1 //===-- PPCISelLowering.h - PPC32 DAG Lowering Interface --------*- C++ -*-===// 2 // 3 // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. 4 // See https://llvm.org/LICENSE.txt for license information. 5 // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception 6 // 7 //===----------------------------------------------------------------------===// 8 // 9 // This file defines the interfaces that PPC uses to lower LLVM code into a 10 // selection DAG. 11 // 12 //===----------------------------------------------------------------------===// 13 14 #ifndef LLVM_LIB_TARGET_POWERPC_PPCISELLOWERING_H 15 #define LLVM_LIB_TARGET_POWERPC_PPCISELLOWERING_H 16 17 #include "PPCInstrInfo.h" 18 #include "llvm/CodeGen/CallingConvLower.h" 19 #include "llvm/CodeGen/MachineFunction.h" 20 #include "llvm/CodeGen/MachineMemOperand.h" 21 #include "llvm/CodeGen/SelectionDAG.h" 22 #include "llvm/CodeGen/SelectionDAGNodes.h" 23 #include "llvm/CodeGen/TargetLowering.h" 24 #include "llvm/CodeGen/ValueTypes.h" 25 #include "llvm/IR/Attributes.h" 26 #include "llvm/IR/CallingConv.h" 27 #include "llvm/IR/Function.h" 28 #include "llvm/IR/InlineAsm.h" 29 #include "llvm/IR/Metadata.h" 30 #include "llvm/IR/Type.h" 31 #include "llvm/Support/MachineValueType.h" 32 #include <optional> 33 #include <utility> 34 35 namespace llvm { 36 37 namespace PPCISD { 38 39 // When adding a NEW PPCISD node please add it to the correct position in 40 // the enum. The order of elements in this enum matters! 41 // Values that are added after this entry: 42 // STBRX = ISD::FIRST_TARGET_MEMORY_OPCODE 43 // are considered memory opcodes and are treated differently than entries 44 // that come before it. For example, ADD or MUL should be placed before 45 // the ISD::FIRST_TARGET_MEMORY_OPCODE while a LOAD or STORE should come 46 // after it. 47 enum NodeType : unsigned { 48 // Start the numbering where the builtin ops and target ops leave off. 49 FIRST_NUMBER = ISD::BUILTIN_OP_END, 50 51 /// FSEL - Traditional three-operand fsel node. 52 /// 53 FSEL, 54 55 /// XSMAXC[DQ]P, XSMINC[DQ]P - C-type min/max instructions. 56 XSMAXC, 57 XSMINC, 58 59 /// FCFID - The FCFID instruction, taking an f64 operand and producing 60 /// and f64 value containing the FP representation of the integer that 61 /// was temporarily in the f64 operand. 62 FCFID, 63 64 /// Newer FCFID[US] integer-to-floating-point conversion instructions for 65 /// unsigned integers and single-precision outputs. 66 FCFIDU, 67 FCFIDS, 68 FCFIDUS, 69 70 /// FCTI[D,W]Z - The FCTIDZ and FCTIWZ instructions, taking an f32 or f64 71 /// operand, producing an f64 value containing the integer representation 72 /// of that FP value. 73 FCTIDZ, 74 FCTIWZ, 75 76 /// Newer FCTI[D,W]UZ floating-point-to-integer conversion instructions for 77 /// unsigned integers with round toward zero. 78 FCTIDUZ, 79 FCTIWUZ, 80 81 /// Floating-point-to-integer conversion instructions 82 FP_TO_UINT_IN_VSR, 83 FP_TO_SINT_IN_VSR, 84 85 /// VEXTS, ByteWidth - takes an input in VSFRC and produces an output in 86 /// VSFRC that is sign-extended from ByteWidth to a 64-byte integer. 87 VEXTS, 88 89 /// Reciprocal estimate instructions (unary FP ops). 90 FRE, 91 FRSQRTE, 92 93 /// Test instruction for software square root. 94 FTSQRT, 95 96 /// Square root instruction. 97 FSQRT, 98 99 /// VPERM - The PPC VPERM Instruction. 100 /// 101 VPERM, 102 103 /// XXSPLT - The PPC VSX splat instructions 104 /// 105 XXSPLT, 106 107 /// XXSPLTI_SP_TO_DP - The PPC VSX splat instructions for immediates for 108 /// converting immediate single precision numbers to double precision 109 /// vector or scalar. 110 XXSPLTI_SP_TO_DP, 111 112 /// XXSPLTI32DX - The PPC XXSPLTI32DX instruction. 113 /// 114 XXSPLTI32DX, 115 116 /// VECINSERT - The PPC vector insert instruction 117 /// 118 VECINSERT, 119 120 /// VECSHL - The PPC vector shift left instruction 121 /// 122 VECSHL, 123 124 /// XXPERMDI - The PPC XXPERMDI instruction 125 /// 126 XXPERMDI, 127 XXPERM, 128 129 /// The CMPB instruction (takes two operands of i32 or i64). 130 CMPB, 131 132 /// Hi/Lo - These represent the high and low 16-bit parts of a global 133 /// address respectively. These nodes have two operands, the first of 134 /// which must be a TargetGlobalAddress, and the second of which must be a 135 /// Constant. Selected naively, these turn into 'lis G+C' and 'li G+C', 136 /// though these are usually folded into other nodes. 137 Hi, 138 Lo, 139 140 /// The following two target-specific nodes are used for calls through 141 /// function pointers in the 64-bit SVR4 ABI. 142 143 /// OPRC, CHAIN = DYNALLOC(CHAIN, NEGSIZE, FRAME_INDEX) 144 /// This instruction is lowered in PPCRegisterInfo::eliminateFrameIndex to 145 /// compute an allocation on the stack. 146 DYNALLOC, 147 148 /// This instruction is lowered in PPCRegisterInfo::eliminateFrameIndex to 149 /// compute an offset from native SP to the address of the most recent 150 /// dynamic alloca. 151 DYNAREAOFFSET, 152 153 /// To avoid stack clash, allocation is performed by block and each block is 154 /// probed. 155 PROBED_ALLOCA, 156 157 /// The result of the mflr at function entry, used for PIC code. 158 GlobalBaseReg, 159 160 /// These nodes represent PPC shifts. 161 /// 162 /// For scalar types, only the last `n + 1` bits of the shift amounts 163 /// are used, where n is log2(sizeof(element) * 8). See sld/slw, etc. 164 /// for exact behaviors. 165 /// 166 /// For vector types, only the last n bits are used. See vsld. 167 SRL, 168 SRA, 169 SHL, 170 171 /// FNMSUB - Negated multiply-subtract instruction. 172 FNMSUB, 173 174 /// EXTSWSLI = The PPC extswsli instruction, which does an extend-sign 175 /// word and shift left immediate. 176 EXTSWSLI, 177 178 /// The combination of sra[wd]i and addze used to implemented signed 179 /// integer division by a power of 2. The first operand is the dividend, 180 /// and the second is the constant shift amount (representing the 181 /// divisor). 182 SRA_ADDZE, 183 184 /// CALL - A direct function call. 185 /// CALL_NOP is a call with the special NOP which follows 64-bit 186 /// CALL_NOTOC the caller does not use the TOC. 187 /// SVR4 calls and 32-bit/64-bit AIX calls. 188 CALL, 189 CALL_NOP, 190 CALL_NOTOC, 191 192 /// CHAIN,FLAG = MTCTR(VAL, CHAIN[, INFLAG]) - Directly corresponds to a 193 /// MTCTR instruction. 194 MTCTR, 195 196 /// CHAIN,FLAG = BCTRL(CHAIN, INFLAG) - Directly corresponds to a 197 /// BCTRL instruction. 198 BCTRL, 199 200 /// CHAIN,FLAG = BCTRL(CHAIN, ADDR, INFLAG) - The combination of a bctrl 201 /// instruction and the TOC reload required on 64-bit ELF, 32-bit AIX 202 /// and 64-bit AIX. 203 BCTRL_LOAD_TOC, 204 205 /// The variants that implicitly define rounding mode for calls with 206 /// strictfp semantics. 207 CALL_RM, 208 CALL_NOP_RM, 209 CALL_NOTOC_RM, 210 BCTRL_RM, 211 BCTRL_LOAD_TOC_RM, 212 213 /// Return with a flag operand, matched by 'blr' 214 RET_FLAG, 215 216 /// R32 = MFOCRF(CRREG, INFLAG) - Represents the MFOCRF instruction. 217 /// This copies the bits corresponding to the specified CRREG into the 218 /// resultant GPR. Bits corresponding to other CR regs are undefined. 219 MFOCRF, 220 221 /// Direct move from a VSX register to a GPR 222 MFVSR, 223 224 /// Direct move from a GPR to a VSX register (algebraic) 225 MTVSRA, 226 227 /// Direct move from a GPR to a VSX register (zero) 228 MTVSRZ, 229 230 /// Direct move of 2 consecutive GPR to a VSX register. 231 BUILD_FP128, 232 233 /// BUILD_SPE64 and EXTRACT_SPE are analogous to BUILD_PAIR and 234 /// EXTRACT_ELEMENT but take f64 arguments instead of i64, as i64 is 235 /// unsupported for this target. 236 /// Merge 2 GPRs to a single SPE register. 237 BUILD_SPE64, 238 239 /// Extract SPE register component, second argument is high or low. 240 EXTRACT_SPE, 241 242 /// Extract a subvector from signed integer vector and convert to FP. 243 /// It is primarily used to convert a (widened) illegal integer vector 244 /// type to a legal floating point vector type. 245 /// For example v2i32 -> widened to v4i32 -> v2f64 246 SINT_VEC_TO_FP, 247 248 /// Extract a subvector from unsigned integer vector and convert to FP. 249 /// As with SINT_VEC_TO_FP, used for converting illegal types. 250 UINT_VEC_TO_FP, 251 252 /// PowerPC instructions that have SCALAR_TO_VECTOR semantics tend to 253 /// place the value into the least significant element of the most 254 /// significant doubleword in the vector. This is not element zero for 255 /// anything smaller than a doubleword on either endianness. This node has 256 /// the same semantics as SCALAR_TO_VECTOR except that the value remains in 257 /// the aforementioned location in the vector register. 258 SCALAR_TO_VECTOR_PERMUTED, 259 260 // FIXME: Remove these once the ANDI glue bug is fixed: 261 /// i1 = ANDI_rec_1_[EQ|GT]_BIT(i32 or i64 x) - Represents the result of the 262 /// eq or gt bit of CR0 after executing andi. x, 1. This is used to 263 /// implement truncation of i32 or i64 to i1. 264 ANDI_rec_1_EQ_BIT, 265 ANDI_rec_1_GT_BIT, 266 267 // READ_TIME_BASE - A read of the 64-bit time-base register on a 32-bit 268 // target (returns (Lo, Hi)). It takes a chain operand. 269 READ_TIME_BASE, 270 271 // EH_SJLJ_SETJMP - SjLj exception handling setjmp. 272 EH_SJLJ_SETJMP, 273 274 // EH_SJLJ_LONGJMP - SjLj exception handling longjmp. 275 EH_SJLJ_LONGJMP, 276 277 /// RESVEC = VCMP(LHS, RHS, OPC) - Represents one of the altivec VCMP* 278 /// instructions. For lack of better number, we use the opcode number 279 /// encoding for the OPC field to identify the compare. For example, 838 280 /// is VCMPGTSH. 281 VCMP, 282 283 /// RESVEC, OUTFLAG = VCMP_rec(LHS, RHS, OPC) - Represents one of the 284 /// altivec VCMP*_rec instructions. For lack of better number, we use the 285 /// opcode number encoding for the OPC field to identify the compare. For 286 /// example, 838 is VCMPGTSH. 287 VCMP_rec, 288 289 /// CHAIN = COND_BRANCH CHAIN, CRRC, OPC, DESTBB [, INFLAG] - This 290 /// corresponds to the COND_BRANCH pseudo instruction. CRRC is the 291 /// condition register to branch on, OPC is the branch opcode to use (e.g. 292 /// PPC::BLE), DESTBB is the destination block to branch to, and INFLAG is 293 /// an optional input flag argument. 294 COND_BRANCH, 295 296 /// CHAIN = BDNZ CHAIN, DESTBB - These are used to create counter-based 297 /// loops. 298 BDNZ, 299 BDZ, 300 301 /// F8RC = FADDRTZ F8RC, F8RC - This is an FADD done with rounding 302 /// towards zero. Used only as part of the long double-to-int 303 /// conversion sequence. 304 FADDRTZ, 305 306 /// F8RC = MFFS - This moves the FPSCR (not modeled) into the register. 307 MFFS, 308 309 /// TC_RETURN - A tail call return. 310 /// operand #0 chain 311 /// operand #1 callee (register or absolute) 312 /// operand #2 stack adjustment 313 /// operand #3 optional in flag 314 TC_RETURN, 315 316 /// ch, gl = CR6[UN]SET ch, inglue - Toggle CR bit 6 for SVR4 vararg calls 317 CR6SET, 318 CR6UNSET, 319 320 /// GPRC = address of _GLOBAL_OFFSET_TABLE_. Used by initial-exec TLS 321 /// for non-position independent code on PPC32. 322 PPC32_GOT, 323 324 /// GPRC = address of _GLOBAL_OFFSET_TABLE_. Used by general dynamic and 325 /// local dynamic TLS and position indendepent code on PPC32. 326 PPC32_PICGOT, 327 328 /// G8RC = ADDIS_GOT_TPREL_HA %x2, Symbol - Used by the initial-exec 329 /// TLS model, produces an ADDIS8 instruction that adds the GOT 330 /// base to sym\@got\@tprel\@ha. 331 ADDIS_GOT_TPREL_HA, 332 333 /// G8RC = LD_GOT_TPREL_L Symbol, G8RReg - Used by the initial-exec 334 /// TLS model, produces a LD instruction with base register G8RReg 335 /// and offset sym\@got\@tprel\@l. This completes the addition that 336 /// finds the offset of "sym" relative to the thread pointer. 337 LD_GOT_TPREL_L, 338 339 /// G8RC = ADD_TLS G8RReg, Symbol - Used by the initial-exec TLS 340 /// model, produces an ADD instruction that adds the contents of 341 /// G8RReg to the thread pointer. Symbol contains a relocation 342 /// sym\@tls which is to be replaced by the thread pointer and 343 /// identifies to the linker that the instruction is part of a 344 /// TLS sequence. 345 ADD_TLS, 346 347 /// G8RC = ADDIS_TLSGD_HA %x2, Symbol - For the general-dynamic TLS 348 /// model, produces an ADDIS8 instruction that adds the GOT base 349 /// register to sym\@got\@tlsgd\@ha. 350 ADDIS_TLSGD_HA, 351 352 /// %x3 = ADDI_TLSGD_L G8RReg, Symbol - For the general-dynamic TLS 353 /// model, produces an ADDI8 instruction that adds G8RReg to 354 /// sym\@got\@tlsgd\@l and stores the result in X3. Hidden by 355 /// ADDIS_TLSGD_L_ADDR until after register assignment. 356 ADDI_TLSGD_L, 357 358 /// %x3 = GET_TLS_ADDR %x3, Symbol - For the general-dynamic TLS 359 /// model, produces a call to __tls_get_addr(sym\@tlsgd). Hidden by 360 /// ADDIS_TLSGD_L_ADDR until after register assignment. 361 GET_TLS_ADDR, 362 363 /// G8RC = ADDI_TLSGD_L_ADDR G8RReg, Symbol, Symbol - Op that 364 /// combines ADDI_TLSGD_L and GET_TLS_ADDR until expansion following 365 /// register assignment. 366 ADDI_TLSGD_L_ADDR, 367 368 /// GPRC = TLSGD_AIX, TOC_ENTRY, TOC_ENTRY 369 /// G8RC = TLSGD_AIX, TOC_ENTRY, TOC_ENTRY 370 /// Op that combines two register copies of TOC entries 371 /// (region handle into R3 and variable offset into R4) followed by a 372 /// GET_TLS_ADDR node which will be expanded to a call to __get_tls_addr. 373 /// This node is used in 64-bit mode as well (in which case the result is 374 /// G8RC and inputs are X3/X4). 375 TLSGD_AIX, 376 377 /// G8RC = ADDIS_TLSLD_HA %x2, Symbol - For the local-dynamic TLS 378 /// model, produces an ADDIS8 instruction that adds the GOT base 379 /// register to sym\@got\@tlsld\@ha. 380 ADDIS_TLSLD_HA, 381 382 /// %x3 = ADDI_TLSLD_L G8RReg, Symbol - For the local-dynamic TLS 383 /// model, produces an ADDI8 instruction that adds G8RReg to 384 /// sym\@got\@tlsld\@l and stores the result in X3. Hidden by 385 /// ADDIS_TLSLD_L_ADDR until after register assignment. 386 ADDI_TLSLD_L, 387 388 /// %x3 = GET_TLSLD_ADDR %x3, Symbol - For the local-dynamic TLS 389 /// model, produces a call to __tls_get_addr(sym\@tlsld). Hidden by 390 /// ADDIS_TLSLD_L_ADDR until after register assignment. 391 GET_TLSLD_ADDR, 392 393 /// G8RC = ADDI_TLSLD_L_ADDR G8RReg, Symbol, Symbol - Op that 394 /// combines ADDI_TLSLD_L and GET_TLSLD_ADDR until expansion 395 /// following register assignment. 396 ADDI_TLSLD_L_ADDR, 397 398 /// G8RC = ADDIS_DTPREL_HA %x3, Symbol - For the local-dynamic TLS 399 /// model, produces an ADDIS8 instruction that adds X3 to 400 /// sym\@dtprel\@ha. 401 ADDIS_DTPREL_HA, 402 403 /// G8RC = ADDI_DTPREL_L G8RReg, Symbol - For the local-dynamic TLS 404 /// model, produces an ADDI8 instruction that adds G8RReg to 405 /// sym\@got\@dtprel\@l. 406 ADDI_DTPREL_L, 407 408 /// G8RC = PADDI_DTPREL %x3, Symbol - For the pc-rel based local-dynamic TLS 409 /// model, produces a PADDI8 instruction that adds X3 to sym\@dtprel. 410 PADDI_DTPREL, 411 412 /// VRRC = VADD_SPLAT Elt, EltSize - Temporary node to be expanded 413 /// during instruction selection to optimize a BUILD_VECTOR into 414 /// operations on splats. This is necessary to avoid losing these 415 /// optimizations due to constant folding. 416 VADD_SPLAT, 417 418 /// CHAIN = SC CHAIN, Imm128 - System call. The 7-bit unsigned 419 /// operand identifies the operating system entry point. 420 SC, 421 422 /// CHAIN = CLRBHRB CHAIN - Clear branch history rolling buffer. 423 CLRBHRB, 424 425 /// GPRC, CHAIN = MFBHRBE CHAIN, Entry, Dummy - Move from branch 426 /// history rolling buffer entry. 427 MFBHRBE, 428 429 /// CHAIN = RFEBB CHAIN, State - Return from event-based branch. 430 RFEBB, 431 432 /// VSRC, CHAIN = XXSWAPD CHAIN, VSRC - Occurs only for little 433 /// endian. Maps to an xxswapd instruction that corrects an lxvd2x 434 /// or stxvd2x instruction. The chain is necessary because the 435 /// sequence replaces a load and needs to provide the same number 436 /// of outputs. 437 XXSWAPD, 438 439 /// An SDNode for swaps that are not associated with any loads/stores 440 /// and thereby have no chain. 441 SWAP_NO_CHAIN, 442 443 /// FP_EXTEND_HALF(VECTOR, IDX) - Custom extend upper (IDX=0) half or 444 /// lower (IDX=1) half of v4f32 to v2f64. 445 FP_EXTEND_HALF, 446 447 /// MAT_PCREL_ADDR = Materialize a PC Relative address. This can be done 448 /// either through an add like PADDI or through a PC Relative load like 449 /// PLD. 450 MAT_PCREL_ADDR, 451 452 /// TLS_DYNAMIC_MAT_PCREL_ADDR = Materialize a PC Relative address for 453 /// TLS global address when using dynamic access models. This can be done 454 /// through an add like PADDI. 455 TLS_DYNAMIC_MAT_PCREL_ADDR, 456 457 /// TLS_LOCAL_EXEC_MAT_ADDR = Materialize an address for TLS global address 458 /// when using local exec access models, and when prefixed instructions are 459 /// available. This is used with ADD_TLS to produce an add like PADDI. 460 TLS_LOCAL_EXEC_MAT_ADDR, 461 462 /// ACC_BUILD = Build an accumulator register from 4 VSX registers. 463 ACC_BUILD, 464 465 /// PAIR_BUILD = Build a vector pair register from 2 VSX registers. 466 PAIR_BUILD, 467 468 /// EXTRACT_VSX_REG = Extract one of the underlying vsx registers of 469 /// an accumulator or pair register. This node is needed because 470 /// EXTRACT_SUBVECTOR expects the input and output vectors to have the same 471 /// element type. 472 EXTRACT_VSX_REG, 473 474 /// XXMFACC = This corresponds to the xxmfacc instruction. 475 XXMFACC, 476 477 // Constrained conversion from floating point to int 478 STRICT_FCTIDZ = ISD::FIRST_TARGET_STRICTFP_OPCODE, 479 STRICT_FCTIWZ, 480 STRICT_FCTIDUZ, 481 STRICT_FCTIWUZ, 482 483 /// Constrained integer-to-floating-point conversion instructions. 484 STRICT_FCFID, 485 STRICT_FCFIDU, 486 STRICT_FCFIDS, 487 STRICT_FCFIDUS, 488 489 /// Constrained floating point add in round-to-zero mode. 490 STRICT_FADDRTZ, 491 492 // NOTE: The nodes below may require PC-Rel specific patterns if the 493 // address could be PC-Relative. When adding new nodes below, consider 494 // whether or not the address can be PC-Relative and add the corresponding 495 // PC-relative patterns and tests. 496 497 /// CHAIN = STBRX CHAIN, GPRC, Ptr, Type - This is a 498 /// byte-swapping store instruction. It byte-swaps the low "Type" bits of 499 /// the GPRC input, then stores it through Ptr. Type can be either i16 or 500 /// i32. 501 STBRX = ISD::FIRST_TARGET_MEMORY_OPCODE, 502 503 /// GPRC, CHAIN = LBRX CHAIN, Ptr, Type - This is a 504 /// byte-swapping load instruction. It loads "Type" bits, byte swaps it, 505 /// then puts it in the bottom bits of the GPRC. TYPE can be either i16 506 /// or i32. 507 LBRX, 508 509 /// STFIWX - The STFIWX instruction. The first operand is an input token 510 /// chain, then an f64 value to store, then an address to store it to. 511 STFIWX, 512 513 /// GPRC, CHAIN = LFIWAX CHAIN, Ptr - This is a floating-point 514 /// load which sign-extends from a 32-bit integer value into the 515 /// destination 64-bit register. 516 LFIWAX, 517 518 /// GPRC, CHAIN = LFIWZX CHAIN, Ptr - This is a floating-point 519 /// load which zero-extends from a 32-bit integer value into the 520 /// destination 64-bit register. 521 LFIWZX, 522 523 /// GPRC, CHAIN = LXSIZX, CHAIN, Ptr, ByteWidth - This is a load of an 524 /// integer smaller than 64 bits into a VSR. The integer is zero-extended. 525 /// This can be used for converting loaded integers to floating point. 526 LXSIZX, 527 528 /// STXSIX - The STXSI[bh]X instruction. The first operand is an input 529 /// chain, then an f64 value to store, then an address to store it to, 530 /// followed by a byte-width for the store. 531 STXSIX, 532 533 /// VSRC, CHAIN = LXVD2X_LE CHAIN, Ptr - Occurs only for little endian. 534 /// Maps directly to an lxvd2x instruction that will be followed by 535 /// an xxswapd. 536 LXVD2X, 537 538 /// LXVRZX - Load VSX Vector Rightmost and Zero Extend 539 /// This node represents v1i128 BUILD_VECTOR of a zero extending load 540 /// instruction from <byte, halfword, word, or doubleword> to i128. 541 /// Allows utilization of the Load VSX Vector Rightmost Instructions. 542 LXVRZX, 543 544 /// VSRC, CHAIN = LOAD_VEC_BE CHAIN, Ptr - Occurs only for little endian. 545 /// Maps directly to one of lxvd2x/lxvw4x/lxvh8x/lxvb16x depending on 546 /// the vector type to load vector in big-endian element order. 547 LOAD_VEC_BE, 548 549 /// VSRC, CHAIN = LD_VSX_LH CHAIN, Ptr - This is a floating-point load of a 550 /// v2f32 value into the lower half of a VSR register. 551 LD_VSX_LH, 552 553 /// VSRC, CHAIN = LD_SPLAT, CHAIN, Ptr - a splatting load memory 554 /// instructions such as LXVDSX, LXVWSX. 555 LD_SPLAT, 556 557 /// VSRC, CHAIN = ZEXT_LD_SPLAT, CHAIN, Ptr - a splatting load memory 558 /// that zero-extends. 559 ZEXT_LD_SPLAT, 560 561 /// VSRC, CHAIN = SEXT_LD_SPLAT, CHAIN, Ptr - a splatting load memory 562 /// that sign-extends. 563 SEXT_LD_SPLAT, 564 565 /// CHAIN = STXVD2X CHAIN, VSRC, Ptr - Occurs only for little endian. 566 /// Maps directly to an stxvd2x instruction that will be preceded by 567 /// an xxswapd. 568 STXVD2X, 569 570 /// CHAIN = STORE_VEC_BE CHAIN, VSRC, Ptr - Occurs only for little endian. 571 /// Maps directly to one of stxvd2x/stxvw4x/stxvh8x/stxvb16x depending on 572 /// the vector type to store vector in big-endian element order. 573 STORE_VEC_BE, 574 575 /// Store scalar integers from VSR. 576 ST_VSR_SCAL_INT, 577 578 /// ATOMIC_CMP_SWAP - the exact same as the target-independent nodes 579 /// except they ensure that the compare input is zero-extended for 580 /// sub-word versions because the atomic loads zero-extend. 581 ATOMIC_CMP_SWAP_8, 582 ATOMIC_CMP_SWAP_16, 583 584 /// CHAIN,Glue = STORE_COND CHAIN, GPR, Ptr 585 /// The store conditional instruction ST[BHWD]ARX that produces a glue 586 /// result to attach it to a conditional branch. 587 STORE_COND, 588 589 /// GPRC = TOC_ENTRY GA, TOC 590 /// Loads the entry for GA from the TOC, where the TOC base is given by 591 /// the last operand. 592 TOC_ENTRY 593 }; 594 595 } // end namespace PPCISD 596 597 /// Define some predicates that are used for node matching. 598 namespace PPC { 599 600 /// isVPKUHUMShuffleMask - Return true if this is the shuffle mask for a 601 /// VPKUHUM instruction. 602 bool isVPKUHUMShuffleMask(ShuffleVectorSDNode *N, unsigned ShuffleKind, 603 SelectionDAG &DAG); 604 605 /// isVPKUWUMShuffleMask - Return true if this is the shuffle mask for a 606 /// VPKUWUM instruction. 607 bool isVPKUWUMShuffleMask(ShuffleVectorSDNode *N, unsigned ShuffleKind, 608 SelectionDAG &DAG); 609 610 /// isVPKUDUMShuffleMask - Return true if this is the shuffle mask for a 611 /// VPKUDUM instruction. 612 bool isVPKUDUMShuffleMask(ShuffleVectorSDNode *N, unsigned ShuffleKind, 613 SelectionDAG &DAG); 614 615 /// isVMRGLShuffleMask - Return true if this is a shuffle mask suitable for 616 /// a VRGL* instruction with the specified unit size (1,2 or 4 bytes). 617 bool isVMRGLShuffleMask(ShuffleVectorSDNode *N, unsigned UnitSize, 618 unsigned ShuffleKind, SelectionDAG &DAG); 619 620 /// isVMRGHShuffleMask - Return true if this is a shuffle mask suitable for 621 /// a VRGH* instruction with the specified unit size (1,2 or 4 bytes). 622 bool isVMRGHShuffleMask(ShuffleVectorSDNode *N, unsigned UnitSize, 623 unsigned ShuffleKind, SelectionDAG &DAG); 624 625 /// isVMRGEOShuffleMask - Return true if this is a shuffle mask suitable for 626 /// a VMRGEW or VMRGOW instruction 627 bool isVMRGEOShuffleMask(ShuffleVectorSDNode *N, bool CheckEven, 628 unsigned ShuffleKind, SelectionDAG &DAG); 629 /// isXXSLDWIShuffleMask - Return true if this is a shuffle mask suitable 630 /// for a XXSLDWI instruction. 631 bool isXXSLDWIShuffleMask(ShuffleVectorSDNode *N, unsigned &ShiftElts, 632 bool &Swap, bool IsLE); 633 634 /// isXXBRHShuffleMask - Return true if this is a shuffle mask suitable 635 /// for a XXBRH instruction. 636 bool isXXBRHShuffleMask(ShuffleVectorSDNode *N); 637 638 /// isXXBRWShuffleMask - Return true if this is a shuffle mask suitable 639 /// for a XXBRW instruction. 640 bool isXXBRWShuffleMask(ShuffleVectorSDNode *N); 641 642 /// isXXBRDShuffleMask - Return true if this is a shuffle mask suitable 643 /// for a XXBRD instruction. 644 bool isXXBRDShuffleMask(ShuffleVectorSDNode *N); 645 646 /// isXXBRQShuffleMask - Return true if this is a shuffle mask suitable 647 /// for a XXBRQ instruction. 648 bool isXXBRQShuffleMask(ShuffleVectorSDNode *N); 649 650 /// isXXPERMDIShuffleMask - Return true if this is a shuffle mask suitable 651 /// for a XXPERMDI instruction. 652 bool isXXPERMDIShuffleMask(ShuffleVectorSDNode *N, unsigned &ShiftElts, 653 bool &Swap, bool IsLE); 654 655 /// isVSLDOIShuffleMask - If this is a vsldoi shuffle mask, return the 656 /// shift amount, otherwise return -1. 657 int isVSLDOIShuffleMask(SDNode *N, unsigned ShuffleKind, 658 SelectionDAG &DAG); 659 660 /// isSplatShuffleMask - Return true if the specified VECTOR_SHUFFLE operand 661 /// specifies a splat of a single element that is suitable for input to 662 /// VSPLTB/VSPLTH/VSPLTW. 663 bool isSplatShuffleMask(ShuffleVectorSDNode *N, unsigned EltSize); 664 665 /// isXXINSERTWMask - Return true if this VECTOR_SHUFFLE can be handled by 666 /// the XXINSERTW instruction introduced in ISA 3.0. This is essentially any 667 /// shuffle of v4f32/v4i32 vectors that just inserts one element from one 668 /// vector into the other. This function will also set a couple of 669 /// output parameters for how much the source vector needs to be shifted and 670 /// what byte number needs to be specified for the instruction to put the 671 /// element in the desired location of the target vector. 672 bool isXXINSERTWMask(ShuffleVectorSDNode *N, unsigned &ShiftElts, 673 unsigned &InsertAtByte, bool &Swap, bool IsLE); 674 675 /// getSplatIdxForPPCMnemonics - Return the splat index as a value that is 676 /// appropriate for PPC mnemonics (which have a big endian bias - namely 677 /// elements are counted from the left of the vector register). 678 unsigned getSplatIdxForPPCMnemonics(SDNode *N, unsigned EltSize, 679 SelectionDAG &DAG); 680 681 /// get_VSPLTI_elt - If this is a build_vector of constants which can be 682 /// formed by using a vspltis[bhw] instruction of the specified element 683 /// size, return the constant being splatted. The ByteSize field indicates 684 /// the number of bytes of each element [124] -> [bhw]. 685 SDValue get_VSPLTI_elt(SDNode *N, unsigned ByteSize, SelectionDAG &DAG); 686 687 // Flags for computing the optimal addressing mode for loads and stores. 688 enum MemOpFlags { 689 MOF_None = 0, 690 691 // Extension mode for integer loads. 692 MOF_SExt = 1, 693 MOF_ZExt = 1 << 1, 694 MOF_NoExt = 1 << 2, 695 696 // Address computation flags. 697 MOF_NotAddNorCst = 1 << 5, // Not const. or sum of ptr and scalar. 698 MOF_RPlusSImm16 = 1 << 6, // Reg plus signed 16-bit constant. 699 MOF_RPlusLo = 1 << 7, // Reg plus signed 16-bit relocation 700 MOF_RPlusSImm16Mult4 = 1 << 8, // Reg plus 16-bit signed multiple of 4. 701 MOF_RPlusSImm16Mult16 = 1 << 9, // Reg plus 16-bit signed multiple of 16. 702 MOF_RPlusSImm34 = 1 << 10, // Reg plus 34-bit signed constant. 703 MOF_RPlusR = 1 << 11, // Sum of two variables. 704 MOF_PCRel = 1 << 12, // PC-Relative relocation. 705 MOF_AddrIsSImm32 = 1 << 13, // A simple 32-bit constant. 706 707 // The in-memory type. 708 MOF_SubWordInt = 1 << 15, 709 MOF_WordInt = 1 << 16, 710 MOF_DoubleWordInt = 1 << 17, 711 MOF_ScalarFloat = 1 << 18, // Scalar single or double precision. 712 MOF_Vector = 1 << 19, // Vector types and quad precision scalars. 713 MOF_Vector256 = 1 << 20, 714 715 // Subtarget features. 716 MOF_SubtargetBeforeP9 = 1 << 22, 717 MOF_SubtargetP9 = 1 << 23, 718 MOF_SubtargetP10 = 1 << 24, 719 MOF_SubtargetSPE = 1 << 25 720 }; 721 722 // The addressing modes for loads and stores. 723 enum AddrMode { 724 AM_None, 725 AM_DForm, 726 AM_DSForm, 727 AM_DQForm, 728 AM_PrefixDForm, 729 AM_XForm, 730 AM_PCRel 731 }; 732 } // end namespace PPC 733 734 class PPCTargetLowering : public TargetLowering { 735 const PPCSubtarget &Subtarget; 736 737 public: 738 explicit PPCTargetLowering(const PPCTargetMachine &TM, 739 const PPCSubtarget &STI); 740 741 /// getTargetNodeName() - This method returns the name of a target specific 742 /// DAG node. 743 const char *getTargetNodeName(unsigned Opcode) const override; 744 745 bool isSelectSupported(SelectSupportKind Kind) const override { 746 // PowerPC does not support scalar condition selects on vectors. 747 return (Kind != SelectSupportKind::ScalarCondVectorVal); 748 } 749 750 /// getPreferredVectorAction - The code we generate when vector types are 751 /// legalized by promoting the integer element type is often much worse 752 /// than code we generate if we widen the type for applicable vector types. 753 /// The issue with promoting is that the vector is scalaraized, individual 754 /// elements promoted and then the vector is rebuilt. So say we load a pair 755 /// of v4i8's and shuffle them. This will turn into a mess of 8 extending 756 /// loads, moves back into VSR's (or memory ops if we don't have moves) and 757 /// then the VPERM for the shuffle. All in all a very slow sequence. 758 TargetLoweringBase::LegalizeTypeAction getPreferredVectorAction(MVT VT) 759 const override { 760 // Default handling for scalable and single-element vectors. 761 if (VT.isScalableVector() || VT.getVectorNumElements() == 1) 762 return TargetLoweringBase::getPreferredVectorAction(VT); 763 764 // Split and promote vNi1 vectors so we don't produce v256i1/v512i1 765 // types as those are only for MMA instructions. 766 if (VT.getScalarSizeInBits() == 1 && VT.getSizeInBits() > 16) 767 return TypeSplitVector; 768 if (VT.getScalarSizeInBits() == 1) 769 return TypePromoteInteger; 770 771 // Widen vectors that have reasonably sized elements. 772 if (VT.getScalarSizeInBits() % 8 == 0) 773 return TypeWidenVector; 774 return TargetLoweringBase::getPreferredVectorAction(VT); 775 } 776 777 bool useSoftFloat() const override; 778 779 bool hasSPE() const; 780 781 MVT getScalarShiftAmountTy(const DataLayout &, EVT) const override { 782 return MVT::i32; 783 } 784 785 bool isCheapToSpeculateCttz(Type *Ty) const override { 786 return true; 787 } 788 789 bool isCheapToSpeculateCtlz(Type *Ty) const override { 790 return true; 791 } 792 793 bool isCtlzFast() const override { 794 return true; 795 } 796 797 bool isEqualityCmpFoldedWithSignedCmp() const override { 798 return false; 799 } 800 801 bool hasAndNotCompare(SDValue) const override { 802 return true; 803 } 804 805 bool preferIncOfAddToSubOfNot(EVT VT) const override; 806 807 bool convertSetCCLogicToBitwiseLogic(EVT VT) const override { 808 return VT.isScalarInteger(); 809 } 810 811 SDValue getNegatedExpression(SDValue Op, SelectionDAG &DAG, bool LegalOps, 812 bool OptForSize, NegatibleCost &Cost, 813 unsigned Depth = 0) const override; 814 815 /// getSetCCResultType - Return the ISD::SETCC ValueType 816 EVT getSetCCResultType(const DataLayout &DL, LLVMContext &Context, 817 EVT VT) const override; 818 819 /// Return true if target always benefits from combining into FMA for a 820 /// given value type. This must typically return false on targets where FMA 821 /// takes more cycles to execute than FADD. 822 bool enableAggressiveFMAFusion(EVT VT) const override; 823 824 /// getPreIndexedAddressParts - returns true by value, base pointer and 825 /// offset pointer and addressing mode by reference if the node's address 826 /// can be legally represented as pre-indexed load / store address. 