt=^A^Z\r, 19532 kclr=^An\r, kcub1=^AL\r, kcud1=^AK\r, kcuf1=^AM\r, 19533 kcuu1=^AJ\r, kdch1=\177, kf1=^A@\r, kf10=^AI\r, kf11=^A`\r, 19534 kf12=^Aa\r, kf13=^Ab\r, kf14=^Ac\r, kf15=^Ad\r, kf16=^Ae\r, 19535 kf17=^Af\r, kf18=^Ag\r, kf19=^Ah\r, kf2=^AA\r, kf20=^Ai\r, 19536 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 19537 kf8=^AG\r, kf9=^AH\r, khlp=^AO\r, khome=^AN\r, nel=^_, 19538 rmacs=\E%%, rmcup=, smacs=\E$, smcup=\E"2\EG0\E], 19539 smul=\EG1, tbc=\E0, use=adm+sgr, 19540 19541#### Motorola 19542# 19543 19544# Motorola EXORterm 155 from {decvax, ihnp4}!philabs!sbcs!megad!seth via BRL 19545# (Seth H Zirin) 19546ex155|Motorola Exorterm 155, 19547 OTbs, am, bw, 19548 OTkn#5, OTug#1, cols#80, lines#24, 19549 cbt=\E[, clear=\EX, cub1=\ED, cud1=\EB, cuf1=\EC, 19550 cup=\EE%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, ed=\ET, 19551 el=\EU, home=\E@, ht=\EZ, kbs=^H, kcbt=\E[, kclr=\EX, kcub1=^H, 19552 kcud1=^J, kcuf1=^L, kcuu1=^K, ked=\ET, kel=\EU, khome=\E@, 19553 rmso=\Ec\ED, rmul=\Eg\ED, smso=\Eb\ED, smul=\Ef\ED, 19554 19555#### Omron 19556# 19557# This company is still around in 1995, manufacturing point-of-sale systems. 19558 19559omron|Omron 8025AG, 19560 OTbs, am, da, db, 19561 cols#80, lines#24, 19562 bel=^G, clear=\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, cuu1=\EA, 19563 cvvis=\EN, dch1=\EP, dl1=\EM, ed=\ER, el=\EK, home=\EH, 19564 il1=\EL, ind=\ES, ri=\ET, rmso=\E4, smso=\Ef, 19565 19566#### Ramtek 19567# 19568# Ramtek was a vendor of high-end graphics terminals around 1979-1983; they 19569# were competition for things like the Tektronics 4025. 19570# 19571 19572# Ramtek 6221 from BRL, probably by Doug Gwyn 19573# The following SET-UP modes are assumed for normal operation: 19574# UNDERLINE_CURSOR ANSI_MODE AUTO_XON/XOFF_ON 19575# NEWLINE_OFF 80_COLUMNS 19576# Other SET-UP modes may be set for operator convenience or communication 19577# requirements; I recommend 19578# SMOOTH_SCROLL AUTO_REPEAT_ON 3_#_SHIFTED WRAP_AROUND_ON 19579# Hardware tabs are assumed to be every 8 columns; they can be set up by the 19580# "reset", "tset", or "tabs" utilities (use rt6221-w, 160 columns, for this). 19581# Note that the Control-E key is useless on this brain-damaged terminal. No 19582# delays are specified; use "stty ixon -ixany" to enable DC3/DC1 flow control! 19583rt6221|Ramtek 6221 80x24, 19584 OTbs, OTpt, msgr, xon, 19585 OTkn#4, cols#80, it#8, lines#24, vt#3, 19586 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[>5l, 19587 clear=\E[1;1H\E[J, cnorm=\E[>5h\E[>9h, cr=^M, 19588 csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H, 19589 cud=\E[%p1%dB, cud1=^K, cuf=\E[%p1%dC, cuf1=\E[C, 19590 cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\EM, 19591 cvvis=\E[>7h\E[>9l, ed=\E[J, el=\E[K, home=\E[1;1H, ht=^I, 19592 hts=\EH, ind=^J, is2=\E)0, kbs=^H, kcub1=\E[D, kcud1=\E[B, 19593 kcuf1=\E[C, kcuu1=\E[A, kf0=\EOP, kf1=\EOQ, kf2=\EOR, 19594 kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, lf3=PF4, ll=\E[24;1H, 19595 nel=\EE, rc=\E8, rev=\E[7m, ri=\EM, rmacs=^O, rmkx=\E>, 19596 rmso=\E[m, rmul=\E[m, 19597 rs1=\E[1w\E[>37m\E[>39m\E[1v\E[20l\E[?3l\E[?6l\E[>5h\E[>6h\E[>7h\E[>8l\E[>9h\E[>10l\E[1;24r\E[m\E[q\E(B\017\E)0\E#5\E>, 19598 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E=, smso=\E[7m, 19599 smul=\E[4m, tbc=\E[3g, 19600# [TO DO: Check out: short forms of ho/cl and ll; reset (\Ec)]. 19601rt6221-w|Ramtek 6221 160x48, 19602 cols#160, lines#48, 19603 ll=\E[48;1H, use=rt6221, 19604 19605#### RCA 19606# 19607 19608# RCA VP3301 or VP3501 19609rca|rca vp3301/vp3501, 19610 OTbs, 19611 cols#40, lines#24, 19612 clear=^L, cuf1=^U, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 19613 cuu1=^K, home=^Z, rmso=\E\ES0, smso=\E\ES1, 19614 19615 19616#### Selanar 19617# 19618 19619# Selanar HiREZ-100 from BRL, probably by Doug Gwyn 19620# The following SET-UP modes are assumed for normal operation: 19621# SET_DEFAULT_TABS 48_LINES 80_COLUMNS 19622# ONLINE ANSI CURSOR_VISIBLE 19623# VT102_AUTO_WRAP_ON VT102_NEWLINE_OFF VT102_MONITOR_MODE_OFF 19624# LOCAL_ECHO_OFF US_CHAR_SET WPS_TERMINAL_DISABLED 19625# CPU_AUTO_XON/XOFF_ENABLED PRINT_FULL_SCREEN 19626# For use with graphics software, all graphics modes should be set to factory 19627# default. Other SET-UP modes may be set for operator convenience or 19628# communication requirements. No delays are specified; use "stty ixon -ixany" 19629# to enable DC3/DC1 flow control! 19630# I commented out the scrolling capabilities since they are too slow. 19631hirez100|Selanar HiREZ-100, 19632 OTbs, OTpt, mir, msgr, xon, 19633 OTkn#4, cols#80, it#8, lines#48, vt#3, 19634 acsc=, bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, 19635 cr=^M, cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 19636 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 19637 cuu=\E[%p1%dA, cuu1=\EM, dch=\E[%p1%dP, dch1=\E[P, 19638 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 19639 hts=\EH, il=\E[%p1%dL, il1=\E[L, is2=\E<\E)0, kbs=^H, 19640 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf0=\EOP, 19641 kf1=\EOQ, kf2=\EOR, kf3=\EOS, lf0=PF1, lf1=PF2, lf2=PF3, 19642 lf3=PF4, ll=\E[48H, mc0=\E[i, mc4=\E[4i\E[?4i, 19643 mc5=\E[?5i\E[5i, nel=\EE, rc=\E8, rev=\E[7m, rmacs=^O, 19644 rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m, 19645 rs1=\030\E2\E<\E[4i\E[?4i\E[12h\E[2;4;20l\E[?0;7h\E[?1;3;6;19l\E[r\E[m\E(B\017\E)0\E>, 19646 sc=\E7, sgr0=\E[m, smacs=^N, smkx=\E[?1h\E=, smso=\E[7m, 19647 smul=\E[4m, tbc=\E[3g, 19648hirez100-w|Selanar HiREZ-100 in 132-column mode, 19649 cols#132, use=hirez100, 19650 19651#### Signetics 19652# 19653 19654# From University of Wisconsin 19655vsc|Signetics Vsc Video driver by RMC, 19656 am, msgr, 19657 cols#80, it#8, lines#26, 19658 clear=\E[;H\E[2J$<50/>, cr=^M, cub1=^H, cud1=^J, cuf1=\E[C, 19659 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, el=\E[K, home=\E[H, 19660 ht=^I, ind=^J, kbs=^H, kcub1=^H, kcud1=^J, nel=^M^J, rev=^_\s, 19661 rmso=^_!, rmul=^_#, sgr0=^_!, smso=^_\s, smul=^_", 19662 19663#### Soroc 19664# 19665# Alan Frisbie <frisbie@flying-disk.com> writes: 19666# 19667# As you may recall, the Soroc logo consisted of their name, 19668# with the letter "S" superimposed over an odd design. This 19669# consisted of a circle with a slightly smaller 15 degree (approx.) 19670# wedge with rounded corners inside it. The color was sort of 19671# a metallic gold/yellow. 19672# 19673# If I had been more of a beer drinker it might have been obvious 19674# to me, but it took a clue from their service department to make 19675# me exclaim, "Of course!" The circular object was the top of 19676# a beer can (the old removable pop-top style) and "Soroc" was an 19677# anagram for "Coors". 19678# 19679# I can just imagine the founders of the company sitting around 19680# one evening, tossing back a few and trying to decide what to 19681# call their new company and what to use for a logo. 19682# 19683 19684# (soroc120: removed obsolete ":ma=^K^P^R^L^L :" -- esr) 19685soroc120|iq120|soroc|soroc iq120, 19686 clear=\E*$<2>, cud1=^J, ed=\EY, el=\ET, kcub1=^H, kcud1=^J, 19687 kcuf1=^L, kcuu1=^K, use=adm3a, 19688soroc140|iq140|soroc iq140, 19689 OTbs, am, mir, 19690 cols#80, lines#24, 19691 bel=^G, cbt=\EI, clear=\E+, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 19692 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\Ew, 19693 dl1=\Er$<.7*>, ed=\Ey, el=\Et, home=^^, il1=\Ee$<1*>, ind=^J, 19694 kbs=^H, kcuf1=^L, kcuu1=^K, kf0=^A0\r, kf1=^A@\r, kf2=^AA\r, 19695 kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, kf6=^AE\r, kf7=^AF\r, 19696 kf8=^AG\r, kf9=^AH\r, khome=^^, ll=^^^K, rmir=\E8, 19697 rmso=\E\177, rmul=\E^A, smir=\E9, smso=\E\177, smul=\E^A, 19698 19699#### Southwest Technical Products 19700# 19701# These guys made an early personal micro called the M6800. 19702# The ct82 was probably its console terminal. 19703# 19704 19705# (swtp: removed obsolete ":bc=^D:" -- esr) 19706swtp|ct82|southwest technical products ct82, 19707 am, 19708 cols#82, lines#20, 19709 bel=^G, clear=^L, cr=^M, cub1=^D, cud1=^J, cuf1=^S, 19710 cup=\013%p2%c%p1%c, cuu1=^A, dch1=^\^H, dl1=^Z, ed=^V, el=^F, 19711 home=^P, ich1=^\^X, il1=^\^Y, ind=^N, 19712 is2=\034\022\036\023\036\004\035\027\011\023\036\035\036\017\035\027\022\011, 19713 ll=^C, ri=^O, rmso=^^^F, smso=^^^V, 19714 19715#### Synertek 19716# 19717# Bob Manson <manson@pattyr.acs.ohio-state.edu> writes (28 Apr 1995): 19718# 19719# Synertek used to make ICs, various 6502-based single-board process 19720# control and hobbyist computers, and assorted peripherals including a 19721# series of small inexpensive terminals (I think they were one of the 19722# first to have a "terminal-on-a-keyboard", where the terminal itself 19723# was only slightly larger than the keyboard). 19724# 19725# They apparently had a KTM-1 model, which I've never seen. The KTM-2/40 19726# was a 40x24 terminal that could connect to a standard TV through a 19727# video modulator. The KTM-2/80 was the 80-column version (the 2/40 19728# could be upgraded to the 2/80 by adding 2 2114 SRAMs and a new ROM). 19729# I have a KTM-2/80 still in working order. The KTM-2s had fully 19730# socketed parts, used 2 6507s, a 6532 as keyboard scanner, a program 19731# ROM and 2 ROMs as character generators. They were incredibly simple, 19732# and I've never had any problems with mine (witness the fact that mine 19733# was made in 1981 and is still working great... I've blown the video 19734# output transistor a couple of times, but it's a 2N2222 :-) 19735# 19736# The KTM-3 (which is what is listed in the terminfo file) was their 19737# attempt at putting a KTM-2 in a box (and some models came with a 19738# CRT). It wasn't much different from the KTM-2 hardware-wise, but the 19739# control and escape sequences are very different. The KTM-3 was always 19740# real broken, at least according to the folks I've talked to about it. 19741# 19742# The padding in the entry is probably off--these terminals were very 19743# slow (it takes like 100ms for the KTM-2 to clear the screen...) And 19744# anyone with any sanity replaced the ROMs with something that provided 19745# a reasonable subset of VT100 functionality, since the usual ROMs were 19746# obviously very primitive... oh, you could get an upgraded ROM from 19747# Synertek for some incredible amount of money, but what hacker with an 19748# EPROM burner would do that? :) 19749# 19750# Sorry I don't have any contact info; I believe they were located in 19751# Sunnyvale, and I'm fairly sure they are still manufacturing ICs 19752# (they've gone to ASICs and FPGAs), but I doubt they're in the computer 19753# business these days. 19754# 19755 19756# Tested, seems to work fine with vi. 19757synertek|ktm|synertek380|synertek ktm 3/80 tubeless terminal, 19758 am, 19759 cols#80, lines#24, 19760 clear=^Z, cub1=^H, cuf1=^L, 19761 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK, 19762 19763#### Tab Office Products 19764# 19765# TAB Products Co. - Palo Alto, California 19766# Electronic Office Products, 19767# 1451 California Avenue 94304 19768# 19769# I think they're out of business. 19770# 19771 19772# The tab 132 uses xon/xoff, so no padding needed. 19773# <smkx>/<rmkx> have nothing to do with arrow keys. 19774# <is2> sets 80 col mode, normal video, autowrap on (for <am>). 19775# Seems to be no way to get rid of status line. 19776# The manual for this puppy was dated June 1981. It claims to be VT52- 19777# compatible but looks more vt100-like. 19778tab132|tab|tab132-15|tab 132/15, 19779 da, db, 19780 OTdN@, cols#80, lines#24, lm#96, 19781 cud1=^J, cup=\E[%i%p1%d;%p2%dH, dch1=\E[P, dl1=\E[M, 19782 il1=\E[L, is2=\E[?7h\E[?3l\E[?5l, kcub1=\E[D, kcud1=\E[B, 19783 kcuu1=\E[A, rmir=\E[4l, rmkx@, smir=\E[4h, smkx@, use=vt100, 19784tab132-w|tab132 in wide mode, 19785 cols#132, 19786 is2=\E[?7h\E[?3h\E[?5l, use=tab132, 19787tab132-rv|tab132 in reverse-video mode, 19788 is2=\E[?7h\E[?3l\E[?5h, use=tab132, 19789tab132-w-rv|tab132 in reverse-video/wide mode, 19790 is2=\E[?7h\E[?3h\E[?5h, use=tab132-w, 19791 19792 19793#### Teleray 19794# 19795# Research Incorporated 19796# 6425 Flying Cloud Drive 19797# Eden Prairie, MN 55344 19798# Vox: (612)-941-3300 19799# 19800# The Teleray terminals were all discontinued in 1992-93. RI still services 19801# and repairs these beasts, but no longer manufactures them. The Teleray 19802# people believe that all the types listed below are very rare now (1995). 19803# There was a newer line of Telerays (Model 7, Model 20, Model 30, and 19804# Model 100) that were ANSI-compatible. 19805# 19806# Note two things called "teleray". Reorder should move the common one 19807# to the front if you have either. A dumb teleray with the cursor stuck 19808# on the bottom and no obvious model number is probably a 3700. 19809# 19810 19811t3700|dumb teleray 3700, 19812 OTbs, 19813 cols#80, lines#24, 19814 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, ind=^J, 19815t3800|teleray 3800 series, 19816 OTbs, 19817 cols#80, it#8, lines#24, 19818 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 19819 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=\EJ, el=\EK, 19820 home=\EH, ht=^I, ind=^J, ll=\EY7\s, 19821t1061|teleray|teleray 1061, 19822 OTbs, am, km, xhp, xt, 19823 cols#80, it#8, lines#24, xmc#1, 19824 bel=^G, clear=\014$<1>, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 19825 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 19826 dl1=\EM$<2*>, ed=\EJ$<1>, el=\EK, home=\EH, ht=^I, hts=\EF, 19827 ich1=\EP, il1=\EL$<2*>, ind=^J, ip=$<0.4*>, 19828 is2=\Ee\EU01^Z1\EV\EU02^Z2\EV\EU03^Z3\EV\EU04^Z4\EV\EU05^Z5\EV\EU06^Z6\EV\EU07^Z7\EV\EU08^Z8\EV\Ef, 19829 kf1=^Z1, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, kf6=^Z6, kf7=^Z7, 19830 kf8=^Z8, rmso=\ER@, rmul=\ER@, smso=\s\ERD, smul=\ERH, 19831 tbc=\EG, 19832t1061f|teleray 1061 with fast PROMs, 19833 dl1=\EM, il1=\EL, ip@, use=t1061, 19834# "Teleray Arpa Special", officially designated as 19835# "Teleray Arpa network model 10" with "Special feature 720". 19836# This is the new (1981) fast microcode updating the older "arpa" proms 19837# (which gave meta-key and programmable-fxn keys). 720 is much much faster, 19838# converts the keypad to programmable function keys, and has other goodies. 19839# Standout mode is still broken (magic cookie, etc) so is suppressed as no 19840# programs handle such lossage properly. 19841# Note: this is NOT the old termcap's "t1061f with fast proms." 19842# From: J. Lepreau <lepreau@utah-cs> Tue Feb 1 06:39:37 1983, Univ of Utah 19843# (t10: removed overridden ":so@:se@:us@:ue@:" -- esr) 19844t10|teleray 10 special, 19845 OTbs, km, xhp, xt, 19846 cols#80, it#8, lines#24, xmc#2, 19847 clear=\Ej$<30/>, cub1=^H, cud1=\EB, cuf1=\EC, 19848 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EQ, 19849 dl1=\EM, ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EP, il1=\EL, 19850 ind=\Eq, pad=\0, ri=\Ep, rmso=\ER@, rmul=\ER@, smso=\ERD, 19851 smul=\ERH, 19852# teleray 16 - map the arrow keys for vi/rogue, shifted to up/down page, and 19853# back/forth words. Put the function keys (f1-f10) where they can be 19854# found, and turn off the other magic keys along the top row, except 19855# for line/local. Do the magic appropriate to make the page shifts work. 19856# Also toggle ^S/^Q for those of us who use Emacs. 19857t16|teleray 16, 19858 am, da, db, mir, xhp, xt, 19859 cols#80, lines#24, 19860 bel=^G, clear=\E[H\E[2J, cr=^M, cub1=^H, cud1=\E[B, 19861 cuf1=\E[C, cup=%i\E[%p1%d;%p2%df, cuu1=\E[A, dch1=\E[P, 19862 dl1=\E[M, ed=\E[0J, el=\E[0K, home=\E[H, ht=^I, il1=\E[L, 19863 ind=^J, kf1=^Z1, kf10=^Z0, kf2=^Z2, kf3=^Z3, kf4=^Z4, kf5=^Z5, 19864 kf6=^Z6, kf7=^Z7, kf8=^Z8, kf9=^Z9, ri=\E[T, 19865 rmcup=\E[V\E[24;1f\E[?38h, rmir=\E[4l, rmso=\E[m, 19866 rmul=\E[m, sgr0=\E[m, smcup=\E[U\E[?38l, smir=\E[4h, 19867 smso=\E[7m, smul=\E[4m, 19868 19869#### Texas Instruments (ti) 19870# 19871 19872# The Silent 700 was so called because it was built around a quiet thermal 19873# printer. It was portable, equipped with an acoustic coupler, and pretty 19874# neat for its day. 19875ti700|ti733|ti735|ti745|ti800|ti silent 700/733/735/745 or omni 800, 19876 OTbs, hc, os, 19877 cols#80, 19878 bel=^G, cr=\r$<162>, cub1=^H, cud1=^J, ind=^J, 19879 19880# 19881# Texas Instruments 916 VDT 7 bit control mode 19882# 19883ti916|ti916-220-7|Texas Instruments 916 VDT 8859/1 vt220 mode 7 bit CTRL, 19884 da, db, in, msgr, 19885 cbt=\E[Z, civis=\E[?25l, clear=\E[H\E[2J$<6>, 19886 cnorm=\E[?25h, cub=\E[%p1%dD, cud=\E[%p1%dB, 19887 cuf=\E[%p1%dC, cup=\E[%p1%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 19888 dch=\E[%p1%dP$<250>, dch1=\E[P, dl=\E[%p1%dM, 19889 ech=\E[%p1%dX$<20>, ed=\E[J$<6>, el=\E[0K, el1=\E[1K, 19890 enacs=\E(B\E)0, ff=^L, flash=\E[?5h\E[?5l$<6>, 19891 hpa=\E[%p1%{1}%+%dG, hts=\E[0W, ich=\E[%p1%d@$<250>, 19892 il=\E[%p1%dL$<36>, ip=$<10>, is2=\E[1;24r\E[24;1H, 19893 kcmd=\E[29~, kdch1=\E[P, kent=^J, kf1=\E[17~, kf10=\E[28~, 19894 kf11=\E[29~, kf12=\E[31~, kf2=\E[18~, kf3=\E[19~, 19895 kf4=\E[20~, kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, 19896 kf9=\E[26~, khome=\E[H, kich1=\E[@, knp=\E[S, kpp=\E[T, 19897 kprt=^X, prot=\E&, rmacs=\017$<2>, rs2=\E[!p, sgr@, 19898 smacs=\016$<2>, tbc=\E[3g, vpa=\E[%p1%{1}%+%dd, 19899 use=vt220, 19900# 19901# Texas Instruments 916 VDT 8 bit control mode 19902# 19903ti916-8|ti916-220-8|Texas Instruments 916 VDT 8859/1 8 vt220 mode bit CTRL, 19904 kcmd=\23329~, kcub1=\233D, kcud1=\233B, kcuf1=\233C, 19905 kcuu1=\233A, kdch1=\233P, kent=^J, kf1=\23317~, 19906 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf2=\23318~, 19907 kf3=\23319~, kf4=\23320~, kf5=\23321~, kf6=\23323~, 19908 kf7=\23324~, kf8=\23325~, kf9=\23326~, khome=\233H, 19909 kich1=\233@, knp=\233S, kpp=\233T, kprt=^X, use=ti916, 19910# 19911# Texas Instruments 916 VDT 8859/1 7 bit control 132 column mode 19912# 19913ti916-132|Texas Instruments 916 VDT vt220 132 column, 19914 cols#132, use=ti916, 19915# 19916# Texas Instruments 916 VDT 8859/1 8 bit control 132 column mode 19917# 19918ti916-8-132|Texas Instruments 916 VDT 8-bit vt220 132 column, 19919 cols#132, use=ti916-8, 19920ti924|Texas Instruments 924 VDT 8859/1 7 bit CTRL, 19921 OTbs, am, xon, 19922 cols#80, it#8, lines#24, 19923 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 19924 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, 19925 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 19926 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h, 19927 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 19928 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 19929 kcuf1=\E[C, kcuu1=\E[A, kdch1=\E[P, kf1=\EOP, kf2=\EOQ, 19930 kf3=\EOR, kf4=\EOS, kf5=\E[16~, kf6=\E[17~, kf7=\E[18~, 19931 kf8=\E[19~, kf9=\E[20~, kich1=\E[@, rc=\E8, rev=\E[7m, 19932 ri=\EM, rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, 19933 smul=\E[4m, tbc=\E[3g, 19934ti924-8|Texas Instruments 924 VDT 8859/1 8 bit CTRL, 19935 am, xon, 19936 cols#80, it#8, lines#24, 19937 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[?25l, 19938 clear=\E[2J\E[H, cnorm=\E[?25h, cr=^M, 19939 csr=%i\E[%p1%d;%p2%dr, cub1=\E[D, cud1=\E[B, cuf1=\E[C, 19940 cup=%i\E[%p1%d;%p2%dH, cuu1=\E[A, cvvis=\E[?31h, 19941 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, hts=\EH, 19942 il1=\E[L, ind=\ED, kbs=^H, kcub1=\E[D, kcud1=\E[B, 19943 kcuf1=\E[C, kcuu1=\E[A, kdch1=P$<\233>, kf1=P$<\217>, 19944 kf2=Q$<\217>, kf3=R$<\217>, kf4=S$<\217>, kf5=~$<\23316>, 19945 kf6=~$<\23317>, kf7=~$<\23318>, kf8=~$<\23319>, 19946 kf9=~$<\23320>, kich1=@$<\233>, rc=\E8, rev=\E[7m, ri=\EM, 19947 rmso=\E[m, rmul=\E[m, sc=\E7, sgr0=\E[m, smso=\E[7m, 19948 smul=\E[4m, tbc=\E[3g, 19949ti924w|Texas Instruments 924 VDT 7 bit - 132 column mode, 19950 cols#132, use=ti924, 19951ti924-8w|Texas Instruments 924 VDT 8 bit - 132 column mode, 19952 cols#132, use=ti924-8, 19953ti931|Texas Instruments 931 VDT, 19954 OTbs, am, xon, 19955 cols#80, lines#24, 19956 bel=^G, blink=\E4P, clear=\EL, cnorm=\E4@, cr=^M, cub1=\ED, 19957 cud1=\EB, cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, 19958 cuu1=\EA, dch1=\EQ, dl1=\EO, ed=\EJ, el=\EI, home=\EH, 19959 ich1=\ER\EP\EM, il1=\EN, ind=\Ea, invis=\E4H, 19960 is2=\EGB\E(@B@@\E), kcub1=\ED, kcud1=\EB, kcuf1=\EC, 19961 kcuu1=\EA, kdch1=\EQ, kdl1=\EO, kf1=\Ei1, kf2=\Ei2, kf3=\Ei3, 19962 kf4=\Ei4, kf5=\Ei5, kf6=\Ei6, kf7=\Ei7, kf8=\Ei8, kf9=\Ei9, 19963 kich1=\EP, kil1=\EN, rev=\E4B, ri=\Eb, rmso=\E4@, rmul=\E4@, 19964 sgr0=\E4@, smso=\E4A, smul=\E4D, 19965ti926|Texas Instruments 926 VDT 8859/1 7 bit CTRL, 19966 csr@, ind=\E[1S, ri=\E[1T, use=ti924, 19967# (ti926-8: I corrected this from the broken SCO entry -- esr) 19968ti926-8|Texas Instruments 926 VDT 8859/1 8 bit CTRL, 19969 csr@, ind=\2331S, ri=\2331T, use=ti924-8, 19970ti_ansi|basic entry for ti928, 19971 am, bce, eo, xenl, xon, 19972 colors#8, cols#80, it#8, lines#25, pairs#64, 19973 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, clear=\E[2J\E[H, 