1 /* 2 * Copyright (C) 1984-2011 Mark Nudelman 3 * 4 * You may distribute under the terms of either the GNU General Public 5 * License or the Less License, as specified in the README file. 6 * 7 * For more information about less, or for information on how to 8 * contact the author, see the README file. 9 */ 10 11 12 /* 13 * Routines which jump to a new location in the file. 14 */ 15 16 #include "less.h" 17 #include "position.h" 18 19 extern int jump_sline; 20 extern int squished; 21 extern int screen_trashed; 22 extern int sc_width, sc_height; 23 extern int show_attn; 24 extern int top_scroll; 25 26 /* 27 * Jump to the end of the file. 28 */ 29 public void 30 jump_forw() 31 { 32 POSITION pos; 33 POSITION end_pos; 34 35 if (ch_end_seek()) 36 { 37 error("Cannot seek to end of file", NULL_PARG); 38 return; 39 } 40 /* 41 * Note; lastmark will be called later by jump_loc, but it fails 42 * because the position table has been cleared by pos_clear below. 43 * So call it here before calling pos_clear. 44 */ 45 lastmark(); 46 /* 47 * Position the last line in the file at the last screen line. 48 * Go back one line from the end of the file 49 * to get to the beginning of the last line. 50 */ 51 pos_clear(); 52 end_pos = ch_tell(); 53 pos = back_line(end_pos); 54 if (pos == NULL_POSITION) 55 jump_loc((POSITION)0, sc_height-1); 56 else 57 { 58 jump_loc(pos, sc_height-1); 59 if (position(sc_height-1) != end_pos) 60 repaint(); 61 } 62 } 63 64 /* 65 * Jump to line n in the file. 66 */ 67 public void 68 jump_back(linenum) 69 LINENUM linenum; 70 { 71 POSITION pos; 72 PARG parg; 73 74 /* 75 * Find the position of the specified line. 76 * If we can seek there, just jump to it. 77 * If we can't seek, but we're trying to go to line number 1, 78 * use ch_beg_seek() to get as close as we can. 79 */ 80 pos = find_pos(linenum); 81 if (pos != NULL_POSITION && ch_seek(pos) == 0) 82 { 83 if (show_attn) 84 set_attnpos(pos); 85 jump_loc(pos, jump_sline); 86 } else if (linenum <= 1 && ch_beg_seek() == 0) 87 { 88 jump_loc(ch_tell(), jump_sline); 89 error("Cannot seek to beginning of file", NULL_PARG); 90 } else 91 { 92 parg.p_linenum = linenum; 93 error("Cannot seek to line number %n", &parg); 94 } 95 } 96 97 /* 98 * Repaint the screen. 99 */ 100 public void 101 repaint() 102 { 103 struct scrpos scrpos; 104 /* 105 * Start at the line currently at the top of the screen 106 * and redisplay the screen. 107 */ 108 get_scrpos(&scrpos); 109 pos_clear(); 110 jump_loc(scrpos.pos, scrpos.ln); 111 } 112 113 /* 114 * Jump to a specified percentage into the file. 115 */ 116 public void 117 jump_percent(percent, fraction) 118 int percent; 119 long fraction; 120 { 121 POSITION pos, len; 122 123 /* 124 * Determine the position in the file 125 * (the specified percentage of the file's length). 126 */ 127 if ((len = ch_length()) == NULL_POSITION) 128 { 129 ierror("Determining length of file", NULL_PARG); 130 ch_end_seek(); 131 } 132 if ((len = ch_length()) == NULL_POSITION) 133 { 134 error("Don't know length of file", NULL_PARG); 135 return; 136 } 137 pos = percent_pos(len, percent, fraction); 138 if (pos >= len) 139 pos = len-1; 140 141 jump_line_loc(pos, jump_sline); 142 } 143 144 /* 145 * Jump to a specified position in the file. 146 * Like jump_loc, but the position need not be 147 * the first character in a line. 148 */ 149 public void 150 jump_line_loc(pos, sline) 151 POSITION pos; 152 int sline; 153 { 154 int c; 155 156 if (ch_seek(pos) == 0) 157 { 158 /* 159 * Back up to the beginning of the line. 160 */ 161 while ((c = ch_back_get()) != '\n' && c != EOI) 162 ; 163 if (c == '\n') 164 (void) ch_forw_get(); 165 pos = ch_tell(); 166 } 167 if (show_attn) 168 set_attnpos(pos); 169 jump_loc(pos, sline); 170 } 171 172 /* 173 * Jump to a specified position in the file. 174 * The position must be the first character in a line. 175 * Place the target line on a specified line on the screen. 