1 /* -*- Mode: c; tab-width: 8; indent-tabs-mode: 1; c-basic-offset: 8; -*- */ 2 /* 3 * Copyright (c) 1993, 1994, 1995, 1996, 1997 4 * The Regents of the University of California. All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 3. All advertising materials mentioning features or use of this software 15 * must display the following acknowledgement: 16 * This product includes software developed by the Computer Systems 17 * Engineering Group at Lawrence Berkeley Laboratory. 18 * 4. Neither the name of the University nor of the Laboratory may be used 19 * to endorse or promote products derived from this software without 20 * specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 */ 34 35 /* 36 * Remote packet capture mechanisms and extensions from WinPcap: 37 * 38 * Copyright (c) 2002 - 2003 39 * NetGroup, Politecnico di Torino (Italy) 40 * All rights reserved. 41 * 42 * Redistribution and use in source and binary forms, with or without 43 * modification, are permitted provided that the following conditions 44 * are met: 45 * 46 * 1. Redistributions of source code must retain the above copyright 47 * notice, this list of conditions and the following disclaimer. 48 * 2. Redistributions in binary form must reproduce the above copyright 49 * notice, this list of conditions and the following disclaimer in the 50 * documentation and/or other materials provided with the distribution. 51 * 3. Neither the name of the Politecnico di Torino nor the names of its 52 * contributors may be used to endorse or promote products derived from 53 * this software without specific prior written permission. 54 * 55 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 56 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 57 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 58 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 59 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 60 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 61 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 62 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 63 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 64 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 65 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 66 * 67 */ 68 69 #ifndef lib_pcap_pcap_h 70 #define lib_pcap_pcap_h 71 72 #include <pcap/funcattrs.h> 73 74 #include <pcap/pcap-inttypes.h> 75 76 #if defined(_WIN32) 77 #include <winsock2.h> /* u_int, u_char etc. */ 78 #include <io.h> /* _get_osfhandle() */ 79 #elif defined(MSDOS) 80 #include <sys/types.h> /* u_int, u_char etc. */ 81 #include <sys/socket.h> 82 #else /* UN*X */ 83 #include <sys/types.h> /* u_int, u_char etc. */ 84 #include <sys/time.h> 85 #endif /* _WIN32/MSDOS/UN*X */ 86 87 #include <net/bpf.h> 88 89 #include <stdio.h> 90 91 #ifdef __cplusplus 92 extern "C" { 93 #endif 94 95 /* 96 * Version number of the current version of the pcap file format. 97 * 98 * NOTE: this is *NOT* the version number of the libpcap library. 99 * To fetch the version information for the version of libpcap 100 * you're using, use pcap_lib_version(). 101 */ 102 #define PCAP_VERSION_MAJOR 2 103 #define PCAP_VERSION_MINOR 4 104 105 #define PCAP_ERRBUF_SIZE 256 106 107 /* 108 * Compatibility for systems that have a bpf.h that 109 * predates the bpf typedefs for 64-bit support. 110 */ 111 #if BPF_RELEASE - 0 < 199406 112 typedef int bpf_int32; 113 typedef u_int bpf_u_int32; 114 #endif 115 116 typedef struct pcap pcap_t; 117 typedef struct pcap_dumper pcap_dumper_t; 118 typedef struct pcap_if pcap_if_t; 119 typedef struct pcap_addr pcap_addr_t; 120 121 /* 122 * The first record in the file contains saved values for some 123 * of the flags used in the printout phases of tcpdump. 124 * Many fields here are 32 bit ints so compilers won't insert unwanted 125 * padding; these files need to be interchangeable across architectures. 126 * 127 * Do not change the layout of this structure, in any way (this includes 128 * changes that only affect the length of fields in this structure). 129 * 130 * Also, do not change the interpretation of any of the members of this 131 * structure, in any way (this includes using values other than 132 * LINKTYPE_ values, as defined in "savefile.c", in the "linktype" 133 * field). 134 * 135 * Instead: 136 * 137 * introduce a new structure for the new format, if the layout 138 * of the structure changed; 139 * 140 * send mail to "tcpdump-workers@lists.tcpdump.org", requesting 141 * a new magic number for your new capture file format, and, when 142 * you get the new magic number, put it in "savefile.c"; 143 * 144 * use that magic number for save files with the changed file 145 * header; 146 * 147 * make the code in "savefile.c" capable of reading files with 148 * the old file header as well as files with the new file header 149 * (using the magic number to determine the header format). 150 * 151 * Then supply the changes by forking the branch at 152 * 153 * https://github.com/the-tcpdump-group/libpcap/issues 154 * 155 * and issuing a pull request, so that future versions of libpcap and 156 * programs that use it (such as tcpdump) will be able to read your new 157 * capture file format. 158 */ 159 struct pcap_file_header { 160 bpf_u_int32 magic; 161 u_short version_major; 162 u_short version_minor; 163 bpf_int32 thiszone; /* gmt to local correction */ 164 bpf_u_int32 sigfigs; /* accuracy of timestamps */ 165 bpf_u_int32 snaplen; /* max length saved portion of each pkt */ 166 bpf_u_int32 linktype; /* data link type (LINKTYPE_*) */ 167 }; 168 169 /* 170 * Macros for the value returned by pcap_datalink_ext(). 171 * 172 * If LT_FCS_LENGTH_PRESENT(x) is true, the LT_FCS_LENGTH(x) macro 173 * gives the FCS length of packets in the capture. 174 */ 175 #define LT_FCS_LENGTH_PRESENT(x) ((x) & 0x04000000) 176 #define LT_FCS_LENGTH(x) (((x) & 0xF0000000) >> 28) 177 #define LT_FCS_DATALINK_EXT(x) ((((x) & 0xF) << 28) | 0x04000000) 178 179 typedef enum { 180 PCAP_D_INOUT = 0, 181 PCAP_D_IN, 182 PCAP_D_OUT 183 } pcap_direction_t; 184 185 /* 186 * Generic per-packet information, as supplied by libpcap. 187 * 188 * The time stamp can and should be a "struct timeval", regardless of 189 * whether your system supports 32-bit tv_sec in "struct timeval", 190 * 64-bit tv_sec in "struct timeval", or both if it supports both 32-bit 191 * and 64-bit applications. The on-disk format of savefiles uses 32-bit 192 * tv_sec (and tv_usec); this structure is irrelevant to that. 32-bit 193 * and 64-bit versions of libpcap, even if they're on the same platform, 194 * should supply the appropriate version of "struct timeval", even if 195 * that's not what the underlying packet capture mechanism supplies. 196 */ 197 struct pcap_pkthdr { 198 struct timeval ts; /* time stamp */ 199 bpf_u_int32 caplen; /* length of portion present */ 200 bpf_u_int32 len; /* length this packet (off wire) */ 201 }; 202 203 /* 204 * As returned by the pcap_stats() 205 */ 206 struct pcap_stat { 207 u_int ps_recv; /* number of packets received */ 208 u_int ps_drop; /* number of packets dropped */ 209 u_int ps_ifdrop; /* drops by interface -- only supported on some platforms */ 210 #ifdef _WIN32 211 u_int ps_capt; /* number of packets that reach the application */ 212 u_int ps_sent; /* number of packets sent by the server on the network */ 213 u_int ps_netdrop; /* number of packets lost on the network */ 214 #endif /* _WIN32 */ 215 }; 216 217 #ifdef MSDOS 218 /* 219 * As returned by the pcap_stats_ex() 220 */ 221 struct pcap_stat_ex { 222 u_long rx_packets; /* total packets received */ 223 u_long tx_packets; /* total packets transmitted */ 224 u_long rx_bytes; /* total bytes received */ 225 u_long tx_bytes; /* total bytes transmitted */ 226 u_long rx_errors; /* bad packets received */ 227 u_long tx_errors; /* packet transmit problems */ 228 u_long rx_dropped; /* no space in Rx buffers */ 229 u_long tx_dropped; /* no space available for Tx */ 230 u_long multicast; /* multicast packets received */ 231 u_long collisions; 232 233 /* detailed rx_errors: */ 234 u_long rx_length_errors; 235 u_long rx_over_errors; /* receiver ring buff overflow */ 236 u_long rx_crc_errors; /* recv'd pkt with crc error */ 237 u_long rx_frame_errors; /* recv'd frame alignment error */ 238 u_long rx_fifo_errors; /* recv'r fifo overrun */ 239 u_long rx_missed_errors; /* recv'r missed packet */ 240 241 /* detailed tx_errors */ 242 u_long tx_aborted_errors; 243 u_long tx_carrier_errors; 244 u_long tx_fifo_errors; 245 u_long tx_heartbeat_errors; 246 u_long tx_window_errors; 247 }; 248 #endif 249 250 /* 251 * Item in a list of interfaces. 252 */ 253 struct pcap_if { 254 struct pcap_if *next; 255 char *name; /* name to hand to "pcap_open_live()" */ 256 char *description; /* textual description of interface, or NULL */ 257 struct pcap_addr *addresses; 258 bpf_u_int32 flags; /* PCAP_IF_ interface flags */ 259 }; 260 261 #define PCAP_IF_LOOPBACK 0x00000001 /* interface is loopback */ 262 #define PCAP_IF_UP 0x00000002 /* interface is up */ 263 #define PCAP_IF_RUNNING 0x00000004 /* interface is running */ 264 #define PCAP_IF_WIRELESS 0x00000008 /* interface is wireless (*NOT* necessarily Wi-Fi!) */ 265 #define PCAP_IF_CONNECTION_STATUS 0x00000030 /* connection status: */ 266 #define PCAP_IF_CONNECTION_STATUS_UNKNOWN 0x00000000 /* unknown */ 267 #define PCAP_IF_CONNECTION_STATUS_CONNECTED 0x00000010 /* connected */ 268 #define PCAP_IF_CONNECTION_STATUS_DISCONNECTED 0x00000020 /* disconnected */ 269 #define PCAP_IF_CONNECTION_STATUS_NOT_APPLICABLE 0x00000030 /* not applicable */ 270 271 /* 272 * Representation of an interface address. 273 */ 274 struct pcap_addr { 275 struct pcap_addr *next; 276 struct sockaddr *addr; /* address */ 277 struct sockaddr *netmask; /* netmask for that address */ 278 struct sockaddr *broadaddr; /* broadcast address for that address */ 279 struct sockaddr *dstaddr; /* P2P destination address for that address */ 280 }; 281 282 typedef void (*pcap_handler)(u_char *, const struct pcap_pkthdr *, 283 const u_char *); 284 285 /* 286 * Error codes for the pcap API. 287 * These will all be negative, so you can check for the success or 288 * failure of a call that returns these codes by checking for a 289 * negative value. 290 */ 291 #define PCAP_ERROR -1 /* generic error code */ 292 #define PCAP_ERROR_BREAK -2 /* loop terminated by pcap_breakloop */ 293 #define PCAP_ERROR_NOT_ACTIVATED -3 /* the capture needs to be activated */ 294 #define PCAP_ERROR_ACTIVATED -4 /* the operation can't be performed on already activated captures */ 295 #define PCAP_ERROR_NO_SUCH_DEVICE -5 /* no such device exists */ 296 #define PCAP_ERROR_RFMON_NOTSUP -6 /* this device doesn't support rfmon (monitor) mode */ 297 #define PCAP_ERROR_NOT_RFMON -7 /* operation supported only in monitor mode */ 298 #define PCAP_ERROR_PERM_DENIED -8 /* no permission to open the device */ 299 #define PCAP_ERROR_IFACE_NOT_UP -9 /* interface isn't up */ 300 #define PCAP_ERROR_CANTSET_TSTAMP_TYPE -10 /* this device doesn't support setting the time stamp type */ 301 #define PCAP_ERROR_PROMISC_PERM_DENIED -11 /* you don't have permission to capture in promiscuous mode */ 302 #define PCAP_ERROR_TSTAMP_PRECISION_NOTSUP -12 /* the requested time stamp precision is not supported */ 303 304 /* 305 * Warning codes for the pcap API. 306 * These will all be positive and non-zero, so they won't look like 307 * errors. 308 */ 309 #define PCAP_WARNING 1 /* generic warning code */ 310 #define PCAP_WARNING_PROMISC_NOTSUP 2 /* this device doesn't support promiscuous mode */ 311 #define PCAP_WARNING_TSTAMP_TYPE_NOTSUP 3 /* the requested time stamp type is not supported */ 312 313 /* 314 * Value to pass to pcap_compile() as the netmask if you don't know what 315 * the netmask is. 316 */ 317 #define PCAP_NETMASK_UNKNOWN 0xffffffff 318 319 /* 320 * We're deprecating pcap_lookupdev() for various reasons (not 321 * thread-safe, can behave weirdly with WinPcap). Callers 322 * should use pcap_findalldevs() and use the first device. 323 */ 324 PCAP_API char *pcap_lookupdev(char *) 325 PCAP_DEPRECATED(pcap_lookupdev, "use 'pcap_findalldevs' and use the first device"); 326 327 PCAP_API int pcap_lookupnet(const char *, bpf_u_int32 *, bpf_u_int32 *, char *); 328 329 PCAP_API pcap_t *pcap_create(const char *, char *); 330 PCAP_API int pcap_set_snaplen(pcap_t *, int); 331 PCAP_API int pcap_set_promisc(pcap_t *, int); 332 PCAP_API int pcap_can_set_rfmon(pcap_t *); 333 PCAP_API int pcap_set_rfmon(pcap_t *, int); 334 PCAP_API int pcap_set_timeout(pcap_t *, int); 335 PCAP_API int pcap_set_tstamp_type(pcap_t *, int); 336 PCAP_API int pcap_set_immediate_mode(pcap_t *, int); 337 PCAP_API int pcap_set_buffer_size(pcap_t *, int); 338 PCAP_API int pcap_set_tstamp_precision(pcap_t *, int); 339 PCAP_API int pcap_get_tstamp_precision(pcap_t *); 340 PCAP_API int pcap_activate(pcap_t *); 341 342 PCAP_API int pcap_list_tstamp_types(pcap_t *, int **); 343 PCAP_API void pcap_free_tstamp_types(int *); 344 PCAP_API int pcap_tstamp_type_name_to_val(const char *); 345 PCAP_API const char *pcap_tstamp_type_val_to_name(int); 346 PCAP_API const char *pcap_tstamp_type_val_to_description(int); 347 348 #ifdef __linux__ 349 PCAP_API int pcap_set_protocol(pcap_t *, int); 350 #endif 351 352 /* 353 * Time stamp types. 354 * Not all systems and interfaces will necessarily support all of these. 355 * 356 * A system that supports PCAP_TSTAMP_HOST is offering time stamps 357 * provided by the host machine, rather than by the capture device, 358 * but not committing to any characteristics of the time stamp; 359 * it will not offer any of the PCAP_TSTAMP_HOST_ subtypes. 360 * 361 * PCAP_TSTAMP_HOST_LOWPREC is a time stamp, provided by the host machine, 362 * that's low-precision but relatively cheap to fetch; it's normally done 363 * using the system clock, so it's normally synchronized with times you'd 364 * fetch from system calls. 365 * 366 * PCAP_TSTAMP_HOST_HIPREC is a time stamp, provided by the host machine, 367 * that's high-precision; it might be more expensive to fetch. It might 368 * or might not be synchronized with the system clock, and might have 369 * problems with time stamps for packets received on different CPUs, 370 * depending on the platform. 371 * 372 * PCAP_TSTAMP_ADAPTER is a high-precision time stamp supplied by the 373 * capture device; it's synchronized with the system clock. 374 * 375 * PCAP_TSTAMP_ADAPTER_UNSYNCED is a high-precision time stamp supplied by 376 * the capture device; it's not synchronized with the system clock. 377 * 378 * Note that time stamps synchronized with the system clock can go 379 * backwards, as the system clock can go backwards. If a clock is 380 * not in sync with the system clock, that could be because the 381 * system clock isn't keeping accurate time, because the other 382 * clock isn't keeping accurate time, or both. 383 * 384 * Note that host-provided time stamps generally correspond to the 385 * time when the time-stamping code sees the packet; this could 386 * be some unknown amount of time after the first or last bit of 387 * the packet is received by the network adapter, due to batching 388 * of interrupts for packet arrival, queueing delays, etc.. 389 */ 390 #define PCAP_TSTAMP_HOST 0 /* host-provided, unknown characteristics */ 391 #define PCAP_TSTAMP_HOST_LOWPREC 1 /* host-provided, low precision */ 392 #define PCAP_TSTAMP_HOST_HIPREC 2 /* host-provided, high precision */ 393 #define PCAP_TSTAMP_ADAPTER 3 /* device-provided, synced with the system clock */ 394 #define PCAP_TSTAMP_ADAPTER_UNSYNCED 4 /* device-provided, not synced with the system clock */ 395 396 /* 397 * Time stamp resolution types. 398 * Not all systems and interfaces will necessarily support all of these 399 * resolutions when doing live captures; all of them can be requested 400 * when reading a savefile. 401 */ 402 #define PCAP_TSTAMP_PRECISION_MICRO 0 /* use timestamps with microsecond precision, default */ 403 #define PCAP_TSTAMP_PRECISION_NANO 1 /* use timestamps with nanosecond precision */ 404 405 PCAP_API pcap_t *pcap_open_live(const char *, int, int, int, char *); 406 PCAP_API pcap_t *pcap_open_dead(int, int); 407 PCAP_API pcap_t *pcap_open_dead_with_tstamp_precision(int, int, u_int); 408 PCAP_API pcap_t *pcap_open_offline_with_tstamp_precision(const char *, u_int, char *); 409 PCAP_API pcap_t *pcap_open_offline(const char *, char *); 410 #ifdef _WIN32 411 PCAP_API pcap_t *pcap_hopen_offline_with_tstamp_precision(intptr_t, u_int, char *); 412 PCAP_API pcap_t *pcap_hopen_offline(intptr_t, char *); 413 /* 414 * If we're building libpcap, these are internal routines in savefile.c, 415 * so we must not define them as macros. 416 * 417 * If we're not building libpcap, given that the version of the C runtime 418 * with which libpcap was built might be different from the version 419 * of the C runtime with which an application using libpcap was built, 420 * and that a FILE structure may differ between the two versions of the 421 * C runtime, calls to _fileno() must use the version of _fileno() in 422 * the C runtime used to open the FILE *, not the version in the C 423 * runtime with which libpcap was built. (Maybe once the Universal CRT 424 * rules the world, this will cease to be a problem.) 425 */ 426 #ifndef BUILDING_PCAP 427 #define pcap_fopen_offline_with_tstamp_precision(f,p,b) \ 428 pcap_hopen_offline_with_tstamp_precision(_get_osfhandle(_fileno(f)), p, b) 429 #define pcap_fopen_offline(f,b) \ 430 pcap_hopen_offline(_get_osfhandle(_fileno(f)), b) 431 #endif 432 #else /*_WIN32*/ 433 PCAP_API pcap_t *pcap_fopen_offline_with_tstamp_precision(FILE *, u_int, char *); 434 PCAP_API pcap_t *pcap_fopen_offline(FILE *, char *); 435 #endif /*_WIN32*/ 436 437 PCAP_API void pcap_close(pcap_t *); 438 PCAP_API int pcap_loop(pcap_t *, int, pcap_handler, u_char *); 439 PCAP_API int pcap_dispatch(pcap_t *, int, pcap_handler, u_char *); 440 PCAP_API const u_char *pcap_next(pcap_t *, struct pcap_pkthdr *); 441 PCAP_API int pcap_next_ex(pcap_t *, struct pcap_pkthdr **, const u_char **); 442 PCAP_API void pcap_breakloop(pcap_t *); 443 PCAP_API int pcap_stats(pcap_t *, struct pcap_stat *); 444 PCAP_API int pcap_setfilter(pcap_t *, struct bpf_program *); 445 PCAP_API int pcap_setdirection(pcap_t *, pcap_direction_t); 446 PCAP_API int pcap_getnonblock(pcap_t *, char *); 447 PCAP_API int pcap_setnonblock(pcap_t *, int, char *); 448 PCAP_API int pcap_inject(pcap_t *, const void *, size_t); 449 PCAP_API int pcap_sendpacket(pcap_t *, const u_char *, int); 450 PCAP_API const char *pcap_statustostr(int); 451 PCAP_API const char *pcap_strerror(int); 452 PCAP_API char *pcap_geterr(pcap_t *); 453 PCAP_API void pcap_perror(pcap_t *, const char *); 454 PCAP_API int pcap_compile(pcap_t *, struct bpf_program *, const char *, int, 455 bpf_u_int32); 456 PCAP_API int pcap_compile_nopcap(int, int, struct bpf_program *, 457 const char *, int, bpf_u_int32); 458 PCAP_API void pcap_freecode(struct bpf_program *); 459 PCAP_API int pcap_offline_filter(const struct bpf_program *, 460 const struct pcap_pkthdr *, const u_char *); 461 PCAP_API int pcap_datalink(pcap_t *); 462 PCAP_API int pcap_datalink_ext(pcap_t *); 463 PCAP_API int pcap_list_datalinks(pcap_t *, int **); 464 PCAP_API int pcap_set_datalink(pcap_t *, int); 465 PCAP_API void pcap_free_datalinks(int *); 466 PCAP_API int pcap_datalink_name_to_val(const char *); 467 PCAP_API const char *pcap_datalink_val_to_name(int); 468 PCAP_API const char *pcap_datalink_val_to_description(int); 469 PCAP_API int pcap_snapshot(pcap_t *); 470 PCAP_API int pcap_is_swapped(pcap_t *); 471 PCAP_API int pcap_major_version(pcap_t *); 472 PCAP_API int pcap_minor_version(pcap_t *); 473 PCAP_API int pcap_bufsize(pcap_t *); 474 475 /* XXX */ 476 PCAP_API FILE *pcap_file(pcap_t *); 477 PCAP_API int pcap_fileno(pcap_t *); 478 479 #ifdef _WIN32 480 PCAP_API int pcap_wsockinit(void); 481 #endif 482 483 PCAP_API pcap_dumper_t *pcap_dump_open(pcap_t *, const char *); 484 PCAP_API pcap_dumper_t *pcap_dump_fopen(pcap_t *, FILE *fp); 485 PCAP_API pcap_dumper_t *pcap_dump_open_append(pcap_t *, const char *); 486 PCAP_API FILE *pcap_dump_file(pcap_dumper_t *); 487 PCAP_API long pcap_dump_ftell(pcap_dumper_t *); 488 PCAP_API int64_t pcap_dump_ftell64(pcap_dumper_t *); 489 PCAP_API int pcap_dump_flush(pcap_dumper_t *); 490 PCAP_API void pcap_dump_close(pcap_dumper_t *); 491 PCAP_API void pcap_dump(u_char *, const struct pcap_pkthdr *, const u_char *); 492 493 PCAP_API int pcap_findalldevs(pcap_if_t **, char *); 494 PCAP_API void pcap_freealldevs(pcap_if_t *); 495 496 /* 497 * We return a pointer to the version string, rather than exporting the 498 * version string directly. 499 * 500 * On at least some UNIXes, if you import data from a shared library into 501 * an program, the data is bound into the program binary, so if the string 502 * in the version of the library with which the program was linked isn't 503 * the same as the string in the version of the library with which the 504 * program is being run, various undesirable things may happen (warnings, 505 * the string being the one from the version of the library with which the 506 * program was linked, or even weirder things, such as the string being the 507 * one from the library but being truncated). 508 * 509 * On Windows, the string is constructed at run time. 510 */ 511 PCAP_API const char *pcap_lib_version(void); 512 513 /* 514 * On at least some versions of NetBSD and QNX, we don't want to declare 515 * bpf_filter() here, as it's also be declared in <net/bpf.h>, with a 516 * different signature, but, on other BSD-flavored UN*Xes, it's not 517 * declared in <net/bpf.h>, so we *do* want to declare it here, so it's 518 * declared when we build pcap-bpf.c. 519 */ 520 #if !defined(__NetBSD__) && !defined(__QNX__) 521 PCAP_API u_int bpf_filter(const struct bpf_insn *, const u_char *, u_int, u_int); 522 #endif 523 PCAP_API int bpf_validate(const struct bpf_insn *f, int len); 524 PCAP_API char *bpf_image(const struct bpf_insn *, int); 525 PCAP_API void bpf_dump(const struct bpf_program *, int); 526 527 #if defined(_WIN32) 528 529 /* 530 * Win32 definitions 531 */ 532 533 /*! 534 \brief A queue of raw packets that will be sent to the network with pcap_sendqueue_transmit(). 535 */ 536 struct pcap_send_queue 537 { 538 u_int maxlen; /* Maximum size of the queue, in bytes. This 539 variable contains the size of the buffer field. */ 540 u_int len; /* Current size of the queue, in bytes. */ 541 char *buffer; /* Buffer containing the packets to be sent. */ 542 }; 543 544 typedef struct pcap_send_queue pcap_send_queue; 545 546 /*! 547 \brief This typedef is a support for the pcap_get_airpcap_handle() function 548 */ 549 #if !defined(AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_) 550 #define AIRPCAP_HANDLE__EAE405F5_0171_9592_B3C2_C19EC426AD34__DEFINED_ 551 typedef struct _AirpcapHandle *PAirpcapHandle; 552 #endif 553 554 PCAP_API int pcap_setbuff(pcap_t *p, int dim); 555 PCAP_API int pcap_setmode(pcap_t *p, int mode); 556 PCAP_API int pcap_setmintocopy(pcap_t *p, int size); 557 558 PCAP_API HANDLE pcap_getevent(pcap_t *p); 559 560 PCAP_API int pcap_oid_get_request(pcap_t *, bpf_u_int32, void *, size_t *); 561 PCAP_API int pcap_oid_set_request(pcap_t *, bpf_u_int32, const void *, size_t *); 562 563 PCAP_API pcap_send_queue* pcap_sendqueue_alloc(u_int memsize); 564 565 PCAP_API void pcap_sendqueue_destroy(pcap_send_queue* queue); 566 567 PCAP_API int pcap_sendqueue_queue(pcap_send_queue* queue, const struct pcap_pkthdr *pkt_header, const u_char *pkt_data); 568 569 PCAP_API u_int pcap_sendqueue_transmit(pcap_t *p, pcap_send_queue* queue, int sync); 570 571 PCAP_API struct pcap_stat *pcap_stats_ex(pcap_t *p, int *pcap_stat_size); 572 573 PCAP_API int pcap_setuserbuffer(pcap_t *p, int size); 574 575 PCAP_API int pcap_live_dump(pcap_t *p, char *filename, int maxsize, int maxpacks); 576 577 PCAP_API int pcap_live_dump_ended(pcap_t *p, int sync); 578 579 PCAP_API int pcap_start_oem(char* err_str, int flags); 580 581 PCAP_API PAirpcapHandle pcap_get_airpcap_handle(pcap_t *p); 582 583 #define MODE_CAPT 0 584 #define MODE_STAT 1 585 #define MODE_MON 2 586 587 #elif defined(MSDOS) 588 589 /* 590 * MS-DOS definitions 591 */ 592 593 PCAP_API int pcap_stats_ex (pcap_t *, struct pcap_stat_ex *); 594 PCAP_API void pcap_set_wait (pcap_t *p, void (*yield)(void), int wait); 595 PCAP_API u_long pcap_mac_packets (void); 596 597 #else /* UN*X */ 598 599 /* 600 * UN*X definitions 601 */ 602 603 PCAP_API int pcap_get_selectable_fd(pcap_t *); 604 PCAP_API struct timeval *pcap_get_required_select_timeout(pcap_t *); 605 606 #endif /* _WIN32/MSDOS/UN*X */ 607 608 #if 0 /* Remote capture is disabled on FreeBSD */ 609 /* 610 * Remote capture definitions. 