t
***************************************************************************
Copyright (c) 1998,2000 Free Software Foundation, Inc. *
*
Permission is hereby granted, free of charge, to any person obtaining a *
copy of this software and associated documentation files (the *
"Software"), to deal in the Software without restriction, including *
without limitation the rights to use, copy, modify, merge, publish, *
distribute, distribute with modifications, sublicense, and/or sell *
copies of the Software, and to permit persons to whom the Software is *
furnished to do so, subject to the following conditions: *
*
The above copyright notice and this permission notice shall be included *
in all copies or substantial portions of the Software. *
*
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS *
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF *
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. *
IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, *
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR *
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR *
THE USE OR OTHER DEALINGS IN THE SOFTWARE. *
*
Except as contained in this notice, the name(s) of the above copyright *
holders shall not be used in advertising or otherwise to promote the *
sale, use or other dealings in this Software without prior written *
authorization. *
***************************************************************************

$Id: infocmp.1m,v 1.27 2000/08/19 18:51:05 tom Exp $
infocmp - compare or print out terminfo descriptions infocmp [-dceEGgnpqrILCuV1] [-v n] [-s d| i| l| c]

[-w width] [-A directory] [-B directory]

[termname...]

infocmp can be used to compare a binary terminfo entry with other terminfo entries, rewrite a terminfo description to take advantage of the use= terminfo field, or print out a terminfo description from the binary file (term) in a variety of formats. In all cases, the boolean fields will be printed first, followed by the numeric fields, followed by the string fields. .. If no options are specified and zero or one termnames are specified, the -I option will be assumed. If more than one termname is specified, the -d option will be assumed. .. infocmp compares the terminfo description of the first terminal termname with each of the descriptions given by the entries for the other terminal's termnames. If a capability is defined for only one of the terminals, the value returned will depend on the type of the capability: F for boolean variables, -1 for integer variables, and NULL for string variables. The -d option produces a list of each capability that is different between two entries. This option is useful to show the difference between two entries, created by different people, for the same or similar terminals. The -c option produces a list of each capability that is common between two entries. Capabilities that are not set are ignored. This option can be used as a quick check to see if the -u option is worth using. The -n option produces a list of each capability that is in neither entry. If no termnames are given, the environment variable TERM will be used for both of the termnames. This can be used as a quick check to see if anything was left out of a description. .. The -I, -L, and -C options will produce a source listing for each terminal named.

-I/use the terminfo names

-L/use the long C variable name listed in <term.h>

-C/use the termcap names

-r/when using -C, put out all capabilities in termcap form

If no termnames are given, the environment variable TERM will be used for the terminal name. The source produced by the -C option may be used directly as a termcap entry, but not all parameterized strings can be changed to the termcap format. infocmp will attempt to convert most of the parameterized information, and anything not converted will be plainly marked in the output and commented out. These should be edited by hand. All padding information for strings will be collected together and placed at the beginning of the string where termcap expects it. Mandatory padding (padding information with a trailing '/') will become optional. All termcap variables no longer supported by terminfo, but which are derivable from other terminfo variables, will be output. Not all terminfo capabilities will be translated; only those variables which were part of termcap will normally be output. Specifying the -r option will take off this restriction, allowing all capabilities to be output in termcap form. Note that because padding is collected to the beginning of the capability, not all capabilities are output. Mandatory padding is not supported. Because termcap strings are not as flexible, it is not always possible to convert a terminfo string capability into an equivalent termcap format. A subsequent conversion of the termcap file back into terminfo format will not necessarily reproduce the original terminfo source. Some common terminfo parameter sequences, their termcap equivalents, and some terminal types which commonly have such sequences, are:

terminfo/termcap/Representative Terminals

%p1%c/%./adm

%p1%d/%d/hp, ANSI standard, vt100

%p1%'x'%+%c/%+x/concept

%i/%iq/ANSI standard, vt100

%p1%?%'x'%>%t%p1%'y'%+%;/%>xy/concept

%p2 is printed before %p1/%r/hp

The -u option produces a terminfo source description of the first terminal termname which is relative to the sum of the descriptions given by the entries for the other terminals termnames. It does this by analyzing the differences between the first termname and the other termnames and producing a description with use= fields for the other terminals. In this manner, it is possible to retrofit generic terminfo entries into a terminal's description. Or, if two similar terminals exist, but were coded at different times or by different people so that each description is a full description, using infocmp will show what can be done to change one description to be relative to the other. A capability will get printed with an at-sign (@) if it no longer exists in the first termname, but one of the other termname entries contains a value for it. A capability's value gets printed if the value in the first termname is not found in any of the other termname entries, or if the first of the other termname entries that has this capability gives a different value for the capability than that in the first termname. The order of the other termname entries is significant. Since the terminfo compiler tic does a left-to-right scan of the capabilities, specifying two use= entries that contain differing entries for the same capabilities will produce different results depending on the order that the entries are given in. infocmp will flag any such inconsistencies between the other termname entries as they are found. Alternatively, specifying a capability after a use= entry that contains that capability will cause the second specification to be ignored. Using infocmp to recreate a description can be a useful check to make sure that everything was specified correctly in the original source description. Another error that does not cause incorrect compiled files, but will slow down the compilation time, is specifying extra use= fields that are superfluous. infocmp will flag any other termname use= fields that were not needed. .. The location of the compiled terminfo database is taken from the environment variable TERMINFO . If the variable is not defined, or the terminal is not found in that location, the system terminfo database, in @TERMINFO@, will be used. The options -A and -B may be used to override this location. The -A option will set TERMINFO for the first termname and the -B option will set TERMINFO for the other termnames. With this, it is possible to compare descriptions for a terminal with the same name located in two different databases. This is useful for comparing descriptions for the same terminal created by different people. .. The -s option sorts the fields within each type according to the argument below: ..