19974 cr=^M, csr=\E[%i%p1%d;%p2%dr, cub1=^H, cud1=\E[B, 19975 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, 19976 dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, ich1=\E[@, 19977 il1=\E[L, ind=\E[S, kbs=^H, kcub1=\E[D, kcud1=\E[B, 19978 kcuf1=\E[C, kcuu1=\E[A, kend=\E[F, kf0=\E[V, kf1=\E[M, 19979 kf2=\E[N, kf3=\E[O, kf4=\E[P, kf5=\E[Q, kf6=\E[R, kf7=\E[S, 19980 kf8=\E[T, kf9=\E[U, khome=\E[H, knp=\E[G, kpp=\E[I, 19981 op=\E[37;40m, ri=\E[T, rmso=\E[m, rmul=\E[m, 19982 setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m, 19983 smso=\E[7m, smul=\E[4m, 19984# 19985# 928 VDT 7 bit control mode 19986# 19987ti928|Texas Instruments 928 VDT 8859/1 7 bit CTRL, 19988 kdch1=\E[P, kend=\E_1\E\\, kent=\E[8~, kf1=\E[17~, 19989 kf10=\E[28~, kf11=\E[29~, kf12=\E[31~, kf13=\E[32~, 19990 kf15=\E[34~, kf2=\E[18~, kf3=\E[19~, kf4=\E[20~, 19991 kf5=\E[21~, kf6=\E[23~, kf7=\E[24~, kf8=\E[25~, kf9=\E[26~, 19992 kich1=\E[@, knp=\E[S, kpp=\E[T, kprt=\E[35~, use=ti_ansi, 19993# 19994# 928 VDT 8 bit control mode 19995# 19996ti928-8|Texas Instruments 928 VDT 8859/1 8 bit CTRL, 19997 kdch1=\233P, kend=\2371\234, kent=\2338~, kf1=\23317~, 19998 kf10=\23328~, kf11=\23329~, kf12=\23331~, kf13=\23332~, 19999 kf15=\23334~, kf2=\23318~, kf3=\23319~, kf4=\23320~, 20000 kf5=\23321~, kf6=\23323~, kf7=\23324~, kf8=\23325~, 20001 kf9=\23326~, khome=\233H, kich1=\233@, knp=\233S, 20002 kpp=\233T, kprt=\23335~, use=ti_ansi, 20003 20004#### Zentec (zen) 20005# 20006 20007# (zen30: removed obsolete :ma=^L ^R^L^K^P:. This entry originally 20008# had just <smso>=\EG6 which I think means standout was supposed to be 20009# dim-reverse using ADM12-style attributes. ADM12 <smul>/<rmul> and 20010# <invis> might work-- esr) 20011zen30|z30|zentec 30, 20012 OTbs, am, mir, ul, 20013 cols#80, lines#24, 20014 bel=^G, clear=\E*, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 20015 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, dch1=\EW, 20016 dim=\EG2, dl1=\ER$<1.5*>, ed=\EY, el=\ET$<1.0*>, home=^^, 20017 il1=\EE$<1.5*>, ind=^J, rmir=\Er, rmul@, smir=\Eq, smso=\EG6, 20018 smul@, use=adm+sgr, 20019# (zen50: this had extension capabilities 20020# :BS=^U:CL=^V:CR=^B: 20021# UK/DK/RK/LK/HM were someone's aliases for ku/kd/kl/kr/kh, 20022# which were also in the original entry -- esr) 20023# (zen50: removed obsolete ":ma=^Hh^Ll^Jj^Kk:" -- esr) 20024zen50|z50|zentec zephyr, 20025 OTbs, am, 20026 cols#80, lines#24, xmc#1, 20027 clear=\E+, cub1=^H, cup=\E=%p1%{32}%+%c%p2%{32}%+%c, 20028 cuu1=^K, dch1=\EW, dl1=\ER, ed=\EY, el=\ET, ich1=\EQ, il1=\EE, 20029 invis@, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, khome=^^, 20030 rmul@, smul@, use=adm+sgr, 20031 20032# CCI 4574 (Office Power) from Will Martin <wmartin@BRL.ARPA> via BRL 20033cci|cci1|z8001|zen8001|CCI Custom Zentec 8001, 20034 OTbs, am, bw, 20035 cols#80, lines#24, 20036 blink=\EM", clear=\EH\EJ, cnorm=\EP, 20037 csr=\ER%p1%{32}%+%c%p2%{32}%+%c, cub1=^H, cud1=^J, 20038 cuf1=\EC, cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, 20039 cvvis=\EF\EQ\EM \ER 7, dim=\EM!, ed=\EJ, el=\EK, home=\EH, 20040 invis=\EM(, is2=\EM \EF\ET\EP\ER 7, kbs=^H, kcub1=\ED, 20041 kcud1=\EB, kcuf1=\EC, kcuu1=\EA, khome=\EH, mc4=^T, mc5=^R, 20042 rev=\EM$, ri=\EI, rmso=\EM\s, rmul=\EM\s, sgr0=\EM\s, 20043 smso=\EM$, smul=\EM0, 20044 20045######## OBSOLETE UNIX CONSOLES 20046# 20047 20048#### Apollo consoles 20049# 20050# Apollo got bought by Hewlett-Packard. The Apollo workstations are 20051# labeled HP700s now. 20052# 20053 20054# From: Gary Darland <goodmanc@garnet.berkeley.edu> 20055apollo|apollo console, 20056 OTbs, am, mir, 20057 cols#88, lines#53, 20058 clear=^L, cub1=^H, cud1=\EB, cuf1=\EC, 20059 cup=\EM%p1%{32}%+%c%p2%d), cuu1=\EA, dch1=\EP, dl1=\EL, 20060 ed=\EJ, el=\EK, hpa=\EN%p1%d, il1=\EI, ind=\EE, ri=\ED, 20061 rmcup=\EX, rmir=\ER, rmso=\ET, rmul=\EV, smcup=\EW, smir=\EQ, 20062 smso=\ES, smul=\EU, vpa=\EO+\s, 20063 20064# We don't know whether or not the apollo guys replicated DEC's firmware bug 20065# in the VT132 that reversed <rmir>/<smir>. To be on the safe side, disable 20066# both these capabilities. 20067apollo_15P|apollo 15 inch display, 20068 rmir@, smir@, use=vt132, 20069apollo_19L|apollo 19 inch display, 20070 rmir@, smir@, use=vt132, 20071apollo_color|apollo color display, 20072 rmir@, smir@, use=vt132, 20073 20074#### AT&T consoles 20075 20076# This actually describes the generic SVr4 display driver for Intel boxes. 20077# The <dim=\E[2m> isn't documented and therefore may not be reliable. 20078# From: Eric Raymond <esr@snark.thyrsus.com> Mon Nov 27 19:00:53 EST 1995 20079att6386|at386|386at|AT&T WGS 6386 console, 20080 am, bw, eo, xon, 20081 cols#80, it#8, lines#25, 20082 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 20083 bel=^G, blink=\E[5m, bold=\E[1m, cbt=\E[Z, civis=\E[=C, 20084 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub=\E[%p1%dD, 20085 cub1=\E[D, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 20086 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 20087 cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, dim=\E[2m, 20088 dl=\E[%p1%dM, dl1=\E[1M, ech=\E[%p1%dX, ed=\E[J, el=\E[K, 20089 home=\E[H, hpa=\E[%i%p1%dG, ht=^I, hts=\EH, ich=\E[%p1%d@, 20090 ich1=\E[1@, il=\E[%p1%dL, il1=\E[1L, ind=\E[S, 20091 indn=\E[%p1%dS, invis=\E[9m, is2=\E[0;10;39m, kbs=^H, 20092 kcbt=^], kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 20093 kdch1=\E[P, kend=\E[Y, kf1=\EOP, kf10=\EOY, kf11=\EOZ, 20094 kf12=\EOA, kf2=\EOQ, kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, 20095 kf7=\EOV, kf8=\EOW, kf9=\EOX, khome=\E[H, kich1=\E[@, 20096 knp=\E[U, kpp=\E[V, krmir=\E0, nel=\r\E[S, rc=\E8, rev=\E[7m, 20097 ri=\E[T, rin=\E[%p1%dT, rmacs=\E[10m, rmso=\E[m, rmul=\E[m, 20098 sc=\E7, 20099 sgr=\E[10m\E[0%?%p1%p3%|%t;7%;%?%p2%t;4%;%?%p4%t;5%;%?%p5%t;2%;%?%p6%t;1%;%?%p9%t;12%e;10%;%?%p7%t;9%;m, 20100 sgr0=\E[0;10m, smacs=\E[12m, smso=\E[7m, smul=\E[4m, 20101 tbc=\E[3g, vpa=\E[%i%p1%dd, use=klone+color, 20102# (pc6300plus: removed ":KM=/usr/lib/ua/kmap.s5:"; renamed BO/EE/CI/CV -- esr) 20103pc6300plus|AT&T 6300 plus, 20104 OTbs, am, xon, 20105 cols#80, lines#24, 20106 bel=^G, blink=\E[5m, bold=\E[1m, civis=\E[=C, 20107 clear=\E[2J\E[H, cnorm=\E[=1C, cr=^M, cub1=^H, cud1=\E[B, 20108 cuf1=\E[C, cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, 20109 dch1=\E[1P, dim=\E[2m, dl1=\E[1M, ed=\E[0J, el=\E[0K, 20110 home=\E[H, hts=\EH, ich1=\E[1@, il1=\E[1L, ind=^J, 20111 invis=\E[9m, kbs=^H, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, 20112 kcuu1=\E[A, kf1=\EOc, kf10=\EOu, kf2=\EOd, kf3=\EOe, 20113 kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, kf9=\EOk, 20114 nel=^M^J, rev=\E[7m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 20115 smso=\E[7m, smul=\E[4m, tbc=\E[3g, 20116 20117# From: Benjamin C. W. Sittler <bsittler@nmt.edu> 20118# 20119# I have a UNIX PC which I use as a terminal attached to my Linux PC. 20120# Unfortunately, the UNIX PC terminfo entry that comes with ncurses 20121# is broken. All the special key sequences are broken, making it unusable 20122# with Emacs. The problem stems from the following: 20123# 20124# The UNIX PC has a plethora of keys (103 of them, and there's no numeric 20125# keypad!), loadable fonts, and strange highlighting modes ("dithered" 20126# half-intensity, "smeared" bold, and real strike-out, for example.) It also 20127# uses resizable terminal windows, but the bundled terminal program always 20128# uses an 80x24 window (and doesn't support seem to support a 132-column 20129# mode.) 20130# 20131# HISTORY: The UNIX PC was one of the first machines with a GUI, and used a 20132# library which was a superset of SVr3.5 curses (called tam, for "terminal 20133# access method".) tam includes support for real, overlapping windows, 20134# onscreen function key labels, and bitmap graphics. But since the primary 20135# user interface on the UNIX PC was a GUI program (ua, for "user 20136# assistant",) and remote administration was considered important for the 20137# machine, tam also supported VT100-compatible terminals attached to the 20138# serial port or used across the StarLan network. To simulate the extra keys 20139# not present on a VT100, users could press ESC and a two-letter sequence, 20140# such as u d (Undo) or U D (Shift-Undo.) These two-letter sequences, 20141# however, were not the same as those sent by the actual Undo key. The 20142# actual Undo key sends ESC 0 s unshifted, and ESC 0 S shifted, for example. 20143# (If you're interested in adding some of the tam calls to ncurses, btw, I 20144# have the full documentation and several programs which use tam. It also 20145# used an extended terminfo format to describe key sequences, special 20146# highlighting modes, etc.) 20147# 20148# KEYS: This means that ncurses would quite painful on the UNIX PC, since 20149# there are two sequences for every key-modifier combination (local keyboard 20150# sequence and remote "VT100" sequence.) But I doubt many people are trying 20151# to use ncurses on the UNIX PC, since ncurses doesn't properly handle the 20152# GUI. Unfortunately, the terminfo entry (and the termcap, too, I presume) 20153# seem to have been built from the manual describing the VT100 sequences. 20154# This means it doesn't work for a real live UNIX PC. 20155# 20156# FONTS: The UNIX PC also has a strange interpretation of "alternate 20157# character set". Rather than the VT100 graphics you might expect, it allows 20158# up to 8 custom fonts to be loaded at any given time. This means that 20159# programs expecting VT100 graphics will usually be disappointed. For this 20160# reason I have disabled the smacs/rmacs sequences, but they could easily be 20161# re-enabled. Here are the relevant control sequences (from the ESCAPE(7) 20162# manpage), should you wish to do so: 20163# 20164# SGR10 - Select font 0 - ESC [ 10 m or SO 20165# SGR11 - Select font 1 - ESC [ 11 m or SI 20166# SGR12 - Select font 2 - ESC [ 12 m 20167# ... (etc.) 20168# SGR17 - Select font 7 - ESC [ 17 m 20169# 20170# Graphics for line drawing are not reliably found at *any* character 20171# location because the UNIX PC has dynamically reloadable fonts. I use font 20172# 0 for regular text and font 1 for italics, but this is by no means 20173# universal. So ASCII line drawing is in order if smacs/rmacs are enabled. 20174# 20175# MISC: The cursor visible/cursor invisible sequences were swapped in the 20176# distributed terminfo. 20177# 20178# To ameliorate these problems (and fix a few highlighting bugs) I rewrote 20179# the UNIX PC terminfo entry. The modified version works great with Lynx, 20180# Emacs, and XEmacs running on my Linux PC and displaying on the UNIX PC 20181# attached by serial cable. In Emacs, even the Undo key works, and many 20182# applications can now use the F1-F8 keys. 20183# 20184# esr's notes: 20185# Terminfo entry for the AT&T Unix PC 7300 20186# from escape(7) in Unix PC 7300 Manual. 20187# Somewhat similar to a vt100-am (but different enough 20188# to redo this from scratch.) 20189# 20190# /*************************************************************** 20191# * 20192# * FONT LOADING PROGRAM FOR THE UNIX PC 20193# * 20194# * This routine loads a font defined in the file ALTFONT 20195# * into font memory slot #1. Once the font has been loaded, 20196# * it can be used as an alternative character set. 20197# * 20198# * The call to ioctl with the argument WIOCLFONT is the key 20199# * to this routine. For more information, see window(7) in 20200# * the PC 7300 documentation. 20201# ***************************************************************/ 20202# #include <string.h> /* needed for strcpy call */ 20203# #include <sys/window.h> /* needed for ioctl call */ 20204# #define FNSIZE 60 /* font name size */ 20205# #define ALTFONT "/usr/lib/wfont/special.8.ft" /* font file */ 20206# /* 20207# * The file /usr/lib/wfont/special.8.ft comes with the 20208# * standard PC software. It defines a graphics character set 20209# * similar to that of the Teletype 5425 terminal. To view 20210# * this or other fonts in /usr/lib/wfont, use the command 20211# * cfont <filename>. For further information on fonts see 20212# * cfont(1) in the PC 7300 documentation. 20213# */ 20214# 20215# struct altfdata /* structure for alt font data */ 20216# { 20217# short altf_slot; /* memory slot number */ 20218# char altf_name[FNSIZE]; /* font name (file name) */ 20219# }; 20220# ldfont() 20221# { 20222# int wd; /* window in which altfont will be */ 20223# struct altfdata altf; 20224# altf.altf_slot=1; 20225# strcpy(altf.altf_name,ALTFONT); 20226# for (wd =1; wd < 12; wd++) { 20227# ioctl(wd, WIOCLFONT,&altf); 20228# } 20229# } 20230# 20231# (att7300: added <civis>/<cnorm>/<ich1>/<invis> from the BSDI entry, 20232# they're confirmed by the man page for the System V display---esr) 20233# 20234att7300|unixpc|pc7300|3b1|s4|AT&T UNIX PC Model 7300, 20235 am, xon, 20236 cols#80, it#8, lines#24, 20237 bel=^G, blink=\E[9m, bold=\E[1m, cbt=\E^I, civis=\E[=1C, 20238 clear=\E[2J\E[H, cnorm=\E[=0C, cr=^M, cub=\E[%p1%dD, 20239 cub1=^H, cud=\E[%p1%dB, cud1=\E[B, cuf=\E[%p1%dC, 20240 cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, 20241 cuu1=\E[A, dch1=\E[P, dim=\E[2m, dl=\E[%p1%dM, dl1=\E[M, 20242 ed=\E[0J, el=\E[0K, home=\E[H, ich1=\E[@, il=\E[%p1%dL, 20243 il1=\E[L, ind=^J, invis=\E[9m, is1=\017\E[=1w, kBEG=\ENB, 20244 kCAN=\EOW, kCPY=\END, kCRT=\EON, kDC=\ENF, kDL=\ENE, 20245 kEND=\ENN, kEOL=\EOA, kFND=\EOX, kHLP=\EOM, kHOM=\ENM, 20246 kIC=\ENJ, kLFT=\ENK, kMOV=\ENC, kNXT=\ENH, kOPT=\EOR, 20247 kPRV=\ENG, kRDO=\EOT, kRIT=\ENL, kRPL=\EOY, kSAV=\EOO, 20248 kUND=\EOS, kbeg=\ENb, kbs=^H, kcan=\EOw, kcbt=\E[Z, 20249 kclo=\EOV, kclr=\E[J, kcmd=\EOu, kcpy=\ENd, kcrt=\EOn, 20250 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kdch1=\ENf, 20251 ked=\E[J, kel=\EOa, kend=\E0, kext=\EOk, kf1=\EOc, kf2=\EOd, 20252 kf3=\EOe, kf4=\EOf, kf5=\EOg, kf6=\EOh, kf7=\EOi, kf8=\EOj, 20253 kfnd=\EOx, khlp=\EOm, khome=\E[H, kich1=\ENj, kind=\E[B, 20254 kmov=\ENc, kmrk=\ENi, knp=\E[U, knxt=\ENh, kopn=\EOv, 20255 kopt=\EOr, kpp=\E[V, kprt=\EOz, kprv=\ENg, krdo=\EOt, 20256 kref=\EOb, krfr=\ENa, kri=\E[A, krpl=\EOy, krst=\EOB, 20257 ksav=\EOo, kslt=\ENI, kund=\EOs, nel=\EE, rev=\E[7m, ri=\EM, 20258 rmso=\E[m, rmul=\E[m, sgr0=\E[0;10m, smso=\E[7m, 20259 smul=\E[4m, 20260 20261#### Convergent Technology 20262# 20263# Burroughs bought Convergent shortly before it merged with Univac. 20264# CTOS is (I believe) dead. Probably the aws is too (this entry dates 20265# from 1991 or earlier). 20266# 20267 20268# Convergent AWS workstation from Gould/SEL UTX/32 via BRL 20269# (aws: removed unknown :dn=^K: -- esr) 20270aws|Convergent Technologies AWS workstation under UTX and Xenix, 20271 am, 20272 OTug#0, cols#80, lines#28, xmc#0, 20273 OTbc=^H, OTma=\016h\013j\001k\022l\002m, OTnl=^J, acsc=, 20274 clear=^L, cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, 20275 dch1=\EDC, dl1=\EDL, ed=\EEF, el=\EEL, hpa=\EH%p1%c, 20276 ich1=\EIC, il1=\EIL, ind=\ESU, kbs=^H, kcub1=^N, kcud1=^K, 20277 kcuf1=^R, kcuu1=^A, ri=\ESD, rmacs=\EAAF, rmso=\EARF, 20278 rmul=\EAUF, smacs=\EAAN, smso=\EARN, smul=\EAUN, 20279 vpa=\EV%p1%c, 20280awsc|Convergent Technologies AWS workstation under CTOS, 20281 am, 20282 OTug#0, cols#80, lines#24, xmc#0, 20283 OTbc=^N, OTma=\016h\013j\001k\022l\002m, acsc=, clear=^L, 20284 cud1=^K, cuf1=^R, cup=\EC%p2%c%p1%c, cuu1=^A, ed=\EEF, 20285 el=\EEL, kbs=^H, kcub1=^N, kcud1=^K, kcuf1=^R, kcuu1=^A, 20286 rmacs=\EAAF, rmso=\EAA, rmul=\EAA, smacs=\EAAN, smso=\EAE, 20287 smul=\EAC, 20288 20289#### DEC consoles 20290# 20291 20292# The MicroVax console. Tim Theisen <tim@cs.wisc.edu> writes: 20293# The digital uVax II's had a graphic display called a qdss. It was 20294# supposed to be a high performance graphic accelerator, but it was 20295# late to market and barely appeared before faster dumb frame buffers 20296# appeared. I have only used this display while running X11. However, 20297# during bootup, it was in text mode, and probably had a terminal emulator 20298# within it. And that is what your termcap entry is for. In graphics 20299# mode the screen size is 1024x864 pixels. 20300qdss|qdcons|qdss glass tty, 20301 OTbs, am, 20302 cols#128, lines#57, 20303 clear=\032$<1/>, cub1=^H, cud1=^J, cuf1=^L, 20304 cup=\E=%p1%c%p2%c, cuu1=^K, 20305 20306#### Fortune Systems consoles 20307# 20308# Fortune made a line of 68K-based UNIX boxes that were pretty nifty 20309# in their day; I (esr) used one myself for a year or so around 1984. 20310# They had no graphics, though, and couldn't compete against Suns and 20311# the like. R.I.P. 20312# 20313 20314# From: Robert Nathanson <c160-3bp@Coral> via tut Wed Oct 5, 1983 20315# (This had extension capabilities 20316# :rv=\EH:re=\EI:rg=0:GG=0:\ 20317# :CO=\E\\:WL=^Aa\r:WR=^Ab\r:CL=^Ac\r:CR=^Ad\r:DL=^Ae\r:RF=^Af\r:\ 20318# :RC=^Ag\r:CW=^Ah\r:NU=^Aj\r:EN=^Ak\r:HM=^Al:PL=^Am\r:\ 20319# :PU=^An\r:PD=^Ao\r:PR=^Ap\r:HP=^A@\r:RT=^Aq\r:TB=\r:CN=\177:MP=\E+F: 20320# It had both ":bs:" and ":bs=^H:"; I removed the latter. Also, it had 20321# ":sg=0:" and ":ug=0:"; evidently the composer was trying (unnecessarily) 20322# to force both magic cookie glitches off. Once upon a time, I 20323# used a Fortune myself, so I know the capabilities of the form ^A[a-z]\r are 20324# function keys; thus the "Al" value for HM was certainly an error. I renamed 20325# EN/PD/PU/CO/CF/RT according to the XENIX/TC mappings, but not HM/DL/RF/RC. 20326# I think :rv: and :re: are start/end reverse video and :rg: is a nonexistent 20327# "reverse-video-glitch" capability; I have put :rv: and :re: in with standard 20328# names below. I've removed obsolete ":nl=5^J:" as there is a :do: -- esr) 20329fos|fortune|Fortune system, 20330 OTbs, am, bw, 20331 cols#80, lines#25, 20332 acsc=j*k(l m"q&v%w#x-, bel=^G, blink=\EN, civis=\E], 20333 clear=\014$<20>, cnorm=\E\\, cr=^M, cub1=^H, cud1=\n$<3>, 20334 cup=\034C%p1%{32}%+%c%p2%{32}%+%c, cuu1=\013$<3>, 20335 cvvis=\E\:, dch1=\034W$<5>, dl1=\034R$<15>, 20336 ed=\034Y$<3*>, el=^\Z, home=\036$<10>, ht=^Z, 20337 ich1=\034Q$<5>, il1=\034E$<15>, ind=^J, is2=^_.., kbs=^H, 20338 kcub1=^Aw\r, kcud1=^Ay\r, kcuf1=^Az\r, kcuu1=^Ax\r, 20339 kend=^Ak\r, kent=^Aq, kf1=^Aa\r, kf2=^Ab\r, kf3=^Ac\r, 20340 kf4=^Ad\r, kf5=^Ae\r, kf6=^Af\r, kf7=^Ag\r, kf8=^Ah\r, 20341 khome=^A?\r, knp=^Ao\r, kpp=^An\r, nel=^M^J, rev=\EH, 20342 rmacs=^O, rmso=^\I`, rmul=^\IP, sgr0=\EI, smacs=\Eo, 20343 smso=^\H`, smul=^\HP, 20344 20345#### Masscomp consoles 20346# 20347# Masscomp has gone out of business. Their product line was purchased by 20348# comany in Georgia (US) called "XS International", parts and service may 20349# still be available through them. 20350# 20351 20352# (masscomp: ":MT:" changed to ":km:"; -- esr) 20353masscomp|masscomp workstation console, 20354 OTbs, km, mir, 20355 cols#80, it#8, lines#24, 20356 clear=\E[2J, cub1=^H, cud1=\E[B, cuf1=\E[C, 20357 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 20358 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, is2=\EGc\EGb\EGw, kbs=^H, 20359 kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, rmir=\E[4l, 20360 rmso=\E[m, rmul=\EGau, smir=\E[4h, smso=\E[7m, smul=\EGu, 20361masscomp1|masscomp large screen version 1, 20362 cols#104, lines#36, use=masscomp, 20363masscomp2|masscomp large screen version 2, 20364 cols#64, lines#21, use=masscomp, 20365 20366#### OSF Unix 20367# 20368 20369# OSF/1 1.1 Snapshot 2 20370pmcons|pmconsole|PMAX console, 20371 am, 20372 cols#128, lines#57, 20373 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuu1=^K, ht=^I, 20374 ind=^J, kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, 20375 kf1=\EOP, kf2=\EOQ, kf3=\EOR, kf4=\EOS, 20376 20377#### Other consoles 20378# The following is a version of the ibm-pc entry distributed with PC/IX, 20379# (Interactive Systems' System 3 for the Big Blue), modified by Richard 20380# McIntosh at UCB/CSM. The :pt: and :uc: have been removed from the original, 20381# (the former is untrue, and the latter failed under UCB/man); standout and 20382# underline modes have been added. Note: this entry describes the "native" 20383# capabilities of the PC monochrome display, without ANY emulation; most 20384# communications packages (but NOT PC/IX connect) do some kind of emulation. 20385pcix|PC/IX console, 20386 am, bw, eo, 20387 cols#80, lines#24, 20388 clear=\Ec, cub1=^H, cud1=\E[B, cuf1=\E[C, 20389 cup=\E[%i%p1%2d;%p2%2dH, cuu1=\E[A, ed=\E[J, el=\E[K, 20390 home=\E[H, rmso=\E[m, rmul=\E[m, sgr0=\E[m, smso=\E[7m, 20391 smul=\E[4m, 20392 20393# (ibmpcx: this entry used to be known as ibmx. 20394# It formerly included the following extension capabilities: 20395# :GC=b:GL=v:GR=t:RT=^J:\ 20396# :GH=\E[196g:GV=\E[179g:\ 20397# :GU=\E[193g:GD=\E[194g:\ 20398# :G1=\E[191g:G2=\E[218g:G3=\E[192g:G4=\E[217g:\ 20399# :CW=\E[E:NU=\E[F:RF=\E[G:RC=\E[H:\ 20400# :WL=\E[K:WR=\E[L:CL=\E[M:CR=\E[N:\ 20401# I renamed GS/GE/WL/WR/CL/CR/PU/PD/HM/EN; also, removed a duplicate 20402# ":kh=\E[Y:". Added IBM-PC forms characters and highlights, they match 20403# what was there before. -- esr) 20404ibmpcx|xenix|ibmx|IBM PC xenix console display, 20405 OTbs, am, msgr, 20406 cols#80, lines#25, 20407 clear=^L, cub1=^H, cud1=\E[B, cuf1=\E[C, 20408 cup=\E[%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 20409 ed=\E[J, el=\E[K, home=\E[H, ich1=\E[@, il1=\E[L, kbs=^H, 20410 kcub1=\E[D, kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kend=\E[d, 20411 kf1=\E[K, kf2=\E[L, kf3=\E[M, kf4=\E[N, khome=\E[Y, knp=\E[e, 20412 kpp=\E[Z, use=klone+acs, use=klone+sgr8, 20413 20414######## OTHER OBSOLETE TYPES 20415# 20416# These terminals are *long* dead -- these entries are retained for 20417# historical interest only. 20418# 20419 20420#### Obsolete non-ANSI software emulations 20421# 20422 20423# CTRM terminal emulator 20424# 1. underlining is not allowed with colors: first, is is simulated by 20425# black on white, second, it disables background color manipulations. 20426# 2. BLINKING, REVERSE and BOLD are allowed with colors, 20427# so we have to save their status in the static registers A, B and H 20428# respectively, to be able to restore them when color changes 20429# (because any color change turns off ALL attributes) 20430# 3. <bold> and <rev> sequences alternate modes, 20431# rather than simply entering them. Thus we have to check the 20432# static register B and H to determine the status, before sending the 20433# escape sequence. 20434# 4. <sgr0> now must set the status of all 3 register (A,B,H) to zero 20435# and then reset colors 20436# 5. implementation of the protect mode would badly penalize the performance. 20437# we would have to use \E&bn sequence to turn off colors (as well as all 20438# other attributes), and keep the status of protect mode in yet another 20439# static variable. If someone really needs this mode, they would have to 20440# create another terminfo entry. 20441# 6. original color-pair is white on black. 20442# store the information about colors into static registers 20443# 7. set foreground color. it performs the following steps. 20444# 1) turn off all attributes 20445# 2) turn on the background and video attributes that have been turned 20446# on before (this information is stored in static registers X,Y,Z,A,B,H,D). 20447# 3) turn on foreground attributes 20448# 4) store information about foreground into U,V,W static registers 20449# 8. turn on background: similar to turn on foreground above 20450ctrm|C terminal emulator, 20451 am, bce, xon, 20452 colors#8, cols#80, lh#0, lines#24, lm#0, lw#0, ncv#2, nlab#0, 20453 pairs#63, pb#19200, vt#6, 20454 bel=^G, blink=\E&dA%{1}%PA, 20455 bold=%?%gH%{0}%=%t\E&dH%{1}%PH%;, cbt=\Ei, 20456 clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 20457 cup=\E&a%p2%dc%p1%dY, cuu1=\EA, dch1=\EP$<2>, dl1=\EM, 20458 ed=\EJ, el=\EK, hpa=\E&a%p1%dC, ht=\011$<2>, hts=\E1, 20459 il1=\EL, ind=^J, ip=$<2>, is2=\E&jA\r, kbs=^H, kcub1=\Eu\r, 20460 kcud1=\Ew\r, kcuf1=\Ev\r, kcuu1=\Et\r, kf1=\Ep\r, 20461 kf2=\Eq\r, kf3=\Er\r, kf4=\Es\r, kf5=\Et\r, kf6=\Eu\r, 20462 kf7=\Ev\r, kf8=\Ew\r, khome=\Ep\r, 20463 op=\E&bn\E&bB\E&bG\E&bR%{0}%PX%{0}%PY%{0}%PZ%{1}%PW%{1}%PV%{1}%PU, 20464 rev=%?%gB%{0}%=%t\E&dB%{1}%PB%;, rmir=\ER, rmkx=\E&jA, 20465 setb=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gU%t\E&bR%;%?%gV%t\E&bG%;%?%gW%t\E&bB%;%?%p1%{1}%&%t\E&bb%{1}%e%{0}%;%PZ%?%p1%{2}%&%t\E&bg%{1}%e%{0}%;%PY%?%p1%{4}%&%t\E&br%{1}%e%{0}%;%PX, 20466 setf=\E&bn%?%gA%t\E&dA%;%?%gB%t\E&dB%;%?%gH%t\E&dH%;%?%gX%t\E&br%;%?%gY%t\E&bg%;%?%gZ%t\E&bb%;%?%p1%{1}%&%t\E&bB%{1}%e%{0}%;%PW%?%p1%{2}%&%t\E&bG%{1}%e%{0}%;%PV%?%p1%{4}%&%t\E&bR%{1}%e%{0}%;%PU, 20467 sgr=\E&d@%{0}%PA%{0}%PB%{0}%PD%{0}%PH%?%p1%p3%p5%|%|%t\E&dB%{1}%PB%;%?%p4%t\E&dA%{1}%PA%;%?%p6%t\E&dH%{1}%PH%;%?%p2%t\E&dD%;, 20468 sgr0=\E&d@%{0}%PA%{0}%PB%{0}%PH, smir=\EQ, smkx=\E&jB, 20469 smso=\E&dD, smul=\E&dD, tbc=\E3, vpa=\E&a%p1%dY, 20470 20471# gs6300 - can't use blue foreground, it clashes with underline; 20472# it's simulated with cyan 20473# Bug: The <op> capability probably resets attributes. 20474# (gs6300: commented out <rmln> (no <smln>) --esr) 20475gs6300|emots|AT&T PC6300 with EMOTS terminal emulator, 20476 am, bce, msgr, xon, 20477 colors#8, cols#80, it#8, lines#24, pairs#63, 20478 acsc=++\,\,--..``aaffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 20479 bel=^G, blink=\E[5m, bold=\E[1m, clear=\E[H\E[J, cr=^M, 20480 cub=\E[%p1%dD, cub1=^H, cud=\E[%p1%dB, cud1=^J, 20481 cuf=\E[%p1%dC, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, 20482 cuu=\E[%p1%dA, cuu1=\E[A, dch=\E[%p1%dP, dch1=\E[P, 20483 dl=\E[%p1%dM, dl1=\E[M, ed=\E[J, el=\E[K, home=\E[H, ht=^I, 20484 ich=\E[%p1%d@, ich1=\E[@, il=\E[%p1%dL, il1=\E[L, ind=^J, 20485 is2=\E[m, kbs=^H, kcbt=^R^I, kcub1=\E[D, kcud1=\E[B, 20486 kcuf1=\E[C, kcuu1=\E[A, kf1=\E[0s, kf2=\E[24s, kf3=\E[1s, 20487 kf4=\E[23s, kf5=\E[2s, kf6=\E[22s, kf7=\E[3s, kf8=\E[21s, 20488 khome=\E[H, mc4=\E[4i, mc5=\E[5i, op=\E[?;m, rev=\E[7m, 20489 ri=\E[L, rmacs=\E[10m, rs1=\Ec, setb=\E[?;%p1%dm, 20490 setf=\E[?%?%p1%{0}%=%t0%e%p1%{1}%=%t2%e%p1%{1}%-%d%;m, 20491 sgr0=\E[m\E[10m, smacs=\E[11m, smso=\E[1m, smul=\E[4m, 20492 20493# From: <earle@smeagol.UUCP> 29 Oct 85 05:40:18 GMT 20494# MS-Kermit with Heath-19 emulation mode enabled 20495# (h19k: changed ":pt@:" to ":it@" 20496h19k|h19kermit|heathkit emulation provided by Kermit (no auto margin), 20497 am@, da, db, xt, 20498 it@, 20499 ht@, use=h19-u, 20500 20501# Apple Macintosh with Versaterm, a terminal emulator distributed by Synergy 20502# Software (formerly Peripherals Computers & Supplies, Inc) of 20503# 2457 Perkiomen Ave., Reading, PA 19606, 1-800-876-8376. They can 20504# also be reached at support@synergy.com. 20505versaterm|versaterm vt100 emulator for the macintosh, 20506 am, xenl, 20507 cols#80, it#8, lines#24, 20508 bel=^G, blink=\E[5m$<2/>, bold=\E[1m$<2/>, 20509 clear=\E[;H\E[2J$<50/>, cr=^M, csr=\E[%i%p1%d;%p2%dr, 20510 cub1=^H, cud1=^J, cuf1=\E[C$<2/>, 20511 cup=\E[%i%p1%d;%p2%dH$<5/>, cuu1=\E[A$<2/>, 20512 dch1=\E[1P$<7/>, dl1=\E[1M$<9/>, ed=\E[J$<50/>, 20513 el=\E[K$<3/>, home=\E[H, ht=^I, ich1=\E[1@$<7/>, 20514 il1=\E[1L$<9/>, is2=\E[1;24r\E[24;1H, kbs=^H, kcub1=\EOD, 20515 kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA, kf1=\EOP, kf2=\EOQ, 20516 kf3=\EOR, kf4=\EOS, nel=^M^J, rc=\E8, rev=\E[7m$<2/>, 20517 rf=/usr/share/tabset/vt100, ri=\EM$<5/>, 20518 rmkx=\E>\E[?1l, rmso=\E[m$<2/>, rmul=\E[m$<2/>, rs1=\E>, 20519 sc=\E7, sgr0=\E[m$<2/>, smkx=\E=\E[?1h, smso=\E[7m$<2/>, 20520 smul=\E[4m$<2/>, 20521 20522# From: Rick Thomas <ihnp4!btlunix!rbt> 20523# (xtalk: I added <rmam>/<smam> based on the init string. 20524xtalk|IBM PC with xtalk communication program (versions up to 3.4), 20525 am, mir, msgr, xon, 20526 cols#80, it#8, lines#24, vt#3, xmc#1, 20527 acsc=``aaffggjjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~, 20528 bel=^G, clear=\E[H\E[J$<50>, cr=^M, cub=\E[%p1%dD, cub1=^H, 20529 cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C$<2>, 20530 cup=\E[%i%p1%d;%p2%dH$<5>, cuu=\E[%p1%dA, 20531 cuu1=\E[A$<2>, dl1=\E[M$<99>, ed=\E[J$<50>, el=\E[K$<3>, 20532 el1=\E[1K$<3>, enacs=\E(B\E)0, home=\E[H, ht=^I, hts=\EH, 20533 il1=\E[L$<99>, ind=^J, kbs=^H, kcub1=\EOD, kcud1=\EOB, 20534 kcuf1=\EOC, kcuu1=\EOA, ri=\EM$<5>, rmacs=^O, rmam=\E[?7l, 20535 rmkx=\E[?1l\E>, rmso=\E[m\s, 20536 rs2=\E>\E[?3l\E[?4l\E[?5l\E[?7h\E[?8h, sgr0=\E[m, 20537 smacs=^N, smam=\E[?7h, smkx=\E[?1h\E=, smso=\E[7m\s, 20538 tbc=\E[3g, use=vt100+fnkeys, 20539 20540# The official PC terminal emulator program of the AT&T Product Centers. 20541# Note - insert mode commented out - doesn't seem to work on AT&T PC. 20542simterm|attpc running simterm, 20543 am, 20544 cols#80, lines#24, 20545 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=\EB, cuf1=\EC, 20546 cup=\E=%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\ER, 20547 dl1=\EM, ed=\EJ, el=\EK, home=\EH, il1=\EL, ind=^J, rmcup=\EVE, 20548 rmso=\E&d@, sgr0=\E&d@, smcup=\EVS, smso=\E&dB, 20549 20550#### Daisy wheel printers 20551# 20552# This section collects Diablo, DTC, Xerox, Qume, and other daisy 20553# wheel terminals. These are now largely obsolete. 20554# 20555 20556# (diablo1620: removed <if=/usr/share/tabset/xerox1720>, no such file -- esr) 20557diablo1620|diablo1720|diablo450|ipsi|diablo 1620, 20558 hc, os, 20559 cols#132, it#8, 20560 cub1=^H, cud1=^J, cuu1=\E^J, hd=\ED, hpa=\E\011%i%p1%c, 20561 ht=^I, hts=\E1, hu=\EU, kbs=^H, tbc=\E2, 20562diablo1620-m8|diablo1640-m8|diablo 1620 w/8 column left margin, 20563 cols#124, 20564 is2=\r \E9, use=diablo1620, 20565# (diablo1640: removed <if=/usr/share/tabset/xerox1730>, no such file -- esr) 20566diablo1640|diablo1730|diablo1740|diablo630|x1700|diablo|xerox|diablo 1640, 20567 bel=^G, rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, 20568 use=diablo1620, 20569# (diablo1640-lm: removed <if=/usr/share/tabset/xerox1730-lm>, no such 20570# file -- esr) 20571diablo1640-lm|diablo-lm|xerox-lm|diablo 1640 with indented left margin, 20572 cols#124, 20573 rmso=\E&, rmul=\ER, smso=\EW, smul=\EE, use=diablo1620, 20574diablo1740-lm|630-lm|1730-lm|x1700-lm|diablo 1740 printer, 20575 use=diablo1640-lm, 20576# DTC 382 with VDU. Has no <ed> so we fake it with <el>. Standout 20577# <smso=^P\s\002^PF> works but won't go away without dynamite <rmso=^P\s\0>. 20578# The terminal has tabs, but I'm getting tired of fighting the braindamage. 20579# If no tab is set or the terminal's in a bad mood, it glitches the screen 20580# around all of memory. Note that return puts a blank ("a return character") 20581# in the space the cursor was at, so we use ^P return (and thus ^P newline for 20582# newline). Note also that if you turn off :pt: and let Unix expand tabs, 20583# curses won't work (some old BSD versions) because it doesn't clear this bit, 20584# and cursor addressing sends a tab for row/column 9. What a losing terminal! 20585# I have been unable to get tabs set in all 96 lines - it always leaves at 20586# least one line with no tabs in it, and once you tab through that line, 20587# it completely weirds out. 20588# (dtc382: change <rmcup> to <smcup> -- it just does a clear --esr) 20589dtc382|DTC 382, 20590 am, da, db, xhp, 20591 cols#80, lines#24, lm#96, 20592 bel=^G, clear=\020\035$<20>, cnorm=^Pb, cr=^P^M, cub1=^H, 20593 cuf1=^PR, cup=\020\021%p2%c%p1%c, cuu1=^P^L, cvvis=^PB, 20594 dch1=^X, dl1=^P^S, ed=\020\025\020\023\020\023, el=^P^U, 20595 home=^P^R, il1=^P^Z, ind=^J, pad=\177, rmcup=, rmir=^Pi, 20596 rmul=^P \0, smcup=\020\035$<20>, smir=^PI, smul=^P ^P, 20597dtc300s|DTC 300s, 20598 hc, os, 20599 cols#132, 20600 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I, 20601 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3, 20602gsi|mystery gsi terminal, 20603 hc, os, 20604 cols#132, 20605 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, hd=\Eh, ht=^I, hu=\EH, 20606 ind=^J, 20607aj830|aj832|aj|anderson jacobson, 20608 hc, os, 20609 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E7, hd=\E9, hu=\E8, 20610 ind=^J, 20611# From: Chris Torek <chris@gyre.umd.edu> Thu, 7 Nov 85 18:21:58 EST 20612aj510|Anderson-Jacobson model 510, 20613 am, mir, 20614 cols#80, lines#24, 20615 clear=^L, cub1=^H, cuf1=\EX, 20616 cup=\E#%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EY, 20617 dch1=.1*\E'D, dl1=\E&D$<2*/>, ed=\E'P, el=\E'L, ich1=, 20618 il1=\E&I$<2*/>, ip=$<.1*/>, kcub1=\EW, kcud1=\EZ, 20619 kcuf1=\EX, kcuu1=\EY, pad=\177, rmcup=\E"N, rmir=\E'J, 20620 rmso=\E"I, rmul=\E"U, smcup=\E"N, smir=\E'I, smso=\E"I, 20621 smul=\E"U, 20622# From: <cbosg!ucbvax!pur-ee!cincy!chris> Thu Aug 20 09:09:18 1981 20623# This is incomplete, but it's a start. 20624nec5520|nec|spinwriter|nec 5520, 20625 hc, os, 20626 cols#132, it#8, 20627 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=\E9, ff=^L, 20628 hd=\E]s\n\E]W, ht=^I, hts=\E1, hu=\E]s\E9\E]W, ind=^J, 20629 kbs=^H, tbc=\E3, 20630qume5|qume|Qume Sprint 5, 20631 hc, os, 20632 cols#80, it#8, 20633 bel=^G, cr=^M, cub1=^H, cud1=^J, cuu1=^Z, ff=^L, hd=\Eh, ht=^I, 20634 hts=\E1, hu=\EH, ind=^J, kbs=^H, tbc=\E3, 20635# I suspect the xerox 1720 is the same as the diablo 1620. 20636xerox1720|x1720|x1750|xerox 1720, 20637 hc, os, 20638 cols#132, it#8, 20639 bel=^G, cr=^M, cub1=^H, cud1=^J, ff=^L, ht=^I, hts=\E1, ind=^J, 20640 tbc=\E2, 20641 20642#### Miscellaneous obsolete terminals, manufacturers unknown 20643# 20644# If you have any information about these (like, a manufacturer's name, 20645# and a date on the serial-number plate) please send it! 20646 20647cad68-3|cgc3|cad68 basic monitor transparent mode size 3 chars, 20648 OTbs, am, 20649 cols#73, lines#36, 20650 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, 20651cad68-2|cgc2|cad68 basic monitor transparent mode size 2 chars, 20652 OTbs, am, 20653 cols#85, lines#39, 20654 clear=^Z, cub1=^H, cuf1=^L, cuu1=^K, home=^^, kcub1=\E3, 20655 kcud1=\E2, kcuf1=\E4, kcuu1=\E1, kf1=\E5, kf2=\E6, kf3=\E7, 20656 kf4=\E8, rmso=\Em^C, smso=\Em^L, 20657cops10|cops|cops-10|cops 10, 20658 am, bw, 20659 cols#80, lines#24, 20660 bel=^G, clear=\030$<30/>, cr=^M, cub1=^H, cud1=^J, cuf1=^L, 20661 cup=\020%p1%{32}%+%c%p2%{32}%+%c, cuu1=^K, ed=^W, el=^V, 20662 ind=^J, kbs=^H, kcub1=^H, kcud1=^J, kcuf1=^L, kcuu1=^K, 20663 khome=^Y, 20664# (d132: removed duplicate :ic=\E5:, 20665# merged in capabilities from a BRL entry -- esr) 20666d132|datagraphix|datagraphix 132a, 20667 da, db, in, 20668 cols#80, lines#30, 20669 bel=^G, clear=^L, cnorm=\Em\En, cr=^M, cub1=^H, cud1=^J, 20670 cuf1=\EL, cup=\E8%i%p1%3d%p2%3d, cuu1=\EK, cvvis=\Ex, 20671 dch1=\E6, home=\ET, ht=^I, ich1=\E5, il1=\E3, ind=^J, kbs=^H, 20672 kcub1=^H, kcud1=^J, nel=^M^J, ri=\Ew, 20673# The d800 was an early portable terminal from c.1984-85 that looked a lot 20674# like the original Compaq `lunchbox' portable (but no handle). It had a vt220 20675# mode (which is what this entry looks like) and several other lesser-known 20676# emulations. 20677d800|Direct 800/A, 20678 OTbs, am, da, db, msgr, xhp, 20679 cols#80, it#8, lines#24, 20680 acsc=``a1fxgqh0jYk?lZm@nEooppqDrrsstCu4vAwBx3yyzz{{||}}~~, 20681 bel=^G, clear=\E[1;1H\E[2J, cnorm=\E[>12h, cr=^M, cub1=^H, 20682 cud1=^J, cuf1=\E[C, cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, 20683 cvvis=\E[>12l, ed=\E[J, el=\E[K, ht=^I, ind=\ED, kcub1=\E[D, 20684 kcud1=\E[B, kcuf1=\E[C, kcuu1=\E[A, kf1=\EOP, kf2=\EOQ, 20685 kf3=\EOR, kf4=\EOS, kf5=\EOT, kf6=\EOU, kf7=\EOV, kf8=\EOW, 20686 ri=\EM, rmacs=\E[m, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 20687 smacs=\E[1m, smso=\E[7m, smul=\E[4m, 20688digilog|digilog 333, 20689 OTbs, 20690 cols#80, lines#16, 20691 bel=^G, cr=^M, cub1=^H, cud1=^J, cuf1=^I, cuu1=^O, el=^X, 20692 home=^N, ind=^J, 20693# The DWK was a terminal manufactured in the Soviet Union c.1986 20694dwk|dwk-vt|dwk terminal, 20695 am, 20696 cols#80, it#8, lines#24, 20697 acsc=+\^\,Q-S.M0\177`+a\:f'g#h#i#jXkClJmFnNo~qUs_tEuPv\\wKxW~_, 20698 bel=^G, clear=\EH\EJ, cr=^M, cub1=^H, cud1=^J, cuf1=\EC, 20699 cup=\EY%p1%{32}%+%c%p2%{32}%+%c, cuu1=\EA, dch1=\EP, 20700 ed=\EJ, el=\EK, home=\EH, ht=^I, ich1=\EQ, ind=^J, kbs=\177, 20701 kcub1=\ED, kcud1=\EB, kcuf1=\EC, kcuu1=\EA, kdch1=\Ee, 20702 kf1=\Ef1, kf10=\Ef0, kf2=\Ef2, kf3=\Ef3, kf4=\Ef4, kf5=\Ef5, 20703 kf6=\Ef6, kf7=\Ef7, kf8=\Ef8, kf9=\Ef9, kich1=\Ed, knp=\Eh, 20704 kpp=\Eg, nel=^M^J, rev=\ET, ri=\ES, rmacs=\EG, rmso=\EX, 20705 sgr0=\EX, smacs=\EF, smso=\ET, 20706env230|envision230|envision 230 graphics terminal, 20707 xenl@, 20708 enacs@, mc0=\E[0i, mc4=\E[4i, mc5=\E[5i, rmacs@, 20709 sgr=\E[0%?%p1%t;7%;%?%p2%t;4%;%?%p3%t;7%;%?%p4%t;5%;%?%p6%t;1%;m$<2>, 20710 sgr0=\E[0m$<2>, smacs@, use=vt100, 20711# These execuports were impact-printer ttys with a 30- or maybe 15-cps acoustic 20712# coupler attached, the whole rig fitting in a suitcase and more or less 20713# portable. Hot stuff for c.1977 :-) -- esr 20714ep48|ep4080|execuport 4080, 20715 OTbs, am, os, 20716 cols#80, 20717 bel=^G, cr=^M, cub1=^H, cud1=^J, hd=^\, hu=^^, ind=^J, 20718ep40|ep4000|execuport 4000, 20719 cols#136, use=ep4080, 20720# Adam Thompson <athompso@pangea.ca> tells us: 20721# Informer series - these are all portable units, resembling older 20722# automatic bread-baking machines. The terminal looks like a `clamshell' 20723# design, but isn't. The structure is similar to the Direct terminals, 20724# but only half the width. The entire unit is only about 10" wide. 20725# It features an 8" screen (6" or 7" if you have color!), and an 9"x6" 20726# keyboard. All the keys are crammed together, much like some laptop 20727# PCs today, but perhaps less well organized...all these units have a 20728# bewildering array of plugs on the back, including a built-in modem. 20729# The 305 was a color version of the 304; the 306 and 307 were mono and 20730# color terminals built for IBM bisync protocols. 20731# From: Paul Leondis <unllab@amber.berkeley.edu> 20732ifmr|Informer D304, 20733 OTbs, am, 20734 cols#80, lines#24, 20735 clear=\EZ, cub1=^H, cud1=^J, cuf1=\EC, 20736 cup=\EY%p2%{32}%+%c%p1%{32}%+%c, cuu1=\EA, dch1=\E\\, 20737 ed=\E/, el=\EQ, home=\EH, ich1=\E[, ri=\En, rmso=\EK, sgr0=\EK, 20738 smso=\EJ, 20739# Entry largely based on wy60 and has the features of wy60ak. 20740opus3n1+|Esprit Opus3n1+ in wy60 mode with ANSI arrow keys, 20741 am, bw, hs, km, mir, msgr, ul, xon, 20742 cols#80, lh#1, lines#24, lw#8, nlab#8, wsl#80, 20743 acsc=0wa_h[jukslrmqnxqzttuyv]wpxv, bel=^G, blink=\EG2, 20744 cbt=\EI, civis=\E`0, clear=\E*$<100>, cnorm=\E`1, cr=^M, 20745 cub1=^H, cud1=^J, cuf1=^L, cup=\Ea%i%p1%dR%p2%dC, cuu1=^K, 20746 dch1=\EW$<11>, dim=\EGp, dl1=\ER$<5>, dsl=\Ez(\r, 20747 ed=\EY$<100>, el=\ET, fsl=^M, home=\036$<2>, ht=\011$<5>, 20748 hts=\E1, if=/usr/share/tabset/std, il1=\EE$<4>, ind=^J, 20749 ip=$<3>, 20750 is2=\E`\:\Ee(\EO\Ee6\Ec41\E~4\Ec21\Ed/\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177\Ezz`\E[F\177\EA1*\EZH12, 20751 kHOM=\E{, kbs=^H, kcbt=\EI, kcub1=\E[D, kcud1=\E[B, 20752 kcuf1=\E[C, kcuu1=\E[A, kdch1=\EW, kdl1=\ER, ked=\EY, 20753 kel=\ET, kend=\E[F, kent=\E7, kf1=^A@\r, kf10=^AI\r, 20754 kf11=^AJ\r, kf12=^AK\r, kf13=^AL\r, kf14=^AM\r, kf15=^AN\r, 20755 kf16=^AO\r, kf2=^AA\r, kf3=^AB\r, kf4=^AC\r, kf5=^AD\r, 20756 kf6=^AE\r, kf7=^AF\r, kf8=^AG\r, kf9=^AH\r, khome=^^, 20757 kich1=\EQ, kil1=\EE, knp=\EK, kpp=\EJ, kprt=\EP, krpl=\Er, 20758 mc0=\EP, mc4=^T, mc5=^R, nel=\r\n$<3>, 20759 pfloc=\EZ2%p1%{63}%+%c%p2%s\177, 20760 pfx=\EZ1%p1%{63}%+%c%p2%s\177, 20761 pln=\Ez%p1%{47}%+%c%p2%s\r, prot=\E), ri=\Ej$<7>, 20762 rmacs=\EH^C, rmam=\Ed., rmcup=, rmir=\Er, rmln=\EA11, 20763 rmxon=\Ec20, rs1=\E~!\E~4$<150>, rs2=\EeF$<150>, 20764 rs3=\EwG\Ee($<150>, 20765 sgr=%?%p8%t\E)%e\E(%;%?%p9%t\EH\002%e\EH\003%;\EG%{48}%?%p2%t%{8}%|%;%?%p1%p3%|%t%{4}%|%;%?%p4%t%{2}%|%;%?%p1%p5%|%t%{64}%|%;%?%p7%t%{1}%|%;%c, 20766 sgr0=\E(\EH\003\EG0\EcD, smacs=\EH^B, smam=\Ed/, 20767 smcup=\Ezz&\E[A\177\Ezz'\E[B\177\Ezz(\E[D\177\Ezz)\E[C\177\Ezz<\E[Q\177, 20768 smir=\Eq, smln=\EA10, smxon=\Ec21, tbc=\E0, tsl=\Ez(, 20769 uc=\EG8\EG0, use=adm+sgr, 20770teletec|Teletec Datascreen, 20771 OTbs, am, 20772 cols#80, lines#24, 20773 bel=^G, clear=^L, cr=^M, cub1=^H, cud1=^J, cuf1=^_, cuu1=^K, 20774 home=^^, ind=^J, 20775# From: Mark Dornfeld <romwa@ucbvax.berkeley.edu> 20776# This description is for the LANPAR Technologies VISION 3220 20777# terminal from 1984/85. The function key definitions k0-k5 represent the 20778# edit keypad: FIND, INSERT HERE, REMOVE, SELECT, PREV SCREEN, 20779# NEXT SCREEN. The key definitions k6-k9 represent the PF1 to PF4 keys. 20780# 20781# Kenneth Randell <kenr@datametrics.com> writes on 31 Dec 1998: 20782# I had a couple of scopes (3221) like this once where I used to work, around 20783# the 1987 time frame if memory serves me correctly. These scopes were made 20784# by an outfit called LANPAR Technologies, and were meant to me DEC VT 220 20785# compatible. The 3220 was a plain text terminal like the VT-220, the 3221 20786# was a like the VT-240 (monochrome with Regis + Sixel graphics), and the 3222 20787# was like the VT-241 (color with Regis + Sixel Graphics). These terminals 20788# (3221) cost about $1500 each, and one was always broken -- had to be sent 20789# back to the shop for repairs. 20790# The only real advantage these scopes had over the VT-240's were: 20791# 1) They were faster in the Regis display, or at least the ones I did 20792# 2) They had a handy debugging feature where you could split-screen the 20793# scope, the graphics would appear on the top, and the REGIS commands would 20794# appear on the bottom. I don't remember the VT-240s being able to do that. 20795# I would swear that LANPAR Technologies was in MA someplace, but since I 20796# don't work at the same place anymore, and those terminals and manuals were 20797# long since junked, I cannot be any more sure than that. 20798# 20799# (v3220: removed obsolete ":kn#10:", 20800# I added <rmam>/<smam> based on the init string -- esr) 20801v3220|LANPAR Vision II model 3220/3221/3222, 20802 OTbs, am, mir, xenl, 20803 cols#80, it#8, lines#24, 20804 clear=\E[H\E[J, cub1=^H, cud1=\E[B, cuf1=\E[C, 20805 cup=\E[%i%p1%d;%p2%dH, cuu1=\E[A, dch1=\E[P, dl1=\E[M, 20806 ed=\E[J, el=\E[K, ht=^I, il1=\E[L, 20807 is2=\E>\E[?3l\E[?7h\E[?8h\E[p, kcub1=\E[D, kcud1=\E[B, 20808 kcuf1=\E[C, kcuu1=\E[A, kf0=\E[1~, kf1=\E[2~, kf2=\E[3~, 20809 kf3=\E[4~, kf4=\E[5~, kf5=\E[6~, kf6=\E[OP, kf7=\E[OQ, 20810 kf8=\E[OR, kf9=\E[OS, khome=\E[H, ri=\EM, rmam=\E[?7l, 20811 rmir=\E[4l, rmkx=\E>, rmso=\E[m, rmul=\E[m, sgr0=\E[m, 20812 smam=\E[?7h, smir=\E[4h, smkx=\E=, smso=\E[7m, smul=\E[4m, 20813######## ICH/ICH1 VERSUS RMIR/SMIR 20814# 20815# Some non-curses applications get confused if both ich/ich1 and rmir/smir 20816# are present; the symptom is doubled characters in an update using insert. 20817# These applications are technically correct; in both 4.3BSD termcap and 20818# terminfo, you're not actually supposed to specify both ich/ich1 and rmir/smir 20819# unless the terminal needs both. To my knowledge, no terminal still in this 20820# file requires both other than the very obsolete dm2500. 20821# 20822# For ncurses-based applications this is not a problem, as ncurses uses 20823# one or the other as appropriate but never mixes the two. Therefore we 20824# have not corrected entries like `linux' and `xterm' that specify both. 20825# If you see doubled characters from these, use the linux-nic and xterm-nic 20826# entries that suppress ich/ich1. And upgrade to ncurses! 20827# 20828 20829######## VT100/ANSI/ISO 6429/ECMA-48/PC-TERM TERMINAL STANDARDS 20830# 20831# ANSI X3.64 has been withdrawn and replaced by ECMA-48. The ISO 6429 and 20832# ECMA-48 standards are said to be almost identical, but are not the same 20833# as X3.64 (though for practical purposes they are close supersets of it). 20834# 20835# You can obtain ECMA-48 for free by sending email to helpdesk@ecma.ch 20836# requesting the standard(s) you want (i.e. ECMA-48, "Control Functions for 20837# Coded Character Sets"), include your snail-mail address, and you should 20838# receive the document in due course. Don't expect an email acknowledgement. 20839# 20840# Related standards include "X3.4-1977: American National Standard Code for 20841# Information Interchange" (the ASCII standard) and "X3.41.1974: 20842# Code-Extension Techniques for Use with the 7-Bit Coded Character Set of 20843# American National Standard for Information Interchange." I believe (but 20844# am not certain) that these are effectively identical to ECMA-6 and ECMA-35 20845# respectively. 20846# 20847 20848#### VT100/ANSI/ECMA-48 20849# 20850# ANSI Standard (X3.64) Control Sequences for Video Terminals and Peripherals 20851# and ECMA-48 Control Functions for Coded Character Sets. 20852# 20853# Much of the content of this comment is adapted from a table prepared by 20854# Richard Shuford, based on a 1984 Byte article. Terminfo correspondences, 20855# discussion of some terminfo-related issues, and updates to capture ECMA-48 20856# have been added. Control functions described in ECMA-48 only are tagged 20857# with * after their names. 20858# 20859# The table is a complete list of the defined ANSI X3.64/ECMA-48 control 20860# sequences. In the main table, \E stands for an escape (\033) character, 20861# SPC for space. Pn stands for a single numeric parameter to be inserted 20862# in decimal ASCII. Ps stands for a list of such parameters separated by 20863# semicolons. Parameter meanings for most parametrized sequences are 20864# decribed in the notes. 20865# 20866# Sequence Sequence Parameter or 20867# Mnemonic Name Sequence Value Mode terminfo 20868# ----------------------------------------------------------------------------- 20869# APC Applicatn Program Command \E _ - Delim - 20870# BEL Bell * ^G - - bel 20871# BPH Break Permitted Here * \E B - * - 20872# BS Backpace * ^H - EF - 20873# CAN Cancel * ^X - - - (A) 20874# CBT Cursor Backward Tab \E [ Pn Z 1 eF cbt 20875# CCH Cancel Previous Character \E T - - - 20876# CHA Cursor Horizntal Absolute \E [ Pn G 1 eF hpa (B) 20877# CHT Cursor Horizontal Tab \E [ Pn I 1 eF tab (C) 20878# CMD Coding Method Delimiter * \E 20879# CNL Cursor Next Line \E [ Pn E 1 eF nel (D) 20880# CPL Cursor Preceding Line \E [ Pn F 1 eF - 20881# CPR Cursor Position Report \E [ Pn ; Pn R 1, 1 - - (E) 20882# CSI Control Sequence Intro \E [ - Intro - 20883# CTC Cursor Tabulation Control \E [ Ps W 0 eF - (F) 20884# CUB Cursor Backward \E [ Pn D 1 eF cub 20885# CUD Cursor Down \E [ Pn B 1 eF cud 20886# CUF Cursor Forward \E [ Pn C 1 eF cuf 20887# CUP Cursor Position \E [ Pn ; Pn H 1, 1 eF cup (G) 20888# CUU Cursor Up \E [ Pn A 1 eF cuu 20889# CVT Cursor Vertical Tab \E [ Pn Y - eF - (H) 20890# DA Device Attributes \E [ Pn c 0 - - 20891# DAQ Define Area Qualification \E [ Ps o 0 - - 20892# DCH Delete Character \E [ Pn P 1 eF dch 20893# DCS Device Control String \E P - Delim - 20894# DL Delete Line \E [ Pn M 1 eF dl 20895# DLE Data Link Escape * ^P - - - 20896# DMI Disable Manual Input \E \ - Fs - 20897# DSR Device Status Report \E [ Ps n 0 - - (I) 20898# DTA Dimension Text Area * \E [ Pn ; Pn SPC T - PC - 20899# EA Erase in Area \E [ Ps O 0 eF - (J) 20900# ECH Erase Character \E [ Pn X 1 eF ech 20901# ED Erase in Display \E [ Ps J 0 eF ed (J) 20902# EF Erase in Field \E [ Ps N 0 eF - 20903# EL Erase in Line \E [ Ps K 0 eF el (J) 20904# EM End of Medium * ^Y - - - 20905# EMI Enable Manual Input \E b Fs - 20906# ENQ Enquire ^E - - - 20907# EOT End Of Transmission ^D - * - 20908# EPA End of Protected Area \E W - - - (K) 20909# ESA End of Selected Area \E G - - - 20910# ESC Escape ^[ - - - 20911# ETB End Transmission Block ^W - - - 20912# ETX End of Text ^C - - - 20913# FF Form Feed ^L - - - 20914# FNK Function Key * \E [ Pn SPC W - - - 20915# GCC Graphic Char Combination* \E [ Pn ; Pn SPC B - - - 20916# FNT Font Selection \E [ Pn ; Pn SPC D 0, 0 FE - 20917# GSM Graphic Size Modify \E [ Pn ; Pn SPC B 100, 100 FE - (L) 20918# GSS Graphic Size Selection \E [ Pn SPC C none FE - 20919# HPA Horz Position Absolute \E [ Pn ` 1 FE - (B) 20920# HPB Char Position Backward \E [ j 1 FE - 20921# HPR Horz Position Relative \E [ Pn a 1 FE - (M) 20922# HT Horizontal Tab * ^I - FE - (N) 20923# HTJ Horz Tab w/Justification \E I - FE - 20924# HTS Horizontal Tab Set \E H - FE hts 20925# HVP Horz & Vertical Position \E [ Pn ; Pn f 1, 1 FE - (G) 20926# ICH Insert Character \E [ Pn @ 1 eF ich 20927# IDCS ID Device Control String \E [ SPC O - * - 20928# IGS ID Graphic Subrepertoire \E [ SPC M - * - 20929# IL Insert Line \E [ Pn L 1 eF il 20930# IND Index \E D - FE - 20931# INT Interrupt \E a - Fs - 20932# JFY Justify \E [ Ps SPC F 0 FE - 20933# IS1 Info Separator #1 * ^_ - * - 20934# IS2 Info Separator #1 * ^^ - * - 20935# IS3 Info Separator #1 * ^] - * - 20936# IS4 Info Separator #1 * ^\ - * - 20937# LF Line Feed ^J - - - 20938# LS1R Locking Shift Right 1 * \E ~ - - - 20939# LS2 Locking Shift 2 * \E n - - - 20940# LS2R Locking Shift Right 2 * \E } - - - 20941# LS3 Locking Shift 3 * \E o - - - 20942# LS3R Locking Shift Right 3 * \E | - - - 20943# MC Media Copy \E [ Ps i 0 - - (S) 20944# MW Message Waiting \E U - - - 20945# NAK Negative Acknowledge * ^U - * - 20946# NBH No Break Here * \E C - - - 20947# NEL Next Line \E E - FE nel (D) 20948# NP Next Page \E [ Pn U 1 eF - 20949# NUL Null * ^@ - - - 20950# OSC Operating System Command \E ] - Delim - 20951# PEC Pres. Expand/Contract * \E Pn SPC Z 0 - - 20952# PFS Page Format Selection * \E Pn SPC J 0 - - 20953# PLD Partial Line Down \E K - FE - (T) 20954# PLU Partial Line Up \E L - FE - (U) 20955# PM Privacy Message \E ^ - Delim - 20956# PP Preceding Page \E [ Pn V 1 eF - 20957# PPA Page Position Absolute * \E [ Pn SPC P 1 FE - 20958# PPB Page Position Backward * \E [ Pn SPC R 1 FE - 20959# PPR Page Position Forward * \E [ Pn SPC Q 1 FE - 20960# PTX Parallel Texts * \E [ \ - - - 20961# PU1 Private Use 1 \E Q - - - 20962# PU2 Private Use 2 \E R - - - 20963# QUAD Typographic Quadding \E [ Ps SPC H 0 FE - 20964# REP Repeat Char or Control \E [ Pn b 1 - rep 20965# RI Reverse Index \E M - FE - (V) 20966# RIS Reset to Initial State \E c - Fs - 20967# RM Reset Mode * \E [ Ps l - - - (W) 20968# SACS Set Add. Char. Sep. * \E [ Pn SPC / 0 - - 20969# SAPV Sel. Alt. Present. Var. * \E [ Ps SPC ] 0 - - (X) 20970# SCI Single-Char Introducer \E Z - - - 20971# SCO Sel. Char. Orientation * \E [ Pn ; Pn SPC k - - - 20972# SCS Set Char. Spacing * \E [ Pn SPC g - - - 20973# SD Scroll Down \E [ Pn T 1 eF rin 20974# SDS Start Directed String * \E [ Pn ] 1 - - 20975# SEE Select Editing Extent \E [ Ps Q 0 - - (Y) 20976# SEF Sheet Eject & Feed * \E [ Ps ; Ps SPC Y 0,0 - - 20977# SGR Select Graphic Rendition \E [ Ps m 0 FE sgr (O) 20978# SHS Select Char. Spacing * \E [ Ps SPC K 0 - - 20979# SI Shift In ^O - - - (P) 20980# SIMD Sel. Imp. Move Direct. * \E [ Ps ^ - - - 20981# SL Scroll Left \E [ Pn SPC @ 1 eF - 20982# SLH Set Line Home * \E [ Pn SPC U - - - 20983# SLL Set Line Limit * \E [ Pn SPC V - - - 20984# SLS Set Line Spacing * \E [ Pn SPC h - - - 20985# SM Select Mode \E [ Ps h none - - (W) 20986# SO Shift Out ^N - - - (Q) 20987# SOH Start Of Heading * ^A - - - 20988# SOS Start of String * \E X - - - 20989# SPA Start of Protected Area \E V - - - (Z) 20990# SPD Select Pres. Direction * \E [ Ps ; Ps SPC S 0,0 - - 20991# SPH Set Page Home * \E [ Ps SPC G - - - 20992# SPI Spacing Increment \E [ Pn ; Pn SPC G none FE - 20993# SPL Set Page Limit * \E [ Ps SPC j - - - 20994# SPQR Set Pr. Qual. & Rapid. * \E [ Ps SPC X 0 - - 20995# SR Scroll Right \E [ Pn SPC A 1 eF - 20996# SRCS Set Reduced Char. Sep. * \E [ Pn SPC f 0 - - 20997# SRS Start Reversed String * \E [ Ps [ 0 - - 20998# SSA Start of Selected Area \E F - - - 20999# SSU Select Size Unit * \E [ Pn SPC I 0 - - 21000# SSW Set Space Width * \E [ Pn SPC [ none - - 21001# SS2 Single Shift 2 (G2 set) \E N - Intro - 21002# SS3 Single Shift 3 (G3 set) \E O - Intro - 21003# ST String Terminator \E \ - Delim - 21004# STAB Selective Tabulation * \E [ Pn SPC ^ - - - 21005# STS Set Transmit State \E S - - - 21006# STX Start pf Text * ^B - - - 21007# SU Scroll Up \E [ Pn S 1 eF indn 21008# SUB Substitute * ^Z - - - 21009# SVS Select Line Spacing * \E [ Pn SPC \ 1 - - 21010# SYN Synchronous Idle * ^F - - - 21011# TAC Tabul. Aligned Centered * \E [ Pn SPC b - - - 21012# TALE Tabul. Al. Leading Edge * \E [ Pn SPC a - - - 21013# TATE Tabul. Al. Trailing Edge* \E [ Pn SPC ` - - - 21014# TBC Tab Clear \E [ Ps g 0 FE tbc 21015# TCC Tabul. Centered on Char * \E [ Pn SPC c - - - 21016# TSR Tabulation Stop Remove * \E [ Pn SPC d - FE - 21017# TSS Thin Space Specification \E [ Pn SC E none FE - 21018# VPA Vert. Position Absolute \E [ Pn d 1 FE vpa 21019# VPB Line Position Backward * \E [ Pn k 1 FE - 21020# VPR Vert. Position Relative \E [ Pn e 1 FE - (R) 21021# VT Vertical Tabulation * ^K - FE - 21022# VTS Vertical Tabulation Set \E J - FE - 21023# 21024# --------------------------------------------------------------------------- 21025# 21026# Notes: 21027# 21028# Some control characters are listed in the ECMA-48 standard without 21029# being assigned functions relevant to terminal control there (they 21030# referred to other standards such as ISO 1745 or ECMA-35). They are listed 21031# here anyway for completeness. 21032# 21033# (A) ECMA-48 calls this "CancelCharacter" but retains the CCH abbreviation. 21034# 21035# (B) There seems to be some confusion abroad between CHA and HPA. Most 21036# `ANSI' terminals accept the CHA sequence, not the HPA. but terminfo calls 21037# the capability (hpa). ECMA-48 calls this "Cursor Character Absolute" but 21038# preserved the CHA abbreviation. 21039# 21040# (C) CHT corresponds to terminfo (tab). Usually it has the value ^I. 21041# Occasionally (as on, for example, certain HP terminals) this has the HTJ 21042# value. ECMA-48 calls this "Cursor Forward Tabulation" but preserved the 21043# CHT abbreviation. 21044# 21045# (D) terminfo (nel) is usually \r\n rather than ANSI \EE. 21046# 21047# (E) ECMA-48 calls this "Active Position Report" but preserves the CPR 21048# abbreviation. 21049# 21050# (F) CTC parameter values: 0 = set char tab, 1 = set line tab, 2 = clear 21051# char tab, 3 = clear line tab, 4 = clear all char tabs on current line, 21052# 5 = clear all char tabs, 6 = clear all line tabs. 21053# 21054# (G) CUP and HVP are identical in effect. Some ANSI.SYS versions accept 21055# HVP, but always allow CUP as an alternate. ECMA-48 calls HVP "Character 21056# Position Absolute" but retains the HVP abbreviation. 21057# 21058# (H) ECMA calls this "Cursor Line Tabulation" but preserves the CVT 21059# abbreviation. 21060# 21061# (I) DSR parameter values: 0 = ready, 1 = busy, 2 = busy, will send DSR 21062# later, 3 = malfunction, 4 = malfunction, will send DSR later, 5 = request 21063# DSR, 6 = request CPR response. 21064# 21065# (J) ECMA calls ED "Erase In Page". EA/ED/EL parameters: 0 = clear to end, 21066# 1 = clear from beginning, 2 = clear. 21067# 21068# (K) ECMA calls this "End of Guarded Area" but preserves the EPA abbreviation. 21069# 21070# (L) The GSM parameters are vertical and horizontal parameters to scale by. 21071# 21072# (M) Some ANSI.SYS versions accept HPR, but more commonly `ANSI' terminals 21073# use CUF for this function and ignore HPR. ECMA-48 calls this "Character 21074# Position Relative" but retains the HPR abbreviation. 21075# 21076# (N) ECMA-48 calls this "Character Tabulation" but retains the HT 21077# abbreviation. 21078# 21079# (O) SGR parameter values: 0 = default mode (attributes off), 1 = bold, 21080# 2 = dim, 3 = italicized, 4 = underlined, 5 = slow blink, 6 = fast blink, 21081# 7 = reverse video, 8 = invisible, 9 = crossed-out (marked for deletion), 21082# 10 = primary font, 10 + n (n in 1..9) = nth alternative font, 20 = Fraktur, 21083# 21 = double underline, 22 = turn off 2, 23 = turn off 3, 24 = turn off 4, 21084# 25 = turn off 5, 26 = proportional spacing, 27 = turn off 7, 28 = turn off 21085# 8, 29 = turn off 9, 30 = black fg, 31 = red fg, 32 = green fg, 33 = yellow 21086# fg, 34 = blue fg, 35 = magenta fg, 36 = cyan fg, 37 = white fg, 38 = set 21087# fg color as in CCIT T.416, 39 = set default fg color, 40 = black bg 21088# 41 = red bg, 42 = green bg, 43 = yellow bg, 44 = blue bg, 45 = magenta bg, 21089# 46 = cyan bg, 47 = white bg, 48 = set bg color as in CCIT T.416, 39 = set 21090# default bg color, 50 = turn off 26, 51 = framed, 52 = encircled, 53 = 21091# overlined, 54 = turn off 51 & 52, 55 = not overlined, 56-59 = reserved, 21092# 61-65 = variable highlights for ideograms. 21093# 21094# (P) SI is also called LSO, Locking Shift Zero. 21095# 21096# (Q) SI is also called LS1, Locking Shift One. 21097# 21098# (R) Some ANSI.SYS versions accept VPR, but more commonly `ANSI' terminals 21099# use CUD for this function and ignore VPR. ECMA calls it `Line Position 21100# Absolute' but retains the VPA abbreviation. 21101# 21102# (S) MC parameters: 0 = start xfer to primary aux device, 1 = start xfer from 21103# primary aux device, 2 = start xfer to secondary aux device, 3 = start xfer 21104# from secondary aux device, 4 = stop relay to primary aux device, 5 = 21105# start relay to primary aux device, 6 = stop relay to secondary aux device, 21106# 7 = start relay to secondary aux device. 21107# 21108# (T) ECMA-48 calls this "Partial Line Forward" but retains the PLD 21109# abbreviation. 21110# 21111# (U) ECMA-48 calls this "Partial Line Backward" but retains the PLU 21112# abbreviation. 21113# 21114# (V) ECMA-48 calls this "Reverse Line Feed" but retains the RI abbreviation. 21115# 21116# (W) RM/SM modes are as follows: 1 = Guarded Area Transfer Mode (GATM), 21117# 2 = Keyboard Action Mode (KAM), 3 = Control Representation Mode (CRM), 21118# 4 = Insertion Replacement Mode, 5 = Status Report Transfer Mode (SRTM), 21119# 6 = Erasure Mode (ERM), 7 = Line Editing Mode (LEM), 8 = Bi-Directional 21120# Support Mode (BDSM), 9 = Device Component Select Mode (DCSM), 21121# 10 = Character Editing Mode (HEM), 11 = Positioning Unit Mode (PUM), 21122# 12 = Send/Receive Mode, 13 = Format Effector Action Mode (FEAM), 21123# 14 = Format Effector Transfer Mode (FETM), 15 = Multiple Area Transfer 21124# Mode (MATM), 16 = Transfer Termination Mode, 17 = Selected Area Transfer 21125# Mode, 18 = Tabulation Stop Mode, 19 = Editing Boundary Mode, 20 = Line Feed 21126# New Line Mode (LF/NL), Graphic Rendition Combination Mode (GRCM), 22 = 21127# Zero Default Mode (ZDM). The EBM and LF/NL modes have actually been removed 21128# from ECMA-48's 5th edition but are listed here for reference. 21129# 21130# (X) Select Alternate Presentation Variants is used only for non-Latin 21131# alphabets. 21132# 21133# (Y) "Select Editing Extent" (SEE) was ANSI "Select Edit Extent Mode" (SEM). 21134# 21135# (Z) ECMA-48 calls this "Start of Guarded Area" but retains the SPA 21136# abbreviation. 21137# 21138# --------------------------------------------------------------------------- 21139# 21140# Abbreviations: 21141# 21142# Intro an Introducer of some kind of defined sequence; the normal 7-bit 21143# X3.64 Control Sequence Introducer is the two characters "Escape [" 21144# 21145# Delim a Delimiter 21146# 21147# x/y identifies a character by position in the ASCII table (column/row) 21148# 21149# eF editor function (see explanation) 21150# 21151# FE format effector (see explanation) 21152# 21153# F is a Final character in 21154# an Escape sequence (F from 3/0 to 7/14 in the ASCII table) 21155# a control sequence (F from 4/0 to 7/14) 21156# 21157# Gs is a graphic character appearing in strings (Gs ranges from 21158# 2/0 to 7/14) in the ASCII table 21159# 21160# Ce is a control represented as a single bit combination in the C1 set 21161# of controls in an 8-bit character set 21162# 21163# C0 the familiar set of 7-bit ASCII control characters 21164# 21165# C1 roughly, the set of control chars available only in 8-bit systems. 21166# This is too complicated to explain fully here, so read Jim Fleming's 21167# article in the February 1983 BYTE, especially pages 214 through 224. 21168# 21169# Fe is a Final character of a 2-character Escape sequence that has an 21170# equivalent representation in an 8-bit environment as a Ce-type 21171# (Fe ranges from 4/0 to 5/15) 21172# 21173# Fs is a Final character of a 2-character Escape sequence that is 21174# standardized internationally with identical representation in 7-bit 21175# and 8-bit environments and is independent of the currently 21176# designated C0 and C1 control sets (Fs ranges from 6/0 to 7/14) 21177# 21178# I is an Intermediate character from 2/0 to 2/15 (inclusive) in the 21179# ASCII table 21180# 21181# P is a parameter character from 3/0 to 3/15 (inclusive) in the ASCII 21182# table 21183# 21184# Pn is a numeric parameter in a control sequence, a string of zero or 21185# more characters ranging from 3/0 to 3/9 in the ASCII table 21186# 21187# Ps is a variable number of selective parameters in a control sequence 21188# with each selective parameter separated from the other by the code 21189# 3/11 (which usually represents a semicolon); Ps ranges from 21190# 3/0 to 3/9 and includes 3/11 21191# 21192# * Not relevant to terminal control, listed for completeness only. 21193# 21194# Format Effectors versus Editor Functions 21195# 21196# A format effector specifies how following output is to be displayed. 21197# An editor function allows you to modify the display. Informally 21198# format effectors may be destructive; format effectors should not be. 21199# 21200# For instance, a format effector that moves the "active position" (the 21201# cursor or equivalent) one space to the left would be useful when you want to 21202# create an overstrike, a compound character made of two standard characters 21203# overlaid. Control-H, the Backspace character, is actually supposed to be a 21204# format effector, so you can do this. But many systems use it in a 21205# nonstandard fashion, as an editor function, deleting the character to the 21206# left of the cursor and moving the cursor left. When Control-H is assumed to 21207# be an editor function, you cannot predict whether its use will create an 21208# overstrike unless you also know whether the output device is in an "insert 21209# mode" or an "overwrite mode". When Control-H is used as a format effector, 21210# its effect can always be predicted. The familiar characters carriage 21211# return, linefeed, formfeed, etc., are defined as format effectors. 21212# 21213# NOTES ON THE DEC VT100 IMPLEMENTATION 21214# 21215# Control sequences implemented in the VT100 are as follows: 21216# 21217# CPR, CUB, CUD, CUF, CUP, CUU, DA, DSR, ED, EL, HTS, HVP, IND, 21218# LNM, NEL, RI, RIS, RM, SGR, SM, TBC 21219# 21220# plus several private DEC commands. 21221# 21222# Erasing parts of the display (EL and ED) in the VT100 is performed thus: 21223# 21224# Erase from cursor to end of line Esc [ 0 K or Esc [ K 21225# Erase from beginning of line to cursor Esc [ 1 K 21226# Erase line containing cursor Esc [ 2 K 21227# Erase from cursor to end of screen Esc [ 0 J or Esc [ J 21228# Erase from beginning of screen to cursor Esc [ 1 J 21229# Erase entire screen Esc [ 2 J 21230# 21231# Some brain-damaged terminal/emulators respond to Esc [ J as if it were 21232# Esc [ 2 J, but this is wrong; the default is 0. 21233# 21234# The VT100 responds to receiving the DA (Device Attributes) control 21235# 21236# Esc [ c (or Esc [ 0 c) 21237# 21238# by transmitting the sequence 21239# 21240# Esc [ ? l ; Ps c 21241# 21242# where Ps is a character that describes installed options. 21243# 21244# The VT100's cursor location can be read with the DSR (Device Status 21245# Report) control 21246# 21247# Esc [ 6 n 21248# 21249# The VT100 reports by transmitting the CPR sequence 21250# 21251# Esc [ Pl ; Pc R 21252# 21253# where Pl is the line number and Pc is the column number (in decimal). 21254# 21255# The specification for the DEC VT100 is document EK-VT100-UG-003. 21256 21257#### ANSI.SYS 21258# 21259# Here is a description of the color and attribute controls supported in the 21260# the ANSI.SYS driver under MS-DOS. Most console drivers and ANSI 21261# terminal emulators for Intel boxes obey these. They are a proper subset 21262# of the ECMA-48 escapes. 21263# 21264# 0 all attributes off 21265# 1 foreground bright 21266# 4 underscore on 21267# 5 blink on/background bright (not reliable with brown) 21268# 7 reverse-video 21269# 8 set blank (non-display) 21270# 10 set primary font 21271# 11 set first alternate font (on PCs, display ROM characters 1-31) 21272# 12 set second alternate font (on PCs, display IBM high-half chars) 21273# 21274# Color attribute sets 21275# 3n set foreground color / 0=black, 1=red, 2=green, 3=brown, 21276# 4n set background color \ 4=blue, 5=magenta, 6=cyan, 7=white 21277# Bright black becomes gray. Bright brown becomes yellow, 21278# These coincide with the prescriptions of the ISO 6429/ECMA-48 standard. 21279# 21280# * If the 5 attribute is on and you set a background color (40-47) it is 21281# supposed to enable bright background. 21282# 21283# * Many VGA cards (such as the Paradise and compatibles) do the wrong thing 21284# when you try to set a "bright brown" (yellow) background with attribute 21285# 5 (you get a blinking yellow foreground instead). A few displays 21286# (including the System V console) support an attribute 6 that undoes this 21287# braindamage (this is required by iBCS2). 21288# 21289# * Some older versions of ANSI.SYS have a bug that causes thems to require 21290# ESC [ Pn k as EL rather than the ANSI ESC [ Pn K. (This is not ECMA-48 21291# compatible.) 21292 21293#### Intel Binary Compatibility Standard 21294# 21295# For comparison, here are the capabilities implied by the Intel Binary 21296# Compatibility Standard for UNIX systems (Intel order number 468366-001). 21297# These recommendations are optional. IBCS2 allows the leading escape to 21298# be either the 7-bit \E[ or 8-bit \0233 introducer, in accordance with 21299# the ANSI X.364/ISO 6429/ECMA-48 standard. Here are the iBCS2 capabilities 21300# (as described in figure 9-3 of the standard). Those expressed in the ibcs2 21301# terminfo entry are followed with the corresponding capability in parens: 21302# 21303# CSI <n>k disable (n=0) or enable (n=1) keyclick 21304# CSI 2h lock keyboard 21305# CSI 2i send screen as input 21306# CSI 2l unlock keyboard 21307# CSI 6m enable background color intensity 21308# CSI <0-2>c reserved 21309# CSI <0-59>m select graphic rendition 21310# CSI <n>;<m>H (cup) cursor to line n and column m 21311# CSI <n>;<m>f cursor to line n and column m 21312# CSI <n>@ (ich) insert characters 21313# CSI <n>A (cuu) cursor up n lines 21314# CSI <n>B (cud) cursor down n lines 21315# CSI <n>C (cuu) cursor right n characters 21316# CSI <n>D (cud) cursor left n characters 21317# CSI <n>E cursor down n lines and in first column 21318# CSI <n>F cursor up n lines and in first column 21319# CSI <n>G (hpa) position cursor at column n-1 21320# CSI <n>J (ed) erase in display 21321# CSI <n>K (el) erase in line 21322# CSI <n>L (il) insert line(s) 21323# CSI <n>P (dch) delete characters 21324# CSI <n>S (indn) scroll up n lines 21325# CSI <n>T (rin) scroll down n lines 21326# CSI <n>X (ech) erase characters 21327# CSI <n>Z (cbt) back up n tab stops 21328# CSI <n>` cursor to column n on line 21329# CSI <n>a (cuu) cursor right n characters 21330# CSI <n>d (vpa) cursor to line n 21331# CSI <n>e cursor down n lines and in first column 21332# CSI <n>g (cbt) clear all tabs 21333# CSI <n>z make virtual terminal n active 21334# CSI ?7h (smam) turn automargin on 21335# CSI ?7l (rmam) turn automargin off 21336# CSI s save cursor position 21337# CSI u restore cursor position to saved value 21338# CSI =<c>A set overscan color 21339# CSI =<c>F set normal foreground color 21340# CSI =<c>G set normal background color 21341# CSI =<c>H set reverse foreground color 21342# CSI =<c>I set reverse foreground color 21343# CSI =<c>J set graphic foreground color 21344# CSI =<c>K set graphic foreground color 21345# CSI =<n>g (dispc) display n from alternate graphics character set 21346# CSI =<p>;<d>B set bell parameters 21347# CSI =<s>;<e>C set cursor parameters 21348# CSI =<x>D enable/disable intensity of background color 21349# CSI =<x>E set/clear blink vs. bold background 21350# CSI 7 (sc) (sc) save cursor position 21351# CSI 8 (rc) (rc) restore cursor position to saved value 21352# CSI H (hts) (hts) set tab stop 21353# CSI Q<n><string> define function key string 21354# (string must begin and end with delimiter char) 21355# CSI c (clear) clear screen 21356# 21357# The lack of any specification for attributes in SGR (among other things) 21358# makes this a wretchedly weak standard. The table above is literally 21359# everything iBSC2 has to say about terminal escape sequences; there is 21360# no further discussion of their meaning or how to set the parameters 21361# in these sequences at all. 21362# 21363 21364######## NONSTANDARD CAPABILITY TRANSLATIONS USED IN THIS FILE 21365# 21366# The historical termcap file entries were written primarily in 4.4BSD termcap. 21367# The 4.4BSD termcap set was substantially larger than the original 4.1BSD set, 21368# with the extension names chosen for compatibility with the termcap names 21369# assigned in System V terminfo. There are some variant extension sets out 21370# there. We try to describe them here. 21371# 21372#### XENIX extensions: 21373# 21374# The XENIX extensions include a set of function-key capabilities as follows: 21375# 21376# code XENIX variable name terminfo name name clashes? 21377# ---- ------------------- ------------- ----------------------- 21378# CL key_char_left 21379# CR key_char_right 21380# CW key_change_window create_window 21381# EN key_end kend 21382# HM key_home khome 21383# HP ?? 21384# LD key_delete_line kdl1 21385# LF key_linefeed label_off 21386# NU key_next_unlocked_cell 21387# PD key_page_down knp 21388# PL ?? 21389# PN start_print mc5 21390# PR ?? 21391# PS stop_print mc4 21392# PU key_page_up kpp pulse 21393# RC key_recalc remove_clock 21394# RF key_toggle_ref req_for_input 21395# RT key_return kent 21396# UP key_up_arrow kcuu1 parm_up_cursor 21397# WL key_word_left 21398# WR key_word_right 21399# 21400# The XENIX extensions also include the following character-set and highlight 21401# capabilities: 21402# 21403# XENIX terminfo function 21404# ----- -------- ------------------------------ 21405# GS smacs start alternate character set 21406# GE rmacs end alternate character set 21407# GG :as:/:ae: glitch (analogous to :sg:/:ug:) 21408# bo blink begin blink (not used in /etc/termcap) 21409# be end blink (not used in /etc/termcap) 21410# bb blink glitch (not used in /etc/termcap) 21411# it dim begin dim (not used in /etc/termcap) 21412# ie end dim (not used in /etc/termcap) 21413# ig dim glitch (not used in /etc/termcap) 21414# 21415# Finally, XENIX also used the following forms-drawing capabilities: 21416# 21417# single double type ASCII approximation 21418# ------ ------ ------------- ------------------- 21419# GV Gv vertical line | 21420# GH Gv horizontal line - _ 21421# G1 G5 top right corner _ | 21422# G2 G6 top left corner | 21423# G3 G7 bottom left corner |_ 21424# G4 G8 bottom right corner _| 21425# GD Gd down-tick character T 21426# GL Gl left-tick character -| 21427# GR Gr right-tick character |- 21428# GC Gc middle intersection -|- 21429# GU Gu up-tick character _|_ 21430# 21431# These were invented to take advantage of the IBM PC ROM character set. One 21432# can compose an acsc string from the single-width characters as follows 21433# "j{G4}k{G1}l{G2}m{G3}q{GH}x{GV}t{GR}u{GL}v{GU}w{GD}n{GC}" 21434# When translating a termcap file, ncurses tic will do this automatically. 21435# The double forms characters don't fit the SVr4 terminfo model. 21436# 21437#### AT&T Extensions: 21438# 21439# The old AT&T 5410, 5420, 5425, pc6300plus, 610, and s4 entries used a set of 21440# nonstandard capabilities. Its signature is the KM capability, used to name 21441# some sort of keymap file. EE, BO, CI, CV, XS, DS, FL and FE are in this 21442# set. Comments in the original, and a little cross-checking with other AT&T 21443# documentation, seem to establish that BO=:mr: (start reverse video), DS=:mh: 21444# (start dim), XS=:mk: (secure/invisible mode), EE=:me: (end highlights), 21445# FL=:LO: (enable soft labels), FE=:LF: (disable soft labels), CI=:vi: (make 21446# cursor invisible), and CV=:ve: (make cursor normal). 21447# 21448#### HP Extensions 21449# 21450# The HP library (as of mid-1995, their term.h file version 70.1) appears to 21451# have the System V capabilities up to SVr1 level. After that, it supports 21452# two nonstandard caps meml and memu corresponding to the old termcap :ml:, 21453# :mu: capabilities. After that, it supports caps plab_norm, label_on, 21454# label_off, and key_f11..key_f63 capabilities like SVr4's. This makes the 21455# HP binary format incompatible with SVr4's. 21456# 21457#### IBM Extensions 21458# 21459# There is a set of nonstandard terminfos used by IBM's AIX operating system. 21460# The AIX terminfo library diverged from SVr1 terminfo, and replaces all 21461# capabilities following prtr_non with the following special capabilties: 21462# box[12], batt[12], colb[0123456789], colf[0123456789], f[01234567], kbtab, 21463# kdo, kcmd, kcpn, kend, khlp, knl, knpn, kppn, kppn, kquit, ksel, kscl, kscr, 21464# ktab, kmpf[123456789], apstr, ksf1..ksf10, kf11...kf63, kact, topl, btml, 21465# rvert, lvert. Some of these are identical to XPG4/SVr4 equivalents: 21466# kcmd, kend, khlp, and kf11...kf63. Two others (kbtab and ksel) can be 21467# renamed (to kcbt and kslt). The places in the box[12] capabilities 21468# correspond to acsc chars, here is the mapping: 21469# 21470# box1[0] = ACS_ULCORNER 21471# box1[1] = ACS_HLINE 21472# box1[2] = ACS_URCORNER 21473# box1[3] = ACS_VLINE 21474# box1[4] = ACS_LRCORNER 21475# box1[5] = ACS_LLCORNER 21476# box1[6] = ACS_TTEE 21477# box1[7] = ACS_RTEE 21478# box1[8] = ACS_BTEE 21479# box1[9] = ACS_LTEE 21480# box1[10] = ACS_PLUS 21481# 21482# The box2 characters are the double-line versions of these forms graphics. 21483# The AIX binary terminfo format is incompatible with SVr4's. 21484# 21485#### Iris console extensions: 21486# 21487# HS is half-intensity start; HE is half-intensity end 21488# CT is color terminal type (for Curses & rogue) 21489# CP is color change escape sequence 21490# CZ are color names (for Curses & rogue) 21491# 21492# The ncurses tic utility recognizes HS as an alias for mh <dim>. 21493# 21494#### TC Extensions: 21495# 21496# There is a set of extended termcaps associated with something 21497# called the "Terminal Control" or TC package created by MainStream Systems, 21498# Winfield Kansas. This one also uses GS/GE for as/ae, and also uses 21499# CF for civis and CO for cvvis. Finally, they define a boolean :ct: 21500# that flags color terminals. 21501# 21502######## NCURSES USER-DEFINABLE CAPABILITIES 21503# 21504# Extensions added after ncurses 5.0 generally use the "-x" option of tic and 21505# infocmp to manipulate user-definable capabilities. Those that are intended 21506# for use in either terminfo or termcap use 2-character names. Extended 21507# function keys do not use 2-character names, and are available only with 21508# terminfo. 21509# 21510# As of mid-2012, no other terminfo/termcap implementation than ncurses 21511# supports this extension; termcap libraries can as noted above make limited 21512# use of the feature. 21513# 21514# ncurses makes explicit checks for a few user-definable capabilities: AX, U8, 21515# XM. 21516# 21517#### SCREEN Extensions: 21518# 21519# The screen program uses the termcap interface. It recognizes a few useful 21520# nonstandard capabilities. Those are used in this file. 21521# 21522# AX (bool) Does understand ANSI set default fg/bg color (\E[39m / 21523# \E[49m). 21524# G0 (bool) Terminal can deal with ISO 2022 font selection sequences. 21525# E0 (str) Switch charset 'G0' back to standard charset. 21526# S0 (str) Switch charset 'G0' to the specified charset. 21527# XT (bool) Terminal understands special xterm sequences (OSC, mouse 21528# tracking). 21529# 21530# AX is relatively straightforward; it is interpreted by ncurses to say that 21531# SGR 39/49 reset the terminal's foreground and background colors to their 21532# "default". 21533# 21534# XT is harder, since screen's manpage does not give more details. For that, 21535# we must read screen's source-code. When XT is set, screen assumes 21536# 21537# a) OSC 1 sets the title string, e.g., for the icon. Recent versions of 21538# screen may also set the terminal's name, which is (for xterm) distinct 21539# from the icon name. 21540# b) OSC 20 sets the background pixmap. This is an rxvt feature. 21541# c) OSC 39 and OSC 49 set the default foreground/background colors. Again 21542# this is an rxvt feature. 21543# d) certain mode settings enable the mouse: 9, 1000, 1001, 1002, 1003. 21544# These are from xterm, although xterm accepts mouse codes that may not be 21545# recognized by screen, e.g., 1005, 1006. 21546# e) colors beyond 0..7 are implemented by xterm's aixterm-like 16-color 21547# sequence. However, because screen uses only termcap, the values returned 21548# by Af/Ab are not usable because they rely on expressions that termcap 21549# does not support. Therefore, screen uses a hardcoded string to work 21550# around the limitation. 21551# f) all entries named "*xterm*" or "*rxvt*" have the bce flag set. 21552# 21553# The other ISO-2022 features are rarely used, but provided here to make 21554# screen's termcap features available. 21555# 21556#### XTERM Extensions: 21557# 21558# Most of the xterm extensions are for function-keys. Since patch #94 (in 21559# 1999), xterm has supported shift/control/alt/meta modifiers which produce 21560# additional function-key strings. Some other developers copied the feature, 21561# though they did not follow xterm's lead in patch #167 (in 2002), to make 21562# these key definitions less ambiguous. 21563# 21564# A few terminals provide similar functionality (sending distinct keys when 21565# a modifier is used), including rxvt. 21566# 21567# These are the extended keys defined in this file: 21568# 21569# kDC3 kDC4 kDC5 kDC6 kDC7 kDN kDN3 kDN4 kDN5 kDN6 kDN7 kEND3 kEND4 kEND5 kEND6 21570# kEND7 kHOM3 kHOM4 kHOM5 kHOM6 kHOM7 kIC3 kIC4 kIC5 kIC6 kIC7 kLFT3 kLFT4 21571# kLFT5 kLFT6 kLFT7 kNXT3 kNXT4 kNXT5 kNXT6 kNXT7 kPRV3 kPRV4 kPRV5 kPRV6 kPRV7 21572# kRIT3 kRIT4 kRIT5 kRIT6 kRIT7 kUP kUP3 kUP4 kUP5 kUP6 kUP7 ka2 kb1 kb3 kc2 21573# 21574# Here are the other xterm-related extensions which are used in this file: 21575# 21576# Cr is a string capability which resets the cursor color 21577# Cs is a string capability which sets the cursor color to a given value. 21578# The single string parameter is the color name/number, according to the 21579# implementation. 21580# Ms modifies the selection/clipboard. Its parameters are 21581# p1 = the storage unit (clipboard, selection or cut buffer) 21582# p2 = the base64-encoded clipboard content. 21583# Se resets the cursor style to the terminal power-on default. 21584# Ss is a string capability with one numeric parameter. It is used to set the 21585# cursor style as described by the DECSCUSR function to a block or 21586# underline. 21587# TS is a string capability which acts like "tsl", but uses no parameter and 21588# goes to the first column of the "status line". 21589# XM is a string capability which overrides ncurses's built-in string which 21590# enables xterm mouse mode. 21591# 21592#### Miscellaneous extensions: 21593# 21594# gsbom/grbom are used to enable/disable real bold (not intensity bright) mode. 21595# This was implemented for the Hurd. 21596# E3 clears the terminal's scrollback buffer. This was implemented in the 21597# Linux 3.0 kernel as a security feature. It matches a feature which was 21598# added in xterm patch #107. 21599# U8 is a numeric capability which denotes a terminal emulator which does not 21600# support VT100 SI/SO when processing UTF-8 encoding. Set this to a nonzero 21601# value to enable it. 21602# 21603######## CHANGE HISTORY 21604# 21605# The last /etc/termcap version maintained by John Kunze was 8.3, dated 8/5/94. 21606# Releases 9 and 10 (up until the release of ncurses 4.2 in 1998) were 21607# maintained by Eric S. Raymond as part of the ncurses project. 21608# 21609# This file contains all the capability information present in John Kunze's 21610# last version of the termcap master file, except as noted in the change 21611# comments at end of file. Some information about very ancient obsolete 21612# capabilities has been moved to comments. Some all-numeric names of older 21613# terminals have been retired. 21614# 21615# I changed :MT: to :km: (the 4.4BSD name) everywhere. I commented out some 21616# capabilities (EP, dF, dT, dV, kn, ma, ml, mu, xr, xx) that are no longer 21617# used by BSD curses. 21618# 21619# The 9.1.0 version of this file was translated from my lightly-edited copy of 21620# 8.3, then mechanically checked against 8.3 using Emacs Lisp code written for 21621# the purpose. Unless the ncurses tic implementation and the Lisp code were 21622# making perfectly synchronized mistakes which I then failed to catch by 21623# eyeball, the translation was correct and perfectly information-preserving. 21624# 21625# Major version number bumps correspond to major version changes in ncurses. 21626# 21627# Here is a log of the changes since then: 21628# 21629# 9.1.0 (Wed Feb 1 04:50:32 EST 1995): 21630# * First terminfo master translated from 8.3. 21631# 9.2.0 (Wed Feb 1 12:21:45 EST 1995): 21632# * Replaced Wyse entries with updated entries supplied by vendor. 21633# 21634# 9.3.0 (Mon Feb 6 19:14:40 EST 1995): 21635# * Added contact & status info from G. Clark Brown <clark@sssi.com>. 21636# 9.3.1 (Tue Feb 7 12:00:24 EST 1995): 21637# * Better XENIX keycap translation. Describe TC termcaps. 21638# * Contact and history info supplied by Qume. 21639# 9.3.2 (Sat Feb 11 23:40:02 EST 1995): 21640# * Raided the Shuford FTP site for recent termcaps/terminfos. 21641# * Added information on X3.64 and VT100 standard escape sequences. 21642# 9.3.3 (Mon Feb 13 12:26:15 EST 1995): 21643# * Added a correct X11R6 xterm entry. 21644# * Fixed terminfo translations of padding. 21645# 9.3.4 (Wed Feb 22 19:27:34 EST 1995): 21646# * Added correct acsc/smacs/rmacs strings for vt100 and xterm. 21647# * Added u6/u7/u8/u9 capabilities. 21648# * Added PCVT entry. 21649# 9.3.5 (Thu Feb 23 09:37:12 EST 1995): 21650# * Emacs uses :so:, not :mr:, for its mode line. Fix linux entry 21651# to use reverse-video standout so Emacs will look right. 21652# * Added el1 capability to ansi. 21653# * Added smacs/rmacs to ansi.sys. 21654# 21655# 9.4.0 (Sat Feb 25 16:43:25 EST 1995): 21656# * New mt70 entry. 21657# * Added COPYRIGHTS AND OTHER DELUSIONS. 21658# * Added AT&T 23xx & 500/513, vt220 and vt420, opus3n1+, netronics 21659# smartvid & smarterm, ampex 175 & 219 & 232, 21660# env230, falco ts100, fluke, intertube, superbrain, ncr7901, vic20, 21661# ozzie, trs200, tr600, Tandy & Texas Instruments VDTs, intext2, 21662# screwpoint, fviewpoint, Contel Business Systems, Datamedia Colorscan, 21663# adm36, mime314, ergo4000, ca22851. Replaced att7300, esprit, dd5500. 21664# * Replaced the Perkin-Elmer entries with vendor's official ones. 21665# * Restored the old minimal-ansi entry, luna needs it. 21666# * Fixed some incorrect ip and proportional-padding translations. 21667# 9.4.1 (Mon Feb 27 14:18:33 EST 1995): 21668# * Fix linux & AT386 sgr strings to do A_ALTCHARSET turnoff correctly. 21669# * Make the xterm entry 65 lines again; create xterm25 and xterm24 21670# to force a particular height. 