176 */ 177 public void 178 jump_loc(pos, sline) 179 POSITION pos; 180 int sline; 181 { 182 register int nline; 183 POSITION tpos; 184 POSITION bpos; 185 186 /* 187 * Normalize sline. 188 */ 189 sline = adjsline(sline); 190 191 if ((nline = onscreen(pos)) >= 0) 192 { 193 /* 194 * The line is currently displayed. 195 * Just scroll there. 196 */ 197 nline -= sline; 198 if (nline > 0) 199 forw(nline, position(BOTTOM_PLUS_ONE), 1, 0, 0); 200 else 201 back(-nline, position(TOP), 1, 0); 202 #if HILITE_SEARCH 203 if (show_attn) 204 repaint_hilite(1); 205 #endif 206 return; 207 } 208 209 /* 210 * Line is not on screen. 211 * Seek to the desired location. 212 */ 213 if (ch_seek(pos)) 214 { 215 error("Cannot seek to that file position", NULL_PARG); 216 return; 217 } 218 219 /* 220 * See if the desired line is before or after 221 * the currently displayed screen. 222 */ 223 tpos = position(TOP); 224 bpos = position(BOTTOM_PLUS_ONE); 225 if (tpos == NULL_POSITION || pos >= tpos) 226 { 227 /* 228 * The desired line is after the current screen. 229 * Move back in the file far enough so that we can 230 * call forw() and put the desired line at the 231 * sline-th line on the screen. 232 */ 233 for (nline = 0; nline < sline; nline++) 234 { 235 if (bpos != NULL_POSITION && pos <= bpos) 236 { 237 /* 238 * Surprise! The desired line is 239 * close enough to the current screen 240 * that we can just scroll there after all. 241 */ 242 forw(sc_height-sline+nline-1, bpos, 1, 0, 0); 243 #if HILITE_SEARCH 244 if (show_attn) 245 repaint_hilite(1); 246 #endif 247 return; 248 } 249 pos = back_line(pos); 250 if (pos == NULL_POSITION) 251 { 252 /* 253 * Oops. Ran into the beginning of the file. 254 * Exit the loop here and rely on forw() 255 * below to draw the required number of 256 * blank lines at the top of the screen. 257 */ 258 break; 259 } 260 } 261 lastmark(); 262 squished = 0; 263 screen_trashed = 0; 264 forw(sc_height-1, pos, 1, 0, sline-nline); 265 } else 266 { 267 /* 268 * The desired line is before the current screen. 269 * Move forward in the file far enough so that we 270 * can call back() and put the desired line at the 271 * sline-th line on the screen. 272 */ 273 for (nline = sline; nline < sc_height - 1; nline++) 274 { 275 pos = forw_line(pos); 276 if (pos == NULL_POSITION) 277 { 278 /* 279 * Ran into end of file. 280 * This shouldn't normally happen, 281 * but may if there is some kind of read error. 282 */ 283 break; 284 } 285 if (pos >= tpos) 286 { 287 /* 288 * Surprise! The desired line is 289 * close enough to the current screen 290 * that we can just scroll there after all. 291 */ 292 back(nline+1, tpos, 1, 0); 293 #if HILITE_SEARCH 294 if (show_attn) 295 repaint_hilite(1); 296 #endif 297 return; 298 } 299 } 300 lastmark(); 301 if (!top_scroll) 302 clear(); 303 else 304 home(); 305 screen_trashed = 0; 306 add_back_pos(pos); 307 back(sc_height-1, pos, 1, 0); 308 } 309 } 310