5 d leave fields in the order that they are stored in the terminfo database.

5 i sort by terminfo name.

5 l sort by the long C variable name.

5 c sort by the termcap name. If the -s option is not given, the fields printed out will be sorted alphabetically by the terminfo name within each type, except in the case of the -C or the -L options, which cause the sorting to be done by the termcap name or the long C variable name, respectively.

5 -1 causes the fields to be printed out one to a line. Otherwise, the fields will be printed several to a line to a maximum width of 60 characters.

5 -F compare terminfo files. This assumes that two following arguments are filenames. The files are searched for pairwise matches between entries, with two entries considered to match if any of their names do. The report printed to standard output lists entries with no matches in the other file, and entries with more than one match. For entries with exactly one match it includes a difference report. Normally, to reduce the volume of the report, use references are not resolved before looking for differences, but resolution can be forced by also specifying -r.

-G Display constant literals in decimal form rather than their character equivalents.

-a tells infocmp to retain commented-out capabilities rather than discarding them. Capabilities are commented by prefixing them with a period.

5 -q Make the comparison listing shorter by omitting subheadings, and using "-" for absent capabilities, "@" for canceled rather than "NULL".

5 -Rsubset Restrict output to a given subset. This option is for use with archaic versions of terminfo like those on SVr1, Ultrix, or HP/UX that do not support the full set of SVR4/XSI Curses terminfo; and variants such as AIX that have their own extensions incompatible with SVr4/XSI. Available terminfo subsets are "SVr1", "Ultrix", "HP", and "AIX"; see terminfo(\*n) for details. You can also choose the subset "BSD" which selects only capabilities with termcap equivalents recognized by 4.4BSD.

5 -T eliminates size-restrictions on the generated text. This is mainly useful for testing and analysis, since the compiled descriptions are limited (e.g., 1023 for termcap, 4096 for terminfo).

5 -V reports the version of ncurses which was used in this program, and exits.

5 -e Dump the capabilities of the given terminal as a C initializer for a TERMTYPE structure (the terminal capability structure in the <term.h>). This option is useful for preparing versions of the curses library hardwired for a given terminal type.

5 -E Dump the capabilities of the given terminal as tables, needed in the C initializer for a TERMTYPE structure (the terminal capability structure in the <term.h>). This option is useful for preparing versions of the curses library hardwired for a given terminal type. The tables are all declared static, and are named according to the type and the name of the corresponding terminal entry. Before ncurses 5.0, the split between the -e and -E options was not needed; but support for extended names required making the arrays of terminal capabilities separate from the TERMTYPE structure.

-f Display complex terminfo strings which contain if/then/else/endif expressions indented for readability.

-g Display constant character literals in quoted form rather than their decimal equivalents.

5 -i Analyze the initialization (is1, is2, is3), and reset (rs1, rs2, rs3), strings in the entry. For each string, the code tries to analyze it into actions in terms of the other capabilities in the entry, certain X3.64/ISO 6429/ECMA-48 capabilities, and certain DEC VT-series private modes (the set of recognized special sequences has been selected for completeness over the existing terminfo database). Each report line consists of the capability name, followed by a colon and space, followed by a printable expansion of the capability string with sections matching recognized actions translated into {}-bracketed descriptions. Here is a list of the DEC/ANSI special sequences recognized:

Action/Meaning

RIS/full reset

SC/save cursor

RC/restore cursor

LL/home-down

RSR/reset scroll region

ISO DEC G0/enable DEC graphics for G0

ISO UK G0/enable UK chars for G0

ISO US G0/enable US chars for G0

ISO DEC G1/enable DEC graphics for G1

ISO UK G1/enable UK chars for G1

ISO US G1/enable US chars for G1

DECPAM/application keypad mode

DECPNM/normal keypad mode

DECANSI/enter ANSI mode

DEC[+-]CKM/application cursor keys

DEC[+-]ANM/set VT52 mode

DEC[+-]COLM/132-column mode

DEC[+-]SCLM/smooth scroll

DEC[+-]SCNM/reverse video mode

DEC[+-]OM/origin mode

DEC[+-]AWM/wraparound mode

DEC[+-]ARM/auto-repeat mode

It also recognizes a SGR action corresponding to ANSI/ISO 6429/ECMA Set Graphics Rendition, with the values NORMAL, BOLD, UNDERLINE, BLINK, and REVERSE. All but NORMAL may be prefixed with `+' (turn on) or `-' (turn off). An SGR0 designates an empty highlight sequence (equivalent to {SGR:NORMAL}).

5 -p Ignore padding specifications when comparing strings.

5 -v n prints out tracing information on standard error as the program runs. Higher values of n induce greater verbosity.

5 -w width changes the output to width characters. ..

20 \*d Compiled terminal description database. ..

The -E, -F, -G, -R, -T, -V, -a, -e, -f, -g, -i, -p, and -q options are not supported in SVr4 curses. The -r option's notion of `termcap' capabilities is System V Release 4's. Actual BSD curses versions will have a more restricted set. To see only the 4.4BSD set, use -r -RBSD. The -F option of infocmp(1M) should be a toe(1M) mode. infocmp(1M), captoinfo(1M), infotocap(1M), tic(1M), toe(1M), curses(3X), terminfo(\*n). Eric S. Raymond <esr@snark.thyrsus.com> and Thomas E. Dickey <dickey@herndon4.his.com> #
# The following sets edit modes for GNU EMACS
# Local Variables:
# mode:nroff
# fill-column:79
# End: