xref: /freebsd/contrib/libpcap/pcap.c (revision 74d9553e43cfafc29448d0bb836916aa21dea0de)
1 /*
2  * Copyright (c) 1993, 1994, 1995, 1996, 1997, 1998
3  *	The Regents of the University of California.  All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  * 3. All advertising materials mentioning features or use of this software
14  *    must display the following acknowledgement:
15  *	This product includes software developed by the Computer Systems
16  *	Engineering Group at Lawrence Berkeley Laboratory.
17  * 4. Neither the name of the University nor of the Laboratory may be used
18  *    to endorse or promote products derived from this software without
19  *    specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  */
33 
34 #ifdef HAVE_CONFIG_H
35 #include "config.h"
36 #endif
37 
38 #ifdef _WIN32
39 #include <pcap-stdinc.h>
40 #else /* _WIN32 */
41 #if HAVE_INTTYPES_H
42 #include <inttypes.h>
43 #elif HAVE_STDINT_H
44 #include <stdint.h>
45 #endif
46 #ifdef HAVE_SYS_BITYPES_H
47 #include <sys/bitypes.h>
48 #endif
49 #include <sys/types.h>
50 #include <sys/mman.h>
51 #endif /* _WIN32 */
52 
53 #include <stdio.h>
54 #include <stdlib.h>
55 #include <string.h>
56 #if !defined(_MSC_VER) && !defined(__BORLANDC__) && !defined(__MINGW32__)
57 #include <unistd.h>
58 #endif
59 #include <fcntl.h>
60 #include <errno.h>
61 
62 #ifdef HAVE_OS_PROTO_H
63 #include "os-proto.h"
64 #endif
65 
66 #ifdef MSDOS
67 #include "pcap-dos.h"
68 #endif
69 
70 #include "pcap-int.h"
71 
72 #ifdef HAVE_DAG_API
73 #include "pcap-dag.h"
74 #endif /* HAVE_DAG_API */
75 
76 #ifdef HAVE_SEPTEL_API
77 #include "pcap-septel.h"
78 #endif /* HAVE_SEPTEL_API */
79 
80 #ifdef HAVE_SNF_API
81 #include "pcap-snf.h"
82 #endif /* HAVE_SNF_API */
83 
84 #ifdef HAVE_TC_API
85 #include "pcap-tc.h"
86 #endif /* HAVE_TC_API */
87 
88 #ifdef PCAP_SUPPORT_USB
89 #include "pcap-usb-linux.h"
90 #endif
91 
92 #ifdef PCAP_SUPPORT_BT
93 #include "pcap-bt-linux.h"
94 #endif
95 
96 #ifdef PCAP_SUPPORT_BT_MONITOR
97 #include "pcap-bt-monitor-linux.h"
98 #endif
99 
100 #ifdef PCAP_SUPPORT_NETFILTER
101 #include "pcap-netfilter-linux.h"
102 #endif
103 
104 #ifdef PCAP_SUPPORT_NETMAP
105 pcap_t* pcap_netmap_create(const char *device, char *ebuf, int *is_ours);
106 #endif
107 
108 #ifdef PCAP_SUPPORT_DBUS
109 #include "pcap-dbus.h"
110 #endif
111 
112 static int
113 pcap_not_initialized(pcap_t *pcap)
114 {
115 	/* in case the caller doesn't check for PCAP_ERROR_NOT_ACTIVATED */
116 	(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
117 	    "This handle hasn't been activated yet");
118 	/* this means 'not initialized' */
119 	return (PCAP_ERROR_NOT_ACTIVATED);
120 }
121 
122 #ifdef _WIN32
123 static void *
124 pcap_not_initialized_ptr(pcap_t *pcap)
125 {
126 	(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
127 	    "This handle hasn't been activated yet");
128 	return (NULL);
129 }
130 
131 static HANDLE
132 pcap_getevent_not_initialized(pcap_t *pcap)
133 {
134 	(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
135 	    "This handle hasn't been activated yet");
136 	return (INVALID_HANDLE_VALUE);
137 }
138 
139 static u_int
140 pcap_sendqueue_transmit_not_initialized(pcap_t *pcap, pcap_send_queue* queue, int sync)
141 {
142 	(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
143 	    "This handle hasn't been activated yet");
144 	return (0);
145 }
146 
147 static PAirpcapHandle
148 pcap_get_airpcap_handle_not_initialized(pcap_t *pcap)
149 {
150 	(void)pcap_snprintf(pcap->errbuf, sizeof(pcap->errbuf),
151 	    "This handle hasn't been activated yet");
152 	return (NULL);
153 }
154 #endif
155 
156 /*
157  * Returns 1 if rfmon mode can be set on the pcap_t, 0 if it can't,
158  * a PCAP_ERROR value on an error.
159  */
160 int
161 pcap_can_set_rfmon(pcap_t *p)
162 {
163 	return (p->can_set_rfmon_op(p));
164 }
165 
166 /*
167  * For systems where rfmon mode is never supported.
168  */
169 static int
170 pcap_cant_set_rfmon(pcap_t *p _U_)
171 {
172 	return (0);
173 }
174 
175 /*
176  * Sets *tstamp_typesp to point to an array 1 or more supported time stamp
177  * types; the return value is the number of supported time stamp types.
178  * The list should be freed by a call to pcap_free_tstamp_types() when
179  * you're done with it.
180  *
181  * A return value of 0 means "you don't get a choice of time stamp type",
182  * in which case *tstamp_typesp is set to null.
183  *
184  * PCAP_ERROR is returned on error.
185  */
186 int
187 pcap_list_tstamp_types(pcap_t *p, int **tstamp_typesp)
188 {
189 	if (p->tstamp_type_count == 0) {
190 		/*
191 		 * We don't support multiple time stamp types.
192 		 */
193 		*tstamp_typesp = NULL;
194 	} else {
195 		*tstamp_typesp = (int*)calloc(sizeof(**tstamp_typesp),
196 		    p->tstamp_type_count);
197 		if (*tstamp_typesp == NULL) {
198 			(void)pcap_snprintf(p->errbuf, sizeof(p->errbuf),
199 			    "malloc: %s", pcap_strerror(errno));
200 			return (PCAP_ERROR);
201 		}
202 		(void)memcpy(*tstamp_typesp, p->tstamp_type_list,
203 		    sizeof(**tstamp_typesp) * p->tstamp_type_count);
204 	}
205 	return (p->tstamp_type_count);
206 }
207 
208 /*
209  * In Windows, you might have a library built with one version of the
210  * C runtime library and an application built with another version of
211  * the C runtime library, which means that the library might use one
212  * version of malloc() and free() and the application might use another
213  * version of malloc() and free().  If so, that means something
214  * allocated by the library cannot be freed by the application, so we
215  * need to have a pcap_free_tstamp_types() routine to free up the list
216  * allocated by pcap_list_tstamp_types(), even though it's just a wrapper
217  * around free().
218  */
219 void
220 pcap_free_tstamp_types(int *tstamp_type_list)
221 {
222 	free(tstamp_type_list);
223 }
224 
225 /*
226  * Default one-shot callback; overridden for capture types where the
227  * packet data cannot be guaranteed to be available after the callback
228  * returns, so that a copy must be made.
229  */
230 void
231 pcap_oneshot(u_char *user, const struct pcap_pkthdr *h, const u_char *pkt)
232 {
233 	struct oneshot_userdata *sp = (struct oneshot_userdata *)user;
234 
235 	*sp->hdr = *h;
236 	*sp->pkt = pkt;
237 }
238 
239 const u_char *
240 pcap_next(pcap_t *p, struct pcap_pkthdr *h)
241 {
242 	struct oneshot_userdata s;
243 	const u_char *pkt;
244 
245 	s.hdr = h;
246 	s.pkt = &pkt;
247 	s.pd = p;
248 	if (pcap_dispatch(p, 1, p->oneshot_callback, (u_char *)&s) <= 0)
249 		return (0);
250 	return (pkt);
251 }
252 
253 int
254 pcap_next_ex(pcap_t *p, struct pcap_pkthdr **pkt_header,
255     const u_char **pkt_data)
256 {
257 	struct oneshot_userdata s;
258 
259 	s.hdr = &p->pcap_header;
260 	s.pkt = pkt_data;
261 	s.pd = p;
262 
263 	/* Saves a pointer to the packet headers */
264 	*pkt_header= &p->pcap_header;
265 
266 	if (p->rfile != NULL) {
267 		int status;
268 
269 		/* We are on an offline capture */
270 		status = pcap_offline_read(p, 1, p->oneshot_callback,
271 		    (u_char *)&s);
272 
273 		/*
274 		 * Return codes for pcap_offline_read() are:
275 		 *   -  0: EOF
276 		 *   - -1: error
277 		 *   - >1: OK
278 		 * The first one ('0') conflicts with the return code of
279 		 * 0 from pcap_read() meaning "no packets arrived before
280 		 * the timeout expired", so we map it to -2 so you can
281 		 * distinguish between an EOF from a savefile and a
282 		 * "no packets arrived before the timeout expired, try
283 		 * again" from a live capture.
284 		 */
285 		if (status == 0)
286 			return (-2);
287 		else
288 			return (status);
289 	}
290 
291 	/*
292 	 * Return codes for pcap_read() are:
293 	 *   -  0: timeout
294 	 *   - -1: error
295 	 *   - -2: loop was broken out of with pcap_breakloop()
296 	 *   - >1: OK
297 	 * The first one ('0') conflicts with the return code of 0 from
298 	 * pcap_offline_read() meaning "end of file".
299 	*/
300 	return (p->read_op(p, 1, p->oneshot_callback, (u_char *)&s));
301 }
302 
303 static struct capture_source_type {
304 	int (*findalldevs_op)(pcap_if_t **, char *);
305 	pcap_t *(*create_op)(const char *, char *, int *);
306 } capture_source_types[] = {
307 #ifdef PCAP_SUPPORT_NETMAP
308 	{ NULL, pcap_netmap_create },
309 #endif
310 #ifdef HAVE_DAG_API
311 	{ dag_findalldevs, dag_create },
312 #endif
313 #ifdef HAVE_SEPTEL_API
314 	{ septel_findalldevs, septel_create },
315 #endif
316 #ifdef HAVE_SNF_API
317 	{ snf_findalldevs, snf_create },
318 #endif
319 #ifdef HAVE_TC_API
320 	{ TcFindAllDevs, TcCreate },
321 #endif
322 #ifdef PCAP_SUPPORT_BT
323 	{ bt_findalldevs, bt_create },
324 #endif
325 #ifdef PCAP_SUPPORT_BT_MONITOR
326 	{ bt_monitor_findalldevs, bt_monitor_create },
327 #endif
328 #ifdef PCAP_SUPPORT_USB
329 	{ usb_findalldevs, usb_create },
330 #endif
331 #ifdef PCAP_SUPPORT_NETFILTER
332 	{ netfilter_findalldevs, netfilter_create },
333 #endif
334 #ifdef PCAP_SUPPORT_DBUS
335 	{ dbus_findalldevs, dbus_create },
336 #endif
337 	{ NULL, NULL }
338 };
339 
340 /*
341  * Get a list of all capture sources that are up and that we can open.
342  * Returns -1 on error, 0 otherwise.
343  * The list, as returned through "alldevsp", may be null if no interfaces
344  * were up and could be opened.
345  */
346 int
347 pcap_findalldevs(pcap_if_t **alldevsp, char *errbuf)
348 {
349 	size_t i;
350 
351 	/*
352 	 * Find all the local network interfaces on which we
353 	 * can capture.
354 	 */
355 	if (pcap_platform_finddevs(alldevsp, errbuf) == -1)
356 		return (-1);
357 
358 	/*
359 	 * Ask each of the non-local-network-interface capture
360 	 * source types what interfaces they have.
361 	 */
362 	for (i = 0; capture_source_types[i].findalldevs_op != NULL; i++) {
363 		if (capture_source_types[i].findalldevs_op(alldevsp, errbuf) == -1) {
364 			/*
365 			 * We had an error; free the list we've been
366 			 * constructing.
367 			 */
368 			if (*alldevsp != NULL) {
369 				pcap_freealldevs(*alldevsp);
370 				*alldevsp = NULL;
371 			}
372 			return (-1);
373 		}
374 	}
375 
376 	return (0);
377 }
378 
379 pcap_t *
380 pcap_create(const char *device, char *errbuf)
381 {
382 	size_t i;
383 	int is_theirs;
384 	pcap_t *p;
385 	char *device_str;
386 
387 	/*
388 	 * A null device name is equivalent to the "any" device -
389 	 * which might not be supported on this platform, but
390 	 * this means that you'll get a "not supported" error
391 	 * rather than, say, a crash when we try to dereference
392 	 * the null pointer.
393 	 */
394 	if (device == NULL)
395 		device_str = strdup("any");
396 	else {
397 #ifdef _WIN32
398 		/*
399 		 * If the string appears to be little-endian UCS-2/UTF-16,
400 		 * convert it to ASCII.
401 		 *
402 		 * XXX - to UTF-8 instead?  Or report an error if any
403 		 * character isn't ASCII?
404 		 */
405 		if (device[0] != '\0' && device[1] == '\0') {
406 			size_t length;
407 
408 			length = wcslen((wchar_t *)device);
409 			device_str = (char *)malloc(length + 1);
410 			if (device_str == NULL) {
411 				pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE,
412 				    "malloc: %s", pcap_strerror(errno));
413 				return (NULL);
414 			}
415 
416 			pcap_snprintf(device_str, length + 1, "%ws",
417 			    (const wchar_t *)device);
418 		} else
419 #endif
420 			device_str = strdup(device);
421 	}
422 	if (device_str == NULL) {
423 		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE,
424 		    "malloc: %s", pcap_strerror(errno));
425 		return (NULL);
426 	}
427 
428 	/*
429 	 * Try each of the non-local-network-interface capture
430 	 * source types until we find one that works for this
431 	 * device or run out of types.
432 	 */
433 	for (i = 0; capture_source_types[i].create_op != NULL; i++) {
434 		is_theirs = 0;
435 		p = capture_source_types[i].create_op(device_str, errbuf,
436 		    &is_theirs);
437 		if (is_theirs) {
438 			/*
439 			 * The device name refers to a device of the
440 			 * type in question; either it succeeded,
441 			 * in which case p refers to a pcap_t to
442 			 * later activate for the device, or it
443 			 * failed, in which case p is null and we
444 			 * should return that to report the failure
445 			 * to create.
446 			 */
447 			if (p == NULL) {
448 				/*
449 				 * We assume the caller filled in errbuf.
450 				 */
451 				free(device_str);
452 				return (NULL);
453 			}
454 			p->opt.device = device_str;
455 			return (p);
456 		}
457 	}
458 
459 	/*
460 	 * OK, try it as a regular network interface.
461 	 */
462 	p = pcap_create_interface(device_str, errbuf);
463 	if (p == NULL) {
464 		/*
465 		 * We assume the caller filled in errbuf.
466 		 */
467 		free(device_str);
468 		return (NULL);
469 	}
470 	p->opt.device = device_str;
471 	return (p);
472 }
473 
474 static void
475 initialize_ops(pcap_t *p)
476 {
477 	/*
478 	 * Set operation pointers for operations that only work on
479 	 * an activated pcap_t to point to a routine that returns
480 	 * a "this isn't activated" error.
481 	 */
482 	p->read_op = (read_op_t)pcap_not_initialized;
483 	p->inject_op = (inject_op_t)pcap_not_initialized;
484 	p->setfilter_op = (setfilter_op_t)pcap_not_initialized;
485 	p->setdirection_op = (setdirection_op_t)pcap_not_initialized;
486 	p->set_datalink_op = (set_datalink_op_t)pcap_not_initialized;
487 	p->getnonblock_op = (getnonblock_op_t)pcap_not_initialized;
488 	p->setnonblock_op = (setnonblock_op_t)pcap_not_initialized;
489 	p->stats_op = (stats_op_t)pcap_not_initialized;
490 #ifdef _WIN32
491 	p->stats_ex_op = (stats_ex_op_t)pcap_not_initialized_ptr;
492 	p->setbuff_op = (setbuff_op_t)pcap_not_initialized;
493 	p->setmode_op = (setmode_op_t)pcap_not_initialized;
494 	p->setmintocopy_op = (setmintocopy_op_t)pcap_not_initialized;
495 	p->getevent_op = pcap_getevent_not_initialized;
496 	p->oid_get_request_op = (oid_get_request_op_t)pcap_not_initialized;
497 	p->oid_set_request_op = (oid_set_request_op_t)pcap_not_initialized;
498 	p->sendqueue_transmit_op = pcap_sendqueue_transmit_not_initialized;
499 	p->setuserbuffer_op = (setuserbuffer_op_t)pcap_not_initialized;
500 	p->live_dump_op = (live_dump_op_t)pcap_not_initialized;
501 	p->live_dump_ended_op = (live_dump_ended_op_t)pcap_not_initialized;
502 	p->get_airpcap_handle_op = pcap_get_airpcap_handle_not_initialized;
503 #endif
504 
505 	/*
506 	 * Default cleanup operation - implementations can override
507 	 * this, but should call pcap_cleanup_live_common() after
508 	 * doing their own additional cleanup.
509 	 */
510 	p->cleanup_op = pcap_cleanup_live_common;
511 
512 	/*
513 	 * In most cases, the standard one-shot callback can
514 	 * be used for pcap_next()/pcap_next_ex().
515 	 */
516 	p->oneshot_callback = pcap_oneshot;
517 }
518 
519 static pcap_t *
520 pcap_alloc_pcap_t(char *ebuf, size_t size)
521 {
522 	char *chunk;
523 	pcap_t *p;
524 
525 	/*
526 	 * Allocate a chunk of memory big enough for a pcap_t
527 	 * plus a structure following it of size "size".  The
528 	 * structure following it is a private data structure
529 	 * for the routines that handle this pcap_t.
530 	 */
531 	chunk = malloc(sizeof (pcap_t) + size);
532 	if (chunk == NULL) {
533 		pcap_snprintf(ebuf, PCAP_ERRBUF_SIZE, "malloc: %s",
534 		    pcap_strerror(errno));
535 		return (NULL);
536 	}
537 	memset(chunk, 0, sizeof (pcap_t) + size);
538 
539 	/*
540 	 * Get a pointer to the pcap_t at the beginning.
541 	 */
542 	p = (pcap_t *)chunk;
543 
544 #ifndef _WIN32
545 	p->fd = -1;	/* not opened yet */
546 	p->selectable_fd = -1;
547 #endif
548 
549 	if (size == 0) {
550 		/* No private data was requested. */
551 		p->priv = NULL;
552 	} else {
553 		/*
554 		 * Set the pointer to the private data; that's the structure
555 		 * of size "size" following the pcap_t.
556 		 */
557 		p->priv = (void *)(chunk + sizeof (pcap_t));
558 	}
559 
560 	return (p);
561 }
562 
563 pcap_t *
564 pcap_create_common(char *ebuf, size_t size)
565 {
566 	pcap_t *p;
567 
568 	p = pcap_alloc_pcap_t(ebuf, size);
569 	if (p == NULL)
570 		return (NULL);
571 
572 	/*
573 	 * Default to "can't set rfmon mode"; if it's supported by
574 	 * a platform, the create routine that called us can set
575 	 * the op to its routine to check whether a particular
576 	 * device supports it.
577 	 */
578 	p->can_set_rfmon_op = pcap_cant_set_rfmon;
579 
580 	initialize_ops(p);
581 
582 	/* put in some defaults*/
583  	p->snapshot = MAXIMUM_SNAPLEN;	/* max packet size */
584 	p->opt.timeout = 0;		/* no timeout specified */
585 	p->opt.buffer_size = 0;		/* use the platform's default */
586 	p->opt.promisc = 0;
587 	p->opt.rfmon = 0;
588 	p->opt.immediate = 0;
589 	p->opt.tstamp_type = -1;	/* default to not setting time stamp type */
590 	p->opt.tstamp_precision = PCAP_TSTAMP_PRECISION_MICRO;
591 
592 	/*
593 	 * Start out with no BPF code generation flags set.
594 	 */
595 	p->bpf_codegen_flags = 0;
596 
597 	return (p);
598 }
599 
600 int
601 pcap_check_activated(pcap_t *p)
602 {
603 	if (p->activated) {
604 		pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "can't perform "
605 			" operation on activated capture");
606 		return (-1);
607 	}
608 	return (0);
609 }
610 
611 int
612 pcap_set_snaplen(pcap_t *p, int snaplen)
613 {
614 	if (pcap_check_activated(p))
615 		return (PCAP_ERROR_ACTIVATED);
616 
617 	/*
618 	 * Turn invalid values, or excessively large values, into
619 	 * the maximum allowed value.
620 	 *
621 	 * If some application really *needs* a bigger snapshot
622 	 * length, we should just increase MAXIMUM_SNAPLEN.
623 	 */
624 	if (snaplen <= 0 || snaplen > MAXIMUM_SNAPLEN)
625 		snaplen = MAXIMUM_SNAPLEN;
626 	p->snapshot = snaplen;
627 	return (0);
628 }
629 
630 int
631 pcap_set_promisc(pcap_t *p, int promisc)
632 {
633 	if (pcap_check_activated(p))
634 		return (PCAP_ERROR_ACTIVATED);
635 	p->opt.promisc = promisc;
636 	return (0);
637 }
638 
639 int
640 pcap_set_rfmon(pcap_t *p, int rfmon)
641 {
642 	if (pcap_check_activated(p))
643 		return (PCAP_ERROR_ACTIVATED);
644 	p->opt.rfmon = rfmon;
645 	return (0);
646 }
647 
648 int
649 pcap_set_timeout(pcap_t *p, int timeout_ms)
650 {
651 	if (pcap_check_activated(p))
652 		return (PCAP_ERROR_ACTIVATED);
653 	p->opt.timeout = timeout_ms;
654 	return (0);
655 }
656 
657 int
658 pcap_set_tstamp_type(pcap_t *p, int tstamp_type)
659 {
660 	int i;
661 
662 	if (pcap_check_activated(p))
663 		return (PCAP_ERROR_ACTIVATED);
664 
665 	/*
666 	 * The argument should have been u_int, but that's too late
667 	 * to change now - it's an API.
668 	 */
669 	if (tstamp_type < 0)
670 		return (PCAP_WARNING_TSTAMP_TYPE_NOTSUP);
671 
672 	/*
673 	 * If p->tstamp_type_count is 0, we only support PCAP_TSTAMP_HOST;
674 	 * the default time stamp type is PCAP_TSTAMP_HOST.
675 	 */
676 	if (p->tstamp_type_count == 0) {
677 		if (tstamp_type == PCAP_TSTAMP_HOST) {
678 			p->opt.tstamp_type = tstamp_type;
679 			return (0);
680 		}
681 	} else {
682 		/*
683 		 * Check whether we claim to support this type of time stamp.
684 		 */
685 		for (i = 0; i < p->tstamp_type_count; i++) {
686 			if (p->tstamp_type_list[i] == (u_int)tstamp_type) {
687 				/*
688 				 * Yes.
689 				 */
690 				p->opt.tstamp_type = tstamp_type;
691 				return (0);
692 			}
693 		}
694 	}
695 
696 	/*
697 	 * We don't support this type of time stamp.
698 	 */
699 	return (PCAP_WARNING_TSTAMP_TYPE_NOTSUP);
700 }
701 
702 int
703 pcap_set_immediate_mode(pcap_t *p, int immediate)
704 {
705 	if (pcap_check_activated(p))
706 		return (PCAP_ERROR_ACTIVATED);
707 	p->opt.immediate = immediate;
708 	return (0);
709 }
710 
711 int
712 pcap_set_buffer_size(pcap_t *p, int buffer_size)
713 {
714 	if (pcap_check_activated(p))
715 		return (PCAP_ERROR_ACTIVATED);
716 	if (buffer_size <= 0) {
717 		/*
718 		 * Silently ignore invalid values.
719 		 */
720 		return (0);
721 	}
722 	p->opt.buffer_size = buffer_size;
723 	return (0);
724 }
725 
726 int
727 pcap_set_tstamp_precision(pcap_t *p, int tstamp_precision)
728 {
729 	int i;
730 
731 	if (pcap_check_activated(p))
732 		return (PCAP_ERROR_ACTIVATED);
733 
734 	/*
735 	 * The argument should have been u_int, but that's too late
736 	 * to change now - it's an API.
737 	 */
738 	if (tstamp_precision < 0)
739 		return (PCAP_ERROR_TSTAMP_PRECISION_NOTSUP);
740 
741 	/*
742 	 * If p->tstamp_precision_count is 0, we only support setting
743 	 * the time stamp precision to microsecond precision; every
744 	 * pcap module *MUST* support microsecond precision, even if
745 	 * it does so by converting the native precision to
746 	 * microseconds.
747 	 */
748 	if (p->tstamp_precision_count == 0) {
749 		if (tstamp_precision == PCAP_TSTAMP_PRECISION_MICRO) {
750 			p->opt.tstamp_precision = tstamp_precision;
751 			return (0);
752 		}
753 	} else {
754 		/*
755 		 * Check whether we claim to support this precision of
756 		 * time stamp.
757 		 */
758 		for (i = 0; i < p->tstamp_precision_count; i++) {
759 			if (p->tstamp_precision_list[i] == (u_int)tstamp_precision) {
760 				/*
761 				 * Yes.
762 				 */
763 				p->opt.tstamp_precision = tstamp_precision;
764 				return (0);
765 			}
766 		}
767 	}
768 
769 	/*
770 	 * We don't support this time stamp precision.
771 	 */
772 	return (PCAP_ERROR_TSTAMP_PRECISION_NOTSUP);
773 }
774 
775 int
776 pcap_get_tstamp_precision(pcap_t *p)
777 {
778         return (p->opt.tstamp_precision);
779 }
780 
781 int
782 pcap_activate(pcap_t *p)
783 {
784 	int status;
785 
786 	/*
787 	 * Catch attempts to re-activate an already-activated
788 	 * pcap_t; this should, for example, catch code that
789 	 * calls pcap_open_live() followed by pcap_activate(),
790 	 * as some code that showed up in a Stack Exchange
791 	 * question did.
792 	 */
793 	if (pcap_check_activated(p))
794 		return (PCAP_ERROR_ACTIVATED);
795 	status = p->activate_op(p);
796 	if (status >= 0)
797 		p->activated = 1;
798 	else {
799 		if (p->errbuf[0] == '\0') {
800 			/*
801 			 * No error message supplied by the activate routine;
802 			 * for the benefit of programs that don't specially
803 			 * handle errors other than PCAP_ERROR, return the
804 			 * error message corresponding to the status.
805 			 */
806 			pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE, "%s",
807 			    pcap_statustostr(status));
808 		}
809 
810 		/*
811 		 * Undo any operation pointer setting, etc. done by
812 		 * the activate operation.
813 		 */
814 		initialize_ops(p);
815 	}
816 	return (status);
817 }
818 
819 pcap_t *
820 pcap_open_live(const char *device, int snaplen, int promisc, int to_ms, char *errbuf)
821 {
822 	pcap_t *p;
823 	int status;
824 
825 	p = pcap_create(device, errbuf);
826 	if (p == NULL)
827 		return (NULL);
828 	status = pcap_set_snaplen(p, snaplen);
829 	if (status < 0)
830 		goto fail;
831 	status = pcap_set_promisc(p, promisc);
832 	if (status < 0)
833 		goto fail;
834 	status = pcap_set_timeout(p, to_ms);
835 	if (status < 0)
836 		goto fail;
837 	/*
838 	 * Mark this as opened with pcap_open_live(), so that, for
839 	 * example, we show the full list of DLT_ values, rather
840 	 * than just the ones that are compatible with capturing
841 	 * when not in monitor mode.  That allows existing applications
842 	 * to work the way they used to work, but allows new applications
843 	 * that know about the new open API to, for example, find out the
844 	 * DLT_ values that they can select without changing whether
845 	 * the adapter is in monitor mode or not.
846 	 */
847 	p->oldstyle = 1;
848 	status = pcap_activate(p);
849 	if (status < 0)
850 		goto fail;
851 	return (p);
852 fail:
853 	if (status == PCAP_ERROR)
854 		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", device,
855 		    p->errbuf);
856 	else if (status == PCAP_ERROR_NO_SUCH_DEVICE ||
857 	    status == PCAP_ERROR_PERM_DENIED ||
858 	    status == PCAP_ERROR_PROMISC_PERM_DENIED)
859 		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s (%s)", device,
860 		    pcap_statustostr(status), p->errbuf);
861 	else
862 		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "%s: %s", device,
863 		    pcap_statustostr(status));
864 	pcap_close(p);
865 	return (NULL);
866 }
867 
868 pcap_t *
869 pcap_open_offline_common(char *ebuf, size_t size)
870 {
871 	pcap_t *p;
872 
873 	p = pcap_alloc_pcap_t(ebuf, size);
874 	if (p == NULL)
875 		return (NULL);
876 
877 	p->opt.tstamp_precision = PCAP_TSTAMP_PRECISION_MICRO;
878 
879 	return (p);
880 }
881 
882 int
883 pcap_dispatch(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
884 {
885 	return (p->read_op(p, cnt, callback, user));
886 }
887 
888 int
889 pcap_loop(pcap_t *p, int cnt, pcap_handler callback, u_char *user)
890 {
891 	register int n;
892 
893 	for (;;) {
894 		if (p->rfile != NULL) {
895 			/*
896 			 * 0 means EOF, so don't loop if we get 0.
897 			 */
898 			n = pcap_offline_read(p, cnt, callback, user);
899 		} else {
900 			/*
901 			 * XXX keep reading until we get something
902 			 * (or an error occurs)
903 			 */
904 			do {
905 				n = p->read_op(p, cnt, callback, user);
906 			} while (n == 0);
907 		}
908 		if (n <= 0)
909 			return (n);
910 		if (!PACKET_COUNT_IS_UNLIMITED(cnt)) {
911 			cnt -= n;
912 			if (cnt <= 0)
913 				return (0);
914 		}
915 	}
916 }
917 
918 /*
919  * Force the loop in "pcap_read()" or "pcap_read_offline()" to terminate.
920  */
921 void
922 pcap_breakloop(pcap_t *p)
923 {
924 	p->break_loop = 1;
925 }
926 
927 int
928 pcap_datalink(pcap_t *p)
929 {
930 	if (!p->activated)
931 		return (PCAP_ERROR_NOT_ACTIVATED);
932 	return (p->linktype);
933 }
934 
935 int
936 pcap_datalink_ext(pcap_t *p)
937 {
938 	if (!p->activated)
939 		return (PCAP_ERROR_NOT_ACTIVATED);
940 	return (p->linktype_ext);
941 }
942 
943 int
944 pcap_list_datalinks(pcap_t *p, int **dlt_buffer)
945 {
946 	if (!p->activated)
947 		return (PCAP_ERROR_NOT_ACTIVATED);
948 	if (p->dlt_count == 0) {
949 		/*
950 		 * We couldn't fetch the list of DLTs, which means
951 		 * this platform doesn't support changing the
952 		 * DLT for an interface.  Return a list of DLTs
953 		 * containing only the DLT this device supports.
954 		 */
955 		*dlt_buffer = (int*)malloc(sizeof(**dlt_buffer));
956 		if (*dlt_buffer == NULL) {
957 			(void)pcap_snprintf(p->errbuf, sizeof(p->errbuf),
958 			    "malloc: %s", pcap_strerror(errno));
959 			return (PCAP_ERROR);
960 		}
961 		**dlt_buffer = p->linktype;
962 		return (1);
963 	} else {
964 		*dlt_buffer = (int*)calloc(sizeof(**dlt_buffer), p->dlt_count);
965 		if (*dlt_buffer == NULL) {
966 			(void)pcap_snprintf(p->errbuf, sizeof(p->errbuf),
967 			    "malloc: %s", pcap_strerror(errno));
968 			return (PCAP_ERROR);
969 		}
970 		(void)memcpy(*dlt_buffer, p->dlt_list,
971 		    sizeof(**dlt_buffer) * p->dlt_count);
972 		return (p->dlt_count);
973 	}
974 }
975 
976 /*
977  * In Windows, you might have a library built with one version of the
978  * C runtime library and an application built with another version of
979  * the C runtime library, which means that the library might use one
980  * version of malloc() and free() and the application might use another
981  * version of malloc() and free().  If so, that means something
982  * allocated by the library cannot be freed by the application, so we
983  * need to have a pcap_free_datalinks() routine to free up the list
984  * allocated by pcap_list_datalinks(), even though it's just a wrapper
985  * around free().
986  */
987 void
988 pcap_free_datalinks(int *dlt_list)
989 {
990 	free(dlt_list);
991 }
992 
993 int
994 pcap_set_datalink(pcap_t *p, int dlt)
995 {
996 	int i;
997 	const char *dlt_name;
998 
999 	if (dlt < 0)
1000 		goto unsupported;
1001 
1002 	if (p->dlt_count == 0 || p->set_datalink_op == NULL) {
1003 		/*
1004 		 * We couldn't fetch the list of DLTs, or we don't
1005 		 * have a "set datalink" operation, which means
1006 		 * this platform doesn't support changing the
1007 		 * DLT for an interface.  Check whether the new
1008 		 * DLT is the one this interface supports.
1009 		 */
1010 		if (p->linktype != dlt)
1011 			goto unsupported;
1012 
1013 		/*
1014 		 * It is, so there's nothing we need to do here.
1015 		 */
1016 		return (0);
1017 	}
1018 	for (i = 0; i < p->dlt_count; i++)
1019 		if (p->dlt_list[i] == (u_int)dlt)
1020 			break;
1021 	if (i >= p->dlt_count)
1022 		goto unsupported;
1023 	if (p->dlt_count == 2 && p->dlt_list[0] == DLT_EN10MB &&
1024 	    dlt == DLT_DOCSIS) {
1025 		/*
1026 		 * This is presumably an Ethernet device, as the first
1027 		 * link-layer type it offers is DLT_EN10MB, and the only
1028 		 * other type it offers is DLT_DOCSIS.  That means that
1029 		 * we can't tell the driver to supply DOCSIS link-layer
1030 		 * headers - we're just pretending that's what we're
1031 		 * getting, as, presumably, we're capturing on a dedicated
1032 		 * link to a Cisco Cable Modem Termination System, and
1033 		 * it's putting raw DOCSIS frames on the wire inside low-level
1034 		 * Ethernet framing.
1035 		 */
1036 		p->linktype = dlt;
1037 		return (0);
1038 	}
1039 	if (p->set_datalink_op(p, dlt) == -1)
1040 		return (-1);
1041 	p->linktype = dlt;
1042 	return (0);
1043 
1044 unsupported:
1045 	dlt_name = pcap_datalink_val_to_name(dlt);
1046 	if (dlt_name != NULL) {
1047 		(void) pcap_snprintf(p->errbuf, sizeof(p->errbuf),
1048 		    "%s is not one of the DLTs supported by this device",
1049 		    dlt_name);
1050 	} else {
1051 		(void) pcap_snprintf(p->errbuf, sizeof(p->errbuf),
1052 		    "DLT %d is not one of the DLTs supported by this device",
1053 		    dlt);
1054 	}
1055 	return (-1);
1056 }
1057 
1058 /*
1059  * This array is designed for mapping upper and lower case letter
1060  * together for a case independent comparison.  The mappings are
1061  * based upon ascii character sequences.
1062  */
1063 static const u_char charmap[] = {
1064 	(u_char)'\000', (u_char)'\001', (u_char)'\002', (u_char)'\003',
1065 	(u_char)'\004', (u_char)'\005', (u_char)'\006', (u_char)'\007',
1066 	(u_char)'\010', (u_char)'\011', (u_char)'\012', (u_char)'\013',
1067 	(u_char)'\014', (u_char)'\015', (u_char)'\016', (u_char)'\017',
1068 	(u_char)'\020', (u_char)'\021', (u_char)'\022', (u_char)'\023',
1069 	(u_char)'\024', (u_char)'\025', (u_char)'\026', (u_char)'\027',
1070 	(u_char)'\030', (u_char)'\031', (u_char)'\032', (u_char)'\033',
1071 	(u_char)'\034', (u_char)'\035', (u_char)'\036', (u_char)'\037',
1072 	(u_char)'\040', (u_char)'\041', (u_char)'\042', (u_char)'\043',
1073 	(u_char)'\044', (u_char)'\045', (u_char)'\046', (u_char)'\047',
1074 	(u_char)'\050', (u_char)'\051', (u_char)'\052', (u_char)'\053',
1075 	(u_char)'\054', (u_char)'\055', (u_char)'\056', (u_char)'\057',
1076 	(u_char)'\060', (u_char)'\061', (u_char)'\062', (u_char)'\063',
1077 	(u_char)'\064', (u_char)'\065', (u_char)'\066', (u_char)'\067',
1078 	(u_char)'\070', (u_char)'\071', (u_char)'\072', (u_char)'\073',
1079 	(u_char)'\074', (u_char)'\075', (u_char)'\076', (u_char)'\077',
1080 	(u_char)'\100', (u_char)'\141', (u_char)'\142', (u_char)'\143',
1081 	(u_char)'\144', (u_char)'\145', (u_char)'\146', (u_char)'\147',
1082 	(u_char)'\150', (u_char)'\151', (u_char)'\152', (u_char)'\153',
1083 	(u_char)'\154', (u_char)'\155', (u_char)'\156', (u_char)'\157',
1084 	(u_char)'\160', (u_char)'\161', (u_char)'\162', (u_char)'\163',
1085 	(u_char)'\164', (u_char)'\165', (u_char)'\166', (u_char)'\167',
1086 	(u_char)'\170', (u_char)'\171', (u_char)'\172', (u_char)'\133',
1087 	(u_char)'\134', (u_char)'\135', (u_char)'\136', (u_char)'\137',
1088 	(u_char)'\140', (u_char)'\141', (u_char)'\142', (u_char)'\143',
1089 	(u_char)'\144', (u_char)'\145', (u_char)'\146', (u_char)'\147',
1090 	(u_char)'\150', (u_char)'\151', (u_char)'\152', (u_char)'\153',
1091 	(u_char)'\154', (u_char)'\155', (u_char)'\156', (u_char)'\157',
1092 	(u_char)'\160', (u_char)'\161', (u_char)'\162', (u_char)'\163',
1093 	(u_char)'\164', (u_char)'\165', (u_char)'\166', (u_char)'\167',
1094 	(u_char)'\170', (u_char)'\171', (u_char)'\172', (u_char)'\173',
1095 	(u_char)'\174', (u_char)'\175', (u_char)'\176', (u_char)'\177',
1096 	(u_char)'\200', (u_char)'\201', (u_char)'\202', (u_char)'\203',
1097 	(u_char)'\204', (u_char)'\205', (u_char)'\206', (u_char)'\207',
1098 	(u_char)'\210', (u_char)'\211', (u_char)'\212', (u_char)'\213',
1099 	(u_char)'\214', (u_char)'\215', (u_char)'\216', (u_char)'\217',
1100 	(u_char)'\220', (u_char)'\221', (u_char)'\222', (u_char)'\223',
1101 	(u_char)'\224', (u_char)'\225', (u_char)'\226', (u_char)'\227',
1102 	(u_char)'\230', (u_char)'\231', (u_char)'\232', (u_char)'\233',
1103 	(u_char)'\234', (u_char)'\235', (u_char)'\236', (u_char)'\237',
1104 	(u_char)'\240', (u_char)'\241', (u_char)'\242', (u_char)'\243',
1105 	(u_char)'\244', (u_char)'\245', (u_char)'\246', (u_char)'\247',
1106 	(u_char)'\250', (u_char)'\251', (u_char)'\252', (u_char)'\253',
1107 	(u_char)'\254', (u_char)'\255', (u_char)'\256', (u_char)'\257',
1108 	(u_char)'\260', (u_char)'\261', (u_char)'\262', (u_char)'\263',
1109 	(u_char)'\264', (u_char)'\265', (u_char)'\266', (u_char)'\267',
1110 	(u_char)'\270', (u_char)'\271', (u_char)'\272', (u_char)'\273',
1111 	(u_char)'\274', (u_char)'\275', (u_char)'\276', (u_char)'\277',
1112 	(u_char)'\300', (u_char)'\341', (u_char)'\342', (u_char)'\343',
1113 	(u_char)'\344', (u_char)'\345', (u_char)'\346', (u_char)'\347',
1114 	(u_char)'\350', (u_char)'\351', (u_char)'\352', (u_char)'\353',
1115 	(u_char)'\354', (u_char)'\355', (u_char)'\356', (u_char)'\357',
1116 	(u_char)'\360', (u_char)'\361', (u_char)'\362', (u_char)'\363',
1117 	(u_char)'\364', (u_char)'\365', (u_char)'\366', (u_char)'\367',
1118 	(u_char)'\370', (u_char)'\371', (u_char)'\372', (u_char)'\333',
1119 	(u_char)'\334', (u_char)'\335', (u_char)'\336', (u_char)'\337',
1120 	(u_char)'\340', (u_char)'\341', (u_char)'\342', (u_char)'\343',
1121 	(u_char)'\344', (u_char)'\345', (u_char)'\346', (u_char)'\347',
1122 	(u_char)'\350', (u_char)'\351', (u_char)'\352', (u_char)'\353',
1123 	(u_char)'\354', (u_char)'\355', (u_char)'\356', (u_char)'\357',
1124 	(u_char)'\360', (u_char)'\361', (u_char)'\362', (u_char)'\363',
1125 	(u_char)'\364', (u_char)'\365', (u_char)'\366', (u_char)'\367',
1126 	(u_char)'\370', (u_char)'\371', (u_char)'\372', (u_char)'\373',
1127 	(u_char)'\374', (u_char)'\375', (u_char)'\376', (u_char)'\377',
1128 };
1129 
1130 int
1131 pcap_strcasecmp(const char *s1, const char *s2)
1132 {
1133 	register const u_char	*cm = charmap,
1134 				*us1 = (const u_char *)s1,
1135 				*us2 = (const u_char *)s2;
1136 
1137 	while (cm[*us1] == cm[*us2++])
1138 		if (*us1++ == '\0')
1139 			return(0);
1140 	return (cm[*us1] - cm[*--us2]);
1141 }
1142 
1143 struct dlt_choice {
1144 	const char *name;
1145 	const char *description;
1146 	int	dlt;
1147 };
1148 
1149 #define DLT_CHOICE(code, description) { #code, description, DLT_ ## code }
1150 #define DLT_CHOICE_SENTINEL { NULL, NULL, 0 }
1151 
1152 static struct dlt_choice dlt_choices[] = {
1153 	DLT_CHOICE(NULL, "BSD loopback"),
1154 	DLT_CHOICE(EN10MB, "Ethernet"),
1155 	DLT_CHOICE(IEEE802, "Token ring"),
1156 	DLT_CHOICE(ARCNET, "BSD ARCNET"),
1157 	DLT_CHOICE(SLIP, "SLIP"),
1158 	DLT_CHOICE(PPP, "PPP"),
1159 	DLT_CHOICE(FDDI, "FDDI"),
1160 	DLT_CHOICE(ATM_RFC1483, "RFC 1483 LLC-encapsulated ATM"),
1161 	DLT_CHOICE(RAW, "Raw IP"),
1162 	DLT_CHOICE(SLIP_BSDOS, "BSD/OS SLIP"),
1163 	DLT_CHOICE(PPP_BSDOS, "BSD/OS PPP"),
1164 	DLT_CHOICE(ATM_CLIP, "Linux Classical IP-over-ATM"),
1165 	DLT_CHOICE(PPP_SERIAL, "PPP over serial"),
1166 	DLT_CHOICE(PPP_ETHER, "PPPoE"),
1167 	DLT_CHOICE(SYMANTEC_FIREWALL, "Symantec Firewall"),
1168 	DLT_CHOICE(C_HDLC, "Cisco HDLC"),
1169 	DLT_CHOICE(IEEE802_11, "802.11"),
1170 	DLT_CHOICE(FRELAY, "Frame Relay"),
1171 	DLT_CHOICE(LOOP, "OpenBSD loopback"),
1172 	DLT_CHOICE(ENC, "OpenBSD encapsulated IP"),
1173 	DLT_CHOICE(LINUX_SLL, "Linux cooked"),
1174 	DLT_CHOICE(LTALK, "Localtalk"),
1175 	DLT_CHOICE(PFLOG, "OpenBSD pflog file"),
1176 	DLT_CHOICE(PFSYNC, "Packet filter state syncing"),
1177 	DLT_CHOICE(PRISM_HEADER, "802.11 plus Prism header"),
1178 	DLT_CHOICE(IP_OVER_FC, "RFC 2625 IP-over-Fibre Channel"),
1179 	DLT_CHOICE(SUNATM, "Sun raw ATM"),
1180 	DLT_CHOICE(IEEE802_11_RADIO, "802.11 plus radiotap header"),
1181 	DLT_CHOICE(ARCNET_LINUX, "Linux ARCNET"),
1182 	DLT_CHOICE(JUNIPER_MLPPP, "Juniper Multi-Link PPP"),
1183 	DLT_CHOICE(JUNIPER_MLFR, "Juniper Multi-Link Frame Relay"),
1184 	DLT_CHOICE(JUNIPER_ES, "Juniper Encryption Services PIC"),
1185 	DLT_CHOICE(JUNIPER_GGSN, "Juniper GGSN PIC"),
1186 	DLT_CHOICE(JUNIPER_MFR, "Juniper FRF.16 Frame Relay"),
1187 	DLT_CHOICE(JUNIPER_ATM2, "Juniper ATM2 PIC"),
1188 	DLT_CHOICE(JUNIPER_SERVICES, "Juniper Advanced Services PIC"),
1189 	DLT_CHOICE(JUNIPER_ATM1, "Juniper ATM1 PIC"),
1190 	DLT_CHOICE(APPLE_IP_OVER_IEEE1394, "Apple IP-over-IEEE 1394"),
1191 	DLT_CHOICE(MTP2_WITH_PHDR, "SS7 MTP2 with Pseudo-header"),
1192 	DLT_CHOICE(MTP2, "SS7 MTP2"),
1193 	DLT_CHOICE(MTP3, "SS7 MTP3"),
1194 	DLT_CHOICE(SCCP, "SS7 SCCP"),
1195 	DLT_CHOICE(DOCSIS, "DOCSIS"),
1196 	DLT_CHOICE(LINUX_IRDA, "Linux IrDA"),
1197 	DLT_CHOICE(IEEE802_11_RADIO_AVS, "802.11 plus AVS radio information header"),
1198 	DLT_CHOICE(JUNIPER_MONITOR, "Juniper Passive Monitor PIC"),
1199 	DLT_CHOICE(BACNET_MS_TP, "BACnet MS/TP"),
1200 	DLT_CHOICE(PPP_PPPD, "PPP for pppd, with direction flag"),
1201 	DLT_CHOICE(JUNIPER_PPPOE, "Juniper PPPoE"),
1202 	DLT_CHOICE(JUNIPER_PPPOE_ATM, "Juniper PPPoE/ATM"),
1203 	DLT_CHOICE(GPRS_LLC, "GPRS LLC"),
1204 	DLT_CHOICE(GPF_T, "GPF-T"),
1205 	DLT_CHOICE(GPF_F, "GPF-F"),
1206 	DLT_CHOICE(JUNIPER_PIC_PEER, "Juniper PIC Peer"),
1207 	DLT_CHOICE(ERF_ETH,	"Ethernet with Endace ERF header"),
1208 	DLT_CHOICE(ERF_POS, "Packet-over-SONET with Endace ERF header"),
1209 	DLT_CHOICE(LINUX_LAPD, "Linux vISDN LAPD"),
1210 	DLT_CHOICE(JUNIPER_ETHER, "Juniper Ethernet"),
1211 	DLT_CHOICE(JUNIPER_PPP, "Juniper PPP"),
1212 	DLT_CHOICE(JUNIPER_FRELAY, "Juniper Frame Relay"),
1213 	DLT_CHOICE(JUNIPER_CHDLC, "Juniper C-HDLC"),
1214 	DLT_CHOICE(MFR, "FRF.16 Frame Relay"),
1215 	DLT_CHOICE(JUNIPER_VP, "Juniper Voice PIC"),
1216 	DLT_CHOICE(A429, "Arinc 429"),
1217 	DLT_CHOICE(A653_ICM, "Arinc 653 Interpartition Communication"),
1218 	DLT_CHOICE(USB_FREEBSD, "USB with FreeBSD header"),
1219 	DLT_CHOICE(BLUETOOTH_HCI_H4, "Bluetooth HCI UART transport layer"),
1220 	DLT_CHOICE(IEEE802_16_MAC_CPS, "IEEE 802.16 MAC Common Part Sublayer"),
1221 	DLT_CHOICE(USB_LINUX, "USB with Linux header"),
1222 	DLT_CHOICE(CAN20B, "Controller Area Network (CAN) v. 2.0B"),
1223 	DLT_CHOICE(IEEE802_15_4_LINUX, "IEEE 802.15.4 with Linux padding"),
1224 	DLT_CHOICE(PPI, "Per-Packet Information"),
1225 	DLT_CHOICE(IEEE802_16_MAC_CPS_RADIO, "IEEE 802.16 MAC Common Part Sublayer plus radiotap header"),
1226 	DLT_CHOICE(JUNIPER_ISM, "Juniper Integrated Service Module"),
1227 	DLT_CHOICE(IEEE802_15_4, "IEEE 802.15.4 with FCS"),
1228 	DLT_CHOICE(SITA, "SITA pseudo-header"),
1229 	DLT_CHOICE(ERF, "Endace ERF header"),
1230 	DLT_CHOICE(RAIF1, "Ethernet with u10 Networks pseudo-header"),
1231 	DLT_CHOICE(IPMB, "IPMB"),
1232 	DLT_CHOICE(JUNIPER_ST, "Juniper Secure Tunnel"),
1233 	DLT_CHOICE(BLUETOOTH_HCI_H4_WITH_PHDR, "Bluetooth HCI UART transport layer plus pseudo-header"),
1234 	DLT_CHOICE(AX25_KISS, "AX.25 with KISS header"),
1235 	DLT_CHOICE(IEEE802_15_4_NONASK_PHY, "IEEE 802.15.4 with non-ASK PHY data"),
1236 	DLT_CHOICE(MPLS, "MPLS with label as link-layer header"),
1237 	DLT_CHOICE(LINUX_EVDEV, "Linux evdev events"),
1238 	DLT_CHOICE(USB_LINUX_MMAPPED, "USB with padded Linux header"),
1239 	DLT_CHOICE(DECT, "DECT"),
1240 	DLT_CHOICE(AOS, "AOS Space Data Link protocol"),
1241 	DLT_CHOICE(WIHART, "Wireless HART"),
1242 	DLT_CHOICE(FC_2, "Fibre Channel FC-2"),
1243 	DLT_CHOICE(FC_2_WITH_FRAME_DELIMS, "Fibre Channel FC-2 with frame delimiters"),
1244 	DLT_CHOICE(IPNET, "Solaris ipnet"),
1245 	DLT_CHOICE(CAN_SOCKETCAN, "CAN-bus with SocketCAN headers"),
1246 	DLT_CHOICE(IPV4, "Raw IPv4"),
1247 	DLT_CHOICE(IPV6, "Raw IPv6"),
1248 	DLT_CHOICE(IEEE802_15_4_NOFCS, "IEEE 802.15.4 without FCS"),
1249 	DLT_CHOICE(DBUS, "D-Bus"),
1250 	DLT_CHOICE(JUNIPER_VS, "Juniper Virtual Server"),
1251 	DLT_CHOICE(JUNIPER_SRX_E2E, "Juniper SRX E2E"),
1252 	DLT_CHOICE(JUNIPER_FIBRECHANNEL, "Juniper Fibre Channel"),
1253 	DLT_CHOICE(DVB_CI, "DVB-CI"),
1254 	DLT_CHOICE(MUX27010, "MUX27010"),
1255 	DLT_CHOICE(STANAG_5066_D_PDU, "STANAG 5066 D_PDUs"),
1256 	DLT_CHOICE(JUNIPER_ATM_CEMIC, "Juniper ATM CEMIC"),
1257 	DLT_CHOICE(NFLOG, "Linux netfilter log messages"),
1258 	DLT_CHOICE(NETANALYZER, "Ethernet with Hilscher netANALYZER pseudo-header"),
1259 	DLT_CHOICE(NETANALYZER_TRANSPARENT, "Ethernet with Hilscher netANALYZER pseudo-header and with preamble and SFD"),
1260 	DLT_CHOICE(IPOIB, "RFC 4391 IP-over-Infiniband"),
1261 	DLT_CHOICE(MPEG_2_TS, "MPEG-2 transport stream"),
1262 	DLT_CHOICE(NG40, "ng40 protocol tester Iub/Iur"),
1263 	DLT_CHOICE(NFC_LLCP, "NFC LLCP PDUs with pseudo-header"),
1264 	DLT_CHOICE(INFINIBAND, "InfiniBand"),
1265 	DLT_CHOICE(SCTP, "SCTP"),
1266 	DLT_CHOICE(USBPCAP, "USB with USBPcap header"),
1267 	DLT_CHOICE(RTAC_SERIAL, "Schweitzer Engineering Laboratories RTAC packets"),
1268 	DLT_CHOICE(BLUETOOTH_LE_LL, "Bluetooth Low Energy air interface"),
1269 	DLT_CHOICE(NETLINK, "Linux netlink"),
1270 	DLT_CHOICE(BLUETOOTH_LINUX_MONITOR, "Bluetooth Linux Monitor"),
1271 	DLT_CHOICE(BLUETOOTH_BREDR_BB, "Bluetooth Basic Rate/Enhanced Data Rate baseband packets"),
1272 	DLT_CHOICE(BLUETOOTH_LE_LL_WITH_PHDR, "Bluetooth Low Energy air interface with pseudo-header"),
1273 	DLT_CHOICE(PROFIBUS_DL, "PROFIBUS data link layer"),
1274 	DLT_CHOICE(PKTAP, "Apple DLT_PKTAP"),
1275 	DLT_CHOICE(EPON, "Ethernet with 802.3 Clause 65 EPON preamble"),
1276 	DLT_CHOICE(IPMI_HPM_2, "IPMI trace packets"),
1277 	DLT_CHOICE(ZWAVE_R1_R2, "Z-Wave RF profile R1 and R2 packets"),
1278 	DLT_CHOICE(ZWAVE_R3, "Z-Wave RF profile R3 packets"),
1279 	DLT_CHOICE(WATTSTOPPER_DLM, "WattStopper Digital Lighting Management (DLM) and Legrand Nitoo Open protocol"),
1280 	DLT_CHOICE(ISO_14443, "ISO 14443 messages"),
1281 	DLT_CHOICE(RDS, "IEC 62106 Radio Data System groups"),
1282 	DLT_CHOICE_SENTINEL
1283 };
1284 
1285 int
1286 pcap_datalink_name_to_val(const char *name)
1287 {
1288 	int i;
1289 
1290 	for (i = 0; dlt_choices[i].name != NULL; i++) {
1291 		if (pcap_strcasecmp(dlt_choices[i].name, name) == 0)
1292 			return (dlt_choices[i].dlt);
1293 	}
1294 	return (-1);
1295 }
1296 
1297 const char *
1298 pcap_datalink_val_to_name(int dlt)
1299 {
1300 	int i;
1301 
1302 	for (i = 0; dlt_choices[i].name != NULL; i++) {
1303 		if (dlt_choices[i].dlt == dlt)
1304 			return (dlt_choices[i].name);
1305 	}
1306 	return (NULL);
1307 }
1308 
1309 const char *
1310 pcap_datalink_val_to_description(int dlt)
1311 {
1312 	int i;
1313 
1314 	for (i = 0; dlt_choices[i].name != NULL; i++) {
1315 		if (dlt_choices[i].dlt == dlt)
1316 			return (dlt_choices[i].description);
1317 	}
1318 	return (NULL);
1319 }
1320 
1321 struct tstamp_type_choice {
1322 	const char *name;
1323 	const char *description;
1324 	int	type;
1325 };
1326 
1327 static struct tstamp_type_choice tstamp_type_choices[] = {
1328 	{ "host", "Host", PCAP_TSTAMP_HOST },
1329 	{ "host_lowprec", "Host, low precision", PCAP_TSTAMP_HOST_LOWPREC },
1330 	{ "host_hiprec", "Host, high precision", PCAP_TSTAMP_HOST_HIPREC },
1331 	{ "adapter", "Adapter", PCAP_TSTAMP_ADAPTER },
1332 	{ "adapter_unsynced", "Adapter, not synced with system time", PCAP_TSTAMP_ADAPTER_UNSYNCED },
1333 	{ NULL, NULL, 0 }
1334 };
1335 
1336 int
1337 pcap_tstamp_type_name_to_val(const char *name)
1338 {
1339 	int i;
1340 
1341 	for (i = 0; tstamp_type_choices[i].name != NULL; i++) {
1342 		if (pcap_strcasecmp(tstamp_type_choices[i].name, name) == 0)
1343 			return (tstamp_type_choices[i].type);
1344 	}
1345 	return (PCAP_ERROR);
1346 }
1347 
1348 const char *
1349 pcap_tstamp_type_val_to_name(int tstamp_type)
1350 {
1351 	int i;
1352 
1353 	for (i = 0; tstamp_type_choices[i].name != NULL; i++) {
1354 		if (tstamp_type_choices[i].type == tstamp_type)
1355 			return (tstamp_type_choices[i].name);
1356 	}
1357 	return (NULL);
1358 }
1359 
1360 const char *
1361 pcap_tstamp_type_val_to_description(int tstamp_type)
1362 {
1363 	int i;
1364 
1365 	for (i = 0; tstamp_type_choices[i].name != NULL; i++) {
1366 		if (tstamp_type_choices[i].type == tstamp_type)
1367 			return (tstamp_type_choices[i].description);
1368 	}
1369 	return (NULL);
1370 }
1371 
1372 int
1373 pcap_snapshot(pcap_t *p)
1374 {
1375 	if (!p->activated)
1376 		return (PCAP_ERROR_NOT_ACTIVATED);
1377 	return (p->snapshot);
1378 }
1379 
1380 int
1381 pcap_is_swapped(pcap_t *p)
1382 {
1383 	if (!p->activated)
1384 		return (PCAP_ERROR_NOT_ACTIVATED);
1385 	return (p->swapped);
1386 }
1387 
1388 int
1389 pcap_major_version(pcap_t *p)
1390 {
1391 	if (!p->activated)
1392 		return (PCAP_ERROR_NOT_ACTIVATED);
1393 	return (p->version_major);
1394 }
1395 
1396 int
1397 pcap_minor_version(pcap_t *p)
1398 {
1399 	if (!p->activated)
1400 		return (PCAP_ERROR_NOT_ACTIVATED);
1401 	return (p->version_minor);
1402 }
1403 
1404 FILE *
1405 pcap_file(pcap_t *p)
1406 {
1407 	return (p->rfile);
1408 }
1409 
1410 int
1411 pcap_fileno(pcap_t *p)
1412 {
1413 #ifndef _WIN32
1414 	return (p->fd);
1415 #else
1416 	if (p->adapter != NULL)
1417 		return ((int)(DWORD)p->adapter->hFile);
1418 	else
1419 		return (PCAP_ERROR);
1420 #endif
1421 }
1422 
1423 #if !defined(_WIN32) && !defined(MSDOS)
1424 int
1425 pcap_get_selectable_fd(pcap_t *p)
1426 {
1427 	return (p->selectable_fd);
1428 }
1429 #endif
1430 
1431 void
1432 pcap_perror(pcap_t *p, const char *prefix)
1433 {
1434 	fprintf(stderr, "%s: %s\n", prefix, p->errbuf);
1435 }
1436 
1437 char *
1438 pcap_geterr(pcap_t *p)
1439 {
1440 	return (p->errbuf);
1441 }
1442 
1443 int
1444 pcap_getnonblock(pcap_t *p, char *errbuf)
1445 {
1446 	int ret;
1447 
1448 	ret = p->getnonblock_op(p, errbuf);
1449 	if (ret == -1) {
1450 		/*
1451 		 * In case somebody depended on the bug wherein
1452 		 * the error message was put into p->errbuf
1453 		 * by pcap_getnonblock_fd().
1454 		 */
1455 		strlcpy(p->errbuf, errbuf, PCAP_ERRBUF_SIZE);
1456 	}
1457 	return (ret);
1458 }
1459 
1460 /*
1461  * Get the current non-blocking mode setting, under the assumption that
1462  * it's just the standard POSIX non-blocking flag.
1463  */
1464 #if !defined(_WIN32) && !defined(MSDOS)
1465 int
1466 pcap_getnonblock_fd(pcap_t *p, char *errbuf)
1467 {
1468 	int fdflags;
1469 
1470 	fdflags = fcntl(p->fd, F_GETFL, 0);
1471 	if (fdflags == -1) {
1472 		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "F_GETFL: %s",
1473 		    pcap_strerror(errno));
1474 		return (-1);
1475 	}
1476 	if (fdflags & O_NONBLOCK)
1477 		return (1);
1478 	else
1479 		return (0);
1480 }
1481 #endif
1482 
1483 int
1484 pcap_setnonblock(pcap_t *p, int nonblock, char *errbuf)
1485 {
1486 	int ret;
1487 
1488 	ret = p->setnonblock_op(p, nonblock, errbuf);
1489 	if (ret == -1) {
1490 		/*
1491 		 * In case somebody depended on the bug wherein
1492 		 * the error message was put into p->errbuf
1493 		 * by pcap_setnonblock_fd().
1494 		 */
1495 		strlcpy(p->errbuf, errbuf, PCAP_ERRBUF_SIZE);
1496 	}
1497 	return (ret);
1498 }
1499 
1500 #if !defined(_WIN32) && !defined(MSDOS)
1501 /*
1502  * Set non-blocking mode, under the assumption that it's just the
1503  * standard POSIX non-blocking flag.  (This can be called by the
1504  * per-platform non-blocking-mode routine if that routine also
1505  * needs to do some additional work.)
1506  */
1507 int
1508 pcap_setnonblock_fd(pcap_t *p, int nonblock, char *errbuf)
1509 {
1510 	int fdflags;
1511 
1512 	fdflags = fcntl(p->fd, F_GETFL, 0);
1513 	if (fdflags == -1) {
1514 		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "F_GETFL: %s",
1515 		    pcap_strerror(errno));
1516 		return (-1);
1517 	}
1518 	if (nonblock)
1519 		fdflags |= O_NONBLOCK;
1520 	else
1521 		fdflags &= ~O_NONBLOCK;
1522 	if (fcntl(p->fd, F_SETFL, fdflags) == -1) {
1523 		pcap_snprintf(errbuf, PCAP_ERRBUF_SIZE, "F_SETFL: %s",
1524 		    pcap_strerror(errno));
1525 		return (-1);
1526 	}
1527 	return (0);
1528 }
1529 #endif
1530 
1531 #ifdef _WIN32
1532 /*
1533  * Generate a string for a Win32-specific error (i.e. an error generated when
1534  * calling a Win32 API).
1535  * For errors occurred during standard C calls, we still use pcap_strerror()
1536  */
1537 void
1538 pcap_win32_err_to_str(DWORD error, char *errbuf)
1539 {
1540 	size_t errlen;
1541 	char *p;
1542 
1543 	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM, NULL, error, 0, errbuf,
1544 	    PCAP_ERRBUF_SIZE, NULL);
1545 
1546 	/*
1547 	 * "FormatMessage()" "helpfully" sticks CR/LF at the end of the
1548 	 * message.  Get rid of it.
1549 	 */
1550 	errlen = strlen(errbuf);
1551 	if (errlen >= 2) {
1552 		errbuf[errlen - 1] = '\0';
1553 		errbuf[errlen - 2] = '\0';
1554 	}
1555 	p = strchr(errbuf, '\0');
1556 	pcap_snprintf (p, PCAP_ERRBUF_SIZE+1-(p-errbuf), " (%lu)", error);
1557 }
1558 #endif
1559 
1560 /*
1561  * Generate error strings for PCAP_ERROR_ and PCAP_WARNING_ values.
1562  */
1563 const char *
1564 pcap_statustostr(int errnum)
1565 {
1566 	static char ebuf[15+10+1];
1567 
1568 	switch (errnum) {
1569 
1570 	case PCAP_WARNING:
1571 		return("Generic warning");
1572 
1573 	case PCAP_WARNING_TSTAMP_TYPE_NOTSUP:
1574 		return ("That type of time stamp is not supported by that device");
1575 
1576 	case PCAP_WARNING_PROMISC_NOTSUP:
1577 		return ("That device doesn't support promiscuous mode");
1578 
1579 	case PCAP_ERROR:
1580 		return("Generic error");
1581 
1582 	case PCAP_ERROR_BREAK:
1583 		return("Loop terminated by pcap_breakloop");
1584 
1585 	case PCAP_ERROR_NOT_ACTIVATED:
1586 		return("The pcap_t has not been activated");
1587 
1588 	case PCAP_ERROR_ACTIVATED:
1589 		return ("The setting can't be changed after the pcap_t is activated");
1590 
1591 	case PCAP_ERROR_NO_SUCH_DEVICE:
1592 		return ("No such device exists");
1593 
1594 	case PCAP_ERROR_RFMON_NOTSUP:
1595 		return ("That device doesn't support monitor mode");
1596 
1597 	case PCAP_ERROR_NOT_RFMON:
1598 		return ("That operation is supported only in monitor mode");
1599 
1600 	case PCAP_ERROR_PERM_DENIED:
1601 		return ("You don't have permission to capture on that device");
1602 
1603 	case PCAP_ERROR_IFACE_NOT_UP:
1604 		return ("That device is not up");
1605 
1606 	case PCAP_ERROR_CANTSET_TSTAMP_TYPE:
1607 		return ("That device doesn't support setting the time stamp type");
1608 
1609 	case PCAP_ERROR_PROMISC_PERM_DENIED:
1610 		return ("You don't have permission to capture in promiscuous mode on that device");
1611 
1612 	case PCAP_ERROR_TSTAMP_PRECISION_NOTSUP:
1613 		return ("That device doesn't support that time stamp precision");
1614 	}
1615 	(void)pcap_snprintf(ebuf, sizeof ebuf, "Unknown error: %d", errnum);
1616 	return(ebuf);
1617 }
1618 
1619 /*
1620  * Not all systems have strerror().
1621  */
1622 const char *
1623 pcap_strerror(int errnum)
1624 {
1625 #ifdef HAVE_STRERROR
1626 #ifdef _WIN32
1627 	static char errbuf[PCAP_ERRBUF_SIZE];
1628 	errno_t errno;
1629 	errno = strerror_s(errbuf, PCAP_ERRBUF_SIZE, errnum);
1630 	if (errno != 0) /* errno = 0 if successful */
1631 		strlcpy(errbuf, "strerror_s() error", PCAP_ERRBUF_SIZE);
1632 	return (errbuf);
1633 #else
1634 	return (strerror(errnum));
1635 #endif /* _WIN32 */
1636 #else
1637 	extern int sys_nerr;
1638 	extern const char *const sys_errlist[];
1639 	static char errbuf[PCAP_ERRBUF_SIZE];
1640 
1641 	if ((unsigned int)errnum < sys_nerr)
1642 		return ((char *)sys_errlist[errnum]);
1643 	(void)pcap_snprintf(errbuf, sizeof errbuf, "Unknown error: %d", errnum);
1644 	return (errbuf);
1645 #endif
1646 }
1647 
1648 int
1649 pcap_setfilter(pcap_t *p, struct bpf_program *fp)
1650 {
1651 	return (p->setfilter_op(p, fp));
1652 }
1653 
1654 /*
1655  * Set direction flag, which controls whether we accept only incoming
1656  * packets, only outgoing packets, or both.
1657  * Note that, depending on the platform, some or all direction arguments
1658  * might not be supported.
1659  */
1660 int
1661 pcap_setdirection(pcap_t *p, pcap_direction_t d)
1662 {
1663 	if (p->setdirection_op == NULL) {
1664 		pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1665 		    "Setting direction is not implemented on this platform");
1666 		return (-1);
1667 	} else
1668 		return (p->setdirection_op(p, d));
1669 }
1670 
1671 int
1672 pcap_stats(pcap_t *p, struct pcap_stat *ps)
1673 {
1674 	return (p->stats_op(p, ps));
1675 }
1676 
1677 static int
1678 pcap_stats_dead(pcap_t *p, struct pcap_stat *ps _U_)
1679 {
1680 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1681 	    "Statistics aren't available from a pcap_open_dead pcap_t");
1682 	return (-1);
1683 }
1684 
1685 #ifdef _WIN32
1686 struct pcap_stat *
1687 pcap_stats_ex(pcap_t *p, int *pcap_stat_size)
1688 {
1689 	return (p->stats_ex_op(p, pcap_stat_size));
1690 }
1691 
1692 int
1693 pcap_setbuff(pcap_t *p, int dim)
1694 {
1695 	return (p->setbuff_op(p, dim));
1696 }
1697 
1698 static int
1699 pcap_setbuff_dead(pcap_t *p, int dim)
1700 {
1701 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1702 	    "The kernel buffer size cannot be set on a pcap_open_dead pcap_t");
1703 	return (-1);
1704 }
1705 
1706 int
1707 pcap_setmode(pcap_t *p, int mode)
1708 {
1709 	return (p->setmode_op(p, mode));
1710 }
1711 
1712 static int
1713 pcap_setmode_dead(pcap_t *p, int mode)
1714 {
1715 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1716 	    "impossible to set mode on a pcap_open_dead pcap_t");
1717 	return (-1);
1718 }
1719 
1720 int
1721 pcap_setmintocopy(pcap_t *p, int size)
1722 {
1723 	return (p->setmintocopy_op(p, size));
1724 }
1725 
1726 static int
1727 pcap_setmintocopy_dead(pcap_t *p, int size)
1728 {
1729 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1730 	    "The mintocopy parameter cannot be set on a pcap_open_dead pcap_t");
1731 	return (-1);
1732 }
1733 
1734 HANDLE
1735 pcap_getevent(pcap_t *p)
1736 {
1737 	return (p->getevent_op(p));
1738 }
1739 
1740 static HANDLE
1741 pcap_getevent_dead(pcap_t *p)
1742 {
1743 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1744 	    "A pcap_open_dead pcap_t has no event handle");
1745 	return (INVALID_HANDLE_VALUE);
1746 }
1747 
1748 int
1749 pcap_oid_get_request(pcap_t *p, bpf_u_int32 oid, void *data, size_t *lenp)
1750 {
1751 	return (p->oid_get_request_op(p, oid, data, lenp));
1752 }
1753 
1754 static int
1755 pcap_oid_get_request_dead(pcap_t *p, bpf_u_int32 oid _U_, void *data _U_,
1756     size_t *lenp _U_)
1757 {
1758 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1759 	    "An OID get request cannot be performed on a pcap_open_dead pcap_t");
1760 	return (PCAP_ERROR);
1761 }
1762 
1763 int
1764 pcap_oid_set_request(pcap_t *p, bpf_u_int32 oid, const void *data, size_t *lenp)
1765 {
1766 	return (p->oid_set_request_op(p, oid, data, lenp));
1767 }
1768 
1769 static int
1770 pcap_oid_set_request_dead(pcap_t *p, bpf_u_int32 oid _U_, const void *data _U_,
1771     size_t *lenp _U_)
1772 {
1773 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1774 	    "An OID set request cannot be performed on a pcap_open_dead pcap_t");
1775 	return (PCAP_ERROR);
1776 }
1777 
1778 pcap_send_queue *
1779 pcap_sendqueue_alloc(u_int memsize)
1780 {
1781 	pcap_send_queue *tqueue;
1782 
1783 	/* Allocate the queue */
1784 	tqueue = (pcap_send_queue *)malloc(sizeof(pcap_send_queue));
1785 	if (tqueue == NULL){
1786 		return (NULL);
1787 	}
1788 
1789 	/* Allocate the buffer */
1790 	tqueue->buffer = (char *)malloc(memsize);
1791 	if (tqueue->buffer == NULL) {
1792 		free(tqueue);
1793 		return (NULL);
1794 	}
1795 
1796 	tqueue->maxlen = memsize;
1797 	tqueue->len = 0;
1798 
1799 	return (tqueue);
1800 }
1801 
1802 void
1803 pcap_sendqueue_destroy(pcap_send_queue *queue)
1804 {
1805 	free(queue->buffer);
1806 	free(queue);
1807 }
1808 
1809 int
1810 pcap_sendqueue_queue(pcap_send_queue *queue, const struct pcap_pkthdr *pkt_header, const u_char *pkt_data)
1811 {
1812 	if (queue->len + sizeof(struct pcap_pkthdr) + pkt_header->caplen > queue->maxlen){
1813 		return (-1);
1814 	}
1815 
1816 	/* Copy the pcap_pkthdr header*/
1817 	memcpy(queue->buffer + queue->len, pkt_header, sizeof(struct pcap_pkthdr));
1818 	queue->len += sizeof(struct pcap_pkthdr);
1819 
1820 	/* copy the packet */
1821 	memcpy(queue->buffer + queue->len, pkt_data, pkt_header->caplen);
1822 	queue->len += pkt_header->caplen;
1823 
1824 	return (0);
1825 }
1826 
1827 u_int
1828 pcap_sendqueue_transmit(pcap_t *p, pcap_send_queue *queue, int sync)
1829 {
1830 	return (p->sendqueue_transmit_op(p, queue, sync));
1831 }
1832 
1833 static u_int
1834 pcap_sendqueue_transmit_dead(pcap_t *p, pcap_send_queue *queue, int sync)
1835 {
1836 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1837 	    "Packets cannot be transmitted on a pcap_open_dead pcap_t");
1838 	return (0);
1839 }
1840 
1841 int
1842 pcap_setuserbuffer(pcap_t *p, int size)
1843 {
1844 	return (p->setuserbuffer_op(p, size));
1845 }
1846 
1847 static int
1848 pcap_setuserbuffer_dead(pcap_t *p, int size)
1849 {
1850 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1851 	    "The user buffer cannot be set on a pcap_open_dead pcap_t");
1852 	return (-1);
1853 }
1854 
1855 int
1856 pcap_live_dump(pcap_t *p, char *filename, int maxsize, int maxpacks)
1857 {
1858 	return (p->live_dump_op(p, filename, maxsize, maxpacks));
1859 }
1860 
1861 static int
1862 pcap_live_dump_dead(pcap_t *p, char *filename, int maxsize, int maxpacks)
1863 {
1864 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1865 	    "Live packet dumping cannot be performed on a pcap_open_dead pcap_t");
1866 	return (-1);
1867 }
1868 
1869 int
1870 pcap_live_dump_ended(pcap_t *p, int sync)
1871 {
1872 	return (p->live_dump_ended_op(p, sync));
1873 }
1874 
1875 static int
1876 pcap_live_dump_ended_dead(pcap_t *p, int sync)
1877 {
1878 	pcap_snprintf(p->errbuf, PCAP_ERRBUF_SIZE,
1879 	    "Live packet dumping cannot be performed on a pcap_open_dead pcap_t");
1880 	return (-1);
1881 }
1882 
1883 PAirpcapHandle
1884 pcap_get_airpcap_handle(pcap_t *p)
1885 {
1886 	PAirpcapHandle handle;
1887 
1888 	handle = p->get_airpcap_handle_op(p);
1889 	if (handle == NULL) {
1890 		(void)pcap_snprintf(p->errbuf, sizeof(p->errbuf),
1891 		    "This isn't an AirPcap device");
1892 	}
1893 	return (handle);
1894 }
1895 
1896 static PAirpcapHandle
1897 pcap_get_airpcap_handle_dead(pcap_t *p)
1898 {
1899 	return (NULL);
1900 }
1901 #endif
1902 
1903 /*
1904  * On some platforms, we need to clean up promiscuous or monitor mode
1905  * when we close a device - and we want that to happen even if the
1906  * application just exits without explicitl closing devices.
1907  * On those platforms, we need to register a "close all the pcaps"
1908  * routine to be called when we exit, and need to maintain a list of
1909  * pcaps that need to be closed to clean up modes.
1910  *
1911  * XXX - not thread-safe.
1912  */
1913 
1914 /*
1915  * List of pcaps on which we've done something that needs to be
1916  * cleaned up.
1917  * If there are any such pcaps, we arrange to call "pcap_close_all()"
1918  * when we exit, and have it close all of them.
1919  */
1920 static struct pcap *pcaps_to_close;
1921 
1922 /*
1923  * TRUE if we've already called "atexit()" to cause "pcap_close_all()" to
1924  * be called on exit.
1925  */
1926 static int did_atexit;
1927 
1928 static void
1929 pcap_close_all(void)
1930 {
1931 	struct pcap *handle;
1932 
1933 	while ((handle = pcaps_to_close) != NULL)
1934 		pcap_close(handle);
1935 }
1936 
1937 int
1938 pcap_do_addexit(pcap_t *p)
1939 {
1940 	/*
1941 	 * If we haven't already done so, arrange to have
1942 	 * "pcap_close_all()" called when we exit.
1943 	 */
1944 	if (!did_atexit) {
1945 		if (atexit(pcap_close_all) != 0) {
1946 			/*
1947 			 * "atexit()" failed; let our caller know.
1948 			 */
1949 			strlcpy(p->errbuf, "atexit failed", PCAP_ERRBUF_SIZE);
1950 			return (0);
1951 		}
1952 		did_atexit = 1;
1953 	}
1954 	return (1);
1955 }
1956 
1957 void
1958 pcap_add_to_pcaps_to_close(pcap_t *p)
1959 {
1960 	p->next = pcaps_to_close;
1961 	pcaps_to_close = p;
1962 }
1963 
1964 void
1965 pcap_remove_from_pcaps_to_close(pcap_t *p)
1966 {
1967 	pcap_t *pc, *prevpc;
1968 
1969 	for (pc = pcaps_to_close, prevpc = NULL; pc != NULL;
1970 	    prevpc = pc, pc = pc->next) {
1971 		if (pc == p) {
1972 			/*
1973 			 * Found it.  Remove it from the list.
1974 			 */
1975 			if (prevpc == NULL) {
1976 				/*
1977 				 * It was at the head of the list.
1978 				 */
1979 				pcaps_to_close = pc->next;
1980 			} else {
1981 				/*
1982 				 * It was in the middle of the list.
