t
***************************************************************************
Copyright (c) 1998,2000 Free Software Foundation, Inc. *
*
Permission is hereby granted, free of charge, to any person obtaining a *
copy of this software and associated documentation files (the *
"Software"), to deal in the Software without restriction, including *
without limitation the rights to use, copy, modify, merge, publish, *
distribute, distribute with modifications, sublicense, and/or sell *
copies of the Software, and to permit persons to whom the Software is *
furnished to do so, subject to the following conditions: *
*
The above copyright notice and this permission notice shall be included *
in all copies or substantial portions of the Software. *
*
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
*
Except as contained in this notice, the name(s) of the above copyright *
holders shall not be used in advertising or otherwise to promote the *
sale, use or other dealings in this Software without prior written *
authorization. *
***************************************************************************

$Id: tput.1,v 1.16 2000/09/09 20:43:33 tom Exp $
tput, reset - initialize a terminal or query terminfo database tput [-Ttype] capname [parms ... ]

tput [-Ttype] init

tput [-Ttype] reset

tput [-Ttype] longname

tput -S <<

tput -V

The tput utility uses the terminfo database to make the values of terminal-dependent capabilities and information available to the shell (see sh(1)), to initialize or reset the terminal, or return the long name of the requested terminal type. tput outputs a string if the attribute (capability name) is of type string, or an integer if the attribute is of type integer. If the attribute is of type boolean, tput simply sets the exit code (0 for TRUE if the terminal has the capability, 1 for FALSE if it does not), and produces no output. Before using a value returned on standard output, the user should test the exit code [$?, see sh(1)] to be sure it is 0. (See the EXIT CODES and DIAGNOSTICS sections.) For a complete list of capabilities and the capname associated with each, see terminfo(\*n).

-Ttype indicates the type of terminal. Normally this option is unnecessary, because the default is taken from the environment variable TERM. If -T is specified, then the shell variables LINES and COLUMNS will be ignored,and the operating system will not be queried for the actual screen size.

capname indicates the attribute from the terminfo database. When termcap support is compiled in, the termcap name for the attribute is also accepted.

parms If the attribute is a string that takes parameters, the arguments parms will be instantiated into the string. An all numeric argument will be passed to the attribute as a number.

-S allows more than one capability per invocation of tput. The capabilities must be passed to tput from the standard input instead of from the command line (see example). Only one capname is allowed per line. The -S option changes the meaning of the 0 and 1 boolean and string exit codes (see the EXIT CODES section).

-V reports the version of ncurses which was used in this program, and exits.

init If the terminfo database is present and an entry for the user's terminal exists (see -Ttype, above), the following will occur: (1) if present, the terminal's initialization strings will be output (is1, is2, is3, if, iprog), (2) any delays (e.g., newline) specified in the entry will be set in the tty driver, (3) tabs expansion will be turned on or off according to the specification in the entry, and (4) if tabs are not expanded, standard tabs will be set (every 8 spaces). If an entry does not contain the information needed for any of the four above activities, that activity will silently be skipped.

reset Instead of putting out initialization strings, the terminal's reset strings will be output if present (rs1, rs2, rs3, rf). If the reset strings are not present, but initialization strings are, the initialization strings will be output. Otherwise, reset acts identically to init.

longname If the terminfo database is present and an entry for the user's terminal exists (see -Ttype above), then the long name of the terminal will be put out. The long name is the last name in the first line of the terminal's description in the terminfo database [see term(5)].

If tput is invoked by a link named reset, this has the same effect as tput reset. See tset for comparison, which has similar behavior.

5 tput init Initialize the terminal according to the type of terminal in the environmental variable TERM. This command should be included in everyone's .profile after the environmental variable TERM has been exported, as illustrated on the profile(4) manual page.

5 tput -T5620 reset Reset an AT&T 5620 terminal, overriding the type of terminal in the environmental variable TERM.

5 tput cup 0 0 Send the sequence to move the cursor to row 0, column 0 (the upper left corner of the screen, usually known as the "home" cursor position).

5 tput clear Echo the clear-screen sequence for the current terminal.

5 tput cols Print the number of columns for the current terminal.

5 tput -T450 cols Print the number of columns for the 450 terminal.

5 bold=`tput smso` offbold=`tput rmso` Set the shell variables bold, to begin stand-out mode sequence, and offbold, to end standout mode sequence, for the current terminal. This might be followed by a prompt: echo "${bold}Please type in your name: ${offbold}\\c"

5 tput hc Set exit code to indicate if the current terminal is a hard copy terminal.

5 tput cup 23 4 Send the sequence to move the cursor to row 23, column 4.

5 tput longname Print the long name from the terminfo database for the type of terminal specified in the environmental variable TERM.

5 \& This example shows tput processing several capabilities in one invocation. This example clears the screen, moves the cursor to position 10, 10 and turns on bold (extra bright) mode. The list is terminated by an exclamation mark (!) on a line by itself.

\*d compiled terminal description database

/usr/include/curses.h curses(3X) header file

/usr/include/term.h terminfo header file

@DATADIR@/tabset/* tab settings for some terminals, in a format appropriate to be output to the terminal (escape sequences that set margins and tabs); for more information, see the "Tabs and Initialization" section of terminfo(4)

@CLEAR@(1), stty(1), tabs(\*n). profile(\*n), terminfo(4) in the System Administrator's Reference Manual. Chapter 10 of the Programmer's Guide. If capname is of type boolean, a value of 0 is set for TRUE and 1 for FALSE unless the -S option is used.

If capname is of type string, a value of 0 is set if the capname is defined for this terminal type (the value of capname is returned on standard output); a value of 1 is set if capname is not defined for this terminal type (a null value is returned on standard output).

If capname is of type boolean or string and the -S option is used, a value of 0 is returned to indicate that all lines were successful. No indication of which line failed can be given so exit code 1 will never appear. Exit codes 2, 3, and 4 retain their usual interpretation.

If capname is of type integer, a value of 0 is always set, whether or not capname is defined for this terminal type. To determine if capname is defined for this terminal type, the user must test the value of standard output. A value of -1 means that capname is not defined for this terminal type.

Any other exit code indicates an error; see the DIAGNOSTICS section.

tput prints the following error messages and sets the corresponding exit codes.

exit code error message

0

(capname is a numeric variable that is not specified in the

terminfo(\*n) database for this terminal type, e.g.

tput -T450 lines and tput -T2621 xmc)

1 no error message is printed, see the EXIT CODES section.

2 usage error

3 unknown terminal type or no terminfo database

4 unknown terminfo capability capname

The longname and -S options, and the parameter-substitution features used in the cup example, are not supported in BSD curses or in AT&T/USL curses before SVr4. #
# The following sets edit modes for GNU EMACS
# Local Variables:
# mode:nroff
# fill-column:79
# End: