1 //===----------------------------------------------------------------------===// 2 // 3 // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. 4 // See https://llvm.org/LICENSE.txt for license information. 5 // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception 6 // 7 //===----------------------------------------------------------------------===// 8 9 // Copyright (c) Microsoft Corporation. 10 // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception 11 12 // Copyright 2018 Ulf Adams 13 // Copyright (c) Microsoft Corporation. All rights reserved. 14 15 // Boost Software License - Version 1.0 - August 17th, 2003 16 17 // Permission is hereby granted, free of charge, to any person or organization 18 // obtaining a copy of the software and accompanying documentation covered by 19 // this license (the "Software") to use, reproduce, display, distribute, 20 // execute, and transmit the Software, and to prepare derivative works of the 21 // Software, and to permit third-parties to whom the Software is furnished to 22 // do so, all subject to the following: 23 24 // The copyright notices in the Software and this entire statement, including 25 // the above license grant, this restriction and the following disclaimer, 26 // must be included in all copies of the Software, in whole or in part, and 27 // all derivative works of the Software, unless such copies or derivative 28 // works are solely in the form of machine-executable object code generated by 29 // a source language processor. 30 31 // THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 32 // IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 33 // FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT 34 // SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE 35 // FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, 36 // ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER 37 // DEALINGS IN THE SOFTWARE. 38 39 // Avoid formatting to keep the changes with the original code minimal. 40 // clang-format off 41 42 #include <__assert> 43 #include <__config> 44 #include <charconv> 45 #include <cstdint> 46 #include <cstddef> 47 48 #include "include/ryu/common.h" 49 #include "include/ryu/d2fixed.h" 50 #include "include/ryu/d2s_intrinsics.h" 51 #include "include/ryu/digit_table.h" 52 #include "include/ryu/f2s.h" 53 #include "include/ryu/ryu.h" 54 55 _LIBCPP_BEGIN_NAMESPACE_STD 56 57 inline constexpr int __FLOAT_MANTISSA_BITS = 23; 58 inline constexpr int __FLOAT_EXPONENT_BITS = 8; 59 inline constexpr int __FLOAT_BIAS = 127; 60 61 inline constexpr int __FLOAT_POW5_INV_BITCOUNT = 59; 62 inline constexpr uint64_t __FLOAT_POW5_INV_SPLIT[31] = { 63 576460752303423489u, 461168601842738791u, 368934881474191033u, 295147905179352826u, 64 472236648286964522u, 377789318629571618u, 302231454903657294u, 483570327845851670u, 65 386856262276681336u, 309485009821345069u, 495176015714152110u, 396140812571321688u, 66 316912650057057351u, 507060240091291761u, 405648192073033409u, 324518553658426727u, 67 519229685853482763u, 415383748682786211u, 332306998946228969u, 531691198313966350u, 68 425352958651173080u, 340282366920938464u, 544451787073501542u, 435561429658801234u, 69 348449143727040987u, 557518629963265579u, 446014903970612463u, 356811923176489971u, 70 570899077082383953u, 456719261665907162u, 365375409332725730u 71 }; 72 inline constexpr int __FLOAT_POW5_BITCOUNT = 61; 73 inline constexpr uint64_t __FLOAT_POW5_SPLIT[47] = { 74 1152921504606846976u, 1441151880758558720u, 1801439850948198400u, 2251799813685248000u, 75 1407374883553280000u, 1759218604441600000u, 2199023255552000000u, 1374389534720000000u, 76 1717986918400000000u, 2147483648000000000u, 1342177280000000000u, 1677721600000000000u, 77 2097152000000000000u, 1310720000000000000u, 1638400000000000000u, 2048000000000000000u, 78 1280000000000000000u, 1600000000000000000u, 2000000000000000000u, 1250000000000000000u, 79 1562500000000000000u, 1953125000000000000u, 1220703125000000000u, 1525878906250000000u, 80 1907348632812500000u, 1192092895507812500u, 1490116119384765625u, 1862645149230957031u, 81 1164153218269348144u, 1455191522836685180u, 1818989403545856475u, 2273736754432320594u, 82 1421085471520200371u, 1776356839400250464u, 2220446049250313080u, 1387778780781445675u, 83 1734723475976807094u, 2168404344971008868u, 1355252715606880542u, 1694065894508600678u, 84 2117582368135750847u, 1323488980084844279u, 1654361225106055349u, 2067951531382569187u, 85 1292469707114105741u, 1615587133892632177u, 2019483917365790221u 86 }; 87 88 [[nodiscard]] _LIBCPP_HIDE_FROM_ABI inline uint32_t __pow5Factor(uint32_t __value) { 89 uint32_t __count = 0; 90 for (;;) { 91 _LIBCPP_ASSERT_INTERNAL(__value != 0, ""); 92 const uint32_t __q = __value / 5; 93 const uint32_t __r = __value % 5; 94 if (__r != 0) { 95 break; 96 } 97 __value = __q; 98 ++__count; 99 } 100 return __count; 101 } 102 103 // Returns true if __value is divisible by 5^__p. 104 [[nodiscard]] _LIBCPP_HIDE_FROM_ABI inline bool __multipleOfPowerOf5(const uint32_t __value, const uint32_t __p) { 105 return __pow5Factor(__value) >= __p; 106 } 107 108 // Returns true if __value is divisible by 2^__p. 109 [[nodiscard]] _LIBCPP_HIDE_FROM_ABI inline bool __multipleOfPowerOf2(const uint32_t __value, const uint32_t __p) { 110 _LIBCPP_ASSERT_INTERNAL(__value != 0, ""); 111 _LIBCPP_ASSERT_INTERNAL(__p < 32, ""); 112 // __builtin_ctz doesn't appear to be faster here. 113 return (__value & ((1u << __p) - 1)) == 0; 114 } 115 116 [[nodiscard]] _LIBCPP_HIDE_FROM_ABI inline uint32_t __mulShift(const uint32_t __m, const uint64_t __factor, const int32_t __shift) { 117 _LIBCPP_ASSERT_INTERNAL(__shift > 32, ""); 118 119 // The casts here help MSVC to avoid calls to the __allmul library 120 // function. 121 const uint32_t __factorLo = static_cast<uint32_t>(__factor); 122 const uint32_t __factorHi = static_cast<uint32_t>(__factor >> 32); 123 const uint64_t __bits0 = static_cast<uint64_t>(__m) * __factorLo; 124 const uint64_t __bits1 = static_cast<uint64_t>(__m) * __factorHi; 125 126 #ifndef _LIBCPP_64_BIT 127 // On 32-bit platforms we can avoid a 64-bit shift-right since we only 128 // need the upper 32 bits of the result and the shift value is > 32. 129 const uint32_t __bits0Hi = static_cast<uint32_t>(__bits0 >> 32); 130 uint32_t __bits1Lo = static_cast<uint32_t>(__bits1); 131 uint32_t __bits1Hi = static_cast<uint32_t>(__bits1 >> 32); 132 __bits1Lo += __bits0Hi; 133 __bits1Hi += (__bits1Lo < __bits0Hi); 134 const int32_t __s = __shift - 32; 135 return (__bits1Hi << (32 - __s)) | (__bits1Lo >> __s); 136 #else // ^^^ 32-bit ^^^ / vvv 64-bit vvv 137 const uint64_t __sum = (__bits0 >> 32) + __bits1; 138 const uint64_t __shiftedSum = __sum >> (__shift - 32); 139 _LIBCPP_ASSERT_INTERNAL(__shiftedSum <= UINT32_MAX, ""); 140 return static_cast<uint32_t>(__shiftedSum); 141 #endif // ^^^ 64-bit ^^^ 142 } 143 144 [[nodiscard]] _LIBCPP_HIDE_FROM_ABI inline uint32_t __mulPow5InvDivPow2(const uint32_t __m, const uint32_t __q, const int32_t __j) { 145 return __mulShift(__m, __FLOAT_POW5_INV_SPLIT[__q], __j); 146 } 147 148 [[nodiscard]] _LIBCPP_HIDE_FROM_ABI inline uint32_t __mulPow5divPow2(const uint32_t __m, const uint32_t __i, const int32_t __j) { 149 return __mulShift(__m, __FLOAT_POW5_SPLIT[__i], __j); 150 } 151 152 // A floating decimal representing m * 10^e. 153 struct __floating_decimal_32 { 154 uint32_t __mantissa; 155 int32_t __exponent; 156 }; 157 158 [[nodiscard]] _LIBCPP_HIDE_FROM_ABI inline __floating_decimal_32 __f2d(const uint32_t __ieeeMantissa, const uint32_t __ieeeExponent) { 159 int32_t __e2; 160 uint32_t __m2; 161 if (__ieeeExponent == 0) { 162 // We subtract 2 so that the bounds computation has 2 additional bits. 163 __e2 = 1 - __FLOAT_BIAS - __FLOAT_MANTISSA_BITS - 2; 164 __m2 = __ieeeMantissa; 165 } else { 166 __e2 = static_cast<int32_t>(__ieeeExponent) - __FLOAT_BIAS - __FLOAT_MANTISSA_BITS - 2; 167 __m2 = (1u << __FLOAT_MANTISSA_BITS) | __ieeeMantissa; 168 } 169 const bool __even = (__m2 & 1) == 0; 170 const bool __acceptBounds = __even; 171 172 // Step 2: Determine the interval of valid decimal representations. 173 const uint32_t __mv = 4 * __m2; 174 const uint32_t __mp = 4 * __m2 + 2; 175 // Implicit bool -> int conversion. True is 1, false is 0. 176 const uint32_t __mmShift = __ieeeMantissa != 0 || __ieeeExponent <= 1; 177 const uint32_t __mm = 4 * __m2 - 1 - __mmShift; 178 179 // Step 3: Convert to a decimal power base using 64-bit arithmetic. 180 uint32_t __vr, __vp, __vm; 181 int32_t __e10; 182 bool __vmIsTrailingZeros = false; 183 bool __vrIsTrailingZeros = false; 184 uint8_t __lastRemovedDigit = 0; 185 if (__e2 >= 0) { 186 const uint32_t __q = __log10Pow2(__e2); 187 __e10 = static_cast<int32_t>(__q); 188 const int32_t __k = __FLOAT_POW5_INV_BITCOUNT + __pow5bits(static_cast<int32_t>(__q)) - 1; 189 const int32_t __i = -__e2 + static_cast<int32_t>(__q) + __k; 190 __vr = __mulPow5InvDivPow2(__mv, __q, __i); 191 __vp = __mulPow5InvDivPow2(__mp, __q, __i); 192 __vm = __mulPow5InvDivPow2(__mm, __q, __i); 193 if (__q != 0 && (__vp - 1) / 10 <= __vm / 10) { 194 // We need to know one removed digit even if we are not going to loop below. We could use 195 // __q = X - 1 above, except that would require 33 bits for the result, and we've found that 196 // 32-bit arithmetic is faster even on 64-bit machines. 197 const int32_t __l = __FLOAT_POW5_INV_BITCOUNT + __pow5bits(static_cast<int32_t>(__q - 1)) - 1; 198 __lastRemovedDigit = static_cast<uint8_t>(__mulPow5InvDivPow2(__mv, __q - 1, 199 -__e2 + static_cast<int32_t>(__q) - 1 + __l) % 10); 200 } 201 if (__q <= 9) { 202 // The largest power of 5 that fits in 24 bits is 5^10, but __q <= 9 seems to be safe as well. 203 // Only one of __mp, __mv, and __mm can be a multiple of 5, if any. 204 if (__mv % 5 == 0) { 205 __vrIsTrailingZeros = __multipleOfPowerOf5(__mv, __q); 206 } else if (__acceptBounds) { 207 __vmIsTrailingZeros = __multipleOfPowerOf5(__mm, __q); 208 } else { 209 __vp -= __multipleOfPowerOf5(__mp, __q); 210 } 211 } 212 } else { 213 const uint32_t __q = __log10Pow5(-__e2); 214 __e10 = static_cast<int32_t>(__q) + __e2; 215 const int32_t __i = -__e2 - static_cast<int32_t>(__q); 216 const int32_t __k = __pow5bits(__i) - __FLOAT_POW5_BITCOUNT; 217 int32_t __j = static_cast<int32_t>(__q) - __k; 218 __vr = __mulPow5divPow2(__mv, static_cast<uint32_t>(__i), __j); 219 __vp = __mulPow5divPow2(__mp, static_cast<uint32_t>(__i), __j); 220 __vm = __mulPow5divPow2(__mm, static_cast<uint32_t>(__i), __j); 221 if (__q != 0 && (__vp - 1) / 10 <= __vm / 10) { 222 __j = static_cast<int32_t>(__q) - 1 - (__pow5bits(__i + 1) - __FLOAT_POW5_BITCOUNT); 223 __lastRemovedDigit = static_cast<uint8_t>(__mulPow5divPow2(__mv, static_cast<uint32_t>(__i + 1), __j) % 10); 224 } 225 if (__q <= 1) { 226 // {__vr,__vp,__vm} is trailing zeros if {__mv,__mp,__mm} has at least __q trailing 0 bits. 227 // __mv = 4 * __m2, so it always has at least two trailing 0 bits. 228 __vrIsTrailingZeros = true; 229 if (__acceptBounds) { 230 // __mm = __mv - 1 - __mmShift, so it has 1 trailing 0 bit iff __mmShift == 1. 231 __vmIsTrailingZeros = __mmShift == 1; 232 } else { 233 // __mp = __mv + 2, so it always has at least one trailing 0 bit. 234 --__vp; 235 } 236 } else if (__q < 31) { // TRANSITION(ulfjack): Use a tighter bound here. 237 __vrIsTrailingZeros = __multipleOfPowerOf2(__mv, __q - 1); 238 } 239 } 240 241 // Step 4: Find the shortest decimal representation in the interval of valid representations. 242 int32_t __removed = 0; 243 uint32_t _Output; 244 if (__vmIsTrailingZeros || __vrIsTrailingZeros) { 245 // General case, which happens rarely (~4.0%). 246 while (__vp / 10 > __vm / 10) { 247 #ifdef __clang__ // TRANSITION, LLVM-23106 248 __vmIsTrailingZeros &= __vm - (__vm / 10) * 10 == 0; 249 #else 250 __vmIsTrailingZeros &= __vm % 10 == 0; 251 #endif 252 __vrIsTrailingZeros &= __lastRemovedDigit == 0; 253 __lastRemovedDigit = static_cast<uint8_t>(__vr % 10); 254 __vr /= 10; 255 __vp /= 10; 256 __vm /= 10; 257 ++__removed; 258 } 259 if (__vmIsTrailingZeros) { 260 while (__vm % 10 == 0) { 261 __vrIsTrailingZeros &= __lastRemovedDigit == 0; 262 __lastRemovedDigit = static_cast<uint8_t>(__vr % 10); 263 __vr /= 10; 264 __vp /= 10; 265 __vm /= 10; 266 ++__removed; 267 } 268 } 269 if (__vrIsTrailingZeros && __lastRemovedDigit == 5 && __vr % 2 == 0) { 270 // Round even if the exact number is .....50..0. 271 __lastRemovedDigit = 4; 272 } 273 // We need to take __vr + 1 if __vr is outside bounds or we need to round up. 274 _Output = __vr + ((__vr == __vm && (!__acceptBounds || !__vmIsTrailingZeros)) || __lastRemovedDigit >= 5); 275 } else { 276 // Specialized for the common case (~96.0%). Percentages below are relative to this. 277 // Loop iterations below (approximately): 278 // 0: 13.6%, 1: 70.7%, 2: 14.1%, 3: 1.39%, 4: 0.14%, 5+: 0.01% 279 while (__vp / 10 > __vm / 10) { 280 __lastRemovedDigit = static_cast<uint8_t>(__vr % 10); 281 __vr /= 10; 282 __vp /= 10; 283 __vm /= 10; 284 ++__removed; 285 } 286 // We need to take __vr + 1 if __vr is outside bounds or we need to round up. 287 _Output = __vr + (__vr == __vm || __lastRemovedDigit >= 5); 288 } 289 const int32_t __exp = __e10 + __removed; 290 291 __floating_decimal_32 __fd; 292 __fd.__exponent = __exp; 293 __fd.__mantissa = _Output; 294 return __fd; 295 } 296 297 [[nodiscard]] _LIBCPP_HIDE_FROM_ABI inline to_chars_result _Large_integer_to_chars(char* const _First, char* const _Last, 298 const uint32_t _Mantissa2, const int32_t _Exponent2) { 299 300 // Print the integer _Mantissa2 * 2^_Exponent2 exactly. 301 302 // For nonzero integers, _Exponent2 >= -23. (The minimum value occurs when _Mantissa2 * 2^_Exponent2 is 1. 303 // In that case, _Mantissa2 is the implicit 1 bit followed by 23 zeros, so _Exponent2 is -23 to shift away 304 // the zeros.) The dense range of exactly representable integers has negative or zero exponents 305 // (as positive exponents make the range non-dense). For that dense range, Ryu will always be used: 306 // every digit is necessary to uniquely identify the value, so Ryu must print them all. 307 308 // Positive exponents are the non-dense range of exactly representable integers. 309 // This contains all of the values for which Ryu can't be used (and a few Ryu-friendly values). 310 311 // Performance note: Long division appears to be faster than losslessly widening float to double and calling 312 // __d2fixed_buffered_n(). If __f2fixed_buffered_n() is implemented, it might be faster than long division. 313 314 _LIBCPP_ASSERT_INTERNAL(_Exponent2 > 0, ""); 315 _LIBCPP_ASSERT_INTERNAL(_Exponent2 <= 104, ""); // because __ieeeExponent <= 254 316 317 // Manually represent _Mantissa2 * 2^_Exponent2 as a large integer. _Mantissa2 is always 24 bits 318 // (due to the implicit bit), while _Exponent2 indicates a shift of at most 104 bits. 319 // 24 + 104 equals 128 equals 4 * 32, so we need exactly 4 32-bit elements. 320 // We use a little-endian representation, visualized like this: 321 322 // << left shift << 323 // most significant 324 // _Data[3] _Data[2] _Data[1] _Data[0] 325 // least significant 326 // >> right shift >> 327 328 constexpr uint32_t _Data_size = 4; 329 uint32_t _Data[_Data_size]{}; 330 331 // _Maxidx is the index of the most significant nonzero element. 332 uint32_t _Maxidx = ((24 + static_cast<uint32_t>(_Exponent2) + 31) / 32) - 1; 333 _LIBCPP_ASSERT_INTERNAL(_Maxidx < _Data_size, ""); 334 335 const uint32_t _Bit_shift = static_cast<uint32_t>(_Exponent2) % 32; 336 if (_Bit_shift <= 8) { // _Mantissa2's 24 bits don't cross an element boundary 337 _Data[_Maxidx] = _Mantissa2 << _Bit_shift; 338 } else { // _Mantissa2's 24 bits cross an element boundary 339 _Data[_Maxidx - 1] = _Mantissa2 << _Bit_shift; 340 _Data[_Maxidx] = _Mantissa2 >> (32 - _Bit_shift); 341 } 342 343 // If Ryu hasn't determined the total output length, we need to buffer the digits generated from right to left 344 // by long division. The largest possible float is: 340'282346638'528859811'704183484'516925440 345 uint32_t _Blocks[4]; 346 int32_t _Filled_blocks = 0; 347 // From left to right, we're going to print: 348 // _Data[0] will be [1, 10] digits. 349 // Then if _Filled_blocks > 0: 350 // _Blocks[_Filled_blocks - 1], ..., _Blocks[0] will be 0-filled 9-digit blocks. 351 352 if (_Maxidx != 0) { // If the integer is actually large, perform long division. 353 // Otherwise, skip to printing _Data[0]. 354 for (;;) { 355 // Loop invariant: _Maxidx != 0 (i.e. the integer is actually large) 356 357 const uint32_t _Most_significant_elem = _Data[_Maxidx]; 358 const uint32_t _Initial_remainder = _Most_significant_elem % 1000000000; 359 const uint32_t _Initial_quotient = _Most_significant_elem / 1000000000; 360 _Data[_Maxidx] = _Initial_quotient; 361 uint64_t _Remainder = _Initial_remainder; 362 363 // Process less significant elements. 364 uint32_t _Idx = _Maxidx; 365 do { 366 --_Idx; // Initially, _Remainder is at most 10^9 - 1. 367 368 // Now, _Remainder is at most (10^9 - 1) * 2^32 + 2^32 - 1, simplified to 10^9 * 2^32 - 1. 369 _Remainder = (_Remainder << 32) | _Data[_Idx]; 370 371 // floor((10^9 * 2^32 - 1) / 10^9) == 2^32 - 1, so uint32_t _Quotient is lossless. 372 const uint32_t _Quotient = static_cast<uint32_t>(__div1e9(_Remainder)); 373 374 // _Remainder is at most 10^9 - 1 again. 375 // For uint32_t truncation, see the __mod1e9() comment in d2s_intrinsics.h. 376 _Remainder = static_cast<uint32_t>(_Remainder) - 1000000000u * _Quotient; 377 378 _Data[_Idx] = _Quotient; 379 } while (_Idx != 0); 380 381 // Store a 0-filled 9-digit block. 382 _Blocks[_Filled_blocks++] = static_cast<uint32_t>(_Remainder); 383 384 if (_Initial_quotient == 0) { // Is the large integer shrinking? 385 --_Maxidx; // log2(10^9) is 29.9, so we can't shrink by more than one element. 386 if (_Maxidx == 0) { 387 break; // We've finished long division. Now we need to print _Data[0]. 388 } 389 } 390 } 391 } 392 393 _LIBCPP_ASSERT_INTERNAL(_Data[0] != 0, ""); 394 for (uint32_t _Idx = 1; _Idx < _Data_size; ++_Idx) { 395 _LIBCPP_ASSERT_INTERNAL(_Data[_Idx] == 0, ""); 396 } 397 398 const uint32_t _Data_olength = _Data[0] >= 1000000000 ? 10 : __decimalLength9(_Data[0]); 399 const uint32_t _Total_fixed_length = _Data_olength + 9 * _Filled_blocks; 400 401 if (_Last - _First < static_cast<ptrdiff_t>(_Total_fixed_length)) { 402 return { _Last, errc::value_too_large }; 403 } 404 405 char* _Result = _First; 406 407 // Print _Data[0]. While it's up to 10 digits, 408 // which is more than Ryu generates, the code below can handle this. 409 __append_n_digits(_Data_olength, _Data[0], _Result); 410 _Result += _Data_olength; 411 412 // Print 0-filled 9-digit blocks. 413 for (int32_t _Idx = _Filled_blocks - 1; _Idx >= 0; --_Idx) { 414 __append_nine_digits(_Blocks[_Idx], _Result); 415 _Result += 9; 416 } 417 418 return { _Result, errc{} }; 419 } 420 421 [[nodiscard]] _LIBCPP_HIDE_FROM_ABI inline to_chars_result __to_chars(char* const _First, char* const _Last, const __floating_decimal_32 __v, 422 chars_format _Fmt, const uint32_t __ieeeMantissa, const uint32_t __ieeeExponent) { 423 // Step 5: Print the decimal representation. 424 uint32_t _Output = __v.__mantissa; 425 int32_t _Ryu_exponent = __v.__exponent; 426 const uint32_t __olength = __decimalLength9(_Output); 427 int32_t _Scientific_exponent = _Ryu_exponent + static_cast<int32_t>(__olength) - 1; 428 429 if (_Fmt == chars_format{}) { 430 int32_t _Lower; 431 int32_t _Upper; 432 433 if (__olength == 1) { 434 // Value | Fixed | Scientific 435 // 1e-3 | "0.001" | "1e-03" 436 // 1e4 | "10000" | "1e+04" 437 _Lower = -3; 438 _Upper = 4; 439 } else { 440 // Value | Fixed | Scientific 441 // 1234e-7 | "0.0001234" | "1.234e-04" 442 // 1234e5 | "123400000" | "1.234e+08" 443 _Lower = -static_cast<int32_t>(__olength + 3); 444 _Upper = 5; 445 } 446 447 if (_Lower <= _Ryu_exponent && _Ryu_exponent <= _Upper) { 448 _Fmt = chars_format::fixed; 449 } else { 450 _Fmt = chars_format::scientific; 451 } 452 } else if (_Fmt == chars_format::general) { 453 // C11 7.21.6.1 "The fprintf function"/8: 454 // "Let P equal [...] 6 if the precision is omitted [...]. 455 // Then, if a conversion with style E would have an exponent of X: 456 // - if P > X >= -4, the conversion is with style f [...]. 457 // - otherwise, the conversion is with style e [...]." 458 if (-4 <= _Scientific_exponent && _Scientific_exponent < 6) { 459 _Fmt = chars_format::fixed; 460 } else { 461 _Fmt = chars_format::scientific; 462 } 463 } 464 465 if (_Fmt == chars_format::fixed) { 466 // Example: _Output == 1729, __olength == 4 467 468 // _Ryu_exponent | Printed | _Whole_digits | _Total_fixed_length | Notes 469 // --------------|----------|---------------|----------------------|--------------------------------------- 470 // 2 | 172900 | 6 | _Whole_digits | Ryu can't be used for printing 471 // 1 | 17290 | 5 | (sometimes adjusted) | when the trimmed digits are nonzero. 472 // --------------|----------|---------------|----------------------|--------------------------------------- 473 // 0 | 1729 | 4 | _Whole_digits | Unified length cases. 474 // --------------|----------|---------------|----------------------|--------------------------------------- 475 // -1 | 172.9 | 3 | __olength + 1 | This case can't happen for 476 // -2 | 17.29 | 2 | | __olength == 1, but no additional 477 // -3 | 1.729 | 1 | | code is needed to avoid it. 478 // --------------|----------|---------------|----------------------|--------------------------------------- 479 // -4 | 0.1729 | 0 | 2 - _Ryu_exponent | C11 7.21.6.1 "The fprintf function"/8: 480 // -5 | 0.01729 | -1 | | "If a decimal-point character appears, 481 // -6 | 0.001729 | -2 | | at least one digit appears before it." 482 483 const int32_t _Whole_digits = static_cast<int32_t>(__olength) + _Ryu_exponent; 484 485 uint32_t _Total_fixed_length; 486 if (_Ryu_exponent >= 0) { // cases "172900" and "1729" 487 _Total_fixed_length = static_cast<uint32_t>(_Whole_digits); 488 if (_Output == 1) { 489 // Rounding can affect the number of digits. 490 // For example, 1e11f is exactly "99999997952" which is 11 digits instead of 12. 491 // We can use a lookup table to detect this and adjust the total length. 492 static constexpr uint8_t _Adjustment[39] = { 493 0,0,0,0,0,0,0,0,0,0,0,1,1,1,0,1,0,1,1,1,0,0,1,1,0,1,0,1,1,0,0,1,0,1,1,0,1,1,1 }; 494 _Total_fixed_length -= _Adjustment[_Ryu_exponent]; 495 // _Whole_digits doesn't need to be adjusted because these cases won't refer to it later. 496 } 497 } else if (_Whole_digits > 0) { // case "17.29" 498 _Total_fixed_length = __olength + 1; 499 } else { // case "0.001729" 500 _Total_fixed_length = static_cast<uint32_t>(2 - _Ryu_exponent); 501 } 502 503 if (_Last - _First < static_cast<ptrdiff_t>(_Total_fixed_length)) { 504 return { _Last, errc::value_too_large }; 505 } 506 507 char* _Mid; 508 if (_Ryu_exponent > 0) { // case "172900" 509 bool _Can_use_ryu; 510 511 if (_Ryu_exponent > 10) { // 10^10 is the largest power of 10 that's exactly representable as a float. 512 _Can_use_ryu = false; 513 } else { 514 // Ryu generated X: __v.__mantissa * 10^_Ryu_exponent 515 // __v.__mantissa == 2^_Trailing_zero_bits * (__v.__mantissa >> _Trailing_zero_bits) 516 // 10^_Ryu_exponent == 2^_Ryu_exponent * 5^_Ryu_exponent 517 518 // _Trailing_zero_bits is [0, 29] (aside: because 2^29 is the largest power of 2 519 // with 9 decimal digits, which is float's round-trip limit.) 