1983 				 */
1984 				prevpc->next = pc->next;
1985 			}
1986 			break;
1987 		}
1988 	}
1989 }
1990 
1991 void
1992 pcap_cleanup_live_common(pcap_t *p)
1993 {
1994 	if (p->buffer != NULL) {
1995 		free(p->buffer);
1996 		p->buffer = NULL;
1997 	}
1998 	if (p->dlt_list != NULL) {
1999 		free(p->dlt_list);
2000 		p->dlt_list = NULL;
2001 		p->dlt_count = 0;
2002 	}
2003 	if (p->tstamp_type_list != NULL) {
2004 		free(p->tstamp_type_list);
2005 		p->tstamp_type_list = NULL;
2006 		p->tstamp_type_count = 0;
2007 	}
2008 	if (p->tstamp_precision_list != NULL) {
2009 		free(p->tstamp_precision_list);
2010 		p->tstamp_precision_list = NULL;
2011 		p->tstamp_precision_count = 0;
2012 	}
2013 	pcap_freecode(&p->fcode);
2014 #if !defined(_WIN32) && !defined(MSDOS)
2015 	if (p->fd >= 0) {
2016 		close(p->fd);
2017 		p->fd = -1;
2018 	}
2019 	p->selectable_fd = -1;
2020 #endif
2021 }
2022 
2023 static void
2024 pcap_cleanup_dead(pcap_t *p _U_)
2025 {
2026 	/* Nothing to do. */
2027 }
2028 
2029 pcap_t *
2030 pcap_open_dead_with_tstamp_precision(int linktype, int snaplen, u_int precision)
2031 {
2032 	pcap_t *p;
2033 
2034 	switch (precision) {
2035 
2036 	case PCAP_TSTAMP_PRECISION_MICRO:
2037 	case PCAP_TSTAMP_PRECISION_NANO:
2038 		break;
2039 
2040 	default:
2041 		return NULL;
2042 	}
2043 	p = malloc(sizeof(*p));
2044 	if (p == NULL)
2045 		return NULL;
2046 	memset (p, 0, sizeof(*p));
2047 	p->snapshot = snaplen;
2048 	p->linktype = linktype;
2049 	p->opt.tstamp_precision = precision;
2050 	p->stats_op = pcap_stats_dead;
2051 #ifdef _WIN32
2052 	p->stats_ex_op = (stats_ex_op_t)pcap_not_initialized_ptr;
2053 	p->setbuff_op = pcap_setbuff_dead;
2054 	p->setmode_op = pcap_setmode_dead;
2055 	p->setmintocopy_op = pcap_setmintocopy_dead;
2056 	p->getevent_op = pcap_getevent_dead;
2057 	p->oid_get_request_op = pcap_oid_get_request_dead;
2058 	p->oid_set_request_op = pcap_oid_set_request_dead;
2059 	p->sendqueue_transmit_op = pcap_sendqueue_transmit_dead;
2060 	p->setuserbuffer_op = pcap_setuserbuffer_dead;
2061 	p->live_dump_op = pcap_live_dump_dead;
2062 	p->live_dump_ended_op = pcap_live_dump_ended_dead;
2063 	p->get_airpcap_handle_op = pcap_get_airpcap_handle_dead;
2064 #endif
2065 	p->cleanup_op = pcap_cleanup_dead;
2066 
2067 	/*
2068 	 * A "dead" pcap_t never requires special BPF code generation.
2069 	 */
2070 	p->bpf_codegen_flags = 0;
2071 
2072 	p->activated = 1;
2073 	return (p);
2074 }
2075 
2076 pcap_t *
2077 pcap_open_dead(int linktype, int snaplen)
2078 {
2079 	return (pcap_open_dead_with_tstamp_precision(linktype, snaplen,
2080 	    PCAP_TSTAMP_PRECISION_MICRO));
2081 }
2082 
2083 /*
2084  * API compatible with WinPcap's "send a packet" routine - returns -1
2085  * on error, 0 otherwise.
2086  *
2087  * XXX - what if we get a short write?
2088  */
2089 int
2090 pcap_sendpacket(pcap_t *p, const u_char *buf, int size)
2091 {
2092 	if (p->inject_op(p, buf, size) == -1)
2093 		return (-1);
2094 	return (0);
2095 }
2096 
2097 /*
2098  * API compatible with OpenBSD's "send a packet" routine - returns -1 on
2099  * error, number of bytes written otherwise.
2100  */
2101 int
2102 pcap_inject(pcap_t *p, const void *buf, size_t size)
2103 {
2104 	return (p->inject_op(p, buf, size));
2105 }
2106 
2107 void
2108 pcap_close(pcap_t *p)
2109 {
2110 	if (p->opt.device != NULL)
2111 		free(p->opt.device);
2112 	p->cleanup_op(p);
2113 	free(p);
2114 }
2115 
2116 /*
2117  * Given a BPF program, a pcap_pkthdr structure for a packet, and the raw
2118  * data for the packet, check whether the packet passes the filter.
2119  * Returns the return value of the filter program, which will be zero if
2120  * the packet doesn't pass and non-zero if the packet does pass.
2121  */
2122 int
2123 pcap_offline_filter(const struct bpf_program *fp, const struct pcap_pkthdr *h,
2124     const u_char *pkt)
2125 {
2126 	const struct bpf_insn *fcode = fp->bf_insns;
2127 
2128 	if (fcode != NULL)
2129 		return (bpf_filter(fcode, pkt, h->len, h->caplen));
2130 	else
2131 		return (0);
2132 }
2133 
2134 #include "pcap_version.h"
2135 
2136 #ifdef _WIN32
2137 
2138 static char *full_pcap_version_string;
2139 
2140 #ifdef HAVE_VERSION_H
2141 /*
2142  * libpcap being built for Windows, as part of a WinPcap/Npcap source
2143  * tree.  Include version.h from that source tree to get the WinPcap/Npcap
2144  * version.
2145  *
2146  * XXX - it'd be nice if we could somehow generate the WinPcap version number
2147  * when building WinPcap.  (It'd be nice to do so for the packet.dll version
2148  * number as well.)
2149  */
2150 #include "../../version.h"
2151 
2152 static const char wpcap_version_string[] = WINPCAP_VER_STRING;
2153 static const char pcap_version_string_fmt[] =
2154 	WINPCAP_PRODUCT_NAME " version %s, based on %s";
2155 static const char pcap_version_string_packet_dll_fmt[] =
2156 	WINPCAP_PRODUCT_NAME " version %s (packet.dll version %s), based on %s";
2157 
2158 const char *
2159 pcap_lib_version(void)
2160 {
2161 	char *packet_version_string;
2162 	size_t full_pcap_version_string_len;
2163 
2164 	if (full_pcap_version_string == NULL) {
2165 		/*
2166 		 * Generate the version string.
2167 		 */
2168 		packet_version_string = PacketGetVersion();
2169 		if (strcmp(wpcap_version_string, packet_version_string) == 0) {
2170 			/*
2171 			 * WinPcap version string and packet.dll version
2172 			 * string are the same; just report the WinPcap
2173 			 * version.
2174 			 */
2175 			full_pcap_version_string_len =
2176 			    (sizeof pcap_version_string_fmt - 4) +
2177 			    strlen(wpcap_version_string) +
2178 			    strlen(pcap_version_string);
2179 			full_pcap_version_string =
2180 			    malloc(full_pcap_version_string_len);
2181 			if (full_pcap_version_string == NULL)
2182 				return (NULL);
2183 			pcap_snprintf(full_pcap_version_string,
2184 			    full_pcap_version_string_len,
2185 			    pcap_version_string_fmt,
2186 			    wpcap_version_string,
2187 			    pcap_version_string);
2188 		} else {
2189 			/*
2190 			 * WinPcap version string and packet.dll version
2191 			 * string are different; that shouldn't be the
2192 			 * case (the two libraries should come from the
2193 			 * same version of WinPcap), so we report both
2194 			 * versions.
2195 			 */
2196 			full_pcap_version_string_len =
2197 			    (sizeof pcap_version_string_packet_dll_fmt - 6) +
2198 			    strlen(wpcap_version_string) +
2199 			    strlen(packet_version_string) +
2200 			    strlen(pcap_version_string);
2201 			full_pcap_version_string = malloc(full_pcap_version_string_len);
2202 			if (full_pcap_version_string == NULL)
2203 				return (NULL);
2204 			pcap_snprintf(full_pcap_version_string,
2205 			    full_pcap_version_string_len,
2206 			    pcap_version_string_packet_dll_fmt,
2207 			    wpcap_version_string,
2208 			    packet_version_string,
2209 			    pcap_version_string);
2210 		}
2211 	}
2212 	return (full_pcap_version_string);
2213 }
2214 
2215 #else /* HAVE_VERSION_H */
2216 
2217 /*
2218  * libpcap being built for Windows, not as part of a WinPcap/Npcap source
2219  * tree.
2220  */
2221 static const char pcap_version_string_packet_dll_fmt[] =
2222 	"%s (packet.dll version %s)";
2223 const char *
2224 pcap_lib_version(void)
2225 {
2226 	char *packet_version_string;
2227 	size_t full_pcap_version_string_len;
2228 
2229 	if (full_pcap_version_string == NULL) {
2230 		/*
2231 		 * Generate the version string.  Report the packet.dll
2232 		 * version.
2233 		 */
2234 		packet_version_string = PacketGetVersion();
2235 		full_pcap_version_string_len =
2236 		    (sizeof pcap_version_string_packet_dll_fmt - 4) +
2237 		    strlen(pcap_version_string) +
2238 		    strlen(packet_version_string);
2239 		full_pcap_version_string = malloc(full_pcap_version_string_len);
2240 		if (full_pcap_version_string == NULL)
2241 			return (NULL);
2242 		pcap_snprintf(full_pcap_version_string,
2243 		    full_pcap_version_string_len,
2244 		    pcap_version_string_packet_dll_fmt,
2245 		    pcap_version_string,
2246 		    packet_version_string);
2247 	}
2248 	return (full_pcap_version_string);
2249 }
2250 
2251 #endif /* HAVE_VERSION_H */
2252 
2253 #elif defined(MSDOS)
2254 
2255 static char *full_pcap_version_string;
2256 
2257 const char *
2258 pcap_lib_version (void)
2259 {
2260 	char *packet_version_string;
2261 	size_t full_pcap_version_string_len;
2262 	static char dospfx[] = "DOS-";
2263 
2264 	if (full_pcap_version_string == NULL) {
2265 		/*
2266 		 * Generate the version string.
2267 		 */
2268 		full_pcap_version_string_len =
2269 		    sizeof dospfx + strlen(pcap_version_string);
2270 		full_pcap_version_string =
2271 		    malloc(full_pcap_version_string_len);
2272 		if (full_pcap_version_string == NULL)
2273 			return (NULL);
2274 		strcpy(full_pcap_version_string, dospfx);
2275 		strcat(full_pcap_version_string, pcap_version_string);
2276 	}
2277 	return (full_pcap_version_string);
2278 }
2279 
2280 #else /* UN*X */
2281 
2282 const char *
2283 pcap_lib_version(void)
2284 {
2285 	return (pcap_version_string);
2286 }
2287 #endif
2288 
2289 #ifdef YYDEBUG
2290 /*
2291  * Set the internal "debug printout" flag for the filter expression parser.
2292  * The code to print that stuff is present only if YYDEBUG is defined, so
2293  * the flag, and the routine to set it, are defined only if YYDEBUG is
2294  * defined.
2295  *
2296  * This is intended for libpcap developers, not for general use.
2297  * If you want to set these in a program, you'll have to declare this
2298  * routine yourself, with the appropriate DLL import attribute on Windows;
2299  * it's not declared in any header file, and won't be declared in any
2300  * header file provided by libpcap.
2301  */
2302 PCAP_API void pcap_set_parser_debug(int value);
2303 
2304 PCAP_API_DEF void
2305 pcap_set_parser_debug(int value)
2306 {
2307 	extern int pcap_debug;
2308 
2309 	pcap_debug = value;
2310 }
2311 #endif
2312 
2313 #ifdef BDEBUG
2314 /*
2315  * Set the internal "debug printout" flag for the filter expression optimizer.
2316  * The code to print that stuff is present only if BDEBUG is defined, so
2317  * the flag, and the routine to set it, are defined only if BDEBUG is
2318  * defined.
2319  *
2320  * This is intended for libpcap developers, not for general use.
2321  * If you want to set these in a program, you'll have to declare this
2322  * routine yourself, with the appropriate DLL import attribute on Windows;
2323  * it's not declared in any header file, and won't be declared in any
2324  * header file provided by libpcap.
2325  */
2326 PCAP_API void pcap_set_optimizer_debug(int value);
2327 
2328 PCAP_API_DEF void
2329 pcap_set_optimizer_debug(int value)
2330 {
2331 	extern int pcap_optimizer_debug;
2332 
2333 	pcap_optimizer_debug = value;
2334 }
2335 #endif
2336