827 bool getPreIndexedAddressParts(SDNode *N, SDValue &Base, 828 SDValue &Offset, 829 ISD::MemIndexedMode &AM, 830 SelectionDAG &DAG) const override; 831 832 /// SelectAddressEVXRegReg - Given the specified addressed, check to see if 833 /// it can be more efficiently represented as [r+imm]. 834 bool SelectAddressEVXRegReg(SDValue N, SDValue &Base, SDValue &Index, 835 SelectionDAG &DAG) const; 836 837 /// SelectAddressRegReg - Given the specified addressed, check to see if it 838 /// can be more efficiently represented as [r+imm]. If \p EncodingAlignment 839 /// is non-zero, only accept displacement which is not suitable for [r+imm]. 840 /// Returns false if it can be represented by [r+imm], which are preferred. 841 bool SelectAddressRegReg(SDValue N, SDValue &Base, SDValue &Index, 842 SelectionDAG &DAG, 843 MaybeAlign EncodingAlignment = std::nullopt) const; 844 845 /// SelectAddressRegImm - Returns true if the address N can be represented 846 /// by a base register plus a signed 16-bit displacement [r+imm], and if it 847 /// is not better represented as reg+reg. If \p EncodingAlignment is 848 /// non-zero, only accept displacements suitable for instruction encoding 849 /// requirement, i.e. multiples of 4 for DS form. 850 bool SelectAddressRegImm(SDValue N, SDValue &Disp, SDValue &Base, 851 SelectionDAG &DAG, 852 MaybeAlign EncodingAlignment) const; 853 bool SelectAddressRegImm34(SDValue N, SDValue &Disp, SDValue &Base, 854 SelectionDAG &DAG) const; 855 856 /// SelectAddressRegRegOnly - Given the specified addressed, force it to be 857 /// represented as an indexed [r+r] operation. 858 bool SelectAddressRegRegOnly(SDValue N, SDValue &Base, SDValue &Index, 859 SelectionDAG &DAG) const; 860 861 /// SelectAddressPCRel - Represent the specified address as pc relative to 862 /// be represented as [pc+imm] 863 bool SelectAddressPCRel(SDValue N, SDValue &Base) const; 864 865 Sched::Preference getSchedulingPreference(SDNode *N) const override; 866 867 /// LowerOperation - Provide custom lowering hooks for some operations. 868 /// 869 SDValue LowerOperation(SDValue Op, SelectionDAG &DAG) const override; 870 871 /// ReplaceNodeResults - Replace the results of node with an illegal result 872 /// type with new values built out of custom code. 873 /// 874 void ReplaceNodeResults(SDNode *N, SmallVectorImpl<SDValue>&Results, 875 SelectionDAG &DAG) const override; 876 877 SDValue expandVSXLoadForLE(SDNode *N, DAGCombinerInfo &DCI) const; 878 SDValue expandVSXStoreForLE(SDNode *N, DAGCombinerInfo &DCI) const; 879 880 SDValue PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const override; 881 882 SDValue BuildSDIVPow2(SDNode *N, const APInt &Divisor, SelectionDAG &DAG, 883 SmallVectorImpl<SDNode *> &Created) const override; 884 885 Register getRegisterByName(const char* RegName, LLT VT, 886 const MachineFunction &MF) const override; 887 888 void computeKnownBitsForTargetNode(const SDValue Op, 889 KnownBits &Known, 890 const APInt &DemandedElts, 891 const SelectionDAG &DAG, 892 unsigned Depth = 0) const override; 893 894 Align getPrefLoopAlignment(MachineLoop *ML) const override; 895 896 bool shouldInsertFencesForAtomic(const Instruction *I) const override { 897 return true; 898 } 899 900 Instruction *emitLeadingFence(IRBuilderBase &Builder, Instruction *Inst, 901 AtomicOrdering Ord) const override; 902 Instruction *emitTrailingFence(IRBuilderBase &Builder, Instruction *Inst, 903 AtomicOrdering Ord) const override; 904 905 bool shouldInlineQuadwordAtomics() const; 906 907 TargetLowering::AtomicExpansionKind 908 shouldExpandAtomicRMWInIR(AtomicRMWInst *AI) const override; 909 910 TargetLowering::AtomicExpansionKind 911 shouldExpandAtomicCmpXchgInIR(AtomicCmpXchgInst *AI) const override; 912 913 Value *emitMaskedAtomicRMWIntrinsic(IRBuilderBase &Builder, 914 AtomicRMWInst *AI, Value *AlignedAddr, 915 Value *Incr, Value *Mask, 916 Value *ShiftAmt, 917 AtomicOrdering Ord) const override; 918 Value *emitMaskedAtomicCmpXchgIntrinsic(IRBuilderBase &Builder, 919 AtomicCmpXchgInst *CI, 920 Value *AlignedAddr, Value *CmpVal, 921 Value *NewVal, Value *Mask, 922 AtomicOrdering Ord) const override; 923 924 MachineBasicBlock * 925 EmitInstrWithCustomInserter(MachineInstr &MI, 926 MachineBasicBlock *MBB) const override; 927 MachineBasicBlock *EmitAtomicBinary(MachineInstr &MI, 928 MachineBasicBlock *MBB, 929 unsigned AtomicSize, 930 unsigned BinOpcode, 931 unsigned CmpOpcode = 0, 932 unsigned CmpPred = 0) const; 933 MachineBasicBlock *EmitPartwordAtomicBinary(MachineInstr &MI, 934 MachineBasicBlock *MBB, 935 bool is8bit, 936 unsigned Opcode, 937 unsigned CmpOpcode = 0, 938 unsigned CmpPred = 0) const; 939 940 MachineBasicBlock *emitEHSjLjSetJmp(MachineInstr &MI, 941 MachineBasicBlock *MBB) const; 942 943 MachineBasicBlock *emitEHSjLjLongJmp(MachineInstr &MI, 944 MachineBasicBlock *MBB) const; 945 946 MachineBasicBlock *emitProbedAlloca(MachineInstr &MI, 947 MachineBasicBlock *MBB) const; 948 949 bool hasInlineStackProbe(const MachineFunction &MF) const override; 950 951 unsigned getStackProbeSize(const MachineFunction &MF) const; 952 953 ConstraintType getConstraintType(StringRef Constraint) const override; 954 955 /// Examine constraint string and operand type and determine a weight value. 956 /// The operand object must already have been set up with the operand type. 957 ConstraintWeight getSingleConstraintMatchWeight( 958 AsmOperandInfo &info, const char *constraint) const override; 959 960 std::pair<unsigned, const TargetRegisterClass *> 961 getRegForInlineAsmConstraint(const TargetRegisterInfo *TRI, 962 StringRef Constraint, MVT VT) const override; 963 964 /// getByValTypeAlignment - Return the desired alignment for ByVal aggregate 965 /// function arguments in the caller parameter area. This is the actual 966 /// alignment, not its logarithm. 967 uint64_t getByValTypeAlignment(Type *Ty, 968 const DataLayout &DL) const override; 969 970 /// LowerAsmOperandForConstraint - Lower the specified operand into the Ops 971 /// vector. If it is invalid, don't add anything to Ops. 972 void LowerAsmOperandForConstraint(SDValue Op, 973 std::string &Constraint, 974 std::vector<SDValue> &Ops, 975 SelectionDAG &DAG) const override; 976 977 unsigned 978 getInlineAsmMemConstraint(StringRef ConstraintCode) const override { 979 if (ConstraintCode == "es") 980 return InlineAsm::Constraint_es; 981 else if (ConstraintCode == "Q") 982 return InlineAsm::Constraint_Q; 983 else if (ConstraintCode == "Z") 984 return InlineAsm::Constraint_Z; 985 else if (ConstraintCode == "Zy") 986 return InlineAsm::Constraint_Zy; 987 return TargetLowering::getInlineAsmMemConstraint(ConstraintCode); 988 } 989 990 void CollectTargetIntrinsicOperands(const CallInst &I, 991 SmallVectorImpl<SDValue> &Ops, 992 SelectionDAG &DAG) const override; 993 994 /// isLegalAddressingMode - Return true if the addressing mode represented 995 /// by AM is legal for this target, for a load/store of the specified type. 996 bool isLegalAddressingMode(const DataLayout &DL, const AddrMode &AM, 997 Type *Ty, unsigned AS, 998 Instruction *I = nullptr) const override; 999 1000 /// isLegalICmpImmediate - Return true if the specified immediate is legal 1001 /// icmp immediate, that is the target has icmp instructions which can 1002 /// compare a register against the immediate without having to materialize 1003 /// the immediate into a register. 1004 bool isLegalICmpImmediate(int64_t Imm) const override; 1005 1006 /// isLegalAddImmediate - Return true if the specified immediate is legal 1007 /// add immediate, that is the target has add instructions which can 1008 /// add a register and the immediate without having to materialize 1009 /// the immediate into a register. 1010 bool isLegalAddImmediate(int64_t Imm) const override; 1011 1012 /// isTruncateFree - Return true if it's free to truncate a value of 1013 /// type Ty1 to type Ty2. e.g. On PPC it's free to truncate a i64 value in 1014 /// register X1 to i32 by referencing its sub-register R1. 1015 bool isTruncateFree(Type *Ty1, Type *Ty2) const override; 1016 bool isTruncateFree(EVT VT1, EVT VT2) const override; 1017 1018 bool isZExtFree(SDValue Val, EVT VT2) const override; 1019 1020 bool isFPExtFree(EVT DestVT, EVT SrcVT) const override; 1021 1022 /// Returns true if it is beneficial to convert a load of a constant 1023 /// to just the constant itself. 1024 bool shouldConvertConstantLoadToIntImm(const APInt &Imm, 1025 Type *Ty) const override; 1026 1027 bool convertSelectOfConstantsToMath(EVT VT) const override { 1028 return true; 1029 } 1030 1031 bool decomposeMulByConstant(LLVMContext &Context, EVT VT, 1032 SDValue C) const override; 1033 1034 bool isDesirableToTransformToIntegerOp(unsigned Opc, 1035 EVT VT) const override { 1036 // Only handle float load/store pair because float(fpr) load/store 1037 // instruction has more cycles than integer(gpr) load/store in PPC. 1038 if (Opc != ISD::LOAD && Opc != ISD::STORE) 1039 return false; 1040 if (VT != MVT::f32 && VT != MVT::f64) 1041 return false; 1042 1043 return true; 1044 } 1045 1046 // Returns true if the address of the global is stored in TOC entry. 1047 bool isAccessedAsGotIndirect(SDValue N) const; 1048 1049 bool isOffsetFoldingLegal(const GlobalAddressSDNode *GA) const override; 1050 1051 bool getTgtMemIntrinsic(IntrinsicInfo &Info, 1052 const CallInst &I, 1053 MachineFunction &MF, 1054 unsigned Intrinsic) const override; 1055 1056 /// It returns EVT::Other if the type should be determined using generic 1057 /// target-independent logic. 1058 EVT getOptimalMemOpType(const MemOp &Op, 1059 const AttributeList &FuncAttributes) const override; 1060 1061 /// Is unaligned memory access allowed for the given type, and is it fast 1062 /// relative to software emulation. 1063 bool allowsMisalignedMemoryAccesses( 1064 EVT VT, unsigned AddrSpace, Align Alignment = Align(1), 1065 MachineMemOperand::Flags Flags = MachineMemOperand::MONone, 1066 unsigned *Fast = nullptr) const override; 1067 1068 /// isFMAFasterThanFMulAndFAdd - Return true if an FMA operation is faster 1069 /// than a pair of fmul and fadd instructions. fmuladd intrinsics will be 1070 /// expanded to FMAs when this method returns true, otherwise fmuladd is 1071 /// expanded to fmul + fadd. 1072 bool isFMAFasterThanFMulAndFAdd(const MachineFunction &MF, 1073 EVT VT) const override; 1074 1075 bool isFMAFasterThanFMulAndFAdd(const Function &F, Type *Ty) const override; 1076 1077 /// isProfitableToHoist - Check if it is profitable to hoist instruction 1078 /// \p I to its dominator block. 1079 /// For example, it is not profitable if \p I and it's only user can form a 1080 /// FMA instruction, because Powerpc prefers FMADD. 1081 bool isProfitableToHoist(Instruction *I) const override; 1082 1083 const MCPhysReg *getScratchRegisters(CallingConv::ID CC) const override; 1084 1085 // Should we expand the build vector with shuffles? 1086 bool 1087 shouldExpandBuildVectorWithShuffles(EVT VT, 1088 unsigned DefinedValues) const override; 1089 1090 // Keep the zero-extensions for arguments to libcalls. 1091 bool shouldKeepZExtForFP16Conv() const override { return true; } 1092 1093 /// createFastISel - This method returns a target-specific FastISel object, 1094 /// or null if the target does not support "fast" instruction selection. 1095 FastISel *createFastISel(FunctionLoweringInfo &FuncInfo, 1096 const TargetLibraryInfo *LibInfo) const override; 1097 1098 /// Returns true if an argument of type Ty needs to be passed in a 1099 /// contiguous block of registers in calling convention CallConv. 1100 bool functionArgumentNeedsConsecutiveRegisters( 1101 Type *Ty, CallingConv::ID CallConv, bool isVarArg, 1102 const DataLayout &DL) const override { 1103 // We support any array type as "consecutive" block in the parameter 1104 // save area. The element type defines the alignment requirement and 1105 // whether the argument should go in GPRs, FPRs, or VRs if available. 1106 // 1107 // Note that clang uses this capability both to implement the ELFv2 1108 // homogeneous float/vector aggregate ABI, and to avoid having to use 1109 // "byval" when passing aggregates that might fully fit in registers. 1110 return Ty->isArrayTy(); 1111 } 1112 1113 /// If a physical register, this returns the register that receives the 1114 /// exception address on entry to an EH pad. 1115 Register 1116 getExceptionPointerRegister(const Constant *PersonalityFn) const override; 1117 1118 /// If a physical register, this returns the register that receives the 1119 /// exception typeid on entry to a landing pad. 1120 Register 1121 getExceptionSelectorRegister(const Constant *PersonalityFn) const override; 1122 1123 /// Override to support customized stack guard loading. 1124 bool useLoadStackGuardNode() const override; 1125 void insertSSPDeclarations(Module &M) const override; 1126 Value *getSDagStackGuard(const Module &M) const override; 1127 1128 bool isFPImmLegal(const APFloat &Imm, EVT VT, 1129 bool ForCodeSize) const override; 1130 1131 unsigned getJumpTableEncoding() const override; 1132 bool isJumpTableRelative() const override; 1133 SDValue getPICJumpTableRelocBase(SDValue Table, 1134 SelectionDAG &DAG) const override; 1135 const MCExpr *getPICJumpTableRelocBaseExpr(const MachineFunction *MF, 1136 unsigned JTI, 1137 MCContext &Ctx) const override; 1138 1139 /// SelectOptimalAddrMode - Based on a node N and it's Parent (a MemSDNode), 1140 /// compute the address flags of the node, get the optimal address mode 1141 /// based on the flags, and set the Base and Disp based on the address mode. 1142 PPC::AddrMode SelectOptimalAddrMode(const SDNode *Parent, SDValue N, 1143 SDValue &Disp, SDValue &Base, 1144 SelectionDAG &DAG, 1145 MaybeAlign Align) const; 1146 /// SelectForceXFormMode - Given the specified address, force it to be 1147 /// represented as an indexed [r+r] operation (an XForm instruction). 1148 PPC::AddrMode SelectForceXFormMode(SDValue N, SDValue &Disp, SDValue &Base, 1149 SelectionDAG &DAG) const; 1150 1151 bool splitValueIntoRegisterParts( 1152 SelectionDAG & DAG, const SDLoc &DL, SDValue Val, SDValue *Parts, 1153 unsigned NumParts, MVT PartVT, std::optional<CallingConv::ID> CC) 1154 const override; 1155 /// Structure that collects some common arguments that get passed around 1156 /// between the functions for call lowering. 