520 // _Ryu_exponent is [1, 10]. 521 // Normalization adds [2, 23] (aside: at least 2 because the pre-normalized mantissa is at least 5). 522 // This adds up to [3, 62], which is well below float's maximum binary exponent 127. 523 524 // Therefore, we just need to consider (__v.__mantissa >> _Trailing_zero_bits) * 5^_Ryu_exponent. 525 526 // If that product would exceed 24 bits, then X can't be exactly represented as a float. 527 // (That's not a problem for round-tripping, because X is close enough to the original float, 528 // but X isn't mathematically equal to the original float.) This requires a high-precision fallback. 529 530 // If the product is 24 bits or smaller, then X can be exactly represented as a float (and we don't 531 // need to re-synthesize it; the original float must have been X, because Ryu wouldn't produce the 532 // same output for two different floats X and Y). This allows Ryu's output to be used (zero-filled). 533 534 // (2^24 - 1) / 5^0 (for indexing), (2^24 - 1) / 5^1, ..., (2^24 - 1) / 5^10 535 static constexpr uint32_t _Max_shifted_mantissa[11] = { 536 16777215, 3355443, 671088, 134217, 26843, 5368, 1073, 214, 42, 8, 1 }; 537 538 unsigned long _Trailing_zero_bits; 539 (void) _BitScanForward(&_Trailing_zero_bits, __v.__mantissa); // __v.__mantissa is guaranteed nonzero 540 const uint32_t _Shifted_mantissa = __v.__mantissa >> _Trailing_zero_bits; 541 _Can_use_ryu = _Shifted_mantissa <= _Max_shifted_mantissa[_Ryu_exponent]; 542 } 543 544 if (!_Can_use_ryu) { 545 const uint32_t _Mantissa2 = __ieeeMantissa | (1u << __FLOAT_MANTISSA_BITS); // restore implicit bit 546 const int32_t _Exponent2 = static_cast<int32_t>(__ieeeExponent) 547 - __FLOAT_BIAS - __FLOAT_MANTISSA_BITS; // bias and normalization 548 549 // Performance note: We've already called Ryu, so this will redundantly perform buffering and bounds checking. 550 return _Large_integer_to_chars(_First, _Last, _Mantissa2, _Exponent2); 551 } 552 553 // _Can_use_ryu 554 // Print the decimal digits, left-aligned within [_First, _First + _Total_fixed_length). 555 _Mid = _First + __olength; 556 } else { // cases "1729", "17.29", and "0.001729" 557 // Print the decimal digits, right-aligned within [_First, _First + _Total_fixed_length). 558 _Mid = _First + _Total_fixed_length; 559 } 560 561 while (_Output >= 10000) { 562 #ifdef __clang__ // TRANSITION, LLVM-38217 563 const uint32_t __c = _Output - 10000 * (_Output / 10000); 564 #else 565 const uint32_t __c = _Output % 10000; 566 #endif 567 _Output /= 10000; 568 const uint32_t __c0 = (__c % 100) << 1; 569 const uint32_t __c1 = (__c / 100) << 1; 570 std::memcpy(_Mid -= 2, __DIGIT_TABLE + __c0, 2); 571 std::memcpy(_Mid -= 2, __DIGIT_TABLE + __c1, 2); 572 } 573 if (_Output >= 100) { 574 const uint32_t __c = (_Output % 100) << 1; 575 _Output /= 100; 576 std::memcpy(_Mid -= 2, __DIGIT_TABLE + __c, 2); 577 } 578 if (_Output >= 10) { 579 const uint32_t __c = _Output << 1; 580 std::memcpy(_Mid -= 2, __DIGIT_TABLE + __c, 2); 581 } else { 582 *--_Mid = static_cast<char>('0' + _Output); 583 } 584 585 if (_Ryu_exponent > 0) { // case "172900" with _Can_use_ryu 586 // Performance note: it might be more efficient to do this immediately after setting _Mid. 587 std::memset(_First + __olength, '0', static_cast<size_t>(_Ryu_exponent)); 588 } else if (_Ryu_exponent == 0) { // case "1729" 589 // Done! 590 } else if (_Whole_digits > 0) { // case "17.29" 591 // Performance note: moving digits might not be optimal. 592 std::memmove(_First, _First + 1, static_cast<size_t>(_Whole_digits)); 593 _First[_Whole_digits] = '.'; 594 } else { // case "0.001729" 595 // Performance note: a larger memset() followed by overwriting '.' might be more efficient. 596 _First[0] = '0'; 597 _First[1] = '.'; 598 std::memset(_First + 2, '0', static_cast<size_t>(-_Whole_digits)); 599 } 600 601 return { _First + _Total_fixed_length, errc{} }; 602 } 603 604 const uint32_t _Total_scientific_length = 605 __olength + (__olength > 1) + 4; // digits + possible decimal point + scientific exponent 606 if (_Last - _First < static_cast<ptrdiff_t>(_Total_scientific_length)) { 607 return { _Last, errc::value_too_large }; 608 } 609 char* const __result = _First; 610 611 // Print the decimal digits. 612 uint32_t __i = 0; 613 while (_Output >= 10000) { 614 #ifdef __clang__ // TRANSITION, LLVM-38217 615 const uint32_t __c = _Output - 10000 * (_Output / 10000); 616 #else 617 const uint32_t __c = _Output % 10000; 618 #endif 619 _Output /= 10000; 620 const uint32_t __c0 = (__c % 100) << 1; 621 const uint32_t __c1 = (__c / 100) << 1; 622 std::memcpy(__result + __olength - __i - 1, __DIGIT_TABLE + __c0, 2); 623 std::memcpy(__result + __olength - __i - 3, __DIGIT_TABLE + __c1, 2); 624 __i += 4; 625 } 626 if (_Output >= 100) { 627 const uint32_t __c = (_Output % 100) << 1; 628 _Output /= 100; 629 std::memcpy(__result + __olength - __i - 1, __DIGIT_TABLE + __c, 2); 630 __i += 2; 631 } 632 if (_Output >= 10) { 633 const uint32_t __c = _Output << 1; 634 // We can't use memcpy here: the decimal dot goes between these two digits. 635 __result[2] = __DIGIT_TABLE[__c + 1]; 636 __result[0] = __DIGIT_TABLE[__c]; 637 } else { 638 __result[0] = static_cast<char>('0' + _Output); 639 } 640 641 // Print decimal point if needed. 642 uint32_t __index; 643 if (__olength > 1) { 644 __result[1] = '.'; 645 __index = __olength + 1; 646 } else { 647 __index = 1; 648 } 649 650 // Print the exponent. 651 __result[__index++] = 'e'; 652 if (_Scientific_exponent < 0) { 653 __result[__index++] = '-'; 654 _Scientific_exponent = -_Scientific_exponent; 655 } else { 656 __result[__index++] = '+'; 657 } 658 659 std::memcpy(__result + __index, __DIGIT_TABLE + 2 * _Scientific_exponent, 2); 660 __index += 2; 661 662 return { _First + _Total_scientific_length, errc{} }; 663 } 664 665 [[nodiscard]] to_chars_result __f2s_buffered_n(char* const _First, char* const _Last, const float __f, 666 const chars_format _Fmt) { 667 668 // Step 1: Decode the floating-point number, and unify normalized and subnormal cases. 669 const uint32_t __bits = __float_to_bits(__f); 670 671 // Case distinction; exit early for the easy cases. 672 if (__bits == 0) { 673 if (_Fmt == chars_format::scientific) { 674 if (_Last - _First < 5) { 675 return { _Last, errc::value_too_large }; 676 } 677 678 std::memcpy(_First, "0e+00", 5); 679 680 return { _First + 5, errc{} }; 681 } 682 683 // Print "0" for chars_format::fixed, chars_format::general, and chars_format{}. 684 if (_First == _Last) { 685 return { _Last, errc::value_too_large }; 686 } 687 688 *_First = '0'; 689 690 return { _First + 1, errc{} }; 691 } 692 693 // Decode __bits into mantissa and exponent. 694 const uint32_t __ieeeMantissa = __bits & ((1u << __FLOAT_MANTISSA_BITS) - 1); 695 const uint32_t __ieeeExponent = __bits >> __FLOAT_MANTISSA_BITS; 696 697 // When _Fmt == chars_format::fixed and the floating-point number is a large integer, 698 // it's faster to skip Ryu and immediately print the integer exactly. 699 if (_Fmt == chars_format::fixed) { 700 const uint32_t _Mantissa2 = __ieeeMantissa | (1u << __FLOAT_MANTISSA_BITS); // restore implicit bit 701 const int32_t _Exponent2 = static_cast<int32_t>(__ieeeExponent) 702 - __FLOAT_BIAS - __FLOAT_MANTISSA_BITS; // bias and normalization 703 704 // Normal values are equal to _Mantissa2 * 2^_Exponent2. 705 // (Subnormals are different, but they'll be rejected by the _Exponent2 test here, so they can be ignored.) 706 707 if (_Exponent2 > 0) { 708 return _Large_integer_to_chars(_First, _Last, _Mantissa2, _Exponent2); 709 } 710 } 711 712 const __floating_decimal_32 __v = __f2d(__ieeeMantissa, __ieeeExponent); 713 return __to_chars(_First, _Last, __v, _Fmt, __ieeeMantissa, __ieeeExponent); 714 } 715 716 _LIBCPP_END_NAMESPACE_STD 717 718 // clang-format on 719