611 * 612 * These routines are only present if libpcap has been configured to 613 * include remote capture support. 614 */ 615 616 /* 617 * The maximum buffer size in which address, port, interface names are kept. 618 * 619 * In case the adapter name or such is larger than this value, it is truncated. 620 * This is not used by the user; however it must be aware that an hostname / interface 621 * name longer than this value will be truncated. 622 */ 623 #define PCAP_BUF_SIZE 1024 624 625 /* 626 * The type of input source, passed to pcap_open(). 627 */ 628 #define PCAP_SRC_FILE 2 /* local savefile */ 629 #define PCAP_SRC_IFLOCAL 3 /* local network interface */ 630 #define PCAP_SRC_IFREMOTE 4 /* interface on a remote host, using RPCAP */ 631 632 /* 633 * The formats allowed by pcap_open() are the following: 634 * - file://path_and_filename [opens a local file] 635 * - rpcap://devicename [opens the selected device devices available on the local host, without using the RPCAP protocol] 636 * - rpcap://host/devicename [opens the selected device available on a remote host] 637 * - rpcap://host:port/devicename [opens the selected device available on a remote host, using a non-standard port for RPCAP] 638 * - adaptername [to open a local adapter; kept for compability, but it is strongly discouraged] 639 * - (NULL) [to open the first local adapter; kept for compability, but it is strongly discouraged] 640 * 641 * The formats allowed by the pcap_findalldevs_ex() are the following: 642 * - file://folder/ [lists all the files in the given folder] 643 * - rpcap:// [lists all local adapters] 644 * - rpcap://host:port/ [lists the devices available on a remote host] 645 * 646 * Referring to the 'host' and 'port' parameters, they can be either numeric or literal. Since 647 * IPv6 is fully supported, these are the allowed formats: 648 * 649 * - host (literal): e.g. host.foo.bar 650 * - host (numeric IPv4): e.g. 10.11.12.13 651 * - host (numeric IPv4, IPv6 style): e.g. [10.11.12.13] 652 * - host (numeric IPv6): e.g. [1:2:3::4] 653 * - port: can be either numeric (e.g. '80') or literal (e.g. 'http') 654 * 655 * Here you find some allowed examples: 656 * - rpcap://host.foo.bar/devicename [everything literal, no port number] 657 * - rpcap://host.foo.bar:1234/devicename [everything literal, with port number] 658 * - rpcap://10.11.12.13/devicename [IPv4 numeric, no port number] 659 * - rpcap://10.11.12.13:1234/devicename [IPv4 numeric, with port number] 660 * - rpcap://[10.11.12.13]:1234/devicename [IPv4 numeric with IPv6 format, with port number] 661 * - rpcap://[1:2:3::4]/devicename [IPv6 numeric, no port number] 662 * - rpcap://[1:2:3::4]:1234/devicename [IPv6 numeric, with port number] 663 * - rpcap://[1:2:3::4]:http/devicename [IPv6 numeric, with literal port number] 664 */ 665 666 /* 667 * URL schemes for capture source. 668 */ 669 /* 670 * This string indicates that the user wants to open a capture from a 671 * local file. 672 */ 673 #define PCAP_SRC_FILE_STRING "file://" 674 /* 675 * This string indicates that the user wants to open a capture from a 676 * network interface. This string does not necessarily involve the use 677 * of the RPCAP protocol. If the interface required resides on the local 678 * host, the RPCAP protocol is not involved and the local functions are used. 679 */ 680 #define PCAP_SRC_IF_STRING "rpcap://" 681 682 /* 683 * Flags to pass to pcap_open(). 684 */ 685 686 /* 687 * Specifies whether promiscuous mode is to be used. 688 */ 689 #define PCAP_OPENFLAG_PROMISCUOUS 0x00000001 690 691 /* 692 * Specifies, for an RPCAP capture, whether the data transfer (in 693 * case of a remote capture) has to be done with UDP protocol. 694 * 695 * If it is '1' if you want a UDP data connection, '0' if you want 696 * a TCP data connection; control connection is always TCP-based. 697 * A UDP connection is much lighter, but it does not guarantee that all 698 * the captured packets arrive to the client workstation. Moreover, 699 * it could be harmful in case of network congestion. 700 * This flag is meaningless if the source is not a remote interface. 701 * In that case, it is simply ignored. 702 */ 703 #define PCAP_OPENFLAG_DATATX_UDP 0x00000002 704 705 /* 706 * Specifies wheether the remote probe will capture its own generated 707 * traffic. 708 * 709 * In case the remote probe uses the same interface to capture traffic 710 * and to send data back to the caller, the captured traffic includes 711 * the RPCAP traffic as well. If this flag is turned on, the RPCAP 712 * traffic is excluded from the capture, so that the trace returned 713 * back to the collector is does not include this traffic. 714 * 715 * Has no effect on local interfaces or savefiles. 716 */ 717 #define PCAP_OPENFLAG_NOCAPTURE_RPCAP 0x00000004 718 719 /* 720 * Specifies whether the local adapter will capture its own generated traffic. 721 * 722 * This flag tells the underlying capture driver to drop the packets 723 * that were sent by itself. This is useful when building applications 724 * such as bridges that should ignore the traffic they just sent. 725 * 726 * Supported only on Windows. 727 */ 728 #define PCAP_OPENFLAG_NOCAPTURE_LOCAL 0x00000008 729 730 /* 731 * This flag configures the adapter for maximum responsiveness. 732 * 733 * In presence of a large value for nbytes, WinPcap waits for the arrival 734 * of several packets before copying the data to the user. This guarantees 735 * a low number of system calls, i.e. lower processor usage, i.e. better 736 * performance, which is good for applications like sniffers. If the user 737 * sets the PCAP_OPENFLAG_MAX_RESPONSIVENESS flag, the capture driver will 738 * copy the packets as soon as the application is ready to receive them. 739 * This is suggested for real time applications (such as, for example, 740 * a bridge) that need the best responsiveness. 741 * 742 * The equivalent with pcap_create()/pcap_activate() is "immediate mode". 743 */ 744 #define PCAP_OPENFLAG_MAX_RESPONSIVENESS 0x00000010 745 746 /* 747 * Remote authentication methods. 748 * These are used in the 'type' member of the pcap_rmtauth structure. 749 */ 750 751 /* 752 * NULL authentication. 753 * 754 * The 'NULL' authentication has to be equal to 'zero', so that old 755 * applications can just put every field of struct pcap_rmtauth to zero, 756 * and it does work. 757 */ 758 #define RPCAP_RMTAUTH_NULL 0 759 /* 760 * Username/password authentication. 761 * 762 * With this type of authentication, the RPCAP protocol will use the username/ 763 * password provided to authenticate the user on the remote machine. If the 764 * authentication is successful (and the user has the right to open network 765 * devices) the RPCAP connection will continue; otherwise it will be dropped. 766 * 767 * *******NOTE********: the username and password are sent over the network 768 * to the capture server *IN CLEAR TEXT*. Don't use this on a network 769 * that you don't completely control! (And be *really* careful in your 770 * definition of "completely"!) 771 */ 772 #define RPCAP_RMTAUTH_PWD 1 773 774 /* 775 * This structure keeps the information needed to autheticate the user 776 * on a remote machine. 777 * 778 * The remote machine can either grant or refuse the access according 779 * to the information provided. 780 * In case the NULL authentication is required, both 'username' and 781 * 'password' can be NULL pointers. 782 * 783 * This structure is meaningless if the source is not a remote interface; 784 * in that case, the functions which requires such a structure can accept 785 * a NULL pointer as well. 786 */ 787 struct pcap_rmtauth 788 { 789 /* 790 * \brief Type of the authentication required. 791 * 792 * In order to provide maximum flexibility, we can support different types 793 * of authentication based on the value of this 'type' variable. The currently 794 * supported authentication methods are defined into the 795 * \link remote_auth_methods Remote Authentication Methods Section\endlink. 796 */ 797 int type; 798 /* 799 * \brief Zero-terminated string containing the username that has to be 800 * used on the remote machine for authentication. 801 * 802 * This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication 803 * and it can be NULL. 804 */ 805 char *username; 806 /* 807 * \brief Zero-terminated string containing the password that has to be 808 * used on the remote machine for authentication. 809 * 810 * This field is meaningless in case of the RPCAP_RMTAUTH_NULL authentication 811 * and it can be NULL. 812 */ 813 char *password; 814 }; 815 816 /* 817 * This routine can open a savefile, a local device, or a device on 818 * a remote machine running an RPCAP server. 819 * 820 * For opening a savefile, the pcap_open_offline routines can be used, 821 * and will work just as well; code using them will work on more 822 * platforms than code using pcap_open() to open savefiles. 823 * 824 * For opening a local device, pcap_open_live() can be used; it supports 825 * most of the capabilities that pcap_open() supports, and code using it 826 * will work on more platforms than code using pcap_open(). pcap_create() 827 * and pcap_activate() can also be used; they support all capabilities 828 * that pcap_open() supports, except for the Windows-only 829 * PCAP_OPENFLAG_NOCAPTURE_LOCAL, and support additional capabilities. 830 * 831 * For opening a remote capture, pcap_open() is currently the only 832 * API available. 833 */ 834 PCAP_API pcap_t *pcap_open(const char *source, int snaplen, int flags, 835 int read_timeout, struct pcap_rmtauth *auth, char *errbuf); 836 PCAP_API int pcap_createsrcstr(char *source, int type, const char *host, 837 const char *port, const char *name, char *errbuf); 838 PCAP_API int pcap_parsesrcstr(const char *source, int *type, char *host, 839 char *port, char *name, char *errbuf); 840 841 /* 842 * This routine can scan a directory for savefiles, list local capture 843 * devices, or list capture devices on a remote machine running an RPCAP 844 * server. 845 * 846 * For scanning for savefiles, it can be used on both UN*X systems and 847 * Windows systems; for each directory entry it sees, it tries to open 848 * the file as a savefile using pcap_open_offline(), and only includes 849 * it in the list of files if the open succeeds, so it filters out 850 * files for which the user doesn't have read permission, as well as 851 * files that aren't valid savefiles readable by libpcap. 852 * 853 * For listing local capture devices, it's just a wrapper around 854 * pcap_findalldevs(); code using pcap_findalldevs() will work on more 855 * platforms than code using pcap_findalldevs_ex(). 856 * 857 * For listing remote capture devices, pcap_findalldevs_ex() is currently 858 * the only API available. 859 */ 860 PCAP_API int pcap_findalldevs_ex(char *source, struct pcap_rmtauth *auth, 861 pcap_if_t **alldevs, char *errbuf); 862 863 /* 864 * Sampling methods. 865 * 866 * These allow pcap_loop(), pcap_dispatch(), pcap_next(), and pcap_next_ex() 867 * to see only a sample of packets, rather than all packets. 868 * 869 * Currently, they work only on Windows local captures. 870 */ 871 872 /* 873 * Specifies that no sampling is to be done on the current capture. 874 * 875 * In this case, no sampling algorithms are applied to the current capture. 876 */ 877 #define PCAP_SAMP_NOSAMP 0 878 879 /* 880 * Specifies that only 1 out of N packets must be returned to the user. 881 * 882 * In this case, the 'value' field of the 'pcap_samp' structure indicates the 883 * number of packets (minus 1) that must be discarded before one packet got 884 * accepted. 885 * In other words, if 'value = 10', the first packet is returned to the 886 * caller, while the following 9 are discarded. 887 */ 888 #define PCAP_SAMP_1_EVERY_N 1 889 890 /* 891 * Specifies that we have to return 1 packet every N milliseconds. 892 * 893 * In this case, the 'value' field of the 'pcap_samp' structure indicates 894 * the 'waiting time' in milliseconds before one packet got accepted. 895 * In other words, if 'value = 10', the first packet is returned to the 896 * caller; the next returned one will be the first packet that arrives 897 * when 10ms have elapsed. 898 */ 899 #define PCAP_SAMP_FIRST_AFTER_N_MS 2 900 901 /* 902 * This structure defines the information related to sampling. 903 * 904 * In case the sampling is requested, the capturing device should read 905 * only a subset of the packets coming from the source. The returned packets 906 * depend on the sampling parameters. 907 * 908 * WARNING: The sampling process is applied *after* the filtering process. 909 * In other words, packets are filtered first, then the sampling process 910 * selects a subset of the 'filtered' packets and it returns them to the 911 * caller. 912 */ 913 struct pcap_samp 914 { 915 /* 916 * Method used for sampling; see above. 917 */ 918 int method; 919 920 /* 921 * This value depends on the sampling method defined. 922 * For its meaning, see above. 923 */ 924 int value; 925 }; 926 927 /* 928 * New functions. 929 */ 930 PCAP_API struct pcap_samp *pcap_setsampling(pcap_t *p); 931 932 /* 933 * RPCAP active mode. 934 */ 935 936 /* Maximum length of an host name (needed for the RPCAP active mode) */ 937 #define RPCAP_HOSTLIST_SIZE 1024 938 939 /* 940 * Some minor differences between UN*X sockets and and Winsock sockets. 941 */ 942 #ifndef _WIN32 943 /*! 944 * \brief In Winsock, a socket handle is of type SOCKET; in UN*X, it's 945 * a file descriptor, and therefore a signed integer. 946 * We define SOCKET to be a signed integer on UN*X, so that it can 947 * be used on both platforms. 948 */ 949 #define SOCKET int 950 951 /*! 952 * \brief In Winsock, the error return if socket() fails is INVALID_SOCKET; 953 * in UN*X, it's -1. 954 * We define INVALID_SOCKET to be -1 on UN*X, so that it can be used on 955 * both platforms. 956 */ 957 #define INVALID_SOCKET -1 958 #endif 959 960 PCAP_API SOCKET pcap_remoteact_accept(const char *address, const char *port, 961 const char *hostlist, char *connectinghost, 962 struct pcap_rmtauth *auth, char *errbuf); 963 PCAP_API int pcap_remoteact_list(char *hostlist, char sep, int size, 964 char *errbuf); 965 PCAP_API int pcap_remoteact_close(const char *host, char *errbuf); 966 PCAP_API void pcap_remoteact_cleanup(void); 967 #endif /* Remote capture is disabled on FreeBSD */ 968 969 #ifdef __cplusplus 970 } 971 #endif 972 973 #endif /* lib_pcap_pcap_h */ 974