1157 struct CallFlags { 1158 const CallingConv::ID CallConv; 1159 const bool IsTailCall : 1; 1160 const bool IsVarArg : 1; 1161 const bool IsPatchPoint : 1; 1162 const bool IsIndirect : 1; 1163 const bool HasNest : 1; 1164 const bool NoMerge : 1; 1165 1166 CallFlags(CallingConv::ID CC, bool IsTailCall, bool IsVarArg, 1167 bool IsPatchPoint, bool IsIndirect, bool HasNest, bool NoMerge) 1168 : CallConv(CC), IsTailCall(IsTailCall), IsVarArg(IsVarArg), 1169 IsPatchPoint(IsPatchPoint), IsIndirect(IsIndirect), 1170 HasNest(HasNest), NoMerge(NoMerge) {} 1171 }; 1172 1173 CCAssignFn *ccAssignFnForCall(CallingConv::ID CC, bool Return, 1174 bool IsVarArg) const; 1175 1176 private: 1177 struct ReuseLoadInfo { 1178 SDValue Ptr; 1179 SDValue Chain; 1180 SDValue ResChain; 1181 MachinePointerInfo MPI; 1182 bool IsDereferenceable = false; 1183 bool IsInvariant = false; 1184 Align Alignment; 1185 AAMDNodes AAInfo; 1186 const MDNode *Ranges = nullptr; 1187 1188 ReuseLoadInfo() = default; 1189 1190 MachineMemOperand::Flags MMOFlags() const { 1191 MachineMemOperand::Flags F = MachineMemOperand::MONone; 1192 if (IsDereferenceable) 1193 F |= MachineMemOperand::MODereferenceable; 1194 if (IsInvariant) 1195 F |= MachineMemOperand::MOInvariant; 1196 return F; 1197 } 1198 }; 1199 1200 // Map that relates a set of common address flags to PPC addressing modes. 1201 std::map<PPC::AddrMode, SmallVector<unsigned, 16>> AddrModesMap; 1202 void initializeAddrModeMap(); 1203 1204 bool canReuseLoadAddress(SDValue Op, EVT MemVT, ReuseLoadInfo &RLI, 1205 SelectionDAG &DAG, 1206 ISD::LoadExtType ET = ISD::NON_EXTLOAD) const; 1207 void spliceIntoChain(SDValue ResChain, SDValue NewResChain, 1208 SelectionDAG &DAG) const; 1209 1210 void LowerFP_TO_INTForReuse(SDValue Op, ReuseLoadInfo &RLI, 1211 SelectionDAG &DAG, const SDLoc &dl) const; 1212 SDValue LowerFP_TO_INTDirectMove(SDValue Op, SelectionDAG &DAG, 1213 const SDLoc &dl) const; 1214 1215 bool directMoveIsProfitable(const SDValue &Op) const; 1216 SDValue LowerINT_TO_FPDirectMove(SDValue Op, SelectionDAG &DAG, 1217 const SDLoc &dl) const; 1218 1219 SDValue LowerINT_TO_FPVector(SDValue Op, SelectionDAG &DAG, 1220 const SDLoc &dl) const; 1221 1222 SDValue LowerTRUNCATEVector(SDValue Op, SelectionDAG &DAG) const; 1223 1224 SDValue getFramePointerFrameIndex(SelectionDAG & DAG) const; 1225 SDValue getReturnAddrFrameIndex(SelectionDAG & DAG) const; 1226 1227 bool 1228 IsEligibleForTailCallOptimization(SDValue Callee, 1229 CallingConv::ID CalleeCC, 1230 bool isVarArg, 1231 const SmallVectorImpl<ISD::InputArg> &Ins, 1232 SelectionDAG& DAG) const; 1233 1234 bool IsEligibleForTailCallOptimization_64SVR4( 1235 SDValue Callee, CallingConv::ID CalleeCC, const CallBase *CB, 1236 bool isVarArg, const SmallVectorImpl<ISD::OutputArg> &Outs, 1237 const SmallVectorImpl<ISD::InputArg> &Ins, SelectionDAG &DAG) const; 1238 1239 SDValue EmitTailCallLoadFPAndRetAddr(SelectionDAG &DAG, int SPDiff, 1240 SDValue Chain, SDValue &LROpOut, 1241 SDValue &FPOpOut, 1242 const SDLoc &dl) const; 1243 1244 SDValue getTOCEntry(SelectionDAG &DAG, const SDLoc &dl, SDValue GA) const; 1245 1246 SDValue LowerRETURNADDR(SDValue Op, SelectionDAG &DAG) const; 1247 SDValue LowerFRAMEADDR(SDValue Op, SelectionDAG &DAG) const; 1248 SDValue LowerConstantPool(SDValue Op, SelectionDAG &DAG) const; 1249 SDValue LowerBlockAddress(SDValue Op, SelectionDAG &DAG) const; 1250 SDValue LowerGlobalTLSAddress(SDValue Op, SelectionDAG &DAG) const; 1251 SDValue LowerGlobalTLSAddressAIX(SDValue Op, SelectionDAG &DAG) const; 1252 SDValue LowerGlobalTLSAddressLinux(SDValue Op, SelectionDAG &DAG) const; 1253 SDValue LowerGlobalAddress(SDValue Op, SelectionDAG &DAG) const; 1254 SDValue LowerJumpTable(SDValue Op, SelectionDAG &DAG) const; 1255 SDValue LowerSETCC(SDValue Op, SelectionDAG &DAG) const; 1256 SDValue LowerINIT_TRAMPOLINE(SDValue Op, SelectionDAG &DAG) const; 1257 SDValue LowerADJUST_TRAMPOLINE(SDValue Op, SelectionDAG &DAG) const; 1258 SDValue LowerINLINEASM(SDValue Op, SelectionDAG &DAG) const; 1259 SDValue LowerVASTART(SDValue Op, SelectionDAG &DAG) const; 1260 SDValue LowerVAARG(SDValue Op, SelectionDAG &DAG) const; 1261 SDValue LowerVACOPY(SDValue Op, SelectionDAG &DAG) const; 1262 SDValue LowerSTACKRESTORE(SDValue Op, SelectionDAG &DAG) const; 1263 SDValue LowerGET_DYNAMIC_AREA_OFFSET(SDValue Op, SelectionDAG &DAG) const; 1264 SDValue LowerDYNAMIC_STACKALLOC(SDValue Op, SelectionDAG &DAG) const; 1265 SDValue LowerEH_DWARF_CFA(SDValue Op, SelectionDAG &DAG) const; 1266 SDValue LowerLOAD(SDValue Op, SelectionDAG &DAG) const; 1267 SDValue LowerSTORE(SDValue Op, SelectionDAG &DAG) const; 1268 SDValue LowerTRUNCATE(SDValue Op, SelectionDAG &DAG) const; 1269 SDValue LowerSELECT_CC(SDValue Op, SelectionDAG &DAG) const; 1270 SDValue LowerFP_TO_INT(SDValue Op, SelectionDAG &DAG, 1271 const SDLoc &dl) const; 1272 SDValue LowerINT_TO_FP(SDValue Op, SelectionDAG &DAG) const; 1273 SDValue LowerGET_ROUNDING(SDValue Op, SelectionDAG &DAG) const; 1274 SDValue LowerSHL_PARTS(SDValue Op, SelectionDAG &DAG) const; 1275 SDValue LowerSRL_PARTS(SDValue Op, SelectionDAG &DAG) const; 1276 SDValue LowerSRA_PARTS(SDValue Op, SelectionDAG &DAG) const; 1277 SDValue LowerFunnelShift(SDValue Op, SelectionDAG &DAG) const; 1278 SDValue LowerBUILD_VECTOR(SDValue Op, SelectionDAG &DAG) const; 1279 SDValue LowerVECTOR_SHUFFLE(SDValue Op, SelectionDAG &DAG) const; 1280 SDValue LowerVPERM(SDValue Op, SelectionDAG &DAG, ArrayRef<int> PermMask, 1281 EVT VT, SDValue V1, SDValue V2) const; 1282 SDValue LowerINSERT_VECTOR_ELT(SDValue Op, SelectionDAG &DAG) const; 1283 SDValue LowerINTRINSIC_WO_CHAIN(SDValue Op, SelectionDAG &DAG) const; 1284 SDValue LowerINTRINSIC_VOID(SDValue Op, SelectionDAG &DAG) const; 1285 SDValue LowerBSWAP(SDValue Op, SelectionDAG &DAG) const; 1286 SDValue LowerATOMIC_CMP_SWAP(SDValue Op, SelectionDAG &DAG) const; 1287 SDValue lowerToLibCall(const char *LibCallName, SDValue Op, 1288 SelectionDAG &DAG) const; 1289 SDValue lowerLibCallBasedOnType(const char *LibCallFloatName, 1290 const char *LibCallDoubleName, SDValue Op, 1291 SelectionDAG &DAG) const; 1292 bool isLowringToMASSFiniteSafe(SDValue Op) const; 1293 bool isLowringToMASSSafe(SDValue Op) const; 1294 bool isScalarMASSConversionEnabled() const; 1295 SDValue lowerLibCallBase(const char *LibCallDoubleName, 1296 const char *LibCallFloatName, 1297 const char *LibCallDoubleNameFinite, 1298 const char *LibCallFloatNameFinite, SDValue Op, 1299 SelectionDAG &DAG) const; 1300 SDValue lowerPow(SDValue Op, SelectionDAG &DAG) const; 1301 SDValue lowerSin(SDValue Op, SelectionDAG &DAG) const; 1302 SDValue lowerCos(SDValue Op, SelectionDAG &DAG) const; 1303 SDValue lowerLog(SDValue Op, SelectionDAG &DAG) const; 1304 SDValue lowerLog10(SDValue Op, SelectionDAG &DAG) const; 1305 SDValue lowerExp(SDValue Op, SelectionDAG &DAG) const; 1306 SDValue LowerATOMIC_LOAD_STORE(SDValue Op, SelectionDAG &DAG) const; 1307 SDValue LowerSCALAR_TO_VECTOR(SDValue Op, SelectionDAG &DAG) const; 1308 SDValue LowerMUL(SDValue Op, SelectionDAG &DAG) const; 1309 SDValue LowerFP_EXTEND(SDValue Op, SelectionDAG &DAG) const; 1310 SDValue LowerFP_ROUND(SDValue Op, SelectionDAG &DAG) const; 1311 SDValue LowerROTL(SDValue Op, SelectionDAG &DAG) const; 1312 1313 SDValue LowerVectorLoad(SDValue Op, SelectionDAG &DAG) const; 1314 SDValue LowerVectorStore(SDValue Op, SelectionDAG &DAG) const; 1315 1316 SDValue LowerCallResult(SDValue Chain, SDValue InFlag, 1317 CallingConv::ID CallConv, bool isVarArg, 1318 const SmallVectorImpl<ISD::InputArg> &Ins, 1319 const SDLoc &dl, SelectionDAG &DAG, 1320 SmallVectorImpl<SDValue> &InVals) const; 1321 1322 SDValue FinishCall(CallFlags CFlags, const SDLoc &dl, SelectionDAG &DAG, 1323 SmallVector<std::pair<unsigned, SDValue>, 8> &RegsToPass, 1324 SDValue InFlag, SDValue Chain, SDValue CallSeqStart, 1325 SDValue &Callee, int SPDiff, unsigned NumBytes, 1326 const SmallVectorImpl<ISD::InputArg> &Ins, 1327 SmallVectorImpl<SDValue> &InVals, 1328 const CallBase *CB) const; 1329 1330 SDValue 1331 LowerFormalArguments(SDValue Chain, CallingConv::ID CallConv, bool isVarArg, 1332 const SmallVectorImpl<ISD::InputArg> &Ins, 1333 const SDLoc &dl, SelectionDAG &DAG, 1334 SmallVectorImpl<SDValue> &InVals) const override; 1335 1336 SDValue LowerCall(TargetLowering::CallLoweringInfo &CLI, 1337 SmallVectorImpl<SDValue> &InVals) const override; 1338 1339 bool CanLowerReturn(CallingConv::ID CallConv, MachineFunction &MF, 1340 bool isVarArg, 1341 const SmallVectorImpl<ISD::OutputArg> &Outs, 1342 LLVMContext &Context) const override; 1343 1344 SDValue LowerReturn(SDValue Chain, CallingConv::ID CallConv, bool isVarArg, 1345 const SmallVectorImpl<ISD::OutputArg> &Outs, 1346 const SmallVectorImpl<SDValue> &OutVals, 1347 const SDLoc &dl, SelectionDAG &DAG) const override; 1348 1349 SDValue extendArgForPPC64(ISD::ArgFlagsTy Flags, EVT ObjectVT, 1350 SelectionDAG &DAG, SDValue ArgVal, 1351 const SDLoc &dl) const; 1352 1353 SDValue LowerFormalArguments_AIX( 1354 SDValue Chain, CallingConv::ID CallConv, bool isVarArg, 1355 const SmallVectorImpl<ISD::InputArg> &Ins, const SDLoc &dl, 1356 SelectionDAG &DAG, SmallVectorImpl<SDValue> &InVals) const; 1357 SDValue LowerFormalArguments_64SVR4( 1358 SDValue Chain, CallingConv::ID CallConv, bool isVarArg, 1359 const SmallVectorImpl<ISD::InputArg> &Ins, const SDLoc &dl, 1360 SelectionDAG &DAG, SmallVectorImpl<SDValue> &InVals) const; 1361 SDValue LowerFormalArguments_32SVR4( 1362 SDValue Chain, CallingConv::ID CallConv, bool isVarArg, 1363 const SmallVectorImpl<ISD::InputArg> &Ins, const SDLoc &dl, 1364 SelectionDAG &DAG, SmallVectorImpl<SDValue> &InVals) const; 1365 1366 SDValue createMemcpyOutsideCallSeq(SDValue Arg, SDValue PtrOff, 1367 SDValue CallSeqStart, 1368 ISD::ArgFlagsTy Flags, SelectionDAG &DAG, 1369 const SDLoc &dl) const; 1370 1371 SDValue LowerCall_64SVR4(SDValue Chain, SDValue Callee, CallFlags CFlags, 1372 const SmallVectorImpl<ISD::OutputArg> &Outs, 1373 const SmallVectorImpl<SDValue> &OutVals, 1374 const SmallVectorImpl<ISD::InputArg> &Ins, 1375 const SDLoc &dl, SelectionDAG &DAG, 1376 SmallVectorImpl<SDValue> &InVals, 1377 const CallBase *CB) const; 1378 SDValue LowerCall_32SVR4(SDValue Chain, SDValue Callee, CallFlags CFlags, 1379 const SmallVectorImpl<ISD::OutputArg> &Outs, 1380 const SmallVectorImpl<SDValue> &OutVals, 1381 const SmallVectorImpl<ISD::InputArg> &Ins, 1382 const SDLoc &dl, SelectionDAG &DAG, 1383 SmallVectorImpl<SDValue> &InVals, 1384 const CallBase *CB) const; 1385 SDValue LowerCall_AIX(SDValue Chain, SDValue Callee, CallFlags CFlags, 1386 const SmallVectorImpl<ISD::OutputArg> &Outs, 1387 const SmallVectorImpl<SDValue> &OutVals, 1388 const SmallVectorImpl<ISD::InputArg> &Ins, 1389 const SDLoc &dl, SelectionDAG &DAG, 1390 SmallVectorImpl<SDValue> &InVals, 1391 const CallBase *CB) const; 1392 1393 SDValue lowerEH_SJLJ_SETJMP(SDValue Op, SelectionDAG &DAG) const; 1394 SDValue lowerEH_SJLJ_LONGJMP(SDValue Op, SelectionDAG &DAG) const; 1395 SDValue LowerBITCAST(SDValue Op, SelectionDAG &DAG) const; 1396 1397 SDValue DAGCombineExtBoolTrunc(SDNode *N, DAGCombinerInfo &DCI) const; 1398 SDValue DAGCombineBuildVector(SDNode *N, DAGCombinerInfo &DCI) const; 1399 SDValue DAGCombineTruncBoolExt(SDNode *N, DAGCombinerInfo &DCI) const; 1400 SDValue combineStoreFPToInt(SDNode *N, DAGCombinerInfo &DCI) const; 1401 SDValue combineFPToIntToFP(SDNode *N, DAGCombinerInfo &DCI) const; 1402 SDValue combineSHL(SDNode *N, DAGCombinerInfo &DCI) const; 1403 SDValue combineSRA(SDNode *N, DAGCombinerInfo &DCI) const; 1404 SDValue combineSRL(SDNode *N, DAGCombinerInfo &DCI) const; 1405 SDValue combineMUL(SDNode *N, DAGCombinerInfo &DCI) const; 1406 SDValue combineADD(SDNode *N, DAGCombinerInfo &DCI) const; 1407 SDValue combineFMALike(SDNode *N, DAGCombinerInfo &DCI) const; 1408 SDValue combineTRUNCATE(SDNode *N, DAGCombinerInfo &DCI) const; 1409 SDValue combineSetCC(SDNode *N, DAGCombinerInfo &DCI) const; 1410 SDValue combineVSelect(SDNode *N, DAGCombinerInfo &DCI) const; 1411 SDValue combineVectorShuffle(ShuffleVectorSDNode *SVN, 1412 SelectionDAG &DAG) const; 1413 SDValue combineVReverseMemOP(ShuffleVectorSDNode *SVN, LSBaseSDNode *LSBase, 1414 DAGCombinerInfo &DCI) const; 1415 1416 /// ConvertSETCCToSubtract - looks at SETCC that compares ints. It replaces 1417 /// SETCC with integer subtraction when (1) there is a legal way of doing it 1418 /// (2) keeping the result of comparison in GPR has performance benefit. 1419 SDValue ConvertSETCCToSubtract(SDNode *N, DAGCombinerInfo &DCI) const; 1420 1421 SDValue getSqrtEstimate(SDValue Operand, SelectionDAG &DAG, int Enabled, 1422 int &RefinementSteps, bool &UseOneConstNR, 1423 bool Reciprocal) const override; 1424 SDValue getRecipEstimate(SDValue Operand, SelectionDAG &DAG, int Enabled, 1425 int &RefinementSteps) const override; 1426 SDValue getSqrtInputTest(SDValue Operand, SelectionDAG &DAG, 1427 const DenormalMode &Mode) const override; 1428 SDValue getSqrtResultForDenormInput(SDValue Operand, 1429 SelectionDAG &DAG) const override; 1430 unsigned combineRepeatedFPDivisors() const override; 1431 1432 SDValue 1433 combineElementTruncationToVectorTruncation(SDNode *N, 1434 DAGCombinerInfo &DCI) const; 1435 1436 /// lowerToVINSERTH - Return the SDValue if this VECTOR_SHUFFLE can be 1437 /// handled by the VINSERTH instruction introduced in ISA 3.0. This is 1438 /// essentially any shuffle of v8i16 vectors that just inserts one element 1439 /// from one vector into the other. 1440 SDValue lowerToVINSERTH(ShuffleVectorSDNode *N, SelectionDAG &DAG) const; 1441 1442 /// lowerToVINSERTB - Return the SDValue if this VECTOR_SHUFFLE can be 1443 /// handled by the VINSERTB instruction introduced in ISA 3.0. This is 1444 /// essentially v16i8 vector version of VINSERTH. 1445 SDValue lowerToVINSERTB(ShuffleVectorSDNode *N, SelectionDAG &DAG) const; 1446 1447 /// lowerToXXSPLTI32DX - Return the SDValue if this VECTOR_SHUFFLE can be 1448 /// handled by the XXSPLTI32DX instruction introduced in ISA 3.1. 1449 SDValue lowerToXXSPLTI32DX(ShuffleVectorSDNode *N, SelectionDAG &DAG) const; 1450 1451 // Return whether the call instruction can potentially be optimized to a 1452 // tail call. This will cause the optimizers to attempt to move, or 1453 // duplicate return instructions to help enable tail call optimizations. 1454 bool mayBeEmittedAsTailCall(const CallInst *CI) const override; 1455 bool hasBitPreservingFPLogic(EVT VT) const override; 1456 bool isMaskAndCmp0FoldingBeneficial(const Instruction &AndI) const override; 1457 1458 /// getAddrModeForFlags - Based on the set of address flags, select the most 1459 /// optimal instruction format to match by. 1460 PPC::AddrMode getAddrModeForFlags(unsigned Flags) const; 1461 1462 /// computeMOFlags - Given a node N and it's Parent (a MemSDNode), compute 1463 /// the address flags of the load/store instruction that is to be matched. 1464 /// The address flags are stored in a map, which is then searched 1465 /// through to determine the optimal load/store instruction format. 1466 unsigned computeMOFlags(const SDNode *Parent, SDValue N, 1467 SelectionDAG &DAG) const; 1468 }; // end class PPCTargetLowering 1469 1470 namespace PPC { 1471 1472 FastISel *createFastISel(FunctionLoweringInfo &FuncInfo, 1473 const TargetLibraryInfo *LibInfo); 1474 1475 } // end namespace PPC 1476 1477 bool isIntS16Immediate(SDNode *N, int16_t &Imm); 1478 bool isIntS16Immediate(SDValue Op, int16_t &Imm); 1479 bool isIntS34Immediate(SDNode *N, int64_t &Imm); 1480 bool isIntS34Immediate(SDValue Op, int64_t &Imm); 1481 1482 bool convertToNonDenormSingle(APInt &ArgAPInt); 1483 bool convertToNonDenormSingle(APFloat &ArgAPFloat); 1484 bool checkConvertToNonDenormSingle(APFloat &ArgAPFloat); 1485 1486 } // end namespace llvm 1487 1488 #endif // LLVM_LIB_TARGET_POWERPC_PPCISELLOWERING_H 1489