21671# * Added beehive4 and reorganized other Harris entries. 21672# 9.4.2 (Thu Mar 9 01:45:44 EST 1995): 21673# * Merged in DEC's official entries for its terminals. The only old 21674# entry I kept was Doug Gwyn's alternate vt100 (as vt100-avo). 21675# * Replaced the translated BBN Bitgraph entries with purpose-built 21676# ones from AT&T's SVr3. 21677# * Replaced the AT&T entries with AT&T's official terminfos. 21678# * Added teleray 16, vc415, cops10. 21679# * Merged in many individual capabilities from SCO terminfo files. 21680# 9.4.3 (Mon Mar 13 02:37:53 EST 1995): 21681# * Typo fixes. 21682# * Change linux entry so A_PROTECT enables IBM-PC ROM characters. 21683# 9.4.4 (Mon Mar 27 12:32:35 EST 1995): 21684# * Added tty35, Ann Arbor Guru series. vi300 and 550, cg7900, tvi803, 21685# pt210, ibm3164, IBM System 1, ctrm, Tymshare scanset, dt200, adm21, 21686# simterm, citoh and variants. 21687# * Replaced sol entry with sol1 and sol2. 21688# * Replaced Qume QVT and Freedom-series entries with purpose-built 21689# terminfo entries. 21690# * Enhanced vt220, tvi910, tvi924, hpterm, hp2645, adm42, tek 21691# and dg200 entries using caps from from SCO. 21692# * Added the usual set of function-key mappings to ANSI entry. 21693# * Corrected xterm's function-key capabilities. 21694# 9.4.5 (Tue Mar 28 14:27:49 EST 1995): 21695# * Fix in xterm entry, cub and cud are not reliable under X11R6. 21696# 9.4.6 (Thu Mar 30 14:52:15 EST 1995): 21697# * Fix in xterm entry, get the arrow keys right. 21698# * Change some \0 escapes to \200. 21699# 9.4.7 (Tue Apr 4 11:27:11 EDT 1995) 21700# * Added apple (Videx card), adm1a, oadm31. 21701# * Fixed malformed ampex csr. 21702# * Fixed act4, cyb110; they had old-style prefix padding left in. 21703# * Changed mandatory to advisory padding in many entries. 21704# * Replaced HP entries up to hpsub with purpose-built ones. 21705# * Blank rmir/smir/rmdc/smdc capabilities removed. 21706# * Small fixes merged in from SCO entries for lpr, fos, tvi910+, tvi924. 21707# 9.4.8 (Fri Apr 7 09:36:34 EDT 1995): 21708# * Replaced the Ann Arbor entries with SCO's, the init strings are 21709# more efficient (but the entries otherwise identical). 21710# * Added dg211 from Shuford archive. 21711# * Added synertek, apple-soroc, ibmpc, pc-venix, pc-coherent, xtalk, 21712# adm42-nl, pc52, gs6300, xerox820, uts30. 21713# * Pull SCO's padding into vi200 entry. 21714# * Improved capabilities for tvi4107 and other Televideo and Viewpoint 21715# entries merged in from SCO's descriptions. 21716# * Fixed old-style prefix padding on zen50, h1500. 21717# * Moved old superbee entry to superbee-xsb, pulled in new superbee 21718# entry from SCO's description. 21719# * Reorganized the special entries. 21720# * Added lm#0 to cbunix and virtual entries. 21721# 21722# 9.5.0 (Mon Apr 10 11:30:00 EDT 1995): 21723# * Restored cdc456tst. 21724# * Fixed sb1 entry, SCO erroneously left out the xsb glitch. 21725# * Added megatek, beacon, microkit. 21726# * Freeze for ncurses-1.9 release. 21727# 9.5.1 (Fri Apr 21 12:46:42 EDT 1995): 21728# * Added historical data for TAB. 21729# * Comment fixes from David MacKenzie. 21730# * Added the new BSDI pc3 entry. 21731# 9.5.2 (Tue Apr 25 17:27:52 EDT 1995) 21732# * A change in the tic -C logic now ensures that all entries in 21733# the termcap translation will fit in < 1024 bytes. 21734# * Added `bobcat' and `gator' HP consoles and the Nu machine entries 21735# from GNU termcap file. This merges in all their local information. 21736# 9.5.3 (Tue Apr 25 22:28:13 EDT 1995) 21737# * Changed tic -C logic to dump all capabilities used by GNU termcap. 21738# * Added warnings about entries with long translations (restoring 21739# all the GNU termcaps pushes a few over the edge). 21740# 9.5.4 (Wed Apr 26 15:35:09 EDT 1995) 21741# * Yet another tic change, and a couple of entry tweaks, to reduce the 21742# number of long (> 1024) termcap translations back to 0. 21743# 21744# 9.6.0 (Mon May 1 10:35:54 EDT 1995) 21745# * Added kf13-kf20 to Linux entry. 21746# * Regularize Prime terminal names. 21747# * Historical data on Synertek. 21748# * Freeze for ncurses-1.9.1. 21749# 9.6.1 (Sat May 6 02:00:52 EDT 1995): 21750# * Added true xterm-color entry, renamed djm's pseudo-color entry. 21751# * Eliminate whitespace in short name fields, this tanks some scripts. 21752# * Name field changes to shorten some long entries. 21753# * Termcap translation now automatically generates empty rmir/smir 21754# when ich1/ich is present (copes with an ancient vi bug). 21755# * Added `screen' entries from FSF's screen-3.6.2. 21756# * Added linux-nic and xterm-nic entries. 21757# 9.6.2 (Sat May 6 17:00:55 EDT 1995): 21758# * Change linux entry to use smacs=\E[11m and have an explicit acsc, 21759# eliminating some special-case code in ncurses. 21760# 21761# 9.7.0 (Tue May 9 18:03:12 EDT 1995): 21762# * Added vt320-k3, rsvidtx from the Emacs termcap.dat file. I think 21763# that captures everything unique from it. 21764# * Added reorder script generator. 21765# * Freeze for ncurses 1.9.2 release. 21766# 9.7.1 (Thu Jun 29 09:35:22 EDT 1995): 21767# * Added Sean Farley's kspd, flash, rs1 capabilities for linux. 21768# * Added Olaf Siebert's corrections for adm12. 21769# * ansi-pc-color now includes the colors and pairs caps, so that 21770# entries which use it will inherit them automatically. 21771# * The linux entry can now recognize the center (keypad 5) key. 21772# * Removed some junk that found its way into Linux acsc. 21773# 21774# 9.8.0 (Fri Jul 7 04:46:57 EDT 1995): 21775# * Add 50% cut mark as a desperate hack to reduce tic's core usage. 21776# * xterm doesn't try to use application keypad mode any more. 21777# * Freeze for ncurses-1.9.3 release. 21778# 9.8.1 (Thu Jul 19 17:02:12 EDT 1995): 21779# * Added corrected sun entry from vendor. 21780# * Added csr capability to linux entry. 21781# * Peter Wemm says the at386 hpa should be \E[%i%p1%dG, not \E[%p1%dG. 21782# * Added vt102-nsgr to cope with stupid IBM PC `VT100' emulators. 21783# * Some commented-out caps in long entries come back in, my code 21784# for computing string-table lengths had a bug in it. 21785# * pcansi series modified to fit comm-program reality better. 21786# 9.8.2 (Sat Sep 9 23:35:00 EDT 1995): 21787# * BSD/OS actually ships the ibmpc3 bold entry as its console. 21788# * Correct some bad aliases in the pcansi series 21789# * Added entry for QNX console. 21790# * Clean up duplicate long names for use with 4.4 library. 21791# * Change vt100 standout to be normal reverse vide, not bright reverse; 21792# this makes the Emacs status line look better. 21793# 9.8.3 (Sun Sep 10 13:07:34 EDT 1995): 21794# * Added Adam Thompson's VT320 entries, also his dtx-sas and z340. 21795# * Minor surgery, mostly on name strings, to shorten termcap version. 21796# 21797# 9.9.0 (Sat Sep 16 23:03:48 EDT 1995): 21798# * Added dec-vt100 for use with the EWAN emulator. 21799# * Added kmous to xterm for use with xterm's mouse-tracking facility. 21800# * Freeze for 1.9.5 alpha release. 21801# 9.9.1 (Wed Sep 20 13:46:09 EDT 1995): 21802# * Changed xterm lines to 24, the X11R6 default. 21803# 9.9.2 (Sat Sep 23 21:29:21 EDT 1995): 21804# * Added 7 newly discovered, undocumented acsc characters to linux 21805# entry (the pryz{|} characters). 21806# * ncurses no longer steals A_PROTECT. Simplify linux sgr accordingly. 21807# * Correct two typos in the xterm entries introduced in 9.9.1. 21808# * I finally figured out how to translate ko capabilities. Done. 21809# * Added tvi921 entries from Tim Theisen. 21810# * Cleanup: dgd211 -> dg211, adm42-nl -> adm42-nsl. 21811# * Removed mystery tec entry, it was neither interesting nor useful. 21812# * shortened altos3, qvt203, tvi910+, tvi92D, tvi921-g, tvi955, vi200-f, 21813# vi300-ss, att505-24, contel301, dm3045, f200vi, pe7000c, vc303a, 21814# trs200, wind26, wind40, wind50, cdc456tst, dku7003, f110, dg211, 21815# by making them relative to use capabilities 21816# * Added cuf1=^L to tvi925 from deleted variant tvi925a. 21817# * fixed cup in adm22 entry and parametrized strings in vt320-k3. 21818# * added it#8 to entries that used to have :pt: -- tvi912, vi200, 21819# ampex80, 21820# * Translate all home=\E[;H capabilities to home=\E[H, they're 21821# equivalent. 21822# * Translate \E[0m -> \E[m in [rs]mso, [rs]mul, and init strings of 21823# vt100 and ANSI-like terminals. 21824# 9.9.3 (Tue Sep 26 20:11:15 EDT 1995): 21825# * Added it#8 and ht=\t to *all* entries with :pt:; the ncurses tic 21826# does this now, too. 21827# * fviewpoint is gone, it duplicated screwpoint. 21828# * Added hp2627, graphos, graphos-30, hpex, ibmega, ibm8514, ibm8514-c, 21829# ibmvga, ibmvga-c, minix, mm340, mt4520-rv, screen2, screen3, 21830# versaterm, vi500, vsc, vt131, vt340, vt400 entries from UW. 21831# The UW vi50 replaces the old one, which becomes vi50adm, 21832# * No more embedded commas in name fields. 21833# 21834# 9.10.0 (Wed Oct 4 15:39:37 EDT 1995): 21835# * XENIX forms characters in fos, trs16, scoansi become acsc strings, 21836# * Introduced klone+* entries for describing Intel-console behavior. 21837# * Linux kbs is default-mapped to delete for some brain-dead reason. 21838# * -nsl -> -ns. The -pp syntax is obsolete. 21839# * Eliminate [A-Z]* primaries in accordance with SVr4 terminfo docs. 21840# * Make xterm entry do application-keypad mode again. I got complaints 21841# that it was messing up someone's 3270 emulator. 21842# * Added some longname fields in order to avoid warning messages from 21843# older tic implementations. 21844# * According to ctlseqs.ms, xterm has a full vt100 graphics set. Use 21845# it! (This gives us pi, greater than, less than, and a few more.) 21846# * Freeze for ncurses-1.9.6 release. 21847# 9.10.1 (Sat Oct 21 22:18:09 EDT 1995): 21848# * Add xon to a number of console entries, they're memory-mapped and 21849# don't need padding. 21850# * Correct the use dependencies in the ansi series. 21851# * Hand-translate more XENIX capabilities. 21852# * Added hpterm entry for HP's X terminal emulator. 21853# * Added aixterm entries. 21854# * Shortened four names so everything fits in 14 chars. 21855# 21856# 9.11.0 (Thu Nov 2 17:29:35 EST 1995): 21857# * Added ibcs2 entry and info on iBCS2 standard. 21858# * Corrected hpa/vpa in linux entry. They still fail the worm test. 21859# * We can handle the HP meml/memu capability now. 21860# * Added smacs to klone entries, just as documentation. 21861# * Carrected ansi.sys and cit-500 entries. 21862# * Added z39, vt320-k311, v220c, and avatar entries. 21863# * Make pcansi use the ansi.sys invis capability. 21864# * Added DIP switch descriptions for vt100, adm31, tvi910, tvi920c, 21865# tvi925, tvi950, dt80, ncr7900i, h19. 21866# * X3.64 has been withdrawn, change some references. 21867# * Removed function keys from ansi-m entry. 21868# * Corrected ansi.sys entry. 21869# * Freeze for ncurses-1.9.7 release. 21870# 9.11.1 (Tue Nov 6 18:18:38 EST 1995): 21871# * Added rmam/smam capabilities to many entries based on init strings. 21872# * Added correct hpa/vpa to linux. 21873# * Reduced several entries relative to vt52. 21874# 9.11.2 (Tue Nov 7 00:21:06 EST 1995): 21875# * Exiled some utterly unidentifiable custom and homebrew types to the 21876# UFO file; also, obsolete small-screen hardware; also, entries which 21877# look flat-out incorrect, garbled, or redundant. These include the 21878# following entries: carlock, cdc456tst, microkit, qdss, ramtek, tec, 21879# tec400, tec500, ubell, wind, wind16, wind40, wind50, plasma, agile, 21880# apple, bch, daleblit, nucterm, ttywilliams, nuterminal, nu24, bnu, 21881# fnu, nunix-30, nunix-61, exidy, ex3000, sexidy, pc52, sanyo55, 21882# yterm10, yterm11, yterm10nat, aed, aed-ucb, compucolor, compucolor2, 21883# vic20, dg1, act5s, netx, smartvid, smarterm, sol, sol2, dt200, 21884# trs80, trs100, trs200, trs600, xitex, rsvidtx, vid, att2300-x40, 21885# att2350-x40, att4410-nfk, att5410-ns, otty5410, att5425-nl-w, 21886# tty5425-fk, tty5425-w-fk, cita, c108-na, c108-rv-na, c100-rv-na, 21887# c108-na-acs, c108-rv-na-acs, ims950-ns, infotonKAS, ncr7900i-na, 21888# regent60na, scanset-n, tvi921-g, tvi925n, tvi925vbn, tvi925vb, 21889# vc404-na, vc404-s-na, vt420nam, vt420f-nam, vt420pc-nam, vt510nam, 21890# vt510pc-nam, vt520nam, vt525nam, xterm25, xterm50, xterm65, xterms. 21891# * Corrected pcvt25h as suggested by Brian C. Grayson 21892# <bgrayson@pine.ece.utexas.edu>. 21893# 9.11.3 (Thu Nov 9 12:14:40 EST 1995): 21894# * Added kspd=\E[P, kcbt=\E[Z, to linux entry, changed kbs back to ^H. 21895# * Added kent=\EOM to xterm entry. 21896# 21897# 9.11.4 (Fri Nov 10 08:31:35 EST 1995): 21898# * Corrected gigi entry. 21899# * Restored cuf/cud1 to xterm, their apparent bugginess was due to 21900# bad hpa/vpa capabilities. 21901# * Corrected flash strings to have a uniform delay of .2 sec. No 21902# more speed-dependent NUL-padding! 21903# * terminfo capabilities in comments bracketed with <>. 21904# 9.11.5 (Fri Nov 10 15:35:02 EST 1995): 21905# * Replaced pcvt with the 3.31 pcvt entries. 21906# * Freeze for 1.9.7a. 21907# 9.11.6 (Mon Nov 13 10:20:24 EST 1995): 21908# * Added emu entry from the X11R6 contrib tape sources. 21909# 21910# 9.12.0 (Wed Nov 29 04:22:25 EST 1995): 21911# * Improved iris-ansi and sun entries. 21912# * More flash string improvements. 21913# * Corrected wy160 & wy160 as suggested by Robert Dunn 21914# * Added dim to at386. 21915# * Reconciled pc3 and ibmpc3 with the BSDI termcap file. Keith says 21916# he's ready to start using the termcap generated from this one. 21917# * Added vt102-w, vt220-w, xterm-bold, wyse-vp, wy75ap, att4424m, 21918# ln03, lno3-w, h19-g, z29a*, qdss. Made vt200 an alias of vt220. 21919# * Improved hpterm, apollo consoles, fos, qvt101, tvi924. tvi925, 21920# att610, att620, att630, 21921# * Changed hazeltine name prefix from h to hz. 21922# * Sent t500 to the UFI file. 21923# * I think we've sucked all the juice out of BSDI's termcap file now. 21924# * Freeze for ncurses 1.9.8 release 21925# 9.12.1 (Thu Nov 30 03:14:06 EST 1995) 21926# * Unfreeze, linux kbs needed to be fixed. 21927# * Tim Theisen pinned down a bug in the DMD firmware. 21928# 9.12.2 (Thu Nov 30 19:08:55 EST 1995): 21929# * Fixes to ansi and klone capabilities (thank you, Aaron Ucko). 21930# (The broken ones had been shadowed by sgr.) 21931# 9.12.3 (Thu Dec 7 17:47:22 EST 1995): 21932# * Added documentation on ECMA-48 standard. 21933# * New Amiga entry. 21934# 9.12.4 (Thu Dec 14 04:16:39 EST 1995): 21935# * More ECMA-48 stuff 21936# * Corrected typo in minix entry, added pc-minix. 21937# * Corrected khome/kend in xterm (thank you again, Aaron Ucko). 21938# * Added rxvt entry. 21939# * Added 1.3.x color-change capabilities to linux entry. 21940# 9.12.5 (Tue Dec 19 00:22:10 EST 1995): 21941# * Corrected rxvt entry khome/kend. 21942# * Corrected linux color change capabilities. 21943# * NeXT entries from Dave Wetzel. 21944# * Cleaned up if and rf file names (all in /usr/share now). 21945# * Changed linux op capability to avoid screwing up a background color 21946# pair set by setterm. 21947# 9.12.6 (Wed Feb 7 16:14:35 EST 1996): 21948# * Added xterm-sun. 21949# 9.12.7 (Fri Feb 9 13:27:35 EST 1996): 21950# * Added visa50. 21951# 21952# 9.13.0 (Sun Mar 10 00:13:08 EST 1996): 21953# * Another sweep through the Shuford archive looking for new info. 21954# * Added dg100 alias to dg6053 based on a comp.terminals posting. 21955# * Added st52 from Per Persson. 21956# * Added eterm from the GNU Emacs 19.30 distribution. 21957# * Freeze for 1.9.9. 21958# 9.13.1 (Fri Mar 29 14:06:46 EST 1996): 21959# * FreeBSD console entries from Andrew Chernov. 21960# * Removed duplicate Atari st52 name. 21961# 9.13.2 (Tue May 7 16:10:06 EDT 1996) 21962# * xterm doesn't actually have ACS_BLOCK. 21963# * Change klone+color setf/setb to simpler forms that can be 21964# translated into termcap. 21965# * Added xterm1. 21966# * Removed mechanically-generated junk capabilities from cons* entries. 21967# * Added color support to bsdos. 21968# 9.13.3 (Thu May 9 10:35:51 EDT 1996): 21969# * Added Wyse 520 entries from Wm. Randolph Franklin <wrf@ecse.rpi.edu>. 21970# * Created ecma+color, linux can use it. Also added ech to linux. 21971# * Teach xterm about more keys. Add Thomas Dickey's 3.1.2E updates. 21972# * Add descriptions to FreeBSD console entries. Also shorten 21973# some aliases to <= 14 chars for portability. 21974# * Added x68k console 21975# * Added OTbs to several VT-series entries. 21976# 9.13.4 (Wed May 22 10:54:09 EDT 1996): 21977# * screen entry update for 3.7.1 from Michael Alan Dorman. 21978# 9.13.5 (Wed Jun 5 11:22:41 EDT 1996): 21979# * kterm correction due to Kenji Rikitake. 21980# * ACS correction in vt320-kll due to Phillippe De Muyter. 21981# 9.13.6 (Sun Jun 16 15:01:07 EDT 1996): 21982# * Sun console entry correction from J.T. Conklin. 21983# * Changed all DEC VT300 and up terminals to use VT300 tab set 21984# 9.13.7 (Mon Jul 8 20:14:32 EDT 1996): 21985# * Added smul to linux entry (we never noticed it was missing 21986# because of sgr!). 21987# * Added rmln to hp+labels (deduced from other HP entries). 21988# * Added vt100 acsc capability to vt220, vt340, vt400, d800, dt80-sas, 21989# pro350, att7300, 5420_2, att4418, att4424, att4426, att505, vt320-k3. 21990# * Corrected vt220 acsc. 21991# * The klone+sgr and klone+sgr-dumb entries now use klone+acs; 21992# this corresponds to reality and helps prevent some tic warnings. 21993# * Added sgr0 to c101, pcix, vt100-nav, screen2, oldsun, next, altos2, 21994# hpgeneric, hpansi, hpsub, hp236, hp700-wy, bobcat, dku7003, adm11, 21995# adm12, adm20, adm21, adm22, adm31, adm36, adm42, pt100, pt200, 21996# qvt101, tvi910, tvi921, tvi92B, tvi925, tvi950, tvi970, wy30-mc, 21997# wy50-mc, wy100, wyse-vp, ampex232, regent100, viewpoint, vp90, 21998# adds980, cit101, cit500, contel300, cs10, dm80, falco, falco-p, 21999# f1720a, go140, sb1, superbeeic, microb, ibm8512, kt7, ergo4000, 22000# owl, uts30, dmterm, dt100, dt100, dt110, appleII, apple-videx, 22001# lisa, trsII, atari, st52, pc-coherent, basis, m2-man, bg2.0, bg1.25, 22002# dw3, ln03, ims-ansi, graphos, t16, zen30, xtalk, simterm, d800, 22003# ifmr, v3220, wy100q, tandem653, ibmaed. 22004# * Added DWK terminal description. 22005# 9.13.8 (Wed Jul 10 11:45:21 EDT 1996): 22006# * Many entries now have highlights inherited from adm+sgr. 22007# * xterm entry now corresponds to XFree86 3.1.2E, with color. 22008# * xtitle and xtitle-twm enable access to the X status line. 22009# * Added linux-1.3.6 color palette caps in conventional format. 22010# * Added adm1178 terminal. 22011# * Move fos and apollo terminals to obsolete category. 22012# * Aha! The BRL terminals file told us what the Iris extensions mean. 22013# * Added, from the BRL termcap file: rt6221, rt6221-w, northstar, 22014# commodore, cdc721-esc, excel62, osexec. Replaced from the BRL file: 22015# cit500, adm11. 22016# 9.13.9 (Mon Jul 15 00:32:51 EDT 1996): 22017# * Added, from the BRL termcap file: cdc721, cdc721l, cdc752, cdc756, 22018# aws, awsc, zentec8001, modgraph48, rca vp3301/vp3501, ex155. 22019# * Corrected, from BRL termcap file: vi50. 22020# * Better rxvt entry & corrected xterm entries from Thomas Dickey. 22021# 9.13.10 (Mon Jul 15 12:20:13 EDT 1996): 22022# * Added from BRL: cit101e & variants, hmod1, vi200, ansi77, att5620-1, 22023# att5620-s, att5620-s, dg210, aas1901, hz1520, hp9845, osborne 22024# (old osborne moved to osborne-w), tvi970-vb, tvi970-2p, tvi925-hi, 22025# tek4105brl, tek4106brl, tek4107brl,tek4109brl, hazel, aepro, 22026# apple40p, apple80p, appleIIgs, apple2e, apple2e-p, apple-ae. 22027# * Paired-attribute fixes to various terminals. 22028# * Sun entry corrections from A. Lukyanov & Gert-Jan Vons. 22029# * xterm entry corrections from Thomas Dickey. 22030# 9.13.11 (Tue Jul 30 16:42:58 EDT 1996): 22031# * Added t916 entry, translated from a termcap in SCO's support area. 22032# * New qnx entry from Michael Hunter. 22033# 9.13.12 (Mon Aug 5 14:31:11 EDT 1996): 22034# * Added hpex2 from Ville Sulko. 22035# * Fixed a bug that ran the qnx and pcvtXX together. 22036# 9.13.13 (Fri Aug 9 01:16:17 EDT 1996): 22037# * Added dtterm entry from Solaris CDE. 22038# 9.13.14 (Tue Sep 10 15:31:56 EDT 1996): 22039# * corrected pairs#8 typo in dtterm entry. 22040# * added tvi9065. 22041# 9.13.15 (Sun Sep 15 02:47:05 EDT 1996): 22042# * updated xterm entry to cover 3.1.2E's new features. 22043# 9.13.16 (Tue Sep 24 12:47:43 EDT 1996): 22044# * Added new minix entry 22045# * Removed aliases of the form ^[0-9]* for obsolete terminals. 22046# * Commented out linux-old, nobody's using pre-1.2 kernels now. 22047# 9.13.17 (Fri Sep 27 13:25:38 EDT 1996): 22048# * Added Prism entries and kt7ix. 22049# * Caution notes about EWAN and tabset files. 22050# * Changed /usr/lib/tabset -> /usr/share/tabset. 22051# * Added acsc/rmacs/smacs to vt52. 22052# 9.13.18 (Mon Oct 28 13:24:59 EST 1996): 22053# * Merged in Thomas Dickey's reorganization of the xterm entries; 22054# added technical corrections to avoid warning messages. 22055# 9.13.19 (Sat Nov 16 16:05:49 EST 1996): 22056# * Added rmso=\E[27m in Linux entry. 22057# * Added koi8-r support for Linux console. 22058# * Replace xterm entries with canonical ones from XFree86 3.2. 22059# 9.13.20 (Sun Nov 17 23:02:51 EST 1996): 22060# * Added color_xterm from Jacob Mandelson 22061# 9.13.21 (Mon Nov 18 12:43:42 EST 1996): 22062# * Back off the xterm entry to use r6 as a base. 22063# 9.13.22 (Sat Nov 30 11:51:31 EST 1996): 22064# * Added dec-vt220 at Adrian Garside's request. 22065# 22066#-(original-changelog-1996/12/29-to-1998/02/28-by-TD)--------------------------- 22067# 22068# 10.1.0 (Sun Dec 29 02:36:31 EST 1996): withdrawn 22069# * Minor corrections to xterm entries. 22070# * Replaced EWAN telnet entry. 22071# * Dropped the reorder script generator. It was a fossil. 22072# 9.13.23 (Fri Feb 21 16:36:06 EST 1997): 22073# * Replaced minitel-2 entry. 22074# * Added MGR, ansi-nt. 22075# 9.13.24 (Sun Feb 23 20:55:23 EST 1997): 22076# * Thorsten Lockert added termcap `bs' to a lot of types, working from 22077# the 4.4BSD Lite2 file. 22078# 22079# 10.1.1 (Sat May 3 21:41:27 EDT 1997): 22080# * Use setaf/setab consistently with SVr4. 22081# * Remove ech, el1 from cons25w, they do not work in FreeBSD 2.1.5 22082# 10.1.2 (Sat May 24 21:10:57 EDT 1997) 22083# * update xterm-xf86-v32 to match XFree86 3.2A (changes F1-F4) 22084# * add xterm-16color, for XFree86 3.3 22085# 10.1.3 (Sat May 31 12:21:05 EDT 1997) 22086# * correct typo in emu 22087# * correct typo in vt102-w (Robert Wuest) 22088# * make new entry xterm-xf86-v33, restored xterm-xf86-v32. 22089# 10.1.4 (Sun Jun 15 08:29:05 EDT 1997) 22090# * remove ech capability from rxvt (it does the wrong thing) 22091# 10.1.5 (Sat Jun 28 21:34:36 EDT 1997) 22092# * remove spurious newlines from several entries (hp+color, wy50, 22093# wy350, wy370-nk, wy99gt-tek, wy370-tek, ibm3161, tek4205, ctrm, 22094# gs6300) 22095# 10.1.6 (Sat Jul 5 15:08:16 EDT 1997) 22096# * correct rmso capability of wy50-mc 22097# 10.1.7 (Sat Jul 12 20:05:55 EDT 1997) 22098# * add cbt to xterm-xf86-v32 22099# * disentangle some entries from 'xterm', preferring xterm-r6 in case 22100# 'xterm' is derived from xterm-xf86-v32, which implements ech and 22101# other capabilities not in xterm-r6. 22102# * remove alternate character set from kterm entry. 22103# 10.1.8 (Sat Aug 2 18:43:18 EDT 1997) 22104# * correct acsc entries for ACS_LANTERN, which is 'i', not 'I'. 22105# 10.1.9 (Sat Aug 23 17:54:38 EDT 1997) 22106# * add xterm-8bit entry. 22107# 10.1.10 (Sat Oct 4 18:17:13 EDT 1997) 22108# * repair several places where early version of tic replaced \, with \\\, 22109# * make acsc entries canonical form (sorted, uniq). 22110# * modify acsc entries for linux, linux-koi8 22111# * new rxvt entry, from corrected copy of distribution in rxvt 2.21b 22112# * add color, mouse support to kterm. 22113# 10.1.11 (Sat Oct 11 14:57:10 EDT 1997) 22114# * correct wy120 smxon/tbc capabilities which were stuck together. 22115# 10.1.12 (Sat Oct 18 17:38:41 EDT 1997) 22116# * add entry for xterm-xf86-v39t 22117# 10.1.13 (Sat Nov 8 13:43:33 EST 1997) 22118# * add u8,u9 to sun-il description 22119# 10.1.14 (Sat Nov 22 19:59:03 EST 1997) 22120# * add vt220-js, pilot, rbcomm, datapoint entries from esr's 27-jun-97 22121# version. 22122# * add hds200 description (Walter Skorski) 22123# * add EMX 0.9b descriptions 22124# * correct rmso/smso capabilities in wy30-mc and wy50-mc (Daniel Weaver) 22125# * rename xhpterm back to hpterm. 22126# 10.1.15 (Sat Nov 29 19:21:59 EST 1997) 22127# * change initc in linux-c-nc to use 0..1000 range. 22128# 10.1.16 (Sat Dec 13 19:41:59 EST 1997) 22129# * remove hpa/vpa from rxvt, which implements them incorrectly. 22130# * add sgr0 for rxvt. 22131# * remove bogus smacs/rmacs from EMX descriptions. 22132# 10.1.17 (Sat Dec 20 17:54:10 EST 1997) 22133# * revised entry for att7300 22134# 10.1.18 (Sat Jan 3 17:58:49 EST 1998) 22135# * use \0 rather than \200. 22136# * rename rxvt-color to rxvt to match rxvt 2.4.5 distribution. 22137# 10.1.19 (Sat Jan 17 14:24:57 EST 1998) 22138# * change xterm (xterm-xf86-v40), xterm-8bit rs1 to use hard reset. 22139# * rename xterm-xf86-v39t to xterm-xf86-v40 22140# * remove bold/underline from sun console entries since they're not 22141# implemented. 22142# 10.1.20 (Sat Jan 24 11:02:51 EST 1998) 22143# * add beterm entry (Fred Fish) 22144# * add irix-color/xwsh entry. 22145# * turn ncv off for linux. 22146# 10.1.21 (Sat Jan 31 17:39:16 EST 1998) 22147# * set ncv for FreeBSD console (treat colors with reverse specially). 22148# * remove sgr string from qnx based on report by Xiaodan Tang 22149# 10.1.22 (Wed Feb 11 18:40:12 EST 1998) 22150# * remove spurious commas from descriptions 22151# * correct xterm-8bit to match XFree86 3.9Ad F1-F4. 22152# 10.1.23 (Sat Feb 28 17:48:38 EST 1998) 22153# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc, 22154# apparently based on cp-866). 22155# 22156#-(replaced-changelog-1998/02/28-by-ESR)---------------------------------------- 22157# 22158# 9.13.23 (Fri Feb 21 16:36:06 EST 1997): 22159# * Replaced minitel-2 entry. 22160# * Added MGR, ansi-nt. 22161# * Minor corrections to xterm entries. 22162# * Replaced EWAN telnet entry. 22163# * Dropped the reorder script generator. It was a fossil. 22164# 9.13.24 (Sun Feb 23 20:55:23 EST 1997): 22165# * Thorsten Lockert added termcap `bs' to a lot of types, working from 22166# the 4.4BSD Lite2 file. 22167# 9.13.25 (Fri Jun 20 12:33:36 EDT 1997): 22168# * Added Datapoint 8242, pilot, ansi_psx, rbcomm, vt220js. 22169# * Updated iris-ansi; corrected vt102-w. 22170# * Switch base xterm entry to 3.3 level. 22171# 9.13.26 (Mon Jun 30 22:45:45 EDT 1997) 22172# * Added basic4. 22173# * Removed rmir/smir from tv92B. 22174# 22175# 10.2.0 (Sat Feb 28 12:47:36 EST 1998): 22176# * add hds200 description (Walter Skorski) 22177# * add beterm entry (Fred Fish) 22178# * add Thomas Dickey's xterm-xf86-v40, xterm-8bit, xterm-16color, 22179# iris-color entries. 22180# * add emx entries. 22181# * Replaced unixpc entry with Benjamin Sittler's corrected version. 22182# * Replaced xterm/rxvt/emu/syscons entries with Thomas Dickey's 22183# versions. 22184# * remove sgr string from qnx based on report by Xiaodan Tang 22185# * Added u8/u9, removed rmul/smul from sun-il. 22186# * 4.2 tic displays \0 rather than \200. 22187# * add linux-koi8r to replace linux-koi8 (which uses a corrupt acsc, 22188# apparently based on cp-866). 22189# * Merged in Pavel Roskin's acsc for linux-koi8 22190# * Corrected some erroneous \\'s to \. 22191# * 4.2 ncurses has been changed to use setaf/setab, consistent w/SysV. 22192# * II -> ii in pcvtXX, screen, xterm. 22193# * Removed \n chars following ANSI escapes in sgr & friends. 22194# * Updated Wyse entries. 22195# * h19 corrections from Tim Pierce. 22196# * Noted that the dm2500 has both ich and smir. 22197# * added pccons for the Alpha under OSF/1. 22198# * Added Sony NEWS workstation entries and cit101e-rv. 22199# * Reverted `amiga'; to Kent Polk's version, as I'm told 22200# the Verkuil entry messes up with Amiga Telnet. 22201# 10.2.1 (Sun Mar 8 18:32:04 EST 1998): 22202# * Corrected attributions in 10.2.0 release notes. 22203# * Scanned the Shuford archive for new terminfos and information. 22204# * Removed sgr from qnx entry (Thomas Dickey). 22205# * Added entries for ICL and Kokusai Data Systems terminals. 22206# * Incorporated NCR terminfos from the Boundless Technology FTP site. 22207# * Incorporated att700 from the Boundless Technology FTP site. 22208# * Miscellaneous contact-address and Web-page updates. 22209# 22210#-(changelog-beginning-ncurses-4.2)--------------------------------------------- 22211# 22212# 1998/5/9 22213# * add nxterm and xterm-color terminfo description (request by Cristian 22214# Gafton <gafton@redhat.com>). 22215# * modify rxvt terminfo description to clear alternate screen before 22216# switching back to normal screen, for compatibility with applications 22217# which use xterm (reported by Manoj Kasichainula <manojk@io.com>). 22218# * modify linux terminfo description to reset color palette (reported 22219# by Telford Tendys <telford@eng.uts.edu.au>). 22220# 22221# 1998/7/4 22222# * merge changes from current XFree86 xterm terminfo descriptions. 22223# 22224# 1998/7/25 22225# * Added minitel1 entries from Alexander Montaron. 22226# * Added qnxt2 from Federico Bianchi. 22227# * Added arm100 terminfo entries from Dave Millen. 22228# 22229# 1998/8/6 22230# * Added ncsa telnet entries from Francesco Potorti 22231# 22232# 1998/8/15 22233# * modify ncsa telnet entry to reflect color, other capabilities based on 22234# examination of the source code - T.Dickey. 22235# 22236# 1998/8/22 22237# * Corrected some erroneous \\'s to \ (eterm, osborne) - TD. 22238# 22239# 1998/8/29 22240# * Added Francesco Potorti's tuned Wyse 99 entries. 22241# * dtterm enacs correction from Alexander V. Lukyanov. 22242# * Add ncsa-ns, ncsa-m-ns and ncsa-m entries from esr version. 22243# * correct a typo in icl6404 entry. 22244# * add xtermm and xtermc 22245# 22246# 1998/9/26 22247# * format most %'char' sequences to %{number} 22248# * adapt IBM AIX 3.2.5 terminfo - T.Dickey 22249# * merge Data General terminfo from Hasufin <hasufin@vidnet.net> - TD 22250# 22251# 1998/10/10 22252# * update xterm-xfree86 to current (patch 84), for is2/rs2 changes - TD 22253# * correct initialization string in xterm-r5, add misc other features 22254# to correspond with xterm patch 84 - TD 22255# 22256# 1998/12/19 22257# * update xterm-xfree86 to current (patch 90), smcur/rmcur changes - TD 22258# * add Mathew Vernon's mach console entries 22259# * corrections for ncsa function-keys (report by Larry Virden) 22260# 22261# 1998/12/19 22262# * change linux to use ncv#2, since underline does not work with color - TD 22263# 22264# 1999/1/9 22265# * add kbt to iris-ansi, document other shift/control functionkeys - TD 22266# * correct iris-ansi and iris-ansi-ap with respect to normal vs keypad 22267# application modes, change kent to use the correct keypad code - TD 22268# 22269# 1999/1/10 22270# * add entry for Tera Term - TD 22271# 22272# 1999/1/23 22273# * minor improvements for teraterm entry - TD 22274# * rename several entries used by BSDI: bsdos to bsdos-pc-nobold, 22275# and bsdos-bold to bsdos-pc (Jeffrey C Honig) 22276# 22277# 1999/2/20 22278# * resolve ambiguity of kend/kll/kslt and khome/kfnd/kich1 strings in 22279# xterm and ncsa entries by removing the unneeded ones. Note that 22280# some entries will return kend & khome versus kslt and kfnd, for 22281# PC-style keyboards versus strict vt220 compatiblity - TD 22282# 22283# 1999/3/13 22284# * adjust xterm-xfree86 khome/kend to match default PC-style keyboard 22285# tables - TD 22286# * add 'crt' entry - TD 22287# * correct typos in 'linux-c' entry - TD 22288# 22289# 1999/3/14 22290# * update entries for BSD/OS console to use klone+sgr and klone+color 22291# (Jeffrey C Honig) 22292# 22293# 1999/3/27 22294# * adjust xterm-xfree86 miscellaneous keypad keys, as per patch #94 - TD. 22295# 22296# 1999/4/10 22297# * add linux-lat, from RedHat patches to ncurses 4.2 22298# 22299# 1999/4/17 22300# * add complete set of default function-key definitions for scoansi - TD. 22301# 22302# 1999/7/3 22303# * add cnorm, cvvis for Linux 2.2 kernels 22304# 22305# 1999/7/24 22306# * add kmous to xterm-r5 -TD 22307# * correct entries xterm+sl and xterm+sl-twm, which were missing the 22308# parent "use" clause -TD 22309# 22310# 1999/7/31 22311# * corrected cnorm, added el1 in 'screen' description -TD 22312# 22313# 1999/8/14 22314# * add ms-vt100 -TD 22315# 22316# 1999/8/21 22317# * corrections to beterm entry -TD 22318# 22319# 1999/8/28 22320# * add cygwin entry -TD 22321# 22322# 1999/9/4 22323# * minor corrections for beterm entry -TD 22324# 22325# 1999/9/18 22326# * add acsc string to HP 70092 terminfo entry -Joerg Wunsch 22327# 22328# 1999/9/25 22329# * add amiga-8bit entry 22330# * add console entries from NetBSD: ofcons, wsvt25, wsvt25m, rcons, 22331# rcons-color, based on 22332# ftp://ftp.netbsd.org/pub/NetBSD/NetBSD-current/src/share/termcap/termcap.src 22333# * add alias for iris-ansi-net 22334# 22335# 1999/10/2 22336# * corrected scoansi entry's acsc, some function keys, add color -TD 22337# 22338# 1999/10/23 22339# * add cnorm, cvvis to cons25w, and modify ncv to add 'dim' -TD 22340# * reorder ncsa entries to make ncsa-vt220 use the alternate function 22341# key mapping, leaving Potorti's entries more like he named them -TD 22342# * remove enter/exit am-mode from cygwin -TD 22343# 22344# 1999/10/30 22345# * correct typos in several entries (missing '[' from CSI): 22346# mgr-sun, ncsa-m, vt320-k3, att505, avt-ns, as well as smir/rmir 22347# strings for avt-ns -TD 22348# * add 'dim' to ncv mask for linux (report by Klaus Weide). 22349# 22350# 1999/11/27 22351# * correct kf1-kf4 in xterm-r6 which were vt100-style PF1-PF4 -TD 22352# * add hts to xterm-r6, and u6-u9 to xterm-r5 -TD 22353# * add xterm-88color and xterm-256color -TD 22354# 22355# 1999/12/4 22356# * add "obsolete" termcap strings -TD 22357# * add kvt and gnome entries -TD 22358# 22359# 1999/12/11 22360# * correct cup string for regent100 -TD 22361# 22362# 2000/1/1 22363# * update mach, add mach-color based on Debian diffs for ncurses 5.0 -TD 22364# * add entries for xterm-hp, xterm-vt220, xterm-vt52 and xterm-noapp -TD 22365# * change OTrs capabilities to rs2 -TD 22366# * add obsolete and extended capabilities to 'screen' -TD 22367# 22368# 2000/1/5 22369# * remove kf0 from rxvt, vt520, vt525 and ibm5151 since it conflicts 22370# with kf10 -TD 22371# * updated xterm-xf86-v40, making kdch1 correspond to vt220 'Remove', 22372# and adding kcbt -TD 22373# 22374# 2000/1/12 22375# * remove incorrect khome/kend from xterm-xf86-v333, which was based on 22376# nonstandard resource settings -TD 22377# 22378# 2000/2/26 22379# * minor fixes for xterm-*, based on Debian #58530 -TD 22380# 22381# 2000/3/4 22382# * add several terminal types from esr's "11.0", as well as comments. 22383# bq300*, dku7102-old, dku7202, hft, lft, pcmw, pmcons, tws*, vip*, 22384# vt220-8bit, vt220-old, wy85-8bit 22385# 22386# 2000/3/18 22387# * add several terminal types from esr's "11.0.1" (ansi-*). 22388# * update OTxx capabilities for changes on 2000/3/4. 22389# * revert part of vt220 change (request by Todd C Miller for OpenBSD) 22390# 22391# 2000/3/26 22392# * move screen's AX extension to ecma+color, modify several entries to 22393# use that, adjusting ncv as needed -TD 22394# 22395# 2000/4/8 22396# * add bsdos-pc-m, bsdos-pc-mono (Jeffrey C Honig) 22397# * correct spelling error in entry name: bq300-rv was given as bg300-rv 22398# in esr's version. 22399# 22400# 2000/4/15 22401# * add cud, ech, etc., to beterm based on feedback from Rico Tudor -TD 22402# * correct color definition for ibm3164, make minor changes to other 22403# IBM terminal definitions based on recent terminfo descriptions -TD 22404# 22405# 2000/4/22 22406# * add mgterm, from NetBSD -TD 22407# * add alias sun-cgsix for sun-ss5 as per NetBSD 22408# * change cons25w to use rs2 for reset rather than rs1 -TD 22409# * add rc/sc to aixterm based on manpage -TD 22410# 22411# 2000/5/13 22412# * remove ncv from xterm-16color, xterm-256color 22413# 22414# 2000/6/10 22415# * add kmous capability to linux to use Joerg Schoen's gpm patch. 22416# 22417# 2000/7/1 22418# * add Eterm (Michael Jennings) 22419# 22420# 2000-07-18 22421# * add amiga-vnc entry. 22422# 22423# 2000-08-12 22424# * correct description of Top Gun Telnet. 22425# * add kterm-color 22426# 22427# 2000-08-26 22428# * add qansi* entries from QNX ftp site. 22429# 22430# 2000-09-16 22431# * add Matrix Orbital entries by Eric Z. Ayers). 22432# * add xterm-basic, xterm-sco entries, update related entries to XFree86 22433# 4.0.1c -TD 22434# 22435# 2000-09-17 22436# * add S0, E0 extensions to screen's entry -TD 22437# 22438# 2000-09-23 22439# * several corrections based on tic's new parameter-checking code -TD 22440# * modify xterm-r6 and similar rs2 sequences which had \E7...\E8 22441# bracketing sequences that reset video attributes (\E8 would restore 22442# them) -TD 22443# 22444# 2000-11-11 22445# * rename cygwin to cygwinB19, adapt newer entry from Earnie Boyd -TD 22446# 22447# 2000-12-16 22448# * improved scoansi, based on SCO man-page, and testing console, 22449# scoterm with tack -TD 22450# 22451# 2001-01-27 22452# * modify kterm to use acsc via SCS controls. 22453# 22454# 2001-02-10 22455# * screen 3.9.8 allows xterm mouse controls to pass-through 22456# 22457# 2001-03-11 22458# * remove spurious "%|" from some xterm entries. 22459# 22460# 2001-03-31 22461# * modify 'screen' khome/kend to match screen 3.09.08 22462# * add examples of 'screen' customization (screen.xterm-xfree86, 22463# screen.xterm-r6, screen.teraterm) -TD 22464# 22465# 2001-04-14 22466# * correct definitions of shifted editing keys for xterm-xfree86 -TD 22467# * add "Apple_Terminal" entries -Benjamin Sittler 22468# * remove time-delays from "Apple_Terminal" entries -TD 22469# * make sgr entries time-delays consistent with individual caps -TD 22470# 22471# 2001-05-05 22472# * corrected/updated screen.xterm-xfree86 22473# 22474# 2001-05-19 22475# * ELKS descriptions, from Federico Bianchi 22476# * add u6 (CSR) to Eterm (Michael Jennings). 22477# 22478# 2001-07-21 22479# * renamed "Apple_Terminal" entries to "nsterm" to work with Solaris's 22480# tic which handles names no longer than 14 characters. Add 22481# corresponding descriptions for the Darwin PowerPC console named 22482# "xnuppc" -Benjamin Sittler 22483# 22484# 2001-09-01 22485# * change kbs in mach entries to ^? (Marcus Brinkmann). 22486# 22487# 2001-11-17 22488# * add "putty" entry -TD 22489# * updated "Apple_Terminal" entries -Benjamin Sittler 22490# 22491# 2001-11-24 22492# * add ms-vt100-color entry -TD 22493# * add "konsole" entries -TD 22494# 22495# 2001-12-08 22496# * update gnome entry to Redhat 7.2 -TD 22497# 22498# 2002-05-25 22499# * add kf13-kf48 strings to cons25w -TD 22500# * add pcvt25-color entry -TD 22501# * changed a few /usr/lib/tabset -> /usr/share/tabset. 22502# * improve some features of scoansi entry based on SCO's version -TD 22503# * add scoansi-new entry corresponding to OpenServer 5.0.6 22504# 22505# 2002-06-15 22506# * add kcbt to screen entry -TD 22507# 22508# 2002-06-22 22509# * add rxvt-16color, ibm+16color, mvterm entries -TD 22510# 22511# 2002-09-28 22512# * split out linux-basic entry, making linux-c inherit from that, and 22513# in turn linux (with cnorm, etc) inherit from linux-c-nc to reflect 22514# the history of this console type -TD 22515# * scaled the linux-c terminfo entry to match linux-c-nc, i.e., the 22516# r/g/b parameters of initc are in the range 0 to 1000 -TD 22517# 22518# 2002-10-05 22519# * minor fix for scale-factor of linux-c and linux-c-nc -TD 22520# 22521# 2002-11-09 22522# * split-out vt100+keypad and vt220+keypad, fix interchanged ka3/kb2 22523# in the latter -TD 22524# 22525# 2002-11-16 22526# * add entries for mterm (mterm, mterm-ansi, decansi) -TD 22527# * ncr260wy350pp has only 16 color pairs -TD 22528# * add sun-type4 from NetBSD -TD 22529# * update xterm-xfree86 to current (patch 170) -TD 22530# * add screen-bce, screen-s entries -TD 22531# * add xterm-1002, xterm-1003 entries -TD 22532# 22533# 2003-01-11 22534# * update homepage for Top Gun Telnet/SSH 22535# 22536# 2003-01-25 22537# * reduce duplication in emx entries, added emx-base -TD 22538# 22539# 2003-05-24 22540# * corrected acs for screen.teraterm -TD 22541# * add tkterm entry -TD 22542# 22543# 2003-07-15 22544# * cygwin changes from Charles Wilson: 22545# misc/terminfo.src (nxterm|xterm-color): make xterm-color 22546# primary instead of nxterm, to match XFree86's xterm.terminfo 22547# usage and to prevent circular links. 22548# (rxvt): add additional codes from rxvt.org. 22549# (rxvt-color): new alias 22550# (rxvt-xpm): new alias 22551# (rxvt-cygwin): like rxvt, but with special acsc codes. 22552# (rxvt-cygwin-native): ditto. rxvt may be run under XWindows, or 22553# with a "native" MSWin GUI. Each takes different acsc codes, 22554# which are both different from the "normal" rxvt's acsc. 22555# (cygwin): cygwin-in-cmd.exe window. Lots of fixes. 22556# (cygwinDBG): ditto. 22557# 22558# 2003-09-27 22559# * update gnome terminal entries -TD 22560# 22561# 2003-10-04 22562# * add entries for djgpp 2.03 and 2.04 -TD 22563# 22564# 2003-10-25 22565# * add alias for vtnt -TD 22566# * update xterm-xfree86 for XFree86 4.4 -TD 22567# 22568# 2003-11-22 22569# * add linux-vt (Andrey V Lukyanov) 22570# 22571# 2003-12-20 22572# * add screen.linux -TD 22573# 22574# 2004-01-10 22575# * revised/improved entries for tvi912b, tvi920b (Benjamin Sittler) 22576# 22577# 2004-01-17 22578# * add OpenNT/Interix/SFU entries (Federico Bianchi) 22579# * add vt100+ and vt-utf8 entries -TD 22580# * add uwin entry -TD 22581# 22582# 2004-03-27 22583# * add sgr strings to several common entries lacking them, e.g., 22584# screen, to make the entries more portable -TD 22585# * remove cvvis from rxvt entry, since it is the same as cnorm -TD 22586# * similar fixups for cvvis/cnorm various entries -TD 22587# 22588# 2004-05-22 22589# * remove 'ncv' from xterm-256color (patch 188) -TD 22590# 22591# 2004-06-26 22592# * add mlterm -TD 22593# * add xterm-xf86-v44 -TD 22594# * modify xterm-new aka xterm-xfree86 to accommodate luit, which relies 22595# on G1 being used via an ISO-2022 escape sequence (report by 22596# Juliusz Chroboczek) -TD 22597# * add 'hurd' entry -TD 22598# 22599# 2004-07-03 22600# * make xterm-xf86-v43 derived from xterm-xf86-v40 rather than 22601# xterm-basic -TD 22602# * align with xterm #192's use of xterm-new -TD 22603# * update xterm-new and xterm-8bit for cvvis/cnorm strings -TD 22604# * make xterm-new the default "xterm" -TD 22605# 22606# 2004-07-10 22607# * minor fixes for emu -TD 22608# * add emu-220 22609# * add rmam/smam to linux (Trevor Van Bremen) 22610# * change wyse acsc strings to use 'i' map rather than 'I' -TD 22611# * fixes for avatar0 -TD 22612# * fixes for vp3a+ -TD 22613# 22614# 2004-07-17 22615# * add xterm-pc-fkeys -TD 22616# * review/update gnome and gnome-rh90 entries (prompted by 22617# Redhat Bugzilla #122815) -TD 22618# * review/update konsole entries -TD 22619# * add sgr, correct sgr0 for kterm and mlterm -TD 22620# * correct tsl string in kterm -TD 22621# 22622# 2004-07-24 22623# * make ncsa-m rmacs/smacs consistent with sgr -TD 22624# * add sgr, rc/sc and ech to syscons entries -TD 22625# * add function-keys to decansi -TD 22626# * add sgr to mterm-ansi -TD 22627# * add sgr, civis, cnorm to emu -TD 22628# * correct/simplify cup in addrinfo -TD 22629# * corrections for gnome and konsole entries 22630# (Redhat Bugzilla #122815) -Hans de Goede 22631# * modify DEC entries (vt220, etc), to add sgr string, and to use 22632# ISO-2022 strings for rmacs/smacs -TD 22633# 22634# 2004-07-31 22635# * rename xterm-pc-fkeys to xterm+pcfkeys -TD 22636# 22637# 2004-08-07 22638# * improved putty entry -Robert de Bath 22639# 22640# 2004-08-14 22641# * remove dch/dch1 from rxvt because they are implemented inconsistently 22642# with the common usage of bce/ech -TD 22643# * remove khome from vt220 (vt220's have no home key) -TD 22644# * add rxvt+pcfkeys -TD 22645# 22646# 2004-08-21 22647# * modify several entries to ensure xterm mouse and cursor visibility 22648# are reset in rs2 string: hurd, putty, gnome, konsole-base, mlterm, 22649# Eterm, screen. (The xterm entries are left alone - old ones for 22650# compatibility, and the new ones do not require this change) -TD 22651# 22652# 2004-08-28 22653# * add morphos entry -Pavel Fedin 22654# * modify amiga-8bit to add khome/kend/knp/kpp -Pavel Fedin 22655# * corrected \E[5?l to \E[?5l in vt320 entries -TD 22656# 22657# 2004-11-20 22658# * update wsvt25 entry -TD 22659# 22660# 2005-01-29 22661# * update pairs for xterm-88color and xterm-256color to reflect the 22662# ncurses extended-color support -TD 22663# 22664# 2005-02-26 22665# * modify sgr/sgr0 in xterm-new to improve tgetent's derived "me" -TD 22666# * add aixterm-16color to demonstrate 16-color capability -TD 22667# 22668# 2005-04-23 22669# * add media-copy to vt100 -TD 22670# * corrected acsc string for vt52 -TD 22671# 22672# 2005-04-30 22673# * add kUP, kDN (user-defined shifted up/down arrow) definitions for 22674# xterm-new -TD 22675# * add kUP5, kUP6, etc., for xterm-new and rxvt -TD 22676# 22677# 2005-05-07 22678# * re-corrected acsc string for vt52 -TD 22679# 22680# 2005-05-28 22681# * corrected sun-il sgr string which referred to bold and underline -TD 22682# * add sun-color entry -TD 22683# 22684# 2005-07-23 22685# * modify sgr0 in several entries to reset alternate-charset as in the 22686# sgr string -TD 22687# * modify sgr string of prism9 to better match the individual 22688# attributes -TD 22689# 22690# 2005-10-15 22691# * correct order of use= in rxvt-basic -TD 22692# 22693# 2005-10-26 22694# * use kind/kri as shifted up/down cursor keys for xterm-new -TD 22695# 22696# 2005-11-12 22697# * other minor fixes to cygwin based on tack -TD 22698# * correct smacs in cygwin (report by Baurzhan Ismagulov). 22699# 22700# 2006-02-18 22701# * add nsterm-16color entry -TD 22702# * remove ncv flag from xterm-16color -TD 22703# * remove setf/setb from xterm-256color to match xterm #209 -TD 22704# * update mlterm entry to 2.9.2 -TD 22705# 22706# 2006-02-25 22707# * fixes to make nsterm-16color match report 22708# by Christian Ebert -Alain Bench 22709# 22710# 2006-04-22 22711# * add xterm+256color building block -TD 22712# * add gnome-256color, putty-256color, rxvt-256color -TD 22713# 22714# 2006-05-06 22715# * add hpterm-color -TD 22716# 22717# 2006-06-24 22718# * add xterm+pcc0, xterm+pcc1, xterm+pcc2, xterm+pcc3 -TD 22719# * add gnome-fc5 (prompted by GenToo #122566) -TD 22720# * remove obsolete/misleading comments about kcbt on Linux -Alain Bench 22721# * improve xterm-256color by combining the ibm+16color setaf/setab 22722# strings with SGR 48. The setf/setb strings also are cancelled here 22723# rather than omitted so derived entries will cancel those also -Alain 22724# Bench 22725# 22726# 2006-07-01 22727# * add some notes regarding copyright to terminfo.src -TD 22728# * use rxvt+pcfkeys in Eterm -TD 22729# * remove km and flash from gnome, Eterm and rxvt since they do not work 22730# as one would expect (km sends ESC rather than setting the 8th bit 22731# of the key) -TD 22732# * add/use ansi+enq, vt100+enq and vt102+enq -TD 22733# * add konsole-solaris -TD 22734# 22735# 2006-07-22 22736# * update xterm-sun and xterm-sco entries to match xterm #216 -TD 22737# * modify is2/rs2 strings for xterm-r6 as per fix in xterm #148 -TD 22738# * modify xterm-24 to inherit from "xterm" -TD 22739# * add xiterm entry -TD 22740# * add putty-vt100 entry -TD 22741# * corrected spelling of Michael A Dorman's name, prompted by 22742# http://www.advogato.org/person/mdorman/diary.html -TD 22743# 22744# 2006-08-05 22745# * add xterm+pcf0, xterm+pcf2 from xterm #216 -TD 22746# * update xterm+pcfkeys to match xterm #216 -TD 22747# 22748# 2006-08-17 22749# * make descriptions of xterm entries consistent with its terminfo -TD 22750# 22751# 2006-08-26 22752# * add xfce, mgt -TD 22753# 22754# 2006-09-02 22755# * correct acsc string in kterm -TD 22756# 22757# 2006-09-09 22758# * add kon entry -TD 22759# * remove invis from linux and related entries, add klone+sgr8 for those 22760# that implement the feature (or have not been shown to lack it) -TD 22761# 22762# 2006-09-23 22763# * add ka2, kb1, kb3, kc2 to vt220-keypad as an extension -TD 22764# * minor improvements to rxvt+pcfkeys -TD 22765# 22766# 2006-09-30 22767# * fix a few typos in if/then/else expressions -TD 22768# 22769# 2006-10-07 22770# * add several GNU Screen variations with 16- and 256-colors, and 22771# status line (Alain Bench). 22772# 22773# 2007-03-03 22774# * add Newbury Data entries (Jean-Charles Billaud). 22775# 22776# 2007-06-10 22777# * corrected xterm+pcf2 modifiers for F1-F4, match xterm #226 -TD 22778# 22779# 2007-07-14 22780# * restore section of pre-ncurses-4.2 changelog to fix attribution -TD 22781# * add konsole-256color entry -TD 22782# 22783# 2007-08-18 22784# * add 9term entry (request by Juhapekka Tolvanen) -TD 22785# 22786# 2007-10-13 22787# * correct kIC in rxvt+pcfkeys (prompted by Debian #446444) -TD 22788# * add shift-control- and control-modified keys for rxvt editing 22789# keypad -TD 22790# * update mlterm entry to 2.9.3 -TD 22791# * add mlterm+pcfkeys -TD 22792# 22793# 2007-10-20 22794# * move kLFT, kRIT, kind and kri capabilities from xterm-new to 22795# xterm+pcc0, etc., to make the corresponding building blocks reflect 22796# xterm's capabilities -TD 22797# * add mrxvt entry -TD 22798# * add xterm+r6f2, use in mlterm and mrxvt entries -TD 22799# 22800# 2007-11-03 22801# * correct acsc strings for h19 and z100 (Benjamin Sittler) 22802# 22803# 2007-11-11 22804# * use xterm-xf86-v44 for "xterm-xfree86", reflecting changes to 22805# xterm starting with patch #216 -TD 22806# * make legacy xterm entries such as xterm-24 inherit from xterm-old, 22807# to match xterm #230 -TD 22808# * extend xterm+pccX entries to match xterm #230 -TD 22809# * add xterm+app, xterm+noapp, from xterm #230 -TD 22810# * add/use xterm+pce2 from xterm #230, in xterm+pcfkeys -TD 22811# 22812# 2008-04-19 22813# * add screen.rxvt -TD 22814# 22815# 2008-04-28 22816# * add screen+fkeys (prompted by Debian #478094) -TD 22817# 22818# 2008-06-28 22819# * add screen.mlterm -TD 22820# * improve mlterm and mlterm+pcfkeys -TD 22821# 22822# 2008-08-23 22823# * add Eterm-256color, Eterm-88color -TD 22824# * add rxvt-88color -TD 22825# 22826# 2008-10-12 22827# * add teraterm4.59 entry, use that as primary teraterm entry, rename 22828# original to teraterm2.3 -TD 22829# * update "gnome" to 2.22.3 -TD 22830# * update "konsole" to 1.6.6 -TD 22831# * add "aterm" -TD 22832# * add "linux2.6.26" -TD 22833# 22834# 2008-11-15 22835# * change several \E[2g (clear tab at current column) to \E[3g 22836# (clear all tabs) to match definition for tbc capability -TD 22837# 22838# 2008-11-29 22839# * add eterm-color -TD 22840# 22841# 2009-01-10 22842# * add screen.Eterm -TD 22843# 22844# 2009-03-28 22845# * correct typo in pfkey of ansi.sys-old 22846# (report by Kalle Olavi Niemitalo) 22847# * move function- and cursor-keys from emx-base to ansi.sys, and create 22848# a pfkey capability which handles F1-F48 -TD 22849# 22850# 2009-05-02 22851# * add vwmterm entry (Bryan Christ) 22852# 22853# 2009-09-19 22854# * change ncv and op capabilities in sun-color to match Sun's entry for 22855# this (report by Laszlo Peter) 22856# * improve interix smso by using reverse rather than bold (report by 22857# Kristof Zelechovski). 22858# 22859# 2009-10-03 22860# * remove unnecessary kcan assignment to ^C from putty (Sven Joachim) 22861# * add linux-16color (Benjamin Sittler) 22862# * correct initc capability of linux-c-nc end-of-range (Benjamin Sittler) 22863# * similar change for dg+ccc and dgunix+ccc (Benjamin Sittler) 22864# * add ccc and initc capabilities to xterm-16color -TD 22865# 22866# 2009-10-31 22867# * updated nsterm* entries (Benjamin Sittler, prompted by GenToo #206201) 22868# 22869# 2009-12-12 22870# * updated nsterm* entries (Benjamin Sittler, Emanuele Giaquinta) 22871# 22872# 2009-12-19 22873# * add bw (auto-left-margin) to nsterm* entries (Benjamin Sittler) 22874# * rename minix to minix-1.7, add minix entry for Minux3 -TD 22875# 22876# 2009-12-26 22877# * add bterm (bogl 0.1.18) -TD 22878# * minor fix to rxvt+pcfkeys -TD 22879# 22880# 2010-02-06 22881# * update mrxvt to 0.5.4, add mrxvt-256color -TD 22882# 22883# 2010-02-13 22884# * add several screen-bce.XXX entries -TD 22885# 22886# 2010-02-23 22887# * modify screen-bce.XXX entries to exclude ech, since screen's color 22888# model does not clear with color for that feature -TD 22889# 22890# 2010-03-20 22891# * rename atari and st52 to atari-old, st52-old, use newer entries from 22892# FreeMiNT by Guido Flohr (from patch/report by Alan Hourihane). 22893# 22894# 2010-06-12 22895# * add mlterm+256color entry -TD 22896# 22897# 2010-07-17 22898# * add hard-reset for rs2 to wsvt25 to help ensure that reset ends 22899# the alternate character set (patch by Nicholas Marriott) 22900# 22901# 2010-08-28 22902# * improve acsc for vt52 (Benjamin Sittler) 22903# * modify nsterm entries for consistent sgr/sgr0 -TD 22904# * modify xnuppc entries for consistent sgr/sgr0 -TD 22905# * add invis to tek4115 sgr -TD 22906# 22907# 2010-09-11 22908# * reformat acsc strings to canonical format -TD 22909# 22910# 2010-09-25 22911# * add "XT" capability to entries for terminals that support both 22912# xterm-style mouse- and title-controls, for "screen" which 22913# special-cases TERM beginning with "xterm" or "rxvt" -TD 22914# 22915# 2010-10-02 22916# * fill in no-parameter forms of cursor-movement where a parameterized 22917# form is available -TD 22918# * fill in missing cursor controls where the form of the controls is 22919# ANSI -TD 22920# * add parameterized cursor-controls to linux-basic (report by Dae) -TD 22921# 22922# 2010-10-09 22923# * correct comparison used for setting 16-colors in linux-16color 22924# entry (Novell #644831) -TD 22925# * improve linux-16color entry, using "dim" for color-8 which makes it 22926# gray rather than black like color-0 -TD 22927# 22928# 2010-11-20 22929# * make "vte" the principal entry defining "gnome", since GNOME terminal 22930# is merely one of several terminals whose behavior is provided by this 22931# library -TD 22932# 22933# 2010-11-27 22934# * fix typo in rmso for tek4106 -Goran Weinholt 22935# 22936# 2010-12-11 22937# * suppress ncv in screen entry, allowing underline -Alejandro R. Sedeno 22938# * also suppress ncv in konsole-base -TD 22939# 22940# 2011-02-05 22941# * add U8 feature to denote entries for terminal emulators which do not 22942# support VT100 SI/SO when processing UTF-8 encoding -TD 22943# * add xterm-utf8 as a demo of the U8 feature -TD 22944# 22945# 2011-02-20 22946# * add cons25-debian entry (Brian M Carlson, Debian #607662). 22947# 22948# 2011-06-11 22949# * update minix entry to minix 3.2 (Thomas Cort). 22950# 22951# 2011-07-09 22952# * fix inconsistent tabset path in pcmw (Todd C. Miller). 22953# * remove a backslash which continued comment, obscuring altos3 22954# definition with OpenBSD toolset (Nicholas Marriott). 22955# 22956# 2011-07-16 22957# * add/use xterm+tmux chunk from xterm #271 -TD 22958# * resync xterm-new entry from xterm #271 -TD 22959# * add E3 extended capability to linux-basic (Miroslav Lichvar) 22960# * add linux2.2, linux2.6, linux3.0 entries to give context for E3 -TD 22961# * add SI/SO change to linux2.6 entry (Debian #515609) -TD 22962# 22963# 2011-07-21 22964# * add kich1 to sun (Yuri Pankov) 22965# * use bold rather than reverse for smso in sun-color (Yuri Pankov). 22966# 22967# 2011-08-06 22968# * corrected k9 in dg460-ansi, add other features based on manuals -TD 22969# 22970# 2011-08-20 22971# * minor cleanup of X-terminal emulator section -TD 22972# * add terminator entry -TD 22973# * add simpleterm entry -TD 22974# 22975# 2011-09-10 22976# * add xterm+kbs fragment from xterm #272 -TD 22977# 22978# 2011-11-12 22979# * add pccon entries for OpenBSD console (Alexei Malinin) 22980# 22981# 2011-12-17 22982# * corrected old changelog comments -TD 22983# 22984# 2011-11-24 22985# * add putty-sco -TD 22986# 22987# 2012-01-28 22988# * add mach-gnu (Samuel Thibault) 22989# * add mach-gnu-color, tweaks to mach-gnu -TD 22990# * make sgr for sun-color agree with smso -TD 22991# * make sgr for prism9 agree with other caps -TD 22992# * make sgr for icl6404 agree with other caps -TD 22993# * make sgr for ofcons agree with other caps -TD 22994# * make sgr for att5410v1, att4415, att620 agree with other caps -TD 22995# * make sgr for aaa-unk, aaa-rv agree with other caps -TD 22996# * make sgr for avt-ns agree with other caps -TD 22997# 22998# 2012-02-11 22999# * make sgr for xterm-pcolor agree with other caps -TD 23000# * make sgr for att5425 agree with other caps -TD 23001# * make sgr for att630 agree with other caps -TD 23002# * make sgr for linux entries agree with other caps -TD 23003# * make sgr for tvi9065 agree with other caps -TD 23004# * make sgr for ncr260vt200an agree with other caps -TD 23005# * make sgr for ncr160vt100pp agree with other caps -TD 23006# * make sgr for ncr260vt300an agree with other caps -TD 23007# * make sgr for aaa-60-dec-rv, aaa+dec agree with other caps -TD 23008# * make sgr for cygwin, cygwinDBG agree with other caps -TD 23009# 23010# 2012-03-31 23011# * correct order of use-clauses in st-256color -TD 23012# 23013# 2012-04-01 23014# * revert 2011-07-16 change to "linux" alias, return to "linux2.2" -TD 23015# 23016# 2012-04-14 23017# * document all of the user-defined capabilities in one place -TD 23018# * add XT to some places to improve usefulness for other applications 23019# than screen, which would like to pretend that xterm's title is 23020# a status-line. -TD 23021# * change use-clauses in ansi-mtabs, hp2626, and hp2622 based on review 23022# of ordering and overrides -TD 23023# 23024# 2012-04-21 23025# * add msgr to vt420, similar DEC vtXXX entries -TD 23026# * add several missing vt420 capabilities from vt220 -TD 23027# * factor out ansi+pp from several entries -TD 23028# * change xterm+sl and xterm+sl-twm to include only the status-line 23029# capabilities and not "use=xterm", making them more generally useful 23030# as building-blocks -TD 23031# * add dec+sl building block, as example -TD 23032# 23033# 2012-04-28 23034# * fix some inconsistencies between vt320/vt420, e.g., cnorm/civis -TD 23035# * add eslok flag to dec+sl -TD 23036# * dec+sl applies to vt320 and up -TD 23037# * drop wsl width from xterm+sl -TD 23038# * reuse xterm+sl in putty and nsca-m -TD 23039# * add ansi+tabs to vt520 -TD 23040# * add ansi+enq to vt220-vt520 -TD 23041# 23042# 2012-05-05 23043# * remove p6 (bold) from opus3n1+ for consistency -TD 23044# * remove acs stuff from env230 per clues in Ingres termcap -TD 23045# * modify env230 sgr/sgr0 to match other capabilities -TD 23046# * modify smacs/rmacs in bq300-8 to match sgr/sgr0 -TD 23047# * make sgr for dku7202 agree with other caps -TD 23048# * make sgr for ibmpc agree with other caps -TD 23049# * make sgr for tek4107 agree with other caps -TD 23050# * make sgr for ndr9500 agree with other caps -TD 23051# * make sgr for sco-ansi agree with other caps -TD 23052# * make sgr for d410 agree with other caps -TD 23053# * make sgr for d210 agree with other caps -TD 23054# * make sgr for d470c, d470c-7b agree with other caps -TD 23055# 23056# 2012-05-12 23057# * rewrite vt520 entry based on vt420 -TD 23058# * corrected 'op' for bterm (report by Samuel Thibault) -TD 23059# 23060# 2012-06-02 23061# * add kdch1 to wsvt25 entry from NetBSD CVS (reported by David Lord, 23062# analysis by Martin Husemann). 23063# * add cnorm/civis to wsvt25 entry from NetBSD CVS (report/analysis by 23064# Onno van der Linden). 23065# * add kdch1 aka "Remove" to vt220 and vt220-8 entries -TD 23066# * add kdch1, etc., to qvt108 -TD 23067# * add dl1/il1 to some entries based on dl/il values -TD 23068# * add dl to simpleterm -TD 23069# 23070# 2012-06-10 23071# * modify some older xterm entries to align with xterm source -TD 23072# * separate "xterm-old" alias from "xterm-r6" -TD 23073# 23074# 2012-07-28 23075# * add E3 to xterm-basic and putty -TD 23076# 23077# 2012-08-11 23078# * add nsterm-256color, make this the default nsterm -TD 23079# * remove bw from nsterm-bce, per testing with tack -TD 23080# 23081# 2012-10-12 23082# * add vte-2012, gnome-2012, making these the defaults for vte/gnome 23083# (patch by Christian Persch). 23084# 23085# 2012-11-02 23086# * reviewed vte-2012, reverted most of the change since it was incorrect 23087# based on testing with tack -TD 23088# * un-cancel the initc in vte-256color, since this was implemented 23089# starting with version 0.20 in 2009 -TD 23090# 23091# 2013-03-16 23092# * correct typo in sgr string for sun-color, 23093# add bold for consistency with sgr, 23094# change smso for consistency with sgr -TD 23095# * correct typo in sgr string for terminator -TD 23096# * add blink to the attributes masked by ncv in linux-16color (report 23097# by Benjamin Sittler) 23098# 23099# 2013-03-23 23100# * change initialization for vt220, similar entries for consistency 23101# with cursor-key strings (NetBSD #47674) -TD 23102# * further improvements to linux-16color (Benjamin Sittler) 23103# 23104# 2013-05-11 23105# * move nsterm-related entries out of "obsolete" section to more 23106# plausible "ansi consoles" -TD 23107# * additional cleanup of table-of-contents by reordering -TD 23108# 23109# 2013-06-07 23110# * added note to clarify Terminal.app's non-emulation of the various 23111# terminal types listed in the preferences dialog -TD 23112# 23113# 2013-11-02 23114# * use TS extension to describe xterm's title-escapes -TD 23115# * modify terminator and nsterm-s to use xterm+sl-twm building block -TD 23116# * update hurd.ti, add xenl to reflect 2011-03-06 change in 23117# http://git.savannah.gnu.org/cgit/hurd/hurd.git/log/console/display.c 23118# (Debian #727119). 23119# * simplify pfkey expression in ansi.sys -TD 23120# 23121# 2013-11-10 23122# * split-out building blocks xterm+sm+1002 and xterm+sm+1003 -TD 23123# 23124# 2014-02-22 23125# * updated notes for wsvt25 based on tack and vttest -TD 23126# * add teken entry to show actual properties of FreeBSD's "xterm" 23127# console -TD 23128# 23129######## SHANTIH! SHANTIH! SHANTIH! 23130
